OWNER’S MANUAL
T4 Treadmill Trainer
Please carefully read this entire manual
before operating your new treadmill.
Before returning your fuel product to any retailer, or if you require any
assistance with assembly or technical support please call us first for
assistance at 866-697-6531. Thank you for your fuel purchase.
TABLE OF CONTENTS
Product Registration
1
Important Safety Instructions
2
Important Electrical Information
3
Important Operation Instructions
4
Assembly instructions
8
Folding Instructions
12
Transport Instructions
12
Operation of Your New Treadmill
13
Programmable Features
19
General Maintenance
26
Service Checklist - Diagnosis Guide
29
Manufacturer’s Limited Warranty
31
ATTENTION
THIS TREADMILL IS INTENDED FOR RESIDENTIAL USE ONLY AND IS WARRANTED FOR THIS
APPLICATION. ANY OTHER APPLICATION VOIDS THIS WARRANTY IN ITS ENTIRETY.
Before returning your Fuel product to any retailer, or if you require any
assistance with assembly or technical support please call us first for
assistance at 866-697-6531. Thank you for your Fuel purchase.
T4-2017-Ver.A
Congratulations On Your New Treadmill and Welcome to the FUEL Fitness Family!
Thank you for your purchase of this quality treadmill from FUEL Fitness. Your new
treadmill has been manufactured by one of the leading fitness manufacturers in the world. FUEL Fitness will do all we can to make your ownership experience as pleasant as
possible for many years to come. If you have questions, or if parts are missing or damaged, or you
require customer service, call 1-866-697-6531. Please have your model number and
serial number handy when you call.
Please take a moment to record where you purchased your machine, as well as the date of purchase
for future reference. We appreciate your confidence in FUEL Fitness and we will always remember
that you are the reason that we are in business. Please complete and mail your registration card
today and enjoy your new treadmill.
Yours in Health,
FUEL Fitness
Purchase Location
Purchase Date
PRODUCT REGISTRATION
RECORD YOUR SERIAL NUMBER Please record the
Serial Number of this fitness product in the space
provided below.
Serial Number
REGISTER YOUR PURCHASE
The self-addressed product registration card must be completed in full and returned to Fuel .
You can also go to www.fuelfitnessusa.com under the support tab to register online.
T4_20170210
1
T4 TREADMILL
IMPORTANT SAFETY INSTRUCTIONS
WARNING - Read all instructions before using this appliance.
DANGER - To reduce the risk of electric shock disconnect your FUEL treadmill from the electrical
outlet prior to cleaning and/or service work.
WARNING - To reduce the risk of burns, fire, electric shock, or injury to persons, install the
treadmill on a flat level surface with access to a 110-volt, 15-amp grounded outlet with only the
treadmill plugged into the circuit.
DO NOT USE AN EXTENSION CORD UNLESS IT IS A 14AWG OR BETTER, WITH ONLY ONE
OUTLET ON THE END: DO NOT ATTEMPT TO DISABLE THE GROUNDED PLUG BY USING
IMPROPER ADAPTERS, OR IN ANY WAY MODIFY THE CORD SET.
A serious shock or fire hazard may result along with computer malfunctions. See Grounding Instructions, page 3.
Do not operate treadmill on deeply padded, plush or shag carpet. Damage to both
carpet and treadmill may result.
Do not block the rear of the treadmill. Provide a minimum of 3 1/2 feet clearance
between the rear of the treadmill and any fixed object.
Keep children under the age of 13 away from this machine. There are obvious pinch
points and other caution areas that can cause harm.
Keep hands away from all moving parts.
Never operate the treadmill if it has a damaged cord or plug. If the treadmill is not
working properly, call your dealer.
Keep the cord away from heated surfaces.
Do not operate where aerosol spray products are being used or where oxygen is being
administered. Sparks from the motor may ignite a highly gaseous environment.
Never drop or insert any object into any openings.
Do not use outdoors.
To disconnect, turn all controls to the off position, remove tether cord, then remove the
plug from the outlet.
Do not attempt to use your treadmill for any purpose other than for the purpose it is
intended.
The pulse sensors are not medical devices. Various factors, including the user’s
movement, may affect the accuracy of heart rate readings. The pulse sensors are
intended only as exercise aids in determining heart rate trends in general.
Use handrails provided; they are for your safety.
Wear proper shoes. High heels, dress shoes, sandals or bare feet are not suitable for use
on your treadmill. Quality athletic shoes are recommended to avoid leg fatigue.
This appliance is not intended for use by persons with reduced physical, sensory or
mental capabilities, or lack of experience and knowledge, unless they have been given
supervision or instruction concerning use of the appliance by a person responsible for
their safety.
Remove tether cord after use to prevent unauthorized treadmill operation.
SAVE THESE INSTRUCTIONS - THINK SAFETY!
T4 TREADMILL
2
IMPORTANT ELECTRICAL INSTRUCTIONS
WARNING!
NEVER use a ground fault circuit interrupt (GFCI) wall outlet with this treadmill. As with any
appliance with a large motor, the GFCI will trip often. Route the power cord away from any
moving part of the treadmill including the elevation mechanism and transport wheels.
NEVER remove any cover without first disconnecting AC power.
If voltage varies by ten percent (10%) or more, the performance of your treadmill may be
affected. Such conditions are not covered under your warranty. If you suspect the voltage is
low, contact your local power company or a licensed electrician for proper testing.
NEVER expose this treadmill to rain or moisture. This product is NOT designed for use outdoors,
near a pool or spa, or in any other high humidity environment. The maximum operating
temperature specification is 40 degrees c, and humidity is 95% non-condensing (no water drops
forming on surfaces).
Circuit Breakers: Some circuit breakers used in homes are not rated for high inrush currents(ARC
fault breakers are one example) that can occur when a treadmill is first turned on or even during
use. If your treadmill is tripping the house circuit breaker (even though it is the proper current
rating) but the circuit breaker on the treadmill itself does not trip, you will need to replace the
home breaker with a high inrush type. This is not a warranty defect. This is a condition we as a
manufacture have no ability to control. This part is available through most electrical supply stores.
Examples:
Grainger part # 1D237, or available online at www.squared.com part # QO120HM.
GROUNDING INSTRUCTIONS
This product must be grounded. If the treadmill should malfunction or breakdown, grounding
provides a path of least resistance for electric current, reducing the risk of electric shock. This
product is equipped with a cord having an equipment-grounding plug. The plug must be
plugged into an appropriate outlet that is properly installed and grounded in accordance with all
local codes and ordinances.
DANGER - Improper connection of the equipment-grounding conductor can result in a risk
of electric shock. Check with a qualified electrician or serviceman if you are in doubt as to
whether the product is properly grounded. Do not modify the plug provided with the
product if it will not fit the outlet; have a proper outlet installed by a qualified electrician.
This product is for use on a nominal 110-volt circuit, and has a grounding plug that looks like
the plug illustrated below. A temporary adapter that looks like the adapter illustrated below
may be used to connect this plug to a 2-pole receptacle as shown below if a properly grounded
outlet is not available. The temporary adapter should be used only until a properly grounded
outlet, (shown below) can be installed by a qualified electrician. The green colored rigid earlug, or the like, extending
from the adapter, must be
connected to a permanent
ground such as a properly
grounded outlet box cover.
Whenever the adapter is
used, it must be held in
place by a metal screw.
3
T4 TREADMILL
IMPORTANT OPERATION INSTRUCTIONS
NEVER operate this treadmill without reading and completely understanding the results of
any operational change you request from the computer.
Understand that changes in speed and incline do not occur immediately. Set your desired
speed on the computer conFuel and release the adjustment key. The computer will obey
the command gradually.
NEVER use your treadmill during an electrical storm. Surges may occur in your household
power supply that could damage treadmill components. Unplug the treadmill during an
electrical storm as a precaution.
Use caution while participating in other activities while walking on your treadmill; such as
watching television, reading, etc. These distractions may cause you to lose balance or stray
from walking in the center of the belt; which may result in serious injury.
NEVER mount or dismount the treadmill while the belt is moving. FUEL treadmills start at a
very low speed and it is unnecessary to straddle the belt during start up. Simply standing on
the belt during slow acceleration is proper after you have learned to operate the unit.
Always hold on to a handrail or hand bar while making control changes (incline, speed, etc.).
Do not use excessive pressure on console control keys. They are precision set to function
properly with little finger pressure. Pushing harder is not going to make the unit go faster or
slower. If you feel the buttons are not functioning properly with normal pressure contact
your FUEL dealer.
IMPORTANT SAFETY INSTRUCTIONS
A safety tether cord is provided with this unit and should be used at all times. It is for your safety
should you fall or move too far back on the tread-belt. Pulling this safety tether cord will stop
tread-belt movement.
To Use:
1. Place the safety key into position on the console control head. Your treadmill will not start
and operate without this. Removing the safety key also secures the treadmill from unauthorized use.
2. Fasten the plastic clip onto your clothing securely to assure good holding power.
Note: The clip should be attached securely to make certain it does not come off. Be familiar
with its function and limitations. The treadmill will stop, depending on speed, with a one to two
step coast anytime the safety key is pulled off the console. Use the red Stop switch in normal
operation.
T4 TREADMILL
4
IMPORTANT SAFETY INSTRUCTIONS
READ BEFORE UNPACKING YOUR FOLDING TREADMILL
Serious injury could occur if this folding treadmill is not unpacked properly.
There is a Velcro strap installed around the treadmill base that prevents the treadmill from
unfolding accidentally during shipping. If this strap is not removed properly the treadmill could
spring open unexpectedly and cause injury if someone is standing near the treadmill when the
strap is removed.
To ensure your personal safety during removal of the shipping strap please make sure the
treadmill is positioned flat on the ground, in the orientation it would be in if you were using the
treadmill. Do not turn the treadmill up on its side while removing the shipping strap. This could
cause the treadmill’s folding mechanism to spring open. If the end of the Velcro strap (that you
need to grab to remove it) happens to be under the treadmill deck, reach under the deck to
grab it, but do not tilt the treadmill up to gain access to the strap end.
PREVENTATIVE MAINTENANCE CHART
Vacuum Under
Motor Cover &
Check Wiring
(Every Other
Month)
Clean & Inspect Deck
for Lubrication
(Every Other Month)
Lubricate Deck
(Every 90 hours or
sooner if dry)
5
Inspect Belt Tracking
(Monthly) Adjust if
necessary
Date
T4 TREADMILL
ASSEMBLY PACK CHECKLIST
2
HARDWARE STEP 2
#128. M5
Speed Nut Clip (6 pcs)
3
HARDWARE STEP 3
#130. 5/16” x 1/2”
Button Head Socket Bolt (8 pcs)
5
HARDWARE STEP 5
#113. Ø 10 x 2T
Split Washer (4 pcs)
6
#133. 3/8” x 1-3/4”
Button Head Socket Bolt (4 pcs)
HARDWARE STEP 6
#168. 3.5 x 16mm
Sheet Metal Screws (6 pcs)
T4 TREADMILL
6
7
HARDWARE STEP 7
#151. 5/16” x 3/4”
Button Head Socket Bolt (4 pcs)
8
#75. Safety Key
HARDWARE STEP 8
#120. 5 x 16mm
Tapping Screw (6 pcs)
ASSEMBLY TOOLS
#131. Combination M5 Allen Wrench
& Phillips Head Screw Driver
#132. M6 L Allen Wrench
7
T4 TREADMILL
ASSEMBLY INSTRUCTIONS
1
ASSEMBLY STEP 1
1.
2
Remove the treadmill from the carton and position it aside on a smooth, level
floor. The rear should be at least 3’ from any wall. Do not remove the Velcro
belt until you have removed the plastic wrap and Styrofoam from beneath
the unit. Turning the unit on its side after removing the belt may cause
the unit fold up and cause serious injury!
ASSEMBLY STEP 2
HARDWARE STEP 2
#128. M5 Speed Nut
Clip (6 pcs)
1. Install the six Speed Nut Clips (128) on the Frame Base left and right side.
2. Slide the lower handlebar covers (142L & 144R) onto the console masts
(notice orientation).
3. Slide the Frame Base Caps (62L & 63R) over the Upright tubes (4 & 5).
Connect the Lower Computer Cable (49) to the Middle Computer Cable (50)
on the right side of the unit.
Before attaching the hardware to Step 3, make sure the cables you just connected don’t
get pinched in between the steel tubing. If they do, this may cause issues that prevent
the treadmill from operating properly.
T4 TREADMILL
8
3
ASSEMBLY STEP 3
#130. 5/16” x 1/2” Button
Head Socket Bolts (8 pcs)
1.
4
HARDWARE STEP 3
Attach the Upright Tubes (4 & 5) onto the Frame Base (2) with eight Button
Head Socket Bolts (130) by using the Combination M5 Allen Wrench &
Phillips Head Screw Driver (131). Do not tighten the bolts completely
until Step 7 is finished.
ASSEMBLY STEP 4
To complete this step, it is recommended that you find something to rest the
console on at the appropriate height or have someone hold the console while
you connect the cables
1. Connect the Speed Adjustment Switch Cable (54) to the Speed Cable, Upper
(37). Connect the Incline Adjustment Switch Cable (55) to the Incline Cable,
Upper (38). Connect the Computer Cable, Middle (50) and Computer Cable,
Upper (48). Tuck the excess cable into the hand rail tubing to prevent it from
getting pinched.
Before attaching the hardware to Step 5, make sure the cables you just connected don’t
get pinched in between the steel tubing. If they do, this may cause issues that prevent
the treadmill from operating properly.
9
T4 TREADMILL
5
ASSEMBLY STEP 5
1.
HARDWARE STEP 5
”
#139. 3/8 x 1-3/4 Button
Head Socket Bolts (4 pcs)
#113. O10 x 1.5T Split
Washers (4 pcs)
52
Insert the Console Assembly (
) into the Upright Tubes (
139
132
attach with four Button Head Socket Bolts (
113
(
6
). Tighten using the M6 L Allen Wrench (
4 5
&
) and
) and four Split Washers
).
ASSEMBLY STEP 6
1.
HARDWARE STEP 6
#175. 3.5 x 16mm
Sheet Metal
Screws (6 pcs)
141 142
Attach the Left (
&
143 144
) and Right (
&
) Upper and Lower
Handlebar Covers to the top of the Upright Tubes (
Metal Screws (
175
&
) with six Sheet
). Tighten with the Combination M5 Allen Wrench &
131
Phillips Head Screw Driver (
T4 TREADMILL
4 5
).
10
7
ASSEMBLY STEP 7
HARDWARE STEP 7
#159. 5/16” x 3/4”
Button Head Socket
Bolts (4 pcs)
#75. Safety Key
1.
26
159
158
Attach the Support tube (
) between the upright tubes (
Button Head Socket Bolts (
2.
Place the Beverage Holder (
). Tighten bolts firmly.
4 5
&
) with four
26
) on top of the Support tube (
) as shown
in the illustration.
3. Place the magnet of the safety key (75) in between the Start and Stop
buttons (if it isn’t already attached). The treadmill will not function without
this in place.
4. Check to make sure all bolts and screws are completely tightened.
8
ASSEMBLY STEP 8
HARDWARE STEP 8
#120. 5 x 16mm
Tapping Screws (6 pcs)
1.
Finish tightening the button head bolts (from Step 2 above) that secure the
console masts to the frame.
2.
62 63
Attach the Console mast covers (
120
Tapping Screws (
&
2
) to the Frame Base (
) with six
). Tighten screws using the Combination M5 Allen
Wrench & Phillips Head Screw Driver (
131
).
11
T4 TREADMILL
FOLDING INSTRUCTIONS
Do not attempt to move the unit unless it is in the folded and locked position. Be sure the
power cord is secured to avoid possible damage. Use both handrails to maneuver the unit to
the desired position.
TO FOLD THE TREADMILL
Make certain the treadmill is at minimum
incline. Lift the treadmill running deck
until it is secured by the locking telescoping
tube assembly in center back of base.
TO UNFOLD THE TREADMILL
Apply slight forward pressure* on the treadmill
running deck with one hand. Pull down on the
unlocking lever and slowly lower the running deck
to the floor. The deck will lower
unassisted when it reaches about waist high.
*At the rear roller area to relieve pressure on
the locking system.
TRANSPORTATION INSTRUCTIONS
The treadmill is equipped with transport wheels that are engaged when the treadmill is folded.
After folding simply roll the treadmill away.
T4 TREADMILL
12
OPERATION OF YOUR TREADMILL
GETTING FAMILIAR WITH THE CONTROL PANEL
T4 CONSOLE
COOLING FANS
SPEED QUICK KEYS
INCLINE QUICK KEYS
SPEAKER
SPEAKER
FAN POWER SWITCH
DOT MATRIX DISPLAY
DISPLAY BUTTON
CONTROL KEYS
AUDIO IN JACK
(MP3, CD, OR
SMARTPHONE)
HEADPHONE JACK
CONTACT HEART
RATE SENSORS
GETTING STARTED
T4 CONSOLES
Power the treadmill on by plugging it into an appropriate wall outlet, then turn on the power
switch located at the front of the treadmill below the motor hood. Ensure that the Safety Key is
installed, as the treadmill will not power on without it (see assembly step 7 for reference).
When the power is turned on, a message will scroll across the Message Window showing the current
software version. Then the Time and Distance Windows will display Odometer read- ings for a short
time, Time Window will show how many hours the treadmill has been in use and the Distance
Window will show how many miles (or Kilometers if the treadmill is set to metric readings) the
treadmill has gone. The treadmill will then enter idle mode, which is the starting point for operation.
13
T4 TREADMILL
QUICK-START OPERATION
1. Attach the Safety Key to wake display up (if not already on).
2. Press the Start key to begin belt movement then adjust to the desired speed using the
Speed ▲/▼ keys (console or handgrip). You may also use the Quick speed keys 2, 3, 4, 5, 6,
9 or 12 to adjust the speed.
3. To slow tread-belt press and hold the Speed ▼ key (console or handgrip) to the desired
speed. You may also press the Quick speed adjust keys, 2 through 12.
4. To stop the tread-belt press Stop key or pull away Safety Key.
PAUSE/STOP/RESET FEATURE
1. When the treadmill is running the pause feature may be utilized by pressing the red Stop
key once. This will slowly decelerate the tread-belt to a stop. The incline will go to zero
percent. The Time, Distance and Calorie readings will hold while the unit is in the pause
mode. After 5 minutes the display will reset and return to the start up screen.
2. To resume your exercise, when in Pause mode, press the Start key. The speed and incline will
return to their previous settings.
Pause is executed when the Stop button is pressed once. If the Stop button is pressed a
second time, the program will end and a workout summary will be displayed. If the
Stop button is pressed a third time, the console will return to the idle mode (start up)
screen. If the Stop button is held down for more than 3 seconds the console will reset.
INCLINE FEATURE
Incline may be adjusted anytime after belt movement.
Press and hold the Incline ▲/▼ keys (console or handgrip) to achieve desired level of
effort. You may also choose a more rapid increase / decrease by selecting desired key, 1, 3, 6,
9, 12, 14 and 15, on left hand side of console (incline).
The Incline Window display will indicate incline position as adjustments are made.
T4 TREADMILL
14
DOT MATRIX CENTER DISPLAY
Twenty columns of dots (8 high) indicate each segment of a
workout for the T4. The dots are only to show an
approximate level (speed/incline) of effort. They do not
necessarily indicate a specific value - only an approximate
percent to compare levels of intensity. In operation, the
speed/incline dot matrix window will build a profile
“picture” as values are changed during a workout. When
the word “Speed” is lit above the dot matrix it indicates
that the Speed profile is being displayed and when
the word “Incline” is lit above the dot matrix it indicates
the Incline profile is being displayed.
You may change the Dot Matrix profile view between
Speed and Incline by pressing the Enter
button. After pressing Enter to view the two profiles, pressing it a third time will
automatically alternate the Speed and Incline displays, showing each one for five seconds.
MESSAGE WINDOW DISPLAY
The Message Window will initially display Program Name. Each time the Display button is
pressed the next set of information will appear. The order of information displayed will be: Pace,
Incline, Laps, Verticle, Segment Time, Max Speed (in mph), and Data Scan mode. In Data
Scan mode, the displayed information will change every 4 seconds in the Message Window.
1/4 MILE TRACK
The 1/4 mile track is displayed around the dot matrix window. The flashing dot indicates your
progress. The number of laps you complete are accumulated in the lap counter, which is viewed
in the Message Window.
CALORIE DISPLAY
Displays the cumulative calories burned at any given time during your workout.
Note: This is only a rough guide used for comparison of different exercise sessions, which cannot be
used for medical purposes.
There is an Audio Input Jack ( ) on the front of the console and built-in speakers. You may
plug any low-level audio source signal into this port. Audio sources include MP3, iPod, portable
radio, CD player or even a TV or computer audio signal. There is an audio patch cable included
to and also a headphone jack ( ) for private listening.
15
T4 TREADMILL
LISTENING TO YOUR DEVICE WIRELESSLY OVER
BLUETOOTH®
Pairing and connecting with a Bluetooth source device (smartphone/tablet PC)
To listen to your music over Bluetooth wireless connection, you need to pair your device with the
fitness equipment:
1. Make sure that a 3.5 mm audio cable is not connected to the speaker's audio input.
2. Place your Bluetooth source device within 33 feet (10 meters) of the fitness equipment.
3. Make sure your device has Bluetooth capability and that it is enabled.
4. Follow the instructions of your device to pair the speaker.
5. Pair your devicewith the speaker by selecting “BT-Speaker” from your Bluetooth listings on
your device. The console will produce an audio prompt upon successful connection of the
device.
6. Press play on your device and use controls on your device to adjust desired volume.
7. Please be sure volume settings on your device are at an appropriate level.
Connect the speaker with 3.5mm audio cable
You can also connect to portable (smartphone/tablet PC) speaker with a 3.5mm audio cable to hear
your music if you do not want to use Bluetooth. Keep the speaker in OFF mode first, then connect
the cable to the line in socket of your audio source.
Disconnecting from a Bluetooth source device (smartphone/tablet PC)
To disconnect your fitness equipment Bluetooth Speaker from a Bluetooth source device you can:
• Move your speaker and the Bluetooth source device apart until they disconnect.
• Power off your fitness equipment.
• Power off the source device.
• Power off Bluetooth on your source device.
• Plug an audio cable into the speakers audio input jack.
Reconnecting
• To reconnect to a Bluetooth source device to which you have previously paired, just power on the
speaker and the source device, and place them within 33 feet (10 meters) of each other.
It’s also necessary that no cable be plugged into the audio input jack.
Typically, the speaker and the source device will reconnect automatically.
Answering a Call
To answer a call, wait for the speakerphone (smartphone) to ring with a voice alert “Calling”, tap on
your smartphone to accept/decline the call.
T4 TREADMILL
16
NOTE:
•ONLY use your smartphone microphone for the call.
•Please try to keep 30-50cm distance from speaker when answering a call.
•If you get an incoming call when your smartphone is connected to speaker, the music will stop and
your ringtone will play.
Ending a Call
You can end the call via your Smartphone in the normal way.
Trouble Shooting
If you are unable to connect your fitness equipment speaker and your source device, please try the
following:
Ensure the speaker is paired with your source device.
Ensure your source device’s Bluetooth feature is activated. Please refer to your device user
guide for specific instruction.
Ensure the speaker is within a maximum of 33 feet (10 meters) of your device and there are no
obstructions, such as thick solid wall or other electronic devices in between as it may cause
shorter or interference transmission.
If all the above steps do not resolve your problem, please turn off the fitness equipment for a
while. The Bluetooth speaker is compliance with and adopts the Bluetooth Specification V3.0.
However, interoperability between the device and other Bluetooth-enable products is not
guaranteed because it depends on compatibility. For more information on the compatibility
between the device with other Bluetooth- enabled products, please check with the
manufacturer/importer.
If you are not able to link up with Bluetooth, please check whether any other devices are
connected with the Bluetooth speaker, or the speaker did not link up the audio and media
channel of the devices after pairing.
17
T4 TREADMILL
PULSE FEATURE
The Pulse (Heart Rate) Window will display your current heart rate in beats per minute
during the workout. You must use both stainless steel sensors on the front cross bar to display
your pulse or wear the wireless chest strap. The pulse value will display anytime the upper
display is receiving a pulse signal.
TURNING OFF TREADMILL
1. The display will automatically turn off – go to sleep - after 30 minutes of inactivity when in
the Pause / Stop mode. Almost all power for the treadmill will be off except for some circuits
that are needed to detect if any key is pressed, indicating the console should “wake up”. When
the console is “asleep” the treadmill draws very little power, about as much as your television
when it is turned off.
2. Removing the Safety Key is similar to entering “sleep” mode. Turning off the main power
switch in the front of the treadmill will completely remove any power.
**ATTENTION**
Your new console comes configured in an in-store ‘Display Mode’ of operation, where the
console will remain powered on unless the main power switch is turned off. To exit the display
mode, for normal operation, press and hold the Stop, Enter and Display keys for 5 seconds;
the display will show: Display mode - On. Use any of the Program, Incline or Speed 5 keys to
change the setting to Off then press Enter.
T4 TREADMILL
18
PROGRAMMABLE FEATURES
The T4 has ten built-in programs: one Manual program, five preset profiles (P1-P5), two user
defined programs (U1 & U2) and two Heart Rate programs (HR1 & HR2).
Hill
The Hill program simulates going up and down a hill. The workload will steadily increase and then
decrease during the program.
SPEED
INCLINE
Fat Burn
The Fat Burn program is designed, as the name implies, to maximize the burning of fat. There are many
schools of thought on the best way to burn fat but most experts agree that a lower exertion level that
stays at a steady work- load is the best. The absolute best way to burn fat is to keep your heart rate at
around 60% to 70% of its maximum potential. This program does not use heart rate but simulates a
lower, steady exertion workout.
SPEED
INCLINE
Cardio
The Cardio program is designed to increase your cardiovascular function and endurance. This is
exerciseyou’re your heart and lungs. It will build up your heart muscle and increase blood flow and lung
capacity. This is achieved by incorporating a higher level of exertion with slight fluctuations in work.
SPEED
INCLINE
Strength
The Strength program is designed to increase muscular strength in your lower body. This program will
steadily increase in workload to a high level and forces you to sustain it. This is designed to strengthen and
tone your legs and glutes (muscles of the butt).
SPEED
INCLINE
Interval
The Interval program takes you through high levels of intensity followed by periods of low intensity. This
program increases your endurance by depleting your oxygen level followed by periods of recovery to
replenish oxygen. Your cardiovascular system gets programmed to use oxygen more efficiently this way.
This program also forces your body to become more efficient due to spikes in heart rate, between
recovery periods. This aids in heart rate recovery from intense activities.
SPEED
INCLINE
19
T4 TREADMILL
SELECTING A PROGRAM
1. Press the Program ▲/▼ keys to view the programs on the screen then press the Enter key to
select the program you would like to perform. The display will prompt you through the
programming steps or you can just press the Start key to begin the program using the preset
program values for age, weight and other program specific information.
2. If Enter was pressed, the Message Window will display Age. You may use any of the ▲/▼
keys to adjust your age. After adjusting press the Enter key.
Note: You may press Start at any time during the programming to start the program with the
information you’ve already input.
3. The Message Window will now be displaying a value, which is your body weight. Entering the
correct body weight will affect the calorie count. Use any of the ▲/▼ keys to adjust, then
press Enter.
Calorie Display Note: No exercise machine can give you an exact calorie count because there are
too many factors which determine exact calorie burn for a particular person. Even if someone is
the exact same body weight, age and height, their calorie burn may be very differ- ent than yours.
The Calorie display is to be used as a reference only to monitor improvement from workout to
workout.
4. The Time Window and Message Window will now be displaying a value, which is total
workout time desired. Use any of the ▲/▼ keys to adjust, and then press Enter. After
adjusting, press the Enter key.
5. The Message Window will display the preset max speed of the selected program. Use any of
the ▲/▼ keys to adjust, and then press Enter. Each program has various speed changes
throughout; this allows you to limit the highest speed the program will reach at it’s peak.
6. Press Start to begin the program. The program will begin with a 3 minute warm-up. If you want
to bypass this and go directly to the beginning of the program, press Start again.
T4 TREADMILL
20
USER PROGRAMS
1. Select User 1 or User 2 via the Program ▲/▼ keys then press
Enter. Note that the dot matrix display portion will have a
single row of dots at the bottom (Unless there is a previously
stored program). If there is a program stored under the button
that is pressed, it will be retrieved. If not, you have the option of
programming in your first name. The Message Window will
display and flash the letter ”A” . To change it, press the any
▲key, then “B” will be displayed; if the any ▼ key is pressed,
the letter “Z” will be displayed. After selecting the appropriate
letter, press Enter. The letter “A” will again be displayed and
blinking. Repeat the procedure until all letters of your first
name are programmed (7 characters maximum). When your
name is displayed, press Stop and it will be stored under either
User 1 or User 2.
2. Next the Message Window is flashing Age. Use the Incline
▲/▼ keys to adjust. Press Enter. This is a must to continue even if age is not adjusted.
3. The Message Window will now be blinking a body weight value. Enter your body weight and
press Enter.
4. The Time Window and Message Window will now be blinking a Time value. Adjust the Time
and press Enter.
5. The first column (segment) will now be blinking. Using the Speed ▲/▼ or Quick keys,
adjust the speed level to your desired effort for the first segment then press Enter. The
second column will now be blinking. Repeat the above process until all segments have been
programmed. The first column will be blinking again. This is for the incline programming.
Repeat the above process to program all segments for incline.
6. Press the Start button to begin the workout and also save the program to memory.
21
T4 TREADMILL
HEART RATE PROGRAMS
Before we get started, a word about Heart Rate:
The old motto, “no pain, no gain”, is a myth that has been overpowered by the benefits of
exercising comfortably. A great deal of this success has been promoted by the use of heart rate
monitors. With the proper use of a heart rate monitor, many people find that their usual choice
of exercise intensity was either too high or too low and exercise is much more enjoyable by
maintaining their heart rate in the desired benefit range.
To determine the benefit range in which you wish to train, you must first determine your
Maximum Heart Rate. This can be accomplished by using the following formula: 220 minus your
age. This will give you the Maximum Heart Rate (MHR)for someone of your age. To determine
the effective heart rate range for specific goals you simply calculate a percentage your MHR.
Your Heart rate training zone is 50% to 90% of your maximum heart rate. 60% of your MHR is
the zone that burns fat while 80% is for strengthening the cardio vascular system. This 60% to
80% is the zone to stay in for maximum benefit.
For someone who is 40 years old their
target heart rate zone is calculated:
220 – 40 = 180 (maximum heart rate)
180 x .6 = 108 beats per minute
(60% of maximum)
180 X .8 = 144 beats per minute
(80% of maximum)
So for a 40 year old the training zone would be
108 to 144 beats per minute.
If you enter your age during programming the console will perform this calculation
automatically. Entering your age is used for the Heart Rate programs. After calculating your MHR
you can decide upon which goal you would like to pursue.
The two most popular reasons for, or goals, of exercise are cardiovascular fitness (training for the
heart and lungs) and weight control. The black columns on the chart above represent the MHR
for a person whose age is listed at the bottom of each column. The training heart rate, for either
cardiovascular fitness or weight loss, is represented by two different lines that cut diagonally
through the chart. A definition of the lines’ goal is in the bottom left-hand corner of the chart. If
your goal is cardiovascular fitness or if it is weight loss, it can be achieved by training at 80% or
60%, respectively, of your MHR on a schedule approved by your physician. Consult your
physician before participating in any exercise program.
T4 TREADMILL
22
RATE OF PERCEIVED EXERTION
Heart rate is important but listening to your body also has a lot of advantages. There are more
variables involved in how hard you should workout than just heart rate. Your stress level,
physical health, emotional health, temperature, humidity, the time of day, the last time you ate
and what you ate, all contribute to the intensity at which you should workout. If you listen to
your body, it will tell you all of these things.
The rate of perceived exertion (RPE), also know as the Borg scale, was developed by Swedish
physiologist G.A.V. Borg. This scale rates exercise intensity from 6 to 20 depending upon how
you feel or the perception of your effort.
The scale is as follows:
Rating Perception of Effort
6 Minimal
7 Very,very light
8 Very,very light +
9 Very light
10 Very light +
11 Fairly light
12 Comfortable
13 Somewhat hard
14 Somewhat hard +
15 Hard
16 Hard +
17 Very hard
18 Very hard +
19 Very,very hard
20 Maximal
You can get an approximate heart rate level for each rating by simply adding a zero to each
rating. For example a rating of 12 will result in an approximate heart rate of 120 beats per
minute. Your RPE will vary depending up the factors discussed earlier. That is the major benefit
of this type of training. If your body is strong and rested, you will feel strong and your pace will
feel easier. When your body is in this condition, you are able to train harder and the RPE will
support this. If you are feeling tired and sluggish, it is because your body needs a break. In this
condition, your pace will feel harder. Again, this will show up in your RPE and you will train at
the proper level for that day.
23
T4 TREADMILL
USING HEART RATE TRANSMITTER
How to wear your wireless chest strap transmitter:
1. Attach the transmitter to the elastic strap using the locking parts.
2. Adjust the strap as tightly as possible as long as the strap is not too
tight to remain comfortable.
3. Position the transmitter with the centered in the middle of your
body facing away from your chest (some people must position the
transmitter slightly left of center). Attach the final end of the elastic
strap by inserting the round end and, using the locking parts,
secure the transmitter and strap around your chest.
4. Position the transmitter immediately below the pectoral muscles.
5. Sweat is the best conductor to measure very minute heart beat electrical signals.
However, plain water can also be used to pre-wet the electrodes (2 ribbed oval areas on
the reverse side of the belt and both sides of the transmitter). It’s also recommended that
you wear the transmitter strap a few minutes before your work out. Some users, because
of body chemistry, have a more difficult time in achieving a strong, steady signal at the
beginning. After “warming up”, this problem lessens. As noted, wearing clothing over the
transmitter/strap doesn’t affect performance.
6. Your workout must be within range - distance between transmitter/receiver – to achieve
a strong steady signal. The length of range may vary somewhat but generally stay close
enough to the console to maintain good, strong, reliable readings. Wearing the
transmitter immediately against bare skin assures you of proper operation. If you wish,
you may wear the transmitter over a shirt. To do so, moisten the areas of the shirt that the
electrodes will rest upon.
Note: The transmitter is automatically activated when it detects activity from the user’s heart. Additionally, it
automatically deactivates when it does not receive any activity. Although the transmitter is water resistant,
moisture can have the effect of creating false signals, so you should take precautions to completely dry the
transmitter after use to prolong battery life (estimated transmitter battery life is 2500 hours). The replacement
battery is Panasonic CR2032.
ERRATIC OPERATION
Caution! Do not use this treadmill for Heart Rate unless a steady, solid Actual Heart Rate value is
being displayed. High, wild, random numbers being displayed indicate a problem.
Areas to look for interference which may cause erratic heart rate:
1.
2.
3.
4.
5.
6.
7.
8.
Microwave ovens, TV’s, small appliances, etc.
Fluorescent lights.
Some household security systems.
Perimeter fence for a pet.
Some people have problems with the transmitter picking up a signal from their skin. If you have problems
try wearing the transmitter upside down. Normally the transmitter will be oriented so the FUEL logo is right
side up.
The antenna that picks up your heart rate is very sensitive. If there is an outside noise source, turning the
whole machine 90 degrees may de-tune the interference.
Loose treadmill console or bolts in the upright tube.
Another Individual wearing a transmitter within 3’ of your machine’s console.
If you continue to experience problems contact your dealer.
WARNING! - DO NOT USE THE HEART RATE PROGRAM IF YOUR HEART RATE IS NOT REGISTERING PROPERLY ON THE TREADMILL’S DISPLAY!
T4 TREADMILL
24
HEART RATE PROGRAMMING
CAUTION!
Heart Rate programs are intended for wireless transmitter chest strap only. Do not use Pulse
Grip bar for Heart Control. You must receive a strong/steady value in the Heart Rate Window
(See Using Heart Rate Transmitter section for instructions on how to use).
The HR1 program has a default level that is 60% of your projected heart rate maximum. This
program is geared for individuals with fat loss as a goal. The HR2 program has a default of 80% of
your projected heart rate maximum. It is geared for individuals with a goal of improving
cardiovascular & lung function.
1. Select HR1 or HR2 via the Program ▲/▼keys then press Enter.
2. The Message Window will now be blinking showing user’s age. Adjust and press Enter or press
Enter to accept the default value. Adjusting Age will change the Target HR value.
3. The Message Window will be blinking, showing the default user’s bodyweight for this program. You may adjust it and press Enter if you want or just press Enter to accept the default
value.
4. Now you are asked to adjust the HR1 or HR2 value. The default is 60% (HR1); (220 - age x .60); or
80% (HR2); (220 – age x .80). You may select a higher or lower number also. Adjust the number
by pressing the Speed▲/▼ keys (console or handrails) and press Enter to continue.
5. The Time Window and Message Window will now be blinking. Adjust the time and press Enter.
6. Now you are finished editing the settings and can begin your workout by pressing the Start key.
You can also go back and modify your settings by pressing the Stop key to go back one level, or
screen.
7. If you want to increase or decrease the speed at any time during the program press the Speed
▲/▼ (console or handrail) keys.
8. During the HR program you will be able to scroll through the data in the Message Window by
pressing the Display key. When the program ends the Message Window will show a summary
of your workout. The summary will be displayed for a short time then the console will return to
the start-up display.
9. Press Start to begin program.
The program will now control the treadmill to steadily increase your heart rate to the target
value. This process is automatic and could take upwards of five minutes, depending on how far
your HR needs to go and what kind of physical shape you are in. People who are more fit will
take longer to reach the target.
25
T4 TREADMILL
GENERAL MAINTENANCE
BELT & DECK
Your treadmill uses a very high-efficient low-friction deck. Performance is maximized when the
deck is kept as clean as possible. Use a soft, damp cloth, or paper towel, wipe the edge of the
belt and the area between the belt edge and the frame. Also reach as far as practical directly
under the belt edge. This should be done once a month to extend belt and bed life. A mild soap
and water solution along with a nylon scrub brush will clean the top of the textured belt. Allow
to dry before using.
BELT DUST
This occurs during normal break-in or until the belt stabilizes. Sometimes the black dust from
the belt will appear on the floor behind the treadmill, this is normal.
GENERAL CLEANING (Use the chart on Pg. 5 to record your maintenance)
Dirt, dust, and hair can block air inlets and accumulate on the running belt. Please vacuum
underneath your treadmill on a monthly basis to prevent excess build-up of dirt that can get
sucked up and get into the inner workings under the motor cover. Every other month, you
should remove the motor cover and carefully vacuum out dirt and hair that may
accumulate. UNPLUG THE POWER CORD BEFORE THIS TASK.
BELT ADJUSTMENTS
Tread-belt Tension Adjustment - Belt tension is not critical for most users. It is very important
though for joggers and runners in order to provide a smooth, steady running surface.
Adjustment must be made from the rear roller with the M6 L Allen wrench (132) provided in the
parts package. The adjustment bolts are located at the end of the step rails as shown in the
diagram below. Note: Adjustment is through small hole in end cap.
Tighten the rear roller only enough to prevent
Note: Adjustment is through small hole in end cap.
slippage at the front roller. Turn the tread-belt
tension adjusting bolts 1/4 turn each and inspect
for proper tension by walking on the belt and
making sure it is not slipping or hesitating with
each step. When an adjustment is made to the belt
tension, you must be sure to turn the bolts on both
sides evenly or the belt could start tracking to one
side instead of running in the middle of the deck.
DO NOT OVERTIGHTEN – Over tightening will cause belt damage and premature bearing
failure. If you tighten the belt a lot and it still slips, the problem could actually be the drive belt
- located under the motor cover - that connects the motor to the front roller. If that belt is loose
it feels similar to the walking belt being loose. Tightening the motor belt should be done by a
trained service person.
T4 TREADMILL
26
TREAD-BELT TRACKING ADJUSTMENT
The treadmill is designed so that the tread-belt remains reasonably centered while in use. It is
normal for some belts to drift near one side while in use, depending on a user’s gait and if they
favor one leg. But if during use the belt continues to move toward one side, adjustments are
necessary.
SETTING TREAD-BELT TRACKING
A 6 mm Allen wrench (132)is provided for this
adjustment. Make tracking adjustments on the
left side bolt. Set belt speed at 3 mph. Be aware
that a small adjustment can make a dramatic
difference which may not be apparent right away.
If the belt is too close to the left side, then turn
the bolt only a 1/4 turn to the right (clockwise)
and wait a few minutes for the belt to adjust itself.
Continue to make 1/4 turns until the belt stabilizes in the center of the running deck.
If the belt is too close to the right side, turn the bolt counter-clockwise. The belt may require
periodic tracking adjustment depending on use and walking/running characteristics. Some
users may affect tracking differently. Expect to make adjustments as required to center the
tread-belt. Adjustments will become less of a maintenance concern as the belt is used. Proper
belt tracking is an owner responsibility common with all treadmills.
ATTENTION:
DAMAGE TO THE RUNNING BELT RESULTING FROM IMPROPER TRACKING / TENSION
ADJUSTMENTS IS NOT COVERED UNDER THE FUEL WARRANTY.
TREADMILL BELT
The walking belt on your new FUEL treadmill is made of the highest quality materials designed
to last even under punishing conditions. When a treadmill belt is brand new, and has been in
the package for a few months before use, a common occurrence can happen; the area of the
belt that wraps around the rollers will take on the shape of the roller. Upon starting the
treadmill this shape in the belt causes a thumping sound each time the belt moves past the
rollers. Once the treadmill has been used for a few workouts, the belt wears in and the
thumping sound goes away. This noise is normal on new higher end belts so there is no need
to contact service; the new belt just requires a wear in period. Thank you for choosing FUEL
and enjoy your new treadmill.
27
T4 TREADMILL
BELT/DECK LUBRICATION
First, you want to clean between the belt and deck to remove any debris that may be trapped.
Use a clean, non-fraying rag, t-shirt, or light towel. Halfway between the end of the treadmill
and motor cover, shove the garment under the belt until you can grasp it on both sides of the
belt. Drag the garment the length of the entire belt 1-2 times. Remove the garment.
Do not lubricate with anything other than Fuel Fitness approved lubricant. Your treadmill comes
with one tube of “Lube” and extra tubes can be ordered directly from Fuel Fitness or your
authorized Fuel Fitness dealer. You may also use a Lube-n-Walk kit that can be purchased
through both aforementioned sellers.
Keeping the deck lubricated at the recommended intervals ensures the longest life possible for
your treadmill. If the lubricant dries out, the friction between the belt and deck rises and places
undue stress on the drive motor, drive belt and electronic motor control board, which could
result in catastrophic failure of these expensive components. Failure to lubricate the deck at
regular intervals may void the warranty.
The belt & deck come pre-lubricated and subsequent lubrication should be performed every 90
hours of use or if you notice that the deck is dry. It is recommended that you reach between the
belt and deck to verify there is lubrication present, every other month. If you check and there
isn’t any lubrication present, follow the procedure below even though the “Lube” indicator isn’t
lit on the console. Otherwise, lubricate when the console’s lubrication reminder lights after 90
hours of use. Use the following procedure to apply the silicone lubricant:
1. Turn the power switch off and unplug the power cord from the wall outlet
2. Measure 18” from the edge of the motor cover; kneel down and reach under the belt
approximately 4- 6” from one edge. Squirt a line of lubricant about 1/8” wide x 15” long
in an “S” pattern perpendicular to the motor cover.
3. Repeat the process on the opposite side.
4. Plug the electrical cord back into the outlet and turn the power switch on.
5. Walk on the belt at a moderate speed for five minutes to evenly distribute the silicone
lube.
6. If the “Lube” message appears on the console, perform the following procedure to reset
the message:
1. To enter the Engineering Mode Menu press and hold down the Start, Stop and Enter
keys, then at the same time insert the Safety Key. Keep holding the keys down until
the Message Window displays Engineering Mode Menu. Press the Enter button to
access.
2. Press the Speed ▲ button (or Speed ▼ button to go backwards) until “Functions”
appears; press Enter.
3. Press the Speed ▲ button until “Maintenance” message appears; press Enter to reset
the lube message.
4. Press Stop to exit Engineering Mode and resume use of your treadmill.
T4 TREADMILL
28
SERVICE CHECKLIST - DIAGNOSIS GUIDE
Before contacting your dealer for aid, please review the following information. It may save you
both time and expense. This list includes common problems that may not be covered under the
treadmill’s warranty.
PROBLEM
SOLUTION/CAUSE
1.
2.
Display does not light
3.
4.
5.
Tether cord not in position.
Circuit breaker on front grill tripped.
Push circuit breaker in until it locks.
Plug is disconnected. Make sure plug is firmly
pushed into AC household wall outlet.
Household circuit breaker may be tripped.
Treadmill defect. Contact your FUEL dealer.
Tread-belt does not stay centered
Treadmill belt hesitates when
walked/run on
The user may be walking while favoring or putting
more weight on either the left or right foot. If this
walking pattern is natural, track the belt slightly
off-center to the side opposite from the belt
movement. See General Maintenance section on
Tread-belt Tension. Adjust as necessary.
Motor is not responsive after
pressing Start
1.
Treadmill will only achieve
approximately 7 mph but shows
higher speed on display
This indicates motor should be receiving power to
operate. Low AC voltage to treadmill. Do not use an
extension cord. If an extension cord is required it
should be as short as possible and heavy duty 16
gauge minimum. Low household voltage. Contact an
electrician or your FUEL dealer. A minimum of 110 volt
AC current is required.
Tread-belt stops quickly/suddenly
when tether cord is pulled
High belt/deck friction. See General Maintenance
section on lubrication.
Treadmill trips on board 15 amp circuit
High belt/deck friction. See General Maintenance
Computer shuts off when conFUEL
is touched (on a cold day) while
walking/running
Treadmill may not be grounded. Static electricity is
“crashing” the computer. Refer to Grounding
Instructions on page 3.
House circuit breaker trips, but not
the treadmill circuit breaker
Need to replace the house breaker with a “High
In-rush current” type breaker (see page 3 for details)
2.
29
If the belt moves, but stops after a short time and
thedisplay shows “LS”, run calibration.
If you press Start and the belt never moves, then
the display shows LS, contact service.
T4 TREADMILL
CALIBRATION PROCEDURE
1. Remove the Safety Key.
2. Press and hold down the Start and Speed ▲ buttons and replace the Safety Key.
Continue to hold the Start and Speed ▲ key until the window displays “Factory settings”,
then press the Enter key.
3. You will now be able to set the display to show Metric or English settings (Miles vs.
Kilometers). To do this, press the ▲/▼ key to show which you want, then press Enter.
4. Make sure the wheel size diameter is 2.36 then press Enter.
5. Adjust the minimum speed (if needed) to 0.5 and then press Enter.
6. Adjust the maximum speed (if needed) to 12.0 and then press Enter.
7. Adjust the maximum elevation (if needed) to 15 and then press Enter.
8. Grade return – On (This allows the incline to return to zero when Stop is pressed. For sale in
Europe, EU standards require this to be off )
9. Press Start to begin calibration. The process is automatic; the speed will start up without
warning, so do not stand on the belt.
ADJUSTING THE SPEED SENSOR
If the calibration does not pass you may need to check the speed sensor alignment.
1. Remove the motor cover hood by loosening the 4 screws that
hold it in place (you do not need to remove them completely).
2. The speed sensor is located on the left side of the frame, right
next to the front roller pulley (the pulley will have a belt around
it that also goes to the motor). The speed sensor is small and
black with a wire connected to it.
3. Make sure the sensor is as close as possible to the pulley without
touching it. You will see a magnet on the face of the pulley; make
sure the sensor is aligned with the magnet. There is a screw that
holds the
sensor in place that needs to be loosened to adjust the sensor. Re-tighten the screw when
finished.
MAINTENANCE MENU
1. Press and hold the Start, Stop and Enter key at the same time, until the display shows
“Engineering mode” (it may say maintenance menu, depending on version).
Press the Enter key.
2. You can now scroll through the menu using the Speed ▲/▼ keys. Use the Stop key to
return to previous menu selection. The menu selections are:
A. Key Test - Will allow you to test all the keys to make sure they are functioning
B. Display Test - Tests all the display functions
C. Functions - Press Enter to access settings, use Speed ▲/▼ keys to scroll
I. Display Mode - Turn off to have the console power down automatically after 30 minutes of inactivity
II. Pause Mode - Turned on to allow 5 minutes of pause, turn off to have console pause in definitely
III. Maintenance - Reset lube message and odometer readings
IV. Units - Choose from English or Metric display readings
V. Key Tone - Will turn on/off beeping noise that is made when keys are pressed.
D. Security - Allows you to lock the keypad so no unauthorized use of the machine is allowed. When the child
lock is enabled, the console will not allow the keypad to operate unless you press and hold the Start and
Enter buttons for 3 seconds to unlock the console.
E. Exit
T4 TREADMILL
30
Manufacturer’s Limited Warranty
Effective August 1, 2017 -TREADMILL LIMITED WARRANTY
FUEL Fitness Inc. warrants all its home use Treadmill parts for a period of time listed below, from the date of retail sale, as determined by a sales
receipt or in the absence of a sales receipt, eighteen (18) months from the original factory shipping date. FUEL Fitness’
responsibilities include providing new or remanufactured parts, at FUEL Fitness’ option, and technical support to our independent dealers and servicing organizations. In the absence of a dealer or service organization, these warranties will be administered by FUEL Fitness directly to a consumer. The
warranty period applies to the following components:
Home Use Limited Warranty
Drive Motor
Deck
All Other Components
Frame Weldments
Labor
Cosmetic Items *
Lifetime
3 Years
3 years
Lifetime
1 Year
90 Days
*Cosmetic items including, but not limited to the following: grips, console overlays, and labels/decals.
NORMAL RESPONSIBILITIES OF THE CONSUMER
This warranty applies only to products in ordinary household use. The consumer is responsible for the items listed below:
1. The warranty registration card must be completed and returned to the address listed on the card within 10 days of the original purchase to
validate the manufacturer’s limited warranty or register online at the FUEL Fitness website.
2. Proper use of the Treadmill in accordance with the instructions provided in this manual, including maintenance.
3.
Proper connectiion to a power supply of sufficient voltege, replacement of blown fuses, repair of loose connections or defects in house/facility
wiring.
4. Expenses for making the Treadmill accessible for servicing, including any item that was not part of the Treadmill at the time it was shipped
from the factory.
5. Damages to the Treadmill finish during shipping, installation or following installation.
EXCLUSIONS
This warranty does not cover the following:
1. CONSEQUENTIAL, COLLATERAL, OR INCIDENTAL DAMAGES SUCH AS PROPERTY DAMAGE AND INCIDENTAL
EXPENSESRESULTING FROM ANY BREACH OF THIS WRITTEN OR ANY IMPLIED WARRANTY. Note: Some states do not allow the exclusion or limitation of incidental or consequential damages, so this limitation or exclusion may not apply to you.
2. Service call reimbursement to the consumer. Service call reimbursement to the dealer that does not involve malfunction or defects in workmanship or material, for units that are beyond the warranty period, for units that are beyond the service call reimbursement period, for Treadmills
not requiring component replacement, or Treadmills not in ordinary household use.
3. Damages caused by services performed by persons other than authorized FUEL Fitness service companies, use of parts other than original FUEL
Fitness parts, or external ca uses such as alterations, modifications, abuse, misuse, accident, improper maintenance, inadequate power supply, or
acts of God.
4. Products with original serial numbers that have been removed or altered.
5. Products that have been; sold, transferred, bartered, or given to a third party.
6. Products that are used as store display models.
7. Products that do not have a warranty registration on file at FUEL Fitness lnc. FUEL Fitness reserves the right to request proof of
purchase if no warranty record exists for the product.
8. Product use in any environment other than a residential setting.
9. THIS WARRANTY IS EXPRESSLY IN LIEU OF ALL OTHER WARRANTIES EXPRESSED OR IMPLIED, INCLUDING THE
WARRANTIES OF MERCHANTABILITY AND/OR FITNESS FOR A PARTICULAR PURPOSE.
SERVICE
Keep your bill of sale. Twelve (12) months from the date on the bill of sale or eighteen (18) months from the date of factory shipping as
determined by the serial number establishes the warranty period should service be required. If service is performed, it is in your best interest to obtain
and keep all receipts. This written warranty gives you specific legal rights. You may also have other rights that vary from state to state. Service under
this warranty must be obtained by following these steps, in order:
1. Contact your selling authorized FUEL Fitness dealer. OR
2. Contact your local authorized FUEL Fitness service organization.
3. If there is a question as to where to obtain service, contact our service department at (866)697-6531.
4. FUEL Fitness’ obligation under this warranty is limited to repairing or replacing, at FUEL Fitness’ option, the product through one of our authorized service centers. All repairs must be preauthorized by FUEL Fitness. If the product is shipped to a service center freight charges to and from
the service center will be the customer’s responsibility. For replacement parts shipped while the product is under warranty, the customer will
be responsible for shipping and handling charges. For in-home service, the customer will be responsible for a trip charge. There will be an additional trip charge if the customer is located over 100 miles from the nearest service center.
5. The owner is responsible for adequate packaging upon return to FUEL Fitness. FUEL Fitness is not responsible for damages in shipping. Make
all freight damage claims with the appropriate freight carrier. DO NOT SHIP ANY UNIT TO OUR FACTORY WITHOUT A RETURN AUTHORIZATION
NUMBER. All units arriving without a return authorization number will be refused.
6. For any further information, or to contact our service department by mail, send your correspondence to:
FUEL Fitness, Inc.
P.O. Box 2037
Jonesboro, AR 72402-2037
Product features or specifications as described or illustrated are subject to change without notice. All warranties are made by
FUEL Fitness, Inc. This warranty applies only in the 48 contiguous United States. NOTE: This does not include Alaska or Hawaii.
31
T4 TREADMILL
Before returning your fuel product to any retailer, or if you require any
assistance with assembly or technical support please call us first for
assistance at 866-697-6531. Thank you for your Fuel purchase.
T4 TREADMILL
32