gas detection and monitoring solutions for life

GAS DETECTION AND
MONITORING SOLUTIONS
FOR LIFE
www.indsci.com
GAS DETECTION AS A SERVICE
Imagine Your Peace of Mind... Imagine iNet.
Subscribe to Gas Detection as a Service
You’re plenty busy focusing on the things that matter to your business. Amid your daily tasks is the hefty responsibility
of ensuring your people are kept safe from hazardous gases and that they go home at the end of each day. Buying
your fleet of gas detectors was easy, but then the challenges came.
What Challenges Do You Face In Your Program?
• What is your process for regularly maintaining and servicing your gas detector fleet?
• How do you maintain accurate records reflecting your gas detection program?
• Do you know how your instruments are being used in the field; what your workers are exposed to;
and at what levels they’re exposed?
How Gas Detection as a Service Works
1.
Operators dock gas
detectors owned by
Industrial Scientific.
5.
When iNet detects a problem,
Industrial Scientific rushes a
replacement gas detector to you.
2.
Docking Stations perform
bump tests, calibrations
and recordkeeping.
3.
iNet Control
provides visibility into your gas
detection program via the Web.
4.
iNet emails real-time
alerts and status reports.
www.indsci.com/inet
iNet is a subscription-based gas detection program
designed to give you peace of mind that your
equipment is properly maintained and proactively
serviced; that you are able to provide required
records on demand with minimal effort; and that your
people are kept safe from hazardous gases.
Do you prefer to own and
maintain your own equipment?
DSXi Cloud-connected is your solution to a
safer workplace.
Instrument Maintenance
• Schedule instrument bump
tests and calibrations to
occur automatically
• Receive replacement units
from Industrial Scientific
when iNet detects a
malfunctioning instrument
in your fleet
Recordkeeping
• Produce required records on
demand
• Eliminate the prone-toerror task of manually
maintaining records
Field Visibility
• Understand how your instruments are being used
in the field and the risks your team faces
• Use data to proactively correct poor use behavior
www.indsci.com/dsx
The DSX in cloud-connected mode is an automated
maintenance, record storage, and fleet management
solution.
• Bump test and calibration schedules can be
tracked and set to be performed automatically,
ensuring that instruments are ready for use prior to
the start of a shift.
• Cloud-based data storage provides peace of mind
with automatic file back-up, and easy recovery in
case of unexpected data loss.
• Effortlessly manage your fleet, data, and software
updates from any web-enabled device.
• Email alerts and notifications provide information
on worker exposure and instrument usage, as well
as instrument service needs.
• Stop worrying about calibration gas. The optional
auto calibration gas replenishment program
provides an efficient way to manage your
calibration gas usage and needs. New cylinders
will be shipped to you when you need them.
See the DSX Docking Station on page 10.
www.indsci.com
MULTI-GAS MONITORS
MX6 iBrid™
Multi-Gas Monitor
• 24 “Plug-and-Play” field-replaceable sensors including PID
and Infrared options
• Simple, user-friendly, customizable menu-driven navigation
• Optional integral sampling pump with strong 30.5 meter
(100 feet) sample draw
• Up to 6 gases monitored simultaneously
• Full-color graphic LCD is highly visible in a variety of
lighting conditions
• Five-way navigation button
• Powerful, 95 dB audible alarm
Durable, concussion-proof overmold
Get ready to see hazardous levels of
oxygen, toxic and combustible gas, and
volatile organic compounds (VOCs) like
never before.
The MX6 iBrid is more than an intelligent hybrid of
Industrial Scientific’s best monitoring technologies. It’s
the first gas monitor to feature a full-color LCD display
screen.
The display improves safety with clear readings in lowlight, bright-light or anywhere in between. Whether
the work is outside, inside or underground, it’s easy
to see what gas hazards lurk in the immediate work
environment.
The color display of the MX6 allows the user to step
through instrument settings and functions with an
intuitive menu and the instrument’s five-way navigation
button. It even supports the option of on-board graphing
for easily interpreted direct readings and recorded data.
SPECIFICATIONS*
WARRANTY:
Guaranteed for Life. Warranted for as long as the instrument is supported by Industrial
Scientific Corporation
CASE MATERIAL:
Lexan/ABS/Stainless Steel w/protective rubber overmold
DIMENSIONS:
135 x 77 x 43 mm (5.3 x 3.0 x 1.7 in) – without pump
167 x 77 x 56 mm (6.6 x 3.1 x 2.2 in) – with pump
WEIGHT:
409 g (14.4 oz) typical – without pump; 511 g (18.0 oz) typical – with pump
DISPLAY/READOUT:
Color Graphic Liquid Crystal Display
POWER SOURCE/RUN TIMES:
Rechargeable Lithium-ion (Li-ion) Battery Pack (24 hours) – without pump
Rechargeable, Extended-Range Lithium-ion (Li-ion) Battery Pack
(36 hours) – without pump
Replaceable AA Alkaline Battery Pack (10.5 hours) – without pump
OPERATING TEMPERATURE RANGE:
-20 ºC to 55 ºC (-4 ºF to 131 ºF)
OPERATING HUMIDITY RANGE:
15% to 95% non-condensing (continuous)
SENSORS AND MEASURING RANGES:
SENSOR
CATALYTIC BEAD
RANGE
RESOLUTION
Combustible Gas
Methane
0-100% LEL
0-5% vol
1%
0.01%
0-500 ppm
0-1,500 ppm
0-9,999 ppm
0-1,000 ppm
0-50 ppm
0-1 ppm
CO: 0-1,500 ppm
H2S: 0-500 ppm
0-2,000 ppm
0-30 ppm
0-30 ppm
0-500 ppm
0-1,000 ppm
0-150 ppm
0-30% vol
0-5 ppm
0-1,000 ppm
0-150 ppm
1
1
1
1
0.1
0.01
1
0.1
1
0.1
0.1
0.1
1
0.1
0.1%
0.01
1
0.1
0-100% LEL
0-100% vol
0-100% LEL
0-5% vol
1%
1%
1%
0.01%
0-2,000 ppm
0.1
ELECTROCHEMICAL
Ammonia
Carbon Monoxide
Carbon Monoxide (High Range)
Carbon Monoxide/Hydrogen low
Chlorine
Chlorine Dioxide
Carbon Monoxide/
Hydrogen Sulfide (COSH)
Hydrogen
Hydrogen Chloride
Hydrogen Cyanide
Hydrogen Sulfide
Nitric Oxide
Nitrogen Dioxide
Oxygen
Phosphine
Phosphine (High Range)
Sulfur Dioxide
INFRARED
Hydrocarbons
Methane (% vol)
Methane (% LEL)
Carbon Dioxide
PHOTOIONIZATION
VOC
SUPPLIED WITH MONITOR:
Universal charger, nylon carrying case, belt clip, calibration cup, wrist strap, manual,
quick start guide, dust filter/water stop (with pump), sample tubing
(with pump).
LANGUAGE OPTIONS
English, Portuguese, French, Indonesian, Spanish, Russian, German, Polish, Italian,
Czech, and Dutch
* These specifications are based on performance averages and may vary by instrument
www.indsci.com/mx6
SPECIFICATIONS*
Ventis™ Pro Series
Monitor
WARRANTY:
Guaranteed for Life. Warranted for as long as the instrument is supported by
Industrial Scientific Corporation (excludes sensors, batteries, and filters). O2, LEL,
CO, and H2S sensors warranted for three years. All other sensors warranted for two
years. Pumps and batteries are warranted for two years.
KEYPAD:
Two buttons for operation, dedicated panic button
DATA LOG:
At least 3 months at 10-second intervals
EVENT LOGGING:
60 alarm events
INGRESS PROTECTION:
IP68 (submersion at 1.5 meters for 1 hour)
CASE MATERIAL:
Polycarbonate with protective rubber overmold
DIMENSIONS:
104 x 58 x 36 mm (4.1 x 2.3 x 1.4 in) without pump
172 x 67 x 65 mm (6.8 x 2.6 x 2.6 in) with pump
• Flexible sensor configurations detect up to five gases
• With integral pump for confined spaces or without integral
pump for personal protection
• Custom start-up messages, alarm action messages, and
acknowledgeable gas alerts
• Man-down alarm and dedicated panic button
• Rugged IP68 dust and water rating and Guaranteed for
Life™ warranty**
• Compatible with most Ventis™ MX4 accessories
• Dock overdue and maintenance reminders
• iNet® and docking station ready
What Gases Will You Need to Monitor?
Simultaneous Gases
TM
Four
TM
Five
O2
LEL/CH4
CO
H2S
SO2
NO2
CO/H2 Low
HCN
NH3
CO/H2S
CO2 /HC IR
CO2 /CH4 IR
TEMPERATURE RANGE:
-40 °C to 50 °C (-40 °F to 122 °F)
HUMIDITY RANGE:
15%-95% non-condensing (continuous)
DISPLAY/READOUT:
Backlit liquid crystal display (LCD)
• User and site tracking with iAssign™ Technology
DETECTION
CAPABILITIES
WEIGHT:
200 g (7.05 oz), typical without pump
390 g (13.76 oz), typical with pump
POWER SOURCE/RUN TIME:
Rechargeable lithium-ion battery pack with LEL
(12 hours typical @ 20 ºC) – without pump
Rechargeable extended-range lithium-ion battery pack with LEL
(24 hours typical @ 20 ºC) – without pump
(18 hours typical @ 20 ºC) – with pump
Rechargeable lithium-ion battery pack with IR
(36 hours typical @ 20 ºC) – without pump
Rechargeable extended-range lithium-ion battery pack with IR
(72 hours typical @ 20 ºC) – without pump
(32 hours typical @ 20 ºC) – with pump
ALARMS:
Four visual alarm LEDs (two red, two blue);
95 decibel (dB) audible alarm at a distance of 10 cm (3.94 in); Vibration alarm
SENSORS AND MEASURING RANGES:
SENSOR
RANGE
CATALYTIC BEAD
Combustible Gases:
0-100% LEL
Methane (CH4):
0-5% of vol
ELECTROCHEMICAL
Ammonia:
0-500 ppm
Carbon Monoxide (CO):
0-2,000 ppm
Carbon Monoxide (CO/H2 low):
0-1,000 ppm
Carbon Monoxide/
CO: 0-1,500 ppm
Hydrogen Sulfide:
H2S: 0-500 ppm
Hydrogen Sulfide (H2S):
0-500 ppm
Hydrogen Cyanide:
0-30 ppm
Nitrogen Dioxide (NO2):
0-150 ppm
Oxygen (O2):
0-30% of vol
Sulfur Dioxide (SO2):
0-150 ppm
INFRARED
Carbon Dioxide/Hydrocarbons:
CO2: 0-5% vol
HC: 0-100% LEL
Carbon Dioxide/Methane:
CO2: 0-5% vol
CH4: 0-5% vol
CH4: 5-100% vol
RESOLUTION
1%
0.01%
1 ppm
1 ppm
1 ppm
1 ppm
0.1 ppm
0.1 ppm
0.1 ppm
0.1 ppm
0.1%
0.1 ppm
0.01%
1%
0.01%
0.01%
0.1%
SUPPLIED WITH MONITOR:
Calibration Cup (Ventis), Sample Tubing (Ventis with pump), Reference Guide
www.indsci.com/ventispro
www.indsci.com
MULTI-GAS MONITORS
Ventis™ MX4
Multi-Gas Monitor
• Configure for diffusion applications or with an integral
sampling pump for sample draw applications
• Detect from one to four gases with a wide range of sensor
options
• Gain visibility of the instrument in darker environments
with a tough, “Safety Orange” overmold
• Realize true portability with multi-gas protection in singlegas size
• Utilize the diffusion monitor for 20 hours with a
rechargeable lithium-ion extended range battery pack
Configured for your safety, the highly
configurable and iNet-compatible Ventis
MX4 takes your gas detection program to
the next level.
The Ventis MX4 i­s a compact, multi-gas monitor available
in both aspirated and diffusion versions. Both highly
configurable and iNet compatible, the Ventis meets your
gas detection needs with ease. It is the ideal instrument
for monitoring one to four gases in confined spaces and
nearly any other potentially hazardous environment.
This lightweight instrument is available with a bright
"safety orange" overmold providing visibility in darker
environments. An extended range lithium-ion battery
pack provides up to 20 hours of continuous monitoring
when using the diffusion version.
www.indsci.com/ventis
SPECIFICATIONS*
INSTRUMENT WARRANTY:
Two- year warranty, including sensors and battery
Case Material:
Polycarbonate w/ protective rubber overmold
DIMENSIONS:
103 x 58 x 30 mm (4.1 x 2.3 x 1.2 in) – Ventis lithium-ion battery version
172 x 67 x 66 mm (6.8 x 2.6 x 2.6 in) – Ventis with pump lithium-ion battery version
WEIGHT:
182 g (6.4 oz) – Ventis, lithium-ion battery version
380 g (13.4 oz) – Ventis with Pump, lithium-ion battery version
OPERATING TEMPERATURE RANGE:
-20 °C to 50 °C (-4 °F to 122 °F)
OPERATING HUMIDITY RANGE:
15% to 95% non-condensing (continuous)
DISPLAY/READOUT:
Backlit Liquid Crystal Display (LCD)
POWER SOURCE/RUN TIME:
Rechargeable lithium-ion battery pack
(12 hours typical @ 20 ºC) – Ventis
Rechargeable extended-range lithium-ion battery pack
(20 hours typical @ 20 ºC) – Ventis
(12 hours typical @ 20 ºC) – Ventis with pump
Replaceable AAA alkaline battery pack
(8 hours typical @ 20 ºC) – Ventis
(4 hours typical @ 20 ºC) – Ventis with pump
ALARMS:
Ultra-bright LEDs, loud audible alarm (95 dB at 30 cm), and vibrating alarm
SENSORS AND MEASURING RANGES:
Combustible Gases:
0-100% LEL in 1% increments
Methane (CH4): 0-5% of vol in 0.01% increments
Oxygen (O2): 0-30% of vol in 0.1% increments
Carbon monoxide (CO): 0-1,000 ppm in 1 ppm increments
Hydrogen sulfide (H2S): 0-500 ppm in 0.1 ppm increments
Nitrogen dioxide (NO2): 0-150 ppm in 0.1 ppm increments
Sulfur dioxide (SO2): 0-150 ppm in 0.1 ppm increments
SUPPLIED WITH MONITOR:
Calibration Cup (Ventis), Sample Tubing (Ventis with Pump), Ventis MX4 Reference
Guide
* These specifications are based on performance averages and may vary by instrument
AREA MONITORS
Radius™ BZ1
Area Monitor
SPECIFICATIONS*
WARRANTY:
Two-year warranty, including sensors and battery
KEYPAD:
Three buttons
DATA LOG:
At least 3 months at 10-second intervals
EVENT LOGGING:
60 alarm events
INGRESS PROTECTION:
IP66
CASE MATERIAL:
Impact-resistant polycarbonate alloys
DIMENSIONS:
29 x 29 x 55 cm (11.5 x 11.5 x 21.5 in)
• Detect up to seven gases using 15 sensor options
including PID
• Longest running area monitor with a typical run time of 7
days (168 hours)
• Intrinsic safety external power supply can extend
battery run time to over 1 month
• Ultra-bright blue and red lights and attention-grabbing
alarms with distinctive tones
• Audible alarms sound at 108 dB at 1 m to cut through
high-noise environments
• Largest display of any area monitor on the market
• Intuitive text-based navigation and configuration
• Customizable alarm action messages such as
“EVACUATE” or “VENTILATE”
• Pre-configured LENS™ Wireless networks require no setup
or infrastructure
• All-weather sensor deployment and 360-degree gas
path for more accurate detection
• DualSense® Technology increases worker safety by
using two sensors to detect the same gas
• iNet® and DSX™ Docking Station ready
Rely on the Radius BZ1 Area Monitor to
protect your worksite from gas hazards
No other area monitor protects your workers longer in the
field with less setup, user training, and time in the shop.
LENS ™Wireless
The Radius BZ1 is available with optional LENS Wireless.
With LENS Wireless, your instruments will be connected
from the time you turn them on—with no need for setup
or additional infrastructure. You will instantly receive realtime gas readings from other connected instruments
on the network, helping your team react faster in
emergency situations.
www.indsci.com/radius
WEIGHT:
7.5 kg (16.5 lb)
TEMPERATURE RANGE:
-20 °C to 55 °C (-4 °F to 131 °F)
HUMIDITY RANGE:
15%-95% non-condensing (continuous)
DISPLAY/READOUT:
11.2 cm (4.4 in) monochrome backlit graphical liquid crystal display (LCD)
POWER SOURCE/RUN TIME:
Rechargeable nickel-metal hydride (NiMH) battery pack
7 days (168 hours) typical @ 20 ºC, without pump, with wireless
3.5 days (84 hours) typical @ 20 ºC, with pump, with wireless
30 days (720 hours) typical @ 20 ºC, electrochemical sensors only, without pump, with
wireless
≤8 hour recharge time
ALARMS:
108 decibel (dB) at 1 m (3.3 ft) redundant audible alarms
Redundant, visual alarm LEDs (red and blue)
MEASURING RANGES:
CATALYTIC BEAD
Combustible Gases:
0-100% LEL in 1% increments
ELECTROCHEMICAL
0-500 ppm in 1 ppm increments
Ammonia (NH3):
Carbon Monoxide (CO):
0-1,500 ppm in 1 ppm increments
Carbon Monoxide (CO High Range): 0-9,999 ppm in 1 ppm increments
0-1,000 ppm in 1 ppm increments
Carbon Monozide (CO/H2 Low):
Carbon Monoxide/Hydrogen Sulfide: CO: 0-1,500 ppm in 1 ppm increments
H2S: 0-500 ppm in 0.1 ppm increments
0-50 ppm in 0.1 ppm increments
Chlorine (CL2):
0-2,000 ppm in 1 ppm increments
Hydrogen (H2):
0-500 ppm in 0.1 ppm increments
Hydrogen Sulfide (H2S):
Hydrogen Cyanide (HCN):
0-30 ppm in 0.1 ppm increments
0-150 ppm in 0.1 ppm increments
Nitrogen Dioxide (NO2):
0-30% vol in 0.1% increments
Oxygen (O2):
0-150 ppm in 0.1 ppm increments
Sulfur Dioxide (SO2):
PHOTOIONIZATION
Volatile Organic Compounds (10.6 eV): 0-2,000 ppm in 0.1 ppm increments
PUMP:
Optional integral pump, up to 30.48 m (100 ft) sample draw
WIRELESS:
Optional LENS™ Wireless, proprietary mesh network
Frequency: ISM license-free band (2.4 GHz)
Max Peers: 25 devices per network group
10 independent, configurable network groups
Range:
300 m (~1,000 ft) line of sight
Encryption: AES-128
Approvals: FCC Part 15, Others**
SUPPLIED WITH MONITOR:
Calibration cup (without pump), sample tubing and pump inlet water barrier (with pump),
product manual, hand tool, charging power supply and region-specific cord
* These specifications are based on performance averages and may vary by instrument.
** See www.indsci.com/wireless-certifications for country-specific wireless approvals and certifications.
www.indsci.com
SINGLE GAS MONITORS
GasBadge® Pro
Single Gas Monitor
• Interchangeable “smart” sensors monitor oxygen or any
one of many toxic gases
• One year datalogging capacity (minimum)
• Standard STEL and TWA
• DSX™ Docking Station compatible
• HbCo detection option available
Built to Industrial Scientific's highest quality and
reliability standards, GasBadge® Pro provides a lifetime
of gas hazard protection for more applications than any
other single gas monitor available. With communication
directly through an infrared interface optional accessories
like the DSX Docking Station and Datalink, automated
calibrations, bump tests and datalog download could not
be easier.
SPECIFICATIONS
INSTRUMENT WARRANTY:
Guaranteed for Life. Instrument is warranted for as long as supported by Industrial
Scientific Corporation (excluding sensors, batteries, and filters). CO, H2S, and O2
sensors are warranted for 2 years. All other sensors warranted for 1 year.
CASE:
Rugged, water-resistant polycarbonate shell with protective concussion-proof overmold. RFI resistant.
DIMENSIONS:
9.4 x 5.08 x 2.79 mm (3.7 x 2 x 1.1 in )
WEIGHT:
85 g (3 oz)
SENSORS AND MEASURING RANGES:
CO: 0-1,500 ppm in 1 ppm increments
H2S: 0-500 ppm in 0.1 ppm increments
O2: 0-30% by vol in 0.1% increments
NO2: 0-150 ppm in 0.1 ppm increments
SO2: 0-150 ppm in 0.1 ppm increments
NH3: 0-500 ppm in 1 ppm increments
Cl2: 0-100 ppm in 0.1 ppm increments
ClO2: 0-1 ppm in 0.01 ppm increments
PH3: 0-10 ppm in 0.01 ppm increments
HCN:0-30 ppm in 0.1 ppm increments
H2: 0-2,000 ppm in 1 ppm increments
DISPLAY:
Custom LCD with graphical icons for easy use
Segmented display for direct gas readings
Backlight for low light conditions
“Go/No Go” display mode
Peak reading indication
ALARMS:
User selectable low and high alarms
Ultra-bright LEDs, loud audible alarm (95 dB) and vibrating alarm
BATTERY RUN TIME:
User replaceable 3V, CR2 Lithium battery, 2,600 hour run time, typical
DATA LOGGING:
1-year continuous storage of data
EVENT LOGGER:
Continually on. Logs last 15 alarm events, stamping how long ago the event occurred,
the duration of the event, and the peak reading seen during the event. Event-logger
can be viewed on PC or printed directly from the instrument to an infrared printer.
TEMPERATURE RANGE:
-40 ºC to 60 ºC (-40 ºF to 140 ºF), typical
HUMIDITY RANGE:
0-99% RH (non-condensing), typical
IP RATING:
Third-party certified IP64
SUPPLIED WITH MONITOR:
Attached suspender clip, calibration adapter and tubing, and operating instructions
www.indsci.com/GasBadgePro
Tango™ TX1
Single Gas Monitor
SPECIFICATIONS
INSTRUMENT WARRANTY:
Guaranteed for Life. Warranted for as long as the instrument is supported by Industrial
Scientific Corporation (excludes sensors, batteries, and filters). CO and H2S sensors are
warranted for three years. All other sensors are warranted for two years.
DISPLAY:
Segment liquid crystal display (LCD)
CASE MATERIALS:
Case top: Polycarbonate with a protective rubber overmold
Case bottom: Conductive polycarbonate
• DualSense Technology increases worker safety by using
two sensors to detect the same gas
• Guaranteed for Life with replaceable sensors and batteries
that extend the life of the instrument
• Optional AlarmAmp increases audible alarms to 110dB
By wearing the Tango TX1, workers will be the safest
single gas monitor users in the world. A patented
DualSense Technology increases worker safety,
regardless of bump test frequency, while reducing
overall costs. Let the Tango TX1 show you why two is
better than one.
DualSense Technology
The Tango ™ TX1 and Ventis ™ Pro Series incorporate
revolutionary patented DualSense ® Technology,
which includes two of the same type of sensor
to detect a single gas. The two sensor readings
are processed through a proprietary algorithm
and displayed as a single reading to the user.
DualSense Technology was developed to address
the major challenge of making sure workers are
always using fully functioning, reliable instruments
in the field. DualSense Technology ensures that
regardless of your current bump test policy, you
will be significantly safer than you would be using
an instrument without redundant sensors*.
*Based on iNet data
AlarmAmp™
For higher-noise environments, the Tango TX1 alarm
volume, typically 100 dB at 10 cm, can be increased nearly
10 dB with the addition of the optional patent pending
AlarmAmp™. The Tango TX1 alarm is louder than that of any
other single gas instrument on the market. The AlarmAmp
is available in black and safety orange.
www.indsci.com/TangoTX1
Patent No. 9,000,910 – DualSense® Technology | Patent No. 9,064,386 - AlarmAmp™
ALARMS:
Three strobe-emitting visual alarm LEDs (two red; one blue);
100 decibel (dB) audible alarm at a distance of 10 cm (3.94"); Vibration alarm
DIMENSIONS:
99 x 51 x 35 mm (3.9 x 2.0 x 1.4 in)
WEIGHT:
126.0 g (4.4 oz)
TEMPERATURE RANGE:
-40 °C to 50 °C (-40 °F to 122 °F); ATEX, IECEx, CSA, INMETRO and UL (C-US)†
HUMIDITY RANGE:
15%-95% Non-condensing (continuous)
SENSORS AND MEASURING RANGES:
Carbon Monoxide (CO):
0-1,000 ppm in 1 ppm increments
Hydrogen Sulfide (H2S):
0.0-200.0 ppm in 0.1 ppm increments
Nitrogen Dioxide (NO2):
0.0-150.0 ppm in 0.1 ppm increments
Sulfur Dioxide (SO2):
0.0-150.0 ppm in 0.1 ppm increments
BATTERY PACK:
3.6 V Primary lithium-thionyl chloride (Li-SOCl2); 1.5AH, 2/3AA; replaceable;
nonrechargeable; always on; 2-year run time depending on operating conditions
DATA LOGGING:
3 months at 10-second intervals
EVENT LOGGING:
60 alarm events
CERTIFICATIONS
INGRESS PROTECTION:
IP66; IP67
These specifications are based on performance averages and may vary by instrument.
* T he Tango is warranted to be free from defects in material and workmanship under normal and proper
use and service for 3 years from the initial purchase date.
†O
perating temperatures above 50 °C (122 °F) may cause reduced instrument accuracy. Operating
temperatures below -20 °C (-4 °F) may cause reduced instrument accuracy and affect display and alarm
performance.
ACCESSORIES
Sampling Pumps:
Sampling pumps provide the ability to check for the presence of potentially
hazardous atmospheres in a remote area or confined space. All sample pumps
include low flow indicators. Pumps come with 10 feet of tubing and detailed
operating instructions. Additional tubing is available for long distance remote
sampling.
Sampling Probes
Industrial Scientific offers sampling equipmnet that best suits the needs of most
any remote sampling requirement. Our probes are available in many sizes and
types and are used in conjunction with Industrial Scientific sampling pumps.
Tubing kits and filters help in registering adequate air flow for the sample reading.
Probes shown:
18101386 – 6' Extendible Stainless Steel Probe fully extented
18103309 – Aluminum Coiled Probe (800-900 °F)
18102111 – 4.5' Folding Probe with tubing, folded with case and fully extended
Tubing Kits:
The depending on your needs universal urethane and Teflon sample tubing kits
are offered in specific lengths of 10, 20, 30, 40, 50, 60, 70, 80, 90, and 100 feet.
Additional Sampling Equipment:
Adequate air flow is critical for proper remote sampling. All filters should be
replaced when dirt or water inhibits air flow. Quick disconnect fittings allow
easy, no-fuss connection to secure tubing to sampling pumps.
Confined Space Kits
Each day, workers open hatches, remove covers and enter the depths of
confined spaces found in almost every industry. Best practice and the law both
say that the air inside the space should be tested to ensure that it is safe prior
to going inside. Industrial Scientific Confined Space Kits are ideally suited for
customers that would like to use their monitors for confined space entries. The
kit provides users with everything needed to operate their instrument, as well
as perform calibrations and bump tests.
Calibration Gas:
Industrial Scientific's calibration cylinders are manufactured to the highest quality
standards and include NIST-traceable blend techniques, analytical leak testing
of every cylinder, certified component concentrations and clearly marked lot
numbers and expiration dates. Replacement cylinders are available in a variety of
sizes and concentrations.
Calibration kits come equipped with everything necessary to keep your instruments
operating reliably. Kits contain certified NIST-traceable span gases for safe, reliable
instrument calibration. Kits are available for all installed sensors and include:
• Convenient Carrying Case
• Non-refillable Cylinders
• Flow Regulator
Regulators:
Regulators provide the proper flow rate for calibrating your instrument. Always
make certain to use the appropriate regulator for the application as recommended
in the Instruction Manual.
Docking Stations:
The DSX Docking Stations provide the ultimate flexibility for managing your gas
monitors. A docking station gives you the benefits of automated calibration, record
keeping, battery recharging, and instrument diagnostics.
Replacement Sensors:
Replacement sensors are available for the MX6 iBrid, Ventis MX4, Ventis Pro
Series, GasBadge Pro, Tango TX1, and BM25. Visit www.indsci.com/products/
accessories/portable/#replacement-sensors for a complete list of the available
sensors.
Chargers and Batteries:
By using additional charging accessories, instrument operation can continue
uninterrupted. When a battery is low, simply replace it with a spare pack and
continue monitoring. Or, utilize a compact charger to charge your battery pack.
Carrying Cases:
Cases can be ordered for the MX6 iBrid, Ventis MX4, Ventis Pro Series, GasBadge
Pro, and Tango TX1. They range in material to suit your application.
www.indsci.com
SERVICES
Auto Replenishment
The calibration gas auto replenishment program is the most efficient way for
customers to manage their calibration gas usage and needs. For those who elect
to have the program as part of their iNet subscription, a new cylinder of gas will
automatically be sent when iNet Control detects a low gas cylinder.
Rental
We offer flexible rental periods and rates from weekly, monthly to long-term. We have
fast, same-day shipping for over 5,000 available products. And, each gas detector
arrives calibrated and ready to use.
Commissioning
Industrial Scientific technicians install all systems correctly and in proper operating
order. This eliminates the need to reassign employees or search for specialized
technicians and contractors. We even provide training for equipment operation,
maintenance and calibration.
Repair
Our own skilled technicians provide fast, quality service using only factory-original
parts. We repair exactly to your requirements and offer software upgrades at no cost.
Training
Industrial Scientific training courses are designed to help seasoned veterans and
newcomers. Students develop a better understanding of hazardous gas atmospheres
and how to use our gas detectors more effectively. Training courses are offered at
several convenient locations throughout the world. We can even provide customized,
on-site sessions tailored to your company’s specific needs.
Customer and Technical Support
We offer a wide variety of support services to help you. Contact us with your order,
product application, service or technical questions. Our friendly and knowledgeable
professionals are ready to help you!
For our complete line of services, products
and accessories Visit our web site at
www.indsci.com
REV 1016 | © 2016 Industrial Scientific Corporation
AMERICAS
www.indsci.com
Phone: +1-412-788-4353 | Fax: +1-412-788-8353
1-800-DETECTS (338-3287) North America
info@indsci.com
ASIA PACIFIC
Phone: +65-6561-7377
Fax: +65-6561-7787
info@ap.indsci.com
EMEA
Phone: +33 (0)1 57 32 92 61
Fax: +33 (0)1 57 32 92 67
info@eu.indsci.com
Download PDF
Similar pages
Ventis MK2 Filter Change Guide PDF
BM25_Literature
moteur
boitier
support
support
Field Guide - Air
Ventis Server Safe PDF
to Go Pro! - Air
Ventis Server Safe
Pump up your gas detection program