. . .
c o n n e c t i n g
y o u r
LANCOM 8011 VPN
Central site VPN gateway for networking up to 1,000 sites
쮿 Dynamic VPN gateway for up to 200 sites
쮿 Upgrade for 500/1000 simultaneous VPN channels
쮿 Status display
쮿 5 freely configurable 10/100 Mbps ports for LAN, WAN, DMZ
쮿 Quality of Service with dynamic bandwidth management and traffic shaping
쮿 Load balancing with up to 4 broadband connections
쮿 ISDN for Dynamic VPN, remote access, remote maintenance and LANcapi
쮿 High availability via Dynamic VPN endpoint and RIP, ISDN, modem and VRRP
쮿 VPN hardware acceleration for 3- DES/AES encryption and decryption
b u s i n e s s
LANCOM 8011 VPN is the top of the range of LANCOM highly integrated VPN networking components and serves as a central- site VPN gateway for mid- sized and large sites.
With VPN acceleration in hardware, professional Quality of Service and load balancing for up to 4 WAN connections, this high- performance VPN router has sufficient capacity for
broadband site coupling and mobile VPN dial- in connections. Equipped with 200 VPN channels as standard, the LANCOM 8011 VPN can be upgraded to support up to 500 or 1000
remote sites.
Particularly advantageous is LANCOM Dynamic VPN, the IPSec extension that actively establishes connections to remote sites with dynamic IP addresses–even when the remote
site is not always on.
More Security.
The integrated firewall with the latest security functions such as stateful inspection, intrusion detection and denial- of- service protection is supplemented by dynamic bandwidth
management and comprehensive backup, high- availability and redundancy functions over ISDN and VRRP. VPN that uses the IPSec standard provides optimal security for connecting
branch offices and telecommuters thanks to the high- security 3- DES or AES encryption, integrated hardware acceleration and support of digital certificates.
More Management.
The management systems LANconfig and LANmonitor are included and offer not only cost- effective remote maintenance of entire installations and highly convenient setup wizards,
but also full real- time monitoring and logging. What’s more, service providers benefit from the broad range of scripting methods and professional access with individual access
rights for administrators via SSH, HTTPS, TFTP and ISDN dial- in.
More Benefits.
The versatile functions for address translation and routing allow completely different networks to be connected over common infrastructure. Existing networks at partner companies,
home- office workstations or subsidiaries can be integrated into the VPN without problem. With the option of port separation and a separate address range, your own web servers
can be securely separated from the LAN.
The integrated ISDN interface allows remote field installations, dial- up access and CAPI featured functions such as fax services for all connected PCs.
More Reliability for the Future.
From the very start, LANCOM products are designed for a product life of several years. They are equipped with hardware dimensioned for the future. Even reaching back to older
product generations, updates to the LANCOM Operating System–LCOS–are available several times a year, free of charge and offering major features. LANCOM offers unbeatable
protection of your investment!
LANCOM 8011 VPN
Scope of features: as of LCOS version 7.6
Firewall
Stateful inspection firewall
Incoming/Outgoing Traffic inspection based on connection information. Trigger for firewall rules depending on backup status,
e.g. simplified rule sets for low- bandwidth backup lines. Limitation of the number of session per remote site (ID)
Packet filter
Check based on the header information of an IP packet (IP or MAC source/destination addresses; source/destination ports,
DiffServ attribute); remote- site dependant, direction dependant, bandwidth dependant
Extended port forwarding
Network Address Translation (NAT) based on protocol and WAN address, i.e. to make internal webservers accessible from WAN
N:N IP address mapping
N:N IP address mapping for translation of IP addresses or entire networks
Tagging
The firewall marks packets with routing tags, e.g. for policy- based routing
Actions
Forward, drop, reject, block sender address, close destination port, disconnect
Notification
Via e- mail, SYSLOG or SNMP trap
Quality of Service
Traffic shaping
Dynamic bandwidth management with IP traffic shaping
Bandwidth reservation
Dynamic reservation of minimum and maximum bandwidths, totally or connection based, separate settings for send and receive
directions. Setting relative bandwidth limits for QoS in percent
DiffServ/TOS
Priority queuing of packets based on DiffServ/TOS fields
Packet- size control
Automatic packet- size control by fragmentation or Path Maximum Transmission Unit (PMTU) adjustment.
Layer 2/Layer 3 tagging
Automatic or fixed translation of layer- 2 priority information (802.11p- marked Ethernet frames) to layer- 3 DiffServ attributes in
routing mode. Translation from layer 3 to layer 2 with automatic recognition of 802.1p- support in the destination device.
Security
Intrusion Prevention
Monitoring and blocking of login attempts and port scans
IP spoofing
Source IP address check on all interfaces: only IP addresses belonging to the defined IP networks are allowed
Access control lists
Filtering of IP or MAC addresses and preset protocols for configuration access and LANCAPI
Denial of Service protection
Protection from fragmentation errors and SYN flooding
General
Detailed settings for handling reassembly, PING, stealth mode and AUTH port
URL blocker
Filtering of unwanted URLs based on DNS hitlists and wildcard filters
Password protection
Password- protected configuration access can be set for each interface
Alerts
Alerts via e- mail, SNMP- Traps and SYSLOG
Authentication mechanisms
PAP, CHAP, MS- CHAP and MS- CHAPv2 as PPP authentication mechanism
Anti- theft
Anti- theft ISDN site verification over B or D channel (self- initiated call back and blocking)
Adjustable reset button
Adjustable reset button for "ignore", "boot- only" and "reset- or- boot"
High availability / redundancy
VRRP
VRRP (Virtual Router Redundancy Protocol) for backup in case of failure of a device or remote station. Enables passive standby
groups or reciprocal backup between multiple active devices including load balancing and user definable backup priorities
FirmSafe
For completely safe software upgrades thanks to two stored firmware versions, incl. test mode for firmware updates
ISDN backup
In case of failure of the main connection, a backup connection is established over ISDN; automatic return to the main connection
Analog/GSM modem backup
Optional operation of an analog or GSM modem at the serial interface
Load balancing
Static and dynamic load balancing over up to 4 WAN connections; channel bundling with Multilink PPP (if supported by network
operator)
VPN redundancy
Control of up to 16 redundant VPN gateways for high availability or load balancing
Line monitoring
Line monitoring with LCP echo monitoring, dead- peer detection and up to 4 addresses for end- to- end monitoring with ICMP
polling.
VPN
1- Click- VPN Client assistant
One click function in LANconfig to create VPN client connections, incl. automatic profile creation for the LANCOM Advanced
VPN Client
1- Click- VPN Site- to- Site
Creation of VPN connections between LANCOM router via drag and drop in LANconfig
Number of VPN tunnels
200 IPSec connections active simultaneously (500 with VPN- 500 Option, 1000 with VPN- 1000 Option),unlimited configurable
connections. Configuration of all remote sites via one configuration entry when using the RAS user template or Proadaptive VPN
Hardware accelerator
Integrated hardware accelerator for 3DES/AES encryption and decryption
IKE
IPSec key exchange with Preshared Key or certificate
Certificates
X.509 digital multi- level certificate support, compatible with Microsoft Server / Enterprise Server and OpenSSL, upload of
PKCS#12 files via HTTPS interface and LANconfig. Secure Key Storage protects a private key (PKCS#12) from theft
Certificate rollout
Automatic creation, rollout and renewal of certificates via SCEP (Simple Certificate Enrollment Protocol)
LANCOM 8011 VPN
Scope of features: as of LCOS version 7.6
VPN
Certificate revocation lists (CRL)
CRL retrieval via HTTP
XAUTH
XAUTH client for registering LANCOM routers and access points at XAUTH servers incl. IKE- config mode. XAUTH server enables
clients to register via XAUTH at LANCOM routers
RAS user template
Configuration of all VPN client connections in IKE ConfigMode via a single configuration entry
Proadaptive VPN
Automated configuration and dynamic creation of all necessary VPN and routing entries based on a default entry for site- tosite connections. Propagation of dynamically learned routes via RIPv2, if required.
VPN Backup
Backup of VPN connections across different hierarchy levels, e.g. in case of failure of a central VPN concentrator and re- routing
to multiple distributed remote sites. Any number of VPN remote sites can be defined (the tunnel limit applies only to active
connections)
Algorithms
3DES (168 bit), AES (128, 192 or 256 bit), Blowfish (128 bit), RSA (128 or - 448 bit) and CAST (128 bit). OpenSSL implementation
with FIPS- 140 certified algorithms. MD- 5 or SHA- 1 hashes
NAT- Traversal
NAT- Traversal (NAT- T) support for VPN over routes without VPN passthrough
IPCOMP
VPN data compression based on LZS or Deflate compression for higher IPSec throughput
LANCOM Dynamic VPN
Enables VPN connections from or to dynamic IP addresses. The IP address is communicated via ISDN B- or D- channel or with
the ICMP or UDP protocol in encrypted form. Dynamic dial- in for remote sites via connection template
Dynamic DNS
Enables the registration of IP addresses with a Dynamic DNS provider in the case that fixed IP addresses are not used for the
VPN connection
Specific DNS forwarding
DNS forwarding according to DNS domain, e.g. internal names are translated by proprietary DSN servers in the VPN; external
names are translated by Internet DNS servers.
VPN throughput (max.)*
1364- byte packet size
61 Mbps
265- byte packet size
12 Mbps
*) Notice
all VPN figures with AES encryption with UDP
Firewall throughput (max.)
1470- byte packet size UDP
93 Mbps
256- byte packet size UDP
23 Mbps
Routing functions
Router
IP, IPX and NetBIOS/IP multi- protocol router
VLAN
VLAN ID definable per interface and routing context (4,094 IDs)
Q- in- Q tagging
Support of layered 802.1q VLANs
Advanced Routing and Forwarding
Separate processing of 64 contexts due to virtualization of the routers. Mapping to VLANs and complete independent
management and configuration of IP networks in the device, i.e. individual settings for DHCP, DNS, Firewalling, QoS, VLAN,
Routing etc. Automatic learning of routing tags for ARF contexts from the routing table
HTTP
HTTP and HTTPS server for configuration by web interface
DNS
DNS client, DNS server, DNS relay, DNS proxy and dynamic DNS client
DHCP
DHCP client, DHCP relay and DHCP server with autodetection
NetBIOS
NetBIOS/IP proxy
NTP
NTP client and SNTP server, automatic adjustment for daylight- saving time
Policy- based routing
Policy- based routing based on routing tags. Based on firewall rules, certain data types are marked for specific routing, e.g. to
particular remote sites or lines.
Dynamic routing
Dynamic routing with RIPv2. Learning and propagating routes; separate settings for LAN and WAN. Extended RIPv2 including
HopCount, Poisoned Reverse, Triggered Update for LAN (acc. to RFC 2453) and WAN (acc. to RFC 2091) as well as filter options
for propagation of routes. Definition of RIP sources with wildcards
COM port server
COM port forwarding
COM- port server for the DIN interface. For a serial device connected to it, the server manages its own virtual COM port via Telnet
(RFC 2217) for remote maintenance (works with popular virtual COM- port drivers compliant with RFC 2217)
LAN protocols
IP
ARP, proxy ARP, BOOTP, LANCAPI, DHCP, DNS, HTTP, HTTPS, IP, ICMP, NTP/SNTP, NetBIOS, PPPoE (server), RADIUS, RIP- 1, RIP2, RTP, SIP, SNMP, TCP, TFTP, UDP, VRRP
IPX
RIP, SAP, IPX and SPX watchdogs, NetBIOS watchdogs
WAN protocols
Ethernet
PPPoE, Multi- PPPoE, ML- PPP, PPTP (PAC or PNS) and plain Ethernet (with or without DHCP), RIP- 1, RIP- 2, VLAN, IP
ISDN
1TR6, DSS1 (Euro- ISDN), PPP, X75, HDLC, ML- PPP, V.110/GSM/HSCSD, CAPI 2.0 via LANCAPI, Stac data compression
LANCOM 8011 VPN
Scope of features: as of LCOS version 7.6
Interfaces
WAN: Ethernet
10/100 Mbps Fast Ethernet
Ethernet ports
4 individual 10/100- Mbps Fast Ethernet ports; up to 3 ports can be switched as additional WAN ports with load balancing
- freely configurable
Each Ethernet port can be freely configured (LAN, DMZ, WAN, monitor port, off). LAN ports can be operated as a switch or
separately. Additionally, external DSL modems or termination routers can be operated as a WAN port with load balancing and
policy- based routing. DMZ ports can be operated with their own IP address range without NAT
ISDN
ISDN BRI port (S0 bus)
Serial interface
Serial configuration interface / COM port (8 pin Mini- DIN): 9,600 - 115,000 baud, suitable for optional connection of analog/
GPRS modems
Management
LANconfig
Configuration program for Microsoft Windows, incl. convenient Setup Wizards. Optional group configuration, simultaneous
remote configuration and management of multiple devices over ISDN dial- in or IP connection (HTTPS, HTTP, TFTP). Configuration
program properties per project or user. Automatic storage of the current configuration before firmware updates. Exchange of
configuration files between similar devices, e.g. for migrating existing configurations to new LANCOM products. Detection and
display of the LANCOM managed switches
LANmonitor
Monitoring application for Microsoft Windows for (remote) surveillance and logging of the status of LANCOM devices and
connections, incl. PING diagnosis and TRACE with filters and save to file. Search function within TRACE tasks. Wizards for
standard diagnostics. Export of diagnostic files for support purposes (including bootlog, sysinfo and device configuration
without passwords). Monitoring of the LANCOM managed switches
Firwall GUI
Graphical user interface for configuring the object- oriented firewall in LANconfig: Tabular presentation with symbols for rapid
understanding of objects, choice of symbols for objects, objects for actions/Quality of Service/remote sites/services, default
objects for common scenarios, individual object definition (e.g. for user groups)
WEBconfig
Integrated web server for the configuration of LANCOM devices via Internet browsers with HTTPS or HTTP. Similar to LANconfig
with a system overview, syslog and events display, symbols in the menu tree, quick access with side tabs. WEBconfig also
features Wizards for basic configuration, security, Internet access, LAN- LAN coupling. Online help for parameters in LCOS menu
tree
Device Syslog
Syslog buffer in the RAM (size depending on device memory) to store events for diagnosis. Default set of rules for the event
protocol in Syslog. The rules can be modified by the administrator. Display and saving of internal Syslog buffer (events) from
LANCOM devices with LANmonitor, display only with WEBconfig
Access rights
Individual access and function rights for up to 16 administrators
User administration
RADIUS user administration for dial- in access (PPP/PPTP and ISDN CLIP). Support for RADSEC (Secure RADIUS) for secure
communication with RADIUS servers.
Remote maintenance
Remote configuration with Telnet/SSL, SSH (with password or public key), browser (HTTP/HTTPS), TFTP or SNMP, firmware upload
via HTTP/HTTPS or TFTP
Remote maintenance of 3rd party
devices
A remote configuration for devices behind der LANCOM can be accomplished (after authentication) via tunneling of arbitrary
TCP- based protocols, e.g. for HTTP(S) remote maintenance of VoIP phones or printers of the LAN
ISDN remote maintenance
Remote maintenance over ISDN dial- in with calling- number check
TFTP & HTTP(S) client
For downloading firmware and configuration files from an TFTP, HTTP or HTTPS server with variable file names (wildcards for
name, MAC/IP address, serial number), e.g. for roll- out management. Commands for live Telnet session, scripts or CRON jobs
Security
Access rights (read/write) over WAN or LAN can be set up separately (Telnet/SSL, SSH, SNMP, HTTPS/HTTP), access control list
Scripting
Scripting function for batch- programming of all command- line parameters and for transferring (partial) configurations,
irrespective of software versions and device types, incl. test mode for parameter changes
SNMP
SNMP management via SNMP V2, private MIB exportable by WEBconfig, MIB II
Timed control
Scheduled control of parameters and actions with CRON service
Diagnosis
Extensive LOG and TRACE options, PING and TRACEROUTE for checking connections, LANmonitor status display, internal logging
buffer for SYSLOG and firewall events, monitor mode for Ethernet ports
Statistics
Statistics
Extensive Ethernet, IP and DNS statistics; SYSLOG error counter
Accounting
Connection time, online time, transfer volumes per station. Snapshot function for regular read- out of values at the end of a
billing period
Export
Accounting information exportable via LANmonitor and SYSLOG
Hardware
Power supply
Internal power supply unit (110–230 V, 50- 60 Hz)
Environment
Temperature range 5–40°C; humidity 0–95%; non- condensing
Housing
Robust metal housing, 19" 1 HU, 435 x 45 x 207 mm, with removable mounting brackets, network connectors on the front
Fans
None; fanless design without rotating parts, high MTBF
Declarations of conformity
CE
EN 55022, EN 55024, EN 60950
LANCOM 8011 VPN
Scope of features: as of LCOS version 7.6
Package content
Manual
Printed User Manual (DE, EN) and Quick Installation Guide (DE/EN/FR/ES/IT/PT/NL)
Reference manual
Printed LCOS reference manual
CD
CD with firmware, management software (LANconfig, LANmonitor, LANCAPI) and documentation
Cable
Serial configuration cable, 1.5m
Cable
2 Ethernet cables, 3m
Cable
ISDN cable, 3m
Cable
IEC power cord
Support
3 years
Support via Hotline and Internet KnowledgeBase
Software updates
Regular free updates (LCOS operating system and management tools) via Internet
Options
VPN
LANCOM VPN- 500 Option (500 channels), item no. 61402
VPN
LANCOM VPN- 1000 Option (1000 channels), item no. 61403
Service
LANCOM Service Option (24h advance replacement within Germany, 4 year warranty, not for PoE Power Injector), item no.
61401
Accessories
Modem Backup
LANCOM Modem Adapter Kit, item no. 61500
VPN Client Software
LANCOM Advanced VPN Client for Windows® 2000, Windows® XP, Windows Vista™, single license, item no. 61600
VPN Client Software
LANCOM Advanced VPN Client for Windows® 2000, Windows® XP, Windows Vista™, 10 licenses, item no. 61601
VPN Client Software
LANCOM Advanced VPN Client for Windows® 2000, Windows® XP, Windows Vista™, 25 licenses, item no. 61602
Item numbers
LANCOM 8011 VPN
61053
LANCOM 8011 VPN UK
61054
www.lancom.eu
LANCOM Systems GmbH I Adenauerstr. 20/B2 I 52146 Wuerselen I Deutschland I E-Mail info@lancom.eu I Internet www.lancom.eu
LANCOM, LANCOM Systems and LCOS are registered trademarks. All other names or descriptions used may be trademarks or registered trademarks of their owners. Subject to change without notice.
No liability for technical errors and/or omissions. 03/09
Warranty