Fluke Networks Product of the Month

Fluke Networks Product of the Month:
Buy a CableIQ Qualification Tester now!
...and get a 10% discount
Three months of great discounts on Fluke Network products!
CableIQ Qualification Tester
Includes CableIQ with remote
adapter, CableIQ Reporter software
CD, (2) RJ45-RJ45 patch cord, USB
cable, coax ‘F’ push-on adapter,
owners CD and quick start guide,
(4) AA batteries, soft carry case
A cable tester that gives even the most novice
Main features
tech the vision to see what speeds existing
> Know in 4 seconds whether a link, including patch
cabling can support, quickly isolate cabling from
network problems, and discover what is at the far
end of any cable.
cords, is qualified for voice, 10/100BASE-T, VoIP, or
> Provides detailed information on the nature and
location of cabling performance faults such as crosstalk
Do you want to reduce the pressure, close trouble
tickets faster and save money?
or large impedance changes.
> Discover mode shows you exactly what’s at the far end
When troubleshooting your network infrastructure,
of any cable. At the switch, test each cable one at a
you face many questions. Is the port active? Are the
time. You can quickly see whether the cable is open at
duplex settings matched? Is it a network problem or
the far end, or is connected to a PC - unused ports you
an Ethernet cable problem? Can the Ethernet cable
support the required network bandwidth? CableIQ is
the only Ethernet cable tester that can answer all these
questions before trouble tickets are escalated to the
next level reducing problem escalation by up to 30%.
can free up and redeploy.
> Intelligent wiremap test for length, shorts, split pairs, or
opens and displays with an intuitive graphical interface
where a fault is located.
> Document your findings.
> Fluke Networks Quality.
Only during the month of May 2016, you can get 10% discount on the purchase
of a Fluke Networks CableIQ Qualification Tester. Contact your sales channel today.
Your dealer:
Download PDF