TEKLAB product catalogue 2018 (ID 378702)_docx

Product catalogue 2018
www.kontram.fi/en
Copyright: TEKLAB®
1
Kontram’s TEKLAB group specializes in providing modular and multipurpose electric workstations and
laboratories for education and industry.
TEKLAB solutions are used for example in following areas:
EDUCATIONAL
INDUSTRIAL
Electronics laboratories
Electrical engineering laboratories
Physics laboratories
Calibration laboratories
ICT laboratories
Aviation laboratories
Automotive laboratories
Industrial training centres
Electrical industry
Electronics industry
Process industry
Defence
Pharmaceutical
Marine
Food & beverage
More than 20 000 TEKLAB workstations have been delivered to more than 100 countries during our 35 years of
existence. Thus, our experience provides us leading knowledge of customer requirements in demanding industrial
and educational environments.
TEKLAB is world widely well known as a reliable partner with longlife quality products. We are committed to
support our customers and partners by providing industry-leading expertise with complete service all the way
from product development to turn-key delivery.
All specifications in the catalogue are subject to change without notice.
Copyright: TEKLAB®
2
TABLE OF CONTENTS
Laboratory examples ................................................................................................................................................................................................. 4
Laboratory products ................................................................................................................................................................................................... 6
Workstations ................................................................................................................................................................................................................... 13
Accessories and fittings… ...................................................................................................................................................................................... 21
Supply units..................................................................................................................................................................................................................... 31
Variable DC power supplies ............................................................................................................................................................................... 33
Fixed DC power supplies ......................................................................................................................................................................................36
1 phase AC power supplies.................................................................................................................................................................................. 37
3 phase AC power supplies ................................................................................................................................................................................ 40
1 phase AC connections ....................................................................................................................................................................................... 42
3 phase AC connections ........................................................................................................................................................................................ 43
Connections .................................................................................................................................................................................................................. 44
Multimeters ....................................................................................................................................................................................................................47
LCR meters..................................................................................................................................................................................................................... 50
Function generators ..................................................................................................................................................................................................51
Oscilloscopes ................................................................................................................................................................................................................. 53
Power analyzers ......................................................................................................................................................................................................... 56
RF equipment.............................................................................................................................................................................................................. 58
Calibration equipment ......................................................................................................................................................................................... 59
Test equipment .......................................................................................................................................................................................................... 65
Biomedical test equipment .............................................................................................................................................................................. 68
Soldering equipment ...............................................................................................................................................................................................71
Copyright: TEKLAB®
3
Laboratory examples
MULTIPURPOSE HELP3 LABORATORY
TEKLAB Help3 workstation is based on a unique multipurpose construction, which enables theory lessons and
practical training in one room. Thanks to the compact size, laboratories can also be built into normal classrooms
with limited space.
Help3 workstations are an excellent solution for basic electrical engineering laboratories, physics laboratories as
well as for teaching the basics of electrical systems to ICT and car technicians and engineers.
MULTIPURPOSE WORKSTATION CONCEPT
Help3 workstations have modular build-in electrical instruments
which can be selected according to customer needs. These
instruments can be hidden under sliding table top, which
enables transforming the laboratory workstation into a normal
theory table. The cover can also be locked offering a safe place
for storing the equipment.
Optionally, the workstation cover can be equipped with electric
lock with remote control via TEKLAB TLC laboratory
management software.
Help3 workstation:
theory mode
Help3 workstation:
practice mode
SAFE AND PRACTICAL LABORATORY
All TEKLAB workstations are equipped with electrical protection
systems for safe working.
As instruments and computer connections are integrated into
the workstation, the workspace is practical to use.
Practical design is also aesthetic.
TYPICAL DELIVERY CONTENT
Help3 workstations
Integrated instruments
Integration place for training kits
Racks and connections for computers
Technical furniture (cabinets, drawers,
chairs)
Designing
Installation and training
Copyright: TEKLAB®
4
Laboratory examples
MULTIPURPOSE HELP5 LABORATORY
Help5 motorised multipurpose workstations offer great flexibility for technical laboratories: motorised panels can
be driven up and down to transform a theory classroom into a technical laboratory - and vice versa. Considerable
savings are achieved thanks to the possibility to modify classrooms for different purposes.
TRAINING AREAS
Help5 motorised workstations are the right choice e.g. for electronics and telecommunication training
laboratories. Together with TLC laboratory control software, Help5 workstations convert the laboratory into a
multifunctional room.
INTEGRATED CONSTRUCTION
Help5 workstation is equipped with a modular instrument panel
for electrical instruments such as power supplies and measuring
equipment. Integration releases more space on tabletop providing
an ergonomic workplace.
Help5 workstation includes also an integrated storage space. This
storage space is suitable for storing training sets, learning materials
and accessories. When the panels are driven down and locked, the
equipment is practically stored in a safe place.
The multipurpose concept brings savings in both space and time
because all laboratory equipment and components are always
easily available in the workstation.
Help5 workstation
UNIQUE FUNCTIONALITY
Help5 laboratory can be controlled via TEKLAB TLC software on the teacher’s computers.
Centralized software control converts the laboratory into a theory classroom in just 30 seconds. Besides this, the
teacher can for example:
Control of the students' motorised workstations (UP / DOWN /
LOCK)
Control of the electricity in the students’ workstations (ON /
OFF)
Limit the output voltage and current on power supplies
Supervise and lock students' computers
Students can control the instruments via TEKLAB Client
software. In addition, datalogging features are available for
saving measurement results.
Help5 laboratory in theory teaching mode. All equipment is
safely stored inside the workstations.
Copyright: TEKLAB®
WHY LABORATORY BASED ON HELP5
WORKSTATIONS?
2 in 1 concept: laboratory work and
theory lessons in one room
All instruments and training equipment
available by a press of a button
Suitable for different types of
laboratories:
• Electrical
• Electronics
• Automation etc.
Help5 laboratory in practice mode. All equipment is
practically available.
5
Laboratory products
TLC
TEKLAB Laboratory Control software
TEKLAB Laboratory Control (TLC) software is especially designed for educational laboratories. With TLC software,
teacher is able to supervise and control the whole laboratory easily.
TEKLAB multifunction workstations and devices, together with TEKLAB Laboratory Control software, turn the work
premises into a genuine multipurpose laboratory.
TLC software enables teacher to control workstations and devices from a single computer. Versatile group control
functions with preset values make the software an efficient and convenient tool for the teacher.
There are three versions of the software available, TLCLITE, TLCBASIC and TLCPRO.
TLCLITE controls motorized workstations in the laboratory:
Lifting / lowering motorized panels in Help5 workstations
Workstation locking in Help5 workstations
TLCBASIC includes TLCLITE features adding the following:
Connection permission for electricity
Electricity off -control
Electricity on -status information
Emergency switch -status information
Call button -status information
Centralized safety test for RCDs
TLCPRO includes all features listed above, adding the following:
Group control of student power supplies: settings, limitations and
locking
Group control of student devices: settings, two-way
communication
Real time supervision / locking of student computers
Limitation of internet access / application access of student
computers
Display sharing for whole classroom
TLCBASIC
TLCPRO
Description
TEKLAB Laboratory
Control, lite
TEKLAB Laboratory
Control, basic
TEKLAB Laboratory
Control, large
Copyright: TEKLAB®
Student workstations
Local Area Network (LAN)
Software
TLCLITE
Teacher’s laboratory
control software
6
Laboratory products
TMLC
TEKLAB Mobile Laboratory Control
Unique TEKLAB Mobile Laboratory Control (TMLC) gives teacher a possibility to control a laboratory remotely using
a mobile device such as a tablet or a smart phone.
Teacher can for example open the laboratory for small study groups and supervise students' work via live video
broadcast from the laboratory.
With TMLC the teacher can:
Open the laboratory by unlocking workstations and enabling
electricity
Close the laboratory by switching power off and driving motorised
instruments panel down. Workstations can also be locked.
Receive status information if emergency stop or call button is being
pressed
Apply voltage and current limitations to power supplies (if network
controlled power supplies included)
Supervise laboratory work via web camera
Supervise and control students´ computers (if TLCPRO software
included)
TMLC includes:
TMLC software for a mobile device
Tablet device
Web camera for laboratory
WLAN access point
Code
TMLC
Description
TEKLAB Mobile Laboratory Control
LABORATORY 2, 3….
Teacher’s or school
personnel’s mobile device
running TMLC software
LABORATORY 1
WLAN access
point
S
S
S
S
S
S
S
S
S
Copyright: TEKLAB®
Local Area Network (LAN)
T
Teacher
workstation
Student
workstation
Student
workstation
Student
workstation
Student
workstation
Student
workstation
Student
workstation
Student
workstation
Student
workstation
Student
workstation
7
Laboratory products
TEKLAB Client software
Software for instrument control
TEKLAB Client software including fast two-way communication and
versatile user interfaces enable e.g. automatic measurements
without programming.
TEKLAB Client devices are connected to the local network
(LAN/WLAN), which enables also central device control via TEKLAB
TLC laboratory management software.
The devices come with uniform user interfaces, both in terms of
visual look and operation, including e.g. save functions for set and
measured values. The advanced datalogging function enables e.g.
simultaneous follow-up and saving of several quantities, or saving of
an individual value by the snapshot function. The advanced TCP/IP
based LabVIEW drivers speed up making own applications. Manual
operation is also possible for all devices.
Software
ACPETHERNET
TLPETHERNET
Copyright: TEKLAB®
Description
TCP / IP interface, Client software and
LabVIEW driver for ACP series AC power
supplies
TCP / IP interface, Client software and
LabVIEW driver for TLP series DC power
supplies
8
Laboratory products
LABORATORY TUTORIAL
“Introduction to electric laboratory” – PowerPoint show, duration
approx. 2 hours
The presentation is used to introduce electrical laboratory
environment to new students
The presentation includes following topics:
• Electrical safety
• Electrical protection systems
• ESD
• Electrical laboratory environment
• Electrical workstation description
Model
LABTUTOR
Description
Laboratory tutorial
MEASURING INSTRUMENT TRAINING SET
Tutorials for measuring equipment
• Safe multimeter measurements DVD
• Oscilloscope, probe and function generator tutorials in PDF
format
• Oscilloscope functions poster
Model
LABMEAS
Description
Measuring instrument training
set
COLOUR OPTIONS FOR LABORATORY
Choose your own colour scheme for the laboratory
Colour scheme available for cabinet doors, drawers,
workstation sides & back plates and chairs
Model
LABCOLOUR
Description
Colour scheme for the
laboratory
LOCKING SYSTEM FOR LABORATORY FURNITURE
Laboratory fittings can be equipped with 3-level locking system,
which can be used to limit access from unauthorized persons
Model
LABLOCK
Copyright: TEKLAB®
Description
3-level locking system for
fittings
9
Laboratory products
LABORATORY TOOL PACKAGE
High speed rotary tool, 8 pcs
• No-load speed, 10 000 – 33 000 rpm, 10 speed levels
• Collet lock
• Twist Nose Cap (no wrench required for changing accessories)
• Replaceable brushes
• Soft grip for reduced vibration and a better handling
• 25 pcs accessories
Vice, 8 pcs
• Rubber suction foot
• Can be swivelled 360° with an adjustable tilt angle of up to 90°
Circuit board holder, 8 pcs
• Max. PCB size: 160 x 235 mm
• Can be rotated by 360°; in 15° steps interlockable
• PCB assembly with spring holders
• Turnable arm with clamping pad for keeping the components
in place
• Antistatic construction
Safety goggles, 24 pcs
• Frameless design for distortion free vision
• Cushioned temple pads for superior comfort and grip
• Clear polycarbonate lens for protection against low energy
impact
Model
LABTOOL
Description
Laboratory tool package
MAINTENANCE PACKAGE FOR LABORATORY
Maintenance package for laboratory
The maintenance program is designed to keep the laboratory in
proper condition
Regular tests once a year ensure that the work is done
comfortably and more safely
Maintenance program includes:
• Test reports
• Safety tester
• Safety test leads
• Schuko-plug test cable
• Digital multimeter
Program includes e.g. following tests:
• PE-conductor continuity test
• Conductor insulation resistance tests
• Fault loop / RCD test
• Device tests
Model
LABCHECK
Copyright: TEKLAB®
Description
Laboratory maintenance
program
10
Laboratory products
SAFETY PACKAGE FOR LABORATORY
First aid cabinet
• Cabinet to be fixed to a wall including a variety of first aid
products. All products are easily available and protected
against dust and moisture by transparent lids.
• Blood stoppers
• Protection kit
• Triangular bandages
• Would cleansers
• Plaster dispenser + 85 pcs plasters
• First aid instructions
Model
LABSAFE
Description
Laboratory safety package
ESD PACKAGE FOR LABORATORY
ESD test station, 1 pc
• ESD wrist strap and shoe tester
• Instructions on the panel
• Wall fastening set
ESD jackets, 20 pcs
• Unisex model
• Semiconductive material
• Washable without losing conductive properties
ESD covers for shoes, 100 pairs
• ESD shields with conducting tape for shoes
Model
LABESD
Description
Laboratory ESD package
TOOL SET FOR INSTALLING WORKBENCH
Professional tool set for workbench installation
10 parts
Tools included:
• Long arm hex key, 5.0 mm
• Long arm hex key, 3/32 inch
• Long arm Torx key, T10
• Long arm Torx key, T20
• Long arm Torx key, T25
• Long arm Torx key, T30
• Screwdriver, PZ3
• Screwdriver, PZ2
• 13 mm combination spanner, 180 mm
• 19 mm combination spanner, 250 mm
• Tool roll for tools, 390x320 mm
Model
INSTOOLSET
Copyright: TEKLAB®
Description
Tool set for installing
workbench
11
Laboratory products
ESD PROTECTION EQUIPMENT
Electrostatic discharges cause frequently disturbances in electronic devices. Sensitive components can be
destroyed immediately or the fault might come out later.
TEKLAB offers ESD-protection systems for laboratories and workshops, which help to avoid ESD-based problems.
Model
ESDSET1
ESDMAT1
Copyright: TEKLAB®
Description
ESD grounding set for workstation:
ESD connection box, workstation
frame ESD grounding set, ESD wrist
strap grounding set, 2 pcs ESD wrist
straps
ESD floor mat, 2000 x 1250 mm,
ESD connection wire
12
Workstations
Basic workstation
TABBL, EP15
Basic workstations are an economic solution for applications where only entry level instruments are needed. The
energy panel is modular and it can be equipped with electrical supply systems, compressed air outlets and data
connections.
Workstation frame
• ESD-painted steel frame
• Four steel tube legs
• Two spacer bars between legs for stable
construction
• Table top with laminate surface, durable rounded
plastic edges, colour light speckled grey
• The core of the optional ESD-table top, as well as
the laminate of the coating are semi-conductive
• The frame can be equipped with uprights for
placing accessories
• Versatile and adjustable accessories facilitate
ergonomic component storage and selection
Workstation
frames,
standard table top
TABBL12
TABBL15
TABBL18
Workstation
frames,
ESD table top
ETABBL12
ETABBL15
ETABBL18
Module
EP15SU1
EP15SU1E
EP15SU3
EP15SU3E
EP15PO2
EP15POA
EP15SCHUKO4
EP15BS1363
EP15CEE3
EP15PS3
EP15ETH
EP15USB2
EP15DCA305PS
EP15DCF242
EP15DCF123
EP15DCF3355
Description
1-phase supply unit
1-phase basic supply unit
3-phase supply unit
3-phase basic supply unit
Compressed air connection, 10 bar, 2 outputs
Adjustable compressed air output, 0.5-10 bar, gauge
1-phase schuko socket outlets, 4 pcs
1-phase UK socket outlets, 4 pcs
3-phase socket, CEE, 16 A
3-phase 4 mm safety terminal output
Ethernet connection, RJ45
USB connection, 2 pcs
Adjustable DC power supply, 0-30 V, 0-5 A
Fixed DC power supply, 24 V, 2 A
Fixed DC power supply, 12 V, 3 A
Fixed DC power supply, 3.3 V, 5 A + 5 V, 5 A
Copyright: TEKLAB®
Table top size,
W x D (mm)
• Stepless height adjustment: 650-900 mm
• Load capacity 300 kg, evenly loaded
Device panel
• Device panel for integrated electrical instruments
• Structure of the panel made of ESD-painted steel
• Compact design, depth and height only 150 mm
• Panel equipped with modular device system:
Devices can be easily added
• Device panel is slanted to offer best usability
• Installed on table top - compatible with all
workstation models
1200 x700
1500 x 700
1800 x 700
Panels
EP15L12
EP15L15
EP15L18
Panel dimensions, W x D x H
(mm)
1200 x 150 x 150
1500 x 150 x 150
1800 x 150 x 150
Width, mm
300
100
400
200
100
200
200
200
100
200
100
100
300
200
200
200
13
Workstations
Multipurpose workstation
HELP3
TEKLAB Help3 workstation is based on a unique multipurpose construction, which enables theory lessons and
practical training in one room.
Help3 workstations are an excellent solution for basic electrical engineering laboratories, physics laboratories as
well as for teaching the basics of electrical systems to ICT and car technicians and engineers.
Help3 multifunction workstation is a cost-effective solution for training laboratories. Thanks to the compact size,
the laboratory can be built into rooms with limited space.
Multipurpose construction: electric workstation and
theory desk in one solution
Built-in instrument panel for integrated electrical
instruments, instrument panel located under a sliding
table top
Sliding table top movable forwards and backwards to
enable / hide the instrument panel
Sliding table top can be locked to prevent access to
the instrument panel
Modular instrument panel:
• Devices can be added afterwards
• Instrument panel is slanted to achieve best
possible usability
• Integrated modules are covered with polyester
film to ensure long lifetime for the markings in the
front panel
Workstation frames
HELP3L12
HELP3L15
HELP3L17
Table top size, W x D (mm)
1210 x 580-810
1460 x 580-810
1710 x 580-810
Workstation frame and instrument panel made of
ESD powder painted steel
L-shaped ergonomic legs for more space under
workstation
Adjustable height 710-780 mm
Adjustment screws under the workstation to
eliminate the roughness of the floor
Table top with laminate coating, durable plastic
edges, colour light grey
4 pcs sockets in the energy channel located at the
rear part of the workstations. Sockets are available
also when the table top is in closed position.
Can be equipped with upright tubes for fixing
accessories such as shelves, display holders or frames
for training panels
Full modules max.
4½
5½
6½
Options for Help3 workstations
LOCK3M
Manual lock for cover
LOCK3NET
LAN-controlled electric lock for cover, power on/off control
WKS820717
Mini cabinet under the table top, lockable, dimensions:
255(W) x 330(D) x 189(H) mm
HELP3SOCKEU
4 pcs schuko sockets under the workstation
HELP3SOCKUK
4 pcs UK sockets under the workstation
HELP3SOCKUS
4 pcs US sockets under the workstation
Copyright: TEKLAB®
14
Workstations
Multipurpose workstation
HELP5
Help5: device panel
available
Help5: flat work surface
Help5: device panel + storage space available
Help5 motorised workstation is the right choice e.g. for electronics and telecommunication training laboratories.
Considerable savings are achieved thanks to the possibility to modify classrooms for different purposes. Valuable
storing space is also saved when laboratory equipment, components and training kits are available in the
integrated storage unit.
Together with TLC laboratory control software, Help5 workstations convert the laboratory into a multifunctional
room.
Multipurpose construction: electric workstation and
theory desk in one solution
Construction includes a fixed table section (1806 /
2000 x 620 mm) in the front and a motorized panel
section (1806 / 2000 x 470 mm) in the rear
Motorized panel section includes a built-in device
panel for integrated electrical equipment and a
storage unit below it
• Device panel is modular: devices can be added
later on. Integrated modules are covered with
polyester film to ensure long lifetime for the
markings in the front panel
• Storage space is suitable for storing training kits,
motors, soldering equipment etc. Storing space is
equipped with sockets and Ethernet connection.
Storage space dimensions, HELP5L20: 1780(W) x
420(D) x 268(H) mm, HELP5L18: 1586(W) x 420(D) x
268(H) mm
Motorized panel equipped with fast, silent and
service free electric motors for moving panel up /
down
Workstation frames, standard
table top
HELP5L18
HELP5L20
Options for Help5 workstations
HELP5PC1
HELP5PC2
Copyright: TEKLAB®
Motorized panel can be used in three positions: down
(flat work surface), middle (device panel available), up
(device panel + storage space available)
While panel is down, devices and equipment are safe
from unauthorized use
Panel can be driven either using a manual controller,
or using laboratory control software
Safety switch between the motorised panel and
workstation frame for finger protection
Workstation body made of ESD painted steel
L-shaped ergonomic legs in the front
Table tops with laminate surface, durable rounded
plastic edges, colour light speckled grey
The core of the optional ESD table top, as well as the
laminate of the coating are semi-conductive
Load capacity for workstation: 250 kg
Adjustment screws to eliminate the roughness of the
floor
Integrated connections: USB, 2 x Ethernet, 4 x socket
Can be connected to LAN and used with TLC
software
Workstation frames, ESD table
top
EHELP5L18
EHELP5L20
Table top size, W x D (mm)
Full modules, max.
1806 x 1090
2000 x 1090
6¾
7¾
Integrated cable series for a desktop computer: Includes: opening on the panel top,
HDMI signal cable, socket for powering a display
Integrated cable series for 2 desktop computers: Includes: 2 pcs openings on the panel
top, 2 pcs HDMI signal cables, 2 pcs sockets for powering displays
15
Workstations
TowerLine workstation
TABTL, PANTL
TowerLine workstation offers great flexibility for workshops and laboratories thanks to its modular construction.
Tall legs include perforated tubes that enable placing accessories to different heights. By this, the workstation can
be adjusted to meet customer specific needs. For example, when plenty of devices are used, it is possible to place
two instruments panels on top of each other.
TowerLine workstations can be attached to each other using only one leg in the middle. This enables creating
practical and aesthetic working environments.
Workstation frame
• ESD-painted steel frame
• L-shaped ergonomic legs, height 1920 mm
• Legs equipped with perforated uprights for
placing accessories to different heights
• Versatile and adjustable accessories enable
ergonomic and practical working environment
• Vertical cable channels inside legs
• Horizontal cable channel below the table top at
rear part
• Spacer bar between legs for stable construction
• Load capacity: 300 kg, evenly loaded
• Adjustment screws to eliminate the roughness of
the floor
• Table top with laminate surface, durable rounded
plastic edges, colour light speckled grey
• The core of the optional ESD-table top, as well as
the laminate of the coating are semi-conductive
Workstation frames, standard table top
TABTL16
TABTL16X
TABTL19
TABTL19X
TABTLC
X = extension frame (one leg only)
Panels
PANTL16
PANTL19
PANTLC
Full modules max.
6
7¼
4
Options for TL workstations
PANSOCKETLEU
PANSOCKETLUK
PANSOCKETLUS
Copyright: TEKLAB®
Device panel
• Panel for integrated electrical equipment
• Structure of the panel made of ESD powder
painted steel
• Panel equipped with modular device system:
devices can be easily added and removed
• Integrated modules are covered with polyester
film to ensure long lifetime for the markings in the
front panel
• Energy saving LED lighting integrated at the
bottom of the panel
• Panel top can be opened
• Height from the table top can be freely chosen
• All connectors are located at the bottom of the
panel, which enables placing the panel against a
wall
Workstation frames, ESD table top
ETABTL16
ETABTL16X
ETABTL19
ETABTL19X
ETABTLC
Table top size, W x D (mm)
1575 x 750
1575 x 750
1880 x 750
1880 x 750
CORNER MODEL
Panel width (mm)
1550
1880
CORNER MODEL
Description
2 x 2 pcs schuko sockets under device panel
2 x 2 pcs UK sockets under device panel
2 x 2 pcs US sockets under device panel
16
Workstations
Concept workstation
TABSYSL, PANSYSL
Concept workstation is a good solution for rooms where it is preferred to have a direct view forward, or to allow
natural light to enter the space. The top of the panel can be used as a practical plane surface.
Workstation frame
• ESD powder painted steel frame
• L-shaped ergonomic legs
• Table top with laminate surface, durable
rounded plastic edges, colour light speckled
grey
• Core of the ESD-table top, as well as the
laminate of the coating are semi-conductive
• Adjustable height: 670 – 1120 mm
• Adjustment screws to eliminate the roughness
of the floor
• Load capacity 500 kg, evenly loaded
Workstation frames, standard table top
TABSYSL15
TABSYSL18
TABSYSL20
Panels
PANSYSL15
PANSYSL18
PANSYSL20
Copyright: TEKLAB®
Full modules max.
5¾
7
7¾
Device panel
• Panel for integrated electrical equipment
• Installed on the table top
• Structure of the panel made of ESD powder
painted steel
• Panel equipped with modular device system:
devices can be easily added and removed
• Integrated modules are covered with polyester
film to ensure long lifetime for the markings in
the front panel
• Panel top can be opened
• All connectors are located at the bottom of the
panel which enables placing the panel against
a wall
Workstation frames, ESD table top
ETABSYSL15
ETABSYSL18
ETABSYSL20
Table top size, W x D (mm)
1500 x 900
1800 x 900
2000 x 900
Panel length (mm)
1500
1805
2000
17
Workstations
Heavy duty workstation
TABHEAVYH, PANSYSH
This model is designed to withstand heavy-duty use. It is equipped with an extra thick table top and a strong steel
frame. Also this model can be customized with a wide range of accessories.
Workstation frame
• ESD powder painted steel frame
• Four legs
• Three spacer bars / supports between legs for
stable construction
• Frame includes uprights for the device panel
and perforated 500 mm backplates between
the uprights
• Accessories above the table top are attached to
perforated uprights and can be positioned to
suit individual needs
• Versatile and adjustable accessories facilitate
ergonomic component storage and selection
• The tabletop has a core of plywood and
chipboard, laminate surface and plastic edges,
thickness 50 mm
• Adjustable height: 750-1000 mm
• Table can be fastened to floor
• Load capacity 500 kg, evenly loaded
Workstation frames, standard table top
TABHEAVYH155
TABHEAVYH205
Panels
PANSYSH15
PANSYSH20
Copyright: TEKLAB®
Full modules max.
5¾
7¾
Device panel
• Panel for integrated electrical equipment
• Structure of the panel made of ESD powder
painted steel
• Panel equipped with modular device system:
Devices can be easily added and removed
• Integrated modules are covered with polyester
film to ensure long lifetime for the markings in
the front panel
• Energy saving LED lighting integrated at the
bottom of the panel
• Panel top can be opened
• Height from the table top can be chosen
between 370, 425 or 480 mm
Table top size, W x D (mm)
1530 x 750
2030 x 750
Panel length (mm)
1530
2030
18
Workstations
Electrically / manually adjustable Concept workstation
TABSYSHE/M, PANSYSH
An easy way to adapt one workstation for several users is to have it equipped with electrical height adjustment. At
the same time, electrical height adjustment enables the workstation to be suitable for standing work –
ergonomics at its best.
Workstation frame
• ESD powder painted steel frame
• L-shaped ergonomic legs
• Spacer bar between legs for stable construction
• Table top with laminate surface, durable
rounded plastic edges, colour light speckled
grey
• The core of the ESD-table top, as well as the
laminate of the coating are semi-conductive
• Electrically / manually adjustable height: 700 –
1100 mm
• Frame includes uprights for the device panel
and perforated 500 mm backplates between
the uprights
• Accessories are attached to perforated uprights
and can be positioned to suit individual needs
• Versatile and adjustable accessories facilitate
ergonomic component storage and selection
• Adjustment screws to eliminate the roughness
of the floor
• Load capacity 200 kg, evenly loaded
Device panel
• Panel for integrated electrical equipment
• Structure of the panel made of ESD powder
painted steel
• Panel equipped with modular device system:
Devices can be easily added and removed
• Integrated modules are covered with polyester
film to ensure long lifetime for the markings in
the front panel
• Energy saving LED lighting integrated at the
bottom of the panel
• Panel top can be opened
• Height from the table top can be chosen
between 370, 425 or 480 mm
Workstation frames, standard table top
Workstation frames, ESD table top
TABSYSH155E
ETABSYSH155E
TABSYSH155M
ETABSYSH155M
TABSYSH185E
ETABSYSH185E
TABSYSH185M
ETABSYSH185M
E = Electrical height adjustment, M = Manual height adjustment
Panels
PANSYSH15
PANSYSH18
Copyright: TEKLAB®
Full modules max.
5¾
7
Table top size, W x D (mm)
1530 x 900
1530 x 900
1830 x 900
1830 x 900
Panel length (mm)
1530
1830
19
Workstations
Trolleys
MOBILELAB
MOBILELAB4
MOBILELAB2
Trolleys offer great mobility for a large number of integrated devices. Trolleys can be equipped with stands and
cabinets for creating a practical mobile workplace
ESD powder painted steel construction
4 wheels, diameter 80 mm, two with brakes
Handle for easy moving of the trolley
Built-in device panel for integrated electrical equipment
Device panel is modular: devices can be easily added and removed
Integrated modules are covered with polyester film to ensure long lifetime for the markings in the front panel
MOBILELAB4 model includes 4 levels for devices, max 10 ½ full modules
MOBILELAB2 model includes 2 levels for devices, max 5 ½ full modules
2 pcs sockets at the back
Perforated upright tubes for fastening accessories to different heights
Versatile and adjustable accessories enable ergonomic and practical working environment
MOBILELAB2 includes bottom shelf
Rubber mat on top of the surface
Dimensions: 780(W) x 720(D) x 1630(H) mm
Models
MOBILELAB4
MOBILELAB2
Description
Electric trolley, 4 levels
Electric trolley, 2 levels
Options
MOBILELABSUK
MOBILELABSUS
MOBILELABBH
Description
2 pcs UK sockets
2 pcs US sockets
Holder for compressed air
bottle
Soft rubber wheel set
MOBILELABSRW
Copyright: TEKLAB®
20
Accessories and fittings
ACCESSORIES
TEKLAB workstations can be equipped with versatile accessories to make the workplace more practical. Different
kinds of auxiliary tops give new possibilities to combine loose instruments, tools and e.g. circuit diagrams and
drawings to the workstations ergonomically. Accessories are attached to the perforated uprights of the
workstation.
The standard colour of the workstations and fittings is light grey – RAL7035. However, there are many optional
colours available.
PC RACKS
In TEKLAB workstations desktop
computers can be placed under the
table top saving workspace
The PC racks are lockable, lock not
included (except WHV861120)
ESD powder painted steel
construction
Check the table for compatibility (X =
available)
Model
Description
CPULUKIT
PC rack,
keyboard
stand
PC rack
CPULUKIT3
CPULUKIT5
CPUVTLUKITT
WTL820303
WHV860552
WHV860740
WHV861120
Copyright: TEKLAB®
PC rack,
keyboard
stand
PC rack,
extendable
shelf
PC holder
PC shelf, foot
attachment
PC shelf, foot
attachment
PC cabinet,
extendable
shelf
CPULUKIT,
CPULUKIT5
Max size of PC
W x D x H, mm
230 x 430 x 430
HELP5
workstation
200 x 400 x
380
230 x 430 x 430
X
230 x 430 x 430
X
>150 x 500 x 85
100-240 x 450
x 430
100-240 x 450
x 430
325 x 550 x 560
CPULUKIT3
WTL820303
HELP3
workstation
WHV860552,
WHV860740
WHV861120
Concept
workstation
X
Heavy duty
workstation
X
TowerLine
workstation
X
X
X
X
X
X
X
X
X
X
X
X
X
X
21
Accessories and fittings
DISPLAY HOLDERS
Fixing a display to a separate holder gives more workspace on the
table top
Adjustable display holder improves work ergonomics
Models
WSA93035002
Description
Display holder
Display holder for TL
workstation
Display holder with keyboard
and mouse stand
Display holder with keyboard
and mouse stand for TL
workstation
Display holder to be
attached to horizontal
surface
WTL93035002
WSA93035003
WTL93035003
LCDKANL
WSA93035002
WSA93035003
LCDKANL
KEYBOARD TRAY
Keyboard tray is fastened under the table top
Model
WHV92535001
Size, W x D, mm
630 x 400
Max load, kg
10
DRAWER UNITS 45
Select from two models: drawer trolley or drawer to be fixed
under the table top
Drawers equipped with ball-rails and central locking, load
capacity 30 kg / drawer
Drawers open 75 %, also 100 % models are available
In trolley model four swivel wheels, two with brakes, diameter 100
mm
ESD-painted steel frame, trolley model equipped with ESD-mat
and wheels
Standard colour light grey – RAL7035, optional colours available
for drawer fronts, see page 19
Dimensions: 450(W) x 520(D) x 560(H) mm
Drawer to be fixed
under table top
WKL60635001
WKL60635002
WKL60635003
WKL60635004
WKL60635007
Copyright: TEKLAB®
Trolley model
Drawers
WEV60635021
WEV60635022
WEV60635023
WEV60635024
WEV60635027
5 x 100 mm
2 x 100 mm, 2 x 150 mm
3 x 100 mm, 1 x 200 mm
1 x 100 mm, 2 x 200 mm
2 x 150 mm, 1 x 200 mm
WKL60635001
WEV60635023
22
Accessories and fittings
DRAWER UNITS 30
ESD-painted steel frame
To be fixed under table top. Drawer units can also be fixed one
below other
Small drawers for tools etc.
Drawers equipped with a lock
Drawer opening 80%
Internal drawer dimensions: 253(W) x 429(D) x 130(H) mm
Model
Size, W x D x H, mm
WKS859330
WKS859340
WKS860972
WKS860918
300 x 454 x 150, 1 drawer
300 x 454 x 222, 2 drawers
350 x 450 x 470, cabinet
350 x 450 x 555, cabinet,
wheels
Max load,
kg
10
20
25
25
WKS859330
WKS860918
UPRIGHT TUBES
Perforated upright tubes for fastening accessories to workstations
Made of ESD painted steel, 30(W) x 60(D) mm
Removable
Model
WPE860024
WPE860142
Height
1359 mm
800 mm
SHELVES
Structure made of ESD painted steel
Model
WHT860804
WHT860805
WTL854480
WTL854481
WTL854484
WTL854482
WTL854485
WTL820471
WTL854479
Size, W x D, mm
490 x 300
490 x 400
1167 x 300
1467 x 300
1467 x 400
1773 x 300
1773 x 400
600 x 200, fixed to perforated
back panel
CORNER MODEL FOR TL
WORKSTATION
Max load kg
50
50
80
80
80
80
80
7
80
PERFORATED BACK PANELS
Structure made of ESD painted steel
Can be used to attach accessories such as hooks or suspension rails
Standard colour, RAL7035, optional colours available
Model
WPT861501
WPT861511
WPT861516
WTL861526
WTL861531
WTL890411
Copyright: TEKLAB®
Dimensions (W) x (H)
468 x 389 mm
718 x 389 mm
871 x 389 mm
1474 x 389 mm
1774 x 389 mm
CORNER MODEL FOR TL WORKSTATION
23
Accessories and fittings
SUSPENSION RAILS AND PICK-UP BOXES
Structure made of ESD painted steel
Model
WHL859150
WTL859154
WTL859155
WTL839086
WEL806207
Description
Suspension rail, 492(W) x 100(H) mm
Suspension rail, 1493(W) x 100(H) mm
Suspension rail, 1799(W) x 100(H) mm
Suspension rail, 634(W) mm, fixed to
perforated back panel
Pick-up box, 105(W) x 165(D) x 75(H)
mm
Max load
50 kg
50 kg
50 kg
10 kg
2 kg
TRAINING PANEL FRAMES
Frame for A4 training panels
Easily fastening and removing of panels
Model
A4FRAME12(D)
Description
Training panel frame, width 1200 mm, one
row
A4FRAME15(D)
Training panel frame, width 1500 mm, one
row
A4FRAME18(D)
Training panel frame, width 1800 mm, one
row
* D model includes two rows
LIGHT / BALANCER RAILS, LIGHT
Rails
• Rail can be used to attach light ergonomically above the
workstation
• Structure made of ESD-painted steel
• Height and depth adjustment
Light
• Fluorescent tube light, 28 W (WSK861928), 54 W (WSK861954)
or 2 x 54 W (WSKOL254, WSKOL254GB)
• Illuminance: 750 lux (WSK861928), 1350 lux (WSK861954) or
1200 lx (WSKOL254, WSKOL254GB) 1 meter
• Dimmer with stepless adjustment (WSK861954)
• Prism diffuser for illuminating work surface evenly
• Width: 1230 mm, 1200 mm (WSKOL254, WSKOL254UK)
LED light
• Excellent energy efficiency
• Long lifetime upto 50 000 hours
• Illuminance: 1800 lux, 1 meter
• Natural white colour, colour temperature 4000 K
• Dimmer 10-100 %
Model
WSK91835006
WSK91835008
WSK861928
WSK861928
WSK861956
WSK861956
WSKOL254
WSKOL254GB
Copyright: TEKLAB®
Description
Light / balancer rail, width 1500 mm
Light / balancer rail, width 1800 mm
Light, fluorescent tube, 28 W
Light, fluorescent tube, 28 W, UK plug adapter
Light, LED
Light, LED, UK plug
Light, fluorescent tube, 2 x 54 W
Light, fluorescent tube, 2 x 54 W, UK plug
24
Accessories and fittings
CABLE TROUGHS
Horizontal cable trough efficiently hides cables without
preventing maintenance access
Structure made of ESD painted steel
Model
WTL854556
WTL854557
Description
Cable trough, 1487(W) x 97(D) x 45(H)
mm
Cable trough, 1793(W) x 97(D) x 45(H)
mm
DOCUMENT HOLDER
Documents and drawings can be easily placed on the document
holder with two magnets included
Structure made of ESD painted steel
Model
WSI92835008
WTL92835008
Size, W x D, mm
Max load, kg
290 x 330
5
Document holder for TL workstation
TOOL PANEL
Perforated tool panel, includes 6 pcs hooks
Structure made of ESD painted steel
Model
WST92835010
WTL92835010
Size, W x D, mm
Max load, kg
267 x 305
5
Tool panel for TL workstation
AUXILIARY TOP
Can be rotated 360º, tilt adjustment 0-25º
Structure made of ESD painted steel
Models
WSA92735001
WTL92735001
WSA92735002
WTL92735002
Copyright: TEKLAB®
Size, W x D, mm
Max load, kg
560 x 340
15
560 x 340 mm aux. top for TL
workstation
605 x 405
15
605 x 405 mm aux. top for TL
workstation
25
Accessories and fittings
HOOK SETS
Hook sets can be fastened to perforated plates
Models
WHR855001
WHR855003
Description
Series 1, 20 pcs hooks
Series 3, 69 pcs hooks
FOOT REST
Freestanding model
Tilt adjustment 5-30 º
Model
WTT860947
Dimensions
550 x 350 mm
INSTRUMENT SUPPORT
Support for different types of process instruments (pressure
transmitters, switches etc.)
Properly fastened instrument makes calibration and repair work
easier
Includes a plate and a tube bracket to be compatible with
standard size devices
Model
INSTRSU
Size, W x D x H, mm
240 x 260 x 318
ROTATING BASE
Body made of stainless steel
Rubber work surface, blue
Steel bearing
ESD-protected
Locking screw for disabling rotation
Diameter 475 mm
Height 14 mm
Load capacity 100 kg
Model
WEP847145
Copyright: TEKLAB®
Description
Rotating base
26
Accessories and fittings
WHEELS FOR WORKSTATIONS
Diameter of wheels 100 mm, two wheels with brakes
Model
WPP834734
WEP860429
Description
Standard
ESD
TRANSPORT SKATES FOR WORKSTATIONS
With transport skates, one person can easily move the workstation
Model
TRSK
Copyright: TEKLAB®
Description
1 pair transport skates
27
Accessories and fittings
CABINETS
Cabinets bring tidiness, order and efficiency to the work environment
Cabinets are made of ESD-painted steel
Available are practical accessories such as extendable shelves and drawers with ball-race rails, steel shelves,
perforated plates for doors and side walls etc.
Model
Description
TKCABIN1
Tool cabinet, two shelves,
perforated panels, hook series
60 pcs
Tool set to be attached to
TKCABIN1 cabinet, 60 tools
General purpose cabinet, two
shelves
Training kit cabinet, acrylic
glass doors, four shelves
Perforated tool cabinet
Perforated tool cabinet
Shelf for the perforated
cabinet
TKSARJA5
TKCABIN2
TKCABIN5
WVK821465
WRL820800
WRL836273
TKCABIN1 + TKSARJA5
TKCABIN5
Copyright: TEKLAB®
Dimensions,
W x D x H, mm
1024 x 500 x 2000
800 x 400 x 1000
1024 x 500 x 2000
720 x 255 x 300
720 x 255 x 400
715 x 175 x 15
TKCABIN2
WVK821465, WRL820800
28
Accessories and fittings
CHAIRS
Standard models
C15PU
Standard
models
C15PU
C20PU
C25PU
C40BL
SADDLEL
C20PU
C25PU
C40BL
SADDLEL
Description
Stool, black, polyurethane, height adjustment, castors with load-sensitive brakes.
Chair, black, polyurethane, height/backrest/tilt adjustment, castors with load-sensitive brakes
Chair, black, polyurethane, height/backrest/tilt adjustment, castors with load-sensitive brakes, high
version, foot ring, glides
Chair, black, fabric, height/backrest/tilt/depth adjustment, castors with load-sensitive brakes
Saddle chair, black, leather, height/tilt adjustment, castors with load-sensitive brakes.
ESD models
C20PU-ESD
ESD models
C20PU-ESD
C25PU-ESD
C40BL-ESD
C25PU-ESD
C40BL-ESD
Description
ESD chair, black, polyurethane, height/backrest/tilt adjustment, castors with load-sensitive brakes
ESD chair, black, polyurethane, height/backrest/tilt adjustment, castors with load-sensitive brakes,
high version, foot ring, glides
ESD chair, black, fabric, height/backrest/tilt/depth adjustment, castors with load-sensitive brakes
Options
Options
ARE
ARE-ESD
CRING
Copyright: TEKLAB®
Description
3D armrests for Cxxxx chairs, adjustment of height and width with possibility to swivel
4D ESD armrests for Cxxxx-ESD chairs, adjustment of height, width and depth with possibility to
swivel.
Chrome-plated foot ring. Foot ring can also be retrofitted to our lower chair models by attaching it to
the chair column. Can be used on both ESD and non-ESD models. The height can be easily
adjusted without any tools.
29
Accessories and fittings
WORKSTOP TROLLEY
All wheels, diameter 100 mm, with swivel, two with brakes
Includes a lower surface
Height adjustable between 650 - 900 mm
Loading capacity: 150 kg
Model
WESSAP507
WESSAP507ESD
Dimensions, W x D x H, mm
700 x 500 x 650-900
700 x 500 x 650-900, ESD
ERGO TROLLEY
All wheels, diameter 100 mm, with swivel, two with brakes
ESD-protected
Height adjustable between 650 - 900 mm
Loading capacity: 150 kg
Model
WES860422
Dimensions, W x D x H, mm
750 x 500 x 650-900
MULTI TROLLEYS
An ergonomic mobile workstation
Can be equipped with additional tops, shelves etc.
ESD-protected
Four swivel wheels, two with brakes
Max load: 300 kg
Ask for a separate catalogue for more information
Model
WES72135001
WES72135002
WES72135003
WES72235001
WES72235002
WES72235003
Description
Multi trolley 1
Multi trolley 1
Multi trolley 1
Multi trolley 2
Multi trolley 2
Multi trolley 2
Size, W x D x H, mm
530 x 715 x 1130
780 x 715 x 1130
935 x 715 x 1130
530 x 715 x 1630
780 x 715 x 1630
935 x 715 x 1630
Multitrolley 1
Multitrolley 2
TEST LEAD SETS
Safety test leads are recommended to be used in laboratories
Leads with insulated construction, 4 mm safety connectors
Model
JTESTROLLER
JTESTSET1
Description
Test lead rack with wheels,
120 pcs safety test leads
10 pcs safety test leads
JTESTROLLER
Copyright: TEKLAB®
30
Supply units
SU1
1 phase supply unit
Main switch for the workstation with START-position
Green indicator light
Integrated emergency switch, reset from the main switch
Automatic restart prevention system e.g. after power failure
16 A thermal overload protector
Fault current protection 0.03 A for all devices connected to the
supply unit
Earth terminal screw
Outlets for the device modules
Dimensions: ½-module, 125(W) x 200(H) mm
SU3
3 phase supply unit
Main switch for the workstation with START-position
Green indicators
Integrated emergency switch, reset from the operating switch
Automatic restart prevention system e.g. after power failure
Protection circuit for missing phase / wrong phase order
16A thermal overload protector for each phase
Fault current protection 0.03 A for all devices connected to the
supply unit
Earth terminal screw
Connector for 3-phase (3L+N+PE) device module
Outlets for the device modules
Dimensions: ½-module, 125(W) x 200(H) mm
SU332
3 phase supply unit
Main switch for the workstation
Green indicator light
Emergency switch
Automatic restart prevention system eg. after power failure
Protection circuit for missing phase/wrong phase order
32 A and 16 A circuit breakers
Fault current protection 0.03 A for all devices
3-phase 32 A socket at the front panel
Earth terminal screw
Outlets for the device modules in the workstation
Dimensions: 1 ½-module, 375(W) x 200(H) mm
Copyright: TEKLAB®
31
Supply units
SU363
3 phase supply unit
Main switch for the workstation
Green indicator light
Emergency switch
Automatic restart prevention system e.g. after power failure
Protection circuit for missing phase/wrong phase order
63 A and 16 A circuit breakers
3-phase 63 A socket at the front panel
Outlets for the device modules in the workstation
Dimensions: 1 ½-module, 375(W) x 200(H) mm
Copyright: TEKLAB®
32
Variable DC power supplies
TLP305COM, TLP603COM
Programmable DC power supply
Output values:
• TLP305COM
TLP305COM:
COM 0 - 30 V: 0 - 5 A
• TLP603COM
TLP603 COM:
COM 0 - 30 V: 0 - 5 A, 30 - 60 V: 0 - 3 A
Ripple: < 8 mVPP
Output ON/OFF-button
Current limit and voltage settings showed on the display
MAX and MIN display (current and voltage)
Output voltage adjustment accuracy: 0.01 V
Current limitation adjustment accuracy: 0.001 A
Voltage measurement accuracy: ± 0.03 V
Current measurement accuracy: ± 0.006 A
Short-circuit protected
Self-test
Test for leads / mΩ -measuring
Voltage compensation when using long leads
Standard languages: Finnish, English, Swedish
Graphic backlit LCD-display
Adjustable LCD-contrast
Firmware-update possibility
Output from 4 mm safety terminals
Ethernet connection and control program
• Fast two-way communication
• Versatile user interface enables e.g. automatic measurements without programming
• Advanced datalogging function enables e.g. simultaneous follow-up and saving of several quantities, or
saving of an individual value by the snapshot function
LabView-driver: Advanced TCP/IP based LabVIEW driver speeds up making own applications
Dimensions: ½-module, 125(W) x 200(H) mm
TLP305DCOM, TLP603DCOM
Programmable dual DC power supply
Output values:
• TLP305DCOM
TLP305DCOM:
COM 2 x 0 - 30 V: 0 - 5 A
• TLP603DCOM
TLP603DCOM:
COM 2 x 0 - 30 V: 0 - 5 A, 30 - 60 V: 0 - 3 A
Ripple: < 8 mVPP
Output ON/OFF-button
Current limit and voltage settings showed on the display
MAX and MIN display (current and voltage)
Output voltage adjustment accuracy: 0.01 V
Current limitation adjustment accuracy: 0.001 A
Voltage measurement accuracy: ± 0.03 V
Current measurement accuracy: ± 0.006 A
Short-circuit protected
Self-test
Test for leads / mΩ -measuring
Voltage compensation when using long leads
Standard languages: Finnish, English, Swedish
Graphic backlit LCD-display
Adjustable LCD contrast
Tracking mode
Firmware-update possibility
Output from 4 mm safety terminals
Ethernet connection and control program
• Fast two-way communication
• Versatile user interface enables e.g. automatic measurements without programming
• Advanced datalogging function enables e.g. simultaneous follow-up and saving of several quantities, or
saving of an individual value by the snapshot function
LabView-driver: Advanced TCP/IP based LabVIEW driver speeds up making own applications
Dimensions: Full-module, 250(W) x 200(H) mm
Copyright: TEKLAB®
33
Variable DC power supplies
DCAEL302R
Variable DC power supply
Output values: 0-30 V, 0-2 A, 60 W
Linear regulation
Constant voltage or constant current operation
Voltage Setting: By coarse and fine controls
Current Setting: By single logarithmic control
Independent digital voltage and current meters for each output
with 4 digit resolution
Voltage meter:
• Resolution: 10 mV
• Accuracy: 0.3 % of reading ± 3 digits
Current Meter:
• Resolution: 1 mA
• Accuracy: 0.5 % of reading ± 3 digits
Ripple & noise: Typically < 1 mV rms (CV mode, 20 mHz bandwidth)
Switchable local or remote sensing
Silent fan-free cooling
DC output on/off switch
All outputs are intrinsically short circuit proof, and are protected
against external voltages and reverse currents
Output terminals: Universal 4mm safety binding posts on 19mm
(0.75”) spacing. Terminals can accept fixed shroud 4 mm plugs,
standard 4 mm plugs, fork terminals and bare wires
Dimensions: ¾ module, 187,5(W) x 200(H) mm
Option:
• TTICAL Calibration certificate with results
DCAEL302RD
Variable DC power supply
Output values: 2 x 0-30 V, 0-2 A, total power 120 W
The two outputs are independent and isolated
The outputs can be wired in either series or parallel to provide
voltages up to 60 volts or currents up to 4 amps
Linear regulation
Constant voltage or constant current operation
Voltage Setting: By coarse and fine controls
Current Setting: By single logarithmic control
Independent digital voltage and current meters for each output
with 4 digit resolution
Voltage meter:
• Resolution: 10 mV
• Accuracy: 0.3 % of reading ± 3 digits
Current Meter:
• Resolution: 1 mA
• Accuracy: 0.5 % of reading ± 3 digits
Ripple & noise: Typically < 1 mV rms (CV mode, 20 mHz bandwidth)
Switchable local or remote sensing
Silent fan-free cooling
DC output on/off switch
All outputs are intrinsically short circuit proof, and are protected
against external voltages and reverse currents
Output terminals: Universal 4mm safety binding posts on 19mm
(0.75”) spacing. Terminals can accept fixed shroud 4 mm plugs,
standard 4 mm plugs, fork terminals and bare wires
Dimensions: 1 ¼ module, 312,5(W) x 200(H) mm
Option:
• TTICAL Calibration certificate with results
Copyright: TEKLAB®
34
Variable DC power supplies
DCAEX355R
Variable DC power supply
Output values: 0-35 V, 0-5 A, 175 W
Mixed-mode regulation
Constant voltage or constant current operation
Voltage Setting: By coarse and fine controls
Current Setting: By single logarithmic control
Independent digital voltage and current meters for each output
with 4 digit resolution
Voltage meter:
• Resolution: 10 mV
• Accuracy: 0.3 % of reading ± 3 digits
Current Meter:
• Resolution: 1 mA
• Accuracy: 0.5 % of reading ± 3 digits
Ripple & noise: Typically < 1 mV rms (CV mode, 20 mHz bandwidth)
Switchable local or remote sensing
Silent fan-free cooling
DC output on/off switch
All outputs are intrinsically short circuit proof, and are protected
against external voltages and reverse currents
Output terminals: Universal 4mm safety binding posts on 19mm
(0.75”) spacing. Terminals can accept fixed shroud 4 mm plugs,
standard 4 mm plugs, fork terminals and bare wires
Dimensions: ¾-module, 187,5(W) x 200(H) mm
Option: TTICAL Calibration certificate with results
DCACPX400S
Variable DC power supply
Output values: 0-60 V, 0-20 A, 420 W
PowerFlex design gives variable voltage and current combinations
within a maximum power range
PowerFlex or fixed-range operation plus custom limits
Constant voltage or constant current operation
Variable OVP trips
True analogue controls
Voltage Setting: By coarse and fine controls
Current Setting: By single logarithmic control
Settings locking
Independent digital voltage and current meters for each output with
4 digit resolution
Voltage meter:
• Resolution: 10 mV
• Accuracy: 0.1 % of reading ± 2 digits
Current Meter:
• Resolution: 10 mA
• Accuracy: 0.3 % of reading ± 20 mA
Ripple & noise: Typically < 3 mV rms (CV mode)
Switchable local or remote sensing
View Settings
LED indication of Output On, V/I Limits, CV, CI, Power Limit
Silent fan-free cooling
DC output on/off switch
All outputs are intrinsically short circuit proof
Output terminals can accept fixed shroud 4 mm plugs, standard 4
mm plugs, fork terminals and bare wires
Dimensions: ½ module, 125(W) x 200(H) mm
Option: TTICAL Calibration certificate with results
Copyright: TEKLAB®
35
Variable DC power supplies
DCACPX400D
Variable DC power supply
Output values: 2 x 0-60 V, 0-20 A, 840 W
PowerFlex design gives variable voltage and current
combinations within a maximum power range
PowerFlex or fixed-range operation plus custom limits
Constant voltage or constant current operation
Independent outputs or isolated voltage tracking
Outputs can be wired in series or parallel for 120 V or 40 A
Variable OVP trips
True analogue controls
Voltage Setting: By coarse and fine controls
Current Setting: By single logarithmic control
Settings locking
Independent digital voltage and current meters for each output
with 4 digit resolution
Voltage meter:
• Resolution: 10 mV
• Accuracy: 0.1 % of reading ± 2 digits
Current Meter:
• Resolution: 10 mA
• Accuracy: 0.3 % of reading ± 20 mA
Ripple & noise: Typically < 3 mV rms (CV mode)
Switchable local or remote sensing
View Settings
LED indication of Output On, V/I Limits, CV, CI, Power Limit
Silent fan-free cooling
DC output on/off switch
All outputs are intrinsically short circuit proof
Output can accept fixed shroud 4 mm plugs, standard 4 mm
plugs, fork terminals and bare wires
Dimensions: 1 module, 250(W) x 200(H) mm
Option:
TTICAL Calibration certificate with results
Copyright: TEKLAB®
36
Fixed DC power supplies
TLMB12
Fixed DC power supply
Linear power supply
4 outputs, floating with respect to each other
Outputs can be connected in series or in parallel
Output values:
• Output 1: 1.5 V / 3 V / 4.5 V / 5 V / 6 V / 9 V, 1 A
• Output 2: 5 V / 3.3 V, 3 A
• Output 3: 12 V / 15 V, 1 A
• Output 4: 12 V / 15 V, 1 A
Current limitation indicated by a LED
Ripple: < 10 mVPP
All outputs are short-circuit protected
Voltage accuracy better than 100 mV
Output from 4 mm safety terminals
Dimensions: ½-module, 125(W) x 200(H) mm
DCF series
Fixed DC power supply
Output values:
• DCF1212: 12 V, 12 A DC
• DCF242: 2 x 24 V, 2 A DC
• DCF242R: 24 V, 2 A DC, 250 ohm series resistor
Ripple:
• DCF1212: < 120 mVPP
• DCF242: < 50 mVPP
• DCF242R: < 50 mVPP
Output floating, can be connected in series or in parallel
Overcurrent limiter, indicated by a LED
Outputs from 4 mm safety terminals
Dimensions: ¼-module, 62.5(W) x 200(H) mm
Copyright: TEKLAB®
37
1 phase AC power supplies
ACA23010
1 phase variable AC power supply
Variable transformer 0-230 V, 10 A, max. 2000 VA
Galvanic isolation
Two outputs (one active at a time)
Output 1: socket, unearthed
Output 2: 4 mm safety terminals
Dedicated output ON/OFF buttons, indicator lights
Graphical OLED display
Voltage measurement:
• Resolution: 1 V
• Accuracy: ± 1.5 V
Current measurement:
• Resolution: 0.1 A
• Accuracy: ± 0.15 A
Max-min display
Overvoltage and overcurrent protection, user settable, based on measurements
Electronic and electro-mechanical overload protection
Main switch with indicator light
Start-up current peak limiter
Dimensions: 1 ½ module, 375(W) x 200(H) mm
Options:
• ACASOCKUK UK-socket (BS1363) for ACA power supply
• ACASOCKUS US-socket (NEMA 6-20R) for ACA power supply
• TEKLABCAL Calibration for a TEKLAB device
ACP40COM
1 phase programmable AC power supply
Output values: 0 - 250 V, 0 - 4 A, 900 VA
Galvanic isolation
Digital display for viewing output voltage, current and settings
Setting accuracy and display resolution: 1 V / 0.1 A
Measuring accuracy:
• Voltage: ± 2 V
• Current: ± 0.1 A
Overvoltage protection setting 0 - 250 V, overcurrent protection
setting 0 - 4 A with OFF-position
Short-circuit protection
Outputs from 4 mm safety terminals or from unearthed socket
(one output active at a time)
Output ON/OFF-buttons with indicator lights
Automatic self-test and line voltage measurement when starting
Stability feature for stabilizing output voltage
Firmware update possibility
Ethernet connection
• Control program
• Fast two-way communication
• Versatile user interface enables e.g. automatic measurements without
programming
• Advanced datalogging function enables e.g. simultaneous follow-up and
saving of several quantities, or saving of an individual value by the snapshot
function
LabView-driver
• Advanced TCP/IP based LabVIEW driver speeds up making own applications
Dimensions: ½-module, 125(W) x 200(H) mm
Options:
• ACPSOCKETUK UK-socket for ACP power supply
• ACPSOCKETUS US-socket for ACP power supply
Copyright: TEKLAB®
38
1 phase AC power supplies
ACP100COM
1 phase programmable AC power supply
Output values: 0 - 250 V, 0 - 10 A, 2000 VA
Galvanic isolation
Digital display for viewing output voltage, current and settings
Setting accuracy and display resolution: 1 V / 0.1 A
Measuring accuracy:
• Voltage: ± 2 V
• Current: ± 0.1 A
Overvoltage protection setting 0 - 250 V, overcurrent protection
setting 0 - 10 A with OFF –position
Short-circuit protected
Outputs from 4 mm safety terminals or from unearthed socket
(one output active at a time)
Output ON/OFF-buttons with indicator lights
Automatic self-test and line voltage measurement when starting
Stability feature for stabilizing output voltage
Firmware update possibility
Dimensions: Full-module, 250(W) x 200(H) mm
Ethernet connection
• Control program
• Fast two-way communication
• Versatile user interface enables e.g. automatic measurements without
programming
• Advanced datalogging function enables e.g. simultaneous follow-up and
saving of several quantities, or saving of an individual value by the snapshot
function
LabView-driver
• Advanced TCP/IP based LabVIEW driver speeds up making own applications
Options:
• ACPSOCKETUK UK-socket for ACP power supply
• ACPSOCKETUS US-socket for ACP power supply
Copyright: TEKLAB®
39
3 phase AC power supplies
ACA40016
3 phase AC power supply
A push-button to control variable transformer
Galvanic isolation
Output values:
• Output 1: 0-400 V, 16 A (unearthed socket)
• Output 2: 0-400 V, 16 A (4 mm safety terminals)
Output selection switch, one output active at a time
Analog voltage measurement (L1-N)
Thermal / magnetic circuit breaker
Transformers are placed in separate floor-standing housing
Dimensions: Full-module, 250(W) x 200(H) mm
Options:
• ACM3VVA
ACM3VVA analogue voltage meters 0 - 400 V
• ACM3V160AA
ACM3V160AA analogue current meters 0 - 16 A
MT63
3 phase power supply for motor testing
Test unit for electric motors based on AC-drive technology
For electric motors with operating voltage range of 380-480 V AC
Output current max. 63 A
Control / measurement unit
Measurements with 3 parameters on display at a time: voltage,
current, speed, power, run time, output frequency, Kwh counter,
reserve
Output ON/OFF buttons
4 programmable buttons for test ramps
Software for loading motor parameters
Output connectors for motor test cables 16 A and 63 A
Requires SU363 supply unit
Dimensions: Full-module, 250(W) x 200(H) mm
Standard accessories
• Motor test cable 16 A, 5 m
• Motor test cable 63 A, 5 m
• Alarm light unit
Copyright: TEKLAB®
40
3 phase AC power supplies
RB3
Rectifier
3-phase diode rectifier bridge, no filtration
Can be used also as 1-phase rectifier
Maximum input voltage 700 V AC
Maximum output current: 20 A
Dimensions: ¼-module, 62.5(W) x 200(H) mm
ACM3VVA, ACM3V160AA
Measuring accessory
Measuring accessory for,ACA40016 3 phase AC power supply
3 pcs analog voltmeters, 0-400 V, L1-L2, L2-L3 and L3-L1
(ACM3VVA)
3 pcs analog ammeters 0-16 A, L1, L2 and L3 (ACM3V160AA)
Accuracy. ± 1.5 %
Dimensions: ¼-module, 62.5(W) x 200(H) mm
Copyright: TEKLAB®
41
1 phase AC connections
ACF2304, ACF23010
Isolated 1 phase AC connection
Galvanically isolated AC outlet
Output values:
• ACF2304: 230 V, 4 A, max. 1000 VA
• ACF23010: 230 V, 10 A, max. 2000 VA
Overload protectors for primary / secondary circuits
Electronic attenuator for restricting switching current
Dimensions:
• ACF2304: ½-module, 125(W) x 200(H) mm
• ACF23010: ¾-module, 187.5(W) x 200(H) mm
Options:
• ACFSOCKETUK
ACFSOCKETUK UK socket for AC outlet
• ACFSOCKETUS
ACFSOCKETUS US-socket for AC outlet
ACF1154
Isolated 1 phase AC connection
Galvanically isolated AC outlet
Output: 115 V, 4 A, max. 500 VA
Overload protectors for primary / secondary circuits
Electronic attenuator for restricting switching current
Dimensions: ½-module, 125(W) x 200(H) mm
ACF23010M
AC outlet with isolation level monitoring
AC outlet equipped with isolation level monitoring system
Suitable to be used in medical equipment maintenance
workshops
Provides constant, safe and secure monitoring of electrical
systems with IT type grounding
Very early detection of potential insulation deteriorations, PEwires and isolation transformer malfunctions
Includes a transformer (2300 VA) to enable isolation level
measurements
Output from earthed schuko socket: 230 V: 2300 VA
Overload protection
Dimensions: 1 ¾ module, 375(W) x 200(H) mm
Copyright: TEKLAB®
42
3 phase AC connections
ACF40016G
3-phase AC connection
Two safety earthed AC outputs:
• Output 1: Socket, 230 / 400 V AC, 16 A, 3L+N+PE, 6H, red
• Output 2: 4 mm safety terminals, 230 / 400 V AC, 16 A, 3L+N+PE
Main switch / output selection switch, one output active at a time
Analog ammeters 0-16 A for L1, L2, L3
Thermal / magnetic circuit breaker, 16 A
Dimensions: 1 module, 250(W) x 200(H) mm
ACF4002
Isolated 3-phase AC connection
Two 3-phase AC outputs with galvanic isolation:
• Output 1: Socket, 230 / 400 V AC, 2 A, 3L+N
• Output 2: 4 mm safety terminals, 230 / 400 V AC, 2 A, 3L+N
Main switch / output selection switch, one output active at a time
3 pcs 500 VA ring core isolation transformers
Analog ammeters 0-2 A for L1, L2, L3
Thermal / magnetic circuit breaker, 2 A
Dimensions: 1 ½ module, 375(W) x 200(H) mm
ACF40016
Isolated 3-phase AC connection
Two 3-phase AC outputs with galvanic isolation:
• Output 1: Socket, 230 / 400 V AC, 16 A, 3L+N
• Output 2: 4 mm safety terminals, 230 / 400 V AC, 16 A, 3L+N
Main switch / output selection switch, one output active at a time
3 pcs 3700 VA ring core isolation transformers
Analog ammeters 0-16 A for L1, L2, L3
Thermal / magnetic circuit breaker, 16 A
Includes a separate floor-standing casing for isolation transformers
Dimensions: 1 module, 250(W) x 200(H) mm
Copyright: TEKLAB®
43
Connections
ELPSLxx
1 phase socket outlets
Standard models:
• ELPSL3 3 x schuko sockets
• EPLSL2USB 2 x schuko sockets + 2 x USB charger
• ELPSL3GB 3 x UK-sockets
• ELPSL3GB 2 x UK-sockets + 2 x USB charger
• ELPSL3US 3 x US-sockets
• EPLSL2US 2 x US-sockets + 2 x USB charger
Other socket models also available
Dimensions: ¼-module, 62.5(W) x 200(H) mm
ELPSL3V
3 phase socket outlet
3 phase extra socket
5-pole 16 A CEE socket
Dimensions: ½-module, 125(W) x 200(H) mm
STO40016
Safety terminal outlets
AC outlets from 4 mm safety terminals
3L+N+PE, 400 V, 16 A
Dimensions: ¼-module, 62.5(W) x 200(H) mm
Copyright: TEKLAB®
44
Connections
STRBOX
Storage module
Integrated storage box for the device panel
Powder-painted steel frame
Suitable for storing training sets, test leads etc.
Model
STRBOX500
Internal dimensions
480 (W) x 380(D) x 180(H) mm
PILT
Compressed air connection
2 pcs ½" snap-on connectors
Dimensions: ¼-module, 62.5(W) x 200(H) mm
S40US, S100US
Power transformer
Transformer to power instrument modules in workstations that
are connected to 115 V electrical network
S40US: 115 V / 230 V, 1000 VA, S100US: 115 V / 230 V, 2000 VA
Dimensions:
• S40US: ½-module, 125(W) x 200(H) mm
• S100US: ¾-module, 187.5(W) x 200(H) mm
LAN8
Ethernet switch
8-port 1 G Ethernet switch
1 x RJ45 at the front panel for an optional device
1 x RJ45 at the table frame for laboratory network connection
6 x RJ45 for instrument modules
Copyright: TEKLAB®
45
Connections
LANWBRIDGE
Wireless LAN bridge
A wireless link between a workstation and laboratory Wireless
Access Point
Available also for a single device control
Antenna mounted in the workstation
802.11 a/b/g/n/ac standard
USB1BT, USB1BE
USB connections
USB1T
Single USB-connection between a PC and a panel device
Type B connector at the back of the device panel
USB1BE
Single USB-connection between a laptop and a panel device
Type B connector at the front panel
Dimensions: ¼-module, 62.5(H) x 200(H) mm
Copyright: TEKLAB®
46
Multimeters
DYM61, DYM61UT
Digital multimeter
4 ½ digit display, max. reading 22 000, analogue bar graph
Diode test
Continuity check
Duty cycle measurement
Relativity measurement
Peak value
Data hold
Automatic / manual selection of range
Equipped with power supply
Fuse at the front panel
Standard accessories: manual, test leads, RS232 connection with
USB adapter (DYM61UT), software (DYM61UT)
Dimensions: ½-module, 125(W) x 200(H) mm
DC voltage
AC voltage
DC current
AC current
Resistance
Capacitance
Frequency
Ranges
220 mV – 1000 V
220 mV - 750 V
220 µA - 10 A
220 µA - 10 A
220 Ω - 220 MΩ
22 nF - 220 mF
10 Hz - 220 MHz
Best resolution
0.01 mV
0.01 mV
0.01 µA
0.01 µA
0.01 Ω
0.001 nF
0.001 Hz
Best accuracy, ± (a % of reading + b digits)
0.1 % + 2
0.8 % + 10
0.5 % + 10
0.8 % + 10
0.5 % + 10
3.0 % + 5
0.01 % + 5
DMMHPRO
Digital multimeter
Resolution: ± 12,000 digits, 4½-place
3 connector jacks with patented automatic blocking sockets
TRMS AC and AC / DC function
Automatic and manual measuring range selection
Automatic storage of measured values: DATA / MIN / MAX
Large, light-blue illuminated display with extra-large characters
(15 mm) and an analog bar graph for dynamic processes
Measuring categories: 1000 V CAT III and 600 V CAT IV
16 multimeter functions
Additional filter function and voltage measurement with reduced
input impedance for limiting interference, e.g. for measurements
at frequency converters
Battery Charging Status – Power Saving Circuit
Multimeter integrated with a quick-release mechanism, it can be
used also as a portable instrument
Standard accessories: 1 pair of safety measurement cables (1.5 m)
with 4 mm test probes, 2 batteries, condensed operating
instructions, CD ROM (operating instructions in English and
German), DAkkS calibration certificate
Dimensions: ½-module, 125(W) x 200(H) mm
Options
• CP330 DC/AC current clamp sensor, with 2 measuring ranges
(0.5-30 A, 5-300 A DC/AC rms)
• Z109L Fuses (pack of 10)
DC voltage
AC voltage
DC current
AC current
Resistance
Frequency
Temperature, with type K (NiCrNi) thermocouple, not included
Copyright: TEKLAB®
Ranges
100 mV – 1000 V
100 mV – 1000 V
1 A – 10 A
1 A – 10 A
100 Ω – 40 MΩ
100 Hz – 30 kHz
-250…+1372 °C
Best resolution
10 μV
10 μV
100 μA
1 mA
10 mΩ
0.01 Hz
0.1 °C
Best accuracy, ± (a % of reading + b digits)
0.05 % + 3
0.5 % + 9
0.9 % + 10
1.5 % + 10
0.2 % + 5
0.05 % + 3
1%+5
47
Multimeters
DMMHULT
Digital multimeter
Triple display with a resolution of ±310,000 digits
Intrinsic error: ± (0.02% rdg. + 20 digits)
Measuring functions:
• 1 µV to 600 VDC and 10 µV to 600 VAC/AC+DC TRMS
(bandwidth: 15 Hz to 100 kHz),
• 1 nA to 10 ADC and 10 nA to 10 AAC/AC+DC TRMS (bandwidth:
15 Hz to 10 kHz)
• Resistance, frequency, capacitance and temperature
measurement: 1 mΩ to 30 MΩ, 0.001 Hz to 1 MHz, 1 pF to 3
mF, °C/°F
• dB measuring function
• Fast Acoustic Continuity Test
Automatic range selection and battery cutoff
Min-Max measured value storage
Integrated 2 MByte measurement data memory for approx.
300,000 measured values, sampling rate: 10 ms to 9 hrs.
CAT IV @ 300 V or CAT III @ 600 V per IEC 61010-1
1 kHz / -3 dB low-pass filter can be activated in the alternating
voltage measuring ranges
Instrument can be remote controlled and measurement data
saved via Bluetooth and IR interfaces (optional adapter and
METRAwin10 software needed)
3 connector jacks with patented automatic blocking sockets
Adjustable clamp factor for measurement with current clamp
sensors and transformers
Automatic and manual measuring range selection
Separate battery and fuse compartments
Battery Charging Status – Power Saving Circuit
Multimeter integrated with a quick-release mechanism, it can be
used also as a portable instrument
Standard accessories: KS17-2 cable set, 2 batteries, condensed
operating instructions, CD ROM (operating instructions in English
and German), DAkkS calibration certificate
Dimensions: ½-module, 125(W) x 200(H) mm
Options
• USBUSB -PACK Software for data logging, recording, visualizing
and documenting. Includes IR-USB bidirectional interface
adapter
• Z3409 Pt100 temperature sensor for surface and immersion
measurement, -40 to +600 °C
• CP330 DC/AC current clamp sensor, with 2 measuring ranges
(0.5-30 A, 5-300 A DC/AC rms)
• Z109L Fuses (pack of 10)
DC voltage
AC voltage
DC current
AC current
Resistance
Frequency
Capacitance
Temperature
(MHZ3409 probe)
Copyright: TEKLAB®
Ranges
300 mV – 600 V
300 mV – 600 V
300 µA – 10 A
300 µA – 10 A
300 Ω – 30 MΩ
300 Hz – 1 MHz
3 nF – 3 mF
-40…+600 °C
Best resolution
1 μV
10 μV
1 nA
10 nA
1 mΩ
0.001 Hz
1 pF
0.1 °C
Best accuracy, ± (a % of reading + b digits)
0.02 % + 0.005 % +5 (% rdg + % MR + d)
0.2 % + 30
0.02 % + 0.01 % +5 (% rdg + % MR + d)
0.5 % + 30
0.05 % + 0.01 % +5 (% rdg + % MR + d)
0.05 % + 8
1%+6
0.3 % + 10
48
Multimeters
TEK4050C
Digital multimeter
6.5 Digit Resolution, dual display, graphics
Basic VDC Accuracy of up to 0.0024% (1 yr.)
100 mV to 1000 V Voltage Range, with up to 100 nV Resolution
100 μA to 10 A Current Range, with up to 100 pA Resolution
10 Ω to 1 GΩ Range, with up to 10 μΩ Resolution
CAT I 1000 V, CAT II 600 V
Volts, Ohms, and Amps Measurements
True RMS (AC, AC + DC) Measurements
Diode and Continuity Testing
Frequency and Period Measurements
Temperature and Capacitance Measurements
Math Functions: Zero, dBm, dB, MX+B, Offset, DCV ratio and
TrendPlot, Histogram, Statistics (min/max/average/standard
deviation), and Limit Test
2×4 Ohms 4-wire Measurement Technique
TrendPlot™ Paperless Data Recorder Mode
Measurement Statistics
Histogram Mode
USB Host Port on Front Panel for Easy Storage of Measurement
Data and Instrument Settings
RS-232, LAN, and GPIB Ports on Rear Panel for Quick PC
Connectivity (requires optional connection cable)
Standard accessories: TL710 Test Leads, Calibration Certificate,
Calibration Data Report, Safety and Installation Instructions
including Warranty Statement, CD-ROM with User Manual and
Connectivity Information, RS-232 to USB Adapter Cable, National
Instruments LabVIEW SignalExpress™ Tektronix Edition Limited
Edition Software.
Dimensions: full module, 250(W) x 200(H) mm
Options
• TEKTP750 100 Ω RTD Temperature Probe
• TEKTL705 2×4 Wire Ohm 1000 V Precision Test Lead
• USB1BT USB connection for instrument panel
DC voltage
AC voltage
DC current
AC current
Resistance (2x4 wire)
Frequency
Capacitance
Temperature
Copyright: TEKLAB®
Ranges
100 mV – 1000 V
100 mV – 1000 V
100 μA – 10 A
100 μA – 10
10 Ω – 1 GΩ
3 Hz – 1 MHz
1 nF – 100 mF
- 200°C - + 600°C
Best resolution
100 nV
100 nV
100 pA
100 pA
10 μΩ
0.1 μHz
1 pF
0.001 °C
Best accuracy, ± (a % of reading + b % of range)
0.0024 % + 0.0005 %
0.06 % + 0.03 %
0.05 % + 0.005 %
0.1 % + 0.04
0.01 % + 0.001 %
0.01 % of measurement
1 % + 0.5 %
± 0.06 °C
49
LCR meters
LCR400S1
LCR meter
Parameters Measured:
• Resistance: 0.1m to 990M
• Inductance: 0.001µH to 9900H
• Capacitance: 0.001pF to 99000µF
• D: 0.001 to 999
• Q: 0.001 to 999
0.1 % measurement accuracy
Parameter Selection: Manual or automatic selection of R, L or C
Measurement Modes: Series or parallel equivalent circuit
Range Hold: Prevents autoranging when changing components
Measurement Freq.: Selectable as 100Hz/120Hz, 1kHz, 10kHz
Automatic component recognition
Dual 5 digit high brightness display
Non-volatile memory for up to nine complete instrument set-ups
for rapid recall
Comprehensive facilities for sorting components into ‘Bins’
according to value. Up to eight pass bins and two fail bins can be
defined.
Software allows results to be logged onto a PC (save to a file and
to the screen) and enables instrument set-ups to be saved and
restored
Built-in four terminal sprung-jaw test fixture with pillar adaptors
making it suitable for use with both axial and radial components.
High quality four terminal SMD tweezers for measuring surface
mount components
An adaptor converts the built-in test fixture into a set of four BNC
sockets. This can be used to connect external test fixtures or test
lead sets
A high quality Kelvin Clip test lead set suitable for precision four
terminal measurements
Full numeric keyboard
Input voltage: 230 V or 115 V ± 14%, 50/60Hz
Dimensions: 360 x 240 x 95 mm
Options
• LCR400S1CAL Calibration certificate with results
Copyright: TEKLAB®
50
Function generators
FG8216A
Function generator
Frequency range: 0.3 Hz - 3 MHz, 7 ranges
Waveforms: sine, square, triangle, ramp
TTL/CMOS output
6 digit display
Amplitude: 10 VPP (into 50 ohm load)
DC offset: ± 5 V (into 50 ohm load)
Duty cycle control with signal inversion capability
Two-step (-20 dB × 2) and variable attenuator
Standard accessories: power cord, instruction manual, test leads
Dimensions: 1 module, 250(W) x 200(H) mm
AFG1000 series
Arbitrary / function generator
Dual-channel, 25 MHz or 60 MHz sine waveforms, 12.5 MHz or 30
MHz square waveforms
14 bits, 125 MS/s or 300 MS/s arbitrary waveforms with 8 k points
or 1 M points record length
Amplitude 1 mVp-p to 10 Vp-p into 50 Ω loads
Continuous, sweeping, burst, and modulation modes (AM, FM,
PM, ASK, FSK, PSK, PWM) covers most requirements for students
and other users to get the experiments/test job done
64-MByte internal non-volatile memory for arbitrary waveform
storage
Standard USB host/device for memory expansion and remote
control
Free ArbExpress makes user defined waveforms editing
extremely easy through an external USB memory stick
Standard accessories: Safety and Compliance Instructions,
Documentation CD, Certificate of calibration; USB cable x 1, Type
A to Type B, BNC cable x 2, Fuse, cartridge (5 x 20 mm, 0.5 A, 250
V, time-delay) Fuse, cartridge (5 x 20 mm, 1 A, 250 V, time-delay)
Dimensions: full module, 250(W) x 200(H) mm
Options
• HZ16 Test leads for function generator
• USB1BT USB connection for instrument panel
Channels
Frequency range, sine wave
Display
Waveforms
Amplitude into 50 Ω
Frequency setting
resolution
Memory depth
Arbitrary waveform sample
rate
Arbitrary waveform vertical
resolution
Copyright: TEKLAB®
AFG1022
AFG1062
2
2
1 µHz to 25 MHz
1 µHz to 60 MHz
3.95-inch, resolution 480 by 320, colors 65,536
Sine, Square, Pulse, Ramp, Noise, and 45 frequently used arbitrary waveforms
1 mVp-p to 10 Vp-p
1 mVp-p to 10 Vp-p (≤ 25 MHz),
1 mV p-p to 5 V p-p (> 25 MH<)
1 μHz or 12 digits
125 MS/s
64 MByte
300 MS/s
14 bits
51
Function generators
AFG3000C series
Arbitrary / function generator
Today’s designs are often complex, demanding a variety of stimulus
signals during test. With 12 standard waveforms, arbitrary waveform
capability, and signal impairment options, the AFG3000C Series
supports a wide range of application needs with one instrument.
Best-in-class performance ensures signals are accurately
reproduced.
A large display and 25 shortcut keys make the AFG3000C Series
both easy to learn and easy to use.
5.6” color display for full confidence in settings and waveform
shape
Multi-language and intuitive operation saves set-up time
AM, FM, PM, FSK, PWM
Sweep and burst
Pulse waveform with variable edge times
128 k memory for arbitrary waveforms
Time base with only ± 1 ppm drift per year
Dual channel models save cost and bench space
USB connector on front panel for waveform storage on memory
device
USB, GPIB and Ethernet
Standard accessories: manuals, ArbExpress™ software, NISTtraceable calibration certificate
Dimensions: 1½-module, 375(W) x 200(H) mm
Options
• HZ16 Test leads for function generator
• USB1BT USB connection
Channels
Frequency
range
Display
Waveforms
Amplitude
into 50 Ω
Frequency
setting
resolution
Memory
depth
Arbitrary
waveform
sample rate
Arbitrary
waveform
vertical
resolution
AFG3011C
1
1 μH - 10 MHz
AFG3021C
1
1 μH - 25 MHz
AFG3052C
2
1 μH - 50 MHz
AFG3101C
1
1 μH - 100 MHz
AFG3252C
2
1 μH - 240 MHz
5.6” color LCD
Sine, Square, Pulse, Ramp, Triangle, Sin(x)/x, Exponential Rise & Decay, Gaussian, Lorentz, Haversine, DC,
Noise
20 mVPP – 20 VPP
10 mVPP – 10 VPP
10 mVPP – 10 VPP
20 mVPP – 10 VPP
50 mVPP – 5 VPP
1 μHz or 12 digits
128 k
250 MS / s
Copyright: TEKLAB®
250 MS / s
1 GS / s
1 GS / s
2 GS / s
14 bits
52
Oscilloscopes
TBS1000B, TBS1000BEDU series
Digital storage oscilloscopes
The TBS1000BEDU digital storage oscilloscope series is designed
specifically to meet the needs of today's schools and universities.
It's the first oscilloscope to use an innovative new Courseware
system that enables educators to seamlessly integrate teaching
materials onto TBS1000BEDU oscilloscopes.
The Courseware information is presented directly on the
oscilloscope display and can be used to provide; step by step
instructions, background theory, hints and tips or an efficient way
for students to document their lab work.
The TBS1000B series is designed to industrial users including
similar design compared TBS1000BEDU series. In addition,
TBS1000B models are equipped with Built-in waveform limit and
TrendPlot™ testing.
7 inch WVGA (800X480) Active TFT Color Display
34 automated measurements
Dual window FFT, simultaneously monitors both the time and frequency
domains
Integrated Courseware feature: Lab content can be loaded directly onto the
oscilloscope, Students can review lab content, perform step-by-step instructions,
record lab results and create lab reports all on the scope (TBS1000BEDU only)
Built-in waveform limit and TrendPlot™ testing (TBS1000B only)
Automated, extended data logging feature (TBS1000B only)
Dual channel frequency counter
Zoom Function
Advanced triggers including pulse and line-selectable video triggers
Autoset and signal auto-ranging
Autoset enable/disable feature with password protection (TBS1000BEDU only)
USB 2.0 host port on the front panel for quick and easy data storage
USB 2.0 device port on rear panel for easy connection to a PC
Multiple language user interface
Dimensions: 1¾-module, 437.5(W) x 200(H) mm
Standard accessories
• Passive probes (one per channel)
• OpenChoice Software
• LabVIEW driver
• CD including: Courseware Editor software, Example Courseware labs,
oscilloscope tutorials (TBS1000BEDU)
• Traceable certificate of calibration – NIM/NIST
Recommended accessories
• USB1BT USB connection
Channels
Bandwidth
Sample rate
(each channel)
Record length
(each channel)
Vertical
resolution
Vertical
sensitivity
Time base
range (s/div)
Copyright: TEKLAB®
TBS1052BEDU
2
50 MHz
1 GS/s
TBS1102BEDU
2
100 MHz
2 GS/s
TBS1102B
2
100 MHz
2 GS/s
TBS1202B
2
200 MHz
2 GS/s
2500
2500
2500
2500
8 bits
8 bits
8 bits
8 bits
2 mV – 5 V / DIV
2 mV – 5 V / DIV
2 mV – 5 V / DIV
2 mV – 5 V / DIV
2.5 ns – 50 s
2.5 ns – 50 s
2.5 ns – 50 s
2.5 ns – 50 s
53
Oscilloscopes
TPS2000B series
Digital storage oscilloscopes
As an engineer or technician, you must often make floating, or
differential, measurements. And you may need to develop and test
designs in a variety of challenging environments that demand
versatility.
You can quickly tackle these tough challenges to speed the design,
troubleshooting, installation, and maintenance of components and
systems with the TPS2000 Series oscilloscopes.
Fully isolated and floating channels, plus isolated external trigger
Optional power application software offers the broadest range of
power measurements at its price point
FFT standard on all models
Advanced triggers to quickly capture the event of interest
Easily operate the oscilloscope with traditional, analog-style
knobs and multi-language user interface
Simplify setup and operation with autoset menu, autorange,
waveform and setup memories, and built-in, context-sensitive
help
Adjust the oscilloscope to your operating environment with
backlit menu buttons/display and brightness/contrast controls
11 automatic measurements
Connectivity: RS-232 (USB adapter), Centronics, CompactFlash
Dimensions: 1½-module, 375(W) x 200(H) mm
Standard accessories
• P2220 - 200 MHz, 10x/1x switchable passive probes (one per
channel)
• User manual
• OpenChoice PC communication software
• Traceable certificate of calibration – NIM/NIS
Recommended accessories
• TPS2PBND2
TPS2PBND2 Power bundle for TPS2000 series oscilloscopes.
Includes (4) P5120 passive, high-voltage probes and TPS2PWR1
power measurement and analysis software
• TPS2PWR1 - Power measurements application package.
Instantaneous power waveform analysis, waveform analysis,
harmonic analysis, switching loss, phase angles, dv/dt and
di/dt cursor
Channels
Bandwidth
Sample rate
(each channel)
Record length
(each channel)
Vertical
resolution
Vertical
sensitivity
Time base
range (s/div)
Copyright: TEKLAB®
TPS2012B
2
100 MHz
1.0 GS/s
TPS2014B
4
100 MHz
1.0 GS/s
TPS2024B
4
200 MHz
2.0 GS/s
2500
2500
2500
8 bits
8 bits
8 bits
2 mV to 5 V/div
2 mV to 5 V/div
2 mV to 5 V/div
5 ns to 50 s/div
5 ns to 50 s/div
2.5 ns to 50 s/div
54
Oscilloscopes
DPO2000B, MSO2000B series
Digital phosphor / mixed signal oscilloscopes
The power to solve problems quickly - The DPO2000B /
MSO2000B Series digital phosphor oscilloscopes delivers the
performance and tools you need to visualize your signals and
find answers quickly.
They provide 1 M points of usable record length on all
channels, serial trigger and decode analysis options, a variable
low-pass filter that also allow you to see signal details to the
oscilloscope’s full bandwidth, and all this in a compact form
factor.
The MSO2000 Series adds 16 integrated digital channels,
enabling you to visualize and correlate analog and digital
signals on a single instrument. This integration extends
triggering functionality across all 20 channels, which is ideal
for debugging mixed analog and digital signals.
Ability to time correlate up to 4 analog and 16
digital channels (MSO series)
Parallel bus trigger and analysis (MSO series)
Multichannel setup and hold triggering (MSO
series)
7“ bright, widescreen, TFT-LCD color display
I2C, SPI, CAN, LIN, RS232/422/485/UART serial
triggering, decode and analysis options
Wave Inspector controls provide unprecedented
efficiency in waveform analysis
FilterVu variable low-pass filter allows for removal
of unwanted signal noise while still capturing highfrequency events
USB 2.0 on front panel for quick and easy data
storage
USB 2.0 device port for direct PC control of
oscilloscope using USBTMC
Plug-and-play connectivity and analysis software
solutions
eScope remote viewing and control
Optional Ethernet and Video Out ports
TekVPI Probe Interface supports active, differential
and current probes for automatic scaling and units
Dimensions: 1¾-module, 437.5(W) x 200(H) mm
Channels
Bandwidth
Sample rate (each channel)
Waveform capture rate
Record length (each channel)
Vertical resolution
Vertical sensitivity
Time base range (s/div)
Rise time
Copyright: TEKLAB®
Standard accessories
• P2221 - 200 MHz, 1x/10x passive probe (one per
channel)
• P6316 16-channel logic probe and accessory kit
(MSO series)
• User manual
• OpenChoice PC communication software
• NI LabVIEW SignalExpress Tektronix Edition LE
• Traceable certificate of calibration – NIM/NIST
Recommended accessories
• DPO2AUTO - Automotive serial triggering and
analysis module (CAN & LIN buses)
• DPO2EMBD - Embedded serial triggering and
analysis module (I2C & SPI buses)
• DPO2COMP - Computer serial triggering and
analysis module (RS-232/422/485/UART buses)
• DPO2CONN - Adds Ethernet (10/100Base-T) and
Video Out Port
• EDUKIT - Educator’s resource kit for MSO
oscilloscope
DPO2002B,
MSO2002B
2, 2 + 16
70 MHz
DPO2012B,
MSO2012B
2, 2 + 16
100 MHz
DPO2014B,
MSO2014B
4, 4 +16
100 MHz
1.0 GS/s
5 000 wfms/s
1M
8 bits
5 ns
2 mV to 5 V /div
4 ns to 100 s
3.5 ns
3.5 ns
DPO2024B,
MSO2024B
4, 4 + 16
200 MHz
2 ns to 100 s
2.1 ns
55
Power analyzers
PMMHENE
1 phase power analyzer
RMS measurement with the following and more: V AC TRMS, V
AC+DC TRMS 100 kHz bandwidth, V DC, dB, Hz (V), Hz (A), Ω, µF, V
diode, °C / F (TC / RTD)
Power measurement: (W, VAr, VA, PF): active, reactive and
apparent power with extreme values, power factor
Energy measurement: (Wh, VArh, VAh) active, reactive and
apparent energy, mean power value with adjustable observation
period and maximum value
Mains quality analysis: recording of over and undervoltage, dips,
swells, voltage peaks and transients in 0, 50 and 60 Hz systems
Harmonic analysis: RMS values and distortion components up to
the 15thharmonic at 16.7, 50, 60 and 400 Hz
Special measurements: Crest factor (CF), conductivity (nS), low
MHPMA16
impedance (RSL), duty cycle (%), cable length (km)
Fast Acoustic Continuity Test
Automatic / Manual Measuring Range Selection
Triple display, display illumination can be activated for difficult
lighting conditions
Resolution: 60,000 digits (4 6/7 place)
1 kHz / -3 dB low-pass filter can be activated
Direct current measurement from 10 nA to 10 A, 16 A intermittently, current measurement with current clamp
transformers and sensors, transformation ratio is taken into account at the display
Measurement data memory for up to 300,000 measured values
Instrument is fully remote controllable without activating the rotary switch or changing current sockets
Infrared interface to PC for data exchange and parameters configuration (optional: IR-USB adapter and
METRAwin10 software)
Battery Charging Status – Power Saving Circuit
Power analyser is integrated with a quick-release mechanism, it can be used also as a portable instrument
Standard accessories: KS29 safety measurement cable set consisting of 3 measuring cables (1 black, 1 blue, 1 red)
with 90° offset safety plugs, test probes and 3 safety caps for CAT IV, 1000 V CAT II 16 A / 600 V CAT IV 1 A, 2
batteries, condensed operating instructions, CD ROM (operating instructions in English and German), DAkkS
calibration certificate
Dimensions: ½-module, 125(W) x 200(H) mm
Options
• PMA16 Power Measuring Adapter
• USB
USB -PACK Software for data logging, recording, visualizing and documenting. Includes IR-USB bidirectional
interface adapter
• Z3409 Pt100 temperature sensor for surface and immersion measurement, -40 to +600 °C
• WZ11A AC current transformer clamp, 1-200 A, 600 V CAT III, suitable for power measurements
• CP330 DC/AC current clamp sensor, with 2 measuring ranges (0.5-30 A, 5-300 A DC/AC rms)
• Z109L Fuses (pack of 10)
DC voltage
AC voltage
DC current
AC current
Resistance
Frequency
Capacitance
Temperature
(MHZ3409 probe)
Apparent power
Active power
Reactive power
Copyright: TEKLAB®
Ranges
60 mV – 600 V
60 mV – 600 V
600 µA – 10 A
600 µA – 10 A
600 Ω – 60 MΩ
600 Hz – 1 MHz
60 nF – 600 µF
-40…+600 °C
Best resolution
1 μV
1 μV
10 nA
10 nA
10 mΩ
0.01 Hz
10 pF
0.1 °C
Best accuracy, ± (a % of reading + b digits)
0.02 % + 15
0.2 % + 30
0.05 % + 20
0.5 % + 25
0.1 % + 5
0.05 % + 5
1%+6
0.3 % + 15
360 µW – 6 kW
10 nW
0.4 % + 20
56
Power analyzers
PM3
3 phase power analyser
Multi-measurement
• Currents:
• instantaneous: I1, I2, I3, Isystem
• average/maximum average: I1, I2, I3
• Voltages & frequency:
• instantaneous: V1, V2, V3, U12, U23, U31, F, Vsystem,
Usystem
• average/maximum average: V1, V2, V3, U12, U23, U31, F
• Power:
• instantaneous: 3P, ΣP, 3Q, ΣQ, 3S, ΣS
• maximum average: ΣP, ΣQ, ΣS
• predictive: (ΣP), (ΣQ), (ΣS)
• Power factors:
• instantaneous: 3PF, ΣPF
• average/maximum average: ΣPF
Metering:
• Active energy: +/- kWh
• Reactive energy: +/- kvarh
• Apparent power: kVAh
• Hours
Harmonic analysis
• Total harmonic distortion
• Currents: thd I1, thd I2, thd I3
• Phase-to-neutral voltage: thd V1, thd V2, thd V3
• Phase-to-phase voltage: thd U12, thd U23, thd U31
TRMS
Large backlit LCD display
Multiple viewing screens with direct pushbutton access
Connections with 4 mm safety terminals (L1, L2, L3, N)
Dimensions: ¾-module, 187.5(W) x 200(H) mm
AC voltage
AC current
Power
Power factor
Frequency
Energy, active
Energy reactive
Copyright: TEKLAB®
Ranges
50 - 700 V (phase-to-phase)
0-25 A
NA
NA
45-65 Hz
NA
NA
Best resolution
0.01 V
1 mA
NA
NA
NA
NA
NA
Best accuracy, a % of reading
0.2 % + 1
1%+1
1%
1%
0.1 %
Class 0.5 S
Class 2
57
RF equipment
FSC3, FSC6
Spectrum analyzers
FSC is a compact, cost-efficient solution that offers all essential
features of a professional spectrum analyzer. It covers a wide range
of applications from simple development tasks to production, or
can be used for training RF professionals.
Moreover, it is ideal for applications in service or maintenance. A
wide selection of accessories is available to suit your application.
Frequency range 9 kHz to 3 GHz (FSC3) or 6 GHz (FSC6)
Resolution bandwidths 10 Hz to 3 MHz
High sensitivity (< –141 dBm (1 Hz), with optional preamplifier < –161
dBm (1 Hz )
Low measurement uncertainty (< 1 dB)
Frequency counter with 0.1 Hz resolution
Limit line monitoring (pass/fail function) for indicating whether
the DUT complies with defined limits
Measurement of harmonics and total harmonic distortion
Storage of measurement results on USB stick
LAN and USB interface for remote control and transfer of
measurement data
FSCView software for simple documentation of measurement
results
Easy operation via keyboard and a rotary knob
Low power consumption (12 W)
Dimensions: 1 ¼-module, 312.5(W) x 200(H) mm
SMC100AB101, SMC100AB103
Signal generators
The analog SMC100AB101/103 sets standards for attractively-priced
signal generators. It has the smallest size and the best
price/performance ratio in its class.
The flexible and versatile instrument is suited for use in service and
maintenance labs. Due to its small dimensions and lightweight
design, the SMC100AB101/103 is also the perfect choice for field
applications or training and education environments.
A wide selection of accessories is available to suit your application.
Frequency range
• 9 kHz to 1.1 GHz (SMC100AB101)
• 9 kHz to 3.2 GHz (SMC100AB103)
Typical maximum level of above +17 dBm
Analog modulation modes (AM/FM/φM/pulse modulation)
integrated as standard
Remote control compatibility with other signal generators
Integrated overvoltage protection
Wear-free electronic attenuator
Simplified error diagnostics through built-in selftests
Low SSB phase noise of typ. –111dBc
Wideband noise of typ. –148 dBc
Nonharmonics of typ. –72 dBc
Level uncertainty <0.9 dB
Frequency and level setting times <5 ms
Dimensions: 1 ¼ module, 312.5(W) x 200(H) mm
Copyright: TEKLAB®
58
Calibration equipment
MC6WS
Advanced calibrator and communicator
MC6 Workstation is an advanced, high-accuracy panel mounted
calibrator and communicator, which replaces several
measurement devices. It offers calibration capabilities for pressure,
temperature and various electrical signals.
The MC6 Workstation also contains a full fieldbus communicator
for HART, FOUNDATION Fieldbus and Profibus PA instruments as
option.
MC6 Workstation measurement, generation and simulation
functions
• Pressure measurement
• Voltage measurement and generation
• Current measurement and generation
• Resistance measurement and simulation
• RTD measurement (two simultaneous channels) and simulation
• TC measurement (two simultaneous channels) and simulation
• Frequency measurement and generation
• Pulse counting and generation
• Switch state sensing
• Built-in 24 VDC loop supply
• Field communicator for HART, FOUNDATION Fieldbus and
Profibus PA (option)
User-interface modes
• Meter - a simple and easy way to measure
• Calibrator - measure or generate/simulate two signals at a time
• Documenting Calibrator - perform automated, documented calibrations of process instruments (option)
• Data Logger - perform multichannel (up to 9 channels) data logging (option)
• Communicator - communicator for HART, FOUNDATION Fieldbus and Profibus PA instruments (option)
• Settings - manage settings of the MC6 Workstation
The MC6 Workstation has specifications for short-term accuracy and for 1-year total uncertainty.
Brief summary of the Accuracy figures:
• Pressure accuracy starting from ±(0.005% FS + 0.00125% of reading)
• Temperature - RTD temperature measurement accuracy starting from ±0.011°C
• Electric - Current measurement accuracy starting from ±(0.75 μA + 0.0075% of reading)
Module dimensions: 1 module, 250(W) x 200(H) mm
Standard accessories
• Accredited calibration certificate
• User guide
• Computer cable (USB)
• Test leads and clips
• CD-ROM with user manual, software tools and product information
Options
• MC6DC – Documenting calibrator option
• MC6DL – Multichannel data logger option
• MC6FF – FOUNDATION Fieldbus communication option
• MC6FHW – Fieldbus hardware capability
• MC6HART – HART communicator option
• MC6PA – Profibus communicator option
• MC6PCC – Pressure controller communication for POC6
• MC6TBC – Temperature block communication for FB/MB
• CMXE
CMXE - Calibration software, demo version
• CMXPRO - Calibration software
Copyright: TEKLAB®
59
Calibration equipment
P
Pressure measurement modules for MC6WS
P pressure measurement modules incorporate advanced
pressure measurement technology resulting in only a few P
modules being required to cover a wide pressure range with
excellent uncertainty.
Barometric module PB measures the ambient barometric
pressure. When the barometric module is incorporated in the
system, the ranges of all other pressure measurement modules
can be displayed both in gauge and absolute pressure.
The read out from P modules is displayed in the MC6 Workstation
module.
Module dimensions: ¼ module, 62.5(W) x 200(H) mm
Unit
PB
P10mD
P100m
P400mC
P1C
P2C
P6C
P20C
P60
P100
P160
P250
P600
Copyright: TEKLAB®
Range
800 to 1200 mbar abs
± 10 mbar dif
0 to 100 mbar
± 400 mbar
± 1 bar
-1 to 2 bar
-1 to 6 bar
-1 to 20 bar
0 to 60 bar
0 to 100 bar
0 to 160 bar
0 to 250 bar
0 to 600 bar
Resolution
0.1 mbar
0.001 mbar
0.001 mbar
0.01 mbar
0.00001 bar
0.00001 bar
0.0001 bar
0.0001 bar
0.001 bar
0.001 bar
0.001 bar
0.01 bar
0.01 bar
1 year uncertainty (±)
0.5 mbar
0.05 % span + 0.1 % rdg
0.025 % fs + 0.025 % rdg
0.02 % fs + 0.025 % rdg
0.015 % fs + 0.025 % rdg
0.01 % fs + 0.025 % rdg
0.01 % fs + 0.025 % rdg
0.01 % fs + 0.025 % rdg
0.01 % fs + 0.025 % rdg
0.01 % fs + 0.025 % rdg
0.01 % fs + 0.025 % rdg
0.015 % fs + 0.025 % rdg
0.015 % fs + 0.025 % rdg
60
Calibration equipment
VG200
Current and voltage generator
VG200 is a variable constant current and constant voltage source
with output and measurement part. VG200 is designed especially for
the calibration of measuring instruments, sensors and transmitters.
Equipped with a 4.5 digit LCD display
Selection of current and voltage ranges with a switch
Short-circuit protection and galvanic isolation
Output
• Current ranges: 0-20 mA, 0-50 mA, 0-200 mA, stepless
adjustment, best accuracy ± 0.08 %
• Voltage range: 0-200 mV, accuracy ± 0.06 %
• Capacity: 50 mA DC into a 350 Ω load, 200 mA DC into a 100 Ω
load
Measurement
• Current range: 0-200 mA DC, accuracy ± 0.1 %
• Voltage range: 0-200 mV DC, 0-20 V DC, best accuracy ± 0.06 %
Dimensions: ½ module, 125(W) x 200(H) mm
FB
Field temperature block
Size (L x W x H): 295 x 185 x 290 mm
Computer interface: RS232
Accredited calibration certificate
Option: Built-in reference input (R model)
Optional accessories:
• Inserts
• Transport case
• Beamex® Smart Reference Probe (for R model)
Model
FB150 / FB150R
FB350 / FB350R
FB660 / FB660R
Range
-25 ºC...+150 ºC
+33 ºC...+350 ºC
+50 ºC...+660 ºC
Display accuracy
± 0.2 ºC
± 0.2 ºC
± 0.35...0.5 ºC
Stability
± 0.01 ºC
± 0.02…0.03 ºC
± 0.03...0.05 ºC
PO
Pressure output modules
PO pressure output modules are designed to regulate vacuum
and pressure sources with high precision.
For pressures up to 20 bar (290 psi), a regulator in combination
with an adjustable volume is used to help achieving the exact
pressure.
High-pressure modules come with high-pressure regulators
combined with needle valves.
Module dimensions: 1 module, 250(W) x 200(H) mm
PO20 module dimensions: ½ module, 125(W) x 200(H) mm
Model
PO8C
PO20
PO60
PO160
PO250
Copyright: TEKLAB®
Range
-0.95 to 8 bar / -13.7 to 116 psi
0 to 20 bar / 0 to 290 psi
0 to 60 bar / 0 to 870 psi
0 to 160 bar /0 to 2320 psi
0 to 250 bar / 0 to 3625 psi
61
Calibration equipment
POC8
Automatic pressure controller
POC8 is an accurate and user-friendly automatic pressure
controller, providing regulated output from vacuum to 200 bar.
POC8 is designed for applications requiring automatic pressure
testing and calibration. POC8 communicates with MC6WS
(optional). POC8 automatically regulates the pressure output
signal according to commands from MC6WS, enabling fully
automated calibration of pressure transmitters and other
pressure instruments.
Display: 7.0” color LCD with resistive touch screen
1 year uncertainty: < 0.02 % of Span
Control stability: < 0.005 % of Span ( Active Range)
Communicates with MC6WS, enabling fully automated pressure
transmitter calibration
Pressure/vacuum supply to the module
• Supply Pressure Maximum 110% FS of control range. Minimum
1.38bar (20 psi) over the required controlled pressure.
• This module requires external pressure and/or vacuum supply.
Appropriate low pressure and vacuum supply connecting kit
with adapters is included.
Pressure media: Dry, clean air or nitrogen
Module dimensions: 1 ¾ module, 437,5W) x 200(H) mm
Base models
POC810BARBASE
Range
-1 to 10 bar
POC8100BARBASE
-1 to 100 bar
POC8210BARBASE
-1 to 210 bar
Measurement modules
POC810BARMM1C
POC810BARMM6C
POC810BARMM350mC
POC810BARMMB
POC8100BARMM6C
POC8100BARMM20C
POC8100BARMM100C
POC8100BARMMB
POC8210BARMM20C
POC8210BARMM100C
POC8210BARMM210C
POC8210BARMMB
Range
±1 bar
-1 to 6 bar
±350 mbar
absolut range
-1 to 6 bar
-1 to 20 bar
-1 to 100 bar
absolut range
-1 to 20 bar
-1 to 100 bar
-1 to 210 bar
absolut range
POA10A
Adjustable compressed air supply
Regulated precision air supply
Three selectable outputs:
• Output 1: network pressure
• Output 2: 1.4 bar, constant
• Output 3: 0.15-10.00 bar, adjustable
Outputs 1 and 3 equipped with analog pressure gauges, 0-10 bar
Sensitivity 0.3 mbar
Flow capacity 68 m3 / h
Solenoid valve in the supply
All connections with snap-on connectors, 6/4 mm male
connector as standard
Dimensions: ½ module, 125(W) x 200(H) mm
Copyright: TEKLAB®
62
Calibration equipment
PG
Calibration pumps
PG series includes hand-held, lightweight pressure and vacuum
sources for field use.
PG series of hand pumps are ideal pressure/vacuum generators to
be used as accessories for pressure and vacuum calibration.
PGV - Pressure Generator Vacuum
Output pressure: 0...-0.95 bar / 0...-13.7 psi
Pressure media: air
Outlet connector: G 1/8” male 60° int. cone
Dimensions: diameter: 35 mm, length: min 230
mm, max 322 mm, weight: 340 g
PGL
PGL - Pressure Generator Low
Output pressure: -400...400 mbar / -160...160 psi
Pressure media: air
Output threads: 1 x G 1/8" female
Standard accessories:
• Output connectors: G 1/8” / 60 - G 1/8” installed
in the pump; Nipple for 4 mm ID hose
• Small bag (about 10 pcs) of o-rings in size and
type: 10.1 mm x 1.6 mm NBR 70
PGM - Pressure Generator Medium
Output pressure: 0...20 bar / 0...300 psi
Pressure media: air
Outlet connector: G 1/8” male 60° int. cone
Dimensions: 223 mm x 96 mm x 38 mm, weight:
400 g
PGP
PGPH - Pressure Generator Pneumatic High
Output pressure: -0.95...140 bar / -13.7...2000 psi
Pressure media: air
Output threads: 2 x G 1/4" female
Standard accessories:
• Output connectors: G 1/4" (Male) Plug x 1
• Small bag (about 20 pcs) of o-rings (sealing
rings) type NBR70 (size 6x2)
PGXH - Pressure Generator Extra High
Output pressure: 0 ...700 bar / 0 ...10000 psi
Pressure media: distilled water or mineral based
hydraulic oil
Fine adjustment: with adjustable volume control
PGXH is delivered with:
• Carrying case
• Pressure Measurement Hose (1 meter)
• Filling bottle
• 3/8" plug and 3/8" to 1/4" BSP female adapter
• BSP male / 1215 connector
• NPT male / 1215 connector
PB0004B
Electrical vacuum pump
Mains supply: 230 V 50 Hz (p/n 9427230), 110 V 60 Hz (p/n 9427110)
Nominal motor rating: 0.1 kW
Nominal motor speed: 2700 min-1 (50 Hz), 3200 min-1 (60Hz)
Ultimate vacuum: 7 mbar
Nominal displacement: 4 m3/h
Sound level (DIN 45635): 59 dB (A)
Oil filling: 0.06 l
Oil: standard hydraulic oil, viscosity 32 (ISO)
Weight: 5.1 kg
Dimensions: 133(W) x 141(H) x 230(D) mm (230 V 50 Hz), 148(W) x
141(H) x 230(D) mm (110 V 60 Hz)
Mains lead: without plug (to be added depending on the
installation)
Options
• VACUUMPSW Switch module for vacuum pump
• VACUUMPUMPJ Bracket for pump in Concept workstation
• WHV820472 Bracket for pump in TowerLine workstation
Copyright: TEKLAB®
63
Calibration equipment
CALABTRK
Process instrument kit for calibration training
Process instrument kit is applicable
ap plicable for following training areas
Calibration of process instruments such as
• Pressure transmitters, switches and gauges
• Electrical converters, frequency meters
• Temperature transmitters, thermocouples, RTDs
HART, FOUNDATION Fieldbus, Profibus PA
Automatic pressure and temperature calibration
Documenting and management of calibrations
Contents
Case
Background material about calibration, does not include training
exercises
Pressure transmitters:
• HART® type: 0-10 bar, 4-20 mA. Including pressure
connector to MC5P hose set
Temperature transmitter with Pt100 sensor
• HART® type: 0-800 °C, 4-20 mA, PT100 (385)
• Pt100 (385) sensor, 6 mm
Temperature transmitter
• Foundation Fieldbus type (OPTION)
Pressure switch
• Pressure switch, adjustable switch set point 3-7 bar gauge.
• Including pressure connector to MC5P hose set
Thermocouple:
• K-element, 3 mm, including K-element connector
DB
Decade boxes
DBRS, DBLS and DBLC series include decades for resistance,
inductance and capacitance.
Direct reading — No fumbling with multiple slide or rotary
switches
The IET family of digital substituters uses convenient side-by-side
thumbwheel switches. Simply dial in the desired values and use
For easy value readings, ranges are separated by color coded
switches and numbers.
Accuracies of 0.1%, 1.0 % and 2.0 %
Product
DBRS201W
DBRSB8WC
DBLS400
DBCS301
DBCS301L
Copyright: TEKLAB®
Description
Resistance decade
Resistance decade
Inductance decade
Capacitance decade
Capacitance decade
Range
0 – 100 MΩ
0 – 1 MΩ
0 – 10 H
0 – 100 µF
0 – 10 µF
Resolution
0.1 Ω
0.01 Ω
1 mH
100 pF
1 pF
Accuracy
± (0.1 % + 36 mΩ)
± 0.1 %
± (2 % + 0.5 µH)
± (1 % + 3 pF)
± (1 % + 3 pF)
Dimensions
¾-module, 187.5(W) x 200(H) mm
¾-module, 187.5(W) x 200(H) mm
¾-module, 187.5(W) x 200(H) mm
¾-module, 187.5(W) x 200(H) mm
¾-module, 187.5(W) x 200(H) mm
64
Test equipment
TISECUTESTPRO, TISECULIFESTBASE
Test instrument for electrical safety
Test instruments for measuring electrical safety of devices per
VDE 0701-0702, IEC 62353 and IEC 60974-43
Measurements
• Protective conductor resistance
• Insulation resistance
• Protective conductor current, RMS value
• Touch current, RMS value
• Device leakage current, RMS value
• Leakage current from the application part, RMS value
• Patient leakage current, RMS value
• PRCD time to trip for 30 mA PRCDs
• Current, voltage, frequency, active power, apparent power, power factor
8 reconfigured test sequences for quickly testing simple operating equipment
One universal, adjustable test sequence
One test sequence executed with individual measurements
Enormous data maintenance and storage concept for automated test sequences and measurements for
up to 50,000 data records
Fast access to measurement and test functions with double rotary switch, direct selection keys and softkeys
High-resolution, brilliant 4.3" TFT color display
Unique multiple measurement allows convenient recording of several measuring points
Comprehensive, legally secure preparation of test reports
Modern interfaces: for data entry two USBs in the front panel and for data exchange one USB in the panel
as option, remote control via PC software possible
Standard accessories: Test probe (2 m, not coiled), USB cable, plug-on alligator clip, cable set for voltage
measuring inputs, calibration certificate, condensed operating instructions, ETC report software
Antimicrobial housing (TISECULIFESTBASE only)
Dimensions: 1 ½ module, 375(W) x 200(H) mm
Options:
• TISECUTESTSOCKUK UK socket for electrical safety tester
• Z750A
Z750A 16 A 3-phase current adapter
• Z751A Barcode reader
VITV74
Electrical safety tester
Tests
• AC/DC Hipot
• Insulation resistance
• Ground bond
• Leakage current measurement
4.3" color touch display - easy to use intuitive user interface
5 kV AC/DC Hipot, 20 mA max source current
Ground bond 1-30 A RMS (42 A peak), 100 µΩ resolution
100 nano-Amp leakage current resolution
Test memory stores up to 999 steps and 60 test sequences
Internal self test fully exercises output and verifies current accuracy
150 µs safety shutdown
Standard accessories: HV test leads, GB test leads, operator's
manual CD, traceable calibration certificate
Dimensions: 1 ¼ module, 312.5(W) x 200(H) mm
Options:
• USB1BT USB connection
• VITHVW7 High voltage warning light
• VITQTVPRO7 Test automation software
Test
AC Hipot
DC Hipot
Insulation resistance
Ground bond
Copyright: TEKLAB®
Output range
10-5000 V, 50/60 Hz, max. 20 mA
20-5000 V, max. 10 mA
20-5000 V DC
1-30 Arms, 50/60 Hz
Measurement accuracy
Leakage current: 1.5 % of rdg + 5 µA
Leakage current: 1.5 % + 1 µA
Resistance: 150 kohm – 450 Gohm, best accuracy: 2 %
Resistance: 0-4.5 ohm, best accuracy: ± 1 mohm
65
Test equipment
AMTACH20
Tachometer
Measures rotational and surface speed
Built-in memory
Digital display
Auto power off function
Easy to select units and mode functions
Contact and non-contact measurement
Select rpm using infrared beam or adapter: m/min, m/sec, ft/min,
ft/sec, in/min, m, ft, and in
Measuring range:
• Optical: 1- 99 999 1/min
• Mechanical: 1- 19 999 1/min
Optical sensing distance: max. 600 mm
Accuracy: ± 0.02 % of rdg + 1 digit
Dimensions: 60(W) x 28(D) x 175(H) mm
Includes 6 adapters, carrying case, reflective tapes, batteries and
user manual
FLUKE805
Vibration meter
Four-level scale for indicating severity of problems for overall
vibration and bearing condition
Exportable data via USB
Trending in Microsoft® Excel using built-in templates
Overall vibration measurement (10 Hz to 1,000 Hz) for
acceleration, velocity and displacement units of measurement for
a wide variety of machines
Crest Factor+ technology provides reliable bearing assessment
using direct sensor tip measurements between 4,000 Hz and
20,000 Hz
Colored lighting system (green, red) and on-screen comments
indicate how much pressure needs to be applied to take
measurements
Infrared temperature sensor
On-board memory for 3,500 measurements
Audio output for listening to bearing tones directly
External accelerometer support for hard to reach locations
Flashlight
Dimensions: 71(W) x 58(D) x 241(H) mm
Copyright: TEKLAB®
66
Test equipment
ABICHIP, ABILINEAR
IC-testers
ABICHIP/ABILINEAR is a low-cost, hand-held out-of-circuit IC tester.
ABICHIP is designed for testing digital ICs with up to 40 pins
through a ZIF socket (ABILINEAR for analogue devices).A range of
adapters is also available for SOIC and PLCC devices.
ABICHIP/ABILINEAR includes a search facility for unknown ICs, loop
modes for intermittent failure detection, diagnostic information for
individual pins and self diagnosis for product integrity.
The device is fitted with an RS-232 interface to allow connection
with a computer and use with the optional software ABICLSW.
ABICLSW is a PC based software package that allows users to add
new devices to the library and create functional tests to suit special
applications.
New IC functional tests can be created using PremierLink IC
Programming (PLIP), a high-level descriptive test programming
language optimized for generation of both analogue and digital IC
test programmes.
Simple operation
Extensive built-in library
Comprehensive tests
Unknown device identification
Diagnostic information for individual pins
Conditional loop testing mode
Optional programming facility (ABICLSW
ABICLSW)
ABICLSW
Copyright: TEKLAB®
67
Biomedical test instruments
M695R
Defibrillator analyzer
Used for functional testing of external defibrillators
Delivered energy is measured by a built-in simulated load similar
to the human body (50 ohms)
Test for the refractory period, sensitivity and immunity
Quick selection of the desired waveforms and test data
Biphasic pulsed compatibility
Retrieves information about defibrillation
Analysis for transcutaneous pacemakers
Monophasic and biphasic compatible
Test for shock advisory algorithm
Measuring outgoing energy
Fully AED compatible
LCD display
Power supply: 9 V battery or 220 V AC
Standard accessories: Operating instruction, 2 internal paddle
adapters, 2 9 V batteries, 2 plastic electrode plates
Available as option: test cables and adapters for different
manufacturers’ instruments
M695D
Infusion pump analyzer
Designed to test the flow rates of intravenous infusion pumps to
ensure their correct operation
Easy to Use
Easy to Clean
Simultaneous Operation of Two Chambers
Large Graphics Display with Cursor Selection of Options & Setup
of Parameters
Auto Chamber Recognition
2 Chamber Sizes (3.5 & 35 mL)
Out-of-Sequence Sensing
Battery Display (0 to 100%)
Ranges 0 to 999.9 mL/hr & 0 to 9999 mL/hr
±1% of Reading Flow A ccuracy
Digital Calibration - No Pots to Turn
Replaceable Tubes
Sealed Level Sensors
Programmable End of Test Audio
Programmable Auto or Manual Test Start
Standard accessories: Luer Lock hose set, sealing plug
Available as option: chambers, overflow tubes
Copyright: TEKLAB®
68
Biomedical test instruments
M695W
NIBP simulator
Simulator for testing patient monitors
Includes functions such as NIBP, IBP, ECG, temperature,
arrhythmia, respiration, leak detection and much more
The multi-connect ports make it possible to connect 2 and 4 mm
ECG cables and permit use of ECG cables with pushbutton or clip
Peak pressure detection with simple reset function
Read-out of synchronized invasive blood pressure
Expandable during mobile use by means of flash programming
ECG read-out with complete NSR waveform
Digital pressure envelope offset
±1% deviation from measured pressure value
With multifunctional connection
Small, portable, lightweight
Standard accessories: operating instructions, 9 V battery, external
power pack, soft carrying case, DINAMAP / Critikon adapter, quick
disconnect adapter, Luer adapter, Marquette adapter, Bulb
adapter, calibration certificate
Available as option: test cables and adapters for different
manufacturers’ instruments
M695U
Electrosurgical analyzer
Analysis of complex, multiple-pulse waveforms
Standardized industrial HF measurement
HF leakage current measurement
REM/ARM/CQM test adjustable in 1 Ω steps
Ultra-fast digitizing of HF waveforms
Sampling of up to 16 million data points
Internal precision loads adjustable from 1 to 6400 Ω in 1 Ω steps
Integrated real-time operating system with ¼ VGA color touchscreen
Automated, freely definable test sequences
Automated current-power curves with various power levels per
load value setting
Compatible with external test loads
Definable screen display
USB, RS 232 and Ethernet communication ports
Dedicated connectors for external keyboard and mouse
Automatic or manual activation of the ESU generator during the
load curve test
Remote control of the ESU generator is possible
Generation of test reports
Copyright: TEKLAB®
69
Biomedical test instruments
M688L
Illuminance monitor
Suitable for the performance of measurements at
transilluminated and self-luminous surfaces, for example at
monitor screen workstations and findings screens
Precision luminance measurement
Color corrected silicon photodiode
Storage of up to 100 measured values
Automatic and manual measuring range selection
Luminance units of measure: cd / m2 or fL
CD ROM with software for measured value logging and display, as
well as device control
Interface: USB port
Calibration certificate
GMST
Report generating software
Professional System for the Management of Tests for Electrical
Safety in Accordance with Valid DIN-VDE, EN and IEC Standards
Ideal solution for production facilities, municipal utilities, power
utilities, administrative offices, facility managers, electrical
equipment rental companies, hospitals and other public and
private properties
Suitable for testing the electrical safety of electrical installations,
mobile devices and welding units, as well as for function tests in
the field of medical technology
Individualized test sequences and test reports
Automatic data transfer and data communication
Export of test reports to data files or as print-outs
Report generation and label printing
Simplified navigation, tree structure, test table
Archiving of all information in a database
Communication with several test instruments
e-mail notifications
System requirements: Windows XP SP2 ... 7, 8, 8.1, 10 with .Net 2.0
or newer
Copyright: TEKLAB®
70
Soldering equipment
SSWT1010SET
Soldering station
Power: 90 W
Channels: 1
Temperature range: 100-450 ºC
Temperature accuracy: ± 9 ºC
Temperature stability: ± 2 ºC
Graphical backlit LC-Display
Automatic standby of tool thanks to integrated acceleration
sensor in the tool
Soldering iron:
• 90 W, 24 V with Power Response Heating Technology
• Heat-up time (ca) in seconds (50-350°C): 7
ESD safe
Includes: power unit, soldering iron, safety rest and cleaning
sponge for soldering iron, soldering tip (2.4 mm)
Operating voltage: 230 V, 50/60 Hz
Dimensions: ¾ module, 187.5(W) x 200(H) mm
Options:
• XNTXNT-KIT Soldering tip kit, 5 pcs
• WTAWTA-50 Desoldering tweezers
• SDWTSRJ Tip set for desoldering tweezers, 4 pairs
• SSWTCTRL Fume extractor control option
XNT-KIT
WTA-50
SDWTSRJ
SSWT1012SET
Soldering station
Power: 80 W
Channels: 1
Temperature range: 50-450 ºC
Temperature accuracy: ± 9 ºC
Temperature stability: ± 2 ºC
Graphical backlit LC-Display
Soldering iron:
• 80 W, 24 V
• Heat-up time (ca) in seconds (50-350°C): 10
ESD safe
Includes: power unit, soldering iron, safety rest and cleaning
sponge for soldering iron, soldering tip (2.4 mm)
Operating voltage: 230 V, 50/60 Hz
Dimensions: ¾ module, 187.5(W) x 200(H) mm
Options:
• LTLT-KIT Soldering tip kit, 5 pcs
• WTAWTA-50 Desoldering tweezers
• SDWTSRJ Tip set for desoldering tweezers, 4 pairs
LT-KIT
WTA-50
Copyright: TEKLAB®
SDWTSRJ
71
Soldering equipment
SDWR2002
Soldering / desoldering station
Combo unit with soldering and desoldering functions
Integrated vacuum pump, no need for compressed air
connection
Power: 250 W
Temperature range: 50-450 ºC (soldering and desoldering)
Temperature stability: ± 2 ºC
LCD display
Automatic tool recognition for safe operation with different
soldering tools
2 independent channels for simultaneous operation with
different tools
ESD safe
Sleep mode when unit not used
Includes soldering iron, desoldering iron, stands and cleaning
sponges for soldering tools, cleaning tool series, soldering tip (2.4
mm), 3 pcs desoldering nozzles (1.0/2.3 mm, 1.2/2.5 mm, 1.2/2.5
mm thick)
Dimensions: 1 ¼ module: 312.5(W) x 200(H) mm
Options:
• LTLT-KIT Soldering tip kit, 5 pcs
• SDDXSRJ Desoldering nozzle set, 6 pcs
• WTAWTA-50 Desoldering tweezers
• SDWTSRJ Tip set for desoldering tweezers, 4 pairs
• SDHGPSET Hot air pencil
• SDRSDR-06 Optional tip for hot air pencil
LT-KIT
SDDXSRJ
WTA-50
SDWTSRJ
SDHGPSET
Copyright: TEKLAB®
72
Soldering equipment
ELTOOLSET
Electronics tool set
Professional electronics tool set
30 parts
ESD protected design
Tools included:
• Side cutter - oval head
• Needle nose pliers
• Tip cutter - angled wide head
• Ergonomic precision tweezers with straight, strong tips
• Ergonomic precision tweezers with straight, very pointed
tips for gripping fine wires
• Ergonomic precision tweezers with straight, flat and
rounded tips for simple gripping jobs
• Screwdriver set, precision, ESD, slotted, Phillips, 6 pcs
• Screwdriver set, precision, ESD, hexagon, 6 pcs
• Screwdriver set, precision, ESD, hexagon nut driver, 6 pcs
• Screwdriver set, precision, ESD, TORX, 6 pcs
SOLDERSET
Soldering consumables set
Contents:
• Solder dispenser, 1 roll
• Cleaner flux
• Soldering tip cleaner
• Solder wick, 1.5 mm
• Solder wick, 2.2 mm
• Solder wick, 2.7 mm
• Flux pen
• Flux-gel
• Lead-free solder
• Desoldering pump
SDMICRO
Digital microscope
This high-quality microscope with digital camera and USB
interface is a professional solution for tasks with diverse
magnification requirements. It is designed to be used in quality
control or educational purposes.
The image of the object can be transmitted as a digital photo or
video to a PC via the USB cable and displayed in exceptional detail.
Resolution: 1280 x 1024
Magnification: 20X - 90X
Sensor: 1/3" Color CMOS
Video frame rate: up to 30 Fps
Illumination: 8 build-in Hightech LEDs
ESD safe
Metal stand for microscope, adjustable in all directions
Software features: picture and video capturing (jpg, bmp, avi),
editing and measuring pictures, LED control
Contents: Microscope with digital camera and USB interface,
adjustable work stand and application software
Copyright: TEKLAB®
73
Soldering equipment
VAL8066LED
Magnifying lamp, LED
Magnifying lamp
5” glass lens
3 dioptres
90 pcs LEDs
Table clamp mounting
Adjustable arm: 3 swivels
Colour: white
Operating voltage: 220-240 V AC, 50 Hz
WSK861960
Task light
Task Light is the ideal desk-mounted lamp for precise work.
Together with a large built-in magnifying glass, six LED -bulbs and
independent left/right dimming functionality, this light gives
superb control. It is easy to secure on any work surface of 70 mm
or less, and infinitely adjustable.
6 long-lasting dimmable power LEDs, 3 on each side
Independent left/right dimming (10 settings)
Last-setting memory
Colour rendering index (CRI): 70
Large, 127 mm 3-diopter magnifying glass
Made of anodized aluminium, glass and UV-stable polycarbonate
Adjustable table clamp included for worktops 18-70 mm thick
Mains lead length of 2 meters makes positioning easy
Max light intensity 2800 lux
Optional UK model
• WSK861960GB Task light with UK power plug
Copyright: TEKLAB®
74
Soldering equipment
FT91015699
Fume extractor
Fume extraction unit for 1 workplace
Fine dust pre-filter can be separately changed without having
to change the main filter
Active carbon foam for effective gas filtration
Portable fume extraction unit, for placement under or next to
the bench
Quick and easy filter replacement
Longer service life due to exceptionally large filter surface of
2,4m²
Variable speed setting
Automated filter change notification system
Exceptionally long service life due to maintenance free
brushless EC turbine
Quick, simple and user-friendly installation with Easy-Click
System
ESD safe
Low noise level: max 50 dB(A) at 1 m
Suction capacity: 190 m3/h
Voltage: 220-240 V (50/60 Hz)
Dimensions: 355(W) x 333(D) x 455(H) mm
Includes filter unit, stop valve with bench mounting brackets,
3 m extraction hose (ø 60 mm), 1 m extraction arm (ø 60 mm),
funnel nose
Options:
• FT3411 Additional extractor arm
• 58762858 Gas filter and fine dust filter (10 pcs)
STKIT
Soldering training kit
Suitable for practicing basic and advanced soldering techniques
Includes three different type of soldering training kits
• Soldering training kit “Dice”:16 pcs through-hole components
• Soldering training kit “SMD ruler”, 80 pcs SMD components
• Soldering training kit “Running light”: 30 pcs SMD components
Assembly instructions included in all training kits
Copyright: TEKLAB®
75
CONTACT
Kontram has trusted partners for TEKLAB products all around the world. Please contact us to find your nearest distributor.
Telephone:
+358 9 8866 4500
Postal Address: Kontram Oy, P.O.Box 741, (Tuupakantie 32a), FI-01741 Vantaa, Finland
E-mail:
kontram@kontram.fi
Website
www.kontram.fi/en
Copyright: TEKLAB®
Download PDF

advertising