CW 26 380 - Truck Centre WA

CW 26 380
SPECIFICATIONS
GVM*
GCM
26,000 kg
50,000kg
Power
Torque
Transmission
Suspension
278 kW @ 1,800 rpm
1,790 Nm @ 950 rpm
ESCOT V 12 speed AMT
UD Trucks Airbag and 6-Rod leaf
FEATURES
Full floating, 4 bag air suspended cab
ECE-R29 Cab strength compliant
WABCO EBS (Electronic Braking System) & ABS
ADR84/00 (ECE-R93) integrated Front Underrun
Protection (FUPS)
Easy Hill Start (EHS)
Multi adjustable air suspended driver seat
Automatic Climate Control
Touch screen multimedia with SD, USB, CD, DVD, 3.5mm inputs
Heated/cooled drink holders and lunch compartment
Unlimited factory custom paint options available
udtrucks.com.au
Note: CW 26 380 cab chassis shown – may not be representative of actual vehicle
SAFETY
CLUTCH
ECE-R29 Cab strength compliant
Electronic Braking System (EBS) with ABS and traction control (ASR)
SRS drivers airbag with seat belt pretensioner
ADR84/00 (ECE-R93) integrated Front Underrun Protection (FUPS)
Easy Hill Start (EHS)
Electrically operated and heated mirrors
360° visibility with up to 4 optional cameras
Make
Description
Disc diameter
Mechanism
ENGINE
Make
UD Trucks
ModelGH11TB
Description
4 cycle, direct injection, diesel engine with overhead
cam, 4 valves per cylinder, water cooled and
intercooler with variable turbocharging system.
Cylinders
6 in-line
Total piston displacement
10,837 cc (11 litres)
Bore x stroke
123 mm x 152 mm
Compression ratio
17:1
Max. Power (ECE Net)
278 kW (378 ps) @ 1,800 rpm
Max. Power (JIS Gross est.) 289 kW (393 ps) @ 1,800 rpm
Max. Torque (ECE Net)
1,790 Nm (1,320 lb/ft) @ 950 rpm
Max. Torque (JIS Gross est.) 1,859 Nm (1,371 lb/ft) @ 950 rpm
Max. governed engine speed 2,300 rpm
UD Trucks
Dry single organic plate with pull type diaphragm
430 mm
Hydraulically operated with air assistance
TRANSMISSION
Make
UD Trucks
ModelATO2612D
Description ESCOT V fully automated manual AMT 12 forward and
2 reverse gears. Synchronised range and splitter gears
Shift type
Electronic sequential shifter
Gear ratios
1st11.737th2.70
2nd9.21 8th2.12
3rd7.09 9th1.63
4th5.57 10th1.28
5th4.35 11th1.00Rev 113.73
6th3.41 12th0.79Rev 210.78
PTO capability
Rear mount opening with 500 Nm @ 103% or 81% engine speed
FRONT AXLE AND SUSPENSION SYSTEM
Axle make
Description
Suspension
Dimensions (mm)
Number of leaves
Spring constant
Shock Absorbers
Stabiliser bar
Max. ground capacity
UD Trucks
Drop forged steel “I” section beam, “ELLIOT” type
Taper leaf spring
90 mm x 1,550 mm
4
430 N/mm (43.8 kg/mm)
2 x Telescopic double acting
Fitted
Refer to the Load Capacity Summary
REAR AXLE AND SUSPENSION SYSTEM
Lubrication system
Compressed air system
Cooling system
Gear pump, flat tube oil cooler, 2 x full-flow and
1 x bi-pass replaceable oil filters
Water cooled, twin cylinder 900 L/min air compressor with oil mist separator and air dryer
Centrifugal water pump, wax pellet type thermostats with bypass. 720/750 mm Aluminium radiator with external mounted reserve tank and a 680 mm diameter
viscous coupling cooling fan
FUEL AND INTAKE SYSTEM
Injection type
Filtration
Capacity
Air filtration
Air intake
Ultra high pressure unit injection system
Primary and engine mounted filters
400 litre aluminium tank with lockable cap on
RHS chassis
Primary and secondary paper element air filters on LHS
High mounted LHS air intake
EXHAUST AND EMISSION CONTROL Emission standard
Emission system
AdBlue® capacity
Exhaust system
ADR80/03 (Euro 5)
Selective Catalytic Reduction (SCR)
60 litre polymer tank with lockable cap on RHS
RHS chassis box muffler/catalytic converter with rear
facing exhaust discharge under truck
ELECTRICAL Power
Battery capacity
Alternator
Factory electrical connections
24 volt, negative ground system
2 x 12 volt 140 Ah batteries mounted on LHS chassis
130 amp MELCO
24 volt trailer lighting and ABS wiring supplied to the
rear of chassis
Axle make
Type
Gear type
Final reduction ratio
UD Trucks
Fully floating steel banjo housing, in-line tandem type power divider with electro/pneumatic remote lock up (switch on dash)
Single reduction, hypoid gear
4.333:1 ('T' & 'W' W/B)
4.625:1 ('L' W/B)
LEAF SUSPENSION (L and T WB)
Description
Leaf dimensions (mm)
Number of leaves
Spring constant
Max. ground capacity
Trunion mounted, multi leaf springs with 6 torque rods
90 mm x 1,300 mm
8
2,672 N/mm (272.5 kg/mm)
Refer to the Load Capacity Summary
AIR SUSPENSION (W WB)
Description
Air spring diameter
Number of springs
Spring constant
Shock absorbers
Stabiliser bar
Road Friendly Certification Number (RFCN)
Control system
Max. ground capacity
UD Trucks full floating with v-type control rods
270 mm
8 airbags
90 N/mm (9.2 kg/mm)
4 telescopic double acting
1 fitted to each axle
RF2058
WABCO ECAS (Electronic Controlled Air Suspension programable remote control mounted in cab)
Refer to the Load Capacity Summary
LOAD CAPACITY SUMMARY
Front (kg)
Rear (kg)
Airbag or Leaf
Axle
8,200
23,600
23,600
Steering/suspension
6,500
20,000
23,600
Tyres
7,100
23,000
23,200
Max. ground capacity*
6,500
20,000
23,200
BRAKES
EXTERNAL CABIN
Type
Description
Air pressure
Drum diameter
Lining area
Park brakes
Trailer controls
Auxiliary brake
Factory air connections
WABCO Electronic Braking System (EBS)
Full electronically controlled EBS system with
aluminium air tanks, automatic adjusting, taper roller drum brakes, 4 channel ABS, traction control (ASR) and Easy Hill Start (EHS)
7.9 - 9.5kg/cm2
FrontRear Total
410 mm
410 mm
2,984 cm2
7,296 cm2
10,280 cm2
Spring park brake on drive axles
Progressive trailer brake hand controller
Exhaust plus Engine compression type (EEB)
Trailer air connections to rear of chassis
Description
Aerodynamically designed, forward control, pressed
steel construction cab with 65° electro / hydraulic tilt
Mounting type
Crash test standard
Cab paint
Doors
Inspection points
Bumper type
Mirrors
Lamps
Glass
Wipers
Reversing system
Full floating, 4 bag air suspended cab with 4 dual acting shock absorbers and dual automatic height
control valves
ECE-R29 compliant
Standard – Jumping White (W33)
90° opening, steel construction with side intrusion beams
Most daily inspections can be carried out without
lifting the cab from the front opening inspection
panel. The power steer and coolant are behind the
cab on the driver side.
3 piece, pressed steel, air dam front bumper
Heated and electrically operated LH and RH main mirrors with wide vision spot mirrors and down facing
spot mirror
Halogen multi-reflector head lamps
ADR49/00 bumper mounted fog lamps
ADR49/00 roof mounted clearance lights
Rear of cab mounted (rear facing) flood (work) lamp
Tinted front, side and rear
Triple arm, 2 speed wipers with variable intermittent operation and integrated washers
Rear facing reverse light and audible warning alarm
Optional remote mounted camera/s with microphone
(see Dealer Options list)
STEERING
Type
Steering gear ratio
Column
Steering wheel
Recirculating ball and screw with hydraulic assist
24.1 - 26.8:1
Adjustable, tilt and telescopic control
460 mm diameter with ignition key steering lock
WHEELS AND TYRES
Wheels
Front tyres
Rear tyres except W WB
W WB only
Spare tyre
Pressed steel disc type 8.25" x 22.5" rim with
165 mm offset and ISO 10 stud pattern (335 mm PCD)
Single 295/80R 22.5 Dunlop SP350, regroovable
Dual 11R 22.5 Dunlop SP431, regroovable
Dual 11R 22.5 Dunlop SP343, regroovable
Single 295/80R 22.5 Dunlop SP350, regroovable mounted on Spare Tyre Carrier, LHS (L WB) Rear
(T-W WB) of chassis
FRAME
Construction
Ladder channel type chassis construction
Type
Rigid truck rear of frame (ROF)
Width
840 mm
Side rail dimensions
300 mm x 90 mm x 8 mm (T & W W/B)
300 mm x 90 mm x 8 mm + 284 mm x 75 mm x 6 mm
(L W/B)
Material
Pressed high tensile carbon steel
Rail data
Tensile
Yield
Modulus
55 kg/mm2 40.8 kg/mm2 Refer to Body Manual
udtrucks.com.au
Turntable angles
N/A
STANDARD DRIVER AIDS
INTERNAL CABIN
Lighting
Seating
Driver's seat
Passenger seat(s)
Sleeping capability
Side windows
Dual ON/OFF/DOOR interior lights with an independent 720 mm x 140 mm fluorescent lamp
3 occupant seats with retractable seat belts, centre seat with lap belt
CVG multi-adjustable, air suspended with automatic
height control and adjustable shock absorber
Flat folding Centre and LH assistant seat, lift up base LH
ADR42/04 compliant sleeper bunk with mattress
(full cab curtains)
Power operated door glass
Security
Remote keyless central locking
Air conditioning
Fully automatic electronic climate controlled
Audio system
6.1” Touch Screen, Digital Radio DAB+, Inbuilt 32G
Hard Drive, 4 Camera inputs incl. option for
IR night vision and multiple component inputs, SD,
USB, CD, DVD, 3.5mm
Cup holders
2 heated or cooled centre mounted cup holders
RH and LH door mounted bottle holders
Storage
3 litre capacity storage box with lid (heated or cooled)
9 litre overhead centre mounted console with lid
Dual overhead document pockets (behind sunvisors)
Driver and passenger door pockets
Power outlet
24 volt 240W cigarette lighter/power outlet
Accessory fitment
Two DIN sized compartments for accessory fitment
Floor covering
Vinyl
Safety equipment
ECE-R29 Cab strength compliant
WABCO Electronic Braking System (EBS)
Anti Slip Regulation (ASR)
SRS driver steering wheel airbag
SRS driver seat belt pretensioner
ADR84/00 (ECE-R93) Front Underrun Protection
Easy Hill Start (EHS)
System compliance (FUPS)
ABS – Anti-lock Brake System
Instrumentation
Fully electronic, CAN-BUS instrument system including speedometer, tachometer with economical green
driving band, fuel, AdBlue® and independent front and rear air circuit pressure gauges. Digital odometer
display with dual trip function.
Tyres
Seating
275/70R22.5 - With 4.111 diff ratio
(6,300 kg FA capacity)
16 litre Centre console (replaces centre seat)
PTO control
Engine governor / Transmission Control Switch and lever
Rear engine PTO
650 Nm capacity @ 108% engine speed
Warning systems
Up to 40 visual warning lamps plus more than 10 different written warnings displayed on the LCD screen. In conjunction, various audible tones are used.
Transmission PTO
500 Nm @ 103% or 81% engine speed
Cab paint
20 x factory option colours
Custom paint colours (up to 3 colours per cab)
Driver assistance Driver Information System (DIS) displaying useful vehicle data including: date/time, oil pressure,
voltmeter, trip information, along with service intervals
for engine, transmission and differentials. Electronic
stalk mounted cruise control. GPS satellite navigation
with NAVTEQ “truck” mapping.
DEALER FIT OPTIONAL EQUIPMENT
FACTORY OPTIONAL EQUIPMENT (indent order)
Fleet management
Cameras
Wheels
Other
GPS-based fleet management system
Up to 4 cameras connected to the in-dash
multimedia unit
22.5" Alcoa aluminium wheels
Refer to your UD Trucks Accessories brochure
udtrucks.com.au
TYPICAL APPLICATIONS
Tipper and Dog
Rigid Construction transport
Tilt Tray
Combination Freight
Rigid Metro Delivery 16 Pallet Body
GENERAL SPECIFICATIONS (Approximate)
UD Trucks - air 6 Rod - Leaf
L
T
1,930 3,635
2,490 2,970 2,030 1,840 1,300
4,365 3,970 8,335 6,000 11,110
260 1,032 1,100
6,900
CW26380LAL
9,200
CW26380TAL
N/A
3,590 5,285
26,000 55,000 4,440 3,855 8,295 6,500 11,460 2,490 2,970 2,030 1,840 1,350 3,440 5,785 260 1,015 1,015
UD order
code
FHR²
(Lowered
height)
Turning
radius (kerb
to kerb)
FHR2
FHF2
GC2
CA
ROH
AS
RT
FT
OH2
4,440 3,625 8,065 4,350 7,800
26,000 55,000
W
OW
OL
WB3
Total Tare1
RA1
Vehicle Dimensions (mm)
FA1
GCM
GVM*
Wheelbase
code
Variant
Mass (kg)
972
9,900 CW26380WAA
1
Mass is an estimation only based on standard model, includes fluids (not diesel fuel or AdBlue®), spare tyre carrier and spare, excludes tools and driver. When fitted with
optional alloy wheels, subtract 37 kg from front and 148 kg from rear tare weight. ² Based on vehicle with standard wheels and tyres. 3 Due to rear suspension torsional
loading the wheel base of this model must not be shortened to less to 5,500 mm (W wheelbase only)
Note: CW 26 380 photo and drawing shown, may not be representative of actual truck
PERFORMANCE (Calculated)
Max road speed
Gradeability 1st gear
Gradeability top gear
Est RPM @ 100km/h
12 speed (AMT) 4.333 diff ratio and 11R 22.5"
100 km/h (ADR65/00 - Speed limited)
31.5% @ 50,000 kg
1.2% @ 50,000 kg
1,882 rpm
12 speed (AMT) 4.625 diff ratio and 11R 22.5"
100km/h (ADR65/00 - Speed limited)
33.6% @ 50,000 kg
1.3% @ 50,000 kg
2,008 rpm
12 speed (AMT) 4.111 diff ratio and 275/70R 22.5"
100km/h (ADR65/00 - Speed limited)
32.7% @ 50,000 kg
1.3% @ 50,000 kg
1,955 rpm
WARRANTY
Standard warranty+
Cab corrosion warranty+
Driveline Coverage++
36 months/500,000 kms
36 months/unlimited kms
36 months/800,000 kms
+ For details refer to udtrucks.com.au
++Covers selected items only. For details refer to udtrucks.com.au
NOTES: *Rated GVM and axle capacities are subject to Federal, State and Territory legal requirements.
DISCLAIMER: Imported and distributed by Volvo Group Australia Pty Ltd (ABN: 27 000 761 259). Photos for illustration purposes. Volvo Group
Australia Pty Ltd reserves the right to modify design and change equipment without previous notification. Please consult with your UD Trucks Dealer
for the latest information about vehicle specifications.
udtrucks.com.au
Issue Date
OCTOBER 2014