HP ProCurve Networking Family Brochure

HP ProCurve Networking
data sheets
May 2004
Table of contents
Why HP ProCurve ........................................................................................................................4
Product portfolio ..........................................................................................................................6
HP ProCurve switches
Layer 3 and 4+ switches—managed chassis
HP ProCurve Routing Switch 9300m Series ......................................................................................8
Layer 2, 3, and 4 switches—managed chassis
HP ProCurve Switch 5300xl Series ................................................................................................16
Layer 2 and 3 switches—managed stackables and chassis
HP ProCurve Switch 4100gl Series ................................................................................................23
HP ProCurve Switch 6108 ............................................................................................................30
HP ProCurve Switch 2800 Series ..................................................................................................33
HP ProCurve Switch 2600 Series ..................................................................................................37
Layer 2 switches—managed stackables and chassis
HP ProCurve Switch 2500 Series ..................................................................................................42
HP ProCurve Switch 4000m and Switch 8000m ............................................................................45
Layer 2 switches—unmanaged stackables
HP ProCurve Switch 2700 Series ..................................................................................................50
HP ProCurve Switch 2300 Series ..................................................................................................53
HP ProCurve Switch 2124 ............................................................................................................56
HP ProCurve Switch 408 ............................................................................................................59
HP ProCurve switch accessories
HP ProCurve Mini-GBICs ............................................................................................................62
HP ProCurve Transceivers ............................................................................................................63
HP ProCurve Redundant and External Power Supplies ....................................................................65
HP ProCurve mobile LAN products
HP ProCurve Wireless Access Point 520wl ....................................................................................66
HP ProCurve Wireless Access Point 420 ........................................................................................72
HP ProCurve Secure Access 700wl Series ......................................................................................75
HP ProCurve external antennas ....................................................................................................81
HP ProCurve software
HP ProCurve Access Control Client Software ..................................................................................85
HP ProCurve Manager and HP ProCurve Manager Plus ..................................................................87
HP ProCurve Network Management for OV-NT ..............................................................................89
HP Hub and Switch Management for OV-UX ..................................................................................91
HP ProCurve services and support
HP ProCurve service and support solutions ....................................................................................93
Contact information ....................................................................................................................95
HP ProCurve Networking
is the best choice for secure,
mobile, multi-service networks.
Command from the center.
Control to the edge.
Mobility—control your network’s
wireless and wired environment
The HP ProCurve Networking Adaptive EDGE Architecture™
enables enterprises to effectively accommodate the
enterprise network as it evolves into an anytime, anywhere
resource responsive to changing business needs. The
ability to provide secure, mobile, multi-service resources is
made possible through continuous command from the
network center with added intelligence at the edge where
users connect and policies are enforced. Control to the
edge enables a robust network infrastructure that supports
current and future business needs while ensuring secure,
appropriate network access. HP ProCurve Networking
helps customers build an adaptive enterprise network
ready to simultaneously deliver more reliability, more
flexibility, and a superior return on IT business investments.
IT managers as well as business managers must consider
a variety of requirements relative to their organization’s
mobile user strategy. These requirements include support
for both wired and wireless mobility, overall business
imperatives, as well as the organization’s specific
technology needs. Organizations now have the
opportunity to provide their mobile workers with access
to valuable information anytime or anywhere without
security risks. Furthermore, with the simplification of
wireless and wired deployment through converged
technology, there is the ability to increase productivity
through unified and robust communications. HP ProCurve
Networking solutions are the answer.
Security—protect and enable
your network
Increasing productivity without compromising network
security continues to be an important requirement for
both IT and business managers. Protecting corporate
information assets while enabling appropriate network
access based upon individuals’ needs, anytime or
anywhere, defines the ultimate in network infrastructure
expectations. This is what HP ProCurve Networking
delivers.
4
Convergence—streamline and
maximize your network
Today, implementing voice, video, and data over a single
network allows organizations to simplify and streamline
their communication systems. Converged networks are
commonly used to support business environments where
employees and customers are demanding access to
advanced applications and new ways of collaborating
across business objectives.
The HP ProCurve Networking Adaptive EDGE Architecture
offers customers an affordable way to streamline their
networks by running all traffic over an Ethernet/IP
infrastructure. HP ProCurve Networking also offers
flexibility with tested and documented convergence
solutions that interoperate with a variety of vendor products.
HP ProCurve Networking is an experienced partner
whose affordable network solutions are founded on the
Adaptive EDGE Architecture™ and aligned with your
business needs. HP ProCurve Networking enables
secure, mobile, multi-service networks with superior
return on IT, reduced complexity, trusted security, proven
reliability, choice, and flexibility.
Superior return on IT
• High-performance, no-compromise functionality at affordable prices
Price/Performance
• Adaptive EDGE Architecture maximizes current infrastructure and easily adapts to
leadership
future needs
• Industry-leading warranties
Reduced complexity
• Plug & Play
Proactive networking,
• Operational efficiency with reduced costs, better asset utilization, and increased productivity
focused innovation
Trusted security
• Robust security features for wired and wireless networks
Secure solutions from
• Industry-standard security leadership
a trusted partner
• Safe choice vendor
Proven reliability
• Industry-leading service and support
Highly available,
• Rigorous quality testing
legendary HP quality
• Best warranty in the industry with the only true lifetime warranty
• Adaptive EDGE Architecture enables highly available networks
Choice and flexibility
• Tradition of leadership in open standards allows scalable growth
Industry-standard solutions
• Multivendor interoperability for solutions with choice
• Adaptive EDGE Architecture scales and adapts to future needs
5
HP ProCurve Networking Product Portfolio
Layer 3 and 4+
Managed chassis
Layer 2, 3, and 4
Managed chassis
HP ProCurve Routing Switch 9315m
(J4874A)
• 10/100/1000/10 Gigabit
• 15 open module slots for up to
28 10-GbE, 232 Gigabit, or 672
10/100 ports
HP ProCurve Routing Switch 9308m
(J4138A)
• 10/100/1000/10 Gigabit
• 8 open module slots for up to
14 10-GbE, 120 Gigabit, or 336
10/100 ports
HP ProCurve Routing Switch 9304m
(J4139A)
• 10/100/1000/10 Gigabit
• 4 open module slots for up to
6 10-GbE, 56 Gigabit, or 144
10/100 ports
HP ProCurve Switch 5372xl
(J4848A)
• 72 10/100 ports
• 5 open module slots
HP ProCurve Switch 5304xl-32G
(J8166A) NEW!
• 28 10/100/1000 ports
• 4 dual-personality ports
• 2 open module slots
HP ProCurve Switch 5308xl-48G
(J8167A) NEW!
• 42 10/100/1000 ports
• 6 dual-personality ports
• 5 open module slots
HP ProCurve Switch 5304xl
(J4850A)
• Same chassis as 5348xl
• 4 open module slots
HP ProCurve Switch 5308xl
(J4819A)
• Same chassis as 5372xl
• 8 open module slots
Layer 2 and 3*
Managed chassis
Managed stackables
Layer 2
Managed chassis and
managed stackables
Unmanaged stackables
6
HP ProCurve Switch 5348xl
(J4849A)
• 48 10/100 ports
• 2 open module slots
HP ProCurve Switch 4160gl
(J8152A)
• 60 10/100/1000 ports
• 6 mini-GBIC slots
• 5 open module slots
HP ProCurve Switch 4140gl
(J8151A)
• 40 10/100/1000 ports
• 4 mini-GBIC slots
• 2 open module slots
HP ProCurve Switch 4108gl
(J4865A)
• Same chassis as the 4160gl
• 8 open module slots
HP ProCurve Switch 4104gl
(J4887A)
• Same chassis as the 4140gl
• 4 open module slots
HP ProCurve Switch 2848
(J4904A)
• 44 10/100/1000 ports
• 4 dual-personality ports
HP ProCurve Switch 2650
(J4899A)
• 48 10/100 ports
• 2 dual-personality ports
HP ProCurve Switch 2824
(J4903A)
• 20 10/100/1000 ports
• 4 dual-personality ports
HP ProCurve Switch 2626
(J4900A)
• 24 10/100 ports
• 2 dual-personality ports
HP ProCurve Switch 2524
(J4813A)
• 24 10/100 ports
• 2 open transceiver slots
HP ProCurve Switch 2512
(J4812A)
• 12 10/100 ports
• 2 open transceiver slots
HP ProCurve Switch 4000m
(J4121A)
• 40 10/100 ports
• 5 open module slots
• 10/100/1000 flexibility
HP ProCurve Switch 2724 (J4897A)
• 24 10/100/1000 ports
HP ProCurve Switch 2708 (J4898A)
• 8 10/100/1000 ports
HP ProCurve Switch 2124 (J4868A)
• 24 10/100 ports
• 1 open transceiver slot for 100-FX
HP ProCurve Switch 2324 (J4818A)
• 24 10/100 ports
• 2 open transceiver slots
HP ProCurve Switch 2312 (J4817A)
• 12 10/100 ports
• 2 open transceiver slots
HP ProCurve Switch 408 (J4097B)
• 8 10/100 ports
HP ProCurve Switch 4108gl bundle
(J4861A)
• 72 10/100 ports
• 3 open transceiver slots
• 4 open module slots
HP ProCurve Switch 4148gl
(J4888A)
• 48 10/100 ports
• 2 open module slots
* Basic IP routing
HP ProCurve Switch 6108
(J4902A)
• 6 10/100/1000 ports
• 2 dual-personality ports
Power over Ethernet
HP ProCurve Switch 2650-PWR
(J8165A)
• 48 10/100 ports
• 2 dual-personality ports
• IEEE 802.3af compliant for PoE
HP ProCurve Switch 2626-PWR
(J8164A)
• 24 10/100 ports
• 2 dual-personality ports
• IEEE 802.3af compliant for PoE
HP ProCurve Switch 8000m
(J4110A)
• Same chassis as 4000m
• 10 open module slots
Actual product appearance may differ slightly. Some products are shown with optional transceivers or modules installed.
HP ProCurve Networking Product Portfolio
Mobile LAN
products
Access points
HP ProCurve Wireless Access Point
520wl (J8133A)
• 802.1X port-based access control
• 16 VLANs and SSID support
• Simultaneously supports
802.11 b/g and a**
• Unauthorized access
point detection
• Wi-Fi Protected Access
Secure access
HP ProCurve Access Controller
720wl (J8153A)
• Secure, scalable connectivity
between wireless clients and
wired network
• Enforces authentication, access
rights, and data encryption
• Up to 12 wireless access points
• Used with the 740wl or 760wl
HP ProCurve Access Control Server
740wl (J8154A)
• Centralized security configuration
and user policy management
• Secure uninterrupted subnet
roaming
• Supports thousands of wireless
users within a domain
• Used with the 720wl
HP ProCurve Integrated Access
Manager 760wl (J8155A)
• For smaller networks or remote
offices
• Combines functionality of 720wl
and 740wl
External access point
antennas
HP ProCurve 6 dBi indoor/outdoor
omnidirectional antenna (J8441A)
• Enables campus-wide
indoor/outdoor coverage
HP ProCurve 6 dBi indoor/outdoor
directional antenna (J8443A)
• Designed for minimal visual impact
• Flexible installation for precise
control of radio signal
characteristics
HP ProCurve 6.5 dBi
indoor/outdoor directional
diversity antenna (J8445A)
• Flexible installation for precise
control of radio signal
characteristics
• Two patch antennas in same
enclosure
HP ProCurve MC-Card to
R-SMA cable (J8447A)
• Adapts R-SMA fitted
antennas to 520wl
HP ProCurve 2 dBi indoor
omnidirectional diversity
antenna (J8442A)
• Two separate 2 dBi
omnidirectional elements
• Supports installation in the
plenum or above a ceiling
HP ProCurve 8 dBi outdoor
omnidirectional antenna (J8444A)
• 360-degree coverage for outdoor
wireless LAN campus
applications
HP ProCurve 11 dBi
indoor/outdoor wide angle
directional antenna (J8446A)
• Ideal for outdoor campus and
indoor lecture halls
• Meets indoor aesthetics
requirements yet can withstand
harsh outdoor environments
HP ProCurve 14 dBi yagi
antenna (J8448A)
• High gain directional antenna for
deploying 2.4 GHz point-to-point
wireless bridging
• Can be used for long narrow
coverage environments
Network
management
HP ProCurve Manager
• Included in-box with all
manageable devices
• A Windows®-based network
management solution
HP ProCurve Manager Plus (J8172A)
• A complete, Windows-based
network management solution
with basic and advanced
management features
• Available as an upgrade for
HP ProCurve Manager
HP ProCurve Network Management
for OV-NT (J4869B)
• An HP ProCurve network
management solution that
integrates directly into
HP OpenView Network Node
Manager for Windows NT®
HP ProCurve Network Management
for OV-UX (J3250P)
• An HP ProCurve network
management solution that
integrates directly into
HP OpenView Network Node
Manager for HP-UX
Services and
support
Industry-leading warranty
• Lifetime coverage (one year for
9300m and 700wl series products)
with next-business-day advance
replacement in most locations
Web support
• Free software updates
• Proactive e-mail notification of
software releases
• Free technical product support
via e-mail
HP ProCurve Design Center
• Free comprehensive network
design and configuration services
HP Care Packs
• Onsite service
• 24 x 7 phone support
• Installation and configuration
NEW!
Worldwide telephone assistance
• Free telephone support during
HP business hours
HP ProCurve Wireless Access
Point 420 (J8130A/J8131A)
Service contracts
• Multivendor network support
• Network environment support
• Network fault isolation
• 802.1X port-based
access control
• 802.1Q-compliant, supports
up to 64 VLANs
• IEEE 802.11g single-radio design
• IEEE 802.3af Power over Ethernet
• Wi-Fi Protected Access
**Requires an HP ProCurve 150wl, 160wl, or 170wl card (ordered separately)
7
HP ProCurve Routing Switch
9300m Series
HP ProCurve Routing Switch 9315m
(J4874A)
HP ProCurve Routing Switch 9308m
(J4138A)
HP ProCurve Routing Switch 9304m
(J4139A)
The HP ProCurve Routing Switch 9300m series delivers a new level of
high-performance capabilities and investment protection for medium and
large enterprise networks. By providing high-performance throughput from
the wiring closet into the data center and out to the edge of the WAN, the
Routing Switch 9300m series’ non-blocking architecture enables network
managers to build scalable and highly available network designs.
8
HP ProCurve Routing Switch 9300m Series
Features and benefits
• Enhanced Performance (EP) technology:
– Extended port density to enhance system capabilities
and overall investment protection
– sFlow (RFC 3176) wire-speed traffic accounting and
monitoring
– Jumbo frames on Gigabit and 10 Gigabit ports allow
high-performance remote backup and disaster
recovery services
– Increased on-board memory and flash capacity for
more robust management capabilities
• 10 Gigabit Ethernet: simplify data center configurations
and increase backbone throughput
• T-Flow traffic management: simultaneously process
access control lists (ACLs), perform policy-based routing
(PBR), perform network address translation (NAT),
and collect and export statistics for NetFlow-based
accounting and billing, all at wire speed
• Up to 345 million pps performance: provides the high
performance required by large networks
• Layer 4 prioritization: delivers QoS (quality of service)
for delay-sensitive applications
• IP/IPX/AppleTalk routing: provides routing of IP and IPX
at media speed
• IP multicast routing: provides IGMP, DVMRP, PIM-dense,
PIM-sparse, and PIM snooping mode support in routed
environments to control multicast traffic
• Unparalleled security: protection against denial-ofservice attacks; Secure Shell, Secure Copy, wire-speed
rate limiting, and user authentication (with AAA,
RADIUS, and TACACS+) prevent unauthorized network
access and associated downtime
• Policy-based VLANs: allow you to assign VLANs on a
port, protocol, subnet, or IEEE 802.1Q tagged basis
• Dynamic IP ACLs and MAC filters: provide an additional
level of security via dynamic port configuration to
802.1X ports based on user profile information sent
by the Authentication Server
• Port trunking: for higher switch-to-switch and switchto-server throughput and link-level redundancy,
with support for standards-based link aggregation
(IEEE 802.3ad)
• Next-generation Spanning Tree functionality: singleinstance STP, Per VLAN Spanning Tree (PVST), Per
VLAN Group STP (PVGST), and Rapid Spanning Tree
Protocol based on IEEE 802.1w all provide improved
availability and scalability for Spanning Tree-based
networks
• Software updates: free downloads from the Web
• Optional redundant power supply: provides
uninterrupted power for high availability
• Hot-swappable chassis modules: allow you to swap
modules without interrupting the network
• Automatic routing switch failover: provides hot standby
redundancy using standards-based VRRP (Virtual Router
Redundancy Protocol) or SRP (Standby Routing Protocol)
• Optional redundant management: provides automatic
failover from the active management module to the
standby management module for high availability
• Industry-leading warranty: one-year next-business-day
advance replacement (available in most countries) with
extensions available
• Full-featured console: provides complete control of the
switch with a familiar command line interface
• Web interface: allows you to configure the switch from
any Web browser on the network
• Hardware-based wire-speed access control lists: featurerich ACL implementation (selective ACL logging,
scalability, and syntax compatibility) to ensure high
levels of security and ease of administration without
impacting network performance
9
HP ProCurve Routing Switch 9300m Series
Services
HP ProCurve Switch 9308m and Switch 9315m:
• 3-year, parts only, global next-day advance exchange
(UA121A/E)
HP ProCurve Switch 9304m:
• 3-year, parts only, global next-day advance exchange
(UA120A/E)
• 3-year, 4-hour onsite, 13 x 5 coverage, 13 x 5 phone
support, for hardware (H2885A/E)
• 3-year, 4-hour onsite, 13 x 5 coverage, 13 x 5 phone
support, for hardware (H2887A/E)
• 3-year, 4-hour onsite, 24 x 7 coverage, 24 x 7 phone
support, for hardware (H2886A/E)
• 3-year, 4-hour onsite, 24 x 7 coverage, 24 x 7 phone
support, for hardware (H2888A/E)
• 3-year, 4-hour onsite, 24 x 7 coverage for hardware,
24 x 7 software phone support (U2867A/E)
• 3-year, 4-hour onsite, 24 x 7 coverage for hardware,
24 x 7 software phone support (U2865A/E)
• 1-year, post-warranty, parts only, global next-day
exchange (H7640PA/PE)
• 1-year, post-warranty, parts only, global next-day
exchange (H7639PA/PE)
• 1-year, post-warranty, 4-hour onsite, 13 x 5 coverage,
13 x 5 phone support, for hardware (H2739PA/PE)
• 1-year, post-warranty, 4-hour onsite, 13 x 5 coverage,
13 x 5 phone support, for hardware (H2738PA/PE)
• 1-year, post-warranty, 4-hour onsite, 24 x 7 coverage
for hardware (U2868PA/PE)
• 1-year, post-warranty, 4-hour onsite, 24 x 7 coverage
for hardware (U2866PA/PE)
• Installation with minimum configuration, system-based
pricing (U4829A/E)
• Installation with minimum configuration, system-based
pricing (U4829A/E)
• Installation with HP-provided configuration, system-based
pricing (U4833A/E)
• Installation with HP-provided configuration, system-based
pricing (U4833A/E)
For details about services and response times in your
area, please contact your local HP sales office.
10
HP ProCurve Routing Switch 9300m Series
Specifications
HP ProCurve Routing Switch 9315m (J4874A)
HP ProCurve Routing Switch 9308m (J4138A)
HP ProCurve Routing Switch 9304m (J4139A)
15 open module slots
Supports a maximum of 28 10-GbE, 232 Gigabit, or
672 10/100 ports, or a combination1
8 open module slots
Supports a maximum of 14 10-GbE, 120 Gigabit,
or 336 10/100 ports, or a combination1
4 open module slots
Supports a maximum of 6 10-GbE, 56 Gigabit,
or 144 10/100 ports, or a combination1
Weight (fully loaded)
29.75 x 19.0 x 15.25 in. (75.7 x 48.3 x 38.7 cm)
(17U height)
256 lb. (116.3 kg)
20.75 x 17.5 x 15.25 in. (52.7 x 44.4 x 38.7 cm)
(12U height)
117 lb. (53.1 kg)
9 x 17.5 x 15 in. (22.8 x 44.4 x 38.1 cm)
(5U height)
60 lb. (27.2 kg)
Memory and processor
EP management (J4885A)
Packet buffer size
Processor type and speed
RAM/ROM capacity
Flash capacity
4 MB per module
Motorola PowerPC @ 466 MHz
512 MB per module
16 MB
4 MB per module
Motorola PowerPC @ 466 MHz
512 MB per module
16 MB
4 MB per module
Motorola PowerPC @ 466 MHz
512 MB per module
16 MB
Standard management (J4857A)
Packet buffer size
Processor type and speed
RAM/ROM capacity
Flash capacity
8 MB per module
Motorola PowerPC @ 466 MHz
256 MB per module
8 MB
8 MB per module
Motorola PowerPC @ 466 MHz
256 MB per module
8 MB
8 MB per module
Motorola PowerPC @ 466 MHz
256 MB per module
8 MB
T-Flow management (J4879A)
Packet buffer size
Processor type and speed
SDRAM capacity
Flash capacity
8 MB per module
4 Motorola PowerPC @ 466 MHz each
1.25 GB per module
16 MB
8 MB per module
4 Motorola PowerPC @ 466 MHz each
1.25 GB per module
16 MB
8 MB per module
4 Motorola PowerPC @ 466 MHz each
1.25 GB per module
16 MB
Mounts in an EIA-standard 19 in. telco rack or
equipment cabinet (hardware included);
horizontal surface mounting only
Mounts in an EIA-standard 19 in. telco rack or
equipment cabinet (hardware included);
horizontal surface mounting only
Mounts in an EIA-standard 19 in. telco rack or
equipment cabinet (hardware included);
horizontal surface mounting only
Performance
Latency
Throughput
Routing/Switching capacity
Address table size
<7 µs (FIFO)
345 mpps (64-byte packets)
480 Gbps
64,000 entries
<7 µs (FIFO)
178 mpps (64-byte packets)
256 Gbps
64,000 entries
<7 µs (FIFO)
83 mpps (64-byte packets)
128 Gbps
64,000 entries
Environment
Operating temperature
Operating relative humidity
Non-operating/storage temperature
Non-operating/storage relative humidity
Shock and vibration
32°F to 104°F (0°C to 40°C)
5% to 90% @ 104°F (40°C), non-condensing
–13°F to 158°F (–25°C to 70°C)
90% @ 149°F (65°C), non-condensing
EN 60068 (IEC 68)
32°F to 104°F (0°C to 40°C)
5% to 90% @ 104°F (40°C), non-condensing
–13°F to 158°F (–25°C to 70°C)
90% @ 149°F (65°C), non-condensing
EN 60068 (IEC 68)
32°F to 104°F (0°C to 40°C)
5% to 90% @ 104°F (40°C), non-condensing
–13°F to 158°F (–25°C to 70°C)
95% @ 149°F (65°C), non-condensing
EN 60068 (IEC 68)
Electrical characteristics
Maximum BTUs
Voltage
Current
Power
Frequency
5,857 BTU/hr
100–120 VAC/200–240 VAC
17A/8.5A
1,715W
50/60 Hz
2,835 BTU/hr
100–120 VAC/200–240 VAC
8A/4A
830W
50/60 Hz
1,435 BTU/hr
100–120 VAC/200–240 VAC
8A/4A
420W
50/60 Hz
Safety
EN 60950/IEC 950; UL 1950; CSA 950
EN 60950/IEC 950; UL 1950; CSA 950
EN 60950/IEC 950; UL 1950; CSA 950
Emissions
FCC Class A; EN 55022/CISPR 22 Class A;
VCCI Class A
FCC Class A; EN 55022/CISPR 22 Class A;
VCCI Class A
FCC Class A; EN 55022/CISPR 22 Class A;
VCCI Class A
IEC 61000-4-2; 4 kV CD, 8 kV AD
IEC 61000-4-3; 3V/m
IEC 61000-4-4; 1.0 kV (power line),
0.5 kV (signal line)
IEC 61000-4-6; 3V
IEC 61000-4-2; 4 kV CD, 8 kV AD
IEC 61000-4-3; 3V/m
IEC 61000-4-4; 1.0 kV (power line),
0.5 kV (signal line)
IEC 61000-4-6; 3V
IEC 61000-4-2; 4 kV CD, 8 kV AD
IEC 61000-4-3; 3V/m
IEC 61000-4-4; 1.0 kV (power line),
0.5 kV (signal line)
IEC 61000-4-6; 3V
Management
HP ProCurve Manager (included);
HP ProCurve Manager Plus; 802.3 Ethernet MIB;
Repeater MIB; Ethernet Interface MIB
HP ProCurve Manager (included);
HP ProCurve Manager Plus; 802.3 Ethernet MIB;
Repeater MIB; Ethernet Interface MIB
HP ProCurve Manager (included);
HP ProCurve Manager Plus; 802.3 Ethernet MIB;
Repeater MIB; Ethernet Interface MIB
Standards and protocols
IEEE 802.3x Flow Control; RFC 1058 RIP;
RFC 1583 OSPFv2; IEEE 802.1D Spanning Tree;
SSHv1/SSHv2 Secure Shell, RADIUS, and
TACACS+ support; IEEE 802.1Q VLANs;
IEEE 802.1Q VLAN tagging; SNMPv1, SNMPv2c,
SNMPv3 support; RFC 1493 Bridge MIB;
RFC 2819 RMON groups: 1 (statistics), 2 (history),
3 (alarm), and 9 (events); IEEE 802.1p Priority;
RFC 1075 DVMRP; PIM-dense, PIM-sparse, and
PIM snooping mode; RFC 1723 RIPv2
IEEE 802.3x Flow Control; RFC 1058 RIP;
RFC 1583 OSPFv2; IEEE 802.1D Spanning Tree;
SSHv1/SSHv2 Secure Shell, RADIUS, and
TACACS+ support; IEEE 802.1Q VLANs;
IEEE 802.1Q VLAN tagging; SNMPv1, SNMPv2c,
SNMPv3 support; RFC 1493 Bridge MIB;
RFC 2819 RMON groups: 1 (statistics), 2 (history),
3 (alarm), and 9 (events); IEEE 802.1p Priority;
RFC 1075 DVMRP; PIM-dense, PIM-sparse, and
PIM snooping mode; RFC 1723 RIPv2
IEEE 802.3x Flow Control; RFC 1058 RIP;
RFC 1583 OSPFv2; IEEE 802.1D Spanning Tree;
SSHv1/SSHv2 Secure Shell, RADIUS, and
TACACS+ support; IEEE 802.1Q VLANs;
IEEE 802.1Q VLAN tagging; SNMPv1, SNMPv2c,
SNMPv3 support; RFC 1493 Bridge MIB;
RFC 2819 RMON groups: 1 (statistics), 2 (history),
3 (alarm), and 9 (events); IEEE 802.1p Priority;
RFC 1075 DVMRP; PIM-dense, PIM-sparse, and
PIM snooping mode; RFC 1723 RIPv2
Ports
Maximum ports
Physical characteristics
Dimensions
Mounting
Immunity
ESD
Radiated
EFT/Burst
Conducted
1
This product requires a management module (ordered separately). Shown with optional modules installed.
11
HP ProCurve Routing Switch 9300m Series
Modules and RPS
HP ProCurve 9300 EP 8-Port Mini-GBIC Redundant
Management Module (J4885A)
with 8 open mini-GBIC slots
HP ProCurve 9300 EP 16-Port Mini-GBIC Module
(J4894A)
with 16 open mini-GBIC slots
HP ProCurve 9300 EP 16-Port 100/1000-T Module
(J4895A)
with 16 auto-sensing 100/1000 ports
Ports
8 open mini-GBIC slots
1 RS-232C DB-9 console port
Duplex: full
Mini-GBICs supported (ordered separately)
• J4858A HP ProCurve Gigabit-SX-LC mini-GBIC
• J4859A HP ProCurve Gigabit-LX-LC mini-GBIC
• J4860A HP ProCurve Gigabit-LH-LC mini-GBIC
Physical characteristics
Dimensions: 16.0 x 12.5 x 1.0 in.
(40.6 x 31.75 x 2.5 cm)
Weight: 4.35 lb. (1.97 kg )
This module cannot be installed in the same chassis
with non-EP modules.
Two modules are required for redundant configuration.
Ports
16 open mini-GBIC slots
Duplex: full
Mini-GBICs supported (ordered separately)
• J4858A HP ProCurve Gigabit-SX-LC mini-GBIC
• J4859A HP ProCurve Gigabit-LX-LC mini-GBIC
• J4860A HP ProCurve Gigabit-LH-LC mini-GBIC
Physical characteristics
Dimensions: 16.0 x 12.54 x 1.0 in.
(40.6 x 31.75 x 2.5 cm)
Weight: 4.31 lb. (1.94 kg)
This module cannot be installed in the same chassis
with non-EP modules.
Ports
16 auto-sensing 100/1000 ports (IEEE 802.3 Type
10Base-T; 802.3u Type 100Base-TX)
Connector: RJ-45
Duplex: full
Physical characteristics
Dimensions: 16.0 x 12.5 x 1.0 in.
(40.6 x 31.75 x 2.5 cm)
Weight: 4.31 lb. (1.95 kg)
Cabling
Type:
• 100Base-TX: Category 5 (or better), 100Ω
differential unshielded twisted pair (UTP) or shielded
twisted pair (STP), complying with IEEE 802.3u
100Base-TX
• 1000Base-T: Category 5 (5E or better recommended),
100Ω differentiated 4-pair unshielded twisted pair
(UTP) or shielded twisted pair (STP), complying with
IEEE 802.3ab 1000Base-T
This module cannot be installed in the same chassis
with non-EP modules.
HP ProCurve 9300 EP 48-Port 10/100-TX RJ-45 Module
(J4881A)
with 48 auto-sensing 10/100 ports
Ports
48 auto-sensing 10/100 ports (IEEE 802.3 Type
10Base-T; 802.3u Type 100Base-TX)
Connector: RJ-45
Duplex: half or full
Physical characteristics
Dimensions: 16.0 x 12.5 x 2.0 in.
(40.6 x 31.75 x 5.1 cm)
Weight: 5.2 lb. (2.36 kg)
Cabling
Type:
• 10Base-T: Category 3 (or better), 100Ω differential
unshielded twisted pair (UTP) or shielded twisted
pair (STP), complying with IEEE 802.3 Type 10Base-T
specifications
• 100Base-TX: Category 5 (or better), 100Ω differential
unshielded twisted pair (UTP) or shielded twisted
pair (STP), complying with IEEE 802.3u 100Base-TX
This module cannot be installed in the same chassis
with non-EP modules.
12
Services for accessories are covered under the product in which they are installed.
HP ProCurve Routing Switch 9300m Series
Modules and RPS
HP ProCurve 9300 EP 48-Port 10/100-TX Telco (RJ-21)
Module (J4889A)
with 48 auto-sensing 10/100 ports
Ports
48 auto-sensing 10/100 ports (IEEE 802.3 Type
10Base-T; 802.3u Type 100Base-TX)
Connector: RJ-21
Duplex: half or full
Physical characteristics
Dimensions: 16.0 x 12.5 x 1.0 in.
(40.6 x 31.75 x 2.5 cm)
Weight: 4.65 lb. (2.11 kg)
Cabling
Type:
• 10Base-T: Category 3 (or better), 100Ω differential
unshielded twisted pair (UTP) or shielded twisted
pair (STP), complying with IEEE 802.3 Type 10Base-T
specifications
• 100Base-TX: Category 5 (or better), 100Ω
differential unshielded twisted pair (UTP) or shielded
twisted pair (STP), complying with IEEE 802.3u
100Base-TX
This module cannot be installed in the same chassis
with non-EP modules.
HP ProCurve 9300 2-Port 10 GbE Module (J8174A)
single-slot module provides two ports 10 GbE connectivity
Ports
2 open 10 GbE XENPAK transceiver slots
Duplex: full
Cabling
See specifications for XENPAK transceivers on
page 15.
Physical characteristics
Dimensions: 16.0 x 12.5 x 1.0 in.
(40.64 x 31.75 x 2.54 cm)
Weight: 5.2 lb. (2.4 kg)
This module can be installed in the same chassis with
either EP or non-EP modules.
This module requires software version 7.6.04 or
greater.
XENPAK transceivers supported (ordered separately):
• J8173A HP ProCurve 9300 10 GbE LR Optic
• J8175A HP ProCurve 9300 10 GbE SR Optic
• J8176A HP ProCurve 9300 10 GbE ER Optic
HP ProCurve 9300 EP 100Base-FX Module (J8178A)
with 24 100Base-FX portss
Services for accessories are covered under the product in which they are installed.
Ports
24 100Base-FX ports
(IEEE 802.3u Type 100Base-FX)
Duplex: full
Physical characteristics
Dimensions: 16.0 x 12.5 x 1.0 in.
(40.6 x 31.75 x 2.5 cm)
Weight: 3.0 lb. (1.35 kg)
Cabling
Type: 62.5/125 µm or 50/125 µm (core/cladding)
diameter, graded-index, multimode fiber-optic,
complying with ITU-T G.651 and ISO/IEC 793-2
Type A1b or A1a, respectively
Maximum distance: 2 km
Note
This module can not be installed in the same chassis
with non-EP modules.
13
HP ProCurve Routing Switch 9300m Series
Modules and RPS
Ports
Portless management module
1 RS-232C DB-9 console port
HP ProCurve 9300 T-Flow Redundant Management
Module (J4879A)
Portless management module with NetFlow and sFlow capability for traffic
metering and traffic analysis applications
HP ProCurve 9304m/9308m Redundant Power Supply
(J4147A)
not pictured
Physical characteristics
Dimensions: 16.0 x 12.5 x 1.0 in.
(40.64 x 31.75 x 2.54 cm)
Weight: 4.96 lb. (2.23 kg)
Physical characteristics
Dimensions: 13.6 x 7.3 x 3.15 in.
(34.54 x 18.54 x 8.0 cm)
Weight: 8.15 lb. (3.67 kg)
Electrical characteristics
• Voltage: 100–120 VAC/200–240 VAC
• Current: 8.0A/4.0A
• Frequency: 50/60 Hz
HP ProCurve 9315m Redundant Power Supply
(J4875A)
not pictured
This module cannot be installed in the same chassis
with EP modules.
Redundancy requires software version 7.6.01 or greater.
Two modules are required for redundant configuration.
Physical characteristics
Dimensions: 15.5 x 7.75 x 4.4 in.
(39.37 x 19.68 x 11.18 cm)
Weight: 14.5 lb. (6.53 kg)
For additional RPS specification information, see the
data sheet for the product in which the RPS is being
installed.
This RPS is supported only in the following chassis:
• J4138A HP ProCurve Routing Switch 9308m
• J4139A HP ProCurve Routing Switch 9304m
For additional RPS specification information, see the
data sheet for the product in which the RPS is being
installed.
This RPS is supported only in the J4874A HP ProCurve
Routing Switch 9315m.
Electrical characteristics
• Voltage: 100–120 VAC/200–240 VAC
• Current: 16A
• Frequency: 47/63 Hz
14
Services for accessories are covered under the product in which they are installed.
HP ProCurve Routing Switch 9300m Series
Modules and RPS
Ports
1 10 Gigabit Ethernet port (IEEE 802.3ae
Type 10Gbase-LR 1310 nm serial optics)
Connector: SC
Duplex: full
HP ProCurve 9300 10 GbE LR Optic (J8173A)
XENPAK-based hot-pluggable optic for use with 9300 2-port 10 GbE
module. LR or 10 km distance.
Physical characteristics
Dimensions: 4.76 x 1.42 x 0.69 in.
(12.1 x 3.6 x 1.74 cm)
Weight: .30 lb. (0.14 kg)
Ports
1 10 Gigabit Ethernet port (IEEE 802.3ae
Type 10Gbase-ER 1550 nm serial optics)
Connector: SC
Duplex: full
HP ProCurve 9300 10 GbE ER Optic (J8176A)
XENPAK-based hot-pluggable optic for use with 9300 2-port 10 GbE
module. ER or 40 km distance.
Physical characteristics
Dimensions: 4.76 x 1.42 x 0.69 in.
(12.09 x 3.61 x 1.75 cm)
Weight: .30 lb. (0.14 kg)
Ports
1 10 Gigabit Ethernet port (IEEE 802.3ae
Type 10Gbase-SR 850 nm serial optics)
Connector: SC
Duplex: full
HP ProCurve 9300 10 GbE SR Optic (J8175A)
XENPAK-based hot-pluggable optic for use with 9300 2-port 10 GbE
module. SR or 300 m distance.
Physical characteristics
Dimensions: 4.76 x 1.42 x 0.69 in.
(12.09 x 3.61 x 1.75 cm)
Weight: .30 lb. (0.14 kg)
Cabling
Type: 8/125 µm (core/cladding) diameter, singlemode fiber-optic, complying with ITU-T G.652
Maximum distance: 10 km
For use with HP ProCurve 9300 2-Port 10 GbE Module
(J8174A) only.
Optic only—module sold separately.
Cabling
Type: 8/125 µm (core/cladding) diameter, singlemode fiber-optic, complying with ITU-T G.652.
Requires a minimum of 5 dB attenuation or a cable
length of 10 km.
Maximum distance: 40 km
For use with HP ProCurve 9300 2-Port 10 GbE Module
(J8174A) only.
Optic only—module sold separately.
Cabling type:
• 50/125 µm (core/cladding) diameter, multimode
fiber-optic, with effective modal bandwidth of
2000 MHz/km as detailed in TIA-492AAAC
• 62.5/125 µm (core/cladding) diameter, multimode
fiber-optic, with effective modal bandwidth of
400 MHz/km as detailed in TIA-492AAAC
• 62.5/125 µm (core/cladding) diameter, multimode
fiber-optic, with effective modal bandwidth of
200 MHz/km as detailed in TIA-492AAAC
Maximum distance: 300 m
For use with HP ProCurve 9300 2-Port 10 GbE Module
(J8174A) only.
Optic only—module sold separately.
Additional accessories
HP ProCurve Gigabit-SX-LC Mini-GBIC (J4858A) See page 62 for details.
HP ProCurve Gigabit-LX-LC Mini-GBIC (J4859A) See page 62 for details.
HP ProCurve Gigabit-LH-LC Mini-GBIC (J4860A) See page 62 for details.
Services for accessories are covered under the product in which they are installed.
15
HP ProCurve
Switch 5300xl Series
16
HP ProCurve Switch 5372xl (J4848A)
HP ProCurve Switch 5348xl (J4849A)
HP ProCurve Switch 5308xl-48G (J8167A)
HP ProCurve Switch 5304xl-32G (J8166A)
HP ProCurve Switch 5308xl (J4819A)
HP ProCurve Switch 5304xl (J4850A)
HP ProCurve Switch 5300xl Series
Designed to accommodate the most demanding network
needs, the HP ProCurve Switch 5300xl series offers scalable
layer 2, 3, and 4 switching in compact 4- or 8-slot modular
form factors. These convergence-ready switches provide
flexibility, high port density, free software updates, and
a lifetime warranty. The easy-to-use Switch 5300xl series
provides the latest in technology with unparalleled investment
protection and superior return on IT.
Features and benefits
• Non-blocking architecture: 76.8 Gbps non-blocking
crossbar switching fabric provides wire-speed intra- and
inter-module switching with up to 48 million pps
throughput built on HP custom-designed ASIC
technology
• IP layer 3 routing: provides routing of IP at media
speed; supports static routes, RIP, RIPv2, and OSPF
• Router redundancy (XRRP): allows groups of 2 routers
to dynamically back each other up to create highly
available routed environments
• IP multicast routing (PIM Dense): routes IP multicast using
the PIM Dense routing protocol
• IP multicast (data-driven IGMPv3): automatically
prevents flooding of IP multicast traffic
• HP switch meshing: dynamically load-balances across
multiple active redundant links to increase available
aggregate bandwidth
• 802.1s Multi-Instance Spanning Tree: high link
availability in multiple VLAN environments by allowing
multiple spanning trees
• 802.1w Rapid Convergence Spanning Tree Protocol:
increases network uptime through faster recovery from
failed links
• 802.3ad Link Aggregation Control Protocol (LACP)
and HP trunking: support up to 36 trunks, each with up
to 8 links (ports) per trunk; trunking across modules is
supported
• Cisco Fast EtherChannel® (FEC): supports Cisco’s
proprietary FEC trunking protocol
• Web-based authentication: similar to 802.1X,
provides a browser-based environment to authenticate
clients that do not support the 802.1X supplicant
• Access control lists (ACLs): provide IP layer 3 filtering
based on source/destination IP address/subnet and
source/destination TCP/UDP port number
• VLAN support and tagging: support complete 802.1Q
(4,096 VLAN IDs) and 256 VLANs simultaneously
• 802.1v Protocol VLANs: isolate select non-IPv4
protocols automatically into their own VLANs
• Group VLAN Registration Protocol (GVRP): allows
automatic learning and dynamic assignment of VLANs
• Port security: prevents unauthorized access using MAC
address lockdown
• MAC address lockout: prevents configured particular
MAC addresses from connecting to the network
• Source port filtering: allows only specified ports to
communicate with each other
• TACACS+ : eases switch management security
administration by using a password authentication
server
• Secure Shell (SSHv2): encrypts all transmitted data for
secure CLI remote access over IP networks
17
HP ProCurve Switch 5300xl Series
Features and benefits (continued)
• Secure Sockets Layer (SSL): encrypts all HTTP traffic,
allowing secure access to the browser-based
management GUI in the switch
• Secure FTP: allows secure file transfer to/from the
switch—protects against unwanted file downloads or
unauthorized copying of switch configuration file
• Secure access to manage the 5300xl series: all access
methods—CLI, GUI, or MIB—are securely encrypted
through SSHv2, SSL, and/or SNMPv3
• Static NAT: hide up to 32 nodes per switch from the rest
of the network through static IP address translation
• Layer 4 prioritization: enables prioritization based on
TCP/UDP ports
• Traffic prioritization (802.1p): allows real-time traffic
classification into 8 priority levels mapped to 4 queues
• Rate Limiting: per port ingress enforced maximums
and per port, per queue guaranteed minimums
• Class of Service (CoS): sets 802.1p priority tag based
on IP address, IP Type of Service (ToS), L3 protocol,
TCP/UDP port number, source port, and DiffServ
• RMON, XRMON, sFlow, and SMON: provide advanced
monitoring and reporting capabilities for statistics,
history, alarms, and events
• Cisco Discovery Protocol (CDP): enables real-time
mapping of nodes to switch ports
• Friendly port names: allow assignment of descriptive
names to ports
• HP Auto-MDIX: automatically adjusts for straight-through
or crossover cables on all 10/100 and 10/100/1000
ports
• Hot-swappable modules: permit modules and miniGBICs to be added or swapped without interrupting the
network
• Dual flash images: provide independent primary and
secondary OS files for backup while upgrading
• Optional redundant power supply: provides
uninterrupted power
• Troubleshooting: ingress/egress port monitoring enables
network problem solving
• iSCSI support: enables the deployment of Ethernet
storage area network solutions using the iSCSI standard
• Lifetime warranty: for as long as you own the product,
with next-business-day advance replacement (available
in most countries)
Services
18
• 3-year, 4-hour onsite, 13 x 5 coverage, 13 x 5 phone
support, for hardware (H4496A/E)
• Installation with minimum configuration, system-based
pricing (U4828A/E)
• 3-year, 4-hour onsite, 24 x 7 coverage, 24 x 7 phone
support, for hardware (H2893A/E)
• Installation with HP-provided configuration, system-based
pricing (U4832A/E)
• 3-year, 4-hour onsite, 24 x 7 coverage for hardware,
24 x 7 software phone support (U6319A/E)
For details about services and response times in your
area, please contact your local HP sales office.
HP ProCurve Switch 5300xl Series
Specifications
HP ProCurve Switch 5372xl (J4848A)
HP ProCurve Switch 5308xl-48G (J8167A)
HP ProCurve Switch 5308xl (J4819A)
72 10/100 ports (3 x J4820A)
5 open module slots
Supports a maximum of 192 10/100 ports
or 128 Gigabit ports, or a combination
48 10/100/1000 ports (3 x J4907A)
5 open module slots
Supports a maximum of 192 10/100 ports
or 128 Gigabit ports
8 open module slots
17.4 x 15.3 x 8.75 in. (44.2 x 38.9 x 22.23 cm)
(5U height)
31.3 lb. (14.20 kg)
17.4 x 15.3 x 8.75 in. (44.2 x 38.9 x 22.23 cm)
(5U height)
26.8 lb. (12.06 kg)
17.4 x 15.3 x 8.75 in. (44.2 x 38.9 x 22.23 cm)
(5U height)
26.8 lb. (12.16 kg)
Motorola PowerPC @ 200 MHz, 12 MB flash,
32 MB SDRAM
ARM7 @ 66 MHz, 128 KB flash, 128 KB SRAM,
18 MB RDRAM
36 MB
Dual
Motorola PowerPC @ 200 MHz, 12 MB flash,
32 MB SDRAM
ARM9 @ 66 MHz, 128 KB flash, 128 KB SRAM,
18 MB RDRAM
36 MB
Dual
Motorola PowerPC @ 200 MHz, 12 MB flash,
32 MB SDRAM
n/a
36 MB
Dual
Mounts in an EIA-standard 19 in. telco rack or
equipment cabinet (hardware included);
horizontal surface mounting only
Mounts in an EIA-standard 19 in. telco rack or
equipment cabinet (hardware included);
horizontal surface mounting only
Mounts in an EIA-standard 19 in. telco rack or
equipment cabinet (hardware included);
horizontal surface mounting only
Performance
Latency
Throughput
Switch fabric speed
Address table size
<6 µs (FIFO)
Up to 48 mpps
76.8 Gbps
10,000 entries
<6 µs (FIFO)
Up to 48 mpps
76.8 Gbps
10,000 entries
<6 µs (FIFO)
Up to 48 mpps
76.8 Gbps
10,000 entries
Environment
Operating temperature
Operating relative humidity
Non-operating/storage temperature
Non-operating/storage relative humidity
Altitude
32°F to 104°F (0°C to 40°C)
15% to 95% @ 104°F (40°C), non-condensing
–40°F to 158°F (–40°C to 70°C)
15% to 95% @ 149°F (65°C), non-condensing
Up to 15,091 ft. (4.6 km)
32°F to 104°F (0°C to 40°C)
15% to 95% @ 104°F (40°C), non-condensing
–40°F to 158°F (–40°C to 70°C)
15% to 95% @ 149°F (65°C), non-condensing
Up to 15,091 ft. (4.6 km)
32°F to 104°F (0°C to 40°C)
15% to 95% @ 104°F (40°C), non-condensing
–40°F to 158°F (–40°C to 70°C)
15% to 95% @ 149°F (65°C), non-condensing
Up to 15,091 ft. (4.6 km)
Electrical characteristics
Maximum BTUs
Voltage
Current
Power
Frequency
2,116 BTU/hr
100–127 VAC/200–240 VAC
8.2A/3.8A
620W
50/60 Hz
2,116 BTU/hr
100–127 VAC/200–240 VAC
8.2A/3.8A
620W
50/60 Hz
2,116 BTU/hr
100–127 VAC/200–240 VAC
8.2A/3.8A
620W
50/60 Hz
Safety
cUL (CSA 950); EN 60950/IEC 950;
NOM-019-SCFI-1994; UL 1950 3rd edition
cUL (CSA 950); EN 60950/IEC 950;
NOM-019-SCFI-1994; UL 1950 3rd edition
cUL (CSA 950); EN 60950/IEC 950;
NOM-019-SCFI-1994; UL 1950 3rd edition
Emissions
FCC Class A; EN 55022/CISPR 22 Class A;
VCCI Class A
FCC Class A; EN 55022/CISPR 22 Class A;
VCCI Class A
FCC Class A; EN 55022/CISPR 22 Class A;
VCCI Class A
55024/CISPR 24
IEC 61000-4-2, 4 kV CD, 8 kV AD
IEC 61000-4-3, 3V/m
IEC 61000-4-4, 1.0 kV (power line),
0.5 kV (signal line)
IEC 61000-4-5, 1 kV/2 kV AC
IEC 61000-4-6, 3V
IEC 61000-4-8, 1A/m, 50 or 60 Hz
IEC 61000-4-11, >95% reduction, 0.5 period;
30% reduction, 25 periods
EN 61000-3-2/IEC 61000-3-2
EN 61000-3-3/IEC 61000-3-3
55024/CISPR 24
IEC 61000-4-2, 4 kV CD, 8 kV AD
IEC 61000-4-3, 3V/m
IEC 61000-4-4, 1.0 kV (power line),
0.5 kV (signal line)
IEC 61000-4-5, 1 kV/2 kV AC
IEC 61000-4-6, 3V
IEC 61000-4-8, 1A/m, 50 or 60 Hz
IEC 61000-4-11, >95% reduction, 0.5 period;
30% reduction, 25 periods
EN 61000-3-2/IEC 61000-3-2
EN 61000-3-3/IEC 61000-3-3
55024/CISPR 24
IEC 61000-4-2, 4 kV CD, 8 kV AD
IEC 61000-4-3, 3V/m
IEC 61000-4-4, 1.0 kV (power line),
0.5 kV (signal line)
IEC 61000-4-5, 1 kV/2 kV AC
IEC 61000-4-6, 3V
IEC 61000-4-8, 1A/m, 50 or 60 Hz
IEC 61000-4-11, >95% reduction, 0.5 period;
30% reduction, 25 periods
EN 61000-3-2/IEC 61000-3-2
EN 61000-3-3/IEC 61000-3-3
Management
HP ProCurve Manager (included);
HP ProCurve Manager Plus;
command line interface; Web browser;
configuration menu; out-of-band management
(serial RS-232C)
HP ProCurve Manager (included);
HP ProCurve Manager Plus;
command line interface; Web browser;
configuration menu; out-of-band management
(serial RS-232C)
HP ProCurve Manager (included);
HP ProCurve Manager Plus;
command line interface; Web browser;
configuration menu; out-of-band management
(serial RS-232C)
Standards and protocols
RFC 783 TFTP; RFC 951 BootP; RFC 1542 BootP; RFC 854 Telnet; RFC 768 UDP; RFC 792 ICMP; RFC 793 TCP; RFC 826 ARP; RFC 2030 Simple Network Time Protocol;
IEEE 802.3x Flow Control; DHCP Relay; RFC 3376 IGMPv1/v2/v3; RFC 2453 RIPv2; RFC 2328 OSFPv2 (includes route authentication); IGMPv3; IEEE 802.1D Spanning Tree;
IEEE 802.1w Rapid Convergence Spanning Tree; IEEE 802.1s Multiple Spanning Trees; IEEE 802.3ad Link Aggregation Control Protocol; Cisco Fast EtherChannel® (FEC);
RFC 2474 DiffServ Precedence; RFC 2597 DiffServ Assured Forwarding (AF); RFC 2598 DiffServ Expedited Forwarding (EF); RFC 1492 TACACS+; RFC 2138 RADIUS;
RFC 2866 RADIUS accounting; SSHv1/SSHv2 Secure Shell; Secure Sockets Layer (SSL); IEEE 802.1X Network Login; IEEE 802.1Q VLAN tagging; IEEE 802.1Q GVRP;
IEEE 802.3af Power over Ethernet; SNMPv1/v2c/v3; Cisco Discovery Protocol (CDP); HTML and telnet management; RFC 1493 Bridge MIB; PIM Dense; RFC 1213 MIB II;
RFC 2096 IP Forwarding Table MIB; RFC 2737 Entity MIB; RFC 2863 Evolution of Interface; RFC 2665 Ethernet MIB; RFC 1058 RIP; RFC 1724 RIPv2 MIB; RFC 2819 Four
groups of RMON: 1 (statistics), 2 (history), 3 (alarm), and 9 (events); Extended RMON; sFlow; RFC 2021 RMON probe configuration (RMON v2); RFC 2668 802.3 MAU
MIB; RFC 2613 SMON; RFC 2674 802.1p and IEEE 802.1Q Bridge MIB; RFC 1850 OSPF MIB; RFC 2618 RADIUS Client MIB; RFC 2620 RADIUS Accounting MIB
Ports
Maximum ports
Physical characteristics
Dimensions
Weight (fully loaded)
Memory and processor
Fabric
Module
Packet buffer size
Flash capacity
Mounting
Immunity
EN
ESD
Radiated
EFT/Burst
Surge
Conducted
Power frequency magnetic field
Voltage dips and interruptions
Harmonics
Flicker
Supports a maximum of 192 10/100 ports
or 128 Gigabit ports
19
HP ProCurve Switch 5300xl Series
Specifications
HP ProCurve Switch 5348xl (J4849A)
HP ProCurve Switch 5304xl-32G (J8166A)
HP ProCurve Switch 5304xl (J4850A)
48 10/100 ports (2 x J4820A)
2 open module slots
Supports a maximum of 96 10/100 ports
or 64 Gigabit ports
32 10/100/1000 ports (2 x J4907A)
2 open module slots
Supports a maximum of 96 10/100 ports
or 64 Gigabit ports
4 open module slots
17.4 x 15.3 x 5.25 in. (44.2 x 38.9 x 13.34 cm)
(3U height)
24.85 lb. (11.27 kg)
17.4 x 15.3 x 5.25 in. (44.2 x 38.9 x 22.23 cm)
(3U height)
26.8 lb. (12.06 kg)
17.4 x 15.3 x 5.25 in. (44.2 x 38.9 x 13.34 cm)
(3U height)
21.85 lb. (9.91 kg)
Motorola PowerPC @ 200 MHz, 12 MB flash,
32 MB SDRAM
ARM7 @ 66 MHz, 128 KB flash, 128 KB SRAM,
18 MB RDRAM
36 MB
Dual
Motorola PowerPC @ 200 MHz, 12 MB flash,
32 MB SDRAM
ARM9 @ 66 MHz, 128 KB flash, 128 KB SRAM,
18 MB RDRAM
36 MB
Dual
Motorola PowerPC @ 200 MHz, 12 MB flash,
32 MB SDRAM
n/a
36 MB
Dual
Mounts in an EIA-standard 19 in. telco rack or
equipment cabinet (hardware included);
horizontal surface mounting only
Mounts in an EIA-standard 19 in. telco rack or
equipment cabinet (hardware included);
horizontal surface mounting only
Mounts in an EIA-standard 19 in. telco rack or
equipment cabinet (hardware included);
horizontal surface mounting only
Performance
Latency
Throughput
Switch fabric speed
Address table size
<6 µs (FIFO)
Up to 24 mpps
76.8 Gbps
10,000 entries
<6 µs (FIFO)
Up to 24 mpps
76.8 Gbps
10,000 entries
<6 µs (FIFO)
Up to 24 mpps
76.8 Gbps
10,000 entries
Environment
Operating temperature
Operating relative humidity
Non-operating/storage temperature
Non-operating/storage relative humidity
Altitude
32°F to 104°F (0°C to 40°C)
15% to 95% @ 104°F (40°C), non-condensing
–40°F to 158°F (–40°C to 70°C)
15% to 95% @ 149°F (65°C), non-condensing
Up to 15,091 ft. (4.6 km)
32°F to 104°F (0°C to 40°C)
15% to 95% @ 104°F (40°C), non-condensing
–40°F to 158°F (–40°C to 70°C)
15% to 95% @ 149°F (65°C), non-condensing
Up to 15,091 ft. (4.6 km)
32°F to 104°F (0°C to 40°C)
15% to 95% @ 104°F (40°C), non-condensing
–40°F to 158°F (–40°C to 70°C)
15% to 95% @ 149°F (65°C), non-condensing
Up to 15,091 ft. (4.6 km)
Electrical characteristics
Maximum BTUs
Voltage
Current
Power
Frequency
1,178 BTU/hr
100–127 VAC/200–240 VAC
8.2A/3.8A
620W
50/60 Hz
2,116 BTU/hr
100–127 VAC/200–240 VAC
8.2A/3.8A
620W
50/60 Hz
1,178 BTU/hr
100–127 VAC/200–240 VAC
8.2A/3.8A
620W
50/60 Hz
Safety
cUL (CSA 950); EN 60950/IEC 950;
NOM-019-SCFI-1994; UL 1950 3rd edition
cUL (CSA 950); EN 60950/IEC 950;
NOM-019-SCFI-1994; UL 1950 3rd edition
cUL (CSA 950); EN 60950/IEC 950;
NOM-019-SCFI-1994; UL 1950 3rd edition
Emissions
FCC Class A; EN 55022/CISPR 22 Class A;
VCCI Class A
FCC Class A; EN 55022/CISPR 22 Class A;
VCCI Class A
FCC Class A; EN 55022/CISPR 22 Class A;
VCCI Class A
55024/CISPR 24
IEC 61000-4-2, 4 kV CD, 8 kV AD
IEC 61000-4-3, 3V/m
IEC 61000-4-4, 1.0 kV (power line),
0.5 kV (signal line)
IEC 61000-4-5, 1 kV/2 kV AC
IEC 61000-4-6, 3V
IEC 61000-4-8, 1A/m, 50 or 60 Hz
IEC 61000-4-11, >95% reduction, 0.5 period;
30% reduction, 25 periods
EN 61000-3-2/IEC 61000-3-2
EN 61000-3-3/IEC 61000-3-3
55024/CISPR 24
IEC 61000-4-2, 4 kV CD, 8 kV AD
IEC 61000-4-3, 3V/m
IEC 61000-4-4, 1.0 kV (power line),
0.5 kV (signal line)
IEC 61000-4-5, 1 kV/2 kV AC
IEC 61000-4-6, 3V
IEC 61000-4-8, 1A/m, 50 or 60 Hz
IEC 61000-4-11, >95% reduction, 0.5 period;
30% reduction, 25 periods
EN 61000-3-2/IEC 61000-3-2
EN 61000-3-3/IEC 61000-3-3
55024/CISPR 24
IEC 61000-4-2, 4 kV CD, 8 kV AD
IEC 61000-4-3, 3V/m
IEC 61000-4-4, 1.0 kV (power line),
0.5 kV (signal line)
IEC 61000-4-5, 1 kV/2 kV AC
IEC 61000-4-6, 3V
IEC 61000-4-8, 1A/m, 50 or 60 Hz
IEC 61000-4-11, >95% reduction, 0.5 period;
30% reduction, 25 periods
EN 61000-3-2/IEC 61000-3-2
EN 61000-3-3/IEC 61000-3-3
Management
HP ProCurve Manager (included);
HP ProCurve Manager Plus;
command line interface; Web browser;
configuration menu; out-of-band management
(serial RS-232C)
HP ProCurve Manager (included);
HP ProCurve Manager Plus;
command line interface; Web browser;
configuration menu; out-of-band management
(serial RS-232C)
HP ProCurve Manager (included);
HP ProCurve Manager Plus;
command line interface; Web browser;
configuration menu; out-of-band management
(serial RS-232C)
Standards and protocols
RFC 783 TFTP; RFC 951 BootP; RFC 1542 BootP; RFC 854 Telnet; RFC 768 UDP; RFC 792 ICMP; RFC 793 TCP; RFC 826 ARP; RFC 2030 Simple Network Time Protocol;
IEEE 802.3x Flow Control; DHCP Relay; RFC 3376 IGMPv1/v2/v3; RFC 2453 RIPv2; RFC 2328 OSFPv2 (includes route authentication); IGMPv3; IEEE 802.1D Spanning Tree;
IEEE 802.1w Rapid Convergence Spanning Tree; IEEE 802.1s Multiple Spanning Trees; IEEE 802.3ad Link Aggregation Control Protocol; Cisco Fast EtherChannel® (FEC);
RFC 2474 DiffServ Precedence; RFC 2597 DiffServ Assured Forwarding (AF); RFC 2598 DiffServ Expedited Forwarding (EF); RFC 1492 TACACS+; RFC 2138 RADIUS;
RFC 2866 RADIUS accounting; SSHv1/SSHv2 Secure Shell; Secure Sockets Layer (SSL); IEEE 802.1X Network Login; IEEE 802.1Q VLAN tagging; IEEE 802.1Q GVRP;
IEEE 802.3af Power over Ethernet; SNMPv1/v2c/v3; Cisco Discovery Protocol (CDP); HTML and telnet management; RFC 1493 Bridge MIB; PIM Dense; RFC 1213 MIB II;
RFC 2096 IP Forwarding Table MIB; RFC 2737 Entity MIB; RFC 2863 Evolution of Interface; RFC 2665 Ethernet MIB; RFC 1058 RIP; RFC 1724 RIPv2 MIB; RFC 2819 Four
groups of RMON: 1 (statistics), 2 (history), 3 (alarm), and 9 (events); Extended RMON; sFlow; RFC 2021 RMON probe configuration (RMON v2); RFC 2668 802.3 MAU
MIB; RFC 2613 SMON; RFC 2674 802.1p and IEEE 802.1Q Bridge MIB; RFC 1850 OSPF MIB; RFC 2618 RADIUS Client MIB; RFC 2620 RADIUS Accounting MIB
Ports
Maximum ports
Physical characteristics
Dimensions
Weight (fully loaded)
Memory and processor
Fabric
Module
Packet buffer size
Flash capacity
Mounting
Immunity
EN
ESD
Radiated
EFT/Burst
Surge
Conducted
Power frequency magnetic field
Voltage dips and interruptions
Harmonics
Flicker
20
Supports a maximum of 96 10/100 ports
or 64 Gigabit ports
HP ProCurve Switch xl Modules and RPS
HP ProCurve Switch xl 10/100-TX Module (J4820A)
with 24 auto-sensing 10/100 ports
Ports
24 auto-sensing 10/100 ports (IEEE 802.3 Type
10Base-T; 802.3u Type 100Base-TX)
Connector: RJ-45
HP Auto-MDIX: yes
Duplex: half or full
Physical characteristics
Dimensions: 8.97 x 8.0 x 1.75 in.
(22.78 x 20.32 x 4.45 cm)
Weight: 1.76 lb. (0.79 kg)
HP ProCurve Switch xl 100/1000-T Module (J4821A)
with 4 auto-sensing 100/1000 ports
Ports
4 auto-sensing 100/1000 ports (IEEE 802.3u Type
100Base-TX; 802.3ab Type 1000Base-T)
Connector: RJ-45
HP Auto-MDIX: yes
Duplex:
• 100Base-TX: half or full
• 1000Base-T: full
Physical characteristics
Dimensions: 8.97 x 8.0 x 1.75 in.
(22.78 x 20.32 x 4.45 cm)
Weight: 1.5 lb. (0.68 kg)
Ports
4 open mini-GBIC slots
HP ProCurve Switch xl Mini-GBIC Module (J4878A)
with 4 open mini-GBIC slots
Physical characteristics
Dimensions: 8.97 x 8.0 x 1.75 in.
(22.78 x 20.32 x 4.45 cm)
Weight: 1.44 lb. (0.65 kg)
Ports
12 100Base-FX ports (IEEE 802.3u Type 100Base-FX)
Connector: MTRJ
Duplex: half or full
HP ProCurve Switch xl 100-FX MTRJ Module (J4852A)
with 12 100Base-FX MTRJ ports
Services for accessories are covered under the product in which they are installed.
Physical characteristics
Dimensions: 8.97 x 8.0 x 1.75 in.
(22.78 x 20.32 x 4.45 cm)
Weight: 1.95 lb. (0.88 kg)
Cabling
Type:
• 10Base-T: Category 3 (or better), 100Ω differential
unshielded twisted pair (UTP) or shielded twisted
pair (STP), complying with IEEE 802.3 Type 10Base-T
specifications
• 100Base-TX: Category 5 (or better), 100Ω
differential unshielded twisted pair (UTP) or shielded
twisted pair (STP), complying with IEEE 802.3u
100Base-TX
Maximum distance: 100m
Cabling
Type:
• 100Base-TX: Category 5 (or better), 100Ω
differential unshielded twisted pair (UTP) or shielded
twisted pair (STP), complying with IEEE 802.3u
100Base-TX
• 1000Base-T: Category 5 (5E or better recommended),
100Ω differential 4-pair unshielded twisted pair
(UTP) or shielded twisted pair (STP) balanced,
complying with IEEE 802.3ab 1000Base-T
Maximum distance: 100m
Mini-GBICs supported (ordered separately)
• J4858A HP ProCurve Gigabit-SX-LC mini-GBIC
• J4859A HP ProCurve Gigabit-LX-LC mini-GBIC
• J4860A HP ProCurve Gigabit-LH-LC mini-GBIC
Cabling
Type: 62.5/125 µm or 50/125 µm (core/cladding)
diameter, graded-index, multimode fiber-optic,
complying with ITU-T G.651 and ISO/IEC 793-2
Type A1b or A1a, respectively
Maximum distance: 2 km (full-duplex) or 412m
(half-duplex)
21
HP ProCurve Switch xl Modules and RPS
HP ProCurve Switch xl 16-port 10/100/1000 Module
(J4907A)
with 14 auto-sensing 10/100/1000 ports and 2 dual-personality ports
(10/100/1000 or mini-GBIC)
Cabling
Type: 10Base-T: Category 3 (or better) 100 Ω
differential unshielded twisted pair (UTP) or shielded
twisted pair (STP), complying with IEEE 802.3 Type
10Base-T specifications
100BaseTX: Category 5 (or better), 100 Ω differential
unshielded twisted pair (UTP) or shielded twisted pair
(STP), complying with IEEE 802.3u 100Base-TX
1000Base-T: Category 5 (5E or better recommended),
100 Ω differentiated 4-pair unshielded twisted pair
(UTP) or shielded twisted pair (STP) balanced,
complying with IEEE 802.3ab 1000Base-T
Maximum distance: 100m
Ports
14 auto-sensing 10/100/1000 ports
(IEEE 802.3 Type 10Base-T; 802.3u Type
100Base-TX; 802.3ab Type 1000Base-T)
2 dual-personality ports (10/100/1000 or
mini-GBIC)
Connector: RJ-45
HP Auto-MDIX: yes
Duplex: half or full
Physical characteristics
Dimensions: 8.98 x 7.99 x 1.75 in.
(22.8 x 20.3 x 4.45 cm)
Weight: 1.24 lb. (0.56 kg)
Mini-GBICs supported (ordered separately)
• J4858A HP ProCurve Gigabit-SX-LC mini-GBIC
• J4859A HP ProCurve Gigabit-LX-LC mini-GBIC
• J4860A HP ProCurve Gigabit-LH-LC mini-GBIC
Notes
The J4907A module can also be used in:
• HP ProCurve Switch 5304xl
• HP ProCurve Switch 5348xl
• HP ProCurve Switch 5372xl
Ports
24 RJ-45 10/100 ports (IEEE 802.3 Type 10Base-T,
IEEE 802.3u Type 100Base-TX)
Connector: RJ-45
HP Auto-MDIX: yes
Duplex: half or full
Physical characteristics
Dimensions: 8.97 x 8 x 1.75 in.
(22.78 x 20.32 x 4.45 cm)
Weight: 2.23 lb. (1 kg)
Physical characteristics
Dimensions: 7.9 x 6.3 x 5 in. (20.07 x 16 x 12.7 cm)
Weight: 5.55 lb. (2.5 kg)
For additional RPS specification information, see the
data sheet for the product in which the RPS is being
installed.
HP ProCurve Switch xl 10/100-TX PoE Module
(J8161A)
Note
Requires HP ProCurve 600 EPS/RPS or 610 EPS to
supply PoE power
with 24 auto-sensing 10/100 IEEE 802.3af PoE-ready ports
HP ProCurve Switch gl/xl Redundant Power Supply
(J4839A)
not pictured
Electrical characteristics
• Voltage: 100–120 VAC/200–240 VAC
• Current: 8.2A/3.8A
• Frequency: 50/60 Hz
Additional accessories
HP ProCurve Gigabit-SX-LC Mini-GBIC (J4858A) See page 62 for details.
HP ProCurve Gigabit-LX-LC Mini-GBIC (J4859A) See page 62 for details.
HP ProCurve Gigabit-LH-LC Mini-GBIC (J4860A) See page 62 for details.
HP ProCurve 600 Redundant and External Power Supply (J8168A) See page 65 for details.
HP ProCurve 610 External Power Supply (J8169A) See page 65 for details.
22
Services for accessories are covered under the product in which they are installed.
HP ProCurve Switch 4100gl Series
HP ProCurve Switch 4160gl (J8152A)
HP ProCurve Switch 4140gl (J8151A)
HP ProCurve Switch 4108gl bundle
(J4861A)
HP ProCurve Switch 4148gl (J4888A)
HP ProCurve Switch 4108gl (J4865A)
HP ProCurve Switch 4104gl (J4887A)
23
HP ProCurve Switch 4100gl Series
The HP ProCurve Switch 4100gl series is convergence-ready
and easy to use in compact 8-slot and 4-slot modular form
factors. Based on HP Fast Path Technology, these switches
provide reliable, high-performance, high-density 10 Mbit,
100 Mbit, or Gigabit connectivity for a growing network.
The Switch 4100gl series is the low-cost, modular alternative
to stackable switches and includes a lifetime warranty.
Features and benefits
• Basic IP routing: enables automatic routing with up
to 16 external routes—including one default route—
in IP networks
• Traffic prioritization (802.1p): allows real-time traffic
classification into 8 priority levels mapped to 3 queues
• Fast Path Technology: wire-speed switching of intramodule traffic for up to 71.4 million pps throughput
• Fast switch fabric: high-performance switch fabric
(up to 36.6 Gbps)
• Hot-swappable modules: permit modules and miniGBICs to be added or swapped without interrupting
the network
24
• Dual flash images: provide independent primary and
secondary OS files for backup while upgrading
• Optional redundant power supply: provides
uninterrupted power
• VLAN support and tagging: support complete 802.1Q
(4,096 VLAN IDs) and 256 VLANs simultaneously
• 802.3ad Link Aggregation Control Protocol (LACP)
and HP trunking: support up to 6 trunks, each with
up to 4 links (ports) per trunk; trunking across modules
is supported
HP ProCurve Switch 4100gl Series
Features and benefits (continued)
• Port security: prevents unauthorized access using
MAC address lockdown
• TACACS+ : eases switch management security
administration by using a password authentication
server
• Secure Shell (SSHv2): encrypts all transmitted data for
secure remote access over IP networks
• Secure Sockets Layer (SSL): encrypts all HTTP traffic,
allowing secure access to the browser-based
management GUI in the switch
• Secure access to manage the 4100gl series: all access
methods—CLI, GUI, or MIB—are securely encrypted
through SSHv2, SSL, and/or SNMPv2
• HP Auto-MDIX: automatically adjusts for straight-through
or crossover cables on all 10/100 and 10/100/1000
ports
• Stacking capability: single IP address management
for a virtual stack of up to 16 switches, including the
2500 series, 2600 series, 2800 series, 4000m, 6108,
8000m, and 4100gl series
• Lifetime warranty: for as long as you own the product,
with next-business-day advance replacement (available
in most countries)
Services
HP ProCurve Switch 4108gl and Switch 4108gl Bundle
HP ProCurve Switch 4104gl and Switch 4148gl
• 3-year, 4-hour onsite, 13 x 5 coverage, 13 x 5 phone
support, for hardware (H7675A/E)
• 3-year, 4-hour onsite, 13 x 5 coverage, 13 x 5 phone
support, for hardware (U2855A/E)
• 3-year, 4-hour onsite, 24 x 7 coverage, 24 x 7 phone
support, for hardware (H7676A/E)
• 3-year, 4-hour onsite, 24 x 7 coverage, 24 x 7 phone
support, for hardware (U2856A/E)
• 3-year, 4-hour onsite, 24 x 7 coverage for hardware,
24 x 7 software phone support (U6320A/E)
• 3-year, 4-hour onsite, 24 x 7 coverage for hardware,
24 x 7 software phone support (U6304A/E)
• Installation with minimum configuration, system-based
pricing (U4827A/E)
• Installation with minimum configuration, system-based
pricing (U4827A/E)
• Installation with HP-provided configuration, system-based
pricing (U4831A/E)
• Installation with HP-provided configuration, system-based
pricing (U4831A/E)
For details about services and response times in your
area, please contact your local HP sales office.
25
HP ProCurve Switch 4100gl Series
Specifications
HP ProCurve Switch 4160gl (J8152A)
HP ProCurve Switch 4108gl bundle (J4861A)
HP ProCurve Switch 4108gl (J4865A)
60 RJ-45 10/100/1000 ports (3 x J4908A),
6 mini-GBIC slots
5 open module slots
Supports a maximum of 192 10/100 ports
or 160 Gigabit ports and 16 mini-GBICs,
or a combination
72 10/100 ports (3 x J4862B),
3 transceiver ports (1 x J4864A)
4 open module slots
Supports a maximum of 192 10/100 ports
or 160 Gigabit ports and 16 mini-GBICs,
or a combination
8 open module slots
17.4 x 15.3 x 8.75 in. (44.2 x 38.9 x 22.23 cm)
(5U height)
30.6 lb. (13.9 kg)
17.4 x 15.3 x 8.75 in. (44.2 x 38.9 x 22.23 cm)
(5U height)
22.9 lb. (10.4 kg)
17.4 x 15.3 x 8.75 in. (44.2 x 38.9 x 22.23 cm)
(5U height)
20.7 lb. (9.4 kg)
Motorola PowerPC @ 200 MHz, 8 MB flash,
32 MB SDRAM
IDT MIPS32 @ 125 MHz, 512 KB flash,
512 KB SRAM
1 MB
Motorola PowerPC @ 200 MHz, 8 MB flash,
32 MB SDRAM
IDT MIPS32 @ 125 MHz, 512 KB flash,
512 KB SRAM
1 MB
Motorola PowerPC @ 200 MHz, 8 MB flash,
32 MB SDRAM
IDT MIPS32 @ 125 MHz, 512 KB flash,
512 KB SRAM
1 MB
Mounts in an EIA-standard 19 in. telco rack or
equipment cabinet (hardware included);
horizontal surface mounting only
Mounts in an EIA-standard 19 in. telco rack or
equipment cabinet (hardware included);
horizontal surface mounting only
Mounts in an EIA-standard 19 in. telco rack or
equipment cabinet (hardware included);
horizontal surface mounting only
Performance
Latency
Throughput
Switch fabric speed
Address table size
<10.2 µs (FIFO 64-byte packets)
Up to 71.4 mpps
36.6 Gbps
8,000 entries
<10.2 µs (FIFO 64-byte packets)
Up to 71.4 mpps
36.6 Gbps
8,000 entries
<10.2 µs (FIFO 64-byte packets)
Up to 71.4 mpps
36.6 Gbps
8,000 entries
Environment
Operating temperature
Operating relative humidity
Non-operating/storage temperature
Non-operating/storage relative humidity
Altitude
32°F to 131°F (0°C to 55°C)
15% to 95% @ 104°F (40°C), non-condensing
–40°F to 158°F (–40°C to 70°C)
15% to 95% @ 149°F (65°C), non-condensing
Up to 15,091 ft. (4.6 km)
32°F to 131°F (0°C to 55°C)
15% to 95% @ 104°F (40°C), non-condensing
–40°F to 158°F (–40°C to 70°C)
15% to 95% @ 149°F (65°C), non-condensing
Up to 15,091 ft. (4.6 km)
32°F to 131°F (0°C to 55°C)
15% to 95% @ 104°F (40°C), non-condensing
–40°F to 158°F (–40°C to 70°C)
15% to 95% @ 149°F (65°C), non-condensing
Up to 15,091 ft. (4.6 km)
Electrical characteristics
Maximum BTUs
Voltage
Current
Power
Frequency
2,152 BTU/hr
100–127 VAC/200–240 VAC
8.2A/3.8A
630W
50/60 Hz
2,152 BTU/hr
100–127 VAC/200–240 VAC
8.2A/3.8A
630W
50/60 Hz
2,152 BTU/hr
100–127 VAC/200–240 VAC
8.2A/3.8A
630W
50/60 Hz
Safety
cUL (CSA 950); EN 60950/IEC 950;
NOM-019-SCFI-1994; UL 1950 3rd edition
cUL (CSA 950); EN 60950/IEC 950;
NOM-019-SCFI-1994; UL 1950 3rd edition
cUL (CSA 950); EN 60950/IEC 950;
NOM-019-SCFI-1994; UL 1950 3rd edition
Emissions
FCC Class A; EN 55022/CISPR 22 Class A;
VCCI Class A
FCC Class A; EN 55022/CISPR 22 Class A;
VCCI Class A
FCC Class A; EN 55022/CISPR 22 Class A;
VCCI Class A
55024/CISPR 24
IEC 61000-4-2, 4 kV CD, 8 kV AD
IEC 61000-4-3, 3V/m
IEC 61000-4-4, 1.0 kV (power line),
0.5 kV (signal line)
IEC 61000-4-5, 1 kV/2 kV AC
IEC 61000-4-6, 3V
IEC 61000-4-8, 1A/m, 50 or 60 Hz
IEC 61000-4-11, >95% reduction, 0.5 period;
30% reduction, 25 periods
EN 61000-3-2/IEC 61000-3-2
EN 61000-3-3/IEC 61000-3-3
55024/CISPR 24
IEC 61000-4-2, 4 kV CD, 8 kV AD
IEC 61000-4-3, 3V/m
IEC 61000-4-4, 1.0 kV (power line),
0.5 kV (signal line)
IEC 61000-4-5, 1 kV/2 kV AC
IEC 61000-4-6, 3V
IEC 61000-4-8, 1A/m, 50 or 60 Hz
IEC 61000-4-11, >95% reduction, 0.5 period;
30% reduction, 25 periods
EN 61000-3-2/IEC 61000-3-2
EN 61000-3-3/IEC 61000-3-3
55024/CISPR 24
IEC 61000-4-2, 4 kV CD, 8 kV AD
IEC 61000-4-3, 3V/m
IEC 61000-4-4, 1.0 kV (power line),
0.5 kV (signal line)
IEC 61000-4-5, 1 kV/2 kV AC
IEC 61000-4-6, 3V
IEC 61000-4-8, 1A/m, 50 or 60 Hz
IEC 61000-4-11, >95% reduction, 0.5 period;
30% reduction, 25 periods
EN 61000-3-2/IEC 61000-3-2
EN 61000-3-3/IEC 61000-3-3
Management
HP ProCurve Manager (included);
HP ProCurve Manager Plus;
command line interface; Web browser;
configuration menu; out-of-band management
(serial RS-232C)
HP ProCurve Manager (included);
HP ProCurve Manager Plus;
command line interface; Web browser;
configuration menu; out-of-band management
(serial RS-232C)
HP ProCurve Manager (included);
HP ProCurve Manager Plus;
command line interface; Web browser;
configuration menu; out-of-band management
(serial RS-232C)
Standards and protocols
RFC 783 TFTP; RFC 951 BootP; RFC 1542 BootP; RFC 854 Telnet; RFC 768 UDP; RFC 792 ICMP; RFC 793 TCP; RFC 826 ARP; RFC 2030 Simple Network Time Protocol;
IEEE 802.3x Flow Control; DHCP Relay; RFC 2236 IGMPv1/v2; IEEE 802.1D Spanning Tree; IEEE 802.1w Rapid Convergence Spanning Tree; IEEE 802.3ad Link Aggregation
Control Protocol; Cisco Fast EtherChannel® (FEC); RFC 1492 TACACS+; RFC 2138 RADIUS; RFC 2866 RADIUS accounting; SSHv1/SSHv2 Secure Shell; Secure Sockets Layer
(SSL); IEEE 802.1X Network Login; IEEE 802.1Q VLAN tagging; IEEE 802.1Q GVRP; IEEE 802.1p Priority; SNMPv1/v2c/v3; HTML and telnet management; RFC 1493 Bridge
MIB; RFC 1213 MIB II; RFC 2096 IP Forwarding Table MIB; RFC 2737 Entity MIB; RFC 2863 Evolution of Interface; RFC 2665 Ethernet MIB; RFC 2819 Four groups of RMON:
1 (statistics), 2 (history), 3 (alarm), and 9 (events); RFC 2021 RMON probe configuration (RMON v2); RFC 2668 802.3 MAU MIB; RFC 2613 SMON; RFC 2674 802.1p and
IEEE 802.1Q Bridge MIB; RFC 2618 RADIUS Client MIB; RFC 2620 RADIUS Accounting MIB
Ports
Maximum ports
Physical characteristics
Dimensions
Weight (fully loaded)
Memory and processor
Fabric
Module
Packet buffer size
Mounting
Immunity
EN
ESD
Radiated
EFT/Burst
Surge
Conducted
Power frequency magnetic field
Voltage dips and interruptions
Harmonics
Flicker
26
Supports a maximum of 192 10/100 ports
or 160 Gigabit ports and 16 mini-GBICs,
or a combination
HP ProCurve Switch 4100gl Series
Specifications
HP ProCurve Switch 4140gl (J8151A)
HP ProCurve Switch 4148gl (J4888A)
HP ProCurve Switch 4104gl (J4887A)
40 RJ-45 10/100/1000 ports (2 x J4908A),
4 mini-GBIC slots
2 open module slots
Supports a maximum of 96 10/100 ports
or 80 Gigabit ports and 8 mini-GBICs
48 10/100 ports (2 x J4862B)
2 open module slots
4 open module slots
Supports a maximum of 96 10/100 ports
or 80 Gigabit ports and 8 mini-GBICs
Supports a maximum of 96 10/100 ports
or 80 Gigabit ports and 8 mini-GBICs
17.4 x 15.3 x 5.25 in. (44.2 x 38.9 x 13.34 cm)
(3U height)
22.9 lb. (10.4 kg)
17.4 x 15.3 x 5.25 in. (44.2 x 38.9 x 13.34 cm)
(3U height)
15.84 lb. (7.13kg)
17.4 x 15.3 x 5.25 in. (44.2 x 38.9 x 13.34 cm)
(3U height)
14.75 lb. (6.7 kg)
Motorola PowerPC @ 200 MHz, 8 MB flash,
32 MB SDRAM
IDT MIPS32 @ 125 MHz, 512 KB flash,
8 MB SDRAM
512 KB
Motorola PowerPC @ 200 MHz, 8 MB flash,
32 MB SDRAM
IDT MIPS32 @ 125 MHz, 512 KB flash,
8 MB SDRAM
512 KB
Motorola PowerPC @ 200 MHz, 8 MB flash,
32 MB SDRAM
IDT MIPS32 @ 125 MHz, 512 KB flash,
8 MB SDRAM
512 KB
Mounts in an EIA-standard 19 in. telco rack or
equipment cabinet (hardware included);
horizontal surface mounting only
Mounts in an EIA-standard 19 in. telco rack or
equipment cabinet (hardware included);
horizontal surface mounting only
Mounts in an EIA-standard 19 in. telco rack or
equipment cabinet (hardware included);
horizontal surface mounting only
Performance
Latency
Throughput
Switch fabric speed
Address table size
<10.2 µs (FIFO 64-byte packets)
Up to 71.4 mpps
36.6 Gbps
8,000 entries
<10.2 µs (FIFO 64-byte packets)
Up to 35.7 mpps
18.3 Gbps
8,000 entries
<10.2 µs (FIFO 64-byte packets)
Up to 35.7 mpps
18.3 Gbps
8,000 entries
Environment
Operating temperature
Operating relative humidity
Non-operating/storage temperature
Non-operating/storage relative humidity
Altitude
32°F to 131°F (0°C to 55°C)
15% to 95% @ 104°F (40°C), non-condensing
–40°F to 158°F (–40°C to 70°C)
15% to 95% @ 149°F (65°C), non-condensing
Up to 15,091 ft. (4.6 km)
32°F to 131°F (0°C to 55°C)
15% to 95% @ 104°F (40°C), non-condensing
–40°F to 158°F (–40°C to 70°C)
15% to 95% @ 149°F (65°C), non-condensing
Up to 15,091 ft. (4.6 km)
32°F to 131°F (0°C to 55°C)
15% to 95% @ 104°F (40°C), non-condensing
–40°F to 158°F (–40°C to 70°C)
15% to 95% @ 149°F (65°C), non-condensing
Up to 15,091 ft. (4.6 km)
Electrical characteristics
Maximum BTUs
Voltage
Current
Power
Frequency
2,152 BTU/hr
100–127 VAC/200–240 VAC
8.2A/3.8A
630W
50/60 Hz
2,152 BTU/hr
100–127 VAC/200–240 VAC
8.2A/3.8A
630W
50/60 Hz
2,152 BTU/hr
100–127 VAC/200–240 VAC
8.2A/3.8A
630W
50/60 Hz
Safety
cUL (CSA 950); EN 60950/IEC 950;
NOM-019-SCFI-1994; UL 1950 3rd edition
cUL (CSA 950); EN 60950/IEC 950;
NOM-019-SCFI-1994; UL 1950 3rd edition
cUL (CSA 950); EN 60950/IEC 950;
NOM-019-SCFI-1994; UL 1950 3rd edition
Emissions
FCC Class A; EN 55022/CISPR 22 Class A;
VCCI Class A
FCC Class A; EN 55022/CISPR 22 Class A;
VCCI Class A
FCC Class A; EN 55022/CISPR 22 Class A;
VCCI Class A
55024/CISPR 24
IEC 61000-4-2, 4 kV CD, 8 kV AD
IEC 61000-4-3, 3V/m
IEC 61000-4-4, 1.0 kV (power line),
0.5 kV (signal line)
IEC 61000-4-5, 1 kV/2 kV AC
IEC 61000-4-6, 3V
IEC 61000-4-8, 1A/m, 50 or 60 Hz
IEC 61000-4-11, >95% reduction, 0.5 period;
30% reduction, 25 periods
EN 61000-3-2/IEC 61000-3-2
EN 61000-3-3/IEC 61000-3-3
55024/CISPR 24
IEC 61000-4-2, 4 kV CD, 8 kV AD
IEC 61000-4-3, 3V/m
IEC 61000-4-4, 1.0 kV (power line),
0.5 kV (signal line)
IEC 61000-4-5, 1 kV/2 kV AC
IEC 61000-4-6, 3V
IEC 61000-4-8, 1A/m, 50 or 60 Hz
IEC 61000-4-11, >95% reduction, 0.5 period;
30% reduction, 25 periods
EN 61000-3-2/IEC 61000-3-2
EN 61000-3-3/IEC 61000-3-3
55024/CISPR 24
IEC 61000-4-2, 4 kV CD, 8 kV AD
IEC 61000-4-3, 3V/m
IEC 61000-4-4, 1.0 kV (power line),
0.5 kV (signal line)
IEC 61000-4-5, 1 kV/2 kV AC
IEC 61000-4-6, 3V
IEC 61000-4-8, 1A/m, 50 or 60 Hz
IEC 61000-4-11, >95% reduction, 0.5 period;
30% reduction, 25 periods
EN 61000-3-2/IEC 61000-3-2
EN 61000-3-3/IEC 61000-3-3
Management
HP ProCurve Manager (included);
HP ProCurve Manager Plus;
command line interface; Web browser;
configuration menu; out-of-band management
(serial RS-232C)
HP ProCurve Manager (included);
HP ProCurve Manager Plus;
command line interface; Web browser;
configuration menu; out-of-band management
(serial RS-232C)
HP ProCurve Manager (included);
HP ProCurve Manager Plus;
command line interface; Web browser;
configuration menu; out-of-band management
(serial RS-232C)
Standards and protocols
RFC 783 TFTP; RFC 951 BootP; RFC 1542 BootP; RFC 854 Telnet; RFC 768 UDP; RFC 792 ICMP; RFC 793 TCP; RFC 826 ARP; RFC 2030 Simple Network Time Protocol;
IEEE 802.3x Flow Control; DHCP Relay; RFC 2236 IGMPv1/v2/v3; IEEE 802.1D Spanning Tree; IEEE 802.1w Rapid Convergence Spanning Tree; IEEE 802.3ad Link
Aggregation Control Protocol; Cisco Fast EtherChannel® (FEC); RFC 1492 TACACS+; RFC 2138 RADIUS; RFC 2866 RADIUS accounting; SSHv1/SSHv2 Secure Shell;
Secure Sockets Layer (SSL); IEEE 802.1X Network Login; IEEE 802.1Q VLAN tagging; IEEE 802.1Q GVRP; IEEE 802.1p Priority; SNMPv1/v2c/v3; HTML and telnet
management; RFC 1493 Bridge MIB; RFC 1213 MIB II; RFC 2096 IP Forwarding Table MIB; RFC 2737 Entity MIB; RFC 2863 Evolution of Interface; RFC 2665 Ethernet MIB;
RFC 2819 Four groups of RMON: 1 (statistics), 2 (history), 3 (alarm), and 9 (events); RFC 2021 RMON probe configuration (RMON v2); RFC 2668 802.3 MAU MIB;
RFC 2613 SMON; RFC 2674 802.1p and IEEE 802.1Q Bridge MIB; RFC 2618 RADIUS Client MIB; RFC 2620 RADIUS Accounting MIB
Ports
Maximum ports
Physical characteristics
Dimensions
Weight (fully loaded)
Memory and processor
Fabric
Module
Packet buffer size
Mounting
Immunity
EN
ESD
Radiated
EFT/Burst
Surge
Conducted
Power frequency magnetic field
Voltage dips and interruptions
Harmonics
Flicker
27
HP ProCurve Switch gl Modules and RPS
HP ProCurve Switch gl 10/100/1000 Module (J4908A)
with 20 10/100/1000 ports and 2 mini-GBIC slots
Ports
20 auto-sensing 10/100/1000 ports (IEEE 802.3 Type
10Base-T; 802.3u Type 100Base-TX; 802.3ab Type
1000Base-T)
2 open mini-GBIC slots
Connector: RJ-45
HP Auto-MDIX: yes
Duplex: half or full
Physical characteristics
Dimensions: 8.97 x 8.0 x 1.75 in.
(22.78 x 20.32 x 4.45 cm)
Weight: 1.25 lb. (0.567 kg)
Mini-GBICs supported (ordered separately)
• J4858A HP ProCurve Gigabit-SX-LC mini-GBIC
• J4859A HP ProCurve Gigabit-LX-LC mini-GBIC
• J4860A HP ProCurve Gigabit-LH-LC mini-GBIC
HP ProCurve Switch gl 10/100-TX Module (J4862B)
Ports
24 auto-sensing 10/100 ports (IEEE 802.3 Type
10Base-T; 802.3u Type 100Base-TX)
Connector: RJ-45
HP Auto-MDIX: yes
Duplex: half or full
with 24 auto-sensing 10/100 ports
Physical characteristics
Dimensions: 8.97 x 8.0 x 1.75 in.
(22.78 x 20.32 x 4.45 cm)
Weight: 1.24 lb. (0.56 kg)
with 6 open mini-GBIC slots
HP ProCurve Switch gl 100/1000-T Module (J4863A)
with 6 auto-sensing 100/1000 ports
Physical characteristics
Dimensions: 8.97 x 8.0 x 1.75 in.
(22.78 x 20.32 x 4.45 cm)
Weight: 0.96 lb. (0.43 kg)
Ports
6 auto-sensing 100/1000 ports (IEEE 802.3u Type
100Base-TX; 802.3ab Type 1000Base-T)
Connector: RJ-45
HP Auto-MDIX: yes
Duplex:
• 100Base-TX: half or full
• 1000Base-T: full
Physical characteristics
Dimensions: 8.97 x 8.0 x 1.75 in.
(22.78 x 20.32 x 4.45 cm)
Weight: 1.0 lb. (0.45 kg)
28
Cabling
Type:
• 10Base-T: Category 3 (or better), 100Ω differential
unshielded twisted pair (UTP) or shielded twisted
pair (STP), complying with IEEE 802.3 Type 10Base-T
specifications
• 100Base-TX: Category 5 (or better), 100Ω
differential unshielded twisted pair (UTP) or shielded
twisted pair (STP), complying with IEEE 802.3u
100Base-TX
Maximum distance: 100m
Mini-GBICs supported (ordered separately)
• J4858A HP ProCurve Gigabit-SX-LC mini-GBIC
• J4859A HP ProCurve Gigabit-LX-LC mini-GBIC
• J4860A HP ProCurve Gigabit-LH-LC mini-GBIC
Ports
6 open mini-GBIC slots
HP ProCurve Switch gl Mini-GBIC Module (J4893A)
Cabling
Type:
• 10Base-T: Category 3 (or better), 100Ω differential
unshielded twisted pair (UTP) or shielded twisted
pair (STP), complying with IEEE 802.3 Type 10Base-T
specifications
• 100Base-TX: Category 5 (or better), 100Ω
differential unshielded twisted pair (UTP) or shielded
twisted pair (STP), complying with IEEE 802.3u
100Base-TX
• 1000Base-T: Category 5 (5E or better
recommended), 100Ω differential 4-pair unshielded
twisted pair (UTP) or shielded twisted pair (STP)
balanced, complying with IEEE 802.3ab 1000Base-T
Maximum distance: 100m
Cabling
Type:
• 100Base-TX: Category 5 (or better), 100Ω differential
unshielded twisted pair (UTP) or shielded twisted
pair (STP), complying with IEEE 802.3u 100Base-TX
• 1000Base-T: Category 5 (5E or better
recommended), 100Ω differential 4-pair unshielded
twisted pair (UTP) or shielded twisted pair (STP)
balanced, complying with IEEE 802.3ab 1000Base-T
Maximum distance: 100m
Services for accessories are covered under the product in which they are installed.
HP ProCurve Switch gl Modules and RPS
Ports
3 open transceiver slots
HP ProCurve Switch gl Transceiver Module (J4864A)
with 3 open transceiver slots
Physical characteristics
Dimensions: 8.97 x 8.0 x 1.75 in.
(22.78 x 20.32 x 4.45 cm)
Weight: 1.16 lb. (0.52 kg)
Ports
12 100Base-FX ports (IEEE 802.3u Type 100Base-FX)
Connector: MTRJ
Duplex: half or full
HP ProCurve Switch gl 100-FX MTRJ Module (J4892A)
with 12 100Base-FX MTRJ ports
HP ProCurve Switch gl/xl Redundant Power Supply
(J4839A)
not pictured
Physical characteristics
Dimensions: 8.97 x 8.0 x 1.75 in.
(22.78 x 20.32 x 4.45 cm)
Weight: 1.45 lb. (0.65 kg)
Physical characteristics
Dimensions: 7.9 x 6.3 x 5 in.
(20.07 x 16 x 12.7 cm)
Weight: 5.55 lb. (2.5 kg)
Transceivers supported (ordered separately)
• J4116A HP ProCurve Gigabit stacking kit
• J4131B HP ProCurve Gigabit-SX transceiver
• J4132A HP ProCurve Gigabit-LX transceiver
• J4834A HP ProCurve 100/1000-T transceiver
• J4853A HP ProCurve 100-FX SC transceiver
Cabling
Type: 62.5/125 µm or 50/125 µm (core/cladding)
diameter, graded-index, multimode fiber-optic,
complying with ITU-T G.651 and ISO/IEC 793-2
Type A1b or A1a, respectively
Maximum distance: 2 km (full-duplex) or 412m
(half-duplex)
For additional RPS specification information, see the
data sheet for the product in which the RPS is being
installed.
Electrical characteristics
• Voltage: 100–127 VAC/200–240 VAC
• Current: 8.2A/3.8A
• Frequency range: 50/60 Hz
Additional accessories
HP ProCurve Gigabit-SX-LC Mini-GBIC (J4858A) See page 62 for details.
HP ProCurve Gigabit-LX-LC Mini-GBIC (J4859A) See page 62 for details.
HP ProCurve Gigabit-LH-LC Mini-GBIC (J4860A) See page 62 for details.
HP ProCurve Switch Gigabit Stacking Kit (J4116A) See page 63 for details.
HP ProCurve Gigabit SX Transceiver (J4131B) See page 63 for details.
HP ProCurve Gigabit LX Transceiver (J4132B) See page 63 for details.
HP ProCurve 100/1000-T Transceiver (J4834A) See page 64 for details.
HP ProCurve 100-FX SC Transceiver (J4853A) See page 64 for details.
Services for accessories are covered under the product in which they are installed.
29
HP ProCurve Switch 6108
HP ProCurve Switch 6108 (J4902A)
The HP ProCurve Switch 6108 is a low-cost, stackable, multi-layer,
managed 8-port switch with 6 auto-sensing 10/100/1000 ports
and 2 dual-personality ports for 10/100/1000 or mini-GBIC
connectivity. With layer 3 basic IP routing, industry-leading lifetime
warranty, and free end-user telephone and e-mail support, the
Switch 6108 is ideal for access tier aggregation with 2 optional
Gigabit fiber uplinks to connect at distances up to 70 km.
Features and benefits
• 16 Gbps backplane: non-blocking architecture for wirespeed throughput
• Dual-personality functionality: two 10/100/1000 ports
or mini-GBIC slots for optional fiber connectivity such as
Gigabit-SX, -LX, or -LH
• Basic IP routing: enables automatic routing with up to
16 external routes—including one default route—in IP
networks
30
• Rapid Convergence Spanning Tree Protocol (802.1w):
increases network uptime through faster recovery from
failed links
• 802.3ad Link Aggregation Control Protocol (LACP) and
HP trunking: support up to 6 trunks, each with up to
4 links (ports) per trunk; trunking across modules is
supported
• Cisco Fast EtherChannel® (FEC): supports Cisco’s
proprietary FEC trunking protocol
HP ProCurve Switch 6108
Features and benefits (continued)
• 802.1X and RADIUS network login: control port-based
access for authentication and accountability
• Port security: prevents unauthorized access using MAC
address lockdown
• TACACS+ : eases switch management security
administration by using a password authentication
server
• Secure Shell (SSHv2): encrypts all transmitted data for
secure remote access over IP networks
• Secure Sockets Layer (SSL): encrypts all HTTP traffic,
allowing secure access to the browser-based
management GUI in the switch
• VLAN: supports up to 30 port-based VLANs, GVRP,
and 802.1Q VLAN tagging
• Traffic prioritization (802.1p): allows real-time traffic
classification into 8 priority levels mapped to 4 queues
• RMON and SMON: provide advanced monitoring
and reporting capabilities for statistics, history, alarms,
and events
• Stacking capability: single IP address management
for a virtual stack of up to 16 switches, including the
2500 series, 2600 series, 2800 series, 4000m, 6108,
8000m, and 4100gl series
• HP Auto-MDIX: automatically adjusts for straight-through
or crossover cables on all 10/100/1000 ports
• Group VLAN Registration Protocol (GVRP): allows
automatic learning and dynamic assignment of VLANs
• Cisco Discovery Protocol (CDP): enables real-time
mapping of nodes to switch ports
• Friendly port names: allow assignment of descriptive
names to ports
• Secure access to manage the switch 6108: all access
methods—CLI, GUI, or MIB—are securely encrypted
through SSHv2, SSL, and/or SNMPv3
• Lifetime warranty: for as long as you own the product,
with next-business-day advance replacement (available
in most countries)
Accessories
HP ProCurve Gigabit-SX-LC Mini-GBIC (J4858A) See page 62 for details.
HP ProCurve Gigabit-LX-LC Mini-GBIC (J4859A) See page 62 for details.
HP ProCurve Gigabit-LH-LC Mini-GBIC (J4860A) See page 62 for details.
31
HP ProCurve Switch 6108
Services
• 3-year, 4-hour onsite, 13 x 5 coverage, 13 x 5 phone
support, for hardware (H5481A/E)
• Installation with minimum configuration, system-based
pricing (U4826A/E)
• 3-year, 4-hour onsite, 24 x 7 coverage, 24 x 7 phone
support, for hardware (U6303A/E)
• Installation with HP-provided configuration, system-based
pricing (U4830A/E)
• 3-year, 4-hour onsite, 24 x 7 coverage for hardware,
24 x 7 software phone support (U6302A/E)
For details about services and response times in your
area, please contact your local HP sales office.
Specifications
Ports
6 RJ-45 10/100/1000 ports (IEEE
802.3 Type 10Base-T; 802.3u
Type 100Base-TX; 802.3ab
1000Base-T Gigabit Ethernet)
2 dual-personality ports—can be
used as either 2 additional RJ-45
10/100/1000 ports, 2 open
mini-GBIC slots (for use with
mini-GBIC transceivers), or one
of each
Physical characteristics
Dimensions: 17.42 x 9.3 x 1.73 in.
(44.25 x 23.7 x 4.4 cm)
(1U height)
Weight: 6.96 lb. (3.16 kg)
Memory and processor
Processor: Motorola MPC8245
PowerPC
Flash capacity: 16 MB
Mounting
Mounts in a standard 19 in. rack
(hardware included)
32
Performance
Latency: <12.5 µs (LIFO 64-byte
packets)
Throughput: 11.9 mpps
(64-byte packets)
Switching capacity: 16 Gbps
Address table size: 8,000
Environment
Operating
– Temperature: 32ºF to 131ºF
(0ºC to 55ºC)
– Relative humidity: 15% to 95% @
104ºF (40ºC), non-condensing
Non-operating/Storage
– Temperature: –40ºF to 158ºF
(–40ºC to 70ºC)
– Relative humidity: 15% to 95% @
149ºF (65ºC)
Altitude: up to 15,091 ft. (4.6 km)
Electrical characteristics
Maximum BTUs: 341 BTU/hr
Voltage: 100–240 VAC
Current: 1.5A
Power: 100W
Frequency: 50/60 Hz
Safety
EN 60950/IEC 950
UL 1950 3rd edition
cUL (CSA 950)
NOM-019-SCFI-1994
Emissions
FCC Class A
EN 55022/CISPR 22 Class A
VCCI Class A
Immunity
EN 55024/CISPR 24
ESD: IEC 61000-4-2, 4 kV CD,
8 kV AD
Radiated: IEC 61000-4-3, 3V/m
EFT/Burst: IEC 61000-4-4, 1.0 kV
(power line), 0.5 kV (signal line)
Surge: IEC 61000-4-5,
1 kV/2 kV AC
Conducted: IEC 61000-4-6, 3V
Power frequency magnetic field:
IEC 61000-4-8, 1A/m,
50 or 60 Hz
Voltage dips and interruptions:
IEC 61000-4-11, >95% reduction,
0.5 period; 30% reduction, 25
periods
Harmonics: EN 61000-3-2/IEC
61000-3-2
Flicker: EN 61000-3-3/IEC
61000-3-3
Management
HP ProCurve Manager (included);
command line interface; Web
browser; configuration menu;
out-of-band management
(serial RS-232C)
Standards and protocols
RFC 783 TFTP
RFC 951 BootP
RFC 1542 BootP
RFC 854 Telnet
RFC 768 UDP
RFC 792 ICMP
RFC 793 TCP
RFC 826 ARP
RFC 2030 Simple Network Time
Protocol
IEEE 802.3x Flow Control
RFC 2236 IGMPv1/v2
IEEE 802.1D Spanning Tree
IEEE 802.1w Rapid Convergence
Spanning Tree
IEEE 802.3ad Link Aggregation
Control Protocol
Cisco Fast EtherChannel® (FEC)
SSHv1/v2* Secure Shell
Secure Sockets Layer (SSL)
IEEE 802.1X Network Login
IEEE 802.1p Priority
IEEE 802.1Q GVRP
SNMPv1/v2c/v3
Cisco Discovery Protocol (CDP)
HTML and telnet management
RFC 1493 Bridge MIB
RFC 1213 MIB II
RFC 2096 IP Forwarding Table
MIB
RFC 2737 Entity MIB
RFC 2863 Evolution of Interface
RFC 2665 Ethernet MIB
RFC 2819 Four groups of RMON:
1 (statistics), 2 (history),
3 (alarm), and 9 (events)
RFC 2021 RMON probe
configuration (RMON v2)
RFC 2668 802.3 MAU MIB
RFC 2613 SMON
RFC 2674 802.1p and IEEE
802.1Q Bridge MIB
RFC 2618 RADIUS Client MIB
RFC 2620 RADIUS Accounting MIB
HP ProCurve Switch 2800 Series
HP ProCurve Switch 2848 (J4904A)
HP ProCurve Switch 2824 (J4903A)
The HP ProCurve Switch 2800 series consists of two switches: the 24-port
HP ProCurve Switch 2824 with 20 10/100/1000 ports, and the 48-port
HP ProCurve Switch 2848 with 44 10/100/1000 ports. In addition,
each switch has 4 dual-personality ports for 10/100/1000 or mini-GBIC
connectivity. Ideal for medium to large networks, the Switch 2824 and
Switch 2848 cost-effectively offer the maximum in bandwidth performance
with 10 times the speed of 100 Mbit switches. Migrating to Gigabit switches
will allow you to take full advantage of your existing high-performance,
Gigabit-enabled PCs, laptops, and servers—and see noticeably improved
application response and file transfer times. By implementing the Switch
2824 or Switch 2848, you will seamlessly protect your existing network
investment while preparing for future growth.
33
HP Procurve Switch 2800 Series
Features and benefits
• 48 Gbps backplane with up to 35.7 mpps (Switch 2824)
and 96 Gbps backplane with up to 71.4 mpps (Switch
2848): ten times the bandwidth for low-latency
throughput
• Dual-personality functionality: four 10/100/1000 ports
or mini-GBIC slots for optional fiber connectivity such as
Gigabit-SX, -LX, or -LH
• Basic IP routing: enables automatic routing with up
to 16 external routes—including one default route—
in IP networks
• IP multicast (data-driven IGMPv3): automatically
prevents flooding of IP multicast traffic
• 802.3ad Link Aggregation Protocol (LACP) and
HP trunking: support up to 24 trunks, each with
up to 8 links (ports) per trunk; trunking across
modules is supported
• Optional external redundant power supply: provides
uninterrupted power; sold as an accessory
• RMON, XRMON, and SMON: provide advanced
monitoring and reporting capabilities for statistics,
history, alarms, and events
• Port security: prevents unauthorized access using
MAC address lockdown
• TACACS+ : eases switch management security
administration by using a password authentication
server
34
• Secure Shell (SSHv2): encrypts all transmitted data for
secure remote access over IP networks
• Secure Sockets Layer (SSL): encrypts all HTTP traffic,
allowing secure access to the browser-based
management GUI in the switch
• VLAN support and tagging: support complete 802.1Q
(4,096 VLAN IDs) and 256 VLANs simultaneously
• Traffic prioritization (802.1p): allows real-time traffic
classification into 8 priority levels mapped to 4 queues
• Per-port broadcast throttling: selectively configure
broadcast control on heavy traffic port uplinks
• Stacking capability: single IP address management
for a virtual stack of up to 16 switches, including the
2500 series, 2600 series, 2800 series, 4000m, 6108,
8000m, and 4100gl series
• HP Auto-MDIX: automatically adjusts for straight-through
or crossover cables on all 10/100/1000 ports
• Source port filters: allows only specified ports to
communicate with each other
• Troubleshooting: ingress/egress port monitoring enables
network problem solving
• iSCSI support: enables the deployment of Ethernet
storage area network solutions using the iSCSI standard
• Lifetime warranty: for as long as you own the product,
with next-business-day advance replacement (available
in most countries)
HP ProCurve Switch 2800 Series
Accessories
HP ProCurve Gigabit-SX-LC Mini-GBIC (J4858A) See page 62 for details.
HP ProCurve Gigabit-LX-LC Mini-GBIC (J4859A) See page 62 for details.
HP ProCurve Gigabit-LH-LC Mini-GBIC (J4860A) See page 62 for details.
HP ProCurve 600 Redundant and External Power Supply (J8168A) See page 65 for details.
HP ProCurve 610 External Power Supply (J8169A) See page 65 for details.
Services
HP ProCurve Switch 2848
HP ProCurve Switch 2824
• 3-year, 4-hour onsite, 13 x 5 coverage, 13 x 5 phone
support, for hardware (H4496A/E)
• 3-year, 4-hour onsite, 13 x 5 coverage, 13 x 5 phone
support, for hardware (U2855A/E)
• 3-year, 4-hour onsite, 24 x 7 coverage, 24 x 7 phone
support, for hardware (H2893A/E)
• 3-year, 4-hour onsite, 24 x 7 coverage, 24 x 7 phone
support, for hardware (U2856A/E)
• 3-year, 4-hour onsite, 24 x 7 coverage for hardware,
24 x 7 software phone support (U6319A/E)
• 3-year, 4-hour onsite, 24 x 7 coverage for hardware,
24 x 7 software phone support (U6304A/E)
• Installation with minimum configuration, system-based
pricing (U4826A/E)
• Installation with minimum configuration, system-based
pricing (U4826A/E)
• Installation with HP-provided configuration, system-based
pricing (U4830A/E)
• Installation with HP-provided configuration, system-based
pricing (U4830A/E)
For details about services and response times in your
area, please contact your local HP sales office.
35
HP ProCurve Switch 2800 Series
Specifications
Ports
Physical characteristics
Dimensions
Weight (fully loaded)
Memory and processor
Flash capacity
HP ProCurve Switch 2848 (J4904A)
HP ProCurve Switch 2824 (J4903A)
44 RJ-45 10/100/1000 ports (IEEE 802.3 Type 10Base-T,
IEEE 802.3u Type 100Base-TX, 1000Base-T Gigabit
Ethernet)
1 RS-232C DB-9 console port
4 dual-personality ports—each port can be used as
either an RJ-45 10/100/1000 port or an open
mini-GBIC slot (for use with mini-GBIC transceivers)
20 RJ-45 10/100/1000 ports (IEEE 802.3 Type 10Base-T,
IEEE 802.3u Type 100Base-TX, 1000Base-T Gigabit
Ethernet)
1 RS-232C DB-9 console port
4 dual-personality ports—each port can be used as
either an RJ-45 10/100/1000 port or an open
mini-GBIC slot (for use with mini-GBIC transceivers)
17.32 x 16.9 x 1.75 in. (43.99 x 42.93 x 4.45 cm)
(1U height)
10.75 lb. (4.84 kg)
17.32 x 14.4 x 1.75 in. (43.99 x 36.58 x 4.45 cm)
(1U height)
10.2 lb. (4.59 kg)
16 MB
16 MB
Mounts in an EIA-standard 19 in. telco rack or
equipment cabinet (hardware included);
horizontal surface mounting only
Mounts in an EIA-standard 19 in. telco rack or
equipment cabinet (hardware included);
horizontal surface mounting only
Performance
Latency
Throughput
Switching capacity
Address table size
<11.8 µs (FIFO)
Up to 71.4 mpps
96 Gbps
16,000 entries
<11.5 µs
Up to 35.7 mpps
48 Gbps
16,000 entries
Environment
Operating temperature
Operating relative humidity
Non-operating/storage temperature
Non-operating/storage relative humidity
Altitude
Acoustic
32°F to 131°F (0°C to 55°C)
15% to 95% @ 104°F (40°C), non-condensing
–40°F to 158°F (–40°C to 70°C)
15% to 95% @ 149°F (65°C), non-condensing
Up to 15,091 ft. (4.6 km)
DIN 45635T.19 per ISO 7779 <53dB @ <80ºF (25ºC)
32°F to 131°F (0°C to 55°C)
15% to 95% @ 104°F (40°C), non-condensing
–40°F to 158°F (–40°C to 70°C)
15% to 95% @ 149°F (65°C), non-condensing
Up to 15,091 ft. (4.6 km)
DIN 45635T.19 per ISO 7779 <53dB @ <80ºF (25ºC)
Electrical characteristics
Maximum BTUs
Voltage
Current
Power
Frequency
341 BTU/hr
100–127 VAC/200–240 VAC
0.6A/0.3A
100W
50/60 Hz
341 BTU/hr
100–127 VAC/200–240 VAC
0.6A/0.3A
100W
50/60 Hz
Safety
cUL (CSA 950); EN 60950/IEC 950;
NOM-019-SCFI-1994; UL 1950 3rd edition
cUL (CSA 950); EN 60950/IEC 950;
NOM-019-SCFI-1994; UL 1950 3rd edition
Emissions
FCC Class A; EN 55022/CISPR 22 Class A;
VCCI Class A
FCC Class A; EN 55022/CISPR 22 Class A;
VCCI Class A
55024/CISPR 24
IEC 61000-4-2, 4 kV CD, 8 kV AD
IEC 61000-4-3, 3V/m
IEC 61000-4-4, 1.0 kV (power line),
0.5 kV (signal line)
IEC 61000-4-5, 1 kV/2 kV AC
IEC 61000-4-6, 3V
IEC 61000-4-8, 1A/m, 50 or 60 Hz
IEC 61000-4-11, >95% reduction, 0.5 period;
30% reduction, 25 periods
EN 61000-3-2/IEC 61000-3-2
EN 61000-3-3/IEC 61000-3-3
55024/CISPR 24
IEC 61000-4-2, 4 kV CD, 8 kV AD
IEC 61000-4-3, 3V/m
IEC 61000-4-4, 1.0 kV (power line),
0.5 kV (signal line)
IEC 61000-4-5, 1 kV/2 kV AC
IEC 61000-4-6, 3V
IEC 61000-4-8, 1A/m, 50 or 60 Hz
IEC 61000-4-11, >95% reduction, 0.5 period;
30% reduction, 25 periods
EN 61000-3-2/IEC 61000-3-2
EN 61000-3-3/IEC 61000-3-3
Management
HP ProCurve Manager (included);
HP ProCurve Manager Plus;
command line interface; Web browser;
configuration menu; out-of-band management
(serial RS-232C)
HP ProCurve Manager (included);
HP ProCurve Manager Plus;
command line interface; Web browser;
configuration menu; out-of-band management
(serial RS-232C)
Standards and protocols
RFC 783 TFTP; RFC 951 BootP; RFC 1542 BootP; RFC 854 Telnet; RFC 768 UDP; RFC 792 ICMP; RFC 793 TCP; RFC 826 ARP; RFC 2030 Simple Network Time Protocol;
IEEE 802.3x Flow Control; DHCP Relay; RFC 3376 IGMPv1/v2/v3; IEEE 802.1D Spanning Tree; IEEE 802.1w Rapid Convergence Spanning Tree; IEEE 802.3ad Link
Aggregation Control Protocol; Cisco Fast EtherChannel® (FEC); RFC 1492 TACACS+; RFC 2138 RADIUS; RFC 2866 RADIUS accounting; SSHv2 Secure Shell; Secure Sockets
Layer (SSL); IEEE 802.1X Network Login; Bridge MIB; IEEE 802.1Q VLANs; IEEE 802.1Q VLAN tagging; IEEE 802.1Q GVRP; IEEE 802.1p Priority; SNMPv1/v2c/v3;
Cisco Discovery Protocol (CDP); HTML and telnet management; RFC 1493 Bridge MIB; RFC 1213 MIB II; RFC 2096 IP Forwarding Table MIB; RFC 2737 Entity MIB;
RFC 2863 Evolution of Interface; RFC 2665 Ethernet MIB; RFC 2819 Four groups of RMON: 1 (statistics), 3 (alarm), and 9 (events); Extended RMON; RFC 2021 RMON
probe configuration (RMON v2); RFC 2668 802.3 MAU MIB; RFC 2613 SMON; RFC 2674 802.1p and IEEE 802.1Q Bridge MIB; RFC 2618 RADIUS Client MIB; RFC 2620
RADIUS Accounting MIB
Mounting
Immunity
EN
ESD
Radiated
EFT/Burst
Surge
Conducted
Power frequency magnetic field
Voltage dips and interruptions
Harmonics
Flicker
36
HP ProCurve Switch 2600 Series
HP ProCurve Switch 2650 (J4899A)
HP ProCurve Switch 2650-PWR (J8165A)
HP ProCurve Switch 2626 (J4900A)
HP ProCurve Switch 2626-PWR (J8164A)
The HP ProCurve Switch 2600 Series is a collection of
low-cost, stackable, multi-layer, managed 50- or 26-port
switches with 48 or 24 auto-sensing 10/100 ports and
2 dual-personality ports for 10/100/1000 or mini-GBIC
connectivity. The HP Switch 2650-PWR and 2626-PWR
are IEEE 802.3af compliant for Power over Ethernet and
provide up to 15.4W per port. A redundant and external
power supply is also available as an accessory.
37
HP ProCurve Switch 2600 Series
Features and benefits
• Power over Ethernet (IEEE 802.3af) compliant
(Switch 2650-PWR/Switch 2626-PWR): provides up to
15.4W per port to power IP phones, wireless access
points, Web cameras, and more (2650-PWR may
require an external power supply to provide full
15.4W for all 48 PoE-ready ports)
• 13.6 Gbps (2650 and 2650-PWR)/9.6 Gbps (2626
and 2626-PWR) backplane: wire-speed non-blocking
architecture for low latency throughput
• Optional external redundant power supply (Switch
2650-PWR/Switch 2626-PWR): provides uninterrupted
power; sold as an accessory
• Dual-personality functionality: two 10/100/1000 ports
or mini-GBIC slots for optional fiber connectivity such as
Gigabit-SX, -LX, or -LH
• Basic IP routing: enables automatic routing with up to
16 external routes—including one default route—in
IP networks
• Rapid Convergence Spanning Tree Protocol (802.1w):
increases network uptime through faster recovery from
failed links
• 802.3ad Link Aggregation Control Protocol (LACP) and
HP trunking: support up to 6 trunks, each with up to
4 links (ports) per trunk; trunking across modules is
supported
• Cisco Fast EtherChannel® (FEC): supports Cisco’s
proprietary FEC trunking protocol
• 802.1X and RADIUS network login: control port-based
access for authentication and accountability
• Port security: prevents unauthorized access using MAC
address lockdown
• TACACS+ : eases switch management security
administration by using a password authentication
server
38
• Secure Shell (SSH): encrypts all transmitted data for
secure remote access over IP networks
• Secure Sockets Layer (SSL): encrypts all HTTP traffic,
allowing secure access to the browser-based
management GUI in the switch
• VLAN: supports up to 30 port-based VLANs, GVRP,
and 802.1Q VLAN tagging
• Traffic prioritization (802.1p): allows real-time traffic
classification into 8 priority levels mapped to 4 queues
• RMON and SMON: provide advanced monitoring
and reporting capabilities for statistics, history, alarms,
and events
• Stacking capability: single IP address management
for a virtual stack of up to 16 switches, including the
2500 series, 2600 series, 2800 series, 4000m, 6108,
8000m, and 4100gl series
• HP Auto-MDIX: automatically adjusts for straight-through
or crossover cables on all 10/100 and 10/100/1000
ports
• Group VLAN Registration Protocol (GVRP): allows
automatic learning and dynamic assignment of VLANs
• Cisco Discovery Protocol (CDP): enables real-time
mapping of nodes to switch ports
• Friendly port names: allow assignment of descriptive
names to ports
• Secure access to manage the switches: all access
methods—CLI, GUI, or MIB—are securely encrypted
through SSHv2, SSL, and/or SNMPv3
• Lifetime warranty: for as long as you own the product,
with next-business-day advance replacement (available
in most countries)
HP ProCurve Switch 2600 Series
Accessories
HP ProCurve Gigabit-SX-LC Mini-GBIC (J4858A) See page 62 for details.
HP ProCurve Gigabit-LX-LC Mini-GBIC (J4859A) See page 62 for details.
HP ProCurve Gigabit-LH-LC Mini-GBIC (J4860A) See page 62 for details.
HP ProCurve 600 Redundant and External Power Supply (J8168A) (2650-PWR and 2626-PWR only)
See page 65 for details.
HP ProCurve 610 External Power Supply (J8169A) (2650-PWR and 2626-PWR only) See page 65 for details.
Services
HP ProCurve Switch 2650:
• 3-year, 4-hour onsite, 13 x 5 coverage, 13 x 5 phone
support, for hardware (U9270A/E)
• 3-year, 4-hour onsite, 24 x 7 coverage, 24 x 7 phone
support, for hardware (U9271A/E)
• 3-year, 4-hour onsite, 24 x 7 coverage for hardware,
24 x 7 software phone support (U6301A/E)
• Installation with minimum configuration, system-based
pricing (U4826A/E)
• Installation with HP-provided configuration, system-based
pricing (U4830A/E)
HP ProCurve Switch 2650-PWR:
• 3-year, 4-hour onsite, 13 x 5 coverage, 13 x 5 phone
support, for hardware (H4496A/E)
• 3-year, 4-hour onsite, 24 x 7 coverage, 24 x 7 phone
support, for hardware (H2893A/E)
• 3-year, 4-hour onsite, 24 x 7 coverage for hardware,
24 x 7 software phone support (U6319A/E)
• Installation with minimum configuration, system-based
pricing (U4826A/E)
• Installation with HP-provided configuration, system-based
pricing (U4830A/E)
HP ProCurve Switch 2626:
• 3-year, 4-hour onsite, 13 x 5 coverage, 13 x 5 phone
support, for hardware (H5484A/E)
• 3-year, 4-hour onsite, 24 x 7 coverage, 24 x 7 phone
support, for hardware (U6300A/E)
• 3-year, 4-hour onsite, 24 x 7 coverage for hardware,
24 x 7 software phone support (U6299A/E)
• Installation with minimum configuration, system-based
pricing (U4826A/E)
• Installation with HP-provided configuration, system-based
pricing (U4830A/E)
HP ProCurve Switch 2626-PWR:
• 3-year, 4-hour onsite, 13 x 5 coverage, 13 x 5 phone
support, for hardware (U2855A/E)
• 3-year, 4-hour onsite, 24 x 7 coverage, 24 x 7 phone
support, for hardware (U2856A/E)
• 3-year, 4-hour onsite, 24 x 7 coverage for hardware,
24 x 7 software phone support (U6304A/E)
• Installation with minimum configuration, system-based
pricing (U4826A/E)
• Installation with HP-provided configuration, system-based
pricing (U4830A/E)
For details about services and response times in your
area, please contact your local HP sales office.
39
HP ProCurve Switch 2600 Series
Specifications
Ports
Physical characteristics
Dimensions
Weight (fully loaded)
Memory and processor
Flash capacity
HP ProCurve Switch 2650 (J4899A)
HP ProCurve Switch 2650-PWR (J8165A)
48 RJ-45 10/100 ports (IEEE 802.3 Type 10Base-T,
IEEE 802.3u Type 100Base-TX)
2 dual-personality ports—each port can be used as
either an RJ-45 10/100/1000 port or an open
mini-GBIC slot (for use with mini-GBIC transceivers)
48 RJ-45 10/100 ports (IEEE 802.3 Type 10Base-T,
IEEE 802.3u Type 100Base-TX)
2 dual-personality ports—each port can be used as
either an RJ-45 10/100/1000 port (IEEE 802.3
Type 10Base-T; 802.3u Type 100Base-TX;
802.3ab 1000Base-T Gigabit Ethernet) or an open
mini-GBIC slot (for use with mini-GBIC transceivers)
17.32 x 12.8 x 1.75 in. (43.99 x 32.51 x 4.45 cm)
(1U height)
9.78 lb. (4.4 kg)
18.03 x 17.42 x 1.75 in. (45.8 x 44.25 x 4.45 cm)
(1U height)
16.31 lb. (7.34 kg)
16 MB
16 MB
Mounts in an EIA-standard 19 in. telco rack or
equipment cabinet (hardware included);
horizontal surface mounting only
Mounts in an EIA-standard 19 in. telco rack or
equipment cabinet (hardware included);
horizontal surface mounting only
Performance
Latency
Throughput
Switching capacity
Address table size
<12 µs (LIFO)
10.1 mpps
13.6 Gbps
8,000 entries
<12 µs (LIFO)
10.1 mpps
13.6 Gbps
8,000 entries
Environment
Operating temperature
Operating relative humidity
Non-operating/storage temperature
Non-operating/storage relative humidity
Altitude
32°F to 131°F (0°C to 55°C)
15% to 95% @ 104°F (40°C), non-condensing
–40°F to 158°F (–40°C to 70°C)
15% to 95% @ 149°F (65°C), non-condensing
Up to 15,091 ft. (4.6 km)
32°F to 122°F (0°C to 50°C)
15% to 95% @ 104°F (40°C), non-condensing
–40°F to 158°F (–40°C to 70°C)
15% to 95% @ 149°F (65°C), non-condensing
Up to 15,091 ft. (4.6 km)
Electrical characteristics
Maximum BTUs
Voltage
Current
Power
Frequency
341 BTU/hr
100–120 VAC/200–240 VAC
1.5A
100W
50/60 Hz
2,288 BTU/hr
100–120 VAC/200–240 VAC
6.4A
631W
50/60 Hz
Safety
cUL (CSA 950); EN 60950/IEC 950;
NOM-019-SCFI-1994; UL 1950 3rd edition
cUL (CSA 950); EN 60950/IEC 950;
NOM-019-SCFI-1994; UL 1950 3rd edition
Emissions
FCC Class A; EN 55022/CISPR 22 Class A;
VCCI Class A
FCC Class A; EN 55022/CISPR 22 Class A;
VCCI Class A
55024/CISPR 24
IEC 61000-4-2, 4 kV CD, 8 kV AD
IEC 61000-4-3, 3V/m
IEC 61000-4-4, 1.0 kV (power line),
0.5 kV (signal line)
IEC 61000-4-5, 1 kV/2 kV AC
IEC 61000-4-6, 3V
IEC 61000-4-8, 1A/m, 50 or 60 Hz
IEC 61000-4-11, >95% reduction, 0.5 period;
30% reduction, 25 periods
EN 61000-3-2/IEC 61000-3-2
EN 61000-3-3/IEC 61000-3-3
55024/CISPR 24
IEC 61000-4-2, 4 kV CD, 8 kV AD
IEC 61000-4-3, 3V/m
IEC 61000-4-4, 1.0 kV (power line),
0.5 kV (signal line)
IEC 61000-4-5, 1 kV/2 kV AC
IEC 61000-4-6, 3V
IEC 61000-4-8, 1A/m, 50 or 60 Hz
IEC 61000-4-11, >95% reduction, 0.5 period;
30% reduction, 25 periods
EN 61000-3-2/IEC 61000-3-2
EN 61000-3-3/IEC 61000-3-3
Management
HP ProCurve Manager (included);
HP ProCurve Manager Plus;
command line interface; Web browser;
configuration menu; out-of-band management
(serial RS-232C)
HP ProCurve Manager (included);
HP ProCurve Manager Plus;
command line interface; Web browser;
configuration menu; out-of-band management
(serial RS-232C)
Standards and protocols
RFC 783 TFTP; RFC 951 BootP; RFC 1542 BootP; RFC 854 Telnet; RFC 768 UDP; RFC 792 ICMP; RFC 793 TCP; RFC 826 ARP; RFC 2030 Simple Network Time Protocol;
IEEE 802.3x Flow Control; RFC 2236 IGMPv1/v2; IEEE 802.1D Spanning Tree; IEEE 802.1w Rapid Convergence Spanning Tree; IEEE 802.3ad Link Aggregation Control
Protocol; IEEE 802.3af PoE; Cisco Fast EtherChannel (FEC); SSHv1/v2 Secure Shell; Secure Sockets Layer (SSL); IEEE 802.1X Network Login; IEEE 802.1p Priority; IEEE
802.1Q GVRP; SNMPv1/v2c/v3; Cisco Discovery Protocol (CDP); HTML and telnet management; RFC 1493 Bridge MIB; RFC 1213 MIB II; RFC 2096 IP Forwarding Table
MIB; RFC 2737 Entity MIB; RFC 2863 Evolution of Interface; RFC 2665 Ethernet MIB; RFC 2819 Four groups of RMON: 1 (statistics), 2 (history), 3 (alarm), and 9 (events);
RFC 2021 RMON probe configuration (RMON v2); RFC 2668 802.3 MAU MIB; RFC 2613 SMON; RFC 2674 802.1p and IEEE 802.1Q Bridge MIB; RFC 2618 RADIUS
Client MIB; RADIUS Accounting MIB
Mounting
Immunity
EN
ESD
Radiated
EFT/Burst
Surge
Conducted
Power frequency magnetic field
Voltage dips and interruptions
Harmonics
Flicker
40
HP ProCurve Switch 2600 Series
Specifications
Ports
Physical characteristics
Dimensions
Weight (fully loaded)
Memory and processor
Flash capacity
HP ProCurve Switch 2626 (J4900A)
HP ProCurve Switch 2626-PWR (J8164A)
24 RJ-45 10/100 ports (IEEE 802.3 Type 10Base-T,
IEEE 802.3u Type 100Base-TX)
2 dual-personality ports—each port can be used as
either an RJ-45 10/100/1000 port (IEEE 802.3
Type 10Base-T; 802.3u Type 100Base-TX;
802.3ab 1000Base-T Gigabit Ethernet) or an open
mini-GBIC slot (for use with mini-GBIC transceivers)
24 RJ-45 10/100 ports (IEEE 802.3 Type 10Base-T,
IEEE 802.3u Type 100Base-TX)
2 dual-personality ports—each port can be used as
either an RJ-45 10/100/1000 port (IEEE 802.3
Type 10Base-T; 802.3u Type 100Base-TX;
802.3ab 1000Base-T Gigabit Ethernet) or an open
mini-GBIC slot (for use with mini-GBIC transceivers)
17.32 x 12.8 x 1.73 in. (44 x 32.5 x 4.4 cm)
(1U height)
9.15 lb. (4.15 kg)
18.03 x 17.42 x 1.75 in. (45.8 x 44.25 x 4.45 cm)
(1U height)
11.5 lb. (5.18 kg)
16 MB
16 MB
Mounts in an EIA-standard 19 in. telco rack or
equipment cabinet (hardware included);
horizontal surface mounting only
Mounts in an EIA-standard 19 in. telco rack or
equipment cabinet (hardware included);
horizontal surface mounting only
Performance
Latency
Throughput
Switching capacity
Address table size
<12 µs (LIFO)
Up to 6.6 mpps
9.6 Gbps
8,000 entries
<12 µs (LIFO)
Up to 6.6 mpps
9.6 Gbps
8,000 entries
Environment
Operating temperature
Operating relative humidity
Non-operating/storage temperature
Non-operating/storage relative humidity
Altitude
32°F to 131°F (0°C to 55°C)
15% to 95% @ 104°F (40°C), non-condensing
–40°F to 158°F (–40°C to 70°C)
15% to 95% @ 149°F (65°C), non-condensing
Up to 15,091 ft. (4.6 km)
32°F to 122°F (0°C to 50°C)
15% to 95% @ 104°F (40°C), non-condensing
–40°F to 158°F (–40°C to 70°C)
15% to 95% @ 149°F (65°C), non-condensing
Up to 15,091 ft. (4.6 km)
Electrical characteristics
Maximum BTUs
Voltage
Current
Power
Frequency
341 BTU/hr
100–120 VAC/200–240 VAC
1.5A
100W
50/60 Hz
2,288 BTU/hr
100–120 VAC/200–240 VAC
6.4A
631W
50/60 Hz
Safety
cUL (CSA 950); EN 60950/IEC 950;
NOM-019-SCFI-1994; UL 1950 3rd edition
cUL (CSA 950); EN 60950/IEC 950;
NOM-019-SCFI-1994; UL 1950 3rd edition
Emissions
FCC Class A; EN 55022/CISPR 22 Class A;
VCCI Class A
FCC Class A; EN 55022/CISPR 22 Class A;
VCCI Class A
55024/CISPR 24
IEC 61000-4-2, 4 kV CD, 8 kV AD
IEC 61000-4-3, 3V/m
IEC 61000-4-4, 1.0 kV (power line),
0.5 kV (signal line)
IEC 61000-4-5, 1 kV/2 kV AC
IEC 61000-4-6, 3V
IEC 61000-4-8, 1A/m, 50 or 60 Hz
IEC 61000-4-11, >95% reduction, 0.5 period;
30% reduction, 25 periods
EN 61000-3-2/IEC 61000-3-2
EN 61000-3-3/IEC 61000-3-3
55024/CISPR 24
IEC 61000-4-2, 4 kV CD, 8 kV AD
IEC 61000-4-3, 3V/m
IEC 61000-4-4, 1.0 kV (power line),
0.5 kV (signal line)
IEC 61000-4-5, 1 kV/2 kV AC
IEC 61000-4-6, 3V
IEC 61000-4-8, 1A/m, 50 or 60 Hz
IEC 61000-4-11, >95% reduction, 0.5 period;
30% reduction, 25 periods
EN 61000-3-2/IEC 61000-3-2
EN 61000-3-3/IEC 61000-3-3
Management
HP ProCurve Manager (included);
HP ProCurve Manager Plus;
command line interface; Web browser;
configuration menu; out-of-band management
(serial RS-232C)
HP ProCurve Manager (included);
HP ProCurve Manager Plus;
command line interface; Web browser;
configuration menu; out-of-band management
(serial RS-232C)
Standards and protocols
RFC 783 TFTP; RFC 951 BootP; RFC 1542 BootP; RFC 854 Telnet; RFC 768 UDP; RFC 792 ICMP; RFC 793 TCP; RFC 826 ARP; RFC 2030 Simple Network Time Protocol;
IEEE 802.3x Flow Control; RFC 2236 IGMPv1/v2; IEEE 802.1D Spanning Tree; IEEE 802.1w Rapid Convergence Spanning Tree; IEEE 802.3ad Link Aggregation Control
Protocol; IEEE 802.3af PoE; Cisco Fast EtherChannel (FEC); SSHv1/v2 Secure Shell; Secure Sockets Layer (SSL); IEEE 802.1X Network Login; IEEE 802.1p Priority; IEEE
802.1Q GVRP; SNMPv1/v2c/v3; Cisco Discovery Protocol (CDP); HTML and telnet management; RFC 1493 Bridge MIB; RFC 1213 MIB II; RFC 2096 IP Forwarding Table
MIB; RFC 2737 Entity MIB; RFC 2863 Evolution of Interface; RFC 2665 Ethernet MIB; RFC 2819 Four groups of RMON: 1 (statistics), 2 (history), 3 (alarm), and 9 (events);
RFC 2021 RMON probe configuration (RMON v2); RFC 2668 802.3 MAU MIB; RFC 2613 SMON; RFC 2674 802.1p and IEEE 802.1Q Bridge MIB; RFC 2618 RADIUS
Client MIB; RADIUS Accounting MIB
Mounting
Immunity
EN
ESD
Radiated
EFT/Burst
Surge
Conducted
Power frequency magnetic field
Voltage dips and interruptions
Harmonics
Flicker
41
HP ProCurve Switch 2500 Series
HP ProCurve Switch 2524 (J4813A)
HP ProCurve Switch 2512 (J4812A)
The HP ProCurve Switch 2500 Series are low-cost, stackable, managed
24- and 12-port switches with 10/100 auto-sensing per port and 2
open transceiver slots for Gigabit or 100Base-FX. The HP ProCurve
Switches 2524 and 2512 offer HP Auto-MDIX on all 10/100 and
100/1000 ports and high-availability features. The HP ProCurve
Switches 2524 and 2512 are ideal for low-cost migration to 10/100
managed switching with uplinks.
Features and benefits
42
• 9.6 Gbps switch fabric integrated on-chip: highperformance switch design with a non-blocking
architecture
• RMON, XRMON, and SMON: provide advanced
monitoring and reporting capabilities for statistics,
history, alarms, and events
• HP Auto-MDIX: automatically adjusts for straight-through
or crossover cables on all 10/100 and 100/1000 ports
• Web interface: allows you to configure the switch from
any Web browser on the network
• Stacking capability: single IP address management
for a virtual stack of up to 16 switches, including the
2500 series, 2600 series, 2800 series, 4000m, 6108,
8000m, and 4100gl series
• 802.3ad Link Aggregation Control Protocol (LACP) and
HP trunking: support a single trunk with up to 4 links
(ports)
• VLAN support and tagging: support up to 30 portbased VLANs and dynamic configuration of 802.1Q
VLAN tagging, providing security between workgroups
HP ProCurve Switch 2500 Series
Features and benefits (continued)
• Group VLAN Registration Protocol (GVRP): allows
automatic learning and dynamic assignment
of VLANs
• Cisco Fast EtherChannel® (FEC): supports Cisco’s
proprietary FEC trunking protocol
• IP multicast (IGMPv3): prevents flooding of IP multicast
traffic
• Rapid Convergence Spanning Tree Protocol (802.1w):
increases network uptime through faster recovery from
failed links
• Port security: prevents unauthorized access using MAC
address lockdown
• 802.1X and RADIUS network login: control port-based
access for authentication and accountability
• Spanning Tree Protocol: provides redundant links while
preventing network loops
• Cisco Discovery Protocol (CDP): enables real-time
mapping of nodes to switch ports
• IEEE 802.1p prioritization: delivers data to devices
based on the priority and type of traffic
• Lifetime warranty: for as long as you own the product,
with next-business-day advance replacement (available
in most countries)
• TACACS+ : eases administration of switch management
security by using a password authentication server
Accessories
HP ProCurve Switch Gigabit Stacking Kit (J4116A) See page 63 for details.
HP ProCurve Gigabit-SX Transceiver (J4131B) See page 63 for details.
HP ProCurve Gigabit-LX Transceiver (J4132A) See page 63 for details.
HP ProCurve 100/1000-T Transceiver (J4834A) See page 64 for details.
HP ProCurve 100-FX SC Transceiver (J4853A) See page 64 for details.
Services
• 3-year, 4-hour onsite, 13 x 5 coverage, 13 x 5 phone
support, for hardware (H5484A/E)
• Installation with minimum configuration, system-based
pricing (U4826A/E)
• 3-year, 4-hour onsite, 24 x 7 coverage, 24 x 7 phone
support, for hardware (U6300A/E)
• Installation with HP-provided configuration, system-based
pricing (U4830A/E)
• 3-year, 4-hour onsite, 24 x 7 coverage for hardware,
24 x 7 software phone support (U6299A/E)
For details about services and response times in your
area, please contact your local HP sales office.
43
HP ProCurve Switch 2500 Series
Specifications
HP ProCurve Switch 2524 (J4813A)
HP ProCurve Switch 2512 (J4812A)
24 RJ-45 10/100 ports (IEEE 802.3 Type 10Base-T,
IEEE 802.3u Type 100Base-TX)
2 open transceiver slots
1 RS-232C DB-9 console port
12 RJ-45 10/100 ports (IEEE 802.3 Type 10Base-T,
IEEE 802.3u Type 100Base-TX)
2 open transceiver slots
1 RS-232C DB-9 console port
Weight (fully loaded)
17.4 x 8 x 1.8 in. (44.2 x 20.32 x 4.57 cm)
(1U height)
6 lb. (2.7 kg)
17.4 x 8 x 1.8 in. (44.2 x 20.32 x 4.57 cm)
(1U height)
6 lb. (2.7 kg)
Memory and processor
Module
Packet buffer size
RAM/ROM capacity
Flash capacity
ARM7TDMI @ 62.5 MHz
6 MB
26 MB
2 MB
ARM7TDMI @ 62.5 MHz
6 MB
26 MB
2 MB
Mounting
Mounts in a standard 19 in. rack (hardware included)
Mounts in a standard 19 in. rack (hardware included)
Performance
Latency
Throughput
Switch fabric
Address table size
<10 µs (LIFO)
6.6 mpps (64-byte packets)
9.6 Gbps
4,096 entries
<10 µs (LIFO)
4.8 mpps (64-byte packets)
9.6 Gbps
4,096 entries
Environment
Operating temperature
Operating relative humidity
Non-operating/storage temperature
Non-operating/storage relative humidity
Shock and vibration
32°F to 131°F (0°C to 55°C)
15% to 95% @ 104°F (40°C), non-condensing
–40°F to 158°F (–40°C to 70°C)
90% @ 149°F (65°C), non-condensing
HP759, HP760 (similar to EN 60068, IEC 68)
32°F to 131°F (0°C to 55°C)
15% to 95% @ 104°F (40°C), non-condensing
–40°F to 158°F (–40°C to 70°C)
15% to 95% @ 149°F (65°C), non-condensing
HP759, HP760 (similar to EN 60068, IEC 68)
Electrical characteristics
Maximum BTUs
Voltage
Current
Power
Frequency
123 BTU/hr
100–127 VAC/200–240 VAC
2.4A/1.2A
36W
50/60 Hz
123 BTU/hr
100–127 VAC/200–240 VAC
2.4A/1.2A
36W
50/60 Hz
Safety
cUL (CSA 950); EN 60950/IEC 950;
NOM-019-SCFI-1994; UL 1950 3rd edition
cUL (CSA 950); EN 60950/IEC 950;
NOM-019-SCFI-1994; UL 1950 3rd edition
Emissions
FCC Class A; EN 55022/CISPR 22 Class A;
VCCI Class A
FCC Class A; EN 55022/CISPR 22 Class A;
VCCI Class A
EN 50082-1
IEC/EN 61000-4-2, 4 kV CD, 8 kV AD
IEC/EN 61000-4-3, 3V/m
IEC/EN 61000-4-4; 1.0 kV (power line),
0.5 kV (signal line)
EN 50082-1
IEC/EN 61000-4-2, 4 kV CD, 8 kV AD
IEC/EN 61000-4-3, 3V/m
IEC/EN 61000-4-4; 1.0 kV (power line),
0.5 kV (signal line)
Management
HP ProCurve Manager (included);
HP ProCurve Manager Plus;
command line interface; Web browser;
configuration menu; out-of-band management
(serial RS-232C)
HP ProCurve Manager (included);
HP ProCurve Manager Plus;
command line interface; Web browser;
configuration menu; out-of-band management
(serial RS-232C)
Standards and protocols
IEEE 802.3x Flow Control; RFC 3376 IGMP v1/v2/v3; IEEE 802.1D Spanning Tree; IEEE 802.3ad Link Aggregation Control Protocol; Cisco Fast EtherChannel® (FEC); RFC 1492
TACACS+; IEEE 802.1X Network Login; IEEE 802.1p Priority; IEEE 802.1Q VLANs; IEEE 802.1Q GVRP; SNMPv1/v2c; Cisco Discovery Protocol (CDP); RFC 1493 Bridge MIB;
RFC 2819 Four groups of RMON: 1 (statistics), 2 (history), 3 (alarm), and 9 (events); Extended RMON; RFC 2613 SMON; RFC 2674 802.1p and IEEE 802.1Q Bridge MIB,
RFC 3164 (Syslog)
Ports
Physical characteristics
Dimensions
Immunity
Generic
ESD
Radiated
EFT/Burst
44
HP ProCurve Switch 4000m
and Switch 8000m
HP ProCurve Switch 4000m (J4121A)
HP ProCurve Switch 8000m (J4110A)
The HP ProCurve Switch 4000m and 8000m are managed modular
10/100/100 desktop switches that provide scalable, expandable,
low-cost migration to 10/100 switching for the desktop with
Gigabit uplinks. The 4000m and 8000m are a simple way to build
high-availability networks. The 4000m includes 40 auto-sensing
10/100 ports and 5 open module slots. The 8000m provides
10 open module slots.
Features and benefits
• Stacking capability: single IP address management
for a virtual stack of up to 16 switches, including the
2500 series, 2600 series, 2800 series, 4000m, 6108,
8000m, and 4100gl series
• RMON and XRMON: provide advanced monitoring
and reporting capabilities for statistics, history, alarms,
and events
• VLAN support and tagging: support up to 30 portbased VLANs and dynamic configuration of 802.1Q
VLAN tagging, providing security between workgroups
• Class of Service (CoS) tagging: sets 802.1p priority field
using policy-based management
• IP multicast (IGMP): prevents flooding of IP multicast
traffic
• Port monitoring: allows you to monitor traffic using a
switched port so you can view several ports at one time
with a network analyzer
• Port security: prevents unauthorized access using MAC
address lockdown
• Web interface: allows you to configure the switch from
any Web browser on the network
• HP switch meshing: dynamically load-balances across
multiple active redundant links to increase available
aggregate bandwidth
• Protocol filtering: provides traffic control
45
HP ProCurve Switch 4000m and Switch 8000m
Features and benefits (continued)
• Hot-swappable modules: permit modules and miniGBICs to be added or swapped without interrupting
the network
• Automatic broadcast control (ABC): minimizes IP and
IPX broadcast traffic throughout the network
• Optional redundant power supply: provides
uninterrupted power
• TACACS+ : eases switch management security
administration by using a password authentication
server
• Spanning Tree Protocol: provides redundant links while
preventing network loops
• Cisco Discovery Protocol (CDP): enables real-time
mapping of nodes to switch ports
• 802.3ad Link Aggregation Control Protocol (LACP) and
HP trunking: support up to 10 trunks, each with up to
4 links (ports) per trunk; trunking across modules is
supported
• Lifetime warranty: for as long as you own the product,
with next-business-day advance replacement (available
in most countries)
• Cisco Fast EtherChannel® (FEC): supports Cisco’s
proprietary FEC trunking protocol
Services
46
• 3-year, 4-hour onsite, 13 x 5 coverage, 13 x 5 phone
support, for hardware (H5481A/E)
• Installation with minimum configuration, system-based
pricing (U4827A/E)
• 3-year, 4-hour onsite, 24 x 7 coverage, 24 x 7 phone
support, for hardware (U6303A/E)
• Installation with HP-provided configuration, system-based
pricing (U4831A/E)
• 3-year, 4-hour onsite, 24 x 7 coverage for hardware,
24 x 7 software phone support (U6302A/E)
For details about services and response times in your
area, please contact your local HP sales office.
HP ProCurve Switch 4000m and Switch 8000m
Specifications
HP ProCurve Switch 4000m (J4121A)
HP ProCurve Switch 8000m (J4110A)
40 RJ-45 10/100 ports (IEEE 802.3 Type 10Base-T,
IEEE 802.3u Type 100Base-TX)
5 open module slots
1 RS-232C DB-9 console port
10 open module slots
1 RS-232C DB-9 console port
17.4 x 13.2 x 7 in. (44.2 x 33.53 x 17.78 cm)
(4U height)
22.9 lb. (10.31 kg)
17.4 x 13.2 x 7 in. (44.2 x 33.53 x 17.78 cm)
(4U height)
20.7 lb. (9.32 kg)
Fabric
RAM/ROM capacity
Flash capacity
512 KB per port (10/100 ports);
4 MB per port (Gigabit ports)
Intel® i960JD @ 66 MHz
16 MB
2 MB
512 KB per port (10/100 ports);
4 MB per port (Gigabit ports)
Intel® i960JD @ 66 MHzz
16 MB
2 MB
Mounting
Mounts in a standard 19 in. rack (hardware included)
Mounts in a standard 19 in. rack (hardware included)
Performance
Latency
Throughput
Switch fabric
Address table size
<10 µs (LIFO)
4.67 mpps
3.8 Gbps
10,000 entries
<10 µs (LIFO)
4.67 mpps
3.8 Gbps
10,000 entries
Environment
Operating temperature
Operating relative humidity
Non-operating/storage temperature
Non-operating/storage relative humidity
Shock and vibration
32°F to 131°F (0°C to 55°C)
15% to 95% @ 104°F (40°C), non-condensing
–40°F to 158°F (–40°C to 70°C)
15% to 90% @ 149°F (65°C), non-condensing
EN 60068 (IEC 68)
32°F to 131°F (0°C to 55°C)
15% to 95% @ 104°F (40°C), non-condensing
–40°F to 158°F (–40°C to 70°C)
15% to 90% @ 149°F (65°C), non-condensing
EN 60068 (IEC 68)
Electrical characteristics
Maximum BTUs
Voltage
Current
Power
Frequency
535 BTU/hr
100–127 VAC/200–240 VAC
2.0A/1.0A
157W
50/60 Hz
535 BTU/hr
100–127 VAC/200–240 VAC
2.0A/1.0A
157W
50/60 Hz
Safety
cUL (CSA 950); EN 60950/IEC 950;
NOM-019-SCFI-1994; UL 1950 3rd edition
cUL (CSA 950); EN 60950/IEC 950;
NOM-019-SCFI-1994; UL 1950 3rd edition
Emissions
FCC Class A; EN 55022/CISPR 22 Class A;
VCCI Class A
FCC Class A; EN 55022/CISPR 22 Class A;
VCCI Class A
EN 50082-1
IEC 801-2; 4 kV CD, 8 kV AD
IEC 801-3; 3V/m
IEC 801-4; 1.0 kV (power line),
0.5 kV (signal line)
EN 50082-1
IEC 801-2; 4 kV CD, 8 kV AD
IEC 801-3; 3V/m
IEC 801-4; 1.0 kV (power line),
0.5 kV (signal line)
Management
HP ProCurve Manager (included);
HP ProCurve Manager Plus;
command line interface; Web browser;
configuration menu; out-of-band management
(serial RS-232C)
HP ProCurve Manager (included);
HP ProCurve Manager Plus;
command line interface; Web browser;
configuration menu; out-of-band management
(serial RS-232C)
Standards and protocols
IEEE 802.3x Flow Control
IEEE 802.1D Spanning Tree
IEEE 802.1p Priority
IEEE 802.1Q VLANs
SNMPv1/v2c
RFC 1493 Bridge MIB
RFC 2819 RMON groups: 1 (statistics),
2 (history), 3 (alarm), and 9 (events)
Extended RMON
IEEE 802.3x Flow Control
IEEE 802.1D Spanning Tree
IEEE 802.1p Priority
IEEE 802.1Q VLANs
SNMPv1/v2c
RFC 1493 Bridge MIB
RFC 2819 RMON groups: 1 (statistics),
2 (history), 3 (alarm), and 9 (events)
Extended RMON
Ports
Physical characteristics
Dimensions
Weight (fully loaded)
Memory and processor
Packet buffer size:
Immunity
Generic
ESD
Radiated
EFT/Burst
47
HP ProCurve Switch 8000m and 4000m Modules
HP ProCurve Switch 10/100Base-T Module (J4111A)
with 8 auto-sensing 10/100 ports
Cabling
Type:
• 10Base-T: Category 3 (or better), 100Ω differential
unshielded twisted pair (UTP) or shielded twisted
pair (STP), complying with IEEE 802.3 Type
10Base-T specifications
• 100Base-TX: Category 5 (or better), 100Ω
differential unshielded twisted pair (UTP) or shielded
twisted pair (STP), complying with IEEE 802.3u
100Base-TX
Maximum distance: 100m
Ports
8 auto-sensing 10/100 ports (IEEE 802.3 Type
10Base-T; 802.3u Type 100Base-TX)
Connector: RJ-45
HP Auto-MDIX: no (ports are MDI-X)
Duplex: half or full
Physical characteristics
Dimensions: 7.1 x 6.5 x 1.4 in.
(18.03 x 16.51 x 3.56 cm)
Weight: 0.56 lb. (0.25 kg)
HP ProCurve Switch 100Base-FX Module (J4112A)
Ports
4 100Base-FX ports (IEEE 802.3u Type 100Base-FX)
Connector: SC
Duplex: full
with 4 100Base-FX ports
Physical characteristics
Dimensions: 7.1 x 6.5 x 1.4 in.
(18.03 x 16.51 x 3.56 cm)
An HP ProCurve 4000m/8000m redundant power
supply (J4119A) is required if more than 5
HP ProCurve switch 100Base-FX modules (J4112A)
are installed.
Weight: 0.56 lb. (0.25 kg)
HP ProCurve Switch Gigabit-SX Module (J4113A)
with one 1000Base-SX port
HP ProCurve Switch Gigabit-LX Module (J4114A)
with one 1000Base-LX port
48
Ports
One 1000Base-SX port (IEEE 802.3z Type 1000Base-SX)
Connector: SC
Duplex: full
Physical characteristics
Dimensions: 7.1 x 6.5 x 1.4 in.
(18.03 x 16.51 x 3.56 cm)
Weight: 0.56 lb. (0.25 kg)
Ports
One 1000Base-LX port (IEEE 802.3z Type 1000Base-LX)
Connector: SC
Duplex: full
Physical characteristics
Dimensions: 7.1 x 6.5 x 1.4 in.
(18.03 x 16.51 x 3.56 cm)
Weight: 0.56 lb. (0.25 kg)
Cabling
Type: 62.5/125 µm or 50/125 µm (core/cladding)
diameter, graded-index, multimode fiber-optic,
complying with ITU-T G.651 and ISO/IEC 793-2
Type A1b or A1a, respectively
Maximum distance: 2 km (full-duplex) or 412m
(half-duplex)
Cabling
Type: 62.5/125 µm or 50/125 µm (core/cladding)
diameter, graded-index, low metal content,
multimode fiber-optic, complying with ITU-T G.651
and ISO/IEC 793-2 Type A1b or A1a, respectively
Maximum distance:
• 220m (62.5 µm core diameter, 160 MHz x km
bandwidth)
• 275m (62.5 µm core diameter, 200 MHz x km
bandwidth)
• 500m (50 µm core diameter, 400 MHz x km
bandwidth)
• 550m (50 µm core diameter, 500 MHz x km
bandwidth)
Cabling
Type: either single mode or multimode
• 9/125 µm (core/cladding) diameter, 1310 nm,
low metal content, single mode fiber-optic, complying
with ITU-T G.652 and ISO/IEC 793-2 Type B1
• 62.5/125 µm or 50/125 µm (core/cladding)
diameter, graded-index, low metal content,
multimode fiber-optic, complying with ITU-T G.651
and ISO/IEC 793-2 Type A1b or A1a, respectively
(a mode conditioning patch cord may be needed in
some multimode fiber installations)
Maximum distance: 10 km (single mode) or 550m
(multimode)
Services for accessories are covered under the product in which they are installed.
HP ProCurve Switch 8000m and 4000m Modules
HP ProCurve Switch 100/1000Base-T Module (J4115B)
with 1 auto-sensing 100/1000 port
Ports
1 auto-sensing 100/1000 port (IEEE 802.3u Type
100Base-TX; 802.3ab Type 1000Base-T)
Connector: RJ-45
HP Auto-MDIX: yes
Duplex:
• 100Base-TX: half or full
• 1000Base-T: full
Physical characteristics
Dimensions: 7.1 x 6.5 x 1.4 in.
(18.03 x 16.51 x 3.56 cm)
Weight: 0.56 lb. (0.25 kg)
HP ProCurve Switch 10Base-FL Module (J4118A)
with 4 10Base-FL ports
HP ProCurve 4000m/8000m Redundant Power Supply
(J4119A)
not pictured
Ports
4 10Base-FL ports (IEEE 802.3j Type 10Base-FL)
Connector: ST
Duplex: half or full
Physical characteristics
Dimensions: 7.1 x 6.5 x 1.4 in.
(18.03 x 16.51 x 3.56 cm)
Weight: 0.56 lb. (0.25 kg)
Only used with:
• HP ProCurve Switch 8000m (J4110A)
• HP ProCurve Switch 4000m (J4121A)
Physical characteristics
Dimensions: 8.1 x 5.5 x 6.6 in.
(20.57 x 13.97 x 16.76 cm)
Weight: 3.31 lb. (1.49 kg)
Services for accessories are covered under the product in which they are installed.
Cabling
Type:
• 100Base-TX: Category 5 (or better), 100Ω differential
unshielded twisted pair (UTP) or shielded twisted
pair (STP), complying with IEEE 802.3u 100Base-TX
• 1000Base-T: Category 5 (5E or better recommended),
100Ω differential 4-pair unshielded twisted pair
(UTP) or shielded twisted pair (STP) balanced,
complying with IEEE 802.3ab 1000Base-T
Maximum distance: 100m
Cabling
Type: 62.5/125 µm or 50/125 µm (core/cladding)
diameter, graded-index, multimode fiber-optic,
complying with ITU-T G.651 and ISO/IEC 793-2
Type A1b or A1a, respectively
Maximum distance: 1 km
Electrical characteristics
• Voltage: 100–127 VAC/200–240 VAC
• Current: 2.0A/1.0A
• Frequency: 50/60 Hz
For additional RPS specification information, see the
data sheet for the product in which the RPS is being
installed.
49
HP ProCurve Switch 2700 Series
HP ProCurve Switch 2724 (J4897A)
HP ProCurve Switch 2708 (J4898A)
The HP ProCurve Switch 2700 Series are low-cost, unmanaged
24- and 8-port switches with 10/100/1000 auto-sensing per
port. The HP ProCurve Switch 2724 and Switch 2708 offer
HP Auto-MDIX on all 10/100/1000 ports and are ideal for
building networks with connectivity for any combination of
10 Mbit, 100 Mbit, and 1000 Mbit devices.
50
HP ProCurve Switch 2700 Series
Features and benefits
• Performance: maximized throughput for all PCs
and servers
• HP Auto-MDIX: automatically adjusts for straight-through
or crossover cables on all 10/100/1000 ports
• 10/100/1000 auto-sensing per port: automatically
detects and sets the speed for any 10Base-T,
100Base-TX, or 1000Base-T device
• Flow control: ensures reliable communication during
full-duplex operation
• Comprehensive LED display with per-port indicators:
provides an at-a-glance view of status, activity, speed,
and full-duplex operation
• Half/Full duplex auto-negotiating capability on every
port: doubles the throughput of every port
• Lifetime warranty: for as long as you own the product,
with next-business-day advance replacement (available
in most countries)
• Unmanaged: provides plug-and-play simplicity
Services
HP ProCurve Switch 2724:
• 3-year, 4-hour onsite, 13 x 5 coverage, 13 x 5 phone
support, for hardware (H5481A/E)
HP ProCurve Switch 2708:
• 3-year, 4-hour onsite, 13 x 5 coverage, 13 x 5 phone
support, for hardware (H5484A/E)
• 3-year, 4-hour onsite, 24 x 7 coverage, 24 x 7 phone
support, for hardware (U6303A/E)
• 3-year, 4-hour onsite, 24 x 7 coverage, 24 x 7 phone
support, for hardware (U6300A/E)
• 3-year, 4-hour onsite, 24 x 7 coverage for hardware,
24 x 7 software phone support (U6302A/E)
• 3-year, 4-hour onsite, 24 x 7 coverage for hardware,
24 x 7 software phone support (U6299A/E)
• Installation with minimum configuration, system-based
pricing (U4826A/E)
• Installation with minimum configuration, system-based
pricing (U4826A/E)
• Installation with HP-provided configuration, system-based
pricing (U4830A/E)
• Installation with HP-provided configuration, system-based
pricing (U4830A/E)
For details about services and response times in your
area, please contact your local HP sales office.
51
HP ProCurve Switch 2700 Series
Specifications
HP ProCurve Switch 2724 (J4897A)
HP ProCurve Switch 2708 (J4898A)
24 RJ-45 10/100/1000 ports (IEEE 802.3
Type 10Base-T, IEEE 802.3u Type 100Base-T,
IEEE 802.3ab 1000Base-T Gigabit Ethernet)
8 RJ-45 10/100/1000 ports (IEEE 802.3
Type 10Base-T, IEEE 802.3u Type 100Base-T,
IEEE 802.3ab 1000Base-T Gigabit Ethernet)
Weight (fully loaded)
17.4 x 9.3 x 1.7 in. (44.2 x 23.62 x 4.32 cm)
(1U height)
7.6 lb. (3.42 kg)
17.4 x 9.3 x 1.7 in. (44.2 x 23.62 x 4.32 cm)
(1U height)
6.8 lb. (3.06 kg)
Mounting
Mounts in a standard 19 in. rack (hardware included)
Mounts in a standard 19 in. rack (hardware included)
Performance
Latency
Throughput
Switching capacity
Address table size
<12 µs (LIFO)
35.7 mpps
48 Gbps
32,000 entries
<2.5 µs (LIFO)
11.9 mpps
16 Gbps
8,000 entries
Environment
Operating temperature
Operating relative humidity
Non-operating/storage temperature
Non-operating/storage relative humidity
Shock and vibration
32°F to 131°F (0°C to 55°C)
15% to 95% @ 104°F (40°C), non-condensing
–40°F to 158°F (–40°C to 70°C)
15% to 90% @ 149°F (65°C), non-condensing
HP759, HP760 (similar to IEC 68)
32°F to 131°F (0°C to 55°C)
15% to 95% @ 104°F (40°C), non-condensing
–40°F to 158°F (–40°C to 70°C)
15% to 90% @ 149°F (65°C), non-condensing
HP759, HP760 (similar to IEC 68)
Electrical characteristics
Maximum BTUs
Voltage
Current
Power
Frequency
341 BTU/hr
100–127 VAC/200–240 VAC
1.5A
100W
50/60 Hz
341 BTU/hr
100–127 VAC/200–240 VAC
1.5A
100W
50/60 Hz
Safety
cUL (CSA 950); EN 60950/IEC 950;
NOM-019-SCFI-1994; UL 1950 3rd edition
cUL (CSA 950); EN 60950/IEC 950;
NOM-019-SCFI-1994; UL 1950 3rd edition
Emissions
FCC Class A; EN 55022/CISPR 22 Class A;
VCCI Class A
FCC Class A; EN 55022/CISPR 22 Class A;
VCCI Class A
EN 50082-1
IEC/EN 61000-4-2; 4 kV CD, 8 kV AD
IEC/EN 61000-4-3; 3V/m
IEC/EN 61000-4-4; 1.0 kV (power line),
0.5 kV (signal line)
EN 50082-1
IEC/EN 61000-4-2; 4 kV CD, 8 kV AD
IEC/EN 61000-4-3; 3V/m
IEC/EN 61000-4-4; 1.0 kV (power line),
0.5 kV (signal line)
Ports
Physical characteristics
Dimensions
Immunity
Generic
ESD
Radiated
EFT/Burst
Standards and protocols
52
IEEE 802.3x Flow Control
HP ProCurve Switch 2300 Series
HP ProCurve Switch 2324 (J4818A)
HP ProCurve Switch 2312 (J4817A)
The HP ProCurve Switch 2300 Series are low-cost, unmanaged
24- and 12-port switches with 10/100 auto-sensing per port
and 2 open transceiver slots for Gigabit or 100Base-FX
uplinks. The HP ProCurve Switch 2324 and Switch 2312 offer
HP Auto-MDIX on all 10/100 and 100/1000 uplink ports.
53
HP ProCurve Switch 2300 Series
Features and benefits
• 9.6 Gbps switch fabric integrated on-chip: highperformance switch design with a non-blocking
architecture
• HP Auto-MDIX: automatically adjusts for straight-through
or crossover cables on all 10/100 and 100/1000 ports
• Media-flexible uplink ports: provide Gigabit or
100Base-FX ports for uplinks or server connections
• 10/100 auto-sensing per port: automatically detects
and sets the speed for any 10Base-T or 100Base-TX
device
• Unmanaged: provides plug-&-play simplicity
• Comprehensive LED display with per-port indicators:
provides an at-a-glance view of status, activity, speed,
and full-duplex operation
• Half/Full duplex auto-negotiating capability on every
port: double the throughput of every port
• Lifetime warranty: for as long as you own the product,
with next-business-day advance replacement (available
in most countries)
• Flow control: ensures reliable communication during
full-duplex operation
Accessories
HP ProCurve Switch Gigabit Stacking Kit (J4116A) See page 63 for details.
HP ProCurve Gigabit-SX Transceiver (J4131B) See page 63 for details.
HP ProCurve Gigabit-LX Transceiver (J4132A) See page 63 for details.
HP ProCurve 100/1000-T Transceiver (J4834A) See page 64 for details.
HP ProCurve 100-FX SC Transceiver (J4853A) See page 64 for details.
Services
54
• 3-year, 4-hour onsite, 13 x 5 coverage, 13 x 5 phone
support, for hardware (H5484A/E)
• Installation with minimum configuration, system-based
pricing (U4826A/E)
• 3-year, 4-hour onsite, 24 x 7 coverage, 24 x 7 phone
support, for hardware (U6300A/E)
• Installation with HP-provided configuration, system-based
pricing (U4830A/E)
• 3-year, 4-hour onsite, 24 x 7 coverage for hardware,
24 x 7 software phone support (U6299A/E)
For details about services and response times in your
area, please contact your local HP sales office.
HP ProCurve Switch 2300 Series
Specifications
HP ProCurve Switch 2324 (J4818A)
HP ProCurve Switch 2312 (J4817A)
24 RJ-45 10/100 ports (IEEE 802.3
Type 10Base-T, IEEE 802.3u Type 100Base-TX)
2 open transceiver slots
1 RS-232C DB-9 console port
12 RJ-45 10/100 ports (IEEE 802.3
Type 10Base-T, IEEE 802.3u Type 100Base-TX)
2 open transceiver slots
1 RS-232C DB-9 console port
Weight (fully loaded)
17.4 x 8 x 1.75 in. (44.2 x 20.32 x 4.45 cm)
(1U height)
6 lb. (2.7 kg)
17.4 x 8 x 1.75 in. (44.2 x 20.32 x 4.45 cm)
(1U height)
6 lb. (2.7 kg)
Memory and Processor
Module
Packet buffer size
RAM/ROM capacity
Flash capacity
ARM7TDMI @ 62.5 MHz
6 MB
26 MB
2 MB
ARM7TDMI @ 62.5 MHz
6 MB
26 MB
2 MB
Mounting
Mounts in a standard 19 in. rack (hardware included)
Mounts in a standard 19 in. rack (hardware included)
Performance
Latency
Throughput
Switching capacity
Address table size
<10 µs (LIFO)
6.6 mpps
9.6 Gbps
4,096 entries
<10 µs (LIFO)
4.8 mpps
9.6 Gbps
4,096 entries
Environment
Operating temperature
Operating relative humidity
Non-operating/storage temperature
Non-operating/storage relative humidity
Shock and vibration
32°F to 131°F (0°C to 55°C)
15% to 95% @ 104°F (40°C), non-condensing
–40°F to 158°F (–40°C to 70°C)
15% to 90% @ 149°F (65°C), non-condensing
HP759, HP760 (similar to EN 60068, IEC 68)
32°F to 131°F (0°C to 55°C)
15% to 95% @ 104°F (40°C), non-condensing
–40°F to 158°F (–40°C to 70°C)
15% to 90% @ 149°F (65°C), non-condensing
HP759, HP760 (similar to EN 60068, IEC 68)
Electrical characteristics
Maximum BTUs
Voltage
Current
Power
Frequency
123 BTU/hr
100–127 VAC/200–240 VAC
2.4A/1.2A
36W
50/60 Hz
123 BTU/hr
100–127 VAC/200–240 VAC
2.4A/1.2A
36W
50/60 Hz
Safety
cUL (CSA 950); EN 60950/IEC 950;
NOM-019-SCFI-1994; UL 1950 3rd edition
cUL (CSA 950); EN 60950/IEC 950;
NOM-019-SCFI-1994; UL 1950 3rd edition
Emissions
FCC Class A; EN 55022/CISPR 22 Class A;
VCCI Class A
FCC Class A; EN 55022/CISPR 22 Class A;
VCCI Class A
EN 50082-1
IEC/EN 61000-4-2; 4 kV CD, 8 kV AD
IEC/EN 61000-4-3; 3V/m
IEC/EN 61000-4-4; 1.0 kV (power line),
0.5 kV (signal line)
EN 50082-1
IEC/EN 61000-4-2; 4 kV CD, 8 kV AD
IEC/EN 61000-4-3; 3V/m
IEC/EN 61000-4-4; 1.0 kV (power line),
0.5 kV (signal line)
IEEE 802.3x Flow Control
IEEE 802.3x Flow Control
Ports
Physical characteristics
Dimensions
Immunity
Generic
ESD
Radiated
EFT/Burst
Standards and protocols
55
HP ProCurve Switch 2124
HP ProCurve Switch 2124 (J4868A)
The HP ProCurve Switch 2124 is a low-cost, unmanaged
24-port switch with 10/100 auto-sensing per port and
1 open transceiver slot for a 100Base-FX uplink. The
HP ProCurve Switch 2124 offers HP Auto-MDIX on all
10/100 ports.
56
HP ProCurve Switch 2124
Features and benefits
• 24 auto-sensing 10/100 ports: high-performance
switching
• 1U form factor: the industry’s most frequently requested
size
• Full scalability: optional 100Base-FX fiber-optic (full
duplex bandwidth) transceiver enables low-cost uplink
connectivity into a wiring closet up to 2 km away
• HP Auto-MDIX: automatically adjusts for straight-through
or crossover cables on all 10/100 ports
• Unmanaged: provides plug-and-play simplicity
• Use on desktop or rackmounted: quiet operation
enables flexible use
• Low-cost/high-performance: combines affordability,
scalability, and ease-of-use
• Lifetime warranty: for as long as you own the product,
with next-business-day advance replacement (available
in most countries)
Accessories
HP ProCurve 100-FX SC Transceiver (J4853A) See page 64 for details.
Services
• 3-year, 4-hour onsite, 13 x 5 coverage, 13 x 5 phone
support, for hardware (H5484A/E)
• Installation with minimum configuration, system-based
pricing (U4826A/E)
• 3-year, 4-hour onsite, 24 x 7 coverage, 24 x 7 phone
support, for hardware (U6300A/E)
• Installation with HP-provided configuration, system-based
pricing (U4830A/E)
• 3-year, 4-hour onsite, 24 x 7 coverage for hardware,
24 x 7 software phone support (U6299A/E)
For details about services and response times in your
area, please contact your local HP sales office.
57
HP ProCurve Switch 2124
Specifications
Ports
24 RJ-45 10/100 ports (IEEE 802.3
Type 10Base-T; 802.3u Type
100Base-TX)
1 open transceiver slot for optional
100Base-FX transceiver uplink
Physical characteristics
Dimensions: 17.4 x 8.0 x 1.8 in.
(44.2 x 20.3 x 4.4 cm)
Weight: 8.25 lb. (3.75 kg)
Memory
Packet buffer size: 768 KB
Mounting
Mounts in a standard 19 in. rack
(hardware included)
58
Performance
Latency: <8.5 µs (LIFO)
Switch fabric speed: 2.6 Gbps
Address table size: 4,096 entries
Environment
Operating
– Temperature: 32°F to 131°F
(0°C to 55°C)
– Relative humidity: 15% to 95% @
104°F (40°C), non-condensing
Non-operating/Storage
– Temperature: –40°F to 158°F
(–40°C to 70°C)
– Relative humidity: 90% @ 149°F
(65°C), non-condensing
Shock and vibration: HP759,
HP760 (similar to EN 60068
IEC 68)
Acoustic: ISO 7779, DIN
EN 27779 compliant (4.2 Bels)
Electrical characteristics
Maximum BTUs: 341 BTU/hr
Voltage: 100–240 VAC
Current: 1.0A
Power: 100W
Frequency: 50/60 Hz
Safety
EN 60950/IEC 950
UL 1950 3rd edition
cUL (CSA 950)
NOM-019-SCFI-1994
Emissions
FCC Class A
EN 55022/CISPR 22 Class A
VCCI Class A
Immunity
Generic: EN 50082-1
EN 55024/CISPR 24
ESD: IEC/EN 61000-4-2; 4 kV CD,
8 kV AD
Radiated: IEC/EN 61000-4-3;
3V/m
EFT/Burst: IEC/EN 61000-4-4;
1.0 kV (power line),
0.5 kV (signal line)
Surge: IEC 61000-4-5;
1 kV/2 kV AC
Conducted: IEC 61000-4-6; 3V
Power frequency magnetic field:
IEC 61000-4-8; 1A/m, 50 or
60 Hz
Voltage dips or interruptions: IEC
61000-4-11, >95% reduction,
0.5 period; 30% reduction,
25 periods
Harmonics: EN 61000-3-2/
IEC 61000-3-2
Flicker: EN 61000-3-3/
IEC 61000-3-3
Standards and protocols
IEEE 802.3x Flow Control
HP ProCurve Switch 408
HP ProCurve Switch 408 (J4097B)
The HP ProCurve Switch 408 is a compact, unmanaged 8-port
10/100 switch offers half/full duplex 10/100 auto-sensing on
every port and HP Auto-MDIX on all ports for easy expansion.
Ideal for building small networks or connecting peripherals
with any combination of 10 Mbit and 100 Mbit devices.
59
HP ProCurve Switch 408
Features and benefits
• Auto-sensing: 10/100 auto-sensing per port
automatically detects and sets the speed for any
10Base-T or 100Base-TX device
• Switch design: delivers dedicated bandwidth to each
device and uses segmentation to improve network
utilization
• HP Auto-MDIX: automatically adjusts for straight-through
or crossover cables on all 10/100 ports
• Auto-negotiation: half/full duplex auto-negotiation on
every port automatically doubles the throughput to each
device, up to 200 Mbps
• Flow control: ensures reliable communications during
full-duplex operation
• Unmanaged: provides plug-and-play simplicity
• LED display: comprehensive LED display with per-port
indicators allows you to monitor status and activity of
every port at a glance
• Automatic polarity correction: helps find and fix
common cabling problems
Accessories
Mounting Kit (5183-7210)
60
• Compact: small footprint allows multiple mounting
configurations on a flat surface, side-by-side, or in a
standard rack
• Lifetime warranty: for as long as you own the product,
with next-business-day advance replacement (available
in most countries)
HP ProCurve Switch 408
Services
• 3-year, 4-hour onsite, 13 x 5 coverage, 13 x 5 phone
support, for hardware (H5484A/E)
• Installation with minimum configuration, system-based
pricing (U4826A/E)
• 3-year, 4-hour onsite, 24 x 7 coverage, 24 x 7 phone
support, for hardware (U6300A/E)
• Installation with HP-provided configuration, system-based
pricing (U4830A/E)
• 3-year, 4-hour onsite, 24 x 7 coverage for hardware,
24 x 7 software phone support (U6299A/E)
For details about services and response times in your
area, please contact your local HP sales office.
Specifications
Ports
8 RJ-45 10/100 ports (IEEE
802.3 Type 10Base-TX;
802.3u Type 100Base-TX)
All ports HP Auto-MDIX
Physical characteristics
Dimensions: 7.8 x 4.8 x 1.6 in.
(19.9 x 12.1 x 4.0 cm)
Weight: 1.5 lb. (0.7 kg)
Mounting
Mounts in a standard 19 in. rack
with optional four-way
mounting kit
Memory
Packet buffer size: 64 KB per port
RAM/ROM capacity: 512 KB
Performance
Address table size: 1,000
Environment
Operating
– Temperature: 32°F to 131°F
(0°C to 55°C)
– Relative humidity: 15 to 95% @
104°F (40°C), non-condensing
Non-operating/Storage
– Temperature: –40°F to 158°F
(–40°C to 70°C)
– Relative humidity: 90% @ 149°F
(65°C), non-condensing
Shock and vibration: EN 60068
(IEC 68)
Electrical characteristics
Maximum BTUs: 52 BTU/hr
Voltage: 110–127 VAC/
200–240 VAC
Current: 0.4A max/0.2A max
Power: 15W (external power
supply)
Frequency: 50/60 Hz
Safety (complies with)
EN 60950/IEC 950
UL 1950
CSA 950
NOM-019-SCFI-1994
Emissions
FCC Class A
EN 55022:1998/CISPR 22:1997
Class A
VCCI Class A
Immunity
Generic: EN 55022:1998/
CISPR 22:1997
ESD: IEC 61000-4-3:1995;
4 kV CD, 8 kV AD
Radiated: IEC 61000-4-3:1995;
3V/m
EFT/Burst: IEC 61000-4-4:1995;
1.0 kV (power line),
0.5 kV (signal line)
Surge: IEC 61000-4-5:1995;
1 kV/2 kV AC
Conducted: IEC 61000-4-6:1996;
3V
Magnetic field: IEC 61000-4-8:1993;
1A/m, 50 or 60 Hz
Voltage: IEC 61000-4-11:1994;
>95% reduction, 0.5 period;
30% reduction, 25 periods
Harmonics: EN 61000-3-2:1995;
IEC 61000-3-2:1995
Flicker: EN 61000-3-3:1995;
IEC 61000-3-3:1994
61
HP ProCurve Mini-GBICs
Used with the following
• HP ProCurve 9300 EP 8-Port Mini-GBIC Redundant
Management Module (J4885A)
• HP ProCurve 9300 EP 16-Port Mini-GBIC Module (J4894A)
• HP ProCurve Switch xl Mini-GBIC Module (J4878A)
• HP ProCurve Switch xl 16-port 10/100/1000 Module
(J4907A)
• HP ProCurve Switch 4160gl (J8152A)
• HP ProCurve Switch 4140gl (J8151A)
• HP ProCurve Switch gl 10/100/1000 Module (J4908A)
• HP ProCurve Switch gl Mini-GBIC Module (J4893A)
• HP ProCurve Switch 2848 (J4904A)
• HP ProCurve Switch 2824 (J4903A)
• HP ProCurve Switch 6108 (J4902A)
• HP ProCurve Switch 2650 (J4899A)
• HP ProCurve Switch 2626 (J4900A)
• HP ProCurve Switch 2650-PWR (J8165A)
• HP ProCurve Switch 2626-PWR (J8164A)
Ports
One 1000Base-SX port (IEEE 802.3z Type 1000Base-SX)
Connector: LC
Duplex: full
HP ProCurve Gigabit-SX-LC Mini-GBIC (J4858A)
with one 1000Base-SX port
Physical characteristics
Dimensions: 2.28 x 0.51 x 0.51 in.
(5.79 x 1.30 x 1.30 cm)
Weight: 0.04 lb. (0.02 kg)
Ports
One 1000Base-LX port (IEEE 802.3z Type 1000Base-LX)
Connector: LC
Duplex: full
HP ProCurve Gigabit-LX-LC Mini-GBIC (J4859A)
with one 1000Base-LX port
HP ProCurve Gigabit-LH-LC Mini-GBIC (J4860A)
with one 1000Base-LH port
62
Physical characteristics
Dimensions: 2.28 x 0.51 x 0.51 in.
(5.79 x 1.30 x 1.30 cm)
Weight: 0.04 lb. (0.02 kg)
Ports
One 1000Base-LH port (no IEEE standard exists for
1550 nm optics)
Connector: LC
Duplex: full
Cabling
Type: 62.5/125 µm or 50/125 µm (core/cladding)
diameter, graded-index, low metal content,
multimode fiber-optic, complying with ITU-T G.651
and ISO/IEC 793-2 Type A1b or A1a, respectively
Maximum distance:
• 220m (62.5 µm core diameter, 160 MHz x km
bandwidth)
• 275m (62.5 µm core diameter, 200 MHz x km
bandwidth)
• 500m (50 µm core diameter, 400 MHz x km
bandwidth)
• 550m (50 µm core diameter, 500 MHz x km
bandwidth)
Cabling
Type: either single mode or multimode
• 9/125 µm (core/cladding) diameter, 1310 nm, low
metal content, single mode fiber-optic, complying
with ITU-T G.652 and ISO/IEC 793-2 Type B1
• 62.5/125 µm or 50/125 µm (core/cladding)
diameter, graded-index, low metal content,
multimode fiber-optic, complying with ITU-T G.651
and ISO/IEC 793-2 Type A1b or A1a, respectively
(a mode conditioning patch cord may be needed in
some multimode fiber installations)
Maximum distance: 10 km (single mode) or 550m
(multimode)
Cabling
Type: 9/125 µm (core/cladding) diameter, 1550 nm,
low metal content, single mode fiber-optic, complying
with ITU-T G.652 and ISO/IEC 793-2 Type B1
Maximum distance: 70 km
Physical characteristics
Dimensions: 2.28 x 0.51 x 0.51 in.
(5.79 x 1.30 x 1.30 cm)
Weight: 0.04 lb. (0.02 kg)
Services for accessories are covered under the product in which they are installed.
HP ProCurve Transceivers
Used with the following
•
•
•
•
•
•
HP
HP
HP
HP
HP
HP
ProCurve
ProCurve
ProCurve
ProCurve
ProCurve
ProCurve
Switch
Switch
Switch
Switch
Switch
Switch
gl Transceiver Module (J4863A)
2524 (J4813A)
2512 (J4812A)
2324 (J4818A)
2312 (J4817A)
2124 (J4868A)—only the HP ProCurve 100-FX SC Transceiver (J4853A)
Ports
2 Gigabit transceivers (1 HSSDC port each)
Connector: HSSDC
Duplex: full
HP ProCurve Switch Gigabit Stacking Kit (J4116A)
with 2 Gigabit transceivers plus interconnecting cable
Physical characteristics
Dimensions: 3.8 x 2.05 x 0.95 in.
(9.65 x 5.21 x 2.41 cm)
Weight: 0.09 lb. (0.04 kg)
Ports
One 1000Base-SX port (IEEE 802.3z Type 1000Base-SX)
Connector: SC
Duplex: full
HP ProCurve Gigabit SX Transceiver (J4131B)
with one 1000Base-SX port
Physical characteristics
Dimensions: 3.8 x 2.05 x 0.95 in.
(9.65 x 5.21 x 2.41 cm)
Weight: 0.09 lb. (0.04 kg)
Ports
One 1000Base-LX port (IEEE 802.3z Type 1000Base-LX)
Connector: SC
Duplex: full
HP ProCurve Gigabit LX Transceiver (J4132A)
with one 1000Base-LX port
Services for accessories are covered under the product in which they are installed.
Cabling
Type: included with product
Maximum distance: 23.5 in.
Physical characteristics
Dimensions: 3.8 x 2.05 x 0.95 in.
(9.65 x 5.21 x 2.41 cm)
Weight: 0.09 lb. (0.04 kg)
Cabling
Type: 62.5/125 µm or 50/125 µm (core/cladding)
diameter, graded-index, low metal content,
multimode fiber-optic, complying with ITU-T G.651
and ISO/IEC 793-2 Type A1b or A1a, respectively
Maximum distance:
• 220m (62.5 µm core diameter, 160 MHz x km
bandwidth)
• 275m (62.5 µm core diameter, 200 MHz x km
bandwidth)
• 500m (50 µm core diameter, 400 MHz x km
bandwidth)
• 550m (50 µm core diameter, 500 MHz x km
bandwidth)
Cabling
Type: either single mode or multimode
• 9/125 µm (core/cladding) diameter, 1310 nm, low
metal content, single mode fiber-optic, complying
with ITU-T G.652 and ISO/IEC 793-2 Type B1
• 62.5/125 µm or 50/125 µm (core/cladding)
diameter, graded-index, low metal content,
multimode fiber-optic, complying with ITU-T G.651
and ISO/IEC 793-2 Type A1b or A1a, respectively
(a mode conditioning patch cord may be needed in
some multimode fiber installations)
Maximum distance: 10 km (single mode) or 550m
(multimode)
63
HP ProCurve Transceivers
Used with the following
•
•
•
•
•
•
HP
HP
HP
HP
HP
HP
ProCurve
ProCurve
ProCurve
ProCurve
ProCurve
ProCurve
Switch
Switch
Switch
Switch
Switch
Switch
HP ProCurve 100/1000-T Transceiver (J4834A)
with one 100/1000 auto-sensing port
gl Transceiver Module (J4863A)
2524 (J4813A)
2512 (J4812A)
2324 (J4818A)
2312 (J4817A)
2124 (J4868A)—only the HP ProCurve 100-FX SC Transceiver (J4853A)
Ports
One 100/1000 auto-sensing port (IEEE 802.3u
100Base-TX and IEEE 802.3ab 1000Base-T)
Connector: RJ-45
Duplex:
• 100Base-TX: half or full
• 1000Base-T: full
Physical characteristics
Dimensions: 3.8 x 2.05 x 0.95 in.
(9.65 x 5.21 x 2.41 cm)
Weight: 0.11 lb. (0.05 kg)
Ports
One 100Base-FX (IEEE 802.3u Type 100Base-FX)
Connector: SC
Duplex: half or full (full duplex only when installed in
unmanaged switches)
HP ProCurve 100-FX SC Transceiver (J4853A)
with one 100Base-FX port
64
Physical characteristics
Dimensions: 3.8 x 2.05 x 0.95 in.
(9.65 x 5.21 x 2.41 cm)
Weight: 0.09 lb. (0.04 kg)
Cabling
Type:
• 100Base-TX: Category 5 (or better), 100Ω differential
unshielded twisted pair (UTP) or shielded twisted
pair (STP), complying with IEEE 802.3u 100Base-TX
• 1000Base-T: Category 5 (5E or better
recommended), 100Ω differential 4-pair unshielded
twisted pair (UTP) or shielded twisted pair (STP)
balanced, complying with IEEE 802.3ab 1000Base-T
Maximum distance: 100m
Cabling
Type: 62.5/125 µm or 50/125 µm (core/cladding)
diameter, graded-index, multimode fiber-optic,
complying with ITU-T G.651 and ISO/IEC 793-2
Type A1b or A1a, respectively
Maximum distance: 2 km (full-duplex) or 412m (halfduplex)
Services for accessories are covered under the product in which they are installed.
HP ProCurve Redundant and External Power Supply
Used with the following
• HP ProCurve Switch xl 10/100-TX PoE Module (J8161A)
• HP ProCurve Switch 2650-PWR (J8165A)
• HP ProCurve Switch 2626-PWR (J8164A)
• HP ProCurve Switch 2848 (J4904A)
• HP ProCurve Switch 2824 (J4903A)
Physical characteristics
Dimensions: 12.8 x 17.42 x 1.73 in.
(32.52 x 44.25 x 4.4 cm)
Weight: 11.65 lb. (5.24 kg)
HP ProCurve 600 Redundant and External Power Supply
(J8168A)
Provides 12V RPS for up to 6 stackable switches and 2 ports with
370W 50V PoE
HP ProCurve 610 External Power Supply (J8169A)
1RU EPS with 4 EPS ports providing PoE to connected Switch xl 10/100-TX
PoE modules
Environment
Operating temperature: 32°F to 131°F (0°C to 55°C)
Operating relative humidity: 15% to 95% @ 104°F
(40°C), non-condensing
Non-operating/storage temperature: –40°F to 158°F
(–40°C to 70°C)
Non-operating/storage relative humidity: 15% to 95%
@ 149°F (65°C), non-condensing
Altitude: Up to 15,091 ft. (4.6 km)
Physical characteristics
Dimensions: 18.03 x 17.42 x 1.73 in.
(45.8 x 44.25 x 4.39 cm) (1U height)
Weight: 16.85 lb. (7.64 kg)
Environment
Operating temperature: 32°F to 122°F (0°C to 50°C)
Operating relative humidity: 15% to 95% @ 104°F
(40°C), non-condensing
Non-operating/storage temperature: –40°F to 158°F
(–40°C to 70°C)
Non-operating/storage relative humidity: 15% to 95%
@ 149°F (65°C), non-condensing
Altitude: Up to 15,091 ft. (4.6 km)
Services for accessories are covered under the product in which they are installed.
Electrical characteristics
Voltage: 100–120 VAC/200–240 VAC
Current: 6.3A/3.1A
Frequency: 50/60 Hz
Power:
– With EPS but without RPS: 506W
– With EPS and RPS: 760W
Maximum BTUs: 2596
Supports internal power supply redundancy for up to
six devices.
Supports two External PoE devices with up to 370W
at 50V for PoE applications.
Electrical characteristics
Voltage: 100–120 VAC/200–240 VAC
Current: 6.3A/3.1A
Frequency: 50/60 Hz
Total power output for four EPS ports: 1000W
Maximum BTUs: 3415
Supports up to four Switch xl 10/100-TX PoE modules.
Provides redundant and supplemental PoE power for
2650-PWR.
Provides redundant and supplemental PoE power for
2626-PWR.
65
HP ProCurve Wireless Access Point 520wl
HP ProCurve Wireless Access Point 520wl (J8133A)*
The HP ProCurve Wireless Access Point 520wl extends the range of your
cabled environment to an entire building or campus by providing easy
network access for mobile users or for hard-to-wire locations, such as
conference rooms. The Access Point 520wl is a high-performance bridge
that features roaming, automatic channel selection, and Web-based
configuration and management. It cost-effectively responds to the growing
demands of enterprise and small-business users for anytime, anywhere
access to files, e-mail, and the Internet. The Access Point 520wl supports
up to 250 wireless clients per radio slot and 64- and 128-bit RC4 Wired
Equivalent Privacy (WEP) encryption.
* This product requires an HP ProCurve Wireless 802.11b Access Point Card 150wl, 802.11a Access Point Kit 160wl,
or 802.11g Access Point Card 170wl (ordered separately).
66
HP ProCurve Wireless Access Point 520wl
Features and benefits
• High speed (54 Mbps) IEEE 802.11g support: allows
for selecting either IEEE 802.11b, 802.11g, or
802.11g with fallback support for 802.11b; requires
HP ProCurve 802.11g Access Point Card 170wl
• Investment protection: the 520wl dual-slot, cardbus
architecture provides users with the ability to support
simultaneous, tri-mode (802.11 a, b, and g) operation
by simply adding the appropriate HP ProCurve Access
Point card
• Secure mobility:
– 802.1X port-based access control: secure yet flexible
user authentication safeguards access to the wireless
network; 802.1X support includes MD5, TLS, TTLS,
and PEAP
– Enhanced encryption management: per user/
per session dynamic WEP key assignment and
automatic key replacement significantly enhances
wireless data privacy*
– 16 VLAN and SSID support per radio card:
802.1Q compliant VLAN assignment based on
SSID association controls user access to network
resources*
– Wi-Fi Protected Access™: combines 802.1X user
authentication with enhanced, industry-compatible
encryption (TKIP) to secure network access and
wireless data traffic*
– Unauthorized access point detection (rogue AP):
The access point employs both active and passive
scanning to detect and report all active access points
operating within range of the access point. Data from
each scan is stored in the access point, available for
query or sent to a management console using SNMP
traps. Between user-configurable wireless network
scans, SNMP traps are immediately generated upon
detection of a new access point.**
• Wireless (bridge) access point repeating: up to six
wireless links are supported in each access point
520wl, with two configurations possible:
– Single-radio configuration—supports wireless traffic to
additional wireless bridge relay 520wl access points
and local wireless clients within the cell
– Dual-radio configuration—one radio supports wireless
traffic to other wireless bridge relay 520wl access
points; the second radio supports local wireless clients
within the cell
– Wireless bridging supported on IEEE 802.11a, -b,
and -g HP ProCurve Access Point radios
• Auto Channel Select (ACS): Tests available channels
and selects one based on signal strength. The available
channel range is set by the regulatory agency
responsible for your geographic region. The Access
Point 520wl scans appropriate channels and selects the
radio frequency channel with the best signal-to-noise
ratio (in other words, signal strength).
** Feature requires use of HP ProCurve 802.11g Access Point Card 170wl.
** Feature requires use of HP ProCurve 802.11a Access Point Card 160wl
or 802.11g Access Point Card 170wl.
67
HP ProCurve Wireless Access Point 520wl
Features and benefits (continued)
• Local wireless bridge filter: when enabled, prevents
communication between wireless devices associated
with the same access point
• Remote configuration and management: SNMPv3 and
SSL protects unauthorized access to the management
interface
• Adjustable output power: controls cell size for highdensity deployments*
• Quality of service: support for quality of service protocol
on Spectralink-based applications
• External antenna connector: supports HP ProCurve
family of 2.4 GHz wireless LAN external antennas and
accessories to enhance wireless LAN deployments
• Software updates: free downloads are available from
the Web
• Dual flash images: enables auto-recovery upon
unsuccessful access point software download
• Lifetime warranty: for as long as you own the product
with next-business-day advance replacement (available
in most countries)
*Feature requires use of HP ProCurve 802.11g Access Point Card 170wl.
Services
• 3-year, 4-hour onsite, 13 x 5 coverage, 13 x 5 phone
support, for hardware (U4683A/E)
• Installation/Configuration Service Level – Sold directly
by HP. Contact HP sales representative.
• 3-year, 4-hour onsite, 24 x 7 coverage, 24 x 7 phone
support, for hardware (U4835A/E)
For details about services and response times in your
area, please contact your local HP sales office.
• 3-year, 4-hour onsite, 24 x 7 coverage for hardware,
24 x 7 software phone support (U6321A/E)
68
HP ProCurve Wireless Access Point 520wl
Specifications
Ports
1 RJ-45 10/100 ports (IEEE 802.3
Type 10Base-T, IEEE 802.3u Type
100Base-TX)
1 RS-232C DB-9 console port
2 CardBus slots support the
following access point cards:
– HP ProCurve Wireless 802.11a
– HP ProCurve Wireless 802.11b
– HP ProCurve Wireless 802.11g
Physical characteristics
Dimensions: 2 x 7.3 x 10.2 in.
(5.08 x 18.54 x 25.91 cm)
Weight: 3.86 lb (1.74 kg)
Memory and processors
SDRAM: 16 MB
Flash ROM memory: 8 MB
Mounting
Includes metal mounting plate for
placement on wall, ceiling, or
table
Environment
Operating
– Temperature: 32°F to 104°F
(0°C to 40°C)
– Relative humidity: 95% to 97%,
non-condensing
Non-operating/Storage
– Temperature: 14°F to 122°F
(–10°C to 50°C)
– Relative humidity: 95% maximum
(non-condensing)
Web interface
Microsoft® Internet Explorer 6 with
SP1 or later
Netscape Navigator 6.1 or higher
Electrical characteristics
Current: 0.7A
Frequency: 47/63 Hz
Safety
UL 60950
IEC 60950
UL 2043
Emissions
FCC Part 15.107 and 15.109,
Class B
ICES-003, Class B
AS/NZS 3548, Class B
EN 55022, Class B
Immunity
EN 55024
Standards, and protocols
RFC 783 TFTP
RFC 951 BootP
RFC 1542 BootP
RFC 854 Telnet
RFC 768 UDP
RFC 792 ICMP
RFC 793 TCP
RFC 826 ARP
IEEE 802.1D Spanning Tree
RFC 2138 RADIUS
RFC 2866 RADIUS accounting
Secure Sockets Layer (SSL)
IEEE 802.1X Network Login
IEEE 802.1Q VLANs
IEEE 802.1Q VLAN tagging
SNMPv1/v2c/v3
HTML and telnet management
RFC 1493 Bridge MIB
RFC 1213 MIB II
RFC 3164 Syslog
IAPP (draft standard)
Features
Common to 802.11a, 802.11b,
and 802.11g networks:
– HTTP, HTTPS interface for
configuration and management
– Telnet/CLI
– SNMPv1, SNMPv2c, secure
SNMPv3 management
– TFTP support
– 2-user VLAN support
– DHCP client
– DHCP server
– 802.1X support for MD5, TLS,
PEAP, and TTLS
– MAC address control table
– Automatic Channel Select
– Roaming
– 64- and 128-bit WEP
encryption
– Multiple RADIUS authentication
server support (primary and
secondary)
– 802.1d bridging with static
MAC address filtering
– Network protocol filtering
– Proxy ARP
– Multicast/Broadcast storm
threshold filtering
– TCP/UDP port filtering
– Intra-cell traffic filtering
– Spanning Tree support
– Standard and Orinoco traps
– Orinoco MIB, Etherlike MIB,
802.11 MIB, Bridge MIB, MIB-II
–
–
–
–
–
–
–
–
Syslog
ICMP echo response
Link integrity
Wireless (repeater) bridging
over IEEE 802.11a, b, and g
networks
Station monitoring statistics
Emergency reset to default
configuration, hardware
watchdog timer
Closed system
Plenum rated
Additionally, applicable to the
802.11g network:
– Wi-Fi Protected Access (WPA)
support
– Per user/per session keying
– 16 user VLAN
– Up to 16 BSSIDs to correspond
to each VLAN assignment
– Rogue access point detection
– Adjustable transmit power
control
Additionally, applicable to the
802.11a network:
– Fragmentation support for
802.11a network
– Up to 50 stations per radio
control
– 802.1X with per user/per
session keying
– Rogue access point detection
HP ProCurve Wireless Access Point 520wl Accessories
Physical characteristics
Dimensions: 4.64 x 2.12 x 0.34 in. (11.79 x 5.38 x
0.86 cm)
Weight: 0.10 lb. (45.36 g)
HP ProCurve Wireless 802.11b Access Point Card
150wl 11 CH (J8135A)
with 11-channel support; for use in North America only
HP ProCurve Wireless 802.11b Access Point Card
150wl 13 CH (J8136A)
Safety
UL 60950; EN 60950
Emissions and immunity
FCC Part 15.107 and 15.109, Class B;
ICES-003, Class B; AS/NZS 3548, Class B;
EN 55022, Class B; EN 55024; EN 301 489-1;
EN 301 489-17
RF exposure
OET-65C; IEEE C95.1; RSS-102
Radio
U.S.: FCC Part 15.247
Canada: RSS-210
EU: EN 300 328-1, EN 300 328-2
Japan: ARIB STD-33, ARIB STD-T66
with 13-channel support; for use in Europe and Asia only (except Japan)
HP ProCurve Wireless 802.11b Access Point Card
150wl 14 CH (J8137A)
with 14-channel support; for use in Japan only
Radio characteristics
802.11b
Modulation technique: direct sequence spread spectrum (CCK, DQPSK, DBPSK)
Spreading: 11-chip Barker Sequence
Media Access Protocol: CSMA/CA (collision avoidance) with ACK
Bit error rate (BER): better than 10–15
Nominal output power: 15 dBm
Data rate
Receiver sensitivity
11 Mbps
–82 dBm
5.5 Mbps
–87 dBm
2 Mbps
–91 dBm
1 Mbps
–94 dBm
The HP ProCurve Wireless 802.11b Access Point Kit 150wl is only supported in the
HP ProCurve Wireless Access Point 520wl.
69
HP ProCurve Wireless Access Point 520wl Accessories
Radio
U.S.: FCC Part 15.407
Canada: RSS-210
EU: EN 301 893
Japan: ARIB STD-T71
Physical characteristics
Dimensions: 11.0 x 9.5 x1.0 in.
(27.94 x 24.13 x 2.54 cm)
Weight: 0.5 lb. (226.8 g)
HP ProCurve Wireless 802.11a Access Point Kit
160wl—North America (J8138A)
Antenna
Two integral omnidirectional 5 dBi antennae
with diversity
0–180 degrees articulation
for use in Canada, United States, and Australia only
HP ProCurve Wireless 802.11a Access Point Kit
160wl—Singapore (J8148A)
Safety
UL 60950
RF exposure
OET-65C; IEEE C95.1; RSS-102
for use in Singapore only
HP ProCurve Wireless 802.11a Access Point Kit
160wl—Europe (J8149A)
for use in selected European countries only
HP ProCurve Wireless 802.11a Access Point Kit
160wl—Japan (J8150A)
for use in Japan only
Emissions and immunity
FCC Part 15.107 and 15.109, Class B;
ICES-003, Class B; AS/NZS 3548, Class B;
EN 55022, Class B; EN 55024; EN 301 489-1;
EN 301 489-17
Radio characteristics
802.11a
Modulation technique: Orthogonal Frequency Division Multiplexing (OFDM) 64 QAM, QPSK, BPSK with rate
fallback
Media Access Protocol: CSMA/CA (Collision Avoidance) with ACK
Nominal output power: will vary with data rate by region (FCC, TELEC, ETSI)
Data rate
Receiver sensitivity
54 Mbps
–65 dBm
48 Mbps
–69 dBm
36 Mbps
–73 dBm
24 Mbps
–77 dBm
Data rate
Receiver sensitivity
18 Mbps
–80 dBm
12 Mbps
–82 dBm
9 Mbps
–84 dBm
6 Mbps
–85 dBm
The HP ProCurve Wireless 802.11a Access Point Kit 160wl is only supported in the
HP ProCurve Wireless Access Point 520wl.
Radio
U.S.: FCC Part 15.247
Canada: RSS-210
EU: EN 300 328-1, EN 300 328-2
Japan: ARIB STD-33, ARIB STD-T66
Physical characteristics
Dimensions: 4.75 x 2 x 0.25 in.
(12.07 x 5.08 x 0.64 cm)
Weight: 0.25 lb. (113.4 g)
HP ProCurve Wireless 802.11g Access Point Card
170wl 11 CH (J8432A)
Antenna
Integrated diversity antenna with MC Card connector
for external antenna use
IEEE 802.11g radio card for 520wl Wireless Access Points, 11-channel
HP ProCurve Wireless 802.11g Access Point Card
170wl 13 CH (J8430A)
Safety
EN 60950; IEC 60950
RF exposure
OET-65C; RSS-102; IEEE C95.1
IEEE 802.11g radio card for 520wl Wireless Access Points, 13-channel
HP ProCurve Wireless 802.11g Access Point Card
170wl 14 CH (J8431A)
IEEE 802.11g radio card for 520wl Wireless Access Points, 14-channel
Emissions and immunity
FCC Part 15.107 and 15.109, Class B;
ICES-003, Class B; AS/NZS 3548, Class B;
EN 55022, Class B; EN 55024; EN 301 489-1;
EN 301 489-17
Radio characteristics
802.11g
Modulation technique: Orthogonal Frequency Division Multiplexing (OFDM) 64 QAM, 16 QAM, QPSK, BPSK
with rate fallback
Media Access Protocol: CSMA/CA (Collision Avoidance) with ACK
Nominal output power: 17 dBm
Data rate
Receiver sensitivity
54 Mbps
–68 dBm
48 Mbps
–70 dBm
36 Mbps
–75 dBm
Data rate
Receiver sensitivity
18 Mbps
–84 dBm
9 Mbps
–88 dBm
6 Mbps
–89 dBm
24 Mbps
–80 dBm
The HP ProCurve Wireless 802.11g Access Point Card 170wl is only supported the
HP ProCurve Wireless Access Point 520wl.
802.11b
Modulation technique: 802.11b Direct Sequence Spread Spectrum (CCK, DQPSK, DBPSK)
Media Access Protocol: CSMA/CA (Collision Avoidance) with ACK
Nominal output power: 15 dBm
Data rate
Receiver sensitivity
70
11 Mbps
–83 dBm
5.5 Mbps
–85 dBm
2 Mbps
–86 dBm
1 Mbps
–90 dBm
HP ProCurve Wireless Access Point 520wl Accessories
Physical characteristics
Dimensions: 9.1 x 1.0 x 0.3 in.
(23.11 x 2.54 x 0.76 cm)
Weight: 0.3 lb. (136.08 g)
Base diameter: 2.8 in. (7.11 cm)
Mounting
Table stand and wall mounting bracket
HP ProCurve Wireless Range Extender Antenna
100wl (J8134A)
with 2.5 dBi indoor omnidirectional antenna
Cable length
59 in. (1.5 m)
Connector
Proprietary (FCC compliant)
Environment
Operating
– Temperature: 32º to 131ºF (0º to 55ºC)
– Relative humidity: 10% to 90% non-condensing
Non-operating/Storage
– Temperature: 14º to 140ºF (–10º to 60ºC)
– Relative humidity: 0% to 90% non-condensing
Gain
2.5 dBi
Frequency range
2400–2484 MHz
For use with Access Point Cards 150wl and 170wl
Performance
Open office: 50% increase over standard range
Antenna pattern: omnidirectional
Semi-open office: 15% increase over standard range
Antenna diversity: yes
Additional accessories
HP ProCurve 6 dBi indoor/outdoor omnidirectional antenna (J8441A) See page 82 for details.
HP ProCurve 6 dBi indoor/outdoor directional antenna (J8443A) See page 82 for details.
HP ProCurve 8 dBi outdoor omnidirectional antenna (J8444A) See page 83 for details.
HP ProCurve 11 dBi indoor/outdoor wide angle directional antenna (J8446A) See page 83 for details.
HP ProCurve MC-Card to R-SMA cable (J8447A) See page 84 for details.
HP ProCurve 14 dBi yagi antenna (J8448A) See page 84 for details.
71
HP ProCurve Wireless Access Point 420
HP ProCurve Wireless Access Point 420 NA (J8130A)—North America only
HP ProCurve Wireless Access Point 420 WW (J8131A)—All other countries
The Wireless Access Point 420 is a full-featured IEEE 802.11g,
single-radio access point ideally suited for medium to large
wireless LAN deployments. With integrated 802.3af Power
over Ethernet, the HP ProCurve Wireless Access Point 420
offers a cost-effective means to deploy either an 802.11b or
802.11g wireless network. The Access Point 420 addresses
wireless security concerns by delivering the latest security
based on industry standards, including support for IEEE
802.1X with per user/per session encryption, Wi-Fi Protected
Access,™ and multiple VLAN support.
72
HP ProCurve Wireless Access Point 420
Features and benefits
• Secure mobility:
– 802.1X port-based access control: secure yet flexible
user authentication safeguards access to the wireless
network; 802.1X support includes MD5, TLS, TTLS,
and PEAP
– Enhanced encryption management: per user/per
session dynamic WEP key assignment and automatic
key replacement significantly enhances wireless data
privacy
– 802.1Q compliant VLAN support and tagging:
64 VLANs capable of being independently mapped
to RADIUS server attributes
– Wi-Fi Protected Access™: combines 802.1X user
authentication with enhanced, industry-compatible
encryption (TKIP) to secure network access and
wireless data traffic
• IEEE 802.11g single-radio design: allows for selecting
either IEEE 802.11b, 802.11g, or 802.11g with fallback
support for 802.11b
• IEEE 802.3af Power over Ethernet support: simplifies
deployment and dramatically reduces installation costs
• Detachable antenna design: enables use of external
antenna configurations for improved radio coverage
• Auto channel selection: simplifies access deployment
by testing all available channels and selecting the best
channel based on signal-to-noise ratio
• Remote configuration and management: through Web
browser or command line interface (CLI)
• Dual flash images: enables auto-recovery upon
unsuccessful software download
• Adjustable output power: controls cell size for highdensity deployments
• International country configuration: select the
appropriate country and the access point automatically
configures operation to match regulatory requirements
(model J8131A only)
• Local wireless bridge filter: when enabled, prevents
communication between wireless devices associated
with the same access point
• Interoperability: Wi-Fi CERTIFIED™ to ensure IEEE
802.11g and multivendor interoperability
• Software updates: free downloads are available from
the Web
• Lifetime warranty: for as long as you own the product,
with next-business-day advance replacement (available
in most countries)
Services
• 3-year, 4-hour onsite, 13 x 5 coverage, 13 x 5 phone
support, for hardware (U4683A/E)
• Installation/Configuration Service Level – Sold directly
by HP. Contact HP sales representative.
• 3-year, 4-hour onsite, 24 x 7 coverage, 24 x 7 phone
support, for hardware (U4835A/E)
For details about services and response times in your
area, please contact your local HP sales office.
• 3-year, 4-hour onsite, 24 x 7 coverage for hardware,
24 x 7 software phone support (U6321A/E)
73
HP ProCurve Wireless Access Point 420
Specifications
Ports
1 RJ-45 10/100 ports (IEEE 802.3
Type 10Base-T, IEEE 802.3u
Type 100Base-TX)
1 RS-232C DB-9 console port
Physical characteristics
Dimensions: 5.41 x 8.59 x 1.29 in.
(13.73 x 21.83 x 3.27 cm)
Weight: 2.27 lb (1.02 kg)
including mounting bracket
Memory and processors
Flash capacity: 4 MB
Mounting
Includes wall mount bracket and
related hardware
Environment
Operating
– Temperature: 32°F to 104°F
(0°C to 40°C)
– Relative humidity: 15% to 95%,
noncondensing
Non-operating/Storage
– Temperature: –40 °F to 158°F
(–40°C to 70°C)
– Relative humidity: 95% maximum
(non-condensing)
Web interface
Microsoft® Internet Explorer 5.5 or
higher
Netscape Navigator 6.0 or higher
Electrical characteristics
Maximum BTUs: 102 BTU/hr
Voltage: 100–240 VAC
Current: 0.4A
Power: 30W
Frequency range: 50/60 Hz
Radio
FCC Part 15.247
IC RSS-210
EN 300-328-1
EN 300-328-2
ARIB STD-T66
ARIB STD-33
Safety
UL 60950
UL 2043
EN 60950/IEC 60950
Emissions
EN 55022, Class B
AS/NZS 3548, Class B
ICES-003, Class B
FCC Part 15.107 and 15.109,
Class B
RF exposure
OET-65C
IEEE C95.1
RSS-102
Immunity
EN 55024
EN 301-489-1
EN 301-489-17
Standards and protocols
RFC 783 TFTP
RFC 854 Telnet
RFC 768 UDP
RFC 792 ICMP
RFC 793 TCP
RFC 826 ARP
RFC 2030 SNTP
RFC 2138 RADIUS
IEEE 802.1X Network Login
IEEE 802.1Q VLANs
802.3af Power over Ethernet
IEEE 802.1Q VLAN tagging
SNMPv1/v2c
HTML and telnet management
RFC 1213 MIB II
RFC 3164 Syslog
IAPP (draft standard)
Radio characteristics
802.11g
Modulation technique: Orthogonal Frequency Division Modulation (64 QAM, 16 QAM, QPSK, BPSK)
Media Access Protocol: CSMA/CA (Collision Avoidance) with ACK
Nominal output power: 15 dBm
Data rate
Receiver sensitivity
54 Mbps
–70 dBm
48 Mbps
–73 dBm
36 Mbps
–75 dBm
24 Mbps
–80 dBm
Data rate
Receiver sensitivity
18 Mbps
–82 dBm
12 Mbps
–85 dBm
9 Mbps
–85 dBm
6 Mbps
–87 dBm
802.11b
Modulation technique: 802.11b Direct Sequence Spread Spectrum (CCK, DQPSK, DBPSK)
Media Access Protocol: CSMA/CA (Collision Avoidance) with ACK
Nominal output power: 15 dBm
Data rate
Receiver sensitivity
11 Mbps
–87 dBm
5.5 Mbps
–90 dBm
2 Mbps
–90 dBm
1 Mbps
–93 dBm
Additional accessories
HP ProCurve 6 dBi indoor/outdoor omnidirectional antenna (J8441A) See page 82 for details.
HP ProCurve 2 dBi indoor omnidirectional diversity antenna (J8442A) See page 82 for details.
HP ProCurve 6 dBi indoor/outdoor directional antenna (J8443A) See page 82 for details.
HP ProCurve 8 dBi outdoor omnidirectional antenna (J8444A) See page 83 for details.
HP ProCurve 6.5 dBi indoor/outdoor directional diversity antenna (J8445A) See page 83 for details.
HP ProCurve 11 dBi indoor/outdoor wide angle directional antenna (J8446A) See page 83 for details.
74
Features
Hardware reset button
External antenna connectors
(R-SMA)
Plenum rating
Kensington security slot
Wi-Fi CERTIFIED
HTTP interface for configuration
and management
Telnet/CLI
SNMP agent
DHCP client
Roaming
802.1X support for MD5, TLS,
TTLS, and PEAP
Dynamic per user/per session
encryption keys
Wi-Fi Protected Access (WPA)
64, 128, 152 bit WEP encryption
128 bit AES encryption
Local MAC address filtering
RADIUS MAC address
authentication
Reverse ARP
Syslog
Adjustable power output
Auto channel selection
64 VLANs
Closed system
Local wireless bridge filtering
Selectable long or short preamble
Selectable beacon interval
Selectable DTIM interval
Selectable RTS/CTS
Selectable fragmentation threshold
Power over Ethernet Class 0
HP ProCurve Secure Access
700wl Series
HP ProCurve Access Controller 720wl
(J8153A)
HP ProCurve Access Control Server
740wl (J8154A)
HP ProCurve Integrated Access Manager
760wl (J8155A)
The HP ProCurve Secure Access 700wl series products offer
powerful solutions for controlling and managing access to
network resources across wireless LANs of all sizes.
The HP ProCurve Access Controller 720wl resides
between wireless access points and the network and
enforces user authentication and access rights based on
the point of network access and time of day. To ensure
the highest level of data privacy, the Access Controller
720wl offers a choice of robust industry-standard security
protocols to protect data transmitted between the network
and wireless clients—at the edge, where your network is
most vulnerable. The Access Controller 720wl manages
all user sessions on connected access points, maintains
session persistence, and enforces policy rights of users
as they roam from one subnet to another. The Access
Controller 720wl tracks all network activity and provides
a detailed history of all user network activity.
75
HP ProCurve Secure Access 700wl Series
The HP ProCurve Access Control Server 740wl provides
centralized security configuration and policy management
for all users of the wireless network—as well as secure,
uninterrupted sessions as users roam between access
points and across subnets. Centralized policy
management allows quick and efficient updating of user
rights—consolidated into one location. The Access
Control Server 740wl seamlessly integrates into a network
infrastructure, leveraging existing authentication services
to authorize user access. Maintaining constant
communication with all HP ProCurve access controllers,
the Access Control Server 740wl coordinates all user
activity including updating network access rights based
on the user’s policy rights, physical location, or time of
day. Capable of managing thousands of users, the
HP ProCurve Access Control Server 740wl easily adapts
to the deployment of additional access controllers to
expand wireless coverage as the need arises.
Features and benefits
For smaller wireless LAN or branch office deployments,
the HP ProCurve Integrated Access Manager 760wl
combines the enforcement of user policies, wireless data
privacy, and roaming functionality of the Access Controller
720wl with the centralized security configuration and
policy management functionality of the Access Control
Server 740wl—in an all-in-one solution.
•Centralized management and browser-based UI:
– Provides quick and efficient updating to user rights—
all consolidated into one location
– Shortens the administrator learning curve with secure
and intuitive user interface
The HP ProCurve Networking team understands that
it is imperative to have your network working properly.
HP offers services designed to integrate your new secure
mobility solution into your existing network infrastructure
by coordinating the installation, configuration, and
verification of your new products. Because ensuring
security is such a high priority, it is essential that you
have a certified HP reseller assess and design the right
secure mobility solution to fit your needs. For a list of
HP ProCurve certified resellers near you, go to
www.hp.com/go/hpprocurve.
•Wireless data privacy:
– Uses IPSec, PPTP, L2TP/IPSec, or SSH tunnels to
encrypt wireless traffic with DES, 3DES, Blowfish,
CAST, or AES to provide the utmost in data privacy
– User authentication and appropriate access to
network resources can be controlled at the edge of
the network since all secure tunnels terminate within
the HP ProCurve Access Controller 720wl or
Integrated Access Manager 760wl
•Rights-based network access control and management:
– Blocks all user traffic until the user is authenticated
– Allows only traffic designated by a user’s access
privileges
– Gives network administrators the flexibility to configure
access rights based on user, group, time, and location
•Scalable:
– Grows cost-effectively as the wireless LAN expands
– Access Controller 720wl and Integrated Access
Manager 760wl include three additional slots for
expanding capabilities as network needs grow or
change
– Includes 4 10/100Base-T Ethernet ports with
expansion capability of up to 12 ports
•Hardware encryption acceleration (optional): increases
data throughput by offloading DES and 3DES encryption
processing on either the HP ProCurve Access Controller
720wl or Integrated Access Manager 760wl platforms
– Enhances overall encryption performance during peak
user activity
•Roaming across subnets: ensures that users maintain
persistent connectivity to the network and applications
•No client configuration: lowers operating costs and
saves time by eliminating the need to change network
settings or install client software
•Standards-based authentication support for LDAP, Active
Directory, 802.1X, RADIUS, Kerberos, and Windows®
2000/NT® domain: seamlessly integrates into existing
authentication servers or uses the built-in database
76
HP ProCurve Secure Access 700wl Series
Features and benefits (continued)
•802.1Q VLAN support:
– Supports standards-based tagging based on user or
point of network access
– Allows placement of wireless traffic on separate
VLANs
– Provides application of filters based on VLAN ID
•Complete session logging: provides detailed information
for problem identification and resolution
•Misconfigured service management and proxy
redirection: allow secure, transparent login for guests
or users who have changed their configurations
•Simultaneous guest and trusted user access: allow
trusted users and guests simultaneous network access
with different access privileges
•Anti-MAC address spoofing: prevents untrusted users
from gaining access by spoofing a trusted user’s MAC
address
•High-speed backbone connectivity: connectivity to a
Gigabit Ethernet backbone
•Industry-leading warranty: one year with next-businessday advance replacement (available in most countries)
with extensions available
Services
HP ProCurve Access Controller 720wl and Access Control
Server 740wl:
• 3-year, 4-hour onsite, 13 x 5 coverage, 13 x 5 phone
support, for hardware (U6449A/E)
• 3-year, 4-hour onsite, 24 x 7 coverage, 24 x 7 phone
support, for hardware (U6448A/E)
• 3-year, 4-hour onsite, 24 x 7 coverage for hardware,
24 x 7 software phone support (U6322A/E)
• 1-year, post-warranty, parts only, global next-day
advance exchange (U8142PA/PE)
• 1-year, post-warranty, 4-hour onsite, 13 x 5 coverage
for hardware (U8143PA/PE)
• 1-year, post-warranty, 4-hour onsite, 24 x 7 coverage
for hardware (U8144PA/PE)
• Installation/Configuration Service Level – Sold directly
by HP. Contact HP sales representative.
HP ProCurve Integrated Access Manager 760wl:
• 3-year, 4-hour onsite, 13 x 5 coverage, 13 x 5 phone
support, for hardware (U6451A/E)
• 3-year, 4-hour onsite, 24 x 7 coverage, 24 x 7 phone
support, for hardware (U6450A/E)
• 3-year, 4-hour onsite, 24 x 7 coverage for hardware,
24 x 7 software phone support (U6323A/E)
• 1-year, post-warranty, parts only, global next-day
advance exchange (U8145PA/PE)
• 1-year, post-warranty, 4-hour onsite, 13 x 5 coverage
for hardware (U8146PA/PE)
• 1-year, post-warranty, 4-hour onsite, 24 x 7 coverage
for hardware (U8147PA/PE)
• Installation/Configuration Service Level – Sold
directly by HP. Contact HP sales representative.
For details about services and response times in your
area, please contact your local HP sales office.
77
HP ProCurve Secure Access 700wl Series
Specifications
HP ProCurve Access Controller 720wl (J8153A)
HP ProCurve Access Controller 740wl (J8154A)
HP ProCurve Access Controller 760wl (J8155A)
1 RJ-45 10/100 port (IEEE 802.3 Type 10Base-T,
IEEE 802.3u Type 100Base-TX, IEEE 802.3ab
1000Base-T Gigabit Ethernet)
2 open module slots
1 RS-232C DB-9 console port
1 secure access 4-port 10/100 card (J8156A)
included
1 RJ-45 10/100 port (IEEE 802.3 Type 10Base-T,
IEEE 802.3u Type 100Base-TX, IEEE 802.3ab
1000Base-T Gigabit Ethernet)
3 open module slots
1 RS-232C DB-9 console port
1 RJ-45 10/100 port (IEEE 802.3 Type 10Base-T,
IEEE 802.3u Type 100Base-TX, IEEE 802.3ab
1000Base-T Gigabit Ethernet)
2 open module slots
1 RS-232C DB-9 console port
1 secure access 4-port 10/100 card (J8156A)
included
Weight
17.3 x 15.6 x 3.5 in. (43.94 x 39.62 x 8.89 cm)
(2U height)
18 lb (8.1 kg)
17.3 x 15.6 x 3.5 in. (43.94 x 39.62 x 8.89 cm)
(2U height)
18 lb (8.1 kg)
17.3 x 15.6 x 3.5 in. (43.94 x 39.62 x 8.89 cm)
(2U height)
18 lb (8.1 kg)
Environment
Operating temperature
Operating relative humidity
Non-operating/storage temperature
41°F to 104°F (5°C to 40°C)
5% to 90% (non-condensing)
–13°F to 158°F (–25°C to 70°C)
41°F to 104°F (5°C to 40°C)
5% to 90% (non-condensing)
–13°F to 158°F (–25°C to 70°C)
41°F to 104°F (5°C to 40°C)
5% to 90% (non-condensing)
–13°F to 158°F (–25°C to 70°C)
Electrical characteristics
Voltage
Current
Power
Frequency
100–240 VAC
6A/3A
350W
50/60 Hz
100–240 VAC
6A/3A
350W
50/60 Hz
100–240 VAC
6A/3A
350W
50/60 Hz
Safety
UL 60950
UL 60950
UL 60950
Ports
Physical characteristics
Dimensions
78
HP ProCurve Secure Access 700wl Series
Accessories
HP ProCurve Secure Access 700wl 4-Port 10/100 Card
(J8156A)
with 4 auto-sensing 10/100 ports
Ports
4 auto-sensing 10/100 ports (IEEE 802.3 Type
10Base-T; 802.3u Type 100Base-TX)
Connector: RJ-45
Physical characteristics
Dimensions: 6.75 x 5 x 0.75 in.
(17.1 x 12.7 x 1.9 cm)
Weight: 0.26 lb. (0.12 kg)
Ports
One 1000Base-SX port (IEEE 802.3z Type 1000Base-SX)
Connector: LC
HP ProCurve Secure Access 700wl 1-Port Gigabit-SX Card
(J8157A)
with one 1000Base-SX port
Physical characteristics
Dimensions: 7 x 4.75 x 0.75 in.
(17.8 x 12.1 x 1.9 cm)
Weight: 0.17 lb. (0.08 kg)
Ports
One 1000Base-LX port (IEEE 802.3z Type 1000Base-LX)
Connector: LC
HP ProCurve Secure Access 700wl 1-Port Gigabit-LX Card
(J8158A)
with one 1000Base-LX port
Services for accessories are covered under the product in which they are installed.
Physical characteristics
Dimensions: 7 x 4.75 x 0.75 in.
(17.8 x 12.1 x 1.9 cm)
Weight: 0.15 lb. (0.06 kg)
Cabling
Type:
• 10Base-T: Category 3 (or better), 100Ω differential
unshielded twisted pair (UTP) or shielded twisted
pair (STP), complying with IEEE 802.3 Type 10Base-T
specifications
• 100Base-TX: Category 5 (or better), 100Ω
differential unshielded twisted pair (UTP) or shielded
twisted pair (STP), complying with IEEE 802.3u
100Base-TX
Maximum distance: 100m
Cabling
Fiber-optic cable lengths up to 275m at 62.5 µm, 550m
at 50 µm
Type: 62.5/125 µm or 50/125 µm (core/cladding)
diameter, graded-index, low metal content,
multimode fiber-optic, complying with ITU-T G.651
and ISO/IEC 793-2 Type A1b or A1a, respectively
Maximum distance:
• 220m (62.5 µm core diameter, 160 MHz x km
bandwidth)
• 275m (62.5 µm core diameter, 200 MHz x km
bandwidth)
• 500m (50 µm core diameter, 400 MHz x km
bandwidth)
• 550m (50 µm core diameter, 500 MHz x km
bandwidth)
Cabling
Fiber-optic cable lengths up to 550m at 62.5 or 50 µm
in multi-mode, 5 km at 9 µm in single mode
Type: either single mode or multimode
• 9/125 µm (core/cladding) diameter, 1310 nm, low
metal content, single mode fiber-optic, complying
with ITU-T G.652 and ISO/IEC 793-2 Type B1
• 62.5/125 µm or 50/125 µm (core/cladding)
diameter, graded-index, low metal content,
multimode fiber-optic, complying with ITU-T G.651
and ISO/IEC 793-2 Type A1b or A1a, respectively
(a mode conditioning patch cord may be needed in
some multimode fiber installations)
Maximum distance: 5 km (single mode) or 550m
(multimode)
79
HP ProCurve Secure Access 700wl Series
Accessories
HP ProCurve Secure Access 700wl 1-Port
10/100/1000Base-T Card (J8159A)
with one auto-sensing 10/100/1000 port
Ports
1 auto-sensing 10/100/1000 port (IEEE 802.3 Type
10Base-T; 802.3u Type 100Base-TX; 802.3ab Type
1000Base-T)
Connector: RJ-45
Physical characteristics
Dimensions: 5.25 x 4.75 x 0.75 in.
(13.3 x 12.1 x 1.9 cm)
Weight: .11 lb. (0.05 kg)
Cabling
Type:
• 10Base-T: Category 3 (or better), 100Ω differential
unshielded twisted pair (UTP) or shielded twisted
pair (STP), complying with IEEE 802.3 Type 10Base-T
specifications
• 100Base-TX: Category 5 (or better), 100Ω differential
unshielded twisted pair (UTP) or shielded twisted
pair (STP), complying with IEEE 802.3u 100Base-TX
• 1000Base-T: Category 5 (5E or better recommended),
100Ω differential 4-pair unshielded twisted pair
(UTP) or shielded twisted pair (STP), complying with
IEEE 802.3ab 1000Base-T
Maximum distance: 100m
Ports
1 auto-sensing 10/100/1000 port (IEEE 802.3 Type
10Base-T; 802.3u Type 100Base-TX; 802.3ab Type
1000Base-T)
HP ProCurve Secure Access 700wl Acceleration Card
(J8160A)
Accelerates the cryptographic functions of DES, 3DES, HMAC-SHA-1,
HMAC-MD5 encrypted data
80
Physical characteristics
Dimensions: 7 x 4.7 x 0.75 in.
(17.8 x 11.9 x 1.9 cm)
Weight: 0.17 lb. (0.08 kg)
Services for accessories are covered under the product in which they are installed.
HP ProCurve External Access Point Antennas
HP ProCurve External Access Point Antennas
Certified for use with HP ProCurve 420 and 520wl wireless
access points, HP ProCurve family of access point antennas
are specifically designed to meet the needs of today’s most
demanding wireless LAN deployments. HP ProCurve external
antennas provide additional gain and shaping of RF signals
to enhance coverage and radio signal predictability. The
result is a highly reliable and scalable wireless network.
Whether extending wireless connectivity within an office
setting, warehouse, or retail environment or enabling campuswide indoor and outdoor coverage, each external antenna
includes the necessary installation hardware to quickly install
a robust wireless network across an entire campus or for
in-building environments.
81
HP ProCurve External Access Point Antennas
Features and benefits
• High gain omni or directional antennas: provide
the installer with specific RF pattern characteristics
to increase wireless coverage and signal gain or to
overcome physical and RF interference conditions
• Choice of mounting options: ease of deployment—each
HP ProCurve antenna includes the necessary mounting
hardware to quickly get a wireless LAN network up and
running
• Choice of indoor and outdoor antennas: extend
the reach of a HP ProCurve wireless LAN within an
office setting, warehouse, or retail environment or
for campus-wide indoor and outdoor coverage
• Certified external antennas: specifically designed and
certified for use with HP ProCurve wireless access points
• Lifetime warranty: for as long as you own the product
with next-business-day advance replacement (available
in most countries)
Specifications
HP ProCurve 6 dBi indoor/outdoor
omnidirectional antenna (J8441A)
HP ProCurve 2 dBi indoor
omnidirectional diversity antenna (J8442A)
HP ProCurve 6 dBi indoor/outdoor
directional antenna (J8443A)
Frequency (MHz)
2400–2500
2400–2500
2400–2500
Gain dBi (with antenna cable)
4.7
1.7
6
VSWR max
1:7:1
1:7:1
1:7:1
E-Plane (3 dB beamwidth)
31 degrees
80 degrees
50 degrees
H-Plane (3 dB beamwidth)
Omnidirectional
Omnidirectional
65 degrees
Polarization
Linear (vertical)
Linear
Linear (vertical)
Impedance (Ohms)
50
50
50
Weight
0.41 lb. (0.14 kg)
0.4 lb. (0.18 kg)
0.5 lb (0.23 kg)
Mounting style
Ceiling T-bar, I-beam, or mast
Ceiling T-bar mount, recess T-bar spacers
Flush wall mount, articulating wall, or mast
Front-to-back ratio (dB)
n/a
n/a
12
Dimensions
n/a
5.4 x 2.9 x 0.9 in. (13.7 x 7.4 x 2.3 cm)
4.6 x 3.8 x 1.2 in. (11.7 x 9.7 x 3.0 cm)
Height
11.5 in. (29.2 cm)
n/a
n/a
Wind surface area
0.08 ft2 (0.007 m2)
n/a
n/a
Wind survival
125 mph (200 km/hr)
n/a
n/a
Enclosure
Polycarbonate
ASA
UV stable PVC
Grounding
n/a
DC
n/a
RF connector
Reverse SMA (male)
Reverse SMA (male)
Reverse SMA (male)
Cable length
33“
33“
68“
Storage temperature
–40 to 149°F (–40 to +65°C)
–40 to 149°F (–40 to +65°C)
–40 to 149°F (–40 to +65°C)
Operating temperature
–22 to 131°F (–30 to +55°C)
–22 to 131°F (–30 to +55°C)
–22 to 131°F (–30 to +55°C)
Certified for use on the following
HP ProCurve wireless access points
Wireless Access Point 420
Wireless Access Point 520wl
Wireless Access Point 420
Wireless Access Point 420
Wireless Access Point 520wl
Regulatory restrictions
None
None
None
82
HP ProCurve External Access Point Antennas
Specifications
HP ProCurve 8 dBi outdoor
omnidirectional antenna (J8444A)
HP ProCurve 6.5 dBi indoor/outdoor
directional diversity antenna (J8445A)
HP ProCurve 11 dBi indoor/outdoor
wide angle directional antenna (J8446A)
Frequency (MHz)
2400–2500
2400–2500
2400–2500
Gain dBi (with antenna cable)
7.2
6.5
10.2
VSWR max
1:5:1
1:7:1
1:7:1
E-Plane (3 dB beamwidth)
12 degrees
55 degrees
13 degrees
H-Plane (3 dB beamwidth)
Omnidirectional
80 degrees
120 degrees
Polarization
Linear (vertical)
Linear (vertical)
Linear (vertical)
Impedance (Ohms)
50
50
50
Weight
0.5 lb. (0.23 kg)
0.6 lb. (0.27 kg)
1.5 lb. (0.68 kg)
Mounting style
Mast
Flush wall mount, articulating wall, or mast
Flush wall mount, articulating wall, or mast
Front-to-back ratio (dB)
n/a
15
18
Dimensions
n/a
6.7 x 4.75 x 0.84 in. (17.0 x 12.1 x 2.1 cm)
3.2 x 23.2 x 2.1 in. (8.1 x 59.0 x 5.3 cm)
Height
25.25 in. (64.1 cm)
n/a
n/a
Wind surface area
0.11 ft2 (0.01 m2)
n/a
0.55 ft2 (0.05 m2)
Wind survival
125 mph (200 km/hr)
n/a
125 mph (200 km/hr)
Enclosure
Polycarbonate
ASA
Acrylic / PVC
Grounding
n/a
DC
n/a
RF connector
Reverse SMA (male)
Reverse SMA (male)
Reverse SMA (male)
Cable length
33“
33“
33“
Storage temperature
–40 to 149°F (–40 to +65°C)
–40 to 149°F (–40 to +65°C)
–40 to 149°F (–40 to +65°C)
Operating temperature
–22 to 131°F (–30 to +55°C)
–22 to 131°F (–30 to +55°C)
–22 to 131°F (–30 to +55°C)
Certified for use on the following
HP ProCurve wireless access points
Wireless Access Point 420
Wireless Access Point 520wl
Wireless Access Point 420
Wireless Access Point 420
Wireless Access Point 520wl
Regulatory restrictions
Not approved for use in North America
None
Not approved for use in North America
83
HP ProCurve External Access Point Antennas
Specifications
HP ProCurve MC-Card to
R-SMA cable (J8447A)
HP ProCurve 14 dBi yagi
antenna (J8448A)
Frequency (MHz)
2400–2500
2400–2500
Gain dBi (with antenna cable)
.4 (loss)
14
VSWR max
1:3:1
1:5:1
E-Plane (3 dB beamwidth)
n/a
30 degrees
H-Plane (3 dB beamwidth)
n/a
34 degrees
Polarization
n/a
Linear
Impedance (Ohms)
50
50
Weight
n/a
1.25 lb. (0.56 kg)
Mounting style
n/a
Articulating wall or mast mount
Front-to-back ratio (dB)
n/a
18
Dimensions
n/a
26.5 x 3.75 x 1.5 in. (67.3 x 9.5 x 3.8 cm)
Height
n/a
n/a
Wind surface area
n/a
0.70 ft2 (0.07 m2)
Wind survival
n/a
100 mph (160 km/hr)
Enclosure
n/a
Polycarbonate
Grounding
n/a
n/a
RF connector
Reverse SMA (female) to R/A MC-Card
N-Type (female)
Cable length
12”
20”; 12“ cable with N-Type (male) to MC-Card
Storage temperature
n/a
–40 to 149°F (–40 to +65°C)
Operating temperature
n/a
–22 to 131°F (–30 to +55°C)
Certified for use on the following
HP ProCurve wireless access points
Wireless Access Point 520wl
Wireless Access Point 520wl
Regulatory restrictions
None
Not approved for use in North America
84
HP ProCurve Access Control Client Software
HP ProCurve Access Control Client Software 25 (J8449A)
HP ProCurve Access Control Client Software 500 (J8469A)
HP ProCurve Access Control Client Software 5000 (J8470A)
HP ProCurve Access Control Client Software 25000 (J8468A)
Access Control clients are a critical element of the
HP ProCurve Access Control Security solution. They provide
a comprehensive solution to the network access control
problem in a multi-platfrom environment. The Access
Control Security solution provides wide support to most
customer authentication needs with support for operating
environments including Microsoft Windows 98, Windows
2000, and Windows XP; Red Hat Linux; and Apple Mac OS.
In addition, the back-end interoperability with leading RADIUS
authentication vendors completes an industry-leading Access
Control Security solution.
85
HP ProCurve Access Control Client Software
Features and benefits
• Ease of deployment: Single source for all elements of the
access control Access Control Security solution, with
multiplatfrom support for 802.1X supplicants and an
auto install utility to simplify deployment
Services
• Check www.hp.com/go/procurveservices for part
numbers and service-level descriptions.
Specifications
Operating systems
MS Windows NT
MS Windows 2000
MS Windows XP Professional
MS Windows XP
MS Windows 2003
MS Windows 98
Apple Mac OS 10.2
Red Hat Linux 9.x
86
• Single source for all elements: Supplicants for multiple
operating systems, wide switch support from stackables
to chassis, and interoperability with multivendor backend RADIUS authentication server
HP ProCurve Manager and HP ProCurve Manager Plus
HP ProCurve Manager
HP ProCurve Manager Plus (J8172A)
HP ProCurve Manager is a Windows®-based network management solution
that is included in-box with all manageable HP ProCurve devices. It provides
all the basic tools you need to handle a network effectively, along with
a 30-day trial version of HP ProCurve Manager Plus. HP ProCurve Manager
Plus is a complete, Windows-based network management solution that
provides both basic and advanced management features for the most
demanding enterprise networks. HP ProCurve Manager Plus gives you
network control and advanced device-handling capabilities that allow you to
demand more—more accountability, more agility, and a better return on IT.
Features and benefits of HP ProCurve Manager
• Network status summary: Upon boot-up, a Network
Status screen displays high-level information on network
devices, end nodes, events, and traffic levels. From here,
the user can research any one of these areas to get
more details.
• Alerts and troubleshooting: An Events Summary screen
displays alerts to the user and categorizes them by
severity, making it easier to track where bottlenecks
and issues exist in the network. Alerts present detailed
information on the problem, even down to the
specific port. Users can be alerted to network issues
via e-mail or pager.
• Automatic device discovery: Customized for fast
discovery of all HP ProCurve manageable network
devices. The user can define which IP subnets
to discover.
• Topology and mapping: Automatically creates a map of
discovered network devices. Maps are color-coded to
reflect device status and can be viewed at multiple levels
(physical view, subnet view, or VLAN view).
• Device management: Many device-focused tasks can
be performed directly by the software, or the user can
access Web and command-line interfaces with the click
of a button to manage individual devices from inside
the tool.
87
HP ProCurve Manager and HP ProCurve Manager Plus
Features and benefits of HP ProCurve Manager Plus
•All of the features of HP ProCurve Manager, along with:
• In-depth traffic analysis: An integrated, low-overhead
traffic monitor interface shows detailed information on
traffic throughout the network. Using enhanced traffic
analysis protocols such as Extended RMON and sFlow,
the user can monitor overall traffic levels, segments
with the highest traffic, or even the top users within
a network segment.
• Group and policy management: The user can create
device groups and set group policies for managing
those devices. Predetermined configurations can be
automatically applied to new devices that have just
been added to the network.
• Easier configuration management: Changes in
configuration are tracked and logged, and archived
configurations can be applied to one or many devices.
Configurations can be compared over time or between
two devices, with the differences highlighted for the user.
• Advanced VLAN management: A new, easy-to-use
VLAN management interface allows the user to create
and assign VLANs across the entire network, without
having to access each network device individually.
Specifications
Minimum processor
500 MHz Intel Pentium III or equivalent
Recommended processor
800 MHz Intel Pentium III or equivalent
Minimum memory
256 MB RAM
Recommended memory
512 MB RAM
Disk space
100 MB free hard disk space
Operating system
MS Windows 2000; MS Windows XP; MS Windows 2003
Additional requirements
Additional processing power may be necessary for extensive traffic monitoring
88
• Device software updates: Automatically obtains new
device software images from HP and updates devices,
allowing the user to download the latest version or
choose the desired version. Updates can be scheduled
easily across large groups of devices, all at userspecified times.
• Investment protection: The modular software architecture
of HP ProCurve Manager Plus will allow HP to offer
network administrators add-on software solutions that
complement their needs.
Feature
HP ProCurve
HP ProCurve Manager
Manager
Plus
Device auto-discovery
•
Topology and mapping
•
•
Intuitive Explorer-style interface
•
•
Usable troubleshooting data and alerts
•
•
Device configuration and management
•
•
•
Customize and execute policies across groups
•
Enhanced network security features
•
Multiple device configuration management
and archiving
•
Create and configure VLANs across
the network
•
Traffic monitoring and analysis
•
Software updates with dual flash image support
•
Modular design for add-in expansion
•
HP ProCurve Network Management for OV-NT
HP ProCurve Network Managment for OV-NT (J4869B)
For enterprise networks, HP ProCurve offers a network management solution
for NT environments that integrates directly into the HP OpenView enterprise
management platform, allowing you to manage larger networks. Using
this powerful tool, you can monitor traffic, schedule software updates,
and execute device management, configuration, and policy settings for
HP ProCurve devices from a single management station. This centralized
approach simplifies the management of all the key segments of your
network infrastructure.
HP ProCurve Network Management for OV-NT was specifically developed
to integrate with HP OpenView Network Node Manager (NNM) on
Windows® (NT, 2000) to provide a proven, single-source solution for all
your network monitoring and management requirements. HP ProCurve
Network Management for OV-NT is a reliable, scalable, and easy-to-use
software solution that simplifies management of HP ProCurve networks.
89
HP ProCurve Network Management for OV-NT
Total network management solution
Features and benefits
This HP software enables you to centrally manage your
layer 2 and routed layer 3 enterprise LAN environments
from a single platform running Windows NT or 2000:
This software solution incorporates Proactive Management
to reduce time and money spent on managing the
network:
• Offers full native integration with the HP OpenView
Network Node Manager (NNM), so you can manage
your whole network from a single management console
• Allows the user to set SNMP parameters on the device
to create Trap Receivers and RMON thresholds to
monitor traffic
• Automatically update the software on your HP ProCurve
networking devices, and copy the configuration on the
devices to your network management station according
to the schedule that you determine
• The Traffic Monitor lets you examine network traffic and
proactively identify problem areas based on statistics
gathered from any HP ProCurve device that is SNMP
manageable
• Includes an intuitive set of applications that provide
robust capabilities for managing your HP ProCurve
network devices
• Using this plug-in, HP ProCurve Networking devices are
capable of sending special traps as part of their FindFix-and-Inform technology—which provides the user with
troubleshooting tips to help fix issues the device may be
experiencing
• Displays traffic monitor data for all configured segments
for the most recent 60 minutes at 1-minute intervals—
also highlights the top users on each segment
• Enables you to easily configure SNMP parameters—
community names, authorized managers, etc.—as well
as RMON thresholds
• Manages an unlimited number of nodes from one easy
interface
• Supports group configuration and configuration
policies, which allows you to define groups of HP
networking devices and then apply configuration
policies to all the devices in a group at the same time
• Quick and uncomplicated generation of NNM maps
with custom icons of HP networking devices—enabling
you to easily visualize the products you are managing
• Using this plug-in, you can easily format alarms
(SNMP traps) and install and compile MIBs for
HP ProCurve devices
90
Supported devices
• HP ProCurve switches: 9300m series, 6308m, 6208m,
6108, 5300xl series, 4100gl series, 8000m, 4000m,
2650, 2524, 2512, 2424m, 1600m
• HP ProCurve hubs: 10/100 Hub 24m, 10/100 Hub
12m, 10Base-T Hub 24m, 10Base-T Hub 12m
• Other HP switches: Switch 2000, Switch 2000B,
Switch 800T
HP Hub and Switch Management for OV-UX
HP Hub and Switch Management for OV-UX (J3250P)
For enterprise networks, HP ProCurve offers a network management solution
for UNIX environments that integrates directly into the HP OpenView
enterprise management platform, allowing you to manage larger networks.
This streamlined management solution helps you to proactively manage your
network—in its current state or as it continues to expand with your growing
business. Using this powerful tool, you can do things like run reports and
manage devices for HP ProCurve switches from a single management
station. This centralized approach simplifies the management of all the key
segments of your network infrastructure.
HP Hub and Switch Management for OV-UX was specifically developed to
integrate with HP OpenView Network Node Manager (NNM) on UNIX® to
provide a proven, single-source solution for all your network monitoring and
management requirements. HP ProCurve Network Management for OV-UX
is a reliable, scalable, and easy-to-use software solution that simplifies
management of HP ProCurve networks.
91
HP Hub and Switch Management for OV-UX
Total network management solution
Features and benefits
This HP software enables you to centrally manage your
layer 2 and routed layer 3 enterprise LAN environments
from a single platform running UNIX:
This software solution incorporates Proactive Management
to reduce time and money spent on managing the
network:
• Offers full native integration with the HP OpenView
Network Node Manager (NNM), so you can manage
your whole network from a single management console
• Allows the user to set SNMP parameters on the device
to create Trap Receivers and RMON thresholds to
monitor traffic
• Provides the ability to manage multivendor networks
leveraging HP OpenView capabilities
• Provides reports to help proactively plan for growth
via NNM
• Includes an intuitive set of applications that provide
robust capabilities for managing your HP ProCurve
network devices
• Using this plug-in, HP ProCurve Networking devices are
capable of sending special traps as part of their FindFix-and-Inform technology—which provides the user with
troubleshooting tips to help fix issues the device may be
experiencing
• Capable of mapping large enterprise network
configurations
• Enables you to easily configure SNMP parameters—
community names, authorized managers, etc.—as well
as RMON thresholds
• Manages an unlimited number of nodes from one easy
interface
• HP ProCurve Network Management applications can be
accessed directly from the NNM menus
• Quick and uncomplicated generation of NNM maps
with custom icons of HP networking devices—enabling
you to easily visualize the products you are managing
• Easily set NNM capabilities, format alarms (SNMP
traps), and install and compile MIBs for HP ProCurve
devices
• With the use of this plug-in, incoming traps are decoded
and include clear descriptions in the HP OpenView
event log
92
Supported devices
• HP ProCurve switches: 9300m series, 6308m, 6208m,
6108, 5300xl series, 4100gl series, 8000m, 4000m,
2650, 2626, 2524, 2512, 2424m, 1600m
• HP ProCurve hubs: 10/100 Hub 24m, 10/100 Hub
12m, 10Base-T Hub 24m, 10Base-T Hub 12m
• Other HP switches: Switch 2000, Switch 2000B,
Switch 800T
The HP commitment to quality and reliability goes
beyond hardware and software solutions to ensure
that your network performs smoothly over time.
Included with the purchase of HP ProCurve products,
you receive an extensive set of support services
designed to keep your business, and network, running
smoothly. Additional services—ranging from planning
to implementation, operation, and maintenance—can
be added, customized, and used throughout your
network’s lifecycle.
Service and support solutions
Designed into HP ProCurve products
Free electronic support via the Web
You receive HP’s legendary commitment to quality and
reliability with HP ProCurve products. Coupled with
intuitive design and ease of use, the following features
can be found throughout the HP ProCurve product line:
Comprehensive documentation such as product
information, technical papers, release notes, and FAQs
can be found on the HP ProCurve Networking Web site
(www.hp.com/go/hpprocurve). This information is
updated frequently and is available on demand, every
day, at any time.
• Free HP ProCurve Manager software shipped with
every managed product
• LED displays for at-a-glance monitoring and
troubleshooting
HP ProCurve customers also receive the following:
• Extensive installation information shipped with the
product to get you up and running quickly
• Proactive notification of new software releases via e-mail
Free network design service
Our comprehensive network design services will generate
drawings, including detailed explanations, as well
as recommendations based upon your business
or project requirements. These designs can address
current and future traffic levels, security needs, budget
constraints, and the ability to interface with legacy
equipment.
• Free software updates
• Free technical product support via e-mail
Worldwide telephone assistance
Free telephone support by highly trained service
technicians at our HP Customer Care Centers worldwide
is available during normal business hours to assist with
HP ProCurve product questions.
93
Service and support solutions
Industry-leading warranty
Fee-based services
HP ProCurve products come with warranties you would
expect from HP.
Depending on your needs, HP provides a broad range
of onsite and offsite services with HP ProCurve products,
such as:
• Free lifetime warranty* for as long as you own the
product with next-business-day advance replacement
(available in most countries)
• Warranty covers the entire product, including fans,
power supplies, and accessories
• Genuine HP parts for both in- and out-of-warranty
repair needs
* The HP ProCurve Routing Switch 9300m series and HP ProCurve Secure
Access 700wl series have a 1-year warranty with extensions available.
•Hardware support
– 4-hour onsite
– 4-hour onsite 24 x 7
– 6-hour call to repair
•Software support
– 24 x 7 phone-in
•Premium (hardware and software)
– Support Plus 24
– Proactive 24
•Deployment services
– Installation
– Installation and startup
For more information on HP ProCurve Services, visit
www.hp.com/go/procurveservices.
94
Contact information
Europe
Austria: +43 (0810) 006080
Belgium: +32 (2) 778 3111
Bulgaria: +359 (2) 943 4889
Czech Republic: +420 (02) 6130 7111
Denmark: +45 99 11 25
Dubai (Gulf): +971 (4) 81 5456
East Central Europe (Vienna): +43 125 0000
Finland: +358 (09) 88 721
France: +33 (1) 69 82 6060
Germany: +49 (0180) 525 2633
Greece: +30 (01) 689 64 11
Hungary: +36 (1) 382 6666
HP European HQ (Geneva): +41 (22) 780 8111
Iceland: +354 570 1000
Ireland: +353 (01) 28 44 633
Israel: +972 (9) 9524848
Italy HQ: +39 (02) 921 21
Italy Pre-Sales: +39 (02) 921 22770
Luxembourg: +352 (32) 02 778 3111
Middle East & Africa: +41 (22) 780 8111
Netherlands: +31 (020) 547 6666
Norway: +47 (22) 73 59 60
Poland: +48 (22) 565 77 00
Portugal: +351 (0808) 206 001
Romania: +40 (1) 250 6197
Russia: +7 (095) 797 3500
Slovakia: +421 (7) 822 026
South Africa: +27 (11) 785 1000
Spain: +34 (91) 631 1600
Spain Customer Info: +34 (902) 150 151
Sweden: +46 (08) 449 8815
Switzerland: +41 (0848) 88 44 66
Turkey: +90 (212) 2245 925
UK: +44 (0870) 240 2479
Ukraine: +380 (810) 38044 4906120
Asia Pacific
Australia: +61 3 8877 8000
Hong Kong: +800 96 7729
India: +91 (11) 682 6035
Indonesia: +62 (21) 350 3408
Japan (Tokyo): +81 (3) 5304 6660
Korea: +82 (2) 3270 0700
Malaysia: +60 (3) 295 2566
New Zealand: +64 (9) 356 6640
Philippines: +63 (2) 867 3551
PRC: +86 (0) 10 6564 5959
Singapore: +65 272 5300
Taiwan: +886 (2) 2717 0055
Thailand: +66 (2) 661 4000
Vietnam: +84 (0) 823 4530
Latin America
Argentina: +54 0-800-888-10-30
Brazil: +55 0-800-15-77-51
Chile: +56 123-800-360-999
Colombia: +57 980-915-12-98
México: +52 01-800-900-72-00
01-800-472-66-84
Perú: +51 0-800-50-500
Puerto Rico: 1-877-207-0934
Venezuela: +58 0-800-47-888
North America
Canada: (800) 387-3867
United States: (970) 635-1000
95
To learn more, visit www.hp.com/go/hpprocurve.
© 2003, 2004 Hewlett-Packard Development Company, L.P. The information contained herein is subject to
change without notice. The only warranties for HP products and services are set forth in the express warranty
statements accompanying such products and services. Nothing herein should be construed as constituting an
additional warranty. HP shall not be liable for technical or editorial errors or omissions contained herein.
ARM is a registered trademark of ARM Limited. Intel and Pentium are U.S. registered trademarks of Intel
Corporation. Microsoft, Windows, and Windows NT are U.S. registered trademarks of Microsoft Corporation.
UNIX is a registered trademark of The Open Group.
Some product specifications are subject to change. For up-to-date information please visit
www.hp.com/go/hpprocurve.
5982-4071EN, 05/2004