DHT82EIN Dryer User Manual Asciugatrice Manuale utente - S-bol

DHT82EIN
Dryer
User Manual
Asciugatrice
Manuale utente
2960311121_EN/270515.1547
Please read this user manual first!
Dear Customer,
Thank you for prefering a Smeg product. We hope that your product which has been manufactured with high quality
and technology will give you the best results. We advise you to read through this manual and the other accompanying
documentation carefully before using your product and keep it for future reference. If you transfer the product to
someone else, give its manual as well. Pay attention to all details and warnings specified in the user manual and
follow the instructions given therein.
Use this user manual for the model indicated on the cover page.
Explanation of symbols
Throughout this user manual the following symbols are used:
C
A
B
Important information or useful hints about
usage.
Warning for hazardous situations with
regard to life and property.
Warning against electric shock.
Warning against hot surfaces.
Warning against fire hazard.
Packaging materials of the product are
manufactured from recyclable materials in
accordance with our National Environment
Regulations.
Do not dispose of the packaging wastes with the domestic waste or other wastes, discard them to the dedicated
collection points designated by the local authorities.
1 Important instructions for safety and environment
This section contains safety instructions that will help protect from risk of
personal injury or property damage. Failure to follow these instructions shall
void any warranty.
1.1 General safety
•The dryer can be used by children at and above 8 years old and by
persons whose physical, sensory or mental capabilities were not fully
developed or who lack experience and knowledge provided that they
are supervised or trained on the safe usage of the product and the risks
it brings out. Children should not play with the product. Cleaning and
maintenance works should not be performed by children unless they are
supervised by someone.
•Children of less than 3 years should be kept away unless continously
supervised.
•Adjustable feet should not be removed. The gap between the dryer and
the floor should not be reduced with materials such as carpet, wood and
tape. This will cause problems with the dryer.
•Always have the installation and repairing procedures carried out by the
Authorized Service. Manufacturer shall not be held liable for damages
that may arise from procedures carried out by unauthorized persons.
•Never wash the dryer by spraying or pouring water onto it! There is the
risk of electric shock!
Dryer / User Manual
3 / 56 EN
Important instructions for safety and environment
1.1.1 Electrical safety
Electrical safety instructions should be followed while electrical
connection is made during the installation.
A
•Connect the dryer to a grounded outlet protected by a fuse at the value
specified on the type label. Have the grounding installation performed by
a qualified electrician. Our company shall not be liable for any damages
that will arise when the dryer is used without grounding in accordance
with the local regulations.
•The voltage and allowed fuse protection is stated on the type label plate.
•The voltage specified on the type label must be equal to your mains
voltage.
•Unplug the dryer when it is not in use.
•Unplug the dryer from the mains during installation, maintenance,
cleaning and repair works.
•Do not touch the plug with wet hands! Never unplug by pulling on the
cable, always pull out by grabbing the plug.
•Do not use extension cords, multi-plugs or adaptors to connect the dryer
to power supply in order to decrease the risk of fire and electric shock.
•Power cable plug must be easily accessible after installation.
B
B
4 / 56 EN
Damaged mains cable should be changed notifying the Authorized
Service.
If the dryer is faulty, it must not be operated unless it is repaired
by an authorized service agent! There is the risk of electric shock!
Dryer / User Manual
Important instructions for safety and environment
1.1.2 Product safety
Points to be taken into consideration for fire hazard:
Below specified laundry or items must not be dried
in the dryer considering fire hazard.
•Unwashed laundry items
•Items soiled with oil, acetone, alcohol, fuel oil, kerosene, stain
removers, turpentine, paraffin or paraffin removers must be
washed in hot water with plenty of detergent before being dried
in the dryer.
For this reason especially the items containing the above
specified
stains must be washed very well, to do this
use adequate detergent and choose a high washing
temperature.
Below specified laundry or items must not be dried in the
dryer due to the fire hazard:
•Garments or pillows bolstered with rubber foam (latex foam),
shower bonnets, water resistant textiles, materials with rubber
reinforcement and rubber foam pads.
•Clothing cleaned with industrial chemicals.
Items such as lighter, match, coins, metal parts, needle etc.
may damage the drum set or may lead to functional problems.
Therefore check all the laundry that you will load into your dryer.
Never stop your dryer before
the programme completes. If you must do this, remove all
laundry
quickly and lay them out to dissipate the heat.
Clothes that are washed inadequately may ignite on their own
and even may ignite after drying ends.
Dryer / User Manual
5 / 56 EN
Important instructions for safety and environment
•You must provide enough ventilation in order to prevent gases exiting
from devices operating with other types of fuels including the naked flame
from accumulating in the room due to the back fire effect.
Underwear that contains metal reinforcements should not be
dried
in the dryer. Dryer may be damaged if metal reinforcements come
loose and break off during drying.
Use softeners and similar products in accordance with the
instructions of their manufacturers.
Always clean the lint filter before or after each loading. Never
operate the dryer without the lint filter installed.
A
C
C
•Never attempt to repair the dryer by yourself. Do not perform any repair
or replacement procedures on the product even if you know or have the
ability to perform the required procedure unless it is clearly suggested in
the operating instructions or the published service manual. Otherwise,
you will be putting your life and others’ lives in danger.
•There must not be a lockable, sliding or hinged door that may block
the opening of the loading door in the place where your dryer is to be
installed.
•Install your dryer at places suitable for home use. (Bathroom, closed
balcony, garage etc.)
•Make sure that pets do not enter the dryer. Check the inside of the dryer
before operating it.
•Do not lean on the loading door of your dryer when it is open, otherwise it
may fall over.
•The lint must not be allowed to accumulate around the tumble dryer
6 / 56 EN
Dryer / User Manual
Important instructions for safety and environment
1.2 Mounting over a washing machine
•A fixing device should be used between the two machines when installing
the dryer above a washing machine. The fitting device must be installed
by the authorized service agent.
•Total weight of the washing machine and the dryer -with full load- when
they are placed on top of each other reaches to approx. 180 kilograms.
Place the products on a solid floor that has sufficient load carrying
capacity!
A
Washing machine cannot be placed on the dryer. Pay attention
to the above warnings during the installation on your washing
machine.
Installation Table for Washing Machine and Dryer
Washing Machine Depth
Dryer Depth
62cm
60 cm
54 cm
50 cm
49 cm
45 cm
54 cm
Can be
installed
Can be
installed
Can be
installed
Can be
installed
Can be
installed
Can be Cannot be
installed installed
60 cm
Can be
installed
Can be
installed
Can be
installed
Can be
installed
Can be Cannot be Cannot be
installed installed installed
Dryer / User Manual
40 cm
7 / 56 EN
Important instructions for safety and environment
1.3 Intended use
•Dryer has been designed for domestic use. It is not suitable for
commercial use and it must not be used out of its intended use.
•Use the dryer only for drying laundry that are marked accordingly.
•The manufacturer waives any responsibility arisen from incorrect usage or
transportation.
•The service life of the dryer that you purchased is 10 years. During this
period, original spare parts will be available to operate the dryer properly.
1.4 Child safety
•Packaging materials are dangerous for the children. Keep packaging
materials away from children.
•Electrical products are dangerous for the children. Keep children away
from the product when it is operating. Do not let them tamper with the
dryer. Use the child-proof lock in order to prevent the children to tamper
with the dryer.
C
Child-proof lock is on the control panel. (See Child lock)
•Keep loading door closed even when the dryer is not in use.
8 / 56 EN
Dryer / User Manual
Important instructions for safety and environment
1.5 Compliance with the WEEE regulation
and disposing of the waste product
This product complies with EU WEEE Directive (2012/19/EU). This
product bears a classification symbol for waste electrical and
electronic equipment (WEEE).
This product has been manufactured with high quality parts and
materials which can be reused and are suitable for recycling. Do
not dispose of the waste product with normal domestic and other
wastes at the end of its service life. Take it to the collection center for the
recycling of electrical and electronic equipment. Please consult your local
authorities to learn about these collection centers.
1.6 Compliance with RoHS Directive:
The product you have purchased complies with EU RoHS Directive
(2011/65/EU). It does not contain harmful and prohibited materials
specified in the Directive.
1.7 Package information
Packaging materials of the product are manufactured from recyclable
materials in accordance with our National Environment Regulations. Do
not dispose of the packaging materials together with the domestic or other
wastes. Take them to the packaging material collection points designated
by the local authorities.
Please visit the following website to get more information on the product.
http://www.smeg.com
Dryer / User Manual
9 / 56 EN
Important instructions for safety and environment
1.8 Technical Specifications
EN
Height (Min. / Max.)
Width
Depth
Capacity (max.)
Net weight (plastic front door usage)
Net weight (glass front door usage)
Voltage
Rated power input
Model code
84,6 cm / 86,6 cm*
59,5 cm
60,9 cm
8 kg**
49 kg
51 kg
See type label***
* Min. height: Height with adjustable feet are closed.
Max. height: Height with adjustable feet are opened maximum.
** Dry laundry weight before washing.
*** Type label is located behind the loading door.
C
C
C
Technical specifications of the dryer are subject to specification
without notice to improve the quality of the product.
Figures in this manual are schematic and may not match the
product exactly.
Values stated on markers on the dryer or in the other published
documentation accompanying with the dryer are obtained in
laboratory in accordance with the relevant standards. Depending
on operational and environmental conditions of the dryer, these
values may vary.
10 / 56 EN
Dryer / User Manual
2 Your Dryer
2.1 Package Contents
1
2
3
4
5
1. Water drain hose *
2. Filter drawer spare sponge*
3. User Manual
4. Drying basket*
5. Drying basket user manual*
*It can be supplied with your machine depending on its model.
Dryer / User Manual
11 / 56 EN
3 Installation
Before the calling the nearest Authorized Service for the
installation of the dryer, ensure that electrical installation
and water drain is appropriate referring to the user's
manual.(See 3.3 Connecting to the drain and 3.5
Electrical connection) If they are not suitable, contact
a qualified electrician and technician to make necessary
arrangements.
C
A
A
Preparation of the dryer's location
as well as the electrical and waste
water installations is under customer's
responsibility.
Prior to installation, visually check if the
dryer has any defects on it. If the drier
is damaged, do not have it installed.
Damaged products cause risks for your
safety.
B
Do not place the dryer on the power
cable.
3.2 Removing the transportation
safety assembly
A
•
•
•
Remove the transportation safety
assembly before using the dryer for the
first time.
Open the loading door.
There is a nylon bag inside the drum that contains
a piece of styrofoam. Hold it from its section
marked with XX XX.
Pull the nylon towards yourself and remove the
transportation safety assembly.
Let your dryer wait for 12 hours before
starting to use it.
3.1 Appropriate installation location
Install the dryer on a stable and level surface.
Dryer is heavy. Do not move it by yourself.
• Operate your dryer in a well ventilated, dust-free
environment.
• The gap between the dryer and the surface should
not be reduced by the materials such as carpet,
wood and tape.
• Do not cover the ventilation grills of the dryer.
• There must not be a lockable, sliding or hinged
door that may block the opening of the loading
door in the place where your dryer is to be
installed.
• Once the dryer is installed, it should stay at the
same place where its connections have been
made. When installing the dryer, make sure that
its rear wall does not touch anywhere (tap, socket,
etc.).
• Place the dryer at least 1 cm away from the edges
of other furniture.
• Your dryer can be operated at temperatures
between +5°C and +35°C. If the operating
conditions fall outside of this range, operation of
the dryer will be adversely affected and it can get
damaged.
• The rear surface of the tumble dryer shall be
placed against a wall.
12 / 56 EN
A
Check that no part of the transportation
safety assembly remains inside the drum.
3.3 Connecting to the drain
In products equipped with condenser unit, water
accumulates in the water tank during the drying cycle.
You should drain accumulated water after each drying
cycle.
You can directly drain accumulated water through the
water drain hose supplied with the product instead of
periodically draining the water collected in the water
tank.
Connecting the water drain hose
1-2 Pull hose at the behind of the dryer by hand in
order to disconnect it from where it is connected.
Do not use any tools to remove the hose.
3 Connect one end of the drain hose supplied with
the dryer to the connection point from where you
removed the hose of the product in previous step.
4 Connect the other end of the drain hose directly to
the wastewater drain or to the washbasin.
Dryer / User Manual
Installation
1
2
A
3
A
C
C
4
We recommend carrying the dryer in
upright position. If it is not possible to
carry the machine in the upright position,
we recommend carrying it by tilting
towards the right side when looked from
the front.
3.7 Warnings about sounds
C
It is normal to hear a metallic noise
from the compressor sometimes during
operation.
C
Water collected during operation is
pumped to water tank. It is normal to hear
pumping noise during this process.
Hose connection should be made in a
safe manner. Your drain house will be
flooded if the hose comes out of its
housing during water discharge.
Water drain hose should be attached to a
height of maximum 80 cm.
Make sure that the water drain hose
is not stepped on and it is not folded
between the drain and the machine.
3.4 Adjusting the feet
•
•
In order to ensure that the dryer operates more
silently and vibration-free, it must stand level and
balanced on its feet. Balance the machine by
adjusting the feet.
Turn the feet to left or right until the dryer stands
level and firmly.
C
Never unscrew the adjustable feet from
their housings.
3.5 Electrical connection
For specific instructions for electrical connection
required during installation (see 1.1.1 Electrical
Safety)
3.6 Transportation of the dryer
Unplug the dryer before transporting it.
Drain all water that has remained in the dryer.
If direct water drain connection is made, then remove
the hose connections.
Dryer / User Manual
3.8 Changing the illumination lamp
In case an illumination lamp is used in your laundry
dryer
To change the Bulb/LED used for illumination of your
tumble dryer, call your Authorized Service.
The lamp(s) used in this appliance is not suitable for
household room illumination. The intended purpose of
this lamp is to assist the user to place laundry in the
tumble dryer in a comfortable way.
13 / 56 EN
4 Preparation
4.1 Laundry suitable for drying in the dryer
Always obey the instructions given on the garment tags. Dry only the laundry having a label stating that they are
suitable for drying in a dryer and make sure that you select the appropriate programme.
LAUNDRY DRYING SYMBOLS
Do not dry
Do not dryclean
Dry-cleanable
Lay in shadow
to dry
Lay to dry
Hang to dry
Do not dry
with dryer
Hang wet to dry
Sensitive /
Delicate dry
Without heating
At low temperature
No Iron
At medium
temperature
At high temperature
Drying
Settings
Suitable for
dryer
At any temperature
Drying
Symbols
Iron at high
temperature
Iron at medium
temperature
200 0C
150 0C
IRON
Maximum temperature
4.2 Laundry not suitable for drying in
the dryer
C
Delicate embroidered fabrics, woollen, silk
garments, delicate and valuable fabrics,
airtight items and tulle curtains are not
suitable for machine drying.
4.3 Preparing laundry for drying
•
•
•
Laundry may be tangled with each other after
washing. Separate the laundry items before
placing them into the dryer.
Dry garments having metal accessories such as
zippers, inside out.
Fasten the zippers, hooks and buckles and button
sheets.
14 / 56 EN
Iron at low
temperature
110 0C
Iron without
steam
Dry or Steam
Do not iron
Iron -
4.4 Things to be done for energy
saving
Following information will help you use the dryer in an
ecological and energy-efficient manner.
• Spin your laundry at the highest speed possible
when washing them. Thus, the drying time is
shortened and energy consumption is reduced.
• Sort out the laundry depending on their type and
thickness. Dry the same type of laundry together.
For example thin kitchen towels and table clothes
dries earlier than thick bathroom towels.
• Follow the instructions in the user manual for
programme selection.
• Do not open the loading door of the machine
during drying unless necessary. If you must
certainly open the loading door, do not to keep it
open for a long time.
• Do not add wet laundry while the dryer is in
operation
• Clean the lint filter before or after each drying
cycle. (See 6. Maintenance and cleaning)
Dryer / User Manual
Preparation
•
•
Clean the filter drawer regularly either when the
Filter Drawer Cleaning warning symbol appears or
after every 5 drying cycles. (See 6. Maintenance
and cleaning)
Ventilate the room, where the dryer is located, well
during drying.
4.5 Correct load capacity
Follow the instructions in the “Programme selection and
consumption table”. Do not load more than the capacity
values stated in the table.
C
It is not recommended to load the dryer
with laundry exceeding the level indicated
in the figure. Drying performance will
degrade when the machine is overloaded.
Furthermore, dryer and the laundry can get
damaged.
Dryer / User Manual
Following weights are given as examples.
Cotton quit covers (double)
Cotton quit covers (single)
Bed sheets (double)
Bed sheets (single)
Large tablecloths
Approximate weights
(g)*
1500
1000
500
350
700
Small tablecloths
Tea napkins
Bath towels
Hand towels
Blouses
Cotton shirts
Shirts
Cotton dresses
Dresses
Jeans
Handkerchiefs (10 pieces)
T-Shirts
250
100
700
350
150
300
250
500
350
700
100
125
Laundry
*Dry laundry weight before washing.
15 / 56 EN
5 Operating the product
5.1 Control panel
1
2
6
1.
2.
3.
4.
5.
6.
3
5
4
Programme selection knob
Remaining duration indicator
On/Off button
Start/pause button
End duration button
Sound warning button
5.2 Screen symbols
16 / 56 EN
Iron dry
Cupboard
dry
Filter
cleaning
Buzzer
Anticreasing
Tank full
Child-proof
lock
Start
pause
Timer Delay
Drying
Dryer / User Manual
Operating the product
5.3 Preparing the machine
1.
2.
3.
4.
Plug in the machine
Place laundry inside the machine.
Press the On/Off button.
When your machine turns on for the first time,
it turns on with the declaration (cotton cabinet
dryness) programme.
C
Pressing the On/Off button doesn‘t mean
the programme starts.
Press the Start / Pause button to start the
programme.
5.5 Main programmes
The main programmes are given below based on fabric
type.
• Cotton
Dry durable laundry with this programme. It dries in
normal temperature. Recommended for use with your
cotton laundry (sheets, bed covers, towels, bathrobes
etc.)
• Synthetic
Dry laundry that is not very durable with this
programme. Recommended for use with your synthetic
laundry.
5.4 Programme selection
1.
2.
Determine the appropriate programme from the
chart below containing the drying levels.
Select the programme you desire using the
Programme Selection knob.
Extra Dry
Only cotton laundry is dried in
normal temperature.
Thick and multi-layered laundry
(towels, sheets, jeans etc.) are dried
so that they can be placed into
wardrobe without ironing.
Cupboard dry
Normal laundry (tablecloths,
underwear etc.) are dried so that
they can be placed into wardrobe
without ironing.
5.6 Extra programmes
The following extra programmes are available in the
machine for special conditions.
C
C
Extra programmes may vary according to
the specifications of your machine.
In order to receive better results from
drying machine programmes, your
laundry should be washed with the
appropriate programme in your washing
machine and wringed with recommended
wringing revolution..
• Jeans
Cupboard
dry +
Iron Dry
C
Normal laundry (Ex: tablecloths,
underwear) are again dried so
that they can be placed into the
wardrobe but more so than the
wardrobe dryness option.
Normal laundry (shirts, dresses etc)
are dried ready for ironing.
For detailed programme information see.
„Programme selection and consumption
table“..
Dryer / User Manual
Use to dry jeans that are wringed with high rpm in
washing machine.
• Sport
Use to dry laundry made from synthetic, cotton or mixed
fabrics.
• Express
You can use this programme to dry cotton laundry that
you had wringed in high rpm in your washing machine.
It dries 1 kg of your Cotton laundry (3 shirts / 3 T-shirts)
in 45 minutes.
• Daily
Programme for daily drying of cotton and synthetic
laundry and lasts 90 minutes.
• Shirts
Dries shirts more delicately and thus causes less
wrinkles for easy ironing.
• Baby
Programme used for baby clothing with can be dried
approval on the label.
17 / 56 EN
Operating the product
C
Very little dampness might remain on
the shirts after the programme. It is
recommended that you do not leave the
shirts in the drying machine.
• Delicates
You can dry your delicates suitable for drying or laundry
that is recommended to hand wash (silk blouses, thin
underwear etc.) in low temperature.
C
It is recommended to dry your delicates
in laundry bag to prevent wrinkles and
damage. When the programme ends,
take your laundry out of the machine
immediately and hang them to prevent
wrinkles.
• Freshen Up
It only performs ventilation for 10 minutes without
blowing hot air. You can ventilate the cotton and linen
clothing that has remained closed for a long duration
and remove their odor.
• Timed programmes
You can select the 30 mins and 45 mins time
programmes to achieve the desired final drying level
with low temperature.
C
18 / 56 EN
On this programme, the machine dries as
long as the set duration, regardless of the
drying level.
Dryer / User Manual
Operating the product
5.7 Programme selection and consumption table
EN
Programmes
Capacity (kg)
Spin speed in
Approximate amount of
washing machine
Drying time (minutes)
remaining humidity
(rpm)
Cottons / Coloreds
A Extra dry
8
1000
% 60
190
A Cupboard dry
8
1000
% 60
179
A Iron dry
8
1000
% 60
150
1,5
1200
% 60
50
Shirts
Jeans
4
1200
%50
120
Daily
4
1200
%50
90
Sport
4
1000
%60
105
Express
1
1200
%50
45
Delicates
2
600
%40
55
Baby
3
1000
% 60
80
B Cupboard dry
4
800
% 40
70
B Iron dry
4
800
% 40
55
Synthetics
Energy consumption values
Programmes
Capacity (kg)
Spin speed in
Approximate amount of Energy consumption
washing machine
remaining humidity
value kWh
(rpm)
Cottons linen Ready to wear*
8
1000
% 60
1,92
Cottons Ready to iron
8
1000
% 60
1,5
Synthetics Ready to wear
4
800
% 40
0,75
Power consumption of the off-mode for the standart cotton programme at full load, PO (W)
0,5
Power consumption of the left-on mode for the standart cotton programme at full load, PL (W)
1,0
Contains fluorinated greenhouse gases covered by the Kyoto Protocol. Hermetically sealed. R134a / 0,350 kg
„Cotton cupboard dry programme“ used at full and partial load is the standard drying programme
to which the information in the label and the fiche relates, that this programme is suitable for drying
normal wet cotton laundry and that it is the most efficient programme in terms of energy consumption
for cotton.
* : Energy Label standard programme (EN 61121:2012) “All the filters must be cleaned prior to test series.”
All the values in the table are determined according to EN 61121:2012 standard. Consumption values may vary from
the values in the table depending on laundry type, wringing revolution, ambient conditions and changes in voltage.
Dryer / User Manual
19 / 56 EN
Operating the product
5.8 Auxiliary functions
5.10 End duration
Sound warning cancel
You can delay the end duration of the programme for up
to 24 hours with the end duration function.
1. Open the loading door and place your laundry.
2. Select the drying programme.
3. Press the end duration selection button and set the
delay duration you want.
End duration led lights up. (End duration moves
continuously when you keep pressing the button).
4. Press the Start / Pause button. End duration
countdown begins. The “:” sign in the middle of
the displayed delay duration blinks.
Drying machine makes sound warnings when the
programme is completed. If you don’t want sound
notifications, press the “Sound Notification” button.
When you press the sound notification button it lights
up, and programme does not make sound notifications
when completed.
C
You can select this function before or after
the programme starts.
5.9 Warning symbols
C
Warning symbols may vary according to
the specifications of your machine.
Fiber filter cleaning
When the programme is completed, a warning led lights
up, which indicates that the filter has to be cleaned.
C
If the filter cleaning led blinks, see the
„Troubleshooting“ chapter.
Water tank
When the programme is completed, a warning led
lights up, which indicates that the water tank must be
emptied.
If the water tank fills up while the programme is running,
warning led starts blinking and the machine goes into
stand-by. In that case empty the water in the water
tank and start the programme by pressing the Start /
Pause button. Warning led turns off and the programme
resumes.
Loading door open
C
You can add or remove laundry for the
duration of the end duration. The duration
displayed on the screen is the sum of
the normal drying duration and the end
duration. At the end of the countdown the
end duration led turns off, drying beings
and drying led lights up.
Changing the end duration
If you want to change the duration during the
countdown:
1. Cancel the programme by pressing the On/
Off button. Turn on the drying machine again by
pressing the On/Off button. When your drying
machine turns on for the first time, it turns on
with the declaration (cotton wardrobe dryness)
programme.
2. Select the programme you desire using the
Programme Selection knob.
3. Repeat the end duration operation for the duration
you want.
4. Start the programme by pressing the Start / Pause
button.
Canceling the end duration function
If you want to cancel the end duration setting
countdown and start the programme right away:
1. Cancel the programme by pressing the On/
Off button. Turn on the drying machine again by
pressing the On/Off button. When your drying
machine turns on for the first time, it turns on
with the declaration (cotton wardrobe dryness)
programme.
2. Select the programme you desire using the
Programme Selection knob.
3. Start the programme by pressing the Start / Pause
button.
Start/Pause led blinks when the loading door of the
drying machine is open.
20 / 56 EN
Dryer / User Manual
Operating the product
5.11 Starting the programme
Start the programme by pressing the Start / Pause
button.
Start/Pause led and the Drying led light up, indicating
the programme started. The “:” sign in the middle of the
remaining duration starts to blink.
5.12 Child Lock
The machine features a child lock which prevents the
machine programme flow from being affected when
buttons are pressed during operation.
When the Child Lock is active, all buttons except for the
On/Off button are deactivated.
To activate the child lock, press the Sound Notification
button and End Duration button simultaneously for 3
seconds.
Te child lock should be deactivated to be able to start
a new programme after the current programme ends
or to be able to interfere with the current programme.
Keep the same buttons pressed for 3 seconds again to
deactivate the child lock.
C
C
5.13 Changing the programme after it
is started
After the machine starts running, you can change the
programme you selected to dry your laundry with a
different programme.
1. For example, to select Extra Dry programme
instead of the Iron Dryness, stop the programme
by pressing the Start / Pause button.
2. Turn the Programme Selection knob to select the
Extra Dry programme.
3. Start the programme by pressing the Start / Pause
button.
Adding and removing laundry in stand-by
mode
If you want to add or remove laundry after the drying
programme starts:
1. Press the Start/Pause button to take the machine
into Stand-by mode. Drying operation stops.
2. Open the loading door, add or remove laundry and
close the loading door.
3. Start the programme by pressing the Start / Pause
button.
The lock led on the screen lights up when
the Child Lock is activated.
C
The laundry adding made after the drying
operation started may cause the dried
laundry inside the machine to mix with
the wet laundry and the laundry to remain
damp after the operation ends..
Child Lock deactivates when the machine
is turned off and on again using the On/
Off button.
C
Laundry adding and removing can be
repeated as much as desired during
drying operation.
But this process would continuously
interrupt the drying operation, and so
would cause the programme duration
to lengthen and increase energy
consumption. Thus, it is recommended to
add laundry before the programme starts.
C
If a new programme is selected by
changing the position of the programme
selection knob while your machine is in
stand-by mode, the running programme
ends.
A warning sound is heard when any button is pressed
(except for On/Off button) or the Programme Selection
knob is turned while the child lock is active.
Do not contact the inner surface of the
drum when adding or removing laundry
during a continuing programme. The
drum surface is hot.
Dryer / User Manual
21 / 56 EN
Operating the product
5.14 Cancelling the programme
If you want to cancel the programme and end the
drying operation for any reason after the machine starts
running, press the On/Off button.
A
As it will be extremely hot inside the
machine when you cancel the programme
while the machine is in operation; run the
ventilation programme to cool it down.
5.15 Programme end
When the programme ends, the Final/Wrinkle
Prevention, Fiber Filter Cleaning and Water Tank
Warning leds on the programme follow up indicator light
up. Loading door can be opened and machine becomes
ready for a second run.
Press the On/Off button to turn off the machine.
C
In case the laundry is not removed after
the programme is completed, the wrinkle
prevention program that lasts 2 hours start
in order to prevent wrinkling of the laundry
that remains inside the machine.
C
C
Clean the fiber filter after each drying.
(See. „Fiber filter and loading door inner
surface“)
22 / 56 EN
Empty the water tank after each drying.
(See. „Emptying the water tank“)
Dryer / User Manual
6 Maintenance and cleaning
Service life of product extends and frequently
experienced problems will be reduced if it is cleaned at
regular intervals.
•
A layer can build up on the filter pores that can
cause clogging of the filter after using the dryer
for a while. Wash the lint filter with warm water
to remove the layer that builds up on the lint
filter surface. Dry the lint filter completely before
reinstalling it.
•
Clean the entire inner surface of the loading door
and loading door gasket with a soft damp cloth.
6.1 Cleaning Lint Filter / Loading Door
Inner Surface
Lint and fibre released from the laundry to the air during
the drying cycle are collected in the Lint Filter.
C
A
C
Such fibre and lint are generally formed
during wearing and washing.
Always clean the lint filter and the inner
surfaces of the loading door after each
drying process.
You can clean the lint filter housing with a
vacuum cleaner.
To clean the lint filter:
• Open the loading door.
• Remove the lint filter by pulling it up and open the
lint filter.
• Clean lint, fibre, and cotton raveling by hand or
with a soft piece of cloth.
• Close the lint filter and place it back into its
housing.
Dryer / User Manual
23 / 56 EN
Maintenance and cleaning
6.2 Cleaning the sensor
There are dampness sensors in the dryer that detect
whether the laundry is dry or not.
To clean the sensors:
• Open the loading doorof the dryer.
• Allow the machine to cool down if it is still hot due
to the drying process.
• Wipe the metal surfaces of the sensor with a soft
cloth, dampened with vinegar and dry them.
C
C
A
Clean metal surfaces of the sensors 4
times a year.
Do not use metal tools when cleaning
metal surfaces of the sensors.
Never use solvents, cleaning agents or
similar substances for cleaning due to the
risk of fire and explosion!
6.3 Draining the water tank
Dampness of the laundry is removed and condensed
during drying process and the water that arise
accumulates in the water tank. Drain the water tank
after each drying cycle.
A
A
Never remove the water tank when the
program is running!
If you forget to drain the water tank, the machine will
stop during the subsequent drying cycles when the
water tank is full and the Water Tank warning symbol
will flash. If this is the case, drain the water tank and
press Start / Pause button to resume the drying cycle.
To drain the water tank:
Pull the drawer and remove the water tank carefully.
•
Drain the water in the tank.
•
If there is lint accumulation in the funnel of the
water tank, clean it under running water.
Place the water tank into its seat.
•
C
24 / 56 EN
Condensed water is not drinkable!
If the direct water draining is used as
an option, there is no need to empty the
water tank.
Dryer / User Manual
Maintenance and cleaning
6.4 Cleaning the filter drawer
•
Open the filter drawer by pressing the red button.
•
Take out the filter drawer sponge.
•
Clean lint, fiber, and cotton raveling on the filter
cloth by hand or with a soft piece of cloth.
When you notice a layer that may lead clogging on
the filter cloth, please clean the layer by washing
in warm water. Let the filter cloth dry thoroughly
before installing back the filter drawer.
Lint and fiber that could not be captured by the lint
filter are blocked in the filter drawer behind the kick
plate. Filter Drawer Cleaning warning light will light up
maximum at every 5 drying cycles as a reminder.
There is a two-level filter in the filter drawer. Te first level
is the filter drawer sponge and the second level is the
filter cloth.
To clean the filter drawer:
• Press the kick plate button to open the kick plate.
•
Remove the filter drawer cover by turning it in the
direction of arrow.
•
•
Pull out the filter drawer.
•
Wash the filter drawer sponge by hand to remove
the fiber and lint on the surface. After washing the
sponge, squeeze it by hand and remove the excess
water. Well-dry the sponge before storing it.
C
Dryer / User Manual
It is not necessary to clean the sponge
if lint and fiber accumulation on it is not
significant.
25 / 56 EN
Maintenance and cleaning
•
Place the sponge back into its place.
A
C
Drying without the filter drawer sponge in
place will damage the machine!
A dirty lint filter and filter drawer will cause
longer drying periods and higher energy
consumption.
6.5 Cleaning the evaporator
•
Close the filter drawer as to lock the red button.
•
Place the filter drawer back into its place, turn the
filter drawer cover in the arrow direction and close
it securely.
•
Clean the lint accumulated on the fins of the evaporator
located behind the filter drawer with a vacuum cleaner.
A
You can also clean by hand provided that
you wear protective gloves. Do not attempt
to clean with bare hands. Evaporator fins
can harm your hand.
Close the kick plate cover.
26 / 56 EN
Dryer / User Manual
7 Troubleshooting
Drying process takes too much time.
• Poresofthelintfilterareclogged.>>>Wash the lint filter with warm water.
• Filterdrawerisclogged.>>>Clean the sponge and the filter cloth in the filter drawer.
• Ventilationgridsonthefrontsideofthemachineareblocked.>>>Remove the objects (if any)
•
that block ventilation in front of the ventilation grids.
Ventilationisnotsufficientsincetheroomwherethemachineisinstalledisverysmall.>>>Open the
door and window of the room to avoid the room temperature increase too much.
• Limedeposithasbuiltuponthedampnesssensor.>>>Clean the dampness sensor.
• Excessivelaundryisloaded.>>>Do not load the dryer in excess.
• Laundryisnotspunsufficiently.>>>Spin your laundry at a higher speed in your washing
machine.
Laundry comes out wet at the end of drying.
C
After drying, the hot clothes feel damper than their actual dampness level.
•
Itislikelythattheselectedprogrammedidnotsuitthelaundrytype.>>>Checking the care labels on
clothes, select appropriate programme for the laundry type or use timer programmes in
addition.
• Poresofthelintfilterareclogged.>>>Wash the lint filter with warm water.
• Filterdrawerisclogged.>>>Clean the sponge and the filter cloth in the filter drawer.
• Excessivelaundryisloaded.>>>Do not load the dryer in excess.
• Laundryisnotspunsufficiently.>>>Spin your laundry at a higher speed in your washing
machine.
Dryer does not switch on or the programme does not start. Dryer does not start when it is set.
•
•
•
•
Itisnotpluggedin.>>>Make sure that the machine is plugged in.
Theloadingdoorisajar.>>>Make sure that the loading door is closed securely.
ProgrammeisnotselectedortheStart/Pause/Cancelbuttonisnotpressed.>>>Make sure that the
programme is selected and the machine is not in Pause mode.
ChildproofLockisactivated.>>>Deactivate the Childproof Lock.
Programme is interrupted without any cause.
• Loadingdoorisajar.>>>Make sure that the loading door is closed securely.
• Therewasapowerfailure.>>>Press Start / Pause / Cancel button to start the programme.
• Watertankisfull.>>>Drain the water tank.
Laundry has shrunk, become felted or deteriorated.
• Aprogrammesuitableforthelaundrytypeisnotused.>>>Check the garment tag and select a
programme suitable for the fabric type.
Drum lighting does not turn on. (On models with lamp)
• DryerisnotswitchedonwiththeOn/Offbutton.>>>Make sure that the dryer is switched on.
• Lampisdefective.>>>Call Authorized Service Agent to have the lamp replaced.
End/Anti-creasing symbol is on.
• Anti-creasingprogrammeisactivatedinordertopreventlaundrythathasremainedinthemachinefrom
creasing.>>>Turn off the dryer and take out the laundry.
End symbol is on.
• Programmeisover.Turnoffthedryerandtakeoutthelaundry.
Dryer / User Manual
27 / 56 EN
Troubleshooting
Lint Filter Cleaning symbol is on.
• Lintfilterisnotcleaned.>>>Clean the lint filter.
Lint Filter Cleaning symbol is flashing.
• Filterhousingiscloggedwithlints.>>>Clean the lint filter housing.
• Adeposithasbuiltuponthelintfilterporesthatmaycauseclogging.>>>Wash the lint filter with
warm water.
• Filterdrawerisclogged.>>>Clean the sponge and the filter cloth in the filter drawer.
Water leaks from the loading door
• Linthasaccumulatedontheinnersurfacesoftheloadingdoorandonthesurfacesoftheloadingdoor
gasket.>>>Clean the inner surfaces of the loading door and the surfaces of the loading
door gasket.
Loading door opens spontaneously.
• Loadingdoorisajar.>>>Push the loading door to close until you hear a locking sound.
Water Tank warning symbol is on/flashing.
• Watertankisfull.>>>Drain the water tank.
• Waterdraininghoseisbent.>>>Iftheproductisconnecteddirectlytoawastewaterdrain,checkthewater
drain hose.
Filter Drawer Cleaning warning symbol is flashing.
• Filterdrawerisnotcleaned.>>>Clean the sponge and the filter cloth in the filter drawer.
A
28 / 56 EN
If you cannot eliminate the problem although you follow the instructions in this section, consult your
dealer or the Authorized Service Agent. Never try to repair a nonfunctional product yourself.
Dryer / User Manual
Download PDF

advertising