advertisement
Before using your washing machine, please read this manual carefully and keep it for future reference.
Washing Machine
OWNER’S MANUAL
TERWM5TLA
Read This Manual
Inside you will find many helpful hints on how to use and maintain your washing machine properly.
Just a little preventative care on your part can save you a great deal of time and money over the life of your washing machine. You'll find many answers to common problems in the chart of troubleshooting tips. If you review the chart of
Troubleshooting Tips first, you may not need to call for service.
Notes
Contents
Safety and precautions........................................................................
2
Installation of the washer......................................................................
5
Preparation before washing..................................................................
7
Parts identification of the washer...........................................................
8
Instruction of the washer operation panel...............................................
9
Quick start..........................................................................................
11
The main wash....................................................................................
12
Special features..................................................................................
13
About the procedure of full automatic wash program.................................. 15
Cleaning and Maintenance of the washing machine..............................................
16
Identify usual trouble of washer..............................................................................
17
Malfunction display and solutions..........................................................
18
Technical specifications................................................................................
18
1
Safety and precautions
Observe the following items in order to prevent from injuring yourself, others and the damage of property:
Warning
Caution
This indicates serious injury or death to human being
may be caused.
This will remind you that injury to people and damage
to property may occur.
Please observe following contents of graphics.
!
This graphics represents[cause attention],and detailed cautions
will be displayed inside the graphics.
This graphics represents[operation prohibited], and detailed prohibitive items will be displayed inside the graphics.
This graphic represents [forcible execution], and detailed forcible execution items will be displayed inside the graphics.
Please do not disassembly and assembly the machine without authorization.
Warning
Please do not insert your hand and take out clothes inside the spin barrel before it is fully stopped.
No dismantling
Please do not install the machine in damp and raining environment to avoid electric shocking, catching fire, faults and distortion accidents.
No touching
Please do not directly rinse the machine with water when cleaning.
No dampness No rinsing
2
Please do not let children climb the machine or peer into the rotating spin barrel to avoid accidents.
Warning
It is prohibited to wash the clothes touching with kerosene, gasoline, alcohol and other flammable materials.
Prohibited
Prohibited
Please do not damage power flexible cord and power plug to avoid electric shocking, short circuit and catching fire.
Prohibited
Regularly clean the power plug to remove dust and dirt to avoid contact failure.
!
Please pull out plug from the socket if the machine is not in use.
Please well connect the earth line of socket to avoid electric shocking by accidental leakage.
(earthing)
Earthing
Pull out the plug
Please insert the power plug tightly.
!
3
Please do not place on the washer burning candle, mosquito-repellent incense, cigarette and other flammable things, as well as electric stove, air heating fan and other
heating
sources.
Smoke and fire prohibited
Please use correct power source.
Please do not pull out or insert the plug with wet hands to avoid electric shocking.
!
Wet hands are prohibited
Caution
Please ensure that the water inlet pipe is connected and the tap is opened before washing clothes.
+
!
The water temperature shall not exceed
50℃ when washing with warm water.
>50 C
Prohibited
Customers are not allowed to change the power line without permission.
It is strictly prohibited to place and sit children or lay weights on the washer.
Prohibited
Please do not pull the electric cord when pulling out the plug.
!
Prohibited
Please do not wash down jacket, raincoat, fishing coat and similar clothes in the washer.
Prohibited
4
Installation of the washer
Remove package
! Remove package and take out the bottom board of
the cabinet on the foam cover.
! Open the lid of washer's door and take out accessories.
! A trial operation or washing on the foamed cushion is
strictly forbidden.
Base foamed cushion
Installation of drain hose
Note: Use only the new supplied water hose with your new appliance do not use a hose from your existing machine or a hose that has been used previously.
! Completely seat the drain hose over the
drain connector. Installation of water
inlet hose.
! Fix and tighten it with a hoop. ( As shown
in the figure, and you can use a pliers to
finish it.)
Installation of water inlet hose
Put the water inlet pipe(which has metallic filtering bag) screw on to the tap.
Tightly screw another end of water inlet hose on water inlet valve .
(with rubber seal ring inside).
Note: When tightening the clamping nut, evenly apply the force and do not twist the water inlet valve to avoid breaking of water inlet valve joint.
Installation of water inlet hose
Clamping nut
Connector socket
Water inlet hose
Fastening screw
+
Lock nut
+
Water inlet adapter
The water inlet consists of connection socket and speedy connector.
Speedy connector
Slide jacket
5
Installation of the washer
Installation of water inlet pipe
+
1
+
2
Small ball
+
3
Push down the slide jacket to expose the small ball and enable separation of connector socket from speedy connector.
A
B
+
5mm
4
Junk ring
+
5
Unscrew four screws of part
A and sleeve part A horizontally over the mouth at the end of water tap (the mouth at the end of water tap must be flat and smooth. Flatten it by filing if it is not flat) and push it upward with force making the rubber washer firmly press the plane center of water tap mouth. Then tighten the screw sequentially.
After that, tightly screw on part B.
The connection socket consists of A and B two parts. Before installation,
A and B two parts must be unscrewed to about
5mm, or directly disconnected. If the bore of water tap is larger, remove the plastic junk ring of part A.
+
Connect
6
Connect: Push down the slide jacket of
speedy connector ( 4 small
balls must be exposed ),
insert it into the connection
socket and then push upward
Release the connection of
water tap with speedy
connector is completed. If it
is required to feed water,
simply open the water tap.
Separate
+
Separate: Close the water tap, push down
the slide jacket of speedy
connector and pull out the
speedy connector.
7
Clamping nut
Water inlet hose
Tightly screw another end of water inlet hose on water inlet valve . (with rubber seal ring inside).
Note: When tightening the clamping nut, evenly apply the force and do not twist the water inlet valve to avoid breaking of water inlet valve joint.
6
Preparation before washing
1
Adjust the adjustable foot making the washer be placed stable.
2
Install the water inlet hose. one inlet hose
Adjustable foot (extend when
clockwise rotating and shorten
when counterclockwise rotating)
(Slightly incline the washer first and loosen the adjustable foot knob. Adjust the adjustable foot so as to ensure four corners of washer be steadily contacted with the ground. Then tighten the adjustable foot knob and lock it. If the ground is obviously not flat, correction should be made on the ground surface, otherwise the washer barrel will incline and knock the cabinet)
3
Connect with power source.
two inlet hoses
5
Put down the drain house.
Gravity drain
6
Put in clothes and suitable amount of washing powder.
Upper drain
4
Open the water tap.
+
Note:
The water will overflow when the height of the drain hose under
750mm.
NOTICE
Before washing, please do take out coins, keys and other hard goods, and pull to close the zip fastener to prevent clothes and barrel from damage.
7
Parts identification of the washer
Hand door Gellar
Washing powder box
Upper drain hose
Inlet valve
Filter holder
Liquid scour and
bleacher inlet
Control panel
Handle
Power line
Impeller
Cabinet
Accessories
+
Inlet hose
8
Adjustable feet
Upper drain hose
Leavening agent injection port
Instruction of the washer operation panel
Program Selection
Before starting, continuously press this button for switching over among [Normal], [Jeans], [Soak], [Speedy ], [Delicate],
[Mini], [Bulky] and [Barrel Dry] programs.
Delay Start Time
User can set the delay start time at 4h / 8h /
12h separately. After the time you set runs
out, this machine will start to work with
the set program.
Start / Pause
[Start / Pause] button has both function of start and pause. Continuously press this button, the machine will be switched between start and pause mode.
Light/Vague
NORMAL
SOAK
JEANS
SPEEDY
Light/Vague
40L
32L
43L
36L
DELICATE
MINI
24L
28L
BULKY
BARREL DRY
16L 20L
PROGRAM
WATER
LEVEL
15min
12min
9min
6min
CHILD LOCK
WASH
RINSE recycle three twice once
5min
3min
2min
1min
TUB CLEAN
SPIN
12h
8h
4h
DELAY
ON
OFF
Children Lock
Press [Wash] & [Rinse] at same time,
display [Children Lock] is working.This
time, only power switch button is
available. Press [Wash] & [Rinse] again,
[Children Lock] will be canceled.
Water Level Selection
Level key for the user to select and change the amount of washing water. Selected on the left when the water level indicator light status for long, choose the right water level indicator is flashing state.
Wash Rinse Spin
[Wash], [Rinse] and [Spin], these three buttons represent the process of washing. Continuously pressing [Wash] button can change the washing time. Press [Rinse] button can select rinsing times. Press
[Spin] button can determine how long time will be spent for spin.
Power Supply
[On/Off] button has function of open or close the power supply.
9
10
Quick start
1 Install the washing
machine
2 Load the laundry
3 measure out the
detergent
9 Press the
[start/pause] key
8 Select the desired
programme
7 Plug the power supply
4 Close the
machine door
6 Turn on the water tap
5 Put down (hang up)
the drain pipe
Programme selection
1
Press the POWER button.
2 Select the proper water level or other attached functions .
3 To press the start/pause key.
The wash stops
When the wash stops, the buzzer will buzz continuously for 6 times and then the power will be automatically cut off.
Turn off the water tap .
Although the power can be cut off automatically, the power plug must be pull out as well for the safety.
11
The main wash
Instruction to the NORMAL program
! [Normal] wash program is the easiest, most convenient and most common washing
program. When the user press the power switch and then press [Start/Pause] button,
the normal washing program will start to work.
Steps in details
1.Press the power switch.
2.According to the washing amount choose the proper water level.
3.Press START/PAUSE button.
Instruction to single wash procedure
! User may freely select any single procedure, or any combination of procedures
among WASH, RINSE and SPIN according to the actual requirements. It is only
required to turn off any one or two of these three indicators that not needed by the
user. And keep the indicator be on showing the process needed by the user.
! Single wash -- after switching on the power, turn off RINSE and SPIN two indicators
by pressing these two keys. The operation for single rinse and single spin is similar.
! Single wash-spin – after switching on the power, turn off RINSE indicator by pressing
that key. The operation for single rinse-spin and single wash-rinse is similar.
Instruction to self-programmed procedure
! User can freely select any combination among WASH, RINSE and SPIN modes
according to the dirty degree of clothes.
Detail operation methods are following:
Continuously pressing the washing button to select washing time.
(6/9/12/15minutes, or no wash process)
Continuously pressing the rinse button to select rinse times.
(1~3 times, recycle, or no rinse process)
Continuously pressing the spin button to select the spin time.
(1/2/3/5 minutes or no spin process)
!
NOTICE
! Close the lid of the door when machine is running, otherwise, it will automatically
stop working during spin process and send out abnormal warning.
!The washer will not work when the filled water does not reach the set water level.
! After pressing down [ Power Switch ], if the [Start / Pause ] button is not pressed,
the power will be automatically cut off after 10 minutes.
12
Special features
SOAK
!
SOAK program is with strong water flow similar to normal washing program .
However,there is a motional soak process lasting about 30 minutes just before the washing process ,Thus it is used for washing more dirty clothes.
DELICATE
! DELICATE program is used for washing shirts or fabric of wool and cotton. It can
not wimple.
BULKY
! BULKY program is used for washing more Bulky clothing .such as sheet or quilt.
JEANS
! JEANS program is used for washing more dirtier clothes or bed sheets.
SPEEDY
!
SPEEDY program is used for washing the clothes not so dirty and the whole
washingprocess will be completed in about 25 minutes.
MINI
! MINI program is used for washing Small pieces of clothing. such as child clothing or
underwear and so on.
Special features
BARREL DRY
!
DRYING program is the special program of this washer. The spin barrel circumgyrate
in a high speed to make the outside of the barrel dryness. Controlling
the bacilli. Making the washing healthier.
NOTICE
!
! This program is used for dry the barrel and do not put the clothes in.
TUB CLEAN
It will be adhere to wash powder's residue inside and outside the barrel because of the pollution and the problem of the water quality. It will take smelly and the drain will not be flowing. Otherwise, the adhering residue will take off during the wash process. And the clothing will be dirty. User should clean the tub monthly.
NOTICE
!
! Please do not start the program continuously.
! You should take few chloric bleacher to enhance the effect of tub clean.
! This program is used for clean the barrel and do not put the clothes in.
13 14
Cleaning and Maintenance of the washing machine
NOTICE
!
Make sure to pull out the power plug before the cleaning and maintenance.
! Please keep the washer with neat appearance and perform correct
maintenance to prolong the service life of washer.
Cleaning of water inlet hose joint
Unscrew and remove the water inlet hose joint from the washer and clean the filtering screen of inlet valve with brush.
Cleaning of filtering bag
The special circulation water flow is designed for this washer, thus the flock powder and flock residues will be automatically collected into the filtering bag. After application, the user shall regularly clean the filtering bag to remove the flock powder and flock residues.
Detail operation methods are following:
Press it according to the arrowhead point . And you can discharge the frame of filtering bag.
Jack
Put the frame of filtering bag into the two jacks and push into emphatically as shown in figure above.
15
Identify usual trouble of washer
When the washer is in trouble, please contact local service office or the sales service department of our company and the customer should not dismantle the machine without permission.
If the washer can not work normally, or appear abnormity or alarms, please check and correct asfollows.
List of faults and inspection
Faults
Inspection Items
No water flows in
! If the power is off or the fuse is burned out.
! If the water supply is cut off or the water pressure is too low.
! If the inlet hose is properly connected and the water tap is opened.
! If the filtering screen of inlet valve is blocked by dirt.
! If the coil of inlet valve is damaged. (The slight electromagnetic
sound is normal phenomenon when the inlet valve is switched on)
! If the "Start / Pause" button is pressed after the power
switch is pressed.
No washing
! If the power is off or the fuse is burned out.
! If the power supply voltage is too low.
! If the water amount reaches to the required water level.
(The washer will not work if the water amount does not reach the
required water level)
! If it is set to "Delay" washing mode. (It will only start to work
until the reservation time reached)
Abnormal draining
! If the water drain hose is placed very high.
! If the end of water drain hose is sealed in pond.
! If the internal rubber ring of drain valve is blocked by dirt.
Abnormal
spin
! If the door lid is closed.
! If all clothing piled largely at one side of barrel or the clothing
is excessively placed.
! If the washer is not placed in stable condition or it is placed in
inclination state. (The ground is not flat).
! If the motor belt is loosened.
Note: During the de spin process, if washing are piled at one side of the spin barrel,
it will cause unbalance of spin barrel resulting in striking. At this moment, the
computer inside the washer will feel this unbalance phenomenon and will automatically
correct it ( fill in water Washing ). However, if unbalance situation is not removed after
continuous three corrections, which means the computer auto-correction can not
resolve the problem. Then the user has to manually and evenly place the clothing
inside the barrel to solve the problem.
16
Malfunction display and solutions
When the washer couldn’t work well,being abnormal or in alarm,please check and correct it as follows.
While the buzzer gives a bleep for 10 seconds,some program lights would be flickering.If failing in clearing of faults,the buzzer would give a 10seconds,bleep every 15minutes.When
this situation lasts over an hour,the power supply would be cut off automatically.
Flickering simultaneously
Causes Methods
NORMOL
SOAK
DELICATE
SOAK
DELICATE
BULKY
NORMOL
SOAK
BULKY
NORMOL
DELICATE
BULKY
NORMOL
SOAK
DELICATE
BULKY
Water flows into the washer abnormally.
Water drain time out.
Door is not closed.
Washings are partial to one side.
Alarm for water level sensor.
Open the water tap.
Water pressure is too low.Try to increase the inflow of water.
The drainpipe isn’t put down or needs unplugging.
Closed the door.
Please keep the clothes balance.
Repair
Malfunction display and solutions
Technical specifications
Rated power supply
Input power of motor
Rated washing capacity
Rated spin capacity
Overall dimensions
Application water pressure
Weight of whole machine
Washing mode
Draining mode
Spin mode
220V / 50Hz
420W
5.0kg
5.0kg
X
0.03MPa~0.8MPa
28kg
New water flow
Upper drain
Centrifugal spin
17 18
advertisement
* Your assessment is very important for improving the workof artificial intelligence, which forms the content of this project