QuickSpecs
HP 1910 Switch Series
Overview
Models
HP 1910-48G Switch
HP 1910-24G-PoE (365 W) Switch
HP 1910-24G-PoE (170 W) Switch
HP 1910-24G Switch
HP 1910-16G Switch
HP 1910-8G Switch
HP 1910-8G-PoE+ (65W) Switch
HP 1910-8G-PoE+ (180W) Switch
HP 1910-24 Switch
HP 1910-8 Switch
HP 1910-48 Switch
HP 1910-8-PoE+ Switch
HP 1910-24-PoE+ Switch
JE009A
JE007A
JE008A
JE006A
JE005A
JG348A
JG349A
JG350A
JG538A
JG536A
JG540A
JG537A
JG539A
Key features
Customized operation using intuitive Web interface
Layer 3 static routing with 32 routes for network segmentation and expansion
Access control lists for granular security control
Spanning Tree: STP, RSTP, and MSTP
Lifetime warranty
Product overview
The HP 1910 Switch Series are advanced smart-managed fixed-configuration Gigabit and Fast Ethernet switches
designed for small businesses in an easy-to-administer solution. By utilizing the latest design in silicon technology, this
series is one of the most power-efficient in the market.
The series has 13 models: eight gigabit and five Fast Ethernet. 8-, 16-, 24-, and 48-port 10/100/1000 models are equipped
with additional Gigabit SFP ports for fiber connectivity; in addition to non-PoE models, the 8- and 24-port gigabit models
are available with two different levels of PoE, or without. The 10/100 models are available with 8, 24 and 48 ports, and
come with two additional combo uplink ports; the 8- and 24-port fast ethernet models are available with or without PoE.
The HP 1910 Switch Series is a great value, with features to satisfy even the most advanced small business network. All
models support rack mounting or desktop operation. Customizable features include basic layer 2 features like VLANs and
link aggregation as well as advanced features such as Layer 3 static routing, IPv6, ACLs and Spanning Tree Protocols.
These switches come with a lifetime warranty covering the unit, fans, power supplies and 24X7 phone support for first
three years.
Features and benefits
Management
Simple Web management
allows for easy management of the switch- even by nontechnical users- through an intuitive Web GUI; http and
secure http (https) is supported
Single IP management
enables management of up to four HP 1910 devices using a single Web interface; simplifies management of multiple
devices
Secure Web GUI
provides a secure, easy-to-use graphical interface for configuring the module via HTTPS
SNMPv1, v2c, and v3
DA - 13677 Worldwide QuickSpecs — Version 13 — 2.25.2014
Page 1
QuickSpecs
HP 1910 Switch Series
Overview
facilitates management of the switch, as the device can be discovered and monitored from an SNMP management
station
Complete session logging
provides detailed information for problem identification and resolution
Dual flash images
provides independent primary and secondary operating system files for backup while upgrading
Port mirroring
enables traffic on a port to be simultaneously sent to a network analyzer for monitoring
Management security
restricts access to critical configuration commands; offers multiple privilege levels with password protection; ACLs
provide telnet and SNMP access; local and remote syslog capabilities allow logging of all access
Network Time Protocol (NTP)
synchronizes timekeeping among distributed time servers and clients; keeps timekeeping consistent among all
clock-dependent devices within the network so that the devices can provide diverse applications based on the
consistent time
IEEE 802.1AB Link Layer Discovery Protocol (LLDP)
advertises and receives management information from adjacent devices on a network, facilitating easy mapping by
network
management applications
Limited CLI
enables users to quickly deploy and troubleshoot devices in the network
RMON
provides advanced monitoring and reporting capabilities for statistics, history, alarms, and events
Default DHCP client mode
allows the switch to be directly connected to a network, enabling plug-and-play operation; in absence of DHCP
server on the network, the switch will fallback to a unique static address determined by the MAC address of the
switch
Quality of Service (QoS)
Broadcast control
allows limitation of broadcast traffic rate to cut down on unwanted network broadcast traffic
Rate limiting
sets per-port ingress enforced maximums and per-port, per-queue minimums
Traffic prioritization
provides time-sensitive packets (like VoIP and video) with priority over other traffic based on DSCP or IEEE 802.1p
classification; packets are mapped to four hardware queues for more effective throughput
Connectivity
IPv6
IPv6 host
enables switches to be managed and deployed at the IPv6 network's edge
IPv6 routing
supports IPv6 static routes
MLD snooping
forwards IPv6 multicast traffic to the appropriate interface, preventing traffic flooding
IPv6 ACL/QoS
supports ACL and QoS for IPv6 network traffic
Auto-MDI/MDIX
adjusts automatically for straight-through or crossover cables on all 10/100/1000 ports
IEEE 802.3X flow control
provides a flow throttling mechanism propagated through the network to prevent packet loss at a congested node
IEEE 802.3af Power over Ethernet (PoE) ready
provides up to 15.4 W per port to power standards-compliant IP phones, wireless LAN access points, Web cameras,
and more (all PoE models)
IEEE 802.3at Power over Ethernet (PoE+)
provides up to 30 W per port which allows support of the latest PoE+-capable devices such as IP phones, wireless
DA - 13677 Worldwide QuickSpecs — Version 13 — 2.25.2014
Page 2
QuickSpecs
HP 1910 Switch Series
Overview
access points, and security cameras, as well as any IEEE 802.3af-compliant end device; eliminates the cost of
additional electrical cabling and circuits that would otherwise be necessary in IP phone and WLAN deployments.
(Note: applies to all PoE models, except the two 24G-PoE models which support a pre-standard implementation of
PoE+)
Packet storm protection
protects against broadcast, multicast, or unicast storms with user-defined thresholds
Cable diagnostics
detects cable issues remotely, using a browser-based tool
Security
Advanced access control lists (ACLs)
enables network traffic filtering and enhances network control using MAC- and IP-based ACLs; time-based ACLs
allow for greater flexibility with managing network access
Secure Sockets Layer (SSL)
encrypts all HTTP traffic, allowing secure access to the browser-based management GUI in the switch
IEEE 802.1X and RADIUS network logins
controls port-based access for authentication and accountability
Automatic VLAN assignment
assigns users automatically to the appropriate VLAN based on their identity, location and time of day
STP BPDU port protection
blocks Bridge Protocol Data Units (BPDUs) on ports that do not require BPDUs, preventing forged BPDU attacks
STP root guard
protects the root bridge from malicious attacks or configuration mistake
Automatic denial-of-service protection
monitors for malicious attacks and protects the network by blocking the attacks
Management password
provides security so that only authorized access to the Web browser interface is allowed
Performance
Half-/full-duplex auto-negotiating capability on every port
doubles the throughput of every port
Selectable queue configurations
allows for increased performance by selecting the number of queues and associated memory buffering that best
meet the requirements of the network applications
IGMP snooping
improves network performance through multicast filtering, instead of flooding traffic to all ports
Fiber uplink
provides greater distance connectivity using Gigabit fiber uplinks
Layer 2 switching
VLAN support and tagging
supports IEEE 802.1Q (4,094 VLAN IDs) and 256 VLANs simultaneously
Spanning Tree Protocol (STP)
supports standard IEEE 802.1D STP, IEEE 802.1w Rapid Spanning Tree Protocol (RSTP) for faster convergence,
and IEEE 802.1s Multiple Spanning Tree Protocol (MSTP)
BPDU filtering
drops BPDU packets when STP is enabled globally but disabled on a specific port
Jumbo frame support
supports up to 10 kilobyte frame size to improve the performance of large data transfers
Layer 3 services
Address Resolution Protocol (ARP)
determines the MAC address of another IP host in the same subnet; supports static ARPs; gratuitous ARP allows
detection of duplicate IP addresses; proxy ARP allows normal ARP operation between subnets or when subnets are
separated by a Layer 2 network
DA - 13677 Worldwide QuickSpecs — Version 13 — 2.25.2014
Page 3
QuickSpecs
HP 1910 Switch Series
Overview
DHCP relay
simplifies management of DHCP addresses in networks with multiple subnets
Layer 3 routing
NEW Static IPv4/IPv6 routing
provides basic routing (supporting up to 32 static routes and 8 virtual VLAN interfaces); allows manual configuration
of routing
Resiliency and high availability
Available redundant power supply
provides additional PoE of up to 740 W for high-power applications like HP Gigabit Ethernet IntelliJack switches; the
HP RPS1600 Redundant Power System (JG136A), sold separately, is only for use with the 1910-24G-PoE (365W)
Switch model
Link aggregation
groups together multiple ports (up to a maximum of 2 ports) automatically using Link Aggregation Control Protocol
(LACP), or manually, to form an ultra-high-bandwidth connection to the network backbone; helps prevent traffic
bottlenecks
Convergence
LLDP-MED (Media Endpoint Discovery)
defines a standard extension of LLDP that stores values for parameters such as QoS and VLAN to automatically
configure network devices such as IP phones
PoE allocations
supports multiple methods (automatic, IEEE 802.3af class, LLDP-MED, or user-specified) to allocate PoE power for
more
efficient energy savings
Auto voice VLAN
recognizes IP phones and automatically assigns voice traffic to dedicated VLAN for IP phones
Additional information
Green initiative support
provides support for RoHS and WEEE regulation
Green IT and power
improves energy efficiency through the use of the latest advances in silicon development; shuts off unused ports and
utilizes variable-speed fans, reducing energy costs
Warranty and support
Lifetime Warranty 2.0
advance hardware replacement for as long as you own the product with next-business-day delivery (available in
most countries)†
Electronic and telephone support (for Lifetime Warranty 2.0)
limited 24x7 telephone support is available from HP for the first 3 years; limited electronic and business hours
telephone support is available from HP for the entire warranty period; to reach our support centers, refer to
www.hp.com/networking/contact-support; for details on the duration of support provided with your product
purchase, refer to www.hp.com/networking/warrantysummary
†HP warranty includes repair or replacement of hardware for as long as you own the product, with next business day
advance replacement (available in most countries). The disk drive included with HP AllianceOne Advanced Services and
Services zl Modules, HP Threat Management Services zl Module, HP AllianceOne Extended zl Module with Riverbed
Steelhead, HP MSM765zl Mobility Controller and HP Survivable Branch Communication zl Module powered by Microsoft
Lync has a five-year hardware warranty. For details, refer to the Software license and hardware warranty statements at
www.hp.com/networking/warranty.
DA - 13677 Worldwide QuickSpecs — Version 13 — 2.25.2014
Page 4
QuickSpecs
HP 1910 Switch Series
Configuration
Build To Order: BTO is a standalone unit with no integration. BTO products ship standalone are not part of a CTO
or Rack-Shippable solution.
HP 1910-8 Switch
8 RJ-45 autosensing 10/100 ports
2 SFP dual-personality 1000 Mbps ports
min=0 \ max=2 SFP Transceivers
1U - Height
HP 1910-8 -PoE+ Switch
8 RJ-45 auto-negotiating 10/100 ports
2 SFP dual-personality 1000 Mbps ports
min=0 \ max=2 SFP Transceivers
1U - Height
HP 1910-8G Switch
8 RJ-45 auto-negotiating 10/100/1000 ports
1 SFP 1000 Mbps port
min=0 \ max=1 SFP Transceiver
1U - Height
JG536A
See
Configuration
Note: 2,3
JG537A
See
Configuration
Note:2,3
JG348A
See
Configuration
Note: 4,5
PDU Cable NA/MX/TW/JP
C15 PDU Jumper Cord (NA/MX/TW/JP)
JG348A#B2B
PDU Cable ROW
C15 PDU Jumper Cord (ROW)
JG348A#B2C
HP 1910-8G-PoE+ (65W) Switch
8 RJ-45 auto-negotiating 10/100/1000 ports
1 SFP 1000 Mbps port
min=0 \ max=1 SFP Transceiver
1U - Height
JG349A
See
Configuration
Note: 4,5
PDU Cable NA/MX/TW/JP
C15 PDU Jumper Cord (NA/MX/TW/JP)
JG349A#B2B
PDU Cable ROW
C15 PDU Jumper Cord (ROW)
JG349A#B2C
HP 1910-8G-PoE+ (180W) Switch
8 RJ-45 auto-negotiating 10/100/1000 ports
1 SFP 1000 Mbps port
min=0 \ max=1 SFP Transceiver
1U - Height
JG350A
See
Configuration
Note:4,5
PDU Cable NA/MX/TW/JP
C15 PDU Jumper Cord (NA/MX/TW/JP)
JG350A#B2B
PDU Cable ROW
C15 PDU Jumper Cord (ROW)
JG350A#B2C
HP 1910-16G Switch
JE005A
DA - 13677 Worldwide QuickSpecs — Version 13 — 2.25.2014
Page 5
QuickSpecs
HP 1910 Switch Series
Configuration
16 RJ-45 auto-negotiating 10/100/1000 ports
4 SFP 1000 Mbps port
min=0 \ max=4 SFP Transceivers
1U - Height
See
Configuration
Note:1, 5
PDU Cable NA/MX/TW/JP
C15 PDU Jumper Cord (NA/MX/TW/JP)
JE005A#B2B
PDU Cable ROW
C15 PDU Jumper Cord (ROW)
JE005A#B2C
HP 1910-24G-PoE (170W) Switch
24 RJ-45 auto-negotiating 10/100/1000 ports
4 SFP 1000 Mbps ports
min=0 \ max=4 SFP Transceivers
1U - Height
JE008A
See
Configuration
Note:1, 5
PDU Cable NA/MX/TW/JP
C15 PDU Jumper Cord (NA/MX/TW/JP)
JE008A#B2B
PDU Cable ROW
C15 PDU Jumper Cord (ROW)
JE008A#B2C
HP 1910-24G-PoE (365W) Switch
24 RJ-45 auto-negotiating 10/100/1000 ports
4 SFP 1000 Mbps ports
min=0 \ max=4 SFP Transceivers
1U - Height
JE007A
See
Configuration
Note:1, 5
PDU Cable NA/MX/TW/JP
C15 PDU Jumper Cord (NA/MX/TW/JP)
JE007A#B2B
PDU Cable ROW
C15 PDU Jumper Cord (ROW)
JE007A#B2C
HP 1910-24G Switch
24 RJ-45 auto-negotiating 10/100/1000 ports
4 SFP 1000 Mbps ports
min=0 \ max=4 SFP Transceivers
1U - Height
JE006A
See
Configuration
Note:1, 5
PDU Cable NA/MX/TW/JP
C15 PDU Jumper Cord (NA/MX/TW/JP)
JE006A#B2B
PDU Cable ROW
C15 PDU Jumper Cord (ROW)
JE006A#B2C
HP 1910-24 Switch
24 RJ-45 autosensing 10/100 ports
2 SFP dual-personality 1000 Mbps ports
min=0 \ max=2 SFP Transceivers
1U - Height
JG538A
See
Configuration
Note:2,3
DA - 13677 Worldwide QuickSpecs — Version 13 — 2.25.2014
Page 6
QuickSpecs
HP 1910 Switch Series
Configuration
HP 1910-24-PoE+ Switch
24 RJ-45 auto-negotiating 10/100 ports
2 SFP dual-personality 1000 Mbps ports
min=0 \ max=2 SFP Transceivers
1U - Height
JG539A
See
Configuration
Note: 2,3
HP 1910-48G Switch
48 RJ-45 auto-negotiating 10/100/1000 ports
4 SFP 1000 Mbps ports
min=0 \ max=4 SFP Transceivers
1U - Height
JE009A
See
Configuration
Note:1, 5
PDU Cable NA/MX/TW/JP
C15 PDU Jumper Cord (NA/MX/TW/JP)
JE009A#B2B
PDU Cable ROW
C15 PDU Jumper Cord (ROW)
JE009A#B2C
HP 1910-48 Switch
48 RJ-45 autosensing 10/100 ports
2 RJ-45 autosensing10/100/1000 ports
2 SFP 1000 Mbps ports
min=0 \ max=2 SFP Transceivers
1U - Height
JG540A
See
Configuration
Note: 2,3
Configuration Rules:
Note 1
The following Transceivers install into this switch:
HP X121 1G SFP LC SX Transceiver
HP X121 1G SFP LC LX Transceiver
HP X121 1G SFP RJ45 T Transceiver
HP X120 1G SFP LC SX Transceiver
HP X120 1G SFP LC LX Transceiver
HP X125 1G SFP RJ45 T Transceiver
HP X125 1G SFP LC LH40 1310nm Transceiver
HP X120 1G SFP LC LH40 1550nm Transceiver
HP X125 1G SFP LC LH70 Transceiver
HP X120 1G SFP LC BX 10-U Transceiver
HP X120 1G SFP LC BX 10-D Transceiver
J4858C
J4859C
J8177C
JD118B
JD119B
JD089A
JD061A
JD062A
JD063B
JD098B
JD099B
Note 2
Localization required. (See Localization Menu for list.)
Note 3
The following Transceivers install into this switch:
HP X121 1G SFP LC SX Transceiver
HP X121 1G SFP LC LX Transceiver
HP X120 1G SFP LC LX Transceiver
J4858C
J4859C
JD119B
The following Transceivers install into this switch:
HP X121 1G SFP LC SX Transceiver
HP X121 1G SFP LC LX Transceiver
HP X121 1G SFP RJ45 T Transceiver
HP X120 1G SFP LC SX Transceiver
J4858C
J4859C
J8177C
JD118B
Note 4
DA - 13677 Worldwide QuickSpecs — Version 13 — 2.25.2014
Page 7
QuickSpecs
HP 1910 Switch Series
Configuration
HP X120 1G SFP LC LX Transceiver
HP X120 1G SFP RJ45 T Transceiver
HP X125 1G SFP LC LH40 1310nm Transceiver
HP X120 1G SFP LC LH40 1550nm Transceiver
HP X125 1G SFP LC LH70 Transceiver
Note 5
JD119B
JD089B
JD061A
JD062A
JD063B
Localization (Wall Power Cord) required on orders without #B2B or #B2C (PDU Power Cord).
(See Localization Menu)
Internal or External Power Supplies(Model Dependant)
Internal Power supplies Included
External Redundant Power Supplies
HP RPS1600 Redundant Power System
Height = 1U
includes 1 x c13, 1600w and Power Supply port
JG136A
See
Configuration
Note:2,3,4
HP RPS1600 1600W AC Power Supply
Installs into JG136A only
JG137A
See
Configuration
Note:1,3
Configuration Rules:
Note 1
If this power supply is selected, The JG136A - HP A-RPS1600 Redundant
Power System must be on order or onsite.
Note 2
Localization required.
Note 3
Each switch will only support 1 JG136A and 1 JG137A Power supply systems.
Note 4
This power supply only supported on switch JE007A.
Options for the HP 1600 External RPS Power Supply
HP X290 1000 A JD5 2m RPS Cable
Remark:
JD187A
See
Configuration
Note:1
These cables are used to connect the External Power System to Switch.
Configuration Rules:
Note 1
This Cable is only supported on switch JE007A when used with the RPS 1600
(JG136A)
Transceivers
DA - 13677 Worldwide QuickSpecs — Version 13 — 2.25.2014
Page 8
QuickSpecs
HP 1910 Switch Series
Configuration
SFP Transceivers
HP X121 1G SFP LC SX Transceiver
HP X121 1G SFP LC LX Transceiver
HP X121 1G SFP RJ45 T Transceiver
HP X120 1G SFP LC SX Transceiver
HP X120 1G SFP LC LX Transceiver
HP X120 1G SFP RJ45 T Transceiver
HP X120 1G SFP LC BX 10-U Transceiver
HP X120 1G SFP LC BX 10-D Transceiver
HP X125 1G SFP LC LH40 1310nm Transceiver
HP X120 1G SFP LC LH40 1550nm Transceiver
HP X125 1G SFP LC LH70 Transceiver
J4858C
J4859C
J8177C
JD118B
JD119B
JD089B
JD098B
JD099B
JD061A
JD062A
JD063B
Cables
Multi-Mode Cables
HP LC to LC Multi-mode OM3 2-Fiber 0.5m 1-Pack Fiber Optic Cable
HP LC to LC Multi-mode OM3 2-Fiber 1.0m 1-Pack Fiber Optic Cable
HP LC to LC Multi-mode OM3 2-Fiber 2.0m 1-Pack Fiber Optic Cable
HP LC to LC Multi-mode OM3 2-Fiber 5.0m 1-Pack Fiber Optic Cable
HP LC to LC Multi-mode OM3 2-Fiber 15.0m 1-Pack Fiber Optic Cable
HP LC to LC Multi-mode OM3 2-Fiber 30.0m 1-Pack Fiber Optic Cable
HP LC to LC Multi-mode OM3 2-Fiber 50.0m 1-Pack Fiber Optic Cable
HP Premier Flex LC/LC Multi-mode OM4 2 fiber 1m Cable
HP Premier Flex LC/LC Multi-mode OM4 2 fiber 2m Cable
HP Premier Flex LC/LC Multi-mode OM4 2 fiber 5m Cable
HP Premier Flex LC/LC Multi-mode OM4 2 fiber 15m Cable
HP Premier Flex LC/LC Multi-mode OM4 2 fiber 30m Cable
HP Premier Flex LC/LC Multi-mode OM4 2 fiber 50m Cable
DA - 13677 Worldwide QuickSpecs — Version 13 — 2.25.2014
AJ833A
AJ834A
AJ835A
AJ836A
AJ837A
AJ838A
AJ839A
QK732A
QK733A
QK734A
QK735A
QK736A
QK737A
Page 9
QuickSpecs
HP 1910 Switch Series
Technical Specifications
HP 1910-48G Switch (JE009A)
Ports
48 RJ-45 auto-negotiating 10/100/1000 ports (IEEE 802.3 Type 10BASE-T, IEEE 802.3u Type
100BASE-TX, IEEE 802.3ab Type 1000BASE-T)
4 SFP 1000 Mbps ports
1 RJ-45 console port to access limited CLI port
Supports a maximum of 48 autosensing 10/100/1000 ports plus 4 1000BASE-X SFP ports, or a
combination
Physical
Dimensions
17.4(w) x 10.24(d) x 1.7(h) in (44.2 x 26.01 x 4.32 cm) (1U height)
characteristics
Weight
6.8 lb (3.08 kg)
Memory and processor Module
ARM @ 333 MHz, 128 MB flash, 128 MB RAM; packet buffer size: 512
KB
Mounting
Mounts in an EIA-standard 19 in. telco rack or equipment cabinet (hardware included)
Performance
100 Mb Latency
< 5 µs
1000 Mb Latency
< 5 µs
Throughput
up to 77.4 Mpps (64-byte packets)
Routing/Switching
104 Gbps
capacity
Environment
Electrical
characteristics
Achieved Miercom
Certified Green Award
Safety
Emissions
Management
Notes
Services
Routing table size
32 entries (IPv4), 32 entries (IPv6)
MAC address table size 8192 entries
Operating temperature 32°F to 113°F (0°C to 45°C)
Operating relative
10% to 90%, non-condensing
humidity
Nonoperating/Storage -40°F to 158°F (-40°C to 70°C)
temperature
Nonoperating/Storage 10% to 95%, non-condensing
relative humidity
Frequency
50/60 Hz
Voltage
100-240 VAC
Maximum power rating59.8 W
Notes
Maximum power rating and maximum heat dissipation are the worstcase theoretical maximum numbers provided for planning the
infrastructure with fully loaded PoE (if equipped), 100% traffic, all ports
plugged in, and all modules populated.
UL 60950; IEC 60950-1; EN 60950-1; CAN/CSA-C22.2 No. 60950-1-03
FCC part 15 Class A; VCCI Class A; EN 55022 Class A; CISPR 22 Class A; EN 55024; EN
61000-3-2 2000,
61000-3-3; ICES-003 Class A
IMC - Intelligent Management Center; limited command-line interface; Web browser; SNMP
Manager;
IEEE 802.3 Ethernet MIB
SFP ports and copper ports work simultaneously, independent of each other to give a total of 52
Gigabit-capable ports.
3-year, 4-hour onsite, 13x5 coverage for hardware (UV786E)
3-year, 4-hour onsite, 24x7 coverage for hardware (UW485E)
3-year, 4-hour onsite, 24x7 coverage for hardware, 24x7 SW phone support and SW updates
(UW036E)
3-year, 4-hour onsite, 24x7 coverage for hardware, 24x7 SW phone support and SW updates
(UW488E)
3-year, 24x7 SW phone support, software updates (UV807E)
3-year, 24x7 SW phone support, software updates (UV789E)
1-year, post-warranty, 4-hour onsite, 13x5 coverage for hardware (HR682E)
DA - 13677 Worldwide QuickSpecs — Version 13 — 2.25.2014
Page 10
QuickSpecs
HP 1910 Switch Series
Technical Specifications
1-year, post-warranty, 4-hour onsite, 24x7 coverage for hardware (HR683E)
1-year, post-warranty, 4-hour onsite, 24x7 coverage for hardware, 24x7 software phone support
(HR684E)
Installation with minimum configuration, system-based pricing (UY901E)
Installation with HP-provided configuration, system-based pricing (UY902E)
4-year, 4-hour onsite, 13x5 coverage for hardware (UV787E)
4-year, 4-hour onsite, 13x5 coverage for hardware (UV805E)
4-year, 4-hour onsite, 24x7 coverage for hardware (UW034E)
4-year, 4-hour onsite, 24x7 coverage for hardware (UW486E)
4-year, 4-hour onsite, 24x7 coverage for hardware, 24x7 software phone (UW037E)
4-year, 4-hour onsite, 24x7 coverage for hardware, 24x7 software phone (UW489E)
4-year, 24x7 SW phone support, software updates (UV790E)
4-year, 24x7 SW phone support, software updates (UV808E)
5-year, 4-hour onsite, 13x5 coverage for hardware (UV788E)
5-year, 4-hour onsite, 13x5 coverage for hardware (UV806E)
5-year, 4-hour onsite, 24x7 coverage for hardware (UW035E)
5-year, 4-hour onsite, 24x7 coverage for hardware (UW487E)
5-year, 4-hour onsite, 24x7 coverage for hardware, 24x7 software phone (UW038E)
5-year, 4-hour onsite, 24x7 coverage for hardware, 24x7 software phone (UW490E)
5-year, 24x7 SW phone support, software updates (UV791E)
5-year, 24x7 SW phone support, software updates (UV809E)
3 Yr 6 hr Call-to-Repair Onsite (UW491E)
3 Yr 6 hr Call-to-Repair Onsite (UW039E)
4 Yr 6 hr Call-to-Repair Onsite (UW492E)
4 Yr 6 hr Call-to-Repair Onsite (UW040E)
5 Yr 6 hr Call-to-Repair Onsite (UW493E)
5 Yr 6 hr Call-to-Repair Onsite (UW041E)
1-year, 6 hour Call-To-Repair Onsite for hardware (HR686E)
Refer to the HP website at: www.hp.com/networking/services for details on the service-level
descriptions and product numbers. For details about services and response times in your area,
please contact your local HP sales office.
HP 1910-24G-PoE (365 W) Switch (JE007A)
Ports
24 RJ-45 auto-negotiating 10/100/1000 PoE ports (IEEE 802.3 Type 10BASE-T, IEEE 802.3u
Type 100BASE-TX, IEEE 802.3ab Type 1000BASE-T, IEEE 802.3af PoE)
4 SFP 1000 Mbps ports
1 RJ-45 console port to access limited CLI port
Supports a maximum of 24 autosensing 10/100/1000 ports plus 4 1000BASE-X SFP ports, or a
combination
Physical
Dimensions
17.4(w) x 16.54(d) x 1.7(h) in (44.2 x 42.01 x 4.32 cm) (1U height)
characteristics
Weight
6.8 lb (3.08 kg)
Memory and processor Module
ARM @ 333 MHz, 128 MB flash, 128 MB RAM; packet buffer size: 512
KB
Mounting
Mounts in an EIA-standard 19 in. telco rack or equipment cabinet (hardware included)
Performance
100 Mb Latency
< 5 µs
1000 Mb Latency
< 5 µs
Throughput
up to 41.7 Mpps (64-byte packets)
Routing/Switching
56 Gbps
capacity
Routing table size
32 entries (IPv4), 32 entries (IPv6)
MAC address table size 8192 entries
Environment
Operating temperature 32°F to 113°F (0°C to 45°C)
DA - 13677 Worldwide QuickSpecs — Version 13 — 2.25.2014
Page 11
QuickSpecs
HP 1910 Switch Series
Technical Specifications
Electrical
characteristics
Safety
Emissions
Management
Notes
Services
Operating relative
10% to 90%, non-condensing
humidity
Non-operating/Storage -40°F to 158°F (-40°C to 70°C)
temperature
Non-operating/Storage 10% to 95%, non-condensing
relative humidity
Frequency
50 / 60 Hz
Voltage
100-240 VAC
Maximum power rating523 W
PoE power
365 W
Notes
Maximum power rating and maximum heat dissipation are the worstcase theoretical maximum numbers provided for planning the
infrastructure with fully loaded PoE (if equipped), 100% traffic, all ports
plugged in, and all modules populated.
PoE power is the power supplied by the internal power supply. It is
dependent on the type and quantity of power supplies and may be
supplemented with the use of an external power supply (EPS).
UL 60950; IEC 60950-1; EN 60950-1; CAN/CSA-C22.2 No. 60950-1-03
FCC part 15 Class A; VCCI Class A; EN 55022 Class A; CISPR 22 Class A; EN 55024; EN
61000-3-2 2000,
61000-3-3; ICES-003 Class A
IMC - Intelligent Management Center; limited command-line interface; Web browser; SNMP
Manager;
IEEE 802.3 Ethernet MIB
SFP ports and copper ports can work simultaneously, independent of each other to give a total of
28
Gigabit-capable ports.
3-year, 4-hour onsite, 24x7 coverage for hardware (UW485E)
3-year, 4-hour onsite, 24x7 coverage for hardware, 24x7 SW phone support and SW updates
(UW036E)
3-year, 4-hour onsite, 24x7 coverage for hardware, 24x7 SW phone support and SW updates
(UW488E)
3-year, 24x7 SW phone support, software updates (UV807E)
3-year, 24x7 SW phone support, software updates (UV789E)
1-year, post-warranty, 4-hour onsite, 13x5 coverage for hardware (HR682E)
1-year, post-warranty, 4-hour onsite, 24x7 coverage for hardware (HR683E)
1-year, post-warranty, 4-hour onsite, 24x7 coverage for hardware, 24x7 software phone support
(HR684E)
Installation with minimum configuration, system-based pricing (UY901E)
Installation with minimum configuration, system-based pricing (UW451E)
Installation with HP-provided configuration, system-based pricing (UY902E)
4-year, 4-hour onsite, 13x5 coverage for hardware (UV787E)
4-year, 4-hour onsite, 13x5 coverage for hardware (UV805E)
4-year, 4-hour onsite, 24x7 coverage for hardware (UW034E)
4-year, 4-hour onsite, 24x7 coverage for hardware (UW486E)
4-year, 4-hour onsite, 24x7 coverage for hardware, 24x7 software phone (UW037E)
4-year, 4-hour onsite, 24x7 coverage for hardware, 24x7 software phone (UW489E)
4-year, 24x7 SW phone support, software updates (UV790E)
4-year, 24x7 SW phone support, software updates (UV808E)
5-year, 4-hour onsite, 13x5 coverage for hardware (UV788E)
5-year, 4-hour onsite, 13x5 coverage for hardware (UV806E)
5-year, 4-hour onsite, 24x7 coverage for hardware (UW035E)
5-year, 4-hour onsite, 24x7 coverage for hardware (UW487E)
5-year, 4-hour onsite, 24x7 coverage for hardware, 24x7 software phone (UW038E)
5-year, 4-hour onsite, 24x7 coverage for hardware, 24x7 software phone (UW490E)
DA - 13677 Worldwide QuickSpecs — Version 13 — 2.25.2014
Page 12
QuickSpecs
HP 1910 Switch Series
Technical Specifications
5-year, 24x7 SW phone support, software updates (UV791E)
5-year, 24x7 SW phone support, software updates (UV809E)
3 Yr 6 hr Call-to-Repair Onsite (UW491E)
3 Yr 6 hr Call-to-Repair Onsite (UW039E)
4 Yr 6 hr Call-to-Repair Onsite (UW492E)
4 Yr 6 hr Call-to-Repair Onsite (UW040E)
5 Yr 6 hr Call-to-Repair Onsite (UW493E)
5 Yr 6 hr Call-to-Repair Onsite (UW041E)
1-year, 6 hour Call-To-Repair Onsite for hardware (HR686E)
Refer to the HP website at: www.hp.com/networking/services for details on the service-level
descriptions and product numbers. For details about services and response times in your area,
please contact your local HP sales office.
HP 1910-24G-PoE (170 W) Switch (JE008A)
Ports
24 RJ-45 auto-negotiating 10/100/1000 PoE ports (IEEE 802.3 Type 10BASE-T, IEEE 802.3u
Type 100BASE-TX, IEEE 802.3ab Type 1000BASE-T, IEEE 802.3af PoE)
4 SFP 1000 Mbps ports
1 RJ-45 console port to access limited CLI port
Supports a maximum of 24 autosensing 10/100/1000 ports plus 4 1000BASE-X SFP ports, or a
combination
Physical
Dimensions
17.4(w) x 16.54(d) x 1.7(h) in (44.2 x 42.01 x 4.32 cm) (1U height)
characteristics
Weight
6.8 lb (3.08 kg)
Memory and processor Module
ARM @ 333 MHz, 128 MB flash, 128 MB RAM; packet buffer size: 512
KB
Mounting
Mounts in an EIA-standard 19 in. telco rack or equipment cabinet (hardware included)
Performance
100 Mb Latency
< 5 µs
1000 Mb Latency
< 5 µs
Throughput
up to 41.7 Mpps (64-byte packets)
Routing/Switching
56 Gbps
capacity
Routing table size
32 entries (IPv4), 32 entries (IPv6)
MAC address table size 8192 entries
Environment
Operating temperature 32°F to 113°F (0°C to 45°C)
Operating relative
10% to 90%, non-condensing
humidity
Non-operating/Storage -40°F to 158°F (-40°C to 70°C)
temperature
Non-operating/Storage 10% to 95%, non-condensing
relative humidity
Electrical
Frequency
50 / 60 Hz
characteristics
Voltage
100-240 VAC
Maximum power rating255 W
PoE power
170 W
Notes
Maximum power rating and maximum heat dissipation are the worstcase theoretical maximum numbers provided for planning the
infrastructure with fully loaded PoE (if equipped), 100% traffic, all ports
plugged in, and all modules populated.
PoE power is the power supplied by the internal power supply. It is
dependent on the type and quantity of power supplies.
Safety
UL 60950; IEC 60950-1; EN 60950-1; CAN/CSA-C22.2 No. 60950-1-03
DA - 13677 Worldwide QuickSpecs — Version 13 — 2.25.2014
Page 13
QuickSpecs
HP 1910 Switch Series
Technical Specifications
Emissions
Management
Notes
Services
FCC part 15 Class A; VCCI Class A; EN 55022 Class A; CISPR 22 Class A; EN 55024; EN
61000-3-2 2000,
61000-3-3; ICES-003 Class A
IMC - Intelligent Management Center; limited command-line interface; Web browser; SNMP
Manager;
IEEE 802.3 Ethernet MIB
SFP ports and copper ports can work simultaneously, independent of each other to give a total of
28
Gigabit-capable ports.
3-year, 4-hour onsite, 24x7 coverage for hardware (UW485E)
3-year, 4-hour onsite, 24x7 coverage for hardware, 24x7 SW phone support and SW updates
(UW036E)
3-year, 4-hour onsite, 24x7 coverage for hardware, 24x7 SW phone support and SW updates
(UW488E)
3-year, 24x7 SW phone support, software updates (UV807E)
3-year, 24x7 SW phone support, software updates (UV789E)
1-year, post-warranty, 4-hour onsite, 13x5 coverage for hardware (HR682E)
1-year, post-warranty, 4-hour onsite, 24x7 coverage for hardware (HR683E)
1-year, post-warranty, 4-hour onsite, 24x7 coverage for hardware, 24x7 software phone support
(HR684E)
Installation with minimum configuration, system-based pricing (UY901E)
Installation with HP-provided configuration, system-based pricing (UY902E)
4-year, 4-hour onsite, 13x5 coverage for hardware (UV787E)
4-year, 4-hour onsite, 13x5 coverage for hardware (UV805E)
4-year, 4-hour onsite, 24x7 coverage for hardware (UW034E)
4-year, 4-hour onsite, 24x7 coverage for hardware (UW486E)
4-year, 4-hour onsite, 24x7 coverage for hardware, 24x7 software phone (UW037E)
4-year, 4-hour onsite, 24x7 coverage for hardware, 24x7 software phone (UW489E)
4-year, 24x7 SW phone support, software updates (UV790E)
4-year, 24x7 SW phone support, software updates (UV808E)
5-year, 4-hour onsite, 13x5 coverage for hardware (UV788E)
5-year, 4-hour onsite, 13x5 coverage for hardware (UV806E)
5-year, 4-hour onsite, 24x7 coverage for hardware (UW035E)
5-year, 4-hour onsite, 24x7 coverage for hardware (UW487E)
5-year, 4-hour onsite, 24x7 coverage for hardware, 24x7 software phone (UW038E)
5-year, 4-hour onsite, 24x7 coverage for hardware, 24x7 software phone (UW490E)
5-year, 24x7 SW phone support, software updates (UV791E)
5-year, 24x7 SW phone support, software updates (UV809E)
3 Yr 6 hr Call-to-Repair Onsite (UW491E)
3 Yr 6 hr Call-to-Repair Onsite (UW039E)
4 Yr 6 hr Call-to-Repair Onsite (UW492E)
4 Yr 6 hr Call-to-Repair Onsite (UW040E)
5 Yr 6 hr Call-to-Repair Onsite (UW493E)
5 Yr 6 hr Call-to-Repair Onsite (UW041E)
1-year, 6 hour Call-To-Repair Onsite for hardware (HR686E)
Refer to the HP website at www.hp.com/networking/services for details on the service-level
descriptions and product numbers. For details about services and response times in your area,
please contact your local HP sales office.
HP 1910-24G Switch (JE006A)
DA - 13677 Worldwide QuickSpecs — Version 13 — 2.25.2014
Page 14
QuickSpecs
HP 1910 Switch Series
Technical Specifications
Ports
24 RJ-45 auto-negotiating 10/100/1000 ports (IEEE 802.3 Type 10BASE-T, IEEE 802.3u Type
100BASE-TX, IEEE 802.3ab Type 1000BASE-T)
4 SFP 1000 Mbps ports
1 RJ-45 console port to access limited CLI port
Supports a maximum of 24 autosensing 10/100/1000 ports plus 4 1000BASE-X SFP ports, or a
combination
Physical
Dimensions
17.4(w) x 6.3(d) x 1.7(h) in (44.2 x 16 x 4.32 cm) (1U height)
characteristics
Weight
6.8 lb (3.08 kg)
Memory and processor Module
ARM @ 333 MHz, 128 MB flash, 128 MB RAM; packet buffer size: 512
KB
Mounting
Mounts in an EIA-standard 19 in. telco rack or equipment cabinet (hardware included)
Performance
100 Mb Latency
< 5 µs
1000 Mb Latency
< 5 µs
Throughput
up to 41.7 million pps
Routing/Switching
56 Gbps
capacity
Routing table size
32 entries
MAC address table size 8192 entries
Environment
Electrical
characteristics
Safety
Emissions
Management
Notes
Services
Operating temperature 32°F to 113°F (0°C to 45°C)
Operating relative
10% to 90%, non-condensing
humidity
Non-operating/Storage -40°F to 158°F (-40°C to 70°C)
temperature
Non-operating/Storage 10% to 95%, non-condensing
relative humidity
Frequency
50/60 Hz
Voltage
100-240 VAC
Maximum power rating31.5 W
Notes
Maximum power rating and maximum heat dissipation are the worstcase theoretical maximum numbers provided for planning the
infrastructure with fully loaded PoE (if equipped), 100% traffic, all ports
plugged in, and all modules populated.
UL 60950; IEC 60950-1; EN 60950-1; CAN/CSA-C22.2 No. 60950-1-03
FCC part 15 Class A; VCCI Class A; EN 55022 Class A; CISPR 22 Class A; EN 55024; EN
61000-3-2 2000, 61000-3-3; ICES-003 Class A
IMC - Intelligent Management Center; limited command-line interface; Web browser; SNMP
Manager; IEEE 802.3 Ethernet MIB
SFP ports and copper ports can work simultaneously, independent of each other to give a total of
28
Gigabit-capable ports.
3-year, 4-hour onsite, 13x5 coverage for hardware (UV786E)
3-year, 4-hour onsite, 24x7 coverage for hardware (UW485E)
3-year, 4-hour onsite, 24x7 coverage for hardware, 24x7 SW phone support and SW updates
(UW036E)
3-year, 4-hour onsite, 24x7 coverage for hardware, 24x7 SW phone support and SW updates
(UW488E)
3-year, 24x7 SW phone support, software updates (UV807E)
3-year, 24x7 SW phone support, software updates (UV789E)
1-year, post-warranty, 4-hour onsite, 13x5 coverage for hardware (HR682E)
1-year, post-warranty, 4-hour onsite, 24x7 coverage for hardware (HR683E)
1-year, post-warranty, 4-hour onsite, 24x7 coverage for hardware, 24x7 software phone support
(HR684E)
DA - 13677 Worldwide QuickSpecs — Version 13 — 2.25.2014
Page 15
QuickSpecs
HP 1910 Switch Series
Technical Specifications
Installation with minimum configuration, system-based pricing (UY901E)
Installation with HP-provided configuration, system-based pricing (UY902E)
4-year, 4-hour onsite, 13x5 coverage for hardware (UV787E)
4-year, 4-hour onsite, 13x5 coverage for hardware (UV805E)
4-year, 4-hour onsite, 24x7 coverage for hardware (UW034E)
4-year, 4-hour onsite, 24x7 coverage for hardware (UW486E)
4-year, 4-hour onsite, 24x7 coverage for hardware, 24x7 software phone (UW037E)
4-year, 4-hour onsite, 24x7 coverage for hardware, 24x7 software phone (UW489E)
4-year, 24x7 SW phone support, software updates (UV790E)
4-year, 24x7 SW phone support, software updates (UV808E)
5-year, 4-hour onsite, 13x5 coverage for hardware (UV788E)
5-year, 4-hour onsite, 13x5 coverage for hardware (UV806E)
5-year, 4-hour onsite, 24x7 coverage for hardware (UW035E)
5-year, 4-hour onsite, 24x7 coverage for hardware (UW487E)
5-year, 4-hour onsite, 24x7 coverage for hardware, 24x7 software phone (UW038E)
5-year, 4-hour onsite, 24x7 coverage for hardware, 24x7 software phone (UW490E)
5-year, 24x7 SW phone support, software updates (UV791E)
5-year, 24x7 SW phone support, software updates (UV809E)
3 Yr 6 hr Call-to-Repair Onsite (UW491E)
3 Yr 6 hr Call-to-Repair Onsite (UW039E)
4 Yr 6 hr Call-to-Repair Onsite (UW492E)
4 Yr 6 hr Call-to-Repair Onsite (UW040E)
5 Yr 6 hr Call-to-Repair Onsite (UW493E)
5 Yr 6 hr Call-to-Repair Onsite (UW041E)
1-year, 6 hour Call-To-Repair Onsite for hardware (HR686E)
Refer to the HP website at: www.hp.com/networking/services for details on the service-level
descriptions and product numbers. For details about services and response times in your area,
please contact your local HP sales office.
HP 1910-16G Switch (JE005A)
Ports
16 RJ-45 auto-negotiating 10/100/1000 ports (IEEE 802.3 Type 10BASE-T, IEEE 802.3u Type
100BASE-TX, IEEE 802.3ab Type 1000BASE-T)
4 SFP 1000 Mbps ports
1 RJ-45 console port to access limited CLI port
Supports a maximum of 16 autosensing 10/100/1000 ports plus 4 1000BASE-X SFP ports, or a
combination
Physical
Dimensions
17.4(w) x 6.3(d) x 1.7(h) in (44.2 x 16 x 4.32 cm) (1U height)
characteristics
Weight
6.8 lb (3.08 kg)
Memory and processor Module
ARM @ 333 MHz, 128 MB flash, 128 MB RAM; packet buffer size: 512
KB
Mounting
Mounts in an EIA-standard 19 in. telco rack or equipment cabinet (hardware included)
Performance
100 Mb Latency
< 5 µs
1000 Mb Latency
< 5 µs
Throughput
up to 29.8 million pps
Routing/Switching
40 Gbps
capacity
Routing table size
32 entries
MAC address table size 8192 entries
Environment
Operating temperature 32°F to 113°F (0°C to 45°C)
Operating relative
10% to 90%, non-condensing
humidity
DA - 13677 Worldwide QuickSpecs — Version 13 — 2.25.2014
Page 16
QuickSpecs
HP 1910 Switch Series
Technical Specifications
Electrical
characteristics
Safety
Emissions
Management
Notes
Services
Non-operating/Storage -40°F to 158°F (-40°C to 70°C)
temperature
Non-operating/Storage 10% to 95%, non-condensing
relative humidity
Frequency
50 / 60 Hz
Voltage
100-240 VAC
Maximum power rating25.1 W
Notes
Maximum power rating and maximum heat dissipation are the worstcase theoretical maximum numbers provided for planning the
infrastructure with fully loaded PoE (if equipped), 100% traffic, all ports
plugged in, and all modules populated.
UL 60950; IEC 60950-1; EN 60950-1; CAN/CSA-C22.2 No. 60950-1-03
FCC part 15 Class A; VCCI Class A; EN 55022 Class A; CISPR 22 Class A; EN 55024; EN
61000-3-2 2000, 61000-3-3; ICES-003 Class A
IMC - Intelligent Management Center; limited command-line interface; Web browser; SNMP
Manager; IEEE 802.3 Ethernet MIB
SFP ports and copper ports can work simultaneously, independent of each other to give a total of
20 Gigabit-capable ports.
3-year, 4-hour onsite, 13x5 coverage for hardware (UV786E)
3-year, 4-hour onsite, 24x7 coverage for hardware (UW485E)
3-year, 4-hour onsite, 24x7 coverage for hardware, 24x7 SW phone support and SW updates
(UW036E)
3-year, 4-hour onsite, 24x7 coverage for hardware, 24x7 SW phone support and SW updates
(UW488E)
3-year, 24x7 SW phone support, software updates (UV807E)
3-year, 24x7 SW phone support, software updates (UV789E)
1-year, post-warranty, 4-hour onsite, 13x5 coverage for hardware (HR682E)
1-year, post-warranty, 4-hour onsite, 24x7 coverage for hardware (HR683E)
1-year, post-warranty, 4-hour onsite, 24x7 coverage for hardware, 24x7 software phone support
(HR684E)
Installation with minimum configuration, system-based pricing (UY901E)
Installation with HP-provided configuration, system-based pricing (UY902E)
4-year, 4-hour onsite, 13x5 coverage for hardware (UV787E)
4-year, 4-hour onsite, 13x5 coverage for hardware (UV805E)
4-year, 4-hour onsite, 24x7 coverage for hardware (UW034E)
4-year, 4-hour onsite, 24x7 coverage for hardware (UW486E)
4-year, 4-hour onsite, 24x7 coverage for hardware, 24x7 software phone (UW037E)
4-year, 4-hour onsite, 24x7 coverage for hardware, 24x7 software phone (UW489E)
4-year, 24x7 SW phone support, software updates (UV790E)
4-year, 24x7 SW phone support, software updates (UV808E)
5-year, 4-hour onsite, 13x5 coverage for hardware (UV788E)
5-year, 4-hour onsite, 13x5 coverage for hardware (UV806E)
5-year, 4-hour onsite, 24x7 coverage for hardware (UW035E)
5-year, 4-hour onsite, 24x7 coverage for hardware (UW487E)
5-year, 4-hour onsite, 24x7 coverage for hardware, 24x7 software phone (UW038E)
5-year, 4-hour onsite, 24x7 coverage for hardware, 24x7 software phone (UW490E)
5-year, 24x7 SW phone support, software updates (UV791E)
5-year, 24x7 SW phone support, software updates (UV809E)
3 Yr 6 hr Call-to-Repair Onsite (UW491E)
3 Yr 6 hr Call-to-Repair Onsite (UW039E)
4 Yr 6 hr Call-to-Repair Onsite (UW492E)
4 Yr 6 hr Call-to-Repair Onsite (UW040E)
5 Yr 6 hr Call-to-Repair Onsite (UW493E)
5 Yr 6 hr Call-to-Repair Onsite (UW041E)
1-year, 6 hour Call-To-Repair Onsite for hardware (HR686E)
DA - 13677 Worldwide QuickSpecs — Version 13 — 2.25.2014
Page 17
QuickSpecs
HP 1910 Switch Series
Technical Specifications
Refer to the HP website at: www.hp.com/networking/services for details on the service-level
descriptions and product numbers. For details about services and response times in your area,
please contact your local HP sales office.
HP 1910-8G Switch (JG348A)
Ports
8 RJ-45 auto-negotiating 10/100/1000 ports (IEEE 802.3 Type 10BASE-T, IEEE 802.3u Type
100BASE-TX, IEEE 802.3ab Type 1000BASE-T)
1 SFP 1000 Mbps port
1 RJ-45 console port to access limited CLI port
Supports a maximum of 8 autosensing 10/100/1000 ports plus 1 1000BASE-X SFP ports, or a
combination
Physical
Dimensions
8.27(w) x 8.27(d) x 1.72(h) in (21 x 21 x 4.36 cm) (1U height)
characteristics
Weight
4.41 lb (2 kg), Fully loaded
Memory and processor Module
ARM @ 333 MHz, 128 MB flash, 128 MB RAM; packet buffer size: 512
KB
Mounting
Mounts in an EIA-standard 19 in. telco rack or equipment cabinet (hardware included)
Performance
100 Mb Latency
< 5 µs
Environment
Electrical
characteristics
Safety
Emissions
Management
Notes
Services
1000 Mb Latency
< 5 µs
Throughput
up to 13.4 million pps
Routing/Switching
18 Gbps
capacity
Routing table size
32 entries
MAC address table size 8192 entries
Operating temperature 32°F to 113°F (0°C to 45°C)
Operating relative
10% to 90%, non-condensing
humidity
Non-operating/Storage -40°F to 158°F (-40°C to 70°C)
temperature
Non-operating/Storage 10% to 95%, non-condensing
relative humidity
Voltage
100-240 VAC
Maximum power rating14.4 W
Frequency
50/60 Hz
Maximum power rating and maximum heat dissipation are the worst-case theoretical maximum
numbers provided for planning the infrastructure with fully loaded PoE (if equipped), 100% traffic,
all ports plugged in, and all modules populated.
UL 60950; IEC 60950-1; EN 60950-1; CAN/CSA-C22.2 No. 60950-1-03
FCC part 15 Class A; VCCI Class A; EN 55022 Class A; CISPR 22 Class A; EN 55024; EN
61000-3-2 2000, 61000-3-3; ICES-003 Class A
IMC - Intelligent Management Center; limited command-line interface; Web browser; SNMP
Manager; IEEE 802.3 Ethernet MIB
SFP port and copper ports work simultaneously, independent of each other to give a total of 9
Gigabit-capable ports.
Refer to the HP website at: www.hp.com/networking/services for details on the service-level
descriptions and product numbers. For details about services and response times in your area,
please contact your local HP sales office.
DA - 13677 Worldwide QuickSpecs — Version 13 — 2.25.2014
Page 18
QuickSpecs
HP 1910 Switch Series
Technical Specifications
HP 1910-8G-PoE+ (65W) Switch (JG349A)
Ports
8 RJ-45 auto-negotiating 10/100/1000 PoE+ ports (IEEE 802.3 Type 10BASE-T, IEEE 802.3u
Type 100BASE-TX, IEEE 802.3ab Type 1000BASE-T, IEEE 802.3af PoE, IEEE 802.3at)
1 SFP 1000 Mbps port
1 RJ-45 console port to access limited CLI port
Supports a maximum of 8 autosensing 10/100/1000 ports plus 1 1000BASE-X SFP ports, or a
combination
Physical
Dimensions
10.24(w) x 11.81(d) x 1.72(h) in (26 x 30 x 4.36 cm) (1U height)
characteristics
Weight
6.61 lb (3 kg), Fully loaded
Memory and processor Module
ARM @ 333 MHz, 128 MB flash, 128 MB RAM; packet buffer size: 512
KB
Mounting
Mounts in an EIA-standard 19 in. telco rack or equipment cabinet (hardware included)
Performance
100 Mb Latency
< 5 µs
1000 Mb Latency
< 5 µs
Throughput
up to 13.4 million pps
Routing/Switching
18 Gbps
capacity
Routing table size
32 entries
Environment
Electrical
characteristics
Safety
Emissions
Management
Notes
Services
MAC address table size 8192 entries
Operating temperature 32°F to 113°F (0°C to 45°C)
Operating relative
10% to 90%, non-condensing
humidity
Non-operating/Storage -40°F to 158°F (-40°C to 70°C)
temperature
Non-operating/Storage 10% to 95%, non-condensing
relative humidity
Voltage
100-240 VAC
Maximum power rating93 W
PoE power
65 W
Frequency
50/60 Hz
Maximum power rating and maximum heat dissipation are the worst-case theoretical maximum
numbers provided for planning the infrastructure with fully loaded PoE (if equipped), 100% traffic,
all ports plugged in, and all modules populated.
PoE power is the power supplied by the internal power supply. It is dependent
on the type and quantity of power supplies.
UL 60950; IEC 60950-1; EN 60950-1; CAN/CSA-C22.2 No. 60950-1-03
FCC part 15 Class A; VCCI Class A; EN 55022 Class A; CISPR 22 Class A; EN 55024; EN
61000-3-2 2000, 61000-3-3; ICES-003 Class A
IMC - Intelligent Management Center; limited command-line interface; Web browser; SNMP
Manager; IEEE 802.3 Ethernet MIB
SFP port and copper ports work simultaneously, independent of each other to give a total of 9
Gigabit-capable ports.
Refer to the HP website at: www.hp.com/networking/services for details on the service-level
descriptions and product numbers. For details about services and response times in your area,
please contact your local HP sales office.
DA - 13677 Worldwide QuickSpecs — Version 13 — 2.25.2014
Page 19
QuickSpecs
HP 1910 Switch Series
Technical Specifications
HP 1910-8G-PoE+ (180W) Switch (JG350A)
Ports
8 RJ-45 auto-negotiating 10/100/1000 PoE+ ports (IEEE 802.3 Type 10BASE-T, IEEE 802.3u
Type 100BASE-TX, IEEE 802.3ab Type 1000BASE-T, IEEE 802.3af PoE, IEEE 802.3at)
1 SFP 1000 Mbps port
1 RJ-45 console port to access limited CLI port
Supports a maximum of 8 autosensing 10/100/1000 ports plus 1 1000BASE-X SFP ports, or a
combination
Physical
Dimensions
10.24(w) x 11.81(d) x 1.72(h) in (26 x 30 x 4.36 cm) (1U height)
characteristics
Weight
6.61 lb (3 kg), Fully loaded
Memory and processor Module
ARM @ 333 MHz, 128 MB flash, 128 MB RAM; packet buffer size: 512
KB
Mounting
Mounts in an EIA-standard 19 in. telco rack or equipment cabinet (hardware included)
Performance
100 Mb Latency
< 5 µs
1000 Mb Latency
< 5 µs
Throughput
up to 13.4 million pps
Routing/Switching
18 Gbps
capacity
Routing table size
32 entries
Environment
Electrical
characteristics
Safety
Emissions
Management
Notes
Services
MAC address table size 8192 entries
Operating temperature 32°F to 113°F (0°C to 45°C)
Operating relative
10% to 90%, non-condensing
humidity
Non-operating/Storage -40°F to 158°F (-40°C to 70°C)
temperature
Non-operating/Storage 10% to 95%, non-condensing
relative humidity
Frequency
50/60 Hz
Voltage
100-240 VAC
Maximum power rating228 W
PoE power
180 W
Maximum power rating and maximum heat dissipation are the worst-case theoretical maximum
numbers provided for planning the infrastructure with fully loaded PoE (if equipped), 100% traffic,
all ports plugged in, and all modules populated.
PoE power is the power supplied by the internal power supply. It is dependent on the type and
quantity of power supplies.
UL 60950; IEC 60950-1; EN 60950-1; CAN/CSA-C22.2 No. 60950-1-03
FCC part 15 Class A; VCCI Class A; EN 55022 Class A; CISPR 22 Class A; EN 55024; EN
61000-3-2 2000, 61000-3-3; ICES-003 Class A
IMC - Intelligent Management Center; limited command-line interface; Web browser; SNMP
Manager; IEEE 802.3 Ethernet MIB
SFP port and copper ports work simultaneously, independent of each other to give a total of 9
Gigabit-capable ports.
Refer to the HP website at: www.hp.com/networking/services for details on the service-level
descriptions and product numbers. For details about services and response times in your area,
please contact your local HP sales office.
DA - 13677 Worldwide QuickSpecs — Version 13 — 2.25.2014
Page 20
QuickSpecs
HP 1910 Switch Series
Technical Specifications
HP 1910-24 Switch (JG538A)
Ports
24 RJ-45 autosensing 10/100 ports (IEEE 802.3 Type 10BASE-T, IEEE 802.3u Type 100BASETX); Duplex: half or full
2 SFP dual-personality 1000 Mbps ports (IEEE 802.3ab Type 1000BASE-T)
1 RJ-45 console port to access limited CLI port
Supports a maximum of 24 autosensing 10/100 ports plus 2 1000BASE-X SFP ports, with optional
module
Physical
Dimensions
17.32(w) x 6.81(d) x 1.73(h) in (44 x 17.3 x 4.4 cm) (1U height)
characteristics
Weight
4.85 lb (2.2 kg)
Memory and processor Module
MIPS @ 500 MHz, 32 MB flash, 128 MB RAM; packet buffer size: 512
KB
Mounting
Mounts in an EIA-standard 19 in. telco rack or equipment cabinet (hardware included)
Performance
100 Mb Latency
< 5 µs
1000 Mb Latency
< 5 µs
Throughput
up to 6.6 Mpps (64-byte packets)
Routing/Switching
8.8 Gb/s
capacity
Routing table size
32 entries (IPv4), 32 entries (IPv6)
Environment
Electrical
characteristics
Safety
Emissions
Management
Notes
Services
MAC address table size 8192 entries
Operating temperature 32°F to 104°F (0°C to 40°C)
Operating relative
10% to 90%, noncondensing
humidity
Non-operating/Storage -40°F to 158°F (-40°C to 70°C)
temperature
Non-operating/Storage 10% to 95%, noncondensing
relative humidity
Frequency
50/60 Hz
Voltage
100-240 VAC
Maximum power rating12 W
Maximum power rating and maximum heat dissipation are the worst-case theoretical maximum
numbers provided for planning the infrastructure with fully loaded PoE (if equipped), 100% traffic,
all ports plugged in, and all modules populated.
IEC 60950-1; EN 60950-1; UL 60950-1 2nd Edition; CSA C22.2 No. 60950-1-07 2nd Edition
FCC part 15 Class A; VCCI Class A; EN 55022 Class A; CISPR 22 Class A; EN 55024; EN
61000-3-2 2000, 61000-3-3; ICES-003 Class A
IMC - Intelligent Management Center; limited command-line interface; Web browser; SNMP
Manager;
IEEE 802.3 Ethernet MIB
The HP 1910-24G Switch (JE006A) was formerly sold as the 3Com Baseline Plus 2928
(3CRBSG2893) and may ship with this product labeling.
SFP ports and copper ports can work simultaneously, independent of each other to give a total of
28
Gigabit-capable ports.
Refer to the HP website at: www.hp.com/networking/services for details on the service-level
descriptions and product numbers. For details about services and response times in your area,
please contact your local HP sales office.
DA - 13677 Worldwide QuickSpecs — Version 13 — 2.25.2014
Page 21
QuickSpecs
HP 1910 Switch Series
Technical Specifications
HP 1910-8 Switch (JG536A)
Ports
8 RJ-45 autosensing 10/100 ports (IEEE 802.3 Type 10BASE-T, IEEE 802.3u Type
100BASE-TX); Duplex: half or full
2 SFP dual-personality 1000 Mbps ports (IEEE 802.3ab Type 1000BASE-T)
1 RJ-45 console port to access limited CLI port
Supports a maximum of 8 autosensing 10/100 ports plus 2 1000BASE-X SFP ports, or a
combination
Physical
Dimensions
10.47(w) x 6.38(d) x 1.73(h) in (26.6 x 16.2 x 4.4 cm) (1U height)
characteristics
Weight
2.2 lb (1 kg)
Memory and processor Module
MIPS @ 500 MHz, 32 MB flash, 128 MB RAM; packet buffer size: 512
KB
Mounting
Mounts in an EIA-standard 19 in. telco rack or equipment cabinet (hardware included)
Performance
100 Mb Latency
< 5 µs
1000 Mb Latency
< 5 µs
Throughput
up to 4.2 Mpps (64-byte packets)
Routing/Switching
5.6 Gb/s
capacity
Routing table size
32 entries (IPv4), 32 entries (IPv6)
Environment
Electrical
characteristics
Safety
Emissions
Management
Notes
Services
MAC address table size 8192 entries
Operating temperature 32°F to 104°F (0°C to 40°C)
Operating relative
10% to 90%, noncondensing
humidity
Non-operating/Storage -40°F to 158°F (-40°C to 70°C)
temperature
Non-operating/Storage 10% to 95%, noncondensing
relative humidity
Frequency
50/60 Hz
Voltage
100-240 VAC
Maximum power rating8 W
Maximum power rating and maximum heat dissipation are the worst-case theoretical maximum
numbers provided for planning the infrastructure with fully loaded PoE (if equipped), 100% traffic,
all ports plugged in, and all modules populated.
IEC 60950-1; EN 60950-1; UL 60950-1 2nd Edition; CSA C22.2 No. 60950-1-07 2nd Edition
FCC part 15 Class A; VCCI Class A; EN 55022 Class A; CISPR 22 Class A; EN 55024; EN
61000-3-2 2000, 61000-3-3; ICES-003 Class A
IMC - Intelligent Management Center; limited command-line interface; Web browser; SNMP
Manager;
IEEE 802.3 Ethernet MIB
The HP 1910-24G Switch (JE006A) was formerly sold as the 3Com Baseline Plus 2928
(3CRBSG2893) and may ship with this product labeling.
SFP ports and copper ports can work simultaneously, independent of each other to give a total of
28 Gigabit-capable ports.
Refer to the HP website at: www.hp.com/networking/services for details on the service-level
descriptions and product numbers. For details about services and response times in your area,
please contact your local HP sales office.
DA - 13677 Worldwide QuickSpecs — Version 13 — 2.25.2014
Page 22
QuickSpecs
HP 1910 Switch Series
Technical Specifications
HP 1910-48 Switch (JG540A)
Ports
48 RJ-45 autosensing 10/100 ports (IEEE 802.3 Type 10BASE-T, IEEE 802.3u Type 100BASETX); Duplex: half or full
2 SFP 1000 Mbps ports
2 RJ-45 autosensing 10/100/1000 ports (IEEE 802.3 Type 10BASE-T, IEEE 802.3u Type
100BASE-TX, IEEE 802.3ab Type 1000BASE-T); Duplex: 10BASE-T/100BASE-TX: half or full;
1000BASE-T: full only
1 RJ-45 console port to access limited CLI port
Supports a maximum of 48 autosensing 10/100 ports plus 2 1000BASE-X SFP ports plus 2
autosensing 10/100/1000 ports, or a combination
Physical
Dimensions
17.32(w) x 6.81(d) x 1.73(h) in (44 x 17.3 x 4.4 cm) (1U height)
characteristics
Weight
5.07 lb (2.3 kg)
Memory and processor Module
MIPS @ 500 MHz, 32 MB flash, 128 MB RAM; packet buffer size: 1.5
MB
Mounting
Mounts in an EIA-standard 19 in. telco rack or equipment cabinet (hardware included)
Performance
100 Mb Latency
< 5 µs
1000 Mb Latency
< 5 µs
Throughput
up to 13.1 Mpps (64-byte packets)
Environment
Electrical
characteristics
Safety
Emissions
Management
Notes
Services
Routing/Switching
17.6 Gb/s
capacity
Routing table size
32 entries (IPv4), 32 entries (IPv6)
MAC address table size 8192 entries
Operating temperature 32°F to 104°F (0°C to 40°C)
Operating relative
10% to 90%, noncondensing
humidity
Non-operating/Storage -40°F to 158°F (-40°C to 70°C)
temperature
Non-operating/Storage 10% to 95%, noncondensing
relative humidity
Frequency
50/60 Hz
Voltage
100-240 VAC
Maximum power rating22 W
Maximum power rating and maximum heat dissipation are the worst-case theoretical maximum
numbers provided for planning the infrastructure with fully loaded PoE (if equipped), 100% traffic,
all ports plugged in, and all modules populated.
IEC 60950-1; EN 60950-1; UL 60950-1 2nd Edition; CSA C22.2 No. 60950-1-07 2nd Edition
FCC part 15 Class A; VCCI Class A; EN 55022 Class A; CISPR 22 Class A; EN 55024; EN
61000-3-2 2000, 61000-3-3; ICES-003 Class A
IMC - Intelligent Management Center; limited command-line interface; Web browser; SNMP
Manager;
IEEE 802.3 Ethernet MIB
The HP 1910-24G Switch (JE006A) was formerly sold as the 3Com Baseline Plus 2928
(3CRBSG2893) and may ship with this product labeling.
SFP ports and copper ports can work simultaneously, independent of each other to give a total of
28 Gigabit-capable ports.
Refer to the HP website at: www.hp.com/networking/services for details on the service-level
descriptions and product numbers. For details about services and response times in your area,
please contact your local HP sales office.
DA - 13677 Worldwide QuickSpecs — Version 13 — 2.25.2014
Page 23
QuickSpecs
HP 1910 Switch Series
Technical Specifications
HP 1910-8-PoE+ Switch (JG537A)
Ports
8 RJ-45 autosensing 10/100 PoE+ ports (IEEE 802.3 Type 10BASE-T, IEEE 802.3u Type
100BASE-TX, IEEE 802.3at PoE+); Duplex: half or full
2 SFP dual-personality 1000 Mbps ports (IEEE 802.3ab Type 1000BASE-T)
1 RJ-45 console port to access limited CLI port
Supports a maximum of 8 autosensing 10/100 ports plus 2 1000BASE-X SFP ports, or a
combination
Physical
Dimensions
12.99(w) x 9.06(d) x 1.73(h) in (33 x 23 x 4.4 cm) (1U height)
characteristics
Weight
4.63 lb (2.1 kg)
Memory and processor Module
MIPS @ 500 MHz, 32 MB flash, 128 MB RAM; packet buffer size: 512
KB
Mounting
Mounts in an EIA-standard 19 in. telco rack or equipment cabinet (hardware included)
Performance
100 Mb Latency
< 5 µs
1000 Mb Latency
< 5 µs
Throughput
up to 4.2 Mpps (64-byte packets)
Routing/Switching
5.6 Gb/s
capacity
Routing table size
32 entries (IPv4), 32 entries (IPv6)
Environment
Electrical
characteristics
Safety
Emissions
Management
Notes
Services
MAC address table size 8192 entries
Operating temperature 32°F to 104°F (0°C to 40°C)
Operating relative
10% to 90%, noncondensing
humidity
Non-operating/Storage -40°F to 158°F (-40°C to 70°C)
temperature
Non-operating/Storage 10% to 95%, noncondensing
relative humidity
Frequency
50/60 Hz
Voltage
100-240 VAC
Maximum power rating90 W
PoE power
62 W
Maximum power rating and maximum heat dissipation are the worst-case theoretical maximum
numbers provided for planning the infrastructure with fully loaded PoE (if equipped), 100% traffic,
all ports plugged in, and all modules populated.
PoE Power is the power supplied by the internal power supply, it is dependent on the type and
quantity of power supplies and may be supplemented with the use of a External Power Supply
(EPS).
IEC 60950-1; EN 60950-1; UL 60950-1 2nd Edition; CSA C22.2 No. 60950-1-07 2nd Edition
FCC part 15 Class A; VCCI Class A; EN 55022 Class A; CISPR 22 Class A; EN 55024; EN
61000-3-2 2000, 61000-3-3; ICES-003 Class A
IMC - Intelligent Management Center; limited command-line interface; Web browser; SNMP
Manager;
IEEE 802.3 Ethernet MIB
The HP 1910-24G Switch (JE006A) was formerly sold as the 3Com Baseline Plus 2928
(3CRBSG2893) and may ship with this product labeling.
SFP ports and copper ports can work simultaneously, independent of each other to give a total of
28 Gigabit-capable ports.
Refer to the HP website at: www.hp.com/networking/services for details on the service-level
descriptions and product numbers. For details about services and response times in your area,
please contact your local HP sales office.
DA - 13677 Worldwide QuickSpecs — Version 13 — 2.25.2014
Page 24
QuickSpecs
HP 1910 Switch Series
Technical Specifications
HP 1910-24-PoE+ Switch (JG539A)
Ports
24 RJ-45 autosensing 10/100 PoE+ ports (IEEE 802.3 Type 10BASE-T, IEEE 802.3u Type
100BASE-TX, IEEE 802.3at PoE+); Duplex: half or full
2 SFP dual-personality 1000 Mbps ports (IEEE 802.3ab Type 1000BASE-T)
1 RJ-45 console port to access limited CLI port
Supports a maximum of 24 autosensing 10/100 ports plus 2 1000BASE-X SFP ports, or a
combination
Physical
Dimensions
17.32(w) x 9.37(d) x 1.73(h) in (44 x 23.8 x 4.4 cm) (1U height)
characteristics
Weight
7.28 lb (3.3 kg)
Memory and processor Module
MIPS @ 500 MHz, 32 MB flash, 128 MB RAM; packet buffer size: 512
KB
Mounting
Mounts in an EIA-standard 19 in. telco rack or equipment cabinet (hardware included)
Performance
100 Mb Latency
< 5 µs
1000 Mb Latency
< 5 µs
Throughput
up to 6.6 Mpps (64-byte packets)
Routing/Switching
8.8 Gb/s
capacity
Routing table size
32 entries (IPv4), 32 entries (IPv6)
Environment
Electrical
characteristics
Safety
Emissions
Management
Notes
Services
MAC address table size 8192 entries
Operating temperature 32°F to 104°F (0°C to 40°C)
Operating relative
10% to 90%, non-condensing
humidity
Non-operating/Storage -40°F to 158°F (-40°C to 70°C)
temperature
Non-operating/Storage 10% to 95%, noncondensing
relative humidity
Frequency
50/60 Hz
Voltage
100-240 VAC
Maximum power rating220 W
PoE power
180 W
Maximum power rating and maximum heat dissipation are the worst-case theoretical maximum
numbers provided for planning the infrastructure with fully loaded PoE (if equipped), 100% traffic,
all ports plugged in, and all modules populated.
PoE Power is the power supplied by the internal power supply, it is dependent on the type and
quantity of power supplies and may be supplemented with the use of a External Power Supply
(EPS).
IEC 60950-1; EN 60950-1; UL 60950-1 2nd Edition; CSA C22.2 No. 60950-1-07 2nd Edition
FCC part 15 Class A; VCCI Class A; EN 55022 Class A; CISPR 22 Class A; EN 55024; EN
61000-3-2 2000, 61000-3-3; ICES-003 Class A
IMC - Intelligent Management Center; limited command-line interface; Web browser;
SNMP Manager; IEEE 802.3 Ethernet MIB
The HP 1910-24G Switch (JE006A) was formerly sold as the 3Com Baseline Plus 2928
(3CRBSG2893) and may ship with this product labeling.
SFP ports and copper ports can work simultaneously, independent of each other to give a total of
28 Gigabit-capable ports.
Refer to the HP website at: www.hp.com/networking/services for details on the service-level
descriptions and product numbers. For details about services and response times in your area,
please contact your local HP sales office.
DA - 13677 Worldwide QuickSpecs — Version 13 — 2.25.2014
Page 25
QuickSpecs
HP 1910 Switch Series
Technical Specifications
Standards and
Device management
protocols
RFC 2819 RMON
(applies to all products in
series)
General protocols
IEEE 802.1D MAC Bridges
IEEE 802.1p Priority
IEEE 802.1Q VLANs
IEEE 802.1s (MSTP)
IEEE 802.1w Rapid Reconfiguration of Spanning Tree
IEEE 802.3 Type 10BASE-T
IEEE 802.3ab 1000BASE-T
IEEE 802.3ad Link Aggregation Control Protocol (LACP)
IEEE 802.3i 10BASE-T
IEEE 802.3x Flow Control
IEEE 802.3z 1000BASE-X
MIBs
RFC 1213 MIB II
RFC 1493 Bridge MIB
RFC 2021 RMONv2 MIB
RFC 2233 Interface MIB
RFC 2233 Interfaces MIB
RFC 2571 SNMP Framework MIB
RFC 2572 SNMP-MPD MIB
RFC 2573 SNMP-Notification MIB
RFC 2573 SNMP-Target MIB
RFC 2613 SMON MIB
RFC 2618 RADIUS Client MIB
RFC 2620 RADIUS Accounting MIB
RFC 2665 Ethernet-Like-MIB
RFC 2667 IP Tunnel MIB
RFC 2668 802.3 MAU MIB
RFC 2674 802.1p and IEEE 802.1Q Bridge MIB
RFC 2737 Entity MIB (Version 2)
RFC 3414 SNMP-User based-SM MIB
RFC 3415 SNMP-View based-ACM MIB
RFC 3418 MIB for SNMPv3
Network management
IEEE 802.1AB Link Layer Discovery Protocol (LLDP)
IEEE 802.1D (STP)
QoS/Cos
IEEE 802.1P (CoS)
Security
IEEE 802.1X Port Based Network Access Control
DA - 13677 Worldwide QuickSpecs — Version 13 — 2.25.2014
Page 26
QuickSpecs
HP 1910 Switch Series
Accessories
HP 1910 Switch Series Transceivers
accessories
HP X121 1G SFP LC SX Transceiver
HP X121 1G SFP LC LX Transceiver
HP X121 1G SFP RJ45 T Transceiver
HP X120 1G SFP LC SX Transceiver
HP X120 1G SFP LC LX Transceiver
HP X120 1G SFP RJ45 T Transceiver
Cables
HP .5m Multi-mode OM3 LC/LC Optical Cable
HP 1m Multi-mode OM3 LC/LC Optical Cable
HP 2m Multi-mode OM3 LC/LC Optical Cable
HP 5m Multi-mode OM3 LC/LC Optical Cable
HP 15m Multi-mode OM3 LC/LC Optical Cable
HP 30m Multi-mode OM3 LC/LC Optical Cable
HP 50m Multi-mode OM3 LC/LC Optical Cable
HP Premier Flex LC/LC Multi-mode OM4 2 fiber 1m Cable
HP Premier Flex LC/LC Multi-mode OM4 2 fiber 2m Cable
HP Premier Flex LC/LC Multi-mode OM4 2 fiber 5m Cable
HP Premier Flex LC/LC Multi-mode OM4 2 fiber 15m Cable
HP Premier Flex LC/LC Multi-mode OM4 2 fiber 30m Cable
HP Premier Flex LC/LC Multi-mode OM4 2 fiber 50m Cable
DA - 13677 Worldwide QuickSpecs — Version 13 — 2.25.2014
J4858C
J4859C
J8177C
JD118B
JD119B
JD089B
AJ833A
AJ834A
AJ835A
AJ836A
AJ837A
AJ838A
AJ839A
QK732A
QK733A
QK734A
QK735A
QK736A
QK737A
Page 27
QuickSpecs
HP 1910 Switch Series
Accessory Product Details
NOTE: Details are not available for all accessories. The following specifications were available at the time of publication.
HP X121 1G SFP LC SX Ports
Transceiver (J4858C) Physical
characteristics
A small form-factor
pluggable (SFP) Gigabit Environment
SX
transceiver that provides
a full-duplex Gigabit
solution
Electrical
up to 550 m on
characteristics
multimode fiber.
Cabling
1 LC 1000BASE-SX port; Duplex: full only
Dimensions: 2.24(d) x 0.54(w) x 0.48(h) in. (5.69 x 1.37 x 1.22 cm)
Weight: 0.04 lb. (0.02 kg)
Transceiver form factor: SFP
Operating temperature: 32°F to 158°F (0°C to 70°C)
Operating relative humidity: 5% to 85%, noncondensing
Nonoperating/Storage temperature: -40°F to 203°F (-40°C to 85°C)
Altitude: up to 10,000 ft. (3 km)
Power consumption typical: 0.4 W
Power consumption maximum: 0.7 W
Type:
62.5/125 µm or 50/125 µm (core/cladding) diameter, gradedindex, low metal content, multimode fiber optic, complying with
ITU-T G.651 and ISO/IEC 793-2 Type A1b or A1a, respectively;
Maximum distance:
Services
HP X121 1G SFP LC LX Ports
Transceiver (J4859C)
Physical
HP X121 1G SFP LC LX characteristics
Transceiver: An SFP
Environment
format
gigabit transceiver with
LC connectors using LX
technology.
Cabling
2-220 m (62.5 µm core diameter, 160 MHz*km bandwidth
2-275 m (62.5 µm core diameter, 200 MHz*km bandwidth
2-500 m (50 µm core diameter, 400 MHz*km bandwidth)
2-550 m (50 µm core diameter, 500 MHz*km bandwidth)
Cable length: 2-550m
Fiber type: Multi Mode
Refer to the HP website at www.hp.com/networking/services for details
on the service-level descriptions and product numbers. For details
about services and response times in your area, please contact your
local HP sales office.
1 LC 1000BASE-LX port (IEEE 802.3z Type 1000BASE-LX); Duplex:
full only
Dimensions: 2.24(d) x 0.54(w) x 0.486(h) in. (5.69 x 1.37 x 1.23 cm)
Weight:0.04 lb. (0.02 kg)
Operating temperature: 32°F to 158°F (0°C to 70°C)
Operating relative humidity: 0% to 85%, noncondensing
Nonoperating/Storage temperature: -40°F to 212°F (-40°C to 100°C)
Altitude: up to 10,000 ft. (3 km)
Type:
Either single mode or multimode; 62.5/125 µm or 50/125 µm
(core/cladding) diameter, graded-index, low metal content,
multimode fiber optic, complying with ITU-T G.651 and ISO/IEC
793-2 Type A1b or A1a, respectively; Low metal content, singlemode fiber-optic, complying with ITU-T G.652 and ISO/IEC 793-2
Type B1;
Maximum distance:
2-550 m (multimode 62.5 µm core diameter, 500 MHz*km
bandwidth)
2-550 m (multimode 50 µm core diameter, 400 MHz*km
bandwidth)
DA - 13677 Worldwide QuickSpecs — Version 13 — 2.25.2014
Page 28
QuickSpecs
HP 1910 Switch Series
Accessory Product Details
Notes
Services
HP X121 1G SFP RJ45 Ports
T Transceiver (J8177C)
Physical
HP X121 1G SFP RJ45 characteristics
T Transceiver: An SFP
Environment
format
gigabit transceiver with
RJ45 connectors using
1000BaseT technology.
2-550 m (multimode 50 µm core diameter, 500 MHz*km
bandwidth)
2-10,000 m (single-mode fiber)
A mode conditioning patch cord may be needed in some multimode
fiber installations.
Wavelength: 1310nm
Power Consumption: < 500mW Typical
Refer to the HP website at www.hp.com/networking/services for details
on the service-level descriptions and product numbers. For details
about services and response times in your area, please contact your
local HP sales office.
1 RJ-45 1000BASE-T port (IEEE 802.3ab Type 1000BASE-T); Duplex:
full only
Dimensions: 2.71(d) x 0.54(w) x 0.55(h) in. (6.88 x 1.37 x 1.4 cm)
Weight: 0.06 lb. (0.03 kg)
Operating temperature: 32°F to 158°F (0°C to 70°C); with 100 LFM
airflow over the SFP module
Operating relative humidity: 0% to 95% @ 75°F (25°C), noncondensing
Nonoperating/Storage temperature: -40°F to 185°F (-40°C to 85°C)
Nonoperating/Storage relative humidity: 0% to 95% @ 77°F (25°C),
noncondensing
Altitude: up to 10,000 ft. (3000 km)
Cabling
Cable type:
1000BASE-T: Category 5 (5E or better recommended), 100 Ù
differential 4-pair unshielded twisted pair (UTP) or shielded twisted pair
(STP) balanced, complying with IEEE 802.3ab 1000BASE-T;
Maximum distance:
100 m
Notes
Services
Power consumption is nominally 1 watt.
For supported platforms and minimum software requirements to support
this product, see the document titled "Support for the J8177C
1000Base-T Mini-GBIC" on the "HP Mini-GBICs and SFPs" Manuals
Web page.
The J8177C Gigabit copper mini-GBIC is not supported on dualpersonality ports.
The J8177C is capable of 100 Mb operation. This is supported on only
the HP E8200zl, E5400zl, and HP E6200-24G-mGBIC yl Switches using
software version K.12.21 or later. Use the "auto-100" port setting to
enable 100 Mb operation.
Important: The earlier J8177B does not support 100 Mb operation.
When used in the Switch gl 20-Port 10/100/1000 Module (J4908A), the
J8177C mini-GBIC can be installed in either the upper or lower miniGBIC
port, but will block access to the other port.
Refer to the HP website at www.hp.com/networking/services for details
on the service-level descriptions and product numbers. For details
about services and response times in your area, please contact your
local HP sales office.
DA - 13677 Worldwide QuickSpecs — Version 13 — 2.25.2014
Page 29
QuickSpecs
HP 1910 Switch Series
Accessory Product Details
HP X120 1G SFP LC SX Ports
Transceiver (JD118B) Connectivity
A small form-factor
pluggable (SFP) Gigabit
SX transceiver that
provides a full-duplex
Gigabit solution up to
550m on a Multimode
fiber.
Physical
characteristics
Electrical
characteristics
Cabling
Services
HP X120 1G SFP LC LX Ports
Transceiver (JD119B) Connectivity
A small form-factor
pluggable (SFP) Gigabig
LX transceiver that
provides a full duplex
Gigabit solution up to
550m on MMF or 10Km
on SMF
Physical
characteristics
Electrical
characteristics
Cabling
Services
1 LC 1000BASE-SX port
Connector type
LC
Wavelength
850 nm
Dimensions
2.17(d) x 0.6(w) x 0.46(h) in. (5.51 x 1.52 x
1.17 cm)
Full configuration
0.04 lb. (0.02 kg)
weight
Power consumption
0.8 W
typical
Power consumption
1.0 W
maximum
Maximum distance:
• FDDI Grade distance = 220m
• OM1 = 275m
• OM2 = 500m
• OM3 = Not Specified by standard
Cable length
up to 550m
Fiber type
Multi Mode
Refer to the HP website at www.hp.com/networking/services for details
on the service-level descriptions and product numbers. For details
about services and response times in your area, please contact your
local HP sales office.
1 SFP 1000BASE-LX port (IEEE 802.3z Type 1000BASE-LX)
Connector type
LC
Wavelength
1300 nm
Dimensions
2.17(d) x 0.6(w) x 0.46(h) in. (5.51 x 1.52 x
1.17 cm)
Full configuration
0.04 lb. (0.02 kg)
weight
Power consumption
0.8 W
typical
Power consumption
1.0 W
maximum
Cable type:
Either single mode or multimode;
Maximum distance:
• 550m for Multimode
• 10km for Singlemode
Fiber type
Both
Refer to the HP website at www.hp.com/networking/services for details
on the service-level descriptions and product numbers. For details
about services and response times in your area, please contact your
local HP sales office.
DA - 13677 Worldwide QuickSpecs — Version 13 — 2.25.2014
Page 30
QuickSpecs
HP 1910 Switch Series
Accessory Product Details
HP X120 1G SFP RJ45 Ports
T Transceiver (JD089B) Connectivity
Physical
characteristics
Electrical
characteristics
Cabling
Services
HP 0.5 m Multimode
OM3 LC/LC Optical
Cable (AJ833A)
Cabling
Notes
1 RJ-45 1000BASE-T port (IEEE 802.3ab Type 1000BASE-T)
Connector type
RJ-45
Dimensions
2.71(d) x 0.54(w) x 0.55(h) in. (6.88 x 1.37 x
1.4 cm)
Full configuration
0.07 lb. (0.03 kg)
weight
Power consumption
0.8 W
typical
Power consumption
1.0 W
maximum
Cable type:
1000BASE-T: Category 5 (5E or better recommended), 100 Ù
differential 4-pair unshielded twisted pair (UTP) or shielded twisted pair
(STP) balanced, complying with IEEE 802.3ab 1000BASE-T
Maximum distance:
• 100m
Refer to the HP website at www.hp.com/networking/services for details
on the service-level descriptions and product numbers. For details
about services and response times in your area, please contact your
local HP sales office.
Cable type:
50/125 µm (core/cladding) diameter, mulitimode fiber optic, with
effective modal bandwidth of 2000 MHz/km as detailed in TIA-492AAAC
for distances of up to 300 m
Maximum distance:
10Gbps Transfer Rate (Ethernet): 300m
Cable Specs: Tight buffered duplex fiber optic multimode OM3 50/125
um fiber optic cable and Ethernet assembly with LC duplex connectors
on one end and LC duplex connectors on other end.
Dimensions: Core diameter: 50 ± 3.0um Cladding diameter: 125 ±
2.0um Coating diameter: 245 ± 10um
Optical glass: Bandwidth: For LED sources: 1500/500 MHz-km
@850/1300nm.
Optical glass: Bandwidth: For Laser sources: 2000/500 MHz-km
@850/1300nm. VCSEL Laser sources: 600 / 600 meters
@850/1300nm for Gigabit Ethernet compliant links.
CABLE: The cable is duplex zipcord graded index 50/125um
multimode optical fiber and designed to work in both the 850 and
1300 nm wavelength windows.
BULK CABLE & CABLE ASSEMBLY CONFIGURATION:
Jacket Material: Riser Grade - Low Smoke Zero Halogen
thermoplastic.
Jacket Color: Aqua for OM3 multimode per TIA 598
Boot Color: White
Insertion Loss: less than 0.5 dB @ 850 with LED source, 0.003
dB/M added for lengths > 30 meters.
Maximum Cable attenuation: 3.0 dB/km @ 850 nm, 1.0 dB/Km @
1310 nm @ 23°C as tested in accordance with EIA 455-46.
Weight: Air Packed Weight: 1 LB Net Weight: 0.454Kg
DA - 13677 Worldwide QuickSpecs — Version 13 — 2.25.2014
Page 31
QuickSpecs
HP 1910 Switch Series
Accessory Product Details
Services
HP 1 m Multimode OM3 Cabling
LC/LC Optical Cable
(AJ834A)
Notes
Services
Refer to the HP website at www.hp.com/networking/services for details
on the service-level descriptions and product numbers. For details about
services and response times in your area, please contact your local HP
sales office.
Cable type:
50/125 µm (core/cladding) diameter, mulitimode fiber optic, with
effective modal bandwidth of 2000 MHz/km as detailed in TIA-492AAAC
for distances of up to 300 m
Maximum distance:
10Gbps Transfer Rate (Ethernet): 300m
Cable Specs: Tight buffered duplex fiber optic multimode OM3 50/125
um fiber optic cable and Ethernet assembly with LC duplex connectors
on one end and LC duplex connectors on other end.
Dimensions: Core diameter: 50 ± 3.0um Cladding diameter: 125 ±
2.0um Coating diameter: 245 ± 10um
Optical Glass Bandwidth: For LED sources: 1500/500 MHz-km
@850/1300nm.
Optical Glass: For Laser sources: 2000/500 MHz-km
@850/1300nm. VCSEL Laser sources: Shall achieve 600 / 600
meters @850/1300nm for Gigabit Ethernet compliant links.
CABLE: The cable is duplex zipcord graded index 50/125um
multimode optical fiber. The cable is designed to work in both the
850 and 1300 nm wavelength windows.
BULK CABLE & CABLE ASSEMBLY CONFIGURATION:
Jacket Material: Riser Grade - Low Smoke Zero Halogen
thermoplastic.
Jacket Color: Aqua for OM3 multimode per TIA 598
Boot Color: White
Insertion Loss: less than 0.5 dB @ 850 with LED source, 0.003
dB/M added for lengths > 30 meters.
Maximum Cable attenuation: 3.0 dB/km @ 850 nm, 1.0 dB/Km @
1310 nm @ 23°C as tested in accordance with EIA 455-46.
Weight: Air Packed Weight: 1 LB Net Weight: 0.454Kg
Refer to the HP website at www.hp.com/networking/services for details
on the service-level descriptions and product numbers. For details about
services and response times in your area, please contact your local HP
sales office.
DA - 13677 Worldwide QuickSpecs — Version 13 — 2.25.2014
Page 32
QuickSpecs
HP 1910 Switch Series
Accessory Product Details
HP 2 m Multimode OM3 Cabling
LC/LC Optical Cable
(AJ835A)
Notes
Services
HP 5 m Multimode OM3 Cabling
LC/LC Optical Cable
(AJ836A)
Notes
Cable type:
50/125 µm (core/cladding) diameter, mulitimode fiber optic, with
effective modal bandwidth of 2000 MHz/km as detailed in TIA-492AAAC
for distances of up to 300 m;
Maximum distance:
10Gbps Transfer Rate (Ethernet): 300m
Cable Specs: Tight buffered duplex fiber optic multimode OM3 50/125
um fiber optic cable and Ethernet assembly with LC duplex connectors
on one end and LC duplex connectors on other end.
Dimensions: Core diameter: 50 ± 3.0um Cladding diameter: 125 ±
2.0um Coating diameter: 245 ± 10um
Optical Glass Bandwidth: For LED sources: 1500/500 MHz-km
@850/1300nm.
Optical Glass: For Laser sources: 2000/500 MHz-km
@850/1300nm. VCSEL Laser sources: Shall achieve 600 / 600
meters @850/1300nm for Gigabit Ethernet compliant links.
CABLE: The cable is duplex zipcord graded index 50/125um
multimode optical fiber. The cable is designed to work in both the
850 and 1300 nm wavelength windows.
BULK CABLE & CABLE ASSEMBLY CONFIGURATION:
Jacket Material: Riser Grade - Low Smoke Zero Halogen
thermoplastic.
Jacket Color: Aqua for OM3 multimode per TIA 598
Boot Color: White
Insertion Loss: less than 0.5 dB @ 850 with LED source, 0.003
dB/M added for lengths > 30 meters.
Maximum Cable attenuation: 3.0 dB/km @ 850 nm, 1.0 dB/Km @
1310 nm @ 23°C as tested in accordance with EIA 455-46.
Weight: Air Packed Weight: 1 LB Net Weight: 0.454Kg
Refer to the HP website at www.hp.com/networking/services for details
on the service-level descriptions and product numbers. For details about
services and response times in your area, please contact your local HP
sales office.
Cable type:
50/125 µm core/cladding) diameter, mulitimode fiber optic, with effective
modal bandwidth of 2000 MHz/km as detailed in TIA-492AAAC for
distances of up to 300 m;
Maximum distance:
10Gbps Transfer Rate (Ethernet): 300m
Cable Specs: This specification defines the detail requirements for a
tight buffered duplex fiber optic multimode OM3 50/125 um fiber optic
cable and Ethernet assembly with LC duplex connectors on one end
and LC duplex connectors on other end.
Dimensions: Core diameter: 50 ± 3.0um Cladding diameter: 125 ±
2.0um Coating diameter: 245 ± 10um
Optical Glass Bandwidth: For LED sources: 1500/500 MHz-km
@850/1300nm.
Optical Glass: For Laser sources: 2000/500 MHz-km
@850/1300nm. VCSEL Laser sources: Shall achieve 600 / 600
meters @850/1300nm for Gigabit Ethernet compliant links.
CABLE: The cable is duplex zipcord graded index 50/125um
DA - 13677 Worldwide QuickSpecs — Version 13 — 2.25.2014
Page 33
QuickSpecs
HP 1910 Switch Series
Accessory Product Details
Services
HP 15 m Multimode
OM3 LC/LC Optical
Cable (AJ837A)
Cabling
Notes
Services
multimode optical fiber. The cable is designed to work in both the
850 and 1300 nm wavelength windows.
BULK CABLE & CABLE ASSEMBLY CONFIGURATION:
Jacket Material: Riser Grade - Low Smoke Zero Halogen
thermoplastic.
Jacket Color: Aqua for OM3 multimode per TIA 598
Boot Color: White
Insertion Loss: less than 0.5 dB @ 850 with LED source, 0.003
dB/M added for lengths > 30 meters.
Maximum Cable attenuation: 3.0 dB/km @ 850 nm, 1.0 dB/Km @
1310 nm @ 23°C as tested in accordance with EIA 455-46.
Weight: Air Packed Weight: 1 LB Net Weight: 0.454Kg
Refer to the HP website at www.hp.com/networking/services for details
on the service-level descriptions and product numbers. For details about
services and response times in your area, please contact your local HP
sales office.
Cable type:
50/125 µm (core/cladding) diameter, mulitimode fiber optic, with
effective modal bandwidth of 2000 MHz/km as detailed in TIA-492AAAC
for distances of up to 300 m;
Maximum distance:
10Gbps Transfer Rate (Ethernet): 300m
Cable Specs: Tight buffered duplex fiber optic multimode OM3 50/125
um fiber optic cable and Ethernet assembly with LC duplex connectors
on one end and LC duplex connectors on other end.
Dimensions: Core diameter: 50 ± 3.0um Cladding diameter: 125 ±
2.0um Coating diameter: 245 ± 10um
Optical Glass Bandwidth: For LED sources: 1500/500 MHz-km
@850/1300nm.
Optical Glass: For Laser sources: 2000/500 MHz-km
@850/1300nm. VCSEL Laser sources: Shall achieve 600 / 600
meters @850/1300nm for Gigabit Ethernet compliant links.
CABLE: The cable is duplex zipcord graded index 50/125um
multimode optical fiber. The cable is designed to work in both the
850 and 1300 nm wavelength windows.
BULK CABLE & CABLE ASSEMBLY CONFIGURATION:
Jacket Material: Riser Grade - Low Smoke Zero Halogen
thermoplastic.
Jacket Color: Aqua for OM3 multimode per TIA 598
Boot Color: White
Insertion Loss: less than 0.5 dB @ 850 with LED source, 0.003
dB/M added for lengths > 30 meters.
Maximum Cable attenuation: 3.0 dB/km @ 850 nm, 1.0 dB/Km @
1310 nm @ 23°C as tested in accordance with EIA 455-46.
Weight: Air Packed Weight: 1 LB Net Weight: 0.454Kg
Refer to the HP website at: www.hp.com/networking/services for details
on the service-level descriptions and product numbers. For details about
services and response times in your area, please contact your local HP
sales office.
DA - 13677 Worldwide QuickSpecs — Version 13 — 2.25.2014
Page 34
QuickSpecs
HP 1910 Switch Series
Accessory Product Details
HP 30 m Multimode
OM3 LC/LC Optical
Cable (AJ838A)
Cabling
Notes
Services
HP 50 m Multimode
OM3 LC/LC Optical
Cable (AJ839A)
Cabling
Notes
Cable type:
50/125 µm (core/cladding) diameter, mulitimode fiber optic, with
effective modal bandwidth of 2000 MHz/km as detailed in TIA-492AAAC
for distances of up to 300 m;
Maximum distance:
10Gbps Transfer Rate (Ethernet): 300m
Cable Specs: Tight buffered duplex fiber optic multimode OM3 50/125
um fiber optic cable and Ethernet assembly with LC duplex connectors
on one end and LC duplex connectors on other end.
Dimensions: Core diameter: 50 ± 3.0um Cladding diameter: 125 ±
2.0um Coating diameter: 245 ± 10um
Optical Glass Bandwidth: For LED sources: 1500/500 MHz-km
@850/1300nm.
Optical Glass: For Laser sources: 2000/500 MHz-km
@850/1300nm. VCSEL Laser sources: Shall achieve 600 / 600
meters @850/1300nm for Gigabit Ethernet compliant links.
CABLE: The cable is duplex zipcord graded index 50/125um
multimode optical fiber. The cable is designed to work in both the
850 and 1300 nm wavelength windows.
BULK CABLE & CABLE ASSEMBLY CONFIGURATION:
Jacket Material: Riser Grade - Low Smoke Zero Halogen
thermoplastic.
Jacket Color: Aqua for OM3 multimode per TIA 598
Boot Color: White
Insertion Loss: less than 0.5 dB @ 850 with LED source, 0.003
dB/M added for lengths > 30 meters.
Maximum Cable attenuation: 3.0 dB/km @ 850 nm, 1.0 dB/Km @
1310 nm @ 23°C as tested in accordance with EIA 455-46.
Weight: Air Packed Weight: 1 LB Net Weight: 0.454Kg
Refer to the HP website at: www.hp.com/networking/services for details
on the service-level descriptions and product numbers. For details about
services and response times in your area, please contact your local HP
sales office.
Cable type:
50/125 µm (core/cladding) diameter, mulitimode fiber optic, with
effective modal bandwidth of 2000 MHz/km as detailed in TIA-492AAAC
for distances of up to 300 m;
Maximum distance:
10Gbps Transfer Rate (Ethernet): 300m
Cable Specs: Tight buffered duplex fiber optic multimode OM3 50/125
um fiber optic cable and Ethernet assembly with LC duplex connectors
on one end and LC duplex connectors on other end.
Dimensions: Core diameter: 50 ± 3.0um Cladding diameter: 125 ±
2.0um Coating diameter: 245 ± 10um
Optical Glass Bandwidth: For LED sources: 1500/500 MHz-km
@850/1300nm.
Optical Glass: For Laser sources: 2000/500 MHz-km
@850/1300nm. VCSEL Laser sources: Shall achieve 600 / 600
meters @850/1300nm for Gigabit Ethernet compliant links.
CABLE: The cable is duplex zipcord graded index 50/125um
multimode optical fiber. The cable is designed to work in both the
DA - 13677 Worldwide QuickSpecs — Version 13 — 2.25.2014
Page 35
QuickSpecs
HP 1910 Switch Series
Accessory Product Details
Services
HP Premier Flex LC/LC Notes
Multi-mode OM4 2 fiber
1m Cable (QK732A)
Services
850 and 1300 nm wavelength windows.
BULK CABLE & CABLE ASSEMBLY CONFIGURATION:
Jacket Material: Riser Grade - Low Smoke Zero Halogen
thermoplastic.
Jacket Color: Aqua for OM3 multimode per TIA 598
Boot Color: White
Insertion Loss: less than 0.5 dB @ 850 with LED source, 0.003
dB/M added for lengths > 30 meters.
Maximum Cable attenuation: 3.0 dB/km @ 850 nm, 1.0 dB/Km @
1310 nm @ 23°C as tested in accordance with EIA 455-46.
Weight: Air Packed Weight: 1 LB Net Weight: 0.454Kg
Refer to the HP website at: www.hp.com/networking/services for details
on the service-level descriptions and product numbers. For details about
services and response times in your area, please contact your local HP
sales office.
Cable Specs: Graded-index, "bendable" fiber optic multimode OM3+
50/125um duplex cable and Ethernet assembly with LC duplex
connectors on each end.
• Core Diameter: 50um ±3um, Cladding diameter: 125um ±2um; Coating
diameter: 245 ± 10um
• Bandwidth: 3000 MHz-km @ 850nm (Laser)
• Jacket Color: Blue
• Jacket Material: Riser Grade – Low Smoke Zero Halogen (LSZH)
thermoplastic
• Boot Color: White
• Outer Jacket Print: HP PremierFlex OM3+ Fiber Optic Cable,
50/125um, Type OFNR (UL), LSZH, cUL, OFN FT4, ROHS. Cable also
has a longitudinal white stripe that runs the entire length of the cable.
• Insertion Loss: Less than 0.5dB @ 850nm with LED source,
0.003dB/m added for lengths >30m
• Maximum Cable Attenuation: 3.0 dB/km @ 850nm, 1.0 dB/km @
1310nm @ 23°C as tested in accordance with EIA 455-45
Refer to the HP website at www.hp.com/networking/services for details
on the service-level descriptions and product numbers. For details about
services and response times in your area, please contact your local HP
sales office.
DA - 13677 Worldwide QuickSpecs — Version 13 — 2.25.2014
Page 36
QuickSpecs
HP 1910 Switch Series
Accessory Product Details
HP Premier Flex LC/LC Notes
Multi-mode OM4 2 fiber
2m Cable (QK733A)
Services
HP Premier Flex LC/LC Notes
Multi-mode OM4 2 fiber
5m Cable (QK734A)
Services
Cable Specs: Graded-index, "bendable" fiber optic multimode OM3+
50/125um duplex cable and Ethernet assembly with LC duplex
connectors on each end.
• Core diameter: 50um ±3um, Cladding diameter: 125um ±2um; Coating
diameter: 245 ± 10um
• Bandwidth: 3000 MHz-km @ 850nm (Laser)
• Jacket Color: Blue
• Jacket Material: Riser Grade – Low Smoke Zero Halogen (LSZH)
thermoplastic
• Boot Color: White
• Outer Jacket Print: HP PremierFlex OM3+ Fiber Optic Cable,
50/125um, Type OFNR (UL), LSZH, cUL, OFN FT4, ROHS. Cable also
has a longitudinal white stripe that runs the entire length of the cable.
• Insertion Loss: Less than 0.5dB @ 850nm with LED source,
0.003dB/m added for lengths >30m
• Maximum Cable Attenuation: 3.0 dB/km @ 850nm, 1.0 dB/km @
1310nm @ 23°C as tested in accordance with EIA 455-45
Refer to the HP website at www.hp.com/networking/services for details
on the service-level descriptions and product numbers. For details about
services and response times in your area, please contact your local HP
sales office.
Cable Specs: Graded-index, "bendable" fiber optic multimode OM3+
50/125um duplex cable and Ethernet assembly with LC duplex
connectors on each end.
• Core diameter: 50um ±3um, Cladding diameter: 125um ±2um; Coating
diameter: 245 ± 10um
• Bandwidth: 3000 MHz-km @ 850nm (Laser)
• Jacket Color: Blue
• Jacket Material: Riser Grade – Low Smoke Zero Halogen (LSZH)
thermoplastic
• Boot Color: White
• Outer Jacket Print: HP PremierFlex OM3+ Fiber Optic Cable,
50/125um, Type OFNR (UL), LSZH, cUL, OFN FT4, ROHS. Cable also
has a longitudinal white stripe that runs the entire length of the cable.
• Insertion Loss: Less than 0.5dB @ 850nm with LED source,
0.003dB/m added for lengths >30m
• Maximum Cable Attenuation: 3.0 dB/km @ 850nm, 1.0 dB/km @
1310nm @ 23°C as tested in accordance with EIA 455-45
Refer to the HP website at www.hp.com/networking/services for details
on the service-level descriptions and product numbers. For details about
services and response times in your area, please contact your local HP
sales office.
DA - 13677 Worldwide QuickSpecs — Version 13 — 2.25.2014
Page 37
QuickSpecs
HP 1910 Switch Series
Accessory Product Details
HP Premier Flex LC/LC Notes
Multi-mode OM4 2 fiber
15m Cable (QK735A)
Services
HP Premier Flex LC/LC Notes
Multi-mode OM4 2 fiber
30m Cable (QK736A)
Services
Cable Specs: Graded-index, "bendable" fiber optic multimode OM3+
50/125um duplex cable and Ethernet assembly with LC duplex
connectors on each end.
• Core diameter: 50um ±3um, Cladding diameter: 125um ±2um; Coating
diameter: 245 ± 10um
• Bandwidth: 3000 MHz-km @ 850nm (Laser)
• Jacket Color: Blue
• Jacket Material: Riser Grade – Low Smoke Zero Halogen (LSZH)
thermoplastic
• Boot Color: White
• Outer Jacket Print: HP PremierFlex OM3+ Fiber Optic Cable,
50/125um, Type OFNR (UL), LSZH, cUL, OFN FT4, ROHS. Cable also
has a longitudinal white stripe that runs the entire length of the cable.
• Insertion Loss: Less than 0.5dB @ 850nm with LED source,
0.003dB/m added for lengths >30m
• Maximum Cable Attenuation: 3.0 dB/km @ 850nm, 1.0 dB/km @
1310nm @ 23°C as tested in accordance with EIA 455-45
Refer to the HP website at www.hp.com/networking/services for details
on the service-level descriptions and product numbers. For details about
services and response times in your area, please contact your local HP
sales office.
Cable Specs: Graded-index, "bendable" fiber optic multimode OM3+
50/125um duplex cable and Ethernet assembly with LC duplex
connectors on each end.
• Core diameter: 50um ±3um, Cladding diameter: 125um ±2um; Coating
diameter: 245 ± 10um
• Bandwidth: 3000 MHz-km @ 850nm (Laser)
• Jacket Color: Blue
• Jacket Material: Riser Grade – Low Smoke Zero Halogen (LSZH)
thermoplastic
• Boot Color: White
• Outer Jacket Print: HP PremierFlex OM3+ Fiber Optic Cable,
50/125um, Type OFNR (UL), LSZH, cUL, OFN FT4, ROHS. Cable also
has a longitudinal white stripe that runs the entire length of the cable.
• Insertion Loss: Less than 0.5dB @ 850nm with LED source,
0.003dB/m added for lengths >30m
• Maximum Cable Attenuation: 3.0 dB/km @ 850nm, 1.0 dB/km @
1310nm @ 23°C as tested in accordance with EIA 455-45
Refer to the HP website at www.hp.com/networking/services for details
on the service-level descriptions and product numbers. For details about
services and response times in your area, please contact your local HP
sales office.
DA - 13677 Worldwide QuickSpecs — Version 13 — 2.25.2014
Page 38
QuickSpecs
HP 1910 Switch Series
Accessory Product Details
HP Premier Flex LC/LC Notes
Multi-mode OM4 2 fiber
50m Cable (QK737A)
Services
Cable Specs: Graded-index, "bendable" fiber optic multimode OM3+
50/125um duplex cable and Ethernet assembly with LC duplex
connectors on each end.
• Core diameter: 50um ±3um, Cladding diameter: 125um ±2um; Coating
diameter: 245 ± 10um
• Bandwidth: 3000 MHz-km @ 850nm (Laser)
• Jacket Color: Blue
• Jacket Material: Riser Grade – Low Smoke Zero Halogen (LSZH)
thermoplastic
• Boot Color: White
• Outer Jacket Print: HP PremierFlex OM3+ Fiber Optic Cable,
50/125um, Type OFNR (UL), LSZH, cUL, OFN FT4, ROHS. Cable also
has a longitudinal white stripe that runs the entire length of the cable.
• Insertion Loss: Less than 0.5dB @ 850nm with LED source,
0.003dB/m added for lengths >30m
• Maximum Cable Attenuation: 3.0 dB/km @ 850nm, 1.0 dB/km @
1310nm @ 23°C as tested in accordance with EIA 455-45
Refer to the HP website at www.hp.com/networking/services for details
on the service-level descriptions and product numbers. For details about
services and response times in your area, please contact your local HP
sales office.
To learn more, visit: www.hp.com/networking
© Copyright 2010-2014 Hewlett-Packard Development Company, L.P. The information contained herein is subject to
change without notice. The only warranties for HP products and services are set forth in the express warranty statements
accompanying such products and services. Nothing herein should be construed as constituting an additional warranty. HP
shall not be liable for technical or editorial errors or omissions contained herein.
DA - 13677 Worldwide QuickSpecs — Version 13 — 2.25.2014
Page 39
Download PDF
Similar pages
BCDVideo Service Guide
4AA3-0705ENW
HP JE471A
HP 1900-8G Switch data sheet - US English
HP A7000dl Series Router
QuickSpecs
for surveillance cards FCC Information
Hewlett Packard Enterprise 7203dl
4AA0-4384ENW