Concealed fixing holes Ø11
12.4100
DOLPHIN SOFT-FALL GRAB BAR
› Fold down grab bar 800mm long in satin finish stainless steel with soft fall
damping mechanism
LENGTH
800
MM
› Usage: Ideal for Disabled Toilets
› Satin stainless steel finish
SPE CIFICAT ION
Straight fold down grab bar with ‘soft fall’ damping mechanism. Model
number 12.4100 brushed satin c/w wall mounted grab bar retaining catch.
Manufactured by Dolphin Solutions Ltd.
MAT E RIAL
› Grab Bar: 12.4100 Ø32mm solid bar satin finish stainless steel grade
1.4301 (304)
› Back Plate: 12.4100 25mm satin finish stainless steel grade 1.4301(304)
› Tested to 190kg BS EN 12182. Achievable weight load dependent on wall
construction/fixings.
› Approximate weight: 9.5kg
TECHNIC AL HELPLINE
0 1 4 24 202224
D O L P H I N S O L U T I O N S . C O. U K
OPE RAT ION
› To lower grab bar when in vertical position; Disengage grab bar
from catch, by pulling grab bar away from the wall, until it is in the
horizontal position. To relocate bar push bar upwards until it self
locates in retaining catch.
› ‘Soft Fall’ damping mechanism is factory set. It is recommended
that the friction of the bar is not decreased from the factory
setting.
IN STALLAT ION
› Recommended mounting height from top surface of bar (When
in drop down position) to FFL 680mm
› Remove screw concealing caps from wall plate
› Mark location of fixing holes on wall.
› Drill holes and fix wall plate to wall using suitable screws. It is
imperative that suitable fixings for the wall installation are used
› Re-fit screw concealing caps
› To fit retaining catch, set bar in upright position, rest catch on top
of bar, drill holes and fix catch.
CARE AN D M AIN T E N AN CE
› Clean with soap and warm water, dry with a clean soft cloth.
› To maintain finish use any industrial steel cleaner, polishing along
the material grain with a clean soft cloth.
› Abrasive cleaners, chloride cleaning agents and carbon steel
brushes/steel wool will scratch the stainless steel and should not
be used.
WARRAN T Y
This product is covered by a 12-month warranty from the date of
purchase to be free from defects if installed and maintained in
accordance with these instructions. Dolphin Solutions will replace or
repair (as appropriate) free of charge any product with a proven
manufacturing defect if reported within the warranty period.
Dolphin Solutions Ltd reserves the right to amend the design or
dimensions without formal notice.
TECHNIC AL HELPLINE
0 1 4 2 4 202224
D O L P H I N S O L U T I O N S . C O. U K
Download PDF
Similar pages
TD_106054_OPS4248
3M 17206 film adhesive
Grab Bars QUANTITY: ITEM #: JOB
NAME TAG GRAB - Utah 4-H
Unique Touch Installation Instructions
MOEN LR2352DOWB Installation Guide
MOEN LR2356DBN Installation Guide
ACCESSORIES