Powerware series 500-1400 VA Eaton 5115 UPS Product Snapshot Tower Rating: 500-1400 VA Input/Output Voltage: 110/120 Vac; 220/230/240 Vac Frequency: 50/60 Hz (auto-sensing) Configuration: Tower Features • Extends battery service life and provides advanced warning of the end of useful battery life with ABM® Technology • Delivers smooth, continuous power with pure sine wave output • Regulates power fluctuations with Buck and Boost voltage regulation • Protects equipment connected by network or phone wiring from “back door” power surges with a Network Transient Protector • Minimizes downtime with hot-swappable batteries TAA compliant models now available! • Communicates with LanSafe® power management software via serial and USB ports • Ensures data integrity with the Software Suite CD • Provides investment protection with a three-year limited warranty with product registration and a $150,000 load protection guarantee (U.S. and Canada) The cost-effective Eaton® 5115 uninterruptible power system (UPS) is designed to protect NT workstations, small servers, hubs, routers, PCs, and other electronic equipment from power disturbances. Ideally suited for small to mediumsized businesses, the 5115 features both USB and serial ports to facilitate LanSafe software communication. To prolong battery service life, the 5115 incorporates ABM Technology, which increases battery service life, optimizes recharge time for quick recovery after power outages, and provides advanced warning of the end of useful battery life. In addition, incoming voltage fluctuations are corrected so they do not affect the performance of connected equipment. Unlike other competitive UPSs in its class, which use a simulated sine wave, the 5115 provides pure sine wave output during battery operation. As a result, the connected load continues to receive a quality electrical waveform and operates smoothly even during power outages. To preserve data integrity, the 5115 is bundled with the Eaton Software Suite, which contains exclusive power management software featuring extensive power monitoring and control capabilities. Backed by superior performance, the 5115 keeps your equipment up and running without interruption. 5115 Features Serial Communication Port USB Communication Port USB and Serial Communication Ports Network Transient Protector With both USB and serial ports, you can determine the most effective means of LanSafe software communication and eliminate the need for another UPS or special cabling. Network Transient Protector The Network Transient Protector isolates your modem, fax machine, or other electronic equipment from “back door” power surges. Located on the rear panel is one in/out port for a telephone/modem line (120V models only) or an RJ45 for a 10Base-T network cable. ABM Technology Significantly Extends Battery Service Life UPS w/ABM UPS w/Trickle Charge (Minutes and seconds) Battery Backup Time The lead-acid batteries typically used in a UPS are considered viable as long as they can maintain backup times of at least half that of new batteries. The illustration to the right shows that batteries that are constantly trickle charged (as are virtually all other UPS batteries on the market today) reach the end of their useful life in less than half the time of batteries charged using ABM. ABM uses a three-stage charging technique that increases battery service life, optimizes battery recharge time, and provides advanced notification of the end of useful battery life. Informative and User-Friendly Interface The front panel of the 5115 indicates the UPS status and identifies potential power problems. Hot-Swappable Batteries Hot-swap and service the batteries without powering down the connected load. This makes it possible to extend the service life of your UPS without returning the unit for service. Battery Age (in months) Data based on tests performed by an independent battery manufacturer. On/Off Button (Start-On-Battery: Power up UPS in absence of utility power) Self-Test/Alarm Silence Button Power On On Battery Overload Service 2 Eaton 5115 UPS 5115 Rear Panels 120V Models C D A A G C A D B C G B G C A D D G B B E E E J J J F F PW5115 500 USB PW5115 750 USB PW5115 1000 USB PW5115 1400 USB 230V Models C D C G B C D B C D B G G G B H H H D H J J J I I PW5115 500i USB PW5115 750i USB A. Site Wiring Fault Indicator B. Serial Communications Port C. DIP Switches (voltage selection) J PW5115 1000i USB D. USB Communication Port E. 5-15 Receptacles F. 5-15 Plug (90º angle) G. Network Transient Protector H. 10A, IEC-320 Receptacles I PW5115 1400i USB I. 10A, IEC-320 Input Connector J. Input Overcurrent Protector Battery RunTimes (In Minutes) PW5115 500(i) PW5115 750(i) PW5115 1000(i) PW5115 1400(i) 200 VA/128W Load 17 38 41 58 300 VA/192W 11 27 28 41 500 VA/320W 5 14 15 28 600 VA/402W 9 10 19 750 VA/503W 6 8 14 900 VA/603W 6 10 1000 VA/670W 5 8 1200 VA/804W 6 1400 VA/938W 5 This guide provides typical application information. Battery runtimes are approximate and may vary with equipment, configuration, disk access, battery age, temperature, etc. 3 5115 Model Selection Guide Model Number Power Out (VA/Watts) Input Connection Output Connections Dimensions (HxWxD, in./mm) Unit Weight (lb/kg) 500/320 5-15P (4) 5-15R 7.6 x 5.9 x 10.6/193 x 150 x 270 17.2/7.8 PW5115 750 USB 750/500 5-15P (4) 5-15R 7.6 x 5.9 x 13.2/193 x 150 x 335 27.3/12.4 PW5115 1000 USB 1000/670 5-15P (6) 5-15R 7.6 x 5.9 x 13.2/193 x 150 x 335 27.8/12.6 PW5115 1400 USB 1400/950 5-15P (6) 5-15R 7.6 x 5.9 x 15.4/193 x 150 x 390 37.0/16.8 120 Vac1; 50/60 Hz auto-sensing PW5115 500 USB 230 Vac2; 50/60 Hz auto-sensing PW5115 500i USB 500/320 IEC-320, 10A (4) IEC-320 7.6 x 5.9 x 10.6/193 x 150 x 270 17.2/7.8 PW5115 750i USB 750/500 IEC-320, 10A (4) IEC-320 7.6 x 5.9 x 13.2/193 x 150 x 335 27.3/12.4 PW5115 1000i USB 1000/670 IEC-320, 10A (6) IEC-320 7.6 x 5.9 x 13.2/193 x 150 x 335 27.8/12.6 PW5115 1400i USB 1400/950 IEC-320, 10A (6) IEC-320 7.6 x 5.9 x 15.4/193 x 150 x 390 37.0/16.8 TAA Compliant SKUsEaton now offers TAA Compliant SKUS for the 5115. Please visit www.eaton.com/taaups for model specific information. 1. Also user-selectable for 110V via rear panel DIP switches. 2. 230V default; also user-selectable for 220 and 240V via rear panel DIP switches. Technical Specifications1 Electrical Input Voltage 120 and 230 Vac nominal; see Model Selection Guide for user-selectable voltages Online Voltage Range ±20% of nominal voltage at full load Nominal Input 45-65 Hz, 50/60 Hz, auto-sensing Frequency Input Protection 120V models: Resettable circuit breaker 230V models: AC source overcurrent protection device (required) Connection See Rear Panels above Battery Battery Type Sealed, maintenance-free lead-acid; starved electrolyte Battery Description 500 VA: (1) 12V, 9 Ah 750 VA: (2) 12V, 7.2 Ah 1000 VA: (2) 12V, 9 Ah 1400 VA: (3) 12V, 9 Ah Battery Recharge <3 hours to 90% capacity Battery Runtime 5 minutes minimum; See Battery Runtimes table Start-On-Battery Startup with UPS batteries in absence of utility power General Electrical Output Topology Line-interactive Power Levels 500-1400 VA Dimensions and Weight See Model Selection Guide Online Regulation -10%, +6% of nominal voltage On Battery Voltage Regulation ±5% of nominal voltage; -10% after low battery warning Network Transient In and out RJ11 jack for telephone/modem protection On Battery Frequency ±0.1 Hz of nominal frequency Protector (120V models only) or RJ45 for 10Base-T network cable; UL497A tested Regulation Environmental and Safety Voltage Wave Shape Sine wave (during normal and battery operation) Safety Markings UL, cUL, and CSA; 230V models also CE and TUV Interconnecting Cords 2 ea. IEC-320, 10A (230V models) Safety Conformance UL 1778, CAN/CSA C22.2, No. 107.1; 230V models also EN 50091-1-1 and IEC 60950 Indicators and Controls EMC Markings FCC Class B; 230V models also CE (EN50091-2) and C-Tick Surge Suppression ANSI C62.41 Category A (formerly IEEE 587) Immunity IEC 801-2, -3, -4 Operating Temp 0 to 40°C (32 to 104°F); UL tested 25° (77° F) Transit/Storage Temp -15 to 55°C (5 to 131°F) Audible Noise <45 dBA, typical Relative Humidity 5-95% non-condensing Front Panel LEDs Power on, on battery, overload, and battery fault Front Panel Buttons On/Off and alarm silence/self-test Communications Port DB9 female or USB (UPS ships with USB and serial communications cables) Power Factor 500 VA: 0.64; 750/1000 VA: 0.67; 1400 VA: 0.67. 1. Due to continuing improvement, program specifications are subject to change without notice. Battery runtimes are approximate and may vary with equipment, configuration, battery age, temperature, etc.