Model No.
TH-42LFE7U
TH-42LFE7E
TH-50LFE7U
TH-50LFE7E
TH-65LFE7U
TH-65LFE7E
TH-42LFE7ER
Operating Instructions
FULL HD LCD Display (for business use)
h
English
Please read these instructions before operating your set
and retain them for future reference.
Dear Panasonic Customer
Welcome to the Panasonic family of customers. We hope that you will have many years of
enjoyment from your new LCD Display.
To obtain maximum benefit from your set, please read these Instructions before making
any adjustments, and retain them for future reference.
Retain your purchase receipt also, and note down the model number and serial number of
your set in the space provided on the rear cover of these instructions.
Visit our Panasonic Web Site
http://panasonic.net
Table of Contents
Before use
• Illustrations and screens in this Operating Instructions are images for illustration purposes, and may
be different from the actual ones.
• Descriptive illustrations in this Operating Instructions are created mainly based on the 65 inch model.
Important Safety Instructions.................................. 1
FCC STATEMENT ...................................................... 2
Important Safety Notice ........................................... 3
Safety Precautions ................................................... 4
Accessories .............................................................. 7
Accessories Supply ................................................. 7
Remote Control Batteries ........................................ 7
Connections .............................................................. 8
AC cord connection ................................................. 8
Video equipment connection ................................... 8
AUDIO OUT connection .......................................... 9
HDMI connection ..................................................... 9
DVI-D IN connection .............................................. 10
PC Input Terminals connection ...............................11
SERIAL Terminals connection ............................... 12
IR IN/OUT (infrared signal) connection ................. 13
CHARGE Terminals connection ............................ 13
Power On / Off......................................................... 14
Selecting the input signal ...................................... 16
Basic Controls ........................................................ 17
ASPECT Controls ................................................... 19
Digital Zoom ............................................................ 20
On-Screen Menu Displays ..................................... 21
Adjusting Pos./Size ................................................ 22
Picture Adjustments ............................................... 24
Advanced settings ................................................. 25
Sound Adjustment .................................................. 26
PRESENT TIME Setup / Set up TIMER .................. 27
PRESENT TIME Setup.......................................... 27
Set up TIMER ........................................................ 28
Screensaver (For preventing image retention) .... 29
Setup of Screensaver Time ................................... 30
Wobbling ................................................................. 30
No activity power off .............................................. 31
ii
ECO Mode settings................................................. 32
Customizing the Input labels................................. 33
Selecting the On-Screen Menu Language............ 34
Customizing the On-Screen Menu Display .......... 34
Setup for MULTI DISPLAY ...................................... 35
How to Setup MULTI DISPLAY ............................. 35
ID Remote Control Function .................................. 36
Setup for Input Signals .......................................... 37
YUV / RGB-IN select ............................................. 37
Signal menu .......................................................... 38
Cinema reality ....................................................... 38
XGA Mode ............................................................. 39
Sync ...................................................................... 39
HDMI Range .......................................................... 40
Input signal display ................................................ 40
Network Setup ........................................................ 41
Options Adjustments ............................................. 43
Input Search .......................................................... 45
RS-232C/LAN Information Timing ......................... 46
Using Network Function ........................................ 47
Network Connection .............................................. 47
Command Control ................................................. 48
PJLink™ Protocol .................................................. 48
Using Web Browser Control .................................. 49
Before Using Web Browser Control....................... 49
Access from Web Browser .................................... 49
Display Control (BASIC CONTROL/OPTION
CONTROL Screen) ............................................... 50
NETWORK SETTING (NETWORK SETTING Screen) ... 51
Password Setting (CHANGE PASSWORD Screen) ....51
Crestron Connected™ page .................................. 52
Troubleshooting ..................................................... 54
Applicable input signals ........................................ 55
Shipping condition ................................................. 56
Speci¿cations ......................................................... 57
CAUTION
RISK OF ELECTRIC SHOCK
DO NOT OPEN
WARNING: To reduce the risk of electric shock, do not remove cover or back.
No user-serviceable parts inside. Refer servicing to quali¿ed service personnel.
The lightning flash with
arrow-head within a triangle
is intended to tell the user
that parts inside the product
are a risk of electric shock
to persons.
The exclamation point within
a triangle is intended to
tell the user that important
operating and servicing
instructions are in the papers
with the appliance.
WARNING : To prevent damage which may result in ¿re or shock hazard, do not expose this apparatus to
rain or moisture.
Do not place containers with water (Àower vase, cups, cosmetics, etc.) above the set.
(including on shelves above, etc.)
WARNING : To prevent electric shock, do not remove cover. No user serviceable parts inside. Refer servicing to
quali¿ed service personnel.
Important Safety Instructions
1) Read these instructions.
2) Keep these instructions.
3) Heed all warnings.
4) Follow all instructions.
5) Do not use this apparatus near water.
6) Clean only with dry cloth.
7) Do not block any ventilation openings. Install in accordance with the manufacturer’s instructions.
8) Do not install near any heat sources such as radiators, heat registers, stoves, or other apparatus (including
ampli¿ers) that produce heat.
9) Do not defeat the safety purpose of the polarized or grounding-type plug. A polarized plug has two blades with
one wider than the other. A grounding type plug has two blades and a third grounding prong. The wide blade
or the third prong are provided for your safety. If the provided plug does not ¿t into your outlet, consult an
electrician for replacement of the obsolete outlet.
10) Protect the power cord from being walked on or pinched particularly at plugs, convenience receptacles, and
the point where they exit from the apparatus.
11) Only use attachments / accessories speci¿ed by the manufacturer.
12) Use only with the cart, stand, tripod, bracket, or table speci¿ed by the manufacturer, or sold
with the apparatus. When a cart is used, use caution when moving the cart / apparatus
combination to avoid injury from tip-over.
13) Unplug this apparatus during lightning storms or when unused for long periods of time.
14) Refer all servicing to quali¿ed service personnel. Servicing is required when the apparatus has been damaged
in any way, such as power-supply cord or plug is damaged, liquid has been spilled or objects have fallen into
the apparatus, the apparatus has been exposed to rain or moisture, does not operate normally, or has been
dropped.
1
FCC STATEMENT
This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part
15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference
in a residential installation. This equipment generates, uses and can radiate radio frequency energy and, if not
installed and used in accordance with the instructions, may cause harmful interference to radio communications.
However, there is no guarantee that interference will not occur in a particular installation. If this equipment does
cause harmful interference to radio or television reception, which can be determined by turning the equipment
off and on, the user is encouraged to try to correct the interference by one or more of the following measures:
• Reorient or relocate the receiving antenna.
• Increase the separation between the equipment and receiver.
• Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.
• Consult the dealer or an experienced technician for help.
This device complies with Part15 of the FCC Rules. Operation is subject to the following two conditions: (1) This
device may not cause harmful interference, and (2) this device must accept any interference received, including
interference that may cause undesired operation.
FCC CAUTION:
To assure continued compliance, follow the attached installation instructions and use only shielded
interface cables when connecting to computer or peripheral devices. Any changes or modi¿cations not
expressly approved by Panasonic Corp. of North America could void the user’s authority to operate this
device.
FCC Declaration of Conformity
Model No. TH-42LFE7U, TH-50LFE7U, TH-65LFE7U
Responsible Party:
Contact Source:
Panasonic Corporation of North America
Two Riverfront Plaza, Newark, New Jersey 07102-5490
Panasonic System Communications Company of North America
1-877-655-2357
CANADIAN NOTICE:
This Class B digital apparatus complies with Canadian ICES-003.
Note:
Image retention may occur. If you display a still picture for an extended period, the image might remain on the
screen. However, it will disappear after a while.
Trademark Credits
• VGA is a trademark of International Business Machines Corporation.
• Microsoft®, Windows®, Windows Vista®, and Internet Explorer® are the registered trademarks or trademarks of
Microsoft Corporation in the United States and/or other countries.
• Macintosh, Mac, Mac OS, OS X and Safari are the trademarks of Apple Inc. registered in the United States and
other countries.
• PJLink is a pending trademark in Japan, the United States and other countries and regions.
• SVGA, XGA, SXGA and UXGA are registered trademarks of the Video Electronics Standard Association.
Even if no special notation has been made of company or product trademarks, these trademarks have been
fully respected.
• HDMI, the HDMI Logo, and High-De¿nition Multimedia Interface are trademarks or registered trademarks of
HDMI Licensing LLC in the United States and other countries.
• RoomView, Crestron RoomView and Fusion RV are registered trademarks of Crestron Electronics, Inc, and
Crestron Connected is the trademark of Crestron Electronics, Inc.
2
Important Safety Notice
WARNING
1) To prevent damage which may result in ¿re or shock hazard, do not expose this appliance to dripping
or splashing.
Do not place containers with water (Àower vase, cups, cosmetics, etc.) above the set. (including on
shelves above, etc.)
No naked Àame sources, such as lighted candles, should be placed on / above the set.
2) To prevent electric shock, do not remove cover. No user serviceable parts inside. Refer servicing to quali¿ed
service personnel.
CAUTION
This appliance is intended for use in environments which are relatively free of electromagnetic ¿elds.
Using this appliance near sources of strong electromagnetic ¿elds or where electrical noise may overlap with the
input signals could cause the picture and sound to wobble or cause interference such as noise to appear.
To avoid the possibility of harm to this appliance, keep it away from sources of strong electromagnetic ¿elds.
IMPORTANT INFORMATION
If a display is not positioned in a suf¿ciently stable location, it can be potentially hazardous due to falling. Many
injuries, particularly to children, can be avoided by taking simple precautions such as:
• Using cabinets or stands recommended by the manufacturer of the display.
• Only using furniture that can safely support the display.
• Ensuring the display is not overhanging the edge of the supporting furniture.
• Not placing the display on tall furniture (for example, cupboards or bookcases) without anchoring both the furniture
and the display to a suitable support.
• Not standing the displays on cloth or other materials placed between the display and supporting furniture.
• Educating children about the dangers of climbing on furniture to reach the display or its controls.
IMPORTANT: THE MOULDED PLUG
FOR YOUR SAFETY, PLEASE READ THE FOLLOWING TEXT CAREFULLY.
This display is supplied with a moulded three pin mains plug for your safety and convenience. A 10 amp fuse is
¿tted in this plug. Shall the fuse need to be replaced, please ensure that the replacement fuse has a rating of 10
amps and that it is approved by ASTA or BSI to BS1362.
Check for the ASTA mark
ASA
or the BSI mark
on the body of the fuse.
If the plug contains a removable fuse cover, you must ensure that it is re¿tted when the fuse is replaced.
If you lose the fuse cover the plug must not be used until a replacement cover is obtained.
A replacement fuse cover can be purchased from your local Panasonic dealer.
Do not cut off the mains plug.
Do not use any other type of mains lead except the one supplied with this display.
The supplied mains lead and moulded plug are designed to be used with this display to avoid
interference and for your safety.
If the socket outlet in your home is not suitable, get it changed by a quali¿ed electrician.
If the plug or mains lead becomes damaged, purchase a replacement from an authorized dealer.
How to replace the fuse. Open the fuse compartment with a screwdriver and replace the fuse.
3
Safety Precautions
WARNING
Setup
This LCD Display is for use only with the following optional accessories. Use with any other type of optional
accessories may cause instability which could result in the possibility of injury.
(All of the following accessories are manufactured by Panasonic Corporation.)
• Pedestal ....................................................... TY-ST42PE7 (for TH-42LFE7U/E/ER, TH-50LFE7U/E)
TY-ST65PE7 (for TH-65LFE7U/E)
We are not responsible for any product damage, etc. caused by use of the pedestal or wall-hanging bracket made
by other companies, or by failures in the installation environment for the pedestal or wall-hanging bracket even
during the warranty period.
Always be sure to ask a quali¿ed technician to carry out set-up.
Small parts can present choking hazard if accidentally swallowed. Keep small parts away from young children. Discard
unneeded small parts and other objects, including packaging materials and plastic bags/sheets to prevent them from
being played with by young children, creating the potential risk of suffocation.
Do not place the Display on sloped or unstable surfaces, and ensure that the Display does not hang over the
edge of the base.
• The Display may fall off or tip over.
Do not place any objects on top of the Display.
• If water is spills onto the Display or foreign objects get inside it, a short-circuit may occur which could result in ¿re
or electric shock. If any foreign objects get inside the Display, please consult your local Panasonic dealer.
Transport only in upright position!
• Transporting the unit with its display panel facing upright or downward may cause damage to the internal
circuitry.
Ventilation should not be impeded by covering the ventilation openings with items such as newspapers, table
cloths and curtains.
For suf¿cient ventilation;
Leave a space of 3 15/16” (10 cm) or more at the top, left and right, and 1 31/32” (5 cm) or more at the rear, and
also keep the space between the bottom of the display and the Àoor surface.
Cautions for Wall Installation
• Wall installation should be performed by an installation professional. Installing the Display incorrectly may lead to
an accident that results in death or serious injury. Furthermore, when installing on a wall, a wall hanging bracket
that conforms to VESA standards (TH-42LFE7U/E/ER: VESA 200×200, TH-50LFE7U/E: VESA 400×200,
TH-65LFE7U/E: VESA 400×400) must be used.
• If you terminate the use of the Display on the wall, ask a professional to remove the Display as soon as possible.
• When mounting the Display on the wall, prevent the mounting screws and power cable from contacting metal objects
inside the wall. An electric shock may occur if they contact metal objects inside the wall.
When installing the Display vertically, be sure to install the power indicator onto the top of the Display.
Do not install the product to a place where the product is exposed to direct sunlight.
• If the screen is exposed to direct sunlight, the liquid crystal panel may have adverse effect.
During installation, impacts and the like may damage the Display. Please handle with care.
4
Safety Precautions
When using the LCD Display
The Display is designed to operate on 110 - 127 or 220 - 240 V AC, 50/60 Hz.
Do not cover the ventilation holes.
• Doing so may cause the Display to overheat, which can cause ¿re or damage to the Display.
Do not stick any foreign objects into the Display.
• Do not insert any metal or Àammable objects into the ventilations holes or drop them onto the Display, as doing so
can cause ¿re or electric shock.
Do not remove the cover or modify it in any way.
• High voltages which can cause severe electric shocks are present inside the Display. For any inspection, adjustment
and repair work, please contact your local Panasonic dealer.
Ensure that the mains plug is easily accessible.
Do not use any power supply cord other than that provided with this unit.
• Doing so may cause ¿re or electric shocks.
Securely insert the power supply plug as far as it will go.
• If the plug is not fully inserted, heat may be generated which could cause ¿re. If the plug is damaged or the wall
socket is loose, they shall not be used.
Do not handle the power supply plug with wet hands.
• Doing so may cause electric shocks.
Do not do anything that may damage the power cable. When disconnecting the power cable, pull on the plug
body, not the cable.
• Do not damage the cable, make any modi¿cations to it, place heavy objects on top of it, heat it, place it near any
hot objects, twist it, bend it excessively or pull it. To do so may cause ¿re and electric shock. If the power cable is
damaged, have it repaired at your local Panasonic dealer.
Do not remove covers and NEVER modify the Display yourself
• Do not remove the rear cover as live parts are accessible when it is removed. There are no user serviceable parts
inside. (High-voltage components may cause serious electrical shock.)
• Have the Display checked, adjusted, or repaired at your local Panasonic dealer.
If the Display is not going to be used for any prolonged length of time, unplug the power supply plug from
the wall outlet.
To prevent the spread of ¿re, keep candles or other open Àames away from this product at all times.
If problems occur during use
If a problem occurs (such as no picture or no sound), or if smoke or an abnormal odour starts to come out
from the Display, immediately unplug the power supply plug from the wall outlet.
• If you continue to use the Display in this condition, ¿re or electric shock could result. After checking that the smoke
has stopped, contact your local Panasonic dealer so that the necessary repairs can be made. Repairing the Display
yourself is extremely dangerous, and shall never be done.
If water or foreign objects get inside the Display, if the Display is dropped, or if the cabinet becomes damages,
disconnect the power supply plug immediately.
• A short circuit may occur, which could cause ¿re. Contact your local Panasonic dealer for any repairs that need to
be made.
5
Safety Precautions
CAUTION
When using the LCD Display
Do not bring your hands, face or objects close to the ventilation holes of the Display.
• Heated air comes out from the ventilation holes at the top of Display will be hot. Do not bring your hands or face,
or objects which cannot withstand heat, close to this port, otherwise burns or deformation could result.
Be sure to disconnect all cables before moving the Display.
• If the Display is moved while some of the cables are still connected, the cables may become damaged, and ¿re or
electric shock could result.
Disconnect the power supply plug from the wall socket as a safety precaution before carrying out any
cleaning.
• Electric shocks can result if this is not done.
Clean the power cable regularly to prevent it becoming dusty.
• If dust built up on the power cord plug, the resultant humidity can damage the insulation, which could result in ¿re.
Pull the power cord plug out from the wall outlet and wipe the mains lead with a dry cloth.
Do not burn or breakup batteries.
• Batteries must not be exposed to excessive heat such as sunshine, ¿re or the like.
Cleaning and maintenance
The front of the display panel has been specially treated. Wipe the panel surface gently using only a cleaning
cloth or a soft, lint-free cloth.
• If the surface is particularly dirty, wipe with a soft, lint-free cloth which has been soaked in pure water or water in
which neutral detergent has been diluted 100 times, and then wipe it evenly with a dry cloth of the same type until
the surface is dry.
• Do not scratch or hit the surface of the panel with ¿ngernails or other hard objects, otherwise the surface may
become damaged. Furthermore, avoid contact with volatile substances such as insect sprays, solvents and thinner,
otherwise the quality of the surface may be adversely affected.
If the cabinet becomes dirty, wipe it with a soft, dry cloth.
• If the cabinet is particularly dirty, soak the cloth in water to which a small amount of neutral detergent has been
added and then wring the cloth dry. Use this cloth to wipe the cabinet, and then wipe it dry with a dry cloth.
• Do not allow any detergent to come into direct contact with the surface of the Display. If water droplets get inside
the unit, operating problems may result.
• Avoid contact with volatile substances such as insect sprays, solvents and thinner, otherwise the quality of the
cabinet surface may be adversely affected or the coating may peel off. Furthermore, do not leave it for long periods
in contact with articles made from rubber or PVC.
Usage of a chemical cloth
• Do not use a chemical cloth for the panel surface.
• Follow the instructions for the chemical cloth to use it for the cabinet.
Notes before use
The usage environment of the liquid crystal panel may have an effect on the screen display. In addition,
depending on the viewing angle, changes in hue or irregularities in brightness may occur.
• Please note that this is a characteristic of the liquid crystal panel and not a malfunction.
6
Accessories
Accessories Supply
Check that you have the accessories and items shown
Operating Instruction book
CD-ROM
(Operating
instructions)
Remote Control
Transmitter
N2QAYB000691
Batteries for the Remote
Control Transmitter
(R6 (UM3) Size × 2)
Power supply cord
TH-42LFE7U, TH-50LFE7U, TH-65LFE7U TH-42LFE7E/ER, TH-50LFE7E, TH-65LFE7E
Attention
Store small parts in an appropriate manner, and keep them away from young children.
Remote Control Batteries
Requires two R6 batteries.
1. Pull and hold the hook, then open
the battery cover.
2. Insert batteries - note correct
polarity (+ and -).
3. Replace the cover.
“R6 (UM3)” size
+
+
-
Helpful Hint:
For frequent remote control users, replace old batteries with Alkaline
batteries for longer life.
Precaution on battery use
Incorrect installation can cause battery leakage and corrosion that will damage the remote control transmitter.
Disposal of batteries should be in an environment-friendly manner.
Observe the following precaution:
1. Batteries shall always be replaced as a pair. Always use new batteries when replacing the old set.
2. Do not combine a used battery with a new one.
3. Do not mix battery types (example: “Zinc Carbon” with “Alkaline”).
4. Do not attempt to charge, short-circuit, disassemble, heat or burn used batteries.
5. Battery replacement is necessary when remote control acts sporadically or stops operating the Display set.
6. Do not burn or breakup batteries.
Batteries must not be exposed to excessive heat such as sunshine, ¿re or the like.
7
Connections
AC cord connection
AC cord
(accessory)
Notes:
• Insert the AC cord ¿rmly into place.
• When disconnecting the AC cord, be absolutely sure to disconnect the AC cord plug at the socket outlet ¿rst.
• The included AC cord is for use with this unit only.
Video equipment connection
IR IN/OUT
IR IN/OUT (infrared signal) Terminal
Enable connection of multiple displays.
(see page 13)
CHARGE OUT
Connect to separately sold devices such as
stick PCs to supply power. (see page 13)
SERIAL
SERIAL Input Terminal
Control the Display by connecting to PC.
(see page 12)
PC IN
PC Input Terminal
(see page 11)
DVI-D IN
DVI-D Input Terminal
(see page 10)
AV IN (HDMI 1, HDMI 2)
HDMI Input Terminal
(see page 9)
8
LAN: Connect to a network
to control the unit.
(see page 41, 47)
AUDIO IN (DVI-D / PC IN)
Connect the audio output
of a device connected to
DVI-D IN, PC IN.
(see page 10, 11)
AUDIO OUT
Connect to sound equipment
(see page 9)
Connections
AUDIO OUT connection
Notes:
• Additional equipment and cables shown are not supplied with this set.
• To output sound from the AUDIO OUT terminal of the Display, be sure to set “Output Select” to “AUDIO OUT” in the
“Sound Adjustment” menu. (see page 26)
Stereophonic sound code
audio equipment
Stereo mini plug (M3)
line-in
HDMI connection
[Pin assignments and signal names]
Pin No.
1
2
3
4
5
6
7
8
9
10
Signal name
T.M.D.S Data2+
T.M.D.S Data2
Shield
T.M.D.S Data2T.M.D.S Data1+
T.M.D.S Data1
Shield
T.M.D.S Data1T.M.D.S Data0+
T.M.D.S Data0
Shield
T.M.D.S Data0T.M.D.S Clock+
Pin No.
11
Signal name
T.M.D.S Clock
Shield
12
T.M.D.S Clock-
13
CEC
14
Reserved
(N.C. on device)
15
16
17
18
19
SCL
SDA
DDC/CEC
Ground
+5V Power
Hot Plug Detect
19
3 1
HDMI cable
18
4 2
Note:
Additional equipment and HDMI cable shown are not supplied with this set.
HDMI
AV OUT
HDMI
AV OUT
DVD player
9
Connections
DVI-D IN connection
PC with DVI-D
video out
Stereo mini plug (M3)
Shared
with PC
IN.
DVI-video cable (Within 5 m)
DVI-D Input Connector
Pin Layouts
1
Pin No.
8
9
16
17
24
Connection port view
1
2
3
4
5
6
7
8
9
10
11
12
Signal Name
T.M.D.S. data 2T.M.D.S. data 2+
T.M.D.S. data 2 shield
DDC clock
DDC data
T.M.D.S. data 1T.M.D.S. data 1+
T.M.D.S. data 1 shield
Pin No.
13
14
15
16
17
18
19
20
21
22
23
24
Notes:
• Additional equipment and cables shown are not supplied with this set.
• Image deterioration may occur depending on the length or the quality of the cable.
10
Signal Name
+5 V DC
Ground
Hot plug detect
T.M.D.S. data 0T.M.D.S. data 0+
T.M.D.S. data 0 shield
T.M.D.S. clock shield
T.M.D.S. clock+
T.M.D.S. clock-
Connections
PC Input Terminals connection
(Female)
Conversion adapter
(if necessary)
Mini D-sub 15p
COMPUTER
(Male)
Shared with
DVI-D IN.
Stereo mini plug (M3)
Audio
Connect a cable which matches
the audio output terminal on the computer.
Notes:
• Computer signals which can be input are those with a horizontal scanning frequency of 30 to 110 kHz and vertical scanning
frequency of 48 to 120 Hz. (However, the image will not be displayed properly if the signals exceed 1,200 lines.)
• The display resolution is a maximum of 1,440 × 1,080 dots when the aspect mode is set to “4:3”, and 1,920 × 1,080
dots when the aspect mode is set to “16:9”. If the display resolution exceeds these maximums, it may not be possible
to show ¿ne detail with suf¿cient clarity.
• The PC input terminals are DDC2B-compatible. If the computer being connected is not DDC2B-compatible, you will
need to make setting changes to the computer at the time of connection.
• Some PC models cannot be connected to the set.
• There is no need to use an adapter for computers with DOS/V compatible Mini D-sub 15P terminal.
• The computer shown in the illustration is for example purposes only.
• Additional equipment and cables shown are not supplied with this set.
• Do not set the horizontal and vertical scanning frequencies for PC signals which are above or below the speci¿ed
frequency range.
Signal Names for Mini D-sub 15P Connector
5
4
10 9
3
2
8
1
7
6
15 14 13 12 11
Pin Layout for PC Input
Terminal
Pin No.
Signal Name
Pin No.
Signal Name
Pin No.
Signal Name
1
R
6
GND (Ground)
11
NC (not connected)
2
G
7
GND (Ground)
12
SDA
3
B
8
GND (Ground)
13
HD/SYNC
4
NC (not connected)
9
+5 V DC
14
VD
5
GND (Ground)
10
GND (Ground)
15
SCL
11
Connections
SERIAL Terminals connection
The SERIAL terminal is used when the Display is controlled by a computer.
Note:
To use serial control for this unit, make sure to set the “Control I/F Select” in the “Network Setup” menu to “RS-232C”.
(see page 41)
COMPUTER
RS-232C Straight cable
(Male)
(Female)
D-sub 9p
1
Notes:
• Use the RS-232C straight cable to connect the computer to the Display.
• The computer shown is for example purposes only.
• Additional equipment and cables shown are not supplied with this set.
2
6
3
7
4
8
5
9
Pin layout for SERIAL Terminal
The SERIAL terminal conforms to the RS-232C interface speci¿cation, so that the Display can be controlled by a
computer which is connected to this terminal.
The computer will require software which allows the sending and receiving of control data which satis¿es the conditions
given below. Use a computer application such as programming language software. Refer to the documentation for the
computer application for details.
Signal names for SERIAL IN terminal
Communication parameters
Signal level
Synchronization method
Baud rate
Parity
Character length
Stop bit
Flow control
Pin No.
2
3
4
5
6
7
8
1 • 9
RS-232C compliant
Asynchronous
9600 bps
None
8 bits
1 bit
-
Details
RXD
TXD
DTR
GND
DSR
(Shorted in this set)
NC
These signal names are those of computer speci¿cations.
Basic format for control data
The transmission of control data from the computer
starts with a STX signal, followed by the command, the
parameters, and lastly an ETX signal in that order. If there
are no parameters, then the parameter signal does not
need to be sent.
STX
C1 C2 C3
Start
(02h)
:
P1 P2 P3 P4 P5
ETX
Colon
Parameter(s)
(1 - 5 bytes)
3-character
command (3 bytes)
End
(03h)
Notes:
• If multiple commands are transmitted, be sure to wait for
the response for the ¿rst command to come from this unit
before sending the next command.
• If an incorrect command is sent by mistake, this unit will
send an “ER401” command back to the computer.
• Consult an Authorized Service Center for detail instructions
on command usage.
12
Command
Command
PON
POF
AVL
AMT
IMS
DAM
Parameter
None
None
***
0
1
None
HM1
HM2
DV1
PC1
None
ZOOM
FULL
NORM
ZOM2
Control details
Power ON
Power OFF
Volume 000 - 100
Audio MUTE OFF
Audio MUTE ON
Input select (toggle)
HDMI 1 input (HDMI1)
HDMI 2 input (HDMI2)
DVI-D IN input (DVI)
PC IN input (PC)
Screen mode select (toggle)
Zoom1
16:9
4:3
Zoom2
With the power off, this display responds to PON command
only.
Connections
IR IN/OUT (infrared signal) connection
Connect between the IR OUT terminal of the ¿rst display and the IR IN terminal of the second display with a 3.5 mm
stereo mini plug.
Infrared signals will be sent from the ¿rst display to the second display.
First display
Second display
*
*
Third display
* Stereo mini plug (M3)
IR of the second display will not work in this connection.
It is possible to con¿gure a daisy chain connection by repeating the connection above.
CHARGE Terminals connection
Power can be supplied when a separately sold stick PC or such other device is connected.
Note:
To supply power, be sure to set “5V Charge” to “On” in the “Options” menu. (see page 44)
Pin Layout and Signal Names of CHARGE Terminal
1
2
3
1
+5V
2
NC
3
NC
4
GND
4
stick PC
USB cable
Up to 5V/500 mA power can be supplied to an external device when an image is received.
Ɣ If current exceeding the supply capacity Àows, output will be shut off and the following message will appear.
“5V CHARGE OUT overload. Please remove cable, then turn the display off/on.”
In this case, turn the power off and on with the remote control, etc.
Note:
If there is dust in a terminal, the protection circuit may function.
Cover the terminals, such as with tape, when not in use.
(The terminals are protected by tape when shipped from the factory.)
13
Power On / Off
Connecting the AC cord plug to the Display.
Connecting the plug to the Wall Outlet
Notes:
• Main plug types vary between countries. The power
plug shown at right may, therefore, not be the type
¿tted to your set.
• When disconnecting the AC cord, be absolutely
sure to disconnect the AC cord plug at the socket
outlet ¿rst.
Press the Power switch on the Display to turn the
set on: Power-On.
Power switch
Remote Control Sensor Power Indicator
Power Indicator: Green
Press the
button on the remote control to turn the Display off.
Power Indicator: Red (standby)
Press the
button on the remote control to turn the Display on.
Power Indicator: Green
Turn the power to the Display off by pressing the
the Display is on or in standby mode.
switch on the unit, when
Note:
During operation of the power management function, the power indicator turns
orange in the power off state.
14
Power On / Off
When ¿rst switching on the unit
Following screen will be displayed when the unit is turned on for the ¿rst time.
Select the items with the remote control. Unit buttons are invalid.
OSD Language
English (UK)
OSD Language
Deutsch
Français
1
Select the language.
Italiano
Español
2
ENGLISH (US)
Set.
PRESENT TIME Setup
1
Select “DAY” or “PRESENT TIME”.
2
Setup “DAY” or “PRESENT TIME”.
PRESENT TIME Setup
PRESENT TIME
1
Select “Set”.
Set.
MON
99 : 99
DAY
PRESENT TIME
PRESENT TIME Setup
PRESENT TIME
2
MON 99 : 99
Set
MON 99 : 99
Set
DAY
PRESENT TIME
TUE
10 : 00
Notes:
• Once the items are set, the screens won't be displayed when switching on the unit next time.
• After the setting, the items can be changed in the following menus.
OSD Language (see page 34)
PRESENT TIME Setup (see page 27)
Power ON warning message
The following message may be displayed when turning the unit power ON:
No activity power off Precautions
’No activity power off’ is enabled.
If “No activity power off” in Setup menu is set to “Enable”, a warning message is displayed every time
the power is turned ON. (see page 31)
This message display can be set with the following menu: Options menu
Power On Message (see page 44)
15
Selecting the input signal
Press to select the input signal to be played back from the equipment which
has been connected to the Display.
Input signals will change as follows:
HDMI1
HDMI2
PC
DVI
HDMI1: HDMI input terminal in AV IN (HDMI1).
HDMI2: HDMI input terminal in AV IN (HDMI2).
PC: PC input terminal in PC IN.
DVI: DVI input terminal in DVI-D IN.
Note:
Selecting is also possible by pressing the INPUT button on the
unit.
16
Basic Controls
Main Unit
Remote
control sensor
Power Indicator
The Power Indicator will light.
• Power-OFF .... Indicator not illuminated (The unit will
still consume some power as long as the
power cord is still inserted into the wall
outlet.)
• Standby ......... Red
Orange (When the control terminal
selection is “LAN”. See page 41)
• Power-ON ...... Green
• HDMI1 Power management
HDMI2 Power management
......................... Orange (With HDMI1 or HDMI2 input
signal. See page 32)
• PC Power management
....................... Orange (With PC input signal.
See page 32)
• DVI-D Power management
....................... Orange (With DVI input signal.
See page 32)
Brightness Sensor
Detects the brightness in the
viewing environment.
(See page 32)
External input terminals
Connects such devices as video
equipment or personal computers.
(see page 8)
Enter / Aspect button
(see page 19, 21)
Volume Adjustment
Volume Up “+” Down “–”
When the menu screen is displayed:
“+”: press to move the cursor up
“–” : press to move the cursor down
(see page 21)
MENU Screen ON / OFF
Each time the MENU button is pressed, the menu screen
will switch. (see page 21)
Normal Viewing
Picture
Setup
Sound
Pos./Size
INPUT button (Input signal selection) (see page 16)
Main Power On / Off Switch
17
Basic Controls
Remote Control Transmitter
ACTION button
Press to make selections.
ASPECT button
Press to adjust the aspect.
(see page 19)
Standby (ON / OFF) button
The Display must ¿rst be plugged into
the wall outlet and turned on at the power
switch (see page 14).
Press this button to turn the Display On,
from Standby mode. Press it again to turn
the Display Off to Standby mode.
POS. /SIZE button
(see page 22, 23)
PICTURE button
(see page 24, 25)
Sound mute On / Off
Press this button to mute the sound.
Press again to reactivate sound.
Sound is also reactivated when power is
turned off or volume level is changed.
N button
(see page 23, 24, 25, 26)
POSITION buttons
INPUT button
Press to select input signal sequentially.
(see page 16)
ECO MODE (ECO)
Press to change the ECO MODE
setup status. (see page 32)
FUNCTION buttons (FUNCTION)
(see page 45)
OFF TIMER button
The Display can be preset to switch to stand-by
after a ¿xed period. The setting changes to 30
minutes, 60 minutes, 90 minutes and 0 minutes (off
timer cancelled) each time the button is pressed.
30 min
60 min
90 min
0 min
When three minutes remain, “Off timer 3 min” will
Àash.
The off timer is cancelled if a power interruption
occurs.
AUTO SETUP button
Automatically adjusts the position/
size of the screen. (see page 22)
SET UP button (see page 27 - 42)
SOUND button (see page 26)
Volume Adjustment
Press the Volume Up “+” or Down
“–” button to increase or decrease
the sound volume level.
R button (see page 21)
Press the R button to return to
previous menu screen.
RECALL button
Press the “RECALL” button to
display the current system status.
1 Input label
2 Aspect mode (see page 19)
3 Off timer
The off timer indicator is
displayed only when the off
timer has been set.
4 Clock display (see page 44)
1
2
PC
4:3
4
10:00
Off timer
90min
Digital Zoom (see page 20)
18
3
ASPECT Controls
The Display will allow you to enjoy viewing the picture at its maximum size, including wide screen cinema format
picture.
Note:
Be aware that if you put the display in a public place for commercial purposes or a public showing
and then use the aspect mode select function to shrink or expand the picture, you may be violating
the copyright under copyright law. It is prohibited to show or alter the copyrighted materials of other
people for commercial purposes without the prior permission of the copyright holder.
Press repeatedly to move through the aspect options:
4:3
[from the unit]
Zoom1
Zoom2
16:9
The aspect mode changes each time the ENTER button is
pressed.
Note:
The aspect mode is memorized separately for each input terminal.
Aspect mode
16:9
Picture
Enlarged screen
Description
The display of the pictures ¿lls the screen.
In the case of SD signals, pictures with a 4:3 aspect
ratio are enlarged horizontally, and displayed. This
mode is suited to displaying anamorphic pictures with
a 16:9 aspect ratio.
Pictures with a 4:3 aspect ratio are displayed with their
original aspect ratio. Side panels are displayed at the
left and right edges of the screen.
4:3
Pictures with a 16:9 aspect ratio are displayed with
their original aspect ratio. The left and right edges of
the pictures are masked by side panels.
Zoom1
Letterbox pictures with a 16:9 aspect ratio are enlarged
vertically and horizontally so that their display ¿lls the
screen. The top and bottom edges of the pictures are
cut off.
Zoom2
Letterbox pictures with a 16:9 aspect ratio are enlarged
vertically and horizontally so that their display ¿lls the
screen. The top and bottom edges as well as the left
and right edges of the pictures are cut off.
19
Digital Zoom
This displays an enlargement of the designated part of the displayed image.
1
Display the operation guide.
Press to access Digital Zoom.
The operation guide will be displayed.
EXIT
1
During Digital Zoom, only the following buttons can be operated.
[Remote control]
POSITION /
ACTION button
2
Select the area of the image to be enlarged.
Press on the enlargement location to select.
The cursor will move.
EXIT
2
3
Select the magni¿cation required for the enlarged display.
Each time this is pressed, the magni¿cation factor changes.
This is shown in the image being displayed.
×1
4
×2
Return to normal display (quit Digital Zoom).
Press to exit from the Digital Zoom.
Notes:
• When power goes OFF (including “Off Timer” operation), Digital Zoom terminates.
• The Digital Zoom function cannot be selected while in the following operation state:
When MULTI DISPLAY Setup is On (see page 35).
When Screensaver is running. (see page 29, 30)
• While Digital Zoom is in operation, “Adjusting Pos./Size” cannot be used.
20
×3
×4
On-Screen Menu Displays
Remote Control
Unit
1 Display the menu screen.
Press to select.
(Example: Picture menu)
2 Select the item.
Select.
Picture
Normalise
Press.
Normal
Picture Mode
Backlight
Contrast
Brightness
Colour
Sharpness
White balance
Advanced settings
Normal
100
70
50
50
50
(Example:
Picture menu)
Select.
Normal
Max
FRAME CREATION
3
Press several times.
Each time the MENU button is pressed, the
menu screen will switch.
Normal Viewing
Picture
Setup
Sound
Pos./Size
Adjust.
Set.
Press.
Adjust.
4 Exit the menu.
Press.
Press several times.
to return to the
Press
previous menu.
Menu display list
Note: Menu that cannot be adjusted is grayout. Adjustable menu changes depending on signal, input and menu setting.
Picture menu
Setup menu
Setup
Picture
Normalise
Pos./Size menu
Normal
Picture Mode
Backlight
Contrast
Brightness
Colour
Sharpness
White balance
Advanced settings
Normal
100
70
50
50
50
FRAME CREATION
see page 24, 25
Normal
Max
1/2
Off
RGB
No activity power off
OSD Language
Pos./Size
Normalise
Auto Setup
Signal
Screensaver
Input label
ECO Mode settings
Wobbling
YUV/RGB-in select
Disable
English(UK)
Setup
MULTI DISPLAY Setup
Set up TIMER
PRESENT TIME Setup
Network Setup
Menu Display Duration
Menu Transparency
20
Sound menu
H-Pos
H-Size
V-Pos
V-Size
Clock Phase
Dot Clock
1:1 Pixel Mode
Sound
Normal
Normalise
Normal
Output Select
Sound Mode
Bass
Treble
Balance
Surround
0
0
0
0
0
0
Off
SPEAKERS
Normal
0
0
0
Off
see page 26
see page 22, 23
2/2
15 S
see page 27-42
21
Adjusting Pos./Size
1
2
3
4
Press to display the Pos./Size menu.
Press to select the menu to adjust.
Pos./Size
Normalise
Auto Setup
Press to adjust the menu.
Press to exit from adjust mode.
H-Pos
H-Size
V-Pos
V-Size
Clock Phase
Dot Clock
1:1 Pixel Mode
Normal
0
0
0
0
0
0
Off
Note:
Unadjustable items are grayed out.
Adjustable items differ
depending on the input signal
and the display mode.
Note:
If a “Cue” or “Rew” signal from a VCR or DVD player is received, the picture position will shift up or down. This picture
position movement cannot be controlled by the Pos./Size function.
AUTO
SETUP
H-Pos/V-Pos, H-Size/V-Size, Dot Clock and Clock Phase are automatically adjusted when the PC signal
is received.
This setting only operates when a PC signal is input, and the aspect is “16:9”.
Using Remote Control
When
on the remote control is pressed, “Auto Setup” will be executed.
When Auto Setup does not work, “Invalid” is displayed.
Notes:
• Auto Setup may not work when a cropped or dark image is input. In such case, switch to a bright image
with borders and other objects are clearly shown, and then try auto setup again.
• Depending on the signal, out of alignment may occur after Auto Setup. Carry out ¿ne tuning for the
position/size as required.
• If Auto Setup cannot set properly for vertical frequency 60Hz XGA signal (1024×768@60Hz and
1366×768@60Hz), pre-selecting the individual signal in “XGA MODE” (see page 39) may results in
correct Auto Setup.
• Auto Setup does not work well when a signal such as additional information is superimposed out of
valid image period or intervals between synchronizing and image signals are short.
• If Auto Setup cannot adjust correctly, select “Normalise” once and press ACTION ( ) then adjust Pos./
Size manually.
• If the picture goes off screen in the horizontal direction as a result of performing Auto Setup, perform
Dot Clock adjustment.
22
Adjusting Pos./Size
H-Pos
Adjust the horizontal position.
V-Pos
Adjust the vertical position.
H-Size
Adjust the horizontal size.
V-Size
Adjust the vertical size.
Clock
Phase
(During PC input signal)
Eliminate the Àickering and distortion.
Dot Clock
(During PC input signal)
Periodic striped pattern interference (noise) may occur when a striped pattern is displayed. If this happens,
adjust so that any such noise is minimized.
Over scan Turn image over scan On/Off.
Con¿gurable signals are as follows:
525i, 525p, 625i, 625p, 750/60p, 750/50p (DVI, HDMI)
On
Off
Notes:
• “Off” is effective during only “16:9” aspect mode.
• When “Off” is set, “H-Size” and “V-Size” cannot be adjusted.
1:1 Pixel
Mode
Adjusts the display size when 1125i or 1125p signal is input.
Notes:
• “On” is effective during only “16:9” aspect mode.
• Select On when you would like to replay 1920 × 1080 input signal.
• Applicable input signal;
1125 (1080) / 50i · 60i · 24psF · 24p · 25p · 30p · 50p · 60p
• Select Off when Àickering is shown around the image.
• H-Size and V-Size cannot be adjusted when On is selected.
Off
Helpful Hint (
On
/
Normalise
Normalisation)
While the Pos. / Size display is active, if either the N button on the remote control is pressed at any time or the ACTION ( ) button is
pressed during “Normalise”, then all adjustment values (except “Clock Phase” and “Dot Clock”) are returned to the factory settings.
23
Picture Adjustments
1
Press to display the Picture menu.
2
Select to adjust each item.
Press to select the menu to adjust.
Select the desired level by looking at the picture behind the menu.
Note:
Menu that cannot be adjusted is grayout. Adjustable menu
changes depending on signal, input and menu setting.
Picture
Normalise
Press the left
Picture Mode
Backlight
Contrast
Brightness
Colour
Sharpness
White balance
Advanced settings
Normal
Dynamic
Normal
For viewing in standard environments.
* In “ENGLISH (US)” OSD language, this is displayed
as “STANDARD”.
Dynamic
For viewing in brighter environments.
Cinema
For use in viewing tone-focused pictures with
brightness reduced.
Normal
Max
Press to enter Advanced
Settings.
Advanced settings
Enables ¿ne picture adjustment at a professional level
(see next page).
Notes:
• If you would like to change the picture and colour of the
selected Picture menu to something else, adjust using
the items in the Picture menu. (see next page)
• In “ENGLISH (US)” OSD language, the “Picture Mode” is
displayed as “PICTURE MENU”.
Press the left
Advanced settings
Normalise
button to switch between modes.
Cinema
100
70
50
50
50
FRAME CREATION
or right
Normal*
Normal
or right
Normal
button to switch between modes.
Warm
Cool
Normal
Input level
Gamma
W/B High R
W/B High G
W/B High B
W/B Low R
W/B Low G
W/B Low B
0
2.2
50
50
50
50
50
50
• In “ENGLISH (US)” OSD language, the “White balance”
is displayed as “COLOR TEMP”.
FRAME CREATION
Improves motion picture quality by reducing motion blur.
Press the left or right button to switch between modes.
Max
Off
Min
Mid
Notes:
• The mode is memorized per input terminal.
• Even if “Normalise” is selected, the Normal setting will
not be restored.
• The picture and menu will disappear for a moment
if you switch the mode to Off, or switch from Off to
another mode.
• “FRAME CREATION” is not available for 42-inch models.
Helpful Hint (
/
Normalise
Normalization)
While the “Picture” menu is displayed, if either the N button on the remote control is pressed at any time or the ACTION
( ) button is pressed during “Normalise”, then all adjustment values are returned to the factory settings.
24
Picture Adjustments
Item
Backlight
Effect
Adjustments
Brighter
Adjusts luminance of the back
light.
More
Selects the proper brightness
and density for the room.
Darker
Brighter
Adjusts for easier viewing of
dark pictures such as night
scenes and black hair.
Less
More
Less
More
Darker
Contrast*
Less
Brightness
Notes:
• You can change the level of each function
(Backlight, Contrast, Brightness, Sharpness)
for each Picture Mode.
• The setting details for normal, dynamic
and cinema respectively are memorized
separately for each input terminal.
• “Backlight” can be adjusted when “ECO
Mode” is set to “Custom” and “Power save”
to “Off”. (see page 32)
Adjusts colour saturation.
Colour
Adjusts picture sharpness.
Sharpness
* In “ENGLISH (US)” OSD language, this is displayed as “PICTURE”.
Advanced settings
Item
Effect
Details
Adjustment of parts which are extremely bright and hard to see.
Input level
Less
More
Down
Up
W/B High
R
Less
More
W/B High
G
Less
More
W/B High
B
Less
More
Less
More
Less
More
Less
More
S Curve
Gamma
2.0
2.2
2.6
Adjusts the white balance for light red areas.
Adjusts the white balance for light green areas.
Adjusts the white balance for light blue areas.
Adjusts the white balance for dark red areas.
W/B Low R
Adjusts the white balance for dark green areas.
W/B Low G
Adjusts the white balance for dark blue areas.
W/B Low B
Notes:
• Carry out “W/B” adjustment as follows.
1. Adjust the white balance of the bright sections using the “W/B High R”, “W/B High G” and “W/B High B” settings.
2. Adjust the white balance of the dark sections using the “W/B Low R”, “W/B Low G” and “W/B Low B” settings.
3. Repeat steps 1 and 2 to adjust.
Steps 1 and 2 affect each other’s settings, so repeat each step in turn to make the adjustment.
• The adjustment values are memorized separately for each input terminal.
• The adjustment range values should be used as an adjustment reference.
Helpful Hint (
/
Normalise
Normalisation)
On the remote control unit, while the “Advanced settings” menu is displayed, if either the N button is pressed at any time or
the ACTION ( ) button is pressed during “Normalise”, then all adjustment values are returned to the factory settings.
25
Sound Adjustment
1
2
Sound
Press to display the SOUND menu.
Normalise
Select to adjust each item.
Press to select the menu to adjust.
Select the desired level by listening to the sound.
3
Output Select
Sound Mode
Bass
Treble
Balance
Surround
Normal
SPEAKERS
Normal
0
0
0
Off
Press to exit from adjust mode.
Item
Details
Output Select
SPEAKERS: Emits sound from the built-in speakers.
AUDIO OUT: Emits sound through the AUDIO OUT terminal.
Sound Mode
Normal: Emits the original sound.
Dynamic: Accentuates sharp sound.
Clear:
Attenuates human voice.
Bass
Adjusts low pitch sounds.
Treble
Adjusts high pitch sounds.
Balance
Surround
Adjusts left and right volumes.
Select On or Off.
Notes:
• When “AUDIO OUT” is selected, the items other than “Balance” cannot be adjusted.
• Bass, Treble and Surround settings are memorized separately for each Sound Mode.
Helpful Hint (
/
Normalise
Normalisation)
While the “Sound” menu is displayed, if either the N button on the remote control is pressed at any time or the
ACTION ( ) button is pressed during “Normalise”, then all adjustment values are returned to the factory settings.
26
PRESENT TIME Setup / Set up TIMER
The timer can switch the Display On or Off.
Before attempting Timer Set, con¿rm the PRESENT TIME and adjust if necessary.
Then set POWER ON Time / POWER OFF Time.
1
2
Press to display the Setup menu.
Setup
MULTI DISPLAY Setup
Set up TIMER
PRESENT TIME Setup
Network Setup
Menu Display Duration
Menu Transparency
20
2/2
15 S
Press to select Set up TIMER or PRESENT TIME Setup.
Press to display the Set up TIMER screen or
PRESENT TIME Setup screen.
PRESENT TIME Setup
1
2
Press to select DAY or PRESENT TIME.
PRESENT TIME Setup
PRESENT TIME MON 99 : 99
Press to setup DAY or PRESENT TIME.
Set
button: Forward
MON
DAY
button: Back
99 : 99
PRESENT TIME
Notes:
• Pressing “ ” or “ ” button once changes PRESENT TIME 1 minute.
• Pressing “ ” or “ ” button continuously changes PRESENT TIME by 15 minutes.
Press to select Set.
Press to store PRESENT TIME Setup.
Notes:
• Set cannot be selected unless PRESENT TIME is set.
• Unless setting the present time other than “99:99”, “DAY” and “PRESENT TIME”
can not be set.
• The settings of “DAY” and “PRESENT TIME” are reset when leaving the display
turned off for about 7 days for the following reasons:
switch of the unit to turn off the display.
Pressing
Disconnecting the AC cord.
Interruption of power supply.
27
PRESENT TIME Setup / Setup TIMER
Set up TIMER
Set the program for turning the power On/Off and select the input signal at the speci¿ed time. Up to 20 programs can be
set.
[Setting Example]
Program 1, Every Monday, 12:00, Power On, Input: HDMI
Set up TIMER
PRESENT TIME MON 0 : 03
1
Program
On
Timer Function
MON
Day
Power Mode
Power On
Time
12 : 00
Input
HDMI
1
Set the program number.
2
To execute the program, set to “On”.
The program is disabled when “Off” is set.
3
Set the day.
The program is executed every day when “Everyday” is set.
1 select
4
Set the power On/Off.
2 adjust
5
Set the time.
Pressing “ ” or “ ” button once changes “Time” 1 minute.
Pressing “ ” or “ ” button continuously changes “Time” by
15 minutes.
6
Set the input.
Notes:
• This function cannot be set unless “PRESENT TIME Setup” is set.
• If more than one programs are set for the same time, only the program with the smallest program number is
enabled.
28
Screensaver (For preventing image retention)
Do not display a still picture, especially in 4:3 mode, for any length of time.
If the display must remain on, a Screensaver should be used.
When the screen saver is operating, the following 5 patterns are displayed full screen for 5 seconds each.
BlackĺDark GrayĺGrayĺLight GrayĺWhite
1
Press to display the Setup menu.
Press to select Screensaver.
2
Press to display Screensaver screen.
Setup
1/2
Signal
Screensaver
Input label
ECO Mode settings
Wobbling
YUV/RGB-in select
Off
RGB
No activity power off
OSD Language
Disable
English(UK)
Screensaver
PRESENT TIME
MON 0 : 02
Start
Mode
3
Mode selection
Press to select Mode.
Press to select each
mode items.
4
Off
Off
Interval
: Operates when Periodic Time and Operating
Time are setup and those times arrive.
Time Designation : Operates when Start Time and Finish
Time are setup and those times arrive.
Standby after SCR Saver: Operates while Screensaver duration, and
display enters standby mode.
On
: Operates when Start is selected and the
ACTION ( ) button is pressed.
Start setting
When the Mode is set to On, press to select Start.
Press to start Screensaver.
The menu screen will disappear and the Screensaver will be activated. To stop the
Screensaver under On, press the R button or any buttons on the main unit.
Note: When the display is turned off, the Scrensaver will be deactivated.
29
Screensaver (For preventing image retention)
Setup of Screensaver Time
After selecting Time Designation, Interval or Standby after SCR Saver, the relevant Time Setup will become available
for selection and the Operating Time may be set. (Time cannot be set when “Mode” is “On” or “Off”.)
Press to select Start Time / Finish Time
(When Time Designation is selected).
Press to select Periodic Time / Operating Time
(When Interval is selected).
Press to select Screensaver duration
(When Standby after SCR Saver is selected).
Press to setup.
button: Forward
button: Back
Notes:
• Pressing “ ” or “ ” button once changes the Time 1 minute.
[However, switching occurs every 15 minutes when Periodic Time is selected.]
• Pressing “ ” or “ ” button continuously changes the Time by 15 minutes.
• “Screensaver duration” of the “Standby after SCR Saver” can be set from 0:00 to
23:59. When this is set to “0:00”, “ Standby after SCR Saver” will not be activated.
Screensaver
PRESENT TIME MON 15 : 00
Start
Time Designation
Mode
6 : 15
Start Time
12 : 30
Finish Time
Screensaver
PRESENT TIME MON 15 : 00
Start
Interval
Mode
12 : 00
Periodic Time
3 : 00
Operating Time
Screensaver
PRESENT TIME MON 15 : 00
Start
Standby after SCR Saver
Mode
6 : 15
Screensaver duration
Note: Timer function will not work unless “PRESENT TIME” is set.
Wobbling
Automatically shifts the display image (therefore unnoticeable to the eye) to prevent image retention of sharper contour
of image.
1
2
Press to display the Setup menu.
Press to select “Wobbling”.
Press to select “On” or “Off”.
On: Shifts the position of the display image on a ¿xed time
interval.
Setup
Signal
Screensaver
Input label
ECO Mode settings
Wobbling
YUV/RGB-in select
1/2
Off
RGB
No activity power off
3
Press to exit from adjust mode.
Notes:
• If “MULTI DISPLAY Setup” is set to “On”, this function does not operate.
• When this function is operating, part of the screen may appear to be missing.
30
OSD Language
Disable
English(UK)
No activity power off
1
Press to select the menu to adjust.
Setup
1/2
Signal
Screensaver
Input label
ECO Mode settings
Wobbling
YUV/RGB-in select
Off
RGB
2
3
Press to select “Enable” or “Disable”.
No activity power off
OSD Language
Disable
English(UK)
Press to exit from Setup.
When this function is set to “Enable”, the power is turned off (standby) automatically when there is no operation of
the Display for 4 hours.
Starting from 3 minutes before the turn off, the remaining time will be displayed.
Press any key to abort.
No activity power off 3min
When the power is turned off due to this function, a message “Last turn off due to ’No activity power off’.” is
displayed next time the power is turned on.
Note:
During the screensaver is running, this function is disabled.
31
ECO Mode settings
ECO Mode settings
ECO Mode
Press
, select “ECO Mode settings” in
Custom
1 select
No signal power off
2 adjust
Enable
“Setup” menu and press
button.
HDMI1 Power management
Off
HDMI2 Power management
Off
PC Power management
On
DVI-D Power management
Off
Off
Power save
ECO Mode
Off
Custom: The menu of power consumption reduction is individually set.
On: The following ¿xed values are set to the menu of power consumption reduction. Individual setting is not available.
No Signal power off: Enable
PC Power management: On
DVI-D Power management: On
Power save: Sensor
Using Remote Control
When
is pressed, the “ECO Mode” setting
ECO Mode
On
changes.
Custom settings
The menu of the power consumption reduction is individually set. This setting is enabled when “ECO Mode” is set
to “Custom”.
No signal power off
Equipment power supply is turned Off when there is no signal.
When this is set to “Enable”, the power supply of the unit goes Off 10 minutes after the input signals stop.
HDMI1 Power management, HDMI2 Power management
When this function is set to On, it operates under the following conditions to turn the power on or off automatically.
When no pictures (sync signal) are detected for 30 or so seconds during HDMI1 or HDMI2 signal input:
ĺ Power is turned off (standby); the power indicator lights up orange.
When pictures (sync signal) are subsequently detected:
ĺ Power is turned on; the power indicator lights up green.
Notes:
• This function operates only during input from HDMI IN terminal.
• When the power indicator lights up orange, approx. 0.7 W of power is being consumed.
PC Power management
When this function is set to On, it operates under the following conditions to turn the power on or off automatically.
When no pictures are detected for 30 or so seconds during PC signal input:
ĺ Power is turned off (standby); the power indicator lights up orange.
When pictures are subsequently detected:
ĺ Power is turned on; the power indicator lights up green.
Notes:
• This function operates only during input from PC IN terminal.
• This function is effective when “Sync” is set to “Auto” and during normal viewing.
DVI-D Power management
When this function is set to On, it operates under the following conditions to turn the power on or off automatically.
When no pictures (sync signal) are detected for 30 or so seconds during DVI signal input:
ĺ Power is turned off (standby); the power indicator lights up orange.
When pictures (sync signal) are subsequently detected:
ĺ Power is turned on; the power indicator lights up green.
Notes:
• This function operates only during DVI signal input.
• When the power indicator lights up orange, approx. 0.7 W of power is being consumed.
Power save
This function adjusts the brightness of the backlight to reduce power consumption.
Off: This function does not operate.
On: Backlight brightness is reduced.
Sensor: The backlight brightness is automatically adjusted according to the viewing environment.
Note:
When this function is set to “On” or “Sensor”, the “Backlight” setting in the Picture menu is disabled.
32
Customizing the Input labels
This function can change the label of the Input signal to be displayed. (see page 16)
1
2
Setup
Press to display the Setup menu.
Press to select Input label.
Press to display the Input label screen.
Signal
Screensaver
Input label
ECO Mode settings
Wobbling
YUV/RGB-in select
1/2
Off
RGB
No activity power off
OSD Language
3
Disable
English(UK)
Press to select image input.
Press to change input label.
Input label
PC
DVI
HDMI1
HDMI2
Image input
[PC]
[DVI]
[HDMI1]
[HDMI2]
PC
DVI
HDMI1
HDMI2
Input label
PC / DVD1 / DVD2 / DVD3 / Blu-ray1 / Blu-ray2 / Blu-ray3 / CATV / VCR / STB / (Skip)
DVI / DVD1 / DVD2 / DVD3 / Blu-ray1 / Blu-ray2 / Blu-ray3 / CATV / VCR / STB / (Skip)
HDMI1 / DVD1 / DVD2 / DVD3 / Blu-ray1 / Blu-ray2 / Blu-ray3 / CATV / VCR / STB / (Skip)
HDMI2 / DVD1 / DVD2 / DVD3 / Blu-ray1 / Blu-ray2 / Blu-ray3 / CATV / VCR / STB / (Skip)
(Skip): The INPUT button press will skip its input.
33
Selecting the On-Screen Menu Language
1
2
Press to display the Setup menu.
Press to select the OSD Language.
Press to select your preferred language.
Selectable languages
English (UK)
Deutsch
Français
Italiano
Español
Setup
1/2
Signal
Screensaver
Input label
ECO Mode settings
Wobbling
YUV/RGB-in select
Off
RGB
No activity power off
OSD Language
Disable
English(UK)
ENGLISH (US)
......(Chinese)
.......(Japanese)
Ɋɭɫɫɤɢɣ.......(Russian)
Customizing the On-Screen Menu Display
Set the display time and background transparency of the on-screen menu display.
1
2
Press to display the Setup menu.
Press to select “Menu Display Duration”.
Press to adjust the display duration.
3
Press to select “Menu Transparency”.
Press to adjust the transparency.
4
34
Press to exit from adjust mode.
Menu Display Duration
Menu Transparency
15 S
20
Setup for MULTI DISPLAY
By lining up the Displays in groups, for example, as illustrated below, an enlarged picture may be displayed across
all screens.
For this mode of operation, each display has to be set up with a Display number to determine its location.
(Example)
group of 4 (2 × 2) group of 9 (3 × 3)
group of 16 (4 × 4)
group of 25 (5 × 5)
How to Setup MULTI DISPLAY
1
Setup
Press to display the Setup menu.
Press to select the MULTI DISPLAY Setup.
2
MULTI DISPLAY Setup
Set up TIMER
PRESENT TIME Setup
Network Setup
Menu Display Duration
Menu Transparency
Press to display the “MULTI DISPLAY Setup” menu.
Press to select the MULTI DISPLAY Setup.
3
Item
MULTI DISPLAY Setup
15 S
20
MULTI DISPLAY Setup
MULTI DISPLAY Setup
Horizontal Scale
Vertical Scale
Bezel H Adjustment
Bezel V Adjustment
Location
Press to select “On” or “Off”.
2/2
Off
1
1
10
10
A1
Details
Select “On” or “Off”.
Horizontal Scale
Select “1”, “2”, “3”, “4”, “5”.
Vertical Scale
Select “1”, “2”, “3”, “4”, “5”.
Areas of the image that are hidden by the joint sections are adjusted both horizontally and
vertically (0~100).
To show joints between displays.
To hide joints between displays.
Suitable for still image display.
Suitable for moving image display.
Setting value: 0
Setting value: 100
Bezel H Adjustment
Bezel V Adjustment
35
Setup for MULTI DISPLAY
Item
Details
Select the required arrangement number. (A1-E5 : Refer to the following)
Display Number locations for each arrangement.
(Examples)
( 2 × 1) ( 2 × 3 )
(4×2)
(4×4)
(5×5)
Location
4
A1
A2
A3
A4
B1
B2
B3
B4
A5
B5
C1
C2
C3
C4
C5
D1
D2
D3
D4
D5
E1
E2
E3
E4
E5
Press to exit from adjust mode.
ID Remote Control Function
You can set the remote control ID when you want to use this remote control on one of several different displays.
Note:
To operate this function, please purchase ID remote controller sold separately.
Object model : EUR7636090R (Europe)
EUR7636070R (Other countries)
1
2
3
4
Switch
to
on the right side.
Press the
button on the remote control.
Press one of
-
,
for the tens digit setting.
Press one of
-
,
for the units digit setting.
Notes:
• The numbers in 2, 3 and 4 should be set up quickly.
• Adjustable ID number range is 0 - 99.
• If a number button is pressed more than two times, the ¿rst two numbers become the ID number
for the remote control.
ID remote control button operation
The operation is the same as normal remote control except for the
button.
ID Cancellation
Press
button on remote control. (This has the same effect as pressing the
,
,
buttons at the same time.)
Notes:
• Set the Remote ID “On” to operate the ID remote control.
If Remote ID is set to “On”, you can use the remote control without identical ID number during option menu display.
(see page 44)
• The ID remote control cannot be used when ID select is set to anything other than 0, and the remote control ID is
not the same as the ID select number (see page 44).
36
Setup for Input Signals
YUV / RGB-IN select
Select to match the signals from the source connected to DVI-D IN terminal.
YUV signals
“YUV”
“RGB”
RGB signals
1
2
Setup
1/2
Press to display the Setup menu.
Press to select the “YUV/RGB-in select”.
Press to select the desired mode.
RGB
YUV
Signal
Screensaver
Input label
ECO Mode settings
Wobbling
YUV/RGB-in select
Off
RGB
No activity power off
OSD Language
3
Disable
English (UK)
Press to exit from adjust mode.
37
Setup for Input Signals
Signal menu
Note:
“Signal” setup menu displays a different setting condition for each input signal.
Setup
1
2
Press to display the Setup menu.
Press to select the “Signal”.
1/2
Signal
Screensaver
Input label
ECO Mode settings
Wobbling
YUV/RGB-in select
Off
RGB
No activity power off
Press to display the Signal menu.
OSD Language
Disable
English (UK)
Press ACTION ( ) button
3
Press to select the menu to adjust.
Press to adjust the menu.
For RGB
Sync
Cinema reality
XGA Mode
4
[ RGB ]
Signal
Auto
Off
1024×768
H-Freq. 63.98 kHz
V-Freq. 60.02 Hz
Signal Format 1280×1024/60
Press to exit from adjust mode.
For Digital
[ Digital ]
Signal
Cinema reality
HDMI Range
H-Freq.
V-Freq.
Dot Clock Freq.
Signal Format
Off
Auto
63.98 kHz
60.02 Hz
108.0 MHz
1280×1024/60
Cinema reality
Cinema reality:
When on, the display attempts to reproduce a more natural interpretation of sources such as movie pictures, which
are recorded at 24 frames per second. If the picture is not stable, turn the setting to off.
Press to select Cinema reality.
Press to set On / Off.
38
Cinema reality
Off
Setup for Input Signals
XGA Mode
This menu is displayed when the input signal is analog. This menu sets two types of XGA signals with 60Hz vertical
frequency having different aspect ratios and sampling rates (1,024 × 768 @ 60Hz and 1,366 × 768 @ 60Hz).
When a 1,280 x 768 @ 60Hz input signal is automatically detected, the image is processed as a 1,280 x 768 @
60Hz XGA input signal irrespective of this setting.
Press to select “XGA Mode”.
y
XGA Mode
1024 × 768
Press to select “1024×768”, “1366×768”.
Note:
After making this setting, be sure to make each adjustment (such as “Auto Setup”) on the “Pos. /Size” menu as
necessary. (see page 22)
Sync
This function operates only during input from PC IN terminal.
Press to select the “Sync”.
Signal
[ RGB ]
Press to adjust.
Sync
Cinema reality
XGA Mode
Auto
Off
1024×768
Con¿rm that the input is set to RGB input (this setting is valid only for RGB input signal).
Auto: The H and V sync or synchronized signal is automatically selected. If both input, it is selected the H and V sync.
However, the synchronized signal that is input ¿rst is selected.
on G: Uses a synchronized signal on the Video G signal, which is input from the G connector.
39
Setup for Input Signals
HDMI Range
Switches the dynamic range according to the input signal from HDMI terminal.
Press to select “HDMI Range”.
Press to select “Video(16-235)”, “Full(0-255)”, “Auto”.
[ Digital ]
Signal
Cinema reality
HDMI Range
Off
Auto
Video(16-235): If the input signal is the video range, Example: HDMI terminal output for DVD player
Full(0-255): If the input signal is full range, Example: HDMI terminal output for personal computer
Auto: Switches the dynamic range automatically between “Video(16-235)” and “Full(0-255)” according to the input signal.
Note:
This function can be set to the HDMI signal.
Input signal display
Displays the frequency and the type of the current input signal.
Display range(PC input signal):
Horizontal 30 - 110 kHz
Vertical
48 - 120 Hz
The dot clock frequency is displayed during digital signal input.
Note:
The automatically detected signal format may be displayed differently than the
actual input signal.
40
H-Freq.
V-Freq.
Signal Format
H-Freq.
V-Freq.
Dot Clock Freq.
Signal Format
63.98 kHz
60.02 Hz
1280×1024/60
63.98
kHz
60.02 Hz
108.0 MHz
1280×1024/60
Network Setup
Con¿gure the various settings required to use the network function.
Setup
MULTI DISPLAY Setup
Set up TIMER
PRESENT TIME Setup
Network Setup
Menu Display Duration
Menu Transparency
1/2
Network Setup
2/2
Press
Control I/F Select
RS-232C
2/2
Network Setup
AMX D.D.
Crestron Connected™
Off
Off
Display name
LFE7-00
15 S
LAN Setup
20
Control I/F Select
Set whether to control with RS-232C or LAN. When “LAN” is set, power indicator lights orange under the
condition of power off with remote control (stand-by state).
Note:
When the power indicator lights up orange, 6 W of power is being consumed.
Display Name
The name of the Display that is shown on the network can be changed.
LAN Setup
See page 42
AMX D.D.
This function allows the Display to be detected by AMX Device Discovery. For more details, visit the following
website.
http://www.amx.com/
Crestron Connected™
When this function is set to on, the Display can be monitored or controlled via the network using equipment and
application software of Crestron Electronics, Inc.
This Display supports the following application software from Crestron Electronics, Inc.
®
Ɣ RoomView Express
®
Ɣ Fusion RV
®
Ɣ RoomView Server Edition
[Crestron Connected™] is a function to connect to a system developed by Crestron Electronics, Inc. which
manages and controls multiple system devices connected to the network.
• For details of “Crestron Connected™”, refer to the Crestron Electronics, Inc. website (Provided only in English).
http://www.crestron.com/
For the download of “RoomView® Express”, refer to the Crestron Electronics, Inc. website (Provided only in
English).
http://www.crestron.com/getroomview
41
Network Setup
LAN Setup
Detailed network settings for the LAN established via the LAN terminal of the Display or twisted pair cable
transmitter can be con¿gured.
Select “LAN Setup” and press
.
DHCP, IP address, Subnet mask, and Gateway settings
1 Set DHCP.
When “Off” is selected, IP address and other settings can be set
manually.
2 Select the item and press
3 Enter an address.
LAN Setup
Save
DHCP
IP address
Subnet mask
Gateway
Port
DUPLEX
Network ID
MAC Address
Off
192.168. 0. 8
255.255.255. 0
192.168. 0. 1
1024
Auto
0
--:--:--:--:--:--
IP address
192.168.
I
0.
1
2
3
8
.
Use
Use
Press
to select a digit.
to change a number.
.
Pressing
4 Select “Save” and press
will cancel the address change.
.
Port setting
1 Select “Port” and press
2 Enter a port number.
Port
1
2
3
01024
I
.
Use
Use
Press
Pressing
to select a digit.
to change a number.
.
will cancel the port number change.
Save
Save the current network Setup. Each value set for
DHCP, IP address, Subnet mask, and Gateway will be
saved. If “NG” is displayed, check the same IP address
is not used within the same network.
Port
Set the port number used for command control.
The available setting range is 1024 – 65535.
When the PJLink™ protocol is used, the port setting is
not necessary.
DHCP (DHCP client function)
To obtain an IP address automatically using a DHCP
server, set this to “On”. If DHCP server is not used, set
this to “Off”.
DUPLEX
Set the connection speed of the LAN environment.
Select the value from Auto, 10 HALF, 10 FULL,100 HALF
or 100 FULL.
IP address (IP address display and setting)
Enter an IP address if DHCP server is not used.
Network ID
Set the ID to identify this unit.
The available setting range is 0 – 99.
Subnet mask (Subnet mask display and setting)
Enter a subnet mask if DHCP server is not used.
Gateway (Gateway address display and setting)
Enter a gateway address if DHCP server is not used.
MAC Address
Display the MAC address of this unit. However, the MAC
address is not displayed when the “Control I/F Select” is
set to “RS-232C”.
Notes:
• To use a DHCP server, make sure the DHCP server is started.
• Contact your network administrator for details on settings.
42
Options Adjustments
1
Options
Press to display the SET UP menu.
Input Search
On screen display
Initial input
Initial VOL level
Maximum VOL level
Input lock
Button lock
Remocon User level
5V Charge
Press to select “OSD Language”.
2
Press for more than 3 seconds.
Press to select “Options”.
3
Options
Display Serial Number
Shipping
Press to display the Options menu.
Press to select your preferred menu.
4
Press to adjust the menu.
5
1/3
On
Off
Off
0
Off
0
Off
Off
Off
On
Options
2/3
Off-timer function
Enable
Normal
Initial Power Mode
0
ID select
Off
Remote ID
Off
Serial ID
Off
Studio W/B
Protocol 1
LAN Control Protocol
RS-232C/LAN Information Timing
Options
3/3
Off
Power ON Screen Delay
Clock Display
Off
Power On Message (No activity power off)
On
Function button assign 1
Signal
Function button assign 2
Screensaver
Power Switch Lock
Off
Press to exit from Options menu.
• The serial number of this device is displayed when “Display Serial Number” is selected in step 3.
Item
Input Search
On screen display
Initial input
Adjustments
Set auto input switching for when there is no signal. (see page 45)
On: Displays all the following on screen.
• Power on display
• Input signal switch display
• No signal display
was pressed.
• Mute and the remaining time of off-timer after
Off: Hides all the items above from view.
Adjusts the input signal when the unit is turned on.
PC
DVI
HDMI1
HDMI2
Off
Notes:
• Only the adjusted signal is displayed. (see page 16)
• This menu is available only when “Input lock” is “Off”.
Initial VOL level
button to adjust the volume when the unit is turned on.
Press
On
Off
Off: Sets normal volume.
On: Sets your preferred volume.
Notes:
• When “Maximum VOL level” is “On”, the volume can only be adjusted between 0 and your maximum
range.
• You can hear the changed volume regardless of your volume setting before opening the options menu
if you adjust the volume when “Initial VOL level” is “On” and cursor is on the menu.
Maximum VOL level
button to adjust the maximum volume.
Press
Off
On
Off: Sets auto maximum volume.
On: Sets your preferred maximum volume.
Notes:
• If the “Maximum VOL level” is set lower than the “Initial VOL level”, the “Initial VOL level” automatically
becomes the same as the “Maximum VOL level”.
• The volume display can go up to 100 regardless of the settings.
• You can hear the changed volume regardless of your volume setting before opening the options menu
if you adjust the volume when “Maximum VOL level” is “On” and cursor is on the menu.
Input lock
Locks the input switch operation.
PC
DVI
HDMI1
HDMI2
Off
Notes:
• Only the adjusted signal is displayed (see page 16).
• Input switch can be used when this is set to “Off”.
43
Options Adjustments
Item
Adjustments
Off
On
MENU&ENTER
Off: All the buttons on main unit can be used.
MENU&ENTER: Locks
Button lock
MENU
and
ENTER/
buttons on main unit.
On: Locks all the button on main unit except the Power switch.
Sets Button lock with the unit buttons in the following procedure.
Off: Press
four timesĺPress
INPUT
four timesĺPress
four timesĺPress
ENTER/
MENU&ENTER: Press
On: Press
Remocon User level
ENTER/
INPUT
four timesĺPress
four timesĺPress
ENTER/
four timesĺPress
four timesĺPress
four timesĺPress
four timesĺPress
ENTER/
ENTER/
Off
User1
User2
User3
Off: You can use all of the buttons on the remote control.
buttons on the remote control.
User1: You can only use , , , ,
User2: You can only use
button on the remote control.
User3: Locks all the buttons on remote control.
5V Charge
(CHARGE terminal
power supply
setting)
Off-timer function
Initial Power Mode
ID select
Remote ID
Serial ID
Studio W/B
LAN Control
Protocol
RS-232C/LAN
Information Timing
Power ON Screen
Delay
Power On Message
(No activity power
off)
Clock Display
Sets the power supply from the CHARGE terminal.
On: Supplies power when the power of the display is on.
Off: Supplies no power.
Note: Power will not be supplied in standby mode even if “5V Charge” is set to “On”.
Enable: Enables the “Off-timer function”.
Disable: Disables the “Off-timer function”.
Note:
When “Disable” is set, the Off-timer is cancelled.
Normal
On
Standby
Sets the power mode of the unit for when the power recovers from failure or after plugging off and in again.
Normal: Power returns in as the same state as before the power interruption.
Standby: Power returns in standby mode. (Power Indicator : red/orange)
On:
Power returns in power On. (Power Indicator : green)
Note: When using multiple displays, “Standby” is preferred to be set in order to reduce a power load.
Sets panel ID number when panel is used in “Remote ID” or “Serial ID”.
Set value range: 0 - 100
(Standard value: 0)
The setting of this menu is valid only when using ID remote control.
Off: Disables ID remote control functions. You can use normal remote control operations.
On: Enable ID remote control functions.
Note: To use the ID remote control function, it is necessary to set each ID number of remote control and
display unit. About the setting method, please refer to “ID Remote Control Function” (see page
36) and “ID select” (above-mentioned).
Sets the panel ID Control.
Off: Disables external control by the ID.
On: Enables the external control by the ID.
Off: Nullify all the settings adjusted.
On: Sets the colour temperature for TV studio.
Note: Valid only when the “Warm” is set as “White balance” in Picture menu.
Select the LAN control protocol.
Protocol 1: Control with the Panasonic Display sequence.
Protocol 2: Control with the sequence that compatible with Panasonic Projector.
Set up the informing manner if error warning occurred. (see page 46)
Off
1
2
3....
30
You can set the power-on delay time of the displays to reduce the power load, when you press
to
turn on the multiple displays that are set together, for example, on MULTI DISPLAY system.
Set each display’s setting individually.
Off:
The display will be turned on at the same time as
is pressed.
1 to 30 (sec.): Set the power-on delay time (second).
After pressing
, the display will be powered on with time delay depending on this setting.
Notes:
• During this function is working, the power indicator is blinking green.
• This function also works when the power recovers from failure or after plugging off and in again the power cord.
Whether to show/hide No activity power off Precautions at the time of power ON is set.
On: The warning precautions are shown at the time of power ON.
Off: The warning precautions are not shown at the time of power ON.
Note:
This setting is enabled only if “No activity power off” is “Enable” (see page 31).
Off: Not display the clock.
On: Display the clock.
The clock is displayed at the lower left of the screen when
button is pressed.
Note: When “PRESENT TIME Setup” is not set, the clock is not displayed even
if “Clock Display” is “On”. (see page 27)
10:00
44
Options Adjustments
Item
Adjustments
Set the functions that operates when
is pressed.
Signal: The “SIGNAL” menu is displayed.
Screensaver: The “SCREENSAVER” menu is displayed.
ECO menu: The “ECO MODE SETTINGS” menu is displayed.
Set up TIMER: The “Set up TIMER” menu is displayed.
Note:
Factory settings are as follows.
FUNCTION1 button: Signal
FUNCTION2 button: Screensaver
Function button assign 1
Use the FUNCTION button
Function button assign 2
The menu screen is displayed. (Example: Signal)
[ Digital ]
Signal
Cinema reality
HDMI Range
H-Freq.
V-Freq.
Dot Clock Freq.
Signal Format
Off
Auto
63.98 kHz
60.02 Hz
108.0 MHz
1280×1024/60
Press the FUNCTION button to exit from the menu.
Power Switch Lock
Sets the lock setting for the display Power switch.
On: Power switch operation is disabled.
Off: Power switch operation is enabled.
Note: This function is only for TH-42LFE7U, TH-50LFE7U, TH-65LFE7U.
Normalisation
When both main unit buttons and remote control are disabled due to the “Button lock”, “Remocon User level” or
“Remote ID” adjustments, set all the values “Off” so that all the buttons are enabled again.
Press the
button on main unit together with
button on the remote control and hold for more than 5 seconds. The
“Shipping” menu is displayed and the lock is released when it disappears.
Input Search
When a signal is not detected, another input with a signal is automatically selected.
Options
Input Search
On screen display
Initial input
1 select
Input Search
1/3
Press ACTION ( ) button
On
Off
Input Search
Primary Input
Secondary Input
Off
2 adjust
Input Search
Off: When there is no signal, the input is not switched automatically.
All Inputs: Searches all inputs and switches to an input with a signal.
Priority: Searches “Primary Input” and “Secondary Input” in order and switches to an input with a signal.
Searching...
“Searching...” is displayed during the input search.
Primary Input, Secondary Input
Set the input to search when “Priority” is selected.
PC
DVI
HDMI1
HDMI2
(NONE)
Note:
This menu is available only when “Input lock” is “Off”. (see page 43)
45
Options Adjustments
RS-232C/LAN Information Timing
Set up the informing manner for no signal or temperature rising.
While RS-232C controls: Warning or error message sent on the display automatically.
While LAN controls: Acquire the warning or error message from the display.
Options
Off-timer function
Initial Power Mode
ID select
Remote ID
Serial ID
Studio W/B
LAN Control Protocol
RS-232C/LAN Information Timing
RS-232C/LAN Information Timing
2/3
Enable
Normal
0
Press ACTION ( ) button
Off
No Signal Warning
No Signal Warning Timing
On
5min
No Signal Error
No Signal Error Timing
10min
1 select
2 adjust
On
Off
Off
Protocol 1
Temperature Warning
Temperature Warning Value
Temperature Warning Release Value
On
55°C
52°C
No Signal Warning
If set to “On”, the display sends out the no signal warning.
No Signal Warning Timing
Set up the detecting time for no signal warning.
No Signal Error
If set to “On”, the display sends out the no signal error.
No Signal Error Timing
Set up the detecting time for no signal error.
The warning of “No Signal Warning” and the error of “No Signal Error” are not sent when the no signal state is
detected through any of the following functions:
No Signal power off: Enable, PC Power management, DVI-D Power management, HDMI1 Power management,
HDMI2 Power management (see page 32)
Setting Example
No Signal Warning Timing: 5 minutes
No Signal Error Timing: 10 minutes
PC Power management: On (30 seconds)
If there is no signal when PC IN is input, “PC Power management” is activated ¿rst and the Display enters the standby
mode.
Note:
The “No Signal Error Timing” cannot be set shorter than “No Signal Warning Timing”.
Temperature Warning
If set to “On”, the display sends out the warning temperature.
Temperature Warning Value
Set up the detecting temperature for temperature warning.
Temperature Warning Release Value
Set up the temperature to release the temperature warning.
46
Using Network Function
Network Connection
This unit has a network function to control the network connected display with your computer.
Note:
To use the network function, set each “Network Setup” setting and make sure to set the “Control I/F Select” to “LAN”.
(see page 41)
When “LAN” is set, power indicator lights orange under the condition of power “Off” with remote control (stand-by
state).
Example of network connection
COMPUTER
LAN cable
Display (main unit, rear)
(Shielded)
ȵ Use the
Shielded Twist
Pair (STP) LAN
cable.
Hub or broadband router
Notes:
• Make sure the broadband router or hub supports 10BASE-T/100BASE-TX.
• Use a LAN cable that is compliant with “CAT5” when connecting a device that supports 100BASE-TX.
• For instructions on how to connect, consult your network administrator.
47
Using Network Function
Command Control
Network function of the unit can control the unit in the same way as serial control from a network.
Supported commands
Commands used in the serial control are supported. (see page 12)
Note:
Consult your local Panasonic dealer for detail instructions on command usage.
PJLink™ Protocol
The network function of the unit conforms with PJLink™ class 1 and you can operate the following actions from your
computer using PJLink™ protocol.
• Display setup
• Display status query
Supported commands
Commands to control the unit with PJLink™ protocol are shown in the table below.
Command
Control
POWR
Power control
POWR ?
Power status query
INPT
INPT ?
AVMT
Input switch
Input switch query
Shutter control
AVMT ?
Shutter control query
ERST ?
Error status query
LAMP ?
INST ?
Lamp status query
Input switch list query
NAME ?
INF1 ?
INF2 ?
INFO ?
CLSS ?
Projector name query
Manufacturer name query
Model name query
Other information query
Class information query
Remark
Parameter
0 = Standby 1 = Power “On”
Parameter
0 = Standby 1 = Power “On”
Parameter
See the parameter for command INST ?
Parameter
10 = Picture On (picture mute deactivated), 11 = Picture Off (picture on mute)
20 = Audio On (audio mute deactivated), 21 = Audio Off (audio on mute)
30 = Shutter mode Off (picture and audio mute deactivated)
31 = Shutter mode On (picture and audio on mute)
Parameter
11 = Picture Off (picture on mute)
21 = Audio Off (audio on mute)
30 = Shutter mode Off (picture and audio mute deactivated)
31 = Shutter mode On (picture and audio on mute)
Parameter
First byte: 0
Second byte: 0
Third byte: 0
Fourth byte: 0
Fifth byte: 0
Sixth byte: Means other error. 0 or 2.
Meaning of the 0 – 2 settings:
0 = Error is not detected, 2 = Error
Not supported
Parameter
11: PC IN input (PC)
31: HDMI1 input (HDMI1)
32: HDMI2 input (HDMI2)
32: DVI-D IN input (DVI)
Return the Display name contents selected in “Network Setup”.
Returns “Panasonic”
Returns “65LFE7U”/“65LFE7E” (for 65-inch model)
Returns version number
Returns “1”
PJLink™ security authentication
Set “panasonic” for the PJLink™ password.
• PJLink™ is a pending trademark in Japan, the United States, and other countries or areas.
48
Using Web Browser Control
You can use a Web browser to control the unit and set up a network and password.
Before Using Web Browser Control
To use the Web browser control, the unit and computer setups are required.
Unit Setup
Set each “Network Setup” setting and make sure to set the “Control I/F Select” to “LAN”. (see page 41, 42)
Computer Setup
Disable the proxy server settings and enable JavaScript.
(Windows)
Disable proxy server settings
1 Display [Internet Properties] window.
Click [Start] – [Control Panel] – [Network and Internet]
– [Internet Options].
2 Click the [Connections] tab and then [LAN Settings].
3 Deselect the [Use automatic con¿guration script] and
[Use a proxy server for your LAN] boxes.
4 Click [OK].
Enable JavaScript
1 Display [Internet Properties] window.
Click [Start] – [Control Panel] – [Network and Internet]
– [Internet Options].
2 Set the security level on the [Security] tab to [Default
Level]. Alternatively enable [Active scripting] from the
[Custom Level] button.
(Macintosh)
Disable proxy server settings
1 From the [Safari] menu, click [Preferences].
General screen is displayed.
2 From the [Advanced] tab, click the [Change
Settings…] button next to [Proxies]. Click [Proxies]
and set up a proxy server.
3 Deselect the [Web Proxy] and [Automatic Proxy
Con¿guration] boxes.
4 Click [Apply Now].
Enable JavaScript
1 Display [Security] of Safari.
2 Select [Enable JavaScript] under [Web content].
Access from Web Browser
Access to the TOP screen of the Web browser control using a Web browser.
1 Start your Web browser.
2 Enter the IP address set with the “LAN Setup” of the unit.
(see page 42)
3 Enter the user name and password when the
Authentication screen is displayed.
Authentication screen
Notes:
The password used here is the same password
used for command control and the PJLink™
security authentication.
Ɣ Default user name and password are as follows:
User name: user1
Password: panasonic
Ɣ The password can be changed on the Password
Setup screen after logging in (see page 51). The
user name cannot be changed.
Ɣ Under no circumstances, Panasonic Corporation
or it's associated companies will ask customers
their password directly.
Even if you are asked directly, please do not
reveal your password.
Ɣ
4 Click [OK].
After logged in, the TOP screen of the Web browser
control is displayed. (see page 50)
49
Using Web Browser Control
TOP screen structure of the Web browser control
After logging in, the TOP screen of the Web browser control is displayed.
Menu
Menu items are displayed. When a button is clicked,
setup screen of each item is displayed.
Item
BASIC
CONTROL
OPTION
CONTROL
NETWORK
SETTING
CHANGE
PASSWORD
Crestron
Connected™
Details
BASIC CONTROL screen is displayed.
(see below)
OPTION CONTROL screen is
displayed. (see below)
Network Setup screen is displayed.
(see page 51)
Password setup screen is displayed.
(see page 51)
The Crestron Connected™ operations
screen will appear. (see pages 52, 53)
Ɣ This button does not appear when
“Crestron Connected™” in “Network
Setup” is “OFF”. (see page 41)
According to the selected item from the menu, setup
status or set items are displayed.
Network ID information
ID to identify the unit is displayed.
Display Control (BASIC CONTROL/OPTION CONTROL Screen)
Click BASIC CONTROL or OPTION CONTROL from the menu. Various controls of the unit can be set.
BASIC CONTROL screen
OPTION CONTROL screen
Click BASIC CONTROL from the menu. Unit status and
buttons to change settings are displayed.
Click OPTION CONTROL from the menu. Command input
¿eld for command control of the unit is displayed.
Item
COMMAND
Item
POWER
Details
Switch ON/OFF of the unit power.
Switch the input signals. Displayed
buttons vary according to the
INPUT SELECT
connection status of the video
device.
AUDIO MUTE Switch ON/OFF of the sound mute.
ASPECT
Switch the screen modes
50
RESPONSE
SEND
Details
Enter a command. Use the same
command used for the serial control.
(see page 12)
Response from the unit is displayed.
Command is sent and run.
Note:
After the settings are changed, it may take a while till
the display’s response is displayed.
Using Web Browser Control
NETWORK SETTING (NETWORK SETTING Screen)
Click NETWORK SETTING from the menu. Various settings of a network can be set. For the details of the setting
items, please check LAN Setup under the Network Setup of the unit. (see page 42)
Item
Notes:
• To use a DHCP server, make sure the DHCP server
is started.
• During a DHCP server is used, IP ADDRESS,
SUBNET MASK, and GATEWAY values cannot be
entered.
• When the set values are changed properly,
“NETWORK SETTING CHANGED.” message and
the changed set items are displayed.
Details
Set to ON when a DHCP server is
DHCP
used, or OFF when it is not used.
IP ADDRESS
Enter an IP address.
SUBNET MASK Enter a subnet mask.
GATEWAY
Enter a gateway address.
Enter the port number used for
PORT
command control. The available
setting range is 1024 - 65535.
Set the connection speed of the LAN
LAN SPEED
environment.
Set the ID to identify this unit. The
NETWORK ID
available setting range is 0 - 99.
SAVE
Save the each set value.
Password Setting (CHANGE PASSWORD Screen)
Click CHANGE PASSWORD from the menu. Password to access the Web browser control can be set. When
the password is changed in this screen, the password used for command control and the PJLink™ security
authentication is also changed.
Item
Notes:
• The default password is “panasonic”.
• Up to 32 alphanumeric characters can be used for a
password.
• When the password is changed properly, “Password
has changed.” message is displayed.
OLD
PASSWORD
NEW
PASSWORD
Details
Enter the old password.
Enter the new password.
NEW
PASSWORD
(RETYPE)
Enter the password entered in “NEW
PASSWORD” for con¿rmation.
SAVE
Save the new password. The
con¿rmation screen is displayed.
Click OK to change the password.
51
Using Web Browser Control
Crestron Connected™ page
You can monitor or control the Display using Crestron Connected™.
When you click [Crestron Connected™], the Crestron Connected™ operation page is displayed.
If Adobe Flash Player is not installed in your computer, or if the browser does not support Flash, this page does
not appear. In this case, return to the previous page by clicking [Back] in the operation page.
Operation page
1
2
3
4
HDMI1
5
HDMI2
6
7
Tools page
Click Tools on the operation page.
1
2
3
4
5
1 Tools, Info, Help
Switches the pages for tools, information, help
using the tab.
2 POWER
Switches between on and off of the power.
3 VOL DOWN, AV MUTE, VOL UP
Sets the volume, AV mute. When the power of the
Display is turned off, VOL DOWN, AV MUTE and
VOL UP are not available.
4 Input Select
Sets the input selection. When the power of
the Display is turned off, this operation is not
available.
5 Operation buttons on the menu screen
Operates on the menu screen.
6 Image quality adjustments
Operate items related to image quality.
7 Back
Returns to the previous page.
1 Control system
Sets the information required for the communication
with the controller that is connected to the Display.
2 User Password
Sets the password for the user rights in the operation
page of Crestron Connected™.
3 Admin Password
Sets the password for the administrator rights in the
operation page of Crestron Connected™.
4 Network status
Displays the setting of LAN.
DHCP: Displays the value in the current setting.
IpAddress: Displays the value in the current setting.
SubnetMask: Displays the value in the current setting.
DefaultGateway: Displays the value in the current setting.
5 Exit
Return to the operation page.
Note:
When you monitor or control the Display using Crestron Connected™, set “Crestron Connected™” to “On” in the
“Network Setup” menu. (see page 41)
52
Using Web Browser Control
Info page
Click Info on the operation page.
4
1
LFE7-00
5
PC
2
3
6
1 Display name
Displays the name of the Display.
2 Mac Address
Displays the MAC address.
3 Resolution
Displays the resolution of the Display.
4 Power Status
Displays the status of the power.
5 Source
Displays the selected video input.
6 Exit
Return the operation page.
Help page
Click Help on the operation page.
The Help Desk screen is displayed.
1
1 Help Desk
Sends or receive messages to the administrator who
uses Crestron Connected™.
LFE7-00
PC
53
Troubleshooting
Before you call for service, determine the symptoms and make a few simple checks as shown below.
Symptoms
Picture
Checks
Sound
Interference
Noisy Sound
Electrical Appliances
Cars / Motorcycles
Fluorescent light
Normal Picture
No Sound
Volume
(Check whether the mute function has been activated on the remote control.)
No Picture
No Sound
Not plugged into AC outlet
Not switched on
PICTURE and BRIGHTNESS/Volume setting
(Check by pressing the power switch or stand-by button on the remote control.)
No Picture
Normal Sound
If a signal with a non-applicable format, or frequency is input, only the input terminal
indication is displayed.
No remote control operations can be performed.
A cracking sound is sometimes heard from the unit.
The top or bottom of the picture on the screen is cut
off when I use the zoom function.
Areas at the top and bottom of the screen where
the image is missing appear when I use the zoom
function.
Check whether the batteries have discharged completely and, if they have not, whether they were inserted properly.
Check whether the remote control sensor is exposed to an outdoor light or a strong Àuorescent light.
Check whether the remote control designed speci¿cally for use with the unit is being used. (The
unit cannot be operated by any other remote control.)
If there is nothing wrong with the picture or sound, this is the sound of the cabinet undergoing
very slight contractions in response to changes in the room temperature. There are no
adverse effects on the performance or other aspects.
Adjust the position of the picture on the screen.
When using a video software program (such as a cinema size program) with a screen
wider than one in the 16:9 mode, blank areas separate from the images are formed at the
top and bottom of the screen.
I can hear sounds coming from inside the unit.
When the power is turned on, a sound of the display panel being driven may be heard:
This is normal and not indicative of malfunctioning.
Parts of the unit become hot.
Even when the temperature of parts of the front, top and rear panels has risen, these
temperature rises will not pose any problems in terms of performance or quality.
Power automatically turns off unexpectedly.
Check the settings of “No Signal power off”, “PC Power management”, “DVI-D Power
management” and “No activity power off”. Any of them may be set to “On (Enable)”.
(see page 31, 32)
There is no picture displayed or sound output
When HDMI or DVI signals are input to the Display using a selector or distributor, sound or
sometimes.
images may not be output in the normal fashion depending on the selector or distributor used.
The symptoms may be improved by turning the power off and on again, or by replacing
the selector or distributor.
The RS-232C is uncontrollable
Check whether the connection has been made properly. (see page 12) When controlling
the RS-232C command on page 12 from the RS-232C terminal in the display, make
sure that “Control I/F Select” is “RS-232C”. (see page 41)
The LAN is uncontrollable
Check whether the connection has been made properly. (see page 47) Check whether
“Control I/F Select” is “LAN” when controlling with the WEB browser control or the command
control on page 48. (see page 41) Check whether “LAN Setup” has been con¿gured properly.
(see page 42) When connecting to a device of AMX, Crestron Electronics, Inc., set “AMX
D.D.”, “Crestron Connected™”, according to the device to use. (see page 41)
This LCD Display uses special image processing. Hence a slight time lag may occur between image and audio, depending on the type of input
signal. However, this is not a malfunction.
LCD Display panel
Symptoms
Check
The screen darkens slightly when bright pictures with
minimal movements are shown.
The screen will darken slightly when photos, still images of a computer or other pictures with
minimal movements are shown for an extended period. This is done to reduce image retention
on the screen and the shortening of the screen’s service life: It is normal and not indicative of
malfunctioning.
The unit digitally processes the various signals in order to reproduce esthetically pleasing
images. As such, it sometimes takes a few moments for the picture to appear when the
power has been turned on, when the input has been switched.
Due to the characteristics of the system used to drive the panel, the edges may appear
to Àicker in the fast-moving parts of the images: This is normal and not indicative of
malfunctioning.
This is a characteristic of liquid crystal panels and is not a problem. The liquid crystal panel
is built with very high precision technology giving you ¿ne picture details. Occasionally,
a few non-active pixels may appear on the screen as ¿xed points of red, blue, green, or
black. Please note this does not affect the performance of your LCD.
Image retention may occur. If you display a still picture for an extended period, the image
might remain on the screen. However, it will disappear after a while. This is not considered
as malfunction.
It takes a while for the picture to appear.
The edges of the images Àicker.
There may be red spots, blue spots, green spots and
black spots on the screen.
Image retention appears
54
Applicable input signals
PC signals
*Mark: Applicable input signal
Signal name
1
2
3
4
5
6
7
8
9
10
11
12
13
14
15
16
17
18
19
20
21
22
23
24
25
26
27
28
29
30
31
32
33
34
640x400@70Hz
640x480@60Hz
640x480@72Hz
640x480@75Hz
640x480@85Hz
800x600@56Hz
800x600@60Hz
800x600@72Hz
800x600@75Hz
800x600@85Hz
852x480@60Hz
1024x768@50Hz
1024x768@60Hz
1024x768@70Hz
1024x768@75Hz
1024x768@85Hz
1066x600@60Hz
1152x864@60Hz
1152x864@75Hz
1280x768@60Hz
1280x960@60Hz
1280x960@85Hz
1280x1024@60Hz
1280x1024@75Hz
1280x1024@85Hz
1366x768@50Hz
1366x768@60Hz
1400x1050@60Hz
1600x1200@60Hz
1920x1080@60Hz
1920x1200@60Hz
Macintosh13"(640x480)
Macintosh16"(832x624)
Macintosh21"(1152x870)
Horizontal frequency
(kHz)
31.46
31.47
37.86
37.50
43.27
35.16
37.88
48.08
46.88
53.67
31.47
39.55
48.36
56.48
60.02
68.68
37.64
53.70
67.50
47.70
60.00
85.94
63.98
79.98
91.15
39.55
48.36
65.22
75.00
67.50
74.04
35.00
49.72
68.68
Vertical frequency
(Hz)
70.07
59.94
72.81
75.00
85.01
56.25
60.32
72.19
75.00
85.06
59.94
50.00
60.00
70.07
75.03
85.00
59.94
60.00
75.00
60.00
60.00
85.00
60.02
75.02
85.02
50.00
60.00
60.00
60.00
60.00
59.95
66.67
74.55
75.06
PC IN
(Dot clock (MHz))
* (25.17)
* (25.18)
* (31.5)
* (31.5)
* (36.0)
* (36.0)
* (40.0)
* (50.0)
* (49.5)
* (56.25)
DVI-D IN
(Dot clock (MHz))
HDMI
* (25.18)
*
* (40.0)
*
* (34.24)
* (51.89)
* (65.0)
*
*
*
* (53.0)
* (81.62)
*
*
* (108.0)
*
* (69.92)
* (87.44)
* (122.61)
* (162.0)
* (148.5)
* (154.0)
*
*
*
*
*
*
* (65.0)
* (75.0)
* (78.75)
* (94.5)
* (108.0)
* (80.14)
* (108.0)
* (148.5)
* (108.0)
* (135.0)
* (157.5) 1
* (86.71)
* (162.0)
* (148.5)
* (30.24)
* (57.28)
* (100.0)
1 Not compatible with SYNC ON G.
• The signal format automatically detected may differ from the actual input signal in display.
Component signals
Signal name
1
2
3
4
5
6
7
8
9
10
11
12
13
14
15
16
525(480)/60i
525(480)/60p
625(575)/50i
625(576)/50i
625(575)/50p
625(576)/50p
750(720)/60p
750(720)/50p
1,125(1,080)/60p
1,125(1,080)/60i
1,125(1,080)/50p
1,125(1,080)/50i
1,125(1,080)/24psF
1,125(1,080)/30p
1,125(1,080)/25p
1,125(1,080)/24p
*Mark: Applicable input signal
Horizontal frequency
(kHz)
15.73
31.47
15.63
15.63
31.25
31.25
45.00
37.50
67.50
33.75
56.25
28.13
27.00
33.75
28.13
27.00
Vertical frequency
(Hz)
59.94
59.94
50.00
50.00
50.00
50.00
60.00
50.00
60.00
60.00
50.00
50.00
48.00
30.00
25.00
24.00
DVI-D IN
(Dot clock (MHz))
* (27.0)
* (27.0)
HDMI
*
*
* (27.0)
* (74.25)
* (74.25)
* (148.5)
* (74.25)
* (148.5)
* (74.25)
*
*
*
*
*
*
*
*
*
* (74.25)
* (74.25)
* (74.25)
*
*
*
* (27.0)
55
Shipping condition
This function allows you to reset the unit to the factory setting.
1
2
Setup
1/2
Press to display the Setup menu.
Press to select “OSD Language”.
Press for more than 3 seconds.
Signal
Screensaver
Input label
ECO Mode settings
Wobbling
YUV/RGB-in select
Off
RGB
No activity power off
Disable
English (UK)
OSD Language
3
Press to select “Shipping”.
Options
Display Serial Number
Shipping
Press to display the Shipping menu.
4
Press to select “Yes”.
Shipping
Yes
No
Press to con¿rm.
5
6
Wait for 10 seconds.
Press the power switch (
) on main unit to turn the power off.
* For TH-42LFE7U, TH-50LFE7U, TH-65LFE7U
If the power switch is locked, please disconnect the AC cord plug from the wall outlet.
[from the unit]
1 Press the MENU button till the Setup menu is displayed.
2 Press the Volume Up “+” or Down “–” button to select “OSD Language”.
3 Press and hold the ENTER button till the Shipping menu is displayed.
4 Press the Volume Up “+” or Down “–” button to select “Yes”.
5 Press the ENTER button and wait for 10 sec.
) on main unit to turn the power off.
6 Press the power switch (
* For TH-42LFE7U, TH-50LFE7U, TH-65LFE7U
If the power switch is locked, please disconnect the AC cord plug from the wall outlet.
56
Speci¿cations
Power Source
Power Consumption
Rated Power
Consumption
Stand-by condition
Power off condition
Sound
Speakers
Audio Output
LCD Display panel
Screen size
(No.of pixels)
Operating condition
Temperature
Humidity
Applicable signals
Scanning format
PC signals
Connection terminals
HDMI1
AV IN
HDMI2
DVI-D IN
AUDIO
PC IN
AUDIO
LAN
SERIAL
AUDIO
OUT
CHARGE
Dimensions (W × H × D)
Mass (weight)
TH-42LFE7U
110 - 127 V AC, 50/60 Hz
TH-42LFE7E/ER
220-240 V AC, 50/60 Hz
95 W
0.5 W
0.4 W
25 mm × 90 mm × 2 pcs
20 W [10 W+10 W] (10 % THD)
42-inch IPS panel (LED backlight), 16:9 aspect ratio
36.5” (W) × 20.5” (H) × 41.9” (diagonal) /
928 mm (W) × 522 mm (H) × 1,065mm (diagonal)
2,073,600 (1,920 (W) × 1,080 (H))
[5,760 × 1,080 dots]
32 °F - 104 °F (0 °C - 40 °C)
20 % - 80 %
525 (480) / 60i · 60p, 625 (575) / 50i · 50p, 750 (720) / 60p · 50p, 1125 (1080) / 60i · 60p · 50i ·
50p · 24p · 25p · 30p · 24psF
VGA, SVGA, XGA, SXGA
UXGA ···· (compressed)
Horizontal scanning frequency 30 - 110 kHz
Vertical scanning frequency 48 - 120 Hz
TYPE A Connector × 2
DVI-D 24 Pin
Content Protection
Stereo mini jack (M3) × 1
High-Density Mini D-sub 15 Pin
Compliance with DVI Revision 1.0
Compatible with HDCP 1.1
0.5 Vrms, Shared with PC IN
G with sync 1.0 Vp-p (75 ȍ)
G without sync 0.7 Vp-p (75 ȍ)
B: 0.7 Vp-p (75 ȍ)
R: 0.7 Vp-p (75 ȍ)
HD/VD: 1.0 - 5.0 Vp-p (high impedance)
0.5 Vrms, Shared with DVI-D IN
Stereo mini jack (M3) × 1
RJ45 10BASE-T/100BASE-TX, compatible with PJLink™
External Control Terminal
D-sub 9 Pin
RS-232C compatible
Stereo mini jack (M3) × 1
0.5 Vrms
Output level: Variable (-’ ʊ 0 dB)
[INPUT 1 kHz / 0 dB, 10 kȍ Load]
5 V/500 mA
38.0” × 22.3” × 3.1” /
963 mm × 566 mm × 77 mm
approx. 20.94 lbs (9.5 kg)
Notes:
• Design and speci¿cations are subject to change without notice. Mass and dimensions shown are approximate.
• This equipment complies with the EMC standards listed below. EN55022, EN55024, EN61000-3-2, EN61000-3-3.
57
Speci¿cations
Power Source
Power Consumption
Rated Power
Consumption
Stand-by condition
Power off condition
Sound
Speakers
Audio Output
LCD Display panel
Screen size
(No.of pixels)
Operating condition
Temperature
Humidity
Applicable signals
Scanning format
PC signals
Connection terminals
HDMI1
AV IN
HDMI2
DVI-D IN
AUDIO
PC IN
AUDIO
LAN
SERIAL
AUDIO
OUT
CHARGE
Dimensions (W × H × D)
Mass (weight)
TH-50LFE7U
110 - 127 V AC, 50/60 Hz
TH-50LFE7E
220-240 V AC, 50/60 Hz
95 W
0.5 W
0.4 W
25 mm × 90 mm × 2 pcs
20 W [10 W+10 W] (10 % THD)
50-inch VA panel (LED backlight), 16:9 aspect ratio
43.1” (W) × 24.3” (H) × 49.5” (diagonal) /
1,096 mm (W) × 616 mm (H) × 1,257mm (diagonal)
2,073,600 (1,920 (W) × 1,080 (H))
[5,760 × 1,080 dots]
32 °F - 104 °F (0 °C - 40 °C)
20 % - 80 %
525 (480) / 60i · 60p, 625 (575) / 50i · 50p, 750 (720) / 60p · 50p, 1125 (1080) / 60i · 60p · 50i ·
50p · 24p · 25p · 30p · 24psF
VGA, SVGA, XGA, SXGA
UXGA ···· (compressed)
Horizontal scanning frequency 30 - 110 kHz
Vertical scanning frequency 48 - 120 Hz
TYPE A Connector × 2
DVI-D 24 Pin
Content Protection
Stereo mini jack (M3) × 1
High-Density Mini D-sub 15 Pin
Compliance with DVI Revision 1.0
Compatible with HDCP 1.1
0.5 Vrms, Shared with PC IN
G with sync 1.0 Vp-p (75 ȍ)
G without sync 0.7 Vp-p (75 ȍ)
B: 0.7 Vp-p (75 ȍ)
R: 0.7 Vp-p (75 ȍ)
HD/VD: 1.0 - 5.0 Vp-p (high impedance)
0.5 Vrms, Shared with DVI-D IN
Stereo mini jack (M3) × 1
RJ45 10BASE-T/100BASE-TX, compatible with PJLink™
External Control Terminal
D-sub 9 Pin
RS-232C compatible
Stereo mini jack (M3) × 1
0.5 Vrms
Output level: Variable (-’ ʊ 0 dB)
[INPUT 1 kHz / 0 dB, 10 kȍ Load]
5 V/500 mA
44.4” × 25.7” × 2.1” /
1,126 mm × 652 mm × 53 mm
approx. 31.97 lbs (14.5 kg)
Notes:
• Design and speci¿cations are subject to change without notice. Mass and dimensions shown are approximate.
• This equipment complies with the EMC standards listed below. EN55022, EN55024, EN61000-3-2, EN61000-3-3.
58
Speci¿cations
Power Source
Power Consumption
Rated Power
Consumption
Stand-by condition
Power off condition
Sound
Speakers
Audio Output
LCD Display panel
Screen size
(No.of pixels)
Operating condition
Temperature
Humidity
Applicable signals
Scanning format
PC signals
Connection terminals
HDMI1
AV IN
HDMI2
DVI-D IN
AUDIO
PC IN
AUDIO
LAN
SERIAL
AUDIO
OUT
CHARGE
Dimensions (W × H × D)
Mass (weight)
TH-65LFE7U
110 - 127 V AC, 50/60 Hz
TH-65LFE7E
220-240 V AC, 50/60 Hz
135 W
0.5 W
0.4 W
22 mm × 90 mm × 2 pcs
20 W [10 W+10 W] (10 % THD)
65-inch VA panel (LED backlight), 16:9 aspect ratio
56.2” (W) × 31.6” (H) × 64.5” (diagonal) /
1,428 mm (W) × 803 mm (H) × 1,638mm (diagonal)
2,073,600 (1,920 (W) × 1,080 (H))
[5,760 × 1,080 dots]
32 °F - 104 °F (0 °C - 40 °C)
20 % - 80 %
525 (480) / 60i · 60p, 625 (575) / 50i · 50p, 750 (720) / 60p · 50p, 1125 (1080) / 60i · 60p · 50i ·
50p · 24p · 25p · 30p · 24psF
VGA, SVGA, XGA, SXGA
UXGA ···· (compressed)
Horizontal scanning frequency 30 - 110 kHz
Vertical scanning frequency 48 - 120 Hz
TYPE A Connector × 2
DVI-D 24 Pin
Content Protection
Stereo mini jack (M3) × 1
High-Density Mini D-sub 15 Pin
Compliance with DVI Revision 1.0
Compatible with HDCP 1.1
0.5 Vrms, Shared with PC IN
G with sync 1.0 Vp-p (75 ȍ)
G without sync 0.7 Vp-p (75 ȍ)
B: 0.7 Vp-p (75 ȍ)
R: 0.7 Vp-p (75 ȍ)
HD/VD: 1.0 - 5.0 Vp-p (high impedance)
0.5 Vrms, Shared with DVI-D IN
Stereo mini jack (M3) × 1
RJ45 10BASE-T/100BASE-TX, compatible with PJLink™
External Control Terminal
D-sub 9 Pin
RS-232C compatible
Stereo mini jack (M3) × 1
0.5 Vrms
Output level: Variable (-’ ʊ 0 dB)
[INPUT 1 kHz / 0 dB, 10 kȍ Load]
5 V/500 mA
57.4” × 33.1” × 2.1” /
1,458 mm × 840 mm × 52 mm
approx. 73.85 lbs (33.5 kg)
Notes:
• Design and speci¿cations are subject to change without notice. Mass and dimensions shown are approximate.
• This equipment complies with the EMC standards listed below. EN55022, EN55024, EN61000-3-2, EN61000-3-3.
59
<Software Information for This Product>
This product has software installed partially licensed under the Free BSD LICENSE.
Free BSD LICENSE regulations under the above specifications are as follows:
(These regulations are set by the third party; therefore the original (English) regulations are stated.)
Copyright © 1980, 1986, 1993
The Regents of the University of California. All rights reserved.
Redistribution and use in source and binary forms, with or without modification, are permitted provided that the
following conditions are met:
1. Redistributions of source code must retain the above copyright notice, this list of conditions and the following
disclaimer.
2. Redistributions in binary form must reproduce the above copyright notice, this list of conditions and the following
disclaimer in the documentation and/or other materials provided with the distribution.
3. All advertising materials mentioning features or use of this software must display the following acknowledgement:
This product includes software developed by the University of California, Berkeley and its contributors.
4. Neither the name of the University nor the names of its contributors may be used to endorse or promote products
derived from this software without specific prior written permission.
THIS SOFTWARE IS PROVIDED BY THE REGENTS AND CONTRIBUTORS “AS IS” AND ANY EXPRESS
OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED WARRANTIES OF
MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL
THE REGENTS OR CONTRIBUTORS BE LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL,
EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF
SUBSTITUTE GOODS OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION)
HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY,
OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF THIS
SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
60
Information for Users on Collection and Disposal of Old Equipment and used Batteries
These symbols on the products, packaging, and/or accompanying documents mean that used
electrical and electronic products and batteries should not be mixed with general household waste.
For proper treatment, recovery and recycling of old products and used batteries, please take them to
applicable collection points, in accordance with your national legislation and the Directives
2002/96/EC and 2006/66/EC.
By disposing of these products and batteries correctly, you will help to save valuable resources and
prevent any potential negative effects on human health and the environment which could otherwise
arise from inappropriate waste handling.
For more information about collection and recycling of old products and batteries, please contact your
local municipality, your waste disposal service or the point of sale where you purchased the items.
Penalties may be applicable for incorrect disposal of this waste, in accordance with national
legislation.
For business users in the European Union
If you wish to discard electrical and electronic equipment, please contact your dealer or supplier for
further information.
[Information on Disposal in other Countries outside the European Union]
These symbols are only valid in the European Union. If you wish to discard these items, please
contact your local authorities or dealer and ask for the correct method of disposal.
Note for the battery symbol (bottom two symbol examples):
This symbol might be used in combination with a chemical symbol. In this case it complies with the
requirement set by the Directive for the chemical involved.
USA only: Disposal may be regulated in your community due to
environmental considerations. For disposal or recycling information,
please visit Panasonic website: http://www.panasonic.com/environmental
or call 1-888-769-0149.
Customer’s Record
The model number and serial number of this product can be found on its rear panel. You should note this serial
number in the space provided below and retain this book, plus your purchase receipt, as a permanent record of your
purchase to aid in identi¿cation in the event of theft or loss, and for Warranty Service purposes.
Model Number
Serial Number
For TH-42LFE7U, TH-50LFE7U, TH-65LFE7U
Panasonic System Communications Company of North America
Unit of Panasonic Corporation of North America
Executive Of¿ce :
Two Riverfront Plaza, Newark, New Jersey 07102-5490
Panasonic Canada Inc.
5770 Ambler Drive
Mississauga, Ontario
L4W 2T3
Web Site : http://panasonic.net
¤ Panasonic Corporation 2014