Owner’s Manual
Multimedia Projector
Model EK-610U/EK-611W/EK-612X
(Projection lens is optional.)
Preface
Features and Design
This Multimedia Projector is designed with the most advanced technology for portability, durability, and
ease of use. This projector utilizes a high luminance and Eco friendly system, a palette of 1.07 billion
colors, and digital light processing (DLP) technology.
Compact Design
Helpful Maintenance Functions
This projector is designed compact in size and
weight. It is easy to carry and installed anywhere
you wish to use.
Simple Computer System Setting
Lamp and filter maintenance functions provide
for better and proper maintenance of the
projector.
LAN Network Function
The projector has the Multi-scan system to
conform to almost all computer output signals
quickly. Up to WUXGA resolution can be
accepted.
This projector is loaded with the Wired LAN
network function. You can operate and manage
the projector via network.
For details, refer to page 41 and pages
45-52.
Useful Functions for Presentations
The digital zoom function allows you to focus on
the crucial information during a presentation.
Lamp Control
Brightness of the projection lamp can be
manually selected (Constant Power or Eco
Mode).
Auto Setup Function
This function enables auto input search and auto
signal adjustment simply by pressing the Auto
button on the remote control.
Power Management
The Power management function reduces power
consumption and maintains the lamp life.
Logo Function
The Background function allows you to specify
the screen background (“Logo”, “Blue”, “Black”,
or “White” screen) when no signal is available.
Multilanguage Menu Display
Operation menu is available in 9 languages;
English, French, Spanish, German, Italian,
Russian, Simplified Chinese, Japanese, and
Korean.
Note:
The screen menu and pictures in the manual may slightly differ from the real product.
The manual is subject to change without prior notice.
—i—
DLP Projector — Owner’s Manual
Copyright
This publication, including all photographs, illustrations and software, is protected under international
copyright laws, with all rights reserved. Neither this manual, nor any of the material contained herein, may
be reproduced without written consent of the author.
© Copyright 2016
Disclaimer
The information in this document is subject to change without notice. The manufacturer makes no
representations or warranties with respect to the contents hereof and specifically disclaims any implied
warranties of merchantability or fitness for any particular purpose. The manufacturer reserves the right to
revise this publication and to make changes from time to time in the content hereof without obligation of
the manufacturer to notify any person of such revision or changes.
Trademark Recognition
All other product names used in this manual are the properties of their respective owners and are
acknowledged.
—
ii —
Preface
Important Safety Information
Important:
It is strongly recommended that you read this section carefully before using the projector. These safety
and usage instructions will ensure that you enjoy many years of safe use of the projector. Keep this
manual for future reference.
Symbols Used
Warning symbols are used on the unit and in this manual to alert you of hazardous situations. The
following styles are used in this manual to alert you to important information.
Note:
Provides additional information on the topic at hand.
Important:
Provides additional information that should not be overlooked.
Caution:
Alerts you to situations that may damage the unit.
Warning:
Alerts you to situations that may damage the unit, create a hazardous environment, or cause personal
injury.
Throughout this manual, component parts and items in the OSD menus are denoted in bold font as in this
example:
“Push the Menu button on the remote control to open the Main menu.”
General Safety Information
¾¾ Do not open the unit case. Aside from the projection lamp, there are no user-serviceable parts in the
unit. For servicing, contact qualified service personnel.
¾¾ Follow all warnings and cautions in this manual and on the unit case.
¾¾ The projection lamp is extremely bright by design. To avoid damage to eyes, do not look into the lens
when the lamp is on.
¾¾ Do not place the unit on an unstable surface, cart, or stand.
¾¾ Avoid using the system near water, in direct sunlight, or near a heating device.
¾¾ Do not place heavy objects such as books or bags on the unit.
—
iii —
DLP Projector — Owner’s Manual
Safety Instructions
• Please read this manual completely before installing and operating the projector.
• The projector provides many convenient features and functions. Proper operation may enable you to
fully utilize the features and keep it in good condition. Otherwise, it will not only shorten the service life
of the unit, but also may cause malfunction, a fire, or other accidents.
• If your projector cannot work properly, please read this manual again, check the operating methods and
cable connection, and try the solutions in the part of Troubleshooting. If the problem still exists, contact
the dealer or the service center.
• The lamp of the projector is a wearing part. The luminance may decrease after a period of operation
and be weaker than that of a new lamp. This is normal. Please strictly follow the steps in turning on the
unit and turning off the unit to turn on/off the projector, and the requirements in maintaining and cleaning
the projector to service and clean the projector regularly. Or the high temperature residual heat may not
radiate, greatly shortening the service life of the projector and lamp, or even damaging them within a
short period.
Caution:
ELECTRIC SHOCK DO NOT OPEN
Caution:
To reduce the risk of electric shock, do not remove cover (or back), no user serviceable parts
inside except lamp replacement. Refer servicing to qualified service personnel.
This symbol indicates that dangerous voltage constituting a risk of electric shock is present
within this unit.
This symbol indicates that there are important operating and maintenance instructions in the
user’s manual with this unit.
FOR EU USERS
The symbol mark and recycling systems described below apply to EU countries and do not apply to
countries in other areas of the world.
Your product is designed and manufactured with high quality materials and components which can be
recycled and/or reused.
The symbol mark means that electrical and electronic equipment, batteries and accumulators, at their
end-of-life, should be disposed of separately from your household waste.
Note:
If a chemical symbol is printed beneath the symbol mark, this chemical symbol means that the battery
or accumulator contains a heavy metal at a certain concentration. This will be indicated as
follows: Hg: mercury, Cd: cadmium, Pb: lead In the European Union there are separate
collection systems for used electrical and electronic equipment, batteries and accumulators.
Please, dispose of them correctly at your local community waste collection/recycling centre.
Please help us to conserve the environment we live in!
—
iv —
Preface
Safety Precautions
Caution:
• The projector must be grounded.
• Do not expose the projector to raindrops or high humidity to avoid a fire or electric shock.
• This projector produces intense light from the projection lens. Avoid staring directly into the lens,
otherwise eye damage could be caused. Be especially careful that children do not stare directly into the
beam.
• Place the projector in a proper position. Otherwise it may result in fire hazard.
• Leave an appropriate space from the sides and back of the shell in order to ventilate and cool down the
projector. To ensure proper ventilation for your projector, avoid placing the projector in a confined space
and make sure to allow at least 30 cm clearance around the vents as shown in the illustration below.
300mm
(12”)
300mm
(12”)
300mm
(12”)
• Do not cover the vent of the projector. Poor radiation may shorten the service life or even cause
dangers.
• Remove the AC power plug if the projector is not to be used for a long time.
Caution:
• Do not set the projector in greasy, wet, or smoky conditions such as in a kitchen, to prevent a
malfunction or accident. If the projector comes in contact with oil or chemicals, it may become
deteriorated.
• Read and keep this manual for future reference.
• The mains plug/appliance coupler is used as disconnect device, the disconnect device shall remain
readily operable.
—
v—
DLP Projector — Owner’s Manual
Safety Guide
• All the safety and operating instructions should be read before the product is operated.
• Read all of the instructions given here and retain them for later use. Unplug this projector from AC
power supply before cleaning. Do not use liquid or aerosol cleaners.
• Use a damp cloth for cleaning.
• Follow all warnings and instructions marked on the projector.
• For added protection to the projector during a lightning storm, or when it is left unattended and unused
for long periods of time, unplug it from the wall outlet. This will prevent damage due to lightning and
power line surges.
• Do not expose this unit to rain or use near water... for example, in a wet basement, near a swimming
pool, etc...
• Do not use attachments not recommended by the manufacturer as they may cause hazards.
• Do not place this projector on an unstable cart, stand, or table. The projector may fall, causing
serious injury to a child or an adult, and serious damage to the projector.
• Use only with a cart or stand recommended by the manufacturer, or sold with the projector.
Wall or shelf mounting should follow the manufacturer’s instructions, and should use a mounting kit
approved by the manufacturers.
• An appliance and cart combination should be moved with care. Quick stops, excessive force, and
uneven surfaces may cause the appliance and cart combination to overturn.
• Slots and openings in the back and bottom of the cabinet are provided for ventilation, to ensure reliable
operation of the equipment and to protect it from overheating.
• The openings should never be covered with cloth or other materials, and the bottom opening should not
be blocked by placing the projector on a bed, sofa, rug, or other similar surface. This projector should
never be placed near or over a radiator or heat register.
• This projector should not be placed in a build-in installation such as a book case unless proper
ventilation is provided.
• Never push objects of any kind into this projector through cabinet slots as they may touch dangerous
voltage points or short out parts that could result in a fire or electric shock. Never spill liquid of any kind
on the projector.
• Do not install the projector near the ventilation duct of air-conditioning equipment.
• This projector should be operated only from the type of power source indicated on the marking label.
• If you are not sure of the type of power supplied, consult your authorized dealer or local power
company.
• Do not overload wall outlets and extension cords as this can result in fire or electric shock. Do not allow
anything to rest on the power cord. Do not locate this projector where the cord may be damaged by
persons walking on it.
• Do not attempt to service this projector yourself as opening or removing the covers may expose you to
dangerous voltage or other hazards. Refer all servicing to qualified service personnel.
• Unplug this projector from wall outlet and refer servicing to qualified service personnel under the
following conditions:
¾¾ When the power cord or plug is damaged or frayed.
¾¾ If liquid has been spilled into the projector.
¾¾ If the projector has been exposed to rain or water.
¾¾ If the projector does not operate normally by following the operating instructions. Adjust only those
controls that are covered by the operating instructions as improper adjustment of other controls
may result in damage and will often require extensive work by a qualified technician to restore the
projector to normal operation.
¾¾ If the projector has been dropped or the cabinet has been damaged.
—
vi —
Preface
¾¾ When the projector exhibits a distinct change in performance - this indicates a need for service.
• When replacement parts are required, be sure the service technician has used replacement parts
specified by the manufacturer that have the same characteristics as the original part. Unauthorized
substitutions may result in fire, electric shock, or injury to persons.
• Upon completion of any service or repairs to this projector, ask the service technician to perform routine
safety checks to determine that the projector is in safe operating condition.
Information for users in the European Union
This is a device to project images onto a screen, etc., and is not intended for use as indoor lighting in a
domestic environment.
Directive 2009/125/EC.
Note for customers in the US
Lamp(s) inside this product contain mercury and must be recycled or disposed of according to
local state or federal laws.
Lamp(s) inside this product contain mercury and must be recycled or disposed of according to local state
or federal laws.
Air circulation
Vents in the cabinet are provided for ventilation. To ensure reliable operation of the product and to protect
it from overheating, these openings must not be blocked or covered.
Caution:
• Hot air is exhausted from the exhaust vent. When using or installing the projector, the following
precautions should be taken.
• Do not put any flammable objects, or spray can near the projector. Hot air is exhausted from the air
vents.
• Keep the exhaust vent at least 1m away from any objects.
• Do not touch a peripheral part of the exhaust vent, especially screws and metallic part. This area
will become hot while the projector is being used.
• Do not put anything on the projector. Objects put on the cabinet will not only get damaged but also
may cause fire hazard by heat.
• Cooling fans are provided to cool down the projector.
• The fan’s running speed is changed according to the temperature inside the projector.
Caution:
Contains mercury
• For more information on safe handling procedures, the measures to be taken in case of accidental
breakage and safe disposal options visit: ec.gc.ca/mercure-mercury/.
• Dispose of or recycle in accordance with applicable laws.
—
vii —
DLP Projector — Owner’s Manual
Exhaust Vent
Air Intake Vent
Moving the projector
When moving the projector, take care of the lens and retract the adjustable foot to prevent damage to the
lens and cabinet.
Installing the projector properly
• Please set the projector on nearly-level.
• Be sure to install the projector properly. Improper installation may reduce the lamp lifetime and even
cause a fire hazard.
• Do not roll the projector more than 20° from side to side.
• Do not put the projector on either side to project an image.
20°
20°
Caution in ceiling installation the projector
• Only qualified personal is authorized for ceiling installation.
• We are not responsible for the hurt and damage caused by ceiling bracket that purchased from
unauthorized dealer even in warranty period.
• Remove the ceiling bracket immediately while not use.
• While installing, torque screwdriver is suggested, don’t use electric or impact-type screwdriver.
• Please read the manual of bracket for details.
• The bracket is subject to change without notice.
—
viii —
Preface
M6 x 4
10mm
Caution in moving or transporting the projector
• Do not drop or bump the projector, otherwise damages or malfunctions may result.
• When carrying the projector, use a suitable carrying case.
• Do not transport the projector by courier or any other transport service in an unsuitable transport
case. This may cause damage to the projector. For information about transporting the projector by
courier or any other transport service, consult your dealer.
• Do not put the projector in a case before it is cooled enough.
—
ix —
DLP Projector — Owner’s Manual
Compliance
FCC Caution
Note: This equipment has been tested and found to comply with the limits for a Class A digital device,
pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against
harmful interference in a residential installation. This equipment generates, uses, and can radiate radio
frequency energy, and if not installed and used in accordance with the instructions, may cause harmful
interference to radio communications. However, there is no guarantee that interference will not occur in a
particular installation. If this equipment does cause harmful interference to radio or television reception,
which can be determined by turning the equipment off and on, the user is encouraged to try to correct the
interference by one or more of the following measures:
• Reorient or relocate the receiving antenna.
• Increase the separation between the equipment and receiver.
• Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.
• Consult the dealer or an experienced radio/TV technician for help.
Use of shielded cable is required to comply with class A limits in Subpart B of Part 15 of FCC Rules.
Do not make any changes or modifications to the equipment unless otherwise specified in the instructions.
If such changes or modifications should be made, you could be required to stop operation of the
equipment.
Model Number : EK-610U/EK611W/EK-612X
Trade Name : EIKI
Responsible party : EIKI International, Inc.
Address : 30251 Esperanza Rancho Santa Margarita CA 92688-2132
Telephone No. : 800-242-3454 (949-457-0200)
AC Power Cord Requirement
The AC Power Cord supplied with this projector meets the requirement for use in the country you
purchased it.
AC Power Cord for the United States and Canada:
AC Power Cord used in the United States and Canada is listed by the Underwriters Laboratories (UL) and
certified by the Canadian Standard Association (CSA).
AC Power Cord has a grounding-type AC line plug. This is a safety feature to be sure that the plug will fit
into the power outlet. Do not try to defeat this safety feature. Should you be unable to insert the plug into
the outlet, contact your electrician.
—
x—
Preface
Warning:
A plug with bared flexible cord is hazardous if engaged in a live socket outlet.
The Wires in this mains lead are coloured in accordance with the following code:
• Green-and-yellow ......... Earth
• Blue .............................. Neutral
• Brown ........................... Live
As the colours of the wires in the mains lead of this apparatus may not correspond with the coloured
markings identifying the terminals in your plug proceed as follows:
• The wire which is coloured green-and-yellow must be connected to the terminal in the plug which is
marked by the letter E or by the safety earth symbol or coloured green or green-and-yellow.
• The wire which is coloured blue must be connected to the terminal which is marked with the letter N or
coloured black.
• The wire which is coloured brown must be connected to the terminal which is marked with the letter L or
coloured red.
Warning:
This apparatus must be earthed.
Note:
The socket-outlet should be installed near the equipment and easily accessible.
—
xi —
DLP Projector — Owner’s Manual
Contents
Getting Started................................................................................................................. 1
Packing Checklist...................................................................................................................... 1
Views of Projector Parts.......................................................................................................... 2
Front-right View......................................................................................................................................2
Left View.................................................................................................................................................3
Rear View...............................................................................................................................................4
Built-in Keypad........................................................................................................................................5
Bottom View............................................................................................................................................6
Remote Control Parts . ............................................................................................................ 7
Remote Control Operating Range . .......................................................................................... 9
Projector and Remote Control Buttons .................................................................................. 9
Inserting the Remote Control Batteries ................................................................................... 9
Setup and Operation ..................................................................................................... 10
Installing the Projection Lens................................................................................................. 10
Starting and Shutting down the Projector.............................................................................. 12
Turn the Projector On...........................................................................................................................12
Turn the Projector Off...........................................................................................................................12
Adjusting the Projector Level. ............................................................................................... 13
Adjusting the Zoom, Focus, and Keystone................................................................................ 14
Adjusting the Projecting image’s Position................................................................................ 15
Projection Lens.....................................................................................................................................15
Optional Lenses and Projection Size....................................................................................................18
Other Optional Parts.............................................................................................................. 20
On-Screen Display (OSD) Menu Settings ................................................................ 21
OSD Menu Controls............................................................................................................... 21
Navigating the OSD..............................................................................................................................21
Setting the OSD Language...................................................................................................... 22
OSD Menu Overview................................................................................................................ 23
Picture Menu........................................................................................................................... 29
3D Display Menu..................................................................................................................................30
HSG Adjustment Menu.........................................................................................................................31
Advanced Menu....................................................................................................................................32
Output Menu............................................................................................................................ 33
Image Warping Menu...........................................................................................................................34
PIP/PBP Menu......................................................................................................................................35
—
xii —
Preface
Setup Menu.............................................................................................................................. 37
Lens Function Menu.............................................................................................................................38
Menu Preferences Menu......................................................................................................................39
Pin Menu...............................................................................................................................................40
Communications Menu.........................................................................................................................41
Option Menu. ........................................................................................................................... 42
Power Settings Menu............................................................................................................................43
Light Source Settings Menu..................................................................................................................44
Control Your Projector Using Web Browser......................................................................... 45
Wired LAN Terminal functionalities.......................................................................................................45
Supported External Devices.................................................................................................................45
LAN_RJ45............................................................................................................................................46
RS232 by Telnet Function.....................................................................................................................50
Maintenance and Security ......................................................................................... 53
Replacing the Projection Lamp. ............................................................................................... 53
Resetting the Lamp...............................................................................................................................55
Replacing the Projection Lens................................................................................................. 56
Replacing the Filter................................................................................................................. 58
Cleaning the Projector........................................................................................................... 59
Cleaning the Lens.................................................................................................................................59
Cleaning the Case................................................................................................................................59
Using the Kensington® Lock..................................................................................................... 60
Troubleshooting ........................................................................................................... 61
Common Problems and Solutions. ............................................................................................ 61
Tips for Troubleshooting......................................................................................................... 61
LED Error Messages. ............................................................................................................. 62
Image Problems........................................................................................................................ 63
Lamp Problems......................................................................................................................... 63
Remote Control Problems....................................................................................................... 64
Having the Projector Serviced................................................................................................ 64
HDMI Q & A............................................................................................................................. 65
Specifications .................................................................................................................. 66
Specifications........................................................................................................................... 66
Projection Distance vs. Projection Size.................................................................................. 67
Projection Distance and Size Table......................................................................................................67
Timing Mode Table.................................................................................................................... 70
Projector Dimensions.............................................................................................................. 72
—
xiii —
DLP Projector — Owner’s Manual
Regulatory Compliance .............................................................................................. 73
FCC Warning........................................................................................................................... 73
Caution.................................................................................................................................... 73
Canada..................................................................................................................................... 73
Safety Certifications............................................................................................................... 73
—
xiv —
DLP Projector — Owner’s Manual
Getting Started
Packing Checklist
Carefully unpack the projector and check that the following items are included:
DLP PROJECTOR
N
O
Quick Start Guide
EK-610
1
FF
O
4
2
7
5
3
8
fo
In
Accessories List
6
Au
0
to
9
Mo
de
So
urc
e
En
te
r
u
ma
Gam
Men
ight
Br
Co
How to install lens
Ex
.
nt
it
PI
ns
Le
-
P
H
ns
Le
V
s
on
st
cu
Fo
ey
K
r
e
on
st
ey
H
K
e
te
ut
Sh V Mu
(A
+
+
te)
V
Ho
om
Zo
-
y
t Ke
rn
tte
Pa
Turn on the projector
POWER CORD
VGA CABLE
REMOTE CONTROL
US Type*1 / Euro Type*1 /
China Type*1 for China
Safety Guide
Turn off the projector
QUICK START GUIDE
(WITH TWO AAA
BATTERIES)
Safety Guide
ṏ⑩ᷕ㚱㭺㚱⭛䈑峐ㆾ⃫䳈䘬⎵䦘⍲⏓濌濪堐
ὅ㌖ᷕ⚥㓧⹄搰⮡“䓝⫸ᾉ〗ṏ⑩㰉㝻㍏⇞䭉瀲 ≆㱽炱ᷢ㍏⇞␴ⅷ⮹䓝⫸ᾉ〗ṏ⑩⹇⺫⎶⮡䍗⠫忈ㆸ䘬㰉㝻炻Ὣ 徃
䓇ṏ␴撨ⓖỶ㰉㝻䓝⫸ᾉ〗ṏ⑩炻ᾅ㉌䍗⠫␴Ṣỻ‍⹟炻 ṭ㍸ὃ㚱ℛ㛔ṏ⑩⎗傥⏓㚱㚱㭺⍲㚱⭛䈑 峐⤪⎶烉
悐ẞ⎵䦘
‫ݹ‬ᵪᕅ᫾(䬍ᡆ䬍䭱ਸ䠁)
䮌ཤ
⚟⌑
⛩⚟ಘ
ᕩ⡷(ᘛࡺ⼧䬌)
仾ᡷ㓴Ԧ
㚱㭺㚱⭛䈑峐ㆾ⃫䳈
摭炷Pb˅ 㰆炷Hg˅ 擱炷Cd˅
X
X
X
X
X
X
O
O
X
O
O
O
O
O
O
O
O
O
瀟ẟ撔炷Cr(VI)˅
O
O
O
O
⣂㹜俼劗炷PBB˅
O
O
O
O
O
X
O
O
⑙ᓖᔰ‫ޣ‬
O
O
X
O
O
X
O
O
O
⣂㹜Ḵ劗慂炷PBDE˅
O
O
O
O
O
⚟⌑ⴆ‫؍‬ᣔᔰ‫ޣ‬
O
O
O
O
O
O
O
O
O
O
สᶯ㓴Ԧ
㔶㓯,㓯ᶀ
X
O
O
O
O
O
⭥Ⓚ㓯
X
O
O
O
O
O
⭥Ⓚᨂᓗ㓴Ԧ
䠁኎Ԧ(ᘛࡺ⼧䬌,䬌䪹ㅹ)
X
O
O
O
O
O
X
O
O
O
O
O
X
O
O
O
O
䚕᧗ಘ
˕烉堐䣢宍㚱㭺㚱⭛䈑峐⛐宍悐ẞ㇨㚱⛯峐㛸瀌ᷕ䘬⏓濌⛯⛐SJ/T11363-2006㞯Ⅾ奬⭂䘬旸濌天㯪ẍᶳˤ
O
ʹ烉堐䣢宍㚱㭺㚱⭛䈑峐军⮹⛐宍悐ẞ䘬㝸ᶨ⛯峐㛸瀌ᷕ䘬⏓濌崭↢SJ/T11363-2006㞯Ⅾ奬⭂䘬旸濌天㯪ˤ
⢯㲐烉戜Ḷ㫏䚇ᶶᷕ⚥⮡ḶRoHS䘬澵⎴奬⭂炻㛔㈽⼙㛢ṏ⑩䫎⎰㫏䚇RoHS㊯濶(䓝㮼ˣ䓝⫸学⢯ᷕ旸⇞ἧ䓐㝸ṃ㚱⭛䈑峐㊯濶), 㛔
堐ᷕ㞯㚱"X"䘬㇨㚱悐ẞ⛯ᷢ㫏䚇ROHS㊯濶㇨⃩孠瀃⢾䘬悐ẞˤ
1
2
SAFETY GUIDE
WARRANTY CARD
RoHS CARD
QC PASS CARD
for USA
for China
for China
WARRANTY CARD
for China
Contact your dealer immediately if any items are missing, appear damaged, or if the unit does not work. It
is recommend that you keep the original packing material should you ever need to return the equipment
for warranty service.
Note:
• Avoid using the projector in dusty environments.
—
1—
DLP Projector — Owner’s Manual
Views of Projector Parts
Front-right View
3
2
1
4
9
Item
8
7 6
Label
5
Description
See page
1
Projection Lens
Allows automated lens control and adjustment: vertical and
horizontal offsets, zoom and focus.
10
2
Front IR Sensor
9
3
Top IR Sensor
Receives signals from the IR remote. Keep the signal path to
the sensor unobstructed for uninterrupted communication with
the projector.
4
Lamp Door
Use the lamp door to access the lamp module.
53
5
Power LED
Indicate the power status.
62
6
Lamp LED
Indicate the lamp status.
62
7
Temp LED
Indicate the temperature status.
62
8
Filter LED
Indicate the filter status.
62
9
Shutter LED
Indicate the shutter status.
—
2—
-
DLP Projector — Owner’s Manual
Left View
1
2
3
Item
Label
Description
See page
1
Cooling Air Vents Keep these vents unobstructed to prevent the projector from
(Intake)
overheating.
-
2
Built-in Keypad
Control the projector.
5
3
Adjustable Feet
Raise or lower the feet to level the projector.
13
Important:
Ventilation openings on the projector allow for good air circulation, which keeps the projector lamp
cool. Do not obstruct any of the ventilation openings.
—
3—
DLP Projector — Owner’s Manual
Rear View
1
2
14
15
Item
3
Label
4
13 12
5
11
6
7
8
10
9
Description
See page
1
LAN
Connect a LAN cable from Ethernet.
2
USB
Connect the WIFI dongle.
45
3
RS-232C
Connect RS-232 serial port cable for remote control.
4
HDBaseT
Connect a RJ45 Cat5/Cat6 Ethernet cable to input
uncompressed high-definition video signals.
-
5
Component
Connect to YPbPr output signal with RCA type input terminal.
-
6
Video IN
Connect the COMPOSITE cable from a video device.
-
7
Remote IN
Connect to the remote control wired terminal for serial control
projector.
-
8
DVI-D
Connect to DVI source.
-
9
AC Input
Connect to the supplied power adapter.
10
Security Bar
For extended security, attach an anti-theft chain or wire to the
security bar on the projector.
-
11
VGA IN
Connect the VGA cable from a computer or component device.
-
12
HDMI
Connect the HDMI cable from a HDMI device.
13
Kensington Lock
Use to secure the projector to countertops, tables, etc.
14
Service
Service only.
15
Cooling Air Vents Keep these vents unobstructed to prevent the projector from
overheating.
(Exhaust)
50
12
60
-
Note:
• To use this feature, you must plug in the connector before turn on/off the projector.
• Do not use this jack for anything other than intended use.
Warning:
As a safety precaution, disconnect all power to the projector and connecting devices before making
connections.
—
4—
DLP Projector — Owner’s Manual
Important:
Ventilation openings on the projector allow for good air circulation, which keeps the projector lamp
cool. Do not obstruct any of the ventilation openings.
Built-in Keypad
5
Item
6
4
7
3
8
2
9
1
10
Label
Description
See page
1
Zoom
Adjust zoom.
14
2
Focus
Adjust focus.
14
3
Lens
Adjust the lens vertical or horizontal offset setting.
4
Power
Turn the projector on or off.
5
Arrow keys
• Adjust a setting UP or DOWN.
• Navigate within a menu.
-
6
Enter
• Select a highlighted menu item.
• Change or accept a value.
21
7
Menu
Display menus.
21
8
Exit
Return to previous level or exit menus if at top level.
21
9
Shutter
Display or blank the video image.
10
Source
Select an input for the main or PIP/PBP image.
—
5—
15-17
12
35
DLP Projector — Owner’s Manual
Bottom View
1
1
125.4mm
95.4mm
160mm
2
216.2mm
95mm
130.8mm
2
2
2
105.8mm
241.2mm
1
Item
Label
Description
1
Adjustable Feet
Raise or lower the feet to level the projector.
2
Ceiling support
holes
Contact your dealer for information on mounting the projector on
a ceiling.
See page
13
viii-ix
Note:
• When installing, ensure that you use only UL Listed ceiling mounts.
• For ceiling installations, use approved mounting hardware and M6 x 4 screws with a maximum
screw depth of 10 mm (0.39 inch).
• The construction of the ceiling mount must be of a suitable shape and strength. The ceiling mount
load capacity must exceed the weight of the installed equipment, and as an additional precaution
be capable of withstanding three times the weight of the equipment (not less than 71.4 kg) over a
period of 60 seconds.
—
6—
DLP Projector — Owner’s Manual
Remote Control Parts
ON
OFF
1
16
1
2
3
4
5
6
7
8
9
3
Info
0
Mode
17
4
Auto
Source
18
Exit
19
2
5
Enter
6
7
8
Menu
Gamma Bright
Cont.
PIP
9
10
20
21
Lens H
Focus
22
Zoom
23
Pattern
24
11
Lens V
12
Keystone H
13
Keystone V
14
Shutter
(AV Mute)
Hot Key
15
Important:
1. Avoid using the projector with bright fluorescent lighting turned on. Certain high-frequency
fluorescent lights can disrupt remote control operation.
2. Be sure nothing obstructs the path between the remote control and the projector. If the path
between the remote control and the projector is obstructed, you can bounce the signal off certain
reflective surfaces such as projector screens.
3. The buttons and keys on the projector have the same functions as the corresponding buttons on the
remote control. This owner’s manual describes the functions based on the remote control.
Note:
Complies with FDA performance standards for laser products except for deviations pursuant to
Laser Notice No. 50, dated June 24, 2007.
—
7—
DLP Projector — Owner’s Manual
Item
Label
Description
See page
1
Power on
Turn projector ON.
12
2
Number Keys
Enter a number (such as PIN code) or source hotkey.
Source Hotkey Key:
1: VGA
2: HDMI
3: Component
4: HDBaseT
5: Video
6: DVI-D
-
3
Info
Display source image information.
-
4
Auto
Automatically optimize image.
-
5
Enter
• Select a highlighted menu item.
• Change or accept a value.
21
6
Arrow Keys
• Adjust a setting UP or DOWN.
• Navigate within a menu.
21
7
Menu
Display menus.
21
8
Gamma
Adjust mid-range levels.
-
9
Bright
Adjust amount of light in the image.
-
10
Lens H
Adjust the position of the image horizontally.
-
11
Lens V
Adjust the position of the image vertically.
12
Keystone H
Adjust the horizontal keystone.
14
-
13
Keystone V
Adjust the vertical keystone.
14
14
Shutter
(AV Mute)
Display or blank the video image.
15
Hot Key
Select your preset keys quickly.
42
16
OFF
Turn projector OFF.
12
17
Mode
Select the preset display mode.
18
Source
Select an input for the main or PIP/PBP image.
35
19
Exit
Return to previous level or exit menus if at top level.
21
20
PIP
Turn PIP/PBP ON/OFF.
35
21
Cont.
Adjust difference between dark and light.
22
Focus
Adjust focus to improve image clarity as desired.
14
23
Zoom
Adjust zoom to achieve a desired image size.
14
24
Pattern
Display a test pattern.
-
-
-
-
Caution:
Use of controls, adjustments or performance of procedures other than those specified herein may
result in hazardous laser light exposure.
—
8—
DLP Projector — Owner’s Manual
Remote Control Operating Range
The remote control uses infrared transmission to control the projector. It is not necessary to point the
remote directly at the projector. Provided you are not holding the remote perpendicular to the sides or
the rear of the projector, the remote will function well within a radius of about 7 meters (23 feet) and 15
degrees above or below the projector level. If the projector does not respond to the remote control, move
a little closer.
Projector and Remote Control Buttons
The projector can be operated using the remote control or the buttons on the top of the projector. All
operations can be carried out with the remote control; however, the buttons on the projector are limited in
use.
Inserting the Remote Control Batteries
1.Remove the battery compartment cover as shown in the
illustration.
2.Insert the batteries with correct polarity (+/-) as shown inside
the battery compartment.
3.Replace the cover.
Caution:
• Only use AAA batteries (Alkaline batteries are recommended).
• Dispose of used batteries according to local ordinance regulations.
• Remove the batteries when not using the projector for prolonged periods.
—
9—
DLP Projector — Owner’s Manual
Setup and Operation
Installing the Projection Lens
Before setting up the projector, install the projection lens on the projector.
Important:
• Before installation, check where the projector is used and prepare a suitable lens.
• For details, contact the sales dealer where you purchased the projector.
1.Turn the projector off. Allow the projector to cool down into standby mode.
2.Rotate the lens ring counter-clockwise and then
remove it from the projector.
3.Rotate the lens cover counter-clockwise and then
remove it from the projector.
4.With the label “TOP” on the lens assembly facing up,
install the assembly into the lens mount.
—
10 —
DLP Projector — Owner’s Manual
5.While pulling the rejection pin, rotate the lens clockwise
to lock the lens in place. Then release the rejection pin.
6.Replace the lens ring.
—
11 —
DLP Projector — Owner’s Manual
Starting and Shutting down the Projector
Turn the Projector On
1.Connect the power cord to the projector. Then connect the other end to a wall outlet.
The Power button on the built in keypad is illuminated.
Important:
Make sure that the Power switch is in the ON position.
2.Turn on the connected devices.
3.Turn on the projector by pressing “
” on the remote control
or press “ ” on the built-in keypad. The Power LED is
Blue with steady light.
The projector splash screen displays and connected
devices are detected.
4.If more than one input device is connected, press the Source key on the remote control to select an
input source (VGA, HDMI, Component, HDBaseT, Composite, or DVI).
5.The projector detects the source you selected and displays the image.
Note:
The first time the projector is used, the preferred language may be selected from the main menu after
the startup screen is displayed.
Turn the Projector Off
1.Press “
” on the built-in keypad or press “ ” on the remote control to turn off the projector. A warning
message will appear on the displayed image.
2.Press “
” on the built-in keypad or press “ ” on the remote control again to confirm your selection. If
you do not press “ ” or “ ” again, the warning message will disappear after 3 seconds.
Caution:
• Do not unplug the power cord until all of fans are stop–indicating the projector has cooled down.
—
12 —
DLP Projector — Owner’s Manual
Adjusting the Projector Level
Take note of the following when setting up the projector:
• The projector table or stand should be level and sturdy.
• Position the projector so that it is perpendicular to the screen.
• Ensure the cables are in a safe location. You could trip over them.
A
B
1.To raise the level of the projector, lift the projector
A
.
2.Locate the adjustable foot you wish to modify on the underside of the projector.
3.Rotate the adjustable foot clockwise to raise the projector or counter-clockwise to lower it. Repeat with
the remaining feet as necessary
B
.
—
13 —
DLP Projector — Owner’s Manual
Adjusting the Zoom, Focus, and Keystone
1.Use the Zoom button to resize the projected
image and screen size
B
.
Lens H
Focus
A
Lens V
2.Use the Focus button to sharpen the
projected image
A
Keystone H
.
Zoom
Keystone V
Shutter
(AV Mute)
Hot Key
B
Pattern
3.Use the Keystone H buttons (on the remote control) to adjust the keystone
horizontally and make a squarer image. Use the Keystone V buttons (on the
remote control) to adjust keystone vertically and make a squarer image.
Lens H
Focus
Lens V
Keystone H
Zoom
Keystone V
Shutter
(AV Mute)
—
14 —
Hot Key
Pattern
DLP Projector — Owner’s Manual
Adjusting the Projecting image’s Position
Projection Lens
The complete projection lens series as below table.
Item
Lens Type
Projection
Lens
A15
(AH-A22010)
A01
(AH-A22020)
A02
(AH-A22030)
A03
(AH-A21010)
A13
(AH-A23010)
Focal Length
(f)
11.11-14.06
14.03-17.96
18.07-22.59
22.56-42.87
42.60-80.90
F number
2.30-2.53
2.30-2.57
2.00-2.32
2.30-3.39
2.30-2.74
Focus spec
(MTF)
67 lp/mm
67 lp/mm
47 lp/mm
67 lp/mm
67 lp/mm
Zoom Range
(Ratio)
1.26X
1.28X
1.25X
1.9X
1.9X
Zoom & Focus
Adjustment
Motorized
Throw Ratio
(XGA)
0.78-0.99
0.99-1.26
1.26-1.58
1.58-3.00
3.00-5.70
Throw
Distance (XGA)
0.79-6.03m
1.01~7.68m
1.28~9.63m
1.61~18.29m
3.05-34.75m
Projection
Image Size
50~300”
—
15 —
DLP Projector — Owner’s Manual
Horizontal: ±30%
Vertical: ±100%
Projection Lens: A01(AH-A22020), A03(AH-A21010), A13(AH-A23010)
Motorized Lens
Shift
(Lens shift range
based on 1/2
screen width and
height)
Platform
H
V
rH
rV
EK-612X/
0.7”XGA
30%
100%
0%
10%
EK-611W/
0.65” WXGA
30%
100%
30%
100%
EK-610U/
0.67” WUXGA
30%
100%
30%
100%
Projection Lens: A02(AH-A22030)
Platform
H
V
rH
rV
EK-612X/
0.7”XGA
30%
100%
0%
10%
EK-611W/
0.65” WXGA
30%
100%
15%
70%
EK-610U/
0.67” WUXGA
30%
100%
5%
50%
Projection Lens: A15(AH-A22010)
Platform
H
V
rH
rV
EK-612X/
0.7”XGA
30%
100%
0%
0%
EK-611W/
0.65” WXGA
30%
100%
14%
70%
EK-610U/
0.67” WUXGA
30%
100%
2%
50%
—
16 —
DLP Projector — Owner’s Manual
A01(AH-A22020)/ A03(AH-A21010)/ A13(AH-A23010) lens shift range:
Lens shift range
Motorized Lens
Shift
A02(AH-A22030)/ A15(AH-A22010) lens shift range:
(Lens shift range
based on 1/2
screen width and
height)
Darker
Lens shift range
Lens shift accuracy: 0.5 pixel per step
When the lens is shifted beyond the described range of operation, the screen edges
may become darker or the images may become out of focus.
—
17 —
DLP Projector — Owner’s Manual
Optional Lenses and Projection Size
Model Name
EK-612X/ XGA (4:3)
DMD
0.70”
A15
(AH-A22010)
A01
(AH-A22020)
A02
(AH-A22030)
A03
(AH-A21010)
A13
(AH-A23010)
Throw Ratio
0.78-0.99
0.99-1.26
1.26-1.58
1.58-3.00
3.00-5.70
Zoom Ratio
1.26X
1.28X
1.25X
1.9X
1.9X
0.79-6.03m
1.01~7.68m
1.28~9.63m
1.61~18.29m
3.05~34.75m
Projection Lens
Throw Distance
Projection screen size
Projection distance (m)
Throw Ratio
0.78
0.99
0.99
1.26
1.26
1.58
1.58
3.00
3.00
5.70
Diagonal Height Width
(inch)
(m)
(m)
Min
(m)
Max
(m)
Min
(m)
Max
(m)
Min
(m)
Max
(m)
Min
(m)
Max
(m)
Min
(m)
Max
(m)
50
0.76
1.02
0.79
1.01
1.01
1.28
1.28
1.61
1.61
3.05
3.05
5.79
60
0.91
1.22
0.95
1.21
1.21
1.54
1.54
1.93
1.93
3.66
3.66
6.95
70
1.07
1.42
1.11
1.41
1.41
1.79
1.79
2.25
2.25
4.27
4.27
8.11
80
1.22
1.63
1.27
1.61
1.61
2.05
2.05
2.57
2.57
4.88
4.88
9.27
90
1.37
1.83
1.43
1.81
1.81
2.30
2.30
2.89
2.89
5.49
5.49
10.42
100
1.52
2.03
1.58
2.01
2.01
2.56
2.56
3.21
3.21
6.10
6.10
11.58
110
1.68
2.24
1.74
2.21
2.21
2.82
2.82
3.53
3.53
6.71
6.71
12.74
120
1.83
2.44
1.90
2.41
2.41
3.07
3.07
3.85
3.85
7.32
7.32
13.90
130
1.98
2.64
2.06
2.62
2.62
3.33
3.33
4.17
4.17
7.92
7.92
15.06
140
2.13
2.84
2.22
2.82
2.82
3.58
3.58
4.49
4.49
8.53
8.53
16.22
150
2.29
3.05
2.38
3.02
3.02
3.84
3.84
4.82
4.82
9.14
9.14
17.37
160
2.44
3.25
2.54
3.22
3.22
4.10
4.10
5.14
5.14
9.75
9.75
18.53
170
2.59
3.45
2.69
3.42
3.42
4.35
4.35
5.46
5.46
10.36 10.36 19.69
180
2.74
3.66
2.85
3.62
3.62
4.61
4.61
5.78
5.78
10.97 10.97 20.85
190
2.90
3.86
3.01
3.82
3.82
4.86
4.86
6.10
6.10
11.58
200
3.05
4.06
3.17
4.02
4.02
5.12
5.12
6.42
6.42
12.19 12.19 23.16
250
3.81
5.08
3.96
5.03
5.03
6.40
6.40
8.03
8.03
15.24 15.24 28.96
300
4.57
6.10
4.75
6.03
6.04
7.68
7.68
9.63
9.63
18.29 18.29 34.75
—
18 —
11.58
22.01
DLP Projector — Owner’s Manual
Model Name
EK-611W/ WXGA (16:10)
DMD
0.65"
A15
(AH-A22010)
A01
(AH-A22020)
A02
(AH-A22030)
A03
(AH-A21010)
A13
(AH-A23010)
Throw Ratio
0.79-1.00
1.00-1.28
1.28-1.61
1.60-3.07
3.04-5.78
Zoom Ratio
1.26X
1.28X
1.25X
1.9X
1.9X
0.85~6.46m
1.08~8.27m
1.38~10.40m
1.73~19.83m
3.28~37.34m
Projection Lens
Throw Distance
Projection screen size
Projection distance (m)
Throw Ratio
0.79
1.00
1.00
1.28
1.28
1.61
1.60
3.07
3.04
5.78
Diagonal Height Width
(inch)
(m)
(m)
Min
(m)
Max
(m)
Min
(m)
Max
( m)
Min
(m)
Max
(m)
Min
(m)
Max
(m)
Min
(m)
Max
( m)
50
0.67
1.08
0.85
1.08
1.08
1.38
1.38
1.74
1.73
3.32
3.28
6.24
60
0.81
1.29
1.02
1.29
1.29
1.65
1.65
2.08
2.06
3.96
3.92
7.46
70
0.94
1.51
1.19
1.51
1.51
1.93
1.93
2.43
2.42
4.64
4.59
8.73
80
1.08
1.72
1.36
1.72
1.72
2.20
2.20
2.77
2.75
5.28
5.23
9.94
90
1.21
1.94
1.53
1.94
1.94
2.48
2.48
3.12
3.10
5.96
5.90
11.21
100
1.35
2.15
1.70
2.15
2.15
2.75
2.75
3.46
3.44
6.60
6.54
12.43
110
1.48
2.37
1.87
2.37
2.37
3.03
3.03
3.82
3.79
7.28
7.20
13.70
120
1.62
2.58
2.04
2.58
2.58
3.30
3.30
4.15
4.13
7.92
7.84
14.91
130
1.75
2.8
2.21
2.80
3.02
3.58
3.58
4.51
4.48
8.60
8.51
16.18
140
1.88
3.02
2.39
3.02
3.02
3.87
3.87
4.86
4.83
9.27
9.18
17.46
150
2.02
3.23
2.55
3.23
3.23
4.13
4.13
5.20
5.17
9.92
9.82
18.67
160
2.15
3.45
2.73
3.45
3.45
4.42
4.42
5.55
5.52
10.59 10.49 19.94
170
2.29
3.66
2.89
3.66
3.66
4.68
4.68
5.89
5.86
11.24
11.13
21.15
180
2.42
3.88
3.07
3.88
3.88
4.97
4.97
6.25
6.21
11.91
11.80
22.43
190
2.56
4.09
3.23
4.09
4.09
5.24
5.24
6.58
6.54
12.56 12.43 23.64
200
2.69
4.31
3.40
4.31
4.31
5.52
5.52
6.94
6.90
13.23 13.10 24.91
250
3.37
5.38
4.25
5.38
5.38
6.89
6.89
8.66
8.61
16.52 16.36 31.10
300
4.04
6.46
5.10
6.46
6.46
8.27
8.27
10.40 10.34 19.83 19.64 37.34
—
19 —
DLP Projector — Owner’s Manual
Model Name
EK-610U/ WUXGA (16:10)
DMD
0.67"
A15
(AH-A22010)
A01
(AH-A22020)
A02
(AH-A22030)
A03
(AH-A21010)
A13
(AH-A23010)
Throw Ratio
0.75-0.95
0.95-1.22
1.22-1.53
1.53-2.92
2.90-5.50
Zoom Ratio
1.26X
1.28X
1.25X
1.9X
1.9X
0.81-6.13m
1.02~7.88m
1.31~9.89m
1.64~18.87m
3.12~35.54m
Projection Lens
Throw Distance
Projection screen size
Projection distance (m)
Throw Ratio
0.75
0.95
0.95
1.22
1.22
1.53
1.53
2.92
2.90
5.50
Diagonal Height Width
(inch)
(m)
(m)
Min
( m)
Max
(m)
Min
(m)
Max
(m)
Min
(m)
Max
(m)
Min
(m)
Max
( m)
Min
(m)
Max
(m)
50
0.67
1.08
0.81
1.03
1.02
1.31
1.31
1.65
1.65
3.14
3.13
5.94
60
0.81
1.29
0.97
1.23
1.23
1.58
1.58
1.98
1.98
3.77
3.74
7.10
70
0.94
1.51
1.13
1.43
1.43
1.84
1.84
2.31
2.31
4.40
4.38
8.31
80
1.08
1.72
1.29
1.63
1.64
2.10
2.10
2.64
2.64
5.03
4.99
9.46
90
1.21
1.94
1.46
1.84
1.84
2.36
2.36
2.97
2.97
5.66
5.63
10.67
100
1.35
2.15
1.61
2.04
2.05
2.63
2.63
3.3
3.3
6.29
6.24
11.83
110
1.48
2.37
1.78
2.25
2.25
2.89
2.89
3.62
3.62
6.92
6.87
13.04
120
1.62
2.58
1.94
2.45
2.46
3.15
3.15
3.95
3.95
7.55
7.48
14.19
130
1.75
2.8
2.10
2.66
2.66
3.42
3.42
4.28
4.28
8.18
8.12
15.40
140
1.88
3.02
2.27
2.87
2.86
3.68
3.68
4.61
4.61
8.80
8.76
16.61
150
2.02
3.23
2.42
3.07
3.07
3.94
3.94
4.94
4.94
9.43
9.37
17.77
160
2.15
3.45
2.59
3.28
3.27
4.20
4.20
5.27
5.27
10.06 10.01 18.98
170
2.29
3.66
2.75
3.48
3.48
4.47
4.47
5.60
5.60
10.69 10.61 20.13
180
2.42
3.88
2.91
3.69
3.68
4.73
4.73
5.93
5.93
11.32
11.25
21.34
190
2.56
4.09
3.07
3.89
3.89
4.99
4.99
6.26
6.26
11.95
11.86
22.50
200
2.69
4.31
3.23
4.09
4.09
5.25
5.25
6.59
6.59
12.58 12.50 23.71
250
3.37
5.38
4.04
5.11
5.11
6.57
6.57
8.24
8.24
15.72 15.60 29.59
300
4.04
6.46
4.85
6.13
6.14
7.88
7.88
9.89
9.89
18.87 18.73 35.53
Other Optional Parts
Part Number
Item
AH-B34020
Wifi Dongle
AH-B34030
Wired Remote Cable
—
20 —
DLP Projector — Owner’s Manual
On-Screen Display (OSD) Menu Settings
OSD Menu Controls
The projector has an OSD that lets you make image adjustments and change various settings.
Navigating the OSD
You can use the remote control cursor buttons or the projector keypad to navigate and make changes to
the OSD.
A
B
Auto
Source
C
Exit
D
Enter
Menu
1.To enter the OSD, press the Menu
button
A
.
PICTURE
2.Use the arrow keys (pqtu)
to navigate within the menu and
adjust a setting up or down B .
3.Press the Enter button to enter the
submenu or confirm the selection/
setting C .
4.Press the Exit button to return to
OUTPUT
SETUP
OPTION
PICTURE
Display Mode
Presentation
Brightness
50
Contrast
50
Sharpness
Color
50
Tint
50
Phase
50
Frequency
50
Horz Position
50
Vert Position
50
the previous menu or exit menus
if at top level D .
Caution:
Depending on the video source, not all items in the OSD are available. Items that are not available
cannot be accessed and are grayed out.
—
2
21 —
DLP Projector — Owner’s Manual
Setting the OSD Language
Set the OSD language to your preference before continuing.
1.Press the Menu button.
PICTURE
OUTPUT
SETUP
OPTION
PICTURE
Display Mode
Presentation
Brightness
50
Contrast
50
Sharpness
2
Color
50
Tint
50
Phase
50
Frequency
50
Horz Position
50
Vert Position
50
2.Use the arrow keys (pq) to select SETUP and press the Enter button to enter the SETUP menu.
SETUP
PICTURE
Language
English
Ceiling Mount
OUTPUT
Auto
Rear Projection
Off
Lens Function
Menu Preferences
SETUP
Pin
Communications
OPTION
3.Use the arrow keys (pq) to select Language and press the Enter
button to enter its submenu.
4.Use the arrow keys (pqtu) to select the desired language and
press the Enter button to confirm.
5.Press the Exit button several times to exit the menu.
—
22 —
Language
DLP Projector — Owner’s Manual
OSD Menu Overview
Use the following illustration to quickly find a setting or determine the range for a setting.
Main Menu Sub Menu / Settings
Default
Presentation
Video
Bright
Display Mode
2D High Speed
By source set
3D
User
Save to User
Brightness
0 ~ 100
50
Contrast
0 ~ 100
50
Sharpness
0~4
2
Color
0 ~ 100
50
Tint
0 ~ 100
50
Phase
0 ~ 100
50
Frequency
0 ~ 100
50
Horz Position
0 ~ 100
50
Vert Position
0 ~ 100
50
Auto Image
3D Display
Off
3D Enable
On
3D Invert
Off
HSG Enable
PICTURE
On
Off
Auto Test Pattern
On
Red H.
HSG Adjustment
0-254
Off
Off
127
Red S.
0-254
127
Red G.
0-254
127
Green H.
0-254
127
Green S.
0-254
127
Green G.
0-254
127
Blue H.
0-254
127
Blue S.
0-254
127
Blue G.
0-254
127
Cyan H.
0-254
127
Cyan S.
0-254
127
Cyan G.
0-254
127
Magenta H.
0-254
127
Magenta S.
0-254
127
Magenta G.
0-254
127
Yellow H.
0-254
127
Yellow S.
0-254
127
Yellow G.
0-254
127
White R Gain
0-254
127
—
23 —
DLP Projector — Owner’s Manual
Main Menu Sub Menu / Settings
HSG Adjustment
Default
White G Gain
0-254
127
White B Gain
0-254
127
Yes
Reset to Default
No
White Peaking
0 - 100
By source set
Film
Video
Gamma
By source set
Graphics
Standard
Warm
Color Temperature
Medium
Cool
RGB
RGB709
PICTURE
Color Space
REC601
Auto
RGB Video
Advanced
Auto
Color Settings
Red Gain
0 ~ 100
50
Green Gain
0 ~ 100
50
Blue Gain
0 ~ 100
50
Red Offset
0 ~ 100
50
Green Offset
0 ~ 100
50
Blue Offset
0 ~ 100
50
Reset RGB Gain/
Offset
Off
Film Mode
On
Off
DynamicBlack™
On
Off
Auto
Aspect Ratio
4:3
Auto
16:10/16:9
Native
Overscan
OUTPUT
Off
By source set
On
H Digital Zoom
50% ~ 400%
100
V Digital Zoom
50% ~ 400%
100
H Digital Shift
0 ~ 100
50
V Digital Shift
0 ~ 100
50
Image Warping
H Keystone
0 ~ 40
20
V Keystone
0 ~ 40
20
H Pincushion
0 ~ 100
50
V Pincushion
0 ~ 100
50
—
24 —
DLP Projector — Owner’s Manual
Main Menu Sub Menu / Settings
Default
Off
PIP/PBP Enable
On
Off
VGA
HDMI
Component
Main Source
HDBaseT
VGA
CVBS
DVI-D
VGA
HDMI
Component
Sub Source
OUTPUT
HDBaseT
CVBS
PIP/PBP
DVI-D
Swap
Small
Size
Medium
Large
Large
PBP, Main Left
PBP, Main Top
PBP, Main Right
PBP, Main Bottom
Layout
PIP-Bottom Right
PIP-Bottom Left
PIP-Top Left
PIP-Top Right
English
French
Spanish
German
Language
Italian
English
Russian
Chinese Simplified
SETUP
Japanese
Korean
Off
Ceiling Mount
On
Auto
Auto
Rear Projection
Off
Off
On
—
25 —
DLP Projector — Owner’s Manual
Main Menu Sub Menu / Settings
Default
Focus
Zoom
Lens Shift
Lens Function
No
Lens Calibration
Yes
No
Lens Lock
Menu
Preferences
Pin
Yes
Menu Transparency
0~9
0
Off
Show Messages
On
On
Off
Pin Protect
Off
PIN default : 12345
On
Change PIN
DHCP
Off
On
IP Address
LAN
Subnet Mask
Default Gateway
MAC Address
SETUP
Apply
Enable
By set
Start IP
End IP
WLAN
Subnet Mask
Default Gateway
Communications
MAC Address
SSID
Projector Name
Restart Network
Network
Network Factory
Reset
By set
9600
14400
19200
Serial Port Baud Rate
38400
19200
57600
115200
Projector ID
0-9
—
26 —
0
DLP Projector — Owner’s Manual
Main Menu Sub Menu / Settings
Auto Source
High Altitude
Default
Off
On
On
Off
Off
On
Off
Grid
Red
Green
Test Pattern
Blue
Off
Yellow
Magenta
Cyan
White
Black
Logo
Background Color
Blue
Logo
Black
White
Blank Screen
Hot-Key settings
Aspect Ratio
Blank Screen
Freeze Screen
Overscan
OPTION
0.5W mode
Standby Power Mode
Communicationmode
Off
Direct Power On
On
0.5W mode
Off
No
5 Mins
10 Mins
Power Settings
Auto Standby
15 Mins
20 Mins
20 Mins
25 Mins
30 Mins
No
2 Hours
Auto Sleep
4 Hours
No
6 Hours
Constant Power
Light Source Mode
LightSourceSettings
Eco Mode
Constant Power Settings
0 - 10
Total Projector Hours
Lamp Hours
Reset Lamp Hours
Information
Model Name
—
27 —
Constant Power
10
DLP Projector — Owner’s Manual
Main Menu Sub Menu / Settings
Default
Serial Number
Native Resolution
Firmware
Main Source
- Resolution
- Signal Format
- Pixel Clock
- Horz Refresh
- Vert Refresh
Information
OPTION
Sub Source
- Resolution
- Signal Format
- Pixel Clock
- Horz Refresh
- Vert Refresh
Light Source Mode
Total Projector Hours
Standby Power Mode
IP Address
DHCP
Factory Reset
Yes/No (Dialog box)
Service
—
28 —
DLP Projector — Owner’s Manual
Picture Menu
Press the Menu button to open the OSD menu. Press the arrow keys (pq) to select PICTURE and press
the Enter button to enter the PICTURE menu. Press the arrow keys (pq) to select the menu option
and press the Enter button to enter its submenu. Press the arrow keys (pqtu) to select or adjust the
desired settings and press the Enter button to confirm.
PICTURE
OUTPUT
SETUP
OPTION
PICTURE
Display Mode
Presentation
Brightness
50
Contrast
50
Sharpness
2
Color
50
Tint
50
Phase
50
Frequency
50
Horz Position
50
Vert Position
50
Item
Description
Display Mode
Optimize the projector for displaying images under certain conditions, such
as Presentation, Video, Bright, 2D High Speed, 3D, and user-definable
preset.
Brightness
Adjust the intensity of the image.
Contrast
Adjust the degree of difference between the lightest and darkest parts of
the picture and change the amount of black and white in the image.
Sharpness
Select the edge clarity of the image.
Color
Adjust a video image from black and white to fully saturated color. The color
setting applies to video sources only.
Tint
Adjust the red-green color balance in the image of video images. The tint
setting applies to video sources only.
Phase
Analog signals only. Adjust pixel phase when the image still shows shimmer
or noise after pixel tracking is optimized. Pixel phase can adjust the phase
of the pixel-sampling clock relative to the incoming signal.
Frequency
Analog signals only. Steady flickering or several soft vertical stripes or
bands across the entire image indicates poor frequency. Proper frequency
ensures that the image quality is consistent across the screen, the aspect
ratio is maintained, and that the pixel phase can be optimized.
Horz Position
Move the image right or left within the area of available pixels.
Vert Position
Move the image up or down within the area of available pixels.
Auto Image
Force the projector to reacquire and lock to the input signal. This is useful
when signal quality is marginal.
3D Display
Configure the color management settings. See “3D Display Menu” on page
30.
HSG Adjustment
Configure the color management settings. See “HSG Adjustment Menu” on
page 31.
Advanced
Configure the advanced image settings. See “Advanced Menu” on page
32.
—
29 —
DLP Projector — Owner’s Manual
3D Display Menu
Press the Menu button to open the OSD menu. Press the arrow keys (pq) to select PICTURE and press
the Enter button to enter the PICTURE menu. Press the arrow keys (pq) to select 3D Display and press
the Enter button to enter the 3D Display menu. Press the arrow keys (pq) to select the menu option
and press the Enter button to enter its submenu. Press the arrow keys (pqtu) to select or adjust the
desired settings and press the Enter button to confirm.
PICTURE
3D Display
3D Enable
Off
3D Invert
OUTPUT
SETUP
OPTION
Item
Description
3D Enable
Set 3D format. Supports Mandatory 3D formats and frame sequential
3D@120Hz.
3D Invert
Invert 3D sync signal for the application of using single projector.
—
30 —
DLP Projector — Owner’s Manual
HSG Adjustment Menu
Press the Menu button to open the OSD menu. Press the arrow keys (pq) to select PICTURE and press
the Enter button to enter the PICTURE menu. Press the arrow keys (pq) to select HSG Adjustment
and press the Enter button to enter the HSG Adjustment menu. Press the arrow keys (pq) to select the
menu option and press the Enter button to enter its submenu. Press the arrow keys (pqtu) to select or
adjust the desired settings and press the Enter button to confirm.
PICTURE
OUTPUT
SETUP
OPTION
HSG Adjustment
HSG Enable
Off
Auto Test Pattern
Off
Red H.
127
Red S.
127
Red G.
127
Green H.
127
Green S.
127
Green G.
127
Blue H.
127
Blue S.
127
Item
Description
HSG Enable
Enable/Disable the HSG adjustment function.
Auto Test Pattern
Set to “On” to enable displaying a test pattern for the target color or set to
“Off” to disable the auto test pattern.
Red H. / Green H. /
Blue H. / Cyan H. /
Magenta H. / Yellow H.
Adjust the hue of the red, green, blue, cyan, magenta, or yellow channel of
the image.
Red S./ Green S. /
Blue S./ Cyan S. /
Magenta S. / Yellow S.
Adjust the saturation of the red, green, blue, cyan, magenta, or yellow
channel of the image.
Red G. / Green G. /
Blue G. / Cyan G. /
Magenta G. / Yellow G.
Adjust the gain of the red, green, blue, cyan, magenta, or yellow channel of
the image.
White R Gain /
White G Gain /
White B Gain
Adjust the white balance of the red, green, or blue channel of the image.
Reset to Default
Reset the hue, saturation, gain, and white balance adjustments to the
factory defaults.
—
31 —
DLP Projector — Owner’s Manual
Advanced Menu
Press the Menu button to open the OSD menu. Press the arrow keys (pq) to select PICTURE and press
the Enter button to enter the PICTURE menu. Press the arrow keys (pq) to select Advanced and press
the Enter button to enter the Advanced menu. Press the arrow keys (pq) to select the menu option
and press the Enter button to enter its submenu. Press the arrow keys (pqtu) to select or adjust the
desired settings and press the Enter button to confirm.
PICTURE
OUTPUT
Advanced
White Peaking
100
Gamma
VIdeo
Color Temperature
Bright
Color Space
Auto
Color Settings
SETUP
Film Mode
Off
DynamicBlackTM
Off
OPTION
Item
Description
White Peaking
(Video source only) Increase the brightness of whites that are near 100%.
Gamma
Select the appropriate gamma from Film, Video, Graphics, and Standard.
Color Temperature
Change the intensity of the colors. Select a listed relative warmth value.
Color Space
Select a color space that has been specifically tuned for the input signal.
Use only for analog signals and certain digital sources.
Color Settings
Adjust the gain of the red, green, or blue channel of the image. It will affect
the black and white.
Adjust the offset of the red, green, or blue channel of the image. It will affect
the black and white.
Reset RGB gain/offset to return the factory default settings for color
adjustments.
Film Mode
Control film mode detection and determine whether the original source of
the input video was film or video.
DynamicBlackTM
Enable or disable the dynamic black function. Enable this function raises
the contrast ratio dynamically.
—
32 —
DLP Projector — Owner’s Manual
Output Menu
Press the Menu button to open the OSD menu. Press the arrow keys (pq) to select OUTPUT and press
the Enter button to enter the OUTPUT menu. Press the arrow keys (pq) to select the menu option
and press the Enter button to enter its submenu. Press the arrow keys (pqtu) to select or adjust the
desired settings and press the Enter button to confirm.
PICTURE
OUTPUT
Aspect Ratio
Auto
Overscan
OUTPUT
SETUP
Off
H Digital Zoom
100
V Digital Zoom
100
H Digital Shift
50
V Digital Shift
50
Image Warping
PIP/PBP
OPTION
Item
Description
Aspect Ratio
Display an image with the detected size, or resize the image by maximizing
either the height, width or both, or resize to the maximum size possible
while keeping the original aspect ratio.
Overscan
Remove noise around the image. Overscan Zoom enlarges image 3%
from original size. Overscan Crop cuts 3% of active pixels in four edges of
original image.
H Digital Zoom
Change the size of projector’s display area horizontally. If the display area
has been resized by this setting, it can be moved by changing the H Digital
Shift and V Digital Shift settings.
V Digital Zoom
Change the size of projector’s display area vertically. If the display area has
been resized by this setting, it can be moved by changing the H Digital Shift
and V Digital Shift settings.
H Digital Shift
Move the display area horizontally if its size has been changed by the
Digital Zoom setting.
V Digital Shift
Move the display area vertically if its size has been changed by the Digital
Zoom setting.
Image Warping
Configure the image warping settings. See “Image Warping Menu” on page
34.
PIP/PBP
Configure the PIP/PBP settings. See “PIP/PBP Menu” on page 35.
—
33 —
DLP Projector — Owner’s Manual
Image Warping Menu
Press the Menu button to open the OSD menu. Press the arrow keys (pq) to select OUTPUT and press
the Enter button to enter the OUTPUT menu. Press the arrow keys (pq) to select Image Warping and
press the Enter button to enter the Image Warping menu. Press the arrow keys (pq) to select the menu
option and press the Enter button to enter its submenu. Press the arrow keys (pqtu) to select or adjust
the desired settings and press the Enter button to confirm.
PICTURE
OUTPUT
Image Warping
H Keystone
20
V Keystone
20
H Pincushion
50
V Pincushion
50
SETUP
OPTION
Item
Description
H Keystone
Adjust the keystone horizontally and make a squarer image.
Horizontal keystone is used to correct a keystoned image shape in which
the left and right borders of the image are unequal in length. This is
intended for use with horizontally on-axis applications.
V Keystone
Adjust the keystone vertically and make a squarer image.
Vertical keystone is used to correct a keystoned image shape in which the
top and bottom are slanted to one of the sides. This is intended when for
use with vertically on-axis applications.
H Pincushion
Adjust the pincushion horizontally and make a more square image.
V Pincushion
Adjust the pincushion vertically and make a more square image.
—
34 —
DLP Projector — Owner’s Manual
PIP/PBP Menu
Press the Menu button to open the OSD menu. Press the arrow keys (pq) to select OUTPUT and press
the Enter button to enter the OUTPUT menu. Press the arrow keys (pq) to select PIP/PBP and press
the Enter button to enter the PIP/PBP menu. Press the arrow keys (pq) to select the menu option
and press the Enter button to enter its submenu. Press the arrow keys (pqtu) to select or adjust the
desired settings and press the Enter button to confirm.
PICTURE
PIP/PBP
PIP/PBP Enable
On
Main Source
OUTPUT
VGA
Sub Source
DVI-D
Swap
Size
SETUP
Large
Layout
PBP, Main Left
OPTION
Item
Description
PIP/PBP Enable
Toggle between displaying two sources at once (Main and PIP/PBP
images) or one source only.
Main Source
From the list of active inputs, select one to be used as the main image.
Sub Source
From the list of active inputs, select one to be used as the PIP/PBP.
Swap
Change the main image to PIP/PBP, and the PIP/PBP to main image.
Swapping is available only when PIP/PBP is enabled.
Size
Select the PIP/PBP size. Available options: Small, Medium, or Large.
Layout
Set the location of the PIP/PBP image on the screen.
PIP/PBP layout and size table as described below.
¾¾P : indicates primary source region (lighter color).
¾¾* : Both source regions are the same size.
PIP/PBP Layout
PIP/PBP Size
Small
Medium
Large
PBP, Main Left
P
P
PBP, Main Top
P
P
P
P
PBP, Main Right
P
P
—
35 —
P
DLP Projector — Owner’s Manual
PIP/PBP Layout
PIP/PBP Size
Small
Medium
Large
P
P
P
PIP-Bottom Right
P
P
P
PIP-Bottom Left
P
P
P
P
P
P
P
P
P
PBP, Main Bottom
PIP-Top Left
PIP-Top Right
—
36 —
DLP Projector — Owner’s Manual
Setup Menu
Press the Menu button to open the OSD menu. Press the arrow keys (pq) to select SETUP and press
the Enter button to enter the SETUP menu. Press the arrow keys (pq) to select the menu option and
press the Enter button to enter its submenu. Press the arrow keys (pqtu) to select or adjust the
desired settings and press the Enter button to confirm.
PICTURE
SETUP
Language
English
Ceiling Mount
OUTPUT
Auto
Rear Projection
Off
Lens Function
Menu Preferences
SETUP
Pin
Communications
OPTION
Item
Description
Language
This item allows you to select an available language for the OSD display.
Ceiling Mount
Turn the image upside down for ceiling-mounted projection.
Rear Projection
Reverse the image so you can project from behind a translucent screen.
Lens Function
Configure the lens function settings. See “Lens Function Menu” on page
38.
Menu Preferences
Configure the menu preferences settings. See “Menu Preferences Menu”
on page 39.
Pin
Configure the pin settings. See “Pin Menu” on page 40.
Communications
Configure the communications settings. See “Communications Menu” on
page 41.
—
37 —
DLP Projector — Owner’s Manual
Lens Function Menu
Press the Menu button to open the OSD menu. Press the arrow keys (pq) to select SETUP and press
the Enter button to enter the SETUP menu. Press the arrow keys (pq) to select Lens Function and
press the Enter button to enter the Lens Function menu. Press the arrow keys (pq) to select the menu
option and press the Enter button to enter its submenu. Press the arrow keys (pqtu) to select or adjust
the desired settings and press the Enter button to confirm.
PICTURE
Lens Function
Focus
Zoom
OUTPUT
Lens Shift
Lens Calibration
No
Lens Lock
No
SETUP
OPTION
Item
Description
Focus
Adjust focus function on the projected image.
Zoom
Adjust zoom function on the projected image.
Lens Shift
Shift the projected image.
Lens Calibration
Perform calibration and return lens to the center position.
Lens Lock
Select this function to prevent all lens motors from moving.
• Yes: Lens shift will be locked.
• No: Lens shift can be used by user.
—
38 —
DLP Projector — Owner’s Manual
Menu Preferences Menu
Press the Menu button to open the OSD menu. Press the arrow keys (pq) to select SETUP and press
the Enter button to enter the SETUP menu. Press the arrow keys (pq) to select Menu Preferences and
press the Enter button to enter the Menu Preferences menu. Press the arrow keys (pq) to select the
menu option and press the Enter button to enter its submenu. Press the arrow keys (pqtu) to select or
adjust the desired settings and press the Enter button to confirm.
PICTURE
Menu Preferences
Menu Transparency
0
Show Messages
On
OUTPUT
SETUP
OPTION
Item
Description
Menu Transparency
Change OSD menu background to be transparent.
Show Messages
Display status messages on the screen.
—
39 —
DLP Projector — Owner’s Manual
Pin Menu
Press the Menu button to open the OSD menu. Press the arrow keys (pq) to select SETUP and press the
Enter button to enter the SETUP menu. Press the arrow keys (pq) to select Pin and press the Enter button
to enter the Pin menu. Press the arrow keys (pq) to select the menu option and press the Enter button
to enter its submenu. Press the arrow keys (pqtu) to select or adjust the desired settings and press the
Enter button to confirm.
PICTURE
Pin
Pin Protect
Off
Change PIN
OUTPUT
SETUP
OPTION
Item
Description
PIN Protect
The PIN (personal identification number) feature allows you to password
protect your projector. Once you enable the PIN feature, you must enter the
PIN before you can project an image. (PIN Default : 12345)
Change PIN
Change the PIN.
—
40 —
DLP Projector — Owner’s Manual
Communications Menu
Press the Menu button to open the OSD menu. Press the arrow keys (pq) to select SETUP and press
the Enter button to enter the SETUP menu. Press the arrow keys (pq) to select Communications and
press the Enter button to enter the Communications menu. Press the arrow keys (pq) to select the
menu option and press the Enter button to enter its submenu. Press the arrow keys (pqtu) to select or
adjust the desired settings and press the Enter button to confirm.
PICTURE
Communications
LAN
WLAN
OUTPUT
Network
Serial Port Baud Rate
19200
Projector ID
0
SETUP
OPTION
Item
Description
LAN
Configure the local area network (LAN) settings.
• DHCP: Turn the DHCP ON/OFF.
• IP Address: Assign Network IP Address.
• Subnet Mask: Assign Network Subnet Mask.
• Default Gateway: Assign Network Default Gateway.
• MAC Address: Display the network MAC Address value.
• Apply: Apply Network settings.
WLAN
Configure the wireless local area network (WLAN) settings.
• Enable: Enable/Disable WLAN.
• Start IP: Start of IP Address.
• End IP: End of IP Address.
• Subnet Mask: Assign Network Subnet Mask.
• Default Gateway: Assign Network Default Gateway.
• MAC Address: Display network MAC Address value.
• SSID: Assign Network Service Set Identifier.
Network
Configure the general network settings.
• Projector Name: Display the projector hostname for Network.
• Restart Network: Restart the network.
• Network Factory Reset: Perform factory reset on the network settings.
The Projector Name, LAN IP, WLAN IP, and SNMP settings will be reset.
Serial Port Baud Rate
Select the serial port and baud rate.
Projector ID
Set the projector ID number. The projector will respond to IR remotes set
either at the same address as the projector or to IR remotes set to address
0.
—
41 —
DLP Projector — Owner’s Manual
Option Menu
Press the Menu button to open the OSD menu. Press the arrow keys (pq) to select OPTION and press
the Enter button to enter the OPTION menu. Press the arrow keys (pq) to select the menu option
and press the Enter button to enter its submenu. Press the arrow keys (pqtu) to select or adjust the
desired settings and press the Enter button to confirm.
PICTURE
OUTPUT
OPTION
Auto Source
On
High Altitude
Off
Test Pattern
Off
Background Color
Logo
Hot-Key settings
SETUP
Blank Screen
Power Settings
Light Source Settings
Information
OPTION
Factory Reset
Service
Item
Description
Auto Source
Select “On” to allow the projector to search for other signals if the current
input signal is lost. When the setting is disabled, the projector will only
search current input connection.
High Altitude
Set high altitude mode On/Off. When On, the fan will operate at high speed
to ensure sufficient air flow for high altitudes.
Test Pattern
Choose the desired internal test pattern to display. Press the Pattern button
to display next test pattern.
Background Color
Use this feature to display a “Logo”, “Blue”, “Black” or “White” screen when
no signal is available.
Hot-Key settings
Assign a different function to the hot-key on the remote control by
highlighting the function in the list and pressing the Enter button. Choose
a function that does not already have a dedicated button, and assign the
hot-key to that function, allowing you to quickly and easily use the chosen
function.
Power Settings
Configure the power settings. See “Power Settings Menu” on page 43.
Light Source Settings
Configure the light source settings. See “Light Source Settings Menu” on
page 44.
Information
Display the projector information for source, resolution, and software
version on the screen.
Factory Reset
Restore all settings to their default value. It will not reset network.
WARNING: After resetting, lens calibration is necessary.
Service
For service only.
—
42 —
DLP Projector — Owner’s Manual
Power Settings Menu
Press the Menu button to open the OSD menu. Press the arrow keys (pq) to select OPTION and press
the Enter button to enter the OPTION menu. Press the arrow keys (pq) to select Power Settings and
press the Enter button to enter the Power Settings menu. Press the arrow keys (pq) to select the menu
option and press the Enter button to enter its submenu. Press the arrow keys (pqtu) to select or adjust
the desired settings and press the Enter button to confirm.
PICTURE
Power Settings
Standby Power Mode
Communication mode
Direct Power On
OUTPUT
Off
Auto Standby
20 Mins
Auto Sleep
No
SETUP
OPTION
Item
Description
Standby Power Mode
Set the standby power mode.
• 0.5W mode: The projector is in standby mode when connected to AC
power. (<0.5W)
• Communication mode: The projector could be controlled via the LAN
terminal during power standby.
Direct Power On
The projector automatically turns on when electrical power is connected.
Auto Standby
Automatically switch the projector to standby mode after no signals are
detected for a preset number of minutes. If an active signal is received, the
projector reactivates and displays the image.
Auto Sleep
Automatically switch to sleep mode after it has been on for a specified
amount of time.
—
43 —
DLP Projector — Owner’s Manual
Light Source Settings Menu
Press the Menu button to open the OSD menu. Press the arrow keys (pq) to select OPTION and press
the Enter button to enter the OPTION menu. Press the arrow keys (pq) to select Light Source Settings
and press the Enter button to enter the Light Source Settings menu. Press the arrow keys (pq) to
select the menu option and press the Enter button to enter its submenu. Press the arrow keys (pqtu)
to select or adjust the desired settings and press the Enter button to confirm.
PICTURE
Light Source Settings
Light Source Mode
Constant Power
Constant Power Settings
OUTPUT
10
Total Projector Hours
Lamp Hours
Reset Lamp Hours
SETUP
OPTION
Item
Description
Light Source Mode
Select Constant Power or Eco Mode. When in Eco Mode, the projector
will adjust to the lowest fan speed and switch the light source power to the
minimum setting.
Constant Power Settings
Set the value of the light source power (in Watts).
Total Projector Hours
Display the overall projection time.
Lamp Hours
Display the lamp used hours.
Reset Lamp Hours
Reset the lamp used hours counter to zero. Do this after changing the
lamp.
—
44 —
DLP Projector — Owner’s Manual
Control Your Projector Using Web Browser
Ethernet
Projector
Wired LAN Terminal functionalities
Remote control and monitoring of a projector from a PC (or Laptop) via wired LAN is also possible.
Compatibility with Crestron control boxes enables not only collective projector management on a network
but also management from a control panel on a PC (or Laptop) browser screen.
• Crestron is a registered trademark of Crestron Electronics, Inc. of the United States.
Supported External Devices
This projector is supported by the specified commands of the Crestron Electronics controller and related
software (ex, RoomView ®).
http://www.crestron.com/
For more detail of information about the diverse types of external devices which can be connected to the
Ethernet port and remote/control the projector, as well as the related control commands supporting for
each external device, kindly please get contact with the Support-Service team directly.
—
45 —
DLP Projector — Owner’s Manual
LAN_RJ45
1.Connect an RJ45 cable to Ethernet port on the projector and the PC (Laptop).
2.On the PC (Laptop), select Start → Control Panel → Network and Internet.
3.Right-click on Local Area Connection, and select Properties.
—
46 —
DLP Projector — Owner’s Manual
4.In the Properties window, select the Networking tab, and select Internet Protocol (TCP/IP).
5.Click Properties.
6.Click Use the following IP address and fill in the IP address and Subnet mask, then click OK.
—
47 —
DLP Projector — Owner’s Manual
7.Press the Menu button on the projector.
8.Select SETUP → Communications → LAN.
9.After getting into LAN, input the following:
•
•
•
•
DHCP: Off
IP Address: 10.10.10.10
Subnet Mask: 255.255.255.0
Default Gateway: 0.0.0.0
10.Press the Enter / ► button to confirm settings.
Open a web browser (for example, Microsoft Internet Explorer with Adobe Flash Player 9.0 or higher).
11.In the Address bar, input the IP address: 10.10.10.10.
12.Press the Enter / ► button.
The projector is setup for remote management. The LAN/RJ45 function displays as follows.
—
48 —
DLP Projector — Owner’s Manual
Category
Crestron Control
Projector
Item
IP Address
15
IP ID
3
Port
5
Projector Name
10
Location
10
Assigned To
10
DHCP (Enabled)
Network Configuration
(N/A)
IP Address
15
Subnet Mask
15
Default Gateway
15
Enabled
User Password
Admin Password
Input-Length
(N/A)
New Password
10
Confirm
10
Enabled
(N/A)
New Password
10
Confirm
10
For more information, please visit http://www.crestron.com.
—
49 —
DLP Projector — Owner’s Manual
RS232 by Telnet Function
Besides projector connected to RS232 interface with “Hyper-Terminal” communication by dedicated
RS232 command control, there is alternative RS232 command control way, so called “RS232 by TELNET”
for LAN/RJ45 interface.
Quick Start-Guide for “RS232 by TELNET”
Check and get the IP-Address on OSD of the projector.
Make sure that laptop/PC can access the web-page of the projector.
Make sure that “Windows Firewall” setting to be disabled in case of “TELNET” function filtering out by
laptop/PC.
Start → All Programs → Accessories → Command Prompt
Input the command format like the below:
telnet ttt.xxx.yyy.zzz 3023 (the Enter button is pressed)
(ttt.xxx.yyy.zzz: IP-Address of the projector)
If Telnet-Connection ready, and user can have RS232 command input, then press the Enter button, the
RS232 command will be workable.
—
50 —
DLP Projector — Owner’s Manual
How to have TELNET enabled in Windows VISTA / 7
By default installation for Windows VISTA, “TELNET” function is not included. But end-user can have it by
way of “Turn Windows features On or Off” to be enabled.
1.Open “Control Panel” in Windows VISTA.
2.Open “Programs”.
—
51 —
DLP Projector — Owner’s Manual
3.Select “Turn Windows features on or off” to open.
4.Have “Telnet Client” option checked, then click OK.
Specsheet for “RS232 by TELNET”:
1.Telnet: TCP
2.Telnet port: 3023
(for more detail, kindly please get contact with the service agent or team)
3.Telnet utility: Windows “TELNET.exe” (console mode)
4.Disconnection for RS232-by-Telnet control normally: Close Windows Telnet utility directly after TELNET
connection ready.
5.Limitation 1 for Telnet-Control: there is less than 50 bytes for successive network payload for
Telnet-Control application.
Limitation 2 for Telnet-Control: there is less than 31 bytes for one complete RS232 command for
Telnet-Control.
Limitation 3 for Telnet-Control: Minimum delay for next RS232 command must be more than 200 (ms).
(*, In Windows built-in “TELNET.exe” utility, pressing the Enter button will create a “Carriage-Return”
and “New-Line” code.)
—
52 —
DLP Projector — Owner’s Manual
Maintenance and Security
Replacing the Projection Lamp
The projection lamp should be replaced when it burns out. It should only be replaced with a certified
replacement part, which you can order from your local dealer.
Important:
• The projection lamp used in this product contains a small amount of mercury.
• Do not dispose this product with general household waste.
• Disposal of this product must be carried out in accordance with the regulations of your local
authority.
Warning:
Be sure to turn off and unplug the projector at least 30 minutes before replacing the lamp. Failure to do
so could result in a severe burn.
Caution:
• In rare cases the lamp bulb may burn out during normal operation and cause glass dust or shards
to be discharged outward from the rear exhaust vent.
• Do not inhale or do not touch glass dust or shards. Doing so could result in injury.
• Always keep your face away from the exhaust vent so that you do not suffer from the gas and
broken shards of the lamp.
• When removing the lamp from a ceiling-mounted projector, make sure that no one is under the
projector. Glass fragments could fall if the lamp has been burned out.
IF A LAMP EXPLODES
• If a lamp explodes, the gas and broken shards may scatter inside the projector and they may come
out of the exhaust vent. The gas contains toxic mercury.
• Open windows and doors for ventilation.
• If you inhale the gas or the shards of the broken lamp enter your eyes or mouth, consult the doctor
immediately.
Note:
Part number of the Projection Lamp: SP.75A01GC01.
—
53 —
DLP Projector — Owner’s Manual
Perform the following to replace the lamp:
1.Turn the projector off. Allow the projector to cool down into standby mode.
2.Release the screws on the lamp door.
3.Open the lamp door.
4.Release the screws on the lamp module.
—
54 —
DLP Projector — Owner’s Manual
5.Carefully remove the lamp module.
6.Install the new lamp module by reversing the previous steps.
Resetting the Lamp
After replacing the lamp, you should reset the lamp hour counter to zero.
Perform the following to reset the lamp hour counter:
1.Press the Menu button.
PICTURE
OUTPUT
SETUP
OPTION
PICTURE
Display Mode
Presentation
Brightness
50
Contrast
50
Sharpness
2
Color
50
Tint
50
Phase
50
Frequency
50
Horz Position
50
Vert Position
50
2.Use the arrow keys (pq) to select OPTION and press the Enter button to enter the OPTION menu.
PICTURE
OUTPUT
OPTION
Auto Source
On
High Altitude
Off
Test Pattern
Off
Background Color
Logo
Hot-Key settings
SETUP
Blank Screen
Power Settings
Light Source Settings
Information
OPTION
Factory Reset
Service
—
55 —
DLP Projector — Owner’s Manual
3.Use the arrow keys (pq) to select Light Source Settings and press the Enter button to enter its
submenu.
PICTURE
Light Source Settings
Light Source Mode
Constant Power
Constant Power Settings
OUTPUT
10
Total Projector Hours
Lamp Hours
Reset Lamp Hours
SETUP
OPTION
4.Use the arrow keys (pq) to select Reset Lamp Hours and press the Enter button to enter its
submenu.
5.Use the arrow keys (pq) to select Yes and press the Enter button to reset the lamp used hours
counter to zero.
Reset Lamp Hours
No
Yes
6.Press the Exit button several times to exit the menu.
Replacing the Projection Lens
Perform the following to replace the projection lens:
1.Center the lens. Use the Lens H or Lens V button (on the remote control) to adjust the lens at its center
position.
Important:
• Ensure that the lens is at or near its center position.
• Attempting to remove the lens when at a large offset may cause damage to the lens assembly.
—
56 —
DLP Projector — Owner’s Manual
2.Turn the projector off. Allow the projector to cool down into standby mode.
3.Rotate the lens ring counter-clockwise and then remove
it from the projector.
4.Pull the rejection pin and then rotate the lens counterclockwise to release from the compartment.
5.Carefully remove the lens assembly.
6.Install the new lens. See “Installing the Projection Lens” on page 10.
—
57 —
DLP Projector — Owner’s Manual
Replacing the Filter
The interval of the filter replacement is affected by the dustiness. Check the filters periodically for better
performance.
Note:
Dirty filter may reduce the air flowing into the projector and the temperature in the projector may rise
as the result. This may activate the protection mechanism or damage the components.
Important:
Check, clean, and replace the filter periodically.
Perform the following to replace the filter:
1.Turn the projector off. Allow the projector to cool down into standby mode.
2.Release the screws on the dust filter cover A .
3.Pull out the filter cover and replace the filter
B
.
B
A
4.Install the new filter to the projector by reversing the previous steps.
Note:
Part number of the Filter: 51.8SG09G001.
—
58 —
DLP Projector — Owner’s Manual
Cleaning the Projector
Cleaning the projector to remove dust and grime will help ensure trouble-free operation.
Warning:
• Be sure to turn off and unplug the projector at least 30 minutes before cleaning. Failure to do so
could result in a severe burn.
• Use only a dampened cloth when cleaning. Do not allow water to enter the ventilation openings on
the projector.
• If a little water gets into the projector interior while cleaning, leave unplugged in a well-ventilated
room for several hours before using.
• If a lot of water gets into the projector interior when cleaning, have the projector serviced.
Cleaning the Lens
You can purchase Optical lens cleaner from most camera stores. Refer to the following to clean the
projector lens.
1.Apply a little Optical lens cleaner to a clean soft cloth. (Do not apply the cleaner directly to the lens.)
2.Lightly wipe the lens in a circular motion.
Caution:
• Do not use abrasive cleaners or solvents.
• To prevent discoloration or fading, avoid getting cleaner on the projector case.
Cleaning the Case
Refer to the following to clean the projector case.
1.Wipe off dust with a clean dampened cloth.
2.Moisten the cloth with warm water and mild detergent (such as used to wash dishes), and then wipe the
case.
3.Rinse all detergent from the cloth and wipe the projector again.
Caution:
To prevent discoloration or fading of the case, do not use abrasive alcohol-based cleaners.
—
59 —
DLP Projector — Owner’s Manual
Using the Kensington® Lock
If you are concerned about security, attach the projector to a permanent object with the Kensington slot
and a security cable.
Note:
Contact your vendor for details on purchasing a suitable Kensington security cable.
The security lock corresponds to Kensington’s MicroSaver Security System. If you have any comment,
contact: Kensington, 2853 Campus Drive, San Mateo, CA 94403, U.S.A. Tel: 800-535-4242,
http://www.Kensington.com.
—
60 —
DLP Projector — Owner’s Manual
Troubleshooting
Common Problems and Solutions
These guidelines provide tips to deal with problems you may encounter while using the projector. If the
problem remains unsolved, contact your dealer for assistance.
Often after time spent troubleshooting, the problem is traced to something as simple as a loose
connection. Check the following before proceeding to the problem-specific solutions.
¾¾ Use some other electrical device to confirm that the electrical outlet is working.
¾¾ Ensure the projector is turned on.
¾¾ Ensure all connections are securely attached.
¾¾ Ensure the attached device is turned on.
¾¾ Ensure a connected PC is not in suspending mode.
¾¾ Ensure a connected notebook computer is configured for an external display.
(This is usually done by pressing an Fn-key combination on the notebook.)
Tips for Troubleshooting
• In each problem-specific section, try the steps in the order suggested. This may help you to solve the
problem more quickly.
• Try to pin point the problem and thus avoid replacing non-defective parts. For example, if you replace
batteries and the problem remains, put the original batteries back and go to the next step.
• Keep a record of the steps you take when troubleshooting: The information may be useful when calling
for technical support or for passing on to service personnel.
—
61 —
DLP Projector — Owner’s Manual
LED Error Messages
The LED status indicators are located on the rear of the projector. Each LED is defined below.
• Power LED
LED Status
Red
Purple
Projector State
Blue
Steady Light
Off
Off
Standby state (LAN connection is inactive).
Flashing (0.5
sec on/0.5 sec
off)
Off
Off
Standby state (LAN connection is active).
Off
Off
Steady Light
Power is on and lamp is lighting.
Off
Flashing (0.5
sec on/0.5 sec
off)
Off
Cooling for an abnormal shutdown.
Note:
During firmware upgrade, the Power LED lights purple, and Lamp LED, Temp LED, and Filter LED light red.
• Lamp LED
LED Status
Projector State
Red
Steady Light
Lamp has failed and is in error state.
Flashing (3 sec on/1 sec off) Lamp driver has failed and lamp is in error state.
Flashing (1 sec on/1 sec off) Color wheel has failed.
• Temp LED/Filter LED
LED Status
Temp (Red)
Steady Light
Projector State
Filter (Red)
Off
Over temperature. The projector will shut down.
Flashing (0.5 Off
sec on/0.5
sec
Fan has failed and is in error state.
Flashing (3
sec on/1 sec
off)
Flashing (1
sec on/1 sec
off)
Filter has overheated and is in error state.
Off
Steady Light
Filter switch has failed and is in error state.
—
62 —
DLP Projector — Owner’s Manual
Image Problems
Problem: No image appears on the screen
1.Verify the settings on your notebook or desktop PC.
2.Turn off all equipment and power on again in the correct order.
Problem: The image is blurred
1.Press the Focus button to adjust the focus on the projector.
2.Press the Auto button to automatically optimize image.
3.Ensure the projector-to-screen distance is within the specified range.
4.Check that the projector lens is clean.
Problem: The image is wider at the top or bottom (trapezoid effect)
1.Position the projector so it is as perpendicular to the screen as possible.
2.Press the Keystone H or Keystone V button on the remote control to correct the problem.
Problem: The image is reversed
Check the Rear Projection on the Setup menu of the OSD.
Problem: The image is streaked
1.Set the Phase and Frequency settings on the Picture menu of the OSD to the default settings.
2.Ensure the problem is not caused by a connected PC’s video card, connect to another computer.
Problem: The image is flat with no contrast
Adjust the Contrast setting on the Picture menu of the OSD.
Problem: The color of the projected image does not match the source image
Adjust the Color Temperature and Gamma settings on the Picture > Advanced menu of the OSD.
Lamp Problems
Problem: There is no light from the projector
1.Check that the power cable is securely connected.
2.Ensure the power source is good by testing with another electrical device.
3.Restart the projector in the correct order and check if the Lamp LED indicator is flashing.
4.If you have replaced the lamp recently, try resetting the lamp connections.
—
63 —
DLP Projector — Owner’s Manual
5.Replace the lamp module.
6.Put the old lamp back in the projector and have the projector serviced.
Problem: The lamp goes off
1.Power surges can cause the lamp to turn off. Re-plug power cord. When the Lamp LED is red,
press “
” on the built-in keypad or press “
” on the remote control to turn off the projector.
2.Replace the lamp module.
3.Put the old lamp back in the projector and have the projector serviced.
Remote Control Problems
Problem: The projector does not respond to the remote control
1.Direct the remote control towards remote sensor on the projector.
2.Ensure the path between remote and sensor is not obstructed.
3.Turn off any fluorescent lights in the room.
4.Make sure that the batteries are installed with the correct polarity.
5.Replace the batteries.
6.Turn off other Infrared-enabled devices in the vicinity.
7.Have the remote control serviced.
Having the Projector Serviced
If you are unable to solve the problem, you should have the projector serviced. Pack the projector in the
original carton. Include a description of the problem and a checklist of the steps you took when trying to fix
the problem. The information may be useful to service personnel. For servicing, return the projector to the
place you purchased it.
—
64 —
DLP Projector — Owner’s Manual
HDMI Q & A
Q. What is the difference between a “Standard” HDMI cable and a “High-Speed” HDMI
cable?
Recently, HDMI Licensing, LLC announced that cables would be tested as Standard or High- Speed
cables.
• Standard (or “category 1”) HDMI cables have been tested to perform at speeds of 75Mhz or up to
2.25Gbps, which is the equivalent of a 720p/1080i signal.
• High Speed (or “category 2”) HDMI cables have been tested to perform at speeds of 340Mhz or up to
10.2Gbps, which is the highest bandwidth currently available over an HDMI cable and can successfully
handle 1080p signals including those at increased color depths and/or increased refresh rates from the
Source. High-Speed cables are also able to accommodate higher resolution displays, such as WQXGA
cinema monitors (resolution of 2560 x 1600).
Q. How do I run HDMI cables longer than 10 meters?
There are many HDMI Adopters working on HDMI solutions that extend a cable’s effective distance from
the typical 10 meter range to much longer lengths. These companies manufacture a variety of solutions
that include active cables (active electronics built into cables that boost and extend the cable’s signal),
repeaters, amplifiers as well as CAT5/6 and fiber solutions.
Q. How can I tell if a cable is an HDMI certified cable?
All HDMI products are required to be certified by the manufacturer as part of the HDMI Compliance Test
Specification. However, there may be instances where cables bearing the HDMI logo are available but
have not been properly tested. HDMI Licensing, LLC actively investigates these instances to ensure that
the HDMI trademark is properly used in the market. We recommend that consumers buy their cables from
a reputable source and a company that is trusted.
For more detail information check http://www.hdmi.org/learningcenter/faq.aspx#49.
—
65 —
DLP Projector — Owner’s Manual
Specifications
Specifications
Item
Description
Display type
DMD, 0.7” XGA, 0.65” WXGA, 0.67” WUXGA
Resolution
XGA (1024 x 768), WXGA (1280 x 800), WUXGA (1920 x 1200)
Zoom/focus
Power Focus / Zoom
Zoom ratio
Depend on Lens
Keystone correction
Vertical: +/- 20 degrees, Horizontal: +/- 20 degrees
Projection methods
Front, Rear, Desktop/Ceiling (Rear, Front)
Data compatibility
VGA, SVGA, XGA, WXGA, HD720, SXGA, SXGA+, UXGA, HD1080,
HDTV, WUXGA, SDTV, Mac
Video compatibility
1080 i/p, 720p, 576 i/p, 480 i/p
H-Sync
15.7KHz~91.1KHz
V-Sync
24Hz~85Hz
Safety Certification
CB, CCC, cTUVus, FCC, CE, KC/KCC, EAC
Operation temperature
5° ~ 40°C
Storage temperature
-10° ~ 60°C
Storage humidity
5% to 90%
Dimensions (W x H x D)
452.8 x 389.9 x 205.5 mm (without lens and elevators)
AC Input
100 VAC – 240 VAC, 50 – 60Hz
Power consumption
450W (ECO brightness mode), 580W (Normal brightness mode)
Lamp
1500 hrs @ 465W
2000 hrs @ 360W
Input Terminals
HDBaseT:
HDMI:
DVI-D:
Y/Pb/Pr:
VGA:
Video:
RJ45 x 1
HDMI (version 1.3) x 1
DVI (supports only digital signal) x 1
Component x 1
D-sub 15 pin x 1
Composite (CVBS) x 1
Control Terminals
LAN Control:
Remote Control IN:
Serial port (RS232C):
Wi-Fi:
Service:
RJ45 x 1
Mini jack (3.5mm) x 1
D-Sub 9 pin x 1
USB Type A x 1
Mini USB x 1
Security
Kensington lock
Security Bar
Note:
For questions regarding product specifications, please contact your local distributor.
—
66 —
DLP Projector — Owner’s Manual
Image Height
Projection Distance vs. Projection Size
Projection Distance
Projection Distance and Size Table
EK-612X/ XGA:
Lens Model Name
A15
(AH-A22010)
A01
(AH-A22020)
Projection Size
Diagonal Height Width
(inch)
(m)
(m)
A02
(AH-A22030)
A03
(AH-A21010)
A13
(AH-A23010)
Projection Distance
Min
(m)
Max
(m)
Min
(m)
Max
(m)
Min
(m)
Max
(m)
Min
(m)
Max
(m)
Min
(m)
Max
(m)
50
0.76
1.02
0.79
1.01
1.01
1.28
1.28
1.61
1.61
3.05
3.05
5.79
60
0.91
1.22
0.95
1.21
1.21
1.54
1.54
1.93
1.93
3.66
3.66
6.95
70
1.07
1.42
1.11
1.41
1.41
1.79
1.79
2.25
2.25
4.27
4.27
8.11
80
1.22
1.63
1.27
1.61
1.61
2.05
2.05
2.57
2.57
4.88
4.88
9.27
90
1.37
1.83
1.43
1.81
1.81
2.30
2.30
2.89
2.89
5.49
5.49
10.42
100
1.52
2.03
1.58
2.01
2.01
2.56
2.56
3.21
3.21
6.10
6.10
11.58
110
1.68
2.24
1.74
2.21
2.21
2.82
2.82
3.53
3.53
6.71
6.71
12.74
120
1.83
2.44
1.90
2.41
2.41
3.07
3.07
3.85
3.85
7.32
7.32
13.90
130
1.98
2.64
2.06
2.62
2.62
3.33
3.33
4.17
4.17
7.92
7.92
15.06
140
2.13
2.84
2.22
2.82
2.82
3.58
3.58
4.49
4.49
8.53
8.53
16.22
150
2.29
3.05
2.38
3.02
3.02
3.84
3.84
4.82
4.82
9.14
9.14
17.37
160
2.44
3.25
2.54
3.22
3.22
4.10
4.10
5.14
5.14
9.75
9.75
18.53
170
2.59
3.45
2.69
3.42
3.42
4.35
4.35
5.46
5.46
10.36 10.36 19.69
180
2.74
3.66
2.85
3.62
3.62
4.61
4.61
5.78
5.78
10.97 10.97 20.85
190
2.90
3.86
3.01
3.82
3.82
4.86
4.86
6.10
6.10
11.58
11.58
22.01
200
3.05
4.06
3.17
4.02
4.02
5.12
5.12
6.42
6.42
12.19 12.19 23.16
250
3.81
5.08
3.96
5.03
5.03
6.40
6.40
8.03
8.03
15.24 15.24 28.96
300
4.57
6.10
4.75
6.03
6.04
7.68
7.68
9.63
9.63
18.29 18.29 34.75
—
67 —
DLP Projector — Owner’s Manual
EK-611W/ WXGA:
Lens Model Name
A15
(AH-A22010)
A01
(AH-A22020)
Projection Size
A02
(AH-A22030)
A03
(AH-A21010)
A13
(AH-A23010)
Projection Distance
Diagonal Height Width
(inch)
(m)
(m)
Min
(m)
Max
(m)
Min
(m)
Max
(m)
Min
(m)
Max
(m)
Min
(m)
Max
(m)
Min
(m)
Max
(m)
50
0.67
1.08
0.85
1.08
1.08
1.38
1.38
1.74
1.73
3.32
3.28
6.24
60
0.81
1.29
1.02
1.29
1.29
1.65
1.65
2.08
2.06
3.96
3.92
7.46
70
0.94
1.51
1.19
1.51
1.51
1.93
1.93
2.43
2.42
4.64
4.59
8.73
80
1.08
1.72
1.36
1.72
1.72
2.20
2.20
2.77
2.75
5.28
5.23
9.94
90
1.21
1.94
1.53
1.94
1.94
2.48
2.48
3.12
3.10
5.96
5.90
11.21
100
1.35
2.15
1.70
2.15
2.15
2.75
2.75
3.46
3.44
6.60
6.54
12.43
110
1.48
2.37
1.87
2.37
2.37
3.03
3.03
3.82
3.79
7.28
7.20
13.70
120
1.62
2.58
2.04
2.58
2.58
3.30
3.30
4.15
4.13
7.92
7.84
14.91
130
1.75
2.8
2.21
2.80
3.02
3.58
3.58
4.51
4.48
8.60
8.51
16.18
140
1.88
3.02
2.39
3.02
3.02
3.87
3.87
4.86
4.83
9.27
9.18
17.46
150
2.02
3.23
2.55
3.23
3.23
4.13
4.13
5.20
5.17
9.92
9.82
18.67
160
2.15
3.45
2.73
3.45
3.45
4.42
4.42
5.55
5.52
10.59 10.49 19.94
170
2.29
3.66
2.89
3.66
3.66
4.68
4.68
5.89
5.86
11.24
11.13
21.15
11.80
22.43
180
2.42
3.88
3.07
3.88
3.88
4.97
4.97
6.25
6.21
11.91
190
2.56
4.09
3.23
4.09
4.09
5.24
5.24
6.58
6.54
12.56 12.43 23.64
200
2.69
4.31
3.40
4.31
4.31
5.52
5.52
6.94
6.90
13.23 13.10 24.91
250
3.37
5.38
4.25
5.38
5.38
6.89
6.89
8.66
8.61
16.52 16.36 31.10
300
4.04
6.46
5.10
6.46
6.46
8.27
8.27
10.40 10.34 19.83 19.64 37.34
—
68 —
DLP Projector — Owner’s Manual
EK-610U/ WUXGA:
Lens Model Name
A15
(AH-A22010)
A01
(AH-A22020)
Projection Size
A02
(AH-A22030)
A03
(AH-A21010)
A13
(AH-A23010)
Projection Distance
Diagonal Height Width
(inch)
(m)
(m)
Min
(m)
Max
(m)
Min
(m)
Max
(m)
Min
(m)
Max
(m)
Min
(m)
Max
(m)
Min
(m)
Max
(m)
50
0.67
1.08
0.81
1.03
1.02
1.31
1.31
1.65
1.65
3.14
3.13
5.94
60
0.81
1.29
0.97
1.23
1.23
1.58
1.58
1.98
1.98
3.77
3.74
7.10
70
0.94
1.51
1.13
1.43
1.43
1.84
1.84
2.31
2.31
4.40
4.38
8.31
80
1.08
1.72
1.29
1.63
1.64
2.10
2.10
2.64
2.64
5.03
4.99
9.46
90
1.21
1.94
1.46
1.84
1.84
2.36
2.36
2.97
2.97
5.66
5.63
10.67
100
1.35
2.15
1.61
2.04
2.05
2.63
2.63
3.3
3.3
6.29
6.24
11.83
110
1.48
2.37
1.78
2.25
2.25
2.89
2.89
3.62
3.62
6.92
6.87
13.04
120
1.62
2.58
1.94
2.45
2.46
3.15
3.15
3.95
3.95
7.55
7.48
14.19
130
1.75
2.8
2.10
2.66
2.66
3.42
3.42
4.28
4.28
8.18
8.12
15.40
140
1.88
3.02
2.27
2.87
2.86
3.68
3.68
4.61
4.61
8.80
8.76
16.61
150
2.02
3.23
2.42
3.07
3.07
3.94
3.94
4.94
4.94
9.43
9.37
17.77
160
2.15
3.45
2.59
3.28
3.27
4.20
4.20
5.27
5.27
10.06 10.01 18.98
170
2.29
3.66
2.75
3.48
3.48
4.47
4.47
5.60
5.60
10.69 10.61 20.13
180
2.42
3.88
2.91
3.69
3.68
4.73
4.73
5.93
5.93
11.32
11.25
21.34
11.86
22.50
190
2.56
4.09
3.07
3.89
3.89
4.99
4.99
6.26
6.26
11.95
200
2.69
4.31
3.23
4.09
4.09
5.25
5.25
6.59
6.59
12.58 12.50 23.71
250
3.37
5.38
4.04
5.11
5.11
6.57
6.57
8.24
8.24
15.72 15.60 29.59
300
4.04
6.46
4.85
6.13
6.14
7.88
7.88
9.89
9.89
18.87 18.73 35.53
Note:
• The values in the tables are approximate and may be slightly different from the actual measurements.
• In case of ceiling mount, it is necessary to match at the spot.
—
69 —
DLP Projector — Owner’s Manual
Timing Mode Table
Signal
Type
PC
Resolution
Frame
(Hz)
rate
QD881
VGA
Component
HDMI
DVI
HDBaseT
Composite
640x480
60
DMT0660
V
—
V
V
V
—
640x480
72
DMT0672
V
—
V
V
V
—
640x480
75
DMT0675
V
—
V
V
V
—
640x480
85
DMT0685
V
—
V
V
V
—
640x480
66.6
APP0667
—
—
V
V
V
—
720x400
70
IBM0770H
—
—
V
V
V
—
800x600
60
DMT0860
V
—
V
V
V
—
800x600
72
DMT0872
V
—
V
V
V
—
800x600
75
DMT0875
V
—
V
V
V
—
800x600
85
DMT0885
V
—
V
V
V
—
832x624
75
8362A75
V
—
V
V
V
—
848x480
50
CVT0850H
—
—
V
V
V
—
848x480
60
CVT0860H
—
—
V
V
V
—
848x480
75
CVT0875H
—
—
V
V
V
—
848x480
85
CVT0885H
—
—
V
V
V
—
1024x768
60
DMT1060
V
—
V
V
V
—
1024x768
75
DMT1075
V
—
V
V
V
—
1024x768
85
DMT1085
V
—
V
V
V
—
1152x720
50
CVT1150D
—
—
V
V
V
—
1152x720
60
CVT1160D
—
—
V
V
V
—
1152x720
75
CVT1175D
—
—
V
V
V
—
1152x720
85
CVT1185D
—
—
V
V
V
—
1152x864
60
CVT1160
V
—
V
V
V
—
1152x864
70
DMT1170
V
—
V
V
V
—
1152x864
75
DMT1175
V
—
V
V
V
—
1152x864
85
DMT1185
V
—
V
V
V
—
1152x870
75
APP1175
—
—
V
V
V
—
1280x720
50
CVT1250H
—
—
V
V
V
—
1280x720
60
CVT1260H
V
—
V
V
V
—
1280x720
75
CVT1275H
V
—
V
V
V
—
1280x720
85
CVT1285H
V
—
V
V
V
—
1280x768
60
CVT1260E
V
—
V
V
V
—
1280x768
75
CVT1275E
V
—
V
V
V
—
1280x768
85
CVT1285E
V
—
V
V
V
—
1280x800
50
CVT1250_
V
—
V
V
V
—
1280x800
60
DMT1260D
V
—
V
V
V
—
1280x800
75
CVT1275_
V
—
V
V
V
—
1280x800
85
CVT1285_
V
—
V
V
V
—
1280x960
50
CVT1250
—
—
V
V
V
—
1280x960
60
CVT1260
V
—
V
V
V
—
—
70 —
DLP Projector — Owner’s Manual
Signal
Type
PC
Resolution
Frame
(Hz)
rate
QD881
VGA
Component
HDMI
DVI
HDBaseT
Composite
1280x960
75
CVT1275
V
—
V
V
V
—
1280x960
85
CVT1285
V
—
V
V
V
—
1280x1024
50
CVT1250G
—
—
V
V
V
—
1280x1024
60
DMT1260G
V
—
V
V
V
—
1280x1024
75
DMT1275G
V
—
V
V
V
—
1280x1024
85
DMT1285G
V
—
V
V
V
—
1360x768
50
CVT1350H
—
—
V
V
V
—
1360x768
60
DMT1360H
—
—
V
V
V
—
1360x768
75
CVT1375H
—
—
V
—
V
—
1360x768
85
CVT1385H
—
—
V
—
V
—
1366x768
60
DMR1360H
V
—
V
V
V
—
1400x1050
50
CVT1450
—
—
V
V
V
—
1400x1050
60
CVT1460
—
—
V
V
V
—
1400x1050
75
CVT1475
V
—
V
V
V
—
1440x900
60
CVT1460D
V
—
V
V
V
—
1440x900
75
CVT1475D
—
—
V
V
V
—
1600x900
60
DMR1660H
—
—
V
V
V
—
1600x1200
60
DMT1660
V
—
V
V
V
—
1680x1050
60
CVT1660D
V
—
V
V
V
—
1920X1080
50
CVT1950H
—
—
V
V
V
—
1920X1080
60
CVR1960H
V
—
V
V
V
—
1920X1200RB
60
CVR1960D
V
—
V
V
V
—
1920X1200RB
50
CVT1950D
V
—
V
V
V
—
NTSC (M,
4.43)
60
—
—
—
—
—
—
V
PAL (B,G,H,I)
50
—
—
—
—
—
—
V
PAL
PAL (N)
50
—
—
—
—
—
—
V
PAL (M)
60
—
—
—
—
—
—
V
SECAM
SECAM (M)
50
—
—
—
—
—
—
V
480i
60
—
V
V
V
V
V
—
576i
50
—
V
V
V
V
V
—
480p
60
—
V
V
V
V
V
—
NTSC
SDTV
EDTV
HDTV
576p
50
—
V
V
V
V
V
—
1080i
25
—
V
V
V
V
V
—
1080i
29
—
V
V
V
V
V
—
1080i
30
—
V
V
V
V
V
—
720p
50
—
V
V
V
V
V
—
720p
59
—
V
V
V
V
V
—
720p
60
—
V
V
V
V
V
—
1080p
23
—
V
V
V
V
V
—
1080p
24
—
V
V
V
V
V
—
1080p
25
—
V
V
V
V
V
—
—
71 —
DLP Projector — Owner’s Manual
Signal
Type
HDTV
Resolution
Frame
(Hz)
rate
QD881
VGA
Component
HDMI
DVI
HDBaseT
1080p
29
—
V
V
V
V
V
1080p
30
—
V
V
V
V
V
1080p
50
—
V
V
V
V
V
1080p
59
—
V
V
V
V
V
1080p
60
—
V
V
V
V
V
V : Frequency supported
— : Frequency not supported
Projector Dimensions
213.2mm
389.9mm
452.8mm
—
72 —
Composite
DLP Projector — Owner’s Manual
Regulatory Compliance
FCC Warning
This equipment has been tested and found to comply with the limits for a Class A digital device pursuant
to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful
interference when the equipment is operated in a commercial environment.
This equipment generates, uses, and can radiate radio frequency energy and, if not installed and used
in accordance with the instruction manual, may cause harmful interference to radio communications.
Operation of this equipment in a residential area is likely to cause harmful interference in which case the
user will be required to correct the interference at his/her own expense.
Changes or modifications not expressly approved by the parties responsible for compliance could void the
user’s authority to operate the equipment.
Caution
This device complies with RG2 of IEC 62471:2006. Possibly hazardous optical radiation emitted from
this product. Do not stare at operating beam. May be harmful to the eye.
Canada
This class A digital apparatus complies with Canadian ICES-003.
Safety Certifications
CB, CCC, cTUVus, FCC, CE, KC/KCC, EAC
—
73 —
U.S.A.
Canada
EIKI International, Inc.
30251 Esperanza
Rancho Santa Margarita
CA 92688-2132
U.S.A.
Tel: +1 800-242-3454 +1 949-457-0200
Fax: +1 800-457-3454 +1 949-457-7878
E-Mail: usa@eiki.com
EIKI CANADA - Eiki International, Inc.
P.O. Box 156, 310 First St. - Unit 2,
Midland, ON, L4R 4K8, Canada
Tel: +1 800-563-3454
+1 705-527-4084
E-Mail: canada@eiki.com
Deutschland & Österreich
Eastern Europe
EIKI Deutschland GmbH
Am Frauwald 12
65510 Idstein
Deutschland
Tel: +49 6126-9371-0
Fax: +49 6126-9371-11
E-Mail: info@eiki.de
EIKI CZECH SPOL. s.r.o.
Nad Cementárnou 1163/4a
Praha 4, Podolí
147 00
Czech Republic
Tel: +420 241-410-928
+420 241-403-095
Fax: +420 241-409-435
E-Mail: info@eiki.cz
South East Asia
Oceania
EIKI Industrial (M) Sdn Bhd
No. 11, Nouvelle Industrial Park,
Lorong Teknologi B, Taman Sains
Selangor 1, Kota Damansara PJU5,
47810 Petaling Jaya, Selangor Darul Ehsan,
Malaysia
Tel: +60 3-6157-9330
Fax: +60 3-6157-1320
E-Mail: sales@eiki.my
EIKI AUSTRALIA PTY LTD
Level 5, 11 Queens Road,
Melbourne, Victoria 3004
Tel: +61 03-8530-7048
Fax: +61 03-9820-5834
E-Mail: sales@eiki.net.au
China
Japan & Worldwide
EIKI (Shanghai) Co., Ltd.
LAKESIDE OASIS MIDDLE RING
BUSINESS CENTRE
Block 1,Room 606,
1628, Jin Sha Jiang Road
Shanghai, 200333
CHINA
Tel:
+86 21-3251-3993
Service Hot line: +86 21-3251-3995
Fax:
+86 21-3251-3997
E-mail: info@eiki-china.com
EIKI Industrial Company Limited.
6-23 Teramoto, Itami-shi, Hyogo,
664-0026 JAPAN
Tel: +81 72-782-7492
Fax: +81 72-781-5435
WorldWide Website http://www.eiki.com