Front Loading Washing Machine oading W

Order No. FL1010S001V1.1
Front Loading W
Washing Machine
Mdodel No. HW60-1281S
HW60-1081
ashing Machine
Chapter1 General Information ............................................................1
1.1 General Guidelines ............................................................................................1
1.2 Caution and Warning symbols .....................................................................1
1.3 Function indication symbols..........................................................................1
Chapter2 Features Of The Unit ..........................................................1
2.1 Convenient Door .................................................................................................1
2.2 Optional Spin Speed .........................................................................................1
2.3 Unique Gasket Design ......................................................................................1
2.4 Adjustive Delay Time.........................................................................................1
...........................................................................1
Chapter4
Chapter5
Chapter6
Chapter7
Chapter8
Safety Precaution..................................................................4
Operation Guidance............................................................7
Program Guide ....................................................................10
Product Parts and Dimentions ................................11
Installation.................................................................................11
8.1 Remove the packing materials ...................................................................11
8.2 Dismantle the packing bolts ........................................................................11
8.3 Adjusting the washing machine ..................................................................12
8.4 Joining the InletHose to the Washing Machine .....................................12
8.5 Connect of Power Supply ..............................................................................12
Chapter9 Trouble Shooting .................................................................13
9.1 Error Display and Trouble Shooting ..........................................................13
.
Chapter10 Wiring circuit and
Self check ..................................17
10.1 Wiring circuit ....................................................................................................17
10.2 Self check .........................................................................................................18
Service Manual
Issue
Rev.
Model No:HW60-1281S/1081
Chapter1 General Information
1.1 General Guidelines
When servicing, observe the original lead dress. If a short circuitis found, replace all parts
which are overheated or damaged by the short circuit. After servicing, see to it that all
the protective devices such as insulation barriers, insulation papers shields are properly
that the screws, parts and wiring which were removed in order to service
are put in the original positions, or whether there are the portions which are deteriorated
around the service places serviced or not. And be sure safety of that.
1.2 Caution and Warning symbols
We have provided many important safety messages in this manual. Always read and obey
all safety messages.
This is the Safety Alert Symbol. This symbol alerts you to potential hazards that can
kill or injure you and others. any instructions in this manual with the symbol must
be followed strictly.
To prevent damage to the washing machine, any instructions in this manual with
the symbol must be followed strictly.
1.3 Function indication symbols
Signify the washing machine has this function.
Signify the washing machine doesn't have this function.
Chapter2 Features Of The Unit
2.1 Convenient Door
The unit has a larger transparent door that you can observe the process of washing
conveniently, and you can put clothes in the washer or take them out conveniently.
2.2 Optional Spin Speed
you can select different spin speed according to corresponding material of the clothes.
2.3 Unique Gasket Design
The unit can left little water in the gasket after the process of washing with the unique
gasket.
2.4 Adjustive Delay Time
According to different conditions, you can select delay time from 1h to 24h.
Chapter3
1
Service Manual
Issue
Rev.
Model No:HW60-1281S/1081
Item
Unit
HW60-1281S/HW60-1081
Product identificatio
Washing Machine
Description of appliance
Type of appliance(FS = Free Standing, BI
= Built-in
Supplier own brand
Supplier barcode
Commercial Brand/Model
Commercial barcode
Key-Features
Energy efficiency clas
Washing performance class
Spin efficiency clas
Programs
EA
Capacity
kg
Spin speed (max. /optional)
r/min
Noise level sound pressure level
dB(A)
Energy consumption per wash circle
kWh
Water consumption per wash circle
L
Annual average energy consumption
kWh
Annual average water consumption
L
Residual dampness (spin result)
%
Spin speed selector switch (steps)
Adjustable thermostat (water temo. adiust
from-to)
Drum capacity dry laundry /water
Auto water level adiust (depending on
volume of filled in laundry
Washing time (max.)
min
Washing temperatures (programcontrolled)
Certification's (CE/ISO 9001 /ISO 9002
Approvals (VDE/GS/TUV/GS /IMQ)
Basic Data
Unit dimensions (H x W x D)
mm
Net weight
kg
Voltage/freguency
V/Hz
Input power/main fuse (intensity)
W/A
Work top/removable
Control M =electromechanical,
E=electronic, F=fuzzy
Drum S=stainless steel/Z =zinc coated
Tub P=Polyprop/S=stainless steel
Door:
2
FS
Haier
A
A
B
12
6
1200/1000
74
1.14
45
54%
90-x
840x595x490
65
220-240~/50
1850/10
E
S
P
Service Manual
Issue
Rev.
Model No:HW60-1281S/1081
Item
Appearance (R=round, Y =big eye, Q
=square)
Diameter
Outer door frame S=stainless steel M
=metal P=plastic
Inner door G=glass P= plastic
Detergent compartments
Removable comoartment for liquid
detergent
Delay time (from-to)
Self cleaning suds pump
cold water/hot water
Water inlethose
hose/support
Water drain
Adjustable feet
Safty System
Auto door lock
Motor overheating protection
No heating without water
Auto water cool-down (before drain 90
boiled water)
Water protection
Acqua Stop kit
Child Protection
Program
1)Cotton
2)memory
3)Synthetics
4)Wool circle
5)Silk
6)heavy
7)underwear
8)Sport wash
9)night
10)quick
11)Spin
12)self-clean
Program button(with power switch)
Start/pause
rinse
srtong wash
Economic key
Rinse hold/No Soak
Prewash
Delay timer
Unit
HW60-1281S/HW60-1081
Y
cm
32
P
EA
P
3
h
1-24
EA
4
1
1
1
1
1
1
1
1
1
1
1
1
3
Service Manual
Issue
Rev.
Model No:HW60-1281S/1081
Item
Unit
HW60-1281S/HW60-1081
speed
temperature
Gross Weight
mm
kg
EA
EA
kg
kg
kg
kg
kg
kg
W
Service
English
Chapter4 Safety Precaution
A separate earthed socket is re uired or
the po er suppl . The ashing machine
must e positioned so that the plug is
Fuses in the po er circuit should e rated
or 1 A. I the suppl cord is damaged, it
must
replaced
the
or its
service agentor similarl uali ied persons
o not touch or use the ashing machine
are- ooted or hen the hands or eet are
Hold the plug and not the electric ca le
4
Service Manual
Issue
Rev.
Model No:HW60-1281S/1081
Do not use flammable detergent or dry
cleaning agent, do not use
spray
inclose vicinity to the washing machine,
do not remove or insert the plug in the
The carpet must not obstruct the ventilation
openings in the base of the washing
machine.
The door of the washing machine will
become hot during the heating process.
Avoid contact with the door during the
heating process. Forsafety, keep children
away from the washing machine.
Keep away from heat sources and
directsun-light to prevent plastic and rubber
components from aging.
Keep children away from the packing
materials after unpacked.
During installation, ensure that the electric
cable is not trapped by the washing
machine and avoid damage the electric
cable.
The washing machine should not be
installed outdoor or in a damp place. If the
water leakages or splashes, drying naturally
is allowed.
Before using, check the joints of the filling
hose, the tap and the drain age hose for
possible problems from water pressure
fluctuations. If joints are loose or there is
leakage, turn off the tap and repair. Do not
use the washing machine until the hoses
5
Service Manual
Issue
Rev.
Model No:HW60-1281S/1081
Keeping the door slightly open to prevent
formation of odors when the washing
machine is not in use; Do not cover
the washing machine with plastic cover
otherwise dampness inside would be kept
in.
wash bras containing steel wires.
Do not open the detergent distribution
drawer during the wash cycle.
Do not place heavy, heating source or wet
articles on the top of the washing machine.
The door is fitted with a self-lock device
and will not open until 2~3 minutes after
the washing machine stops. Do not force
the door open. Do not open the door if
water level can reach the port hole.
Do not wash foam rubber or sponge-like
materials with hot water.
After each wash program, turn off the
tap to prevent leakage; and unplug the
washing machine and clean the lower part
of the port hole.
Before washing, do up zippers, buttons and
clothes straps and small articles such as
socks, lacesor bras. You can put them into
a washing bag or a pillow. Steel wires in
bras will pop out during washing, so never
6
Service Manual
Issue
Rev.
Model No:HW60-1281S/1081
Ch Operation Guidance
Heavy
Underwear
Temp.
Silk
Sport
Night
Rinse
Speed
Wool
Synthetic
Spin
Load
Memory
Spin
Wash
Cotton
Strong wash Delay
Prewash
Soak
Quick
Power
Self-clean
Start pause
Press and hold 2 seconds
to set door unlocked
A Power Button
B Start/Pause Button
C Soak Button
D Prewash Button
E Delay Button
F Strong Wash Button
G Program Selector
H Wash Time Key
I Temperture Selection Key
J Rinse Key
K Spin Speed Selection Key
L Spin Key
M Load Selection Key
N LCD
O Detergent Distribution Box
A Power Button
Press the key the washer will be automatically energized, release the key and
power is disconnected
B Start Pause Button
When the washer is energized, select the desired washing program and press the
Stare/Pause key. The indicator lamp on the upper left.corner of the key will illuminate
to indicate that the washer has started. If it needs to pause the washing
process,simply press the Start/Pause key and then dicator lamp and remining time
display will blink and the washer enter into condition. Press the Start/Pause key again
to resume washing process.(Note: Press the Start/Pause key again to resume
washing process.(Note: Press the Start/Pause key only after the desired program and
festure are set.)
C Soak Button
Press the key slightly, the key light displays. The washing machine doesn't drain the
water after the last rinse, but the laundry remains in a soak. To spin the laundry,
press this key again. The key light disappeared, and the program continue to the
end. The function is used to prevent the laundry creasing when left in the drum for a
long time
7
Service Manual
Issue
Rev.
Model No:HW60-1281S/1081
D Prewash Button
Press the key and the light in the key will illuminate. This function may adds
a prewash program before a normal wash.Please see Programm Guide.
E Delay Time
Press the key to select the desired time when the washing progress completes.
When setting this feature, the indicator lamp on the upper left corner of the key
will illuminate. Time reservation range is from 0.5 to 24 hours. The reserved time
will increase by half an hour at each pressing of the key. When the feature is
set, press Start/Pause key,and the reserve time will be displayed and count
down. At the same time, reservation indicator lamp start blinking and will go off
after the washer enters into normal washing progress.
Note:If proam key is turned after delay time is set and before program starts, the
reservation will be automatically cancelled. When delay feature is activated, the
washing start time is fixed. There will be some different between the delay time
and actual program completion time due to different water inlet time and load
distribution condition during spin-dry process.
F Strong Wash Button
Press the key and the light in the key will illuminate.This function may add the
washing time and spin time and rinse time ,it can be selected when washing
dirty clothes.This feature is unavailable in some programs. Please see Program
G Program Selector
By turning this knob, it is possible to select the desired program.Refer to
Program Guide
H Wash Time Key
Press the key and select the wash time,it adds 5 minitues for each
press.Please see Program Guide.
I Temperture Selection Key
Press the key and LCD will display the selected heating
temperature(--,30,40,50,60,90 C), which is adjustable as needed.
Note: -- means cold water washing and not heat up.
J
Rinse Key
Press the key and select the rinse time,it changes for each press.
Please see Program Guide
K Speed Selection Key
Press the key and LCD will display the selected spin-dry revolution
speed(0,400,600,800,1000,1200rpm).which is adjustable as needed. (When
NO Spin-dry feature is selected,the time will decrease correspongingly.)
L Spin Key
Press the key and select the spin time, it change according to the speed. Please see
Program Guide
8
Service Manual
Issue
Rev.
Model No:HW60-1281S/1081
M Load Key
Turn the Program selector to select the desired program (see Program Guide .) Press the
key and manually select different program and power-saving and water-saving feature based
on the volume of load. The LCD display screen indicates the selected load L-1~L-A.
Note:The load selection depends on the selected program.L-1~L-A maximum five load
selections are related to the volume of the laundry. While the laundry volume is larger than
the half tub volume, recommend to select L-4~L-A where applicable ; While the laundry
volume is smaller than the half tub volume, recommend to select L-1~L-3 where applicable;
N LCD
LCD is a window to display information including washing status, washing progress,
reservation time, remaining time, heating temperature, spin-dry speed, load selection and error
as well as well as to display addition all features such as power clean,super clean rinse and
foaming check ect.
O Detergent Distribution Box
Open the drawer,three compartments can be
seen:
Compertmant 1:Prewash detergent
Compertmant 2:Normal-Quick wash detergent
Compartment 3:Softener,conditioning agent,
perfume,etc.
9
Service Manual
Issue
Rev.
Model No:HW60-1281S/1081
Chapter6 Program Guide
Temperature
adjustment
range
( )
/
Memory
Synthetic
Silk
Heavy
Underwear
Sport
Night
Quick
Spin
Silk
Temp
( )
Spin
time
Rinse
times
(time)
(time)
(time)
30
0-MAX
0-80
0-7
0-8
Cold--90
/
0-MAX
0-80
0-6
0-8
Cold--60
30
0-1000
0-50
0-4
0-8
800
Cold--40
0-600
0-30
0-3
0-8
6
Cold--40
0-400
0-30
0-3
0-8
4
0-80
0-4
0-8
8
0-800
0-40
0-4
0-8
8
0-MAX
0-80
0-6
0-8
8
0-800
0-80
0-6
0-8
6
0-800
0-20
0-4
0-8
8
Underwear
Cold--90
Sports wear
Cold--90
Medium-soil
laundry
(r/min)
Wash
time
Cold--90
Sheet and wool
Cold--60
clothings
cotton or
synthetic
Speed
Cold--90
0-1000
60
30
Cold--40
cotton or
synthetic
800
/
0-6
400-MAX
clean the drum
Self-clean and put detergent
90
/
40
4
1
800rpm
inside
Note: 1. Washing temperature refers to the pretermission temperature allowable
during the whole washing process. The washing time varies according to
type of clothes, selected temperture and feature.
2. For clothes made of special materials such as woolens, cashmere and
wool, please check if the clothes has a machine-washing tag and the
requests to the temperature.
10
Service Manual
Issue
Rev.
Model No:HW60-1281S/1081
Chapter7 Product Parts and Dimentions
Power Cord With Plug
Detergent Dispenser
LCD
Drain Hose
Drum
Glass Window of Porthole
Filer Cover
Bottom Panel
Adjustable Foot
Chapter8 Installation
8.1 Remove the packing materials
Remove all the packing materials
(including the EPE base) to
prevent vibration during use.
Upon opening of the package,
water drops maybe seen on the
plastic bag and the porthole.
This is normal phenomenon as a
result of water test in the factory.
8.2 D i s m a n t l e t h e
packing bolts
The packing bolts are
designed for clamping antivibration components inside
of the washing machine during the transportation process.
Before use:
Remove the back plate;
Remove the three packing bolt son the back plate and take out
the rubber hose;
Replace the back plate;
Fill the holes by the packing bolts with plastic plugs.
11
Service Manual
Issue
Rev.
Model No:HW60-1281S/1081
(Attention:The packing bolts and rubber hose should be kept
in a safe place for later use)
8.3 Adjusting the washing machine
There are adjustable feet under the bottom of the washing
machine. Before use, the washing machine should be
adjusted, as shown in Fig.3, so that it is level.
8.4 Joining the InletHose to the Washing
Machine
Connect the nut on the inlethose to the connector on the water valve.
The height of the drainage outlet must be 80-100 cm. To prevent the
drainage hose from dropping of
it to the drainage hose clip at the
tie-in of water inlet valve
absorb water gasket
nut of water
inlet tube
back of the washing machine.
Use the drainage holder to keep the end of the drainage hose
retained and to prevent the
of water. It is recommended that
drainage hose tensions not be used; if an tension is needed,
please consult a service man. The additional hose should be no
Note: The drainage hose should not be submerged in water and should be securely
and leak-free. The appliance is to be connected to the waster mains using new hose-sets and that old
hose-sets should not be reused.
8.5 Connect of Power Supply
Before connecting to the power supply, check:
The socket is adequate for the ma imum power of the washing machine (For safety,
fuses in the power circuit should be rated no less than 15 A).
The voltage should meet there quirement.
The power outlet should be capable of accepting the washing machine plug. The
washing machine must be earthed before use.
Supplementary earth cable should not be necessary if the socket is connected to the
earth.
Supplementary earth cable should be installed on the upper back of the washing
12
Service Manual
Issue
Rev.
Model No:HW60-1281S/1081
machine and connected to the earth if the power supply socket has no earth
connection.
Chapter9 Trouble Shooting
9.1 Error Display and Trouble Shooting
Error message:Door is not properly shut 20s after program is started.
Pushing the door to check whether
the door is shut or not.
Shut the door properly
Cut off the power and then turn on
again.Check the voltage between
brown wire and blue wire of door lock,
is it between
AC 220-240 V ?
Door lock is damage, and has to be
replaced, and then make sure the wire
is connected properly.
Check if the wire connecting door lock
and PCB is loose
Connect the wire properly
Check the voltage between brown
wire and blue wire of PCB, is it
between AC 220-240V?
Replace PCB
Error message:Drainage error, water not emptied within 4 min.
Cut off power and water level
pressure switch wire
Check if water is emptied
13
Service Manual
Issue
Rev.
Model No:HW60-1281S/1081
x
Check if drain pump acts by touching
pump position
Check if drain pump or drain pipe is
jammed, and open the filter and clean
Cut off the power and choose spin
program to start, then check the
import voltage of drain pump, is it
between AC 220-240V?
Replace drain pump
Cut off power and pull out water level
pressure switch wire connection. Set
spin program to start. Check the
export voltage to drain pump, is it
between AC 220-240V?
The wire between PCB and drain
pump is not connected properly.
Replace the wire
Replace PCB
Error message: Temperature sensor is not properly connected or
damaged (display at the end of a program).
Cut off power and measure the
resistance of temperature sensor by
NTC exist open circuit .Replace it
Check if NTC is connected properly
Connect NTC well
Check the two black wires of NTC,
are they connected well?
Connect all wires well
Disconnect the two black wires from
PCB, and measure if the resistance
between the two black wires of PCB
is it infinite?
Replace the wire.
Replace PCB
14
Service Manual
Issue
Rev.
Model No:HW60-1281S/1081
Error message:The required water level is notreached within 8 min.
Check if water is leaking from washer
bottom. inlet pipe. drain pipe or other
pipe connection.
Readjust or replace the broken parts
Check if tap is closed or water
pressure is too low.
Open the tap or wait for normal water
pressure to use
Check if the inlet value is jammed.
Clean the inlet value
Draw out the dispenser and check if
water is entering.
Open the tap or wait for normal water
pressure to use drain pipe not reach
80. Observe if the height of em. If
water level the hose is leaking gas
Turn on power, and set pre-wash
mode, then start. Check the import
voltage of electromagnetic valve by
multimeter, is it between AC 220-240
V?
Electromagnetic valve must be
broken, please replace it.
Check if export voltage from PCB to
electromagnetic valve, is it between
AC 220-240 V?
The wire connected PCB and inlet
valve is notproperly. Please
reconnect it or replace it.
Error message:Motor speed error .it may be not properly connected
or damaged.
Cut off power, and check if motor
wire is connected well
Connect them well and test.
Check if the wire of motor is
connected wellwith computer board.
Connect them properly and test.
15
Service Manual
Issue
Rev.
Model No:HW60-1281S/1081
Pull out the motor insert string, and
check the resistance of motor speed
measurer and the winding of the
motor, is it as followed?
Replace the motor.
Check the import voltage
is it between AC 220-240V ?
Replace computer board
Error message. Water level exceeds protective value.
Cut off power and check if motor
wires are connected well
Reconnect well
Measure if resistance of motor
winding by multimeter, is it as
followed?
Put the motor in normal temperature
about ten minutes, and then test
again. If the resistance is natural, it is
caused by overheated protection.
Then check and deal with overload,
abnormal voltage. If not, please
replace motor
Pull out the wire connection of motor.
Then check if circuit is open by
multimeter
Repair wires
Error message. Motor overheat protection or is damaged.
Check if water switch hose and air
collector are jammed
Clean water switch hose and air
collector
put out the handle to see if the box
follow water
put up the pip and to see if the height
is 80cm
Without power ,connect inlet pipe to
inlet vavle,then open the tap and
observe if water is entering in
dispenser
Replace inlet valve
16
Service Manual
Issue
Rev.
Model No:HW60-1281S/1081
Without power ,connect inlet pipe to
inlet vavle,then open the tap and
observe if water is entering in
dispenser
Replace inlet valve
Chapter10 Wiring circuit and Self check
10.1 Wiring circuit
17
Service Manual
Issue
Rev.
Model No:HW60-1281S/1081
10.2. Self check
1.How to start
Press the strong wash button and power on at the same time, activate self-inspection
program the LED will display
button,machine model
will be displayed; Press "start/pause" button agin, self-inspection program will start.
2. Test item
1) When the door switch is closed for 3 seconds, 88:88 will be displayed.
2) When the main wash valve allows water to let in for 5 seconds, 77:77 will be displayed.
3) When the prewash valve allows water to let in for 5 seconds, 77:77 will be displayed.
4) When the softy water valve allows water to let in for 5 seconds, 77:77 will be displayed.
5) When the main wash valve, the prewash valve and also the softy water valve allow
water to let in for 5 seconds at the same time, 77:77 will be displayed.
6) Heater runs for 10 seconds, 66:66 will be displayed.
7) The drain pump runs for about 1 mins, 55:55 will be displayed
8) Continue to drain,distribute for 10 seconds at speed 90rps and spin for 30S at speed
800rps 44:44 will be displayed.
8) Self-inspection end: END will be indicated on display.
Model selection
1.Press the rinse button and power on at the same time for 4 seconds, and it will enter the
model-selection mode.The default display shows 1260.
2. The shows display 1460,the speed button can adjust among1460/146A /1260/126A
/1250/125A /1060/106A /1050/105A.It is avaiable to power off when press the storage
temperature button.
3.The type only can adjust from the high speed to low speed, and can not reverse adjust
(for example: 1200 model can adjust to 1000 types, but not from 1000 to 1200 types).
4.When the temperature sensor NTC disconnected, can adjust in reverse direction.
5.Model HW60-1281S/1081 you should choose 1260/1060.
18
Print In China