OFF GRID SOLAR INVERTER Now MPPT model in 12v (1212MS)! SOLAR up to 80A* LCD DISPLAY HIGH FREQUENCY PURE SINE WAVE AC CHARGER USB PORT STACKABLE* PB ACID/LIFEPO4 * Only on 48V models MONITORING SOFTWARE — WATCHPOWER KEY FEATURES ● Built-in MPPT solar charger up to 80A*! ● Inverter+ AC Charger + Solar Charger 3-in-1 design ● Now available in 12Vdc model — 1212MS ● Pure sine wave output ● 110/120V can be special ordered (1624MSX only) ● 2X surge capacity up to 5 seconds ● Max AC charging up to 60A (48v models only) ● USB communication ● Max total system charging: 60A + 80A = 140A* ! ● LCD monitor display system info + LED indicators ● High frequency, light-weight design ● FREE monitoring software included ● Programmable menu ● Built-in generator starter dry contact** ● Adjustable Bulk/Float Voltage ● Overload/Overtemp/short circuit protections ● Supports various lead acid batteries ● Cold start capability (requires DC) Only 48V models are PARALLEL–READY. Optional Parallel Kit required for all units in parallel and sold separately. *Applicable only to new 3248MS and 4048MS 48v models ** Inverter-type generators are recommended for better compatibility. Conventional type may be rejected. email@example.com │ www.mppsolar.com Specifications PIP-MS/MSX Series 1212 824 1624 2424 2424MSX 3248 4048 1624MSX 1.2KW 800W 1.6KW 2.4KW 2.4KW 3.2KW 4.0KW 1.6KW ELECTRICAL SPECIFICATIONS Continuous Output Surge Rating 5 seconds max, 2X 5 seconds max 2X 0.8 0.8 90~280VAC (Appliance mode), 170~280VAC (UPS mode) 65~140VAC, 95~140VAC Input/Output Frequency 50Hz / 60Hz 50Hz / 60Hz Output Voltage 230VAC±5% 110/120VAC±5% Output Waveform Pure Sine Wave Pure Sine Wave Output Regulation < 3% RMS for battery voltage range < 3% RMS Input Power Factor Input Voltage Range 93% Peak Efficiency 93% Nominal DC Voltage 12V 24V 48V 24V Max DC Voltage 16V 31V 60V 30V 91% Transfer Time (2 Modes) 93% <10ms (UPS mode), <20ms (Appliance mode)** <10ms, <20ms 3-stage 3-stage Charging Mode Boost Voltage (Flooded, MF) Float Voltage 14.6V/14.1V 29.2V/28.2V 58.4V/56.4V 29.2V/28.2V 27.0V 54.0V 27.0V 60A 10-20A 13.5V Max AC Charging Current 60A 10-20A 20-30A No Load Power Consumption <20W <25W <50W <25W Power Saving Consumption <10W <10W <15W <10W Solar Charger a Max PV Input / Output 500W 600W 1500W 4000W 1500W Max Charging Current 40A 25A 60A 80A 60A 100V, 18~80V 75V, 30~66V 145V, 30~115V 145V, 60~115V 145V, 30~115V Max PV Input Voc, MPPT Range Algorithm MPPT MPPT ENVIRONMENTAL / MECHANICAL SPECIFICATIONS a Certification Operating/Storage Temp. Operating Humidity Dimension Net Weight CE CE 0°C ~ 55°C / -15°C~ 60°C 0°C ~ 55°C / -15°C~ 60°C 5~90%RH Non-Condensing 5~90%RH Non-Condensing 355*272*100mm 7.0Kg 7.0Kg 7.1Kg 479*295*140mm 7.5Kg 11.8Kg 468*295*140mm 11.5Kg 11.5Kg ** Transfer time may be longer (30ms) when used in parallel configuration and this may cause interruption in certain load. *Product specifications are subject to change without prior notice. MPP Solar is a registered trademark of MPP Solar Inc. 479*295*140mm 11.8Kg Optional Accessories This accessory is applicable only to select 48VDC models of HS and MS series inverters. It is a required component to be installed in every unit of a parallel system. A parallel kit includes: ● 1 X PARALLEL BOARD ● 1 X PARALLEL COMM CABLE ● 1 X CURRENT SHARING CABLE *IMPORTANT: please do not wire 12v or 24v HS/MS inverters in parallel, as this will result instant damage of all units! This device is an extension of the HS/MS inverter’s LCD module and allows user to implement control on settings and monitoring from a distance away. This remote module can coexist with the built-in LCD device and is compatible with most 12v/24v/48v models in the HS/MS inverter series*. Maximum operating distance: 15m via RJ45 network cable *This accessory is not fully compatible with 1212HS and 1212MS. Some parameters may not show **For more details on pricing, availability and installation guide, please contact us directly. **Product specifications are subject to change without prior notice. MPP Solar is a registered trademark of MPP Solar Inc.