Refined Image Quality with System Expandability

Preliminary
as of February 2009.
DLP™-Based Projector
PT-DZ6710
PT-DZ6700
PT-DW6300S
PT-D6000S
Models without lenses (PT-DZ6710L/DZ6700L/
DW6300LS/D6000LS) are also available.
Available from April
New Standard for 1-chip DLP™ Projectors
Refined Image Quality with
System Expandability
6,500-lm brightness and
versatile functions for high reliability
PT-DW6300S
PT-D6000S
6000 lm
WXGA
6500 lm
XGA
*Black models are available as built-to-order.
High-resolution WUXGA and
excellent application flexibility
PT-DZ6710
PT-DZ6700
Vivid Picture Quality
with High Brightness
RGB Booster significantly improves
color reproduction while maintaining
high brightness.
High-resolution WUXGA*1 allows
compatibility with a wide range of signals.
Detail Clarity Processor realistically
reproduces even fine textures.
System Daylight View 2 produces sharp,
crisp images even in bright lighting.
*1 PT-DZ6710/DZ6700. *2 PT-DZ6710 only.
6000 lm
WUXGA
6000 lm
WUXGA
Easy Maintenance and
Superior Reliability
Auto Cleaning Filter reduces
maintenance hassles for 10,000 hours.
Dual Lamp System prevents image
interruptions even if a lamp burns out.
Liquid Cooling System allows use in
ambient temperatures as high as 45°C.
Sealed Optical Block prevents the
adverse effects caused by dust for greater
operating stability.
Geometric
Adjustment
HD-SDI
System Integration
Flexibility
Geometric Adjustment*2 corrects images
that are projected onto a curved screen.
The Multi-Screen Support System
seamlessly connects multiple images.
Flexible ±360° Installation in the vertical
direction for creative applications.
Powered Vertical/Horizontal Lens Shift
Function increases installation flexibility.
Optional Lenses covers a wide range of
projection distances.
Specifications
PT-DZ6710
Models
Power supply
Power consumption
DLP™ chip Panel size
Display method
Pixels
Lens
Lamp
Screen size
Brightness*3
Center-to-corner uniformity*3
Contrast*3
Resolution
Scanning RGB
frequency YPBPR (YCBCR)
S-Video/Video
Optical axis shift
Keystone correction range
Installation
Other features
Terminals DVI-D IN
RGB 1/YPBPR IN
RGB 2/YPBPR IN
VIDEO IN
S-VIDEO IN
SERIAL IN
SERIAL OUT
REMOTE 1 IN
REMOTE 1 OUT
REMOTE 2 IN
LAN
HD-SDI*4
Power cord length
Cabinet material
Dimensions (W x H x D)
Weight*5
Operating temperature
Operating humidity
Supplied accessories
PT-DZ6700
PT-DW6300
PT-D6000
North America: 120V AC 60Hz Europe, Asia: 220-240V AC, 50/60Hz
North America: 820W or less, Standby mode eco: 0.2W Standby mode normal: 8 W (Both with fan stopped)*1
Europe, Asia: 800 W or less, Standby mode eco: 0.3W Standby mode normal: 9 W (Both with fan stopped)*1
0.67˝ diagonal (16:10 aspect ratio)
0.65˝ diagonal (16:10 aspect ratio)
0.7˝ diagonal (4:3 aspect ratio)
DLP™ chip x 1, DLP™ system
2,304,000 (1,920 x 1,200) x 1, total of 2,304,000 pixels
1,024,000 (1,280 x 800) x 1, total of 1,024,000 pixels 786,432 (1,024 x 768) x 1, total of 786,432 pixels
Powered zoom/focus lenses (1.8– 2.4:1), F 1.7– 2.0, f 26.8 –35.7 mm
Powered zoom/focus lenses (1.8– 2.4:1), F 1.7– 2.0, f 25.6–33.8 mm
300 W UHM lamps (x 2) (dual lamp system)
50– 600 inches (50–200 inches with the ET-DLE055),
50– 600 inches (50–200 inches with the ET-DLE055), 16:10 aspect ratio
4:3 aspect ratio
6,500 lumens (dual lamp, high power mode)
6,000 lumens (dual lamp, high power mode)
90%
2,000:1 (full on/full off, contrast mode: high)*2
1,920 x 1,200 pixels
1,024 x 768 pixels
1,280 x 800 pixels
Horizontal: 15–91 kHz, Vertical: 50– 85 Hz, Dot clock: 162 MHz or lower
Horizontal: 15– 91 kHz, Vertical: 50– 85 Hz, Dot clock: 150 MHz or lower
525i (480i), 625i (576i), 525p (480p), 625p (576p), 750 (720)/60p, 750 (720)/50p, 1035/60i, 125 (1080)/60i, 1125 (1080)/50i,
1080/24p, 1080/25p, 1080/30p, 1080/24sF, 1080/60p, 1080/50p
Horizontal: 15.75/15.63 kHz, Vertical: 50/60 Hz, (NTSC, NTSC4.43, PAL, PAL60, PAL-N, PAL-M, SECAM)
Vertical: +50% (powered), horizontal: ±10% (powered)
Vertical: +60% (powered), horizontal: ±10% (powered) Vertical: +50% (powered), horizontal: ±10% (powered)
Vertical: ±30°
Ceiling/floor, front/rear
Multi-Screen Support System, Geometric Adjustment
Multi-Screen Support System
DVI-D 24-pin
BNC x 5
D-sub HD 15-pin
BNC
Mini DIN 4-pin
D-sub 9-pin x 1 (RS-232C compliant)
D-sub 9-pin
M3 jack
M3 jack
D-sub 9-pin
RJ-45 for network connection, 10Base-T/100Base-TX, compliant with PJLink™
—
BNC x 1
3.0 m (9´10˝)
Molded plastic
498 mm x 175 mm x 423 mm
Approx. 16.0 kg (35.3 lbs)
0°–45°C (32°–113°F)
20%–80% (no condensation)
Power cord, Wireless/wired remote control unit, Batteries for remote control (x 2), Wire rope
*1 During eco stand-by mode operation, network functions such as standby-on from a LAN network and the serial output terminal will not operate. *2 Brightness: 3,000 lumens (PT-DZ6710/DZ6700/DW6300), 3,250 lumens (PT-D6000).
*3 Measurement, measuring conditions, and method of notation all comply with ISO 21118 international standards. *4 SD-SDI is also supported. *5 Average value. May differ depending on models.
Optional accessories
Lens
Zoom lens ET-DLE150
1.3 – 1.9:1 (PT-DZ6710/DZ6700)
1.4 – 2.0:1 (PT-DW6300)
1.3 – 2.0:1 (PT-D6000)
Zoom lens ET-DLE250
2.3 – 3.6:1 (PT-DZ6710/DZ6700)
2.4 – 3.8:1 (PT-DW6300)
2.4 – 3.7:1 (PT-D6000)
NOTES ON USE
Lamp
1. Do not install the projector in locations that are subject to excessive water, humidity, steam, or oily smoke. Doing so may result in fire, malfunction, or
electric shock.
2. The projector uses a high-voltage mercury lamp that contains high internal pressure. This lamp may break, emitting a large sound, or fail to illuminate,
due to impact or extended use.
3. The projector uses of high-wattage lamp that becomes very hot during operation. Please observe the following precautions.
• Never place objects on top of the projector while it is operation.
• Make sure there is an unobstructed space of 500 mm or more around the projector's exhaust openings.
• Do not stack projector units directly on top of one another for the purpose of multiple (stacked) projection. When stacking projector units, be sure to
provide the amount of space indicated between them. These space requirements also apply to installation where only one projector unit is operating
atone time and the other unit is used as a backup.
• If the projector is placed in a box or enclosure, temperature of the air surrounding the projector must be between 0 ˚C and 40 ˚C. Also make sure the
projector's intake and exhaust openings are not blocked. Take particular care to ensure that hot air from the exhaust openings is not sucked into the
intake openings.
* Even when the ambient temperature near the intake opening is 40 ˚C/104 ˚F or lower, an accumulation of hot air inside the cabinet may cause the
protective circuit to activate and shut down the projector. Please give ample consideration to the design with regard to ambient temperature
conditions.
4. If the projector is to be operated continuously 24 hours a day, use the dual-lamp optical system's alternating lamp operation (lamp changer) function.
The projector cannot be operated continuously 24 hours a day in dual-lamp mode. Allow a minimum of two hours per day of non-operation time per
day if the using the dual-lamp mode.
5. The lamp replacement cycle duration becomes shorter if the projector is operated repeatedly for short periods.
• The length of time that it takes for the lamp to break or fail to illuminate varies greatly depending on individual lamp characteristics and usage conditions.
• The brightness of the lamp will gradually decrease with use.
Replacement lamp unit
ET-LAD60
ET-LAD60W (twin pack)
Filter
Replacement filter unit
ET-ACF100
Zoom lens ET-DLE350
3.6 – 5.4:1 (PT-DZ6710/DZ6700)
3.8 – 5.7:1 (PT-DW6300)
3.7 – 5.6:1 (PT-D6000)
Ceiling mount bracket
Zoom lens ET-DLE450
ET-PKD56H (for high ceilings)
ET-PKD55S (for low ceilings)
5.4 – 8.6:1 (PT-DZ6710/DZ6700)
5.6 – 9.0:1 (PT-DW6300)
5.5 – 8.9:1 (PT-D6000)
Please visit our website for more information.
ET-PKD55S
Fixed focus lens ET-DLE055
0.8:1
ET-PKD56H
http://panasonic.net/avc/projector
panasonic projector global
Search
Please contact Panasonic or your dealer for a demonstration.
JQA-1617
EC98J2010
Weights and dimensions shown are approximate. Specifications are subject to change without notice.
This product may be subject to export regulations.
An application has been filed for trademark rights, or trademark rights have been granted,
for PJLink in Japan, United States of America and other countries and area.
VGA and XGA are trademarks of International Business Machines Corporation.
All other trademarks are the property of their respective trademark owners. Projection Images simulated.
DLP, DLP logo and DLP Medallion logo are trademarks or registered trademarks of Texas Instruments.
(C) 2009 Panasonic Corporation All rights reserved.
All information included here is valid as of February 2009.
PT-D6000series-09February10K Printed in Japan.
Download PDF