AutoPOD™ Coffee Brewing Process
Step 1: Home screen will display a total of three messages.
AutoPod Brewer
Ready To Brew
Place Cup
To Begin
Press Open
To Load Pod
Step 2: Place cup under brew chamber onto booster tray or drip tray. The booster tray will allow up to 5 inch cup
clearance or bottom drip tray up to 8 inch cup clearance.
Step 3: Press the Open/Close switch to open the pod door and press a coffee pod firmly down into the pod holder.
Menu screens will prompt you through the process. The pod holder will accommodate a variety of pods and different
sizes from 50 to 61mm wide.
PLEASE WAIT
DOOR OPENING
PRESS POD
IN DRAWER
Step 4: Press the Open/Door switch to close the pod door. Menu screens will prompt you through closing the door
and selecting brew size.
PLEASE WAIT
DOOR CLOSING
SELECT BREW
Step 5: After selecting brew, the menu screens will scroll brewing messages during the brew process and inform you
when brewing is complete. The system will automatically dispense the pod into the pod bin, reset back to standby
position and be ready for next brew command.
PLEASE WAIT
PRE-INFUSION
Rev. 06/26/09
BREWING
PLEASE WAIT
BREWING
COMPLETE
ENJOY
YOUR BEVERAGE