PORTABLE
CD/MP3 DISC PLAYER
WITH
40 SECONDS ANTI-SHOCK SYSTEM
(DOT MATRIX LCD DISPLAY)
INSTRUCTION MANUAL
LOCATION OF CONTROLS
1.
2.
3.
4.
5.
6.
7.
8.
9.
10.
11.
12.
13.
14.
15.
LCD DISPLAY
MODE / PROG BUTTON
EQ BUTTON
ASP / DIR UP BUTTON
SKIP / SEARCH DOWN BUTTON
OPEN KNOB
SKIP / SEARCH UP BUTTON
STOP / (POWER OFF) BUTTON
PLAY / PAUSE (POWER ON) BUTTON
DC JACK
HOLD SWITCH
BATTERY DOOR
HEADPHONE JACK
VOLUME
BASS BOOST SWITCH
1
10
2
13
14
11
3
12
15
4
9
8
5
6
7
CAUTION
USE OF CONTROLS OR ADJUSTMENTS OR PERFORMANCE OF PROCEDURES
OTHER THAN THOSE SPECIFIED HEREIN MAY RESULT IN HAZARDOUS
RADIATION EXPOSURE.
THIS SHOULD NOT BE ADJUSTED OR REPAIRED BY ANYONE EXCEPT QUALIFIED
SERVICE PERSONNEL.
— 1 —
PREPARATIONS BEFORE USING
Battery Installation
1. Open Battery Compartment cover.
2. Insert 2 batteries (LR6, “AA” size, or equivalent)
in the correct polarity as indicated.
(Heavy duty batteries are recommended.)
3. Close the cover properly.
AC Power Adaptor
1. Plug the DC output of the adaptor to the DC Jack.
2. Connect the adaptor (4.5V/600mA) to a power outlet.
Make sure the voltage is compatible.
DISC PLAYING
This CD player is designed to play the 8cm and 12cm compact disc without using adaptor.
Hold Switch
Set the HOLD button to “ON” position, all the buttons will be locked. Before operation, be sure
to set the switch to “OFF” position, for normal operation.
Getting Start
1. Insert the headphone/earphone plug to PHONE JACK.
2. Push the OPEN button to right side, and then the door open, put a disc into the
CD compartment with label side upward.
3. Push the disc gently around the centre area until it clicks so that the disc fits
into the pivot.
(To remove the disc : Pick up the disc, holding the edge, while pressing the
pivot gently.)
4. Close the door and press the PLAY/PAUSE button once.
5. The Display will show the total number of tracks of the disc, then begin to play
the first track.
General Operation
Play/Pause Buttons
Stop Button
Skip / Search Buttons
ASP / Directory UP Button
— Press once to start playback in the original
order.
Press again to stop the disc play
temporarily.
— Press once to stop playback.
Press again to turn off power
— Press once to skip to next track
or
back to previous track
.
— Press continuiously to search forward
or backward
.
— ASP ON/OFF (For CD Disc).
— Directory UP (For MP3 Disc).
— 2 —
Various Playing Modes
MODE/PROG Button — There are 3 kinds of functions : (FOR CD DISC)
A. Repeat Play
During PLAY mode
• Press the MODE/PROG button once to play the current track repeatedly.
• The repeat indicator
will appear in the display.
During PLAY mode
• Press the MODE/PROG button twice to play the entire disc repeatedly.
• The repeat indicator
will appear in the display.
NOTE -
To cancel REPEAT simply press the MODE/PROG button until the repeat
indicator disappears.
B. Random Play
During PLAY mode
• Press the MODE/PROG button 3 times.
• The RND will appear in the display.
• Press the PLAY button, all tracks on the disc will be played in random sequence. After all
the tracks have been played the system will stop automatically.
NOTE -
To cancel RANDOM PLAY simply press the MODE/PROG button until the
RND indicator disappears.
C. Intro Scan
During PLAY mode
• Press the MODE/PROG button 4 times.
• The INT indicator will appear in the display.
• Press the PLAY button to play the first 10 seconds of each track on the disc.
NOTE -
To cancel INTRO SCAN simply press the MODE/PROG button until the
INT indicator disappears.
MODE/PROG button - there are 3 kinds of functions: (FOR MP3 DISC)
A. Repeat Play
1. During PLAY mode
• Press the MODE/PROG button once to play the current track repeatedly.
• The repeat indicator
will appear in the display.
2. During PLAY mode
• Press the MODE/PROG button twice to play the current DIRECTORY repeatedly.
• The repeat indicator
will appear in the display.
3. During PLAY mode
• Press the MODE/PROG button three times to play the ENTIRE DISC repeatedly.
• The repeat indicator
will appear in the display.
NOTE - To cancel REPEAT simply press the MODE/PROG button until the repeat
indicator disappears.
— 3 —
B. Random Play
During PLAY mode
• Press the MODE/PROG button 4 times.
• The RND will appear in the display.
• Press the PLAY button, all the files on a disc to be played in a random sequence
and after all files are played, system will stop automatically.
NOTE -
To cancel RANDOM PLAY simply press the MODE/PROG button until the
RND display disappears.
C. Intro Scan
During PLAY mode
• Press the MODE/PROG button 5 times.
• The INT indicator will appear in the display.
• Press the PLAY button to play the first 10 seconds of each file on the disc.
NOTE -
To cancel INTRO SCAN simply press the MODE/PROG button until the
INT indicator disappears.
PROGRAM PLAY (FOR CD DISC)
1. In stop mode, press the MODE/PROG button to make program memory.
2. “ PGM CD 00 P01” will be displayed, “00” means track number to memory and
“P01” means program number.
or
button to select the desired track.
3. Press
4. Press the MODE/PROG button to enter the track into memory, the program
numbers which will be increment one step.
* The program no. “P01” has become “P02” on the display.
5. Repeat step 3 and 4 until memory is full.
6. Press
button to start the program play.
7. To stop the program play, press the STOP button.
8. For program play in step “ 7 ” , press the MODE/PROG button &
button.
9. To erase the program memory, TURN off the power or open the door.
PROGRAM PLAY (FOR MP3 DISC)
1. In stop mode, press the MODE/PROG button to make program memory.
2. “ PGM 00 000 P01 ” will be displayed. “ 00 ” means DIRECTORY number,
“ 000 ” means file number, “P01” means program number.
3. Press the ASP/DIR button to select the desired directory.
or
button to select the desired file.
4. Press
5. Press the MODE/PROG button to enter the DIRECTORY and file into memory.
The program number which will be increment one step.
* The program no.“P01” has become “P02” on display.
6. Repeat step 3 to 5 until memory is full (UP TO 60 FILES).
— 4 —
7. Press
button to start the program play.
8. To stop the program play, press the STOP button.
9. For program play in step “ 8 “, press the MODE/PROG button &
button.
10. To erase the program memory, turn off the power or open the door.
* If you do not need to select directory, only select files, the above step 3 can
pass.
DIGITAL ANTI-SHOCK OPERATION
The DIGITAL ELECTRONIC SHOCK PROTECTION function uses semiconductor
memory to prevent the second from skipping when the unit is subjected to shocks
and vibration during play.
When the PLAY/PAUSE button is pressed and the power turns on, the Digital Electronic
Shock Protecyion function tums on automatically.
It will give approximately 40 seconds (MP3 120seconds) of protection against
interruption of sound output, if the player is subjected to shocks of more than 40
seconds duration, some interruption of sound output will occur, this is normal and
to be expected, the sound will resume once the player has stabilized from the
shock.
•
•
To turn this function off, press ASP/DIR button once, the ASP indicator will
disappear.
In MP3 disc always has the ASP function and the ASP time is 120 seconds at
128 Kbps bit rate.
BBS (BASS BOOST SYSTEM) FUNCTION
Set the BBS button to on position to enhance the bass effect.
PRESET EQUALIZER FUNCTION
Press the EQ button activates 4 Kinds of sound effect as follows:
NORMAL
CLASSIC
ROCK
JAZZ
POP
* The EQ indicator will appear on the display.
NORMAL
MAINTENANCE
Cleaning the Lens
If the lens becomes dusty, clean it with camera lens blower. Be careful not to scratch the
surface of the lens.
Cleaning the Cabinet
From time to time, clean the cabinet with a soft dry cloth. For more stubborn stains, slightly
moisten the cloth with water or a mild detergent solution. Never use benzene, alcohol or other
solvents as they may damage the finish of the cabinet.
— 5 —
SPECIFICATIONS
Output Power
Freq. Response
Power Source
Dimensions
:
20MW (32 )
: 100 ~ 20000 Hz
: 2 x UM-3 or AA size batteries
4.5V (600mA) AC - DC adaptor
: 142(W) x 142(D) x 33(H) mm
** For improvement purposes, specification and design are subject to change without
notice. **
— 6 —
TROUBLE SHOOTING GUIDE
Cleaning the Disc
When a disc becomes dirty, clean it with a cleaning cloth. Wipe the disc from the
center out.
Note - Do not use solvents such as benzine, thinner, commercially available cleaners
or anti-static spray intended for analogue discs.
** Should you experience difficulties in the use of this player please refer to the
following chart before contacting your dealer or the place of purchase.
— 7 —
BRAND : NO BRAND
JOB NO. : M03XXX
MODEL : DM0530-1(40)MP31
SIZE : 98mm (W) x 137 mm (H)
18-SEP-2003 by FAI
Download PDF

advertising