The exclusive ChillTech Water treatment system

www.systemsiv.com
W
Water
Treatment
T
Solutions
The exclusive Chil Tech Water treatment
system lowers water temperature to
incoming ice makers. This results in
significantly reduced ice maker cycle
times while lowering the KWH consumption
up to 30% and increasing ice making
capacity up to 30% or more!
Bypass Installation
Valve operation:
Normal Installation - Valve A: open
Valve B: closed
Benefits
• Increases ice production up to
30% or more !
• Lowers KWH consuption by up to 30%
• Stand alone product
• No Electricity required
• Easily connects to cold water
feed line
• 2 year parts warranty
Bypass Installation - Valve A: closed
Valve B: open
Vent
Potable Water Inlet
Valve A
X
From Ice
Maker Drain
Potable Water
Outlet To The
Ice Maker
MODELS
Model
Model
Model
Available
Shipping
Line Sizes
ChillTech1
ChillTech2
ChillTech3
In-Stock
Same Day
1/2”
X Valve B
Drain
ChillTech
INSTALL VENT
24” ABOVE ICE
MACHINE
DRAIN LINE
DO NOT
REDUCE DRAIN
LINE SIZE
FROM 3/4”
Accessories:
Scalegone 1
Inhibits limescale build-up by dispensing controlled
amount of Citryne compound, ideal for heat exchange equipment.
Consider ScaleGone 1 for all equipment that heats or cools
water in areas with water that has even low levels of hardness.
USA Distribution Center - 9016 Routes 5 & 20, West Bloomfield, NY 14585 (877) 322-5019
CHILLTECH ADVANTAGE
Significant
reduction in ice
maker cycle times.
• ChillTech I – Up to 600
lb day cuber
• ChillTech II – Up to
1,300 lb day cuber
Larry with his
ChillTech
ChillTech Series by Systems IV Products Company!
The marketplace is full of poor
performing commercial ice machines.
Most buyers purchase what they need
at the time and nothing more. Most
businesses grow and of course, the ice
machine does not. Purchasing ice is
expensive to say the least.
Performance on all ice machines is
measured by ambient air temperature
and incoming water temperature.
Years ago a restaurant owner told us
he loved the ice machine except that
it did not make enough ice in the
summer and overdid it in the winter.
We heard this over and over. Systems
IV developed CHILL TECH to be a very
simple add on to existing or new ice
machines. Designed to sit on the floor
or attached via a simple clamp to the
side of the bin for additional support.
• ChillTech III – Up to
2,400 lb day cuber
“Reduce energy up
to 30% and increase
ice production 30%
or more while
extending the life of
your ice makers.”
Temperature Reduction
We have found CHILL TECH not only
reduces freeze times but also increased
harvest weight which in turn reduces
the amount of water purged at cycles
end. This means a highly reduced KWH
consumption per 100 pounds of ice
and a reduction in gallons of water
used per pounds of ice harvested.
The exclusive chilltech system will
significantly reduce water temperature
to incoming ice makers. This will reduce
ice maker cycle times while increasing
the ice making capacity of the ice
maker up to 30 percent
a lower electric bill... This results in the
Chill Tech’s ability to pay for itself in
always less than a year and in many
case's in 6 months or less. Attaches to
existing drain line. Fast installation.
Chill Tech catches that wonderful free
energy and transfers the cold left over
water to the incoming warmer water in
its system to bring the temperature
down up to 30%. The result is an
icemaker that makes much more ice in
the days and months and even years
to come on FREE Energy. Attaches to
an existing drain line. No Maintenance!
3 ChillTech sizes to choose from.
Up to 2,400 lb/day machines.
Less KWH cost to the consumer results in
LAS Associates / FAIM REPS
●
(877) 322-5019
We developed the ChillTech to be simple
Installation requires nothing more
than taking the existing drain tubing
from the icemaker itself and
installing it to the inlet line and then
installing the continuation drain line
to the drain. The inlet potable water
line to the icemaker needs to be
routed to the marked flare fitting
and the continuation to the
icemaker from the flare fittings. It
would be a advisable, although not
necessary to wrap the continuing
water line to the icemaker with
insulation. This would maintain the
cold temperatures the CHILLTECH
brings to the icemaker. An ice
maker installed with a Systems IV
ChillTech will reduce freeze times.
Cooler temperatures mean less
heat. Heat is wear. So, the
customer can expect to find lower
temperatures surrounding the
icemaker - the condenser if air-
cooled will discharge a slightly
cooler air since it has less heat to
remove due to the lighter load or
temperature of the water. All the
components will last longer as they
are now operating for a shorter
period of time.
How long will it take for the
customer to know the Chill
Tech is working for him?
Almost immediately... There is no
breaking in period. The moment
the customer has the Chill Tech
installed; it is working. There is no
break-in period.
The essence of simplicity is generally
what works! Today, GREEN is the
issue... This product is about as
green as it gets!
Words from LARRY…
“We have found that not only did
we reduce freeze times increased
harvest weight which in turn
reduces the amount of water purged
at cycles end. This means a reduced
KWH consumption per 100 pounds
of ice and a reduction in gallons of
water used per pounds of ice
harvested.
Your customers will benefit in many
ways by using ChillTech.
Remember, there are no electrical
hook ups, the unit is self cleaning,
reduces water consumption,
increase’s capacity, has no moving
parts, is maintenance free and is
simple to install to new or in
particular existing installations.”
LAS Associates / FAIM REPS
●
(877) 322-5019
W
Water
Treatment Solutions
T
USA Distribution Center - 9016 Routes 5 & 20, West Bloomfield, NY 14585 (877) 322-5019
Ice Maker Capacity (lbs/day)
400
600
800
1000
1200
1800
2400
330
120,450
460
167,900
700
255,500
820
299,300
1075
392,375
1350
492,750
1875
684,375
99
36,135
138
50,370
210
76,650
246
89,790
322.5
117,713
405
147,825
562.5
205,313
897.90 $ 1,177.13
$ 1,478.25
$ 2,053.13
Increase ICE production by 30%!
ChillTech Decreases cycle time by an average of 30%
$
361.35
$
503.70
$
766.50
$
Ice Production Calculator?
lbs
Save
ave on Electricity!
Make
Mak
Ma
ke more
more Ice with 30% less ener
mor
energy
ene
rgy
Typical
ypical kWh to produce 100 lbs of Ice
Annual Savings
vings of 30%
TTotal
To
tal
al Elec Bill
kWh used
X
8.5
28.05
$ 1,023.83
$
307.15
[
* Check your electric bill - Divide total cost by kWh for actual kWh costs. Stated Rate does not include misc costs and fees
$
8.3
38.18
1,393.57
$
6.1
42.7
1,558.55
$
418.07
$
467.57
100
]
5.9
48.38
$ 1,765.87
5.7
61.275
$ 2,236.54
6.1
82.35
$ 3,005.78
5.6
105
$ 3,832.50
$
$
$
$ 1,149.75
529.76
670.96
901.73
Savings Calculator?
kWh
100lb
100l
per 100lbs
X 0.3 X 365 = $