Manitou MT 835 Datasheet

Telescopic ForkliFT Trucks
www.manitou.com
MT 835 / MT 1135 / MT 1335
2
MT 835
MT 1135
MT 1335
8 m / 3.5 T
11 m / 3.5 T
with/without
stabilizers
13 m / 3.5 T
MANITOU YOUR PARTNER FOR
ALL YOUR HANDLING SOLUTIONS
FOR OVER 50 YEARS...
MANITOU, your partner for your needs for more than
50 years whatever your application.
The new telescopic forklifts represent a complete revolution
in methods of lifting between 8 and 13 metres, and offer
high performance lifting and loading capability:
- Standard design benefits for ease of use and maintenance
- Compact machines, maximum lift capacity
- Choice of transmission - torque convertor or hydrostatic
- Platform mode: Full range of MANITOU attachments
These forklifts are your allies in your quest for productivity
and simplicity.
The performance and manoeuvrability of the new telescopic
MANITOU forklift trucks let you carry out all your building and
renovation tasks quickly and in complete safety.
3
SIMPLICITY
Simple oPeraTIon and MaInTenanCe
IDENTICAL OPERATING
system for every model
Spacious and comfortable cab
Ergonomic control
shows all the information you need
▪ panel
- direction, wheel alignment, boom angle,
fuel level, hourometer, ...
with state of charge monitor adapted to
▪ three
working modes - forks, bucket, jib
JSM® : Joystick Switch & Move
▪ Operating button for the attachment
▪ Operating button to raise or lower the telescope
▪ Lever for direction control - forward and reverse
You can work with SIMPLICITY and in complete SAFETY
▪ Platform usage: automatic blocking of the rear point (models MT 1135, MT 1335)
▪ Control of the hydraulic flow of the line to the attachment
▪ Automatic parking brake with starting assistance on slopes
▪ EASY CONNECT SYSTEM allowing for the hydraulic line depressurisation without stopping the engine
▪ Lock of the slope of the fork face to make your handling movements with a suspended load safer
▪ Digicode to start the machine
4
MT 835 / 1135 / 1335
IDENTICAL MAINTENANCE
whatever the model
0
°
DE
GREE VISIBILITY
FU
LL
36
engine, transmission, hydraulics, cab, frame - all are sourced from the same
▪ The
design.
opening of the engine compartment - no need to undo any parts,
▪ 2-sided
thereby saving maintenance time.
SAFE AND RAPID ACCESS
through a wide door with
a single notched anti-slip step.
MAINTENANCE and DIAGOSTICS for the machine
shown on multi-function screen on the dashboard.
5
ProDUCTIVITY
PerForManCe and MaInTenanCe
102 HP
permanent four-wheel drive
New generation STAGE 3B
engine with particle filter.
According
to your needs
Permanent
4 wheel drive
hydrostatic transmission or
torque converter (inching
an optional extra) to respond
to your working practice.
Powerful braking applied
on both axles.
Substantial ground clearance
41cm
3 lifting heights
One nominal load
capacity
8 - 11- 13 m
3.5 T
Frame Levelling
(standard on MT 1135 and MT 1335)
6
+/-
10°
MT 835 / 1135 / 1335
Compact stabilizers
(MT 1135 and MT 1335)
which remain within the working width
of the machine whatever their position.
Ultra-short turning
radius
3.85 m
3 Steering modes
4 steering wheels for short turning
spaces on restricted sites
2 front driving wheels to guarantee
on-road safety
Crabwise movement for lateral
approaches and delicate exits
7
VerSaTILITY
MT 835 / 1135 / 1335
Your MANITOU forklift, a multi purpose machine...
Thanks to the MANITOU attachment system, you can easily and quickly fit numerous attachments to your forklift - forks,
buckets, mixers, jibs, platform...
1
2
3
...for a multitude of applications
Versatility of MANITOU forklifts answers all your on-site needs, making the most of your working time and productivity:
of loads
▪ placing
of material in restricted space
▪ distribution
bulk
loading
at depots and on-site
▪ placing suspended
▪ lifting personnel... loads
▪
LOAD PLACING
Forks
Hook Jib
Lattice Jib
Extensible Lattice Jib
Winch
MATERIAL HANDLING
Rehandling Bucket
4 in 1 Bucket
Construction Bucket
PLATFORMS
Fixed Platform 365 kg
8
Extensible Platform 1000 kg
OTHERS
Concrete Mixer Bucket
Concrete Bucket
aPPLICaTIonS
MT 835 / 1135 / 1335
9
ManIToU SerVICeS
MT 835 / 1135 / 1335
Tailor-made finance to make
the best use of your funds
You can plan the purchase of your forklift with peace of mind
by using MANITOU* financing opportunities.
You will have simple solutions adapted to your needs and seasonal
requirements. If you want to make a rapid investment, consider asking us
for a personalised proposal to take your situation into account.
*
MANITOU Finance solutions are available in certain countries.
MANITOU maintenance contract
2 levels of maintenance adapted to your needs. You are sure of:
always in good working condition
▪ equipment
a
reduction
of repair costs as a result of regular servicing
▪ authentic standardised
services
▪
▪ Labour
nce costs
▪ Attenda
▪ Labour
ce costs
▪ Attendan
lubricants
d
an
ts
ar
▪P
MANIPLUS extension of guarantee
With MANIPLUS you can take out an extension of guarantee of 12 or 24 months.
EASY MANAGER
A simple and flexible system for fleet management (with or without geolocation) to
provide optimum service from your machines. EASY MANAGER gives you:
materials management
▪ real-time
and easy way of managing your machinery activity and maintenance.
▪ simple
maximise
your asset and safeguard your equipment
▪
MANITOU spare parts
Utilising genuine MANITOU spare parts is sure to prolong the best performance capability of your machine.
Your MANITOU dealer has access to a stock of 70,000 part numbers, available in 24 hours in Europe (48 hours outside Europe).
10
Transmission
Reversing shift
Number of gears (forward/reverse)
Max. travel speed
(may vary according to applicable regulations)
Steering mode
Controls
3500 kg
7.75 m
4.45 m
6264 daN
Machine on tyres with forks
7.75
40°
6.6 secs
6.0 secs
6.0 secs
5.6 secs
3.2 secs
3 secs
400/80-24
50°
8
60°
68°
D
C
7
B
6
30°
A
5
4
4/4
3/2
26 kph
25 kph
20°
3
10°
2
1
0°
-3°
2000KG
2500KG
3000KG
3500KG
Oil immersed multi-disc braking on
front/rear axles
Automatic Negative Handbrake
PERKINS - STAGE 3B
854E-34TA
3400 cm3
102 HP/75 kW
420 Nm - 1400 rpm
direct
water
8200 daN
6200 daN
torque converter
hydrostatic
4 wheel drive
4 wheel drive
electrohydraulic control
1500KG
Service brake
Parking brake
Engine
Type
Cubic capacity
Power
Max. torque
Injection
Cooling
Laden drawbar pull
standard EN1459 annex B
1200KG
Lifting
Max. capacity
Max. lifting height
Max. outreach
Break-out force with bucket
Unladen time
Lifting
Lowering
Extension
Retraction
Crowd
Dump
Tyres
Braking
Rough terrain load chart
MT 835 H
1150KG
MT 835
C
B
0m
D
5
4
A
3
0.5m
2
1
0m
4.25
2.95 1.95 1.50
4.45 3.70
2.45 1.70
4 wheel steer - 3 Steering Modes
JSM® Joystick multi - function
Load Limiter Cut off system - EN15000 Norm
Hydraulics
Pump
Capacities
Hydraulic oil
Fuel
Unladen weight (with forks)
Dimensions
1. Front wheel centre to carriage
2. Ground clearance
3. Overall length to carriage
4. Wheelbase
5. Rear wheel centre to rear face
6. Overall width of cab
7. Inside tyre width
8. Overall width
9. Overall height
Standard forks (length x width x thickness)
Turning radius (over tyres)
Carriage rotation (crowd/dump)
Noise and vibration
Noise at driving position (LpA)
Environmental noise (LwA)
Vibration to whole hand/arm
Vibration on driver's body
gear type with priority valve
125 l/min - 270 bar
175 l
120 l
7200 kg
2
4
1
5
3
7300 kg
1.49 m
0.41 m
5.24 m
2.88 m
0.87 m
0.88 m
1.87 m
2.28 m
2.42 m
1200 x 125 x 45 mm
3.85 m
12° / 114°
6
9
7
82 dB
106 dB
<2.5 m/s2
2 m/s2
8
This brochure describes versions and configuration options for Manitou products which may be fitted with different equipment. The equipment described in this brochure may be standard, optional or not available depending on version. Manitou reserves the right
to change the specifications shown and described at any time and without prior warning. The manufacturer is not liable for the specifications given. For more information, contact your Manitou dealer. Non-contractual document. Product descriptions may differ
from actual products. List of specifications is not comprehensive. The logos and visual identity of the company are the property of Manitou and may not be used without authorisation. All rights reserved. The photos and diagrams contained in this brochure are
provided for information only.
MANITOU BF SA - Limited company with board of directors - Share capital: 39,547,824 euros - 857 802 508 RCS Nantes
FT056EN_B_0413_MT835.indd
11
MT 1135
Lifting
Max. capacity
Max. lifting height
Max. outreach
Break-out force with bucket
Unladen time
Lifting
Lowering
Extension
Retraction
Crowd
Dump
Tyres
Braking
Service brake
Parking brake
Engine
Type
Cubic capacity
Power
Max. torque
Injection
Cooling
Laden drawbar pull
MT 1135 H
MT 1135 HA
3500 kg
11.05 m
7.75 m
6305 daN
8.5 secs
7.0 secs
13.0 secs
9.0 secs
3.0 secs
3.0 secs
400/80-24
Oil immersed multi-disc braking on front/rear axles
Automatic Negative Handbrake
PERKINS - STAGE 3B
854E-34TA
3400 cm3
102 HP/75 kW
420 Nm - 1400 rpm
direct
water
9150 daN
7150 daN
torque converter
hydrostatic
4 wheel drive
4 wheel drive
electrohydraulic control
4/4
3/2
Transmission
Reversing shift
Number of gears (forward/reverse)
Max. travel speed
26 km/h
(may vary according to applicable regulations)
Steering mode
25 km/h
4 wheel steer - 3 Steering Modes
JSM® Joystick multi - function
Load Limiter Cut off system - EN15000 Norm
Controls
Hydraulics
gear type with priority valve
125 l/min - 270 bar
Pump
Capacities
Hydraulic oil
Fuel
Unladen weight (with forks)
Dimensions
1. Front wheel centre to carriage
2. Ground clearance
3. Overall length to carriage
4. Wheelbase
5. Rear wheel centre to rear face
6. Overall width of cab
7. Inside tyre width
8. Overall width
9. Overall width (stabilizers lowered)
10. Overall height
Standard forks (length x width x thickness)
Turning radius (over tyres)
Frame levelling
Carriage rotation (crowd/dump)
Noise and vibration
Noise at driving position (LpA)
Environmental noise (LwA)
Vibration to whole hand/arm
Vibration on driver's body
175 l
120 l
8800 kg
8900 kg
1.60 m
0.41 m
5.37 m
2.88 m
0.89 m
0.88 m
1.87 m
2.28 m
2.28 m
2.42 m
1200 x 125 x 45 mm
3.85 m
+/- 10°
16°/110°
82 dB
106 dB
<2.5 m/s2
2 m/s2
6
10
2
4
1
3
5
7
8
9
FT057EN_A_0313_MT1135.indd
12
Rough terrain load chart
standard EN1459 annex B
Machine on tyres with forks
50°
68°
E
40° 11
3000 KG
10.75
60°
10
9
D
C
8
30°
B
400 KG
3
10°
2
1
0°
-3°
600 KG
4
2000 KG
2500 KG
1000 KG
5
20°
1500 KG
6
A
3500 KG
7
0
0.5m
-1
8
7
6
5
4
3
2
1
6.85
5.35 4.15 2.80 2.05
7.75
3.35 2.35
0m
Machine on stabilizers with forks
50°
60°
72°
E
11.05
11
40°
10
D
C
9
8
7
6
5
1200 KG
4
3
10°
1°
2
1600 KG
20°
3500 KG
B
2000 KG
2500 KG
3000 KG
30°
A
1
0
-1
0.5m
8
7.60
7
6
5.65
6.50
5
4
3
2
1
0m
3.75
4.25
4.85
This brochure describes versions and configuration options for Manitou products which may be fitted with different equipment. The equipment described in this brochure may be standard, optional or not available depending on version. Manitou reserves the right
to change the specifications shown and described at any time and without prior warning. The manufacturer is not liable for the specifications given. For more information, contact your Manitou dealer. Non-contractual document. Product descriptions may differ
from actual products. List of specifications is not comprehensive. The logos and visual identity of the company are the property of Manitou and may not be used without authorisation. All rights reserved. The photos and diagrams contained in this brochure are
provided for information only.
MANITOU BF SA - Limited company with board of directors - Share capital: 39,547,824 euros - 857 802 508 RCS Nantes
FT057EN_A_0313_MT1135.indd
13
MT 1335
Lifting
Max. capacity
Max. lifting height
Max. outreach
Break-out force with bucket
Unladen time
Lifting
Lowering
Extension
Retraction
Crowd
Dump
Tyres
Braking
Service brake
Parking brake
Engine
Type
Cubic capacity
Power
Max. torque
Injection
Cooling
Laden drawbar pull
MT 1335 H
MT 1335 HA
3500 kg
12.55 m
8.75 m
6400 daN
9.8 secs
8.2 secs
14.2 secs
9.7 secs
2.7 secs
2.8 secs
400/80-24
Oil immersed multi-disc braking on front/rear axles
Automatic Negative Handbrake
PERKINS - STAGE 3B
854E-34TA
3400 cm3
102 HP/75 kW
420 Nm - 1400 rpm
direct
water
9800 daN
7800 daN
torque converter
hydrostatic
4 wheel drive
4 wheel drive
electrohydraulic control
4/4
3/2
Transmission
Reversing shift
Number of gears (forward/reverse)
Max. travel speed
26 km/h
(may vary according to applicable regulations)
Steering mode
25 km/h
4 wheel steer - 3 Steering Modes
JSM® Joystick multi - function
Load Limiter Cut off system - EN15000 Norm
Controls
Hydraulics
Pump
Capacities
Hydraulic oil
Fuel
Unladen weight (with forks)
Dimensions
1. Front wheel centre to carriage
2. Ground clearance
3. Overall length to carriage
4. Wheelbase
5. Rear wheel centre to rear face
6. Overall width of cab
7. Inside tyre width
8. Overall width
9. Overall width (stabilizers lowered)
10. Overall height
Standard forks (length x width x thickness)
Turning radius (over tyres)
Frame levelling
Carriage rotation (crowd/dump)
Noise and vibration
Noise at driving position (LpA)
Environmental noise (LwA)
Vibration to whole hand/arm
Vibration on driver's body
gear type with priority valve - 125 l/min - 270 bar
175 l
120 l
8800 kg
8900 kg
1.80 m
0.41 m
5.86 m
2.88 m
1.18 m
0.88 m
1.87 m
2.28 m
2.28 m
2.42 m
1200 x 125 x 45 mm
3.85 m
+/- 10°
12°/114°
82 dB
106 dB
<2.5 m/s2
2 m/s2
6
10
2
4
1
3
5
7
8
9
FT030EN_C_0413_MT1335.indd
14
Rough terrain load chart
standard EN1459 annex B
Machine on tyres with forks
50°
60°
Machine on stabilizers with forks
71°
50°
14
E
10
9
B
30°
8
2
1
0°
-3°
A
A
7
6
20°
5
4
3
10°
2
1
1°
0
0
-1 10
B
8
2000KG
2500KG
3000KG
600KG
3
300KG
10°
400KG
4
800KG
1000KG
1200KG
1600KG
2000KG
2500KG
5
KG
00
30
KG
00
5
3
C
3500KG
9
6
D
11
C
7
E
1600KG
10
20°
75°
12
40°
D
11
30°
70°
13
12.55
1200KG
13
40° 12
1000KG
12.30
60°
14
9
8
7
6
5 4
3 2
1
8.75 7.30
5.60 4.25 3.05 1.85
8.25
6.35 5.10 3.65
2.25
2.55
-1
0m
0.5m
10
9
8 7
6
5
4
8.75
6.75 5.20
8.05
5.85 4.55
3
2
1
1.80
0m
Machine on stabilizers with platform
(MT 1335 HA versions)
16
EN 280
15
14
13
12
14.40m
11
12.40m
10
kg +
9
=700kg
kg +
=365kg
kg + =150kg
8
60°
7
5
30°
4
3
2
70° 75°
50°
40°
6
5.78m
20°
0kg
kg +
=1000kg
10°
1
0°
0
-1
11 10 9
8
7
6
5
4
3
2
1
0 -1 -2 -3 -4
This brochure describes versions and configuration options for Manitou products which may be fitted with different equipment. The equipment described in this brochure may be standard, optional or not available depending on version. Manitou reserves the right
to change the specifications shown and described at any time and without prior warning. The manufacturer is not liable for the specifications given. For more information, contact your Manitou dealer. Non-contractual document. Product descriptions may differ
from actual products. List of specifications is not comprehensive. The logos and visual identity of the company are the property of Manitou and may not be used without authorisation. All rights reserved. The photos and diagrams contained in this brochure are
provided for information only.
MANITOU BF SA - Limited company with board of directors - Share capital: 39,547,824 euros - 857 802 508 RCS Nantes
FT030EN_C_0413_MT1335.indd
15
Your nearest MANITOU dealer:
Head office:
B.P. 249 - 430 rue de l’Aubinière - 44158 Ancenis Cedex - France
Tel: 00 33 (0)2 40 09 10 11 - Fax: 00 33 (0)2 40 09 10 97
www.manitou.com
700506EN_B_0413_MT8_11_13.indd