www.CleanChoicePool.com
CCR4 Manual
ROBOTIC POOL CLEANER
CCR4
USER MANUAL
1
www.CleanChoicePool.com
CCR4 Manual
Contents
I.
Introduction
…………p3
II.
Warning and Cautions
…………p3
III.
Specifications
…………p3
IV.
Operation instructions
…………p4
V.
Packing list
…………p8
VI.
Troubleshooting
…………p9
VII.
Warranty
…………p10
2
www.CleanChoicePool.com
CCR4 Manual
Introduction
I.
The robotic pool cleaner CCR4 (with remote control and smart phone app) is a new type of highly efficient
and energy-saving swimming pool cleaning robot. Through its advanced computer controlled program, it
can clean the pool walls and bottom automatically. At the same time, it filters the pool water and gets rid of
suspended particles.




3 engines to cover more area and cope with different shape of the swimming pool
Swivel cable to prevent cable tangling
Easy removal filter tray to make the cleaning easier
Remote control and Bluetooth app make it more convenient
II. Warning and Cautions
1. Use the original power supply only and plug in an appropriate earthed socket.
2. Keep the power supply unit out of water and need to be at least 3.5m away from pool edge.
3. Never power on the unit when it is outside of the swimming pool.
4. Do not operate the cleaner when people are in the pool.
5. The cleaner should be stored in a cool and ventilated place, away from direct sunlight when not in
use.
6. The power supply unit should be placed in a shaded area during working. In order to avoid
overheating and potential damage of components, never cover the power supply unit.
7. Only authorized after sales service personnel should open the cleaner’s power supply unit and
motor assembly, otherwise the warranty will be invalidated.
III. Specifications
1. Input voltage: 220V/ 110V
2. Frequency:50Hz/60Hz
3. Output voltage:DC24V
4. Power:200W
3
www.CleanChoicePool.com
CCR4 Manual
5. Working cycle: 1H/ 2H/ 3H
6. Remote control frequency:315 MHz
7. Cable length: 18m
8. Max cleaning area: 200 ㎡
9. Flow rate:20m³/h
10. Filter net density: 180um
11. Pool water temperature:10℃-32℃
12. Moving speed:MAX 12.5m/min
13. IP grade:Cleaner IPX8, Power supply unit IPX5
14. Cleaner weight:12.5kg (Without cable)
IV. Operation Instruction
1. Control Panel
2
4
3
1
4
www.CleanChoicePool.com
NO.
SIGN
CCR4 Manual
INDICATE
FUNCTION
Press the button to turn on the control panel, then
1
ON/ OFF
Switch on or off
choose the mode and time, press the button again to
make the cleaner running under the selected mode.
Clean the swimming pool floor wall and water line
ALL
2
3
Mode
(once wall once floor).
WALL
Clean the swimming pool wall only.
FLOOR
Clean the swimming pool floor only.
ALL + FLOOR
Clean three times the floor and one time the wall.
TIME
1H
1 hour
2H
2 hours
3H
3 hours
Machine Status
4
Two or three indicators on
Machine stopped
1H flash slowly
Machine is running under 1 hour mode
2H flash slowly
Machine is running under 2 hour mode
3H flash slowly
Machine is running under 3 hour mode
ALL light on
Running under ALL mode
Indicator
5
www.CleanChoicePool.com
CCR4 Manual
WALL light on
Running under WALL mode
FLOOR light on
Running under FLOOR mode
ALL+ FLOOR light on
Running under mode ALL-FLOOR
All lights flash slowly
Program complete
2. Put cleaner into water
When put the cleaner into the water please hold the top handle make sure to empty the trapped
air inside, then the cleaner can immerse into the pool floor.
3. Remove cleaner from water
When pulling cleaner out of water suspend the cleaner above water for about 10-15 seconds to
empty the water inside. Please holds the top handle only, never pull the cable.
6
www.CleanChoicePool.com
CCR4 Manual
4. Remote control
1
Antenna
2
Signal indicator
3
4
5
6
7
8
Direction Control Button
5. Bluetooth phone app
1
Connection Status
2
Control Buttons, need to hold to make the
cleaner running to the direction
3
Clean Mode
4
Start/Stop Control
7
www.CleanChoicePool.com
CCR4 Manual
6. Clean the filter tray
V.
1. Lift the handle
2. Lift the filter tray
3. open the filter tray
4. Rinse the tray and filter
5. Slide the filter tray along the
groove
6. Push the two handles to
the groove
Packing List
Item
Name
Quantity
(pc)
Note
1
Cleaner
1
In Carton
2
Power supply unit
1
In Carton
3
Manual and certificates, etc.
1
Big Plastic Bag
Safety rope
1
Big Plastic Bag
5
Battery
1
Mini Plastic Bag
6
Antenna for remote control
1
Mini Plastic Bag
7
Remote control
1
Mini Plastic Bag
4
Cleaner
8
www.CleanChoicePool.com
CCR4 Manual
VI. Troubleshooting
Symptom
Diagnosis
Cleaner is not moving to all the
area or moving in circle
Suggestion
The filter tray is full or
some foreign object in
propel part
Cleaner will not climb the wall
Filter tray is full
Cleaner climbing the wall too
Need to reduce the propel
high
tension
1H light flash quickly with buzz.
Cleaner is out of water
WALL+2H flash quick with buzz
Driving motor 1
FLOOR+3H flash quick with
buzz
WALL+FLOOR+2H+3H
flash
Driving motor 2
Clean the filter tray and remove the
foreign objects in the cleaner
Clean the filter tray
Contact the dealer
Put cleaner back into water
Check if the driving belt is out of
socket
Check if the driving belt is out of
socket
Cleaner is out of water
Stop cleaner and restart machine
quick with buzz
and could not restart
manually
WALL flash quick with buzz
Cleaner turned over
Turn over cleaner manually
All lights flash quickly with buzz
Control box over load
1H+2H+3H flash quick with buzz
Seal box leaking
ALL+1H flash quick with buzz
Pump over load
9
Stop the cleaner and
contact
dealer
Stop the cleaner and contact
dealer
Stop
cleaner
and
impeller and pump
check
the
www.CleanChoicePool.com
CCR4 Manual
ALL+WALL+1H+2H
Cleaner present abnormal
Stop cleaner and contact the
flash quick with buzz
voltage
dealer
Check the cable between cleaner
ALL+WALL+FLOOR
Abnormal communication
flash quick with buzz
and control box or contact the
dealer
VII. Warranty
This product has passed all quality control and safety tests, conducted by the technical department of the
factory.
Warranty information:
1. The limited warranty includes both parts and labor for the periods of 2 years and is available only
to the original purchaser (USA only).
2. This warranty is void if the product has been altered, misused, or has been repaired by
unauthorized personnel.
3. The warranty extends only to manufacturing defects and does not cover any damage resulting from
mishandling of the product by the owner
4. The sales invoice must be presented for any claim or repair during the warranty period.
10
Download PDF
Similar pages
Check list for Cleverboard 3
RM-7970
Kompernass KH 20 Brochure
19294sp
Instruction Manual
68-0228 - 4 Pole Double Throw Relay Model 4PDT-R
WIAA BASKETBALL REMINDERS
Glossary
One-door Access Controller