ApeosPort-VI
DocuCentre-VI
C7771 / C6671 / C5571 / C4471 / C3371 / C3370 / C2271
C7771 / C6671 / C5571 / C4471 / C3371 / C3370 / C2271
All product names and company names mentioned in this brochure are trademarks or registered trademarks of their respective companies.
Reproduction Prohibitions Please note that reproduction of the following is prohibited by law :
Domestic and foreign currencies, government-issued securities, and national bonds and local bond certificates. Unused postage stamps, post cards, etc.
Certificate stamps stipulated by law. Reproducing works forming the subject matter of copyright (literary works, musical works, paintings, engravings,
maps, cinematographic works, drawings, photographic works, etc.) is not permitted unless the reproduction is for the purpose of personal use, family use
or other similar uses within a limited circle.
For Your Safety
Before using the product, read the Instruction Manual carefully
for proper use. Use the product with the power source and voltage
specified. Be sure to establish ground connection. Otherwise,
electronic shock may result in the case of a failure or short circuit.
ApeosPort-VI
Supported by AMDP Catalogue on Demand
ISO 50001 : 2011
Certificate No.: CC 5473
ISO 14001 : 2015
Certificate No.: CC 2639
C7771 / C6671 / C5571 / C4471 / C3371 / C3370 / C2271
membership no. CL-8339-0436
Fuji Xerox (Hong Kong) Limited
11/F Cityplaza 4, 12 Taikoo Wan Road, Quarry Bay, Hong Kong
Tel: (852) 2513 2888
Fax: (852) 2560 6433
DocuCentre-VI
Customer Support Center
Hong Kong
Tel: (852) 2513 2513
Fax: (852) 2513 2518
Macau
Tel: (853) 2855 8008
Fax: (853) 2857 4996
Email:
hkcsc@hkg.fujixerox.com
Website:
Facebook:
LinkedIn:
YouTube:
C7771 / C6671 / C5571 / C4471 / C3371 / C3370 / C2271
Smart Work Gateway, a new beginning!
http://www.fujixerox.com.hk
http://www.facebook.com/FujiXeroxHongKong
http://www.linkedin.com/company/fuji-xerox-hong-kong
http://www.youtube.com/FujiXeroxGlobal
Your trusted ICT Partner in providing leading Document Services and Communication
Xerox, Xerox and Design, as well as Fuji Xerox and Design are registered trademarks or trademarks of Xerox Corporation in Japan and/or other countries.
The contents described herein are correct as of October, 2016.
Smart Work Gateway
“Smart Work Gateway” enables seamless links between communication devices
and various cloud services for information management and transmission.
This gateway offers excellent usability to accelerate communication
through a user interface finely tuned to the flow of your work.
It also leads to another dimension of communication which further automates
informational processes, realizes advanced systemization, and eliminates
cumbersome procedures within businesses operation.
A new dimension of communication is offered to each and every individual and
organization to easily, simply and safely register, share, search, distribute and
output the necessary information in the required format without constraints to
time or place. Taking the advantages of Smart Work Gateway will connect
business people, promote the use of information, and supports the creation of
new corporate value.
* What is Smart Work
Smart Work Gateway supports diverse work styles to facilitate greater understanding and drive higher performance
from everyone in an open and worry-free communication environment.
2
ApeosPort-VI
C7771 / C6671 / C5571 / C4471 / C3371 / C3370 / C2271
DocuCentre-VI
C7771 / C6671 / C5571 / C4471 / C3371 / C3370 / C2271
3
Smart Work Gateway
Harmonizing paper with digital, for smooth and timely communication.
At the office
On the go
Why bother carrying large amounts of
printed materials to meetings? Just print
them from a MFD close to the meeting room.
Usage by user or MFD
can be easily displayed.
Even if someone else is using the MFD,
you don't have to wait.
Just print from a MFD that's available.
The MFD responds when a user
comes close and quickly recovers
from the sleep mode.
It helps to know your
day-to-day costs.
Smooth authentication
with IC cards.
Pi!
"MFD" is an abbreviation for "Multifunction Device".
MFD Awaken by Users
Swift authentication
Printing from any machine
Visualising your usage records
Smart WelcomEyes
Server-less authentication linkage
Server-less On-demand
Device Log Service
A camera installed in the MFD detects the user and the device
automatically recovers from the sleep mode. Even if the device is always
set to sleep mode, which offers excellent energy saving performance, it
can be used immediately without compromising user convenience.
If user information is registered to a single MFD, it can be automatically
shared with other devices. This allows authentication from any device.
Users can be registered by simply swiping their IC card, which helps
reduce administrator work.
Even if the MFD that you chose to print out is in use, you can print from
another MFD. You do not need a special server to use this function. Jobs
can be printed even without authentication.
The usage records of MFDs in the office
can be automatically totalized. Cost
awareness can be achieved by visualizing
the actual usage of MFDs. It promotes
TCO reduction.
Note:Optional
Note:Optional. Requires an IC card reader.
Smart WelcomEyes Advance 2
EasyUI Solution 2
User faces can be identified by installing
the Smart WelcomEyes Advance
face recognition camera. On top of
performing authentication without
using an IC card, the operation screen
can be customised to the preference of
each user.
Once authenticated, a customised
screen appears on the control panel.
Users can customise the screen to only
display function buttons that they often
use, may it be Scan, Copy, and Scan to
Folder.
Note:Optional. The device authentication
mode must be enabled.
4
face recognition
Note:Easy UI Solution 2 added application
must be installed.
[Various benefits]
- Concentration of printing from a specific network connected MFD can
be avoided. Optimised device operations help reduce the number of
devices in the office.
- Wasteful printing is reduced by deleting or correcting incorrect print
jobs from the MFD control panel.
- Printing is executed only after operations on the MFD's control
panel. It's effective in reducing forgotten prints and in securing your
documents.
A customised user screen is
displayed
Note:A Cloud service provided by Fuji Xerox.
A separate contract is required to be
concluded.
Usage status confirmation
screen on the device
Serverless Device Management
Multiple MFDs can be efficiently utilised while raising cost awareness,
without the need to build a server. Efficiency is promoted without
placing a burden on employees, including the administrator. Proposing
the creation of such systems is a strength of Fuji Xerox.
5
Smart Work Gateway
Communication to whomever, whenever, where ever.
On the go
Beyond department barriers
When you receive a fax while you are on the go,
the MFD automatically uploads the fax data to
the Cloud.
An e-mail tells you when faxes are
received.
Since you can see the faxes on
your mobile device, there is no
rush back to the office.
Making the best of information
away from office
p
Smartphone images captured for the
purposes such as for market research
can be directly printed at your partner
company in case of immediate
meetings.
Back at your office, reports and receipts can
be registered to a folder simply by pressing
the scan button.
It just makes your daily work more reliable
Sna
During business talks, you can
show materials stored in the
Cloud to your customer from
your iPad.
Print them out,
as required.
Easy printing where you are
Supporting various environments
Scanning & sending made so simple
Working Folder
Cloud On-Demand Print
Wi-Fi Direct®
Scan Delivery
Received fax documents are automatically uploaded to the "Working
Folder cloud service provided by Fuji Xerox. E-mails are sent to your
smartphone or tablet device so that you can check your faxes when
you're on the go.
When you urgently need to print something when you are away from
the office or on-site, relax. You can print your documents by simply
entering your ID and password on an MFD or entering a seven digit
print reservation number as a shared user, without the trouble of setting
a printer driver or network each time.
Even when the internal network environment cannot be used by the
mobile device of a visitor or the personal mobile device, the device can
directly connect to the MFD via a Wireless LAN Converter to output
documents.
By pressing a pre-set button on the MFD's control panel, documents
can be scanned and stored with a file format and destination set in
advance. File names can be created with a custom string set on a PC
combined with the document type and date. It makes documents
easier to search for.
Note:A Cloud Service provided by Fuji Xerox. A separate service contract is
required.
[Solid security measures]
If you upload documents to Working Folder such as the latest
presentations and catalogs, they can be downloaded, browsed and
uploaded while you're on the field or when visiting a customer. SSL
communication and encrypted storage assure the security of your
stored data. You can handle the customer's requests efficiently,
securely, and quickly on the spot.
6
Note:A Cloud Service provided by Fuji Xerox. A separate service contract is
required.
Print Utility
The Print Utility is a print/scan application for mobile devices running
on software such as iOS and Android. With the support of NFC (Near
Field Communication), you can print and scan on a MFD from Android
devices simply by tapping the device on a card reader.
Note:Requires an IC card reader.
Note:Optional
Secondly Ethernet
The device is equipped with two Ethernet ports to accommodate two
different networks. For instance, one can be used for the company LAN
while the other for visitors, or, one for a mission-critical system and the
other for the general office. Even in a situation where two companies
share an office, the separation of networks will provide a secure printing
environment.
Note:Optional
Note:Print function only. Only the TCP/IP (Ipd, port 9100) protocol is supported.
Note:Optional
Creating new working styles to suit the changes of
times
Even if you are contacted while on the go, you can quickly respond
without returning to the office. Daily reports can be swiftly created
with simple operations. Fuji Xerox offers diverse work styles to drive
higher performance from working people.
7
Smart Work Gateway
Various corporate needs are accommodated in total with the same product lineup.
Beyond department barriers
<General affairs/IR>
Business reports and annual reports can be printed
in large quantities and smoothly processed with
high-speed printing and finishing.
Beyond size & skill
<Design>
In addition to digitising large quantities of documents,
schematics can be quickly folded so that they are suitable
for filing.
<Graphic design>
When it comes to printing documents such as
comprehensive layouts and leaflets, Fuji Xerox MFDs can
satisfy the needs to reproduce quality images and texts.
<Promotion/sales>
Experience the effectiveness in POP and package
production with the wide variety of paper types, sizes,
and weights the device can handle.
Disclo
Disclosure
sur
Dis20
XX
clo
sure
Dis20
XX
clo
suree
Dis20
XX
clo
sur
Dis20
XX
clo
suree
Dis20
XX
clo
sur
Dis20
XX
clo
20
suree
XX
20XX
Disclosure
20XX
[Highly efficient]
with waste-free operations
[Highly productive]
with convenience
[High image quality]
with sharp images
[Highly versatile]
for more variation
Contribution of TCO reduction
High-speed scanning in large quantities
Newly-developed Super EA-Eco toner adopted
Thin and heavyweight paper all supported
The product line-up covers a wide range of speeds from 25 to 70 ppm.
By adopting multiple devices, the optimal placement based on usage
together with standardized operations and configuration methods can
all be achieved. The IH-Fuser and LED print head of these devices also
contributes to energy saving.
Devices are equipped with a duplex
automatic document feeder that can scan
both sides of a document at once. It achieves
an astonishing high-speed scanning of 270
pages per minute.*1 Up to 250 sheets*2 can be
loaded.
High resolution of 1200 x 2400 dpi is an eye-opener. Even more
remarkable is the new toner, which grain size is the smallest in the
industry. This combination produces clear and sharp text and lines
with smooth gradations. Half-tones are also beautifully reproduced to
allow smooth printing such as the softness of a baby's skin and natural
gradations of a blue sky.
The standard tray can handle paper between 52 to 300 gsm. In
addition to printing envelopes, this MFD can satisfy your needs for
printing sales promotion materials such as POP and packaging in small
lots.
Immediately Cloud services ready
Devices are preinstalled with an application for directly accessing
Cloud services for printing and scanning. If your office is already using
Cloud services, the services can be used immediately after the MFD is
installed.
*1 With the C7771/C6671. 154 pages per minute
for the C5571/C4471/ C3371/C3370/C2271.
*2 With the C7771/C6671. 130 pages per minute
for the C5571/C4471/C3371/C3370/C2271.
Automation of a series of processes, including Z-folding
Various finishers* are available. When outputting A4 documents that
include several A3 drawings, the A3 sheets can be Z-folded, the whole
bundle stapled and hole-punched to create an A4 file.
Motivating in-house printing
In addition to high image quality, the devices provide easy-to-use
image quality adjustments* that catch the heart of those users who are
keen for higher quality. Even for printed materials that need that extra
appeal, this MFD will promote your in-house printing together with
higher speeds and lower costs.
* Adjust Paper Registration,Density Uniformlty Adjustment,Print Head
Alignment,Adjust Image Transfer
Printing on long paper supported:
suitable for creating banners
Long paper up to 320 x 1200 mm* is
supported.
* The printable area is 305 x 1194 mm.
Note:Only supported by the PCL driver and
the Windows version of the Adobe®
PostScript®3™ driver.
* Optional. For details, see P. 13.
8
9
Smart Work Gateway
Effective solutions offered to resolve your challenges.
Transcending differences in scope and skill
Solving your scanning mistakes
Utilize multiple cloud services in bundle
I can't scan the way I want it…
Scanning becomes simple, like with a camera's auto mode
The orientation of my scanned images are off
by 90 degrees. The back side is up-side-down
compared to the front side.
"Scan Auto"* automatically detects document orientation, whether the document is onesided or two-sided, and whether there is a mix of one-sided and two-sided sheets. By simply
loading the document and pressing the start button, scanning becomes easy.
Scanned documents can be saved to a PC or sent via e-mail."
Deciding which service to use and
which to login to is a pain when
using several cloud services…
DEF
ABC
GHIJK
* This application is embedded in the MDF.
ABC
DEF
The orientation of my scanned data is
all mixed up…
GHIJK
OCR technology is utilised to
automatically align the orientation
of documents, skip blank pages, and
save files by specifying a pre-registered
filename. All corrections that had to
be performed one by one on a PC can
now be automated.
Communication and logging in becomes
troublesome when cloud services differ
between my company and our partners…
Cloud
Cloud
Service
Service
A
A
Cloud
Cloud
Service
Service
C
C
pas6f
pas6f
9eg5j
9eg5j
Log into multiple cloud services with one ID and password
Cloud Service Hub* manages the access permission information for cloud services that
customers are using. You can use all of these cloud services with a single login.
Searches across multiple cloud service can be performed and Office® documents that are
found by your search can be printed out directly from the multifunction device.
Scan documents can also be saved by specifying the storage location of cloud service.
* A Cloud printing service provided by Fuji Xerox. A separate service contract is required.
Cloud
Cloud
Service
Service
B
B
w8aro
w8aro
Google
Google
Drive
Drive
TM
TM
Cloud
Cloud
Service
Service
D
D
1step
3 step
Scan
10
Change file name
Send to designated folder
As with "Scan Auto", the scanned
images can be automatically aligned
correctly, blank pages can be omitted
and a filename can be automatically
generated, etc. Filenames registered
in advance can also be specified, and
folders can also be automatically
generated based on the date and
authenticated user, and finally sorted.
Operations for the batch scanning of
documents, dividing by blank page or QR
code, sorting by QR code, and assigning
filenames can also be achieved.
When using the DocuWorks format,
attribute information such as document
names and document properties can be
assigned from the MFD.
Evernote
Evernote
TM
vd548
vd548
Working
Working
Folder
Folder
TM
OneDrive
OneDrive
TM
Scanned documents don't reach
my new PC..
* Optional
SharePoint
SharePoint
Online
Online
Cloud Service Hub
Cloud Service Hub
Digitizing a large quantity of
documents is troublesome…
With "Scan Delivery*", scan operation workflows can be pre-set as a menu item. By simply
selecting the pre-set menu item and scanning a document, the entire scan operation
including saving (including to folders on the Cloud), sorting and sharing can be automated.
Every time someone new joins our office or
when a PC is replaced, I have to go through
the trouble of looking up setup procedures in
the manual.
TM
TM
TM
Setup procedures checked on the spot
Managing and utilising standard documents
(invoices, contracts, and orders, etc.) efficiently
takes a lot of work.
Box
TM
Dropbox
Dropbox
Streamlined saving and sharing of standard documents
Anyone can easily digitize documents with simple steps
Box
TM
Cloud services can be used even
without a computer if there is a
multifunction device.
You can also use it from your
smart phone to perform your
usual tasks anytime, anywhere.
Help information displayed on the control panel
Setup procedures can now be accessed from the control panel of the MFD. FAQ and keyword
search functions are provided to speed up your work, without the need to read a manual. As
help information is managed on the Cloud server, it is updated with frequent asked questions.
Help
Support
Help information can also be printed
out and displayed on mobile devices
(some videos can also be viewed
on mobile devices). Your can setup
your device while looking at help
information on paper or a mobile
device instead of from the control
panel.
11
Convenient & Energy Efficient
With more variation
Energy saving, TCO reduction, and environmental friendliness, all in good hands, without your
special attention.
Variations to types of post-processing such as Z-folding and tri-folding increase by attaching a
Finisher.
"RealGreen" for convenience and
environmental friendliness
RealGreen* is a Fuji Xerox concept that refers to technology and services
that deliver both energy saving and convenience. It is to provide
excellent environmental performance while allowing users to focus on
their job, without their extra work. The spirit of RealGreen is also alive in
the new Fuji Xerox MFDs.
* "RealGreen" is a registered trademark of Fuji Xerox.
Smart power saving that only powers up device units
to be used
The devices has also been re-designed according to customer requests
to reduce the sound made when outputting two-sided documents
and the high pitched noise emitted by the tray module, in addition to
optimizing the paper transport pathway and control, while improving
the mechanical parts. The devices have evolved to become even quieter
than previous models.
High speed recovery from sleep mode with an instant
heating IH-Fuser
Achieving outstanding TEC values
As a result, a fusing unit with the quickest start-up time of only 4 seconds or less*
providing Fuji Xerox with a tremendous competitive edge.
*2
These devices achieve 0.8 kWh for their TEC
value*1, which is the standard for conforming to the
International Energy Star Program. This greatly
contributes to reduced power consumption.
*1: Value derived based on the method defined by the
International Energy Star Program.
TEC Values
[CPS model]
C7771 3.3 kWh
C6671 3.1 kWh
C5571 2.4 kWh
C4471 1.9 kWh
C3371 1.3 kWh
C3370 1.1 kWh
C2271 0.8 kWh
*2: With the C2271 CPS model
*With the C3371/C3370/C2271.
These devices adopt bio-based plastic parts that use cellulose obtained
from wood-based material rather than plant-based material. Recycled
plastic is also used in some of the exterior parts.
Values provided by the ApeosPort series
In addition to excellent expandability and customizability, the ApeosPort series provides functions to contribute to reduce administration work
and prevention of information leaks.
The ApeosPort series will enhance the information infrastructure of your company while promoting an environment that enables each
employee to focus on their work.
* Requires ApeosWare Management Suite 2.
12
Saddle Staple
Z Fold Half Sheet
Tri-fold
A hole punch process can be
used for filing documents in
binders.
This Single Fold and stapling
process is ideal for creating
catalogues and booklets.
Z Fold Half Sheet is a useful
method to combine A3
documents into A4 size.
The C-fold is useful when
creating materials enclosed
in envelopes.
Further enhanced security
- By importing a device certificate to a
MFD, digital signatures and encrypted
communication based on S/MIME can be
performed when sending e-mail/Internet
faxes.
- By attaching a digital signature to scanned
documents, modifications to files can be
detected and sender falsification can be
prevented.
Stapling thickness
Finisher-A2
Finisher-B1 +
Booklet Maker Unit
for Finisher-B1
C3 Finisher
C3 Finisher with
Booklet Maker
C3 Finisher with
Booklet Maker +
Folder Unit CD1
50 sheets*1
50 sheets
50 or 65 sheets*2
50 or 65 sheets*2
50 or 65 sheets*2*3
2/4 hole punch*4 or
2/4 hole punch*6 or
2/4 hole punch*6 or
2/4 hole punch*6 or
2/3 hole punch*7
Punch
—
Saddle Staple
—
*8
Single Fold
—
*8
Tri-fold
—
—
—
—
*9
Z Fold Half Sheet
—
—
—
—
*9
—
500 sheets
500 sheets
500 sheets
2000 sheets
3000 sheets
1500 sheets
1500 sheets
Output tray
—
Paper
capacity*10 Finishing tray 500 sheets
2/3 hole punch*5
2/3 hole punch*7
Image log
The image log function enables the job log
(including the user, usage time, and number
of copies) and the image itself to be stored
and managed. This enables investigations
to proceed smoothly should a confidential
document be leaked.
Note:Requires ApeosWare Image Log
Management.
2/3 hole punch*7
—
—
*1:A4 size. Max. 30 sheets with B4 or larger. 64 gsm paper
*2: C3 Finisher Staple Unit 65 Sheets is required. 64 gsm paper
*3: Finisher capacity decreases when Z-fold half Sheets are mixed.
*4: 2/4 Hole Punch Kit for Finisher-B1 is required.
*5: US 2/3 Hole Punch Kit for Finisher-B1 is required.
*6: Punch Unit 2H/4H is required.
*7: Punch Unit US 2H/3H is required.
*8: Booklet Maker Unit for Finisher-B1 is required. For the features of Saddle
Staple or Single Fold, Finisher B1 does not perform folding but perform scoring.
*9: Folder Unit CD1 is required.
Bio-based plastic/recycled plastic adopted
Authentication by user information
registered in a server
Your administrative work will be greatly
reduced by using a server registered with
user information for authentication, rather
than setting user information in each MFD.
Available functions and color output can
also be restricted* on a user basis. In
addition, users who are not registered in the
server (such as a temporary staff) can also
be permitted use the MFDs.
Punch
Stapling multiple pages
documents, such as meeting
materials into sets, is
available.
Enhanced low-noise design
Smart power saving divides the MFD into four units (the document
feeder, control panel, output unit, and controller), and only powers up
the units whatever is currently required. It is a smart way to reduce both
power consumption and CO2 emissions.
High speed recovery from sleep mode Induction Heating Fusing Technology
incorporates a thin, non-magnetic metal as the heating layer inside the fuser belt
which enables greater energy efficiency. With this technology, the fusing unit
does not require pre-heating and doesn't consume power when the machine is
in standby mode.
Stapling
*10: 64 gsm paper
Note:C3 Finisher or C3 Finisher with Booklet Maker requires Transport Unit H1.
Note:F inisher-A2 can only be attached to C5571,C4471,C3371,C3370 and
C2271.
Note:F inisher-B1 can only be attached to C5571,C4471,C3371,C3370 and
C2271.
3 Way output & large capacity paper feeding
Larger and easier to read Help information
Paper can be output per copy, print and fax jobs. Requirements for
large capacity output can be satisfied with the HCF (single stack)
and Tadem Tray.
The 10.4 inch Full Size Colour UI panel can be tilted up/down/
left/right to accommodate an easier operation posture. The Help
information is large, providing easiness to read.
Note:Optional
1 S ide Tray
2 Inner Output Tray
Paper output can be distributed per job
3 HCF (High Capacity Feeder: single stack)*
4 Tandem Tray
1
2
* Optional
3
4
13
Specifications of
ApeosPort-VI C7771 / C6671 / C5571 / C4471 / C3371 / C3370 / C2271
DocuCentre-VI C7771 / C6671 / C5571 / C4471 / C3371 / C3370 / C2271
Basic Specifications/Copy Function
Print Function
Item
Item
Type
Continuous Print
Speed*1
Print Resolution
Standard
Page
Description Optional
Language
Supported Standard
Operating (PCL Driver)
System*2
Description
C7771
C6671
C5571
C4471
C3371
C3370
C2271
Type
Desktop/Console
Memory capacity
4 GB (Max: 4 GB)
160 GB or larger (Usable space: 128 GB)
Hard disk capacity*1
Colour Capability
Full Colour
Scan Resolution
600 x 600 dpi
Printing Resolution
1200 x 2400 dpi (High Resolution Photo)
600 x 600 dpi (Text / Text-Photo / Photo / Map)
Warm-up Time
When Embedded Plug-ins / Custom Services are enabled*2 36 seconds or less, 30
seconds or less, if the main power is on. (At room temperature 23ºC)
When Embedded Plug-ins / Custom Services are disabled*2 30 seconds or less, 24
seconds or less, if the main power is on. (At room temperature 23ºC)
Original Size
Maximum of 297 x 432 mm (A3, 11 x 17") for both Sheet and Book
Paper Size Max
SRA3 (320 x 450 mm), 12 x 18" (305 x 457 mm), A3
[12 x 19" (305 x 483 mm) when using Bypass Tray]
Min
A5 [89 x 98 mm when using Bypass Tray]
Image loss Lead Edge 4.0 mm, Trail Edge 2.0 mm, Right & Left Edges 2.0 mm
width
Paper Tray 52 to 300 gsm
Paper
*3
Weight
Bypass Tray 52 to 300 gsm
First Copy Output Time (A4 LEF)
*4
3.3 sec.
3.3 sec
3.7 sec.
4.4 sec.
4.9 sec.
4.9 sec.
6.3 sec.
B/W
4.1 sec.
4.1 sec.
5.2 sec.
5.7 sec.
6.7 sec.
6.7 sec.
8.7 sec.
Colour*5
Continuous A4 LEF / B5 B/W: 70
B/W: 65
B/W: 55
B/W: 45
B/W: 35
B/W: 30
B/W: 25
*6
Copy Speed LEF
Colour: 70 Colour: 65 Colour: 55 Colour: 45 Colour: 35 Colour: 30 Colour: 25
A4 / B5
B/W: 50
B/W: 47
B/W: 40
B/W: 32
B/W: 27
B/W: 23
B/W: 19
Colour: 50 Colour: 47 Colour: 40 Colour: 32 Colour: 27 Colour: 23 Colour: 19
B4
B/W: 41
B/W: 38
B/W: 32
B/W: 26
B/W: 23
B/W: 20
B/W: 16
Colour: 41 Colour: 38 Colour: 32 Colour: 26 Colour: 23 Colour: 20 Colour: 16
A3
B/W: 35
B/W: 32
B/W: 27
B/W: 22
B/W: 19
B/W: 17
B/W: 14
Colour: 35 Colour: 32 Colour: 27 Colour: 22 Colour: 19 Colour: 17 Colour: 14
Paper Tray Standard [4 Tray Model:]
500 sheets x 4 Tray + Bypass Tray 90 sheets
Capacity*7
[Tandem Tray Model:]
500 sheets x 2 Tray +860 sheets + 1125 sheets + Bypass Tray 90 sheets
Optional
HCF B1: 2030 sheets
Max
4 Tray Model: 4120 sheets (4 Tray Model + HCF B1)
Tandem Tray Model: 5105 sheets (Tandem Tray Model + HCF B1)
*8
Output Tray Capacity Upper Center: 250 sheets (A4 LEF), Lower Center: 250 sheets (A4 LEF)
Power Supply
AC220-240 V +/- 10 %, 10 A, 50/60 Hz common
Maximum Power
[C7771 / C6671 / C5571 / C4471]
Consumption
2.2 kW (AC220 V +/- 10%)
2.4 kW (AC240 V +/- 10%)
Sleep Mode: 0.5 W (AC230 V)
Ready Mode: 111 W (AC230 V)
[C3371 / C3370 / C2271]
2.2 kW (AC220 V +/- 10%)
2.4 kW (AC240 V +/- 10%)
Sleep Mode: 0.5 W (AC230 V)
Ready Mode: 75 W (AC230 V)
Dimensions
[C7771 / C6671 ]
W 663 x D 793 x H 1169 mm
[C5571 / C4471 / C3371 / C3370 / C2271]
W 669 x D 723 x H 1141 mm (Without Adjusting Foot width 663mm.)
156 kg
4 Tray Model : 132kg
Weight*9
Tandem Tray Model : 139kg
*1 The Storage Hard disk capacity is not totally available for customers.
*2 Embedded Plug-ins / Custom Services are enabled as factory default. You can change the settings if needed.
*3 I t is recommended to use Fuji Xerox recommended paper. Correct print output may not be possible depending on the
requirement.
*4 A4LEF / Monochrome priority mode.
*5 A4LEF / Colour priority mode.
*6 The unit is sheets / minute. The speed may be reduced due to the image quality adjustment.
*7 80 gsm paper.
*8 64 gsm paper.
*9 Excluding Toner Cartridge.
Interface
Fax Function ( Optional )
C3 Finisher / C3 Finisher with Booklet Maker ( Optional )
Item
Original Size
Recording Paper Size
Item
Type
Transmission Time
Transmission Mode
Applicable Lines
Description
Built-in type
Same as the Basic Specifications / Copy Function
Description
Max: A3, 11 x 17", Long document (Longest 600 mm)
Max: A3, 11 x 17"
Min: A5
2 seconds and more but fewer than 3 seconds*1
ITU-T G3
Telephone subscriber line, PBX, Fax communication (PSTN), Maximum 3 ports*2 (G3-3
ports)
*1 W
hen A4 size document with approximately 700 characters is transmitted in standard image-quality (8 x 3.85 lines /
mm) and in high-speed mode (28.8 kbps or faster, JBIG). Only indicates the time for transmitting the image information
and does not include the communication control time. The total communication time will vary depending on the
contents of the document, the type of machine receiving the fax, and line condition.
*2 No.of FAX lines is up to 3 ports. Port refers to number of channels for FAX.
600 x 600 dpi, 1200 x 1200 dpi, 1200 x 2400 dpi
PCL5 / PCL6
Adobe® PostScript® 3™
Windows® 10 (32bit), Windows® 10 (64bit), Windows® 8.1 (32bit), Windows® 8.1
(64bit), Windows® 8 (32bit), Windows® 8 (64bit), Windows® 7 (32bit), Windows® 7
(64bit), Windows Vista® (32bit), Windows Vista® (64bit), Windows Server® 2012 R2
(64bit), Windows Server® 2012 (64bit), Windows Server® 2008 R2 (64bit), Windows
Server® 2008 (32bit), Windows Server® 2008 (64bit)
Standard (Mac OS X 10.11/10.10/10.9/10.8, Mac OS X 10.7/10.6
OS X Driver)
Optional
Windows® 10 (32bit), Windows® 10 (64bit), Windows® 8.1 (32bit), Windows® 8.1
(Adobe®
(64bit), Windows® 8 (32bit), Windows® 8 (64bit), Windows® 7 (32bit), Windows® 7
PostScript® 3™ (64bit), Windows Vista® (32bit), Windows Vista® (64bit), Windows Server® 2012 R2
Driver)
(64bit), Windows Server® 2012 (64bit), Windows Server® 2008 R2 (64bit), Windows
Server® 2008 (32bit), Windows Server® 2008 (64bit)
OS X 10.11/10.10/10.9/10.8, Mac OS X 10.7/10.6
Standard Ethernet 1000BASE-T / 100BASE-TX / 10BASE-T, USB3.0
HCF B1 ( Optional )
Side Tray
Item
Paper Size
Paper Weight
Feeding Capacity
/ Number of Tray*1
Dimensions
Weight
Item
Paper Capacity*1
Dimensions
Description
A4 LEF, Letter LEF, B5 LEF
55 to 216 gsm
2030 sheets x 1-tray
Item
Type
Paper Size
Staple
Paper Size
Duplex Automatic Document Feeder B1-PC
Original Size /
Paper Weight
Capacity*2
Copy
Scan
Speed*3
Scan
Capacity
C2271
B/W: 25
sheets/minute
Colour: 25
sheets/minute
*1 The minimum custom size is 125 x 85 mm.
*2 6
4 gsm paper.
*3 T
he scanning speed varies depending on the documents.
*4 1
60 ppm for both B/W and colour when Quiet Mode is disabled. This setting can be changed to suit the customer's
usage.
Position
Dimensions / Weight
Finisher-B1 ( Optional )
Paper Weight*2
Paper Capacity*3
Duplex Automatic Document Feeder C1-PC
Item
Type
Original Size /
Paper Weight
Capacity*2
Copy
Scan
Speed*3
Scan
Description
C7771
C6671
1 pass, 2 sided scanning Duplex Automatic Document Feeder
Max: A3, 11 x 17"; Min: A6*1
38 to 200 gsm (In Duplex: 50 to 200 gsm)
250 sheets
B/W: 70 sheets/minute
B/W: 65 sheets/minute
Colour: 70 sheets/minute
Colour: 65 sheets/minute
B/W: 135 sheets/minute, Colour: 135 sheets/minute
1 pass, 2 sided scanning: B/W: 270 ppm , Colour: 270 ppm
[Fuji Xerox standard paper (A4 LEF), 200 dpi, to Folder]
*1 T
he minimum custom size is 84 x 139.7 mm.
*2 6
4 gsm paper.
*3 T
he scanning speed varies depending on the documents.
Description
Sort (Offset available) / Stack (Offset available)
Max: A3, 11 x 17"
Min: A5, Postcard (100 x 148 mm)
52 to 256 gsm
[Without Stapling]
A4LEF: 500 sheets, B4: 250 sheets, A3 or larger: 200 sheets, Mixed Size Stacking*3 :
250 sheets
[With Stapling]
30 sets, or A4 LEF: 500 sheets, B4: 250 sheets, A3 or larger: 200 sheets, Mixed
Size Stacking*3: 250 sheets
A4: 50 sheets (90 gsm or less)
B4 or larger: 30 sheets (90 gsm or less)
Max: A3, 11 x 17"
Min: B5 LEF
Single stapling, Dual stapling
W 478 x D 461 x H 238 mm, 11 kg
Note: The unit cannot be installed on ApeosPort-VI C7771/C6671 or DocuCentre-VI C7771/C6671.
*1 Documents may not be printed correctly depending on usage conditions. (52 to 55 gsm)
*2 64 gsm paper.
*3 When larger size sheets are stacked on top of smaller size sheets.
Item
Type
Paper Size*1
Staple
Punch*7
Booklet
Finishing*6
Capacity
Paper Size
Position
Number of
Holes
Paper Size
Paper Weight
Capacity
Paper Size
Paper Weight
Dimensions*9/ Weight
Description
Sort (Offset available) / Stack (Offset available)
Max: A3, 11 x 17"
Min: B5 LEF
52 to 220 gsm
[Without Stapling]
A4: 2000 sheets, B4 or larger: 1000 sheets, Mixed Size Stacking*4 : 300 sheets
[With Stapling]
A4: 100 sets or 1000 sheets*5 , B4 or larger: 75 sets or 750 sheets
[With Booklet Finishing*6 ]
50 sets or 600 sheets
[With Fold*6 ]
500 sheets
50 sheets (90 gsm or less)
Max: A3, 11 x 17"
Min: B5 LEF
Single stapling, Dual stapling
2-hole / 4-hole punch or 2-hole / 3-hole punch (US Specifications)
A3, 11 x 17", B4, A4*8 , A4 LEF, Letter*8 , Letter LEF, B5 LEF
55 to 200 gsm
Saddle Staple: 15 sheets, Fold 5 sheets
Max: A3, 11 x 17"
Min: A4, Letter
Saddle Staple: 64 to 80 gsm, Fold 64 to 105 gsm
W 620 x D 552 x H 1010 mm, 28 kg
With Booklet Finisher: W 620 x D 597 x H 1080 mm, 38 kg
Note: The unit cannot be installed on ApeosPort-V C7771/C6671 or DocuCentre-V C7771/C6671.
*1 Paper in the sizes larger than A3 or 11 x 17" or smaller than B5 are delivered to the Centre Tray.
*2 Documents may not be printed correctly depending on usage conditions. (52 to 55 gsm)
*3 64 gsm paper.
*4 When larger size sheets are stacked on top of smaller size sheets.
*5 75 sets or 750 sheets with dual stapling.
*6 T
he Booklet Finishing function requires the optional Finisher-B1 Booklet unit. After a job with the Booklet Finishing
function specified has been output, the next job may not be delivered until the sheets are removed from the output
tray. Also, if larger size sheets are stacked on top of smaller size sheets after a job with the Booklet Finishing function
specified has been run, the next job may not be delivered until the sheets are removed from the output tray.
*7 T
he Punch function requires the optional Finisher-B1 Punch unit for 2-hole / 4-hole punch or Finisher-B1 Punch unit for
2-hole / 3-hole punch (US Specifications).
*8 3-hole punch is not applicable.
*9 Inner connector within the body is excluded.
14
Output Tray
Finishing Tray
Booklet Tray
Output Tray
Finishing Tray
*1 64 gsm paper.
Staple
Punch*7
Paper Weight*1
Paper
Finishing Tray
Capacity*2
Description
C5571
C4471
C3371
C3370
Max: A3, 11 x 17"; Min: A5*1
38 to 128 gsm (In Duplex: 50 to 128 gsm)
130 sheets
B/W: 55
B/W: 45
B/W: 35
B/W: 30
sheets/minute sheets/minute sheets/minute sheets/minute
Colour: 55
Colour: 45
Colour: 35
Colour: 30
sheets/minute sheets/minute sheets/minute sheets/minute
B/W: 80 sheets/minute, Colour: 80 sheets/minute
1 pass, 2 sided scanning: B/W: 154 ppm*4 , Colour: 154 ppm*4
[Fuji Xerox standard paper (A4 LEF), 200 dpi, to Folder]
Paper
Weight
*1 80 gsm paper.
Scan Function ( Optional )
Item
Booklet Tray
Description
100 sheets
W 324 x D 567 x H 228 mm
W 389 x D 610 x H 380 mm
29 kg
Finisher-A2 ( Optional )
Description
Colour Scanner
600 x 600 dpi, 400 x 400 dpi, 300 x 300 dpi, 200 x 200 dpi
Same as the Duplex Automatic Document Feeder
Ethernet 1000BASE-T / 100BASE-TX / 10BASE-T
Finishing Tray
Paper
Capacity*3
*1 T
he speed may be reduced due to the image quality adjustment.The printing speed may be reduced depending on
the document.
*2 Please refer to our official website for the latest supported OS.
Item
Type
Scan Resolution
Scan Speed*1
Interface Standard
Paper
Size
Output Tray
Finishing Tray
Booklet Tray
Output Tray
Booklet
Finishing
Booklet Tray
Capacity
Paper Size
Position
Number of
Holes
Paper Size
Paper Weight
Capacity
Paper Size
Paper Weight*10
Dimensions*11
Weight
C3 Finisher
C3 Finisher with Booklet Maker
Sort / Stack
Sort (Offset available) / Stack (Offset available)
―
Sort / Stack
Max: 12 x 19" (305 x 483 mm)
Min: Postcard (100 x 148 mm)
Max: 12 x 19" (305 x 483 mm)
Min: B5 LEF
―
Max: 12 x 18" (305 x 457 mm)
Min: B5
52 to 300 gsm*1
52 to 300 gsm*1
―
60 to 105 gsm*2
500 sheets (A4)
[Without Stapling]
[Without Stapling]
A4: 1500 sheets, B4 or larger: 1500
A4: 3000 sheets, B4 or larger: 1500
sheets, Mixed Size Stacking*4 : 300
sheets, Mixed Size Stacking*4 : 300
sheets
sheets
[With Stapling]
[With Stapling]
A4: 200 sets or 3000 sheets, B4 or
A4: 200 sets or 1500 sheets, B4 or
larger: 100 sets or 1500 sheets, Mixed larger: 100 sets or 1500 sheets, Mixed
*4
Size Stacking : 70 sets or 200 sheets Size Stacking*4 : 70 sets or 200 sheets
―
20 sets*5
50 sheets (90 gsm or less)*6
Max: A3, 11 x 17"
Min: B5 LEF
Single stapling, Dual stapling
2-hole / 4-hole punch or 2-hole / 3-hole punch (US Specifications)
A3, 11 x 17", B4, A4*8 , A4 LEF, Letter , Letter LEF, B5 LEF, 7.25 x 10.5" (184 x 267
mm), 8 x 10" (203 x 254 mm), 16K (194 x 267 mm), Cover A4 (223 x 297 mm), 9
x 11" (229 x 279 mm), 215 x 315 mm, 8.5 x 13" (216 x 330 mm), Legal, 11 x 15"
(279 x 381 mm), 8K (267 x 388 mm)
52 to 200 gsm
―
Saddle Staple: 16 sheets*9
Middle-Fold: 5 sheets
Single Fold: 1 sheet
―
Max: SRA3 (320 x 450 mm), 12 x 18"
(305 x 457 mm)
Min: B5
―
Saddle Staple: 60 to 105 gsm
Middle-Fold: 60 to 105 gsm
Single Fold: 60 to 105 gsm
W 730 x D 589 x H 1056 mm
W 790 x D 589 x H 1056 mm
When Folder Unit CD1 is installed:
When Folder Unit CD1 is installed:
W 965 x D 726 x H 1056 mm
W 1025 x D 726 x H 1056 mm
(With Folder Unit CD1)
49 kg
61 kg
When Folder Unit CD1 is installed:
When Folder Unit CD1 is installed:
118kg (With Folder Unit CD1)
101kg (With Folder Unit CD1)
Note: Transport Unit H3 is required.
*1 52 to 55 gsm output paper may not be aligned properly depending on the paper type.
*2 Cover sheets can be up to 256 gsm.
*3 64 gsm paper.
*4 When larger size sheets are stacked on top of smaller size sheets.
*5 When the output paper size is the same.
*6 U
p to 65 sheets can be stapled when the C3 Finisher Staple Unit 65 Sheets is installed. However, depending on the
paper type, incorrect stapling such as uneven edge alignment of sets may occur.
*7 Optional.
*8 3-hole punch is not applicable.
*9 S addle Staple capacity varies depending on how heavy the cover is. Booklet may not be tightly closed depending on
the size or type of the paper.
*10 C
overs can be up to 256 gsm for saddle staple during printing.Printed covers can be up to 169 gsm (Heavyweight) for
middle-fold or saddle staple during copying, while blank covers can be up to 256 gsm.
*11 Inner connector within the body is excluded.
Folder Unit CD1 ( Optional )
Item
Paper Size
Z Fold
Half Sheet Paper
Weight
Paper Size
Tri-fold
Paper Weight
Paper
Capacity*1
Power Supply*2
Maximum Power
Consumption
Dimensions
Weight
Description
A3, 11 x 17", B4
60 to 90 gsm
A4, Letter
60 to 90 gsm
40 sheets
AC220-240 V +/- 10 %, 0.6 A, 50/60 Hz common
144 W or less (AC220-240 V +/- 10%)
W 232 x D 726 x H 991 mm
53 kg
Note: Optional of C3 Finisher / C3 Finisher with Booklet maker.
*1 64 gsm paper.
*2 Power supply separate from the main unit is required.
Notes
1) If the storage media (such as hard disk drives) of the base unit fail, loss of received data, accumulated data,
registered setting data, etc. may occur. In no event shall Fuji Xerox be liable for any damages whatsoever arising
from loss of data.
2) Functional spare parts will be available for at least 7 years after the product is no longer manufactured.
3) The product specifications, appearance and other details in this brochure are subject to change without notice
for improvements.
15