2008-2009_Australia-D-0826.qxd
08.8.27 0:37 PM
Page 9
SILVER BLACK
Microphone for
Audyssey
TX-SR706
THX® Select2 Plus™ Certified 7.1-Channel A/V Surround Home Theatre Receiver
In the mid-range category, credibility is gained through exceptional performance and a high degree of functionality.There’s no better example of this
than the THX Select2 Plus Certified TX-SR706 A/V receiver.With a certified amplification design and ability to process full high-definition audio and
video, the TX-SR706 marks the boundary between cost effectiveness and high-end functionality. Look to some notable firsts at this level: (1) Upscaling
of video signals to 1080p video with Faroudja DCDi Cinema; (2) An efficient push-pull amplification design originally created for Onkyo’s high-end
receivers; and (3) THX® Loudness Plus™ technology to maintain the impact of home theatre even at low volume.To cap off a remarkable home
entertainment component, we've also included RIHD system control, advanced Audyssey room acoustic correction technologies, and the option of
iPod connectivity.
• 175 W/Ch 6 Ω, 1 kHz, 1 Channel Driven, JEITA
• 160 W/Ch 6 Ω, 1 kHz, 1 Channel Driven, IEC
• 100 W/Ch Minimum into 8 Ω, 20 Hz–20 kHz, 0.08%,
2 Channels Driven, FTC
• THX Select2 Plus Certified
• Dolby® TrueHD, Dolby® Digital Plus, DTS-HD Master Audio™,
DTS-HD High-Resolution Audio™ Decoding
• H.C.P.S. (High Current Power Supply) Massive High Power
Transformer
• Cirrus Logic 192 kHz/24-Bit Audio DACs for All Channels
• HDMI™ (Version 1.3a to Support Deep Color™, x.v.Color™,
LipSync, Dolby TrueHD, DTS-HD Master Audio, DVD-Audio,
Super Audio CD)
• HDMI Audio and Video Processing (1080p; 4 Inputs and
1 Output)
• HDMI Video Upscaling (Up to 1080p) with Faroudja DCDi
Cinema™
• RIHD (Remote Interactive over HDMI) for System Control
• HDTV-Capable (720p/1080i) Component Video Switching
(2 Inputs and 1 Output)
• Push-Pull Amplifier Design with Three-Stage Inverted
Darlington Circuitry
• WRAT (Wide Range Amplifier Technology)
• Two TI (Aureus™) 32-Bit DSP Chips for Advanced Processing
• Audyssey MultEQ™ to Correct Room Acoustic Problems and
to Calibrate Speakers
• Audyssey Dynamic EQ™ for Loudness Correction
• 6 Digital Inputs (3 Optical and 3 Coaxial)
• Powered Zone 2 and Zone 2 Line-Out for Playback in
Another Room
• RS232, IR, and 12V Trigger Connectivity
• IntelliVolume
• Pure Audio Mode
• Bi-Amping Capability for Music and Movie Sound Effects
• Music Optimizer for Compressed Music Files
• Color-Coded 7.1-Multichannel Inputs and Pre Outs
• Independent Crossover Adjustment for F/C/S/SB
(40/50/60/70/80/90/100/120/150/200 Hz)
• Newly Designed GUI for System Set-up
• Compatible with RI (Remote Interactive) Dock for the iPod
• Newly Designed Preprogrammed RI (Remote Interactive)
Remote Control with Macros and Mode-Key LEDs
Home Theatre Components
9
2008-2009_Australia-D-0826.qxd
08.8.27 0:37 PM
Page 10
(July Issue 2008)
SILVER BLACK
Microphone for
Audyssey
TX-SR606
7.1-Channel A/V Surround Home Theatre Receiver
The award-winning TX-SR606 stands on top of the world with its outstanding functionality and flexibility.This A/V receiver provides high-definition
video and audio processing for up to four source components—another first for Onkyo at this level. From Blu-ray Disc players and PlayStation® 3 to
digital TV tuners, you have everything in the digital realm covered. Apart from 1080p video, the TX-SR606 will upscale to 1080i all analog video signals—
from component video, S-Video, and composite video inputs—for output via HDMI. Onkyo’s own RIHD also gives you inter-operability with the
displays and playback components from other leading brands. And with an expanded version of Audyssey’s room correction technology, the TX-SR606
maintains the fullness of surround sound audio quality at low volume levels.The TX-SR606 offers all-round excellence rarely seen at this level.
• 175 W/Ch 6 Ω, 1 kHz, 1 Channel Driven, JEITA
• 140 W/Ch 6 Ω, 1 kHz, 1 Channel Driven, IEC
• 90 W/Ch Minimum into 8 Ω, 20 Hz–20 kHz, 0.08%,
2 Channels Driven, FTC
• Dolby® TrueHD, Dolby® Digital Plus, DTS-HD Master Audio™,
DTS-HD High-Resolution Audio™ Decoding
• H.C.P.S. (High Current Power Supply) Massive High Power
Transformer
• 192 kHz/24-Bit Audio DACs for All Channels
• HDMI™ (Version 1.3a to Support Deep Color™, x.v.Color™,
LipSync, Dolby TrueHD, DTS-HD Master Audio, DVD-Audio,
Super Audio CD)
• HDMI Audio and Video Processing (1080p; 4 Inputs and
1 Output)
• HDMI Video Upscaling (Up to 1080i) with Faroudja DCDi
Edge™*
10
Home Theatre Components
• RIHD (Remote Interactive over HDMI) for System Control
• HDTV-Capable (720p/1080i) Component Video Switching
(2 Inputs and 1 Output)
• WRAT (Wide Range Amplifier Technology)
• Advanced TI (Aureus™) 32-Bit Processing DSP Chip
• Audyssey 2EQ™ to Correct Room Acoustic Problems and to
Calibrate Speakers
• Audyssey Dynamic EQ™ for Loudness Correction
• 4 Digital Inputs (2 Optical and 2 Coaxial)
• 4 S-Video Inputs and 2 Outputs
• CinemaFILTER™
• Pure Audio Mode
• Powered Zone 2 and Zone 2 Line-Out for Playback in
Another Room
• IntelliVolume
• Bi-Amping Capability for Music and Movie Sound Effects
• Optimum Gain Volume Circuitry
• Music Optimizer for Compressed Music Files
• Independent Crossover Adjustment for F/C/S/SB
(40/50/60/80/100/120/150/200 Hz)
• Newly Designed GUI for System Set-up
• Theater-Dimensional Virtual Surround Function
• Color-Coded 7.1-Multichannel Inputs
• Color-Coded Banana Plug-Compatible Speaker Posts
• Compatible with RI (Remote Interactive) Dock for the iPod
• Newly Designed Preprogrammed RI (Remote Interactive)
Remote Control with Mode-Key LEDs
*From component video, S-Video, and composite video inputs via HDMI output
2008-2009_Australia-D-0826.qxd
08.8.27 0:37 PM
Page 11
SILVER BLACK
Microphone for
Audyssey
TX-SR576
7.1-Channel A/V Surround Home Theatre Receiver
Bringing both high-definition audio and video into an entry-level Onkyo A/V receiver for the first time, the TX-SR576 breaks barriers that were thought
impregnable just a short time ago.Thanks to the TX-SR576’s HDMI platform, this receiver stands out with three masterful high-def advantages: (1) The ability to
switch three 1080p video sources; (2) The scope to handle enhanced Dolby Digital Plus encoded audio; and (3) The capability to integrate and operate compatible
components from the leading consumer electronics brands. In recognition of the need for home theatre to adapt to spacious living rooms as well as to cozy
apartment spaces, the TX-SR576 features new Audyssey technologies that let you tailor surround sound to your home and ensure an enveloping soundscape,
even at low volumes.When it comes to digital music, this receiver draws on Onkyo’s own technology to spark life into digital audio files such as MP3s.
• 160 W/Ch 6 Ω, 1 kHz, 1 Channel Driven, JEITA
• 130 W/Ch 6 Ω, 1 kHz, 1 Channel Driven, IEC
• 80 W/Ch Minimum into 8 Ω, 20 Hz–20 kHz, 0.08%,
2 Channels Driven, FTC
• Dolby® Digital Plus Decoding (including Dolby® Digital EX™
and Dolby® Pro Logic® IIx)
• DTS-ES™ Discrete/Matrix, DTS Neo:6®, DTS 96/24™ Decoding
• H.C.P.S. (High Current Power Supply) Massive High Power
Transformer
• 192 kHz/24-Bit Audio DACs for All Channels
• HDMI™ (Version 1.3a to Support x.v.Color™, Dolby Digital
Plus, LipSync, and CEC)
• HDMI Video Switching (1080p) and Audio Processing (3 Inputs
and 1 Output)
• RIHD (Remote Interactive over HDMI) for System Control
• HDTV-Capable (720p/1080i) Component Video Switching
(2 Inputs and 1 Output)
• WRAT (Wide Range Amplifier Technology)
• Advanced TI (Aureus™) 32-Bit Processing DSP Chip
• Audyssey 2EQ™ to Correct Room Acoustic Problems and to
Calibrate Speakers
• Audyssey Dynamic EQ™ for Loudness Correction
• 4 Digital Inputs (2 Optical and 2 Coaxial)
• 3 S-Video Inputs and 2 Outputs
• Subwoofer Pre Out
• CinemaFILTER™
• Pure Audio Mode
• Powered Zone 2 and Zone 2 Line-Out for Playback in
Another Room
• Bi-Amping Capability for Music and Movie Sound Effects
• Optimum Gain Volume Circuitry
• Music Optimizer for Compressed Music Files
• Theater-Dimensional Virtual Surround Function
• Tone Control (Bass/Treble) for Front L/R Channels
• Double Bass Function
• Color-Coded 7.1-Multichannel Inputs
• Color-Coded Banana Plug-Compatible Speaker Posts (Except
Zone 2)
• Crossover Adjustment at 40/50/60/80/100/120/150/200 Hz
for Bass Management
• A/V Synchronization Function (Up to 100 ms in 20 ms Steps)
• 40 FM/AM Radio Presets
• Compatible with RI (Remote Interactive) Dock for the iPod
• Newly Designed Preprogrammed RI (Remote Interactive)
Remote Control with Mode-Key LEDs
Home Theatre Components
11
2008-2009_Australia-D-0826.qxd
TX-SR304E
08.8.27 0:37 PM
Page 12
5.1-Channel A/V Surround Home Theatre Receiver
SILVER BLACK
• 120 W/Ch, 6 Ω, 1 kHz, 1 Channel Driven, JEITA
• 100 W/Ch, 6 Ω, 1 kHz, 1 Channel Driven, IEC
• 65 W/Ch Continuous 8 Ω, 20 Hz–20 kHz, 2 Channels Driven, FTC
• DTS®, DTS Neo:6® 5.1, Dolby® Digital, Dolby® Pro Logic® II
• H.C.P.S. (High Current Power Supply) Massive High Power Transformer
• 192 kHz/24-Bit DACs for All Channels
• HDTV-Capable (720p/1080i) Component Video Switching (3 Inputs
and 1 Output)
• Advanced 32-Bit Processing DSP Chip
• 3 Digital Inputs (2 Optical and 1 Coaxial)
• 4 A/V Inputs and 1 Output
• 2 Audio Inputs and 1 Output
• Subwoofer Pre Out
• CinemaFILTER™
• Direct Mode
• A-Form Listening Mode Memory
• Optimum Gain Volume Circuitry
• Tone Control (Bass/Treble) for Front L/R Channels
• Double Bass Function
• Color-Coded 5.1 Multichannel Inputs (Receive 5.1
Surround Sound from Compatible Blu-ray Disc Players)
• Speaker A/B Drive
• Color-Coded Speaker Terminals
• Crossover Adjustment (40/50/60/80/100/120/150/200 Hz)
• A/V Sync Control Function (Fixed at 0/20/40 ms)
• Compatible with RI Dock for the iPod
• RI (Remote Interactive) Remote with Mode-Key LEDs
A Completely New Onkyo Player Range
—Providing a Reliable, Quality Solution for Every Scenario
HDMI™ (High-Definition Multimedia Interface) Providing
the Ultimate A/V Connection (DV-CP706, DV-SP506,
DV-SP406)
You’ll find HDMI on all recently released Onkyo players.
HDMI will output high-def, standard-def, and upscaled
video signals directly to your display, projector, or A/V
receiver. For all your video needs, only one cable is needed
to plug into your HDMI-enabled Onkyo player and only
one into the display device.This means less unsightly cable
mess and a straightforward connection process.
1080p Video Upscaling for High-Definition Video
Resolution (DV-CP706, DV-SP506, DV-SP406)
If you’ve already invested in an HDTV, or are planning to in the near future, a
1080p upscaling Onkyo player is the perfect vehicle for getting the best from
your display.You can either watch your video source in its native resolution, or
you can upscale it to 1080p video resolution.You have the best of both
worlds, even from your standard definition DVD discs.
Multi-Format Playback Capability* (DV-CP706, DV-SP506,
DV-SP406)
From DVD videos to audio CDs, Onkyo players enable playback of a range
of formats.You can even play multichannel DVD-Audio and Super Audio CD,
high resolution audio formats preferred by the audiophile. On a different
level, MP3-, WMA-, and AAC-encoded music discs can be played back with a
fuller sound, and with energy lacking on PCs and portable music devices. Also,
you can easily transfer DivX®-encoded
video files from your computer to your
home theatre. Likewise, your JPEG files
look stunning when played back on a
large screen.
*Capability depends on specific model.
12
Home Theatre Components
VLSC (Vector Linear Shaping Circuitry) (DV-CP706,
DV-SP506)
Unlike what you’ll find elsewhere, Onkyo’s VLSC significantly reduces pulse
noise from digital signals. If you think of your player as the first link in your
home entertainment chain, it makes sense to ensure that the signal is
delivered in all its purity. By doing so, you’ll add
more depth and clarity to all your music sources
(including digital music files) and movie
soundtracks.
USB Interface for Transferring Audio and JPEG Files
(DV-SP406)
With the front-panel slot for USB mass storage devices on compatible Onkyo
players, you can access audio files (MP3 and WMA) and JPEG photo files.
When you connect the device, you can use the Disc Navigator function to
play back your files exactly as you would with content burned to disc. If
you’re already purchasing music online, or have your
picture files stored on your computer, the USB interface
is a convenient way of transferring your files.
RIHD (Remote Interactive over HDMI) for System
Integration with RIHD-Compatible Onkyo A/V Receivers
and Brand-Name Displays (DV-CP706, DV-SP506)
Onkyo's RIHD system control function enables easy integration with
compatible Onkyo A/V receivers and leading-brand displays, including selected
Sharp models and models with Panasonic VIERA Link™ capability. RIHD
functionality allows your system to be connected via
HDMI, for straightforward integration and operation of
multiple components.
2008-2009_Australia-D-0826.qxd
DV-SP406
08.8.27 0:37 PM
Page 13
1080p Upscaling DVD/CD/MP3 Player
SILVER BLACK
• DTS Digital Out® and Dolby® Digital
• Plays DVD Video,Video CD, DualDisc (Not DVD-Audio), Audio CD,
CD-R/RW, DVD-R/RW, DVD+R/RW*
• Plays MP3,WMA, DivX, and JPEG Formats
• HDMI™ Digital Interface
• 1080p Video Upscaling (via HDMI Output)
• Front-Panel USB Port
• Component Video, S-Video, and Composite Video Outputs
• 108 MHz/14-Bit Video DAC
• 192 kHz/24-Bit Audio DAC
• Disc Navigator for Browsing Video and Audio Content (Including WMA,
MP3, DivX Video, and JPEG)
• Coaxial and Optical Digital Outputs
• High-Resolution Onscreen Display (English, French, Spanish, German, Italian,
Portuguese, Dutch, Polish, Russian, Chinese Mandarin, Cantonese, Japanese,
Thai,Vietnamese, Indonesian)
• Full-Function Remote Control
*Discs that have not been properly finalized may only be partially playable or not playable at all.
DV-SP506
1080p Upscaling Super Audio CD and DVD Audio/Video Player
SILVER BLACK
• DTS Digital Surround® and Dolby® Digital
• Plays DVD Video, Super Audio CD, DVD Audio, Audio CD, CD-R/RW,
DVD-R/RW, DVD+R/RW, DVD-R DL, DVD+R DL*1
• Plays MP3,WMA, DivX, and JPEG Formats (with HD JPEG Resolution
via HDMI)
• HDMI™ Digital Interface
• 5.1 PCM Multichannel Audio Output and Direct Stream Digital (DSD)
via HDMI
• 1080p Video Upscaling (via HDMI Output)
• VLSC (Vector Linear Shaping Circuitry)
• 108 MHz/14-Bit Video DAC
• Three Burr-Brown 192 kHz/24-Bit Audio DACs
• RIHD (Remote Interactive over HDMI) for System Integration
• Disc Navigator for Browsing Video and Audio Content (Including WMA,
MP3, DivX Video and JPEG)
• Simultaneous Output from All Video Connections*2
• 480i Video Output for Processing by Advanced Scaling Devices
• Component (480i/480p), S-Video, and Composite (480i) Video Outputs
• Coaxial and Optical Digital Outputs
• Elastomer Base for Disc Drive to Protect Internal Circuitry from Vibrations
• Onscreen Display (English, French, Spanish, Italian, German, Japanese)
• Displays ID3 Tags for MP3 and WMA Files
• RI (Remote Interactive) Remote Control
*1 Discs that have not been properly finalized may be only partially playable or not playable at all.
*2 Depending on setting.
DV-CP706
1080p Upscaling DVD/CD/MP3 6-Disc Carousel Changer
SILVER BLACK
• DTS Digital Out® and Dolby® Digital
• Plays DVD Video, Audio CD, CD-R/RW, DVD-R/RW, DVD+R/RW,
DVD-R DL, DVD+R DL*1
• Plays MP3,WMA, and JPEG Formats (with HD JPEG Resolution via HDMI)
• HDMI™ Digital Interface
• 1080p Video Upscaling (via HDMI Output)
• Exclusive Onkyo 6-Disc Carousel Changer Mechanism
• Change Up to 5 Discs During Play
• VLSC (Vector Linear Shaping Circuitry)
• 108 MHz/14-Bit Video DAC
• 192 kHz/24-Bit Audio DAC
• RIHD (Remote Interactive over HDMI) for System Integration
• Disc Navigator for Browsing Video and Audio Content (Including MP3,
WMA, and JPEG)
• Simultaneous Output from All Video Connections*2
• 480i Video Output for Processing by Advanced Scaling Devices
• Component (480i/480p), S-Video, and Composite (480i) Video Outputs
• Coaxial and Optical Digital Outputs
• Isolated Circuit Layout to Minimize Digital Noise
• Ultra-Quiet Loading Mechanism
• Onscreen Display (English, French, Spanish)
• Displays ID3 Tags for MP3 and WMA Files
• RI (Remote Interactive) Remote Control
*1 Discs that have not been properly finalized may be only partially playable or not playable at all.
*2 Depending on setting.
Home Theatre Components
13
2008-2009_Australia-D-0826.qxd
08.8.27 0:37 PM
Page 14
VL Digital—A Unique Approach to Digital Audio Advancement
The Difference Between Analog and Digital Amplifiers
Understanding the amplification process helps to explain the difference
between analog and digital amplifiers. In an analog amplifier, the analog input
signal is amplified without any modification. In a digital amplifier, the analog
input signal is converted
into a pulse (digital) signal,
and then converted back
into an analog signal using a
low-pass filter. An analog
signal is constantly changing
within a range extending
from zero to a maximum
value. However, a digital
signal is comprised of
“pulses”—a series of zeros
and ones.The significant
difference between analog
and digital amplifiers is the
basic principle used for
amplification.
In an amplifier, the power supply circuitry (actually, the capacitors) collects
electricity. A transistor (valve) opens when an input signal is received, causing
some of the collected energy to flow out through the output jacks.This
process simply defines how amplification works. Analog amplifier signals
continuously change: the transistor must adjust the size of the “valve” opening
to match the constantly changing input signal. On the other hand, with a
digital amplifier, the signal consists of either a pulse (1) or no pulse (0)—there
are no intermediate values.The “switches” in a digital amplifier are completely
open (switch is on) when there is a pulse or completely closed (switch is off)
when there is no pulse.
Another potential attraction is that low-frequency reproduction places little
load on the power supply. Analog recording techniques have limitations when
recording low-frequency sounds. However, digital recording, which has
become the dominant method for storing and reproducing audio data, has
eliminated these limitations. For this reason, more and more of today’s music
is based on powerful low-frequency sounds.These recordings contain bass
power in all its intensity.
Onkyo’s Approach to Digital Amplifiers
Based on the research of Onkyo’s development team, we believe power
supply is essential to achieving quality sound from digital amplifiers, even
though their efficiency far exceeds that of analog amplifiers. If we go back to
the basics of amplification, we want to reproduce sound that you can feel, not
just hear. For this purpose, we need a power supply with the lowest possible
impedance and superior transient response.Very few manufacturers are
building digital amplifiers with power supplies that follow our concept.
A great deal of attention has been given to power supply performance in
every Onkyo digital amplifier. In fact, in our digital amplifiers, we have taken
this concept even further by including large-capacity transformers.
Pulse Width Modulation (PWM) and Onkyo’s VL (Vector
Linear) Digital
In digital amplifiers, there are two methods of pulse conversion: pulse width
modulation (PWM), in which analog quantity is represented by the width of
the pulse, and pulse density modulation (PDM), in which analog is
represented by the number of pulses. Onkyo uses the PWM approach for a
number of reasons:
1) PWM produces far less digital noise in the higher frequencies than PDM.
2) PWM is more efficient than PDM in terms of delay relative to the pulse input.
3) PDM is dependent on a large amount of negative feedback (NFB)—approaching 100%. Even in an
analog amplifier, a lot of NFB will negatively affect the sound.
Why the Interest in Digital Amplifiers?
First of all, we should consider an analog amplifier, where the signal always lies
between zero and a maximum value.Therefore, the amplifier elements
function as variable resistors that adjust the amount of electricity supplied by
the power supply to match the input level. Electricity that does not flow
through when the amplifier elements are closed is lost. For this reason, analog
amplifiers can only achieve a maximum power efficiency (relative to the
power supply) of about 70%.This large amount of energy loss means that a
substantial amount of heat is generated.
In a digital amplifier, the signal level is either 0 or 1, and the amplifier elements
function as switches with two states, ON and OFF.The amount of power loss
is very small. Consequently, digital amplifiers typically have very high
efficiency—90% or so.Very little energy is generated, so heat-dissipating parts
such as heat sinks can be smaller and the amplifiers can be more compact.
Possibilities of the Digital Amplifier
At Onkyo, we are not only interested in higher efficiency and a more
compact size, we also believe that there is a great opportunity to build a
digital amplifier with improved sound. When a digital amplifier’s signal value is
1 (the current is flowing from the power supply to the speakers), the
amplification elements in the output stage remain completely open. Broadly
speaking, there is little resistance that consumes power between the power
supply and the speakers. Consequently, there is no loss of power. In contrast,
with analog amplifiers, there is always some resistance between the power
supply and speakers because of the manner in which the amplifier operates.
Furthermore, since the output elements are used as switches in a digital
amplifier, properties such as linearity (crucial in an analog amplifier) are not
particularly significant. By reducing the number of parameters that the
amplifier must control, it is easier to ensure that the elements will be driven
as intended in all circumstances. We believe that the potential of digital
amplifiers lies in more accurate signal reproduction.
14
Pure Hi-Fi Components
Up to now, PWM has been used as an efficient method of amplifying audio
signals.Theoretically, this method should
result in accurate analog-to-digital
conversion. In reality, a digital amplifier
generates a lot of “noise spikes” from
sources external to the modulator circuitry.
This spike noise introduces errors into the
inversion timing, making accurate conversion
into pulse widths impossible. So, to further
improve the precision of amplifiers, we’ve
had to push even further. Our response is a
highly accurate analog-to-digital conversion
circuit—VL Digital—that is unaffected by
noise in the analog signal.
Onkyo’s VL (Vector Linear) Digital technology comprises a vector generator,
an integrator (like a charger) and an inversion trigger generator. When the
analog input signal is received, the vector generator outputs a current
proportional to the size of the analog input.This current is sent to the
integrator, where it is “charged”. When the charge quantity reaches a specified
value, the trigger operates and inverts the output pulse. Circuits charge and
invert alternately, performing pulse width modulation proportional to the
analog signal.
The upper and lower portions of the spike noise waveform are symmetrical,
so they have the same area.Therefore, if the analog signal contains spike
noise, their charge quantities will cancel each other out.This will ensure
accurate pulse width
modulation at all times.
Onkyo’s third-generation VL
Digital technology includes
an inverted Darlington
circuit that goes beyond
earlier versions to accurately
produce a current flow
based on the input voltage.
2008-2009_Australia-D-0826.qxd
A-9755
08.8.27 0:39 PM
Integrated Digital Amplifier
Page 15
SILVER BLACK
• 300 W/Ch into 4 Ω, 1 kHz, JEITA
• Exclusive Onkyo VL Digital Technology
• Pure Stream Power Supply (2 Transformers)
• All Discrete Output Stage Circuitry
• Low-Impedance,Thick Bus Plate
• Optimum Gain Volume Circuitry
• Audiophile-Grade Capacitor
• Precision Motor-Driven Volume Control
• Tone Control (Bass,Treble, Loudness On/Off)
• Pure Direct Mode
• Discrete Phono Equalizer Circuitry
• 6 Gold-Plated Audio Inputs and 2 Outputs
• Phono Input
• Main In Terminals
• Blue Illuminated Volume Control
• High-Rigidity, Anti-Resonant Chassis and Brass Stabilizers
• Extruded Aluminum Volume and Selector Knobs
• Speaker A/B Drive
• Gold-Plated Banana Plug-Compatible Transparent Speaker Posts
• Heavy-Duty Power Cord (Inlet Type)
• Compatible with RI Dock for the iPod
• RI (Remote Interactive) Remote Control
• WHD: 435 x 144 x 431 mm
• 17.6 kg
A-9555
Integrated Digital Amplifier
SILVER BLACK
• 200 W/Ch into 4 Ω, 1 kHz, JEITA
• Exclusive Onkyo VL Digital Technology
• Pure Stream Power Supply
• All Discrete Output Stage Circuitry
• Low-Impedance,Thick Bus Plate
• Optimum Gain Volume Circuitry
• Audiophile-Grade Capacitor
• Precision Motor-Driven Volume Control
• Tone Control (Bass,Treble, Loudness On/Off)
• Pure Direct Mode
• Discrete Phono Equalizer Circuitry
• 6 Audio Inputs and 2 Outputs
• Phono Input
• High-Rigidity, Anti-Resonant Chassis
• Aluminum Volume and Selector Knobs
• Speaker A/B Drive
• Banana Plug-Compatible Speaker Posts
• Heavy-Duty Power Cord (Inlet Type)
• Compatible with RI Dock for the iPod
• RI (Remote Interactive) Remote Control
• WHD: 435 x 148 x 431 mm
• 13.0 kg
A-9355
BLACK
Integrated Digital Amplifier
• 85 W/Ch into 4 Ω, 1 kHz, JEITA
• Exclusive Onkyo VL Digital Technology
• Massive Power Transformer
• All Discrete Output Stage Circuitry
• Low-Impedance,Thick Bus Plate
• Optimum Gain Volume Circuitry
• Audiophile-Grade Capacitor
• Precision Motor-Driven Volume Control
• Tone Control (Bass,Treble, Loudness On/Off)
• Pure Direct Mode
• Discrete Phono Equalizer Circuitry
• 5 Audio Inputs and 2 Outputs
• Phono Input
• High-Rigidity, Anti-Resonant Chassis
• Aluminum Volume and Selector Knobs
• Speaker A/B Drive
• Banana Plug-Compatible Speaker Posts
• Gold-Plated Headphone Jack
• Compatible with RI Dock for the iPod
• RI (Remote Interactive) Remote Control
• WHD: 435 x 124 x 344 mm
• 7.3 kg
Pure Hi-Fi Components
15
2008-2009_Australia-D-0826.qxd
TX-8555
08.8.27 0:39 PM
Stereo Receiver
Page 16
BLACK
• 130 W/Ch, 4 Ω, 1 kHz, JEITA
• WRAT (Wide Range Amplifier Technology)
• High-Current, Low-Impedance Drive
• Discrete Output Stage Circuitry
• Massive Power Transformer
• 2 Audio and 4 A/V Inputs
• Phono Input
• 1 Audio and 1 A/V Output
• Zone 2 Pre Out
• Subwoofer Pre Out
• IR Input and Output
• 40 FM/AM Presets
• Preset Station Naming (Up to 8 Characters)
• Direct Access Tuning
• Pure Audio Mode
• Speaker A/B Drive
• Brushed Hairline Aluminum Front Panel
• Compatible with RI Dock for the iPod
• RI (Remote Interactive) Remote Control
• WHD: 435 x 149 x 340 mm
• 8.5 kg
T-4355
FM/AM Tuner
BLACK
• FM/AM Auto and Manual Tuning
• Auto Presets (20 FM/10 AM)
• FM Mono Mode
• Dot-Matrix Display
• Front Panel Controls (Display, Band, Preset, Memory, FM Mode)
• Hi-Rigidity, Anti-Resonant Chassis
• Aluminum Front Panel
• Audiophile-Grade Capacitor
• RI (Remote Interactive) System Compatible
• WHD: 435 x 81 x 310 mm
• 3.2 kg
DX-7355
CD Player
• Plays Audio CDs, MP3-Encoded CDs, CD-R/RWs*
• VLSC (Vector Linear Shaping Circuitry)
• Wolfson® (WM8716) 192 kHz/24-Bit DAC
• Massive Power Transformer
• Audiophile-Grade Capacitors
• 2 Digital Outputs (Optical and Coaxial)
• Headphone Jack with Volume Control
• Quick Navigation for MP3 CD Playback
• 4 Play Modes (Group [MP3 CD only]/Memory/Random/Normal)
• 25-Step Memory Playback
• 5 Repeat Modes (1 Group/Memory/Random/Entire Disc/1 Track)
• 3-Mode Dimmer (Normal/Dim/Dimmer)
• High-Rigidity, Anti-Resonant Chassis
• Brushed Hairline Aluminum Front Panel
• RI (Remote Interactive) Remote Control
• WHD: 435 x 81 x 315 mm
• 4.4 kg
* Discs that have not been properly finalized may only be partially playable or not
playable at all.
16
Pure Hi-Fi Components
BLACK