HPE ProLiant DL380 Generation9 (Gen9) Carrier Grade Supplement

QuickSpecs
HPE ProLiant DL380 Generation9 (Gen9)
Carrier Grade Supplement
Overview
HPE ProLiant DL380 Generation9 (Gen9)
NEBS Level 3 and ETSI Certified
The HPE ProLiant DL380 Gen9 Server delivers the best performance and expandability in the HPE 2P rack portfolio. Reliability,
serviceability and near continuous availability, backed by a comprehensive warranty, make it ideal for any environment. Deploy
the data center standard.
Front View - 8SFF Chassis with Optional Universal Media Bay shown
1.
2.
3.
4.
5.
6.
7.
8.
9.
10.
11.
12.
13.
14.
15.
Quick removal access panel
Universal Media bay. 2 USB 2.0 and VGA standard (8SFF
bay optional)
Optional Optical drive. Requires Universal Media bay
Optional 2 SFF HDD, blank shown. Requires Universal
Media bay
Drive Bay 2. Blank shown, 8SFF optional
8 SFF Drive Cage Bay
Power On/Standby button and system power LED button
Health LED
NIC status
UID button
USB 3.0
Serial label pull tag
Bay 3
Bay 2
Bay 1
Page 1
QuickSpecs
HPE ProLiant DL380 Generation9 (Gen9)
Carrier Grade Supplement
Overview
Rear view
1.
2.
3.
4.
5.
6.
7.
8.
9.
10.
11.
12.
13.
14.
15.
16.
PCI Slots (Slots 1-3 top to bottom, riser shipped standard)
PCI Slots (Slots 4-6top to bottom, requires second riser
card, and second processor)
Optional serial port
Optional rear 2 SFF HDD (supported in 24 SFF front end)
Power supply Power connection
Power supply Power LED
HPE Flexible Slot Power Supply bay 2 (800w shown)
Power supply Power connection
Power supply Power LED
HPE Flexible Slot Power Supply bay 1 (800w shown)
NOTE: Optional Micro UPS option.
VGA connector
Embedded 4x1GbE Network Adapter
Dedicated iLO connector
USB 3.0 connectors (2)
Unit ID LED
Optional FlexibleLOM ports (Shown: 4x1GbE)
Page 2
QuickSpecs
HPE ProLiant DL380 Generation9 (Gen9)
Carrier Grade Supplement
Overview
Internal View
1.
2.
3.
4.
5.
6.
7.
8.
9.
10.
11.
12.
13.
Fan cage shown with 6 standard Hot-plug fans (High
Performance fans optional)
Optional HPE Smart Storage Battery
MicroSD card slot
NOTE: Optional Dual MicroSD.
Internal USB 3.0 connector (2)
Optional HPE Flexible Smart Array or Smart HBA (H240ar
shown)
(Under) Hot Plug redundant HPE Flexible Slot Power supplies
NOTE: Optional Micro UPS option.
Connection for second (optional) riser (Required second CPU)
Embedded 4x1Gbe NIC
Primary PCIe riser, standard (Optional double wide GPU riser)
Optional Flexible LOM slot
X4 SATA ports (1 and 2)
2 Processors, heatsink showing, with HPE Smart Socket Guide
DDR4 DIMM slots. Shown fully populated in 24 slots (12 per
processor)
Page 3
HPE ProLiant DL380 Generation9 (Gen9)
Carrier Grade Supplement
QuickSpecs
Standard Features
NOTE: For more information regarding Intel Xeon processors, please see the following http://www.intel.com/xeon.
Processor
Up to two of the
following depending
on model
CPU
Cores
L3 Cache
Power
QPI
DDR4 Hz
frequency
E5-2690v3
2.6GHz
12
30MB
135W
9.6GT/s
2133
E5-2680v3
2.5GHz
12
30MB
120W
9.6GT/s
2133
E5-2670v3
2.3GHz
12
30MB
120W
9.6GT/s
2133
E5-2667v3
3.2GHz
8
20MB
135W
9.6GT/s
2133
E5-2660v3
2.6GHz
10
25MB
105W
9.6GT/s
2133
E5-2650v3
2.3GHz
10
25MB
105W
9.6GT/s
2133
E5-2650Lv3
1.8GHz
12
30MB
65W
9.6GT/s
2133
E5-2643v3
3.4GHz
6
20MB
135W
9.6GT/s
2133
E5-2640v3
2.6GHz
8
20MB
90W
8.0GT/s
1866
E5-2630v3
2.4Ghz
8
20MB
85W
8.0GT/s
1866
E5-2630Lv3
1.8GHz
8
20MB
55W
8.0GT/s
1866
E5-2620v3
2.4GHz
6
15MB
85W
8.0GT/s
1866
E5-2609v3
1.9GHz
6
15MB
85W
6.4GT/s
1600
E5-2603v3
1.6GHz
6
15MB
85W
6.4GT/s
1600
E5-2698v4
2.2GHz
20
50MB
135W
9.6GT/s
2400
E5-2697v4
2.3GHz
18
45MB
145W
9.6GT/s
2400
E5-2695v4
2.1GHz
18
45MB
120W
9.6GT/s
2400
E5-2683v4
2.1GHz
16
40MB
120W
9.6GT/s
2400
E5-2620v4
2.1GHz
8
20MB
85W
8.0GT/s
2133
NOTE: All processors above 120W use a high efficiency Heatsink. Doublewide PCIe cards are only
supported with this Heatsink. For processors with a standard Heatsink that require double wide PCIe
cards, the Graphics Enablement kit option is also required (719082-B21).
Chipset
Intel® C610 Series Chipset
Intel® E5-2600v3 Processor Family
NOTE: For more information regarding Intel chipsets, please see the following
URL: http://www.intel.com/products/server/chipsets/.
On System
Management
Chipset
HPE iLO (Firmware HPE iLO4 2.0) 4GB NAND
NOTE: 1GB USB user space configurable via UEFI and accessible via iLO. Read and learn more in
the iLO QuickSpecs.
Model
Type:
Memory
One of the following HPE SmartMemory
depending on
DDR4 Registered (RDIMM) or Load
model
Reduced (LRDIMM)
DIMM Slots Available
24
Maximum Capacity (LRDIMM) 1.5TB
Maximum Capacity (RDIMM) 768GB
(12 DIMM slots per processor, 4 channels per
processor, 3 DIMMs per channel)
(24 x 64GB LRDIMM @2133MHz)
(24 x 32GB RDIMM @2133MHz)
Page 4
HPE ProLiant DL380 Generation9 (Gen9)
Carrier Grade Supplement
QuickSpecs
Standard Features
Memory Protection Advanced ECC
Advanced ECC uses single device data correction to detect and correct
single and all multibit error that occurs within a single DRAM chip.
Memory online spare mode detects a rank that is degrading and switches
operation to the spare rank.
Online spare
Expansion Slots
Primary Riser
(Standard)
Slot 2 PCIe Riser
(Optional 3-slot)
719073-B21
Expansion Technology
Slots #
1
PCIe 3.0
Bus
Width
x8
Connector
Bus
Width
Number
x16
7
Form Factor
Notes
Full-height, halfProc 1
length slot
2
PCIe 3.0
x8
x16
10
Full-height, halfProc 1
length slot
3
PCIe 3.0
x8
x8
13
Half Length/Full
Proc 1
Height
* Default bus assignment (in decimal). Inserting cards with PCI bridges may alter the actual bus
assignment number.
** Indicates the number of physical electrical lanes running to the connector.
NOTE: All slots support PCIe cards to 150W or more depending on card, but an additional Power Cord
Option is required (PN 669777-B21). See Option Section below for offering.
Expansion Technology Bus
Connector
Bus
Device
Form Factor
Notes
Slots #
Width
Width
Number Number
4
PCIe 3.0
x16
x16
16
Full-height, fullProc 2
length slot
5
PCIe 3.0
x16
x16
20
Full-height, fullProc 2
length slot
6
PCIe 3.0
x8
x8
23
Full-height, halfProc 2
length slot
* Default bus assignment (in decimal). Inserting cards with PCI bridges may alter the actual bus
assignment number.
** Indicates the number of physical electrical lanes running to the connector.
NOTE: When populating the second optional riser slot, the second processor must be installed.
NOTE: All slots support PCIe cards to 150W or more depending on card but an additional Power Cord
Option is required (PN 669777-B21). See Option Section below for offering.
Storage Controller Entry Models
HPE Dynamic Smart Array B140i Controller
One of the following NOTE: The embedded B140i controller will operate in UEFI only mode. For legacy support
depending on
an additional controller will be needed, and for CTO orders please also select the Legacy
model
mode settings part, 758959-B22.
NOTE: The B140i defaults to AHCI off the chipset. Smart array needs to be enables on the
SATA only models if required.
NOTE: The B140i will not operate in Legacy mode.
Base Models
HPE Dynamic Smart Array B140i Controller
HPE Flexible Smart Array P440ar/2G FIO Controller
HPE Flexible Smart Array P840/4G FIO Controller
Performance Models HPE Dynamic Smart Array B140i Controller
HPE Flexible Smart Array P440ar/2GB
Internal Storage
Devices
Optical Drive
Ships standard in Performance Models
Optional: DVD-ROM, DVD-RW
Page 5
HPE ProLiant DL380 Generation9 (Gen9)
Carrier Grade Supplement
QuickSpecs
Standard Features
One of the following Hard Drives
depending on
Hard Drive Bays
model
Power Supply
None ship standard
8 SFF with optional Universal Media bay or 8SFF bay options
HPE 800W Flex Slot Platinum Hot Plug Power Supply
HPE 800W Flex Slot -48VDC Hot Plug Power Supply
All pre-configured servers ship with a standard 6-foot IEC C-13/C-14 jumper cord (A0K02A). This
jumper cord is also included with each standard AC power supply option kit. If a different power cord is
required, please check the ProLiant Power Cables web page.
To review the power requirements for your selected system, please use the HPE Power Advisor Tool
located at http://www.hpe.com/info/hppoweradvisor.
Power specifications and technical content for all HPE Server power supplies can be found
at http://www.hp.com/go/proliant/powersupply.
System Fans
Non-redundant
One of the following 2P model
depending on
NOTE: High Performance Fan Kit is required for NEBS Compliance.
model
Interfaces
Serial
Video
Redundant
6 fans
Optional
2 (1 front, optional via Universal Media Bay, 724865-B21), 1
back not active simultaneously
4 x 1Gb ports shipping standard with optional FlexibleLOM
1 Gb Dedicated
FlexibleLOM Network Ports
HPE iLO Remote Management
Network Port
Micro SD Slot
1 Micro SD
NOTE: The Micro SD slot is not a hot-pluggable device. Customers should not attempt to plug an
SD card into the SD slot while the server is powered.
USB 3.0
Up to 5 total: 1 front, 2 rear, 2 internal (secure), 2 optional USB
2.0 front via Universal Media Bay
SID (Systems Insight Display)
Optional
NOTE: Not shipping as standard. Available as a CTO option or as a field upgrade (768900-B21).
Operating Systems
and Virtualization
Software Support
for ProLiant
Servers
Microsoft Windows Server
Canonical Ubuntu
Red Hat Enterprise Linux (RHEL)
SUSE Linux Enterprise Server (SLES)
Oracle Solaris
VMware
Citrix XenServer
NOTE: For more information on HPE's Certified and Supported ProLiant Servers for OS and
Virtualization Software and latest listing of software drivers available for your server, please visit
our Support Matrix at: http://www.hp.com/go/ossupport and our driver download
page: http://www.hp.com/support/DL380Gen9.
Upgradeability
Upgradeable to two processors (36 Cores)
NOTE: Processor upgrade available from Intel® Xeon® Processors E5-2600v3. Please contact HPE
Technology Sales (http://www.hp.com/support), your local Hewlett Packard Enterprise Re-seller.
Page 6
HPE ProLiant DL380 Generation9 (Gen9)
Carrier Grade Supplement
QuickSpecs
Standard Features
Up to 24 DIMM slots available for higher Memory capacity
FlexibleLOM connector for 1 Gigabit or 10 Gigabit networking options
HPE Flexible Smart Array or Smart HBA Controllers
Embedded 10-Port SATA, B140i as standard
Optional 3 slot riser (x16, x16, x8), or 2 slot primary riser (x16, x8)
NOTE: To take advantage of the additional 3 PCI slot upgrade, the second processor must be installed.
Redundant Power Supply
Optical Drive supported via Universal Media Bay
NOTE: The Universal Media bay provides front VGA and 2xUSB 2.0, plus ability to add 2SFF and
Optical.
NOTE: Universal Media bay is only available with 8 or 8+8SFF chassis & can be populated in Bay1 only.
HPE Legacy Mode (FIO only, 758959-B22)
NOTE: UEFI is the default mode for CTO and BTO SKUs. Can change default to legacy via CTO.
Industry Standard ACPI 2.0b Compliant
Compliance
PCIe 3.0 Compliant
PXE Support
WOL Support
Microsoft® Logo certifications
USB 3.0 Support
USB 2.0 Support
NOTE: This support is on the optional Universal Media Bay.
Energy Star
ASHRAE A3/A4
NOTE: The DL380 Gen9 is now one of the first HPE ProLiant Gen9 Servers with Extended
Ambient Support up to 45 C for data center infrastructures designed for better energy efficiency
such as but not limited to fresh air cooling.
For additional technical thermal details regarding ambient temperatures, humidity and features
support please visit: http://www.hpe.com/servers/ashrae.
UEFI (Unified Extensible Firmware Interface Forum)
NOTE: UEFI is the default for the DL380 Gen9. Legacy model can be selected in the field or as a
CTO option (758959-B22).
Graphics
Integrated Matrox G200eH2 video standard with 16MB of Video RAM
• 1280 x 1024 (32 bpp)
• 1920 x 1200 (16 bpp)
HPE iLO 4 On System Management Memory
• 16 MB Flash
• 256 MB DDR3 with ECC (112 MB after ECC and video)
HPE Server
HPE Server UEFI /Legacy ROM
UEFI/Legacy ROM Unified Extensible Firmware Interface (UEFI) is an industry standard that provides better manageability
and more secured configuration while interacting with your server at boot time. HPE ProLiant Gen9
platform defaults to UEFI and can be factory or field configured for Legacy BIOS Boot Mode.
NOTE: The UEFI System Utilities function is analogous to the HPE ROM-Based Setup Utility (RBSU)
of legacy BIOS. For more information, please visit http://www.hp.com/go/proliantuefi/docs.
UEFI enables numerous new capabilities specific to HPE ProLiant servers such as:
• Secure Boot
Page 7
HPE ProLiant DL380 Generation9 (Gen9)
Carrier Grade Supplement
QuickSpecs
Standard Features
•
Operating system specific functionality
•
Support for > 2.2 TB (using GPT) boot drives
•
USB 3.0 Stack
•
Embedded UEFI Shell
•
Mass Configuration Deployment Tool using HPE RESTful API.
•
PXE boot support for IPv6 networks
•
Boot support for option cards that only support a UEFI option ROM
For more information please visit http://www.hp.com/go/proliant/uefi.
NOTE: For UEFI Boot Mode, boot environment and OS image installations should be configured
properly to support UEFI.
NOTE: HPE Legacy FIO Mode Setting (758959-B22) can be selected to configure the system in
Legacy mode in the factory.
Form Factor
One of the following
depending on
model
2U Rack form factor
8 SFF Version:
3.44 x 17.54 x 26.75 in (8.73 x 44.55 x 67.94 cm)
NOTE: Dimensions without bezel.
Embedded
Management
HPE Integrated
Lights-Out (HPE
iLO)
UEFI
Monitor your servers for ongoing management, service alerting, reporting and
remote management with iLO. Learn more at http://www.hp.com/go/ilo.
HPE RESTful API
RESTful API is an application programming interface. RESTful Web Service API
served by iLO’s web server. Learn more at http://www.hp.com/go/restfulapi.
Intelligent
Provisioning
Provision servers by discovering and deploying 1 to few servers with Intelligent
Provisioning. Learn more at http://www.hp.com/go/intelligentprovisioning.
Configure and boot your servers securely with industry standard Unified Extensible
Firmware Interface (UEFI). Learn more at http://www.hp.com/go/ProLiant/uefi.
Embedded Remote HPE’s embedded remote support, used with Insight Online direct connect or HPE
Insight Remote Support, allows HPE ProLiant servers to transmit hardware events
Support
directly to HPE or a Hewlett Packard Enterprise Authorized Partner for automated
phone home support. Learn more at http://www.hp.com/go/insightonline/info.
Server utilities
HPE Smart Update Optimize firmware and driver updates with HPE Smart Update solutions. Learn
more at http://www.hp.com/go/smartupdate.
HPE Systems
Insight Manager
(HPE SIM)
HPE SIM allows you to monitor the health of your HPE ProLiant Servers and HPE
Integrity Servers, and also provides you with basic support for non-Hewlett
Packard Enterprise servers.
HPE SIM also integrates with HPE SUM to provide quick and seamless firmware
updates. Learn more at http://www.hp.com/go/sim.
Scripting Tool Kit Provision 1 to many servers using your own scripts to discover and deploy them
with HPE Scripting Tool Kit for Windows and Linux or HPE Scripting Tools for
and Windows
Windows PowerShell. Learn more at http://www.hp.com/go/ProLiantSTK
PowerShell
Page 8
HPE ProLiant DL380 Generation9 (Gen9)
Carrier Grade Supplement
QuickSpecs
Standard Features
or http://www.hp.com/go/powershell.
HPE RESTful
Interface Tool
HPE RESTful Interface tool is a scripting tool to provision servers using RESTful
API Interface to discover and deploy servers at scale. Learn more
at http://www.hp.com/go/restfulapi.
HPE iLO Mobile
Application
Enables the ability to access, deploy, and manage your server anytime from
anywhere from select smartphones and mobile devices. For additional information
please visit: http://www.hp.com/go/ilo/mobileapp.
HPE Insight Online HPE Insight Online, available at no additional cost as part of your HPE warranty,
Care Pack or contractual support agreement with HPE, is a personalized
dashboard for simplified tracking of IT operations and support information from
anywhere, anytime. Learn more at http://www.hp.com/go/insightonline/info.
Security
Power-on password
Serial interface control
Administrator's password
UEFI
iLO 4 (Integrated Lights-Out 4) has 12 customizable user accounts and SSL encryption
Integrated Lights-Out can be disabled via a Global Setting
iLO Advanced supports directory services integration
TPM 1.2
Warranty
This product is covered by a global limited warranty and supported by HPE Services and a worldwide
network of Hewlett Packard Enterprise Authorized Channel Partners resellers. Hardware diagnostic
support and repair is available for three years from date of purchase. Support for software and initial setup
is available for 90 days from date of purchase. Enhancements to warranty services are available through
HPE Pointnext operational services or customized service agreements. Hard drives have either a one year
or three year warranty; refer to the specific hard drive QuickSpecs for details.
NOTE: Server Warranty includes 3-Year Parts, 3-Year Labor, 3-Year Onsite support with next business
day response. Warranty repairs may be accomplished through the use of Customer Self Repair (CSR)
parts. These parts fall into two categories: 1) Mandatory CSR parts are designed for easy replacement.
A travel and labor charge will result when customers decline to replace a Mandatory CSR part; 2)
Optional CSR parts are also designed for easy replacement but may involve added complexity.
Customers may choose to have HPE replace Optional CSR parts at no charge. Additional information
regarding worldwide limited warranty and technical support is available at:
http://h18004.www1.hp.com/products/servers/platforms/warranty/index.html.
Page 9
HPE ProLiant DL380 Generation9 (Gen9)
Carrier Grade Supplement
QuickSpecs
Optional Features
Embedded
Management
iLO Advanced
Server
Management
HPE Insight Control HPE Insight Control, lets you deploy, migrate, monitor, remote control, and
optimize your IT infrastructure through a single, simple management console.
For more information, see http://www.hp.com/go/insightcontrol.
HPE OneView
Advanced
HPE iLO Advanced licenses offer smart remote functionality without
compromise, for all HPE ProLiant servers. The license includes the full integrated
remote console, virtual keyboard, video, and mouse (KVM), multi-user
collaboration, console record and replay, and GUI-based and scripted virtual
media and virtual folders. You can also activate the enhanced security and power
management functionality. Learn more about HPE iLO Advanced
at http://www.hp.com/go/iloadvanced
HPE OneView Advanced is converged management that eliminates
infrastructure complexity with automation simplicity. This modern architecture is
designed to accelerate your IT operations across servers, storage, and network
resources using software-defined approaches and automation,
see http://www.hp.com/go/oneview.
HPE Insight Cluster HPE Insight Cluster Management Utility is a hyperscale-optimized management
Management Utility framework that includes software for the provisioning, control, performance
(CMU)
management and monitoring of groups of nodes and infrastructure. Learn more
at http://www.hp.com/go/cmu.
Rack and Power
Infrastructure
HPE Rack and Power Infrastructure products and services create highly efficient and intelligent solutions
for existing or new IT data centers. HPE Rack and Power infrastructure solutions – rack infrastructure,
power protection and management, performance optimized data centers (PODs) – are the foundation
you are looking for to help secure your long-term IT success. These products are designed to help you
react to changes in the industry. They deliver efficient, easy-to-use capabilities to manage, monitor,
deploy and provision infrastructure from entry to enterprise. As an industry leader, Hewlett Packard
Enterprise is uniquely positioned to address the key concerns of power, cooling, cable management and
system access.
Learn more at HPE Rack and Power Infrastructure.
High Performance HPE Cluster Platforms are specifically engineered, factory-integrated large-scale ProLiant clusters
Clusters
optimized for High Performance Computing, with a choice of servers, networks and software. Operating
system options include specially priced offerings for Red Hat Enterprise Linux and SUSE Linux
Enterprise Server, as well as Microsoft Windows HPC Server. A Cluster Platform Configurator simplifies
ordering. http://www.hp.com/go/clusters.
NOTE: High Performance Computing (HPC) interconnect technologies are available for this server as
part of the HPE Cluster Platform portfolio. These high-speed InfiniBand and Gigabit interconnects are
fully supported by HPE when integrated within an HPE cluster. Flexible, validated solutions can be
defined with the help of configuration
tools. http://www.hp.com/techservers/clusters/ucp/index.html.
HPC Interconnects NOTE: High Performance Computing (HPC) interconnect technologies are available for this server
under the HPE Cluster Platform product portfolio. These high-speed interconnects are fully supported
by HPE when they are part of these configure to order clusters. Solutions can be defined with a lot of
flexibility with the help of configuration tools. Please visit the following URL to configure HPC Clusters
with InfiniBand Interconnects: http://www.hp.com/techservers/clusters/ucp/index.html.
Page 10
HPE ProLiant DL380 Generation9 (Gen9)
Carrier Grade Supplement
QuickSpecs
Optional Features
Storage Software Whether you need to solve a specific data protection, archiving, or storage command and control
challenge, or deliver on strategic consolidation, compliance, or continuity initiatives, look no further
than HPE storage software. Our storage software helps you reduce costs, simplify storage
infrastructure, protect vital assets and respond faster to business opportunities.
Storage software that gets the job done:
•
•
•
•
•
•
Data Protection and Recovery Software
Whether you're a large enterprise or a smaller business, HPE data protection and recovery
software will cost-effectively protect you against disaster and ensure business continuity.
Data Archive and Migration Software
HPE's storage software enables you to comply with data retention and retrieval requirements,
improve application performance, and reduce costs by efficiently migrating infrequently
accessed or less valuable data to lower cost storage.
Storage Resource Management Software (SRM)
HPE's storage resource management software reduces operational costs and provides the
command and control foundation you need to efficiently manage and visualize your physical
and virtual environments.
Data Replication Software
Hewlett Packard Enterprise offers array-based and host-based replication software for use in
disaster recovery, testing, application development and reporting.
Storage Device Management Software
Maximize your investment in HPE storage and networking with software that enables
hardware-specific configuration, performance tuning and connectivity management.
HPE StoreVirtual VSA
With HPE StoreVirtual VSA you can use the power of virtualization to create a virtual array
within your host server. Manage it as a single pool of shared storage capacity, and scale it to
match your evolving needs. HPE ProLiant Gen9 servers include a 3-year limited license for
HPE StoreVirtual VSA software with 1TB of capacity at no extra cost. Simply select to install
HPE StoreVirtual VSA software during server setup within Intelligent Provisioning. More
information, instructional videos, and free console management software are available
at http://www.hp.com/go/vsa1TB.
NOTE: For more information about Storage Software including QuickSpecs, please
see: http://www.hp.com/go/storage/software.
One Config Simple SCE is a guided self-service tool to help sales and non-technical people provide customers with initial
configurations in 3 to 5 minutes. You may then send the configuration on for configuration help, or use in
(SCE)
your existing ordering processes. If you require "custom" rack configuration or configuration for products
not available in SCE, please contact HPE's Customer Business Center or an Authorized Partner for
assistance. http://www.hp.com/products/configurator.
Page 11
HPE ProLiant DL380 Generation9 (Gen9)
Carrier Grade Supplement
QuickSpecs
Service and Support
HPE Technology
Services
HPE Technology Services delivers confidence, reduces risk and helps customers realize agility and stability.
Connect to HPE to help prevent problems and solve issues faster. Our support technology lets you to tap
into the knowledge of millions of devices and thousands of experts to stay informed and in control,
anywhere, any time.
HPE Pointnext operational services enable you to order the right service level, length of coverage and
Protect your
business beyond response time as you purchase your new server, giving you full entitlement for the term you select.
warranty with HPE
Pointnext
operational
services
Optimized Support HPE Proactive Care - Call to Repair commitment, 24x7 coverage, three year Care Pack Service
recommendation Prevent problems and stabilize IT by utilizing secure, real-time, predictive analytics and proactive
consultations when your products are connected to HPE. Includes enhanced escalation management and
the industry’s highest level of hardware support commitment – hardware will be returned to operating
conditions within six (6) hours after you open your case. Comes with collaborative software call
management with two hour call back to reduce troubleshooting.
As a leading global support provider for Microsoft, Red Hat, VMware, SUSE and other operating systems,
Hewlett Packard Enterprise is able to simplify and shorten your time to resolution with one call for hardware
or software questions. https://www.hpe.com/h20195/v2/GetPDF.aspx/4AA3-8855ENW.pdf.
HPE ProLiant Server Hardware Installation
Help ensure your new HPE ProLiant hardware is installed smoothly, efficiently and with minimal disruption
to your IT and business operations. https://www.hpe.com/h20195/V2/GetPDF.aspx/5981-9356EN.pdf.
Standard Support HPE Proactive Care - 24x7 coverage, three year Care Pack Service
recommendation This service helps prevent problems and stabilize IT by utilizing secure, real-time, predictive analytics and
proactive consultations when your products are connected to HPE. Includes four hour response for
hardware, and collaborative call management for software with a two hour callback.
https://www.hpe.com/h20195/v2/GetPDF.aspx/4AA3-8855ENW.pdf.
HPE ProLiant Hardware Installation
Help ensure your new HPE ProLiant hardware is installed smoothly, efficiently and with minimal disruption
to your IT and business operations. https://www.hpe.com/h20195/V2/GetPDF.aspx/5981-9356EN.pdf.
Related Services
Data Center Platform Consulting Services
These services help modernize key systems and leverage new technology to support a changing business
climate and prepare you for the new style of IT. Hewlett Packard Enterprise understands the needs of the
data center of the future and will serve as your guide for the journey.
http://www.hp.com/services/consulting
Data Privacy Services
Protect your data through better media management. HPE Data privacy services help manage and protect
sensitive data. http://www.hp.com/services/dataprivacy
Factory Express for Servers and storage
HPE Factory Express offers configuration, customization, integration and deployment services for Hewlett
Page 12
HPE ProLiant DL380 Generation9 (Gen9)
Carrier Grade Supplement
QuickSpecs
Service and Support
Packard Enterprise servers and storage products. Choose how your factory solutions are built, tested,
integrated, shipped and deployed. http://www.hp.com/go/factory-express.
HPE Foundation Care
Hardware and software support services provide easy connection to HPE to resolve support issues
quickly. Includes collaborative call management for industry leading software; full software support may also
be purchased, giving you one place to call for help. http://www.hp.com/services/foundationcare.
Additional HPE Pointnext operational services can be found at: http://www.hp.com/go/cpc.
Parts and Materials Hewlett Packard Enterprise will provide HPE-supported replacement parts and materials necessary to
maintain the covered hardware product in operating condition, including parts and materials for available
and recommended engineering improvements.
Parts and components that have reached their maximum supported lifetime and/or the maximum usage
limitations as set forth in the manufacturer's operating manual, product quick-specs, or the technical product
data sheet will not be provided, repaired, or replaced as part of these services.
The defective media retention service feature option applies only to Disk or eligible SSD/Flash Drives
replaced by Hewlett Packard Enterprise due to malfunction.
Page 13
HPE ProLiant DL380 Generation9 (Gen9)
Carrier Grade Supplement
QuickSpecs
Configuration Information - Factory Integrated Models
This section lists some of the steps required to configure a Factory Integrated Model. To ensure only valid configurations are
ordered, Hewlett Packard Enterprise recommends the use of a Hewlett Packard Enterprise approved configurator. Contact your
local sales representative for information on configurable product offerings and requirements.
1. Factory Integrated Models must start with a CTO Server.
2. FIO indicates that this option is only available as a factory installable option.
3. All Factory Integrated Models will be populated with sufficient hard drive blanks based on the number of initial hard drives
ordered with the server.
4. Some options may not be integrated at the factory. Contact your local sales representative for additional information.
IMPORTANT: To yield a carrier grade server that is compliant with all the required technical criteria, the product content is limited
to what is listed in this document. In addition to this, system maintenance switch #10 must be turned on to enable the expanded
operating temperature range and the hardware from the following kits must be installed:
HPE DL380 Gen9 High Performance Fan Kit
HPE DL380 Gen9 Primary NEBS Conversion Cage Kit
HPE DL380 Gen9 Secondary NEBS Conversion Cage Kit (if secondary PCIe riser required)
Please refer to the HPE DL380 Gen9 Carrier Grade Conversion documentation on the Hewlett Packard Enterprise web
site: http://www.hp.com/go/hpsc
Step 1: Base Configuration (choose one of the following configurable models)
[Chassis]
SKU Number
Processor
DIMM Slots
Storage Controller
PCIe
Drive Cage
Network
Controller
Fans
Management
USB
Ears
HPE ProLiant DL380 Gen9 8SFF Configure-to-order Server
719064-B21
2 (optional) x HPE Smart Socket Guide
24 DIMM slots for RDIMM, LRDIMM DDR4 Memory
HPE Dynamic Smart Array B140i, plus optional HPE Flexible Smart Array or Smart HBA
controller
3 PCIe slots (+3 PCI slots available with upgrade option, second processor required)
8SFF Hot Plug
HPE Embedded 1Gb Ethernet 4-port 331i Adapter, plus optional HPE Flexible LOM or stand up
card
4 hot plug fans, redundant
iLO Management (standard), Intelligent Provisioning (standard), iLO Advanced (optional),
Insight Control (optional), HPE OneView (optional)
1 front, 2 internal, 2 rear
HPE Quick Release Ears
Step 2: Choose Required Options (only one of the following from each list unless otherwise noted)
HPE Processors
Select one or two processors from Core options-Processor section below.
•
•
•
If one processor is desired, select one xxxxxx-L21
If two processors are desired, select one xxxxxx-L21 and one xxxxxx-B21.
Up to 2 processors supported. Mixing different processor models is not supported.
Page 14
HPE ProLiant DL380 Generation9 (Gen9)
Carrier Grade Supplement
QuickSpecs
Configuration Information - Factory Integrated Models
•
DDR4 speed is the maximum memory speed of the processor. Actual memory speed may depend
on the quantity and type of DIMMs installed.
For the Intel® C600 Chipset E5-2600 Series, the letter preceding the model number indicates the Product
Line (E3, E5, E7); 2600x v#, 2 = number of CPUs in a Node, 6 is socket/segment designation, 00 =
Processor SKU, x = L for low power SKUs and v# (not yet designated) = version number.
HPE Memory
Select one or more memory from Core options-Memory section below.
•
•
•
•
•
HPE Power
Supplies
LRDIMM, RDIMM are all distinct memory technologies and cannot be mixed within a server. The
majority of ProLiant Gen9 servers support LRDIMM and RDIMM.
HPE memory from previous generation servers are not qualified or warranted with this HPE
ProLiant Server. HPE SmartMemory is required to realize the memory performance
improvements and enhanced functionality listed in this document for Gen9.
If only one processor is installed, only half of the total DIMM slots are available. When populating
with two processors all DIMM slots are available.
Kits described as LP include Low Power DIMMs. For more information on ProLiant Energy
Efficient Features, see: http://www.hp.com/go/proliant-energy-efficient.
Depending on the memory configuration and processor model, the memory speed may run at
2133MHz, 1866MHz, 1600MHz or 1333MHz. Please see Memory Population Table or the
Online Memory Configuration Tool at: http://www.hp.com/go/ddr4config.
Select one or more power supplies from Core Options-Power Supplies section below.
•
•
Prior to selecting a power supply option, it is highly recommended that you review your server
configuration in the HPE Power Advisor tool to determine the right size power supply for your
server configuration. The HPE Power Advisor is located
at: http://www.hpe.com/info/hppoweradvisor.
Mixing of power supplies in the same server is not supported. All power supplies must be of the
same input voltage, output rating, and efficiency rating. If non-matching power supplies are
installed, you may receive an error message and/or experience operational issues with your
server.
Step 3: Choose Additional Factory Integratable Options
HPE Unique
Options
Select one or more Unique options from Core options section below.
•
•
This section may contain FIO options, please see the Unique options section below.
FIO indicates that this option is only available as a factory installable option.
HPE I/O Expansion Select one or more Riser Kit options from Core options section below.
Options
• To take advantage of the additional PCI slot upgrade, the second processor must be installed.
• This section may contain FIO options, please see HPE I/O Expansion Options section below.
• FIO indicates that this option is only available as a factory installable option.
HPE Drives
Select one or more drives from Core options-HPE Drives section below.
•
The components of a storage subsystem (e.g. the drive, the HBA/controller, firmware, and the
server backplane) should operate at the same data transfer rate or the system bandwidth will be
negotiated down to an acceptable level for all components.
Page 15
HPE ProLiant DL380 Generation9 (Gen9)
Carrier Grade Supplement
QuickSpecs
Configuration Information - Factory Integrated Models
•
•
Hard drives have either a one year or three year warranty; refer to the specific hard drive
QuickSpecs for details.
The HPE ProLiant Gen9 Smart Storage solutions are equipped with re-designed Small Form
Factor (SFF 2.5 in) and Large Form Factor (LFF 3.5 in) hot plug carriers for HPE Qualified Hard
Drives and Solid State Drives. These new carriers provide status and activity indicators as well as
caution indicators for "Do Not Remove".
HPE Flexible LOM Select a FlexibleLOM from Core options-Networking section below.
•
•
•
HPE Networking
Select a standup NIC adapter from Core options-Networking section below.
•
•
•
HPE Storage
Controllers
•
•
•
Please see the HPE Power Advisor for estimated power consumption of your individual system
configuration prior to installing GPUs. The HPE Power Advisor is located
at: http://www.hpe.com/info/hppoweradvisor.
This section may contain FIO options, please see HPE Computation & Graphics Accelerators
section below.
Select one or more Fan Kits from Core options section below.
•
•
HPE Rail Kits
The embedded B140i controller will operate in UEFI only mode. For legacy support an additional
controller will be needed, and for CTO orders please also select the Legacy mode settings part,
758959-B22
This section may contain FIO options, please see HPE Storage Controllers section below.
FIO indicates that this option is only available as a factory installable option.
Select one or more graphics adapter from Additional options section below.
•
HPE Cooling
Options
Please see the QuickSpecs for Technical Specifications and additional
information: http://www.hp.com/go/ProLiantNICs.
These options are upgradeable and can be changed from the original configuration after the
server is shipped.
For 10Gb adapters, a minimum of two Gigabytes (2 GB) of server memory is required per each
adapter.
Select one or more Storage options from Additional options section below.
•
HPE Graphics
Options
Only one FlexibleLOM can be added to the server. These options are upgradeable and can be
changed from the original configuration after the server is shipped.
For 10Gb adapters, a minimum of two Gigabytes (2 GB) of server memory is required per each
adapter.
Please see the QuickSpecs for Technical Specifications and additional
information: http://www.hp.com/go/ProLiantNICs.
This section may contain FIO options, please see HPE Cooling Options section below.
FIO indicates that this option is only available as a factory installable option.
Select one type of rail kit from Additional options section below.
•
Please take a moment to review the installation documentation that comes with the server to help
you with the installation of your Gen9 server.
Page 16
HPE ProLiant DL380 Generation9 (Gen9)
Carrier Grade Supplement
QuickSpecs
Configuration Information - Factory Integrated Models
•
•
To assist in the installation of the server into the rack, an optional installation tool is available by
contacting your local services representative (p/n 695539-001).
See HPE Rack Options in Additional Options section of this QuickSpecs for more rack kit choices.
CAUTION: Hewlett Packard Enterprise recommends that a minimum of two people are required for all
Rack Server installations. Please refer to your installation instructions for proper tools and number of
people to use for any installation.
Page 17
QuickSpecs
HPE ProLiant DL380 Generation9 (Gen9)
Carrier Grade Supplement
Core Options
NOTE: Some options may not be integrated at the factory. To ensure only valid configurations are ordered, Hewlett Packard
Enterprise recommends the use of a Hewlett Packard Enterprise approved configurator. Contact your local sales
representative for additional information.
HPE Unique
HPE DL380 Gen9 High Performance Fan Kit
719079-B21
Options
NOTE: Required for NEBS compliance.
NOTE: This kit is required for specific Ambient temperature environments,
more details here: http://www.hpe.com/servers/ashrae.
NOTE: This kit is also required to support Passive GPUs.
HPE DL380 Gen9 Primary NEBS Conversion kit
719070-B21
NOTE: Required for NEBS compliance.
Slot1: 2xGen3 x16 FH/FL, 1xGen3 x8 FH/HL
NOTE: Kit replaces the standard Primary riser in slot1 and adds NEBS certified
system air baffle.
HPE DL380 Gen9 Secondary NEBS Conversion Cage Kit
783286-B21
NOTE: NEBS Certified Secondary PCIe Riser.
Slot2: 2xGen3 x16 FH/FL, 1xGen3 x8 FH/HL
NOTE: It is no longer necessary to purchase the commercial riser option and the
NEBS conversion kit. The Gen9 NEBS conversion cage ships as a complete
product with both the cage and PCIe riser installed.
HPE DL380 Gen9 Universal Media Bay Kit
724865-B21
NOTE: The HPE DL380 Gen9 Universal Media bay provides front VGA and
2xUSB 2.0.
HPE DL380 Gen9 Systems Insight Display Kit
768900-B21
NOTE: The Systems Insight Display no longer ships as standard but is available
as a Factory Integrated or field upgrade option.
HPE DL380 Gen9 Rear Serial Port and Enablement Kit
768896-B21
HP DL380 Gen9 Graphics Enablement Kit
719082-B21
NOTE: This kit includes alternative 2 heatsinks plus6 cables to enable
GPU support. Other limitations apply, see Graphic section for more details.
NOTE: We support up to 2 Double wide and 3 single wide Graphics cards,
limitations apply.
NOTE: Double Wide GPUs will occupy slots 2 and 5 and will leave only 2 slots
left open.
NOTE: There are limitations on GPU support with the NVMe bay installed.
HP DL380 Gen9 Additional 8SFF Bay2 Cage/Backplane Kit
768857-B21
NOTE: To add an additional 8SFF drive cage in Bay 2. This is the optimal
solution to upgrade to 16SFF total and allows the flexibility to add the Universal
Media Bay (724865-B21) for 2 additional SFF or Optical.
HPE Processors Entry Processors - E5-2600v3 series Processors
HPE DL380 Gen9 Intel® Xeon® E5-2603v3 (1.6GHz/6-core/15MB/85W) FIO
Processor Kit
NOTE: FIO indicates factory integrated option via CTO.
HPE DL380 Gen9 Intel® Xeon® E5-2603v3 (1.6GHz/6-core/15MB/85W)
Processor Kit
HPE DL380 Gen9 Intel® Xeon® E5-2609v3 (1.9GHz/6-core/15MB/85W) FIO
Processor Kit
NOTE: FIO indicates factory integrated option via CTO.
719053-L21
719053-B21
719052-L21
Page 18
QuickSpecs
HPE ProLiant DL380 Generation9 (Gen9)
Carrier Grade Supplement
Core Options
HPE DL380 Gen9 Intel® Xeon® E5-2609v3 (1.9GHz/6-core/15MB/85W)
Processor Kit
Base Processors - E5-2600v3 series Processors
HPE DL380 Gen9 Intel® Xeon® E5-2620v3 (2.4GHz/6-core/15MB/85W) FIO
Processor Kit
NOTE: FIO indicates factory integrated option via CTO.
HPE DL380 Gen9 Intel® Xeon® E5-2620v3 (2.4GHz/6-core/15MB/85W)
Processor Kit
HPE DL380 Gen9 Intel® Xeon® E5-2630v3 (2.4GHz/8-core/20MB/85W) FIO
Processor Kit
NOTE: FIO indicates factory integrated option via CTO.
HPE DL380 Gen9 Intel® Xeon® E5-2630v3 (2.4GHz/8-core/20MB/85W)
Processor Kit
HPE DL380 Gen9 Intel® Xeon® E5-2630Lv3 (1.8GHz/8-core/20MB/55W) FIO
Processor Kit
NOTE: FIO indicates factory integrated option via CTO.
HPE DL380 Gen9 Intel® Xeon® E5-2630Lv3 (1.8GHz/8-core/20MB/55W)
Processor Kit
HPE DL380 Gen9 Intel® Xeon® E5-2640v3 (2.6GHz/8-core/20MB/90W) FIO
Processor Kit
NOTE: FIO indicates factory integrated option via CTO.
HPE DL380 Gen9 Intel® Xeon® E5-2640v3 (2.6GHz/8-core/20MB/90W)
Processor Kit
Performance Processors - E5-2600v3 series Processors
HPE DL380 Gen9 Intel® Xeon® E5-2698v3 (2.3GHz/16-core/40MB/135W) FIO
Processor Kit
NOTE: FIO indicates factory integrated option via CTO.
HPE DL380 Gen9 Intel® Xeon® E5-2650v3 (2.3GHz/10-core/25MB/105W)
Processor Kit
HPE DL380 Gen9 Intel® Xeon® E5-2650Lv3 (1.8GHz/12-core/30MB/65W) FIO
Processor Kit
NOTE: FIO indicates factory integrated option via CTO.
HPE DL380 Gen9 Intel® Xeon® E5-2650Lv3 (1.8GHz/12-core/30MB/65W)
Processor Kit
HPE DL380 Gen9 Intel® Xeon® E5-2660v3 (2.6GHz/10-core/25MB/105W) FIO
Processor Kit
NOTE: FIO indicates factory integrated option via CTO.
HPE DL380 Gen9 Intel® Xeon® E5-2660v3 (2.6GHz/10-core/25MB/105W)
Processor Kit
HPE DL380 Gen9 Intel® Xeon® E5-2670v3 (2.3GHz/12-core/30MB/120W) FIO
Processor Kit
NOTE: Ships with a High Performance Heatsink.
NOTE: FIO indicates factory integrated option via CTO.
HPE DL380 Gen9 Intel® Xeon® E5-2670v3 (2.3GHz/12-core/30MB/120W)
Processor Kit
NOTE: Ships with a High Performance Heatsink.
HPE DL380 Gen9 Intel® Xeon® E5-2680v3 (2.5GHz/12-core/30MB/120W) FIO
Processor Kit
NOTE: Ships with a High Performance Heatsink.
719052-B21
719051-L21
719051-B21
719050-L21
719050-B21
719060-L21
719060-B21
719049-L21
719049-B21
781913-B21
719048-B21
719059-L21
719059-B21
762764-L21
762764-B21
719046-L21
719046-B21
762766-L21
Page 19
QuickSpecs
HPE ProLiant DL380 Generation9 (Gen9)
Carrier Grade Supplement
Core Options
NOTE: FIO indicates factory integrated option via CTO.
HPE DL380 Gen9 Intel® Xeon® E5-2680v3 (2.5GHz/12-core/30MB/120W)
Processor Kit
NOTE: Ships with a High Performance Heatsink.
HPE DL380 Gen9 Intel® Xeon® E5-2690v3 (2.6GHz/12-core/30MB/135W) FIO
Processor Kit
NOTE: Ships with a High Performance Heatsink.
NOTE: FIO indicates factory integrated option via CTO.
HPE DL380 Gen9 Intel® Xeon® E5-2690v3 (2.6GHz/12-core/30MB/135W)
Processor Kit
NOTE: Ships with a High Performance Heatsink.
HPE Processors - E5-2600v4 series Processors
HPE DL380 Gen9 Intel® Xeon® E5-2698v4 (2.2GHz/20-core/50MB/135W) FIO
Processor Kit
NOTE: FIO indicates factory integrated option via CTO.
HPE DL380 Gen9 Intel® Xeon® E5-2698v4 (2.2GHz/20-core/50MB/135W)
Processor Kit
HPE DL380 Gen9 Intel® Xeon® E5-2697v4 (2.3GHz/18-core/45MB/145W) FIO
Processor Kit
NOTE: FIO indicates factory integrated option via CTO.
HPE DL380 Gen9 Intel® Xeon® E5-2697v4 (2.3GHz/18-core/45MB/145W)
Processor Kit
HPE DL380 Gen9 Intel® Xeon® E5-2695v4 (2.1GHz/18-core/45MB/120W) FIO
Processor
NOTE: FIO indicates factory integrated option via CTO.
HPE DL380 Gen9 Intel® Xeon® E5-2695v4 (2.1GHz/18-core/45MB/120W)
Processor
HPE DL380 Gen9 Intel® Xeon® E5-2683v4 (2.1GHz/16-core/40MB/120W) FIO
Processor
NOTE: FIO indicates factory integrated option via CTO.
HPE DL380 Gen9 Intel® Xeon® E5-2683v4 (2.1GHz/16-core/40MB/120W)
Processor
HPE DL380 Gen9 Intel® Xeon® E5-2620v4 (2.1GHz/8core/20MB/85W) FIO Processor Kit
NOTE: FIO indicates factory integrated option via CTO.
HPE DL380 Gen9 Intel® Xeon® E5-2620v4 (2.1GHz/8core/20MB/85W) Processor Kit
HPE Memory
Registered DIMMs (RDIMMs) for E5-2600v3 Series
NOTE: The following memory is supported by the E5-2600v3 series Processors.
HPE 8GB (1x8GB) Single Rank x4 DDR4-2133 CAS-15-15-15 Registered
Memory Kit
HPE 16GB (1x16GB) Dual Rank x4 DDR4-2133 CAS-15-15-15 Registered
Memory Kit
HPE 32GB (1x32GB) Dual Rank x4 DDR4-2133 CAS-15-15-15 Registered
Memory Kit
HPE 32GB (1x32GB) Quad Rank x4 DDR4-2133 CAS-15-15-15 Load Reduced
Memory Kit
Registered DIMMs (RDIMMs) for E5-2600v4 Series
762766-B21
719044-L21
719044-B21
817965-L21
817965-B21
817963-L21
817963-B21
817961-L21
817961-B21
817953-L21
817953-B21
817927-L21
817927-B21
726718-B21
726719-B21
726728-B21
726722-B21
Page 20
QuickSpecs
HPE ProLiant DL380 Generation9 (Gen9)
Carrier Grade Supplement
Core Options
NOTE: The following memory is supported by the E5-2600v4 series
Processors.
HP 32GB (1x32GB) Dual Rank x4 DDR4-2400 CAS-17-17-17 Registered
Memory
HPE 16GB (1x16GB) Dual Rank x4 DDR4-2400 CAS-17-17-17 Registered
Memory Kit
HP 16GB (1x16GB) Single Rank x4 DDR4-2400 CAS-17-17-17 Registered
Memory Kit
HP 8GB (1x8GB) Single Rank x8 DDR4-2400 CAS-17-17-17 Registered
Memory Kit
NOTE: Depending on Processor selected this memory will run at 1600, 1866 or
2133MHz.
HPE Optical Drives HPE 9.5mm SATA DVD-ROM JackBlack Gen9 Optical Drive
NOTE: The Universal Media Bay (724865-B21) is required for this option.
HPE 9.5mm SATA DVD-RW JackBlack G9 Optical Drive
NOTE: The Universal Media Bay (724865-B21) is required for this option.
HPE Drives
SAS Hot Plug SFF (2.5-inch) Enterprise (ENT) Drives
HPE 1.2TB 6G SAS 10K rpm SFF (2.5-inch) SC Dual Port Enterprise 3yr Warranty
Hard Drive
HPE 900GB 12G SAS 10K rpm SFF (2.5-inch) SC Enterprise 3yr Warranty Hard
Drive
HPE 900GB 6G SAS 10K rpm SFF (2.5-inch) SC Enterprise 3yr Warranty Hard
Drive
HPE 600GB 12G SAS 10K rpm SFF (2.5-inch) SC Enterprise 3yr Warranty Hard
Drive
HPE 600GB 12G SAS 15K rpm SFF (2.5-inch) SC Enterprise 3yr Warranty Hard
Drive
HPE 600GB 6G SAS 10K rpm SFF (2.5-inch) SC Enterprise 3yr Warranty Hard
Drive
HPE 450GB 12G SAS 15K rpm SFF (2.5-inch) SC Enterprise 3yr Warranty Hard
Drive
HPE 450GB 6G SAS 10K rpm SFF (2.5-inch) SC Enterprise 3yr Warranty Hard
Drive
HPE 300GB 12G SAS 10K rpm SFF (2.5-inch) SC Enterprise 3yr Warranty Hard
Drive
HPE 300GB 12G SAS 15K rpm SFF (2.5-inch) SC Enterprise 3yr Warranty Hard
Drive
HPE 300GB 6G SAS 10K rpm SFF (2.5-inch) SC Enterprise 3yr Warranty Hard
Drive
12G SAS Hot Plug SFF (2.5-inch) Enterprise Performance Solid State Drives
HPE 800GB 12G SAS High Endurance SFF 2.5-in SC Enterprise Performance 3yr
Wty Solid State Drive
HPE 400GB 12G SAS Mainstream Endurance SFF 2.5-in ENT Mainstream SC 3yr
Wty H2 Solid State Drive
HPE 800GB 12G SAS Mainstream Endurance SFF 2.5-in ENT Mainstream SC 3yr
Wty H2 Solid State Drive
HPE 3.2TB 12G SAS Mixed Use-3 SFF 2.5-in SC 3yr Wty Solid State Drive
805351-B21
836220-B21
805349-B21
805347-B21
726536-B21
726537-B21
718162-B21
785069-B21
652589-B21
781516-B21
759212-B21
652583-B21
759210-B21
652572-B21
785067-B21
759208-B21
652564-B21
741159-B21
779168-B21
779172-B21
822567-B21
Page 21
QuickSpecs
HPE ProLiant DL380 Generation9 (Gen9)
Carrier Grade Supplement
Core Options
HPE 1.6TB 12G SAS Mainstream Endurance SFF 2.5-in ENT Mainstream SC 3yr
Wty H2 Solid State Drive
12G SAS Hot Plug SFF (2.5-inch) SC Mixed Use Solid State Drives
HPE 1.6TB 12G SAS Mixed Use-1 SFF (2.5in) SC
3yr Wty Solid State
HPE 800GB 12G SAS Mixed Use-1 SFF (2.5in) SC
3yr Wty Solid State Drive
16G SATA Hot Plug SFF (2.5-inch) SC Write Intensive Solid State Drives
HP 200GB 6G SATA Write Intensive-2 SFF 2.5-in SC 3yr Wty Solid State Drive
HPE Networking
779176-B21
846436-B21
846434-B21
804639-B21
1 Gigabit Ethernet adapters
HPE Ethernet 1Gb 4-port 331T Adapter
647594-B21
HPE Ethernet 1Gb 2-port 332T Adapter
615732-B21
HPE Ethernet 1Gb 2-port 361T Adapter
652497-B21
HPE Ethernet 1Gb 4-port 366T Adapter
811546-B21
10 Gigabit Ethernet adapters
HPE Ethernet 10Gb 2-port 530SFP Adapter
652503-B21
HPE Ethernet 10Gb 2-port 530T Adapter
656596-B21
HPE Ethernet 10Gb 2-port 557SFP+ Adapter
788995-B21
HPE Ethernet 10Gb 2-port 560SFP+ Adapter
665249-B21
HPE Ethernet 10Gb 2-port 561T Adapter
716591-B21
HPE Ethernet 10Gb 2-port 562SFP+ Adapter
817753-B21
HPE Ethernet 10/25Gb 2-port 640SFP28 Adapter
727055-B21
817762-B21
25 Gigabit Ethernet adapters
HPE Ethernet 4x25Gb 1-port 620QSFP28 Adapter
NOTE: Initially available as a BTO only option.
NOTE: The DL380 Gen9 chassis ships with 4x1Gb Embedded.
NOTE: A minimum of two Gigabytes (2 GB) of server memory is required per each adapter.
NOTE: Direct Attach Cable (DAC) for copper environments or fiber transceivers and cables for
fiber-optic environments must be purchased separately. Please see the related NIC QuickSpecs for
Technical Specifications and additional information: http://www.hp.com/go/ProLiantNICs.
HPE Infiniband Adapters
764284-B21
HP InfiniBand FDR/Ethernet 10Gb/40Gb 2-port 544+QSFP Adapter
FlexibleLOM Adapters
HPE Ethernet 1Gb 4-port 331FLR Adapter
629135-B22
HPE Ethernet 1Gb 4-port 366FLR Adapter
665240-B21
HPE FlexFabric 10Gb 2-port 533FLR-T Adapter
700759-B21
HPE FlexFabric 10Gb 2-port 534FLR-SFP+ Adapter
700751-B21
HPE FlexFabric 10Gb 2-port 556FLR-SFP+ Adapter
727060-B21
HPE Ethernet 10Gb 2-port 562FLR-SFP+ Adapter
727054-B21
NOTE: The DL380 Gen9 chassis ships with 4x1Gb Embedded.
NOTE: Only one FlexibleLOM can be added to the server. These options are upgradeable and can
be changed from the original configuration after the server is shipped.
NOTE: Direct Attach Cable (DAC) for copper environments or fiber transceivers and cables for
fiber-optic environments must be purchased separately. Please see the related NIC QuickSpecs for
Technical Specifications and additional information: http://www.hp.com/go/ProLiantNICs.
Page 22
HPE ProLiant DL380 Generation9 (Gen9)
Carrier Grade Supplement
QuickSpecs
Core Options
HPE PCIe
Workload
Accelerator
Options
NVME PCIe Workload Accelerators
HPE 3.2TB Read Intensive-2 HH/HL PCIe Workload Accelerator
HPE 1.6TB Read Intensive-2 HH/HL PCIe Workload Accelerator
HPE 1.3TB Read Intensive-2 HH/HL PCIe Workload Accelerator
HPE I/O Expansion HPE DL380 Gen9 Primary NEBS Conversion Cage Kit
Options
NOTE: NEBS Certified Primary PCIe Riser.
Slot2: 2xGen3 x16 FH/FL, 1xGen3 x8 FH/HL
HPE DL380 Gen9 Secondary NEBS Conversion Cage Kit
NOTE: NEBS Certified Secondary PCIe Riser.
NOTE: It is no longer necessary to purchase the commercial riser option and the
NEBS conversion kit. The Gen9 NEBS conversion cage ships as a complete
product with both the cage and PCIe riser installed.
HPE Storage
Controllers
HPE Power
Supplies
SAS Controllers
HPE Flexible Smart Array Controllers
HPE Smart Array P440ar/2GB FBWC 12Gb 2-ports Int SAS Controller
NOTE: Provides support for up to 8 internal SAS/SATA drives without using a
PCIe slot.
NOTE: Includes the HPE Smart Storage Battery.
HP Smart Array P440ar/2GB FBWC 12Gb 2-ports Int FIO SAS Controller
NOTE: Provides support for up to 8 internal SAS/SATA drives without using a
PCIe slot.
NOTE: Includes the HPE Smart Storage Battery.
NOTE: FIO indicates factory integrated option via CTO.
HPE Smart Array P840ar/2GB FBWC 12Gb 2-port Internal SAS Controller
NOTE: Provides support for up to 16 internal SAS/SATA drives without using a
PCIe slot.
NOTE: Includes the HPE Smart Storage Battery.
HPE Smart Array Controllers
HPE Smart Array P840/4GB FBWC 12Gb 2-ports Int SAS Controller
HP Smart Array P840/4GB FBWC 12Gb 2-ports Int FIO SAS Controller
NOTE: Includes the HPE Smart Storage Battery.
NOTE: When ordering controllers, please reference the HPE Cable Options
below for the required cable.
NOTE: FIO indicates factory integrated option via CTO.
HP 96W Smart Storage Battery with 145mm Cable for DL/ML/SL Servers
NOTE: Provides backup power for multiple HPE Smart Array controllers or
other devices (up to 16).
NOTE: Ships as standard with some HPE Flexible Smart Array Controllers.
HPE Smart Host Bus Adapters
HPE H241 12Gb 2-ports Ext Smart Host Bus Adapter
HPE H240ar 12Gb 2-ports Int Smart Host Bus Adapter
NOTE: Provides support for up to 8 internal SAS/SATA drives without using a
PCIe slot.
HPE Flex Slot Platinum Hot-plug Power supplies
HPE 800W Flex Slot Platinum Hot Plug Power Supply Kit
NOTE: Flex Slot Platinum power supplies support power efficiency of up to 94%
and include a standard C-14 power inlet connector.
831737-B21
831735-B21
831733-B21
719070-B21
783286-B21
726736-B21
749974-B21
843199-B21
726897-B21
761874-B21
727258-B21
726911-B21
726757-B21
720479-B21
Page 23
QuickSpecs
HPE ProLiant DL380 Generation9 (Gen9)
Carrier Grade Supplement
Core Options
HPE Cooling
Options
HPE 800W Flex Slot -48VDC Hot Plug Power Supply Kit
NOTE: Flex Slot -48VDC power supplies support power efficiency of up to 94%.
HPE 500W Flex Slot Platinum Hot Plug Power Supply Kit
NOTE: Flex Slot Platinum power supplies support power efficiency of up to 94%
and include a standard C-14 power inlet connector.
NOTE: All power supplies must be of the same input voltage, output rating, and
efficiency rating. If non-matching power supplies are installed, you may receive
an error message and/or experience operational issues with your server.
NOTE: Mixing different power supplies in the same server may limit or disable
some power supply features including support for power redundancy. To
ensure access to all available features, all power supplies within the same server
should have the same output and efficiency ratings.
NOTE: Prior to selecting a power supply option, it is highly recommended that
you review your server configuration in the HPE Power Advisor tool to
determine the right size power supply for your server configuration. The HPE
Power Advisor is located at: http://www.hpe.com/info/hppoweradvisor.
720480-B21
HPE DL380 Gen9 High Performance Fan Kit
NOTE: Required for NEBS Compliance.
NOTE: High Performance Fan kit consists of 6 fans, these will need to replace all
the standard Fans in the unit, and fill all 6-Fan cages.
NOTE: The High Performance Fan Kit is needed to support certain Passive
GPGPU (Graphics cards) configurations; or ASHRAE operating environments.
NOTE: For elevated ambient temperature support please see:
http://www.hpe.com/servers/ashrae.
719079-B21
720478-B21
Page 24
HPE ProLiant DL380 Generation9 (Gen9)
Carrier Grade Supplement
QuickSpecs
Additional Options
NOTE: Some options may not be integrated at the factory. To ensure only valid configurations are ordered, Hewlett Packard
Enterprise recommends the use of a Hewlett Packard Enterprise approved configurator. Contact your local sales representative for
additional information.
HPE Insight
HPE Insight Control
Software
HPE Insight Control including 1yr 24x7 Technical Support and Updates Single
C6N27A
Server License
HPE Insight Control including 1yr 24x7 Technical Support and Updates Electronic
C6N28ABE
License
HPE Insight Control Server Provisioning Media Kit
BD883A
HPE Insight Management Media Kit
C6N31A
NOTE: Electronic and Flexible-Quantity licenses can be used to purchase
multiple licenses with a single activation key.
NOTE: Customer will receive a license entitlement certificate. The license
entitlement certificate must be redeemed online or via fax in order to obtain the
license activation key(s). Includes one year of 24 x 7 HPE Software Technical
Support and Update Service.
NOTE: Licenses ship without media. The HPE Insight Control Media Kit can be
ordered separately, or can be downloaded
at: http://www.hp.com/go/insightupdates.
NOTE: For additional license options please see the QuickSpecs
at: https://www.hpe.com/h20195/v2/GetHTML.aspx?docname=c04123391.
HPE Insight Control including 1yr 24x7 Support ProLiant ML/DL/BL-bundle
C6N36A
Single Server FIO License
HPE Insight Control including 1yr 24x7 Support ProLiant ML/DL/BL-bundle FIO
C6N36ABE
Electronic License
Embedded
Management
HPE Converged
Infrastructure
Management
Software
HPE iLO Advanced
HPE iLO Advanced including 1yr 24x7 Technical Support and Updates Single
Server License
HPE iLO Advanced 1 Server License with 3yr 24x7 Tech Support and Updates
HPE iLO Advanced including 1yr 24x7 Technical Support and Updates E-LTU
HPE iLO Advanced including 3yr 24x7 Technical Support and Updates E-LTU
HPE OneView Advanced (with HPE iLO Advanced)
HPE OneView incl 3yr 24x7 Supp Phys 1 Svr Lic
HPE OneView incl 3yr 24x7 Supp Flex Qty E-LTU
HPE OneView for ProLiant DL Server incl 3yr 24x7 Supp FIO Bundle Physical 1
Svr Lic
HPE OneView Advanced (without HPE iLO Advanced)
HPE OneView w/o iLO Adv incl 3yr 24x7 Supp Phys 1 Svr Lic
HPE OneView w/o iLO Adv inc 3yr 24x7 Supp Flex Qty E-LTU
HPE OneView Media Kit Phys No Lic
HPE Operations Analytics for HPE OneView LTU
HPE Operations Analytics for HPE OneView E-LTU
NOTE: Full licenses of HPE OneView Advanced also provide the right-to-use
HPE Insight Control without additional charge.
NOTE: Server provisioning (via 'HPE Insight Control server provisioning') is
licensed as part of HPE OneView Advanced and provides multi-server OS and
512485-B21
BD505A
E6U59ABE
E6U64ABE
E5Y34A
E5Y35AAE
E5Y43A
E5Y38A
E5Y39AAE
E5Y37A
K8G29A
K8G29AAE
Page 25
HPE ProLiant DL380 Generation9 (Gen9)
Carrier Grade Supplement
QuickSpecs
Additional Options
driver provisioning. Media kit #BD883A can be ordered for a physical copy of
this software (USB flash drive).
NOTE: Licenses ship without media. The HPE OneView Media Kit can be
ordered separately, or can be downloaded at: http://www.hp.com/go/oneview.
NOTE: Electronic and Flexible-Quantity licenses can be used to purchase
multiple licenses with a single activation key.
High Performance HPE Cluster Management Utility
Clusters
HPE Insight Cluster Management Utility 1yr 24x7 Flexible License
HPE Insight Cluster Management Utility 3yr 24x7 Flexible License
NOTE: These part numbers can be used to purchase one certificate for multiple
licenses and support with a single activation key. Each license is for one node
(server). Customer will receive a printed end user license agreement and license
entitlement certificate via physical shipment. The license entitlement certificate
must be redeemed online in order to obtain a license key. Customer also will
receive a support agreement.
HPE Insight Cluster Management Utility Media
NOTE: For additional license kits please see the QuickSpecs
at: http://h18004.www1.hp.com/products/QuickSpecs/12612_div/12612_div.html.
HPE Security
HPE Trusted Platform Module Option
NOTE: The TPM (Trusted Platform Module) is a microcontroller chip that can
securely store artifacts used to authenticate the server platform. These artifacts can
include passwords, certificates and encryption keys. Windows® BitLocker™ Drive
Encryption (BitLocker) is a data protection feature available in Windows Server®
2008. BitLocker leverages the enhanced security capabilities of a Trusted Platform
Module (TPM) version 1.2. The TPM works with BitLocker to help protect user data
and to ensure that a server running Windows Server 2008 has not been tampered
with while the system was offline. For more information about TPM, including a
white paper, go to: http://www.hp.com/go/TPM.
NOTE: ProLiant OS pre-installed units will come with the partition required for TPM
deployment.
NOTE: The TPM key is unique to every TPM deployed server and must be retained.
Misplacing or losing the key could result in data loss.
HPE Storage
Controllers
SAS Controllers
Optional Software
HPE Secure Encryption No Media Flexible License per Drive
HPE Secure Encryption No Media E-LTU per Drive
NOTE: HPE Secure Encryption is supported when one of the supported Smart Array
Controllers or the supported Smart SAS HBA (configured in a RAID mode) is
installed in the server.
HPE Secure Encryption licensing is based on the number of physical drives
requiring encryption.
NOTE: For more information about HPE Secure Encryption, go
to http://www.hp.com/go/hpsecureencryption.
HPE SmartCache No Media 24x7 Technical Support 1 Svr License
HPE SmartCache No Media 24x7 Technical Support Flexible License
HPE SmartCache No Media 24x7 Technical Support Electronic License
NOTE: HPE SmartCache is supported when one of the supported Smart Array
Controllers is installed in the server.
QL803B
BD476A
BD477A
488069-B21
D8S84A
D8S85AAE
D7S26A
D7S27A
D7S27AAE
Page 26
HPE ProLiant DL380 Generation9 (Gen9)
Carrier Grade Supplement
QuickSpecs
Additional Options
NOTE: HPE SmartCache comes standard (no licensing is required) if the HPE Smart
Array P840 Controller is installed in the server.
HPE Storage
Options
NOTE: For the complete listing of Fibre Channel Host Bus Adapters for Windows 2000, Windows Server
2003 and Linux, please see: http://h18006.www1.hp.com/storage/saninfrastructure/hba.html.
QLogic Fibre Channel HBAs
HPE 82Q 8Gb 2-port PCIe Fibre Channel Host Bus Adapter
AJ764A
HPE StoreFabric SN1000Q 16GB 2-port PCIe Fibre Channel Host Bus Adapter
QW972A
Converged Network Adapter
HPE StoreFabric CN1100R Dual Port Converged Network Adapter
QW990A
HPE Rack Mount
Rail Kit
HPE 2U Small Form Factor Ball Bearing Rail
NOTE: Gen9 rail kits have changed significantly from prior generation rail kits.
Please take a moment to review the installation documentation that comes with the
server to help you with the installation of your Gen9 server.
NOTE: Rail kits are optional for DL380 Gen9 and are no longer included standard
with the server. Customers have the option to purchase their server without a rail kit.
NOTE: Ball bearing and Easy Install rail kits contain telescoping rails which allow for
in-rack serviceability.
NOTE: To assist in the installation of the server into the rack an optional installation
tool is available by contacting your local services representative (P/N: 695539-001).
CAUTION: Hewlett Packard Enterprise recommends that a minimum of two people
are required for all Rack Server installations. Please refer to your installation
instructions for proper tools and number of people to use for any installation.
HPE Care Pack
Services
Installation & Start-up Services
HPE Install ProLiant DL38x(p) Service
HPE Startup ProLiant DL38x(p) Service
Proactive Care
HPE 3 year 24x7 DL380 Gen9 w/IC Proactive Care Service
HPE 3 year 24x7 with Defective Media Retention DL380 Gen9 w/IC Proactive Care
Service
HPE 3 year 24x7 w/ Comprehensive Defective Material Retention DL380 Gen9 w/IC
Proactive Care Service
HPE 3 year Call to Repair DL380 Gen9 w/IC Proactive Care Service
HPE 3 year Call to Repair with Defective Media Retention DL380 Gen9 w/IC Proactive
Care Service
HPE 3 year CTR with Comprehensive Defective Material Retention DL380 Gen9 w/IC
Proactive Care Service
HPE 3 year 24x7 DL380 Gen9 Proactive Care Service
HPE 3 year 24x7 with Defective Media Retention DL380 Gen9 Proactive Care Service
HPE 3 year 24x7 with Comprehensive Defective Material Retention DL380 Gen9
Proactive Care Service
HPE 3 year Call to Repair DL380 Gen9 Proactive Care Service
HPE 3 year Call to Repair with Defective Media Retention DL380 Gen9 Proactive Care
Service
HPE 3 year CTR with Comprehensive Defective Material Retention DL380 Gen9
Proactive Care Service
720863-B21
U4554E
U4555E
U5HW1E
U5HW2E
U5HW3E
U5HX0E
U5HX1E
U5HX2E
U7AE8E
U7AE9E
U7AF0E
U7AF4E
U7AF5E
U7AF6E
Page 27
HPE ProLiant DL380 Generation9 (Gen9)
Carrier Grade Supplement
QuickSpecs
Storage
8 SFF (+2 SFF) hot-plug drive model with Universal Media Bay
16 SFF (+2 SFF) hot-plug drive model with Universal Media Bay
1-8
8 x SFF SATA/SAS/SDD Hot Pluggable Hard drive
bays
9-24
16 x SFF SATA/SAS/SDD Hot Pluggable Hard
drive bays
Page 28
HPE ProLiant DL380 Generation9 (Gen9)
Carrier Grade Supplement
QuickSpecs
Technical Specifications
System Unit
Dimensions
(H x W x D)
SFF Drives
Weight
(approximate)
Maximum:
8 SFF Chassis 51.5 lb. (23.6 kg)
(all hard drives,
power supply, and
processor
installed)
Minimum:
8SFF Chassis 32.6 lb. (14.759 kg)
(one hard drive,
power supply, and
processor
installed)
3.44 x 17.54 x 26.75 in (8.73 x 44.55 x 67.94 cm)
Input
Range Line
Requirements
Voltage
(per power supply)
100 to 120 VAC
200 to 240 VAC
-40 to -72 VDC
Maximum
BTU Rating
For 800W AC Power Supply: 3207 BTU/hr (at 100 VAC),
3071 BTU/hr (at 200 VAC), 3112 BTU/hr (at 240 VAC) for
China Only
For 800W DC Power Supply: 3008 BTU/hr (at -40 VDC), 2971
BTU/hr (at -48 VDC), 2929 BTU/hr (at -72 VDC)
Rated SteadyPower Supply
For 800W AC Power Supply: 800W (at 100 VAC), 800W (at
State Power
Output
240 VAC), 800W (at 240 VAC) input for China only
For 800W DC Power Supply: 800W (at -40 VDC), 800W (at (per power supply)
48 VDC), 800W (at -72 VDC)
Maximum Peak
For 800W AC Power Supply: 800W (at 100 to 127 VAC),
Power
800W (at 200 to 240 1VAC), 800W (at 240 VAC) input for
China only
For 800W DC Power Supply: 800W (at -40 VDC), 800W (at 48 VDC), 800W (at -72 VDC)
Extended Ambient For approved hardware configurations, the supported system
System Inlet
Operating Support inlet range is extended to be: 5° to 10°C (41° to 50°F) and 35°
Temperature
to 40°C (95° to 104°F) at sea level with an altitude derating of
1.0°C per every 175 m (1.8°F per every 574 ft) above 900 m
(2953 ft) to a maximum of 3050 m (10,000 ft). The approved
hardware configurations for this system are listed at the
URL: http://www.hpe.com/servers/ashrae
For approved hardware configurations, the supported system
inlet range is extended to be: 40° to 45°C (104° to 113°F) at
sea level with an altitude derating of 1.0°C per every 125 m
(1.8°F per every 410 ft) above 900 m (2953 ft) to a maximum
of 3050 m (10,000 ft). The approved hardware configurations
for this system are listed at the
URL: http://www.hpe.com/servers/ashrae
System performance may be reduced if operating in the
extended ambient operating range or with a fan fault.
Page 29
HPE ProLiant DL380 Generation9 (Gen9)
Carrier Grade Supplement
QuickSpecs
Technical Specifications
Operating
GR-63-CORE, Section 4.1.2: Shelf Level Operating
Temperature and Humidity
ETSI EN 300 019-2-3: Stationary Use at Weather Protected
Locations, Class 3.1E
Non-operating
GR-63-CORE, Section 4.1.1, Transportation and Storage
Environment
ETSI EN 300 019-2-1: Storage, Class 1.2
ETSI EN 300 019-2-2: Transportation, Class 2.3
Relative Humidity Operating
GR-63-CORE, Section 4.1.2: Shelf Level Operating
Temperature and Humidity
ETSI EN 300 019-2-3: Stationary Use at Weather Protected
Locations, Class 3.1E
(non-condensing) Non-operating
GR-63-CORE, Section 4.1.1: Transportation and Storage
Environment
ETSI EN 300 019-2-1:Storage, Class 1.2
Operating
Altitude
GR-63-CORE, Section 4.1.3: Shelf Level Altitude
Non-operating
9144 m (30,000 ft). Maximum allowable altitude change rate is
457 m/min (1500 ft/min).
FCC Rating
Class A
Emissions
Telecom
GR-1089-CORE, Section 3: Electromagnetic Interference
Classification
(EMC)
ETSI EN 300 386: Electromagnetic Compatibility
Normative
CISPR 22; EN55022; EN55024; FCC CFR 47, Pt 15; ICES-003;
Standards
CNS13438; GB9254; K22;K24; EN 61000-3-2; EN 61000-3-3;
EN 60950-1; IEC 60950-1
NOTE: Product conformance to cited product specifications is based on sample
(type) testing, evaluation, or assessment. This product or family of products is
eligible to bear the appropriate compliance logos and statements.
NOTE: The Listed sound levels apply to standard shipping configurations.
Additional options may result in increased sound levels.
Environmentfriendly Products
and Approach
End-of-life
Management and
Recycling
Hewlett Packard Enterprise offers end-of-life product return, trade-in, and recycling
programs, in many geographic areas, for our products. Products returned to
Hewlett Packard Enterprise will be recycled, recovered or disposed of in a
responsible manner.
http://www.hpe.com/recycle
The EU WEEE directive (2002/95/EC) requires manufacturers to provide
treatment information for each product type for use by treatment facilities. This
information (product disassembly instructions) is posted on the Hewlett Packard
Enterprise web site. These instructions may be used by recyclers and other WEEE
treatment facilities as well as Hewlett Packard Enterprise OEM customers who
integrate and re-sell Hewlett Packard Enterprise equipment.
http://www.hpe.com/recycle
Page 30
HPE ProLiant DL380 Generation9 (Gen9)
Carrier Grade Supplement
QuickSpecs
Summary of Changes
Date
23-Oct-2017
Version History
From Version 5 to 6
Action
Changed
4-Sep-2017
From Version 4 to 5
Added
Removed
12-Jun-2017
10-Mar-2017
From Version 3 to 4
From Version 2 to 3
Changed
Added
15-Apr-2016
From Version 1 to 2
Added
Changed
Description of Change
Care Pack naming and Service and Support- Parts and
Materials updated.
Added new HPE Storage Controllers.
Obsolete storage options were removed from the
QuickSpecs.
HPE Unique Options section was revised.
Added new HPE Processors.
New options were added to the HPE Unique Options,
HPE Memory, HPE Drives, HPE Networking, HPE PCIe
Workload Accelerator Options, and HPE Power Supplies
sections.
HPE Storage Controllers section was added to Core
Options.
HPE Processors, HPE Memory, HPE Drives, HPE
Networking, and HPE I/O Expansion Options were
revised.
Sign up for updates
© Copyright 2017 Hewlett Packard Enterprise Development LP. The information contained herein is
subject to change without notice. The only warranties for Hewlett Packard Enterprise products and
services are set forth in the express warranty statements accompanying such products and services.
Nothing herein should be construed as constituting an additional warranty. Hewlett Packard Enterprise
shall not be liable for technical or editorial errors or omissions contained herein.
Intel® and Xeon® are registered trademarks of Intel Corporation in the U.S. and other countries.
Microsoft®, Windows®, and Windows Server® are U.S. registered trademarks of the Microsoft group of
companies.
For hard drives, 1GB = 1 billion bytes. Actual formatted capacity is less
c04772942 - 15363 - Worldwide - V6 - 23-October-2017
Page 31