IGS-9848GPF(X) Series

Add to my manuals
6 Pages

advertisement

IGS-9848GPF(X) Series | Manualzz

Industrial Ethernet Switch DIN-Rail Managed Gigabit Ethernet Switch

IGS-9848GPF(X) Series

Features

Industrial 20-port managed Gigabit Ethernet switch with

8x10/100/1000Base-T(X) ports and 4x100/1000Base-X SFP socket and 8x 100Base-FX or 8x1000Base-X fiber ports

▪ Supports O-Ring (recovery time < 30ms over 250 units of connection) and

MSTP(RSTP/STP compatible) for Ethernet Redundancy

Open-Ring support the other vendor’s ring technology in open architecture

O-Chain allow multiple redundant network rings

▪ Support standard IEC 62439-2 MRP (Media Redundancy Protocol) function

▪ Support IEEE 1588v2 clock Synchronization

▪ Supports IPV6 new internet protocol version

▪ Support Modbus TCP protocol

▪ Provided HTTPS/SSH protocol to enhance network security

▪ Support IEEE 802.3az Energy-Efficient Ethernet technology

▪ Supports SMTP client

▪ Supports IP-based bandwidth management

▪ Supports application-based QoS management

▪ Supports Device Binding security function

▪ Supports DOS/DDOS auto preven°tion°

▪ IGMP v2/v3 (IGMP snooping support) for filtering multicast traffic

▪ Supports SNMP v1/v2c/v3 & RMON & 802.1Q VLAN Network Management

▪ Support ACL, TACACS+ and 802.1x User Authentication for security

▪ Supports 9.6K Bytes Jumbo Frame

▪ Multiple notification for warning of unexpected event

▪ Web-based ,Telnet, Console (CLI), and Windows utility (Open-Vision) configuration

▪ Support LLDP Protocol

▪ Rigid IP-30 housing design

▪ DIN-Rail and wall mounting enabled v1.0 Jan, 2013

Introduction

IGS-9848GPF(X) series are managed redundant ring Ethernet switch with 8x10/100/1000Base-T(X) ports and 4x100/1000Base-X SFP ports and

8x100Base-FX (IGS-9848GPFX series) or 8x1000Base-X (IGS-9848GPF series) optical fiber port with SC connector. With completely support of Ethernet

Redundancy protocol, O-Ring (recovery time < 30ms over 250 units of connection) and MSTP (RSTP/STP compatible) can protect your mission-critical applications from network interruptions or temporary malfunctions with its fast recovery technology. And support wide operating temperature from -40 to 70°C. IGS-9848GPF(X) series can also be managed centralized and convenient by Open-Vision, Except the Web-based interface, Telnet and console (CLI) configuration. Therefore, the switch is one of the most reliable choice for highly-managed and Fiber Ethernet application.

O-Ring : O-Ring is ORing’s proprietary redundant ring technology, with recovery time of less 30 milliseconds and up to 250 nodes. The O-Ring r

edundant ring technology can protect mission-critical application from network interruptions or temporary malfunction with its fast recover

technology.

Designed for Rugged Excellence

1

Industrial Ethernet Switch DIN-Rail Managed Gigabit Ethernet Switch v1.0 Jan, 2013

Open-Ring : Open-Ring is an enhanced redundant technology that makes ORing’s switches compatible with other vendor’s proprietary redundant

ring technologies. It enables ORing’s switches to form a single ring with other vendor’s switch. In cases where the ring is setup using proprietary

technology, ORing offers a compatibility service where ORing can make its switches compatible with your particular network requirements.

O-Chain : O-Chain is the revolutionary network redundancy technology that provides the add-on network redundancy topology for any backbone

network, O-Chain allows multiple redundant network rings of different redundancy protocols to join and function together as a larger and more robust

compound network topology. O-Chain providing ease-of-use while maximizing fault-recovery swiftness, flexibility, compatibility, and cost-

effectiveness in one set of network redundancy topology.

MRP : Media Redundancy Protocol (MRP) is a data network protocol standardized by the IEC 62439-2. It allows rings of Ethernet switches to overcome

any single failure with recovery time much faster than achievable with Spanning Tree Protocol.

IP-based Bandwidth Management : The switch provide advanced IP-based bandwidth management which can limit the maximum bandwidth

for each IP device. User can configure IP camera and NVR with more bandwidth and limit other device bandwidth.

Application-Based QoS : The switch also support application-based QoS. Application-based QoS can set highest priority for data stream according

to TCP/UDP port number.

Device Binding Function : ORing special Device Binding function can only permit allowed IP address with MAC address to access the network.

Hacker cannot access the IP surveillance network without permission. It can avoid hacker from stealing video privacy data and attacking IP camera,

NVR and controllers.

Advanced DOS/DDOS Auto Prevention : The switch also provided advanced DOS/DDOS auto prevention. If there is any IP flow become big in

short time, the switch will lock the source IP address for certain time to prevent the attack. It’s hardware based prevention so it can prevent DOS/DDOS

attack immediately and completely.

IEEE 1588v2 Technology : The IEEE 1588v2 technology can fulfill precision time synchronization requirements for protection and control

applications.

Modbus TCP : This is a Modbus variant used for communications over TCP/IP networks.

IEEE 802.3az Energy-Efficient Ethernet : This is a set of enhancements to the twisted-pair and backplane Ethernet family of networking

standards that will allow for less power consumption during periods of low data activity. The intention was to reduce power consumption by 50% or

more.

Optic Fiber CAT5e Serial

IP Camera IP Camera IP Camera

Control Cnter

RGS-P9000

IGS-9848GPF

IP Camera

1-72 www.oring-networking.com

PLC

Product Line

IGS-9848GPF PLC

Product Line

IAP-120 IDS-5011-WG Product Line

Industrial Ethernet Switch DIN-Rail Managed Gigabit Ethernet Switch

Dimensions

v1.0 Jan, 2013

(Unit=mm)

Open-Vision

ORing’s switches are intelligent switches. Different from other traditional redundant switches, ORing provides a set of Windows utility (Open-Vision) for user to manage and monitor all of industrial Ethernet switches on the industrial network.

Commander Host Monitor

Topology View

Designed for Rugged Excellence

Industrial Ethernet Switch DIN-Rail Managed Gigabit Ethernet Switch v1.0 Jan, 2013

1

Specifications

ORing Switch Model

Physical Ports

10/100/1000Base-T(X) Ports in RJ45 Auto MDI/MDIX

100/1000Base-X with SFP port

Fiber Ports Number

Fiber Ports Standard

Fiber Mode

Fiber Diameter (µm)

Fiber Ports Specifications

Fiber Optical Connector

Typical Distance (km)

Wavelength (nm)

Max. Output Optical

Power (dBm)

Min. Output Optical

Power (dBm)

Max. Input Optical Power

(Saturation)

Min. Input Optical Power

(Sensitivity)

Link Budget (dB)

Technology

Ethernet Standards

MAC Table

Priority Queues

Processing

Switch Properties

Jumbo frame

Security Features

IGS-9848GPF-MM

8

4

8

1000Base-SX

Multi-mode

62.5/125 µm

50/125 µm

SC

0.55 km

850 nm

-4 dBm

-9.5 dBm

0 dBm

-18 dBm

8.5 dB

IGS-9848GPFX-MM

IEEE 802.3 for 10Base-T

IEEE 802.3u for 100Base-TX and 100Base-FX

IEEE 802.3ab for 1000Base-T

IEEE 802.z for 1000Base-X

IEEE 802.3x for Flow control

IEEE 802.3ad for LACP (Link Aggregation Control Protocol )

IEEE 802.1p for COS (Class of Service)

IEEE 802.1Q for VLAN Tagging

IEEE 802.1w for RSTP (Rapid Spanning Tree Protocol)

IEEE 802.1s for MSTP (Multiple Spanning Tree Protocol)

IEEE 802.1x for Authentication

IEEE 802.1AB for LLDP (Link Layer Discovery Protocol)

8K

8

Store-and-Forward

Switching latency: 7 us

Switching bandwidth: 40Gbps

Max. Number of Available VLANs: 256

IGMP multicast groups: 128 for each VLAN

Port rate limiting: User Define

Https / SSH enhance network security

Up to 9.6K Bytes

Device Binding security feature

Enable/disable ports, MAC based port security

Port based network access control (802.1x)

VLAN (802.1Q ) to segregate and secure network traffic

Radius centralized password management

SNMPv3 encrypted authentication and access security

Https / SSH enhance network security

8

4

8

100Base-FX

Multi-mode

62.5/125 µm

50/125 µm

SC

2 km

1310 nm

-14 dBm

-23.5 dBm

0 dBm

-31 dBm

7.5 dB

IGS-9848GPF-SS

8

4

8

1000Base-LX

Single-mode

9/125 µm

SC

10 km

1310 nm

-3 dBm

-9.5 dBm

-3 dBm

-20 dBm

10.5 dB

IGS-9848GPFX-SS

8

4

8

100Base-FX

Single-mode

9/125 µm

SC

30 km

1310 nm

-8 dBm

-15 dBm

0 dBm

-34 dBm

19 dB

1-74 www.oring-networking.com

Software Features

Network Redundancy

RS-232 Serial Console Port

LED Indicators

Power Indicator(PWR)

Ring Master Indicator (R.M.)

O-Ring Indicator (Ring)

Fault Indicator(Fault)

10/100/1000Base-T(X) RJ45 Port Indicato

100/1000Base-X SFP Port Indicator

100Base-FX or 1000Base-X Fiber Port Indicator

Fault Contact

Relay

Power

Redundant Input Power

Power Consumption (Typ.)

Overload Current Protection

Reverse Polarity Protection

Physical Characteristics

Enclosure

Dimensions (W x D x H)

Weight (g)

Environmental

Storage Temperature

Operating Temperature

Operating Humidity

Regulatory Approvals

EMI

EMS

Shock

Free Fall

Vibration

Safety

Warranty

STP/RSTP/MSTP (IEEE 802.1D/w/s)

Redundant Ring (O-Ring) with recovery time less than 30ms over 250 units

TOS/Diffserv supported

Quality of Service (802.1p) for real-time traffic

VLAN (802.1Q) with VLAN tagging

IGMP Snooping

IP-based bandwidth management

Application-based QoS management

DOS/DDOS auto prevention

Port configuration, status, statistics, monitoring, security

DHCP Server/Client/Relay

SMTP Client

Modbus TCP

O-Ring

Open-Ring

O-Chain

MRP

MSTP (RSTP/STP compatible)

RS-232 in RJ45 connector with console cable. 115200bps, 8, N, 1

Green : Power LED x 2

Green : Indicates that the system is operating in O-Ring Master mode

Green : Indicates that the system operating in O-Ring mode

Green Blinking : Indicates that the Ring is broken.

Amber : Indicate unexpected event occurred

Up Green LED for Link/Act indicator.

Down dual color LED : Green for 1000Mbps indicator, Amber for 10/100Mbps indicator

Green for port Link/Act.

Green for port Link/Act.

Relay output to carry capacity of 1A at 24VDC

Dual DC inputs. 12~48 VDC on 6-pin terminal block

15 Watts

Present

Present

IP-30

96.4 (W) x 105.5 (D) x 154 (H) mm (3.8 x 4.15 x 6.06 inch)

1250 g

-40 to 85°C (-40 to 185°F)

-40 to 70°C (-40 to 158°F)

5% to 95% Non-condensing

FCC Part 15, CISPR (EN55022) class A

EN61000-4-2 (ESD), EN61000-4-3 (RS), EN61000-4-4 (EFT), EN61000-4-5 (Surge), EN61000-4-6 (CS), EN61000-4-8,

EN61000-4-11

IEC60068-2-27

IEC60068-2-32

IEC60068-2-6

EN60950-1

5years

Designed for Rugged Excellence

v1.0 Jan, 2013

Industrial Ethernet Switch DIN-Rail Managed Gigabit Ethernet Switch

Ordering Information

IGS-9 A B C DDEE-FF-GG

1

Code

Definition

10/100/1000Base-

T(X) Port Number

Additional Port 1

Number

Additional Port 2

Number

Option - 8: 8 ports - 4: 4 ports - 8: 8 ports

Additional Port 1

Type

Additional Port 2

Type

Fiber Optical Mode

Fiber Optical

Connector

- GP:

100/1000Base-X SFP port

-F: 1000Base-X fiber port

-FX: 100Base-FX fiber port

-MM: Multi-mode

-SS: Single-mode

-SC: SC connector

Model Name

IGS-9848GPFX-MM-SC

IGS-9848GPFX-SS-SC Available

Model

IGS-9848GPF-MM-SC

IGS-9848GPF-SS-SC

Packing List

‧ IGS-9848GPF(X)

‧ DIN-Rail Kit

‧ Wall-mount Kit

‧ Console Cable

‧ ORing Tool CD

‧ Quick Installation Guide

Description

Industrial 16-port managed Gigabit Ethernet switch with 8x10/100/1000Base-T(X) ports and 4x100/1000Base-X SFP socket and 8x100Base-FX, multi-mode,2km/1310nm, SC connector

Industrial 16-port managed Gigabit Ethernet switch with 8x10/100/1000Base-T(X) ports and 4x100/1000Base-X SFP socket and 8x100Base-FX, single-mode, 30Km/1310nm, SC connector

Industrial 16-port managed Gigabit Ethernet switch with 8x10/100/1000Base-T(X) ports and 4x100/1000Base-X SFP socket and 8x1000Base-SX, multi-mode, 550m/850nm, SC connector

Industrial 16-port managed Gigabit Ethernet switch with 8x10/100/1000Base-T(X) ports and 4x100/1000Base-X SFP socket and 8x1000Base-LX, single-mode, 10Km/1310nm, SC connector

Optional Accessories (Can be purchased separately)

‧ Open-Vision M500, Powerful Network Management Windows Utility Suite, 500 IP devices

‧ SFP100 series, 100Mbps SFP optical transceiver

‧ SFP1G series, 1Gbps SFP optical transceiver

‧ DR-45 series, 45W DIN-Rail power supply

‧ DR-75 series, 75W DIN-Rail power supply

‧ DR-120 series, 120W DIN-Rail power supply

1-76 www.oring-networking.com

advertisement

Was this manual useful for you? Yes No
Thank you for your participation!

* Your assessment is very important for improving the workof artificial intelligence, which forms the content of this project

Related manuals

Download PDF

advertisement