HP 5820 Switch Series - CNET Content Solutions

QuickSpecs
HP 5820 Switch Series
Overview
Models
HP 5820-14XG-SFP+ Switch with 2 Slots
HP 5820X-24XG-SFP+ Switch
HP 5820AF-24XG Switch
JC106A
JC102A
JG219A
Key features
For enterprise edge, or distribution/data center
Up to 24 ports of 10GbE per unit/194 per stack
Flex chassis—modular resiliency
Cut-through switching for very low latency
Hot-swappable I/O, power supplies, and fans
Product overview
The HP 5820 Switch Series supports advanced features that deliver a unique combination of unmatched 10 Gigabit Ethernet; Fibre
Channel over Ethernet (FCoE) connectivity; high-availability architecture; full Layer 2/3 dual-stack IPv4/IPv6; and line-rate, low-latency
performance on all ports. Extensible embedded application capabilities enable these switches to integrate services into the network,
consolidating devices and appliances to simplify deployment and reduce power consumption and rack space. Extremely versatile, the
switches can be used in high-performance, high-density building or department cores as part of a consolidated network; for data
center top-of-rack server access; or as high-performance Layer 3, 10GbE aggregation switches in campus and data center networks.
Features and benefits
Quality of Service (QoS)
Powerful QoS feature
creates traffic classes based on access control lists (ACLs), IEEE 802.1p precedence, IP, and DSCP or Type of Service (ToS)
precedence; supports filter, redirect, mirror, or remark; supports the following congestion actions: strict priority (SP) queuing,
weighted round robin (WRR), weighted fair queuing (WFQ), weighted random early discard (WRED), weighted deficit round robin
(WDRR), and SP+WDRR
Integrated network services
with support for open application architecture (OAA) modules, extends and integrates application capability into the network
Ring Resiliency Protection Protocol (RRPP)
provides fast recovery for ring Ethernet-based topology; helps ensure consistent application performance for applications such
as VoIP
Management
Remote configuration and management
is available through a secure Web browser or a command-line interface (CLI)
IEEE 802.1ab LLDP discovery
advertises and receives management information from adjacent devices on a network
USB support
File copy
allows users to copy switch files to and from a USB flash drive
DHCP options
DA - 13791 North America — Version 21 — March 19, 2014
Page 1
QuickSpecs
HP 5820 Switch Series
Overview
provides server (RFC 2131), client, snooping, and relay options
SNMPv1, v2c, and v3
facilitate centralized discovery, monitoring, and secure management of networking devices
sFlow
provides scalable ASIC-based network monitoring and accounting; this allows network operators to gather a variety of
sophisticated network statistics and information for capacity planning and real-time network monitoring purposes
Network Time Protocol (NTP)
synchronizes timekeeping among distributed time servers and clients; keeps consistent timekeeping among all clock-dependent
devices within the network so that the devices can provide diverse applications based on the consistent time
Connectivity
High-density port connectivity
194 10-GbE ports with a 40 Gbps resilient backplane
Data center I/O consolidation
the 5820-14XG FCoE module supports two 4x8/4/2 Gbps FCoE modules (up to eight FC ports total) to reduce cost and
complexity while boosting network performance
Auto-MDIX
provides automatic adjustments for straight-through or crossover cables on all 10/100 and 10/100/1000 ports
Jumbo frames
on Gigabit Ethernet and 10-Gigabit ports, jumbo frames allow high-performance remote backup and disaster-recovery services
IPv6 native support
IPv6 host
enables switches to be managed and deployed at the IPv6 network's edge
Dual stack (IPv4/IPv6)
transitions from IPv4 to IPv6, supporting connectivity for both protocols
MLD snooping
forwards IPv6 multicast traffic to the appropriate interface
IPv6 ACL/QoS
supports ACL and QoS for IPv6 network traffic, preventing traffic flooding
IPv6 routing
supports IPv6 static routes and IPv6 versions of RIP, OSPF, IS-IS, and Border Gateway Protocol (BGP) routing protocols
Performance
Hardware-based wire-speed access control lists (ACLs)
helps provide high levels of security and ease of administration without impacting network performance with a feature-rich
TCAM-based ACL implementation
Unique versatile architecture
supports the best of both fixed-port and modular configurations
Cut-through switching
delivers wire-speed, line-rate performance on all ports, as well as cut-through switching for low latency
Resiliency and high availability
Data center–optimized design
HP 5820AF-24XG Switch (JG219A) supports front-to-back/back-to-front airflow for hot/cold aisles, rear rack mounts, and
redundant hot-swappable AC or DC power and fans
Manageability
DA - 13791 North America — Version 21 — March 19, 2014
Page 2
QuickSpecs
HP 5820 Switch Series
Overview
Full-featured console
provides complete control of the switch with a familiar CLI
Web interface
allows configuration of the switch from any Web browser on the network
RMON and sFlow
provide advanced monitoring and reporting capabilities for statistics, history, alarms, and events
Multiple configuration files
allow multiple configuration files to be stored to a flash image
Troubleshooting
Ingress and egress port monitoring
enable network problem solving
Traceroute and ping
enable testing of network connectivity
Virtual cable tests
provide visibility to cable problems
Layer 2 switching
32K MAC addresses
provide access to many Layer 2 devices
4,094 port-based VLANs
provide security between workgroups
IEEE 802.1ad QinQ and Selective QinQ
increase the scalability of an Ethernet network by providing a hierarchical structure; connect multiple LANs on a high-speed
campus or metro network
Gigabit Ethernet port aggregation
allows grouping of ports to increase overall data throughput to a remote device
10 GbE port aggregation
allows grouping of ports to increase overall data throughput to a remote device
Spanning Tree/MSTP, RSTP, and STP Root Guard
prevent network loops
sFlow
allows traffic sampling
GVRP VLAN Registration Protocol
allows automatic learning and dynamic assignment of VLANs
Layer 3 services
Address Resolution Protocol (ARP)
determines the MAC address of another IP host in the same subnet; supports static ARPs; gratuitous ARP allows detection of
duplicate IP addresses; proxy ARP allows normal ARP operation between subnets or when subnets are separated by a Layer 2
network
Dynamic Host Configuration Protocol (DHCP)
simplifies the management of large IP networks and supports client and server; DHCP Relay enables DHCP operation across
subnets
Layer 3 routing
Layer 3 IPv4 routing
provides routing of IPv4 at media speed; supports static routes, RIP and RIPv2, OSPF, IS-IS, and BGP
DA - 13791 North America — Version 21 — March 19, 2014
Page 3
QuickSpecs
HP 5820 Switch Series
Overview
Routing Information Protocol (RIP) and RIPng support
provides complete support of RIP for both IPv4 and IPv6
OSPF and OSPFv3 support
provides complete support of OSPF for both IPv4 and IPv6
IS-IS and IS-ISv6 support
provides complete support of IS-IS for both IPv4 and IPv6
Layer 3 IPv6 routing
provides routing of IPv6 at media speed; supports static routes, RIPng, OSPFv3, IS-ISv6, and BGP4+
Bidirectional Forwarding Detection (BFD)
enables link connectivity monitoring and reduces network convergence time for RIP, OSPF, BGP, IS-IS, VRRP, MPLS, and IRF
Virtual Router Redundancy Protocol (VRRP) and VRRP Extended
allow quick failover of router ports
Policy-based routing
makes routing decisions based on policies set by the network administrator
IGMPv1, v2, and v3
allow individual hosts to be registered on a particular VLAN
PIM-SSM, PIM-DM, and PIM-SM (for IPv4 and IPv6)
support IP Multicast address management and inhibition of DoS attacks
Equal-Cost Multipath (ECMP)
enables multiple equal-cost links in a routing environment to increase link redundancy and scale bandwidth
Security
Defense-in-depth security
provides integrated and distributed security enforcement that can be managed from a central location, such as the HP Intelligent
Management Center (IMC)
Advanced processor queuing mechanism
helps prevent denial-of-service (DoS) attacks, while DHCP snooping helps ensure that devices can only receive an IP address
from a legitimate DHCP server on the network
RADIUS/HWTACACS
eases switch management security administration by using a password authentication server
Secure Shell (SSHv2)
encrypts all transmitted data for secure, remote CLI access over IP networks
IEEE 802.1X-based dynamic delivery of QoS, ACLs, and VLANs
allows complete control over user network access
Guest VLAN
provides a browser-based environment to authenticated clients, similar to IEEE 802.1X
Port isolation
secures and adds privacy, and prevents malicious attackers from obtaining user information
Port security
allows access only to specified MAC addresses, which can be learned or specified by the administrator
MAC-based authentication
allows or denies access to the switch based on a client MAC address
IP Source Guard
helps prevent IP spoofing attacks
HTTPS management
provides secure Web management
URPF
limits malicious traffic on a network
Multi-Customer Edge (MCE)-Multicast Virtual Routing and Forwarding (MVRF)
DA - 13791 North America — Version 21 — March 19, 2014
Page 4
QuickSpecs
HP 5820 Switch Series
Overview
provide MPLS Edge router support
Public Key Infrastructure (PKI)
is used to control access
Convergence
Voice VLAN
automatically assigns VLAN and priority for IP phones, simplifying network configuration and maintenance
LLDP-MED
is a standard extension that automatically configures network devices, including LLDP-capable IP phones
Internet Group Management Protocol (IGMP)
utilizes Any-Source Multicast (ASM) or Source-Specific Multicast (SSM) to manage IPv4 multicast networks; supports IGMPv1, v2,
and v3
Protocol Independent Multicast (PIM)
defines modes of Internet multicasting to allow one-to-many and many-to-many transmission of information; PIM Dense Mode
(DM), Sparse Mode (SM), and Source-Specific Mode (SSM) are support
Monitor and diagnostics
Port mirroring
enables traffic on a port to be simultaneously sent to a network analyzer for monitoring
OAM (802.3ah)
operations, administration and maintenance (OAM) management capability detects data link layer problems that occurred in the
"last mile"; monitors the status of the link between the two devices
CFD (802.1ag)
connectivity fault detection (CFD) provides a Layer 2 link OAM (operations, administration, and maintenance) mechanism used
for link connectivity detection and fault locatin
Additional information
Intelligent Resilient Framework (IRF)
Creates virtual resilient switching fabrics, where two or more switches perform as a single Layer 2 switch and Layer 3
router
Does not require switches to be co-located and allows them to be part of a disaster-recovery system
Allows servers or switches to be attached using standard LACP for automatic load balancing and high availability
Simplifies network operation by eliminating the complexity of Spanning Tree Protocol, ECMP, or VRRP
OAA modules
support wireless network management and high-performance security applications; leverage network infrastructure
investment
Green IT and power
improves energy efficiency through the use of the latest advances in silicon development; shuts off unused ports and utilizes
variable-speed fans, reducing energy costs
High scalability with IRF
HP Intelligent Resilient Framework (IRF) technology simplifies the architecture of server access networks; up to nine HP
5820/5820AF stackable switches can be combined to deliver unmatched scalability of virtualized access layer switches and
flatter, two-tier FlexFabric networks using IRF, which reduces cost and complexity
Warranty and support
1-year warranty
with advance replacement and 10-calendar-day delivery (available in most countries)
DA - 13791 North America — Version 21 — March 19, 2014
Page 5
QuickSpecs
HP 5820 Switch Series
Overview
Electronic and telephone support
limited electronic and telephone support is available from HP; to reach our support centers, refer to
www.hp.com/networking/contact-support; for details on the duration of support provided with your product purchase, refer to
www.hp.com/networking/warrantysummary
Software releases
to find software for your product, refer to www.hp.com/networking/support; for details on the software releases available with
your product purchase, refer to www.hp.com/networking/warrantysummary
DA - 13791 North America — Version 21 — March 19, 2014
Page 6
QuickSpecs
HP 5820 Switch Series
Configuration
Build To Order: BTO is a standalone unit with no integration. BTO products ship standalone are not part of a CTO or RackShippable solution.
Standard Switch Chassis
HP 5820-14XG-SFP+ Switch with 2 Slots
4 RJ-45 autosensing 10/100/1000 ports
2 module slots
14 fixed 1000/10000 SFP+ ports
min=0 \ max=14 SFP+ Transceivers
1 Power Supply Required
2U - Height
JC106A
See
Configuration
Note:1
HP 5820-24XG-SFP+ Switch
4 RJ-45 autosensing 10/100/1000 ports
24 fixed 1000/10000 SFP+ ports
min=0 \ max=24 SFP+ Transceivers
1 Power Supply Required
1U - Height
JC102A
See
Configuration
Note:1
HP 5820AF-24XG Switch
4 RJ-45 autosensing 10/100/1000 ports
24 fixed 1000/10000 SFP+ ports
min=0 \ max=24 SFP+ Transceivers
1 Power Supply Required
2 Fan Trays Required
1U - Height
JG219A
See
Configuration
Note:1
Configuration Rules:
Note 1
The following Transceivers install into this Switch (Max = 14 or 24 depending on Switch) (Use #0D1 or #B01 if
switch is CTO):
HP X130 10G SFP+ LC SR Transceiver
JD092B
HP X130 10G SFP+ LC LRM Transceiver
JD093B
HP X130 10G SFP+ LC LR Transceiver
JD094B
HP X130 10G SFP+ LC ER 40km Transceiver
JG234A
HP X240 10G SFP+ to SFP+ 0.65m Direct Attach Copper Cable
JD095C
HP X240 10G SFP+ to SFP+ 1.2m Direct Attach Copper Cable
JD096C
HP X240 10G SFP+ to SFP+ 3m Direct Attach Copper Cable
JD097C
HP X240 10G SFP+ to SFP+ 5m Direct Attach Copper Cable
JG081C
HP X125 1G SFP LC LH40 1310nm Transceiver
JD061A
HP X120 1G SFP LC LH40 1550nm Transceiver
JD062A
HP X125 1G SFP LC LH70 Transceiver
JD063B
HP X120 1G SFP LC SX Transceiver
JD118B
HP X120 1G SFP LC LX Transceiver
JD119B
HP X120 1G SFP RJ45 T Transceiver
JD089B
DA - 13791 North America — Version 21 — March 19, 2014
Page 7
QuickSpecs
HP 5820 Switch Series
Configuration
Box Level Integration CTO Models
CTO Solution Sku
HP 58xx CTO Switch Solution
SSP trigger sku
JG478A
CTO Base Sku
HP 5820-14XG-SFP+ w/2 Slots CTO Switch
4 RJ-45 autosensing 10/100/1000 ports
2 module slots
14 fixed 1000/10000 SFP+ ports
min=0 \ max=14 SFP+ Transceivers
1 Power Supply Required
2U - Height
JC106AC
See
Configuration
Note:1,4
HP 5820-24XG-SFP+ CTO Switch
4 RJ-45 autosensing 10/100/1000 ports
24 fixed 1000/10000 SFP+ ports
min=0 \ max=24 SFP+ Transceivers
1 Power Supply Required
1U - Height
JC102AC
See
Configuration
Note:1,4
HP 5820AF-24XG Switch
4 RJ-45 autosensing 10/100/1000 ports
24 fixed 1000/10000 SFP+ ports (min=0 \ max=24 SFP+ Transceivers)
1 Power Supply Required
2 Fan Trays Required
1U - Height
JG219A
See
Configuration
Note:1, 4
Configuration Rules:
Note 1
The following Transceivers install into this Switch (Max = 14 or 24 depending on Switch): (Use #0D1 if switch
is CTO)
HP X130 10G SFP+ LC SR Transceiver
JD092B
HP X130 10G SFP+ LC LRM Transceiver
JD093B
HP X130 10G SFP+ LC LR Transceiver
JD094B
HP X130 10G SFP+ LC ER 40km Transceiver
JG234A
HP X240 10G SFP+ to SFP+ 0.65m Direct Attach Copper Cable
JD095C
HP X240 10G SFP+ to SFP+ 1.2m Direct Attach Copper Cable
JD096C
HP X240 10G SFP+ to SFP+ 3m Direct Attach Copper Cable
JD097C
HP X240 10G SFP+ to SFP+ 5m Direct Attach Copper Cable
JG081C
HP X125 1G SFP LC LH40 1310nm Transceiver
JD061A
HP X120 1G SFP LC LH40 1550nm Transceiver
JD062A
DA - 13791 North America — Version 21 — March 19, 2014
Page 8
QuickSpecs
HP 5820 Switch Series
Configuration
HP X125 1G SFP LC LH70 Transceiver
HP X120 1G SFP LC SX Transceiver
HP X120 1G SFP LC LX Transceiver
HP X120 1G SFP RJ45 T Transceiver
Note 4
JD063B
JD118B
JD119B
JD089B
If the Switch Chassis is to be Box Level Factory Integrated (CTO), Then the #0D1 is required on the Switch
Chassis and integrated to the JG478A - HP 58xx CTO Enablement. (Max 1 switch per SSP)
Rack Level Integration CTO Models
Standard Switch Chassis
HP 5820-14XG-SFP+ Switch with 2 Slots
4 RJ-45 autosensing 10/100/1000 ports
2 module slots
14 fixed 1000/10000 SFP+ ports
min=0 \ max=14 SFP+ Transceivers
1 Power Supply Required
2U - Height
JC106A
See
Configuration
Note:1, 11
HP 5820-24XG-SFP+ Switch
4 RJ-45 autosensing 10/100/1000 ports
24 fixed 1000/10000 SFP+ ports
min=0 \ max=24 SFP+ Transceivers
1 Power Supply Required
1U - Height
JC102A
See
Configuration
Note:1, 11
HP 5820AF-24XG Switch
4 RJ-45 autosensing 10/100/1000 ports
24 fixed 1000/10000 SFP+ ports (min=0 \ max=24 SFP+ Transceivers)
1 Power Supply Required
2 Fan Trays Required
1U - Height
JG219A
See
Configuration
Note:1, 4, 11
Configuration Rules:
Note 1
The following Transceivers install into this Switch (Max = 14 or 24 depending on Switch):
HP X130 10G SFP+ LC SR Transceiver
HP X130 10G SFP+ LC LRM Transceiver
HP X130 10G SFP+ LC LR Transceiver
HP X130 10G SFP+ LC ER 40km Transceiver
HP X240 10G SFP+ to SFP+ 0.65m Direct Attach Copper Cable
HP X240 10G SFP+ to SFP+ 1.2m Direct Attach Copper Cable
HP X240 10G SFP+ to SFP+ 3m Direct Attach Copper Cable
HP X240 10G SFP+ to SFP+ 5m Direct Attach Copper Cable
HP X125 1G SFP LC LH40 1310nm Transceiver
DA - 13791 North America — Version 21 — March 19, 2014
JD092B
JD093B
JD094B
JG234A
JD095C
JD096C
JD097C
JG081C
JD061A
Page 9
QuickSpecs
HP 5820 Switch Series
Configuration
HP X120 1G SFP LC LH40 1550nm Transceiver
HP X125 1G SFP LC LH70 Transceiver
HP X120 1G SFP LC SX Transceiver
HP X120 1G SFP LC LX Transceiver
HP X120 1G SFP RJ45 T Transceiver
JD062A
JD063B
JD118B
JD119B
JD089B
Note 4
Switch Height is 2U if the JC682A - HP A58x0AF Bck(pwr)-Frt(ports) Fan Tray is ordered #0D1 with this switch.
REMARK: This only applies for CTO Rack Level Integration.
Note 11
If HP CTO Switch Chassis is selected for Rack Level Integration, Then the Switch needs to integrate (with
#0D1) to the HP Rack.
Enter the following menu selections as integrated to the CTO Model X server above if order is factory built.
Modules
Ethernet Modules
(JC106x and JG259x Switch Only ) System (std 0 // max 2) User Selection (min 0 // max 2) per chassis
HP 5800 4-port 10GbE SFP+ Module
min=0 \ max=4 SFP + Transceivers
JC091A
See
Configuration
Note:1
HP 5800 2-port 10GbE SFP+ Module
min=0 \ max=2 SFP + Transceivers
JC092B
See
Configuration
Note:1
HP 5820 4-port 8/4/2 Gbps FCoE SFP+ Mod
min=0 \ max=4 SFP + Transceivers
JC530A
See
Configuration
Note:1
Configuration Rules:
Note 1
The following Transceivers install into this Module: (Use #0D1 or #B01 if switch is CTO)
HP X130 10G SFP+ LC SR Transceiver
HP X130 10G SFP+ LC LRM Transceiver
HP X130 10G SFP+ LC LR Transceiver
HP X130 10G SFP+ LC ER 40km Transceiver
HP X240 10G SFP+ to SFP+ 0.65m Direct Attach Copper Cable
HP X240 10G SFP+ to SFP+ 1.2m Direct Attach Copper Cable
HP X240 10G SFP+ to SFP+ 3m Direct Attach Copper Cable
HP X240 10G SFP+ to SFP+ 5m Direct Attach Copper Cable
DA - 13791 North America — Version 21 — March 19, 2014
JD092B
JD093B
JD094B
JG234A
JD095C
JD096C
JD097C
JG081C
Page 10
QuickSpecs
HP 5820 Switch Series
Configuration
Access Control Modules
(JC106x and JG259x Switch Only ) System (std 0 // max 1) User Selection (min 0 // max 1) per chassis
HP A5800 Access Controller Module for 32-64 Aps
No Transceivers
JD443A
HP 5820 VPN Firewall Module
No Transceivers
JD255A
Configuration Rules:
Note 1
This Module install to the following switches only:
JC106x - HP 5820-14XG-SFP+ Switch with 2 Slots
Transceivers
SFP+ Transceivers
HP X130 10G SFP+ LC SR Transceiver
HP X130 10G SFP+ LC LRM Transceiver
HP X130 10G SFP+ LC LR Transceiver
HP X130 10G SFP+ LC ER 40km Transceiver
HP X240 10G SFP+ SFP+ 0.65m DAC Cable
HP X240 10G SFP+ SFP+ 1.2m DAC Cable
HP X240 10G SFP+ SFP+ 3m DAC Cable
HP X240 10G SFP+ SFP+ 5m DAC Cable
JD092B
JD093B
JD094B
JG234A
JD095C#B01
JD096C#B01
JD097C#B01
JG081C#B01
SFP Transceivers
HP X125 1G SFP LC LH40 1310nm XCVR
HP X120 1G SFP LC LH40 1550nm XCVR
HP X120 1G SFP LC SX Transceiver
HP X120 1G SFP LC LX Transceiver
HP X125 1G SFP LC LH70 Transceiver
HP X120 1G SFP RJ45 T Transceiver
JD061A
JD062A
JD118B
JD119B
JD063B
JD089B
Internal Power Supplies
System (std 0 // max 2) User Selection (min 1 // max 2) per switch enclosure
HP A5800 300W DC Power Supply
JC090A
DA - 13791 North America — Version 21 — March 19, 2014
Page 11
QuickSpecs
HP 5820 Switch Series
Configuration
See
Configuration
Note:1, 2
HP A5800 300W AC Power Supply
includes 1 x c13, 300w
JC087A
See
Configuration
Note:1, 2, 3, 4
PDU Cable NA/MEX/TW/JP
C15 PDU Jumper Cord (NA/MEX/TW/JP)
JC087A#B2B
PDU Cable ROW
C15 PDU Jumper Cord (ROW)
JC087A#B2C
HP A58x0AF 650W AC Power Supply
includes 1 x c13, 650w
JC680A
See
Configuration
Note:1, 3, 5
PDU Cable NA/MEX/TW/JP
C15 PDU Jumper Cord (NA/MEX/TW/JP)
JC680A#B2B
PDU Cable ROW
C15 PDU Jumper Cord (ROW)
JC680A#B2C
HP 58x0AF 650W DC Power Supply
JC681A
See
Configuration
Note:1, 5
Configuration Rules:
Note 1
If 2 power supplies are selected they must be the same Sku number.
Note 2
Supported only on the JC102x, JC106x, JG243x, and JG259x Switches
Note 3
Localization required on orders without #B2B or #B2C options.
Note 4
Localization (Wall Power Cord) required on orders without #B2B, #B2C (PDU Power Cord) .
(See Localization Menu)
REMARK: When Switches/Routers are Factory Racked, Then #B2B, or #B2C should be the
Defaulted Power Cable option on the Switches/Routers.
Note 5
Supported only on the JG219A Switch
Remarks:
DA - 13791 North America — Version 21 — March 19, 2014
Page 12
QuickSpecs
HP 5820 Switch Series
Configuration
Drop down under power supply should offer the following options and results:
Switch/Router/Power Supply to PDU Power Cord - #B2B in North America, Mexico, Taiwan,
and Japan or #B2C ROW. (Watson Default B2B or B2C for Rack Level CTO)
Switch/Router/Power Supply to Wall Power Cord - Localized Option (Watson Default for
BTO and Box Level CTO)
Switch Options
Fan Trays
(JG219A only) System (std 0 // max 2) User Selection (min 2 // max 2) per switch
HP 58x0AF Bck(pwr)-Frt(ports) Fan Tray
JC682A
See
Configuration
Note:1
HP 58x0AF Frt(ports)-Bck(pwr) Fan Tray
JC683A
See
Configuration
Note:1
Configuration Rules:
Note 1
Fan Trays cannot be mixed in the same switch enclosure
Remarks:
Watson Blue Text:
If there is any empty space below the switch in a rack when using Back to Front Fan Trays,
JC682A, the rack will receive an Air Plenum kit that takes up 1U of additional space in the
rack. The Air Plenum kit is not required on fully configured racks. This only applies for CTO
Rack Level Integration. The Air Plenum Kit is a non-saleable SKU, and is brought in
automatically for CTO Factory Rack Level Integration.
DA - 13791 North America — Version 21 — March 19, 2014
Page 13
QuickSpecs
HP 5820 Switch Series
Configuration AF Model
Build To Order: BTO is a standalone unit with no integration. BTO products ship standalone are not part of a CTO or RackShippable solution.
Standard Switch Chassis
HP 5820AF-24XG Switch
4 RJ-45 autosensing 10/100/1000 ports
24 fixed 1000/10000 SFP+ ports
min=0 \ max=24 SFP+ Transceivers
1 Power Supply Required
2 Fan Trays Required
1U - Height
JG219A
See Configuration
Note:1
Configuration Rules:
Note 1
The following Transceivers install into this Module (Max = 24 depending on Switch):
HP X130 10G SFP+ LC SR Transceiver
HP X130 10G SFP+ LC LRM Transceiver
HP X130 10G SFP+ LC LR Transceiver
HP X130 10G SFP+ LC ER 40km Transceiver
HP X240 10G SFP+ to SFP+ 0.65m Direct Attach Copper Cable
HP X240 10G SFP+ to SFP+ 1.2m Direct Attach Copper Cable
HP X240 10G SFP+ to SFP+ 3m Direct Attach Copper Cable
HP X240 10G SFP+ to SFP+ 5m Direct Attach Copper Cable
HP X240 10G SFP+ SFP+ 7m Direct Attach Copper Cable
HP X125 1G SFP LC LH40 1310nm Transceiver
HP X120 1G SFP LC LH40 1550nm Transceiver
HP X125 1G SFP LC LH70 Transceiver
HP X120 1G SFP LC SX Transceiver
HP X120 1G SFP LC LX Transceiver
HP X120 1G SFP RJ45 T Transceiver
JD092B
JD093B
JD094B
JG234A
JD095C
JD096C
JD097C
JG081C
JC784C
JD061A
JD062A
JD063B
JD118B
JD119B
JD089B
Box Level Integration CTO Models
CTO Solution Sku
HP 58xx CTO Switch Solution
SSP trigger sku
JG478A
CTO Switch Chassis
HP 5820AF-24XG Switch
JG219A
DA - 13791 North America — Version 21 — March 19, 2014
Page 14
QuickSpecs
HP 5820 Switch Series
Configuration AF Model
4 RJ-45 autosensing 10/100/1000 ports
24 fixed 1000/10000 SFP+ ports (min=0 \ max=24 SFP+ Transceivers)
1 Power Supply Required
2 Fan Trays Required
1U - Height
See Configuration
Note:1, 10
Configuration Rules:
Note 1
The following Transceivers install into this Switch: (Use #0D1 or #B01 quoted to switch if switch is CTO) - if
applicable
HP X130 10G SFP+ LC SR Transceiver
JD092B
HP X130 10G SFP+ LC LRM Transceiver
JD093B
HP X130 10G SFP+ LC LR Transceiver
JD094B
HP X130 10G SFP+ LC ER 40km Transceiver
JG234A
HP X240 10G SFP+ to SFP+ 0.65m Direct Attach Copper Cable
JD095C
HP X240 10G SFP+ to SFP+ 1.2m Direct Attach Copper Cable
JD096C
HP X240 10G SFP+ to SFP+ 3m Direct Attach Copper Cable
JD097C
HP X240 10G SFP+ to SFP+ 5m Direct Attach Copper Cable
JG081C
HP X240 10G SFP+ SFP+ 7m Direct Attach Copper Cable
JC784C
HP X125 1G SFP LC LH40 1310nm Transceiver
JD061A
HP X120 1G SFP LC LH40 1550nm Transceiver
JD062A
HP X125 1G SFP LC LH70 Transceiver
JD063B
HP X120 1G SFP LC SX Transceiver
JD118B
HP X120 1G SFP LC LX Transceiver
JD119B
HP X120 1G SFP RJ45 T Transceiver
JD089B
Note 10
If the Switch Chassis is to be Box Level Factory Integrated (CTO), Then the #0D1 is required on the Switch
Chassis and integrated to the JG478A - HP 58xx CTO Enablement. (Min 1/Max 1 Switch per SSP)
Rack Level Integration CTO Models
CTO Switch Chassis
HP 5820AF-24XG Switch
4 RJ-45 autosensing 10/100/1000 ports
24 fixed 1000/10000 SFP+ ports (min=0 \ max=24 SFP+ Transceivers)
1 Power Supply Required
2 Fan Trays Required
1U - Height
JG219A
See Configuration
Note:1, 4, 11
Configuration Rules:
Note 1
The following Transceivers install into this Switch: (Use #0D1 or #B01 quoted to switch if switch is CTO) - if
applicable
HP X130 10G SFP+ LC SR Transceiver
JD092B
HP X130 10G SFP+ LC LRM Transceiver
JD093B
DA - 13791 North America — Version 21 — March 19, 2014
Page 15
QuickSpecs
HP 5820 Switch Series
Configuration AF Model
HP X130 10G SFP+ LC LR Transceiver
HP X130 10G SFP+ LC ER 40km Transceiver
HP X240 10G SFP+ to SFP+ 0.65m Direct Attach Copper Cable
HP X240 10G SFP+ to SFP+ 1.2m Direct Attach Copper Cable
HP X240 10G SFP+ to SFP+ 3m Direct Attach Copper Cable
HP X240 10G SFP+ to SFP+ 5m Direct Attach Copper Cable
HP X240 10G SFP+ SFP+ 7m Direct Attach Copper Cable
HP X125 1G SFP LC LH40 1310nm Transceiver
HP X120 1G SFP LC LH40 1550nm Transceiver
HP X125 1G SFP LC LH70 Transceiver
HP X120 1G SFP LC SX Transceiver
HP X120 1G SFP LC LX Transceiver
HP X120 1G SFP RJ45 T Transceiver
JD094B
JG234A
JD095C
JD096C
JD097C
JG081C
JC784C
JD061A
JD062A
JD063B
JD118B
JD119B
JD089B
Note 4
Switch Height is 2U if the JC682A - HP A58x0AF Bck(pwr)-Frt(ports) Fan Tray is ordered #0D1 with this
switch.
REMARK: This only applies for CTO Rack Level Integration.
Note 11
If HP CTO Switch Chassis is selected for Rack Level Integration, Then the JG219A - HP 5820AF-24XG Switch
needs to integrate (with #0D1) to the HP Rack.
Enter the following menu selections as integrated to the CTO Model X server above if order is factory built.
Transceivers
SFP+ Transceivers
HP X130 10G SFP+ LC SR Transceiver
HP X130 10G SFP+ LC LRM Transceiver
HP X130 10G SFP+ LC LR Transceiver
HP X130 10G SFP+ LC ER 40km Transceiver
HP X240 10G SFP+ SFP+ 0.65m DAC Cable
HP X240 10G SFP+ SFP+ 1.2m DAC Cable
HP X240 10G SFP+ SFP+ 3m DAC Cable
HP X240 10G SFP+ SFP+ 5m DAC Cable
HP X240 10G SFP+ 7m DAC Cable
JD092B
JD093B
JD094B
JG234A
JD095C#B01
JD096C#B01
JD097C#B01
JG081C#B01
JC784C#B01
SFP Transceivers
HP X125 1G SFP LC LH40 1310nm XCVR
HP X120 1G SFP LC LH40 1550nm XCVR
HP X120 1G SFP LC SX Transceiver
HP X120 1G SFP LC LX Transceiver
HP X125 1G SFP LC LH70 Transceiver
HP X120 1G SFP RJ45 T Transceiver
DA - 13791 North America — Version 21 — March 19, 2014
JD061A
JD062A
JD118B
JD119B
JD063B
JD089B
Page 16
QuickSpecs
HP 5820 Switch Series
Configuration AF Model
Internal Power Supplies
(JG219A only) System (std 0 // max 2) User Selection (min 1 // max 2) per switch enclosure
HP A58x0AF 650W AC Power Supply
includes 1 x c13, 650w
JC680A
See Configuration
Note:1, 2
PDU Cable NA/MEX/TW/JP
C15 PDU Jumper Cord (NA/MEX/TW/JP)
#B2B
PDU Cable ROW
C15 PDU Jumper Cord (ROW)
#B2C
HP 58x0AF 650W DC Power Supply
JC681A
See Configuration
Note:1
Configuration Rules:
Note 1
If 2 power supplies are selected they must be the same Sku number.
Note 2
Localization (Wall Power Cord) required on orders without #B2B, #B2C (PDU Power Cord) . (See Localization
Menu)
REMARK: When Switches/Routers are Factory Racked, Then #B2B, or #B2C should be the Defaulted Power
Cable option on the Switches/Routers.
Remarks:
Drop down under power supply should offer the following options and results:
Switch/Router/Power Supply to PDU Power Cord - #B2B in North America, Mexico, Taiwan, and Japan or
#B2C ROW. (Watson Default B2B or B2C for Rack Level CTO)
Switch/Router/Power Supply to Wall Power Cord - Localized Option (Watson Default for BTO and Box Level
CTO)
Switch Options
Fan Trays
(JG219A only) System (std 0 // max 2) User Selection (min 2 // max 2) per switch
HP 58x0AF Bck(pwr)-Frt(ports) Fan Tray
JC682A
See Configuration
Note:1, 2
HP 58x0AF Frt(ports)-Bck(pwr) Fan Tray
JC683A
DA - 13791 North America — Version 21 — March 19, 2014
Page 17
QuickSpecs
HP 5820 Switch Series
Configuration AF Model
See Configuration
Note:1
Configuration Rules:
Note 1
Fan Trays cannot be mixed in the same switch enclosure
Note 2
This Fan Tray requires an Air Plenum kit for better air flow. The Air Plenum kit requires 1U of additional space
in the rack.
REMARK: This only applies for CTO Rack Level Integration. The Air Plenum Kit is a non-saleable SKU, and is
brought in automatically in the factory for CTO Rack Level Integration)
External Redundant Power Supplies
HP RPS1600 Redundant Power System
Height = 1U
includes 1 x c13, 1600w and Power Supply port
JG136A
See Configuration
Note:2, 3, 5
HP RPS1600 1600W AC Power Supply
Installs into JG136A only
JG137A
See Configuration
Note:1, 3
Configuration Rules:
Note 1
If this power supply is selected, The JG136A - HP A-RPS1600 Redundant Power System must be on order or
onsite.
Note 2
Localization required.
Note 3
Each switch will only support 1 JG136A and 1 JG137A Power supply systems.
Note 5
This power supply only supported on switches JC102A and JC106A.
Options for the HP RPS1600 Redundant Power System
HP X290 1000 A JD5 2m RPS Cable
JD187A
See Configuration
Note: 3
HP X290 1000 B JD5 2m RPS Cable
JD189A
See Configuration
Note: 4
Configuration Rules:
Note 3
This Cable is only supported on switches JC102A and, JC106A when used with the RPS 1600 (JG136A).
DA - 13791 North America — Version 21 — March 19, 2014
Page 18
QuickSpecs
HP 5820 Switch Series
Configuration AF Model
Note 4
This Cable is only supported on switches JC102A and JC106A when used with the RPS 1600 (JG136A).
Remarks:
These cables are used to connect the External Power System to Switch.
DA - 13791 North America — Version 21 — March 19, 2014
Page 19
QuickSpecs
HP 5820 Switch Series
Technical Specifications
HP 5820-14XG-SFP+ Switch with 2 Slots (JC106A)
Ports
Power supplies
Fan tray
Physical characteristics
14 SFP+ 10-GbE ports; Duplex: full only
2 extended module slots
1 open module slot
4 RJ-45 auto-negotiating 10/100/1000 ports (IEEE 802.3 Type 10BASE-T, IEEE 802.3u Type 100BASE-TX,
IEEE 802.3ab Type 1000BASE-T)
1 RJ-45 serial console port
Supports a maximum of 14 SFP+ ports plus 8 8/4/2 Gbps Fibre Channel SFP+ ports, with optional module
2 power-supply slots
1 minimum power-supplies required (ordered separately)
includes: 1 x JC096A
1 fan tray slot
Base product includes fan tray
Dimensions
17.32(w) x 18.39(d) x 3.39(h) in (43.99 x 46.7 x 8.61 cm) (2U height)
Weight
33.29 lb (15.1 kg)
Memory and processor
1024 MB SDRAM, 512 MB flash; packet buffer size: 2 MB
Performance
Latency
2.02 µs (Cut Through) 2.02 µs, (Store and Forward) (64-byte packets)
Throughput
up to 363 million pps (64-byte packets)
Routing/Switching
capacity
488 Gbps
Routing table size
12000 entries
MAC address table size
32000 entries
Operating temperature
32°F to 113°F (0°C to 45°C)
Operating relative
humidity
10% to 90%, noncondensing
Acoustic
Low-speed fan: 44.3 dB, High-speed fan: 54.1 dB
Environment
Electrical characteristics Maximum heat
dissipation
Safety
Emissions
Immunity
836 BTU/hr (881.98 kJ/hr)
Voltage
100-120/200-240 VAC
DC voltage
300 W DC: –48 VDC to –60 VDC
Frequency
50/60 Hz
UL 60950-1; EN 60825-1 Safety of Laser Products-Part 1; EN 60825-2 Safety of Laser Products-Part 2; IEC
60950-1; CAN/CSA-C22.2 No. 60950-1; Anatel; ULAR; GOST; EN 60950-1/A11; FDA 21 CFR Subchapter J;
NOM; ROHS Compliance
VCCI Class A; EN 55022 Class A; ICES-003 Class A; ANSI C63.4 2003; AS/NZS CISPR 22 Class A; EN
61000-3-2:2006; EN 61000-3-3:1995 +A1:2001+A2:2005; EMC Directive 2004/108/EC; FCC (CFR 47, Part
15) Class A
Generic
ETSI EN 300 386 V1.3.3
EN
EN 55024:1998+ A1:2001 + A2:2003
ESD
EN 61000-4-2; IEC 61000-4-2
Radiated
EN 61000-4-3; IEC 61000-4-3
DA - 13791 North America — Version 21 — March 19, 2014
Page 20
QuickSpecs
HP 5820 Switch Series
Technical Specifications
Management
Notes
Services
EFT/Burst
EN 61000-4-4; IEC 61000-4-4
Surge
EN 61000-4-5; IEC 61000-4-5
Conducted
EN 61000-4-6; IEC 61000-4-6
Power frequency
magnetic field
IEC 61000-4-8; EN 61000-4-8
Voltage dips and
interruptions
EN 61000-4-11; IEC 61000-4-11
Harmonics
EN 61000-3-2, IEC 61000-3-2
Flicker
EN 61000-3-3, IEC 61000-3-3
IMC - Intelligent Management Center; command-line interface; Web browser; SNMP Manager; Telnet;
HTTPS; RMON1; FTP
The customer must order a power supply, as the device does not come with a PSU. At least one JC087A or
JC090A is required.
3-year, parts only, global next-day advance exchange (UY832E)
3-year, 4-hour onsite, 13x5 coverage for hardware (UV894E)
3-year, 4-hour onsite, 24x7 coverage for hardware (UV897E)
3-year, 4-hour onsite, 24x7 coverage for hardware, 24x7 SW phone support and SW updates (UV900E)
3-year, 24x7 SW phone support, software updates (UV903E)
Installation with minimum configuration, system-based pricing (UW451E)
4-year, 4-hour onsite, 13x5 coverage for hardware (UV895E)
4-year, 4-hour onsite, 24x7 coverage for hardware (UV898E)
4-year, 4-hour onsite, 24x7 coverage for hardware, 24x7 software phone (UV901E)
4-year, 24x7 SW phone support, software updates (UV904E)
5-year, 4-hour onsite, 13x5 coverage for hardware (UV896E)
5-year, 4-hour onsite, 24x7 coverage for hardware (UV899E)
5-year, 4-hour onsite, 24x7 coverage for hardware, 24x7 software phone (UV902E)
5-year, 24x7 SW phone support, software updates (UV905E)
3 Yr 6 hr Call-to-Repair Onsite (UW972E)
4 Yr 6 hr Call-to-Repair Onsite (UW973E)
5 Yr 6 hr Call-to-Repair Onsite (UW974E)
1-year, 4-hour onsite, 13x5 coverage for hardware (HR559E)
1-year, 4-hour onsite, 24x7 coverage for hardware (HR560E)
1-year, 6 hour Call-To-Repair Onsite for hardware (HR563E)
1-year, 24x7 software phone support, software updates (HR562E)
1-year, 4-hour onsite, 24x7 coverage for hardware, 24x7 software phone support and software updates
(HR561E)
1-year, 24x7 software phone support, software updates + Next Business Day Hardware Exchange
(U4D06E)
1-year, 24x7 software phone support, software updates + 4 hour hardware exchange (U0S83E)
3-year, 24x7 software phone support, software updates + Next Business Day Hardware Exchange
(U4D57E)
3-year, 24x7 software phone support, software updates + 4 hour Hardware Exchange (U0T34E)
4-year, 24x7 software phone support, software updates + Next Business Day Hardware Exchange
(U4E08E)
4-year, 24x7 software phone support, software updates + 4 hour Hardware Exchange (U0T85E)
5-year, 24x7 software phone support, software updates + Next Business Day Hardware Exchange
(U0S32E)
5-year, 24x7 software phone support, software updates + 4 hour Hardware Exchange (U0U36E)
DA - 13791 North America — Version 21 — March 19, 2014
Page 21
QuickSpecs
HP 5820 Switch Series
Technical Specifications
Refer to the HP website at: www.hp.com/networking/services for details on the service-level descriptions
and product numbers. For details about services and response times in your area, please contact your local
HP sales office.
HP 5820X-24XG-SFP+ Switch (JC102A)
Ports
24 SFP+ 10-GbE ports; Duplex: full only
4 RJ-45 auto-negotiating 10/100/1000 ports (IEEE 802.3 Type 10BASE-T, IEEE 802.3u Type 100BASE-TX,
IEEE 802.3ab Type 1000BASE-T
1 RJ-45 serial console port
Supports a maximum of 24 SFP+ ports plus 4 autosensing 10/100/1000 ports
Power supplies
2 power-supply slots
1 minimum power-supplies required (ordered separately)
includes: 1 x JC098A
1 fan tray slot
Base product includes fan tray
Dimensions
17.32(w) x 16.81(d) x 1.73(h) in (44.0 x 42.7 x 4.4 cm) (1U height)
Fan tray
Physical characteristics
Weight
18.74 lb (8.5 kg)
Memory and processor
1024 MB SDRAM, 512 MB flash; packet buffer size: 2 M
Performance
Latency
2.02 µs (Cut Through) 2.02 µs, (Store and Forward) (64-byte packets)
Throughput
up to 363 million pps (64-byte packets)
Routing/Switching
capacity
488 Gbps
Routing table size
12000 entries
MAC address table size
32000 entries
Operating temperature
32°F to 113°F (0°C to 45°C)
Operating relative
humidity
10% to 90%, noncondensing
Acoustic
Low-speed fan: 48.4 dB, High-speed fan: 59.7 dB
Environment
Electrical characteristics Maximum heat
dissipation
Safety
Emissions
Immunity
631 BTU/hr (665.71 kJ/hr)
Voltage
100-120/200-240 VAC
DC voltage
300 W DC: –48 VDC to –60 VDC
Frequency
50/60 Hz
UL 60950-1; EN 60825-1 Safety of Laser Products-Part 1; EN 60825-2 Safety of Laser Products-Part 2; IEC
60950-1; CAN/CSA-C22.2 No. 60950-1; Anatel; ULAR; GOST; EN 60950-1/A11; FDA 21 CFR Subchapter J;
NOM; ROHS Compliance
VCCI Class A; EN 55022 Class A; ICES-003 Class A; ANSI C63.4 2003; AS/NZS CISPR 22 Class A; EN
61000-3-2:2006; EN 61000-3-3:1995 +A1:2001+A2:2005; EMC Directive 2004/108/EC; FCC (CFR 47, Part
15) Class A
Generic
ETSI EN 300 386 V1.3.3
EN
EN 55024:1998+ A1:2001 + A2:2003
DA - 13791 North America — Version 21 — March 19, 2014
Page 22
QuickSpecs
HP 5820 Switch Series
Technical Specifications
Management
Notes
Services
ESD
EN 61000-4-2; IEC 61000-4-2
Radiated
EN 61000-4-3; IEC 61000-4-3
EFT/Burst
EN 61000-4-4; IEC 61000-4-4
Surge
EN 61000-4-5; IEC 61000-4-5
Conducted
EN 61000-4-6; IEC 61000-4-6
Power frequency
magnetic field
IEC 61000-4-8; EN 61000-4-8
Voltage dips and
interruptions
EN 61000-4-11; IEC 61000-4-11
Harmonics
EN 61000-3-2, IEC 61000-3-2
Flicker
EN 61000-3-3, IEC 61000-3-3
IMC - Intelligent Management Center; command-line interface; Web browser; SNMP Manager; Telnet;
HTTPS; RMON1; FTP
The customer must order a power supply, as the device does not come with a PSU. At least one JC087A or
JC090A is required.
3-year, parts only, global next-day advance exchange (UY832E)
3-year, 4-hour onsite, 13x5 coverage for hardware (UV894E)
3-year, 4-hour onsite, 24x7 coverage for hardware (UV897E)
3-year, 4-hour onsite, 24x7 coverage for hardware, 24x7 SW phone support and SW updates (UV900E)
3-year, 24x7 SW phone support, software updates (UV903E)
Installation with minimum configuration, system-based pricing (UW451E)
4-year, 4-hour onsite, 13x5 coverage for hardware (UV895E)
4-year, 4-hour onsite, 24x7 coverage for hardware (UV898E)
4-year, 4-hour onsite, 24x7 coverage for hardware, 24x7 software phone (UV901E)
4-year, 24x7 SW phone support, software updates (UV904E)
5-year, 4-hour onsite, 13x5 coverage for hardware (UV896E)
5-year, 4-hour onsite, 24x7 coverage for hardware (UV899E)
5-year, 4-hour onsite, 24x7 coverage for hardware, 24x7 software phone (UV902E)
5-year, 24x7 SW phone support, software updates (UV905E)
3 Yr 6 hr Call-to-Repair Onsite (UW972E)
4 Yr 6 hr Call-to-Repair Onsite (UW973E)
5 Yr 6 hr Call-to-Repair Onsite (UW974E)
1-year, 4-hour onsite, 13x5 coverage for hardware (HR559E)
1-year, 4-hour onsite, 24x7 coverage for hardware (HR560E)
1-year, 6 hour Call-To-Repair Onsite for hardware (HR563E)
1-year, 24x7 software phone support, software updates (HR562E)
1-year, 4-hour onsite, 24x7 coverage for hardware, 24x7 software phone support and software updates
(HR561E)
1-year, 24x7 software phone support, software updates + Next Business Day Hardware Exchange
(U4D06E)
1-year, 24x7 software phone support, software updates + 4 hour hardware exchange (U0S83E)
3-year, 24x7 software phone support, software updates + Next Business Day Hardware Exchange
(U4D57E)
3-year, 24x7 software phone support, software updates + 4 hour Hardware Exchange (U0T34E)
4-year, 24x7 software phone support, software updates + Next Business Day Hardware Exchange
(U4E08E)
4-year, 24x7 software phone support, software updates + 4 hour Hardware Exchange (U0T85E)
DA - 13791 North America — Version 21 — March 19, 2014
Page 23
QuickSpecs
HP 5820 Switch Series
Technical Specifications
5-year, 24x7 software phone support, software updates + Next Business Day Hardware Exchange
(U0S32E)
5-year, 24x7 software phone support, software updates + 4 hour Hardware Exchange (U0U36E)
Refer to the HP website at: www.hp.com/networking/services for details on the service-level descriptions
and product numbers. For details about services and response times in your area, please contact your local
HP sales office.
HP 5820AF-24XG Switch (JG219A)
Ports
Power supplies
Fan tray
Physical characteristics
24 fixed 1000/10000 SFP+ ports
2 RJ-45 autosensing 10/100/1000 ports (IEEE 802.3 Type 10BASE-T, IEEE 802.3u Type 100BASE-TX, IEEE
802.3ab Type 1000BASE-T); Duplex: 10BASE-T/100BASE-TX: half or full; 1000BASE-T: full only
1 RJ-45 serial console port
1 RJ-45 out-of-band management port
1 USB 2.0
2 power-supply slots
1 minimum power-supplies required (ordered separately)
2 fan tray slots
The customer must order fan trays, as fan trays are not included with the switch. This system requires two
same-direction airflow fan trays to function properly. The system should not be operated with only one
fan tray for more than 24 hours. The system should not be operated without a fan tray more than two
minutes. The system should not be operated outside of the temperature range of 32°F (0°C) to 113°F
(45°C). Failure to comply with these operating requirements may void the product warranty.
Dimensions
25.98(w) x 17.32(d) x 1.72(h) in (65.99 x 43.99 x 4.37 cm) (1U height)
Weight
22.05 lb (10 kg), Fully loaded
Memory and processor
1024 MB flash, 512 MB SDRAM; packet buffer size: 2 MB
Performance
Latency
3 µs(64-byte packets)
Throughput
360 million pps
Routing/Switching
capacity
484 Gbps
Routing table size
12000 entries
MAC address table size
32000 entries
Operating temperature
32°F to 113°F (0°C to 45°C)
Operating relative
humidity
10% to 90%, noncondensing
Acoustic
Low-speed fan: 60.1 dB, High-speed fan: 69.9 dB
Environment
Electrical characteristics Maximum heat
dissipation
607 BTU/hr (640.39 kJ/hr)
Voltage
100-120/200-240 VAC
DC voltage
650W DC: -36 VDC to -72 VDC
Frequency
50/60 Hz
DA - 13791 North America — Version 21 — March 19, 2014
Page 24
QuickSpecs
HP 5820 Switch Series
Technical Specifications
Safety
Emissions
Immunity
Management
Notes
Services
UL 60950-1; EN 60825-1 Safety of Laser Products-Part 1; EN 60825-2 Safety of Laser Products-Part 2; IEC
60950-1; CAN/CSA-C22.2 No. 60950-1; Anatel; ULAR; GOST; EN 60950-1/A11; FDA 21 CFR Subchapter J;
NOM; ROHS Compliance
VCCI Class A; EN 55022 Class A; ICES-003 Class A; ANSI C63.4 2003; AS/NZS CISPR 22 Class A; EN
61000-3-2:2006; EN 61000-3-3:1995 +A1:2001+A2:2005; EMC Directive 2004/108/EC; FCC (CFR 47, Part
15) Class A
Generic
ETSI EN 300 386 V1.3.3
EN
EN 55024:1998+ A1:2001 + A2:2003
ESD
EN 61000-4-2; IEC 61000-4-2
Radiated
EN 61000-4-3; IEC 61000-4-3
EFT/Burst
EN 61000-4-4; IEC 61000-4-4
Surge
EN 61000-4-5; IEC 61000-4-5
Conducted
EN 61000-4-6; IEC 61000-4-6
Power frequency
magnetic field
IEC 61000-4-8; EN 61000-4-8
Voltage dips and
interruptions
EN 61000-4-11; IEC 61000-4-11
Harmonics
EN 61000-3-2, IEC 61000-3-2
Flicker
EN 61000-3-3, IEC 61000-3-3
IMC - Intelligent Management Center; command-line interface; Web browser; SNMP Manager; Telnet;
HTTPS; RMON1; FTP
The customer must order power supply, as the device does not come with a PSU. At least one JC680A or
JC681A is required
3-year, parts only, global next-day advance exchange (UY832E)
3-year, 4-hour onsite, 13x5 coverage for hardware (UV894E)
3-year, 4-hour onsite, 24x7 coverage for hardware (UV897E)
3-year, 4-hour onsite, 24x7 coverage for hardware, 24x7 SW phone support and SW updates (UV900E)
3-year, 24x7 SW phone support, software updates (UV903E)
4-year, 4-hour onsite, 13x5 coverage for hardware (UV895E)
4-year, 4-hour onsite, 24x7 coverage for hardware (UV898E)
4-year, 4-hour onsite, 24x7 coverage for hardware, 24x7 software phone (UV901E)
4-year, 24x7 SW phone support, software updates (UV904E)
5-year, 4-hour onsite, 13x5 coverage for hardware (UV896E)
5-year, 4-hour onsite, 24x7 coverage for hardware (UV899E)
5-year, 4-hour onsite, 24x7 coverage for hardware, 24x7 software phone (UV902E)
5-year, 24x7 SW phone support, software updates (UV905E)
3 Yr 6 hr Call-to-Repair Onsite (UW972E)
4 Yr 6 hr Call-to-Repair Onsite (UW973E)
5 Yr 6 hr Call-to-Repair Onsite (UW974E)
1-year, 4-hour onsite, 13x5 coverage for hardware (HR559E)
1-year, 4-hour onsite, 24x7 coverage for hardware (HR560E)
1-year, 6 hour Call-To-Repair Onsite for hardware (HR563E)
1-year, 24x7 software phone support, software updates (HR562E)
1-year, 4-hour onsite, 24x7 coverage for hardware, 24x7 software phone support and software updates
(HR561E)
1-year, 24x7 software phone support, software updates + Next Business Day Hardware Exchange
DA - 13791 North America — Version 21 — March 19, 2014
Page 25
QuickSpecs
HP 5820 Switch Series
Technical Specifications
(U4D06E)
1-year, 24x7 software phone support, software updates + 4 hour hardware exchange (U0S83E)
3-year, 24x7 software phone support, software updates + Next Business Day Hardware Exchange
(U4D57E)
3-year, 24x7 software phone support, software updates + 4 hour Hardware Exchange (U0T34E)
4-year, 24x7 software phone support, software updates + Next Business Day Hardware Exchange
(U4E08E)
4-year, 24x7 software phone support, software updates + 4 hour Hardware Exchange (U0T85E)
5-year, 24x7 software phone support, software updates + Next Business Day Hardware Exchange
(U0S32E)
5-year, 24x7 software phone support, software updates + 4 hour Hardware Exchange (U0U36E)
Refer to the HP website at: www.hp.com/networking/services for details on the service-level descriptions
and product numbers. For details about services and response times in your area, please contact your local
HP sales office.
Standards and protocols
(applies to all products in
series)
General protocols
IEEE 802.1ag Service Layer OAM
IEEE 802.1D MAC Bridges
IEEE 802.1p Priority
IEEE 802.1Q VLANs
IEEE 802.1s (MSTP)
IEEE 802.1v VLAN classification by Protocol and Port
IEEE 802.1w Rapid Reconfiguration of Spanning Tree
IEEE 802.3ad Link Aggregation Control Protocol
(LACP)
IEEE 802.3ae 10-Gigabit Ethernet
IEEE 802.3x Flow Control
RFC 768 UDP
RFC 792 ICMP
RFC 793 TCP
RFC 826 ARP
RFC 854 TELNET
RFC 925 Multi-LAN Address Resolution
RFC 951 BOOTP
RFC 1058 RIPv1
RFC 1350 TFTP Protocol (revision 2)
RFC 1519 CIDR
RFC 1542 BOOTP Extensions
RFC 2131 DHCP
RFC 2453 RIPv2
RFC 3046 DHCP Relay Agent Information Option
RFC 3576 Ext to RADIUS (CoA only)
RFC 3768 VRRP
RFC 4675 RADIUS VLAN & Priority
RFC3323 A Privacy Mechanism for the Session
Initiation
Protocol (SIP)
802.1r - GARP Proprietary Attribute Registration
Protocol (GPRP)
IP multicast
RFC 4443 ICMPv6
RFC 4541 IGMP & MLD Snooping Switch
RFC 4861 IPv6 Neighbor Discovery
RFC 4862 IPv6 Stateless Address Auto-configuration
MIBs
IEEE8021-PAE-MIB
IEEE8023-LAG-MIB
RFC 1213 MIB II
RFC 1493 Bridge MIB
RFC 1657 BGP-4 MIB
RFC 1724 RIPv2 MIB
RFC 1850 OSPFv2 MIB
RFC 2011 SNMPv2 MIB for IP
RFC 2013 SNMPv2 MIB for UDP
RFC 2233 Interface MIB
RFC 2273 SNMP-NOTIFICATION-MIB
RFC 2452 IPV6-TCP-MIB
RFC 2454 IPV6-UDP-MIB
RFC 2465 IPv6 MIB
RFC 2466 ICMPv6 MIB
RFC 2571 SNMP Framework MIB
RFC 2572 SNMP-MPD MIB
RFC 2573 SNMP-Notification MIB
RFC 2618 RADIUS Client MIB
RFC 2620 RADIUS Accounting MIB
RFC 2665 Ethernet-Like-MIB
RFC 2674 802.1p and IEEE 802.1Q Bridge MIB
RFC 2688 MAU-MIB
RFC 2787 VRRP MIB
RFC 2819 RMON MIB
RFC 2925 Ping MIB
RFC 3414 SNMP-User based-SM MIB
RFC 3415 SNMP-View based-ACM MIB
RFC 3418 MIB for SNMPv3
RFC 3621 Power Ethernet MIB
DA - 13791 North America — Version 21 — March 19, 2014
Page 26
QuickSpecs
HP 5820 Switch Series
Technical Specifications
RFC 2934 Protocol Independent Multicast MIB for
IPv4
RFC 3376 IGMPv3 (host joins only)
RFC 3618 Multicast Source Discovery Protocol
(MSDP)
RFC 3973 Draft 2 PIM Dense Mode
RFC 4601 Draft 10 PIM Sparse Mode
IPv6
RFC 2080 RIPng for IPv6
RFC 2460 IPv6 Specification
RFC 2710 Multicast Listener Discovery (MLD) for
IPv6
RFC 2740 OSPFv3 for IPv6
RFC 2925 Remote Operations MIB (Ping only)
RFC 3019 MLDv1 MIB
RFC 3162 RADIUS and IPv6
RFC 3315 DHCPv6 (client and relay)
RFC 3315 DHCPv6 (client only)
RFC 3810 MLDv2 (host joins only)
RFC 4022 MIB for TCP
RFC 4251 SSHv6 Architecture
RFC 4252 SSHv6 Authentication
RFC 4253 SSHv6 Transport Layer
RFC 4254 SSHv6 Connection
RFC 4293 MIB for IP
RFC 4419 Key Exchange for SSH
RFC 3826 AES for SNMP's USM MIB
RFC 4133 Entity MIB (Version 3)
LLDP-EXT-DOT1-MIB
LLDP-EXT-DOT3-MIB
LLDP-MIB
Network management
IEEE 802.1AB Link Layer Discovery Protocol (LLDP)
RFC 2819 Four groups of RMON: 1 (statistics), 2
(history), 3 (alarm) and 9 (events)
RFC 3176 sFlow
ANSI/TIA-1057 LLDP Media Endpoint Discovery
(LLDP-MED)
SNMPv1/v2c/v3
OSPF
RFC 2328 OSPFv2
RFC 3101 OSPF NSSA
Security
IEEE 802.1X Port Based Network Access Control
RFC 1492 TACACS+
RFC 2865 RADIUS (client only)
RFC 2866 RADIUS Accounting
Secure Sockets Layer (SSL)
SSHv2 Secure Shell
DA - 13791 North America — Version 21 — March 19, 2014
Page 27
QuickSpecs
HP 5820 Switch Series
Accessories
HP 5820 Switch Series
accessories
Transceivers
HP X124 1G SFP LC LH40 1310nm Transceiver
HP X120 1G SFP LC LH40 1550nm Transceiver
HP X125 1G SFP LC LH70 Transceiver
HP X120 1G SFP RJ45 T Transceiver
HP X120 1G SFP LC SX Transceiver
HP X120 1G SFP LC LX Transceiver
HP X130 SFP+ LC SR Transceiver
HP X130 SFP+ LC LRM Transceiver
HP X130 SFP+ LC LR Transceiver
HP X130 10G SFP+ LC ER 40km Transceiver
HP X240 10G SFP+ to SFP+ 0.65m Direct Attach Copper Cable
HP X240 10G SFP+ to SFP+ 1.2m Direct Attach Copper Cable
HP X240 10G SFP+ to SFP+ 3m Direct Attach Copper Cable
HP X240 10G SFP+ to SFP+ 5m Direct Attach Copper Cable
HP X240 10G SFP+ SFP+ 7m Direct Attach Copper Cable
Power Supply
HP 5800 300W AC Power Supply
HP 5800 300W DC Power Supply
HP RPS1600 Redundant Power System
HP RPS1600 1600W AC Power Supply
Appliance
HP 5820 VPN Firewall Module
HP 5820-14XG-SFP+ Switch with 2 Slots (JC106A)
HP 5820 4-port 8/4/2 Gbps FCoE SFP+ Module
HP 5800 4-port 10GbE SFP+ Module
HP 5800 2-port 10GbE SFP+ Module
HP 5800 2RU Spare Fan Assembly
HP 5820 VPN Firewall Module
HP 5820X-24XG-SFP+ Switch (JC102A)
HP 5800 1RU Spare Fan Assembly
HP 5820AF-24XG Switch (JG219A)
HP 58x0AF 650W AC Power Supply
HP 58x0AF 650W DC Power Supply
HP 58x0AF Back (power side) to Front (port side) Airflow Fan Tray
HP 58x0AF Front (port side) to Back (power side) Airflow Fan Tray
JD061A
JD062A
JD063B
JD089B
JD118B
JD119B
JD092B
JD093B
JD094B
JG234A
JD095C
JD096C
JD097C
JG081C
JC784C
JC087A
JC090A
JG136A
JG137A
JD255A
JC530A
JC091A
JC092B
JC096A
JD255A
JC098A
JC680A
JC681A
JC682A
JC683A
Additional HP Storage Options
Converged Network
Adapters (CNAs)
HP CN1100E Dual Port Converged Network Adapter
HP CN1000E Dual Port Converged Network Adapter
NOTE: Please visit the HP Converged Network Adapter QuickSpecs at:
www.hp.com/go/cna
DA - 13791 North America — Version 21 — March 19, 2014
BK835A
AW520A
Page 28
QuickSpecs
HP 5820 Switch Series
Accessory Product Details
NOTE: Details are not available for all accessories. The following specifications were available at the time of publication.
HP X124 1G SFP LC LH40
1310nm Transceiver
(JD061A)
Ports
Connectivity
1 LC 1000Base-LH port (no IEEE standard exists for 1550 nm optics)
Connector type
LC
Wavelength
1310 nm
Physical characteristics Dimensions
2.17(d) x 0.6(w) x 0.46(h) in. (5.51 x 1.52 x 1.17
A small form-factor
cm)
pluggable SFP Gigabit LH40
Full configuration weight 0.04 lb. (0.02 kg)
transceiver that provides a
full duplex Gigabit solution Electrical characteristics Power consumption typical 0.8 W
Power consumption
1.0 W
up to 40km on a singlemaximum
mode fiber.
Cabling
Cable type:
Single-mode fiber optic, complying with ITU-T G.652;
Maximum distance:
Services
HP X120 1G SFP LC LH40
1550nm Transceiver
(JD062A)
40km distance
Fiber type
Single Mode
Refer to the HP website at www.hp.com/networking/services for details on
the service-level descriptions and product numbers. For details about services
and response times in your area, please contact your local HP sales office.
Ports
Connectivity
1 LC 1000BASE-LH port (no IEEE standard exists for 1550 nm optics)
Connector type
LC
Wavelength
1550 nm
Physical characteristics Dimensions
2.17(d) x 0.6(w) x 0.46(h) in. (5.51 x 1.52 x 1.17
A small form-factor
cm)
pluggable (SFP) Gigabit
Full configuration weight 0.04 lb. (0.02 kg)
LH40 transceiver that
Electrical characteristics Power consumption typical 0.8 W
provides a full-duplex
Power consumption
1.0 W
Gigabit solution up to 40
maximum
km on a single mode fiber.
Cabling
Cable type:
Single-mode fiber optic, complying with ITU-T G.652;
Maximum distance:
Services
40km distance
Fiber type
Single Mode
Refer to the HP website at www.hp.com/networking/services for details on
the service-level descriptions and product numbers. For details about services
and response times in your area, please contact your local HP sales office.
DA - 13791 North America — Version 21 — March 19, 2014
Page 29
QuickSpecs
HP 5820 Switch Series
Accessory Product Details
HP X125 1G SFP LC LH70
Transceiver (JD063B)
A small form-factor
pluggable (SFP) Gigabit
LH70 transceiver that
provides a full-duplex
Gigabit solution up to
70km on a single-mode
fiber.
Ports
1 LC 1000BASE-LH port (no IEEE standard exists for 1550 nm optics)
Connectivity
Connector type
LC
Wavelength
1550 nm
Physical characteristics
2.17(d) x 0.6(w) x 0.46(h) in. (5.51 x 1.52 x 1.17
cm)
Full configuration weight 0.04 lb. (0.02 kg)
Electrical characteristics Power consumption
typical
0.8 W
Power consumption
maximum
1.0 W
Cabling
Cable type:
Single-mode fiber optic, complying with ITU-T G.652;
Services
HP X125 1G SFP RJ45 T
Transceiver (JD089B)
Dimensions
Maximum distance:
• 70km
Fiber type
Single Mode
Refer to the HP website at www.hp.com/networking/services for details on
the service-level descriptions and product numbers. For details about services
and response times in your area, please contact your local HP sales office.
Ports
1 RJ-45 1000BASE-T port (IEEE 802.3ab Type 1000BASE-T)
Connectivity
Connector type
Physical characteristics Dimensions
A small form factor
pluggable (SFP) Gigabit
Full configuration weight
1000Base-T transceiver
that provides a full duplex Electrical characteristics Power consumption
Gigabit solution up to
typical
100m on a Cat-5+ cable.
Power consumption
maximum
Cabling
RJ-45
2.71(d) x 0.54(w) x 0.55(h) in. (6.88 x 1.37 x 1.4
cm)
0.07 lb. (0.03 kg)
0.8 W
1.0 W
Cable type:
1000BASE-T: Category 5 (5E or better recommended), 100 Ù differential 4pair unshielded twisted pair (UTP) or shielded twisted pair (STP) balanced,
complying with IEEE 802.3ab 1000BASE-T;
Services
Maximum distance:
• 100m
Refer to the HP website at: www.hp.com/networking/services for details on
the service-level descriptions and product numbers. For details about services
and response times in your area, please contact your local HP sales office.
DA - 13791 North America — Version 21 — March 19, 2014
Page 30
QuickSpecs
HP 5820 Switch Series
Accessory Product Details
HP X120 1G SFP LC SX
Transceiver (JD118B)
Ports
1 LC 1000BASE-SX port
Connectivity
Connector type
LC
Wavelength
850 nm
A small form-factor
pluggable (SFP) Gigabit SX Physical characteristics
transceiver that provides a
full-duplex Gigabit solution
up to 550m on a Multimode
Electrical characteristics
fiber.
Cabling
Services
HP X120 1G SFP LC LX
Transceiver (JD119B)
Dimensions
2.17(d) x 0.6(w) x 0.46(h) in. (5.51 x 1.52 x 1.17
cm)
Full configuration weight 0.04 lb. (0.02 kg)
Power consumption
typical
0.8 W
Power consumption
maximum
1.0 W
Maximum distance:
• FDDI Grade distance = 220m
• OM1 = 275m
• OM2 = 500m
• OM3 = Not Specified by standard
Cable length
up to 550m
Fiber type
Multi Mode
Refer to the HP website at www.hp.com/networking/services for details on
the service-level descriptions and product numbers. For details about services
and response times in your area, please contact your local HP sales office.
Ports
1 SFP 1000BASE-LX port (IEEE 802.3z Type 1000BASE-LX)
Connectivity
Connector type
LC
Wavelength
1300 nm
A small form-factor
pluggable (SFP) Gigabig LX Physical characteristics
transceiver that provides a
full duplex Gigabit solution
up to 550m on MMF or
Electrical characteristics
10Km on SMF
Cabling
Dimensions
2.17(d) x 0.6(w) x 0.46(h) in. (5.51 x 1.52 x 1.17
cm)
Full configuration weight 0.04 lb. (0.02 kg)
Power consumption
typical
0.8 W
Power consumption
maximum
1.0 W
Cable type:
Either single mode or multimode;
Services
Maximum distance:
• 550m for Multimode
• 10km for Singlemode
Fiber type
Both
Refer to the HP website at www.hp.com/networking/services for details on
the service-level descriptions and product numbers. For details about services
and response times in your area, please contact your local HP sales office.
DA - 13791 North America — Version 21 — March 19, 2014
Page 31
QuickSpecs
HP 5820 Switch Series
Accessory Product Details
HP RPS1600 Redundant
Power System (JG136A)
Ports
Physical characteristics
8 redundant power supply ports
Restrictions: two -56V/25A DC(PoE); six -56V/8A DC(non-PoE)
Dimensions
15.63(d) x 17.32(w) x 1.74(h) in. (39.7 x 44 x 4.42
cm)
Weight
14.11 lb. (6.4 kg)
Full configuration weight 16.75 lb. (7.6 kg)
Environment
Operating temperature
14°F to 122°F (-10°C to 50°C)
Operating relative
humidity
5% to 95%
Nonoperating/Storage
temperature
-40°F to 158°F (-40°C to 70°C)
Nonoperating/Storage
relative humidity
5% to 95%
Altitude
up to 13,123 ft. (4 km)
Acoustic
Pressure: 53 dB; ISO 7779, ISO 9296
Electrical characteristics Voltage
100-120/200-240 VAC
Current
30/60 A
Idle power
38 W
Maximum power rating
3550 W
RPS power
3200 W
PoE power
2800 W
RPS
-55 V
PoE
-55 V
Frequency
50/60 Hz
Notes
Safety
Services
Idle power is the actual power consumption of the
device with no ports connected.
Maximum power rating and maximum heat
dissipation are the worst-case theoretical
maximum numbers provided for planning the
infrastructure with fully loaded PoE (if equipped),
100% traffic, all ports plugged in, and all modules
populated.
With one RPS1600 Power Supply, the PRS1600
Redundant Power System can provide 1600W
power output; With two PRS1600 Power Supplies,
the output power is 3200W.
CE Labeled; UL 60950-1; IEC 60950-1; ICES-003; FCC Part 15, Subpart B; EU
RoHS Compliant; EN 60950-1/A11; C-Tick; VCCI Class A; ROHS Compliance; EN
300386
Refer to the HP website at: www.hp.com/networking/services for details on
the service-level descriptions and product numbers. For details about services
and response times in your area, please contact your local HP sales office.
DA - 13791 North America — Version 21 — March 19, 2014
Page 32
QuickSpecs
HP 5820 Switch Series
Accessory Product Details
HP RPS1600 1600W AC
Power Supply (JG137A)
Physical characteristics
Environment
Dimensions
Weight
8.19(d) x 4.96(w) x 1.63(h) in. (20.8 x 12.6 x 4.15
cm)
3.02 lb. (1.37 kg)
Operating temperature
14°F to 122°F (-10°C to 50°C)
Operating relative
humidity
5% to 95%
Nonoperating/Storage
temperature
-40°F to 158°F (-40°C to 70°C)
Nonoperating/Storage
relative humidity
5% to 95%
Electrical characteristics Voltage
100-120/200-240 VAC
Current
15/30 A
Maximum power rating
1600 W
Frequency
50/60 Hz
Notes
Services
Maximum power rating and maximum heat
dissipation are the worst-case theoretical
maximum numbers provided for planning the
infrastructure with fully loaded PoE (if equipped),
100% traffic, all ports plugged in, and all modules
populated.
Refer to the HP website at: www.hp.com/networking/services for details on
the service-level descriptions and product numbers. For details about services
and response times in your area, please contact your local HP sales office.
HP 5800 VPN Firewall Module (JD255A)
Ports
Physical characteristics
Environment
Management
Features
2 RJ-45 auto-negotiating 10/100/1000 ports (IEEE 802.3 Type 10BASE-T, IEEE 802.3u Type 100BASE-TX,
IEEE 802.3ab Type 1000BASE-T)
2 dual-personality ports; auto-sensing 10/100/1000Base-T or SFP
1 RJ-45 serial console port
1 Compact Flash port
Dimensions
9.84(d) x 9.84(w) x 14.45(h) in. (25 x 25 x 36.7 cm)
Weight
7.72 lb. (3.5 kg)
Operating temperature
32°F to 113°F (0°C to 45°C)
Operating relative
humidity
10% to 95%, noncondensing
IMC - Intelligent Management Center; command-line interface; Web browser; SNMP Manager; Telnet;
HTTPS; RMON1; FTP
Performance
- 6.5Gbps Firewall Throughput
- 1.8M Concurrent connection
- 50K New connection per second
- Max 20480 security policies
- 2Gbps 3DES/AES VPN Throughput
- 5000 IPSec tunnel
DA - 13791 North America — Version 21 — March 19, 2014
Page 33
QuickSpecs
HP 5820 Switch Series
Accessory Product Details
- 4K VLAN
Firewall operation mode
- Routing mode
- Transparent mode
- Hybrid mode
AAA service
- Local Authentication
- Standard Radius
- HWTACACS+
- RADIUS domain Authentication
ASPF
- General TCP / UDP application
- FTP/SMTP/HTTP/RTSP/H323 Protocol State Detection
- SIP/MGCP/QQ/MSN Protocol State Detection
- Java/ActiveX Blocking and Detection
- Port mapping
- Support for the fragmented packets
Virtualization
- 256 Virtual Firewall
- 4 default Security Zone
- Max 256 Security Zone
NAT
- NAPT
- PAT
- NAT Server
- Port mapping
- Bidirectional NAT
- Static NAT
Network Security
- Add blacklist by hand or automatically
- IP+MAC Binding
- ARP Reverse Query
- ARP Cheat Check
- Management ports closed by default
DDOS
- DNS Query Flood
- SYN Flood
- Auto start TCP Proxy when Detect SYN Flood
- ICMP Flood
- UDP Flood
- IP Spoofing
- SQL injection filter
L2TP VPN
- LNS,LAC
- L2TP Multi-instance
GRE
- GRE tunneling protocol
IPSec
- AH/ESP
- ESP
- Transport/tunnel
DA - 13791 North America — Version 21 — March 19, 2014
Page 34
QuickSpecs
HP 5820 Switch Series
Accessory Product Details
- NAT traversal
- Strategy template
IKE
- DH
- Pre-share Key authentication-method
- Support aggressive mode and main exchange mode
- IKE DPD, PKI / CA
Network Feature
- 802.1q VLAN
- 4K sub-interface
- Static and dynamic ARP
- Multicast, PIM
- IGMP v1/v2/v3
Routing
- RIP
- OSPF
- BGP
- Static Route
- policy Route
High Availability
- Active/Active mode
- Active/Passive mode
- Session Synchronization for Firewall
System management
- Web Management support IE/Firefox
- Command line interface (Console/Telnet/SSH)
- Classification Manager
- Unified management through iMC
- SNMPv1/v2c/v3
Administration
- Software Upgrades
- Configuration Backup and Restore
Logging/Monitoring
- Syslog
- Mini RMON
- NTP
- NAT/ASPF/firewall log stream(Binary log)
IPv6 Routing & Multicast
- RIPng
- OSPFv3
- BGP4+
- Static Route
- Policy Route
- PIM-SM/DM
IPv6 Security
- NAT-PT
- Manual tunnel
- IPV6 OVER ipv4 GRE tunnel
- 6to4 tunnel (RFC3056)
- ISATAP Tunnel
- IPv6 Packet Filter
DA - 13791 North America — Version 21 — March 19, 2014
Page 35
QuickSpecs
HP 5820 Switch Series
Accessory Product Details
Services
- Radius
- NAT64
3-year, parts only, global next-day advance exchange (UZ914E)
3-year, 4-hour onsite, 13x5 coverage for hardware (UZ915 )
3-year, 4-hour onsite, 24x7 coverage for hardware (UZ918E)
3-year, 4-hour onsite, 24x7 coverage for hardware, 24x7 SW phone support and SW updates (UZ922E)
3-year, 24x7 SW phone support, software updates (UZ925E)
4-year, 4-hour onsite, 13x5 coverage for hardware (UZ916E)
4-year, 4-hour onsite, 24x7 coverage for hardware (UZ919E)
4-year, 4-hour onsite, 24x7 coverage for hardware, 24x7 software phone (UZ923E)
4-year, 24x7 SW phone support, software updates (UZ926E)
5-year, 4-hour onsite, 13x5 coverage for hardware (UZ917E)
5-year, 4-hour onsite, 24x7 coverage for hardware (UZ920E)
5-year, 4-hour onsite, 24x7 coverage for hardware, 24x7 software phone (UZ924E)
5-year, 24x7 SW phone support, software updates (UZ927E)
3 Yr 6 hr Call-to-Repair Onsite (UZ928E)
4 Yr 6 hr Call-to-Repair Onsite (UZ929E)
5 Yr 6 hr Call-to-Repair Onsite (UZ930E)
Refer to the HP website at: www.hp.com/networking/services for details on the service-level descriptions
and product numbers. For details about services and response times in your area, please contact your local
HP sales office.
Standards and protocols
IPv6
RFC 1981 IPv6 Path MTU Discovery
RFC 2460 IPv6 Specification
RFC 2465 Management Information Base for IP
Version 6: Textual Conventions and General
Group(partially support, only "IPv6 Interface
Statistics table")
RFC 3484 Default Address Selection for IPv6
RFC 3513 IPv6 Addressing Architecture
RFC 3587 IPv6 Global Unicast Address Format
RFC 4007 IPv6 Scoped Address Architecture
RFC 4862 IPv6 Stateless Address Auto-configuration
RFC 2405 The ESP DES-CBC Cipher Algorithm With
Explicit IV
RFC 2406 IP Encapsulating Security Payload (ESP)
RFC 2410 The NULL Encryption Algorithm and Its
Use With IPsec
RFC 2411 IP Security Document Roadmap
RFC 2451 The ESP CBC-Mode Cipher Algorithms
RFC 2473 Generic Packet Tunneling in IPv6
Specification
RFC 2529 Transmission of IPv6 over IPv4 Domains
without Explicit Tunnels
RFC 2661 Layer Two Tunneling Protocol "L2TP"
RFC 2784 Generic Routing Encapsulation (GRE)
RFC 2868 RADIUS Attributes for Tunnel Protocol
Security
Support
RFC 1321 The MD5 Message-Digest Algorithm
RFC 2893 Transition Mechanisms for IPv6 Hosts
RFC 1334 PPP Authentication Protocols (PAP)
RFC 1994 PPP Challenge Handshake Authentication and Routers
RFC 3602 The AES-CBC Cipher Algorithm and Its
Protocol (CHAP)
Use with IPsec
RFC 2104 Keyed-Hashing for Message
RFC 4214 Intra-Site Automatic Tunnel Addressing
Authentication
Protocol (ISATAP)
RFC 2138 RADIUS Authentication
RFC 2618 RADIUS Authentication Client MIB
IKEv1
RFC 2620 RADIUS Accounting Client MIB
RFC 2407 The Internet IP Security Domain of
RFC 2716 PPP EAP TLS Authentication Protocol
Interpretation for ISAKMP
RFC 2865 RADIUS Authentication
RFC 2408 Internet Security Association and Key
RFC 2866 RADIUS Accounting
Management Protocol (ISAKMP).
RFC 2867 RADIUS Accounting Modifications for
RFC 2409 The Internet Key Exchange (IKE)
Tunnel Protocol Support
DA - 13791 North America — Version 21 — March 19, 2014
Page 36
QuickSpecs
HP 5820 Switch Series
Accessory Product Details
RFC 2868 RADIUS Attributes for Tunnel Protocol
Support
RFC 2869 RADIUS Extensions
draft-grant-tacacs-02 (TACACS)
VPN
RFC 1701 Generic Routing Encapsulation (GRE)
RFC 1702 Generic Routing Encapsulation over IPv4
networks.
RFC 1828 IP Authentication using Keyed MD5
RFC 1829 The ESP DES-CBC Transform
RFC 1853 IP in IP Tunneling
RFC 2085 HMAC-MD5 IP Authentication with
Replay Prevention
RFC 2401 Security Architecture for the Internet
Protocol
RFC 2402 IP Authentication Header
RFC 2403 The Use of HMAC-MD5-96 within ESP
and AH
RFC 2404 The Use of HMAC-SHA-1-96 within ESP
and AH
HP 5820 4-port 8/4/2
Gbps FCoE SFP+ Module
(JC530A)
Physical characteristics
RFC 2412 The OAKLEY Key Determination Protocol
RFC 3526 More Modular Exponential (MODP)
Diffie-Hellman groups for Internet Key Exchange
(IKE)
RFC 3706 A Traffic-Based Method of Detecting
Dead Internet Key Exchange (IKE) Peers
PKI
RFC 2510 Internet X.509 Public Key Infrastructure
Certificate Management Protocols
RFC 2511 Internet X.509 Certificate Request
Message Format
RFC 3279 Algorithms and Identifiers for the Internet
X.509 Public Key Infrastructure Certificate and
Certificate Revocation List (CRL) Profile
RFC 3280 Internet X.509 Public Key Infrastructure
Certificate and Certificate Revocation List (CRL)
Profile
draft-nourse-scep-06:
PKCS#1
PKCS#10
PKCS#12
PKCS#7
Dimensions
8.27(d) x 6.3(w) x 1.46(h) in. (21 x 16 x 3.7 cm)
Weight
1.65 lb. (0.75 kg)
Full configuration weight 2.76 lb. (1.25 kg)
Environment
Notes
Operating temperature
32°F to 113°F (0°C to 45°C)
Operating relative
humidity
5% to 95%
Nonoperating/Storage
temperature
-40°F to 158°F (-40°C to 70°C)
Nonoperating/Storage
relative humidity
5% to 95%
Shock and vibration
halt 30g rms
Altitude
up to 13,123 ft. (4 km)
FCoE Features
• FCoE Compliance: Fibre Channel on Ethernet (FC-BB-5)/ IETF RFC 3643 draft
standard
• FCoE Support: FIP FCoE initialization protocol/ FIP snooping/ Auto
negotiation, full-duplex FC operation/ NPIV transparent connections to FC
fabrics
• Ethernet Interface Compliance/Support: 10Gbps XAUI ports x 4 (internal)/
ETS - Enhanced transmission Selection (802.1Qaz)/ PFC - Class-based Flow
Control (802.1Qbb)/ DCBX (802.1Qbb)
• Electrical: Connected and Activity LED controls in Ethernet mode
• Fibre Channel Standards: Physical Interface (FC-PI-3)/ Line Services (FC LS)/
DA - 13791 North America — Version 21 — March 19, 2014
Page 37
QuickSpecs
HP 5820 Switch Series
Accessory Product Details
Services
Framing & Signaling (FC-FS-2)/ Virtual Interface Architecture Mapping (FC-VI)
• Fibre Channel Standards Continued.: Fabric Element MIB Specification (RFC
2837)/ Fibre Alliance MIB Specification (Version 4.0)/ Methodologies for
Interconnects (FC-MI-2)/ Device Attach (FC-DA)
• Fibre Channel Classes of Service: Class 2/ Class 3/ Class F (inter-switch
frames) connectionless Fibre Channel protocol support
• NPIV support:FC-DA-2/ FC-MT/ FC-FS clause 5.2.41/ FC-LS table 141 clause
5.2.41/ 04-075v0/ 03-184v1/ 03-046
• External Customer Interfaces: Four external SFP+ Flex Ports which configure
to assume either of the following identities/ 10 Gigabit Converged Enhanced
Ethernet (CEE)/ 8/4/2 Gbps Fibre Channel
• External Customer Interfaces Continued: RJ-45 Ethernet management port/
Unit power and system status LEDs/ Port login and activity LEDs/Recessed
reset switch
• Media Support - Fibre Channel: Hot-pluggable/ 3.3 volt 8Gb SFP+
transceivers/ Also compatible with 4-Gbps and 2-Gbps SFPs/ Shortwave/
longwave optical
• Media Support - Ethernet: Hot-pluggable, 3.3 volt 10 Gigabit SFP+
transceivers/ TwinAx copper cables
• Other Features: SMI-S 1.1 support in firmware/ SAN boot support/Advanced
Security (RADIUS, SSH, SSL)
• Diagnostics: Telnet/ Web browser interface/ SNMP (status only)/ Telnet/ CLI/
Web browser interface/ API interface
• Software/ Firmware Management Interfaces: Simple Network Management
Protocol (SNMP)/ Management Information Base (MIB)/ CIM Provider/ Telnet/
CLI/Web Browser Management Interface/ API Interface
• Safety: USA/ Canada/ EU/ Australia/ New Zealand/ China
3-year, 4-hour onsite, 13x5 coverage for hardware (UY943E )
3-year, 4-hour onsite, 24x7 coverage for hardware (UY946E )
3-year, 4-hour onsite, 24x7 coverage for hardware, 24x7 SW phone support
and SW updates (UY950E )
3-year, 24x7 SW phone support, software updates (UY953E )
1-year, post-warranty, 4-hour onsite, 13x5 coverage for hardware (HR770E)
1-year, post-warranty, 4-hour onsite, 24x7 coverage for hardware (HR771E)
1-year, post-warranty, 4-hour onsite, 24x7 coverage for hardware, 24x7
software phone support (HR772E)
4-year, 4-hour onsite, 13x5 coverage for hardware (UY944E )
4-year, 4-hour onsite, 24x7 coverage for hardware (UY947E )
4-year, 4-hour onsite, 24x7 coverage for hardware, 24x7 software phone
(UY951E )
4-year, 24x7 SW phone support, software updates (UY954E )
5-year, 4-hour onsite, 13x5 coverage for hardware (UY945E )
5-year, 4-hour onsite, 24x7 coverage for hardware (UY948E )
5-year, 4-hour onsite, 24x7 coverage for hardware, 24x7 software phone
(UY952E )
5-year, 24x7 SW phone support, software updates (UY955E )
3 Yr 6 hr Call-to-Repair Onsite (UY956E )
4 Yr 6 hr Call-to-Repair Onsite (UY957E )
5 Yr 6 hr Call-to-Repair Onsite (UY958E )
1-year, 6 hour Call-To-Repair Onsite for hardware (HR774E)
1-year, 24x7 software phone support, software updates (HR773E)
DA - 13791 North America — Version 21 — March 19, 2014
Page 38
QuickSpecs
HP 5820 Switch Series
Accessory Product Details
Refer to the HP website at: www.hp.com/networking/services for details on
the service-level descriptions and product numbers. For details about services
and response times in your area, please contact your local HP sales office.
HP 5800 Access Controller Module for 64–256 Access Points (JD441A)
Ports
1 RJ-45 out-of-band management port
Physical characteristics
Dimensions
9.57(d) x 9.84(w) x 1.38(h) in. (24.3 x 25 x 3.5 cm)
Weight
3.64 lb. (1.65 kg)
Memory and processor
Processor
Eight core @ 1000 MHz, 1 GB compact flash, 2 GB DDR2 SDRAM
Performance
Switch fabric speed
8 Gbps
MAC address table size
8,000 entries
Operating temperature
32°F to 113°F (0°C to 45°C)
Operating relative
humidity
5% to 95%, non-condensing
Non-operating/Storage
temperature
-40°F to 158°F (-40°C to 70°C)
Non-operating/Storage
relative humidity
5% to 95%, non-condensing
Environment
Electrical characteristics Maximum heat
dissipation
Maximum power rating
Safety
Emissions
Immunity
Management
Notes
Services
Standards and protocols
273 BTU/hr (288.02 kJ/hr)
80 W
UL 60950-1; EN 60950-1; CAN/CSA-C22.2 No. 60950-1; Anatel; GOST; C-Tick; NOM; IEC 60950-1(with CB
report)
EN 55022; VCCI; ICES-003; AS/NZS CISPR 22; EN 300 386; FCC Part 15; EN 61000-3-2:2006; EN 61000-33:1995 +A1:2001+A2:2005; EMC Directive 2004/108/EC
EN
EN 61000-4-2:1995+A1:1998+A2:2001; EN 61000-4-3:2006; EN 61000-44:2004; EN 61000-4-5:2006; EN 61000-4-6: 1996 +A1:2001:A2:2007; EN
61000-4-8:2001; EN 61000-4-11:2004; EN 55024:1998+ A1:2001 + A2:2003
IMC - Intelligent Management Center; command-line interface; Web browser; configuration menu; SNMP
Manager; Telnet; HTTPS; RMON1; FTP; in-line and out-of-band; IEEE 802.3 Ethernet MIB; Ethernet
Interface MIB
Max. number of users: 4K. Max. number of users that are supported by local authentication: 1K. Max.
number of SSIDs that can be configured: 256. Max. number of users that are supported by local portal
authentication: 2K. Number of ACLs: 8K.
Refer to the HP website at: www.hp.com/networking/services for details on the service-level descriptions
and product numbers. For details about services and response times in your area, please contact your local
HP sales office.
General protocols
RFC 768 UDP
RFC 791 IP
RFC 792 ICMP
RFC 793 TCP
RFC 826 ARP
MIBs
RFC 1229 Interface MIB Extensions
RFC 1643 Ethernet MIB
RFC 1757 Remote Network Monitoring MIB
RFC 2011 SNMPv2 MIB for IP
RFC 2012 SNMPv2 MIB for TCP
DA - 13791 North America — Version 21 — March 19, 2014
Page 39
QuickSpecs
HP 5820 Switch Series
Accessory Product Details
RFC 854 TELNET
RFC 855 Telnet Option Specification
RFC 858 Telnet Suppress Go Ahead Option
RFC 894 IP over Ethernet
RFC 950 Internet Standard Subnetting Procedure
RFC 959 File Transfer Protocol (FTP)
RFC 1122 Host Requirements
RFC 1141 Incremental updating of the Internet
checksum
RFC 1144 Compressing TCP/IP headers for
low-speed serial links
RFC 1256 ICMP Router Discovery Protocol (IRDP)
RFC 1321 The MD5 Message-Digest Algorithm
RFC 1334 PPP Authentication Protocols (PAP)
RFC 1350 TFTP Protocol (revision 2)
RFC 1812 IPv4 Routing
RFC 1944 Benchmarking Methodology for Network
Interconnect Devices
RFC 1994 PPP Challenge Handshake Authentication
Protocol (CHAP)
RFC 2104 HMAC: Keyed-Hashing for Message
Authentication
RFC 2246 The TLS Protocol Version 1.0
RFC 2284 EAP over LAN
RFC 2644 Directed Broadcast Control
RFC 2864 The Inverted Stack Table Extension to the
Interfaces Group MIB
RFC 2866 RADIUS Accounting
RFC 2869 RADIUS Extensions
RFC 3268 Advanced Encryption Standard (AES)
Ciphersuites for Transport Layer Security (TLS)
RFC 3619 Ethernet Automatic Protection Switching
(EAPS)
draft-ietf-capwap-protocol-specification00.txt:CAPW
AP Protocol Specification
draft-ohara-capwap-lwapp-03.txt:Light Weight
Access Point Protocol
IP multicast
RFC 1112 IGMP
RFC 2236 IGMPv2
RFC 2934 Protocol Independent Multicast MIB for
IPv4
IPv6
RFC 1350 TFTP
RFC 1881 IPv6 Address Allocation Management
RFC 1887 IPv6 Unicast Address Allocation
Architecture
RFC 1981 IPv6 Path MTU Discovery
RFC 2013 SNMPv2 MIB for UDP
RFC 2571 SNMP Framework MIB
RFC 2572 SNMP-MPD MIB
RFC 2613 SMON MIB
RFC 2863 The Interfaces Group MIB
RFC 2932IP (Multicast Routing MIB)
RFC 2933 IGMP MIB
Mobility
IEEE 802.11a High Speed Physical Layer in the 5
GHz Band
IEEE 802.11b Higher-Speed Physical Layer
Extension in the 2.4 GHz Band
IEEE 802.11d Global Harmonization
IEEE 802.11g Further Higher Data Rate Extension in
the 2.4 GHz Band
IEEE 802.11i Medium Access Control (MAC)
Security Enhancements
IEEE 802.11n WLAN Enhancements for Higher
Throughput
Network management
RFC 1155 Structure of Management Information
RFC 1905 SNMPv2 Protocol Operations
RFC 2573 SNMPv3 Applications
RFC 2574 SNMPv3 User-based Security Model
(USM)
RFC 2575 VACM for SNMP
SNMPv1/v2c
QoS/CoS
RFC 2474 DS Field in the IPv4 and IPv6 Headers
RFC 2475 DiffServ Architecture
RFC 3168 The Addition of Explicit Congestion
Notification (ECN) to IP
Security
IEEE 802.1X Port Based Network Access Control
RFC 3394 Advanced Encryption Standard (AES)
Key Wrap Algorithm
RFC 3579 RADIUS Support For Extensible
Authentication Protocol (EAP)
Access Control Lists (ACLs)
Guest VLAN for 802.1x
MAC Authentication
Secure Sockets Layer (SSL)
SSHv1.5 Secure Shell
SSHv2 Secure Shell
Web Authentication
WPA (Wi-Fi Protected Access)/WPA2
DA - 13791 North America — Version 21 — March 19, 2014
Page 40
QuickSpecs
HP 5820 Switch Series
Accessory Product Details
RFC 2292 Advanced Sockets API for IPv6
IKEv1
RFC 2373 IPv6 Addressing Architecture
RFC 3748 - Extensible Authentication Protocol (EAP)
RFC 2375 IPv6 Multicast Address Assignments
RFC 2460 IPv6 Specification
RFC 2461 IPv6 Neighbor Discovery
RFC 2462 IPv6 Stateless Address Auto-configuration
RFC 2463 ICMPv6
RFC 2464 Transmission of IPv6 over Ethernet
Networks
RFC 2526 Reserved IPv6 Subnet Anycast Addresses
RFC 2563 ICMPv6
RFC 2925 Definitions of Managed Objects for
Remote Ping, Traceroute, and Lookup Operations
(Ping only)
RFC 3484 Default Address Selection for IPv6
RFC 3587 IPv6 Global Unicast Address Format
RFC 4443 ICMPv6
RFC 4541 IGMP & MLD Snooping Switch
RFC 4861 IPv6 Neighbor Discovery
RFC 4862 IPv6 Stateless Address Auto-configuration
RFC 5095 Deprecation of Type 0 Routing Headers
in IPv6
To learn more, visit: www.hp.com/networking
© Copyright 2010-2014 Hewlett-Packard Development Company, L.P. The information contained herein is subject to change without
notice. The only warranties for HP products and services are set forth in the express warranty statements accompanying such
products and services. Nothing herein should be construed as constituting an additional warranty. HP shall not be liable for technical or
editorial errors or omissions contained herein.
DA - 13791 North America — Version 21 — March 19, 2014
Page 41