Testometric ™
Description
Construction
Range kN
Accuracy
Box compression tester with integral Pc
and software dedicated to testing
corrugated board boxes and cartons.
Rigid Moving platen driven by 4
recirculating ballscrews. Platen parallelism
better than 1:4000. Load readings are taken
from an average of 4 balanced load cells to
compensate for the effect of any off centre
loading.
25
+/-0.5% of reading down to 1/1000th of load
cell capacity
Vertical space mm
Crosshead
travel/resolution mm
Platen size mm
25
Max speed at full
load mm/min
500
Max carton size mm
Data sampling rate
Weight kg
1000 × 1000
Electrical supply
75
0.001 to 500
+/-0.1% under stable conditions
Linear slides integral within
column
Max force at full
speed kN
Overall width does not
include display.
1050 by 0.001
Unit 1 Lincoln Business Park Lincoln Close,
Rochdale, Lancashire, England OL11 1NR
Crosshead guidance
Overall Dimension
W×D×H
1100
Frame stiffness kN/mm
Speed range mm/min
Speed accuracy
25AT BOX C
Operating temp
degree C
Operating humidity
Number of Columns
1000 × 1000 × 1000
Maximum 12kHz with up to
200Hz data frames.
1420 × 1020 × 2000
820
Universal input.
(de-rate max speed at 115V)
-10 to +40
+10 to +90% non-condensing
4
Tel: (44) (0)1706 654039 Fax: (44) (0)1706 646089
Email: info@testometric.co.uk website: www.testometric.co.uk
Testometric ™
25AT BOX C
Machine Features
• Integral PC system running full universal windows software with industry standard and customer specific test methods
pre-installed.
• Touch screen display with active tester control panel and readout screen showing real time test curves calculated
results and statistics. Height adjustable and fully articulated.
• Optional full colour printer system mounted on universal position swivel arm.
• Fully digital testing system with high precision control and accuracy, includes automated computer control of test
methods giving simplicity of operation.
th
• Four averaging high resolution auto ranging load cells with accuracies better than +/-0.5% down to 1/1000 of the load
cell capacity.
• Automatic recognition and calibration of load cell and extensometers, with instant calibration check facility.
• 800% overload capability of load cells without damage.
• Compact design, giving economy of floor space.
• Four high efficiency pre-loaded self clearing ballscrews for fast, quiet testing. Fitted with sealed for life lubricated end
bearings.
• Crosshead guidance system providing precise alignment and smooth running.
• Precision crosshead control via digital AC servo drive and brushless servo motor giving maintenance free operation
and 4,000,000 steps per revolution positional control.
• High speed data collection systems for up to 4 synchronous channels.
• 6 I/O channels for additional devices such as extensometers, micrometers, callipers, balances, etc.
• High stiffness loading frames with specialised steel crossheads and rigid extruded support columns with T-slots for
accessory mounting.
• Overload, overtravel and impact protection.
• Telescopic covers giving additional protection for ballscrews against dust and testing debris.
Force Measurement
Universally calibrated, better than Grade 0.5 EN 7500-1, D IN 51221 ASTM E-4. AFNOR A03-501. Range 0.4% to 100%
minimum. Automatic identification of load cell. Resolution 1 part in 500000 with autoranging. Electronic load cell
protection.
Extension Measurement
Full frame length to 0.001mm. Resolution 0.001 min. Accuracy 0.01mm. Absolute, relative and auxiliary modes mm, inch
and percent. Programmable extension limits.
Speed Control
Drive system temperature and current protection. Positional jog speed 0.001mm/min to maximum. Speed setting
increments 0.001mm/min.
Load Frame
Rigid frame, using dual slide crosshead guidance system and rigid support column. Frame stiffness 75kN/mm plus K
factor facility built-in. Re-circulating ballscrew with bellows. Electronic limit strips, total travel trips and customer
programmable safety stops.
Software
tm
Comprehensive winTest Analysis universal windows software covering, tensile, compression, peel, shear, tear, cyclic,
creep and multi stage testing. It includes a wide range of industry standard test methods and facility to create and store an
unlimited number of further test methods. There is automated storage of all test data and ease of export to other software
tm
packages such as word, excel, access and SPC systems for enhanced report generation. winTest Reports is
enhancement of winTest Analysis to add flexibility to data analysis and statistical reporting. The package provides a report
generation capabilty that can include long-term statistics and control charts for all specified calculations. winTest
tm
Reports can also be configured to display headings, titles, company logos, graphs, charts, pop-up menus and specific
technical information.
Options
In addition to standard fixtures we can test your specimens in our applications laboratory and design special grips and
fixtures for custom applications. Models are available with extended frames and wider throat.
CE Marking
Conforms to all relevant European standards with UKAS certification.
Environmental
Energy efficient, lead-free and fully RoHS compliant.
Unit 1 Lincoln Business Park Lincoln Close,
Rochdale, Lancashire, England OL11 1NR
Tel: (44) (0)1706 654039 Fax: (44) (0)1706 646089
Email: info@testometric.co.uk website: www.testometric.co.uk
Download PDF

advertising