Aviator Design Spy Watch Hidden Camera (MEQC8014)

Aviator Design Spy Watch
Hidden Camera
(MEQC8014)
2
6
3
5
1
4
1. On /Off, Video
2. Photo, Audio
3. USB & Changing connection
4. Camera lens
5. Indicator light
6. Microphone
Operation
To switch on:
Long press button for 2 seconds and release, red and blue lights will turn on and change to
steady blue light. Device is in Standby mode now.
Standby mode:
In standby mode, blue light, it does not flash.
To take a video:
In standby mode, press button 1 and release. Blue light flashes three times then it will turn
off, video recording starts (covert recording)
To stop recording, press button 1 and release, blue light starts flashing, press button 1
again. Device will save the current video file and return to Standby mode. Blue light stays
on (steady blue).
Note:
a. If you don’t press button 1 again when blue light starts flashing, the LED will shut off
after the flashing (3 times) and the device will save the current video file and starts a new
video recording automatically (covert recording)
b. Video recording is covert, so during recording the LED is on shut off status.
To take a photo:
In Standby mode, press button 2 and release, red light flashes once then it changes to blue
light, photo is taken and device returns to Standby mode.
To make a Voice recording:
In standby mode, long press button 2 for two seconds and release, red light flashes four
times then off, voice recording starts (covert recording)
To stop recording, press button 2 and release, red light starts flashing, press button 2 again.
Device will save the current audio file and return to Standby mode. Blue light stays on
(steady blue)
Note:
c. If you don’t press button 2 again when red starts flashing, the LED will shut off after the
flashing (three times) and the device will save the current audio file and starts a new voice
recording automatically (covert recording).
d.) Voice recording is covert, so during recording the LED is on shut off status.
To switch off:
Press button 1 for 2 seconds and release, red light will quickly flash 6 times and then device
powers off.
Remarks:
To reset, press button 1 & 2 at the same time, LED light turns off. Press reset when player
crashes or jammed.
To view the files:
Locate the USB cable that was provided in the packaging. Twist off the middle knob,
(button 3) on the left side of the watch and plug the auxiliary end of the cable into the hole
on the video watch, then plug the other end of the USB cable to your computer. (The
opposite operation sequence could cause files lost or watch damage). When red lights on, it
shows the connection is successful. Your computer will install the necessary drivers
automatically. View the photos or videos on the computer.
Webcam:
Connect the watch to PC, when the window of removable disk pop up, press button 2to
switch to the PC cam.
To change the time and date:
Changing the time and date displayed on the recorded files.
1. To change the time and date on your video watch, connect it to your computer.
2. A window will pop up once you have inserted the USB into the computer. Click “Open
folder to view files”.
3. Create a new text document, right click in the folder. Left click “New” and then left click
“Text Document”, name the document “Time”.
4. Type in the date and time. The format of the time must be set in “YYYY.MM.DD HH:MM:SS
using Military time.
5. Go to “File”, save the document and safely remove the video watch from your computer.
6. Turn on the video watch, press and hold the Start/Stop button for 2 seconds to initiate
the reset. (You can also check if it works by the time watermark on the new recording
video.)
Note: In different computer, the display maybe a bit different. You can double and open
“My Computer” on desktop, open “Removable Disk” and create the time as mentioned
above.
Option: A second way to update the time and time is to run the program “Time.exe” or
“WriteTime.exe” that is stored inside the watch memory.
Changing the Time on the face of the video watch:
1. Locate the “Time Adjust Knob” in the middle of the right side of the video watch.
2. Gently pull the knob out. The hands on the watch’s face will stop moving.
3. Turn the knob to adjust the time.
4. Push the knob back in and the hands on the watch will begin to move.