TeamConnect Ceiling Ceiling microphone conference

SYSTEM SPECIFICATION
1/9
TeamConnect Ceiling
Ceiling microphone conference system
FEATURES
• Allows the person speaking to move around freely
anywhere in the room during conferences and
presentations
• Integrative Freedom: Virtually invisible integration thanks
to unobtrusive design and inconspicuous installation
variants
• Connectivity & Compatibility: The conferencing system
for Unified Communications following the BYOD (BringYour-Own-Device) philosophy
• Excellently microphone directivity thanks to state-ofthe-art beam-forming technology, realized in proven
Sennheiser quality
• Very low configuration and maintenance effort
The new conference system TeamConnect Ceiling blends
into any conference room infrastructure. Thanks to three
optional installation variations, the ceiling microphone
can be installed in or on any ceiling while the central unit
is hidden away in the cabinet and the loudspeakers are
mounted freely in the room. Because of this, the tables
remain free from cables and there are no requirements of
a fixed table positioning. The ceiling microphone covers up
to 60 m². For larger groups the system can be easily expanded with additional ceiling mics. After initial installation,
the system requires little to no additional maintenance.
DELIVERY INCLUDES
• SL Ceiling Mic ceiling microphone
• TeamConnect System (EU, UK or US) with Central Unit
and Combox
• 2x SL Loudspeaker 52 A W active conference
loudspeaker
• Power supply unit with EU, UK or US power supply cord
• Cable set (audio, power and control cable, 10 m each,
plenum-rated)
• Ceiling suspension kit
• US 2 ft adaptor set
• Mounting instructions
PRODUCT VARIANTS
ACCESSORIES
TeamConnect Ceiling EU
Art. no. 506975
TeamConnect Ceiling UK
Art. no. 506976
TeamConnect Ceiling US
Art. no. 506977
SL CM FB
Ceiling fixation bracket
Art. no. 506846
SYSTEM SPECIFICATION
2/9
TeamConnect Ceiling
Ceiling microphone conference system
SPECIFICATIONS
SL Ceiling Mic
SL TeamConnect CU1
Dimensions (L x W x H)
590 x 590 x 43 mm
(23.2" x 23.2" x 1.7")
Dimensions (W x H x D)
432 x 191 x 51 mm
(17" x 7.5" x 2")
Weight
6 kg (13.2 lbs)
Weight
2.25 kg (4.5 lbs.)
AUDIO I and AUDIO II
sockets
2 x 3-pin terminals
(fits Phoenix Contact MCVW
1.5-3-ST-3.81)
MIC / LINE inputs 1-8
Impedance
10 kΩ balanced
POWER socket
4-pin terminal
(fits Phoenix Contact MCVW
1.5-3-ST-3.81)
Maximum level
-65 dBu to +17 dBu
Phantom power
24 V DC at 10 mA
LINE inputs 1-2
Impedance
10 kΩ balanced
Maximum level
17 dBu
50 Ω
CONTROL socket
6-pin terminal
(fits Phoenix Contact MCVW
1.5-3-ST-3.81)
Supply voltage
20 – 28 V DC
LINE OUT outputs 1-8
Impedance
Power consumption
20 W
Nominal level
0 dBu
Temperature
Operation: 0 – 40 °C
(32 – 104 °F)
Storage: -10 – 60 °C
(14 – 140 °F)
Maximum level
17 dBu
SL TeamConnect CB1
Relative humidity
20 – 95 %, non-condensing
Dimensions (W x H x D)
Microphone type
pre-polarized condenser
microphone
119 x 143 x 44 mm
(4.7" x 5.6" x 1.7")
Weight
1.51 lbs. (0.75 kg)
Sensitivity
-1 dBV/Pa (930 mV/Pa)
Frequency response
40 to 3,300 Hz THD
Equivalent noise level
20 dB(A)
Noise
Number of KE 10-237
microphone capsules
29
< 0.04 % re-max level
with 0 dB gain at 1 kHz
Dynamic range
> 84 dB (non A-weighted)
Pick-up pattern
Beam pattern
Max. sound pressure
level
119 dB SPL
Dynamic range
99 dB(A)
SL Loudspeaker 52 A W
Dimensions (L x W x H)
240 x 140 x 161 mm
(9.5" x 5.5" x 6.3")
Weight
3.1 kg (6.8 lbs)
Frequency response ± 3 dB
53 - 30,000 Hz
Max. SPL at 1 m (150 - 5,000)
Hz
97 dB SPL
THD at 90 dB SPL at 1 m >
200 Hz
<1%
Input impedance
balanced > 10 kΩ
unbalanced > 10 kΩ
Power consumption (standby)
230 V AC; 0.47 W /
110 V AC; 0.34 W
Power consumption (idle)
230 V AC; 4.75 W /
110 V AC; 4.53 W
Power consumption (max)
230 V AC; 95 W /
110 V AC; 91 W
Mounting points
2 x M6 on rear panel
with depth 10mm
SYSTEM SPECIFICATION
3/9
TeamConnect Ceiling
Ceiling microphone conference system
ARCHITECT‘S SPECIFICATION
A complete professional ceiling microphone conference system for fixed installation in medium to large conference
rooms where table microphones are not desirable or possible, comprised of a central unit, a combox, a ceiling microphone and two active loudspeakers. The ceiling microphone shall fit within the space of a standard 600 mm (2 ft.) ceiling
panel and shall be mountable either onto or flush with the ceiling itself.
The ceiling microphone shall consist of 29 Sennheiser KE 10-237 pre-polarized condenser microphone capsules and shall
use beamforming technology that automatically focuses on whoever is speaking in the room. The microphone shall be
supplied complete with a ceiling suspension kit for ceiling installation, an external power supply unit with 3 country-specific mains cables, a power cable for connection to the external power supply unit, an audio cable for connection to the
central unit, and a control cable for connection to the SL TeamConnect CB1. The microphone shall have a 4-pin terminal
socket for connecting the power cable, two 3-pin terminal sockets for connecting the audio cable and a 6-pin terminal
socket for connecting the control cable.
In addition, the microphone shall feature the following sockets, buttons and LEDs located behind a service hatch: an RJ45 network socket for connecting a computer for configuration purposes, a SET LED that flashes when the microphone
is ready for operation, an IP button for switching between a static IP (192.168.1.10) and the microphone’s integrated DHCP
server, an IP LED that lights up for static IP and flashes for DHCP IP addressing, a Reset button for performing a restart
of the microphone, and a Reset LED that lights up when mains voltage is present. The microphone sensitivity shall be -1
dBV/Pa (930 mV/Pa). The maximum sound pressure level shall be 119 dB SPL, equivalent noise level shall be 20 dB(A).
The dynamic range shall be 99 dB(A). Operating voltage shall range from 20 to 28 V DC. The power consumption shall be
20 W. The microphone shall be compatible with the SL Ceiling Mic Configuration Manager software for easy configuration.
The microphone shall be the Sennheiser SL Ceiling Mic.
The central unit shall be an automatic mixer for professional quality audio in multiple microphone web and teleconferencing applications. It shall provide advanced mixing capabilities and configuration options. All devices used in the system
shall be connected, directly or indirectly, to the central unit. The central unit shall be equipped with a TELCO telephone
interface. An Ethernet port shall be provided for network connections. The central unit shall feature an RS-232 control
port for connecting a third party media control system (Creston, AMX, etc.). The central unit shall have a USB 2.0 port for
connecting a PC for configuration purposes and shall also be configurable via the RS-232 port or the network (Ethernet
port). The required “Configuration Manager“ PC software for configuring the central unit and all other components shall
be supplied. The central unit shall feature eight mic/line inputs (each with 24V switchable phantom power), two additional line inputs and eight audio outputs for connecting e.g. active loudspeakers. The central unit shall support mono
and stereo acoustic echo cancellation, i.e. one or two out of the eight outputs shall be selectable as the acoustic echo
cancellation reference. The connection between the central unit and the combox shall be made by means of a standard
CAT5 cable.
The central unit shall be the Sennheiser SL TeamConnect CU1.
The combox shall be “plug and play” (no drivers required) and shall be the system’s audio interface, allowing the system
to be used as an audio extension. The combox shall be used to process computer audio as well as headset or enterprise
telephone audio in the system. The USB 2.0 port of the combox shall allow the connection of a PC. Via the combox, the
system shall be capable of playing back all audio from the PC (e.g. web conferences, any audio and video content) as well
as picking up and processing the audio in the meeting room and feeding it back to the PC. In addition, any device with
a 4-pin 3.5 mm jack socket (e.g. a mobile phone or tablet PC) shall be connectable to the combox’s headset socket via a
4-pin special cable, thus allowing audio from the mobile device to be processed in the system. The combox shall be the
Sennheiser SL TeamConnect CB1. The loudspeaker shall be active and optimized for speech intelligibility. Its high, medium and low frequency levels shall be adjustable in order to obtain optimum sound quality depending on the mounting
position of the speaker and the room characteristics. The loudspeaker shall have 2 power modes: on and auto standby.
The loudspeaker‘s high pass filter shall be adjustable to 50 Hz, 70 Hz or 100 Hz. The input sensitivity shall be selectable
between -6 dBu, 0 dBu or +10 dBu. The loudspeaker shall come complete with a wall mounting kit and, when wall mounted with the supplied spacers, shall be pivotable by 180° and tiltable. Up to eight loudspeakers shall be connectable to the
central unit.
The loudspeaker shall be the Sennheiser SL Loudspeaker 52 A W.
Dimensions shall be as follows: central unit: 432 x 191 x 51 mm (17“ x 7.5“ x 2“); combox: 119 x 143 x 44 mm (4.7“ x 5.6“ x
1.7“); loudspeaker: 240 x 140 x 161 mm (9.45“ x 5.51“ x 6.34“); ceiling microphone: 590 x 590 x 43 mm (23.2“ x 23.2“ x 1.7“).
Approximate weights shall be as follows: central unit: 2.25 kg (4.5 lbs.); combox: 0.75 kg (1.51 lbs.); loudspeaker: 3.1 kg
(6.83 lbs.); ceiling microphone: 6 kg (13.2 lbs).
The ceiling microphone conference system shall be the Sennheiser TeamConnect Ceiling.
SYSTEM SPECIFICATION
4/9
TeamConnect Ceiling
Ceiling microphone conference system
DIMENSIONS
590 mm
23.2"
SL Ceiling Mic
590 mm
23.2"
43 mm
1.7"
PIN ALLOCATION
123456
1234
123 123
CONTROL
POWER
AUDIO OUT
1
+24 V
1
+24 V
1
Audio +
2
COM
2
+24 V
2
Audio -
3
On status
3
Ground
3
Ground
4
Hook status
4
Ground
5
Mute status
6
Ground
SYSTEM SPECIFICATION
5/9
TeamConnect Ceiling
Ceiling microphone conference system
DIMENSIONS
SL CM FB
500
420
A
±0.2
±0.2
6.
6
B
B
43
0
420
±0.2
500
±0.2
t=1,5
A
2
±0.1
180
±0.1
( 10
±0.1
)
SYSTEM SPECIFICATION
6/9
TeamConnect Ceiling
Ceiling microphone conference system
DIMENSIONS
US 2ft adaptor set
580
t=1,2
3.4
R
1
3
15
R5
R
3.4
45
3.4
45
90
alle Flächen: Neben-Sichtfläche N-S2 nach SNP 10,
pulverbeschichtet, Verkehrsweiß, glatt matt, nach RAL 9016
all surfaces: minor viewing areas N-S2 as per SNP 10
powder-coated, traffic white, flat matt, as per RAL 9016
A
±0.2
2
90
90
( 1.2 )
12
5.5
16
5
5.5
5
16
( 45.7 )
42.5
1
( 31.5 )
5
R
R
A
131
16
16
11.3
131
16
A-A
±0.15
1
5.5
1
23.8
262
±0.15
( 25 )
262
SYSTEM SPECIFICATION
TeamConnect Ceiling
Ceiling microphone conference system
DIMENSIONS
SL TeamConnect CU1
7/9
SYSTEM SPECIFICATION
TeamConnect Ceiling
Ceiling microphone conference system
DIMENSIONS
SL TeamConnect CB1
8/9
SYSTEM SPECIFICATION
TeamConnect Ceiling
Ceiling microphone conference system
DIMENSIONS
SL Loudspeaker 52 A W
9/9
Download PDF

advertising