ELECTRICAL SOLUTIONS
A.
System
Overview
B1.
Cable Ties
B2.
Cable
Accessories
Features and Benefits – Parallel-Entry Cable Ties
Parallel-entry cable ties limit exposure to sharp edges and protect workers’ arms/hands. The ties are designed with a low
profile head to avoid snags and reduce overall bundle size.
Contour-Ty ® Cable Ties
Hyper-V ™ Cable Ties
Fully enclosed head
for consistent strength
Design provides for
an optional threading
position that
allows releasable,
temporary bundling
B3.
Stainless
Steel Ties
Fully rounded edges
on head and strap
C1.
Wiring
Duct
C2.
Surface
Raceway
C3.
Abrasion
Protection
C4.
Cable
Management
D1.
Terminals
D2.
Power
Connectors
Fixed and
flexible 2-wedge
locking design
Outside teeth and
smooth round edges
protect cable jacket –
ideal for high vibration
applications
Curved tip
threads easily
and installs faster
Tip bending serrations
and threading hole
facilitate installations
in confined spaces
Rounded tip and
aggressive grip for
faster initial threading
IN-LINE Cable Ties
Belt-Ty ™ In-Line Cable Ties
Outside teeth
protect cable jacket
and wire insulation
D3.
Grounding
Connectors
“Finger grip” shaped
head assures positive grip
while threading tie
E1.
Labeling
Systems
E2.
Labels
E3.
Pre-Printed
& Write-On
Markers
E4.
Permanent
Identification
E5.
Lockout/
Tagout
& Safety
Solutions
F.
Index
B1.56
Parallel-entry limits
exposure to sharp edges
and protects workers’
arms/hands
“Finger grip” shaped
head with serrations
assures positive grip
while threading tie
Cable tie tools speed installation
and reduce total installed cost.
See pages B1.109 – B1.114.
Cable tie accessories are used to
speed and simplify the mounting of
wires, cables, and tubing.
See pages B2.1 – B2.29.
ELECTRICAL SOLUTIONS
A.
System
Overview
Selection Guide – Parallel-Entry Cable Ties
B1.
Cable Ties
B2.
Cable
Accessories
B3.
Stainless
Steel Ties
Material, Color (Suffix)
Style/Function
Nylon 6.6, Natural (No Suffix)
Locking Ties/Bundle
CBR
B1.58
Weather Resistant Nylon 6.6,
Black (0)
Locking Ties/Bundle
CBR
B1.59
Heat Stabilized Nylon 6.6, Black (30)
Locking Ties/Bundle
CBR
B1.60
Heat Stabilized Nylon 6.6, Natural (39)
Locking Ties/Bundle
CBR
B1.60
Flame Retardant Nylon 6.6, Ivory (69)
Locking Ties/Bundle
CBR
B1.60
Nylon 6.6, Natural (No Suffix)
Locking Ties/Bundle
ILT
B1.61
Weather Resistant Nylon 6.6, Black (0)
Locking Ties/Bundle
ILT
B1.61
Hyper-V ™
Cable Ties
Weather Resistant Nylon 6.6, Black (0)
Locking Ties/Bundle
HV
B1.62
IN-LINE
Cable Ties
Weather Resistant Nylon 6.6,
Black (0 and colors)
Locking Ties/Bundle
IT
B1.63
Contour-Ty ®
Cable Ties
Belt-Ty ™
In-Line
Cable Ties
Part Number Prefix
Catalog Page
C1.
Wiring
Duct
C2.
Surface
Raceway
C3.
Abrasion
Protection
C4.
Cable
Management
D1.
Terminals
D2.
Power
Connectors
D3.
Grounding
Connectors
Part Number System for Contour-Ty ® and Belt-Ty ™ Cable Ties
E1.
Labeling
Systems
CBR
2
S
M
Type
Size
Cross Section
Package Size
Material/Color
CBR = Locking Tie
ILT = Locking Tie
Approx.
Maximum
Bundle
Dia. (In.)
M = Miniature
I = Intermediate
S = Standard
HS = Heavy-Standard
LH = Light-Heavy
C
TL
D
M
See page
B1.64
—
=
=
=
=
100
250
500
1000
E2.
Labels
E3.
Pre-Printed
& Write-On
Markers
Part Number System for Hyper-V ™ and IN-LINE Cable Ties
HV
9
100
Type
Width
Size
Package Size
HV= Locking Tie
IT = Locking Tie
Approx.
Width (mm)
Approx.
Maximum
Bundle
Dia. (mm)
C = 100
—
E4.
Permanent
Identification
C
Material/Color
See page
B1.64
For technical assistance in the U.S., call 866-405-6654 (outside the U.S., see inside back cover for directory)
E5.
Lockout/
Tagout
& Safety
Solutions
F.
Index
B1.57
ELECTRICAL SOLUTIONS
A.
System
Overview
B1.
Cable Ties
B2.
Cable
Accessories
Contour-Ty ® Cable Ties – Nylon 6.6
•
•
•
•
For indoor use
Unique design prevents wire and cable damage
Low profile head avoids snags and reduces overall bundle size
Outside teeth and smooth round edges protect cable jacket – ideal
for high vibration applications
• Parallel-entry limits exposure to sharp edges and protects
workers’ arms/hands
• Fully enclosed head for consistent strength
• Curved tip is easy to pick up from flat surfaces and allows faster
initial threading to speed installation
• UL Listed for use in plenum or air handling spaces per NEC
Note: Nylon 6.6 cable ties in natural and colors meet the
testing requirements of the U.S. Military Aerospace
Standard SAE-AS23190A and the dimensional
requirements of Aerospace Standard SAE-AS33671
B3.
Stainless
Steel Ties
C1.
Wiring
Duct
C2.
Surface
Raceway
C3.
Abrasion
Protection
C4.
Cable
Management
Part Number
Length
In.
mm
Width
In.
mm
Max.
Bundle
Dia.
In.
mm
Thickness
In.
mm
Min.
Loop
Tensile Str.
Lbs.
N
Recommended
Installation
Tool
Std.
Pkg.
Qty.
Std.
Ctn.
Qty.
1000
1000
50000
50000
1000
25000
1000
25000
1000
1000
10000
10000
1000
10000
1000
1000
5000
5000
Miniature Cross Section – Plenum-Rated
CBR1M-M
CBR1.5M-M
4.1
5.6
104
142
.098
.098
2.5
2.5
.038
.042
1.0
1.1
1.00
1.50
25
38
18
18
80
80
CBR2M-M
7.2
183
.098
2.5
.042
1.1
2.00
51
18
80
GTS, GTSL, GS2B,
PTS, PPTS, STS2
Intermediate Cross Section – Plenum-Rated
D1.
Terminals
CBR1.5I-M
5.9
150
.140
3.6
.040
1.0
1.50
38
40
178
CBR3I-M
CBR4I-M
10.4
13.6
264
345
.140
.140
3.6
3.6
.052
.052
1.3
1.3
3.00
4.00
76
102
40
40
178
178
GTS, GTSL, GS2B,
PTS, PPTS, STS2
Standard Cross Section – Plenum-Rated
D2.
Power
Connectors
D3.
Grounding
Connectors
CBR2S-M
7.6
193
.190
4.8
.044
1.1
2.00
51
50
222
CBR3S-M
CBR4S-M
10.8
14.0
274
356
.190
.190
4.8
4.8
.052
.052
1.3
1.3
3.00
4.00
76
102
50
50
222
222
.058
1.4
2.00
51
85
378
GTH, GS4H, GS4EH,
PTH, STH2, ST3EH
500
5000
.070
.070
1.8
1.8
4.00
6.00
102
152
120
120
534
534
GTH, GS4H, GS4EH,
PTH, STH2, ST3EH
250
2500
100
2000
GTS, GTSL, GS2B,
GTH, GS4H, PTS, PTH,
PPTS, STS2, STH2
Heavy-Standard Cross Section – Plenum-Rated
CBR2HS-D
8.0
203
.250
6.4
Light-Heavy Cross Section – Plenum-Rated
E1.
Labeling
Systems
CBR4LH-TL
CBR6LH-C
14.6
20.9
371
531
.300
.300
7.6
7.6
E2.
Labels
E3.
Pre-Printed
& Write-On
Markers
E4.
Permanent
Identification
E5.
Lockout/
Tagout
& Safety
Solutions
F.
Index
B1.58
Order number of pieces required, in multiples of Standard Package Quantity.
Prime items appear in BOLD.
ELECTRICAL SOLUTIONS
A.
System
Overview
Contour-Ty ® Cable Ties – Weather Resistant Nylon 6.6
• Greater resistance to damage caused by ultraviolet light –
indoor or outdoor use
• Unique design prevents wire and cable damage
• Low profile head avoids snags and reduces overall bundle size
• Outside teeth and smooth round edges protect cable jacket –
ideal for high vibration applications
• Parallel-entry limits exposure to sharp edges and protects
workers’ arms/hands
• Fully enclosed head for consistent strength
• Curved tip is easy to pick up from flat surfaces and allows faster
initial threading to speed installation
B1.
Cable Ties
B2.
Cable
Accessories
B3.
Stainless
Steel Ties
C1.
Wiring
Duct
Part Number
Length
In.
mm
Width
In.
mm
Thickness
In.
mm
Max.
Bundle
Dia.
Min.
Loop
Tensile Str.
In.
mm
Lbs.
N
1.00
1.50
2.00
25
38
51
18
18
18
80
80
80
Recommended
Installation
Tool
Std.
Pkg.
Qty.
Std.
Ctn.
Qty.
GTS, GTSL, GS2B,
PTS, PPTS, STS2
1000
1000
1000
50000
50000
25000
Miniature Cross Section
CBR1M-M0
CBR1.5M-M0
CBR2M-M0
4.1
5.6
7.2
104
142
183
.098
.098
.098
2.5
2.5
2.5
.038
.042
.042
1.0
1.1
1.1
Intermediate Cross Section
CBR1.5I-M0
CBR3I-M0
CBR4I-M0
5.9
10.4
13.6
1000
25000
1000
1000
10000
10000
1000
10000
1000
1000
5000
5000
GTH, GS4H, GS4EH,
PTH, STH2, ST3EH
500
5000
GTH, GS4H, GS4EH,
PTH, STH2, ST3EH
250
2500
100
2000
150
264
345
.140
.140
.140
3.6
3.6
3.6
.040
.052
.052
1.0
1.3
1.3
1.50
3.00
4.00
38
76
102
40
40
40
178
178
178
GTS, GTSL, GS2B,
PTS, PPTS, STS2
193
274
356
.190
.190
.190
4.8
4.8
4.8
.044
.052
.052
1.1
1.3
1.3
2.00
3.00
4.00
51
76
102
50
50
50
222
222
222
GTS, GTSL, GS2B,
GTH, GS4H, PTS, PTH,
PPTS, STS2, STH2
.250
6.4
.058
1.4
2.00
51
85
378
Standard Cross Section
CBR2S-M0
CBR3S-M0
CBR4S-M0
7.6
10.8
14.0
Heavy-Standard Cross Section
CBR2HS-D0
8.0
203
Light-Heavy Cross Section
CBR4LH-TL0
CBR6LH-C0
14.6
20.9
371
531
.300
.300
7.6
7.6
.070
.070
1.8
1.8
4.00
6.00
102
152
120
120
534
534
C2.
Surface
Raceway
C3.
Abrasion
Protection
C4.
Cable
Management
D1.
Terminals
D2.
Power
Connectors
D3.
Grounding
Connectors
E1.
Labeling
Systems
E2.
Labels
E3.
Pre-Printed
& Write-On
Markers
E4.
Permanent
Identification
E5.
Lockout/
Tagout
& Safety
Solutions
F.
Index
For technical assistance in the U.S., call 866-405-6654 (outside the U.S., see inside back cover for directory)
B1.59
ELECTRICAL SOLUTIONS
A.
System
Overview
B1.
Cable Ties
B2.
Cable
Accessories
Contour-Ty ® Cable Ties – Heat Stabilized and
Flame Retardant Nylon 6.6
• Outside teeth and smooth round edges protect cable jacket –
ideal for high vibration applications
• Parallel-entry limits exposure to sharp edges and protects workers’
arms/hands
• Fully enclosed head for consistent strength
• Curved tip is easy to pick up from flat surfaces and allows faster
initial threading to speed installation
• Heat stabilized material for high temperature applications
up to 239°F (115°C) – indoor use
• Flame retardant material has a flammability rating of UL 94V-0 –
indoor use
• Unique design prevents wire and cable damage
• Low profile head avoids snags and reduces overall bundle size
B3.
Stainless
Steel Ties
C1.
Wiring
Duct
C2.
Surface
Raceway
C3.
Abrasion
Protection
CBR2S-M30
Part Number
CBR2S-M39
Length
In.
mm.
CBR3S-M69
Width
In.
mm
Thickness
In.
mm
Max.
Bundle
Dia.
In.
mm
Min.
Loop
Tensile Str.
Lbs.
N
Recommended
Installation
Tool
Std.
Pkg.
Qty.
Std.
Ctn.
Qty.
Heat Stabilized Nylon 6.6 – Black
C4.
Cable
Management
D1.
Terminals
Miniature Cross Section
CBR1M-M30
4.1
104
.098
2.5
.038
1.0
1.00
25
18
80
GTS, GTSL, GS2B,
PTS, PPTS, STS2
1000
50000
150
.140
3.6
.040
1.0
1.50
38
40
178
GTS, GTSL, GS2B,
PTS, PPTS, STS2
1000
25000
1000
10000
1000
5000
1000
5000
250
2500
100
2000
1000
10000
1000
5000
Intermediate Cross Section
CBR1.5I-M30
5.9
Standard Cross Section
D2.
Power
Connectors
D3.
Grounding
Connectors
E1.
Labeling
Systems
CBR2S-M30
7.6
193
.190
4.8
.044
1.1
2.00
51
50
222
CBR3S-M30
10.8
274
.190
4.8
.052
1.3
3.00
76
50
222
CBR4S-M30
14.0
356
.190
4.8
.052
1.3
4.00
102
50
222
Light-Heavy Cross Section
CBR4LH-TL30
14.6
371
.300
7.6
.070
1.8
4.00
102
120
534
CBR6LH-C30
20.9
531
.300
7.6
.070
1.8
6.00
152
120
534
1.1
2.00
51
50
222
3.00
76
50
222
Standard Cross Section
7.6
193
.190
4.8
.044
E2.
Labels
E4.
Permanent
Identification
GTH, GS4H, GS4EH,
PTH, STH2, ST3EH
Heat Stabilized Nylon 6.6 – Natural
CBR2S-M39
E3.
Pre-Printed
& Write-On
Markers
GTS, GTSL, GS2B,
GTH, GS4H, PTS,
PTH, PPTS,
STS2, STH2
GTS, GTSL, GS2B,
GTH, GS4H, PTS,
PTH, PPTS,
STS2, STH2
Flame Retardant Nylon 6.6 – Natural Ivory
Standard Cross Section
CBR3S-M69
10.8
274
.190
4.8
.052
1.3
GTS, GTSL, GS2B,
GTH, GS4H, PTS,
PTH, PPTS,
STS2, STH2
Note: UL Recognized, UL Listed, and CSA Certified, except CBR3S-M69.
E5.
Lockout/
Tagout
& Safety
Solutions
F.
Index
B1.60
Order number of pieces required, in multiples of Standard Package Quantity.
Prime items appear in BOLD.
ELECTRICAL SOLUTIONS
Belt-Ty ™ In-Line Cable Ties – Nylon and Weather Resistant Nylon 6.6
• Natural nylon material for indoor use
• Weather resistant material has greater resistance to damage
caused by ultraviolet light – indoor or outdoor use
• Parallel-entry cable tie that threads like a belt (180° entry)
• Low profile head avoids snags and reduces overall bundle size
• 35% lower head height than conventional 90° ties
• Parallel-entry limits exposure to sharp edges and protects workers’
arms/hands
• Curved tip is easy to pick up from flat surfaces and allows faster
initial threading to speed installation
• Nylon 6.6 cable ties are UL Listed for use in plenum or air handling
spaces per NEC
A.
System
Overview
B1.
Cable Ties
B2.
Cable
Accessories
B3.
Stainless
Steel Ties
C1.
Wiring
Duct
ILT2S-C
ILT2S-C0
Length
Part Number
In.
mm
Width
In.
mm
Max.
Bundle
Dia.
Min.
Loop
Tensile Str.
C2.
Surface
Raceway
In.
mm
In.
mm
Lbs.
N
Recommended
Installation
Tool
.052
.052
.052
1.3
1.3
1.3
1.88
3.00
4.00
48
76
102
50
50
50
222
222
222
GTS, GTSL, GS2B,
GTH, GS4H, PTS,
PTH, PPTS, STS2,
STH2
100
100
100
1000
1000
1000
.075
.075
1.9
1.9
4.00
6.00
102
152
120
120
534
534
GTH, GS4H, GS4EH,
PTH, STH2, ST3EH
250
2500
100
2000
Thickness
Std.
Pkg.
Qty.
Std.
Ctn.
Qty.
Nylon 6.6
C3.
Abrasion
Protection
Standard Cross Section – Plenum-Rated
ILT2S-C
ILT3S-C
ILT4S-C
8.3
11.5
14.7
211
292
373
.190
.190
.190
4.8
4.8
4.8
Light-Heavy Cross Section – Plenum-Rated
ILT4LH-TL
ILT6LH-C
14.8
21.2
376
538
.300
.300
7.6
7.6
Weather Resistant Nylon 6.6
Standard Cross Section
ILT2S-C0
ILT3S-C0
ILT4S-C0
8.3
11.5
14.7
211
292
373
.190
.190
.190
4.8
4.8
4.8
.052
.052
.052
1.3
1.3
1.3
1.88
3.00
4.00
48
76
102
50
50
50
222
222
222
GTS, GTSL, GS2B,
GTH, GS4H, PTS,
PTH, PPTS,
STS2, STH2
100
100
100
1000
1000
1000
.300
.300
7.6
7.6
.075
.075
1.9
1.9
4.00
6.00
102
152
120
120
534
534
GTH, GS4H, GS4EH,
PTH, STH2, ST3EH
250
100
2500
2000
Light-Heavy Cross Section
ILT4LH-TL0
ILT6LH-C0
14.8
21.2
376
538
Weather resistant nylon 6.6 cable ties are UL Recognized, UL Listed, and CSA Certified, except ILT4LH/6LH.
C4.
Cable
Management
D1.
Terminals
D2.
Power
Connectors
D3.
Grounding
Connectors
E1.
Labeling
Systems
E2.
Labels
E3.
Pre-Printed
& Write-On
Markers
E4.
Permanent
Identification
E5.
Lockout/
Tagout
& Safety
Solutions
F.
Index
For technical assistance in the U.S., call 866-405-6654 (outside the U.S., see inside back cover for directory)
B1.61
ELECTRICAL SOLUTIONS
A.
System
Overview
B1.
Cable Ties
B2.
Cable
Accessories
B3.
Stainless
Steel Ties
Hyper-V ™ In-Line Cable Ties – Weather Resistant Nylon 6.6
• Fixed and flexible two-wedge locking design provides
a low threading force
• Teeth on both sides of cable tie body provide additional locking
strength and improved flexibility to conform to irregular bundle
shapes such as securing cables to cable tray systems
• Releasable head position for temporary bundling of cables prior
to final locking; no need to replace ties when adding cables/wires
to the bundle
• Teeth on full length of body support a wide range
of bundle diameters
• Bending serrations on the tip of the tie allow the tip to be easily
formed into an arc, enabling installer to “fish” the tie around the
bundle in a confined space
• Threading hole in the tip of the tie allows an installer to hook
the tip with a simple device to pull the tie through spaces with
limited access
• In-Line tie design for parallel-entry of the tie into head resulting
in a lower profile on cable bundles
• Complementary mounts shown below
C1.
Wiring
Duct
C2.
Surface
Raceway
C3.
Abrasion
Protection
C4.
Cable
Management
Part Number
HV965-C0
HV9100-C0
HV9150-C0
HV9250-C0
Length
In.
mm
10.4
265
14.4
367
20.7
525
33.1
841
Width
In.
mm
.350
8.9
.350
8.9
.350
8.9
.350
8.9
Thickness
In.
mm
.076
1.9
.076
1.9
.076
1.9
.076
1.9
Max.
Bundle
Dia.
In.
mm
2.60
65
3.90
100
5.90
150
9.80
250
Min. Loop
Tensile Str.
Lbs.
N
160
710
160
710
160
710
160
710
Recommended
Installation
Tool
Std.
Pkg.
Qty.
100
GTH, GS4H,
100
GS4EH, PTH, STH2,
100
ST3EH, STHV
100
Std.
Ctn.
Qty.
1000
1000
1000
1000
D1.
Terminals
D2.
Power
Connectors
D3.
Grounding
Connectors
Hyper-V ™ Cable Tie Mounts
• Tie mount has retaining tab within window to hold cable tie
in position when pre-installed in the mount; low profile design
keeps bundle close to mounting surface
• Masonry mounts are used to secure wire, cable, or tubing
to masonry surfaces
• For outdoor use
E1.
Labeling
Systems
E2.
Labels
HVTM
E3.
Pre-Printed
& Write-On
Markers
E4.
Permanent
Identification
Part Number
Mounting Method
Std.
Pkg.
Qty.
Std.
Ctn.
Qty.
Material
Color
HVTM3S10-C0 Weather Resistant Nylon 6.6
Black
#10 (6mm) screw
100
500
Black
Tree barb for .31" (7.9mm) hole diameter
100
500
Tie Mounts
Masonry Mounts
HVMPM32-C0
E5.
Lockout/
Tagout
& Safety
Solutions
HVMPM
Impact Modified Weather Resistant Nylon 6.6
Note: UL Recognized except HVTM mount.
F.
Index
B1.62
Order number of pieces required, in multiples of Standard Package Quantity.
Prime items appear in BOLD.
ELECTRICAL SOLUTIONS
A.
System
Overview
IN-LINE Cable Ties – Weather Resistant Nylon 6.6
• “Finger grip” shaped head with serrations assures positive
grip while threading tie
• Install by hand or use Panduit GTH installation tool,
see page B1.111
• Flexible – easy to handle and install
• Available in UV weather resistant colors for color coordination
and UV stability
• Greater resistance to damage caused by ultraviolet light –
indoor or outdoor use
• Parallel-entry cable tie that threads like a belt (180° entry)
• Wide tie body provides high tensile strength
• 50% lower head height than conventional 90° ties
• Parallel-entry limits exposure to sharp edges and protects
workers’ arms/hands
• Outside teeth protect cable jacket and wire insulation
B1.
Cable Ties
B2.
Cable
Accessories
B3.
Stainless
Steel Ties
C1.
Wiring
Duct
Part Number
Color
Length
In.
mm
Width
In.
mm
Thickness
In.
mm
Max.
Bundle
Dia.
In.
mm
C2.
Surface
Raceway
Min.
Loop
Tensile Str.
Lbs.
N
Std.
Pkg.
Qty
Std.
Ctn.
Qty.
Black Cable Ties
IT940-C0
IT965-C0
UV Black
UV Black
6.8
10.1
173
257
.350
.350
8.9
8.9
.065
.065
1.7
1.7
1.57
2.56
40
65
124
124
552
552
100
100
1000
1000
IT9100-C0
IT9115-C0
UV Black
UV Black
14.1
15.3
358
389
.350
.350
8.9
8.9
.065
.065
1.7
1.7
3.94
4.53
100
115
124
124
552
552
100
100
1000
1000
14.1
14.1
14.1
14.1
14.1
14.1
14.1
15.3
15.3
15.3
15.3
15.3
15.3
15.3
15.3
15.3
15.3
15.3
15.3
15.3
15.3
358
358
358
358
358
358
358
389
389
389
389
389
389
389
389
389
389
389
389
389
389
.350
.350
.350
.350
.350
.350
.350
.350
.350
.350
.350
.350
.350
.350
.350
.350
.350
.350
.350
.350
.350
8.9
8.9
8.9
8.9
8.9
8.9
8.9
8.9
8.9
8.9
8.9
8.9
8.9
8.9
8.9
8.9
8.9
8.9
8.9
8.9
8.9
.065
.065
.065
.065
.065
.065
.065
.065
.065
.065
.065
.065
.065
.065
.065
.065
.065
.065
.065
.065
.065
1.7
1.7
1.7
1.7
1.7
1.7
1.7
1.7
1.7
1.7
1.7
1.7
1.7
1.7
1.7
1.7
1.7
1.7
1.7
1.7
1.7
3.94
3.94
3.94
3.94
3.94
3.94
3.94
4.53
4.53
4.53
4.53
4.53
4.53
4.53
4.53
4.53
4.53
4.53
4.53
4.53
4.53
100
100
100
100
100
100
100
115
115
115
115
115
115
115
115
115
115
115
115
115
115
124
124
124
124
124
124
124
124
124
124
124
124
124
124
124
124
124
124
124
124
124
552
552
552
552
552
552
552
552
552
552
552
552
552
552
552
552
552
552
552
552
552
100
100
100
100
100
100
100
100
100
100
100
100
100
100
100
100
100
100
100
100
100
1000
1000
1000
1000
1000
1000
1000
1000
1000
1000
1000
1000
1000
1000
1000
1000
1000
1000
1000
1000
1000
C3.
Abrasion
Protection
C4.
Cable
Management
Colored Cable Ties
IT9100-CUV2
IT9100-CUV4Y
IT9100-CUV6
IT9100-CUV6A
IT9100-CUV7A
IT9100-CUV8
IT9100-CUV16B
IT9115-CUV2
IT9115-CUV2A
IT9115-CUV4Y
IT9115-CUV4A
IT9115-CUV5A
IT9115-CUV5B
IT9115-CUV6
IT9115-CUV6A
IT9115-CUV6B
IT9115-CUV7A
IT9115-CUV8
IT9115-CUV11
IT9115-CUV16B
IT9115-CUV18
UV Red
UV Yellow
UV Dark Blue
UV Light Blue
UV Purple
UV Silver
UV Magenta
UV Red
UV Bright Red
UV Yellow
UV Butterscotch
UV Green
UV Hunter Green
UV Dark Blue
UV Light Blue
UV Cobalt Blue
UV Purple
UV Gray
UV Teal
UV Magenta
UV Tan
D1.
Terminals
D2.
Power
Connectors
D3.
Grounding
Connectors
E1.
Labeling
Systems
E2.
Labels
E3.
Pre-Printed
& Write-On
Markers
E4.
Permanent
Identification
E5.
Lockout/
Tagout
& Safety
Solutions
F.
Index
For technical assistance in the U.S., call 866-405-6654 (outside the U.S., see inside back cover for directory)
B1.63
ELECTRICAL SOLUTIONS
A.
System
Overview
Parallel-Entry Cable Ties
B1.
Cable Ties
Material and Color Chart
B2.
Cable
Accessories
B3.
Stainless
Steel Ties
C1.
Wiring
Duct
C2.
Surface
Raceway
C3.
Abrasion
Protection
Panduit
Material
Nylon 6.6
Weather Resistant Nylon 6.6
Nylon 6.6
Nylon 6.6
Nylon 6.6
Nylon 6.6
Nylon 6.6
Nylon 6.6
Nylon 6.6
Nylon 6.6
Nylon 6.6
Heat Stabilized Nylon 6.6
Heat Stabilized Nylon 6.6
Flame Retardant Nylon 6.6
Color
Natural
Black
Brown
Red
Orange
Yellow
Green
Blue
Purple
Gray
White
Black
Natural
Natural (Ivory)
Standard Packaging
Natural
Nylon 6.6
Material/Color (Suffix)
D1.
Terminals
D2.
Power
Connectors
D3.
Grounding
Connectors
E1.
Labeling
Systems
E4.
Permanent
Identification
E5.
Lockout/
Tagout
& Safety
Solutions
F.
Index
B1.64
Color
Suffix
Ultraviolet Red
UV2
Ultraviolet Bright Red
UV2A
Ultraviolet Yellow
UV4Y
Ultraviolet Butterscotch
UV4A
Ultraviolet Green
UV5A
Ultraviolet Hunter Green UV5B
Ultraviolet Dark Blue
UV6
Ultraviolet Light Blue
UV6A
Ultraviolet Cobalt Blue
UV6B
Ultraviolet Purple
UV7A
Ultraviolet Gray
UV8
Ultraviolet Teal
UV11
Ultraviolet Magenta
UV16B
Ultraviolet Tan
UV18
Part Number Availability List
Part Number
E3.
Pre-Printed
& Write-On
Markers
Panduit
Material
Nylon 6.6
Nylon 6.6
Nylon 6.6
Nylon 6.6
Nylon 6.6
Nylon 6.6
Nylon 6.6
Nylon 6.6
Nylon 6.6
Nylon 6.6
Nylon 6.6
Nylon 6.6
Nylon 6.6
Nylon 6.6
✓Denotes Panduit Natural Nylon 6.6 (no suffix).
C4.
Cable
Management
E2.
Labels
Suffix
✓
0
1
2
3
4Y
5
6
7
8
10
30
39
69
ILT2S-C
ILT3S-C
ILT4S-C
✓
✓
✓
0
0
0
Bulk Packaging
Part Number
CBR1M-M
CBR1.5M-M
CBR2M-M
CBR1.5I-M
CBR3I-M
CBR4I-M
CBR2S-M
CBR3S-M
CBR4S-M
CBR2HS-D
CBR4LH-TL
CBR6LH-C
HV965-C
HV9100-C
HV9150-C
HV9250-C
ILT2S-M
ILT3S-M
ILT4S-M
ILT4LH-TL
ILT6LH-C
IT940-C
IT965-C
IT9100-C
IT9115-C
Natural
Nylon 6.6
✓
✓
✓
✓
✓
✓
✓
✓
✓
✓
✓
✓
✓
✓
✓
✓
✓
Material/Color (Suffix)
0,30
0
0,1,2,3,4Y,5,6,7
0,30
0,1,2,3,4Y,5,6,7,8,10
0
0,30,39
0,30,69
0,30
0
0,30
0,30
0
0
0
0
0
0
0
0
0
0
0
0,UV2,UV4Y,UV6,UV6A,UV7A,
UV8,UV16B
0,UV2,UV2A,UV4Y,UV4A,UV5A,
UV5B,UV6,UV6A,UV6B,UV7A,
UV8,UV11,UV16B,UV18