Product Specification
Product Specification
i
i
P Series 4 SATA III 6Gb/s 2.5” SSD
READ 565MB/s*
WRITE 530MB/s*
120
GB
INTRODUCTION
The Integral P Series 4 SSD offers exceptional
performance levels and great value. It is ideal for
use in desktops and laptop computers.
The Performance Series SSD has a great combination
of fast data read/write and reliability, along with
low power operation - to make this the ideal hard
disk drive replacement.
Choose the P Series 4 SSD to boost the performance of
your existing hardware and extend its useful life.
It will speed up your daily OS boot times and increase
the speed of your applications, overall giving you the
best experience of Solid State performance computing.
KEY BENEFITS
• Providing an industry-leading bandwidth of more
240
GB
480
GB
960
GB
• No mechanical parts
- Highest reliability; less likely to fail than HDD
- Extreme shock resistance
- Zero noise
- No heat generation
• Low power consumption - improved battery life on
laptops/netbooks
FEATURES
• 2.5 inch form factor with SATA III 6Gbps interface
(backwards compatible with SATA 3Gbps and SATA 1.5Gbps)
• Performance: Faster boot than HDD, Faster access to
applications, enhanced productivity and increased efficiency
• Fully compatible with devices and OS that support the
SATA standard
• Non-volatile Flash Memory for outstanding
retention - Less likely to fail than HDD
data
than 565MB/sec transfers, the Integral P Series 4 SSD can
approach the limits of the SATA III 6Gb/s interface on
large transfers.
• Ultra-efficient Block Management and Wear Leveling
• A robust ECC algorithm corrects up to 120 bits error
• Lower Power Consumption
in 2K Byte data. Efficient bad block management
and reduced write amplification further increases
endurance. Drive health is monitored using an SSDspecific set of S.M.A.R.T. attributes. The combination of
these techniques provides excellent data protection.
• Shock resistance - No moving parts enable the product to
be used in tougher conditions
• Error Correction Code
• Silent operation - Noiseless and low heat dissipation
• Supports S.M.A.R.T. - Self-Monitoring, Analysis and
Reporting Technology
• RoHS compliant
BENEFITS
• CE and FCC tested
• Enhanced performance: faster boot than HDD, faster
access to applications, enhanced productivity and increased
efficiency
• 3 Year Warranty
• Read up to 565MB/s*, Write up to 530MB/s*
Rev:7
Product Specification
i
i
Technical Features
CAPACITIES & INTERFACE
• SATA III 2.5”
Capacities available
120GB, 240GB, 480GB, 960GB
Form Factor
2.5 Inch
• TRIM (OS support required)
NAND
TLC
• S.M.A.R.T. option
Controller
Phison S10
• CE and FCC certified and RoHs compliant
Interface
7mm to 9mm Adapter supplied with packaged product
Sequential Speed (up to)*
SATA III 6Gbps
Also Compatible with SATA II 3Gbps
Also compatible with SATA 1.5Gbps
120GB = READ 560MB/s, WRITE 420MB/s
240GB = READ 565MB/s, WRITE 490MB/s
480GB = READ 565MB/s, WRITE 530MB/s
960GB = READ 560MB/s, WRITE 500MB/s
DIMENSIONS
Bottom View
Length mm
100.00
Width mm
69.85
Height mm
7.0
Weight
50g
E-tail Packaged Weight
64g
E-tail Packaged
Dimensions (mm)
L = 133, W = 117, D = 13
Retail Packaged Weight
86g
Retail Packaged
Dimensions (mm)
L = 136, W = 111, D = 15
POWER CONSUMPTION
Power Management
5V
120GB - Read 2,290, Write 2,730, Idle 175
240GB - Read 2,290, Write 2,730, Idle 175
480GB - Read 2,510, Write 5,260, Idle 185
960GB - Read 2,620, Write 3,655, Idle 195
Power Consumption
(mW)***
ENVIRONMENTAL
Side View
Operating Temp
0° - +70°C
Storage Temp
-40° - +85°C
Humidity****
RH 90% under 40°C (operational)
FEATURES
Supports SMART Software Yes
Supports TRIM
Yes (OS support required)
ECC scheme
Corrects up to 120 bits error in 2K Byte data
MTBF
>2 Million Hours
Compliancy
CE, FCC, RoHS
WARRANTY
3 years
E-tail packaging order codes
CAPACITY
PART CODE
BARCODE (EAN)
120GB
INSSD120GS625M7XP4
5055288428560
240GB
INSSD240GS625M7XP4
5055288428577
480GB
INSSD480GS625M7XP4
5055288429246
960GB
INSSD960GS625M7XP4
5055288429253
Retail packaging order codes
CAPACITY
PART CODE
BARCODE (EAN)
120GB
INSSD120GS625M7XP4R
5055288435667
240GB
INSSD240GS625M7XP4R
5055288435674
480GB
INSSD480GS625M7XP4R
5055288435681
960GB
INSSD960GS625M7XP4R
5055288435698
*Based on internal testing measured under ambient temperature.Sequential R/W is measured using ATTO.
***Power Consumption may differ according to flash configuration, SDR configuration, and platform.
****Humidity test was for 4 hours
E&OE. Product design and specification subject to change or modification without notice.
Rev:7
Product Specification
i
i
REVISION HISTORY WITH SEQUENTIAL READ AND WRITE PERFORMANCE*
16nm MLC
A19nm TLC
15nm TLC
120GB
Before August 2015
Phison S9 + 16nm MLC
Read 545MBs, Write 440MBs”
From August 2015
Phison S10 + A19nm TLC
Read 565MBs, Write 429MBs”
From November 2015
Phison S10 + 15nm TLC
Read 560MBs, Write 420MBs”
240GB
Before August 2015
Phison S8 + 16nm MLC
Read 550MBs, Write 520MBs”
From August 2015
Phison S10 + A19nm TLC
Read 565MBs, Write 500MBs”
From December 2015
Phison S10 + 15nm TLC
Read 565MBs, Write 490MBs”
480GB
Before August 2015
Phison S8 + 16nm MLC
Read 550MBs, Write 500MBs”
From August 2015
Phison S10 + A19nm TLC
Read 565MBs, Write 530MBs”
From February 2016
Phison S10 + 15nm TLC
Read 565MBs, Write 530MBs”
960GB
Before September 2015
Phison S8 + 16nm MLC
Read 550MBs, Write 490MBs”
From September 2015
Phison S10 + A19nm TLC
Read 565MBs, Write 530MBs”
From January 2016
Phison S10 + 15nm TLC
Read 560MBs, Write 500MBs”
Rev:7
Was this manual useful for you? yes no
Thank you for your participation!

* Your assessment is very important for improving the work of artificial intelligence, which forms the content of this project

Download PDF

advertising