X605 Powerful Performance with Maximum Installation

X 605
Powerful Performance with
Maximum Installation Flexibility
Optoma X605 was designed to deliver extraordinary
performance and reliability to satisfy large venue projector install
needs. Its powerful 6000 lumens bright output combined with 10,000:1
contrast ratio deliver amazingly bright, color-rich presentations with
sharp, clear text and graphics. Also, X605 provides DICOM Sim. Display
mode for improving the medical training program or discussion by enrich the
gray-scale and details of the medical images.
6000 Lumens, XGA Resolution
Installation flexibility – Full Lens shift, changeable optional lens design(Standard/Wide/Tele)
Ultimate Control – Full support for Crestron, Extron, AMX, PJ-Link and Telnet LAN commands
Advanced features – Wired Remote, Full 3D Support and Support DICOM Sim. Display Mode
System Integration Control
Installation Flexibility
Multiple X605 can be monitored over LAN and can also provide the user with
an email message alert in case an error occurs or a lamp fails or needs to be
replaced using Crestron Roomview. The web browser interface and full
support for Telnet, Extron’s IP Link, AMX dynamic device discovery and
PJ-Link protocols, allow almost all aspects of the X605 to be controlled
across a network, keeping you in control, wherever you are.
To help meet the seemingly limitless challenges of ProAV installations, the
X605 provides multiple lens options with zoom and focus adjustment to
ensure you can get the image size you require, while a wide lens shift range
helps you get the image exactly where you want it.
DICOM Sim. display mode
3D Technology + RF glasses
Designed specifically for larger meeting rooms and lecture theatres, the X605
includes a special DICOM Sim. mode that has been specifically tuned for
viewing greyscale images, perfect for viewing X-rays and scans during
medical training.*
Using the inherent speed of DLP®
technology, X605 can output video and
images at an astonishing rate of 144Hz,
allowing you to show full screen, full color,
stereoscopic 3D. Within DLP® Link™
technology, the 3D glasses synchronise with the image on screen to filter
each stream to the correct eye; your brain then combines the two streams to
make them jump into life. X605 supports multiple 3D formats from various
devices such as PC, Blu-ray 3D™, Sony® PS3, Microsoft® Xbox 360 or 3D
TV broadcast system. Furthermore, X605 has built in with VESA 3D port, is
compatible with both DLP and radio frequency 3D glasses. Radio frequency
is providing outstanding 3D performance especially for long distance and
large venue.
DICOM Sim. display mode
DICOM Sim. display mode
*X605 is not suitable for use in medical diagnosis.
Input/Output Connections
01.Power On/Off
02.VGA 1
06.DisplayPort 07.RJ45 LAN
08.3D VESA
09.USB Power
10.VGA Out
15.Composite Video
16.Wired Remote
13.Component Video 14.S-Video
17.+12V Trigger
Display Technology
Native Resolution
04.VGA 2
18.Master Switch
Texas Instruments DLP
technology / 0.7” XGA DMD Chip
Native: 1024 x 768 (XGA)
Support Computer signal up to UXGA (1600 x 1200) 60Hz
6000 ANSI Lumens
Contrast Ratio
2000 :1
Display Colors
1073 million colors
Projection Lens
f=22.8 – 28.5 mm, F/2.46~2.56(STD lens) manual zoom & focus
Image Size
25 to 299 inches (4:3)
Throw Ratio
1.6 ~ 2.0:1 (Projection distance/width) 1.25X STD Lens
2.0 ~ 3.0:1 (Projection distance/width) 1.5X Long throw Lens
0.8:1 (Projection distance/width) Fixed wide lens
± 20° Vertical in System
4:3 Native, 16:9 Compatible
Aspect Ratio
Computer Compatibility
*3D Compatibility
UXGA, SXGA+,SXGA,XGA,SVGA,VGA Compression, VESA standards; PC & Macintosh compatible
Video:480i & HDMI 1.4b Blu-ray 3D
HDMI(support audio input) x1,DVI-D x1,DisplayPort x1,VGA(YPbPr/ RGB) x2, Composite Video x1,Mini-jack Audio in x3,RCA-Audio In x2, BNC x1,
I/O Connections
Component x1,VGA out x1, Audio output(Mini-jack) x1, 3D VESA Port x1, RS232 Control x1, RJ45 (LAN for network control) x1, Wired Remote Port x1,
USB (Remote mouse/service) x1, USB(Charge +1.5A), +12V Relay output x1
3W speaker
85 %
37 dB (STD mode)
Lamp Life
3500 hrs (STD mode)/ 1500 hrs(Bright mode)
Power Supply
Universal AC 100 ~ 240V, 50/60Hz @110VAC
430 x 340 x 183 mm
*Optoma reserves the right to change this brochure without prior notice, please refer to www.optoma.com for any change
*Optoma guarantees that in normal use,Optoma DLP® color quality will be indistinguishable from when new. Please note that worn lamps will give slight variance. Exclusions: (1) Guarantee is voided if the projector is subject to damage
through mis-use. (2) Guarantee may be void in industrial or commercial entertainment environments where dust or smoke is particularly excessive (3) Guarantee will not apply if lamp brightness is below 50% due to wear or if the projector
is not working due to other fault. Typical lamp life achieved through testing. Will vary according to operational use and environment conditions. Optoma guarantees that in normal use, the DLP® imager guarantee will retain quality for at least
5 years providing consistent pixel performance. Exclusions: (1) Guarantee is voided if the projector is subject to damage through mis-use. (2) Guarantee may be void in industrial or commercial entertainment environments where dust or
smoke is particularly excessive. Copyright © 2012, Optoma Corporation. All other product names and company names used herein are for identifications purposes only and may be trademarks or registered trademarks of their respective
owners. Errors and omissions excepted, all specifications are subject to change without notice. DLP®, BrilliantColor™ and the DLP logo are registered trademarks of Texas Instruments.
Download PDF