OBi110 Voice Service Bridge and Telephone Adapter

Detailed Technical Specifications
OBi110 Voice Service Bridge and Telephone Adapter
with SIP, Google Voice™, OBiTALK, Telephone & Phone Line Interfaces
With the OBi110, you are in control of your digital & analog communications life. Via the OBi110’s on-board
connections as well as via the Internet to other OBi endpoints via Obihai’s free OBiTALK network or up to two (2)
available VoIP services, you have the power to bridge mobile, fixed line and Internet telephone services.
The OBi110 is a dedicated device, built with a high-performance system-on-a-chip platform to ensure high quality
voice conversations. The OBi110 has high availability and reliability because it is always-on to make or receive a call.
With the OBi110, a computer is not required and a computer does not need to be on to talk to people. To get
started, all you need is a phone, power and a connection to the Internet.
The OBi110 Is Complemented by Other OBi Products & Services
OBiTALK: A customer portal for device management allowing members to add people and associated OBi endpoints
to “circles of trust” such that additional functionality can be shared amongst authorized users. The OBiTALK portal is
also where members can download the OBiAPP and OBiON applications for PCs and the iPhone, iPad, iPod touch &
Android devices, respectively.
OBiON iPhone, iPad, iPod touch & Android Devices: An application for iPhone, iPad, iPod touch and Android devices
which makes possible placing and receiving calls to/from other OBi endpoints.
OBiOn PC: A middleware application for a PC that facilitates placing and receiving calls to/from other OBi endpoints.
Key Features of the OBi110 Voice Service Bridge and Telephone Adapter:
Aggregation and Bridging of Two (2) SIP and/or Google Voice, One (1) OBiTALK & One (1) Land Line (POTS) Services
Automatic Attendant for Simplified Call Routing (AA)
Call Back Service – Connect to AA to Make a New Call or Ring the Attached Phone
OBiTALK Web Portal Integration
Configuration and Management of OBi Endpoints
Download OBi Client Applications for Smart Phones, Internet Devices & PCs
Creating & Joining Circles of Trust So You Can Share Your OBi
Setting Up Your OBi Endpoint Speed Dial Directory
Configurable to Work with Any SIP Compliant Internet Telephone Service
Configurable to Work with Most Loop Start Analog Telephone Lines
Analog Phone & Telephone Line Impedance Agnostic
Robust Telephony Features:
Message Waiting Indication - Visual and Tone Based
Speed Dialing of 99 OBi Endpoints or Numbers
Three Way Conference Calling with Local Mixing
Hook Flash Event Signaling
Caller ID – Name & Number
Caller ID Spoofing
Call Waiting
Call Forward - Unconditional
Call Forward on Busy
Call Forward on No Answer
Call Transfer
Anonymous Call
Block Anonymous Call
Do Not Disturb
Call Return
Repeat Dialing
Powerful Call Routing & Voice Service Features:
SIP Support for Voice and Fax Over IP from Internet Telephony Service Providers
OBiTALK Managed VoIP Network for OBi Endpoint Devices & Applications
High Quality Voice Encoding Using G.711, G.726, G.729 Algorithms
Recursive Digit Maps & Associated Call Routing (Outbound, Inbound)
Service Continuity in Case of Network Failure (Configurable)
Browse Obihai Devices
Hardware Designer
Obihai Technology, Inc.
Model Name
Release Date
November 2010
Chip Vendor
Obihai SoC
Width of Machine Word
32 bit
Instruction Set
FXS SLIC (Subscriber Line Integrated Circuit) & FXO Subsystem
Ringer Specifications
Ring Frequency: 14Hz – 68Hz
Ring Waveform: Trapezoidal, Sinusoidal
Ring Voltage: 55v – 85v
Maximum Ring Load
5 REN (Ringer Equivalence Number)
Configuration Settings
Recursive Digit Map & Associated Outbound Call Routing
On-Hook Tip Ring Voltage: 30v – 52v
Off-Hook Current Max: 15mA – 45mA
Impedance: 12 Independent Settings
DTMF Playback Level: -90 dBm – 3dBm
Caller ID Method (FSK Bell202, FSK V.23, DTMF FI/SE/DK)
Caller ID Trigger (Before / After First Ring, Polarity Reversal)
Channel Tx Gain: -12dB – 12dB
Channel Rx Gain: -12dB – 12dB
Silence Detect Sensitivity
Hook--Flash Time Max
HookFlash Time Min
CPC Delay Time
CPC Duration
Idle Polarity
Connect Polarity
Configuration Settings
Recursive Digit Map & Associated Inbound Call Routing
Ring Delay
Detect CPC
CPC Time Threshold
Detect Polarity Reversal
Detect Far End Long Silence
Detect Near End Long Silence
Silence Detect Sensitivity
Silence Time Threshold
Detect Disconnect Tone
Disconnect Tone Pattern – Programmable
AC Impedance: 16 Settings
On-Hook Speed: 0.5ms, 3ms (ETSI), 26 (AU)
Tip-Ring Voltage: 3.1v, 3.2v, 3.35v, 3.5v
Min Operational Loop Current: 10mA, 12mA, 14mA, 16mA
Current Limiting Enable
Channel Tx Gain
Channel Rx Gain
Line In-Use Voltage Threshold
Line In-Use Current Threshold
Caller ID Detect Method: FSK (Bell 202), FSK (V.23), DTMF (FI, SE, DK)
DTMF Playback Level
FXO (LINE Port) Ring Detection
Ring Detection
Ring Frequency Min
Ring Frequency Max
Ring Threshold: 40.50-49.50 Vrms, 19.35-23.65 Vrms, 13.50-16.50 Vrms
Ring Validation Time: 8 Settings
Ring Indication Delay Time: 8 Settings
Ring Timeout: 15 Settings
Ringer Impedance: High, Synthesized
Management – Configuration
Local Access Interface
IVR, Web Page – Password Protected (Admin & User Level Log-in)
Remote Access Interface
Syslog (Multi-Level Granularity), Invokable via SIP Notify, Web, Provisioning
Device Web Page Standard
HTTP v1.1, XML v1.0
Remote Provisioning
XML via TFTP or HTTP, TR069 / TR104
Secure Remote Provisioning
SSL via HTTPS , Encrypted XML via HTTP or TFTP – Dedicated User Name &
Secure Remote Firmware Update
Encrypted Binary File via TFTP or HTTP + Dedicated User Name & Password
OBi-ZT: Obihai Zero-Touch Automatic Customization & Configuration **
Call History (CDRs)
Call Detail Records on OBi Web Page, Export to XML
LED Indications
Power, Device Status, Upgrade in Progress Status, Ethernet Activity, PHONE Port
Status, LINE Port Status
RTP Statistics
RTP Transport Type
Audio Codec Type (Tx/Rx)
RTP Packetization - ms (Tx/Rx)
RTP Packet Count (Tx/Rx)
RTP Byte Count (Tx/Rx)
Peer Clock Differential Rate - PPM
Packets In Jitter Buffer
Packets Out-Of-Order
Packets Interpolated
Packets Late (Dropped)
Packets Lost
Packet Loss Rate %
Packet Drop Rate %
Jitter Buffer Length - ms
Received Interarrival Jitter - ms
DTMF Digits Received
Jitter Buffer Underruns
Jitter Buffer Overruns
Sequence Number Discontinuities
Skew Compensation - ms
Session Information
SIP Session Status
OBiTALK Status
Phone Port Status
Line Port Status
Primary SIP Service Set-Up Wizard
Dedicated Device Web Page for Quick ITSP Account Set-Up
System Settings Back-Up / Restore
Save & Restore Configuration via XML file to / from a Local Folder
Local Access Interface
IVR Password
Remote Access Interface
User Name & Password Access via HTTP, TFTP – HTTPS
Device Web Page Standard
HTTP v1.1, XMLv1.0
Secure Remote Provisioning
Network – Application Details / Data Networking – Continued …
Network – Application Details
Data Networking
MAC Address (IEEE 802.3)
UDP (RFC 768)
TCP (RFC 793)
IP version 4 (RFC 791) – Static IP and DHCP Support
ICMP (RFC 792)
ARP - Address Resolution Protocol
RTP (RFC 1889, 1890)
RTCP (RFC 1889)
DHCP Client (RFC 2131)
DiffServ (RFC 2475) – Independently Configured: Service, SIP & Media
ToS (RFC 791, 1349) – Independently Configured: Service, SIP & Media
VLAN Tagging (802.1p) – Independently Configured: Service, SIP & Media
SNTP (RFC 2030) – Primary & Secondary NTP Servers
SIPv2 (RFC 3261, 3262, 3263, 3264)
SIP over UDP
SIP over TCP
SIP over TCP with TLS
2 SIP Service Provider Service Sessions – Concurrent Operation
2 XMPP (Google Voice) Sessions
1 OBiTALK Service Session
SIP Proxy Redundancy – Local or DNS Based SVR, Primary & Secondary Fallback List
Restrict Source IP Address
Fail-over to FXO on Primary and/or Secondary SP Reg Failure - Selectable
Maximum Number of Sessions – Independent per Service
Trunk Groups (4)
Voice Gateway – Direct Dialing (8)
G.711 A-Law
G.711 µ-Law
G.726 (40/32/24/16)
Codec Pre-selection Code
Voice Processing per SIP Service – TX/RX Audio Gain, Echo Cancellation
Adjustable Audio Frames per Packet
Codec Name Assignment
Codec Profile per SIP SP (2) & OBiTALK Service
Dynamic Audio Payload
Packet Loss Concealment
Jitter Buffer (Adaptive)
SUBSCRIBE / NOTIFY Framework (RFC 3265)
NOTIFY Dialog, Line Status
SUBSCRIBE Message Summary
VoIP NAT Interworking
DATE Header Support
ALERT-INFO Header Support
Remote-Party-ID (RPID)
P-Asserted-Identity (PAID)
RTP Statistics in BYE Message
Media Loopback Support
Configurable Contact List (Inbound Call Routing)
Automatic Attendant (English) with Configurable Answer Delay
PIN Access Control to AA (Up to 4 PINs)
Recursive Digit Map for Call Routing (AA, Line, Phone, Voice Gateways, Trunk Groups)
AA Configurable Outbound Call Routing Rule
SIP Service Configurable Inbound Call Routing Rule (2)
Direct / Single-Stage Dialing (Route to Voice Gateway)
Fax Pass Through (G.711)
Network – Application Details / Telephony – Continued …
Modem Pass Through (G.711)
In-Band DTMF (G.711)
Out of Voice Band DTMF (RFC 2833)
Out of Voice Band DTMF (INFO Method)
Call Progress Tone Generation
Tone Profile per SIP SP and OBiTALK service
Ring Profile per SIP SP and OBiTALK service
Star Code Profile per SIP SP and OBiTALK service
Full Duplex Audio
G.165, 168 Echo Cancelation
VAD – Voice Activity Detection
Silence Suppression
Comfort Noise Generation
Three Way Conference Calling with Local Mixing
Hook Flash Event Signaling
Flash Hook Timer
Caller ID – Name & Number per Bellcore, ETSI and DTMF
MWI – Message Waiting Indicator
Visual Message Waiting Indication (VMWI)
Daylight Savings Time Support – North & South Hemispheres
Caller ID Enable /Disable
Caller ID Number
Caller ID Name (Alphanumeric)
Caller ID Spoofing
Call Waiting
Maximum Session Control
Call Forward - Unconditional
Call Forward on Busy
Call Forward on No Answer (Ring Count Configurable)
Call Transfer Enable / Disable
Anonymous Call Block
Anonymous Call
Do Not Disturb
Call Return
Repeat Dialing
Call Progress Tones
Configurable Call Progress Tone
Call Progress Tone Profiles (2)
Dial Tone
Busy Tone
Ringback Tone
Reorder Tone
Confirmation Tone
Holding Tone
Second Dial Tone
Stutter Tone
Howling Tone
Prompt Tone
Call Forwarded Tone
Conference Tone
SIT Tones (1-4)
Ringing & Call Waiting Tone Configuration
Ring Patterns (10) - Configurable
Call Waiting Tone Patterns (10) - Configurable
Call Waiting Tone Pattern Profiles (2)
Star Code Configuration
Configurable Start Codes
Star Code Profiles (2)
Call Return
Activate Block Caller ID
Deactivate Block Caller ID
Block Caller ID Once
Network – Application Details / Star Code Configuration – Continued …
Unblock Caller ID Once
Activate Call Forwarding (All Calls)
Deactivate Call Forwarding (All Calls)
Activate Call Forward on Busy
Deactivate Call Forward on Busy
Activate Call Forward on No Answer
Deactivate Call Forward on No Answer
Activate Block Anonymous Calls
Deactivate Block Anonymous Calls
Activate Call Waiting
Deactivate Call Waiting
Activate Do Not Disturb
Deactivate Do Not Disturb
Activate Repeat Dial
Deactivate Repeat Dial
Interfaces & Indicator Lights
Internet (WAN)
1 x 10/100BaseT Ethernet Port (802.3)
Phone (FXS)
1 x RJ-11 FXS Analog Phone Port
Line (FXO)
1 x RJ-11 FXO Analog Line Port
Reset Button
Yes – Located on Bottom of Case
4 – Power + Status, Ethernet Activity, Phone, Line
LED Indications
Power On, Device Status, Upgrade in Progress Status, Packet RX/TX, Phone Port Status
(Enabled, In-Use), Line Port Status (Enabled, In-Use)
FCC Part 15
Yes – Class B
FCC Part 68
Yes – Power Adapter
Operating Temperature
0º to 45º C (32º to 113º F)
Storage Temperature
-25º to 85º C (-13º to 185º F)
Operating Humidity
10% to 90% Non-condensing
Non-operating Humidity
10% to 90% Non-condensing
Physical Attributes
(width x depth x height)
11.5 x 11.0 x 3.0 centimetres
4.5 x 4.2 x 1.2 inches
Unit Weight
255 grams / 9 ounces
Shipping Weight
400 grams / 14 ounces (Including Power Supply, Cables and Packaging)
Desktop or Wall Mountable
Power Supply
Universal Switching with Fixed US, EU, UK or AU Style Plug Prongs (Model Dependent)
Input Power
AC Input: 100 to 240 Volts 0.3A 50-60Hz (26-34 VA)
Output Power
DC: +12V 1.0 Amp Max
Carton Specifications
Units Per Carton
20 Units
Carton Dimensions
(width x depth x height)
48.0 x 29.0 x 29.0 centimetres
19.0 x 11.4 x 11.4 inches
Carton Weight
8.6 Kilograms / 19 pounds
Cartons Per Std. 20 / 40 ft Container
768 / 1,613 Cartons – Non-palletized
Active Internet Connection
Analog Touch Tone Phone
Access to Internet Via a Switched Ethernet Port on Home or Office Router
(Optional) Access to an Analog Telephone (POTS) Line.
(Optional) Active Internet Phone Service Subscription with All Required SIP
Credentials to Make & Receive Calls
Quick Start / Installation Guide
User / Administrative Guide
Implementation Guide for Service Providers **
Package Contents
OBi110 Voice Service Bridge and Telephone Adapter
Power Adapter
1 x RJ-45 Ethernet Cable (80 inches / 203 centimeters)
1 x RJ-11 Telephone Cable (45 inches / 113 centimeters)
Quick Start / Installation Guide
1-Year Hardware (Limited)
Engineering & Design Location
California, USA
HST Code
Data Sheet State
All content subject to change.
This data sheet is not a warranty.
Data Sheet Version
** For Service Providers Only
∞ Available in Future with Firmware Update
iPhone, iPad and iPod touch are trademarkes of Apple Computer, Inc.
Google Voice and Android are trademarks of Google, Inc.
OBi, OBiAPP, OBiON and OBiTALK are trademarks of Obihai Technology, Inc.
All other trademarks metioned in this document are property of their respective owners.
This document is provided by Obihai Technology for planning purposes only. No warranty is implied.
Do Not Use For Emergency Service Calls
Obihai Technology does not warrant the availability or quality of the OBiTALK network. Furthermore, Obihai
Technology will not be liable to you or any third party for any costs or damages arising directly and or indirectly
from the use of thisproduct’s hardware & software including without limits any damage, or for any loss whatsoever.
©2010-2011 Obihai Technology, Inc. All rights reserved.