40 Full HD Digital LED TV

ELEFT406
40 Full HD Digital LED TV
Instruction Manual
Read all of the instructions before using this TV and keep the
manual in a safe place for future reference.
Important Safety Instructions
’Read these instructions – All the safety and operating instructions should be read before this product
is operated.
’Keep these instructions – The safety and operating instructions should be retained for future reference.
’Heed all warnings – All warnings on the appliance and in the operating instructions should be adhered to.
’Follow all instructions – All operating and use instructions should be followed.
’Do not use this apparatus near water – The appliance should not be used near water or moisture –for
example, in a wet basement or near a swimming pool, and the like.
’Clean only with dry cloth.
’Do not block any ventilation openings. Install in accordance with the manufacture’s instructions.
’Do not install near any heat sources such as radiators, heat registers, stoves, or other apparatus (including
amplifiers) that produce heat.
’Do not defeat the safety purpose of the polarized or grounding plug. A polarized plug has two blades with
one wider than the other. A grounding plug has two blades and a third grounding prong. The wide blade or
the third prong is provided for your safety. If the provided plug does not fit into your outlet, consult an
electrician for replacement of the obsolete outlet.
’Protect the power cord from being walked on or pinched particularly at the plugs, convenience receptacles,
and at the point where they exit from the apparatus.
’Only use attachments/accessories specified by the manufacturer.
’Use only with the cart, stand, tripod, bracket, or table specified by the manufacturer,
or sold with the apparatus. When a cart or rack is used, use caution when moving the
cart/apparatus combination to avoid injury from tip-over.
’Unplug the apparatus during lightning storms or when unused for long periods of time.
’Refer all servicing to qualified personnel. Servicing is required when the apparatus has been damaged in any
way, such as power supply cord or plug is damaged, liquid has been spilled or objects have fallen into the
apparatus has been exposed to rain or moisture, does not operate normally, or has been dropped.
’Please keep the unit in a well-ventilated environment.
’WARNING˖To reduce the risk of fire or electric shock, do not expose this apparatus to rain or moisture. The
apparatus shall not be exposed to dripping or splashing and that objects filled with liquids, such as vases,
shall not be placed on apparatus.
’WARNING: The wall socket plug is used as disconnect device, the disconnect device shall remain readily
operable.
’WARNING: The batteries shall not be exposed to excessive heat such as sunshine, fire or the like.
’
- This lightning flash with arrowhead symbol within an equilateral triangle is intended to alert the user to the
presence of non-insulated “dangerous voltage” within the product’s enclosure that may be of sufficient
magnitude to constitute a risk of electric shock.
- Warning: To reduce the risk of electric shock, do not remove cover (or back) as there are no user -serviceable
parts inside. Refer servicing to qualified personnel.
- The exclamation point within an equilateral triangle is intended to alert the user to the presence of important
operating and maintenance instructions in the literature accompanying the appliance.
’The apparatus should be connected to an electrical wall outlet with a protective grounding connection.
Contents
Caution. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 3
Safety Information . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 4
What’s Included . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 5
Getting Started . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 6-7
Front / Rear View. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 6-7
Wall Mounting. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 7
Connecting to External Devices . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 8
Remote Control Key Functions . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 9-10
Operating Your Television . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 11-19
Select Your Onscreen Language Preference . . . . . . . . . . . . . . . . . . . . . . . . . . . . 11
Navigating the Onscreen Display. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 12
Choosing a TV Channel . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 12
Selecting Input Source . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 13
Picture Menu Options . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 13
Audio Menu Options . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 14
Time Menu Options
. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 14
Setup Menu Options . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 15
Lock Menu Options
. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .16-17
Channel Menu Options . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 18-19
USB Menu Options . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 20
Roku Menu Options. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 21
Troubleshooting . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 22-24
FCC . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 25
Specifications . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 25
2
Caution
The exclamation point within an equilateral triangle is intended to alert the user to
the presence of important operating and maintenance (servicing) instructions in
the literature accompanying the appliance.
The lightning flash with arrowhead symbol, within an equilateral triangle is
intended to alert the user to the presence of uninsulated “dangerous voltage”
within the products enclosure that may be of sufficient magnitude to constitute a
risk of electric shock to the persons.
3
Safety Information
To ensure reliable and safe operation of this equipment, please read carefully all the instructions
in this user guide, especially the safety information below.
Electrical safety
’
’
’
’
’
’
’
’
’
’
’
The TV set should only be connected to a main power supply with voltage that matches the
label at the rear of the product.
To prevent overload, do not share the same power supply socket with too many other
electronic components.
Do not place any connecting wires where they may be stepped on or tripped over.
Do not place heavy items on them, which may damage the leads.
Hold the main plug, not the wires, when removing from a socket.
During a thunderstorm or when not in using the television for long periods, turn off the
power switch on the back of the television.
Do not allow water or moisture to enter the TV or power adapter. Do NOT use in wet, moist
areas, such as bathrooms, steamy kitchens or near swimming pools.
Pull the plug out immediately, and seek professional help if the main plug or cable is
damaged, liquid is spilt onto the set, if accidentally exposed to water or moisture, if
anything accidentally penetrates the ventilation slots or if the set does not work normally.
Do not remove the safety covers. There are no user serviceable parts inside. Trying to
service the unit yourself is dangerous and may invalidate the product’s warranty. Qualified
personnel must only service this apparatus.
To avoid battery leakage, remove exhausted batteries from the remote control, or when not
using for a long period.
Do not break open or throw exhausted batteries on a fire.
Physical safety
’
’
’
’
’
’
’
’
’
Do not block ventilation slots in the back cover. You may place the TV in a cabinet, but
ensure at least 5cm (2”) clearance all around.
Do not tap or shake the TV screen, or you may damage the internal circuits. Take good care
of the remote control.
To clean the TV use a soft dry cloth. Do not use solvents or petroleum based fluids.
Do not install near any heat sources such as radiators, heat registers, stoves or other
apparatus (including amplifiers) that produce heat.
Do not defeat the safety purpose of the polarized or grounding-type plug. A polarized plug
has two blades with one wider than the other. A grounding type plug has two blades and a
third grounding prong, the wide blade, or the third prong is provided for your safety. If the
provided plug does not fit into your outlet, consult an electrician for replacement of the
obsolete outlet.
Protect the power cord from being walked on or pinched particularly at plugs.
Unplug the apparatus during lightning storms or when unused for long periods.
Refer all servicing to a qualified service personnel. Servicing is required when the apparatus
has been damaged in any way, such as power-supply cord or plug is damaged, liquid has
been spilled, or objects have fallen into the apparatus, has been exposed to rain or moisture,
does not operate normally, or has been dropped.
Please always connect your television to a power outlet with protective ground connection.
4
What’s Included
Unit and Accessories
REPLAY
AUTO
CH.L IST
MTS
FREEZE
SETUP
TV Set
CONTENT
ENTER
CLEAR
Remote Control with Batteries
ELEFT406
40 Full HD Digital LED TV
Instruction Manual
Read all of the in structions bef ore using this TV and keep the
manual in a saf e place f or futu re ref erence.
User’s Manual
Products Technical Assistance
Quick Start Guide
5
Warranty Card
SOURCE
Back / Rear View
7
1. VGA and PC audio input
2. Antenna input (75 Ohm VHF/UHF).
3. HDMI1/HDMI2/HDMI3 input.
4. Component input terminal.
5. AV input.
6. Coaxial audio signal out plug.
7.. USB port
8 Headphone output
6 16
20
8
Connecting to external devices
Connecting external devices to your LED TV
AV
Video
Y
Pb
Pr
Right
USB
8
Remote Control Key Functions
Power button
Signal source selection button
Numeric buttons
Channel setup button
Channel Return button
Menu Return button
ASPECT button
Picture Mode button
Sound Mode button
REPLAY
REPLAY button
Mute button
Volume selection button
Channel selection button
Rewind button
Information button
Play / pause button
UP button
LEFT button
Exit the OSD menu button
AUTO button
STOP button
CH.LIST button
Prev button
FREEZE button
Next button
CONTENT button
SETUP button
Forward button
RIGHT button
HOME button
DOWN button
AUTO
CH.L IST
MTS
FREEZE
SETUP
CONTENT
ENTER
CLEAR
ADD / ERASE button
FAV button
REPEAT button
MTS button
CC button
V-CHIP button
ENTER button
CLEAR button
If there is light around the TV, the remote control may fail or work abnormally.
If not using the remote for a long period of time, please remove the batteries.
Remote control function keys to practice prevail.
9
Remote Control Key Functions
INPUT
REPEAT
Roku Operation
Press button to stop.
Replay : Press Replay button to repeat.
*INFO: Press*INFO button to display the information.
SETUP/ CONTENT: Press SETUP/ CONTENT button to automatic switching to the RoKu home page.
Home button: Press Home button to switch to HDMI2 as the source input ,or turn to Home menu of the MHL device.
10
Operating Your Television
Basic Operations
Turning Your TV On and Off
TURN ON LED TV
1. Connect to power with the main power cable, at this time the TV will enter STANDBY mode
and the LED will be red.
2. From the STANDBY mode, use the POWER button either on the main unit or on the remote
to turn your television on.
TURN OFF LED TV
From ON mode, use the POWER button either on the main unit or on the remote to turn your
television to STANDBY mode.
Select Your Onscreen Language Preference
After connecting your TV antenna or cable wire, turn the television ON. The quick setup wizard will
display on-screen. Select your preferred setting followed by antenna options if you will view
local over-the-air TV broadcasts from an antenna. Theses channels will be stored in the TV tuner memory after performing Channel Auto Scan.
In Home Mode, the television display can reduce power consumption.
In Standard Mode, the television provides a more dynamic picture that will
increase power consumption.
Note: If using your LED TV for the first time, you should select the language which will be used
for displaying menus and information boxes.
Press / button to select
Menu Language.
.
Press / button to select your desired language.
When you are satisfied with your choice, press the EXIT to exit.
Volume Adjustment
1. Press VOL +/- to adjust the volume
2. If you want to switch the sound off, press the MUTE
11
, Press again to resume.
AUTO
Operating Your Television
Navigating the Onscreen Display
Press the MENU button to display the main menu.
Use / buttons to navigate and select the available menus.
Picture
Picture
Picture Mode
Audio
Time
50
Brightness
50
Color
50
Tint
Setup
Sharpness
Lock
Time
Blue Screen
On
Setup
50
Treble
50
Balance
0
Auto Volume
On
Channel
Exit
RAW
Audio Language
Move
Picture
English
Cable
Sleep Timer
Auto Scan
Audio
Favorite
Time
Exit
Select
Picture
Air/Cable
Audio
Off
SPDIF Type
Lock
Select
Move
Bass
Surround Sound
50
Normal
Channel
Audio
0
Color Temp.
Standard
Sound Mode
Standard
Contrast
Off
Time Zone
Pacific
Daylight Saving Time
Show/Hide
Off
Time
Channel No.
Setup
Channle Label
Setup
DTV Signal:
Lock
Channel
Lock
Select
Move
Channel
Exit
Picture
Select
Move
Picture
Menu Language
Enter Password
Transparency
----
Audio
Audio
Time
Time
Zoom Mode
Noise Reduction
English
Off
Wide
Middle
Advanced
Closed Caption
Setup
Setup
DLC
On
Display Mode
Lock
Channel
Lock
Move
Select
Channel
Exit
Home Mode
Restore Default
Move
Select
Exit
Choosing a TV Channel
1. Use the CH+/CH- on the front panel or on the remote control.
Press CH+ to increase the channel.
Press CH- to decrease the channel.
2. Using 0-9 remote keys.
Enter the channel number with the 0-9 remote keys, then press “OK ” to select the channel.
For example:
1. Press 4, then press “ OK ” to select channel 4.
2. Press 4, then press 5, then press “ OK ” to select channel 45.
3. Press 1, then press 2, then press 1, finally press “ OK ” to select channel 121.
12
Exit
Operating Your Television
Selecting Input Source
You can display the input screen menu by pressing SOURCE on the
remote control or SOURCE at the side of the panel, press / button to
select, press “OK ” to confirm.
INPUT SOURCE
TV
Component / AV
HDMI1
HDMI2
HDMI3
VGA
USB
Picture Menu Options
Press the MENU at the side of the panel or MENU on the remote control and then use
PICTURE menu, press or OK to enter (see picture below).
/
to move the
Picture Mode
Select the type of picture which best corresponds to your viewing preferences by selecting Picture Mode in
the PICTURE menu. You may select the picture mode directly by pressing the P.MODE button on the
remote control.
Contrast
Press /
and then use
Brightness
Press / and then use
/ to adjust the contrast of the picture.
Picture
/ to adjust the brightness of the picture.
Picture Mode
Audio
Color
Press
/
and then use
/ to adjust the color of the picture.
Time
Press
/
and then use
Sharpness
Press / and then use
/ to adjust the tint of the picture.
to adjust the sharpness of the picture.
Color Temp.
Press /
to select mode, Cool, Warm, Normal.
Blue Screen
Press / and then use
Lock
Channel
/
/ to select On or Off.
13
50
Brightness
50
Color
50
0
Tint
Setup
Tint
Standard
Contrast
50
Sharpness
Color Temp.
Normal
Blue Screen
On
Move
Select
Exit
Operating Your Television
Audio Menu Options
Press MENU at the side of the panel or MENU on the remote control and then use /
AUDIO menu, press or OK to enter (see picture below).
Sound Mode
Press / and then use
Bass
Press / and then use
/ to select User, Standard, Music and Movie.
Picture
Standard
Sound Mode
/ increase or decrease the level of the
Audio
Time
lower-pitched sounds.
Bass
50
Treble
50
0
Balance
Surround Sound
Setup
Treble
to move the
Off
Auto Volume
On
SPDIF Type
Press / and then use
higher-pitched sounds.
/
to increase or decrease the level of
Lock
RAW
Audio Language
English
Channel
and then use
/
Exit
Select
Move
Balance
Press /
to adjust the audio output between left and right speakers.
Surround Sound
Press
/
to switch surround sound On or Off.
Auto Volume
Press
/
to switch auto volume control On or Off. This function allows volume to be controlled automatically.
SPDIF Type
Press
/
to select between PCM or RAW.
Audio language
Press
/
to select audio languages among: English, French, Spanish.
Time Menu Options
Press the MENU at the side of the panel or MENU on the remote control and then use
TIME menu, pr ess or OK to enter (see picture below).
/
to move the
Sleep Timer
Press / and then use
/ to set up the sleep timer among: Off,
5min, 10min, 15min, 30min, 45min, 60min, 90min, 120min, 180min
or 240min.
Time Zone
Press / and then use
Sleep Timer
Audio
Time Zone
Off
Pacific
Daylight Saving Time
/
to set up the time zone among: Pacific,
Alaska, Hawaii, Eastern, Central or Mountain.
Daylight Saving Time
Press / and then use
Picture
Off
Time
Setup
Lock
/
to set up the daylight saving time
On or Off.
14
Channel
Move
Select
Exit
Operating Your Television
Setup Menu Options
Press the MENU at the side of the panel or MENU on the remote control and then use
or OK to enter (see picture below).
SETUP menu, press
/
to move the
Picture
English
Menu Language
Menu Language
Press / and then use
Français or Español.
Transparency
Audio
/
to select menu language among: English,
Wide
Noise Reduction
Time
Middle
Advanced
Closed Caption
Setup
Transparency
Press / and then use
Off
Zoom Mode
/
to turn on or off the transparency function.
Lock
Channel
DLC
On
Display Mode
Restore Default
Home Mode
Zoom Mode
Press / and then use
/
Noise Reduction
Press / and then use
/ to select the noise reduction mode among: Weak, Middle, Strong, Off.
Move
Select
Exit
to select the zoom mode among: Wide, Zoom, Cinema or Normal.
Picture
H-POS
50
V-POS
50
50
Audio
Clock
Time
Phase
Auto
50
Setup
Lock
Channel
Adjust
Move
Return
Picture
Off
CC1
CC Mode
Basic Selection
Audio
Advanced Selection
Service1
Option
Time
Setup
Lock
Channel
Select
Move
Return
Picture
Font Style
Custom
Default
Audio
Font Size
Font Edge Style
Default
Default
Time
Font Edge Color
FG Color
BG Color
FG Opacity
BG Opacity
Default
Default
Default
Default
Default
Mode
Setup
Lock
OPTION
Press / and then use
to enter into the following menu.
Press / and then use / to select.
DLC
Press / and then use / to dynamic luminance control On or Off.
Channel
Select
Move
Return
Picture
Audio
Are you sure?
Restore Default
Select “Restore Default”, press OK, and it will display “Are you sure?”
select “Yes” to select the factory default settings.
Time
Yes
Lock
Channel
15
No
Setup
Select
Move
Return
Operating Your Television
Lock Menu Options
Press the MENU at the side of the panel or MENU on the remote control and then use
or OK to enter (see picture below).
LOCK menu, press
/
to move the
Use the DOWN button to highlight the “Enter Password”item, use the numeric keys to input 4-digital
password, then the screen will display the junior menu. After settings, press menu button to exit.
NOTE: The factory password is 0000.
Picture
Picture
Enter Password
Change Password
----
Audio
Input
Audio
System Lock
Off
US
Time
Time
Canada
RRT Setting
4-digital password
Setup
Setup
Lock
Lock
Reset RRT
Clear Lock
Channel
Move
Select
Exit
Channel
Move
Return
Next
Change Password
Use DOWN button to select the “Change Password” item, then press
RIGHT button to enter into the following menu.Input the new 4-digital
password and input it again to confirm.
System Lock
Allows you to turn on or off the system lock.If you turn off the system
lock, then the following items(US, Canada, RRT Setting and Reset RRT)
will unable to use.
US
Use Down button to highlight the “US”item, then press RIGHT button to
enter into the following menu.
Picture
Audio
Enter New Password
----
Confirm Password
----
Time
Setup
Lock
Channel
0-9
Return
Canada
Use Down button to highlight the “Canada” item, then press RIGHT button
to enter into the following menu.
Canada English
Use LEFT and RIGHT buttons to select among: E, C, C8+, G, PG,
14+ and 18+.
Canada French
Use LEFT and RIGHT buttons to select among: E, G, 8ans+,
13ans+, 16ans+ and 18ans+
Picture
Audio
Canada English
E
Canada French
E
Time
Setup
RRT Setting
Rating Region Table setting.
Lock
Channel
Reset RRT
Allows you to reset the RRT setting.
Clear lock of the systerm lock setting.
16
Move
Select
Return
Operating Your Television
Parental Control
Press Enter to enter the sub-menu and then use the 0-9 to enter the correct password: 0,0,0,0. If used, this option feature can
“block” undesirable programming from appearing on the TV. Parental Control offers the user a wide variety of options and settings
that restrict or “block” the programming that can appear on the TV. Parental Control allows the user the capability of defining which
program rating they consider acceptable, to the younger more sensitive viewer. It can be preset and turned either on or off by the
user who specifies the secret 4-number code, the password. The number of hours blocked are specified. General audiences and
children blocks should be both programmed into the TV’s memory. Viewer ratings are specified for both TV and the motion picture
industry; both rating systems should be used, for complete coverage. The ratings are based on the ages of children.
Overview
To ensure complete coverage for all TV programs, (movies and regular TV shows) choose a rating for MPAA, from the selections
below, as well as ratings from the TV Parental Guidelines Rating Systems below, using the Age Block option for General Audiences,
and for children. In addition to those, you may wish to add additional restrictions from the content block menu, and submenus
examples below.
Things to Consider before Setting up Parental Control
Determine which rating you consider acceptable to the viewer. (For example, if you choose TV-PG, more restrictive ratings will be
automatically blocked; the viewer will not be able to see: TV-PG, TV-14, or TV-MA rated programming.) Do you want to block the
auxiliary video source entirely? (Blocks the signal sent by the equipment, such as VCR, connected to the TV Audio/Video input jacks)
Or leave unblocked, then choose allowable ratings. Block program “Content” based on individual parameters such as: Strong Dialog,
Bad Language, Sex Scenes, Violence Scenes, or Fantasy. Violent Scenes; in Content Blk option. Select a secret password, in the Set
Password option, using the numbers keys on the remote. Do not forget the password, it is the only way you can access the Parental
Control menu and change rating selections, or turn Parental Control off. Do you want the Parental Control to be active at all times? If
not, you can turn it on or off with the Lock On/Off option.
’ You can set different Parental Control viewing restrictions for general audiences and for children, both can be active at the same time.
’ Simply specifying one content block such as Sex Scenes, will not automatically restrict the programming that appears from the video sources.
’ Even if you choose to leave the AUX inputs unblocked, the ratings you specify will automatically restrict the programming that appears from
the video sources.
’ You can not disable Parental Control by disconnecting the TV from power. Block hours will be automatically reset to the original block time
setting specified if power is disconnected.
Information
Motion Picture Association of America (MPAA) Rating System
Grade
G
General Audiences
PG
Parental Guidance Suggested
PG-13
Parental Guidance Strongly
Cautioned
R
Restricted viewing
NC-17
No Children Under age 17
X
Hard Core Films
No Rating
No Rating
Meaning
Content not offensive to most viewers
Content is such that parents may not want their children to view the program
Program is inappropriate for preteens, with a greater degree of offensive material suggested than a PG
rated program
Not for children under 17, Strong element of sex and/or violence
Not for children under 17 under any circumstances. Strong sexual content
Same as NC-17 rating
MPAA Not Rated
TV Parental Guideline Rating System
Grade
TV-Y
Young Children
TV-Y7
Children 7 and over
TV-G
Parental Audience
TV-PG
Parental Guidence
TV-14
Parents Strongly Cautioned
TV-MA
Mature Audience Only
Meaning
Content not offensive to most viewers
Considered suitable for children over 7, may contain Fantasy Violence Scenes
Considered suitable for all audiences; children may watch unattended
Suggested Unsuitable for younger children, may contain; Suggestive Dialogue, Bad Language, Sex, and Violence Scenes
Unsuitable for children under 14, may contain: Strong Dialogue, Bad Language, Sex, and Violence Scenes
Adults only, may contain Strong Dialogue, Bad Language, Sex, and Violent Scenes
Canadian Rating: Canadian English is used throughout all English-speaking Canada (C, C8+, G, PG, 14+, 18+).
Canadian French is used in Quebec (G, 8 ans+, 13 ans+, 16 ans+, 18 ans+)
Note: The V-Chip will automatically block certain categories that are “more restrictive”. If you block TV-Y
category, then TV-Y7 will be automatically blocked. Similarly, if you block TV-G category, then all the categories
in the “young adult” will be blocked (TV-G, TV-PG, TV-14, and TV-MA).
17
Operating Your Television
Channel Menu Options
Press the MENU at the side of the panel or remote control and then use
Press or OK to enter (see picture below).
Air/Cable/QAM
Allows you to select antenna between Air , Cable and QAM.
/
to move the CHANNEL menu.
Picture
Cable
Air/Cable/QAM
Audio
Auto Scan
Favorite
If you select “Air”as input signal in Antenna item, you can press RIGHT
button to search the channels automatically.
Time
Show/Hide
Channel No.
Setup
Channle Label
DTV Signal:
The receivable channels will be stored automatically.When searching
channels, press MENU to stop.
Lock
Channel
Select
Move
Exit
If you select “Cable”as input signal in Antenna item, allows you to select
Cable System among: AUTO, STD, IRC and HRC.Use DOWN button to
highlight the “Start to Scan”, then press RIGHT button to search the
Picture
AUTO
Cable System
channels automatically.The receivable channels will be stored
Audio
automatically. When searching channels, press MENU to stop.
Time
Start to Scan
Setup
Auto Scan
Use Down button to highlight the “Auto Scan” item, then press RIGHT
button to enter into the following menu.
Favorite
Allows you to add these channels which you desired as the favorite
channels.
Use UP or DOWN button to highlight the “Favorite”item, then press
RIGHT button to enter into the following menu.
Use UP and DOWN button to highlight the desired item, then press
ENTER button to add or remove the highlighted channel as favorite.
Lock
Channel
Move
Select
Return
Picture
Audio
RF CH :
Found :
Time
50
0
Setup
Show / Hide
Allows you to show or hide the channels.
Use UP or DOWN button to highlight the “Show / Hide” item, then
press RIGHT button to enter into the following menu.
Use UP and DOWN button to highlight the desired item, then press
ENTER button to show or hide the highlighted channel.
Channel No.
Display the number of current channel.
Lock
Channel
Picture
Audio
Move
Next
Channel
Channel Name
50-1
KOCE-HD
KOCE-SD
KOCE-LB
50-2
50-3
Return
Favorite
Time
Setup
Channel Label
Display the label of current channel.
Lock
Channel
DTV Signal:
Display the quality of current DTV signal.
18
Move
Press’OK’Change
Return
Operating Your Television
If you select “QAM” as the input signal in the “Antenna” option, these frames will be displayed automatically
but these frames will be displayed only in the first scan, the system will scan analog plus digital (64/256QAM)
R
r
ro
ig
ht
Er
19
Operating Your Television
USB Menu Options
The TV is a widescreen TV with an USB port. With the USB port the TV can access USB flash drive to the
USB port of the TV and press the SOURCE button to select USB to start browsing for music and picture.
In the USB function
USB
USB
C:\
Photo
C:
C:\
Music
Photo
mblog.jpg
C:
mblog.jpg
Music
LOVE.mp3
LOVE.jpg
Title:
Artist:
Album:
Year
Bitrate
Stop
00:00
001/001
Total size:2.0GB
Unused size:1.8GB
Select
You can use the
534 x 800
or
34.3KB
Move
Play File:1
Repeat
Play File:1
Total size:2.0GB
Unused size:1.8GB
02:38
002/002
Select
Move
Repeat
button to select Photo or Music.
You can use the or button to select the file you want and use the OK to play file.
You can use the
button to play or pause the file you want.
You can use the
You can use the
button to return main menu.
or
button to select the file you want.
Note: phote file format just supported :JPEG
music file format just supported :MP3
20
Operating Your Television
Connecting an MHL-enabled device
You can connect an MHL-enabled device, such as a cell phone or Roku Streaming Stick™, and view your device’s screen on your TV.
To connect an MHL-enabled device:
1 Press INPUT to open the Input Source list.
2 Press or to select HDMI 2, then press OK.
3 Connect an MHL cable (not provided) to the micro USB port on the device,
then connect the other end of the cable to the HDMI 2/MHL jack on the
side of your TV.
4
MHL-enabled device
HDMI cable with
HDMI-to-MHL
adapter
Your device’s menu will vary depending on the device and the apps
you have loaded on the device.
RoKu Menu Options
Boot
Stick smart TV into the TV's HDMI2 ports.
Press power button to turn on the TV.
Cut the TV signal source options to HDMI2.
You can use Home button to switch to HDMI2 as the source input ,or turn to Home menu
of the MHL device.
You can use
button for quick rewind search.
You can use
once to pause, Press
again to return to normal play.
You can use
button for quick forwars search.
You can use
button to stop.
You can use Replay button to repeat.
You can use *INFO button to display the information.
You can use SETUP/ CONTENT button to automatic switching to the RoKu home page.
21
Troubleshooting
If your television does not operate normally or does not turn on, please check the following
troubleshooting questions. Remember to also check the other connected electronic devices, such as DVDs
or Blu-ray players to pinpoint any problem. If the television still fails to operate normally, please contact
technical support (refer to Warranty page).
SYMPTOM
POSSIBLE CAUSE
REMEDY
Dead. No LED lit
No power to the TV.
Check all connections to the TV’s AC socket.
Dead. No LED lit red
Set in standby mode.
Press either the Power button or the Standby button
on the remote control.
No signal.
Blue screen
Noisy, snowy, ghosting
picture (TV)
No sound
Press SOURCE button to select the correct source
Incorrect source selected.
Poor antenna signal.
If using an indoor antenna, try adjusting the antenna
postion. Check antenna connections
Sound “Mute”.
Turn sound “Mute” OFF.
Volume set too low.
Check volume settings.
External leads not connected
“if used”.
Check that all external leads are connected properly.
22
Troubleshooting
Before contacting the service technician, perform the following simple checks. If any problem still persists,
unplug the LED TV and call for assistance.
PROBLEM
POSSIBLE SOLUTION
No sound and picture
- Check that the main plug has been connected to a wall
outlet
- Check that you have pressed the POWER button on the
front of the TV set
- Check the picture contrast and the brightness setting
Red LED indicator light
Set in standby mode. Press either the POWER button or
the Standby button on the remote control
Normal picture but no sound
- Check the volume
- Sound muted? Press the MUTE button
- Try another channel, the problem may be with the
broadcast
- Are the audio cables installed properly?
The remote control does not work
- Check to see if there are any objects between the TV
and remote control causing obstruction
- Are batteries installed with correct polarity (+ / -)
- Correct remote operating mode set: TV, VCR, etc?
- Install new batteries
Power suddenly turns off
- Is the sleep timer set?
- Check the power control settings. Power may be
interrupted
- No broadcast on the station tuned
Picture appears slowly after switching on
- This is normal, the image is muted during the product
start up process. Please contact a service provider if
the picture has not appeared after 5 minutes
Poor Color or picture
- Adjust the color in Menu option
- Keep a sufficient distance between the product and the
VCR
- Try another channel, the problem may be with the
broadcast
- Are the VIDEO cables installed properly?
- Activate any function to restore the brightness of the
picture
Horizontal/vertical bars or picture shaking
- Check for local interference, such as an electrical
appliance or power tool
Blue Screen
- Press SOURCE button to select correct source
Poor reception on some channels
- Station or cable experiencing problems. Tune to
another station
- Station signal is weak, reorient antenna to receive better
reception
- Check for sources of possible interference
Lines or streaks in pictures
- Check the antenna (change the direction of the
antenna)
No output from one of the speakers
- Adjust balance in the Menu option
23
Troubleshooting
NOTE: When there is a problem in VGA mode (only when VGA mode is applied)
PROBLEM
POSSIBLE SOLUTION
The signal is out of range
- Adjust resolution, horizontal frequency, or vertical
frequency
- Check whether the signal cable is connected or loose
- Check the input source
Vertical bar or stripe on background, horizontal noise and Set the auto configure or adjust clock, phase or H/V
incorrect position
position
Screen Color is unstable or is a single Color
- Check the signal cable
- Re-install the PC video card
Maintenance
Early malfunctions can be prevented. Careful and regular cleaning can extend the amount of time you will
have with your new TV. Be sure to turn the power off and unplug the power cord before you begin any
cleaning.
Do not use your TV in areas that are too hot or too cold, because the cabinet may warp or the screen
may malfunction. Your TV works best in temperatures that are comfortable to you.
o
o
o
o
Storage temperatures are 32 to 122 F (0 to 50 C)
o
o
o
o
Working temperatures are 32 to 104 F (0 to 40 C)
Do not place your TV in direct sunlight or near a heat sorce.
Cleaning the screen
1.
A great tip to dust off your screen. Wet a soft cloth in a mixture of lukewarm water and a little fabric
softener or dish washing detergent. Wring the cloth until it’s almost dry, and then use to wipe the
screen.
2. Make sure the excess water is off the screen, then let air-dry before you turn on the TV.
Cleaning the Cabinet
To remove dirt or dust, wipe the cabinet with a soft, dry, lint-free cloth. Please be sure not to use a wet
cloth.
Extended Absence
If you expect to leave your TV dormant for a long time (such as a vacation), it is a good
idea to unplug the power cord to protect against possible damages from lightning or
power surges.
24
The FCC Wants You To Know
This equipment has been tested and found to comply with the limits for a Class B digital device,
pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection
against harmful interference in a residential installation.
This equipment generates, uses, and can radiate radio frequency energy and, if not installed or
used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation.
If this equipment does cause harmful interference to radio or television reception, which can be
determined by turning the equipment off and on, the user is encouraged to try to correct the
interference by one or more of the following measures: 1) reorient or relocate the receiving antenna; 2) increase the separation between the equipment and the receiver; 3) connect the equipment to an outlet on a circuit different from that to which the receiver is connected;
4) consult the dealer or an experienced radio/TV technician for additional
suggestions.
Any changes or modifications not expressly approved by the party responsible for compliance
could void the user’s authority to operate the equipment. Where shielded interface cables have
been provided with the product or specified additional components or accessories elsewhere defined to be used with the installation of the product, they must be used in order to ensure compliance with FCC regulation.
Canadian DOC statement
Standard Television Receiving Apparatus Canada BETS-7
This Class B digital apparatus complies with Canadian ICES-003.
Specifications
Panel Size
40 inches diagonally
Display Type
LED
Panel Technology
TFT
Panel 60 Hz vs 120 Hz
120Hz
Display Resolution
1080P
HD Compatible
up to 1080p
Panel Resolution
1920 x 1080
Aspect Ratio
16:9
Dynamic Contrast Ratio - panel
3,000:1
Brightness (Centre Typ.) cd/m2
200
Response Time (G to G)
6.5 ms
Lamp Life (Typ. Hours)
50, 000 hours
Horizontal Viewing Angle (At CR>10)
178
Vertical Viewing Angle (At CR>10)
178
25
This product contains electrical or electronic materials. The presence of these materials may, if not disposed of properly, have potential
adverse effects on the environment and human health.
Presence of this label on the product means it should not be disposed of as unsorted waste and must be collected separately. As a
consumer, you are responsible for ensuring that this product is disposed of properly. To find out how to properly dispose of this product,
please go to www.elementelectronics.com and click on Sustainability.
This TV incorporates High-Definition Multimedia Interface (HDMITM) technology. HDMI, the HDMI logo and High-Definition Multimedia
Interface are trademarks or registered trademarks of HDMI Licensing LLC.
Download PDF
Similar pages
User Guide CANCELING A PROCEDURE
32 HD Digital LED TV
32 Full HD Digital LCD TV
40 Full HD Digital LED TV - Webcollage Content Publisher
60 FULL HD Digital LCD TV