Infotainment manual - POM Adam, v.3 (rev ), en-GB

OPEL ADAM
Infotainment Manual
Contents
IntelliLink ........................................ 5
CD 3.0 BT / R 3.0 ........................ 59
FlexDock .................................... 101
IntelliLink
Introduction .................................... 6
Radio ........................................... 20
External devices .......................... 30
Speech recognition ...................... 42
Phone .......................................... 44
Index ............................................ 54
6
Introduction
Introduction
General information ....................... 6
Theft-deterrent feature ................... 7
Control elements overview ............ 8
Usage .......................................... 10
Basic operation ............................ 13
Tone settings ............................... 16
Volume settings ........................... 17
System settings ........................... 18
General information
The Infotainment system provides
you with state-of-the-art in-car
infotainment.
Using radio tuner functions, you may
register up to 35 stations on seven
favourites pages.
For the different wavebands the radio
is equipped with 15 automatically
assignable channel presets.
Furthermore, 35 channels can be
allocated manually (wavebandindependent).
You can connect external data
storage devices, e.g. iPod, USB
devices, or other auxiliary devices to
the Infotainment system as further
audio sources; either via cable or via
Bluetooth.
Using the controls and menus of the
Infotainment system, you can operate
approved smartphone applications,
e.g. a navigation app.
In addition, the Infotainment system is
equipped with a Phone portal that
allows for comfortable and safe use of
your mobile phone in the vehicle.
Optionally, the Infotainment system
can be operated using the controls on
the steering wheel, or via the speech
recognition application 'Siri Eyes
Free'.
The well-thought-out design of the
control elements, the touchscreen
and the clear displays enable you to
control the system easily and
intuitively.
Note
This manual describes all options
and features available for the
various Infotainment systems.
Certain descriptions, including those
for display and menu functions, may
not apply to your vehicle due to
model variant, country
specifications, special equipment or
accessories.
Introduction
Important information on
operation and traffic safety
9 Warning
The Infotainment system must be
used so that the vehicle can be
driven safely at all times. If in
doubt, stop the vehicle and
operate the Infotainment system
while the vehicle is stationary.
Radio reception
Radio reception may be disrupted by
static, noise, distortion or loss of
reception due to:
■ changes in distance from the
transmitter
■ multipath reception due to
reflection
■ shadowing
Theft-deterrent feature
The Infotainment system is equipped
with an electronic security system for
the purpose of theft deterrence.
The Infotainment system therefore
functions only in your vehicle and is
worthless to a thief.
7
8
Introduction
Control elements overview
Control panel IntelliLink
Introduction
1
2
Display / touchscreen ............ 13
Home menu .......................... 13
Screen buttons for access to
♪ Audio: audio functions
g: smartphone application
active ..................................... 30
5
p: volume muted ................... 10
Time and date, outside
temperature
Adjusting time and date,
see Owner's Manual.
; .......................................... 13
6
Press: open Home menu
(see item 2)
m ........................................... 10
7
Press: switch on/off
Infotainment system
∨ VOL ∧ ................................. 10
4
P Gallery: picture and
movie functions
h Phone: mobile phone functions
K Apps: smartphone
applications
3
L Settings: system settings
Function indicators
If symbol is highlighted:
TP - radio traffic service
active ..................................... 24
M: external device
connected to USB port .......... 30
Steering wheel audio controls
1
7w
Short press: take phone call . 44
or dial number in call list ....... 48
∨: reduce volume
or activate speech
recognition ............................ 42
∧: increase volume
Long press: open call list ...... 48
G: auxiliary device
connected to AUX input ........ 30
N: Bluetooth device
connected ............................. 30
9
2
or switch handsfree mode
on/off ..................................... 48
SRC (Source) ........................ 10
Press: select audio source .... 10
10
Introduction
With radio active: turn
upwards/downwards to
select next/previous
preset radio station ............... 20
With external device
active: turn upwards/
downwards to select next/
previous track/chapter/
picture ................................... 33
With Phone portal active
and call list open (see
item 1): turn upwards/
downwards to select next/
previous entry in call list ........ 48
3
With Phone portal active
and calls waiting: turn
upwards/downwards to
switch between calls ............. 48
+
4
Increase volume
-
5
Reduce volume
xn
Press: end/decline call .......... 48
or close call list ...................... 48
or deactivate speech
recognition ............................ 42
or activate/deactivate
mute function ........................ 10
Usage
Control elements
The Infotainment system is operated
via function buttons, a touchscreen
and menus that are shown on the
display.
Inputs are made optionally via:
■ the central control unit in the
instrument panel 3 8
■ audio controls on the steering
wheel 3 8
■ the speech recognition system
3 42
Switching the Infotainment
system on or off
Press X. After switching on, the last
selected Infotainment source
becomes active.
Automatic switch-off
If the Infotainment system has been
switched on pressing X while the
ignition is switched off, it will switch off
again automatically 10 minutes after
the last user input.
Introduction
Setting the volume
Press ∨ or ∧. The current setting is
shown on the display.
Optionally, using the touchscreen:
move the volume slider with your
finger to the left or right.
When the Infotainment system is
switched on, the last selected volume
is set, provided that it is lower than the
maximum start-up volume. For a
detailed description 3 17.
Speed compensated volume
When the speed compensated
volume is activated 3 17, the
volume is adapted automatically to
make up for the road and wind noise
as you drive.
Volume of traffic announcements
(TA)
The volume of traffic announcements
can be set separately 3 17.
Mute
Press ∨ or ∧ and then tap on the p
screen button in the volume menu
displayed.
To cancel the mute function: press ∨
or ∧. The last selected volume is set
again.
Volume limitation at high
temperatures
At very high temperatures inside the
vehicle, the Infotainment system
limits the maximum adjustable
volume. If necessary, the volume is
decreased automatically.
11
Note
For a detailed description of menu
operation via touchscreen 3 13.
Audio
Select the Audio screen button to
open the main menu of the last
selected audio mode.
Select Source in the top line of the
menu to open a drop down list.
Modes of operation
Press the ; button to display the
Home menu.
To change to another audio mode:
tap on one of the list items.
12
Introduction
For a detailed description of:
■ radio tuner functions 3 20
■ external devices (USB, AUX,
Bluetooth) 3 33
Gallery
Select the Gallery screen button to
open the main menu of the last
selected picture or movie mode.
Select Source in the top line of the
menu to open a drop down list.
To change to another picture or movie
mode: tap on one of the list items.
For a detailed description of:
■ picture functions 3 36
■ movie functions 3 37
Phone
Select the Phone screen button to
establish a Bluetooth connection
between the Infotainment system and
a mobile phone.
If a connection can be established,
the main menu of the phone mode is
displayed.
For a detailed description of mobile
phone operation via the Infotainment
system 3 48.
If no connection can be established,
a corresponding message is
displayed. For a detailed description
of preparing and establishing a
Bluetooth connection between the
Infotainment system and a mobile
phone 3 44.
Apps
Select the Apps screen button to
open a menu for selection and start of
approved smartphone applications
supported by the Infotainment
system.
For a detailed description 3 30 and
3 40.
Introduction
Settings
Select the Settings screen button to
open a menu for various system
related settings.
Basic operation
Controls for menu operation
Touchscreen
The display of the Infotainment
system has a touch-sensitive surface
that allows direct interaction with the
displayed menu controls.
For example, you can activate an onscreen button by tapping on it with
your finger or you can change the
position of an on-screen slider
element by moving it with your finger.
Caution
Time & date settings and Vehicle
settings are described in the Owner's
Manual.
All other settings are described by
theme in the respective chapters of
this manual.
13
Do not use pointed or hard items
like ballpoint pens, pencils or
similar for touchscreen operation.
; button
Press the ; button to access the
Home menu.
Using the touchscreen, you may then
access further menus and functions.
q screen button
14
Introduction
When operating the menus, press
q in the respective submenu to
return to the next higher menu level.
Menu operation (examples)
Selecting and activating a screen
button or menu item
Tap on a screen button or menu item.
The corresponding system function is
activated, a message is displayed, or
a submenu with further options opens
up.
Note
In subsequent chapters the
operating steps for selecting and
activating a screen button or menu
item via the touchscreen will be
described as "...select <button
name>/<item name>".
Scrolling through a long list of menu
items
Messages
Before a system function is executed,
you are sometimes prompted with a
message. If requested, confirm the
message or select one of the options.
If there are more menu items
available than presentable on the
screen, a scroll bar is displayed.
To scroll through the list of menu
items, you may alternatively:
■ Tap ▲ or ▼ above and below the
scroll bar.
■ Move the slider of the scroll bar with
your finger up or down.
The selection and activation of a
screen button in a message function
are the same as described for screen
buttons in a menu.
Introduction
Adjusting a setting
The different setting types available in
the various settings menus are shown
and described below.
Example: Display settings
Tap - or + or move the slider next to a
setting to adjust this setting. Confirm
your choice by selecting OK .
Note
In subsequent chapters the
operating steps for adjusting a
setting via the touch screen will be
described as "...adjust
the...setting...".
Example: Radio settings
Example: RDS option
Tap < or > next to a setting to choose
one of the available options or to set
a specific value.
Tap On or Off next to a setting to
activate or deactivate this option.
Note
In subsequent chapters the
operating steps for switching to
another option via the touch screen
will be described as
"...set...to...'option name'/'value'...".
15
Note
In subsequent chapters the
operating steps for switching a
setting On/Off via the touchscreen
will be described as "...set <setting
name> to On/Off".
16
Introduction
Example: DAB category list
Tone settings
In the tone settings menu, the tone
characteristics can be set differently
for each radio waveband and each
external audio source. The menu may
be accessed from each individual
audio main menu.
To open the tone settings menu,
select MENU in the bottom line of the
respective main menu. If necessary,
scroll through the list of menu items
and select Tone settings. The
respective menu is displayed.
Tap on a list item to select or deselect
the option. If a list item is selected, a
checkmark appears within the box
next to the item.
Use this setting to optimise the tone
for the style of music, e.g. Rock or
Classical.
Select the desired sound style. If you
choose Manual, you can manually
adjust the following settings.
Bass
Use this setting to enhance or
attenuate the deep frequencies of the
audio sources.
Set Bass to a value between -12 and
12.
Mid
Use this setting to enhance or
attenuate the midrange frequencies
of the audio source.
Set Mid to a value between -12 and
12.
Note
In subsequent chapters the
operating steps for choosing an
option via the touch screen will be
described as "...choose...'option
name'...".
EQ mode
(EQ: Equaliser)
Treble
Use this setting to enhance or
attenuate the high frequencies of the
audio sources.
Set Treble to a value between -12 and
12.
Introduction
Setting balance and fader
Use the illustration at the right side of
the menu to adjust balance and fader.
To define the point in the passenger
compartment where the sound is at its
highest level, tap on the
corresponding point in the illustration.
Alternatively, you can move the red
marker with your finger to the desired
point.
Note
The balance and fader settings are
valid for all audio sources. They
cannot be adjusted individually for
each audio source.
Resetting to factory defaults
Select Reset.
Saving current settings
Select OK.
Volume settings
Adjusting the maximum startup
volume
Press the ; button and then select
the Settings screen button.
17
Scroll through the list to Max startup
volume.
Set Max startup volume to a value
between 13 and 37.
Adjusting the speed
compensated volume
Press the ; button and then select
the Settings screen button.
Select Radio settings to display the
respective menu.
To adjust the degree of volume
adaptation, set Auto volume to Off,
Low, Medium or High.
Off: no enhancement of volume with
increasing vehicle speed.
High: maximum enhancement of
volume with increasing vehicle
speed.
Adjusting the volume of traffic
announcements
The volume of traffic announcements
can be preset separately to a level
independent of the "normal" volume
level.
18
Introduction
Press the ; button and then select
the Settings screen button.
Select Radio settings and then RDS
option to display the respective menu.
Set Ringtone volume to a value
between 0 and 63.
Set TP volume to a value between 0
and 63.
Adjusting the ring tone volume
Press the ; button and then select
the Settings screen button.
Select Connection settings to display
the respective menu.
Activating or deactivating the
touch beep volume function
If the touch beep volume function is
activated, each tap on a screen
button or menu item is indicated by a
beeping sound.
Press the ; button and then select
the Settings screen button.
Scroll through the list to Touch beep
volume .
Set the function to On or Off.
System settings
Adjusting the language
Press the ; button and then select
the Settings screen button.
Select Language (language) to
display the respective menu.
Introduction
To adjust the language for the menu
texts: tap on the desired language.
Activating or deactivating the
text scroll function
If long text is displayed on the screen,
the text may either be scrolled
continually or it may be scrolled once
and displayed in truncated form.
Press the ; button and then select
the Settings screen button.
Scroll through the list to Text scroll.
19
If you wish the text to be scrolled
continually, set the function to On.
If you wish the text to be scrolled in
blocks, set it to Off.
To reset all settings: tap Radio factory
settings and confirm the messages
appearing afterwards.
Resetting to factory defaults
Press the ; button and then select
Settings.
Scroll through the list and select
System version.
All settings, e.g. the volume and tone
settings, the favourite lists, or the
Bluetooth device list can be reset to
the factory defaults.
Press the ; button and then select
the Settings screen button.
Select Radio settings to display the
respective menu.
Displaying the system version
20
Radio
Radio
Usage
Activating the radio
Usage .......................................... 20
Station search .............................. 20
Autostore lists .............................. 21
Favourite lists ............................... 22
Waveband menus ........................ 22
Radio data system (RDS) ............ 24
Digital audio broadcasting ........... 26
Press the ; button and then select
the Audio screen button. The audio
main menu last selected is displayed.
Select Source to open a drop down
list.
Select a radio waveband, e.g. AM or
FM.
The station last played in the selected
waveband will be received.
Note
To display information on the
currently active radio station: tap on
the display.
Station search
Automatic station search
Briefly tap t or v screen buttons to
play the previous or next station in the
station memory.
Manual station search
Tap and hold t or v. Release
when the required frequency has
almost been reached.
Radio
21
A search is made for the next station
that can be received and it is played
automatically.
Note
Manual station search: If the radio
does not find a station, it switches
automatically to a more sensitive
search level. If it still does not find a
station, the frequency that was last
active is set again.
Note
FM waveband: when the RDS
function is activated, only RDS
stations 3 24 are searched for, and
when the radio traffic service (TP) is
activated, only traffic service
stations 3 24 are searched for.
Station tuning
Tap and hold or repeatedly tap _ or
6 to adjust the frequency of the
desired radio station.
If Radio tune bar in the Radio
settings menu (see note below) is set
to On, a tune bar is displayed when
tapping _ or 6 screen buttons.
You may now manually tune or seek
for radio stations.
Note
To open the Radio settings menu:
press the ; button, select the
Settings screen button and then
select the Radio settings menu item.
Autostore lists
The stations received best in a
waveband can be searched for and
stored automatically via the autostore
function.
Each waveband has 3 autostore lists
(AS 1/3, AS 2/3 and AS 3/3), in each
of which 5 stations may be stored.
Note
If the FAV tab is currently shown in
the foreground: tap on the AS tab to
display the autostore lists.
Note
The currently received station is
highlighted.
Storing stations
If required, tap on the AS tab to
display the autostore lists.
22
Radio
Tap on and hold the AS tab for a few
seconds. A message is displayed and
the stations received best in the
active waveband are stored in the
autostore lists.
To store the currently active radio
station to a preset screen button: tap
on and hold the desired screen button
for a few seconds. The corresponding
frequency or station name is
displayed on the screen button.
Note
If there are no stations stored in the
AS stations lists, the lists will be
updated automatically when you first
select the AS tab.
Retrieving stations
Retrieving stations
If required, tap AS to display the
autostore lists.
If required, tap < or > to select
another autostore list.
Select the preset screen button on
which the desired radio station is
stored.
Favourite lists
Stations of all wavebands can be
stored manually in the favourite lists.
Seven favourite lists are available, in
each of which 5 stations may be
stored.
Note
If the AS tab is currently shown in the
foreground: tap on the FAV tab to
display the favourite lists.
Note
The currently received station is
highlighted.
Storing a station
If required, tap on the FAV tab to
display the favourite lists.
If required, tap < or > to select
another favourite list.
If required, tap FAV to display the
favourite lists.
If required, tap < or > to select
another favourite list.
Select the preset screen button on
which the desired radio station is
stored.
Waveband menus
Alternative facilities for station
selection are available via waveband
specific menus.
Tap MENU in the bottom line of the
active radio main menu to open the
corresponding waveband specific
submenu.
Note
The following FM specific displays
are shown as examples.
Radio
Select the desired station.
Note
The currently received radio station
is indicated by the l symbol next to
the station name.
Station lists
Within a waveband menu, select a
stationlist, e.g. FM station list . All
receivable stations of the relevant
waveband and in the current
reception area are displayed.
Favorite list
Select Favorite list to display all
stations currently stored in the
favourites lists.
23
Note
The currently received radio station
is indicated by the l symbol next to
the station name.
Category lists
Numerous radio stations broadcast a
PTY code, which specifies the type of
programme transmitted (e.g. news).
Some stations also change the PTY
code depending on the content which
is currently transmitted.
The Infotainment system stores these
stations, sorted by programme type in
the corresponding category list.
Note
The category list submenu item is
not available for the AM waveband.
To search for a programme type
determined by the stations, select the
waveband specific category list
option.
Select the desired station.
24
Radio
Update station lists
A list of programme types currently
available is displayed.
Note
For the DAB waveband, only the
selected categories 3 26 are
displayed in the category list.
Select the desired programme type. A
list of stations is displayed
transmitting a programme of the
selected type.
Select the desired station.
Note
The currently received radio station
is indicated by the l symbol next to
the station name.
Radio data system (RDS)
If the stations stored in a waveband
specific station list can no longer be
received, select the respective menu
item to update the station list in the
waveband menu, e.g. Update FM
station list.
RDS is a service of FM stations that
considerably facilitates the finding of
the desired station and its fault-free
reception.
Note
If a waveband-specific station list is
updated, the corresponding
category list is also updated.
■ On the display, the programme
name of the station appears
instead of its frequency.
■ During a station search, the
Infotainment system tunes in to
RDS stations only.
■ The Infotainment system always
tunes into the best receivable
broadcasting frequency of the set
station by means of AF (alternative
frequency).
■ Depending on the station that is
received, the Infotainment system
displays radio text that can contain
e.g. information about the current
programme.
A station search is started and a
corresponding message is displayed.
Once the search is finished, the
respective station list is displayed.
Note
The currently received radio station
is indicated by the l symbol next to
the station name.
Tone settings
For a detailed description of the Tone
settings menu 3 16.
Advantages of RDS
RDS option menu
To open the menu for the RDS
configuration:
Radio
Press the ; button and then select
the Settings screen button.
Select Radio settings and then RDS
option to display the respective menu.
Note
If RDS is set to Off, not all menu
items shown above are displayed.
Traffic announcements (TA)
Radio traffic service stations are RDS
stations that broadcast traffic news. If
the traffic service is switched on, the
currently active function is interrupted
for the duration of the traffic
announcement.
Switching the traffic announcements
on and off
Set TA to On or Off.
If the radio traffic service is activated,
[TP] is shown in the top line of all main
menus. If the current station is not a
radio traffic service station, TP is
greyed out and a search is started
automatically for the next radio traffic
service station. As soon as a radio
traffic service station is found, TP is
highlighted. If no radio traffic service
station is found, TP remains greyed
out.
If a traffic announcement is
broadcasted on the respective
station, a message is displayed.
To interrupt the announcement and
return to the function previously
activated: select Cancel in the
message.
TP volume
The volume of traffic announcements
can be preset to a value between 0
and 63.
25
RDS configuration
Set RDS to On or Off.
Radio text
If the RDS function is activated and a
RDS station is currently received,
information about the current
programme and the music track
currently playing are displayed below
the programme name.
To show or hide the information, set
Radio text to On or Off.
Regionalisation
Sometimes RDS stations broadcast
regionally different programmes on
different frequencies.
Set Regional to On or Off.
If regionalisation is switched on,
alternative frequencies with the same
regional programmes are selected
where necessary. If regionalisation is
switched off, alternative frequencies
of the stations are selected without
regard to regional programmes.
26
Radio
PSN scroll freeze
Some RDS stations do not only
indicate the programme service name
(PSN) on the display, but also show
additional information about the
current programme. If additional
information is displayed, the
programme name is hidden.
To prevent additional information
from being displayed, set PSN scroll
freeze to On.
Digital audio broadcasting
Digital audio broadcasting (DAB) is
an innovative and universal
broadcasting system.
DAB stations are indicated by the
programme name instead of the
broadcasting frequency.
General information
■ With DAB, several radio
programmes (services) can be
broadcasted on a single frequency
(ensemble).
■ Besides high-quality digital audio
services, DAB is also able to
transmit programme-associated
data and a multitude of other data
services including travel and traffic
information.
■ As long as a given DAB receiver
can pick up the signal sent out by a
broadcasting station (even if the
signal is very weak), sound
reproduction is ensured.
■ There is no fading (weakening of
the sound that is typical of AM or
FM reception). The DAB signal is
reproduced at a constant volume.
If the DAB signal is too weak to be
picked up by the receiver, reception
is interrupted completely. This
incident can be avoided by
activating Service linking DAB and/
or Service linking FM in the DAB
option menu (see below).
■ Interference caused by stations
that are on nearby frequencies (a
phenomenon that is typical of AM
and FM reception) does not occur
with DAB.
■ If the DAB signal is reflected by
natural obstacles or buildings, the
reception quality of DAB is
improved, whereas AM or FM
reception is considerably impaired
in such cases.
■ When DAB reception is enabled,
the FM tuner of the Infotainment
system remains active in the
background and continually
searches for the best receivable FM
stations. If TP 3 24 is activated,
traffic announcements of the FM
station which is currently best
receivable are issued. Deactivate
TP, if DAB reception should not be
interrupted by FM traffic
announcements.
DAB option menu
To open the menu for the DAB
configuration:
Press the ; button and then select
the Settings screen button.
Select Radio settings and then DAB
option to display the respective menu.
Radio
27
ensemble (frequency, if available)
when the DAB signal is too weak to
be picked up by the receiver.
Set Service linking DAB to On or Off.
DAB category settings
To choose which categories are
displayed in the DAB category list in
the DAB menu 3 22, select DAB
category settings. The respective
menu is displayed.
Select All or select and deselect only
some categories from the available
options.
Select OK to confirm your choice.
DAB configuration
In the DAB option menu you can
setup features concerning the DAB
radio reception.
Service linking DAB
If this function is activated, the device
switches over to the same service
(programme) on another DAB
Service linking FM
If this function is activated, the device
switches over to a corresponding FM
station of the active DAB service (if
available) when the DAB signal is too
weak to be picked up by the receiver.
Set Service linking FM to On or Off.
Dynamic range compression
If this function is activated, the
dynamic range of the DAB signal is
reduced. That means that the level of
loud sounds is reduced and the level
of quiet sounds is increased.
Therefore the volume of the
Infotainment system can be raised to
a point where the quiet sounds are
audible, without the loud sounds
being too loud.
Set Dynamic range ctrl to On or Off.
28
Radio
Selecting a frequency band
With this function, you may define
which DAB wavebands are to be
received by the Infotainment system.
Choose L-Band only
(1452 - 1492 MHz, earth and satellite
radio) Band lll only (174 - 240 MHz,
earth radio) or Both.
To show or hide these pictures,
graphics or videos sequences, set
Slide Show to On or Off.
Radio text
If this function is activated, additional
information about the programme
currently received or the music track
currently playing such as title, artist,
music type, news or traffic updates
are displayed.
To show or hide the information, set
Radio text to On or Off.
DAB announcements
Besides their music programmes,
many DAB stations also broadcast
announcements of various
categories. If you activate some or all
categories, the currently received
DAB service is interrupted when an
announcement of these categories is
made.
Select DAB announcements in the
DAB waveband menu. A list of
categories is displayed.
Slide Show
If this function is activated, additional
information about the programme
currently received or the music track
currently playing are displayed in
form of pictures, graphics or short
video sequences.
Waveband menu
Tap on the MENU screen button in
the bottom line of the DAB main menu
to open the waveband submenu.
Activate all or just the desired
announcement categories. Different
announcement categories can be
selected at the same time.
EPG current program
A lot of DAB stations also offer an
electronic programme guide. An
electronic programme guide (EPG)
provides you with continuously
updated information about current
and upcoming programmes.
To display information on the
currently active programme, select
EPG current program .
Radio
EPG station list
The EPG station list contains the
stations providing an electronic
programme guide.
To display current and upcoming
programmes of the respective station,
select Info next to the station name.
Intellitext
The Intellitext function allows the
reception of additional information
such as announcements, financial
information, sports, news etc.
Select one of the categories and
choose a specific item to display
detailed information.
Info
To display detailed information on the
currently active DAB station, select
Info.
29
30
External devices
External devices
General information
General information ..................... 30
Playing audio ............................... 33
Displaying pictures ....................... 36
Playing movies ............................. 37
Using smartphone applications . . . 40
In the centre console below the
climate controls, there is an AUX
socket and a USB socket for the
connection of external audio data
sources.
Note
The sockets must always be kept
clean and dry.
AUX input
It is possible to connect e.g. an iPod
or another auxiliary device with a
3.5 mm jack plug to the AUX input.
When connected to the AUX input,
the audio signal of the auxiliary device
is transmitted via the speakers of the
Infotainment system.
The volume and the tone settings can
be adjusted via the Infotainment
system. All other control functions
must be operated via the auxiliary
device.
Connecting a device
To connect the auxiliary device to the
AUX input socket of the Infotainment
system, use one of the following
cables:
3-pole for audio source, 4-pole for
movie source.
External devices
Note
To use the movie function with your
iPod/iPhone, connect your device to
the AUX port only. A constant
connection cannot be established
via the USB port.
USB port
1
2
3
4
=
=
=
=
left audio signal
right audio signal
ground
video signal
AUX audio function
The Infotainment system can play
music files contained in auxiliary
devices e.g. smartphones or iPod/
iPhone products.
AUX movie function
The Infotainment system can play
movies contained in auxiliary devices
e.g. smartphones or iPod/iPhone
products.
An MP3 player, USB drive, SD card
(via USB connector/adapter), iPod or
smartphone can be connected to the
USB port.
When connected to the USB port,
various functions of the devices
mentioned above can be operated via
the controls and menus of the
Infotainment system.
Note
Not all MP3 player, USB drive, SD
card, iPod models or smartphones
are supported by the Infotainment
system.
Connecting/disconnecting a device
Connect the USB device or iPod to
the USB port. For the iPod, use the
appropriate connection cable. The
music function starts automatically.
31
Note
If a non-readable USB device or
iPod is connected, a corresponding
error message appears and the
Infotainment system automatically
switches to the previous function.
To disconnect the USB device or
iPod, select another function and then
remove the USB storage device.
Caution
Avoid disconnecting the device
during playback. This may
damage the device or the
Infotainment system.
USB audio function
The Infotainment system can play
music files contained in USB storage
devices or iPod/iPhone products.
USB picture function
The Infotainment system can display
pictures contained in USB storage
devices.
32
External devices
USB movie function
The Infotainment system can play
movies contained in USB storage
devices.
Note
To use the movie function with your
iPod/iPhone, connect your device to
the AUX port only. A constant
connection cannot be established
via the USB port.
Bluetooth
Bluetooth enabled audio sources
(e.g. music mobile phones, MP3
players featuring Bluetooth, etc.),
which support the Bluetooth music
profiles A2DP and AVRCP can be
connected wirelessly to the
Infotainment system.
Connecting a device
For a detailed description on the
Bluetooth connection 3 45.
Bluetooth audio function
The Infotainment system can play
music files contained in Bluetooth
devices e.g. smartphones or iPod/
iPhone products.
Support of smartphone
applications
The Apps function of the Infotainment
system allows access to approved
smartphone applications. The
Infotainment system authorises
application updates as they become
available.
Before an approved application can
be operated using the controls and
menus of the Infotainment system,
the respective application must be
installed on the smartphone.
Follow the instructions on the
smartphone when installing an
approved smartphone application.
File formats and folders
The maximum capacity of a device
supported by the Infotainment system
amounts to 2500 music files,
2500 picture files, 250 movie files,
2500 folders and 10 stages of folder
structure. Only devices formatted in
the FAT16/FAT32 file system are
supported.
Note
Some files may not be played
properly. This might be due to a
different recording format or the
condition of the file.
Files from online shops to which
digital rights management has been
applied cannot be played.
The Infotainment system can play the
following audio, picture and movie
files stored on external devices.
Audio files
The playable audio file formats
are .mp3, .wma, .ogg and .wav.
When playing a file with ID3 tag
information, the Infotainment system
can display information, e.g. on the
track title and artist.
Picture files
The displayable picture file formats
are .jpg, .bmp, .png and .gif.
.jpg files must have a size of 64 to
5000 pixels in width and 64 to
5000 pixels in height.
External devices
.bmp, .png and .gif files must have a
size of 64 to 1024 pixels in width and
64 to 1024 pixels in height.
Movie files
The playable movie file formats
are .avi, .mpg, .mp4, .divx, .xvid
and .wmv.
The resolution of the files must not
exceed 720 pixels in width and
576 pixels in height. The frame rate
must be less that 30 fps.
Usable codecs are divx, xvid,
mpeg-1, mpeg-4 (mpg4, mp42,
mp43) and wmv9 (wmv3).
The playable audio formats
are .mp3, .ac3, .aac and .wma.
The displayable subtitle format
is .smi.
Playing audio
Auxiliary device
Activating the AUX function
If the auxiliary device is not yet
connected to the Infotainment
system, connect the device 3 30. The
AUX audio menu is displayed and
playback of the audio tracks starts
automatically.
In case the auxiliary device is already
connected:
If required, press the ; button and
then select the Audio screen button to
open the audio main menu last
selected.
If required, select Source to open a
drop down list and then select AUX to
open the respective audio main
menu.
Playback of the audio tracks starts
automatically.
33
Changing the tone settings
Select the k Tone settings screen
button to open the respective menu.
For a detailed description 3 16.
Note
The volume and the tone settings
can be adjusted via the Infotainment
system. All other functions must be
performed via the auxiliary device.
USB device and iPod
Activating the USB device or iPod
function
If the USB device or iPod is not yet
connected to the Infotainment
system, connect the device 3 30. The
respective audio main menu is
displayed and playback of the audio
tracks starts automatically.
In case the USB device or iPod is
already connected:
If required, press the ; button and
then select the Audio screen button to
open the audio main menu last
selected.
34
External devices
If required, select Source to open a
drop down list and then select USB to
open the respective audio main
menu.
Playback of the audio tracks starts
automatically.
Playing the next or previous track
Tap v to play the next track.
Tap t within the first 2 seconds of
the track playing to return to the
previous track.
Returning to the beginning of the
current track
Tap t after 2 seconds of the track
playing.
Fast forwarding and rewinding
Press and hold t or v. Release to
return to the normal playback mode.
Alternatively, you can move the slider
showing the current track position
with your finger to the left or right.
Note
Album covers are displayed, if they
are comprised in the audio file e.g.
MP3 file.
Interrupting and resuming playback
Tap = to interrupt playback. The
screen button changes to l.
Tap l to resume playback.
Playing tracks repeatedly
Repeatedly tap r to choose one of
the following options.
1
= The current track is played
repeatedly.
ALL = All tracks on the device are
played repeatedly.
OFF = Normal playback mode.
Playing tracks randomly
Repeatedly tap s to activate or
deactivate the function.
ON = All tracks on the device are
played in random order.
OFF = Normal playback mode.
Viewing information
To display information on the track
currently playing, tap on the screen. A
message is displayed showing
information, e.g. on the title, artist, or
album, saved with the track.
Using the music menu
Tap MENU to open the respective
music menu.
Different categories, in which the
tracks are sorted, are displayed, e.g.
Folders, Artists, or Albums.
External devices
Select the desired category,
subcategory (if available) and then
choose a track.
Changing the tone settings
Select Tone settings to open the
respective menu. For a detailed
description 3 16.
In case the Bluetooth device is
already connected:
If required, press the ; button and
then select the Audio screen button to
open the audio main menu last
selected.
If required, select Source to open a
drop down list and then select
Bluetooth to open the respective
audio main menu.
Playback of the audio tracks starts
automatically.
Tap l to resume playback.
Playing the next or previous track
Tap v to play the next track.
Tap t within the first 2 seconds of
the track playing to return to the
previous track.
Returning to the beginning of the
current track
Tap t after 2 seconds of the track
playing.
Fast forwarding and rewinding
Tap and hold t or v. Release to
return to the normal playback mode.
Playing a track or file repeatedly
Repeatedly tap r to choose one of
the following options.
1
= The current track is played
repeatedly.
ALL = All tracks on the device are
played repeatedly.
OFF = Normal playback mode.
Bluetooth music
Activating the Bluetooth music
function
If the Bluetooth device is not yet
connected to the Infotainment
system, establish a Bluetooth
connection 3 45 and then continue
as described below.
35
Interrupting and resuming playback
Tap = to interrupt playback. The
screen button changes to l.
Playing a file randomly
Repeatedly tap s to activate or
deactivate the function.
36
External devices
ON = All tracks on the device are
played in random order.
OFF = Normal playback mode.
Note
Depending on the mobile phone
some of these functions may not be
available.
Changing the tone settings
Select k to open the Tone settings
menu. For a detailed description
3 16.
If required, press the ; button and
then select the Gallery screen button
to open the picture or movie main
menu last selected.
If required, select Source to open a
drop down list and then select USB
(Picture) to open the respective main
menu.
A picture is automatically displayed.
You can view pictures from a USB
device.
Rotating a picture
Tap u or v to rotate the picture
clockwise or counterclockwise.
Viewing a slide show
Zoom in on a picture
Tap w once or several times to zoom
in on a picture or to return to its
original size.
Note
For your safety, some features are
disabled while your vehicle is in
motion.
If the USB device is not yet connected
to the Infotainment system, connect
the device 3 30 and then continue as
described below.
In case the USB device is already
connected:
Tap c to view the next picture.
Tap d to view the previous picture.
Tap t to view the pictures stored on
the USB device in a slide show.
Tap on the screen to finish the slide
show.
Displaying pictures
Viewing pictures
Viewing the next or previous
picture
Using the picture menu
Tap on the screen to view the picture
in full screen. Tap on the screen again
to leave the full screen mode.
Tap MENU to open the USB Picture
menu.
External devices
37
If you tap on the picture file name
once, a small preview picture is
displayed next to the file list. If you tap
on it a second time or if you select
O under the preview picture, the
picture is displayed in the main menu.
Sort by title
A list with all picture files
alphabetically ordered is displayed.
Picture file list
All lists with picture files are
displayed. Search for the picture you
want to display and select it.
Sort by date
A list with all picture files sorted by
date and starting with the latest date
is displayed.
Slide show time
Adjust the time sequence in which
one picture is shown in a slide show.
Clock/temp. display
If you want the time and temperature
to be displayed in full screen mode,
set Clock/temp. display to On.
Display settings
Adjust the brightness and contrast of
the picture display.
Set Brightness to a value between
-9 and 9.
Set Contrast to a value between -15
and 15.
Playing movies
You can view movies from an
auxiliary device connected to the
AUX input or from a USB device
connected to the USB port.
38
External devices
Note
To use the movie function with your
iPod/iPhone, connect your device to
the AUX port only. A constant
connection cannot be established
via the USB port.
Note
For your safety, the movie function is
not available while driving.
If required, select Source to open a
drop down list and then select AUX
(Movie) to open the respective main
menu.
Playback of the movie files starts
automatically.
Auxiliary device
Activating the AUX function
If the auxiliary device is not yet
connected to the Infotainment
system, connect the device 3 30. The
AUX movie menu is displayed and
playback of the movie files starts
automatically.
In case the auxiliary device is already
connected:
If required, press the ; button and
then select the Gallery screen button
to open the picture or movie main
menu last selected.
Note
Apart from settings such as volume,
tone and display, all functions need
to be operated via the auxiliary
device.
Using the AUX movie menu
Tap MENU to open the AUX Movie
menu.
For detailed information on the
available settings, see the
corresponding descriptions for USB
devices below.
USB device
Activating the USB device function
If the USB device is not yet connected
to the Infotainment system, connect
the device 3 30 and then continue as
described below.
In case the USB device is already
connected:
If required, press the ; button and
then select the Gallery screen button
to open the picture or movie main
menu last selected.
If required, select Source to open a
drop down list and then select USB
(Movie) to open the respective main
menu.
Playback of movie files starts
automatically.
External devices
Fast forwarding and rewinding
Press and hold d or c. Release to
return to the normal playback mode.
Full screen
Tap x to switch to full screen mode.
Tap on the screen again to leave the
full screen mode.
Using the USB movie menu
Tap MENU to open the USB movie
menu.
Interrupting and resuming playback
Tap = to interrupt playback. The
screen button changes to l.
Tap l to resume playback.
39
Movie file list
All lists with movie files are displayed.
Search for the movie you want to
display and select it. The respective
movie starts playing.
Clock/temp. display
If you want the time and temperature
to be displayed in full screen mode,
set Clock/temp. display to On.
Display settings
Adjust the brightness and contrast of
the movie display.
Playing the next or previous track
Tap c to play the next movie file.
Tap d within the first 5 seconds of the
movie playing to return to the
previous movie file.
Returning to the beginning of the
current movie
Tap on d after 5 seconds of the movie
playing.
Set Brightness to a value between
-9 and 9.
40
External devices
Set Contrast to a value between -15
and 15.
Tone settings
For a detailed description 3 16.
Activating or deactivating subtitle and
audio language
If the movie has a subtitle and audio
language, you can activate or
deactivate these options.
Select _ on the right side of the
screen.
To activate or deactivate the subtitle
language, set the Q function to On or
Off.
To activate or deactivate the audio
language, set the R function to On or
Off.
Using smartphone
applications
Before an approved application can
be operated using the controls and
menus of the Infotainment system,
the respective application must be
installed on the smartphone.
Supported applications
Press the ; button and then select
the Apps screen button to open the
respective menu.
The menu shows which smartphone
applications are currently supported
by the Infotainment system, see
"Displaying or hiding application
icons" below.
Find a detailed description of the
respective application on the website
of the corresponding software
producer.
Starting an application
If not yet connected to the
Infotainment system, connect the
smartphone:
■ iPod/iPhone: connect the device to
the USB port 3 30
■ Android phone: establish a
Bluetooth connection 3 45
If not installed, download the
respective application to your
smartphone.
Press the ; button and then select
the Apps screen button to open the
respective menu.
Tap on the screen button of the
desired application. A connection to
the respective application installed on
the connected smartphone is
established.
The main menu of the application is
shown on the display of the
Infotainment system.
Note
Ensure good GPS reception of the
smartphone when using a
navigation application.
External devices
Displaying or hiding application
icons
You can define which of the approved
applications supported by the
Infotainment system are visible and
selectable in the Apps menu.
Select 5 Settings in the bottom line of
the Apps main menu to open the App
settings menu.
Select or deselect the desired
applications and then select the OK
screen button.
41
42
Speech recognition
Speech recognition
General information ..................... 42
Usage .......................................... 42
General information
The Siri Eyes Free feature of the
Infotainment system allows access to
Siri, the speech interpretation and
recognition interface on your iPhone
or iPod. See the user guide of your
iPhone or iPod to find out whether it
supports Siri.
Siri Eyes Free works with most of the
built-in apps on your iPhone or iPod.
You can ask Siri, e.g. to call people,
play music, hear and compose text
messages, dictate emails, hear new
notifications, get directions, or add
reminders. For detailed information,
see the user guide of your iPhone or
iPod.
Important notes
■ In order to use Siri Eyes Free, your
iPhone or iPod needs to be
connected to the Infotainment
system via USB cable 3 30 or via
Bluetooth 3 45.
■ Siri Eyes Free requires 3G or wifi
internet access on your iPhone or
iPod.
■ Siri Eyes Free is not compatible
with the approved smartphone
apps 3 40 supported by the
Infotainment system. That means
you cannot control these apps via
Siri Eyes Free.
Usage
Activating speech recognition
Press w on the right side of the
steering wheel to start a speech
recognition session. A voice
command message is displayed on
the screen.
As soon as a beep is heard, you can
say a command. For information on
the commands supported, see the
operating instructions for your iPhone
or iPod.
Speech recognition
Adjusting the volume of voice
prompts
Press + or - on the right side of the
steering wheel to increase or
decrease the volume of voice
prompts.
Interrupting a voice prompt
As an experienced user, you can
interrupt a voice prompt by selecting
the cancel screen button in the voice
command message.
A beep is heard immediately. You
may now directly state a command
without having to wait.
Deactivating speech recognition
Select x/n on the right side of the
steering wheel. The voice command
message disappears, the speech
recognition session is ended.
43
44
Phone
Phone
General information ..................... 44
Bluetooth connection ................... 45
Emergency call ............................ 48
Operation ..................................... 48
Mobile phones and CB radio
equipment .................................... 53
General information
The Phone portal provides you with
the possibility of having mobile phone
conversations via a vehicle
microphone and the vehicle
loudspeakers as well as operating the
most important mobile phone
functions via the Infotainment system
in the vehicle. To be able to use the
Phone portal, the mobile phone must
be connected to the Infotainment
system via Bluetooth.
Not all Phone functions are supported
by every mobile phone. The usable
phone functions depend on the
relevant mobile phone and network
provider. You can find further
information on this in the operating
instructions for your mobile phone, or
you can enquire about them with your
network provider.
Important information for
operation and traffic safety
9 Warning
Mobile phones have effects on
your environment. For this reason
safety regulations and directions
have been prepared. You should
be familiar with the related
directions before you use the
telephone function.
9 Warning
Use of the hands-free facility while
driving can be dangerous because
your concentration is reduced
when telephoning. Park your
vehicle before you use the handsfree facility. Follow the stipulations
of the country in which you find
yourself at present.
Do not forget to follow the special
regulations that apply in specific
areas and always switch off the
mobile phone if the use of mobile
Phone
phones is prohibited, if
interference is caused by the
mobile phone or if dangerous
situations can occur.
Bluetooth
The Phone portal is certified by the
Bluetooth Special Interest Group
(SIG).
You can find further information about
the specification on the internet at
http://www.bluetooth.com.
Bluetooth connection
Bluetooth is a radio standard for the
wireless connection of e.g. mobile
phones, iPod/iPhone models, or other
devices.
To be able to set up a Bluetooth
connection to the Infotainment
system, the Bluetooth function of the
Bluetooth device has to be activated.
For further information, please
consult the user guide of the
Bluetooth device.
Via the Bluetooth settings menu,
pairing (PIN code exchange between
Bluetooth device and Infotainment
system) and connecting of the
Bluetooth devices to the Infotainment
system are carried out.
Bluetooth settings menu
Press the ; button and then select
the Settings screen button.
Select Connection settings and then
Bluetooth settings to display the
respective menu.
45
Pairing a device
Important information
■ Up to five devices can be paired to
the system.
■ Only one paired device can be
connected to the Infotainment
system at a time.
■ Pairing normally only needs to be
carried out once, unless the device
is deleted from the list of paired
devices. If the device has been
connected previously, the
Infotainment system establishes
the connection automatically.
■ Bluetooth operation considerably
drains the device's battery.
Therefore, connect the device to
the power outlet for charging.
Pairing a new device via the
Bluetooth settings menu
1. Press the ; button and then
select the Settings screen button.
Select Connection settings and
then Bluetooth settings to display
the respective menu.
46
Phone
2. On the Infotainment system: set
the Discoverable function to On to
make the Infotainment system
visible to the Bluetooth device.
On the Bluetooth device: activate
the Bluetooth function and the
discoverability mode.
3. On the Infotainment system:
select Bluetooth device list to
display the respective submenu.
4. On the Infotainment system: tap
on the Search Bluetooth Device
screen button. All discoverable
Bluetooth devices in the
environment are displayed in a
list.
5. Tap on the Bluetooth device you
wish to pair.
6. If SSP (secure simple pairing) is
supported:
Confirm the messages on the
Infotainment system and the
Bluetooth device.
If SSP (secure simple pairing) is
not supported:
On the Infotainment system: an
Info message is displayed asking
you to enter a PIN code on your
Bluetooth device.
On the Bluetooth device: enter the
PIN code and confirm your input.
7. The Infotainment system and the
device are paired.
Note
If the Bluetooth device is
successfully paired, the h symbol
next to the Bluetooth device
indicates that the phone function is
enabled and the y symbol next to
the Bluetooth device indicates that
the Bluetooth music function is
enabled.
Note
The connected device and the
available options are highlighted.
Phone
Note
If the Bluetooth connection fails, a
failure message is displayed on the
screen of the Infotainment system.
8. The phone book is downloaded
automatically to the Infotainment
system. If this function is not
supported by the Bluetooth
device, a corresponding message
is displayed.
Pairing a new device via the Phone
menu
Press the ; button and then select
the Phone screen button.
Confirm the Info message asking
whether you wish to pair a Bluetooth
device. The Bluetooth device list
menu is displayed.
Proceed from step 4 as described
above.
If the device has been successfully
paired, the Phone main menu is
displayed.
47
Select Connection settings, Bluetooth
settings and then Bluetooth device
list to display the respective menu.
Select the Bluetooth device you wish
to connect. The device is connected.
Disconnecting a device
Changing the Bluetooth PIN code
Press the ; button and then select
the Settings screen button.
Select Connection settings, Bluetooth
settings and then Change PIN code
to display the respective menu.
Enter the desired four-digit PIN code.
To delete an entered number, select
⇦.
Confirm your input by selecting OK.
Connecting a paired device
Press the ; button and then select
the Settings screen button.
Press the ; button and then select
the Settings screen button.
Select Connection settings, Bluetooth
settings and then Bluetooth device
list to display the respective menu.
Select the Bluetooth device currently
connected. You are prompted with a
question.
Select Yes to disconnect the device.
Deleting a device
Press the ; button and then select
the Settings screen button.
Select Connection settings, Bluetooth
settings and then Bluetooth device
list to display the respective menu.
Select Del next to the Bluetooth
device. You are prompted with a
question.
Select Yes to delete the device.
48
Phone
Device info
Press the ; button and then select
the Settings screen button.
Select Connection settings, Bluetooth
settings and then Bluetooth device
list to display the respective menu.
The information displayed includes
Device name, Address, and PIN
code.
Emergency call
9 Warning
Connection setup cannot be
guaranteed in all situations. For
this reason you should not rely
exclusively on a mobile phone
when a vitally important
communication (e.g. a medical
emergency) is concerned.
In some networks it may be
necessary for a valid SIM card to
be properly inserted in the mobile
phone.
9 Warning
Bear in mind that you can make
and receive calls with the mobile
phone, if it is in a service area with
a sufficiently strong signal. Under
certain circumstances emergency
calls cannot be made on all mobile
phone networks; it is possible that
they cannot be made when certain
network services and/or telephone
functions are active. You can
enquire about this with the local
network operators.
The emergency call number can
differ depending on the region and
country. Please enquire
beforehand about the correct
emergency call number for the
relevant region.
Making an emergency call
Dial the emergency call number (e.g.
112).
The telephone connection to the
emergency call centre is set up.
Answer when the service personnel
questions you about the emergency.
9 Warning
Do not end the call until you are
requested to do so by the
emergency call centre.
Operation
As soon as a connection via
Bluetooth has been set up between
your mobile phone and the
Infotainment system, you can operate
many functions of your mobile phone
via the Infotainment system.
Note
In the handsfree mode mobile phone
operation continues to be possible,
e.g. taking a call or adjusting the
volume.
After the setup of a connection
between the mobile phone and the
Infotainment system, mobile phone
data is transmitted to the Infotainment
system. This can take some time
depending on the mobile phone and
the amount of data to be transferred.
Phone
During this period, operation of the
mobile phone via the Infotainment
system is possible only to a limited
extent.
Note
Not every mobile phone supports all
functions of the Phone portal.
Therefore deviations from the range
of functions described with these
specific mobile phones are possible.
Phone main menu
Press the ; button and then select
the Phone screen button to display
the respective menu.
Note
The Phone main menu is only
available, if a mobile phone is
connected to the Infotainment
system via Bluetooth. For a detailed
description 3 45.
Many functions of the mobile phone
can now be controlled via the Phone
main menu (and associated
submenus), and via the phone
specific controls on the steering
wheel.
Initiating a phone call
Entering a phone number
Press the ; button and then select
the Phone screen button to display
the respective menu.
Enter a telephone number using the
keypad in the Phone main menu.
To delete one or more entered
characters, tap or long tap on the ⇦
screen button.
Tap on the y screen button or press
the 7 button on the steering wheel to
start dialling.
49
Using the phone book
Note
When pairing a mobile phone with
the Infotainment system via
Bluetooth, the phone book of the
mobile phone is downloaded
automatically.
If the phone book is not downloaded,
consult the operating instructions for
your mobile phone.
Press the ; button and then select
the Phone screen button to display
the respective menu.
Select Phone Book.
50
Phone
Quick search
1. Scroll through the list of phone
book entries.
2. Tap on the contact you wish to
call. A menu with all phone
numbers stored for the selected
contact is displayed.
Select o in the Phone book menu to
display the search tab.
2.
3.
4.
3. Select the desired phone number
to initiate the call.
Search menu
If the phone book contains a great
number of entries, you can
conveniently search for the desired
contact via the search menu.
As on a telephone or mobile phone,
the letters are organised in
alphabetical groups on the screen
buttons: abc, def, ghi, jkl, mno, pqrs,
tuv, and wxyz.
Use ⇦ to delete an entered group of
letters.
1. Select the button containing the
first letter of the contact you wish
to search for.
For example: If the contact you
wish to search for starts with 'g'
select the ghi screen button.
5.
All contacts containing one of the
letter on this button, in this case
'g', 'h', and 'i', are displayed.
Select the button containing the
second letter of the contact you
wish to search for.
Continue to enter more letters of
the contact you wish to search for
until the desired contact is
displayed.
Tap on the contact you wish to
call. A menu with all phone
numbers stored for the selected
contact is displayed.
Select the desired phone number
to initiate the call. The following
display is shown.
Phone
51
Select the desired entry to initiate a
call.
Redialling a number
The last dialled phone number can be
redialled.
Press the ; button and then select
the Phone screen button to display
the respective menu.
Tap y for a few seconds. The number
last dialled is redialled.
Using the call history
All incoming, outgoing, or missed
calls are registered.
Press the ; button and then select
the Phone screen button to display
the respective menu.
Select Call History to display the
respective menu.
Select a for outgoing calls, b for
missed calls and c for incoming calls.
The respective call list is displayed.
Using speed dial numbers
Speed dial numbers that are stored
on the mobile phone can also be
dialled using the keypad of the
Phone main menu.
Press the ; button and then select
the Phone screen button to display
the respective menu.
Enter the desired speed dial number:
If the speed dial number consists of
one digit, a long tap on the respective
digit initiates the call.
If the speed dial number consists of
two digits, tap on the first digit and
then long tap on the second digit to
initiate the call.
52
Phone
Incoming phone call
Taking a call
If an audio mode, e.g. the radio or
USB mode, is active at the moment a
call comes in, the audio source is
muted and stays muted until the call
ends.
A message with the caller's phone
number or name (if available) is
displayed.
Rejecting a call
To reject the call, select the Reject
screen button in the message or
press n on the steering wheel.
Functions during a call
During an ongoing phone call the
Phone main menu is displayed.
Changing the ring tone
Press the ; button and then select
the Settings screen button.
Select Connection settings and then
Change ringtone to display the
respective menu. A list of ring tones is
displayed.
Deactivating the handsfree mode
temporarily
To continue the conversation via the
mobile phone, select m.
To return to the handsfree mode,
select m again.
To answer the call, select the Accept
screen button in the message or
press 7 on the steering wheel.
Select one of the ring tones.
For a detailed description on the
Ringtone volume 3 17.
Note
If activated, the corresponding
symbol is highlighted.
Phone
Deactivating the microphone
temporarily
To mute the microphone, select n.
To reactivate the microphone, select
n again.
Note
If activated, the corresponding
symbol is highlighted.
Ending a phone call
Select J to end the call.
Mobile phones and CB
radio equipment
Installation instructions and
operating guidelines
The vehicle specific installation
instructions and the operating
guidelines of the mobile phone and
handsfree manufacturer must be
observed when installing and
operating a mobile telephone. Failure
to do so could invalidate the vehicle
type approval (EU directive 95/54/
EC).
Recommendations for fault-free
operation:
■ Professionally installed exterior
antenna to obtain the maximum
range possible,
■ Maximum transmission power
10 watts,
■ Installation of the phone in a
suitable spot, consider relevant
Note in the Owner's Manual,
section Airbag system.
Seek advice on predetermined
installation points for the external
antenna or equipment holder and
ways of using devices with a
transmission power exceeding
10 watts.
Use of a handsfree attachment
without external antenna with mobile
telephone standards GSM
900/1800/1900 and UMTS is only
permitted if the maximum
transmission power of the mobile
telephone is 2 watts for GSM 900 or
1 watt for the other types.
53
For reasons of safety, do not use the
phone while driving. Even use of a
handsfree set can be a distraction
while driving.
9 Warning
Operation of radio equipment and
mobile telephones which fail to
meet above mentioned mobile
telephone standards is only
permitted using an antenna
located outside of the vehicle.
Caution
Mobile telephones and radio
equipment may lead to
malfunctions in the vehicle
electronics when operated inside
the vehicle with no exterior
antenna, unless the above
mentioned regulations are
observed.
54
Index
A
Activating AUX audio.................... 33
Activating AUX movie................... 37
Activating Bluetooth music........... 33
Activating iPod audio.................... 33
Activating phone........................... 48
Activating radio............................. 20
Activating USB audio.................... 33
Activating USB movie................... 37
Activating USB picture.................. 36
Apps....................................... 30, 40
Audio files..................................... 30
Autostore lists............................... 21
Retrieving stations..................... 21
Storing stations......................... 21
Auto volume.................................. 17
AUX
AUX audio menu....................... 33
AUX movie menu...................... 37
Connecting device.................... 30
General information................... 30
B
Basic operation............................. 13
Bluetooth
Bluetooth connection................ 45
Bluetooth music menu.............. 33
Connecting device.................... 30
General information................... 30
Pairing....................................... 45
Phone........................................ 48
Bluetooth connection.................... 45
C
Call
Functions during a call.............. 48
Incoming call............................. 48
Initiating a phone call................ 48
Ring tone................................... 48
Call history.................................... 48
Category list.................................. 22
Control elements
Infotainment system.................... 8
Steering wheel............................ 8
Control elements overview............. 8
D
DAB.............................................. 26
Date settings................................. 10
Digital audio broadcasting............ 26
Displaying pictures....................... 36
Display settings...................... 36, 37
Dynamic range compression........ 26
E
Emergency call............................. 48
EPG.............................................. 26
55
F
Favourite lists............................... 22
Retrieving stations..................... 22
Storing stations......................... 22
File formats
Audio files.................................. 30
Movie files................................. 30
Picture files................................ 30
Frequency band............................ 26
G
General information.......... 30, 42, 44
Apps.......................................... 30
AUX........................................... 30
Bluetooth................................... 30
DAB........................................... 26
Infotainment system.................... 6
Phone........................................ 44
Smartphone applications.......... 30
USB........................................... 30
H
Home menu.................................. 13
I
Infotainment control panel.............. 8
Intellitext....................................... 26
iPod
Connecting device.................... 30
General information................... 30
iPod audio menu....................... 33
L
Language..................................... 10
M
Maximum startup volume............. 17
Menu operation............................. 13
Mobile phones and CB radio
equipment ................................ 53
Movie files..................................... 30
Mute.............................................. 10
N
Navigation..................................... 40
O
Operation...................................... 48
External devices........................ 30
Menu......................................... 13
Phone........................................ 48
Radio......................................... 20
P
Pairing.......................................... 45
Phone
Bluetooth................................... 44
Bluetooth connection................ 45
Call history................................ 48
Emergency calls........................ 48
Entering a number.................... 48
Functions during a call.............. 48
General information................... 44
Incoming call............................. 48
Phone book............................... 48
Phone main menu..................... 48
Selecting the ring tone.............. 48
Speed dial number.................... 48
Phone book.................................. 48
Picture files................................... 30
Playing audio................................ 33
Playing movies............................. 37
R
Radio
Activating................................... 20
Autostore lists............................ 21
Category list.............................. 22
Configuring DAB....................... 26
Configuring RDS....................... 24
DAB announcements................ 26
Digital audio broadcasting
(DAB)........................................ 26
Dynamic range compression..... 26
EPG current programme........... 26
EPG station list.......................... 26
Favourite lists............................ 22
Frequency band........................ 26
56
Intellitext.................................... 26
Radio data system (RDS)......... 24
Regional.................................... 24
Regionalisation......................... 24
Retrieving stations.............. 21, 22
Selecting the waveband............ 20
Station lists................................ 22
Station search........................... 20
Station tuning............................ 20
Storing stations................... 21, 22
TP volume................................. 24
Traffic announcements............. 24
Updating station lists................. 22
Usage........................................ 20
Waveband menus..................... 22
Radio data system (RDS) ............ 24
Radio factory settings................... 10
RDS.............................................. 24
Regional....................................... 24
Regionalisation............................. 24
Retrieving stations.................. 21, 22
Ring tone
Changing the ring tone.............. 48
Ring tone volume...................... 17
S
Siri Eyes Free............................... 42
Smartphone............................ 30, 40
Speech recognition....................... 42
Speed dial numbers..................... 48
Station lists................................... 22
Station search............................... 20
Steering wheel audio controls........ 8
Storing stations....................... 21, 22
Switching the Infotainment
system on.................................. 10
System settings............................ 18
Language.................................. 10
Radio factory settings................ 10
Text scroll.................................. 10
Time and date........................... 10
Vehicle settings......................... 10
Menu......................................... 13
Phone........................................ 48
Radio......................................... 20
USB........................................... 30
USB
Connecting device.................... 30
General information................... 30
USB audio menu....................... 33
USB movie menu...................... 37
USB picture menu..................... 36
Using smartphone applications.... 40
T
Vehicle settings............................ 10
Voice recognition.......................... 42
Volume
Auto volume.............................. 17
Maximum startup volume.......... 17
Mute function............................. 10
Ring tone volume...................... 17
Setting the volume.................... 10
Speed compensated volume.... 17
Touch beep volume.................. 17
TP volume................................. 17
Volume limitation at high
temperatures............................. 10
Volume settings............................ 17
Text scroll..................................... 10
Theft-deterrent feature ................... 7
Time settings................................ 10
Tone settings................................ 16
Touch beep volume...................... 17
TP volume.................................... 17
Traffic announcements
Activating................................... 24
TP volume................................. 24
U
Updating station lists.................... 22
Usage............................... 10, 20, 42
AUX........................................... 30
Bluetooth................................... 30
iPod........................................... 30
V
57
W
Waveband menus......................... 22
Waveband selection..................... 20
58
CD 3.0 BT / R 3.0
Introduction .................................. 60
Radio ........................................... 73
CD Player .................................... 81
AUX input ..................................... 84
USB port ...................................... 85
Bluetooth music ........................... 88
Phone .......................................... 90
Index ............................................ 98
60
Introduction
Introduction
General information ..................... 60
Theft-deterrent feature ................. 61
Control elements overview .......... 62
Usage .......................................... 66
Basic operation ............................ 68
Tone settings ............................... 70
Volume settings ........................... 71
General information
The Infotainment system provides
you with state-of-the-art in-car
infotainment.
Using the radio tuner functions, you
may register up to 36 stations on
six favourites pages.
The integrated audio player will
entertain you with audio CDs and
MP3/WMA CDs.
You can connect external data
storage devices, e.g. iPod, MP3
player, USB stick, or a portable CD
player to the Infotainment system as
further audio sources; either via cable
or via Bluetooth.
In addition, the Infotainment system is
equipped with a Phone portal that
allows for comfortable and safe use of
your mobile phone in the vehicle.
Optionally, the Infotainment system
can be operated using controls on the
steering wheel.
The well-thought-out design of the
control elements and the clear
displays enable you to control the
system easily and intuitively.
Note
This manual describes all options
and features available for the
various Infotainment systems.
Certain descriptions, including those
for display and menu functions, may
not apply to your vehicle due to
model variant, country
specifications, special equipment or
accessories.
Important information on
operation and traffic safety
9 Warning
The Infotainment system must be
used so that the vehicle can be
driven safely at all times. If in
doubt, stop the vehicle and
operate the Infotainment system
while the vehicle is stationary.
Introduction
Radio reception
Radio reception may be disrupted by
static, noise, distortion or loss of
reception due to:
■ changes in distance from the
transmitter
■ multipath reception due to
reflection
■ shadowing
Theft-deterrent feature
The Infotainment system is equipped
with an electronic security system for
the purpose of theft deterrence.
The Infotainment system therefore
functions only in your vehicle and is
worthless to a thief.
61
62
Introduction
Control elements overview
Control panel CD 3.0 BT
Introduction
1
m VOL
8
FAV 1-2-3
9
Radio favourites and
autostore lists ........................ 75
MEDIA
Press: switch on/off
Infotainment system .............. 66
2
3
Turn: adjust volume .............. 66
Display
MENU-TUNE
4
5
Central control for
selection and navigation in
menus ................................... 68
AUX input .............................. 84
P BACK
Menu: one level back ............ 68
6
Input: delete last character
or entire entry ........................ 68
CONFIG
7
System settings ..................... 66
u
Radio: search forwards ......... 73
CD/MP3/WMA: skip track
forwards ................................ 82
Activate media or change
audio source ......................... 66
10 TP
Activate or deactivate
radio traffic service ................ 77
11 RADIO
Activate radio or change
waveband .............................. 73
12 TONE
Tone settings ........................ 70
13 s
Radio: search backwards ..... 73
CD/MP3/WMA: skip track
backwards ............................. 82
63
14 INFO
Radio: Information about
the current station
CD/MP3/WMA:
Information about the
current track
15 y / @
Open telephone main menu . 90
or activate/deactivate
mute function ........................ 66
16 Disc slot
17 d
Eject disc ............................... 82
18 Radio station buttons 1 - 6
Long press: save station ....... 75
Short press: select station .... 75
64
Introduction
Control panel R 3.0
Introduction
1
m VOL
9
Press: switch on/off
Infotainment system .............. 66
Activate auxiliary device ........ 66
10 TP
2
3
Turn: adjust volume .............. 66
Display
MENU-TUNE
Activate or deactivate
radio traffic service ................ 77
11 RADIO
4
5
Central control for
selection and navigation in
menus ................................... 68
AUX input .............................. 84
P BACK
Activate radio or change
waveband .............................. 73
12 TONE
Menu: one level back ............ 68
6
Input: delete last character
or entire entry ........................ 68
CONFIG
7
System settings ..................... 66
u
8
Search forwards .................... 73
FAV 1-2-3
Radio favourites and
autostore lists ........................ 75
AUX
Tone settings ........................ 70
13 s
Search backwards ................ 73
14 INFO
65
Steering wheel audio controls
1
7
Short press: take phone call . 90
or activate redial function ...... 93
Information about the
current radio station
15 @
or dial number in call list ....... 93
Activate/deactivate mute
function ................................. 66
16 Radio station buttons 1 - 6
or switch handsfree mode
on/off ..................................... 93
SRC (Source) ........................ 66
Long press: save station ....... 75
Short press: select station .... 75
Long press: open call list ...... 93
2
Press: select audio source .... 66
66
Introduction
With radio active: turn
upwards/downwards to
select next/previous
preset radio station ............... 73
With CD player active: turn
upwards/downwards to
select next/previous CD/
MP3/WMA track .................... 82
With Phone portal active
and call list open (see
item 1): turn upwards/
downwards to select next/
previous entry in call list ........ 93
3
With Phone portal active
and calls waiting: turn
upwards/downwards to
switch between calls ............. 93
+
4
Increase volume
-
5
Reduce volume
xn
Press: end/decline call .......... 93
or close call list ...................... 93
or activate/deactivate
mute function ........................ 66
Usage
Control elements
The Infotainment system is operated
via function buttons, a MENU-TUNE
knob and menus shown on the
display.
Inputs are made via the control panel
on the Infotainment system 3 62
Optionally they are made via the
audio controls on the steering wheel
3 62.
Switching the Infotainment
system on or off
Press the X VOL knob briefly. After
switching on, the last selected
Infotainment source becomes active.
Press X VOL again to turn the system
off.
Automatic switch-off
If the Infotainment system is switched
on pressing X VOL while the ignition
is turned off, it will switch off again
automatically 10 minutes after the last
user input.
Introduction
Setting the volume
Turn m VOL. The current setting is
shown on the display.
When the Infotainment system is
switched on, the last selected volume
is set, provided this setting is lower
than the maximum startup volume
(see below).
The following inputs can be made
separately:
■ the maximum startup volume
3 71
■ the volume of traffic
announcements 3 71
Speed compensated volume
When speed compensated volume is
activated 3 71, the volume is
adapted automatically to make up for
the road and wind noises as you
drive.
Mute function
Press y / @ or @ (if Phone portal is
available: press for a few seconds) to
mute the audio sources.
To cancel the mute function: turn m
VOL or press y / @ (if Phone portal is
available: press for a few seconds) or
press @ again.
Volume limitation at high
temperatures
At very high temperatures inside the
vehicle the Infotainment system limits
the maximum adjustable volume. If
necessary, the volume is decreased
automatically.
Modes of operation
Radio
Press RADIO to open the radio main
menu or to change between the
different wavebands.
Press MENU-TUNE to open the
waveband menus with options for the
station selection.
For a detailed description of the radio
functions 3 73.
Audio players
R 3.0
Press AUX to activate the AUX mode.
67
CD 3.0 BT
Press MEDIA once or several times to
open the CD, USB, iPod or AUX main
menu or to switch between these
menus.
Press MENU-TUNE to open the
relevant menus with options for the
track selection.
For a detailed description of CD
player functions 3 81, AUX
functions 3 84, USB port functions
3 85 and Bluetooth music functions
3 88.
Phone
Press y / @ briefly to open the
telephone menu.
Press MENU-TUNE to open the
phone menu with options for the input
and selection of numbers.
For a detailed description of the
Phone portal 3 90.
68
Introduction
System settings
Adjusting the language
The menu texts on the Infotainment
system's display can be displayed in
various languages.
Press CONFIG to open the Settings
menu.
Select the Languages menu item in
the Settings menu to display the
respective menu.
Choose the desired language for the
menu texts.
Note
For a detailed description of menu
operation 3 68.
Time and date settings
Find a detailed description in your
Owner's Manual.
Vehicle settings
Find a detailed description in your
Owner's Manual.
Other settings
Find a detailed description for all
other settings in the relevant
chapters.
Restore factory settings
All settings, e.g. the volume and tone
settings, the favourite lists, or the
Bluetooth device list, can be reset to
the factory defaults.
Press CONFIG to open the Settings
menu. Select Vehicle settings and
then Restore factory settings.
The submenu prompts you with a
question. To reset all values to the
factory defaults, select Yes.
Basic operation
MENU-TUNE knob
The MENU-TUNE knob is the central
control element for the menus.
Turn MENU-TUNE:
■ to mark a menu option
■ to set a numeric value
Press MENU-TUNE:
■ to select or activate the marked
option
■ to confirm a set value
■ to switch a system function on/off
P BACK button
Press the P BACK button briefly:
■ to exit a menu
■ to return from a submenu to the
next higher menu level
■ to delete the last character in a
character sequence
Press and hold P BACK for a few
seconds to delete the entire entry.
Introduction
Examples of menu operation
Activating a setting
Selecting an option
69
The cursor then switches to the next
value. If all values are set, you are
automatically returned to the next
higher menu level.
Adjusting a setting
Turn MENU-TUNE to move the
cursor (= coloured background) to the
desired option.
Press MENU-TUNE to select the
marked option.
Submenus
An arrow on the right-hand edge of
the menu indicates that after
selection of the option a submenu
with further options will be opened.
Turn MENU-TUNE to mark the
desired setting.
Press MENU-TUNE to activate the
setting.
Setting a value
Turn MENU-TUNE to adjust the
setting.
Press MENU-TUNE to confirm the
setting.
Switching a function on or off
Turn MENU-TUNE to change the
current value of the setting.
Press MENU-TUNE to confirm the set
value.
Turn MENU-TUNE to mark the
function to be switched on or off.
70
Introduction
Press MENU-TUNE to switch
between the settings On and Off.
Entering a character sequence
To enter character sequences, e.g.
PIN codes or telephone numbers:
Turn MENU-TUNE to mark the
desired character.
Press MENU-TUNE to confirm the
marked character.
The last character in the character
sequence can be deleted by selecting
k on the display or pressing P
BACK. Pressing and holding P
BACK deletes the entire entry.
To change the position of the cursor
in the character sequence already
entered, select ◀ or ▶ on the display.
Tone settings
In the tone settings menu the tone
characteristics can be set differently
for each radio waveband and each
audio player source.
Press TONE to open the tone settings
menu.
Setting bass, midrange, and
treble
Scroll through the list and select
Bass, Midrange or Treble.
Set the desired value for the selected
option.
Setting the volume distribution
between front and rear
Scroll through the list and select
Fader.
Set the desired value.
Setting the volume distribution
between right and left
Scroll through the list and select
Balance.
Set the desired value.
Introduction
Selecting a tone style
Scroll through the list and select EQ
(Equaliser). The EQ presets menu is
displayed.
Volume settings
Adjusting the speed
compensated volume
Press CONFIG to open the Settings
menu.
Select Radio settings and then Auto
volume control.
The displayed options offer optimised
bass, middle, and treble presettings
for the relevant style of music.
Select the desired option.
Setting an individual setting to
"0"
Select the desired option and press
MENU-TUNE for a few seconds.
The value is reset to "0".
Setting all settings to "0" or
"OFF"
Press TONE for a few seconds.
All values are reset to "0", the EQ
preset is set to "OFF".
71
The Auto volume control function can
be deactivated or the degree of the
volume adaptation can be selected in
the menu displayed.
Select the desired option.
Set the desired value.
Adjusting the volume of traffic
announcements
The volume of traffic announcements
can be preset to increase or decrease
in proportion to the normal audio
volume.
Press CONFIG to open the Settings
menu.
Select Radio settings, RDS options
and then TA volume.
Adjusting the maximum startup
volume
Press CONFIG to open the Settings
menu.
Select Radio settings and then
Maximum startup volume.
Set the desired value.
72
Introduction
Adjusting the volume of the ring
tone
Press CONFIG to open the Settings
menu.
Select Phone settings, Sound &
Signals and then Ring Volume.
Set the desired value.
Radio
Radio
Usage
Activating the radio
Usage .......................................... 73
Station search .............................. 73
Autostore lists .............................. 74
Favourite lists ............................... 75
Waveband menus ........................ 75
Radio data system (RDS) ............ 77
Digital audio broadcasting ........... 79
Press RADIO to open the radio main
menu.
The station last played will be
received.
Selecting the waveband
Press RADIO once or several times to
select the desired waveband.
The station last played in that
waveband will be received.
Station search
Automatic station search
Briefly press s or u to play the
next station in the station memory.
73
Manual station search
Press and hold s or u. Release
when the required frequency has
almost been reached on the
frequency display.
A search is made for the next station
that can be received and it is played
automatically.
Note
Manual station search: If the radio
does not find a station, it switches
automatically to a more sensitive
search level. If it still does not find a
station, the frequency that was last
active is set again.
Note
FM waveband: when the RDS
function is activated, only RDS
stations 3 77 are searched for, and
when the radio traffic service (TP) is
activated, only traffic service
stations 3 77 are searched for.
Manual station tuning
In the radio main menu, press
MENU-TUNE to open the respective
waveband menu and select manual
tuning.
74
Radio
On the pop-up frequency display, turn
MENU-TUNE and set the optimal
reception frequency.
Autostore lists
The stations received best in a
waveband can be searched for and
stored automatically via the autostore
function.
Each waveband has 2 autostore lists
(AS-Stations 1, AS-Stations 2), in
each of which 6 stations can be
stored.
Note
The currently received station is
marked by i.
Automatic station storing
Press and hold FAV 1-2-3 pressed
until an autostore message is
displayed. The 12 strongest stations
in the current waveband will be stored
in the 2 autostore lists.
To cancel the autostore procedure,
press MENU-TUNE.
Storing stations manually
Stations can also be stored manually
in the autostore lists.
Set the station to be stored.
Briefly press FAV 1-2-3 once or
several times to switch to the desired
list.
To store the station in a list position:
press the corresponding station
button 1...6 until a confirmation
message is displayed.
Note
Manually stored stations are
overwritten in an automatic station
storing process.
Note
To operate this function, the ASStations function must be activated
(see below).
Retrieving a station
Briefly press FAV 1-2-3 once or
several times to switch to the desired
list.
Briefly press one of the station
buttons 1...6 to open the station at the
corresponding list position.
Note
To operate this function, the ASStations function must be activated
(see below).
Activating the autostore stations
function
Press CONFIG to open the Settings
menu.
Select Radio settings and then ASStations to open the respective menu.
Set the autostore stations for the
respective waveband to On.
Radio
Favourite lists
Stations of all wavebands can be
stored manually in the favourite lists.
Retrieving a station
Briefly press FAV 1-2-3 once or
several times to switch to the desired
list.
Briefly press one of the station
buttons 1...6 to open the station at the
corresponding list position.
Defining the number of available
favourite lists
6 stations can be stored in each
favourite list. The number of available
favourite lists can be set (see below).
Note
The currently received station is
marked by i.
Press CONFIG to open the Settings
menu.
Select Radio settings and then Radio
favourites to open the menu Max.
number of favourites pages.
75
Waveband menus
Alternative facilities for station
selection are available via waveband
specific menus.
Note
The following displays are shown as
examples.
Stations lists
When in a radio main menu, turn
MENU-TUNE to open the stations list
of the respective waveband.
The receivable radio stations in the
current reception area are displayed.
Storing a station
Set the station to be stored.
Briefly press FAV 1-2-3 once or
several times to switch to the desired
list.
To store the station in a list position:
press the corresponding station
button 1...6 until a confirmation
message is displayed.
Select the desired number of
available favourite lists.
Note
If no station list has been created
beforehand, the Infotainment
system performs an automatic
station search.
Select the desired station.
76
Radio
Note
The currently received station is
marked by i.
Updating the stations lists
When in a radio main menu, press
MENU-TUNE to open the relevant
waveband menu.
If the stations stored in the wavebandspecific station list can no longer be
received:
Select the respective menu item to
update the station list in the
respective waveband menu, e.g.
Update FM station list.
A station search is started. Once the
search is completed, the station last
received will be played.
To cancel the station search: press
MENU-TUNE.
Note
If the Infotainment system features a
dual tuner, the stations lists are
continuously updated in the
background. No manual update is
required.
Note
If a waveband-specific station list is
updated, the corresponding
category list is also updated.
Favourites list
While in a radio main menu, press
MENU-TUNE to open the relevant
waveband menu.
Select Favourites list. All stations
saved in the favourite lists are
displayed.
Select the desired station.
Note
The currently received station is
marked by i.
Category lists
Numerous radio stations broadcast a
PTY code, which specifies the type of
programme transmitted (e.g. news).
Some stations also change the PTY
code depending on the content
currently being transmitted.
The Infotainment system stores these
stations, sorted by programme type,
in the corresponding category list.
To search for a programme type
determined by station: select the
waveband specific category list
option.
A list of programme types currently
available is displayed.
Select the desired programme type.
A list of stations is displayed that
transmit a programme of the selected
type.
Radio
77
Advantages of RDS
Select the desired station.
The category list is updated, too,
when the corresponding waveband
specific station list is updated.
Activate the desired announcement
categories.
Several announcement categories
can be selected at the same time.
Note
The currently received station is
marked by i.
Note
DAB announcements can only be
received if the DAB waveband is
activated.
DAB announcements
Besides their music programmes,
numerous DAB stations 3 79
broadcast various announcement
categories.
The currently received DAB service
(programme) is interrupted when any
announcement of previously
activated categories is pending.
Activating announcement categories
When in the DAB menu, select DAB
announcements to display the
respective menu.
Radio data system (RDS)
RDS is a service of FM stations that
considerably facilitates the finding of
the desired station and its fault-free
reception.
■ On the display, the programme
name of the set station appears
instead of its frequency.
■ During a station search, the
Infotainment system tunes in to
RDS stations only.
■ The Infotainment system always
tunes into the best receivable
broadcasting frequency of the set
station by means of AF (Alternative
Frequency).
■ Depending on the station that is
received, the Infotainment system
displays radio text that can contain
e.g. information about the current
programme.
Configuring RDS
Press CONFIG to open the Settings
menu.
Select Radio settings and then RDS
options.
78
Radio
If regionalisation is switched off,
alternative frequencies of the stations
are selected without regard to
regional programmes.
Set the option RDS to On or Off.
Note
If RDS is switched off, it will be
automatically switched on again
when a radio station is changed (by
search function or preset button).
Note
The following options are only
available, if RDS is set to On.
RDS options
Switching regionalisation on and off
At certain times, some RDS stations
broadcast regionally different
programmes on different frequencies.
Set the option Regional to On or Off.
If regionalisation is switched on, only
alternative frequencies (AF) with the
same regional programmes are
selected.
RDS scrolling text
Some RDS stations hide the
programme name in the display line
in order to display additional
information.
To prevent additional information
being displayed:
Set Text scroll freeze to On.
TA volume
The volume of traffic announcements
(TA) can be preset. For a detailed
description 3 71.
Radio traffic service
(TP = Traffic Programme)
Radio traffic service stations are RDS
stations that broadcast traffic news.
Switching the radio traffic service on
and off
To switch the traffic announcement
standby facility of the Infotainment
system on and off:
Press the TP button.
■ If the radio traffic service is
switched on, [ ] is displayed in the
radio main menu.
■ Only radio traffic service stations
are received.
■ If the current station is not a radio
traffic service station, a search is
started automatically for the next
radio traffic service station.
■ If a radio traffic service station has
been found, [TP] is displayed in the
radio main menu.
■ Traffic announcements are played
at the preset TA volume 3 71.
■ If the radio traffic service is
switched on, CD/MP3 replay is
interrupted for the duration of the
traffic announcement.
Listening to traffic announcements
only
Switch on the radio traffic service and
completely turn down the volume of
the Infotainment system.
Radio
Blocking out traffic announcements
To block out a traffic announcement,
e.g. during CD/MP3 replay:
Press the TP button or the
MENU-TUNE knob to confirm the
cancelling message on the display.
The traffic announcement is
cancelled, but the radio traffic service
remains switched on.
Digital audio broadcasting
Digital audio broadcasting (DAB) is
an innovative and universal
broadcast system.
DAB stations are indicated by the
programme name instead of the
broadcasting frequency.
General information
■ With DAB, several radio
programmes (services) can be
broadcasted on a single frequency
(ensemble).
■ Besides high-quality digital audio
services, DAB is also able to
transmit programme-associated
data and a multitude of other data
services including travel and traffic
information.
■ As long as a given DAB receiver
can pick up the signal sent out by a
broadcasting station (even if the
signal is very weak), sound
reproduction is ensured.
■ There is no fading (weakening of
the sound that is typical of AM or
FM reception). The DAB signal is
reproduced at a constant volume.
■ If the DAB signal is too weak to be
picked up by the receiver, reception
is interrupted completely. This
incident can be avoided by
activating Auto ensemble linking
and/or Auto linking DAB-FM in the
DAB settings menu.
79
■ Interference caused by stations
that are on nearby frequencies (a
phenomenon that is typical of AM
and FM reception) does not occur
with DAB.
■ If the DAB signal is reflected by
natural obstacles or buildings, the
reception quality of DAB is
improved, whereas AM or FM
reception is considerably impaired
in such cases.
■ When DAB reception is enabled,
the FM tuner of the Infotainment
system remains active in the
background and continually
searches for the best receivable FM
stations. If TP 3 77 is activated,
traffic announcements of the FM
station with the strongest signal are
issued. Deactivate TP, if DAB
reception should not be interrupted
by FM traffic announcements.
Configuring DAB
Press CONFIG.
Select Radio settings and then DAB
settings.
80
Radio
The following options are available in
the configuration menu:
Auto ensemble linking
With this function activated, the
device switches over to the same
service (programme) on another DAB
ensemble (frequency) when the DAB
signal is too weak to be picked up by
the receiver.
Set the function to On or Off.
Auto linking DAB-FM
With this function activated, the
device switches over to a
corresponding FM station of the
active DAB service when the DAB
signal is too weak to be picked up by
the receiver.
Set the function to On or Off.
Dynamic audio adaption
With this function activated, the
dynamic range of the DAB signal is
reduced. That means the level of the
loud sounds is reduced and the level
of the quiet sounds is increased.
Therefore, the volume of the
Infotainment system can be raised to
a point where the quiet sounds are
audible, without the loud sounds
being too loud.
Set the function to On or Off.
Band selection
Select the menu item Band selection
to display the respective menu.
To define which DAB wavebands are
to be received by the Infotainment
system, activate one of the options:
L-Band: 1452 - 1492 MHz, earth and
satellite radio
Band III: 174 - 240 MHz, earth radio
Both
CD Player
CD Player
General information ..................... 81
Usage .......................................... 82
General information
The Infotainment system's CD player
can play audio CDs and MP3/WMA
CDs.
Important information
Caution
Under no circumstances place
single-CDs with a diameter of
8 cm or shaped CDs in the audio
player.
You must not put any stickers on
CDs. These discs can get jammed
in the CD drive and ruin the player.
Replacement of the device will
then be necessary.
■ The following CD formats can be
used:
CD-ROM Mode 1 and Mode 2.
CD-ROM XA Mode 2, Form 1 and
Form 2.
■ The following file formats can be
used:
■
■
■
■
81
ISO 9660 Level 1, Level 2 (Romeo,
Joliet).
MP3 and WMA files written in any
format other than listed above may
not play correctly and their file
names and folder names may not
be displayed correctly.
Audio CDs with copy protection,
which are not in compliance with
the audio CD standard, may not
play correctly or not at all.
Self-recorded CD-Rs and CD-RWs
are more vulnerable to mishandling
than prerecorded CDs. Correct
handling, especially in the case of
self-recorded CD-Rs and CD-RWs,
must be ensured (see below).
Self-recorded CD-Rs and CD-RWs
may not play correctly or not at all.
In such cases it is not the
equipment that is at fault.
On mixed mode CDs (audio tracks
and compressed files, e.g. MP3),
the audio tracks part and the
compressed files part can be
played separately.
82
CD Player
■ Avoid leaving fingerprints when you
change CDs.
■ Put CDs back in their sleeves
immediately after removing them
from the CD player in order to
protect them from damage and dirt.
■ Dirt and liquids on CDs can smear
the lens of the CD player inside the
device and cause faults.
■ Protect CDs from heat and direct
sunlight.
■ The following restrictions apply to
MP3/WMA CDs:
Bit rate: 8 kbit/s - 320 kbit/s
Sampling frequency: 48 kHz,
44.1 kHz, 32 kHz (for MPEG-1) and
24 kHz, 22.05 kHz, 16kHz (for
MPEG-2)
■ The following restrictions apply to
the data stored on an MP3/WMA
CD:
Number of tracks: max. 999
Number of tracks per folder level:
max. 512
Folder structure depth: max.
10 levels
Note
This chapter deals only with playing
MP3 files since the operation for
MP3 and WMA files is identical.
When a CD with WMA files is loaded
MP3 related menus are displayed.
Usage
Starting CD replay
Press MEDIA once or several times to
open the CD or MP3 main menu.
Inserting a CD
Insert a CD with the printed side
facing up into the CD slot until it is
drawn in.
Note
If a CD is inserted, 0 is shown on the
display.
Skipping to the next or previous
track
Briefly press s or u.
Fast forward or rewind
Press and hold s or u them
down to fast forward or rewind the
current track.
If there is a CD in the CD player, CD
playback is started.
Depending on the data stored on the
audio CD or MP3 CD, differing
information about the CD and the
current music track will be shown on
the display.
Selecting tracks using the audio
CD menu
Press MENU-TUNE to open the CD
menu.
CD Player
Shuffle songs
To play all tracks in a random order:
set this function to On.
Search...
To open a menu for track search and
selection: select Search....
Note
If this function is activated, 2 is
shown in the respective main menu.
Repeat
To repeatedly listen to a track: set this
function to On.
Note
If this function is activated, 1 is
shown in the respective main menu.
Track list
To select a track on the CD: select
Track list and then select the desired
track.
Folders
To select a track from a folder: select
Folders. A list of the folders stored on
the CD is displayed.
Select one of the folders and then
select the desired track.
Note
This menu item is only available if an
MP3 CD is inserted.
Select one of the categories and then
select the desired track.
Note
This menu item is only available, if
an MP3 CD is inserted.
Removing a CD
Press d.
The CD is pushed out of the CD slot.
If the CD is not removed after
ejection, it will be drawn back in again
automatically after a few seconds.
83
84
AUX input
AUX input
General information ..................... 84
Usage .......................................... 84
General information
On the control panel of the
Infotainment system 3 62, there is an
AUX input for the connection of
external audio sources.
It is possible, for example, to connect
a portable CD player with a 3.5 mm
jack plug to the AUX input.
Note
The socket must always be kept
clean and dry.
Usage
CD 3.0 BT
Press MEDIA once or several times to
activate the AUX mode.
R 3.0
Press AUX to activate the AUX mode.
Turn m VOL of the Infotainment
system to adjust the volume.
All other functions can be operated
only via the control elements of the
audio source.
USB port
USB port
General information ..................... 85
Playing saved audio files ............. 86
General information
In the centre console below the
climate controls there is a USB socket
for the connection of external audio
data sources.
Note
The socket must always be kept
clean and dry.
An MP3 player, USB drive, SD card
(via USB connector/adapter), or iPod
can be connected to the USB port.
When connected to the USB port,
various functions of the above
devices can be operated via the
controls and menus of the
Infotainment system.
Note
Not all MP3 player, USB drive, SD
card or iPod models are supported
by the Infotainment system.
Important information
■ The external devices connected to
the USB port must comply with the
USB Mass Storage Class
specification (USB MSC).
85
■ Devices connected via USB are
supported according to USB
Specification V 2.0. Maximum
supported speed: 12 Mbit/s.
■ Only devices with a FAT16/FAT32
file system are supported.
■ Hard disk drives (HDD) are not
supported.
■ USB hubs are not supported.
■ The following file formats can be
used:
ISO9660 Level 1, Level 2 (Romeo,
Joliet)
MP3 and WMA files written in
another format than listed above
may not play correctly, and their file
names and folder names may not
be displayed correctly.
■ The following restrictions apply to
the files stored on the external
device:
Bit rate: 8 kbit/s - 320 kbit/s
Sampling frequency: 48 kHz,
44.1 kHz, 32 kHz (for MPEG-1) and
86
USB port
24 kHz, 22.05 kHz, 16kHz (for
MPEG-2)
■ The following restrictions apply to
the data stored on external devices
connected to the USB port:
Number of tracks: max. 999
Number of tracks per folder level:
max. 512
Folder structure depth: max.
10 levels
WMA files with Digital Rights
Management (DRM) from online
music shops cannot be played.
WMA files can only be played
safely, if they were created with
Windows Media Player version 9 or
later.
Applicable playlist
extensions: .m3u, .pls, .wpl
Playlist entries must be in the form
of relative paths.
The system attribute for folders/
files that contain audio data must
not be set.
Playing saved audio files
Press MEDIA once or several times to
activate the MP3 or iPod mode.
Replay of the audio data stored on the
device is started automatically.
MP3:
Shuffle songs
To play all tracks in a random order:
set this function to On.
Note
If this function is activated, 2 is
shown in the respective main menu.
iPod:
Repeat
To repeatedly listen to a track: set this
function to On.
Note
If this function is activated, 1 is
shown in the respective main menu.
Using the device-specific menu
Press MENU-TUNE to open the
menu of the device currently
connected.
Folders
To select a track from a folder: select
Folders. A list of the folders stored on
the device is displayed.
Select one of the folders and then
select the desired track.
USB port
Note
This menu item is not available if an
iPod is connected.
Search...
To open a menu for track search and
selection: select Search....
Select one of the categories and then
select the desired track.
Removing the device
To safely remove the device, select
Remove USB or Eject iPod and then
disconnect the device.
87
88
Bluetooth music
Bluetooth music
General information ..................... 88
Operation ..................................... 88
General information
Operation
Bluetooth enabled audio sources
(e.g. music mobile phones, MP3
players featuring Bluetooth, etc.)
which support the Bluetooth music
protocol A2DP can be connected
wirelessly to the Infotainment system.
Prerequisites
Important information
■ The Infotainment system only
connects to Bluetooth devices that
support A2DP (Advanced Audio
Distribution Profile) version 1.2 or
higher.
■ The Bluetooth device must support
AVRCP (Audio Video Remote
Control Profile) version 1.0 or
higher. If the device does not
support AVRCP, only the volume
can be controlled via the
Infotainment system.
■ Before connecting the Bluetooth
device to the Infotainment system,
become acquainted with the
device's operating instructions for
Bluetooth functions.
The following prerequisites must be
met in order to use the Bluetooth
music mode of the Infotainment
system:
■ The Bluetooth function of the
Infotainment system must be
activated 3 91.
■ The Bluetooth function of the
external Bluetooth audio source
must be activated (see operating
instructions for the device).
■ Depending on the external
Bluetooth audio source, it may be
required to set the device to
"visible" (see operating instructions
for the device).
■ The external Bluetooth audio
source must be paired and
connected to the Infotainment
system 3 91.
Activating the Bluetooth music
mode
Press MEDIA once or several times to
activate the Bluetooth music mode.
Bluetooth music
Bluetooth music playback has to be
started and paused/stopped via the
Bluetooth device.
Operation via Infotainment
system
Adjusting the volume
The volume can be adjusted via the
Infotainment system 3 66.
Skipping to next or previous track
Briefly press s or u on the
control panel of the Infotainment
system.
89
90
Phone
Phone
General information ..................... 90
Bluetooth connection ................... 91
Emergency call ............................ 93
Operation ..................................... 93
Mobile phones and CB radio
equipment .................................... 97
General information
The Phone portal provides you with
the possibility of having mobile phone
conversations via a vehicle
microphone and the vehicle
loudspeakers as well as operating the
most important mobile phone
functions via the Infotainment system
in the vehicle. To be able to use the
Phone portal, the mobile phone must
be connected to the Infotainment
system via Bluetooth.
Not all Phone portal functions are
supported by every mobile phone.
The possible phone functions depend
on the relevant mobile phone and
network provider. You will find further
information on this in the operating
instructions for your mobile phone or
you can enquire about them with your
network provider.
Important information for
operation and traffic safety
9 Warning
Mobile phones have effects on
your environment. For this reason
safety regulations and directions
have been prepared. You should
be familiar with the related
directions before you use the
telephone function.
9 Warning
Use of the hands-free facility while
driving can be dangerous because
your concentration is reduced
when telephoning. Park your
vehicle before you use the handsfree facility. Follow the stipulations
of the country in which you find
yourself at present.
Do not forget to follow the special
regulations that apply in specific
areas and always switch off the
mobile phone if the use of mobile
Phone
phones is prohibited, if
interference is caused by the
mobile phone or if dangerous
situations can occur.
Bluetooth
The Phone portal is certified by the
Bluetooth Special Interest Group
(SIG).
You will find further information about
the specification on the Internet at
http://www.bluetooth.com
Find a detailed description in the
operating instructions for the mobile
phone.
Activating Bluetooth
Press CONFIG to open the Settings
menu.
Select Phone settings and then
Bluetooth. The submenu prompts you
with a question.
Bluetooth connection
Bluetooth is a radio standard for the
wireless connection of e.g. a
telephone with other devices. Data
such as a telephone book, call lists,
the network operator's name, and
field strength can be transferred. The
functionality can be restricted
depending on the telephone type.
To be able to set up a Bluetooth
connection with the Phone portal, the
Bluetooth function of the mobile
phone must be activated and the
mobile phone must be set to "visible".
91
Set Bluetooth to On by answering the
question with Yes or No, as required.
Pairing a Bluetooth device
Press CONFIG to open the Settings
menu. Select Phone settings and
then Pair device.
You may optionally press y / @ twice.
The following display is shown:
As soon as the Phone portal of the
Infotainment system is detected, it
appears in the device list of your
Bluetooth device. Select the Phone
portal.
Upon request, enter the PIN code on
your Bluetooth device. The devices
are paired and connected.
Note
Your mobile phone book will be
downloaded automatically. The
presentation and order of the
telephone book entries may be
different on the Infotainment
system's display and the mobile
phone's display.
If the Bluetooth connection has been
successfully performed: in case
another Bluetooth device had been
92
Phone
connected to the Infotainment
system, this device is now
disconnected from the system.
If the Bluetooth connection failed:
start the procedure described above
again or consult the operating
instructions for the Bluetooth device.
Note
A maximum of 5 devices can be
paired with the Infotainment system.
Changing the Bluetooth code
Press CONFIG to open the Settings
menu.
Select Phone settings and then
Change Bluetooth code. The
following display is shown:
Connecting another paired
device
Press CONFIG to open the Settings
menu.
Select Phone settings and then
Device list. A list of all Bluetooth
devices currently paired to the
Infotainment system is displayed.
Note
The Bluetooth device currently
connected to the Infotainment
system is indicated by 9.
Note
The Bluetooth device currently
connected to the Infotainment
system is indicated by 9.
Select the paired device. A submenu
is displayed.
Select the submenu item Disconnect
to disconnect the device.
Removing a paired device
Select the desired device. A submenu
is displayed.
Select the submenu item Select to
establish the connection.
Enter the desired four-digit PIN code
and confirm your input with OK.
Select Phone settings and then
Device list. A list of all Bluetooth
devices currently paired to the
Infotainment system is displayed.
Disconnecting a device
Press CONFIG to open the Settings
menu.
Press CONFIG to open the Settings
menu.
Select Phone settings and then
Device list. A list of all Bluetooth
devices currently paired to the
Infotainment system is displayed.
Note
The Bluetooth device currently
connected to the Infotainment
system is indicated by 9.
Select the desired device. A submenu
is displayed.
Phone
If the device is connected, it must be
disconnected first (see above).
Select the submenu item Delete to
remove the device.
Restoring the factory defaults
The phone settings, e.g. the device
list, the Bluetooth code, and the ring
tone, can be reset to the factory
defaults.
Press CONFIG to open the Settings
menu. Select Phone settings and
then Restore factory settings.
The submenu prompts you with a
question. To reset all values to the
factory defaults, select Yes.
Emergency call
9 Warning
Connection setup cannot be
guaranteed in all situations. For
this reason, do not rely exclusively
on a mobile phone when a vitally
important communication (e.g. a
medical emergency) is concerned.
On some networks, it may be
necessary for a valid SIM card to
be properly inserted in the mobile
phone.
9 Warning
Bear in mind that you can make
and receive calls with the mobile
phone, if it is in a service area with
a sufficiently strong signal. Under
certain circumstances emergency
calls cannot be made on all mobile
phone networks; it is possible that
they cannot be made when certain
network services and/or telephone
functions are active. You can
enquire about this with the local
network operators.
The emergency call number can
differ depending on the region and
country. Please enquire
beforehand about the correct
emergency call number for the
relevant region.
93
Making an emergency call
Dial the emergency call number (e.g.
112).
The telephone connection to the
emergency call centre is set up.
Answer when the service personnel
questions you about the emergency.
9 Warning
Do not end the call until you are
requested to do so by the
emergency call centre.
Operation
As soon as a Bluetooth connection
has been set up between your mobile
phone and the Infotainment system,
you can also operate many functions
of your mobile phone via the
Infotainment system.
Via the Infotainment system, you can,
e.g. set up a connection to the
telephone numbers stored in your
mobile phone or change the
telephone numbers.
94
Phone
Note
In the handsfree mode, mobile
phone operation is still possible,
e.g. taking a call or adjusting the
volume.
After the setup of a connection
between the mobile phone and the
Infotainment system, mobile phone
data is transmitted to the Infotainment
system. This can take several
minutes depending on the phone
model. During this period, operation
of the mobile phone is possible via the
Infotainment system only to a limited
extent.
Note
Not every mobile phone supports all
functions of the Phone portal.
Therefore deviations from the range
of functions described with these
specific mobile phones are possible.
Prerequisites
The following prerequisites must be
met in order to use the handsfree
mode of the Infotainment system:
■ The Bluetooth function of the
Infotainment system must be
activated 3 91.
■ The Bluetooth function of the
mobile phone must be activated
(see user guide of the device).
■ The mobile phone must be set to
"visible" (see user guide of the
device).
■ The mobile phone must be paired
to the Infotainment system 3 91.
Activating the handsfree mode
Press y / @ on the control panel of the
Infotainment system. The phone main
menu is displayed.
Note
If there is no mobile phone
connected to the Infotainment
system, No phone available is
displayed. For a detailed description
of how to establish a Bluetooth
connection 3 91.
Many functions of the mobile phone
can now be controlled via the phone
main menu (and associated
submenus) and via the phonespecific controls on the steering
wheel.
Initiating a phone call
Entering a number manually
While in the phone main menu, press
MENU-TUNE to open the Phone
Menu.
Select the submenu item Enter
number. The following screen is
displayed.
Phone
Enter the desired number and select
y on the display to start dialling.
Note
To open the Search screen of the
phone book, select 4.
Using the phone book
The phone book contains contact
names and numbers.
While in the phone main menu, press
MENU-TUNE to open the Phone
Menu.
Select the submenu item Phone
book. The following screen is
displayed.
As on a telephone or mobile phone,
the letters are organised in
alphabetical groups on the display:
abc, def, ghi, jkl, mno, pqrs, tuv, and
wxyz.
Select the desired group of letters.
The phone book is displayed showing
the entries starting with one of the
letters in the letter group.
Scroll through the list and select the
desired entry name.
Scroll through the list of phone
numbers and select the desired
number. The corresponding phone
number is dialled.
Adjusting the sorting order of the
phone book
After pairing and connecting a mobile
phone to the Infotainment system,
your mobile phone book with phone
numbers and names will be
automatically downloaded to the
Infotainment system.
The phone book on the Infotainment
system may be sorted by First Name
or Last Name.
Press CONFIG to open the Settings
menu.
Select Phone settings and then
Phone book sorting.
Select the desired option.
95
Using the call lists
All incoming, outgoing, or missed
calls are registered in corresponding
call lists.
While in the phone main menu, press
MENU-TUNE to open the Phone
Menu. Select the submenu item Call
lists.
You may optionally press the y / @
button.
The following screen is displayed.
Select the desired call list, e.g.
Missed calls. A menu with the
corresponding call list is displayed.
96
Phone
To initiate a phone call: select the
desired list entry. The corresponding
phone number is dialled.
Redialling a phone number
The last dialled phone number can be
redialled.
Press 7 on the steering wheel to
open the Redial menu.
Press 7 again to start dialling.
Press xn on the steering wheel to
exit the Redial menu.
You may optionally use the
MENU-TUNE knob to select No on
the display.
Incoming phone call
If an audio mode, e.g. the radio or CD
mode, is active at the time of an
incoming call, the relating audio
source will be muted and stay muted
until the call ends.
To answer the call: select Answer on
the display.
To reject the call: select Decline on
the display.
Second incoming phone call
If a second phone call comes in
during an ongoing call, a message is
displayed.
To answer the second call and end
the ongoing call: select Answer on the
display.
To reject the second call and continue
the ongoing call: select Decline on the
display.
Changing the ring tone
Press CONFIG to open the Settings
menu.
Select Phone settings, Sound &
Signals and then Ring tone. A list of
all ring tones available is displayed.
Select the desired ring tone.
For a detailed description on the ring
tone volume 3 71.
Select Menu on the display to open
the menu Connected.
Select Hang up on the display to end
the call.
Activating the private mode
In the Connected menu, select the
submenu item Private call to switch
the call to the mobile phone. The
following display is shown.
Functions during a phone call
During an ongoing phone call, the
phone main menu will be displayed as
follows.
To switch the call back to the
Infotainment system, select Menu on
the display and then Transfer call.
Phone
Deactivating/activating the
microphone
In the Connected menu, set the
submenu item Mute Mic to On. The
caller cannot hear you any more.
To reactivate the microphone: set the
submenu item Mute Mic to Off again.
Mobile phones and CB
radio equipment
Installation instructions and
operating guidelines
The vehicle specific installation
instructions and the operating
guidelines of the mobile phone and
handsfree manufacturer must be
observed when installing and
operating a mobile telephone. Failure
to do so could invalidate the vehicle
type approval (EU directive
95/54/EC).
Recommendations for fault-free
operation:
■ Professionally installed exterior
antenna to obtain the maximum
range possible.
■ Maximum transmission power of
10 watts.
■ Installation of the phone in a
suitable spot, consider relevant
Note in the Owner's Manual,
section Airbag system.
Seek advice on predetermined
installation points for the external
antenna or equipment holder and
ways of using devices with a
transmission power exceeding
10 watts.
Use of a handsfree attachment
without external antenna with mobile
telephone standards
GSM 900/1800/1900 and UMTS is
only permitted if the maximum
transmission power of the mobile
telephone is 2 watts for GSM 900 or
1 watt for the other types.
97
For reasons of safety, do not use the
phone while driving. Even use of a
handsfree set can be a distraction
while driving.
9 Warning
Operation of radio equipment and
mobile telephones which fail to
meet above mentioned mobile
telephone standards is only
permitted using an antenna
located outside of the vehicle.
Caution
Mobile telephones and radio
equipment may lead to
malfunctions in the vehicle
electronics when operated inside
the vehicle with no exterior
antenna, unless the above
mentioned regulations are
observed.
98
Index
A
Activating Bluetooth music........... 88
Activating CD player..................... 82
Activating the AUX function.......... 84
Activating the handsfree Phone
mode......................................... 93
Activating the radio....................... 73
Activating the USB function.......... 86
Autostore lists............................... 74
Retrieving stations..................... 74
Storing stations......................... 74
Auto volume control...................... 71
AUX input
Activating................................... 84
Adjusting the volume................. 84
General information................... 84
Operation.................................. 84
B
Basic operation............................. 68
Blocking out traffic
announcements........................ 77
Bluetooth
Bluetooth connection................ 91
Bluetooth music......................... 88
Phone........................................ 93
Bluetooth connection.................... 91
Bluetooth music
Activating................................... 88
General information................... 88
Operation.................................. 88
Prerequisites............................. 88
C
Call
Functions during a call.............. 93
Incoming call............................. 93
Initiating a phone call................ 93
Ring tone................................... 93
Call lists........................................ 93
Category list.................................. 75
CD menu...................................... 82
CD player
Activating................................... 82
CD menu................................... 82
General information................... 81
Inserting a CD........................... 82
Removing a CD......................... 82
Starting CD replay..................... 82
Usage........................................ 82
Control elements
Infotainment system.................. 62
Phone........................................ 90
Steering wheel.......................... 62
Control elements overview........... 62
99
D
DAB.............................................. 79
Date settings................................. 66
Digital audio broadcasting............ 79
Dynamic audio adaption............... 79
E
Emergency call............................. 93
F
Favourite lists............................... 75
Retrieving stations..................... 75
Storing stations......................... 75
G
General information 81, 84, 85, 88, 90
AUX input.................................. 84
Bluetooth music......................... 88
CD player.................................. 81
Infotainment system.................. 60
Phone........................................ 90
USB port.................................... 85
I
Infotainment control panel............ 62
L
Language settings........................ 66
M
Maximum startup volume............. 71
Menu operation............................. 68
MENU-TUNE knob....................... 68
Mobile phones and CB radio
equipment ................................ 97
Mute.............................................. 66
Incoming call............................. 93
Phone book............................... 93
Prerequisites............................. 93
Redialling a phone number....... 93
Selecting the ring tone.............. 93
Phone book.................................. 93
Playing saved audio files.............. 86
O
R
Operation................................ 88, 93
AUX input.................................. 84
Bluetooth music......................... 88
CD player.................................. 82
Menu......................................... 68
Phone........................................ 93
Radio......................................... 73
USB port.................................... 86
P
Phone
Activating................................... 93
Bluetooth................................... 90
Bluetooth connection................ 91
Call lists..................................... 93
Control elements....................... 90
Dialling a number...................... 93
Emergency calls........................ 93
Functions during a call.............. 93
General information................... 90
Important information................ 90
Radio
Activating................................... 73
Autostore lists............................ 74
Band selection.......................... 79
Category list.............................. 75
Configuring DAB....................... 79
Configuring RDS....................... 77
DAB announcements................ 75
Digital audio broadcasting
(DAB)........................................ 79
Dynamic audio adaption........... 79
Favourite lists............................ 75
Radio data system (RDS)......... 77
Radio traffic service................... 77
Regionalisation......................... 77
Retrieving stations.............. 74, 75
Selecting the waveband............ 73
Station lists................................ 75
Station search........................... 73
Station tuning............................ 73
Storing stations................... 74, 75
100
Traffic announcements............. 77
Updating station lists................. 75
Usage........................................ 73
Waveband menus..................... 75
Radio data system (RDS) ............ 77
Radio traffic service...................... 77
RDS.............................................. 77
Redial function.............................. 93
Regionalisation............................. 77
Retrieving stations.................. 74, 75
Ring tone
Ring tone volume...................... 71
Selecting the ring tone.............. 93
S
Selecting the waveband............... 73
Starting CD replay........................ 82
Station lists................................... 75
Station search............................... 73
Steering wheel audio controls...... 62
Storing stations....................... 74, 75
Switching the Infotainment
system on.................................. 66
Switching the radio on.................. 73
System settings
Language.................................. 66
Restore factory settings............ 66
Time and date........................... 66
Vehicle settings......................... 66
T
TA volume.................................... 71
Theft-deterrent feature ................. 61
Time settings................................ 66
Tone settings................................ 70
Traffic announcements................. 77
U
Updating station lists.................... 75
Usage......................... 66, 73, 82, 84
AUX input.................................. 84
Bluetooth music......................... 88
CD player.................................. 82
Menu......................................... 68
Phone........................................ 93
Radio......................................... 73
USB port.................................... 86
USB menu.................................... 86
USB port
Activation................................... 86
Connecting the USB device...... 85
General information................... 85
Important information................ 85
Operation.................................. 86
Removing the USB device........ 86
USB menu................................. 86
V
Volume
Auto volume control.................. 71
Maximum startup volume.......... 71
Mute function............................. 66
Ring tone volume...................... 71
Setting the volume.................... 66
Speed compensated volume.... 71
TA volume................................. 71
Volume limitation at high
temperatures............................. 66
Volume settings............................ 71
W
Waveband menus......................... 75
FlexDock
FlexDock .................................... 102
Index .......................................... 104
102
FlexDock
FlexDock
General information ................... 102
Usage ........................................ 102
General information
FlexDock consists of a built-in base
plate and different types of cradles
which can be attached to the base
plate. By inserting an iPhone or a
different smartphone to the cradle,
the smartphone can be controlled via
the Infotainment system, steering
wheel control or touch screen.
Detailed cradle usage information
can be found in the cradle manual
supplied with each cradle.
9 Warning
Devices attached to the FlexDock
must be used in a way that driver
distraction is avoided and the
vehicle can be driven safely at all
times. You must always comply
with the respective laws and
regulations of the country where
you are driving. These laws may
differ from the information in this
manual. If in doubt, stop your
vehicle and operate devices while
the vehicle is stationary.
Note
Do not operate a further audio
source via the USB socket at the
same time due to superimpositions
of both audio sources.
Caution
To avoid theft, do not leave the
mobile phone in the FlexDock
when leaving the vehicle.
Usage
Attaching the cradle to the base
plate
FlexDock
1. Remove the cover from the base
plate.
2. Push the cradle in the base plate
and fold down.
Connecting the smartphone to
the Infotainment system
Universal smartphone
Connect the smartphone to the cradle
by using the connecting cable.
iPhone
The iPhone is connected
automatically when it is inserted into
the cradle.
Depending on the status of the
software and hardware equipment,
the functionality of the iPhone can be
restricted.
To use the phone function or the
Bluetooth Music function, a Bluetooth
connection must be established. See
the corresponding instructions in this
manual and the operating instructions
for the smartphone for detailed
information.
Removing the cradle from the
base plate
1. Push the release button and
remove the cradle.
Operating the smartphone
When the smartphone is connected
via FlexDock, it has the same
functionality as if it is connected via
the USB socket. See the
corresponding instructions in this
manual for detailed information.
2. Attach the cover to the base plate.
103
104
Index
B
Base plate................................... 102
C
Cradle......................................... 102
F
FlexDock..................................... 102
G
General information.................... 102
U
Usage......................................... 102
www.opel.com
Copyright by ADAM OPEL AG, Rüsselsheim, Germany.
The information contained in this publication is effective as of the date indicated below. Adam Opel AG reserves the right to make changes to the technical specifications, features and
design of the vehicles relative to the information in this publication as well as changes to the publication itself.
Edition: January 2015, ADAM OPEL AG, Rüsselsheim.
Printed on chlorine-free bleached paper.
KTA-2745/4-en
*KTA-2745/4-EN*
01/2015
Download PDF

advertising