PRODUCT:
FINISH WAX
PART
NUMBER:
100056
Quart
12 units/case
DESCRIPTION: A durable, long-lasting cream wax that enhances original color depth and brilliance on cured paint
finishes. Ideal as a new car prep or for routine maintenance. Excellent for all types of cured paint
finishes.
APPROVED
FINISHES:
All type paints and curing methods.
All paint coatings are different in their drying and curing characteristics based on their chemistry, drying
mechanism, (air dry vs. bake), and environmental conditions. It is important that proper sanding and buffing
times (based on the type of coating) are followed according to the paint manufacturer’s recommendations.
PREPARATION: Surface must be free of dirt, paint contaminants, oxidation and road film before applying
FINISH WAX. Apply to a cool surface. Do not apply in the sunlight.
APPLICATION: Apply product to a soft, clean cloth or wax applicator. Apply a thin film to the surface. Allow to dry to
a haze. Wipe surface with another soft clean cloth.
FINISH:
Wipe down surface with soft, clean, dry cloth to remover residue and dust.
TECHNICAL
SPECIFICATIONS:






SAFETY &
HANDLING:
Appearance
VOC
Residue clean-up
Water Soluble
Maximum sanding grit
Scent
Light Green creamy liquid
Refer to Section 9 of the Safety Data Sheet
Excellent
Yes
N/A
Solvent
Read all directions and warnings prior to using Evercoat products.
Safety Data Sheets can be found online at www.evercoat.com.
CAUTION:
Keep product from freezing.
NOTES:
Always shake product before using
Inspect repair area for sand marks, in some cases all marks are not removed due to buffing pad
and buffing technique; a second application maybe necessary.
a division of Illinois Tool Works Inc. | 6600 Cornell Road | Cincinnati, OH 45242 | (513) 489-7600
Made and Printed in the U.S. | ©2015 Evercoat
evercoat.com
600-111-100056-TDS
2.2015
Download PDF

advertising