WCP Outdoor Call Point Range
WCP4 Double Pole Changeover Contact Model
(Colour Versions)
>Product Benefits
•
Sealed to IP67
•
Unique ‘Plug & Play’ installation concept
•
Total ‘Flex-Ability’ in the choice of operating
element
•
Anti-Tamper facility
•
Enhanced aesthetics and compact design
Product Overview
Installation efficiency, flexibility and full compliance with the latest standards are at the
heart of the new WCP Outdoor Call Point range.
The outdoor WCP is an IP67 sealed manual call point product. The enhanced
environmental protection allows the unit to be installed in many external environments
where water and dirt are likely to be present, making it a true waterproof and outdoor
product.
Installation time and ultimately cost, are of paramount importance to any fire or security
installer. The WCP range directly reflects this need by providing a unique ‘plug and play’
concept designed specifically to reduce installation time. All new WCP products utilise
a special terminal block, where all initial installation cabling is terminated. This terminal
block is then simply connected to the back of the WCP. Simple, but effective with no
re-termination required and no time wasted. In addition, all WCP products are supplied
with three standard 20mm threaded entries, accommodating all types of surface wiring
installations.
Both break glass and re-settable operating elements can now be used within a manual
call point. To provide you with the greatest ‘flex-ability’, the new WCP range can be
configured as either a break glass or re-settable unit by simply changing from one
element to another. No other additional parts or alternative products need to be ordered.
All WCP Outdoor Call Point products also help preserve the integrity of the overall
system as illegal removal of the product lid will result in the call point operating and the
system going in to alarm.
The WCP4A product version is supplied with a double pole changeover set of contacts.
The product utilises two terminal blocks and wiring to the relevant terminals on these
terminal connector blocks provides either a ‘normally open’ or ‘normally closed’ operation
(see wiring diagram overleaf).
WCP4-COL
Rev. No.3
Electrical Specification
Figure .1
Connection Details:
See Figure .1
Cable Termination:
0.5-2.5mm2
Maximium Voltage:
30VDC
Switch Rating:
2 Amps
WCP4A-X
or
Environmental Specification
Humidity:0-93±3% non-condensing
Operating Temperature:
-250C to +700C
Storage Temperature:
-250C to +700C
Ingress Protection (IP) Rating: IP67
For RoHS, WEEE & REACH data please see www.kac.co.uk
Mechanical Specification
71mm
97.5mm
84mm
77mm
93mm
Material:PC/ABS
Weight:
350g
Colours: Green,
White,
Yellow,
Blue.
Ordering Information
Model
Electrical Configuration Colour
Mounting
WCP4A-G000SF-K013-11
N\O & N\C Contacts 30VDC
Green
Surface
WCP4A-G000SF-K013-12
N\O & N\C Contacts 30VDC
Green
Surface
Operating Markings
Element
Flexi
Plain
Flexi
EDR
WCP4A-G000SG-K013-11
WCP4A-G000SG-K013-12
Glass
Glass
N\O & N\C Contacts 30VDC
N\O & N\C Contacts 30VDC
Green
Green
Surface
Surface
N\O= Normally Open Contact
N\C= Normally Closed Contact
Also available with 680W Resistor
WCP variants are available in Blue, Yellow or White if appropriate.
Accessories
CodeDescription
SC070 Pack Of Ten Test Keys
KG1 x 5 Pack Of Five Glass Elements (Also available in packs of 10, 25 & 50)
PS210 Flexible Operating Element
PS200 Plain Hinged Cover
SC071 Pack Of Twenty Terminal Blocks
> KAC Alarm Company Ltd
KAC House, Thornhill Road,
North Moons Moat, Redditch,
B98 9ND, United Kingdom
Tel: +44 (0) 1527 406655
Fax: +44 (0) 1527 406677
e-mail: marketing@kac.co.uk
We reserve the right to amend the content of this document without prior notice.
Plain
EDR
Download PDF

advertising