ManualsLib - Makes it easy to find manuals online!

HP Mini 110 and Compaq Mini CQ10
Maintenance and Service Guide
Downloaded from www.Manualslib.com manuals search engine
© Copyright 2010 Hewlett-Packard
Development Company, L.P.
Intel is a trademark of Intel Corporation in
the U.S. and other countries. Microsoft,
Windows, and Windows Vista are U.S.
registered trademarks of Microsoft
Corporation.
The information contained herein is subject
to change without notice. The only
warranties for HP products and services are
set forth in the express warranty statements
accompanying such products and services.
Nothing herein should be construed as
constituting an additional warranty. HP shall
not be liable for technical or editorial errors
or omissions contained herein.
First Edition: August 2010
Document Part Number: 605295-001
Downloaded from www.Manualslib.com manuals search engine
MSG revision history
Revision
Publication Date
Description
A
August 2010
Updated spare parts throughout MSG.
iii
Downloaded from www.Manualslib.com manuals search engine
iv
MSG revision history
Downloaded from www.Manualslib.com manuals search engine
Safety warning notice
WARNING! To reduce the possibility of heat-related injuries or of overheating the device, do not
place the device directly on your lap or obstruct the device air vents. Use the device only on a hard, flat
surface. Do not allow another hard surface, such as an adjoining optional printer, or a soft surface,
such as pillows or rugs or clothing, to block airflow. Also, do not allow the AC adapter to contact the
skin or a soft surface, such as pillows or rugs or clothing, during operation. The device and the AC
adapter comply with the user-accessible surface temperature limits defined by the International
Standard for Safety of Information Technology Equipment (IEC 60950).
v
Downloaded from www.Manualslib.com manuals search engine
vi
Safety warning notice
Downloaded from www.Manualslib.com manuals search engine
Table of contents
1 Product description ........................................................................................................... 1
2 External component identification ..................................................................................... 5
Identifying the hardware ...........................................................................................................
Top components .......................................................................................................................
TouchPad .................................................................................................................
Lights .......................................................................................................................
5
6
6
7
Keys ........................................................................................................................ 8
Front components ..................................................................................................................... 8
Right-side components ............................................................................................................ 10
Left-side components ............................................................................................................... 11
Display components ............................................................................................................... 12
Bottom components ................................................................................................................ 13
3 Illustrated parts catalog .................................................................................................. 14
Service tag ............................................................................................................................ 14
Computer major components ................................................................................................... 15
Display assembly components ................................................................................................. 22
Mass storage devices ............................................................................................................. 24
Miscellaneous parts ................................................................................................................ 25
Sequential part number listing .................................................................................................. 26
4 Removal and replacement procedures ............................................................................ 31
Preliminary replacement requirements ....................................................................................... 31
Tools required ......................................................................................................... 31
Service considerations ............................................................................................. 31
Plastic parts ............................................................................................. 31
Cables and connectors ............................................................................. 32
Drive handling ......................................................................................... 32
Grounding guidelines .............................................................................................. 33
Electrostatic discharge damage .................................................................. 33
Packaging and transporting guidelines ........................................ 34
Workstation guidelines .............................................................. 34
vii
Downloaded from www.Manualslib.com manuals search engine
Equipment guidelines ................................................................. 35
Component replacement procedures ........................................................................................ 36
Service tag ............................................................................................................. 36
Computer feet ......................................................................................................... 37
Battery ................................................................................................................... 38
SIM ....................................................................................................................... 39
Service cover .......................................................................................................... 40
Hard drive ............................................................................................................. 41
WWAN module ..................................................................................................... 43
WLAN module ........................................................................................................ 46
Memory module ...................................................................................................... 51
RTC battery ............................................................................................................ 53
Keyboard ............................................................................................................... 54
Top cover ............................................................................................................... 57
Speakers ................................................................................................................ 60
TouchPad ............................................................................................................... 62
Display assembly .................................................................................................... 64
System board ......................................................................................................... 68
Fan/heat sink assembly ........................................................................................... 71
Power connector cable ............................................................................................ 73
5 Setup Utility .................................................................................................................... 75
Starting Setup Utility ............................................................................................................... 75
Using Setup Utility .................................................................................................................. 75
Changing the language of Setup Utility ...................................................................... 75
Navigating and selecting in Setup Utility .................................................................... 76
Displaying system information .................................................................................................. 76
Restoring default settings in Setup Utility .................................................................................... 76
Exiting Setup Utility ................................................................................................................ 77
Setup Utility Menus ................................................................................................................. 77
Main Menu ............................................................................................................ 77
Security Menu ......................................................................................................... 77
System Configuration Menu ...................................................................................... 78
Diagnostics Menu ................................................................................................... 78
6 Backup and recovery ...................................................................................................... 79
Windows 7 ...........................................................................................................................
Backing up and recovering using Roxio BackOnTrack .................................................
Creating a copy of the hard drive ..............................................................
Performing a recovery ...............................................................................
Using the Disaster Recovery utility ..............................................................
Downloading and extracting the Disaster Recovery utility ...............
Restoring your hard drive image .................................................
viii
Downloaded from www.Manualslib.com manuals search engine
79
79
80
80
80
81
81
Using the Instant Restore utility .................................................................................. 82
Using the Instant Restore utility when the operating system is functioning ......... 82
Using the Instant Restore utility when the operating system is not functioning .... 82
Using Windows Backup and Restore ......................................................................... 82
Using system restore points ....................................................................................... 83
When to create restore points .................................................................... 83
Creating a system restore point .................................................................. 83
Restoring to a previous date and time ......................................................... 83
Backing up and recovering using HP Recovery Manager ............................................. 84
Backing up your information ...................................................................... 84
Creating a set of recovery discs ................................................................. 85
Performing a recovery .............................................................................................. 86
Recovering using the recovery discs ............................................................
Recovering using the partition on the hard drive (select models only) ..............
Windows XP .........................................................................................................................
Backing up your information .....................................................................................
Creating a copy of the hard drive ..............................................................
Performing a recovery ...............................................................................
86
86
87
87
88
88
Using the Disaster Recovery Utility ..............................................................
Downloading and extracting the Disaster Recovery utility ...............
Restoring your hard drive image .................................................
Using the Instant Restore utility ...................................................................
Using the Instant Restore utility when the operating system is
functioning ...............................................................................
Using the Instant Restore utility when the operating system is not
functioning ...............................................................................
89
89
89
90
90
90
7 Connector pin assignments ............................................................................................. 91
Audio-in (microphone) ............................................................................................................ 91
Audio-out (headphone) ........................................................................................................... 91
External monitor ..................................................................................................................... 92
RJ-45 (network) ...................................................................................................................... 93
Universal Serial Bus ................................................................................................................ 93
8 Power cord set requirements .......................................................................................... 94
Requirements for all countries .................................................................................................. 94
Requirements for specific countries and regions ......................................................................... 95
9 Recycling ........................................................................................................................ 96
Battery .................................................................................................................................. 96
Display ................................................................................................................................. 96
Index ............................................................................................................................... 102
ix
Downloaded from www.Manualslib.com manuals search engine
x
Downloaded from www.Manualslib.com manuals search engine
1
Product description
Category
Description
HP Mini 110
Product Name
HP Mini 110
√
√
Compaq Mini CQ10
Processor
Intel® Atom™ N475 1.83-GHz processor, 512-KB level
2 cache, 667-MHz front-side bus (FSB). 6.5W TDP
Compaq Mini
CQ10
√
√
Intel® Atom™ N470 1.83-GHz processor, 512-KB level
2 cache, 667-MHz front-side bus (FSB). 6.5W TDP
Intel® Atom™ N455 1.66-GHz processor, 512-KB level
2 cache, 667-MHz front-side bus (FSB).
Intel® Atom™ N450 1.66-GHz processor, 512-KB level
2 cache, 667-MHz front-side bus (FSB)
Intel Atom™ N450 1.66-GHz processor with 512-KB level 2
cache, 667-MHz FSB without WWAN module
Intel Atom™ N470 1.83-GHz processor with 512-KB level 2
cache, 667-MHz FSB, 6.5W TDP without WWAN module
Intel Atom™ N455 1.66-GHz processor with 512-KB level 2
cache, 667-MHz FSB without WWAN module
Intel Atom™ N475 1.83-GHz processor with 512-KB level 2
cache, 667-MHz FSB, 6.5 TDP without WWAN module
Chipset
Intel NM10 Express
√
√
Graphics
Intel Graphics Media Accelerator 3150 universal memory
architecture (UMA) graphics subsystem with Broadcom
Crystal HD Enhanced Video Accelerator hardware decoder
card
√
√
Panels
All display assemblies include 1 webcam, 1 microphone,
1 speaker box, and 2 wireless local-area network (WLAN)
antenna transceivers/cables; wireless wide-area network
(WWAN) is optional
√
√
Wide aspect 16:9 ratio panels, typical brightness: 200nits
√
√
10.1-inch high-definition (HD), AntiGlare, flush glass
(1024 × 600) LED
√
√
1
Downloaded from www.Manualslib.com manuals search engine
Category
Memory
Description
HP Mini 110
Compaq Mini
CQ10
10.1-inch standard-definition (SD), WSVGA, AntiGlare
(1024 × 600) LED
√
√
One customer-accessible/upgradable memory module slot
√
√
PC2-4200, 667-MHz, DDR2
√
√
Supports the following configurations:
√
√
√
√
●
2048-MB total system memory (2048 × 1)
NOTE: Supported on computers with Windows® XP
and Windows 7.
●
1024-MB total system memory (1024× 1)
NOTE:
7.
Hard drives
Supported only on computers with Windows
Supports the following 9.5-mm (0.37-in) × 6.35-cm
(2.50-inch), parallel SATA, 5400-rpm hard drives:
●
250-GB
NOTE:
7.
●
Supported only on computers with Windows
320–GB
NOTE:
7.
Supported only on computers with Windows
Optical drive
Supports external USB optical drives only
√
√
Diskette drive
Supports external USB diskette drives only
√
√
Audio/Visual
HD audio
√
√
Supports BEATS audio driver
√
√
Integrated 1.5-w speakers (2)
√
√
Fixed integrated, digital microphone
√
√
Fixed Integrated VGA webcam, 640 × 480 resolution, up to
30 frames per second
√
√
Modem
Supports external USB modems only
√
√
Ethernet
Integrated Realtek RTL8703EL 10/100 network interface
card (NIC)
√
√
Wireless
Integrated WLAN by way of:
√
√
√
√
●
Atheros 9285G 802.11b/g/n 1×1 WiFi Adapter
module
●
Broadcom 4312G 802.11b/g WiFi Adapter module
2 WLAN antennas built into display assembly
2
Chapter 1 Product description
Downloaded from www.Manualslib.com manuals search engine
Category
External media
cards
Internal media
cards
Ports
Keyboard/
pointing device
Description
HP Mini 110
Compaq Mini
CQ10
Integrated WWAN by way of HP un2400 Mobile
Broadband Module (optional)
√
√
Digital Media Slot (consumer models) or Media Card Reader
(commercial models) with push-push technology supporting:
√
√
√
√
Audio-in/out combo, supporting jack detection
√
√
RJ-45 (Ethernet, includes link and activity lights)
√
√
USB (2–3)
√
√
VGA, supporting up to 1600 x 900 external resolution @
60Hz, hot plug /unplug, and auto detection for correct
output to wide-aspect vs. standard aspect video
√
√
3-pin AC power
√
√
93% flat-style keyboard
√
√
HP Clikpad TouchPad with multi-touch/gesture support
√
√
30-W UMA AC adapter (non-Smart) with localized cable
plug support and stepped plug
√
√
AC adapter connector on cable
√
√
1.0-m (3.28-ft) power cord
√
√
3-cell Lithium-ion(Li-ion) battery (2.55-Ah, 28-Wh)
√
√
6-cell Lithium-ion(Li-ion) battery (2.80-Ah, 62-Wh)
√
√
Supports Kensington security lock
√
√
●
Memory Stick (MS)
●
MS/Pro
●
MultiMediaCard (MMC)
●
Secure Digital High Capacity (SDHC) Memory Card
(standard and large size)
●
xD-Picture
Two Mini Card slots:
●
Full-size Mini Card slot
●
Half-size Mini Card slot
No numeric pad supported.
TouchPad with 2 TouchPad buttons and 2-way scrolling (taps
enabled and some gestures enabled by default)
TouchPad on/off button with LED indicator
Power
requirements
Security
3
Downloaded from www.Manualslib.com manuals search engine
Category
Description
HP Mini 110
Operating
system
Windows 7 Home Basic 32
√
Windows 7 Starter 32
√
√
Windows XP Home SP3, ultra low-cost personal computer
(ULCPC) edition
√
√
Support for HP QuickWeb
√
√
FreeDOS
√
Serviceability
4
Compaq Mini
CQ10
End-user replaceable parts:
AC adapter
√
√
Battery (system)
√
√
Hard drive
√
√
Memory module
√
√
WLAN module
√
√
WWAN module
√
√
Chapter 1 Product description
Downloaded from www.Manualslib.com manuals search engine
2
External component identification
Identifying the hardware
Components included with the computer may vary by region and model. The illustrations in this chapter
identify the standard features on most computer models.
To see a list of hardware installed in the computer in Windows, follow these steps:
1.
Select Start > My Computer.
2.
In the left pane of the System Tasks window, select View system information.
3.
Select Hardware tab > Device Manager.
You can also add hardware or modify computer configurations using Device Manager.
Identifying the hardware
Downloaded from www.Manualslib.com manuals search engine
5
Top components
TouchPad
6
Item
Component
Description
(1)
TouchPad zone
Moves the pointer and selects or activates items on the
screen.
(2)
Left TouchPad button*
Functions like the left button on an external mouse.
(3)
Right TouchPad button*
Functions like the right button on an external mouse.
Chapter 2 External component identification
Downloaded from www.Manualslib.com manuals search engine
Lights
Item
Component
Description
(1)
Caps lock light
On: Caps lock is on.
(2)
Mute light
On: Speaker sound is off.
(3)
Wireless light
●
White: An integrated wireless device, such as a
wireless local area network (WLAN) device and/ or
a Bluetooth device, is on.
NOTE: Wireless devices are enabled at the
factory.
●
Off: All wireless devices are off.
Top components
Downloaded from www.Manualslib.com manuals search engine
7
Keys
Item
Component
Description
(1)
esc key
Displays system information when pressed in combination
with the fn key.
(2)
fn key
Executes frequently used system functions when pressed
in combination with a function key or the esc key.
(3)
Windows logo key
Displays the Windows Start menu on computers using the
Windows operating system.
(4)
Windows applications key
Displays a shortcut menu for items beneath the pointer.
(5)
Arrow keys
Scroll the page up or down, or when pressed in
combination with the fn key, move to the beginning or
end of the document.
(6)
Action keys
Execute frequently used system functions.
Front components
8
Chapter 2 External component identification
Downloaded from www.Manualslib.com manuals search engine
Item
Component
Description
(1)
Vents (2)
Enable airflow to cool internal components.
NOTE: The computer fan starts up automatically to
cool internal components and prevent overheating. It
is normal for the internal fan to cycle on and off
during routine operation.
(2)
Speaker
Produces sound.
Front components
Downloaded from www.Manualslib.com manuals search engine
9
Right-side components
item
Component
Description
(1)
Digital Media Slot
Supports the following optional digital card formats:
(2)
(3)
Power light
Power switch
●
MultiMediaCard (MMC)
●
Secure Digital (SD) Memory Card
●
Secure Digital Extended Capacity (SDxC) Memory
Card
●
Secure Digital High Capacity (SDHC) Memory Card
●
White: The computer is on.
●
Blinking white: The computer is in the Sleep state.
●
Off: The computer is off or in Hibernation.
●
When the computer is off, slide the switch to turn on
the computer.
●
When the computer is on, briefly slide the switch to
initiate Sleep.
●
When the computer is in the Sleep state, briefly
slide the switch to exit Sleep.
●
When the computer is in Hibernation, slide the
switch briefly to exit Hibernation.
If the computer has stopped responding and Windows®
shutdown procedures are ineffective, slide and hold the
power switch for at least 4 seconds to turn off the
computer.
To learn more about your power settings in Windows,
select Start > Control Panel > System and
Security > Power Options, or refer to the HP
Notebook Reference Guide.
(4)
10
USB ports (2)
Chapter 2 External component identification
Downloaded from www.Manualslib.com manuals search engine
Connect optional USB devices.
item
Component
Description
(5)
RJ-45 (network) jack and cover
Connects a network cable.
(6)
Security cable slot
Attaches an optional security cable to the computer.
NOTE: The security cable is designed to act as a
deterrent, but it may not prevent the computer from being
mishandled or stolen.
Left-side components
item
Component
Description
(1)
Power connector
Connects an AC adapter.
(2)
AC adaptor light
●
White: The computer is connected to external power
and the battery is fully charged.
●
Amber: The computer is connected to external
power and the battery is charging.
●
Off: The computer is not connected to external
power.
(3)
External monitor port
Connects an external VGA monitor or projector.
(4)
Vent
Enables airflow to cool internal components.
NOTE: The computer fan starts up automatically to
cool internal components and prevent overheating. It is
normal for the internal fan to cycle on and off during
routine operation.
(5)
Drive light
Blinking white: The hard drive is being accessed.
(6)
USB port
Connects an optional USB device.
(7)
Audio-out (headphone) jack/Audio-in (microphone) jack
Connects optional powered stereo speakers,
headphones, earbuds, a headset, or television audio.
Also connects an optional headset microphone.
WARNING! When a device is connected to the jack,
the computer speakers are disabled.
NOTE: When a device is connected to the jack, the
computer speakers are disabled.
Left-side components
Downloaded from www.Manualslib.com manuals search engine
11
Display components
item
Component
Description
(1)
WWAN antennas* (2) (select models only)
Send and receive wireless signals to communicate with
wireless wide-area networks (WWAN).
(2)
WLAN antennas (2)*
Send and receive wireless signals to communicate with
wireless local area networks (WLAN).
(3)
Webcam light
On: The webcam is in use.
(4)
Webcam
Records video and captures still photographs.
To use the webcam in Windows, select Start > HP >
HP MediaSmart > HP MediaSmart Webcam.
(5)
Internal microphone
Records sound.
*The antennas are not visible from the outside of the computer. For optimal transmission, keep the area immediately around the
antennas free from obstructions. To see wireless regulatory notices, refer to the section of the Regulatory, Safety, and
Environmental Notices that applies to your country or region. These notices are located in Help and Support.
12
Chapter 2 External component identification
Downloaded from www.Manualslib.com manuals search engine
Bottom components
item
Component
Description
(1)
Battery release latches (2)
Release the battery from the battery bay.
(2)
Battery bay
Holds the battery.
Bottom components
Downloaded from www.Manualslib.com manuals search engine
13
3
Illustrated parts catalog
Service tag
When ordering parts or requesting information, provide the computer serial number and model
description provided on the service tag:
NOTE: The computer battery must be removed to access the service tag.
(1) Product name: This is the product name affixed to the front of the device.
(2) Serial number (s/n): This is an alphanumeric identifier that is unique to each product.
(3) Part number/Product number (p/n): This number provides specific information about the product's
hardware components. The part number helps a service technician to determine what components and
parts are needed.
(4) Warranty period: This number describes the duration of the warranty period for the device.
(5) Model description (select models only): This is the alphanumeric identifier used to locate documents,
drivers, and support for the device.
14
Chapter 3 Illustrated parts catalog
Downloaded from www.Manualslib.com manuals search engine
Computer major components
Computer major components
Downloaded from www.Manualslib.com manuals search engine
15
Item
Description
(1)
10.1-in display assembly (includes display panel cable, 2 WLAN transceivers and cables, 2 WWAN
transceivers and cables, and webcam/microphone module and cable):
(2)
Spare part number
●
10.1-in, WSVGA, AntiGlare, standard display assembly in black
607744-001
●
10.1-in, WSVGA, AntiGlare, standard display assembly in white
607745-001
●
10.1-in, WSVGA, standard display assembly in black
619469-001
●
10.1-in, WSVGA, standard display assembly in black
619470-001
●
10.1-in, WSVGA, Anti-Glare, standard display assembly in black
607746-001
●
10.1-in, WSVGA, Anti-Glare, standard display assembly in black
618875-001
●
10.1-in, WSVGA, AntiGlare display panel non-PMMA in red
622656-001
●
10.1-in, WSVGA, AntiGlare display panel non-PMMA in blue
622657-001
●
10.1-in, WSVGA, AntiGlare display panel non-PMMA with WWAN, in blue
622659-001
●
10.1-in, WSVGA, AntiGlare display panel non-PMMA with WWAN, in red
622658-001
Keyboard (includes cable)
With textured surface:
16
●
For use in Japan
608769-291
●
For use in Taiwan
608769-AB1
●
For use in South Korea
608769-AD1
●
For use in Thailand
608769-281
●
For use in Slovenia
608769-BA1
●
For use in the Czech Republic
608769-221
●
For use in Turkey
608769-141
●
For use in Hungary
608769-211
●
For use in Switzerland
608769-BG1
●
For use in Russia
608769-251
●
For use in Israel
608769-BB1
●
For use in Greece
608769-DJ1
●
For use in Belgium
608769-A41
●
For use in Saudi Arabia
608769-171
●
For use in Portugal
608769-131
●
For use in Denmark, Finland, and Norway
608769-DH1
●
For use in Spain
608769-071
●
For use in Italy
608769-061
●
For use in France
608769-051
Chapter 3 Illustrated parts catalog
Downloaded from www.Manualslib.com manuals search engine
Item
(3)
Description
Spare part number
●
For use in Germany
608769-041
●
For use in the United Kingdom
608769-031
●
For use in the Netherlands
608769-B31
●
For use in Latin America
608769-161
●
For use in French Canada
608769-121
●
For use in the United States
608769-001
●
For use in Brazil
608769-201
Top cover:
●
For HP and CPQ
607766-001
(4)
Speakers (includes cable)
608770-001
(5) &
(6)
TouchPad (includes cable and bracket (6)):
●
(7)
For HP and CPQ
607766-001
System board :
Intel Atom™ N450 1.66-GHz processor with 512-KB level 2 cache, 667-MHz FSB
607740-001
Intel Atom™ N470 1.83-GHz processor with 512-KB level 2 cache, 667-MHz FSB, 6.5W
TDP
607741-001
Intel Atom™ N455 1.66-GHz processor with 512-KB level 2 cache, 667-MHz FSB
618873-001
Intel Atom™ N475 1.83-GHz processor with 512-KB level 2 cache, 667-MHz FSB, 6.5 TDP
618874-001
Intel Atom™ N450 1.66-GHz processor with 512-KB level 2 cache, 667-MHz FSB without
WWAN module
621300-001
Intel Atom™ N470 1.83-GHz processor with 512-KB level 2 cache, 667-MHz FSB, 6.5W
TDP without WWAN module
621301-001
Intel Atom™ N455 1.66-GHz processor with 512-KB level 2 cache, 667-MHz FSB without
WWAN module
621302-001
Intel Atom™ N475 1.83-GHz processor with 512-KB level 2 cache, 667-MHz FSB, 6.5 TDP
without WWAN module
621303-001
(8)
Fan/heat sink assembly (includes replacement thermal material)
608772-001
(9)
RTC battery
608771-001
(10)
Power connector cable
607755-001
(11)
Base enclosure (includes 4 rubber feet and power connector bracket)
607765-001
Rubber Kit (not illustrated, includes 4 rubber feet and RJ-45 cover)
607756-001
(12)
Battery
3-cell, 27-WHr (includes 2 release latches)
607762-001
6-cell, 55-WHr (includes 2 release latches and 2 rubber feet)
607763-001
Computer major components
Downloaded from www.Manualslib.com manuals search engine
17
Item
Description
(13)
Memory module (667-MHz, DDR2):
1024-MB
616749-001
2048-MB
616750-001
(14)
Memory shield (included with the service cover kit)
607768-001
(15)
HP Mobile Broadband WWAN modules
(16)
18
Spare part number
HP un2400 Mobile Broadband WWAN module
531993-001
HP Mobile Broadband WWAN module
592625-161
HP Mobile Broadband WWAN module
607212-001
HP F3307 Pris 850 Mobile Broadband WWAN module
612599-001
HP F3307 Pris 900 Mobile Broadband WWAN module
612600-001
WLAN modules
●
For use in Canada, the Cayman Islands, Guam, Puerto Rico, the U.S. Virgin Islands,
and the United States
607742–001
●
For use in Afghanistan, Albania, Algeria, Andorra, Angola, Antigua and Barbuda,
Argentina, Armenia, Aruba, Australia, Austria, Azerbaijan, the Bahamas, Bahrain,
Bangladesh, Barbados, Belarus, Belgium, Belize, Benin, Bermuda, Bhutan, Bolivia,
Bosnia and Herzegovina, Botswana, Brazil, the British Virgin Islands, Brunei, Bulgaria,
Burkina Faso, Burundi, Cameroon, Cape Verde, the Central African Republic, Chad,
Chile, the People's Republic of China, Colombia, Comoros, the Congo, Costa Rica,
Croatia, Cyprus, the Czech Republic, Denmark, Djibouti, Dominica,
the Dominican Republic, East Timor, Ecuador, Egypt, El Salvador, Equatorial Guinea,
Eritrea, Estonia, Ethiopia, Fiji, Finland, France, French Guiana, Gabon, Gambia,
Georgia, Germany, Ghana, Gibraltar, Greece, Grenada, Guadeloupe, Guatemala,
Guinea, Guinea-Bissau, Guyana, Haiti, Honduras, Hong Kong, Hungary, Iceland,
India, Ireland, Israel, Italy, the Ivory Coast, Jamaica, Jordan, Kazakhstan, Kenya,
Kiribati, Kyrgyzstan, Laos, Latvia, Lebanon, Lesotho, Liberia, Liechtenstein, Lithuania,
Luxembourg, Macedonia, Madagascar, Malawi, Malaysia, the Maldives, Mali, Malta,
the Marshall Islands, Martinique, Mauritania, Mauritius, Mexico, Micronesia, Monaco,
Mongolia, Montenegro, Morocco, Mozambique, Namibia, Nauru, Nepal,
the Nether Antilles, the Netherlands, New Zealand, Nicaragua, Niger, Nigeria,
Norway, Oman, Pakistan, Palau, Panama, Papua New Guinea, Paraguay, Peru,
the Philippines, Poland, Portugal, the Republic of Moldova, Romania, Russia, Rwanda,
Samoa, San Marino, Sao Tome and Principe, Saudi Arabia, Senegal, Serbia,
the Seychelles, Sierra Leone, Singapore, Slovakia, Slovenia, the Solomon Islands,
Somalia, South Africa, South Korea, Spain, Sri Lanka, St. Kitts and Nevis, St. Lucia,
St. Vincent and the Grenadines, Suriname, Swaziland, Sweden, Switzerland, Taiwan,
Tajikistan, Tanzania, Togo, Tonga, Trinidad and Tobago, Tunisia, Turkey,
Turkmenistan, Tuvalu, Uganda, Ukraine, the United Arab Emirates,
the United Kingdom, Uruguay, Uzbekistan, Vanuatu, Venezuela, Vietnam, Yemen,
Zaire, Zambia, and Zimbabwe
617551–001
Chapter 3 Illustrated parts catalog
Downloaded from www.Manualslib.com manuals search engine
Item
Description
Spare part number
●
For use in Afghanistan, Albania, Algeria, Andorra, Angola, Antigua and Barbuda,
Argentina, Armenia, Aruba, Australia, Austria, Azerbaijan, the Bahamas, Bahrain,
Bangladesh, Barbados, Belarus, Belgium, Belize, Benin, Bermuda, Bhutan, Bolivia,
Bosnia and Herzegovina, Botswana, Brazil, the British Virgin Islands, Brunei, Bulgaria,
Burkina Faso, Burundi, Cameroon, Cape Verde, the Central African Republic, Chad,
Chile, the People's Republic of China, Colombia, Comoros, the Congo, Costa Rica,
Croatia, Cyprus, the Czech Republic, Denmark, Djibouti, Dominica,
the Dominican Republic, East Timor, Ecuador, Egypt, El Salvador, Equatorial Guinea,
Eritrea, Estonia, Ethiopia, Fiji, Finland, France, French Guiana, Gabon, Gambia,
Georgia, Germany, Ghana, Gibraltar, Greece, Grenada, Guadeloupe, Guatemala,
Guinea, Guinea-Bissau, Guyana, Haiti, Honduras, Hong Kong, Hungary, Iceland,
India, Ireland, Israel, Italy, the Ivory Coast, Jamaica, Jordan, Kazakhstan, Kenya,
Kiribati, Kyrgyzstan, Laos, Latvia, Lebanon, Lesotho, Liberia, Liechtenstein, Lithuania,
Luxembourg, Macedonia, Madagascar, Malawi, Malaysia, the Maldives, Mali, Malta,
the Marshall Islands, Martinique, Mauritania, Mauritius, Mexico, Micronesia, Monaco,
Mongolia, Montenegro, Morocco, Mozambique, Namibia, Nauru, Nepal,
the Nether Antilles, the Netherlands, New Zealand, Nicaragua, Niger, Nigeria,
Norway, Oman, Pakistan, Palau, Panama, Papua New Guinea, Paraguay, Peru,
the Philippines, Poland, Portugal, the Republic of Moldova, Romania, Russia, Rwanda,
Samoa, San Marino, Sao Tome and Principe, Saudi Arabia, Senegal, Serbia,
the Seychelles, Sierra Leone, Singapore, Slovakia, Slovenia, the Solomon Islands,
Somalia, South Africa, South Korea, Spain, Sri Lanka, St. Kitts and Nevis, St. Lucia,
St. Vincent and the Grenadines, Suriname, Swaziland, Sweden, Switzerland, Taiwan,
Tajikistan, Tanzania, Togo, Tonga, Trinidad and Tobago, Tunisia, Turkey,
Turkmenistan, Tuvalu, Uganda, Ukraine, the United Arab Emirates,
the United Kingdom, Uruguay, Uzbekistan, Vanuatu, Venezuela, Vietnam, Yemen,
Zaire, Zambia, and Zimbabwe
593836-001
●
For use in Afghanistan, Albania, Algeria, Andorra, Angola, Antigua and Barbuda,
Argentina, Armenia, Aruba, Australia, Austria, Azerbaijan, the Bahamas, Bahrain,
Bangladesh, Barbados, Belarus, Belgium, Belize, Benin, Bermuda, Bhutan, Bolivia,
Bosnia and Herzegovina, Botswana, Brazil, the British Virgin Islands, Brunei, Bulgaria,
Burkina Faso, Burundi, Cameroon, Cape Verde, the Central African Republic, Chad,
Chile, the People's Republic of China, Colombia, Comoros, the Congo, Costa Rica,
Croatia, Cyprus, the Czech Republic, Denmark, Djibouti, Dominica,
the Dominican Republic, East Timor, Ecuador, Egypt, El Salvador, Equatorial Guinea,
Eritrea, Estonia, Ethiopia, Fiji, Finland, France, French Guiana, Gabon, Gambia,
Georgia, Germany, Ghana, Gibraltar, Greece, Grenada, Guadeloupe, Guatemala,
Guinea, Guinea-Bissau, Guyana, Haiti, Honduras, Hong Kong, Hungary, Iceland,
India, Ireland, Israel, Italy, the Ivory Coast, Jamaica, Jordan, Kazakhstan, Kenya,
Kiribati, Kyrgyzstan, Laos, Latvia, Lebanon, Lesotho, Liberia, Liechtenstein, Lithuania,
Luxembourg, Macedonia, Madagascar, Malawi, Malaysia, the Maldives, Mali, Malta,
the Marshall Islands, Martinique, Mauritania, Mauritius, Mexico, Micronesia, Monaco,
Mongolia, Montenegro, Morocco, Mozambique, Namibia, Nauru, Nepal,
the Nether Antilles, the Netherlands, New Zealand, Nicaragua, Niger, Nigeria,
Norway, Oman, Pakistan, Palau, Panama, Papua New Guinea, Paraguay, Peru,
the Philippines, Poland, Portugal, the Republic of Moldova, Romania, Russia, Rwanda,
Samoa, San Marino, Sao Tome and Principe, Saudi Arabia, Senegal, Serbia,
the Seychelles, Sierra Leone, Singapore, Slovakia, Slovenia, the Solomon Islands,
Somalia, South Africa, South Korea, Spain, Sri Lanka, St. Kitts and Nevis, St. Lucia,
St. Vincent and the Grenadines, Suriname, Swaziland, Sweden, Switzerland, Taiwan,
Tajikistan, Tanzania, Togo, Tonga, Trinidad and Tobago, Tunisia, Turkey,
Turkmenistan, Tuvalu, Uganda, Ukraine, the United Arab Emirates,
the United Kingdom, Uruguay, Uzbekistan, Vanuatu, Venezuela, Vietnam, Yemen,
Zaire, Zambia, and Zimbabwe
600370-001
Computer major components
Downloaded from www.Manualslib.com manuals search engine
19
Item
(17)
20
Description
Spare part number
●
For use in Afghanistan, Albania, Algeria, Andorra, Angola, Antigua and Barbuda,
Argentina, Armenia, Aruba, Australia, Austria, Azerbaijan, the Bahamas, Bahrain,
Bangladesh, Barbados, Belarus, Belgium, Belize, Benin, Bermuda, Bhutan, Bolivia,
Bosnia and Herzegovina, Botswana, Brazil, the British Virgin Islands, Brunei, Bulgaria,
Burkina Faso, Burundi, Cameroon, Cape Verde, the Central African Republic, Chad,
Chile, the People's Republic of China, Colombia, Comoros, the Congo, Costa Rica,
Croatia, Cyprus, the Czech Republic, Denmark, Djibouti, Dominica,
the Dominican Republic, East Timor, Ecuador, Egypt, El Salvador, Equatorial Guinea,
Eritrea, Estonia, Ethiopia, Fiji, Finland, France, French Guiana, Gabon, Gambia,
Georgia, Germany, Ghana, Gibraltar, Greece, Grenada, Guadeloupe, Guatemala,
Guinea, Guinea-Bissau, Guyana, Haiti, Honduras, Hong Kong, Hungary, Iceland,
India, Ireland, Israel, Italy, the Ivory Coast, Jamaica, Jordan, Kazakhstan, Kenya,
Kiribati, Kyrgyzstan, Laos, Latvia, Lebanon, Lesotho, Liberia, Liechtenstein, Lithuania,
Luxembourg, Macedonia, Madagascar, Malawi, Malaysia, the Maldives, Mali, Malta,
the Marshall Islands, Martinique, Mauritania, Mauritius, Mexico, Micronesia, Monaco,
Mongolia, Montenegro, Morocco, Mozambique, Namibia, Nauru, Nepal,
the Nether Antilles, the Netherlands, New Zealand, Nicaragua, Niger, Nigeria,
Norway, Oman, Pakistan, Palau, Panama, Papua New Guinea, Paraguay, Peru,
the Philippines, Poland, Portugal, the Republic of Moldova, Romania, Russia, Rwanda,
Samoa, San Marino, Sao Tome and Principe, Saudi Arabia, Senegal, Serbia,
the Seychelles, Sierra Leone, Singapore, Slovakia, Slovenia, the Solomon Islands,
Somalia, South Africa, South Korea, Spain, Sri Lanka, St. Kitts and Nevis, St. Lucia,
St. Vincent and the Grenadines, Suriname, Swaziland, Sweden, Switzerland, Taiwan,
Tajikistan, Tanzania, Togo, Tonga, Trinidad and Tobago, Tunisia, Turkey,
Turkmenistan, Tuvalu, Uganda, Ukraine, the United Arab Emirates,
the United Kingdom, Uruguay, Uzbekistan, Vanuatu, Venezuela, Vietnam, Yemen,
Zaire, Zambia, and Zimbabwe
602992-001
●
For use in Afghanistan, Albania, Algeria, Andorra, Angola, Antigua and Barbuda,
Argentina, Armenia, Aruba, Australia, Austria, Azerbaijan, the Bahamas, Bahrain,
Bangladesh, Barbados, Belarus, Belgium, Belize, Benin, Bermuda, Bhutan, Bolivia,
Bosnia and Herzegovina, Botswana, Brazil, the British Virgin Islands, Brunei, Bulgaria,
Burkina Faso, Burundi, Cameroon, Cape Verde, the Central African Republic, Chad,
Chile, the People's Republic of China, Colombia, Comoros, the Congo, Costa Rica,
Croatia, Cyprus, the Czech Republic, Denmark, Djibouti, Dominica,
the Dominican Republic, East Timor, Ecuador, Egypt, El Salvador, Equatorial Guinea,
Eritrea, Estonia, Ethiopia, Fiji, Finland, France, French Guiana, Gabon, Gambia,
Georgia, Germany, Ghana, Gibraltar, Greece, Grenada, Guadeloupe, Guatemala,
Guinea, Guinea-Bissau, Guyana, Haiti, Honduras, Hong Kong, Hungary, Iceland,
India, Ireland, Israel, Italy, the Ivory Coast, Jamaica, Jordan, Kazakhstan, Kenya,
Kiribati, Kyrgyzstan, Laos, Latvia, Lebanon, Lesotho, Liberia, Liechtenstein, Lithuania,
Luxembourg, Macedonia, Madagascar, Malawi, Malaysia, the Maldives, Mali, Malta,
the Marshall Islands, Martinique, Mauritania, Mauritius, Mexico, Micronesia, Monaco,
Mongolia, Montenegro, Morocco, Mozambique, Namibia, Nauru, Nepal,
the Nether Antilles, the Netherlands, New Zealand, Nicaragua, Niger, Nigeria,
Norway, Oman, Pakistan, Palau, Panama, Papua New Guinea, Paraguay, Peru,
the Philippines, Poland, Portugal, the Republic of Moldova, Romania, Russia, Rwanda,
Samoa, San Marino, Sao Tome and Principe, Saudi Arabia, Senegal, Serbia,
the Seychelles, Sierra Leone, Singapore, Slovakia, Slovenia, the Solomon Islands,
Somalia, South Africa, South Korea, Spain, Sri Lanka, St. Kitts and Nevis, St. Lucia,
St. Vincent and the Grenadines, Suriname, Swaziland, Sweden, Switzerland, Taiwan,
Tajikistan, Tanzania, Togo, Tonga, Trinidad and Tobago, Tunisia, Turkey,
Turkmenistan, Tuvalu, Uganda, Ukraine, the United Arab Emirates,
the United Kingdom, Uruguay, Uzbekistan, Vanuatu, Venezuela, Vietnam, Yemen,
Zaire, Zambia, and Zimbabwe
605560-005
Hard drive (includes cable adapter, 4 rubber isolators, and hard drive bracket)
Chapter 3 Illustrated parts catalog
Downloaded from www.Manualslib.com manuals search engine
Item
Description
Spare part number
Hard drive:
(18)
●
250-GB, 5400-rpm
608763–001
●
320–GB, 5400–rpm
608764–001
Service cover
●
In Black
607750-001
●
In White
607751-001
●
In Black (for use only with Compaq Mini CQ10 computer models, hinge caps attached)
607753–001
●
In Red
622660–001
●
In Blue
622661–001
Computer major components
Downloaded from www.Manualslib.com manuals search engine
21
Display assembly components
NOTE: Display assembly subcomponents are available only for standard display assemblies. Flush
glass display assemblies are available only as hinge-up assemblies.
22
Item
Description
Spare part number
(1)
Display bezel (includes WLAN antenna transceivers and cables and WWAN antenna transceivers and cables):
For use only with HP Mini 110 computer models
607749-001
For use only with Compaq Mini CQ10 computer models
607752-001
(2)
Webcam/microphone module
607748-001
(3)
Display panel:
10.1-in, WSVGA, AntiGlare, standard display assembly in black
607744-001
10.1-in, WSVGA, AntiGlare, standard display assembly in white
607745-001
Chapter 3 Illustrated parts catalog
Downloaded from www.Manualslib.com manuals search engine
Item
Description
Spare part number
10.1-in, WSVGA, Anti-Glare, standard display assembly in black
607746-001
10.1-in, WSVGA, standard display assembly in black
619469-001
10.1-in, WSVGA, standard display assembly in white
619470-001
10.1-in, WSVGA, Anti-Glare, standard display assembly in black
618875-001
10.1-in, AntiGlare display panel non PMMA
607747-001
10.1-in, WSVGA, AntiGlare display panel non-PMMA with WWAN
620902-001
10.1-in, WSVGA, AntiGlare display panel non-PMMA in red
622656-001
10.1-in, WSVGA, AntiGlare display panel non-PMMA in blue
622657-001
10.1-in, WSVGA, AntiGlare display panel non-PMMA with WWAN, in blue
622659-001
10.1-in, WSVGA, AntiGlare display panel non-PMMA with WWAN, in red
622658-001
(4)
Display Hinge Kit (includes left and right display hinges)
609907-001
(5a)
Display panel cable (includes webcam/microphone module cable)
607755-001
(5b)
WWAN antenna cables (included in Display cable kit)
607755–001
(5c)
WLAN antenna cables (included in Display cable kit)
607755–001
(6)
Display enclosure (includes WLAN antenna transceivers and cables and WWAN antenna transceivers and
cables)
Display Screw Kit (not illustrated)
607754-001
Display assembly components
Downloaded from www.Manualslib.com manuals search engine
23
Mass storage devices
NOTE: Each hard drive spare part kit includes a cable adapter, bracket, and 4 isolators.
24
Item
Description
(1)
Hard drive:
Spare part number
250-GB, 5400-RPM
608763–001
320–GB, 5400–RPM
608764–001
Chapter 3 Illustrated parts catalog
Downloaded from www.Manualslib.com manuals search engine
Miscellaneous parts
Description
Spare part number
30-W UMA AC adapter
496813–001
Power cord:
For use in Argentina
490371-D01
For use in Australia
490371-011
For use in Brazil
490371-201
For use in Denmark
490371-081
For use in Europe, Middle East, and Africa
490371-021
For use in Israel
490371-BB1
For use in Italy
490371-061
For use in Japan
490371-291
For use in the People's Republic of China
490371-AA1
For use in Singapore and the United Kingdom
490371-031
For use in South Africa
490371-AR1
For use in South Korea
490371-AD1
For use in Switzerland
490371-111
For use in Taiwan
490371-AB1
For use in India
490371–D61
For use in North America
490371–001
Rubber Kit (includes 4 rubber feet and power connector bracket)
607756-001
Miscellaneous parts
Downloaded from www.Manualslib.com manuals search engine
25
Sequential part number listing
26
Spare part number
Description
490371–001
Power cord for use in North America
490371–011
Power cord for use in Australia
490371–021
Power cord for use in Europe, the Middle East, and Africa
490371–031
Power cord for use in Singapore and the United Kingdom
490371–061
Power cord for use in Italy
490371–081
Power cord for use in Denmark
490371–111
Power cord for use in Switzerland
490371–201
Power cord for use in Brazil
490371–291
Power cord for use in Japan
490371–AA1
Power cord for use in the People's Republic of China
490371–AB1
Power cord for use in Taiwan
490371–AD1
Power cord for use in South Korea
490371–AR1
Power cord for use in South Africa
490371–BB1
Power cord for use in Israel
490371–D01
Power cord for use in Argentia
490371–D61
Power cord for use in India
496813–001
30-W UMA AC adapter
531993-001
HP un2400 Mobile Broadband WWAN module
574248-001
HP F3607 SDG 850 Mobile Broadband WWAN module
592625-161
HP Telefonica Mobile Broadband WWAN module
593836-001
HP 802.11 b/g/n Shiraz WLAN module
597588–001
Optical Mobile Mouse
600370-001
HP 802.11 b/g/n + Bluetooth 2.1+ EDR Combo Adapter WLAN modle
602992-001
HP 802.11 b/g/n (1x1) + Bluetooth 2.1+ EDR Combo Adapter WLAN module
605560-005
HP 802.11 b/g/n WLAN module
607212-001
HP Rogers Mobile Broadband WWAN module
607740–001
System board with Digital Media Card Reader (includes Intel Atom™ N450 1.66-GHz processor
with 512-KB level 2 cache, 667-MHz FSB):
607741–001
System board with Digital Media Card Reader (includes Intel Atom™ N470 1.83-GHz processor
with 512-KB level 2 cache, 667-MHz FSB):
607742–001
Atheros 9285G 802.11b/g/n 1×1 WiFi Adapter module:
607744–001
10.1-in, WSVGA, AntiGlare, standard display assembly in black
Chapter 3 Illustrated parts catalog
Downloaded from www.Manualslib.com manuals search engine
Spare part number
Description
607745–001
10.1-in, WSVGA, AntiGlare, standard display assembly in white
607746–001
10.1-in, WSVGA, AntiGlare, standard display assembly in black (IMR)
607747–001
10.1-in, AntiGlare display panel non PMMA
607748–001
Webcam/microphone module
607749–001
Display bezel for use with HP models (includes WLAN antenna transceivers and cables and
WWAN antenna transceivers and cables):
607750–001
Service cover (black)
607751–001
Service cover (white)
607752–001
Display bezel for use with CPQ models (includes WLAN antenna transceivers and cables and
WWAN antenna transceivers and cables):
607753–001
For use only with Compaq Mini CQ10 computer models (black, hinge caps attached)
607754–001
Display Screw Kit
607755–001
Power connector cable (part of the cable kit that includes display panel cable, webcam/microphone
module cable)
607756–001
Rubber Kit (includes 4 rubber feet and RJ-45 cover)
607762–001
3-cell, 27-WHr (includes 2 release latches)
607763–001
6-cell, 55-WHr (includes 2 release latches and 2 rubber feet)
607765–001
Base enclosure (includes 4 rubber feet and power connector bracket)
607766–001
Top cover (for HP and CPQ)
607768–001
Service cover (kit includes memory shield)
608763–001
Hard drive: 250-GB, 5400-rpm
608764-001
Hard drive: 320–GB, 5400–rpm
608769–001
Keyboard with textured finish for use only in the United States (includes cable)
608769–031
Keyboard with textured finish for use only in the United Kingdom (includes cable)
608769–041
Keyboard with textured finish for use only in Germany (includes cable)
608769–051
Keyboard with textured finish for use only in France (includes cable)
608769–061
Keyboard with textured finish for use only in Italy (includes cable)
608769–071
Keyboard with textured finish for use only in Spain (includes cable)
608769–121
Keyboard with textured finish for use only in French Canada (includes cable)
608769–131
Keyboard with textured finish for use only in Portugal (includes cable)
608769–141
Keyboard with textured finish for use only in Turkey (includes cable)
608769–161
Keyboard with textured finish for use only in Latin America (includes cable)
608769–171
Keyboard with textured finish for use only in Saudi Arabia (includes cable)
608769–201
Keyboard with textured finish for use only in Brazil (includes cable)
Sequential part number listing
Downloaded from www.Manualslib.com manuals search engine
27
28
Spare part number
Description
608769–211
Keyboard with textured finish for use only in Hungary (includes cable)
608769–221
Keyboard with textured finish for use only in the Czech Republic (includes cable)
608769–251
Keyboard with textured finish for use only in Russia (includes cable)
608769–281
Keyboard with textured finish for use only in Thailand (includes cable)
608769–291
Keyboard with textured finish for use only in Japan (includes cable)
608769–A41
Keyboard with textured finish for use only in Belgium (includes cable)
608769–AB1
Keyboard with textured finish for use only in Taiwan (includes cable)
608769–AD1
Keyboard with textured finish for use only in South Korea (includes cable)
608769–B31
Keyboard with textured finish for use only in the Netherlands (includes cable)
608769–BA1
Keyboard with textured finish for use only in Slovenia (includes cable)
608769–BB1
Keyboard with textured finish for use only in Israel (includes cable)
608769–BG1
Keyboard with textured finish for use only in Switzerland (includes cable)
608769–DH1
Keyboard with textured finish for use only in Denmark, Finland, and Norway (includes cable)
608769–DJ1
Keyboard with textured finish for use only in Greece (includes cable)
608770–001
Speakers (includes cable)
608771–001
RTC battery
608772–001
Fan/heat sink assembly (includes replacement thermal material)
609907–001
Display Hinge Kit (includes left and right display hinges)
612599-001
HP F3307 Pris 850 Mobile Broadband WWAN module
612600-001
HP F3307 Pris 900 Mobile Broadband WWAN module
616749–001
Memory module: 1024–MB (667-MHz, DDR2):
616750–001
Memory module: 2048–MB (667-MHz, DDR2):
Chapter 3 Illustrated parts catalog
Downloaded from www.Manualslib.com manuals search engine
Spare part number
Description
617551–001
Atheros 9285G 802.11b/g/n 1×1 WiFi Adapter module:
For use in Afghanistan, Albania, Algeria, Andorra, Angola, Antigua and Barbuda, Argentina,
Armenia, Aruba, Australia, Austria, Azerbaijan, the Bahamas, Bahrain, Bangladesh, Barbados,
Belarus, Belgium, Belize, Benin, Bermuda, Bhutan, Bolivia, Bosnia and Herzegovina, Botswana,
Brazil, the British Virgin Islands, Brunei, Bulgaria, Burkina Faso, Burundi, Cameroon, Cape Verde,
the Central African Republic, Chad, Chile, the People's Republic of China, Colombia, Comoros,
the Congo, Costa Rica, Croatia, Cyprus, the Czech Republic, Denmark, Djibouti, Dominica,
the Dominican Republic, East Timor, Ecuador, Egypt, El Salvador, Equatorial Guinea, Eritrea,
Estonia, Ethiopia, Fiji, Finland, France, French Guiana, Gabon, Gambia, Georgia, Germany,
Ghana, Gibraltar, Greece, Grenada, Guadeloupe, Guatemala, Guinea, Guinea-Bissau, Guyana,
Haiti, Honduras, Hong Kong, Hungary, Iceland, India, Ireland, Israel, Italy, the Ivory Coast,
Jamaica, Jordan, Kazakhstan, Kenya, Kiribati, Kyrgyzstan, Laos, Latvia, Lebanon, Lesotho, Liberia,
Liechtenstein, Lithuania, Luxembourg, Macedonia, Madagascar, Malawi, Malaysia, the Maldives,
Mali, Malta, the Marshall Islands, Martinique, Mauritania, Mauritius, Mexico, Micronesia, Monaco,
Mongolia, Montenegro, Morocco, Mozambique, Namibia, Nauru, Nepal, the Nether Antilles,
the Netherlands, New Zealand, Nicaragua, Niger, Nigeria, Norway, Oman, Pakistan, Palau,
Panama, Papua New Guinea, Paraguay, Peru, the Philippines, Poland, Portugal,
the Republic of Moldova, Romania, Russia, Rwanda, Samoa, San Marino, Sao Tome and Principe,
Saudi Arabia, Senegal, Serbia, the Seychelles, Sierra Leone, Singapore, Slovakia, Slovenia,
the Solomon Islands, Somalia, South Africa, South Korea, Spain, Sri Lanka, St. Kitts and Nevis,
St. Lucia, St. Vincent and the Grenadines, Suriname, Swaziland, Sweden, Switzerland, Taiwan,
Tajikistan, Tanzania, Togo, Tonga, Trinidad and Tobago, Tunisia, Turkey, Turkmenistan, Tuvalu,
Uganda, Ukraine, the United Arab Emirates, the United Kingdom, Uruguay, Uzbekistan, Vanuatu,
Venezuela, Vietnam, Yemen, Zaire, Zambia, and Zimbabwe
618873–001
Intel Atom™ N455 1.66-GHz processor with 512-KB level 2 cache, 667-MHz FSB
618874–001
Intel Atom™ N475 1.83-GHz processor with 512-KB level 2 cache, 667-MHz FSB, 6.5 TDP
618875–001
10.1-in, WSVGA, Anti-Glare, standard display assembly in black
619469–001
10.1-in, WSVGA, standard display assembly in black
619470–001
10.1-in, WSVGA, standard display assembly in black
620902–001
10.1-in, WSVGA, AntiGlare display panel non-PMMA with WWAN
621300-001
Intel Atom™ N450 1.66-GHz processor with 512-KB level 2 cache, 667-MHz FSB without WWAN
module
621301-001
Intel Atom™ N470 1.83-GHz processor with 512-KB level 2 cache, 667-MHz FSB, 6.5W TDP
without WWAN module
621302-001
Intel Atom™ N455 1.66-GHz processor with 512-KB level 2 cache, 667-MHz FSB without WWAN
module
621303-001
Intel Atom™ N475 1.83-GHz processor with 512-KB level 2 cache, 667-MHz FSB, 6.5 TDP without
WWAN module
622656-001
10.1-in, WSVGA, AntiGlare display panel non-PMMA in red
622657-001
10.1-in, WSVGA, AntiGlare display panel non-PMMA in blue
622658-001
10.1-in, WSVGA, AntiGlare display panel non-PMMA with WWAN, in red
622659-001
10.1-in, WSVGA, AntiGlare display panel non-PMMA with WWAN, in blue
622660–001
Service cover (red)
Sequential part number listing
Downloaded from www.Manualslib.com manuals search engine
29
30
Spare part number
Description
622661–001
Service cover (blue)
629234-001
Case sleeve
Chapter 3 Illustrated parts catalog
Downloaded from www.Manualslib.com manuals search engine
4
Removal and replacement
procedures
Preliminary replacement requirements
Tools required
You will need the following tools to complete the removal and replacement procedures:
●
Flat-bladed screwdriver
●
Magnetic screwdriver
●
Phillips P0 and P1 screwdrivers
Service considerations
The following sections include some of the considerations that you must keep in mind during
disassembly and assembly procedures.
NOTE: As you remove each subassembly from the device, place the subassembly (and all
accompanying screws) away from the work area to prevent damage.
Plastic parts
CAUTION: Using excessive force during disassembly and reassembly can damage plastic parts. Use
care when handling the plastic parts. Apply pressure only at the points designated in the maintenance
instructions.
Preliminary replacement requirements
Downloaded from www.Manualslib.com manuals search engine
31
Cables and connectors
CAUTION: When servicing the device, be sure that cables are placed in their proper locations
during the reassembly process. Improper cable placement can damage the device.
Cables must be handled with extreme care to avoid damage. Apply only the tension required to unseat
or seat the cables during removal and insertion. Handle cables by the connector whenever possible. In
all cases, avoid bending, twisting, or tearing cables. Be sure that cables are routed in such a way that
they cannot be caught or snagged by parts being removed or replaced. Handle flex cables with
extreme care; these cables tear easily.
Drive handling
CAUTION: Drives are fragile components that must be handled with care. To prevent damage to the
device, damage to a drive, or loss of information, observe these precautions:
Before removing or inserting a hard drive, shut down the device. If you are unsure whether the device
is off or in Hibernation, turn the device on, and then shut it down through the operating system.
Before handling a drive, be sure that you are discharged of static electricity. While handling a drive,
avoid touching the connector.
Handle drives on surfaces covered with at least one inch of shock-proof foam.
Avoid dropping drives from any height onto any surface.
After removing a hard drive, an optical drive, or a diskette drive, place it in a static-proof bag.
Avoid exposing a hard drive to products that have magnetic fields, such as monitors or speakers.
Avoid exposing a drive to temperature extremes or liquids.
If a drive must be mailed, place the drive in a bubble pack mailer or other suitable form of protective
packaging and label the package “FRAGILE.”
32
Chapter 4 Removal and replacement procedures
Downloaded from www.Manualslib.com manuals search engine
Grounding guidelines
Electrostatic discharge damage
Electronic components are sensitive to electrostatic discharge (ESD). Circuitry design and structure
determine the degree of sensitivity. Networks built into many integrated circuits provide some
protection, but in many cases, ESD contains enough power to alter device parameters or melt
silicon junctions.
A discharge of static electricity from a finger or other conductor can destroy static-sensitive devices or
microcircuitry. Even if the spark is neither felt nor heard, damage may have occurred.
An electronic device exposed to ESD may not be affected at all and can work perfectly throughout a
normal cycle. Or the device may function normally for a while, then degrade in the internal layers,
reducing its life expectancy.
CAUTION: To prevent damage to the device when you are removing or installing internal
components, observe these precautions:
Keep components in their electrostatic-safe containers until you are ready to install them.
Use nonmagnetic tools.
Before touching an electronic component, discharge static electricity by using the guidelines described
in this section.
Avoid touching pins, leads, and circuitry. Handle electronic components as little as possible.
If you remove a component, place it in an electrostatic-safe container.
The following table shows how humidity affects the electrostatic voltage levels generated by different
activities.
CAUTION: A product can be degraded by as little as 700 V.
Typical electrostatic voltage levels
Relative humidity
Event
10%
40%
55%
Walking across carpet
35,000 V
15,000 V
7,500 V
Walking across vinyl floor
12,000 V
5,000 V
3,000 V
Motions of bench worker
6,000 V
800 V
400 V
Removing DIPS from plastic tube
2,000 V
700 V
400 V
Removing DIPS from vinyl tray
11,500 V
4,000 V
2,000 V
Removing DIPS from Styrofoam
14,500 V
5,000 V
3,500 V
Removing bubble pack from PCB
26,500 V
20,000 V
7,000 V
Packing PCBs in foam-lined box
21,000 V
11,000 V
5,000 V
Preliminary replacement requirements
Downloaded from www.Manualslib.com manuals search engine
33
Packaging and transporting guidelines
Follow these grounding guidelines when packaging and transporting equipment:
●
To avoid hand contact, transport products in static-safe tubes, bags, or boxes.
●
Protect ESD-sensitive parts and assemblies with conductive or approved containers or packaging.
●
Keep ESD-sensitive parts in their containers until the parts arrive at static-free workstations.
●
Place items on a grounded surface before removing items from their containers.
●
Always be properly grounded when touching a component or assembly.
●
Store reusable ESD-sensitive parts from assemblies in protective packaging or nonconductive
foam.
●
Use transporters and conveyors made of antistatic belts and roller bushings. Be sure that
mechanized equipment used for moving materials is wired to ground and that proper materials
are selected to avoid static charging. When grounding is not possible, use an ionizer to dissipate
electric charges.
Workstation guidelines
Follow these grounding workstation guidelines:
34
●
Cover the workstation with approved static-shielding material.
●
Use a wrist strap connected to a properly grounded work surface and use properly grounded tools
and equipment.
●
Use conductive field service tools, such as cutters, screwdrivers, and vacuums.
●
When fixtures must directly contact dissipative surfaces, use fixtures made only of static-safe
materials.
●
Keep the work area free of nonconductive materials, such as ordinary plastic assembly aids and
Styrofoam.
●
Handle ESD-sensitive components, parts, and assemblies by the case or PCM laminate. Handle
these items only at static-free workstations.
●
Avoid contact with pins, leads, or circuitry.
●
Turn off power and input signals before inserting or removing connectors or test equipment.
Chapter 4 Removal and replacement procedures
Downloaded from www.Manualslib.com manuals search engine
Equipment guidelines
Grounding equipment must include either a wrist strap or a foot strap at a grounded workstation.
●
When seated, wear a wrist strap connected to a grounded system. Wrist straps are flexible straps
with a minimum of one megohm ±10% resistance in the ground cords. To provide proper ground,
wear a strap snugly against the skin at all times. On grounded mats with banana-plug connectors,
use alligator clips to connect a wrist strap.
●
When standing, use foot straps and a grounded floor mat. Foot straps (heel, toe, or boot straps)
can be used at standing workstations and are compatible with most types of shoes or boots. On
conductive floors or dissipative floor mats, use foot straps on both feet with a minimum of one
megohm resistance between the operator and ground. To be effective, the conductive strips must
be worn in contact with the skin.
The following grounding equipment is recommended to prevent electrostatic damage:
●
Antistatic tape
●
Antistatic smocks, aprons, and sleeve protectors
●
Conductive bins and other assembly or soldering aids
●
Nonconductive foam
●
Conductive tabletop workstations with ground cords of one megohm resistance
●
Static-dissipative tables or floor mats with hard ties to the ground
●
Field service kits
●
Static awareness labels
●
Material-handling packages
●
Nonconductive plastic bags, tubes, or boxes
●
Metal tote boxes
●
Electrostatic voltage levels and protective materials
The following table lists the shielding protection provided by antistatic bags and floor mats.
Material
Use
Voltage protection level
Antistatic plastic
Bags
1,500 V
Carbon-loaded plastic
Floor mats
7,500 V
Metallized laminate
Floor mats
5,000 V
Preliminary replacement requirements
Downloaded from www.Manualslib.com manuals search engine
35
Component replacement procedures
This chapter provides removal and replacement procedures.
There are as many as 33 screws, in 5 different sizes, that must be removed, replaced, or loosened
when servicing the computer. Make special note of each screw size and location during removal and
replacement.
Service tag
When ordering parts or requesting information, provide the computer serial number and model
description provided on the service tag:
NOTE: The computer battery must be removed to access the service tag.
(1) Product name: This is the product name affixed to the front of the device.
(2) Serial number (s/n): This is an alphanumeric identifier that is unique to each product.
(3) Model description: This is the alphanumeric identifier used to locate documents, drivers, and
support for the device.
(4) Warranty period: This number describes the duration of the warranty period for the device.
(5) Part number/Product number (p/n): This number provides specific information about the product's
hardware components. The part number helps a service technician to determine what components and
parts are needed.
36
Chapter 4 Removal and replacement procedures
Downloaded from www.Manualslib.com manuals search engine
Computer feet
The computer feet are adhesive-backed rubber pads. The feet are included in the Rubber Feet Kit, spare
part number 607756-001. There are 4 rubber feet that attach to the base enclosure in the locations
shown in the following illustration.
Component replacement procedures
Downloaded from www.Manualslib.com manuals search engine
37
Battery
Description
Spare part number
6-cell, 55-WHr (includes 2 release latches and 2 rubber feet)
607763-001
3-cell, 27-WHr (includes 2 release latches)
607762-001
Before disassembling the computer, follow these steps:
1.
Shut down the computer. If you are unsure whether the computer is off or in Hibernation, turn the
computer on, and then shut it down through the operating system.
2.
Disconnect all external devices connected to the computer.
3.
Disconnect the power from the computer by first unplugging the power cord from the AC outlet
and then unplugging the AC adapter from the computer.
Remove the battery:
1.
Turn the computer upside-down on a flat surface, with the battery bay toward you.
2.
Slide battery lock latch (1) to the unlock position.
3.
Then, firmly slide battery release latch (2) until the battery is released.
4.
Remove the battery (3).
Reverse this procedure to install a battery.
NOTE: After replacing the battery, slide the manual release latch to the lock position.
38
Chapter 4 Removal and replacement procedures
Downloaded from www.Manualslib.com manuals search engine
SIM
Before removing the SIM, follow these steps:
1.
Shut down the computer. If you are unsure whether the computer is off or in Hibernation, turn the
computer on, and then shut it down through the operating system.
2.
Disconnect all external devices connected to the computer.
3.
Disconnect the power from the computer by first unplugging the power cord from the AC outlet
and then unplugging the AC adapter from the computer.
4.
Remove the battery (see Battery on page 38).
Remove the SIM:
1.
Press in on the SIM (1) to release it from the SIM slot.
2.
Remove the SIM (2) from the SIM slot.
Install the SIM by inserting it into the SIM slot until you hear a click.
Component replacement procedures
Downloaded from www.Manualslib.com manuals search engine
39
Service cover
Description
Spare part number
Service cover
In Black
607750-001
In White
607751-001
In Red
622660–001
In Blue
622661–001
Before removing the service cover, follow these steps:
1.
Shut down the computer. If you are unsure whether the computer is off or in Hibernation, turn the
computer on, and then shut it down through the operating system.
2.
Disconnect all external devices connected to the computer.
3.
Disconnect the power from the computer by first unplugging the power cord from the AC outlet
and then unplugging the AC adapter from the computer.
4.
Remove the battery (see Battery on page 38).
Remove the service cover:
1.
Press in and slide latch (1) and release the right side of the service cover until the service cover
tabs disconnect from the computer.
2.
Lift up and remove the cover(2).
NOTE: Small tabs hold the cover in place. Firmly pull up on the cover to release the tabs.
Reverse this procedure to insert the service cover.
40
Chapter 4 Removal and replacement procedures
Downloaded from www.Manualslib.com manuals search engine
Hard drive
NOTE: Each hard drive spare part kit includes a cable adapter, bracket, and four rubber isolators.
Description
Spare part
number
Hard drive:
250-GB, 5400-RPM
608763–001
320–GB, 5400–RPM
608764–001
Before removing a hard drive, follow these steps:
1.
Shut down the computer. If you are unsure whether the computer is off or in Hibernation, turn the
computer on, and then shut it down through the operating system.
2.
Disconnect all external devices connected to the computer.
3.
Disconnect the power from the computer by first unplugging the power cord from the AC outlet
and then unplugging the AC adapter from the computer.
4.
Remove the battery (see Battery on page 38).
5.
Remove the service cover (see Battery on page 38).
Remove the hard drive:
1.
Lift up the vinyl cover to expose the hard drive.
2.
Using a small Phillips screwdriver, remove the 4 hard drive mounting screws.
Component replacement procedures
Downloaded from www.Manualslib.com manuals search engine
41
3.
Slide the tab (1) to disconnect the hard drive from the computer, and then lift the hard drive (2)
out of the bay.
Reverse this procedure to reassemble and install the hard drive.
42
Chapter 4 Removal and replacement procedures
Downloaded from www.Manualslib.com manuals search engine
WWAN module
Description
Spare part number
HP un2400 Mobile Broadband WWAN module
531993-001
HP F3607 SDG 850 Mobile Broadband WWAN module
574248-001
HP Mobile Broadband WWAN module
592625-161
HP Mobile Broadband WWAN module
607212-001
HP F3307 Pris 850 Mobile Broadband WWAN module
612599-001
HP F3307 Pris 900 Mobile Broadband WWAN module
612600-001
CAUTION: The WWAN module and the WLAN module are not interchangeable.
To prevent an unresponsive system, replace the wireless module only with a wireless module authorized
for use in the computer by the governmental agency that regulates wireless devices in your country or
region. If you replace the module and then receive a warning message, remove the module to restore
device functionality, and then contact technical support.
Before removing the WWAN module, follow these steps:
1.
Shut down the computer. If you are unsure whether the computer is off or in Hibernation, turn the
computer on, and then shut it down through the operating system.
2.
Disconnect all external devices connected to the computer.
3.
Disconnect the power from the computer by first unplugging the power cord from the AC outlet
and then unplugging the AC adapter from the computer.
4.
Remove the battery (see Battery on page 38).
5.
Remove the service cover (see Service cover on page 40).
Component replacement procedures
Downloaded from www.Manualslib.com manuals search engine
43
Remove the WWAN module:
1.
Disconnect the WWAN antenna cables from the terminals on the WWAN module.
NOTE: The number of WWAN cables varies, depending on the model. Note the labeling and
position of the cables. Pull the antenna cables up and off the terminals.
2.
44
Using a small Phillips screwdriver, remove the 2 module screws. This releases the module and
allows it to tilt up at a slight angle.
Chapter 4 Removal and replacement procedures
Downloaded from www.Manualslib.com manuals search engine
3.
Remove the WWAN module.
Reverse this procedure to install the WWAN module.
NOTE: When replacing the WWAN module, press the antenna cables firmly down onto the
terminals until securely connected. Route the cables carefully to prevent potential damage when the
service cover is replaced, as shown in the illustration below.
Component replacement procedures
Downloaded from www.Manualslib.com manuals search engine
45
WLAN module
46
Description
Spare part number
For use in Canada, the Cayman Islands, Guam, Puerto Rico, the U.S. Virgin Islands,
and the United States
607742–001
For use in Afghanistan, Albania, Algeria, Andorra, Angola, Antigua and Barbuda, Argentina,
Armenia, Aruba, Australia, Austria, Azerbaijan, the Bahamas, Bahrain, Bangladesh, Barbados,
Belarus, Belgium, Belize, Benin, Bermuda, Bhutan, Bolivia, Bosnia and Herzegovina, Botswana,
Brazil, the British Virgin Islands, Brunei, Bulgaria, Burkina Faso, Burundi, Cameroon, Cape Verde,
the Central African Republic, Chad, Chile, the People's Republic of China, Colombia, Comoros,
the Congo, Costa Rica, Croatia, Cyprus, the Czech Republic, Denmark, Djibouti, Dominica,
the Dominican Republic, East Timor, Ecuador, Egypt, El Salvador, Equatorial Guinea, Eritrea, Estonia,
Ethiopia, Fiji, Finland, France, French Guiana, Gabon, Gambia, Georgia, Germany, Ghana,
Gibraltar, Greece, Grenada, Guadeloupe, Guatemala, Guinea, Guinea-Bissau, Guyana, Haiti,
Honduras, Hong Kong, Hungary, Iceland, India, Ireland, Israel, Italy, the Ivory Coast, Jamaica,
Jordan, Kazakhstan, Kenya, Kiribati, Kyrgyzstan, Laos, Latvia, Lebanon, Lesotho, Liberia,
Liechtenstein, Lithuania, Luxembourg, Macedonia, Madagascar, Malawi, Malaysia, the Maldives,
Mali, Malta, the Marshall Islands, Martinique, Mauritania, Mauritius, Mexico, Micronesia, Monaco,
Mongolia, Montenegro, Morocco, Mozambique, Namibia, Nauru, Nepal, the Nether Antilles,
the Netherlands, New Zealand, Nicaragua, Niger, Nigeria, Norway, Oman, Pakistan, Palau,
Panama, Papua New Guinea, Paraguay, Peru, the Philippines, Poland, Portugal,
the Republic of Moldova, Romania, Russia, Rwanda, Samoa, San Marino, Sao Tome and Principe,
Saudi Arabia, Senegal, Serbia, the Seychelles, Sierra Leone, Singapore, Slovakia, Slovenia,
the Solomon Islands, Somalia, South Africa, South Korea, Spain, Sri Lanka, St. Kitts and Nevis,
St. Lucia, St. Vincent and the Grenadines, Suriname, Swaziland, Sweden, Switzerland, Taiwan,
Tajikistan, Tanzania, Togo, Tonga, Trinidad and Tobago, Tunisia, Turkey, Turkmenistan, Tuvalu,
Uganda, Ukraine, the United Arab Emirates, the United Kingdom, Uruguay, Uzbekistan, Vanuatu,
Venezuela, Vietnam, Yemen, Zaire, Zambia, and Zimbabwe
617551–001
For use in Afghanistan, Albania, Algeria, Andorra, Angola, Antigua and Barbuda, Argentina,
Armenia, Aruba, Australia, Austria, Azerbaijan, the Bahamas, Bahrain, Bangladesh, Barbados,
Belarus, Belgium, Belize, Benin, Bermuda, Bhutan, Bolivia, Bosnia and Herzegovina, Botswana,
Brazil, the British Virgin Islands, Brunei, Bulgaria, Burkina Faso, Burundi, Cameroon, Cape Verde,
the Central African Republic, Chad, Chile, the People's Republic of China, Colombia, Comoros,
the Congo, Costa Rica, Croatia, Cyprus, the Czech Republic, Denmark, Djibouti, Dominica,
the Dominican Republic, East Timor, Ecuador, Egypt, El Salvador, Equatorial Guinea, Eritrea, Estonia,
Ethiopia, Fiji, Finland, France, French Guiana, Gabon, Gambia, Georgia, Germany, Ghana,
Gibraltar, Greece, Grenada, Guadeloupe, Guatemala, Guinea, Guinea-Bissau, Guyana, Haiti,
Honduras, Hong Kong, Hungary, Iceland, India, Ireland, Israel, Italy, the Ivory Coast, Jamaica,
Jordan, Kazakhstan, Kenya, Kiribati, Kyrgyzstan, Laos, Latvia, Lebanon, Lesotho, Liberia,
Liechtenstein, Lithuania, Luxembourg, Macedonia, Madagascar, Malawi, Malaysia, the Maldives,
Mali, Malta, the Marshall Islands, Martinique, Mauritania, Mauritius, Mexico, Micronesia, Monaco,
Mongolia, Montenegro, Morocco, Mozambique, Namibia, Nauru, Nepal, the Nether Antilles,
the Netherlands, New Zealand, Nicaragua, Niger, Nigeria, Norway, Oman, Pakistan, Palau,
Panama, Papua New Guinea, Paraguay, Peru, the Philippines, Poland, Portugal,
the Republic of Moldova, Romania, Russia, Rwanda, Samoa, San Marino, Sao Tome and Principe,
Saudi Arabia, Senegal, Serbia, the Seychelles, Sierra Leone, Singapore, Slovakia, Slovenia,
the Solomon Islands, Somalia, South Africa, South Korea, Spain, Sri Lanka, St. Kitts and Nevis,
St. Lucia, St. Vincent and the Grenadines, Suriname, Swaziland, Sweden, Switzerland, Taiwan,
Tajikistan, Tanzania, Togo, Tonga, Trinidad and Tobago, Tunisia, Turkey, Turkmenistan, Tuvalu,
Uganda, Ukraine, the United Arab Emirates, the United Kingdom, Uruguay, Uzbekistan, Vanuatu,
Venezuela, Vietnam, Yemen, Zaire, Zambia, and Zimbabwe
602992-001
Chapter 4 Removal and replacement procedures
Downloaded from www.Manualslib.com manuals search engine
Description
Spare part number
For use in For use in Afghanistan, Albania, Algeria, Andorra, Angola, Antigua and Barbuda,
Argentina, Armenia, Aruba, Australia, Austria, Azerbaijan, the Bahamas, Bahrain, Bangladesh,
Barbados, Belarus, Belgium, Belize, Benin, Bermuda, Bhutan, Bolivia, Bosnia and Herzegovina,
Botswana, Brazil, the British Virgin Islands, Brunei, Bulgaria, Burkina Faso, Burundi, Cameroon,
Cape Verde, the Central African Republic, Chad, Chile, the People's Republic of China, Colombia,
Comoros, the Congo, Costa Rica, Croatia, Cyprus, the Czech Republic, Denmark, Djibouti,
Dominica, the Dominican Republic, East Timor, Ecuador, Egypt, El Salvador, Equatorial Guinea,
Eritrea, Estonia, Ethiopia, Fiji, Finland, France, French Guiana, Gabon, Gambia, Georgia, Germany,
Ghana, Gibraltar, Greece, Grenada, Guadeloupe, Guatemala, Guinea, Guinea-Bissau, Guyana,
Haiti, Honduras, Hong Kong, Hungary, Iceland, India, Ireland, Israel, Italy, the Ivory Coast, Jamaica,
Jordan, Kazakhstan, Kenya, Kiribati, Kyrgyzstan, Laos, Latvia, Lebanon, Lesotho, Liberia,
Liechtenstein, Lithuania, Luxembourg, Macedonia, Madagascar, Malawi, Malaysia, the Maldives,
Mali, Malta, the Marshall Islands, Martinique, Mauritania, Mauritius, Mexico, Micronesia, Monaco,
Mongolia, Montenegro, Morocco, Mozambique, Namibia, Nauru, Nepal, the Nether Antilles,
the Netherlands, New Zealand, Nicaragua, Niger, Nigeria, Norway, Oman, Pakistan, Palau,
Panama, Papua New Guinea, Paraguay, Peru, the Philippines, Poland, Portugal,
the Republic of Moldova, Romania, Russia, Rwanda, Samoa, San Marino, Sao Tome and Principe,
Saudi Arabia, Senegal, Serbia, the Seychelles, Sierra Leone, Singapore, Slovakia, Slovenia,
the Solomon Islands, Somalia, South Africa, South Korea, Spain, Sri Lanka, St. Kitts and Nevis,
St. Lucia, St. Vincent and the Grenadines, Suriname, Swaziland, Sweden, Switzerland, Taiwan,
Tajikistan, Tanzania, Togo, Tonga, Trinidad and Tobago, Tunisia, Turkey, Turkmenistan, Tuvalu,
Uganda, Ukraine, the United Arab Emirates, the United Kingdom, Uruguay, Uzbekistan, Vanuatu,
Venezuela, Vietnam, Yemen, Zaire, Zambia, and Zimbabwe
605560-005
Component replacement procedures
Downloaded from www.Manualslib.com manuals search engine
47
Description
Spare part number
For use in Afghanistan, Albania, Algeria, Andorra, Angola, Antigua and Barbuda, Argentina,
Armenia, Aruba, Australia, Austria, Azerbaijan, the Bahamas, Bahrain, Bangladesh, Barbados,
Belarus, Belgium, Belize, Benin, Bermuda, Bhutan, Bolivia, Bosnia and Herzegovina, Botswana,
Brazil, the British Virgin Islands, Brunei, Bulgaria, Burkina Faso, Burundi, Cameroon, Cape Verde,
the Central African Republic, Chad, Chile, the People's Republic of China, Colombia, Comoros,
the Congo, Costa Rica, Croatia, Cyprus, the Czech Republic, Denmark, Djibouti, Dominica,
the Dominican Republic, East Timor, Ecuador, Egypt, El Salvador, Equatorial Guinea, Eritrea, Estonia,
Ethiopia, Fiji, Finland, France, French Guiana, Gabon, Gambia, Georgia, Germany, Ghana,
Gibraltar, Greece, Grenada, Guadeloupe, Guatemala, Guinea, Guinea-Bissau, Guyana, Haiti,
Honduras, Hong Kong, Hungary, Iceland, India, Ireland, Israel, Italy, the Ivory Coast, Jamaica,
Jordan, Kazakhstan, Kenya, Kiribati, Kyrgyzstan, Laos, Latvia, Lebanon, Lesotho, Liberia,
Liechtenstein, Lithuania, Luxembourg, Macedonia, Madagascar, Malawi, Malaysia, the Maldives,
Mali, Malta, the Marshall Islands, Martinique, Mauritania, Mauritius, Mexico, Micronesia, Monaco,
Mongolia, Montenegro, Morocco, Mozambique, Namibia, Nauru, Nepal, the Nether Antilles,
the Netherlands, New Zealand, Nicaragua, Niger, Nigeria, Norway, Oman, Pakistan, Palau,
Panama, Papua New Guinea, Paraguay, Peru, the Philippines, Poland, Portugal,
the Republic of Moldova, Romania, Russia, Rwanda, Samoa, San Marino, Sao Tome and Principe,
Saudi Arabia, Senegal, Serbia, the Seychelles, Sierra Leone, Singapore, Slovakia, Slovenia,
the Solomon Islands, Somalia, South Africa, South Korea, Spain, Sri Lanka, St. Kitts and Nevis,
St. Lucia, St. Vincent and the Grenadines, Suriname, Swaziland, Sweden, Switzerland, Taiwan,
Tajikistan, Tanzania, Togo, Tonga, Trinidad and Tobago, Tunisia, Turkey, Turkmenistan, Tuvalu,
Uganda, Ukraine, the United Arab Emirates, the United Kingdom, Uruguay, Uzbekistan, Vanuatu,
Venezuela, Vietnam, Yemen, Zaire, Zambia, and Zimbabwe
593836–001
For use in Afghanistan, Albania, Algeria, Andorra, Angola, Antigua and Barbuda, Argentina,
Armenia, Aruba, Australia, Austria, Azerbaijan, the Bahamas, Bahrain, Bangladesh, Barbados,
Belarus, Belgium, Belize, Benin, Bermuda, Bhutan, Bolivia, Bosnia and Herzegovina, Botswana,
Brazil, the British Virgin Islands, Brunei, Bulgaria, Burkina Faso, Burundi, Cameroon, Cape Verde,
the Central African Republic, Chad, Chile, the People's Republic of China, Colombia, Comoros,
the Congo, Costa Rica, Croatia, Cyprus, the Czech Republic, Denmark, Djibouti, Dominica,
the Dominican Republic, East Timor, Ecuador, Egypt, El Salvador, Equatorial Guinea, Eritrea, Estonia,
Ethiopia, Fiji, Finland, France, French Guiana, Gabon, Gambia, Georgia, Germany, Ghana,
Gibraltar, Greece, Grenada, Guadeloupe, Guatemala, Guinea, Guinea-Bissau, Guyana, Haiti,
Honduras, Hong Kong, Hungary, Iceland, India, Ireland, Israel, Italy, the Ivory Coast, Jamaica,
Jordan, Kazakhstan, Kenya, Kiribati, Kyrgyzstan, Laos, Latvia, Lebanon, Lesotho, Liberia,
Liechtenstein, Lithuania, Luxembourg, Macedonia, Madagascar, Malawi, Malaysia, the Maldives,
Mali, Malta, the Marshall Islands, Martinique, Mauritania, Mauritius, Mexico, Micronesia, Monaco,
Mongolia, Montenegro, Morocco, Mozambique, Namibia, Nauru, Nepal, the Nether Antilles,
the Netherlands, New Zealand, Nicaragua, Niger, Nigeria, Norway, Oman, Pakistan, Palau,
Panama, Papua New Guinea, Paraguay, Peru, the Philippines, Poland, Portugal,
the Republic of Moldova, Romania, Russia, Rwanda, Samoa, San Marino, Sao Tome and Principe,
Saudi Arabia, Senegal, Serbia, the Seychelles, Sierra Leone, Singapore, Slovakia, Slovenia,
the Solomon Islands, Somalia, South Africa, South Korea, Spain, Sri Lanka, St. Kitts and Nevis,
St. Lucia, St. Vincent and the Grenadines, Suriname, Swaziland, Sweden, Switzerland, Taiwan,
Tajikistan, Tanzania, Togo, Tonga, Trinidad and Tobago, Tunisia, Turkey, Turkmenistan, Tuvalu,
Uganda, Ukraine, the United Arab Emirates, the United Kingdom, Uruguay, Uzbekistan, Vanuatu,
Venezuela, Vietnam, Yemen, Zaire, Zambia, and Zimbabwe
600370-001
CAUTION: The WWAN module and the WLAN module are not interchangeable.
To prevent an unresponsive system, replace the wireless module only with a wireless module authorized
for use in the computer by the governmental agency that regulates wireless devices in your country or
region. If you replace the module and then receive a warning message, remove the module to restore
computer functionality, and then contact technical support through Help and Support.
48
Chapter 4 Removal and replacement procedures
Downloaded from www.Manualslib.com manuals search engine
Before removing the WLAN module, follow these steps:
1.
Shut down the computer. If you are unsure whether the computer is off or in Hibernation, turn the
computer on, and then shut it down through the operating system.
2.
Disconnect all external devices connected to the computer.
3.
Disconnect the power from the device by first unplugging the power cord from the AC outlet and
then unplugging the AC adapter from the computer.
4.
Remove the battery (see Battery on page 38).
5.
Remove the service cover (see Service cover on page 40).
Remove the WLAN module:
1.
Disconnect the WLAN antenna cables
NOTE: The number of WLAN cables varies, depending on model. Note the labeling and
position of the cables. Disconnect the antenna cables by pulling the cables off the terminals.
2.
Using a small Phillips screwdriver, remove the 2 WLAN module screws. This releases the module
to tilt up at a slight angle
Component replacement procedures
Downloaded from www.Manualslib.com manuals search engine
49
3.
Lift up and remove the WLAN module at an angle.
Reverse this procedure to install the WLAN module.
NOTE: When replacing, press the antenna cables firmly down onto the terminals until securely
connected. Route the cables carefully to prevent potential damage when the service cover is replaced,
as shown in the illustration below.
50
Chapter 4 Removal and replacement procedures
Downloaded from www.Manualslib.com manuals search engine
Memory module
Description
Spare part number
2048-MB memory module (667-MHz, DDR2)
616750-001
1024-MB memory module (667-MHz, DDR2)
616749-001
Before removing the memory module, follow these steps:
1.
Shut down the computer. If you are unsure whether the computer is off or in Hibernation, turn the
computer on, and then shut it down through the operating system.
2.
Disconnect all external devices connected to the computer.
3.
Disconnect the power from the computer by first unplugging the power cord from the AC outlet
and then unplugging the AC adapter from the computer.
4.
Remove the battery (see Battery on page 38).
5.
Remove the service cover (see Service cover on page 40).
Remove the memory module:
1.
Using a small Phillips screwdriver, loosen the 2 memory module shield screws.
Component replacement procedures
Downloaded from www.Manualslib.com manuals search engine
51
2.
Lift up and remove the memory shield.
3.
Using your fingers, spread the 2 retention clips outward until the memory module tilts up at a 45degree angle.
4.
Remove the memory expansion module from the computer.
Reverse this procedure to install the memory module.
52
Chapter 4 Removal and replacement procedures
Downloaded from www.Manualslib.com manuals search engine
RTC battery
Description
Spare part number
RTC battery
608771-001
Before removing the real-time clock (RTC) battery, follow these steps:
1.
Shut down the computer. If you are unsure whether the computer is off or in Hibernation, turn the
computer on, and then shut it down through the operating system.
2.
Disconnect all external devices connected to the computer.
3.
Disconnect the power from the computer by first unplugging the power cord from the AC outlet
and then unplugging the AC adapter from the computer.
4.
Remove the battery (see Battery on page 38).
5.
Remove the service cover (see Service cover on page 40).
Remove the RTC battery:
▲
Remove the RTC battery from the socket on the system board.
Reverse this procedure to install the RTC battery. When installing the RTC battery, make sure the “+”
sign faces up.
Component replacement procedures
Downloaded from www.Manualslib.com manuals search engine
53
Keyboard
NOTE: The keyboard spare part kit includes a keyboard cable.
For use in:
Spare part
number
For use in:
Spare part number
Belgium
608759-A41
The Netherlands
608759-B31
Brazil
608759-201
Portugal
608759-131
The Czech Republic
608759-221
Russia
608759-251
Denmark, Finland, and Norway
608759-DH1
Saudi Arabia
608759-171
France
608759-051
Slovenia
608759-BA1
French Canada
608759-121
South Korea
608759-AD1
Germany
608759-041
Spain
608759-071
Greece
608759-DJ1
Switzerland
608759-BG1
Hungary
608759-211
Taiwan
608759-AB1
Israel
608759-BB1
Thailand
608759-281
Italy
608759-061
Turkey
608759-141
Japan
608759-291
The United Kingdom
608759-031
Latin America
608759-161
The United States
608759-001
With textured finish:
Before removing the keyboard, follow these steps:
54
1.
Shut down the computer. If you are unsure whether the computer is off or in Hibernation, turn the
computer on, and then shut it down through the operating system.
2.
Disconnect all external devices connected to the computer.
3.
Disconnect the power from the computer by first unplugging the power cord from the AC outlet
and then unplugging the AC adapter from the computer.
4.
Remove the battery (see Battery on page 38).
5.
Remove the service cover (see Service cover on page 40).
Chapter 4 Removal and replacement procedures
Downloaded from www.Manualslib.com manuals search engine
Remove the keyboard:
1.
Remove the three Phillips PM2.0×6.0 screws that secure the keyboard to the computer.
2.
Turn the computer right-side up, with the front toward you.
3.
Open the computer as far as it will open.
4.
Lift the rear edge of the keyboard (1) until it rests at an angle.
5.
Slide the keyboard (2) back until the keyboard cable and connector are accessible.
Component replacement procedures
Downloaded from www.Manualslib.com manuals search engine
55
6.
Release the zero insertion force (ZIF) connector (3) to which the keyboard cable is attached, and
then disconnect the keyboard cable (4) from the system board.
7.
Remove the keyboard.
Reverse this procedure to install the keyboard.
56
Chapter 4 Removal and replacement procedures
Downloaded from www.Manualslib.com manuals search engine
Top cover
Description
Spare part number
In black (for HP and CPQ)
607766-001
Before removing the top cover, follow these steps:
1.
Shut down the computer. If you are unsure whether the computer is off or in Hibernation, turn the
computer on, and then shut it down through the operating system.
2.
Disconnect all external devices connected to the computer.
3.
Disconnect the power from the computer by first unplugging the power cord from the AC outlet
and then unplugging the AC adapter from the computer.
4.
Remove the battery (see Battery on page 38).
5.
Remove the service cover (see Service cover on page 40).
6.
Remove the keyboard (see Keyboard on page 54).
Remove the top cover.
1.
Turn the computer upside down, with the front toward you.
2.
Remove the six Phillips PM2.0×6.0 screws (1) and the Phillips PM2.5×4.0 screw (2) that secure
the top cover to the base enclosure.
3.
Turn the computer right-side up, with the front toward you.
4.
Open the computer as far as it will open.
5.
Disconnect the speaker cable (1) from the system board.
Component replacement procedures
Downloaded from www.Manualslib.com manuals search engine
57
6.
58
Release the ZIF connector (2) to which the TouchPad cable is connected, and then disconnect the
TouchPad cable (3) from the system board.
Chapter 4 Removal and replacement procedures
Downloaded from www.Manualslib.com manuals search engine
7.
Remove the five Phillips PM2.0×6.0 screws that secure the top cover to the base enclosure.
8.
Release the top cover (1) by lifting the rear edge until it disengages from the base enclosure.
9.
Remove the top cover (2) by lifting it straight up.
Reverse this procedure to install the top cover.
Component replacement procedures
Downloaded from www.Manualslib.com manuals search engine
59
Speakers
Description
Spare part number
Speakers (include cables)
608770–001
Before removing the speakers, follow these steps:
1.
Shut down the computer. If you are unsure whether the computer is off or in Hibernation, turn the
computer on, and then shut it down through the operating system.
2.
Disconnect all external devices connected to the computer.
3.
Disconnect the power from the computer by first unplugging the power cord from the AC outlet
and then unplugging the AC Adapter from the computer.
4.
Remove the battery (see Battery on page 38).
5.
Remove the following components:
a.
Service cover (see Service cover on page 40).
b.
Keyboard (see Keyboard on page 54).
c.
Top cover (see Top cover on page 57).
Remove the speakers:
60
1.
Turn the top cover upside down, with the front toward you.
2.
Release the TouchPad cable (1) from the top cover. (The TouchPad cable is attached to the top
cover with double-sided adhesive).
3.
Release the speaker cable from the clips (2) built into the TouchPad bracket.
4.
Remove the two Phillips PM2.0×4.0 screws (3) that secure the speakers to the top cover.
Chapter 4 Removal and replacement procedures
Downloaded from www.Manualslib.com manuals search engine
5.
Remove the speakers (4).
Reverse this procedure to install the speakers.
Component replacement procedures
Downloaded from www.Manualslib.com manuals search engine
61
TouchPad
Description
Spare part number
For use only with a black top cover
607766-001
Before removing the TouchPad, follow these steps:
1.
Shut down the computer. If you are unsure whether the computer is off or in Hibernation, turn the
computer on, and then shut it down through the operating system.
2.
Disconnect all external devices connected to the computer.
3.
Disconnect the power from the computer by first unplugging the power cord from the AC outlet
and then unplugging the AC adapter from the computer.
4.
Remove the battery (see Battery on page 38).
5.
Remove the following components:
a.
Service cover (see Service cover on page 40).
b.
Keyboard (see Keyboard on page 54).
c.
Top cover (see Top cover on page 57).
d.
Speakers (see Speakers on page 60).
Remove the TouchPad:
62
1.
Turn the top cover upside down, with the front toward you.
2.
Release the TouchPad cable (1) from the top cover. (The TouchPad cable is attached to the top
cover with double-sided adhesive).
3.
Remove the two Phillips PM2.0×4.0 screws (2) that secure the TouchPad bracket to the top cover.
4.
Remove the TouchPad bracket (3).
5.
Release the TouchPad (4) by lifting the front edge until it rests at an angle.
Chapter 4 Removal and replacement procedures
Downloaded from www.Manualslib.com manuals search engine
6.
Remove the TouchPad (5) by sliding it forward.
Reverse this procedure to install the TouchPad.
Component replacement procedures
Downloaded from www.Manualslib.com manuals search engine
63
Display assembly
Description
Spare part number
10.1-in display assembly (includes display panel cable, 2 WLAN transceivers and cables, 2 WWAN transceivers and cables,
and webcam/microphone module and cable):
●
10.1-in, WSVGA, AntiGlare, standard display assembly in black
607744-001
●
10.1-in, WSVGA, AntiGlare, standard display assembly in white
607745-001
●
10.1-in, WSVGA, Anti-Glare, standard display assembly in black
607746-001
●
10.1-in, WSVGA, standard display assembly in black
619469-001
●
10.1-in, WSVGA, standard display assembly in black
619470-001
●
10.1-in, WSVGA, Anti-Glare, standard display assembly in black
618875-001
●
10.1-in, WSVGA, AntiGlare display panel non-PMMA in red
622656-001
●
10.1-in, WSVGA, AntiGlare display panel non-PMMA with WWAN, in blue
622657-001
●
10.1-in, WSVGA, AntiGlare display panel non-PMMA with WWAN, in red
622658-001
●
10.1-in, WSVGA, AntiGlare display panel non-PMMA with WWAN, in blue
622559–001
Before removing the display assembly, follow these steps:
1.
Shut down the computer. If you are unsure whether the computer is off or in Hibernation, turn the
computer on, and then shut it down through the operating system.
2.
Disconnect all external devices connected to the computer.
3.
Disconnect the power from the computer by first unplugging the power cord from the AC outlet
and then unplugging the AC adapter from the computer.
4.
Remove the battery (see Battery on page 38).
5.
Remove the service cover (see Service cover on page 40).
6.
Disconnect the WWAN antenna cables from the WWAN module (see WWAN module
on page 43).
7.
Disconnect the WLAN antenna cables from the WLAN module (see WLAN module on page 46).
8.
Remove the keyboard (see Keyboard on page 54).
9.
Remove the top cover (see Top cover on page 57).
Remove the display assembly:
64
1.
Close the computer.
2.
Turn the computer upside down, with the front toward you.
Chapter 4 Removal and replacement procedures
Downloaded from www.Manualslib.com manuals search engine
3.
Release the WLAN antenna cables (1) from the clips built into the base enclosure (2).
4.
Turn the computer right-side up, with the front toward you.
5.
Open the computer as far as it will open.
6.
Disconnect the display panel cable (1) from the system board.
Component replacement procedures
Downloaded from www.Manualslib.com manuals search engine
65
7.
Release the wireless antenna cables (2) from the clip built into the base enclosure.
CAUTION: Support the display assembly when removing the following screws. Failure to
support the display assembly can result in damage to the display assembly and other device
components.
8.
66
Remove the two Phillips PM2.0×4.0 screws (1) that secure the display assembly to the base
enclosure.
Chapter 4 Removal and replacement procedures
Downloaded from www.Manualslib.com manuals search engine
9.
Remove the display assembly (2).
Reverse this procedure to reassemble and install the display assembly.
Component replacement procedures
Downloaded from www.Manualslib.com manuals search engine
67
System board
NOTE: The system board spare part kit includes replacement thermal material.
Description
Spare part number
Intel Atom™ N450 1.66-GHz processor with 512-KB level 2 cache, 667-MHz FSB
607740-001
Intel Atom™ N470 1.83-GHz processor with 512-KB level 2 cache, 667-MHz FSB, 6.5W TDP
607741-001
Intel Atom™ N455 1.66-GHz processor with 512-KB level 2 cache, 667-MHz FSB
618873-001
Intel Atom™ N475 1.83-GHz processor with 512-KB level 2 cache, 667-MHz FSB, 6.5 TDP
618874-001
Intel Atom™ N450 1.66-GHz processor with 512-KB level 2 cache, 667-MHz FSB without WWAN
module
621300-001
Intel Atom™ N470 1.83-GHz processor with 512-KB level 2 cache, 667-MHz FSB, 6.5W TDP
without WWAN module
621301-001
Intel Atom™ N455 1.66-GHz processor with 512-KB level 2 cache, 667-MHz FSB without WWAN
module
621302-001
Intel Atom™ N475 1.83-GHz processor with 512-KB level 2 cache, 667-MHz FSB, 6.5 TDP without
WWAN module
621303-001
Before removing the system board, follow these steps:
1.
Shut down the computer. If you are unsure whether the computer is off or in Hibernation, turn the
computer on, and then shut it down through the operating system.
2.
Disconnect all external devices connected to the computer.
3.
Disconnect the power from the computer by first unplugging the power cord from the AC outlet
and then unplugging the AC adapter from the computer.
4.
Remove the battery (see Battery on page 38).
5.
Remove the service cover (see Service cover on page 40).
6.
Disconnect the hard drive cable from the system board (see Hard drive on page 41).
7.
Disconnect the WWAN antenna cables from the WWAN module (see WWAN module
on page 43).
8.
Disconnect the WLAN antenna cables from the WLAN module (see WLAN module on page 46).
9.
Remove the keyboard (see Keyboard on page 54).
10. Remove the top cover (see Top cover on page 57).
When replacing the system board, be sure that the following components are removed from the
defective system board and installed on the replacement system board:
68
●
SIM (see SIM on page 39)
●
WWAN module (see WWAN module on page 43)
Chapter 4 Removal and replacement procedures
Downloaded from www.Manualslib.com manuals search engine
●
WLAN module (see WLAN module on page 46)
●
Memory module (see Memory module on page 51)
●
RTC battery (see RTC battery on page 53)
●
Fan/heat sink assembly (see Fan/heat sink assembly on page 71)
Remove the system board:
1.
Disconnect the display panel cable from the system board.
2.
Disconnect the power connector cable from the system board.
3.
Remove the Phillips PM2.0×4.0 screw (1) that secures the system board to the base enclosure.
4.
Lift the right side of the system board (2) until it rests at an angle.
Component replacement procedures
Downloaded from www.Manualslib.com manuals search engine
69
5.
Remove the system board (3) by sliding it up and away from the base enclosure.
Reverse the procedure to install the system board.
NOTE: When reinstalling the system board, the base enclosure actuator needs to be aligned properly
with the power switch so that the parts are not damaged in the installation process.
70
Chapter 4 Removal and replacement procedures
Downloaded from www.Manualslib.com manuals search engine
Fan/heat sink assembly
Description
Spare part number
Fan/heat sink assembly (includes replacement thermal material)
608772-001
NOTE: To properly ventilate the computer, allow at least a 7.6-cm (3-inch) clearance on the left side
of the computer. The computer uses an electric fan for ventilation. The fan is controlled by a
temperature sensor and is designed to turn on automatically when high temperature conditions exist.
These conditions are affected by high external temperatures, system power consumption, power
management/battery conservation configurations, battery fast charging, and software requirements.
Exhaust air is displaced through the ventilation grill located on the left side of the computer.
Before removing the fan/heat sink assembly, follow these steps:
1.
Shut down the computer. If you are unsure whether the computer is off or in Hibernation, turn the
computer on, and then shut it down through the operating system.
2.
Disconnect all external devices connected to the computer.
3.
Disconnect the power from the computer by first unplugging the power cord from the AC outlet
and then unplugging the AC adapter from the computer.
4.
Remove the battery (see Battery on page 38).
5.
Remove the service cover (see Service cover on page 40).
6.
Disconnect the hard drive cable from the system board (see Hard drive on page 41).
7.
Disconnect the WWAN antenna cables from the WWAN module (see WWAN module
on page 43).
8.
Disconnect the WLAN antenna cables from the WLAN module (see WLAN module on page 46).
9.
Remove the following components:
a.
Keyboard (see Keyboard on page 54).
b.
Top cover (see Top cover on page 57).
c.
System board (see System board on page 68).
Remove the fan/heat sink assembly:
1.
Turn the system board upside down, with the front toward you.
2.
Disconnect the fan cable (1) from the system board.
3.
Following the 1, 2, 3 sequence stamped into the fan/heat sink assembly, loosen the three Phillips
PM2.0×4.0 captive screws (2) that secure the fan/heat sink assembly to the system board.
Component replacement procedures
Downloaded from www.Manualslib.com manuals search engine
71
4.
Remove the fan/heat sink assembly (3).
NOTE: Due to the adhesive quality of the thermal material located between the fan/heat sink
assembly and system board components, it may be necessary to move the fan/heat sink assembly
from side to side to detach it from the system board.
NOTE: The thermal material must be thoroughly cleaned from the surfaces of the fan/heat sink
assembly and the system board each time the fan/heat sink assembly is removed: Thermal paste is
used on the processor (1) and the fan/heat sink assembly section (2) that services it.
Reverse this procedure to install the fan/heat sink assembly.
72
Chapter 4 Removal and replacement procedures
Downloaded from www.Manualslib.com manuals search engine
Power connector cable
Description
Spare part number
Power connector cable
607755-001
Before removing the power connector cable, follow these steps:
1.
Shut down the computer. If you are unsure whether the computer is off or in Hibernation, turn the
computer on, and then shut it down through the operating system.
2.
Disconnect all external devices connected to the computer.
3.
Disconnect the power from the computer by first unplugging the power cord from the AC outlet
and then unplugging the AC adapter from the computer.
4.
Remove the battery (see Battery on page 38).
5.
Remove the service cover (see Service cover on page 40).
6.
Disconnect the hard drive cable from the system board (see Hard drive on page 41).
7.
Disconnect the WWAN antenna cables from the WWAN module (see WWAN module
on page 43).
8.
Disconnect the WLAN antenna cables from the WLAN module (see WLAN module on page 46).
9.
Remove the following components:
a.
Keyboard (see Keyboard on page 54).
b.
Top cover (see Top cover on page 57).
c.
Display assembly (see Display assembly on page 64).
d.
System board (see System board on page 68).
Remove the power connector cable:
1.
Remove the Phillips PM2.0×4.0 screw that secures the power connector and bracket to the base
enclosure.
2.
Remove the power connector bracket .
NOTE: The power connector bracket is included in the base enclosure spare part kit, spare part
number 607765-001.
Component replacement procedures
Downloaded from www.Manualslib.com manuals search engine
73
3.
Remove the power connector cable .
Reverse this procedure to install the power connector cable.
74
Chapter 4 Removal and replacement procedures
Downloaded from www.Manualslib.com manuals search engine
5
Setup Utility
Starting Setup Utility
Setup Utility is a ROM-based information and customization utility that can be used even when your
Windows operating system is not working.
The utility reports information about the computer and provides settings for startup, security, and other
preferences.
To start Setup Utility:
▲
Open Setup Utility by turning on or restarting the computer, and then pressing f10 while the “F10
= BIOS Setup Options” message is displayed in the lower-left corner of the screen.
Using Setup Utility
Changing the language of Setup Utility
The following procedure explains how to change the language of Setup Utility. If Setup Utility is not
already running, begin at step 1. If Setup Utility is already running, begin at step 2.
1.
Open Setup Utility by turning on or restarting the computer, and then pressing f10 while the “F10
= BIOS Setup Options” message is displayed in the lower-left corner of the screen.
2.
Use the arrow keys to select System Configuration > Language, and then press enter.
3.
Use the arrow keys to select a language, and then press enter.
4.
When a confirmation prompt with your language selected is displayed, press enter.
5.
To save your change and exit Setup Utility, use the arrow keys to select Exit > Exit Saving
Changes, and then press enter. Your change goes into effect immediately.
Your change goes into effect immediately.
Starting Setup Utility
Downloaded from www.Manualslib.com manuals search engine
75
Navigating and selecting in Setup Utility
Because Setup Utility is not Windows based, it does not support the TouchPad. Navigation and
selection are by keystroke.
●
To choose a menu or a menu item, use the arrow keys.
●
To choose an item in a list or to toggle a field, for example an Enable/Disable field, use either the
arrow keys or f5 or f6.
●
To select an item, press enter.
●
To close a text box or return to the menu display, press esc.
●
To display additional navigation and selection information while Setup Utility is open, press f1.
Displaying system information
The following procedure explains how to display system information in Setup Utility. If Setup Utility is
not open, begin at step 1. If Setup Utility is open, begin at step 2.
1.
Open Setup Utility by turning on or restarting the computer, and then pressing f10 while the “F10
= BIOS Setup Options” message is displayed in the lower-left corner of the screen.
2.
Select the Main menu. System information such as the system time and date, and identification
information about the computer is displayed.
3.
To exit Setup Utility without changing any settings, use the arrow keys to select Exit > Exit
Discarding Changes, and then press enter.
Restoring default settings in Setup Utility
The following procedure explains how to restore the Setup Utility default settings. If Setup Utility is not
already running, begin at step 1. If Setup Utility is already running, begin at step 2.
1.
Open Setup Utility by turning on or restarting the computer, and then pressing f10 while the “F10
= BIOS Setup Options” message is displayed in the lower-left corner of the screen.
2.
Use the arrow keys to select Exit > Load Setup Defaults, and then press enter.
3.
When the Setup Confirmation is displayed, press enter.
4.
To save your change and exit Setup Utility, use the arrow keys to select Exit > Exit Saving
Changes, and then press enter.
The Setup Utility default settings go into effect when the computer restarts.
NOTE: Your password, security, and language settings are not changed when you restore the factory
default settings.
76
Chapter 5 Setup Utility
Downloaded from www.Manualslib.com manuals search engine
Exiting Setup Utility
You can exit Setup Utility with or without saving changes.
●
To exit Setup Utility and save your changes from the current session:
If the Setup Utility menus are not visible, press esc to return to the menu display. Then use the
arrow keys to select Exit > Exit Saving Changes, and then press enter.
●
To exit Setup Utility without saving your changes from the current session:
If the Setup Utility menus are not visible, press esc to return to the menu display. Then use the
arrow keys to select Exit > Exit Discarding Changes, and then press enter. After either
choice, the computer restarts in Windows.
Setup Utility Menus
Main Menu
The menu tables in this section provide an overview of the Setup Utility options
NOTE: Some of the Setup Utility menu items listed in this chapter may not be supported by your
computer.
Select
To do this
System information
●
View and change the system time and date.
●
View identification information about the computer.
●
View specification information about the processor,
memory size, and system BIOS.
Security Menu
Select
To do this
Administrator password
Enter, change, or delete an administrator password.
Power-On password
Enter, change, or delete a power-on password.
Exiting Setup Utility
Downloaded from www.Manualslib.com manuals search engine
77
System Configuration Menu
Select
To do this
Language Support
Change the Setup Utility language.
Processor C4 State
Enable/disable the processor C4 standby state.
Boot Options
Set the following boot options:
●
f10 and f12 Delay (sec.)―Set the delay for the f10 and
f12 functions of Setup Utility in intervals of 5 seconds
each (0, 5, 10, 15, 20).
●
HP QuickWeb―Enable/disable the QuickWeb Boot
menu in Setup Utility.
●
Internal Network Adapter boot―Enable/disable boot
from Internal Network Adapter.
●
Boot Device Priority―Set the boot device priority for:
◦
Internal hard drive (select models only)
◦
USB Floppy
◦
USB CD/DVD ROM Drive
◦
USB flash drive
◦
USB Hard drive
◦
USB Card Reader
◦
Network adapter
NOTE: Only the devices attached to the system
will appear in the boot order menu.
Diagnostics Menu
78
Select
To do this
Hard Disk Self Test (select models only)
Run a comprehensive self-test on the hard drive.
Memory Test
Run a diagnostic test on the system memory.
Chapter 5 Setup Utility
Downloaded from www.Manualslib.com manuals search engine
6
Backup and recovery
Windows 7
To protect your information, back up your files and folders. In case of system failure, you can use the
backup files to restore your computer.
CAUTION: In the event of a hard drive failure, you cannot use your computer to access the Disaster
Recovery utility. Therefore, HP recommends that you download the Disaster Recovery utility SoftPaq,
and then extract it to a USB flash drive as soon as possible after software setup. For details, refer to
“Downloading and extracting the Disaster Recovery utility” later in this section.
Depending on your computer model, you may have one of the following backup and recovery
solutions:
●
Roxio BackOnTrack
●
HP Recovery Manager
NOTE: For detailed information, perform a search for these topics in Help and Support.
Backing up and recovering using Roxio BackOnTrack
Successful recovery after a system failure depends on whether you have completely backed up your
files. If Roxio BackOnTrack is preinstalled on your computer, it allows you to create a backup of your
computer image. You should create the initial backup immediately after software setup. As you add
new software and data files, you should continue to back up your system on a regular basis to maintain
a reasonably current backup.
Note the following guidelines when backing up your information:
●
Store personal files in the Documents library and back up this folder regularly.
●
Back up templates stored in their associated programs.
●
Save customized settings in a window, toolbar, or menu bar by taking a screen shot of your
settings. The screen shot can be a time-saver if you have to reset your preferences.
To copy the screen and paste it into a word-processing document, follow these steps:
1.
Display the screen.
2.
Copy the screen: To copy the active window, press alt+prt sc. To copy the entire screen, press prt
sc.
Windows 7
Downloaded from www.Manualslib.com manuals search engine
79
3.
Open a word-processing document, click Edit, and then click Paste.
4.
Save the document.
Creating a copy of the hard drive
The back up drive function of BackOnTrack creates a Disaster Recovery Set that is an exact image of
your hard drive data. You can back up the image to an external hard drive (purchased separately).
To create a Disaster Recovery Set using BackOnTrack, follow these steps:
NOTE: Be sure that the computer is connected to AC power before you start the backup process.
1.
Click Start, click All Programs, and then click Roxio.
2.
Click BackOnTrack, click BackOnTrack Home, and then click Disaster Recovery.
3.
Click Backup drive.
4.
Select a drive to back up.
5.
Add a comment to describe the backup.
NOTE: Comments are optional, but adding comments can help you remember the purpose of
the backup. The date and list of drives being backed up are automatically included in the
description.
6.
Select a destination for the Disaster Recovery Set.
NOTE: The destination cannot be a network drive.
7.
Click the action button at the bottom-right of the computer screen.
8.
Follow the on-screen instructions.
Performing a recovery
In case of system failure or instability, the computer provides the following ways to recover your files:
●
BackOnTrack Disaster Recovery utility: You can use Disaster Recovery to recover your hard drive
image (including your files, programs, and operating system) after a hard drive failure.
●
BackOnTrack Instant Restore utility: You can use Instant Restore to quickly restore your computer to
a working state if a software-related problem occurs. The Instant Restore utility automatically
creates working states periodically. You can also define a working state by saving the current
computer state manually.
For more information about computer system states, refer to the BackOnTrack software Help.
Using the Disaster Recovery utility
NOTE: To perform a recovery with Disaster Recovery, you need a USB flash drive (purchased
separately). For optimum performance, the capacity of the drive should be no larger than 2 GB.
80
Chapter 6 Backup and recovery
Downloaded from www.Manualslib.com manuals search engine
Disaster Recovery recovers data from a Disaster Recovery Set that you previously created with Roxio
BackOnTrack. Disaster Recovery is available from the HP Web site in a compressed file called a
SoftPaq.
NOTE: Running the SoftPaq makes the USB drive bootable.
Before performing a disaster recovery, you must download the Disaster Recovery utility and extract it to
a USB flash drive.
Downloading and extracting the Disaster Recovery utility
To download and extract Disaster Recovery, follow these steps:
1.
Connect a bootable USB flash drive or external drive to a USB port on your computer.
2.
Open your Web browser, go to http://www.hp.com/support, and select your country or region.
3.
Enter the SoftPaq number SP42226 in the Search box, press enter, and then follow the on-screen
instructions.
4.
Click Download only to save the file to your computer.
5.
When prompted, click Save, and then select the external drive from the list of storage locations.
6.
After the file is downloaded, navigate to the USB flash drive or external drive, and then doubleclick the SoftPaq file to format the USB flash drive and extract the Disaster Recovery files.
7.
If prompted to do so, restart your computer after the installation is complete.
Restoring your hard drive image
To restore your hard drive image using Disaster Recovery, follow these steps:
1.
Connect the external hard drive containing the Disaster Recovery Set to your computer.
2.
Connect the bootable USB flash drive containing the extracted Disaster Recovery utility to a USB
port on your computer.
3.
Change the boot device order by turning on or restarting the computer, and then pressing f9.
4.
Use the arrow keys to select the USB flash drive, and then press enter.
5.
At the Roxio BackOnTrack Disaster Recovery screen, select Disaster Recovery, and then click
Next.
6.
Browse to the external hard drive containing the Disaster Recovery Set, and then click Next.
7.
Click Next to proceed with the recovery.
NOTE: This process may take several minutes.
8.
After a message on the screen reports a successful recovery, click Finish.
Windows 7
Downloaded from www.Manualslib.com manuals search engine
81
Using the Instant Restore utility
You can restore your computer from Windows when the operating system is functioning. If the
operating system is not functioning, you can also access the utility by restarting your computer.
NOTE: For more information about the Instant Restore utility, refer to the BackOnTrack software Help.
Using the Instant Restore utility when the operating system is functioning
To recover information when the operating system is functioning properly, follow these steps:
1.
Save and close all open documents and close any open programs.
2.
Click Start, click All Programs, and then click Roxio.
3.
Click BackOnTrack, click BackOnTrack Home, and then click Instant Restore.
4.
Click Restore State, and then select a restore state.
5.
Click the action button in the bottom-right corner of the computer screen.
6.
Click Yes to confirm your selected restore state.
When the restore process is complete, the computer restarts and a notification message is displayed.
Using the Instant Restore utility when the operating system is not functioning
To recover information when the operating system is not functioning, follow these steps:
1.
Restart the computer.
NOTE: If the operating system has stopped responding and the computer screen is blue, restart
the computer by turning the power switch off and then on.
2.
When the computer logo is displayed on the screen, press f6 repeatedly until the Windows status
bar is displayed.
3.
When the Roxio BackOnTrack screen is displayed, follow the on-screen instructions.
Using Windows Backup and Restore
To create a backup using Windows Backup and Restore, follow these steps:
NOTE: Be sure that the computer is connected to AC power before you start the backup process.
NOTE: The backup process may take over an hour, depending on file size and the speed of the
computer.
1.
Click Start, click All Programs, click Maintenance, and then click Backup and Restore.
2.
Follow the on-screen instructions to set up and create a backup.
NOTE: Windows includes the User Account Control feature to improve the security of your
computer. You may be prompted for your permission or password for tasks such as installing
software, running utilities, or changing Windows settings. Refer to Help and Support for more
information.
82
Chapter 6 Backup and recovery
Downloaded from www.Manualslib.com manuals search engine
Using system restore points
When you back up your system, you are creating a system restore point. A system restore point allows
you to save and name a snapshot of your hard drive at a specific point in time. You can then revert
back to that point if you want to reverse subsequent changes made to your system.
NOTE: Recovering to an earlier restore point does not affect data files saved or e-mails created since
the last restore point.
You also can create additional restore points to provide increased protection for your system files and
settings.
When to create restore points
●
Before you add or extensively modify software or hardware.
●
Periodically, whenever the system is performing optimally.
NOTE: If you revert to a restore point and then change your mind, you can reverse the restoration.
Creating a system restore point
1.
Click Start, click Control Panel, click System and Security, and then click System.
2.
In the left pane, click System protection.
3.
Click the System Protection tab.
4.
Under Protection Settings, select the disk for which you want to create a restore point.
5.
Click Create.
6.
Follow the on-screen instructions.
Restoring to a previous date and time
To revert to a restore point (created at a previous date and time) when the computer was functioning
optimally, follow these steps:
1.
Click Start, click Control Panel, click System and Security, and then click System.
2.
In the left pane, click System protection.
3.
Click the System Protection tab.
4.
Click System Restore.
5.
Follow the on-screen instructions.
Windows 7
Downloaded from www.Manualslib.com manuals search engine
83
Backing up and recovering using HP Recovery Manager
If your computer includes HP Recovery Manager, tools provided by the operating system and by HP
Recovery Manager software are designed to help you with the following tasks for safeguarding your
information and restoring it in case of a system failure:
●
Backing up your information
●
Creating a set of recovery discs
●
Creating system restore points
●
Recovering a program or driver
●
Performing a full system recovery
Backing up your information
As you add new software and data files, you should back up your system on a regular basis to
maintain a reasonably current backup. Back up your system at the following times:
●
At regularly scheduled times
NOTE: Set reminders to back up your information periodically.
●
Before the computer is repaired or restored
●
Before you add or modify hardware or software
Note the following when backing up:
●
Create system restore points using the Windows System Restore feature, and periodically copy
them to a disc.
●
Store personal files in the Documents library, and periodically back up this folder.
●
Back up templates stored in their associated programs.
●
Save the customized settings in a window, toolbar, or menu bar by taking a screen shot of the
settings. The screen shot can be a time-saver if you have to reset your preferences.
To copy the screen and paste the image into a word-processing document:
1.
Display the screen.
2.
Copy the screen:
To copy only the active window, press alt+prt sc.
To copy the entire screen, press prt sc.
84
Chapter 6 Backup and recovery
Downloaded from www.Manualslib.com manuals search engine
3.
Open a word-processing document, click Edit, and then click Paste.
4.
Save the document.
●
You can back up your information to an optional external hard drive, a network drive, or discs.
●
When backing up to discs, use any of the following types of discs (purchased separately): CD-R,
CD-RW, DVD+R, DVD-R, or DVD±RW. The discs you use depend on the type of optical drive you
are using.
NOTE: The external optical drive must be connected to the USB port on the computer, not to a
USB port on another external device, such as a hub or docking station.
NOTE: DVDs store more information than CDs, so using them for backup reduces the number of
recovery discs required.
●
When backing up to discs, number each disc before inserting it into an optical drive.
Creating a set of recovery discs
HP recommends that you create recovery discs to be sure that you can restore your system to its original
factory state if you experience serious system failure or instability. Create these discs after setting up the
computer for the first time.
NOTE: This task will require an optional external optical drive. The external optical drive must be
connected to the USB port on the computer, not to a USB port on another external device, such as a
hub or docking station.
Handle these discs carefully and keep them in a safe place. The software allows the creation of only
one set of recovery discs.
Note the following guidelines before creating recovery discs:
●
You will need high-quality DVD-R, DVD+R, BD-R (writable Blu-ray), or CD-R discs. All these discs
are purchased separately. DVDs have a larger storage capacity than CDs. If you use CDs, up to
20 discs may be required, whereas only a few DVDs are required.
NOTE: Double-layer discs and read-write discs—such as CD-RW, DVD±RW, and BD-RE
(rewritable Blu-ray) discs—are not compatible with the Recovery Manager software.
●
■ The computer must be connected to AC power during this process.
●
■ Only one set of recovery discs can be created per computer.
●
■ Number each disc before inserting it into an optical drive.
●
If necessary, you can exit the program before you have finished creating the recovery discs. The
next time you open Recovery Manager, you will be prompted to continue the disc creation
process.
To create a set of recovery discs:
1.
Click Start, click All Programs, click Recovery Manager, and then click Recovery Disc
Creation.
2.
Follow the on-screen instructions.
Windows 7
Downloaded from www.Manualslib.com manuals search engine
85
Performing a recovery
NOTE: You can recover only files that you have previously backed up. HP recommends that you use
Recovery Manager to create a set of recovery discs (entire drive backup) as soon as you set up your
computer.
Recovery Manager software allows you to repair or restore the system if you experience system failure
or instability. Recovery Manager works from recovery discs that you create or from a dedicated
recovery partition (select models only) on the hard drive. However, computers that include a solid-state
drive (SSD) may not have a recovery partition. If that is the case, recovery discs have been included
with your computer. Use these discs to recover your operating system and software.
NOTE: Windows has its own built-in repair features, such as System Restore. If you have not already
tried these features, try them before using Recovery Manager. For more information on these built-in
repair features, click Start, and then click Help and Support.
NOTE: Recovery Manager recovers only the software that was preinstalled at the factory. Software
not provided with this computer must be downloaded from the manufacturer’s Web site or reinstalled
from the disc provided by the manufacturer.
Recovering using the recovery discs
To restore the system files from the recovery discs:
1.
Back up all personal files.
2.
Insert the first recovery disc into an optional optical drive, and restart the computer.
NOTE: The external optical drive must be connected to the USB port on the computer, not to a
USB port on another external device, such as a hub or docking station.
3.
Follow the on-screen instructions.
Recovering using the partition on the hard drive (select models only)
On some models, you can perform a recovery from the partition on the hard drive, which is accessed
by pressing either the Start button or f11. This restores the computer to its factory condition.
NOTE: This method of recovery is also an HP Recovery Manager solution.
NOTE: Computers with an SSD may not have a recovery partition. If the computer does not have a
recovery partition, you will not be able to recover using this procedure. Recovery discs have been
included for computers that do not have a partition. Use these discs to recover your operating system
and software.
To restore the system from the partition, follow these steps:
1.
Access Recovery Manager in either of the following ways:
●
86
Click Start, click All Programs, click Recovery Manager, and then click Recovery
Manager.
Chapter 6 Backup and recovery
Downloaded from www.Manualslib.com manuals search engine
– or –
a.
Turn on or restart the computer.
b.
Press f11 while the “Press <F11> for recovery” message is displayed on the screen.
NOTE:
It may take several minutes for Recovery Manager to load.
2.
In the Recovery Manager window, click System Recovery.
3.
Follow the on-screen instructions.
Windows XP
To protect your information, back up your files and folders. In case of system failure, you can use the
backup files to restore your computer.
CAUTION: In the event of a hard drive failure, you cannot use your computer to access the Disaster
Recovery utility. Therefore, HP recommends that you download the Disaster Recovery utility SoftPaq,
and then extract it to a USB flash drive as soon as possible after software setup. For details, refer to
“Downloading and extracting the Disaster Recovery utility” later in this section.
NOTE: For detailed information, perform a search for these topics in Help and Support.
Backing up your information
Successful recovery after a system failure depends on whether you have completely backed up your
files. If Roxio BackOnTrack is preinstalled on your computer, it allows you to create a backup of your
computer image. You should create the initial backup immediately after software setup. As you add
new software and data files, you should continue to back up your system on a regular basis to maintain
a reasonably current backup.
Note the following guidelines when backing up your information:
●
Store personal files in the My Documents folder and back up this folder regularly.
●
Back up templates stored in their associated programs.
●
Save customized settings in a window, toolbar, or menu bar by taking a screen shot of your
settings. The screen shot can be a time-saver if you have to reset your preferences.
To copy the screen and paste it into a word-processing document, follow these steps:
1.
Display the screen.
2.
Copy the screen:
To copy the active window, press alt+prt sc.
To copy the entire screen, press prt sc.
3.
Open a word-processing document, click Edit, and then click Paste.
4.
Save the document.
Windows XP
Downloaded from www.Manualslib.com manuals search engine
87
Creating a copy of the hard drive
The back up drive function of BackOnTrack creates a Disaster Recovery Set that is an exact image of
your hard drive data. You can back up the image to an external hard drive (purchased separately).
To create a Disaster Recovery Set using BackOnTrack, follow these steps:
NOTE: Be sure that the computer is connected to AC power before you start the backup process.
1.
Click Start, click All Programs, and then click Roxio.
2.
Click BackOnTrack, click BackOnTrack Home, and then click Disaster Recovery.
3.
Click Backup drive.
4.
Select a drive to back up.
5.
Add a comment to describe the backup.
NOTE: Comments are optional, but adding comments can help you remember the purpose of
the backup. The date and list of drives being backed up are automatically included in the
description.
6.
Select a destination for the Disaster Recovery Set.
NOTE: The destination cannot be a network drive.
7.
Click the action button at the bottom-right of the computer screen.
8.
Follow the on-screen instructions.
Performing a recovery
In case of system failure or instability, the computer provides the following ways to recover your files:
●
BackOnTrack Disaster Recovery utility: You can use Disaster Recovery to recover your hard drive
image (including your files, programs, and operating system) after a hard drive failure.
●
BackOnTrack Instant Restore utility: You can use Instant Restore to quickly restore your computer to
a working state if a software-related problem occurs. The Instant Restore utility automatically
creates working states periodically. You can also define a working state by saving the current
computer state manually.
For more information about computer system states, refer to the BackOnTrack software Help.
88
Chapter 6 Backup and recovery
Downloaded from www.Manualslib.com manuals search engine
Using the Disaster Recovery Utility
NOTE: To perform a recovery with Disaster Recovery, you need a USB flash drive (purchased
separately). For optimum performance, the capacity of the drive should be no larger than 2 GB.
Disaster Recovery recovers data from a Disaster Recovery Set that you previously created with Roxio
BackOnTrack. Disaster Recovery is available from the HP Web site in a compressed file called a
SoftPaq.
NOTE: Running the SoftPaq makes the USB drive bootable.
Before performing a disaster recovery, you must download the Disaster Recovery utility and extract it to
a USB flash drive.
Downloading and extracting the Disaster Recovery utility
To download and extract Disaster Recovery, follow these steps:
1.
Connect a bootable USB flash drive or external drive to a USB port on your computer.
2.
Open your Web browser, go to http://www.hp.com/support, and select your country or region.
3.
Enter the SoftPaq number SP42226 in the Search box, press enter, and then follow the on-screen
instructions.
4.
Click Download only to save the file to your computer.
5.
When prompted, click Save, and then select the external drive from the list of storage locations.
6.
After the file is downloaded, navigate to the USB flash drive or external drive, and then doubleclick the SoftPaq file to format the USB flash drive and extract the Disaster Recovery files.
7.
If prompted to do so, restart your computer after the installation is complete.
Restoring your hard drive image
To restore your hard drive image using Disaster Recovery, follow these steps:
1.
Connect the external hard drive containing the Disaster Recovery Set to your computer.
2.
Connect the bootable USB flash drive containing the extracted Disaster Recovery utility to a USB
port on your computer.
3.
Change the boot device order by turning on or restarting the computer, and then pressing f9.
4.
Use the arrow keys to select the USB flash drive, and then press enter.
5.
At the Roxio BackOnTrack Disaster Recovery screen, select Disaster Recovery, and then click
Next.
6.
Browse to the external hard drive containing the Disaster Recovery Set, and then click Next.
7.
Click Next to proceed with the recovery.
This process may take several minutes.
8.
After a message on the screen reports a successful recovery, click Finish.
Windows XP
Downloaded from www.Manualslib.com manuals search engine
89
Using the Instant Restore utility
You can restore your computer from Windows when the operating system is functioning. If the
operating system is not functioning, you can also access the utility by restarting your computer.
NOTE: For more information about the Instant Restore utility, refer to the BackOnTrack software Help.
Using the Instant Restore utility when the operating system is functioning
To recover information when the operating system is functioning properly, follow these steps:
1.
Save and close all open documents and close any open programs.
2.
Click Start, click All Programs, and then click Roxio.
3.
Click BackOnTrack, click BackOnTrack Home, and then click Instant Restore.
4.
Click Restore State, and then select a restore state.
5.
Click the action button in the bottom-right corner of the computer screen.
6.
Click Yes to confirm your selected restore state.
When the restore process is complete, the computer restarts and a notification message is displayed.
Using the Instant Restore utility when the operating system is not functioning
To recover information when the operating system is not functioning, follow these steps:
1.
Restart the computer.
NOTE: If the operating system has stopped responding and the computer screen is blue, restart
the computer by turning the power switch off and then on.
90
2.
When the computer logo is displayed on the screen, press f6 repeatedly until the Windows status
bar is displayed.
3.
When the Roxio BackOnTrack screen is displayed, follow the on-screen instructions.
Chapter 6 Backup and recovery
Downloaded from www.Manualslib.com manuals search engine
7
Connector pin assignments
Audio-in (microphone)
Pin
Signal
1
Audio signal in
2
Audio signal in
3
Ground
Audio-out (headphone)
Pin
Signal
1
Audio out, left channel
2
Audio out, right channel
3
Ground
Audio-in (microphone)
Downloaded from www.Manualslib.com manuals search engine
91
External monitor
92
Pin
Signal
1
Red analog
2
Green analog
3
Blue analog
4
Not connected
5
Ground
6
Ground analog
7
Ground analog
8
Ground analog
9
+5 VDC
10
Ground
11
Monitor detect
12
DDC 2B data
13
Horizontal sync
14
Vertical sync
15
DDC 2B clock
Chapter 7 Connector pin assignments
Downloaded from www.Manualslib.com manuals search engine
RJ-45 (network)
Pin
Signal
1
Transmit +
2
Transmit -
3
Receive +
4
Unused
5
Unused
6
Receive -
7
Unused
8
Unused
Universal Serial Bus
Pin
Signal
1
+5 VDC
2
Data
3
Data +
4
Ground
RJ-45 (network)
Downloaded from www.Manualslib.com manuals search engine
93
8
Power cord set requirements
The wide-range input feature of the computer permits it to operate from any line voltage from 100 to
120 volts AC, or from 220 to 240 volts AC
The 3-conductor power cord set included with the computer meets the requirements for use in the
country or region where the equipment is purchased.
Power cord sets for use in other countries and regions must meet the requirements of the country or
region where the computer is used.
Requirements for all countries
The following requirements are applicable to all countries and regions:
94
●
The length of the power cord set must be at least 1.5 m (5.0 ft) and no more than 2.0 m (6.5 ft).
●
All power cord sets must be approved by an acceptable accredited agency responsible for
evaluation in the country or region where the power cord set will be used.
●
The power cord sets must have a minimum current capacity of 10 amps and a nominal voltage
rating of 125 or 250 V AC, as required by the power system of each country or region.
●
The appliance coupler must meet the mechanical configuration of an EN 60 320/IEC 320
Standard Sheet C13 connector for mating with the appliance inlet on the back of the computer.
Chapter 8 Power cord set requirements
Downloaded from www.Manualslib.com manuals search engine
Requirements for specific countries and regions
Country/region
Accredited agency
Applicable note number
Australia
EANSW
1
Austria
OVE
1
Belgium
CEBC
1
Canada
CSA
2
Denmark
DEMKO
1
Finland
FIMKO
1
France
UTE
1
Germany
VDE
1
Italy
IMQ
1
Japan
METI
3
The Netherlands
KEMA
1
Norway
NEMKO
1
The People's Republic of China
COC
5
South Korea
EK
4
Sweden
SEMKO
1
Switzlerland
SEV
1
Taiwan
BSMI
4
The United Kingdom
BSI
1
The United States
UL
2
1.
The flexible cord must be Type HO5VV-F, 3-conductor, 1.0-mm² conductor size. Power cord set fittings (appliance coupler
and wall plug) must bear the certification mark of the agency responsible for evaluation in the country or region where it
will be used.
2.
The flexible cord must be Type SPT-3 or equivalent, No. 18 AWG, 3-conductor. The wall plug must be a two-pole
grounding type with a NEMA 5-15P (15 A, 125 V) or NEMA 6-15P (15 A, 250 V) configuration.
3.
The appliance coupler, flexible cord, and wall plug must bear a “T” mark and registration number in accordance with the
Japanese Dentori Law. The flexible cord must be Type VCT or VCTF, 3-conductor, 1.00-mm² conductor size. The wall plug
must be a two-pole grounding type with a Japanese Industrial Standard C8303 (7 A, 125 V) configuration.
4.
The flexible cord must be Type RVV, 3-conductor, 0.75-mm² conductor size. Power cord set fittings (appliance coupler
and wall plug) must bear the certification mark of the agency responsible for evaluation in the country or region where it
will be used.
5.
The flexible cord must be Type VCTF, 3-conductor, 0.75-mm² conductor size. Power cord set fittings (appliance coupler
and wall plug) must bear the certification mark of the agency responsible for evaluation in the country or region where it
will be used.
Requirements for specific countries and regions
Downloaded from www.Manualslib.com manuals search engine
95
9
Recycling
Battery
When a battery has reached the end of its useful life, do not dispose of the battery in general
household waste. Follow the local laws and regulations in your area for computer battery disposal.
Display
WARNING! The backlight contains mercury. Caution must be exercised when removing and
handling the backlight to avoid damaging this component and causing exposure to the mercury.
CAUTION: The procedures in this chapter can result in damage to display components. The only
components intended for recycling purposes are the liquid crystal display (LCD) panel and the
backlight. When you remove these components, handle them carefully.
NOTE: Materials Disposal. This HP product contains mercury in the backlight in the display assembly
that might require special handling at end-of-life. Disposal of mercury may be regulated because of
environmental considerations. For disposal or recycling information, contact your local authorities, or
see the Electronic Industries Alliance (EIA) Web site at http://www.eiai.org.
This section provides disassembly instructions for the display assembly. The display assembly must be
disassembled to gain access to the backlight (1) and the liquid crystal display (LCD) panel (2).
NOTE: The procedures provided in this chapter are general disassembly instructions. Specific details,
such as screw sizes, quantities, and locations, and component shapes and sizes, can vary from one
computer model to another.
96
Chapter 9 Recycling
Downloaded from www.Manualslib.com manuals search engine
Perform the following steps:
1.
Remove all screw covers (1) and screws (2) that secure the display bezel to the display assembly.
2.
Lift up and out on the left and right inside edges (1) and the top and bottom inside edges (2) of
the display bezel until the bezel disengages from the display assembly.
3.
Remove the display bezel 3.
Display
Downloaded from www.Manualslib.com manuals search engine
97
98
4.
Disconnect all display panel cables (1) from the display inverter and remove the inverter 2.
5.
Remove all screws (1) that secure the display panel assembly to the display enclosure.
6.
Remove the display panel assembly (2) from the display enclosure.
7.
Turn the display panel assembly upside down.
8.
Remove all screws that secure the display panel frame to the display panel.
9.
Use a sharp-edged tool to cut the tape (1) that secures the sides of the display panel to the display
panel frame.
Chapter 9 Recycling
Downloaded from www.Manualslib.com manuals search engine
10. Remove the display panel frame (2) from the display panel.
11. Remove the screws (1) that secure the backlight cover to the display panel.
12. Lift the top edge of the backlight cover (2) and swing it outward.
13. Remove the backlight cover.
14. Turn the display panel right-side up.
Display
Downloaded from www.Manualslib.com manuals search engine
99
15. Remove the backlight cables (1) from the clip (2) in the display panel.
16. Turn the display panel upside down.
17. Remove the backlight frame from the display panel.
WARNING! The backlight contains mercury. Exercise caution when removing and handling the
backlight to avoid damaging this component and causing exposure to the mercury.
100 Chapter 9 Recycling
Downloaded from www.Manualslib.com manuals search engine
18. Remove the backlight from the backlight frame.
19. Disconnect the display cable (1) from the LCD panel.
20. Remove the screws (2) that secure the LCD panel to the display rear panel.
21. Release the LCD panel (3) from the display rear panel.
22. Release the tape (4) that secures the LCD panel to the display rear panel.
23. Remove the LCD panel.
24. Recycle the LCD panel and backlight.
Display 101
Downloaded from www.Manualslib.com manuals search engine
Index
A
AC adapter
spare part number 25, 26
AC adaptor light 11
action keys 8
audio, product description 2
audio-in jack
connector pinout 91
location 11
audio-out jack
connector pinout 91
location 11
B
back cover
spare part number 27
base access door
spare part number 27
base enclosure, spare part
number 17, 27
battery
removal 38
spare part number 27
spare part numbers 17, 38
battery bay 13
battery release latches 13
boot options 78
buttons
TouchPad 6
C
cables, service considerations 32
caps lock light 7
changing the language of Setup
Utility 75
chipset, product description 1
components
bottom 13
display 12
front 8
102 Index
Downloaded from www.Manualslib.com manuals search engine
left-side 11
pointing device 6
right-side 10
TouchPad 6
computer feet
locations 37
spare part number 37
connector pinout
audio-in jack 91
audio-out jack 91
external monitor port 92
headphone 91
microphone 91
monitor port 92
network jack 93
RJ-45 jack 93
Universal Serial Bus (USB)
port 93
connectors, service
considerations 32
D
Diagnostics Menu, Setup
Utility 78
Digital Media Slot 10
diskette drive
precautions 32
product description 2
display assembly
removal 64
spare part
numbers 16, 26, 27, 64
display bezel, spare part
numbers 22, 27
display enclosure, spare part
numbers 23
Display Hinge Kit, spare part
number 23, 28
display panel cable, spare part
number 23
display panel, spare part
numbers 22
Display Screw Kit, spare part
number 23, 27
drive light 11
drives, preventing damage 32
E
electrostatic discharge 33
Ethernet, product description 2
exiting Setup Utility 77
external media cards, product
description 3
external monitor port
connector pinout 92
location 11
F
fan/heat sink assembly
removal 69
spare part number 17, 28, 69
feet
locations 37
spare part number 37
fn key 8
G
graphics, product description 1
grounding equipment and
methods 35
H
hard drive
precautions 32
product description 2
removal 41
self test 78
spare part
numbers 20, 21, 24, 27, 41
headphone jack
connector pinout 91
location 11
hinge, spare part number 23, 28
I
internal media cards, product
description 3
J
jacks
audio-in 11
audio-out 11
headphone 11
microphone 11
network 11
RJ-45 11
K
keyboard
product description 3
removal 54
spare part
numbers 16, 27, 28, 54
keys
action 8
fn 8
Windows applications 8
Windows logo 8
L
language support 78
lights
AC adaptor 11
caps lock 7
drive 11
mute 7
power 10
webcam 12
wireless 7
M
Main Menu, Setup Utility 77
memory module
product description 2
removal 51
spare part
numbers 18, 28, 51
memory test 78
microphone 12
microphone jack
connector pinout 91
location 11
model name 1
modem, product description 2
monitor port
connector pinout 92
location 11
mute light 7
N
navigating in Setup Utility
network jack
connector pinout 93
location 11
76
O
operating system, product
description 4
optical drive
product description 2
P
packing guidelines 34
panels, product description 1
passwords 77
plastic parts 31
pointing device
components 6
product description 3
ports
external monitor 11
monitor 11
product description 3
Universal Serial Bus
(USB) 10, 11
power connector 11
power connector cable
removal 73
spare part number 17, 27, 73
power cord
set requirements 94
spare part numbers 25, 26
power light 10
power requirements, product
description 3
power switch 10
processor C4 state 78
processor, product description 1
product description
audio 2
chipset 1
diskette drive 2
Ethernet 2
external media cards 3
graphics 1
hard drive 2
internal media cards 3
keyboard 3
memory module 2
modem 2
operating system 4
optical drive 2
panels 1
pointing device 3
ports 3
power requirements 3
processors 1
product name 1
security 3
serviceability 4
video 2
wireless 2
product name 1
R
removal/replacement
preliminaries 31
procedures 36
restoring default settings in Setup
Utility 76
RJ-45 jack
connector pinout 93
location 11
RTC battery
removal 53
spare part number 17, 28, 53
Rubber Kit, spare part
number 17, 25, 27
S
security cable slot 11
Security Menu, Setup Utility 77
security, product description 3
selecting in Setup Utility 76
serial number 14
service considerations 31
Service cover
spare part number 29
Index 103
Downloaded from www.Manualslib.com manuals search engine
service cover
removal 40
spare part number 21, 27, 40
service tag 14, 36
serviceability, product
description 4
Setup Utility
changing the language 75
Diagnostics Menu 78
exiting 77
Main Menu 77
menus 77
navigating 76
restoring default settings 76
Security Menu 77
selecting 76
starting 75
System Configuration
Menu 78
using 75
Setup Utility menus 77
SIM, removal 39
speakers
location 9
removal 60
spare part number 17, 28, 60
starting Setup Utility 75
static-shielding materials 35
system board
removal 68
spare part
numbers 17, 26, 68
System Configuration Menu, Setup
Utility 78
system information 76, 77
T
tools required 31
top cover
removal 57
spare part number
spare part numbers
TouchPad
removal 62
spare part numbers
zone 6
TouchPad button 6
transporting guidelines
27
17, 57
17, 62
34
104 Index
Downloaded from www.Manualslib.com manuals search engine
U
Universal Serial Bus (USB) port
connector pinout 93
location 10, 11
using Setup Utility 75
V
vent 11
vents
location 9
video, product description 2
W
webcam 12
webcam light 12
webcam/microphone module,
spare part number 22, 27
Windows applications key 8
Windows logo key 8
wireless light 7
wireless module, product
description 2
WLAN module
removal 46
spare part
numbers 18, 26, 46
workstation guidelines 34
WWAN antennas 12
WWAN module
removal 43
spare part number 18, 26, 43
Downloaded from www.Manualslib.com manuals search engine