User manual | TGSSD_L5LITE_DB1_EN

Team 2.5” Solid State Disk
L5 LITE
http://www.teamgroupinc.com
All rights are strictly reserved.Any portion of this paper shall not be reproduced, copied,
or translated to any other forms without permission from TEAMGROUP.
Table of Contents
1. Introduction .............................................................................................................. 1
TE
AM
G
RO
U
P
IN
C.
2. Main Features .......................................................................................................... 2
3. Product Specification ............................................................................................... 2
4. Controller Block Diagram ....................................................................................... 3
5. Electrical Specifications .......................................................................................... 3
6. Supported Command Sets....................................................................................... 5
7. Mechanical Dimension ............................................................................................ 7
8. Product Ordering Number ..................................................................................... 8
Revision History
Revision
Author
New Creation
2017/02/14
Leo Yang
TE
AM
G
RO
U
P
IN
C.
1.0
Date
History
1. Introduction
C.
 4 times faster
When your old computer is running slow, do you feel that it is dragging down your efficiency? With great
performance and ultra-fast read and write speed, L5 LITE solid state drive is 4 times faster than the
traditional hard drive. It can not only speed up boot time, shutdown time and the response time of
applications, but also lightweight and easy to carry. It is absolutely the best product to replace traditional
hard drive.
IN
 Various capacities to choose from, and the performance is greatly enhanced
L5 LITE solid state drive is using SATA III 6Gbps specification and there are 60GB, 120GB, 240GB,

Solid, durable and total protection
U
P
480GB, 4 capacities available to choose from. The sequential read/write speed is up to 500 and 400 MB/s.
It not only greatly improves the performance of the computer, but also the best bargain for upgrading
your desktop computer or laptop.
L5 LITE solid state drive is using flash memory chip, which is durable, shockproof, fall resistance and offers total
G
RO
protection. Even if you accidentally drop your laptop or it landed on a hard surface, it can still prevent damages and
data corruption from accidents.
AM
 Perfect and effective operation for prolonging the service life
L5 LITE solid state drive supports the Windows TRIM optimization command which is able to release
unused space (Free Blocks) to be used for system writes immediately. This can speed up the transfer and
write performance of the SSD, and also effectively reduces performance degradation and depletion
chances. It perfectly maintains the effective operation and prolongs the service life of the SSD.
TE
 Trustworthy and reliable
L5 LITE solid state drive’s built-in smart algorithm management mechanism has functions such as
garbage collection, which is able to ensure operation efficiency and prolong the service life of the SSD.
Meanwhile, the powerful Wear-Leveling technology and ECC (Error Correction Code) function can
enhance the reliability of data transfer.
1
2. Main Features
4x faster than a HDD：Injects vitality into the system.

High performance：Read speeds up to 500 MB/s to boost overall system responsiveness and




performance.
Slim form factor：2.5-inch drive available in 7mm to fit in more systems (even slimmer notebooks
Supports S.M.A.R.T.：Monitors the status of your drive
Supports TRIM：Maintains maximum performance of compatible operating systems
Guaranteed：3-year warranty and free technical support
C.

IN
3. Product Specification
Item
Specification
L5 LITE
Interface
SATA Rev. 3.0 (6Gb/s) – with backwards compatibility to SATA Rev. 2.0
Capacity
60 / 120 / 240 / 480GB*
Voltage
DC 5V
Operation Temperature
0°C ~ 70°C
U
P
Model
480GB Read: Up to 530MB/s Max ; Write: 420MB/s **
IOPS:
600GB 4K Random Read/Write: 30K/25K IOPS max**
120GB 4K Random Read/Write: 30K/40K IOPS max**
240GB 4K Random Read/Write: 65K/70K IOPS max**
480GB 4K Random Read/Write: 70K/70K IOPS max**
AM
Performance
G
RO
ATTO / Crystal Disk Mark:
60GB Read: Up to 500MB/s Max ; Write: 100MB/s **
120GB Read: Up to 500MB/s Max ; Write: 300MB/s **
240GB Read: Up to 530MB/s Max ; Write: 400MB/s **
100 x 69.9 x 7 mm
Humidity
0°C to 55°C / 5% ~ 95% RH,non-condensing
Vibration
20G (non-operating)
TE
Dimensions
Shock
1500G
MTBF
1,000,000 hours
System Requirements
Windows 10 / 8 / 7 / Vista, MAC OS 10.4 or later, Linux 2.6.33 or later ***
Warranty
3-year limited warranty
Notes:
*1GB=1,000,000,000 Bytes. In OS system, it would be displayed as 1,000,000,000 Bytes / 1024 / 1024 / 1024 = 0.93GB
**Transmission speed will vary according to different hardware / software conditions, therefore the data can only used for basic reference.
***Desktop or notebook computer with a SATA III interface
※We reserve the right to modify product specifications without prior notice.
2
G
RO
U
P
IN
C.
4. Controller Block Diagram
5. Electrical Specifications
TE
AM
5.1 Pin Assignment and Descriptions：
Pin Number
Function
S1
GND
S2
A+(Differential Signal Pair A)
S3
A-(Differential Signal Pair A)
S4
GND
S5
B-(Differential Signal Pair A)
S6
B+(Differential Signal Pair A)
S7
GND
3
Pin Number
3.3V
P2
3.3V
P3
DEVSLP
P4
GND
P5
GND
P6
GND
P7
5V pre-charge
P8
5V
P9
5V
P10
GND
P11
Reserved
P12
GND
P13
Not Used (12V pre-charge)
P14
Not Used (12V)
P15
Not Used (12V)
U
P
IN
C.
P1
G
RO
5.2 Supply Voltage：
Function
Item
Requirements
Allowable voltage
5.0V +/- 5%
Allowable noise / ripple
100mV p-p or less
5.3 Power Consumption：
Idle
Sleep
Read
Write
Unit
60GB
0.27
0.27
1.22
2.03
W
120GB
0.28
0.28
1.28
3.18
W
240GB
0.3
0.3
1.44
3.20
W
480GB
0.3
0.3
1.42
3.42
W
TE
AM
Capacity
4
6. Supported Command Sets
6.1 ATA Feature Command Sets：
The SSD supports all the mandatory ATA commands defined in ATA/ATAPI‐7 specification.
The supported command sets are listed as below:
Feature Set
Advanced Power Management(APM) Feature Set
Device Configuration Overlay(DCO)
General Feature Set
General Purpose Logging(GPL) Feature Set
Host Protected Area(HPA) Feature Set
IN
Extended Power Conditions (EPC)
U
P
Long Logical Sector (LLS) Feature Set non‐512
Native Command Queuing(NCQ) Feature Set
Power Management Feature Set
Power‐up In Standby(PUIS) Feature Set
G
RO
Sanitize Device Feature Set
Security Feature Set
S.M.A.R.T Feature Set
Software Setting Preservation(SSP) Feature Set
Trusted Computing Feature Set
TE
AM
Write‐Read‐Verify Feature Set
5
C.
48‐bit Address Feature Set
C.
IN
U
P
G
RO
AM
TE
6.2 Identify Device：
The SSD responds to ATA IDENTIFY DEVICE command with a pre-defined string of Information on
features, hardware and firmware revision information, and functionality support indicators. Many
portions of the IDENTIFY DEVICE response string are configurable at manufacturing time via the
Config Drive Unique SCT diagnostic command.
6
TE
AM
G
RO
U
P
IN
C.
7. Mechanical Dimension
7
8. Product Ordering Number

The ordering number rule is as below:
T
25
3
5T
XXXX
0
C
TEAM
SATAIII
7+15PIN
L5 LITE
IN
C.
2.5" STD
Model Name
G
RO
U
P
60G: 60GB
120G: 120GB
240G: 240GB
480G: 480GB
Capacity
NA
C: 0°C - 70°C
Description
60GB
TEAM 2.5" STD SATA3 L5 LITE 7mm 60GB RETAIL
T2535T120G0C10
120GB
TEAM 2.5" STD SATA3 L5 LITE 7mm 120GB RETAIL
T2535T240G0C10
240GB
TEAM 2.5" STD SATA3 L5 LITE 7mm 240GB RETAIL
T2535T480G0C10
480GB
TEAM 2.5" STD SATA3 L5 LITE 7mm 480GB RETAIL
TE
AM
T2535T060G0C101
8

* Your assessment is very important for improving the work of artificial intelligence, which forms the content of this project