Operating instructions
Refrigerator with explosion-proof interior container
Read the operating instructions before switching on for the first time
Page 6
7084 325-00
Disposal notes
The appliance contains reusable materials and should
be disposed of properly - not simply with unsorted
household refuse. Appliances which are no longer
needed must be disposed of in a professional and
appropriate way, in accordance with the current local
regulations and laws.
When disposing of the appliance, ensure that the refrigerant circuit
is not damaged to prevent uncontrolled escape of the refrigerant
it contains (data on type plate) and oil.
• Disable the appliance.
• Pull out the mains plug.
• Cut through the connection cable.
Danger of suffocation due to packing material and plastic film!
Do not allow children to play with packaging material. Take the
packaging material to an official collection point.
Range of appliance use
The interior, which is free from sources of ignition,
is used for storing flammable substances in closed
containers and is therefore classified as a Zone 2
hazardous area.
The appliance is not suitable for storing and cooling medicines,
blood plasma, laboratory preparations or similar substances and
products covered by the 2007/47/EC Medical Devices Directive.
Any misuse of the appliance may result in damage to or spoilage
of stored goods.
Furthermore, the appliance is not suitable for operation in potentially explosive atmospheres.
Climate rating
The climate rating indicates the room
temperature at which the appliance may
be operated in order to achieve full refrigeration performance.
The climate rating is indicated on the
type plate.
The position of the type plate is shown in the section entitled
Description of the appliance.
Climate rating
4 (SN)
4 (N)
4+ (ST)
4+ (SN-ST)
5 (T)
5 (SN-T)
Room temperature
+10°C to +32°C
+16°C to +32°C
+16°C to +38°C
+10°C to +38°C
+16°C to +43°C
+10°C to +43°C
Noise emissions from the appliance
The noise level while the appliance is operating is below 70 dB(A)
(relative noise level 1 pW).
Do not operate the appliance outside the
specified room temperature range.
Description of the appliance
Temperature control
Type plate
Adjustable shelves
The maximum load per shelf is
40 kg
A container can be placed under
the drain opening in the defrost
water collection tray.
Adjustable-height feet
Danger of sparks produced by friction
due to dust on the fan blades.
Do not store dusty objects in the
Clean the ventilation slots on the recirculated air fan every month using
a vacuum cleaner.
Safety instructions and warnings
•To prevent injury or damage to the unit, the appliance should be unpacked and set up by two
•In the event that the appliance is damaged on
delivery, contact the supplier immediately before
connecting to the mains.
•To guarantee safe operation, ensure that the appliance is set up and connected as described in
these operating instructions.
•Disconnect the appliance from the mains if any
fault occurs. Pull out the plug, switch off or remove
the fuse.
•When disconnecting the appliance, pull on the
plug, not on the cable.
•Any repairs and work on the appliance should
only be carried out by the customer service
department, as unauthorised work could prove
highly dangerous for the user. The same applies
to changing the mains power cable.
•Do not allow naked flames or ignition sources
to enter the appliance. When transporting and
cleaning the appliance, ensure that the refrigerant
circuit is not damaged. In the event of damage,
make sure that there are no ignition sources
nearby and keep the room well ventilated.
•Do not stand on the plinth, drawers or doors or
use them to support anything else.
•This appliance can be used by children of 8 years
old and over, and also by persons with restricted
physical, sensory or mental capacity or lack of
experience and knowledge, if they are supervised
or have been instructed on safe use of the appliance and understand the resulting risks. Children
must not be allowed to play with the appliance.
Cleaning and user maintenance must not be
carried out by children without supervision.
•Avoid prolonged skin contact with cold surfaces or
chilled/frozen food.This could cause pain, numbness and frostbite. In the case of prolonged skin
contact, protective measures should be taken,
e.g. gloves should be worn.
• Do not use electrical appliances inside the appliance.
•The appliance is designed for use in enclosed
areas. Do not operate the appliance outdoors or
in areas where it is exposed to splash water or
damp conditions.
•The appliance is not suitable for storing drugs
pursuant to DIN 58345.
•The appliance is not suitable for storing blood
bottles pursuant to DIN 58371.
Setting up
• Do not place the appliance in direct sunlight
or near cookers, radiators and similar sources
of heat.
• The floor on which the appliance stands
should be horizontal and level. Compensate
for uneven floors with the adjustable feet.
• Do
not cover ventilation openings
or grille.
• Standard EN 378 specifies that the room in which you install
your appliance must have a volume of 1 m3 per 8 g of R 600a
refrigerant used in the appliance, so as to avoid the formation of
inflammable gas/air mixtures in the room where the appliance is
located in the event of a leak in the refrigerant circuit.The quantity
of refrigerant used in your appliance is indicated on the type plate
on the inside of the appliance.
• Always install the appliance directly against the wall.
Electrical connection
Only operate the appliance with alternating current (AC).
The permissible voltage and frequency are indicated on the type
plate. The position of the type plate is shown in the section entitled
Description of the appliance.
The socket must be properly earthed and protected by a fuse.
The tripping current of the fuse must be between 10 A and 16 A.
The socket must not be situated behind the appliance and must be easily accessible.
Do not connect the appliance using an extension cable or extension socket.
Do not use stand-alone inverters (conversion
of direct current to alternating current/threephase current) or energy-saving plugs. Risk
of damage to the electronic control system!
•If you have a lockable appliance, do not keep the
key near the appliance or within reach of children.
Appliance dimensions (mm)
Safety lock
The lock in the appliance door is equipped with a safety mechanism.
Locking the appliance
• Insert the key as shown by
arrow 1.
• Turn the key 90°.
To unlock the appliance, the
same procedure must be repeated in the same order.
Switching the appliance on and off
You are recommended to clean the interior of the appliance before
switching it on for the first time (see Cleaning).
Switching the appliance on
Connect the appliance to the mains - the appliance is switched on.
Switching the appliance off
Pull out the mains plug or turn
the temperature control anticlockwise over the 0 setting until
it snaps into place.
When the temperature control is turned to the "Off" setting,
the refrigeration system is switched off, but the appliance
is not completely disconnected from the mains. Before
cleaning, always disconnect the appliance from the mains.
Remove the plug.
The refrigerator compartment defrosts automatically.
defrost water
drains into a tray situated below the evaporator. This tray must
be emptied from time
to time.
Pull the tray out towards you and empty.
avoid having to
empty the defrost water collection tray frequently, you can
place a container under the drain opening in the tray.
Clean the appliance at least twice per year.
Setting the temperature
Before cleaning always switch off the appliance.
Pull out the mains plug or switch off or unscrew
the fuse.
Setting 0 = warmest setting
• Clean the inside, equipment and outer walls with lukewarm water
and a little detergent. Do not use abrasive or acid cleaners or
chemical solvents.
Set the temperature inside the appliance using the temperature
Setting max. = coldest setting
Set the control between "0" and
"max." as required.
Temperature display
The temperature display is powered by a battery which is available from your specialist dealer.
Changing the battery
• Open the battery compartment using a small screwdriver.
• Replace the battery.
• Close the battery compartment.
If Er or HH appears in the
display, the thermometer has
a fault. Consult the customer
serv­ice department indicating
the fault number displayed.
• Ensure that no cleaning water penetrates into the elec­trical
components or ventilation grille.
• The dust should be removed from the refrigeration unit and heat
exchanger - metal grid at the back of the appliance - once a year.
• Do not damage or remove the type plate on the inside of the
appliance. It is very important for servicing purposes.
Only clean plastic parts with a damp cloth!
Risk of electrostatic discharge.
Do not use steam cleaners because of the
risk of injury and damage.
If a malfunction occurs during operation, check whether it is due
to an operating error.
Changing over door hinges
You may be able to rectify the following faults yourself:
• Appliance does not function:
–Is the appliance switched on?
–Is the plug correctly fitted in the mains socket?
–Is the fuse intact?
• Loud running noise:
–Is the appliance set up firmly on the floor?
–Does the appliance cause nearby items of furniture or objects to
vibrate? Please note that noises caused by the refrigerant circuit
cannot be avoided.
• The temperature is not low enough:
–Is the temperature setting correct (see "Setting the temperature")?
– Does the separately installed thermometer show the correct
– Is the ventilation system working properly?
– Is the appliance set up too close to a heat source?
If none of the above causes
apply and you cannot rectify
the fault yourself, contact the
nearest customer service
department stating the type
designation 1, service number 2 and appliance number  3 as indicated on the
type plate.
1. Unscrew the hinge bracket.
2. Pull the door out at the bottom
and lift off.
3. Transfer handle and plugs
to the opposite side of the
4.Transfer pin on hinge bracket to the
opposite side.
The position of the type plate is shown in the section entitled
Description of the appliance.
Shutting your appliance down
If your appliance is to be shut down for any length of time, switch
it off and disconnect the plug or switch off or unscrew the fuse.
Clean the appliance and leave the door open in order to prevent
unpleasant smells.
5. Move the pin at the top to the other
The appliance complies with the relevant safety regulations and
EC Directives 2004/108/EC, 2006/95/EC and ATEX 94/9/EC
(EN/IEC 60079-15, IEC 60079-0, EN 1127-1).
6. Transfer cover plate to the opposite
7. Mount door on hinge pin and close.
8. Insert hinge bracket in lower door
mounting and screw into place.