Cable Ties/Wiring Accessories Catalog—WW

Cable Ties/Wiring Accessories Catalog—WW-CTCB03
(replaces SA-101N275C-WC)
Table of Contents
Cable Ties and Installation Tooling
Available Styles
PAN-TY ® Locking Cable Ties, Locking Lashing Ties, Releasable Ties, Releasable Lashing Ties,
Clamp Ties, Marker and Flag Ties, Winged Push Mount Ties, Push Mount Ties,
Weather Resistant Ties, Polypropylene Ties, Flame Retardant Ties, Nylon 12 Ties, HALAR* Ties,
TEFZEL ** Ties, Fluorescent Ties . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 6-26
DOM E-TOP ® Barb Ty Cable Ties, Clamp Ties, Marker Ties, DURA-TY ™ WR Cable Ties,
Heat Stabilized Ties, Winged Push Mount Ties . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 27-35
Parallel Entry (CONTOUR-TY ® Cable Ties, BELT -TY ™ IN-LINE Cable Ties, IN-LINE Cable Ties) . . . . . . . 36-39
Hook & Loop Cable Ties (TAK -TY ® Hook & Loop Cable Ties, Hook & Loop Strips/Rolls) . . . . . . . . . . . . 40-42
S TA -STRAP ® Clamp Ties, Cable Ties, Chassis/Panel Mount Ties . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 43-45
Specialty Ties (Stud Mounted Heat Stabilized, Releaseable Stud Mounted “Ladder” Cable Ties,
Multiple Loop, Double Hose Clamp, Polyethylene Marker Strap) . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 46-50
P AN -P OUCH ™ Telephone Cable Identification Kit . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 53
Cable Tie Kits . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .54
Cable Tie Installation Tools (manual/pneumatic/automatic) . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 55-61
Available Materials
Nylon 6.6 Cable Ties . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 6-13, 28, 30-33, 36-38, 43, 47
Heat Stabilized Nylon 6.6 Cable Ties . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 12, 30, 44, 46
Weather Resistant Nylon 6.6 Cable Ties. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 14-18, 29, 31, 36, 38, 47, 48
Polypropylene Cable Ties . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 18-19
Flame Retardant Nylon 6.6 Cable Ties . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 20
Weather Resistant Nylon 12 Cable Ties . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 21
HALAR* and TEFZEL** Cable Ties . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .22
Fluorescent Ties . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 23
Weather Resistant Acetal Cable Ties . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 33
Hook & Loop Cable Ties . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 40-42
Polyethylene Marker Straps . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 49
Additional Information
Lashing Ties . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 7, 8, 15, 16
Military Cross Reference Aerospace Standard Information . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .51
Custom Hot Stamping . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 52
Selecting the Proper Cable Tie Material for Your Application . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 62
Material Selection Guide . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 63
Weathering . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 64-65
Flammability . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 66-67
Radiation/Moisture/Temperature/Tensile Strength . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 68
Physical Characteristics of Cable Tie Materials . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .69
Chemical Resistance. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 70-74
Quality . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 75-76
Stainless Steel Tie Products
PAN-STEEL ® Stainless Steel Tie . . . . . . . . . . . . . . . . .
WAVE -TY ™ Superior Grip Standard Steel Tie. . . . . . . .
Stainless Steel Tie Installation Tools . . . . . . . . . . . . .
Metal Marker Plates/Tags/Marking Devices . . . . . . .
Stainless Steel Strapping . . . . . . . . . . . . . . . . . . . . . .
.........
.........
.........
.........
.........
........
........
........
........
........
.........
.........
.........
.........
.........
.........
.........
.........
.........
.........
. . . . . . . 77
. . . . . . . 77
. . . . . . . 78
. . . . . . . 78
. . . . . . . 80
Wiring Accessories
Cable Tie Accessories . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 85-107
Wiring Accessories — used without cable ties . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 108-123
Harness Board Accessories . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 124-129
Communication Cable Management . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 130-133
Selection and Use of Adhesive Mounts . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 134-136
Abrasion Protection Products (Heat Shrink, Non-Shrink PVC Tubing,
Spiral Wrap, Grommet Edging and Braided Expandable Sleeving) . . . . . . . . . . . . . . . . . . . . . . . . . 139-181
*HALAR is a registered trademark of Solvay Solexis, Inc.
** TEFZEL is a registered trademark of E.I. DuPont de Nemours Co.
All reference dimensions in this catalog are shown in inches (and millimeters).
1
World Leader in Cable Ties and Wiring Accessories
PANDUIT ® is a leading global producer of cable ties and wiring accessories, offering the
most complete selection of sizes, styles and materials. We continually provide new cable
tie and wiring accessory designs to meet the changing application challenges encountered
by our customers while providing lowest installed costs.
PANDUIT ® also offers the largest selection of ergonomic cable tie installation tools —
from high speed automatic systems to hand operated tools. So, whatever the need,
PANDUIT ® has the tool to help lower your total installed cost.
Assured Quality
ISO 9001
To help assure optimum quality, PANDUIT ® products are designed
and manufactured to meet applicable international, UL, military and customer standards:
The International Standards Organization (ISO) establishes worldwide standards for products and
services in recognition of increasing globalization of markets. The ISO program sets up the requirements
for quality assurance systems of these worldwide standards. PANDUIT ® is registered to ISO 9001, the
most comprehensive model in the standard, meant for companies who design, manufacture, install and
service the products they sell. Registration has been awarded by Underwriters Laboratories (Certificate
No. A2269) after extensive audit of QA systems employed at PANDUIT ®.
QS-9000 is the shorthand name for “Quality System Requirements QS-9000.” It is the common
supplier quality standard for the automotive industry. QS-9000 is based on the 1994 edition of
ISO 9001, but it contains additional requirements that are particular to the automotive industry.
These additions are considered automotive “interpretations” by the ISO community of accreditation
bodies and registrars. Registration has been awarded by Underwriters Laboratories Inc.
(Certificate No. A2269) for PANDUIT ® cable ties.
QS-9000
ISO14001 is a voluntary standard for Environmental Management Systems established by the
International Organization for Standardization. The international standard provides a benchmark for
continual improvement in environmental performance. Business partners can be confident that the
PANDUIT ® manufacturing facilities around the globe are engaged in an on-going process to maximize
value while minimizing impact on global natural resources.
ISO14001
Underwriters Laboratories, Inc. (File E56854)
Most PANDUIT ® miniature, intermediate, standard, light-heavy and heavy cross-section ties are
Recognized (ZODZ(8)) or Listed in the US and Canada by Underwriters Laboratories (ZODZ(7)) in their
Directory under the category “Wire Positioning Devices.” Natural, pigmented and weather resistant
cable ties are recognized for indoor use at temperatures up to 85 °C (185°F). Weather resistant cable
ties are also UL Listed for outdoor applications. Heat stabilized ties are UL Recognized and Listed for
indoor use at temperatures up to 115°C (239°F).
Aerospace Standard AS23190
Aerospace Standard SAE spec AS23190 covers the actual test requirements on cable ties. PANDUIT ®
cable ties, when tested, either meet or exceed the requirements of this specification.
Nuclear Regulatory
Commission
The NRC developed rules and regulations concerning Quality Assurance Criteria for Nuclear Power
Plants or Title 10, Chapter 10, Part 50, Appendix B (10CFR50). PANDUIT ® Corp. Quality Assurance
program is designed to satisfy the 18 criteria set forth in NRC 10CFR50, Appendix B, Military
Specification AS23190.
Ford Motor Company
PANDUIT ® has received Q1 certification status from Ford Motor Company. Q1 certification enables all
PANDUIT ® cable tie manufacturing facilities to approve all initial samples and production shipments of
the parts destined for Ford operations throughout the world.
International Approvals Independent Testing Facilities
K
German (VG)
Military
2
Lloyd’s Register of
Shipping
RINA
Most commonly used parts appear in BOLD.
Germanischer
Lloyd
Nippon Kaiji
Kyokai
Det Norske
Veritas
Bureau Veritas
R
Korean Register
of Shipping
Everywhere you need us!
Styles of Cable Ties
Selection Guide
PAN-TY ® Cable Ties
DOME-TOP ® Barb Ty Cable Ties
This line offers the largest selection of styles,
materials, and sizes. The ties are available in
nylon 6.6, nylon 12, polypropylene, HALAR*
and TEFZEL** material. Available in sizes from
.60" (15mm) maximum bundle diameter up to
13" (330mm) maximum bundle diameter.
All are self-locking and many sizes are
available in both releasable and non-releasable
types. PAN -TY ® Cable Ties are quickly installed
by hand or with PANDUIT ® installation tools.
These cable ties provide consistent performance
and reliability for those users who prefer a cable tie
with a stainless steel locking barb. They are infinitely
adjustable through their entire bundle range. On
selected popular sizes, the additional length of
DOME -TOP ® Barb Ty Cable Ties provides an
average of 30% more bundle area than other metal
barb cable ties. Available in sizes from .90" (23mm)
maximum bundle diameter up to 9.0" (229mm)
maximum bundle diameter and may be installed by
hand or with PANDUIT ® installation tools.
DURA-TY ™ Cable Ties
Parallel Entry Cable Ties
DURA -TY ™ is a heavy-duty cable tie that is
ideal for all outdoor applications requiring
high strength and longer life. The acetal
strap and head provides excellent UV
light resistance and high tensile strength.
The smooth, rounded edges on the head
and body do not irritate the hands. The
ties are easy to install. Available in
standard lengths or dispenser rolls for
easy, cut to length convenience in custom
applications.
Parallel Entry Ties are comprised of the
CONTOUR -TY ®, BELT-TY ™ and IN-LINE Cable Tie
families. CONTOUR -TY ® Cable Tie’s fully enclosed
locking wedge insures consistent strength, lasting
performance and it is available in a new heavystandard cross section. BELT-TY ™ Cable Ties have
low profile heads which help avoid snags and
reduce overall bundle size. IN-LINE Cable Ties are
exceptional for applications that require conformity
to large bundles. Unique IN-LINE design forms
completely around the bundle, increasing the
contact area. Serrations on the side of the head
assure positive grip during threading of the tie and
increases installation speed.
*HALAR is a registered trademark of Solvay Solexis, Inc.
** TEFZEL is a registered trademark of E.I. DuPont de Nemours Co.
Most commonly used parts appear in BOLD.
3
Styles of Cable Ties
Selection Guide (cont.)
TAK-TY ® Hook & Loop Cable Ties
STA-S TRAP ® Cable Ties
PANDUIT ® TAK-TY ® Hook & Loop Cable Ties
are ideal for applications that require
frequent cabling moves, adds and changes.
They can be used to secure a wide variety
of various sizes of cable bundles. Wide color
choice allows for quick and easy color
coding of separate cable bundles.
STA-STRAP ® Cable Ties offer several unique
features. Harness modifications during
assembly are made easy as the two-piece
design affords releasability prior to final
tensioning and cut-off. The ties are extremely
flexible and lightweight. They also provide
the lowest thread force in the industry which
reduces operator fatigue. The unique design
allows this cable tie to secure a bundle
directly to a panel without the need for
additional fasteners or mounting devices and
reduces installation costs.
Specialty Ties
Stainless Steel Ties and Strapping
PANDUIT ® continually develops new
products to help solve the unique
application problems of our customers.
One of these products is the polyethylene
cable marker strap that is used for
identifying telephone and fiber optic cable,
which typifies the design/manufacturing
capability of PANDUIT ® to respond to
these special needs.
Underground, underwater, indoors,
outdoors — however hostile the
environment — PANDUIT ® Stainless Steel
Ties and Strapping fasten and identify
components and cables quickly and easily.
Stainless steel ties stand up to most
chemicals, to nuclear and ultraviolet
radiation, to seawater and direct burial in
any soil, and to temperature extremes from
-112°F to 1700°F (-80°C to 925°C).
4
Most commonly used parts appear in BOLD.
PAN -TY ® Cable Ties
PAN-TY ® Cable Tie Features/Benefits:
1. One Piece Construction
2. Smooth, Round Edges
3. Tensile Strength
• Consistent performance
and reliability
• Available in lengths from 2.8"
(71mm) up to 43.3"
(1100mm) to meet a variety
of application requirements
• No irritation to installer’s hands,
increases productivity
• Prevents damage to
wire insulation
• Exceeds Industry and
Aerospace Standards
SAE (AS23190) standards
• Available in seven loop tensile
strengths from 8 lbs. (36N) up
to 250 lbs. (1112N) to provide
an economical selection
4. Curved Tip
5. Finger Tip Grip
6. More Teeth Per Inch
• Orients tip toward head to
speed installation — lowers
installed cost
• Faster initial threading
• Easier to pick up from
flat surfaces
• Finger tip grip on selected
sizes assures positive grip
during threading of the tie
• Grip prevents tip from
slipping out of cable tie head
during threading
• Greater number of small
uniform teeth provides
tighter bundles
• Because they are flush with
surface they provide proper
wire bundle grip without wire
insulation damage
7. Low Threading Force
8. One Piece Locking Design
9. Material Availability
• Lowest threading force of
any one piece cable tie in
the industry
• Reduces operator fatigue
• Thin tapered tip facilitates
threading, easier
initial insertion
• Multiple locking tooth design
provides greater strength
and reliability
• Available in self locking or
releasable styles for use in
applications where changes
are anticipated
• Available in a variety of
materials to meet the needs
of special environments
• Properly selected ties can be
used indoors or outdoors
with assurance of long
lasting performance
Most commonly used parts appear in BOLD.
5
Nylon 6.6 Locking Cable Ties (PLT Series)
PAN-TY ® Nylon 6.6
Locking Cable Ties —
Curved Tip
These versatile fasteners can be used in countless applications
wherever you need to bundle wire, cable, or hose. They tie bundle
diameters up to 13" (330mm), they also can be joined together for
even larger diameters. They have a minimum loop tensile strength
from 8 lbs. (36N) to 250 lbs. (1112N). Colors are available for
specific color-coding applications (see pages 24-26).
B
E
A REF.
Except PLT.6SM-C
C
D
CURVED TIP
Cable Ties for Automatic
Tools See Page 61.
SUBMINIATURE AND MINIATURE CROSS SECTION
Part
Number
Length
Width
A
B
in. (mm) in. (mm)
Head
Height
D
in. (mm)
Head
Width
E
in. (mm)
Max.
Bundle
Dia.
in. (mm)
Min. Loop
Tensile
Strength
Lbs. (N)
Recommended
PANDUIT ®
Installation Tool
Part No.
Std.
Pkg.
Qty.
Std.
Ctn.
Qty.
Bulk
Pkg.
Qty.
Bulk
Ctn.
Qty.
.125
(3.2)
.60
(15)
8
(36)
GTS, PTS
100
1000
1000
50000
100
1000
1000
50000
100
1000
1000
50000
100
1000
1000
50000
2.00
(51)
100
1000
1000
25000
1.38
(35)
100
1000
1000
25000
2.00
(51)
100
1000
1000
25000
100
1000
1000
10000
3.00
(76)
100
1000
1000
10000
4.00
(102)
100
1000
1000
10000
1.00
(25)
100
1000
1000
25000
1.50
(38)
100
1000
1000
25000
1.88
(48)
100
1000
1000
10000
100
1000
1000
10000
100
1000
1000
10000
4.00
(102)
100
1000
1000
5000
PLT.6SM-C
2.8
(71)
.070
(1.8)
.030
(.8)
.095
(2.4)
PLT.7M-C
3.1
(79)
.090
(2.3)
.032
(.8)
.115
(2.9)
PLT1M-C
3.9
(99)
PLT1.5M-C
5.6
(142)
PLT2M-C
8.0
(203)
.098
(2.5)
Packaging*
Thickness
C
in. (mm)
.043
(1.1)
.154
(3.9)
.68
(17)
.180
(4.6)
.87
(22)
1.25
(32)
18
(80)
GTS, GS2B, PTS,
PPTS or STS2
INTERMEDIATE CROSS SECTION
PLT1.5I-C
5.6
(142)
PLT2I-C
8.0
(203)
PLT2.5I-C
9.7
(246)
PLT3I-C
11.4
(290)
PLT4I-C
14.5
(368)
.142
(3.6)
.045
(1.1)
.240
(6.1)
2.50
(64)
.180
(4.6)
.145
(3.7)
.052
(1.3)
.260
(6.6)
40
(178)
GTS, GS2B, PTS,
PPTS or STS2
STANDARD CROSS SECTION
6
PLT1S-C
4.8
(122)
PLT1.5S-C
6.2
(157)
PLT2S-C
7.4
(188)
PLT2.5S-C
9.8
(249)
.316
(8.0)
.190
(4.8)
.052
(1.3)
2.50
(64)
.220
(5.6)
50
(222)
GTS, GS2B, GTH,
GS4H, PTS,
PPTS, STS2
or STH2
PLT3S-C
11.5
(292)
PLT4S-C
14.5
(368)
PLT4.5S-C
15.5
(394)
4.50
(114)
100
1000
1000
5000
PLT5S-C
17.5
(445)
5.00
(127)
100
500
1000
5000
Most commonly used parts appear in BOLD.
3.00
(76)
.337
(8.6)
*Order the number of pieces required in multiples of package quantities.
For colors and other materials, see pages 24-26.
All part numbers shown in standard package quantities unless denoted by ‡.
Nylon 6.6 Locking Cable Ties (PLT Series)
Light-Heavy and
Heavy Cross Section
B
E
A REF.
C
D
Part
Number
Width
Length
A
B
in. (mm) in. (mm)
Thickness
C
in. (mm)
Head
Height
D
in. (mm)
STRAIGHT TIP
Head
Width
E
in. (mm)
Max.
Bundle
Dia.
in. (mm)
Min. Loop
Tensile
Strength
Lbs. (N)
Except PLT5H, 6H,
8H and 13H
Recommended
PANDUIT ®
Installation Tool
Part No.
Packaging*
Std.
Pkg.
Qty.
Std.
Ctn.
Qty.
Bulk
Pkg.
Qty.
Bulk
Ctn.
Qty.
50
500
100
2000
50
500
100
2000
50
500
100
2000
50
500
100
1000
LIGHT-HEAVY CROSS SECTION
PLT6LH-L
21.9
(556)
6.00
(152)
PLT7LH-L
24.7
(627)
7.00
(178)
PLT8LH-L
27.6
(701)
PLT9LH-L
30.5
(775)
9.00
(229)
PLT10LH-L
34.3
(871)
10.31
(262)
50
1000
100
1000
2.00
(51)
50
500
250
2500
50
500
250
2500
50
500
250
2500
50
500
250
2500
50
500
100
2500
50
500
100
2000
50
500
100
1000
25
500
100
500
.300
(7.6)
.075
(1.9)
.325
(8.3)
.480
(12.2)
8.00
(203)
GTH, GS4H,
GS4EH
PPTEH, ST2EH
or STH2
120
(534)
HEAVY CROSS SECTION
PLT2H-L
8.1
(206)
PLT2.5H-L
9.8
(251)
.300
(7.6)
.075
(1.9)
.290
(7.4)
.480
(12.2)
2.50
(64)
PLT3H-L
11.4
(290)
PLT4H-L
14.5
(368)
4.00
(102)
PLT5H-L
17.7
(450)
5.00
(127)
PLT6H-L
20.9
(530)
PLT8H-L
30.6
(779)
PLT13H-Q
43.3
(1100)
.350
(8.9)
.078
(2.0)
.340
(8.6)
.560
(14.2)
120
(534)
3.00
(76)
GTH, GS4H,
GS4EH
PPTEH, ST2EH
or STH2
6.00
(152)
175
(778)
9.00
(229)
13.00
(330)
Lashing Ties typically are used on heavy duty jobs such as
securing conduit or large cable bundles to permanent structures,
indoors or out. Can be used with MCEH mounting clip
(see page 16).
PAN-TY ® Locking
Lashing Ties
E
B
PANDUIT
A REF.
C
D
Part Number
Length
Width
B
A
in. (mm) in. (mm)
Thickness
C
in. (mm)
Head
Height
D
in. (mm)
Head
Width
E
in. (mm)
Max.
Bundle
Dia.
in. (mm)
Min. Loop
Tensile
Strength
Lbs. (N)
Recommended
PANDUIT ®
Installation Tool
Part No.
Packaging*
Std.
Pkg.
Qty.
Std.
Ctn.
Qty.
Bulk
Pkg.
Qty.
Bulk
Ctn.
Qty.
2.00
(51)
—
—
100
1000
5.00
(127)
25
250
100
1000
25
250
100
1000
—
—
100
1000
10.00
(254)
—
—
100
500
12.00
(305)
—
—
100
500
EXTRA-HEAVY CROSS SECTION
PLT2EH-C‡
9.0
(229)
PLT5EH-Q„
20.1
(511)
PLT6EH-Q„
22.2
(564)
PLT8EH-C‡
28.3
(719)
PLT10EH-C‡
34.2
(869)
PLT12EH-C‡
40.1
(1019)
.075
(1.9)
.40
(10.2)
.500
(12.7)
.085
(2.2)
*Order the number of pieces required in multiples of package quantities.
For colors and other materials, see pages 24-26.
All part numbers shown in standard package quantities unless denoted by ‡.
„ Available without buckle for applications that do not require mounting.
.80
(20.3)
6.00
(152)
8.00
(203)
250
(1112)
GS4EH, PPTEH
or ST2EH
Most commonly used parts appear in BOLD.
7
Nylon 6.6 Releasable Cable Ties (PRT Series)
PAN-TY ® Releasable
Nylon 6.6 Cable Ties
The extended tab end of releasable cable ties permits easy release and
re-use even after the tie has been pulled up snug by hand. Releasable
ties are particularly useful in applications where changes are anticipated
during development, production or servicing in the field.
E
B
A REF.
STRAIGHT TIP
CURVED TIP
C
D
Head design for Standard Cross Section Ties
To release, grasp the head of the cable tie,
deflect release tab and pull the cable tie
away from the bundle.
Head design for Heavy Cross Section Ties
Except Heavy Ties
Part Number
Length
Width
A
B
in. (mm) in. (mm)
Thickness
C
in. (mm)
Head
Height
D
in. (mm)
Head
Width
E
in. (mm)
Max.
Bundle
Dia.
in. (mm)
Min. Loop
Tensile
Strength
Lbs. (N)
Recommended
PANDUIT ®
Installation Tool
Part No.
Packaging*
Std.
Pkg.
Qty.
Std.
Ctn.
Qty.
Bulk
Pkg.
Qty.
Bulk
Ctn.
Qty.
1.00
(25)
100
1000
1000
10000
1.50
(38)
100
1000
1000
10000
100
1000
1000
10000
3.00
(76)
100
1000
1000
10000
4.00
(102)
100
1000
1000
5000
2.00
(51)
50
500
250
2500
50
500
250
2500
50
500
250
2500
Std.
Pkg.
Qty.
Std.
Ctn.
Qty.
Bulk
Pkg.
Qty.
Bulk
Ctn.
Qty.
2.00
(51)
—
—
100
1000
5.00
(127)
25
250
100
1000
25
250
100
1000
—
—
100
1000
10.00
(254)
—
—
100
500
12.00
(305)
—
—
100
500
STANDARD CROSS SECTION
PRT1S-C
4.8
(122)
PRT1.5S-C
6.3
(160)
PRT2S-C
7.4
(188)
PRT3S-C
11.5
(292)
PRT4S-C
.316
(8.0)
.190
(4.8)
.052
(1.3)
.219
(5.6)
1.88
(48)
.337
(8.6)
14.5
(368)
50
(222)
Hand Installed
Only
HEAVY CROSS SECTION
PRT2H-L
8.4
(213)
PRT3H-L
11.4
(290)
PRT4H-L
14.5
(368)
.300
(7.6)
.075
(1.9)
.300
(7.6)
3.00
(76)
.480
(12.2)
80
(356)
Hand Installed
Only
4.00
(102)
PAN-TY ® Releasable Lashing Ties — Nylon 6.6
E
B
PANDUIT
A REF.
C
D
Part Number
Length
Width
A
B
in. (mm) in. (mm)
Thickness
C
in. (mm)
Head
Height
D
in. (mm)
Head
Width
E
in. (mm)
Max.
Bundle
Dia.
in. (mm)
Min. Loop
Tensile
Strength
Lbs. (N)
Recommended
PANDUIT ®
Installation Tool
Part No.
Packaging*
EXTRA-HEAVY CROSS SECTION
PRT2EH-C‡
9.0
(229)
PRT5EH-Q
20.1
(510)
PRT6EH-Q
22.2
(564)
PRT8EH-C‡
28.3
(719)
PRT10EH-C‡
34.2
(869)
PRT12EH-C‡
40.1
(1019)
8
.075
(1.9)
.500
(12.7)
.40
(10.2)
.085
(2.2)
Most commonly used parts appear in BOLD.
.80
(20.3)
6.00
(152)
8.00
(203)
250
(1112)
Hand Installed
Only
*Order the number of pieces required in multiples of package quantities.
For colors and other materials, see pages 24-26.
All part numbers shown in standard package quantities unless denoted by ‡.
Nylon 6.6 Locking Clamp Ties (PLC Series)
PAN-TY ® Nylon 6.6
Clamp Ties
Clamp ties are used to attach a bundle to another surface
such as a control panel, wall or ceiling using another fastener.
The design allows for bundling before or after screwing clamp
in place.
F
B
E
A REF.
C
D
Part Number
Length Width Thickness
B
A
C
in. (mm) in. (mm) in. (mm)
Boss
Height
D
in. (mm)
Hole
Boss
Max.
Width
Screw
Dia.
Bundle
E
F
Size
Dia.
in. (mm) in. (mm) (Metric) in. (mm)
Min. Loop Recommended
Tensile
PANDUIT ®
Strength Installation Tool
Part No.
Lbs. (N)
Packaging*
Std.
Pkg.
Qty.
Std.
Ctn.
Qty.
Bulk
Pkg.
Qty.
Bulk
Ctn.
Qty.
MINIATURE CROSS SECTION
PLC1M-S4-C
4.3
(110)
.100
(2.5)
.045
(1.2)
.153
(3.9)
.239
(6.1)
.118
(3.0)
#4
(M2.5)
.75
(20)
18
(80)
GTS, GS2B,
PTS, PPTS
or STS2
100
1000
1000 50000
.045
(1.2)
.166
(4.2)
.335
(8.5)
.172
(4.4)
#8
(M4)
1.25
(32)
40
(178)
GTS, GS2B,
PTS, PPTS
or STS2
100
1000
1000 25000
#6
(M3)
1000
1000 10000
.160
(4.1)
.145
(3.7)
100
.047
(1.2)
100
1000
1000 10000
100
1000
1000
5000
100
1000
1000
5000
50
500
250
2500
50
500
250
2500
INTERMEDIATE CROSS SECTION
PLC1.5I-S8-C
6.1
(156)
.135
(3.4)
STANDARD CROSS SECTION
PLC2S-S6-C
PLC2S-S10-C
PLC3S-S10-C
PLC4S-S10-C
7.9
(201)
7.9
(201)
12.0
(305)
.190
(4.8)
15.0
(381)
.373
(9.5)
.052
(1.3)
.220
(5.6)
.075
(1.9)
.265
(6.7)
#10
(M5)
.206
(5.2)
1.84
(47)
#10
(M5)
3.00
(76)
#10
(M5)
4.00
(102)
50
(222)
GTS, GS2B, GTH,
GS4H, PTS,
PPTS, STS2
or STH2
HEAVY CROSS SECTION
PLC2H-S25-L
PLC4H-S25-L
9.0
(228)
15.1
(384)
.300
(7.6)
*Order the number of pieces required in multiples of package quantities.
For colors and other materials, see pages 24-26.
All part numbers shown in standard package quantities unless denoted by ‡.
.500
(12.7)
.260
(6.6)
1/4
(M6)
2.00
(51)
4.00
(102)
120
(534)
GTH, GS4H,
GS4EH,PPTEH
STH2 or ST2EH
Most commonly used parts appear in BOLD.
9
Nylon 6.6 Marker and Flag Ties (PLF /PLM Series)
PAN-TY ® Nylon 6.6
Marker and Flag Ties
Marker and Flag Ties fasten and identify bundles at the same time.
They can be marked with PANDUIT ® Marker Pens or you can use
PANDUIT ® Custom Hot Stamping Service.
B
E
A REF.
C
D
PLM1M
PLM1M
PLM2M
Part Number
Length Width
Thickness
A
B
C
in. (mm) in. (mm) in. (mm)
Head
Height
D
in. (mm)
PLF1M
Head
Width
E
in. (mm)
Max.
Bundle
Dia.
in. (mm)
Write-on
Area
in. (mm)
PLF1MB
PLF1MA
Min. Loop Recommended
Std.
Tensile
PANDUIT ®
Installation
Pkg.
Strength
Tool Part No. Qty.*
Lbs. (N)
Packaging*
Std.
Ctn.
Qty.
Bulk
Pkg.
Qty.
100
1000
1000 25000
100
1000
1000 25000
100
1000
1000 25000
100
1000
1000 10000
100
1000
1000 10000
Bulk
Ctn.
Qty.
MINIATURE CROSS SECTION
PLF1M-C
PLF1MA-C
PLF1MB-C
PLM1M-C
PLM2M-C
4.3
(109)
.31 X .75
(7.9 X 19.1)
5.1
(130)
4.0
(101)
.76 X 1.04
(19.1 X 26.4)
.045
(1.1)
.098
(2.5)
3.9
(99)
.154
(3.9)
.180
(4.6)
.31 X .92
(7.9 X 23.4)
.75
(19)
.26 X .95
(6.6 X 24.1)
.035
(.9)
8.0
(203)
.87
(22)
18
(80)
GTS, GS2B,
PTS, PPTS
or STS2
2.00
(51)
PLM2S
PLM4S
PL3M2S
PL2M2S
Packaging*
Length Width
Thickness
A
B
C
Part Number in. (mm) in. (mm) in. (mm)
Head
Height
D
in. (mm)
Head
Width
E
in. (mm)
Write-on
Area
in. (mm)
Max.
Bundle
Dia.
in. (mm)
.44 x .87
(11.1 x 22.1)
1.75
(45)
.44 x 2.00
(11.1 x 50.8)
4.00
(102)
.87 x 1.07
(22.1 x 27.2)
1.75
(45)
.87 x 1.79
(22.1 x 45.5)
1.75
(45)
Min. Loop Recommended
Std.
Tensile
PANDUIT ®
Installation
Pkg.
Strength
Tool Part No. Qty.*
Lbs. (N)
Std.
Ctn.
Qty.
Bulk
Pkg.
Qty.
Bulk
Ctn.
Qty.
100
1000
500
10000
100
1000
500
5000
50
500
500
2500
50
500
500
2500
STANDARD CROSS SECTION
PLM2S-C
7.4
(188)
PLM4S-C
14.6
(371)
PL2M2S-L
7.4
(188)
PL3M2S-L
7.4
(188)
.185
(4.7)
.052
(1.3)
.220
(5.6)
.320
(8.1)
Marker Ties are also available in weather resistant black nylon for outdoor use. May be marked with PANDUIT
®
50
(222)
GTS, GS2B,
GTH, GS4H,
PTS, PPTS,
STS2
or STH2
PX-10 White Marking Pen found on page 105.
Custom Hot Stamping Available; See page 52.
10
Most commonly used parts appear in BOLD.
*Order the number of pieces required in multiples of package quantities.
For colors and other materials, see pages 24-26.
All part numbers shown in standard package quantities unless denoted by ‡.
Nylon 6.6 Winged Push Mount Ties (PLWP/PRWP Series)
Push mount ties are used to attach a cable bundle to a surface such as a
flat panel. The anchor is easily pressed into a pre-drilled hole and locks in
place. The wings provide constant tension when installed, creating a
stable, secure fixture and rattle-free installation.
PAN-TY ® Nylon 6.6
Winged Push
Mount Ties
B
PLWP
A REF.
D
C
B
PRWP
A REF.
D
C
Winged Nylon 6.6 Push Mount Ties — Locking Style (PLWP)
Part Number
Head
Length Width Thickness Height
A
B
C
D
in. (mm) in. (mm) in. (mm) in. (mm)
Nominal
Max.
Max.
Hole
Panel
Bundle
Thickness
Dia.
Dia.
in. (mm) in. (mm) in. (mm)
Min. Loop Recommended
Std.
Tensile
PANDUIT ®
Installation
Pkg.
Strength
Tool Part No.
Qty.
Lbs. (N)
Packaging*
Std.
Ctn.
Qty.
Bulk
Pkg.
Qty.
Bulk
Ctn.
Qty.
MINIATURE CROSS SECTION
PLWP1M-C
4.3
(109)
.098
(2.5)
.044
(1.1)
.220
(5.6)
.187
(4.7)
.093
(2.4)
.87
(22)
18
(80)
GTS, GS2B,
PTS, PPTS
or STS2
100
1000
500
5000
.280
(7.1)
.187
(4.7)
.093
(2.4)
1.25
(32)
40
(178)
GTS, GS2B,
PTS, PPTS
or STS2
100
1000
500
5000
.252
(6.4)
.105
(2.7)
.093
(2.4)
.157
(4.0)
.105
(2.7)
.093
(2.4)
.105
(2.7)
.093
(2.4)
.157
(4.0)
100
1000
500
5000
—
—
500
5000
—
—
500
5000
—
—
500
5000
—
—
500
5000
100
1000
500
5000
—
—
500
5000
—
—
500
5000
—
—
250
2500
—
—
250
2500
100
1000
500
5000
100
1000
500
5000
—
—
500
5000
—
—
500
5000
—
—
500
5000
—
—
250
2500
INTERMEDIATE CROSS SECTION
PLWP1.5I-C
6.0
(152)
.135
(3.4)
.045
(1.2)
STANDARD CROSS SECTION
PLWP1S-C
PLWP1SA-D‡
PLWP1SB-D‡
PLWP1.5S-D‡
PLWP1.5SA-D‡
PLWP2S-C
PLWP2SA-D‡
PLWP2SB-D‡
5.2
(132)
5.1
(130)
5.2
(132)
6.8
(173)
6.7
(170)
7.8
(198)
7.7
(196)
7.8
(198)
.187
(4.7)
.190
(4.8)
.052
(1.3)
.370
(9.4)
.252
(6.4)
.187
(4.7)
.252
(6.4)
.187
(4.7)
1.00
(25)
1.50
(38)
50
(222)
GTS, GS2B,
GTH, GS4H,
PTS, PPTS,
STS2 or
STH2
1.75
(45)
1.75
(45)
HEAVY CROSS SECTION
PLWP2H-TL‡
PLWP3H-TL‡
8.9
(226)
12.0
(305)
.300
(7.6)
.075
(1.9)
.370
(9.4)
.266
(6.8)
.105
(2.7)
2.00
(51)
3.00
(76)
120
(534)
GTH, GS4H,
STH2 or
PPTEH
Winged Nylon 6.6 Push Mount Ties — Releasable Style (PRWP)
STANDARD CROSS SECTION
PRWP1S-C
PRWP1SA-C
PRWP1SB-D‡
PRWP1.5S-D‡
PRWP2S-D‡
5.2
(132)
5.1
(130)
5.2
(132)
6.8
(173)
7.8
(198)
.266
(6.8)
.190
(4.8)
.052
(1.3)
.370
(9.4)
.105
(2.7)
.093
(2.4)
.157
(4.0)
1.00
(25)
.252
(6.4)
.105
(2.7)
1.50
(38)
1.75
(45)
.266
(6.8)
.105
(2.7)
2.00
(51)
.187
(4.7)
50
(222)
Hand Installed
Only
HEAVY CROSS SECTION
PRWP2H-TL ‡
8.9
(226)
.300
(7.6)
.075
(1.9)
.370
(9.4)
*Order the number of pieces required in multiples of package quantities.
For colors and other materials, see pages 24-26.
All part numbers shown in standard package quantities unless denoted by ‡.
120
(534)
Hand Installed
Only
Most commonly used parts appear in BOLD.
11
Heat Stabilized Nylon 6.6 Push Mount Ties (PLWP/PRLWP Series)
Center mounted winged push mount cable ties center the
bundle on all bundle diameters.
PAN -TY ® Center Mounted
Heat Stabilized Nylon 6.6
Winged Push Mount Ties
B
A REF.
C
D
PLWP30, 40, 50SC winged push mount
cable ties are for normal wire bundles.
PLWP40SD winged push mount cable ties
with convoluted tubing bump that prevents
lateral and axial movement on
convoluted tubing.
PLWP50SE winged push mount cable ties
with convoluted tubing bump that prevents
lateral movement on convoluted tubing.
BUNDLE DIAMETERS
from .12" to 1.97"
(3mm to 50mm)
Packaging*
Part Number
Head Nominal
Max.
Max.
Length Width Thickness Height
Hole
Panel
Bundle
A
B
C
D
Dia. Thickness
Dia.
in. (mm) in. (mm) in. (mm) in. (mm) in. (mm) in. (mm) in. (mm)
Min. Loop
Tensile
Strength
Lbs. (N)
Recommended
PANDUIT ®
Installation Tool
Part No.
Std.
Pkg.
Qty.
Std.
Ctn.
Qty.
Bulk
Pkg.
Qty.
Bulk
Ctn.
Qty.
STANDARD CROSS SECTION
PLWP30SC-D30‡
5.8
(147)
1.18
(30)
—
—
500
5000
PLWP40SC-D30‡
7.0
(178)
1.58
(40)
—
—
500
5000
PLWP50SC-D30‡
8.2
(208)
—
—
500
5000
PLWP40SD-D30‡
7.0
(178)
1.58
(40)
—
—
500
5000
PLWP50SE-D30‡
8.2
(208)
1.97
(50)
—
—
500
5000
.190
(4.8)
.050
(1.3)
.220
(5.6)
.266
(6.8)
.118
(3.0)
1.97
(50)
50
(222)
GTS, GS2B, GTH,
GS4H, PTS, PPTS,
STS2 or STH2
Ladder Style Heat Stabilized
Nylon 6.6 Winged Push Mount Ties
B
Unique releasable ladder design eliminates
the need for multiple clamp sizes.
Part Number
A
C
D
Head
Nominal
Max.
Max.
Length Width Thickness Height
Hole
Panel
Bundle
A
B
C
D
Dia.
Thickness
Dia.
in. (mm) in. (mm) in. (mm) in. (mm) in. (mm) in. (mm) in. (mm)
Min. Loop
Tensile
Strength
Lbs. (N)
Recommended
PANDUIT ®
Installation Tool
Part No.
35
(156)
Hand Installed Only
Packaging*
Std.
Pkg.
Qty.
Std.
Ctn.
Qty.
Bulk
Pkg.
Qty.
Bulk
Ctn.
Qty.
—
—
500
5000
—
—
500
5000
STANDARD CROSS SECTION
PRLWP30S-D30‡
PRLWP50S-D30‡
12
4.7
(119)
7.1
(180)
.380
(9.7)
.050
(1.3)
Most commonly used parts appear in BOLD.
.470
(12)
.256
(6.5)
.118
(3.0)
1.43
(36)
2.18
(55)
*Order the number of pieces required in multiples of package quantities.
For colors and other materials, see pages 24-26.
All part numbers shown in standard package quantities unless denoted by ‡.
Nylon 6.6 Push Mount Ties (PLUP/PLP Series)
The anchor snaps into a hole in a light gauge metal or plastic panel.
No screws or other fasteners required. The umbrella shaped disc
stabilizes the anchor and insures a tight, rattle-free fit. In addition, the
umbrella disc provides a dust-tight and semi-liquid tight seal against the
panel surface. The material is heat stabilized, black Nylon 6.6.
PANDUIT ® Umbrella
Winged Push Mount
Cable Ties
B
A REF.
C
Packaging*
Nominal
A
B
C
Hole
Length
Width Thickness Diameter
in. (mm) in. (mm) in. (mm)
in. (mm)
Part Number
Max.
Panel
Thickness
in. (mm)
Max.
Bundle
Diameter
in. (mm)
Min. Loop
Tensile
Strength
Lbs. (N)
.050
(1.3)
1.57
(40)
49
(218)
Recommended
PANDUIT ®
Installation
Tool
Part No.
Std.
Pkg.
Qty.
Std.
Ctn.
Qty.
Bulk
Pkg.
Qty.
Bulk
Ctn.
Qty.
—
—
500
5000
—
—
500
5000
STANDARD CROSS SECTION
PLUP40S-D30‡
•PLUP40SE-D30‡
7.0
(177)
.190
(4.8)
.047
(1.2)
.266
(6.8)
GTS, GS2B,
GTH, GS4H,
PTH or PPTS
•For use with Corrugated Loom Tubing.
PAN -TY ® Nylon 6.6
Push Mount
Ties (Style PLP)
B
Head design for standard cross section ties
A REF.
Head design for
intermediate
cross section ties
D
C
Economical Push Mount Tie Style
Packaging*
Part Number
A
Length
in. (mm)
B
Width
in. (mm)
C
Thickness
in. (mm)
D
Head
Height
in. (mm)
Nominal
Hole
Diameter
in. (mm)
.236
(6.0)
.187
(4.7)
Max.
Maximum Min. Loop
Panel
Bundle
Tensile
Thickness Diameter Strength
in. (mm)
in. (mm)
Lbs. (N)
Recommended
PANDUIT ®
Installation
Tool
Part No.
Std.
Pkg.
Qty.
Std.
Ctn.
Qty.
Bulk
Pkg.
Qty.
Bulk
Ctn.
Qty.
—
—
1000
25000
100
1000
1000
10000
—
—
1000
10000
100
1000
1000
10000
INTERMEDIATE CROSS SECTION
PLP1.5I-M‡
6.1
(156)
.135
(3.4)
.045
(1.1)
.090
(2.4)
1.25
(31.8)
40
(178)
GTS, GS2B, PTS,
PPTS or STS2
50
(222)
GTS, GS2B,
GTH,
GS4H, PTS,
PPTS, STS2 or
STH2
STANDARD CROSS SECTION
PLP1S-C
5.3
(134)
PLP1.5S-M‡
6.7
(170)
PLP2S-C
7.9
(200)
1.00
(25)
.180
(4.6)
.50
(1.3)
.354
(9.0)
*Order the number of pieces required in multiples of package quantities.
For colors and other materials, see pages 24-26.
All part numbers shown in standard package quantities unless denoted by ‡.
.250
(6.4)
.130
(3.2)
1.50
(38)
1.75
(45)
Most commonly used parts appear in BOLD.
13
Weather Resistant Nylon 6.6 Cable Ties (PLT Series)
Weather resistant nylon has greater resistance to ultraviolet light
which damages natural nylon. Where adverse outdoor conditions
exist, see technical/application data section (pages 64-65) to select
proper cable tie material for specific applications.
PAN -TY ® Weather
Resistant Nylon
Cable Ties
B
E
A REF.
C
D
CURVED TIP
SUBMINIATURE AND MINIATURE CROSS SECTION
Part Number
PLT.6SM-C0
PLT1M-C0
PLT1.5M-C0
PLT2M-C0
Length
Width
A
B
in. (mm) in. (mm)
2.8
.070
(71)
(1.8)
3.9
(99)
5.6
(142)
8.0
(203)
Thickness
C
in. (mm)
.030
(.8)
.098
(2.5)
.043
(1.1)
Head
Height
D
in. (mm)
.095
(2.4)
.154
(3.9)
Head
Width
E
in. (mm)
.125
(3.2)
Max.
Bundle
Dia.
in. (mm)
.60
(15)
.180
(4.6)
.87
(22)
1.25
(32)
2.00
(51)
Min. Loop
Tensile
Strength
Lbs. (N)
8
(36)
Recommended
PANDUIT ®
Installation
Tool Part No.
GTS, PTS or
STS2
18
(80)
GTS, GS2B,
PTS, PPTS
or STS2
Packaging*
Std.
Pkg.
Qty.
100
Std.
Ctn.
Qty.
1000
Bulk
Pkg.
Qty.
1000
Bulk
Ctn.
Qty.
50000
100
1000
1000
50000
100
1000
1000
50000
100
1000
1000
25000
100
1000
1000
25000
100
1000
1000
25000
100
1000
1000
10000
100
1000
1000
10000
100
1000
1000
10000
100
1000
1000
10000
100
1000
1000
10000
100
1000
1000
10000
100
1000
1000
10000
100
1000
1000
10000
100
1000
1000
5000
100
1000
1000
5000
100
500
1000
5000
INTERMEDIATE CROSS SECTION
PLT1.5I-C0
PLT2I-C0
PLT2.5I-C0
PLT3I-C0
PLT4I-C0
5.6
(142)
8.0
(203)
9.7
(246)
11.4
(290)
14.5
(368)
.142
(3.6)
.045
(1.1)
.240
(6.1)
.180
(4.6)
.145
(3.7)
.052
(1.3)
.280
(6.6)
1.38
(35)
2.00
(51)
2.50
(64)
3.00
(76)
4.00
(102)
40
(178)
GTS, GS2B,
PTS, PPTS
or STS2
STANDARD CROSS SECTION
PLT1S-C0
PLT1.5S-C0
PLT2S-C0
PLT2.5S-C0
PLT3S-C0
PLT4S-C0
PLT4.5S-C0
PLT5S-C0
14
4.8
(122)
6.2
(157)
7.4
(188)
9.8
(249)
11.5
(292)
14.5
(368)
15.5
(394)
17.5
(445)
.316
(8.0)
.190
(4.8)
.052
(1.3)
Most commonly used parts appear in BOLD.
.220
(5.6)
.337
(8.6)
1.00
(25)
1.50
(38)
1.88
(48)
2.50
(64)
3.00
(76)
4.00
(102)
4.50
(114)
5.00
(127)
50
(222)
GTS, GS2B,
GTH, GS4H,
PTS, PPTS,
STS2 or STH2
*Order the number of pieces required in multiples of package quantities.
For colors and other materials, see pages 24-26.
All part numbers shown in standard package quantities unless denoted by ‡.
Weather Resistant Cable Ties (PLT Series)
PAN-TY ® Weather
Resistant Nylon
Cable Ties
B
E
A REF.
C
D
Part Number
Length
Width
A
B
in. (mm) in. (mm)
Thickness
C
in. (mm)
Head
Height
D
in. (mm)
STRAIGHT TIP
Head
Width
E
in. (mm)
Max.
Bundle
Dia.
in. (mm)
.480
(12.2)
6.00
(152)
7.00
(178)
8.00
(203)
9.00
(229)
Min. Loop
Tensile
Strength
Lbs. (N)
Recommended
PANDUIT ®
Installation
Tool Part No.
Packaging*
Std.
Pkg.
Qty.
Std.
Ctn.
Qty.
Bulk
Pkg.
Qty.
Bulk
Ctn.
Qty.
50
500
100
2000
50
500
100
2000
50
500
100
2000
50
500
100
2000
50
500
100
1000
50
500
250
2500
50
500
250
2500
50
500
250
2500
50
500
250
2500
50
500
250
2000
50
500
100
1000
25
500
100
500
Std.
Pkg.
Qty.
Std.
Ctn.
Qty.
Bulk
Pkg.
Qty.
Bulk
Ctn.
Qty.
25
250
100
1000
25
250
100
1000
25
250
100
1000
25
250
100
1000
25
250
100
500
25
250
100
500
LIGHT-HEAVY CROSS SECTION
PLT6LH-L0
PLT7LH-L0
PLT8LH-L0
PLT9LH-L0
21.9
(556)
24.7
(627)
27.6
(701)
30.5
(775)
.300
(7.6)
.075
(1.9)
.325
(8.3)
120
(534)
GTH, GS4H,
GS4EH
PPTEH or
STH2
HEAVY CROSS SECTION
PLT2H-LO
PLT2.5H-L0
PLT3H-L0
PLT4H-L0
PLT5H-L0
PLT6H-L0
PLT8H-L0
PLT13H-Q0
8.1
(206)
9.8
(251)
11.4
(290)
14.5
(368)
17.7
(450)
20.9
(530)
30.6
(779)
2.00
(51)
.300
(7.6)
.075
(1.9)
.350
(8.9)
.290
(7.4)
.078
(2.0)
.340
(8.6)
4.00
(102)
5.00
(127)
6.00
(152)
9.00
(229)
.560
(14.2)
43.3
(1100)
120
(534)
GTH, GS4H,
GS4EH
PPTEH or
STH2
175
(778)
13.00
(330)
PAN-TY ® Locking
Weather Resistant
Nylon Lashing Ties
E
Length
Width
B
A
in. (mm) in. (mm)
B
PANDUIT
A REF.
C
D
Part Number
2.50
(64)
3.00
(76)
.480
(12.2)
Thickness
C
in. (mm)
Head
Height
D
in. (mm)
Head
Width
E
in. (mm)
Max.
Bundle
Dia.
in. (mm)
Min. Loop
Tensile
Strength
Lbs. (N)
Recommended
PANDUIT ®
Installation
Tool Part No.
Packaging*
EXTRA-HEAVY CROSS SECTION
PLT2EH-Q0
PLT5EH-Q0
PLT6EH-Q0
PLT8EH-Q0
PLT10EH-Q0
PLT12EH-Q0
9.0
(229)
20.1
(511)
22.2
(564)
28.3
(719)
34.2
(869)
40.1
(1019)
.075
(1.9)
.500
(12.7)
.400
(10.2)
.085
(2.2)
*Order the number of pieces required in multiples of package quantities.
For colors and other materials, see pages 24-26 .
All part numbers shown in standard package quantities unless denoted by ‡
.800
(20.3)
2.00
(51)
5.00
(127)
6.00
(152)
8.00
(203)
10.00
(254)
12.00
(305)
250
(1112)
GS4EH
PPTEH or
STH2
Most commonly used parts appear in BOLD.
15
Weather Resistant Cable Ties (PRT Series)
The extended tab end of releasable cable ties permits easy release
and reuse even after tie has been pulled up snug by hand. Releasable
ties are particularly useful where changes are anticipated during
development, production or servicing in the field.
PAN-TY ® Releasable
Weather Resistant
Nylon Lashing Ties
E
B
PANDUIT
A REF.
C
D
Part Number
Length
A
in. (mm)
Width
B
in. (mm)
Thickness
C
in. (mm)
Head
Height
D
in. (mm)
Head
Width
E
in. (mm)
Max.
Bundle
Dia.
in. (mm)
Min. Loop
Tensile
Strength
Lbs. (N)
Recommended
PANDUIT ®
Installation
Tool Part No.
Packaging*
Std.
Pkg.
Qty.
Std.
Ctn.
Qty.
Bulk
Pkg.
Qty.
Bulk
Ctn.
Qty.
25
250
100
1000
25
250
100
1000
25
250
100
1000
25
250
100
1000
25
250
100
500
25
250
100
500
EXTRA-HEAVY CROSS SECTION
PRT2EH-Q0
9.0
(229)
PRT5EH-Q0
20.1
(510)
22.2
(564)
28.3
(719)
34.2
(869)
40.1
(1019)
PRT6EH-Q0
PRT8EH-Q0
PRT10EH-Q0
PRT12EH-Q0
.075
(1.9)
.500
(12.7)
.400
(10.2)
.800
(20.3)
.085
(2.2)
Lashing Tie
Mounting Clip
2.00
(51)
5.00
(127)
6.00
(152)
8.00
(203)
10.00
(254)
12.00
(305)
250
(1112)
Hand Installed
Only
Converts PANDUIT ® PAN -TY ® Lashing Ties into clamps. Easily snaps
in place for a secure clamp. Used with Lashing Ties
(see pages 7, 8, 15 and above).
B
A
C
Dimensions
in. (mm)
Part Number
MCEH-S25-C0
16
Height
A
in. (mm)
.13
(3.3)
Width
B
in. (mm)
.67
(17.0)
Most commonly used parts appear in BOLD.
Packaging*
Length
C
in. (mm)
1.38
(35)
Material
Weather
Resistant
Nylon 6.6
Color
Black
Where
Used
Outdoors or
Indoors
Mounting
Method
1/4" (M6)
screw
(except
flathead)
Std.
Pkg.
Qty.
—
Std.
Ctn.
Qty.
—
Bulk
Pkg.
Qty.
100
Bulk
Ctn.
Qty.
1000
*Order the number of pieces required in multiples of package quantities.
For colors and other materials, see pages 24-26.
All part numbers shown in standard package quantities unless denoted by ‡
Weather Resistant Cable Ties (PRT Series)
Releasable Cable Ties
(PRT Series)
The extended tab end of releasable cable ties permits easy release and
reuse even after tie has been pulled up snug by hand. Releasable ties
are particularly useful where changes are anticipated during
development, production or servicing in the field.
E
B
A REF.
STRAIGHT TIP
CURVED TIP
C
D
Head design for Standard Cross Section Ties
Head design for Heavy Cross Section Ties
To release, grasp the head of
the cable tie, deflect release
tab and pull the cable tie away
from the bundle.
Part Number
Cross
Section
Length
Width Thickness
B
A
C
in. (mm) in. (mm) in. (mm)
Head
Height
D
in. (mm)
Head
Width
E
in. (mm)
Max.
Bundle
Dia.
in. (mm)
.316
(8.0)
1.00
(25)
1.50
(38)
1.88
(48)
Min. Loop
Tensile
Strength
Lbs. (N)
Recommended
PANDUIT ®
Installation
Tool Part No.
Packaging*
Std.
Pkg.
Qty.
Std.
Ctn.
Qty.
Bulk
Pkg.
Qty.
Bulk
Ctn.
Qty.
100
1000
100
10000
100
1000
100
10000
100
1000
100
10000
STANDARD CROSS SECTION
PRT1S-C0
PRT1.5S-C0
PRT2S-C0
Std.
PRT3S-C0
4.8
(122)
6.3
(160)
7.4
(188)
11.5
(292)
.190
(4.8)
.052
(1.3)
.219
(5.6)
14.5
(368)
PRT4S-C0
50
(222)
Hand Installed
Only
3.00
(76)
4.00
(102)
100
1000
100
10000
.337
(8.6)
100
1000
100
5000
50
500
250
2500
.480
(12.2)
2.00
(51)
3.00
(76)
4.00
(102)
50
500
250
2500
50
500
250
2500
HEAVY CROSS SECTION
PRT2H-L0
PRT3H-L0
PRT4H-L0
Hvy.
8.4
(213)
11.4
(290)
14.5
(368)
.300
(7.6)
.075
(1.9)
*Order the number of pieces required in multiples of package quantities.
For colors and other materials, see pages 24-26 .
All part numbers shown in standard package quantities unless denoted by ‡
.300
(7.6)
80
(356)
Hand Installed
Only
Most commonly used parts appear in BOLD.
17
Weather Resistant Nylon 6.6 Clamp Ties (PLC Series)
Clamps are used to attach a bundle to another surface such as a control
panel, wall or ceiling using another fastener. The design allows for
bundling before or after screwing clamp in place.
PAN -TY ® Weather
Resistant Nylon
Clamp Ties
F
B
E
A REF.
C
D
Part Number
Length
A
in.
(mm)
Boss
Width Thickness Height
B
C
D
in.
in.
in.
(mm)
(mm)
(mm)
Boss
Width
E
in.
(mm)
Nominal
Hole
Dia.
F
in. (mm)
Screw
Size
Max.
Bundle
Dia.
in. (mm)
Min.
Loop
Recommended
Std.
Tensile
PANDUIT ®
Installation
Pkg.
Strength
Tool Part No.
Qty.
Lbs. (N)
Packaging*
Std.
Ctn.
Qty.
Bulk
Pkg.
Qty.
Bulk
Ctn.
Qty.
MINIATURE CROSS SECTION
PLC1M-S4-C0
4.3
(110)
.100
(2.5)
.045
(1.2)
.153
(3.9)
.239
(6.1)
.118
(3.0)
#4
(M2.5)
.75
(20)
18
(80)
GTS, GS2B,
PTS, PPTS
or STS2
100
1000 1000 50000
.045
(1.2)
.166
(4.2)
.335
(8.5)
.172
(4.4)
#8
(M4)
1.25
(32)
40
(178)
GTS, GS2B,
PTS, PPTS
or STS2
100
1000 1000 25000
#6
(M3)
1000 1000 10000
.160
(4.1)
.145
(3.7)
100
.047
(1.2)
100
1000 1000 10000
100
1000 1000
5000
100
1000 1000
5000
INTERMEDIATE CROSS SECTION
PLC1.5I-S8-C0
6.1
(156)
.135
(3.4)
STANDARD CROSS SECTION
PLC2S-S6-C0
PLC2S-S10-C0
PLC3S-S10-C0
PLC4S-S10-C0
7.9
(201)
.190
(4.8)
12.0
(305)
15.0
(381)
.390
(9.5)
.052
(1.3)
.220
(5.6)
.075
(1.9)
.265
(6.7)
.206
(5.2)
#10
(M5)
1.84
(47)
3.00
(76)
4.00
(102)
50
(222)
GTS, GS2B,
GTH, GS4H,
PTS, PPTS,
STS2 or STH2
HEAVY CROSS SECTION
PLC2H-S25-TL0‡
PLC4H-S25-L0
9.0
(228)
15.1
(384)
.300
(7.6)
.500
(12.7)
.260
(6.6)
.262
(6.7)
1/4
(M6)
2.00
(51)
4.00
(102)
120
(534)
GTH, GS4H,
GS4EH, PPTEH
or STH2
—
—
250
2500
50
500
250
2500
NATURAL POLYPROPYLENE CABLE TIES (Refer to drawing on page 19)
Part Number
Length
A
in.
(mm)
Max.
Min.
Width
Head
Head Bundle
Loop
Recommended
B
Thickness Height Width
Dia.
Tensile
PANDUIT ®
Installation
in.
C
D
E
in.
Strength
(mm)
in. (mm) in. (mm) in. (mm) (mm) Lbs. (N) Tool Part No.
Packaging*
Tool
Setting1
(except STS2/STH2)
Std.
Pkg.
Qty.
Std.
Ctn.
Qty.
Bulk
Pkg.
Qty.
Bulk
Ctn.
Qty.
MINIATURE CROSS SECTION
PLT1M-M109
3.9
(99)
.098
(2.5)
.043
(1.1)
.154
(3.9)
.180
(4.6)
.87
(22)
11
(49)
GTS, GS2B,
PTS, PPTS
or STS2
2
—
—
1000 50000
.045
(1.2)
.180
(4.6)
.240
(6.1)
1.38
(35)
18
(80)
GTS, GS2B,
PTS, PPTS
or STS2
3
—
—
1000 25000
.316
(8.0)
1.88
(48)
3.00
(76)
4.00
(102)
—
—
1000 10000
—
—
1000 10000
—
—
1000
5000
—
—
250
2500
—
—
250
2500
—
—
250
2500
INTERMEDIATE CROSS SECTION
PLT1.5I-M109
5.6
(142)
.142
(3.6)
STANDARD CROSS SECTION
PLT2S-M109
PLT3S-M109
PLT4S-M109
7.4
(188)
11.5
(292)
14.5
(368)
.190
(4.8)
.052
(1.3)
.220
(5.6)
.337
(8.6)
30
(133)
GTS, GS2B,
GTH, GS4H, 5 (GTS, GS2B, PTS, PPTS)
PTS, PPTS,
2 (GTH, GS4H)
STS2 or STH2
HEAVY CROSS SECTION
PLT2H-TL109
PLT3H-TL109
PLT4H-TL109
8.1
(206)
11.4
(290)
14.5
(368)
.300
(7.6)
.075
(1.9)
.290
(7.4)
.480
(12.2)
2.00
(51)
3.00
(76)
4.00
(102)
50
(222)
GTH, GS4H,
PPTEH or STH2
5
NOTE 1: For best results, use tool tensions at the low end of the adjustment range, i.e. Std. Cable Ties installed at tool setting 5 to arrive at optimum installation tension.
18
Most commonly used parts appear in BOLD.
*Order the number of pieces required in multiples of package quantities.
For colors and other materials, see pages 24-26.
All part numbers shown in standard package quantities unless denoted by ‡
Polypropylene Cable Ties (PLT / PRT Series)
PAN-TY ® Weather
Resistant
Polypropylene
Cable Ties
For chemical resistance in outdoor applications that are unsuitable for
nylon and that do not require high loop tensile strengths. Color is black.
B
E
A REF.
C
D
CURVED TIP
Part Number
Head
Height
D
in. (mm)
Head
Width
E
in. (mm)
Max.
Bundle
Dia.
in. (mm)
.043
(1.1)
.154
(3.9)
.180
(4.6)
.87
(22)
11
(49)
.045
(1.1)
.180
(4.6)
.240
(6.1)
1.38
(35)
18
(80)
.316
(8.0)
1.88
(48)
3.00
(76)
4.00
(102)
Length
Width Thickness
A
B
C
in. (mm) in. (mm) in. (mm)
Tool
Setting 1
(except
STS2/
STH2)
Std.
Pkg.
Qty.
Std.
Ctn.
Qty.
Bulk
Pkg.
Qty.
Bulk
Ctn.
Qty.
GTS, GS2B,
PTS, PPTS
or STS2
2
—
—
1000
50000
GTS, GS2B,
PTS, PPTS
or STS2
3
—
—
1000
25000
5 (GTS,
GS2B,
PTS,
PPTS)
2 (GTH,
GS4H)
—
—
1000
10000
—
—
1000
10000
—
—
1000
5000
—
—
250
2500
—
—
250
2500
—
—
250
2500
Min. Loop Recommended
Tensile
PANDUIT ®
Strength Installation Tool
Part No.
Lbs. (N)
Packaging*
MINIATURE CROSS SECTION
PLT1M-M100
3.9
(99)
.098
(2.5)
INTERMEDIATE CROSS SECTION
PLT1.5I-M100
5.6
(142)
.142
(3.6)
STANDARD CROSS SECTION
PLT2S-M100
PLT3S-M100
PLT4S-M100
7.4
(188)
11.5
(292)
14.5
(368)
.190
(4.8)
.052
(1.3)
.220
(5.6)
.337
(8.6)
GTS, GS2B,
GTH, GS4H,
PTS, PPTS,
STS2
or STH2
30
(133)
HEAVY CROSS SECTION
PLT2H-TL100
PLT3H-TL100
PLT4H-TL100
8.1
(206)
11.4
(290)
14.5
(368)
.300
(7.6)
.075
(1.9)
.290
(7.4)
.480
(12.2)
2.00
(51)
3.00
(76)
4.00
(102)
GTH, GS4H,
PPTEH
or STH2
50
(222)
5
NOTE 1: For best results, use tool tensions at the low end of the adjustment range, i.e. Std. Cable Ties installed at tool setting 5 to arrive at optimum installation tension.
PAN-TY ® Releasable
Polypropylene
Cable Ties
E
B
A REF.
STRAIGHT TIP
CURVED TIP
C
D
Head design for Standard Cross Section Ties
To release, grasp the head of the cable
tie, deflect release tab and pull the
cable tie away from the bundle.
Part Number
Length
A
in. (mm)
Width
B
in. (mm)
Thickness
C
in. (mm)
Head
Height
D
in. (mm)
Head
Width
E
in. (mm)
Head design for Heavy Cross Section Ties
Min. Loop
Max.
Bundle
Tensile
Dia.
Strength
in. (mm) Lbs. (N)
Recommended
PANDUIT ®
Installation
Tool Part. No.
Packaging*
Std.
Pkg.
Qty.
Std.
Ctn.
Qty.
Bulk
Pkg.
Qty.
Bulk
Ctn.
Qty.
100
1000
—
—
100
1000
—
—
EXTRA-HEAVY CROSS SECTION — WEATHER RESISTANT POLYPROPYLENE
PRT5EH-C100
PRT6EH-C100
20.1
(510)
22.2
(564)
.500
(12.7)
.075
(1.9)
.400
(10.2)
*Order the number of pieces required in multiples of package quantities.
All part numbers shown in standard package quantities unless denoted by ‡
.800
(20.3)
5.00
(127)
6.00
(152)
90
(400)
Hand Installed
Most commonly used parts appear in BOLD.
19
Flame Retardant Nylon 6.6 Cable Ties
PAN -TY ® Flame
Retardant Nylon 6.6
Cable Ties and
Marker Ties
• Flame Retardant Nylon 6.6 meets the requirements of UL94V-0
• Can be used with flame retardant cable tie mounts (see pages 86 and 89)
B
E
A REF.
C
D
CURVED TIP
PLM1M
Part Number
Length
Width Thickness
A
B
C
in. (mm) in. (mm) in. (mm)
Head
Height
D
in. (mm)
PLF1M
PLT
Head
Width
E
in. (mm)
Marker
Write-on
Area
in. (mm)
Max.
Bundle
Dia.
in. (mm)
.180
(4.6)
.31 x .75
(7.9 x 19.1)
.26 x .95
(6.6 x 24.1)
.87
(22)
.75
(20)
—
.87
(22)
2.00
(51)
—
1.38
(35)
2.00
(51)
40
(178)
GTS, GS2B,
PTS, PPTS
or STS2
—
1.88
(48)
4.00
(102)
50
(222)
GTS, GS2B,
GTH, GS4H,
PTS, PPTS,
STS2 or STH2
4.00
(102)
120
(534)
Min. Loop
Tensile
Strength
Lbs. (N)
Recommended
PANDUIT ®
Installation
Tool Part No.
Packaging*
Std.
Pkg.
Qty.
Std.
Ctn.
Qty.
—
—
1000 25000
—
—
1000 25000
—
—
1000 25000
—
—
1000 25000
—
—
1000 25000
—
—
1000 25000
—
—
1000 10000
—
—
1000
5000
—
—
250
2500
Bulk
Pkg.
Qty.
Bulk
Ctn.
Qty.
MINIATURE CROSS SECTION
PLF1M-M69‡
PLM1M-M69‡
PLT1M-M69‡
PLT2M-M69‡
4.3
(109)
3.9
(99)
4.0
(102)
8.0
(203)
.098
(2.5)
.045
(1.1)
.035
(.9)
.043
(1.1)
.154
(3.9)
.188
(4.8)
18
(80)
GTS, GS2B,
PTS. PPTS
or STS2
INTERMEDIATE CROSS SECTION
PLT1.5I-M69‡
PLT2I-M69‡
5.6
(142)
8.0
(203)
.142
(3.6)
.142
(3.6)
.044
(1.1)
.177
(4.5)
.239
(6.1)
.190
(4.8)
.052
(1.3)
.052
(1.3)
.220
(5.6)
.320
(8.1)
.337
(8.6)
.300
(7.6)
.075
(1.9)
.290
(7.4)
.480
(12.2)
STANDARD CROSS SECTION
PLT2S-M69‡
PLT4S-M69‡
7.4
(188)
14.5
(368)
HEAVY CROSS SECTION
PLT4H-TL69‡
20
14.6
(371)
Most commonly used parts appear in BOLD.
—
GTH, GS4H,
GS4EH,
PPTEH or
STH2
*Order the number of pieces required in multiples of package quantities.
All part numbers shown in standard package quantities unless denoted by ‡
Weather Resistant Nylon 12 Cable Ties
• For high moisture, corrosive environments and
low temperatures
• For indoor use or weather resistant applications
PAN-TY ® Weather Resistant
Nylon 12 Cable Ties
B
E
A REF.
C
D
CURVED TIP
Part Number
Length
A
in. (mm)
Thickness
C
in. (mm)
Head
Height
D
in. (mm)
Head
Width
E
in. (mm)
Max.
Bundle
Dia.
in. (mm)
Min. Loop
Tensile
Strength
Lbs. (N)
Recommended
PANDUIT ®
Installation Tool
Part No.
.045
(1.1)
.180
(4.6)
.240
(6.1)
1.38
(35)
25
(111)
.052
(1.3)
.220
(5.6)
.316
(8.0)
.337
(8.6)
1.88
(48)
4.00
(102)
40
(178)
.300
(7.6)
.075
(1.9)
.290
(7.4)
.480
(12.2)
8.00
(203)
90
(400)
.300
(7.6)
.075
(1.9)
.290
(7.4)
.480
(12.2)
4.00
(102)
90
(400)
Width
B
in. (mm)
Packaging*
Std.
Pkg.
Qty.
Std.
Ctn.
Qty.
Bulk
Pkg.
Qty.
Bulk
Ctn.
Qty.
GTS, GS2B,
PTS, PPTS or
STS2
—
—
1000
25000
GTS, GS2B,
GTH, GS4H,
PTS, PPTS,
STS2 or STH2
—
—
1000
10000
—
—
1000
5000
GTH, GS4H,
GS4EH,
PPTEH or
STH2
—
—
100
2000
GTH, GS4H,
GS4EH,
PPTEH or
STH2
—
—
250
2500
INTERMEDIATE CROSS SECTION
PLT1.5I-M120‡
5.6
(142)
.142
(3.6)
STANDARD CROSS SECTION
PLT2S-M120‡
PLT4S-M120‡
7.4
(188)
14.5
(368)
.190
(4.8)
LIGHT-HEAVY CROSS SECTION
PLT8LH-C120‡
27.6
(701)
HEAVY CROSS SECTION
PLT4H-TL120‡
14.5
(368)
*Order the number of pieces required in multiples of packaging quantities.
All part numbers shown in standard package quantities unless denoted by ‡.
Most commonly used parts appear in BOLD.
21
HALAR** and TEFZEL*** Cable Ties
PAN-TY ® HALAR**
Fluoropolymer
Cable Ties
HALAR** Cable Ties are UL Listed and UL Recognized as: Suitable for
use in Air Handling Spaces per NEC, Section 300-22 (c) and (d). Many
inspectors look for the distinctive maroon color. HALAR** cable ties have
a low smoke density rating and an excellent flammability rating of
UL94V-0. Other applications include nuclear plants, chemical
environments, telecommunications equipment, aerospace, high and low
temperature environments.
B
E
A REF.
C
D
CURVED TIP
Part Number
Head
Height
D
in. (mm)
Head
Width
E
in. (mm)
Max.
Bundle
Dia.
in. (mm)
Min. Loop
Tensile
Strength
Lbs. (N)
Recommended
PANDUIT ®
Installation Tool
Part No.
.043
(1.1)
.186
(4.7)
.188
(4.8)
.87
(22)
18
(80)
.055
(1.4)
.059
(1.5)
.240
(6.1)
.320
(8.1)
1.88
(48)
3.00
(76)
50
(222)
Length
Width Thickness
A
B
C
in. (mm) in. (mm) in. (mm)
Packaging*
Std.
Pkg.
Qty.
Std.
Ctn.
Qty.
Bulk
Pkg.
Qty.
Bulk
Ctn.
Qty.
GTS, GS2B,
PTS, PPTS
or STS2
100
1000
1000
25000
GTS, GS2B,
GTH, GS4H,
PTS, PPTS,
STS2 or STH2
100
1000
1000
10000
100
1000
1000
5000
MINIATURE CROSS SECTION
PLT1M-C702
4.0
(102)
.098
(2.5)
STANDARD CROSS SECTION
PLT2S-C702
PLT3S-C702
7.4
(188)
11.6
(295)
.190
(4.8)
**HALAR is a registered trademark of Solvay Solexis, Inc.
PAN-TY ®
TEFZEL***
Fluoropolymer
Cable Ties
TEFZEL*** cable ties are ideal for applications requiring resistance to
environmental stresses such as chemical attack, gamma radiation, ultraviolet
radiation and extreme temperatures. In addition, TEFZEL*** has a UL
Flammability rating of UL94V-0. TEFZEL*** ties have a distinctive aqua blue color.
B
E
A REF.
C
D
CURVED TIP
Part Number
Head
Height
D
in. (mm)
Head
Width
E
in. (mm)
Max.
Bundle
Dia.
in. (mm)
Min. Loop
Tensile
Strength
Lbs. (N)
Recommended
PANDUIT ®
Installation Tool
Part No.
.043
(1.1)
.186
(4.7)
.188
(4.8)
.87
(22)
18
(80)
.045
(1.1)
.180
(4.6)
.240
(6.1)
2.00
(51)
.320
(8.1)
Length
Width Thickness
A
B
C
in. (mm) in. (mm) in. (mm)
Packaging*
Std.
Pkg.
Qty.
Std.
Ctn.
Qty.
Bulk
Pkg.
Qty.
GTS, GS2B, PTS,
PPTS or STS2
100
1000
1000 25000
25
(111)
GTS, GS2B, PTS,
PPTS or STS2
100
1000
1000 10000
1.88
(48)
3.00
76)
4.00
(102)
100
1000
1000 10000
50
(222)
GTS, GS2B,
GTH, GS4H,
PTS, PPTS,
STS2 or STH2
100
1000
1000
5000
100
1000
1000
5000
3.00
(78)
4.00
(102)
50
500
250
2500
120
(534)
50
500
250
2500
Bulk
Ctn.
Qty.
MINIATURE CROSS SECTION
PLT1M-C76
4.0
(102)
.098
(2.5)
INTERMEDIATE CROSS SECTION
8.0
.135
PLT2I-C76
(203)
(3.4)
STANDARD CROSS SECTION
PLT2S-C76
PLT3S-C76
PLT4S-C76
7.4
(188)
11.6
(295)
14.6
(371)
.055
(1.4)
.190
(4.8)
.055
(1.4)
.240
(6.1)
HEAVY CROSS SECTION
11.5
PLT3H-L76
PLT4H-L76
(292)
14.6
(371)
.300
(7.6)
.075
(1.9)
.360
(9.1)
.480
(12.2)
GTH, GS4H,
GS4EH
PPTEH or
STH2
***TEFZEL is a registered trademark of E. I. DuPont de Nemours Co.
22
Most commonly used parts appear in BOLD.
*Order the number of pieces required in multiples of package quantities.
All part numbers shown in standard package quantities unless denoted by ‡.
Fluorescent Cable Ties
Designed for packaging and color-coding applications. Ties are
offered in four “hot” colors: Orange, Yellow, Green and Pink.
PAN-TY ® Nylon 6.6
Fluorescent Ties
B
E
A REF.
C
D
CURVED TIP
Part Number
Color
Length
A
in.
(mm)
Width
B
in.
(mm)
Thickness
C
in. (mm)
Head
Height
D
in. (mm)
Head
Width
E
in. (mm)
Max.
Bundle
Dia.
in. (mm)
Min. Loop
Tensile
Strength
Lbs. (N)
Recommended
PANDUIT ®
Installation Tool
Part No.
.098
(2.5)
.043
(1.1)
.154
(3.9)
.180
(4.6)
.87
(22)
18
(80)
GTS, GTH, GS2B,
PTS, PPTS
or STS2
.045
(1.1)
.180
(4.6)
.240
(6.1)
2.00
(51)
30
(133)
GTS, GTH, GS2B,
PTS, PPTS
or STS2
Packaging*
Std.
Pkg.
Qty.
Std.
Ctn.
Qty.
Bulk
Pkg.
Qty.
Bulk
Ctn.
Qty.
—
—
—
—
1000
1000
50000
50000
—
—
—
—
1000
1000
50000
50000
—
—
—
—
1000
1000
25000
25000
—
—
1000
25000
—
—
1000
25000
—
—
—
—
1000
1000
10000
10000
—
—
1000
10000
—
—
1000
10000
—
—
—
—
1000
1000
10000
10000
—
—
1000
10000
—
—
1000
10000
MINIATURE CROSS SECTION
PLT1M-M53
Orange
PLT1M-M54
Yellow
PLT1M-M55
PLT1M-M59
Green
Pink
3.9
(99)
INTERMEDIATE CROSS SECTION
PLT2I-M53
Orange
PLT2I-M54
Yellow
PLT2I-M55
Green
PLT2I-M59
Pink
8.0
(203)
.142
(3.6)
STANDARD CROSS SECTION
PLT2S-M53
PLT2S-M54
Orange
Yellow
PLT2S-M55
Green
PLT2S-M59
Pink
PLT3S-M53
PLT3S-M54
Orange
Yellow
PLT3S-M55
Green
PLT3S-M59
Pink
7.4
(188)
.316
(8.0)
.190
(4.8)
.052
(1.3)
1.88
(48)
.220
(5.6)
11.5
(292)
*Order the number of pieces required in multiples of package quantities.
All part numbers shown in standard package quantities unless denoted by ‡.
50
(222)
.337
(8.6)
3.00
(76)
GTS, GS2B,
GTH, GS4H, PTS,
PPTS, STS2
or STH2
Most commonly used parts appear in BOLD.
23
Part Number Suffix Codes for All PAN-TY ® Cable Ties
Part Number System (Example of PLT2S-C)
PLT
2
Part Description:
P = PANDUIT ®
Size:
Approximate
Maximum Bundle
Diameter in Inches
(at beginning of P/N)
L = Locking
T = Tie
C = Clamp
F = Flag
M = Marker
R = Releasable
W = Wing
P = Push Mount
U = Umbrella
S
—
Cross Section:
SM = Subminiature
M = Miniature
I = Intermediate
S = Standard
LH = Light-Heavy
H = Heavy
EH = Extra-Heavy
Screw Hole Size:
(Clamp Ties Only)
-S4 = #4 (M2.5)
-S6 = #6 (M3)
-S8 = #8 (M4)
-S10 = #10 (M5)
-S25 = 1/4 (M6)
C
Package Size:
Color:
Q = 25
See Material/Color
L = 50
chart. Not all ties
C = 100
available in all colors.
TL = 250
D = 500
M = 1000
XMR = 2 reels/5000 ea.
Material/Color Chart
Material/Color
Nylon 6.6 — Natural (See Note)
Weather Resistant Nylon 6.6 —
Black
Weather Resistant Nylon 6.6 —
Black (meets MIL Spec.)
Nylon 6.6 — Brown
Nylon 6.6 — Red
Nylon 6.6 — Orange
Nylon 6.6 — Yellow
Nylon 6.6 — Green
Nylon 6.6 — Blue
Nylon 6.6 — Purple
Nylon 6.6 — Gray
Nylon 6.6 — White
Nylon 6.6 — Telephone Gray
Nylon 6.6 — Black
PANDUIT ® Mil Spec
Suffix**
Suffix*
✔
9
0
N/A
00
0
1
2
3
4
5
6
7
8
10
14
20
1
2
3
4
5
6
7
8
N/A
N/A
N/A
Material/Color
Heat Stabilized Nylon 6.6 — Black
Heat Stabilized Nylon 6.6 — Natural
Nylon 6.6 — Fluorescent Orange
Nylon 6.6 — Fluorescent Yellow
Nylon 6.6 — Fluorescent Green
Nylon 6.6 — Fluorescent Pink
Flame Retardant Nylon 6.6 — Black
Flame Retardant Nylon 6.6 — Ivory
TEFZEL*** — Aqua Blue
Weather Resistant Polypropylene — Black
Natural Polypropylene — Green
Nylon 12 — Black
Heat Stabilized Weather Resistant
Nylon 6.6 — Black
HALAR**** — Maroon
PANDUIT ® Mil Spec
Suffix**
Suffix*
30
N/A
39
N/A
53
N/A
54
N/A
55
N/A
59
N/A
60
N/A
69
N/A
76
N/A
100
N/A
109
N/A
120
N/A
300
N/A
702
N/A
*NOTE: ✔ designates PANDUIT ® standard Natural Nylon 6.6 color/material. No suffix required in part number.
**NOTE: MIL SPEC Color (suffix) per AS33671 (Formerly MS3367) and SAE AS33681 (Formerly MS3368).
***TEFZEL is a registered trademark of E.I. DuPont de Nemours Co.
****HALAR is a registered trademark of Solvay Solexis, Inc.
Part Number
PLC1M-S4-C
PLC1.5I-S8-C
PLC2S-S6-C
PLC2S-S10-C
PLC3S-S10-C
PLC4S-S10-C
PLC2H-S25-L
PLC4H-S25-L
PLF1M-C
PLF1MA-C
PLF1MB-C
PLM1M-C
PLM2M-C
PLM2S-C
PLM4S-C
24
Standard Packaging
Natural
Nylon
Available Color/
6.6
Material (Suffix)
✔
0
✔
0
✔
0
✔
0, 14
✔
0
✔
0
✔
✔
0
✔
0
✔
3, 4
✔
✔
0
✔
✔
0, 4
✔
Most commonly used parts appear in BOLD.
Bulk Packaging
Part Number
PLC1M-S4-M
PLC1.5I-S8-M
PLC2S-S6-M
PLC2S-S10-M
PLC3S-S10-M
PLC4S-S10-M
PLC2H-S25-TL
PLC4H-S25-TL
PLF1M-M
PLF1MA-M
PLF1MB-M
PLMIM-M
PLM2M-M
PLM2S-D
PLM4S-D
Natural
Nylon 6.6
✔
✔
✔
✔
✔
✔
✔
✔
✔
✔
✔
✔
✔
✔
✔
Available Color/
Material (Suffix)
0, 30
0, 30
0
0, 20, 30
0
0, 30
0, 30
0, 30
0, 2, 3, 4, 6, 10, 69
0, 2, 3, 4, 5, 6, 10
0, 1, 2, 3, 4, 5, 6, 7, 8, 10, 69
0, 4, 6
0, 2, 3, 4, 5, 6, 8
0, 2, 4, 6
Part Number Suffix Codes for All PAN-TY ® Cable Ties
Standard Packaging
Natural
Nylon
Available Color/
6.6
Material (Suffix)
Part Number
PL2M2S-L
✔
0
PL3M2S-L
✔
PLP1.5I-C
✔
Bulk Packaging
Part Number
PL2M2S-D
PL3M2S-D
PLP1.5I-M
PLP1S-M
PLP1.5S-M
PLP2S-M
PLT.6SM-M
PLT.7M-M
PLT1M-M
Natural
Nylon 6.6
✔
✔
✔
✔
✔
✔
✔
✔
✔
Available Color/
Material (Suffix)
0, 4, 10
0, 4
0, 30
0, 30
PLP2S-C
PLT.6SM-C
PLT.7M-C
PLT1M-C
✔
✔
✔
✔
PLT1.5M-C
✔
0
PLT1M-XMR
PLT1.5M-M
✔
✔
PLT2M-C
✔
0
PLT1.5M-XMR
PLT2M-M
✔
✔
PLT1.5I-C
✔
PLT1.5I-M
✔
PLT2I-C
✔
0, 1, 2, 3, 4, 5, 6, 7, 8,
10, 20, 30
0, 14, 30, 76
PLT2I-M
✔
PLT2.5I-C
PLT3I-C
PLT4I-C
PLT1S-C
PLT1.5S-C
PLT2S-C
✔
✔
✔
✔
✔
✔
0
0, 14
0, 14
0
0
0, 00, 1, 2, 3, 4, 5, 6, 7,
8, 10, 20, 30, 76, 702
PLT2.5I-M
PLT3I-M
PLT4I-M
PLT1S-M
PLT1.5S-M
PLT2S-M
✔
✔
✔
✔
✔
✔
PLT2.5S-C
PLT3S-C
✔
✔
0
0, 00, 2, 20, 30, 76, 702
PLT2.5S-M
PLT3S-M
✔
✔
PLT4S-C
✔
PLT4S-M
✔
PLT4.5S-C
PLT5S-C
PLT6LH-L
PLT7LH-L
PLT8LH-L
PLT8LH-Q
PLT9LH-L
PLT10LH-L
PLT2H-L
PLT2.5H-L
PLT3H-L
PLT4H-L
✔
✔
✔
✔
✔
0, 00, 2, 3, 4, 5, 6, 8, 20,
30, 76
0
0
0
0
0
0
0
PLT4.5S-M
PLT5S-M
PLT6LH-C
PLT7LH-C
PLT8LH-C
✔
✔
✔
✔
✔
PLT9LH-C
PLT10LH-C
PLT2H-TL
PLT2.5H-TL
PLT3H-TL
PLT4H-TL
✔
✔
✔
✔
✔
✔
0, 30
PLT4H-C
PLT5H-L
PLT6H-L
PLT8H-Q
PLT8H-L
PLT13H-Q
PLT2EH-Q
✔
✔
✔
PLT5H-C
PLT6H-C
PLT8H-C
✔
✔
✔
0, 30
0, 30
0, 00, 30
PLT13H-C
PLT2EH-C
✔
✔
0, 3
0
✔
✔
✔
✔
✔
✔
✔
✔
0
0, 00, 1, 2, 3, 4, 5, 6, 7,
8, 10, 14, 30, 76, 702
0
0
0, 76
0, 00, 76
0
0
0
0
0
0
0
0, 30
0, 30
0, 30
0, 00, 1, 2, 3, 4, 5, 6, 7, 8, 10, 14,
20, 30, 53, 54, 55, 59, 60, 69, 76,
100, 109, 300, 702
0, 1, 2, 3, 4, 5, 6, 7, 8, 10, 30
0, 00, 1, 2, 3, 4, 5, 6, 7, 8, 10, 14,
20, 30
0, 00, 30
0, 1, 2, 3, 4, 5, 6, 7, 8, 10, 20, 30,
69
0, 00, 1, 2, 3, 4, 5, 6, 7, 8, 10, 20,
30, 69, 100, 109, 120, 300
0, 1, 2, 3, 4, 5, 6, 7, 8, 10, 14, 20,
30, 53, 54, 55, 59, 69, 76, 300
0, 20
0, 2, 3, 4, 5, 6, 8, 10, 14, 20, 30
0, 2, 5, 6, 14, 20, 30
0, 30, 38, 300
0, 30
0, 00, 1, 2, 3, 4, 5, 6, 7, 8, 10, 20,
30, 38, 39, 53, 54, 55, 59, 60, 69,
76, 100, 109, 120, 300, 702
0, 30
0, 00, 1, 2, 3, 4, 5, 6, 7, 8, 10, 20,
30, 53, 54, 55, 59, 76, 100, 109,
702
0, 00, 1, 2, 3, 4, 5, 6, 7, 8, 10, 14,
20, 30, 69, 76, 100, 109, 120, 300
0
0, 2, 3, 4, 5, 6, 8, 30
0
0, 30
0, 120
0, 2, 4, 6, 30, 100, 109, 300
0
0, 30, 76, 100, 109
0, 00, 1, 2, 3, 4, 5, 6, 10, 20, 30,
69, 76, 100, 109, 120, 300
Most commonly used parts appear in BOLD.
25
Part Number Suffix Codes for All PAN-TY ® Cable Ties
Part Number
Standard Packaging
Natural
Nylon
Available Color/
6.6
Material (Suffix)
PLT5EH-Q
✔
0
PLT6EH-Q
✔
0
PLT8EH-Q
PLT10EH-Q
PLT12EH-Q
PLWP1M-C
PLWP1.5I-C
PLWP1S-C
PLWP2S-C
PRT1S-C
PRT1.5S-C
PRT2S-C
PRT3S-C
PRT4S-C
PRT2H-L
PRT3H-L
PRT4H-L
PRT2EH-Q
PRT5EH-Q
PRT6EH-Q
PRT8EH-Q
PRT10EH-Q
PRT12EH-Q
PRWP1S-C
26
0
0
0
✔
✔
✔
✔
✔
✔
✔
✔
✔
✔
✔
✔
✔
✔
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
✔
Most commonly used parts appear in BOLD.
Bulk Packaging
Part Number
PLT3EH-NB-C
PLT5EH-C
PLT5EH-NB-C
PLT6EH-C
PLT6EH-NB-C
PLT8EH-C
PLT10EH-C
PLT12EH-C
PLUP40S-D
PLUP40SE-D
PLWP1M-D
PLWP1.5I-D
PLWP1S-D
PLWP1SA-D
PLWP1SB-D
PLWP1.5S-D
PLWP1.5SA-D
PLWP2S-D
PLWP2SA-D
PLWP2SB-D
PLWP2H-TL
PLWP3H-TL
PLWP30SC-D
PLWP40SC-D
PLWP40SD-D
PLWP50SC-D
PLWP50SE-D
PRLWP30S-D
PRLWP50S-D
PRT1S-M
PRT1.5S-M
PRT2S-M
PRT3S-M
PRT4S-M
PRT2H-TL
PRT3H-TL
PRT4H-TL
PRT2EH-C
PRT5EH-C
PRT6EH-C
PRT8EH-C
PRT10EH-C
PRT12EH-C
PRWP1S-D
PRWP1SA-D
PRWP1SB-D
PRWP1.5S-D
PRWP2S-D
PRWP2H-TL
PRST30S-S14-M
Natural
Nylon 6.6
✔
✔
✔
✔
✔
✔
✔
✔
✔
✔
✔
✔
✔
✔
✔
✔
✔
✔
✔
✔
✔
✔
✔
✔
✔
✔
✔
✔
✔
✔
✔
✔
✔
✔
✔
✔
✔
✔
Available Color/
Material (Suffix)
0
0
0
0
0
0
0
0
30
30
0, 30
30
0, 20, 30
30
0, 30
0, 30
0
30
30
30
30
30
30
30
0
0, 30
0, 2, 3, 4, 6, 7
0
0, 2, 3, 4, 6
0
0
0
0, 100
0, 100
0, 100
0, 100
0
0
0
0, 20, 30
0
30
DOME-TOP ® Barb Ty Cable Ties
DOME-TOP ® Barb Ty Cable Tie Features/Benefits
1. DOME -TOP ® Head
2. Stainless Steel Barb
3. Low Threading Force
• Unique patented design
• Round smooth edges
• No irritation to installer’s hands
• Made of 316 corrosion resistant
stainless steel
• Provides consistent
performance and reliability for
users who prefer a cable tie
with a metal barb
• Infinitely adjustable for tight
bundles through its entire
bundle range
• Reduces installer fatigue
• Increases productivity
4. High Tensile Strength
5. Anti-Slip Strap Body
6. Finger Tip Grip
• Exceeds industry and
Aerospace Standard
SAE (AS23190) standards
• Available in four loop tensile
strengths from 18 lbs. (80N) to
120 lbs. (534N) to provide a
wide selection
• Ribbed and stippled strap
body prevents axial and
lateral movement
• Exclusively designed finger
grip is available on all sizes
of DOM E-TOP ® Barb Ty Cable
Ties to assure positive grip
during threading of the tie
7. Curved Tip
8. Material/Size Availability
• Orients tip toward head to speed
installation; lowers installed cost
• Faster initial threading
• Easier to pick up from flat surfaces
• Available in lengths from 4.0"
(102mm) to 30.7" (780mm) to
meet a variety of applications
• Several materials available for
special environments: Natural 6.6
nylon, weather resistant black 6.6
nylon, heat stabilized 6.6 nylon
and 11 different colors
Most commonly used parts appear in BOLD.
27
DOME-TOP ® Barb Ty Cable Ties (BT Series)
• Available in Miniature, Intermediate, Standard and
Light-Heavy cross sections
• Bundle diameters up to 9.00" (229mm)
• Available in natural, weather resistant and heat stabilized
nylon and 11 different colors
• Tool or hand installed
DOME-TOP ® Barb Ty
Nylon 6.6 Locking
Cable Ties
B
E
A REF.
STRAIGHT TIP
C
D
CURVED TIP
Side View
Front View
PartNumber
Length
Width
A
B
in. (mm) in. (mm)
Thickness
C
in. (mm)
Head
Height
D
in. (mm)
Head
Width
E
in. (mm)
Max.
Bundle
Dia.
in. (mm)
.172
(4.4)
.90
(23)
1.50
(38)
2.00
(51)
4.00
(102)
Min. Loop
Tensile
Strength
Lbs. (N)
Recommended
PANDUIT ®
Installation
Tool Part No.
Packaging*
Std.
Pkg.
Qty.*
Std.
Ctn.
Qty.
Bulk
Pkg.
Qty.
Bulk
Ctn.
Qty.
100
1000
1000
50000
100
1000
1000
25000
100
1000
1000
25000
100
1000
1000
10000
100
1000
1000
25000
100
1000
1000
25000
100
1000
1000
10000
100
1000
1000
10000
100
1000
1000
10000
100
1000
1000
10000
100
1000
1000
10000
50
500
250
2500
50
500
250
2500
50
500
250
2500
50
500
100
2000
50
500
100
2000
50
500
100
2000
50
500
100
1000
50
500
100
1000
MINIATURE CROSS SECTION
BT1M-C
BT1.5M-C
BT2M-C
BT4M-C
4.0
(102)
6.3
(160)
7.9
(201)
14.2
(361)
.036
(0.9)
.095
(2.4)
.046
(1.2)
.156
(4.0)
.182
(4.6)
GTS, GS2B,
PTS, PPTS
or STS2
18
(80)
INTERMEDIATE CROSS SECTION
BT1.5I-C
BT2I-C
BT3I-C
BT4I-C
6.1
(155)
8.0
(203)
11.3
(287)
14.3
(363)
.041
(1.0)
.141
(3.6)
.185
(4.7)
.248
(6.3)
.049
(1.2)
1.50
(38)
2.00
(51)
3.00
(76)
4.00
(102)
40
(178)
GTS, GS2B,
PTS, PPTS
or STS2
STANDARD CROSS SECTION
BT2S-C
BT3S-C
BT4S-C
8.0
(203)
12.0
(305)
15.1
(384)
.045
(1.2)
.185
(4.7)
.052
(1.3)
.220
(5.6)
.320
(8.1)
2.00
(51)
3.00
(76)
4.00
(102)
50
(222)
GTS, GS2B,
GTH, GS4H,
PTS, PPTS,
STS2 or STH2
LIGHT-HEAVY CROSS SECTION (STRAIGHT TIP)
BT2LH-L
BT3LH-L
BT4LH-L
BT5LH-L
BT6LH-L
BT7LH-L
BT8LH-L
BT9LH-L
28
8.7
(221)
11.8
(300)
14.9
(378)
18.1
(460)
21.2
(538)
.275
(7.0)
.065
(1.7)
24.4
(620)
27.5
(699)
30.7
(780)
Most commonly used parts appear in BOLD.
.320
(8.1)
.520
(13.2)
2.00
(51)
3.00
(76)
4.00
(102)
5.00
(127)
6.00
(152)
7.00
(178)
8.00
(203)
9.00
(229)
120
(534)
GTH, GS4H,
GS4EH,
PPTEH, STH2
or ST2EH
*Order the number of pieces required in multiples of package quantities.
For colors and other materials, see pages 34-35.
All part numbers shown in standard package quantities unless denoted by ‡.
Weather Resistant DOME-TOP ® Barb Ty Cable Ties (BT Series)
• Available in Miniature, Intermediate, Standard and
Light-Heavy cross sections
• Bundle diameters up to 9.00" (229mm)
• Weather resistant nylon has greater resistance to ultraviolet
light which damages natural nylon
• Tool or hand installed
DOME-TOP ® Barb Ty
Weather Resistant Nylon
6.6 Locking Cable Ties
B
E
A REF.
Except LH -0 Ties
STRAIGHT TIP
C
D
CURVED TIP
Side View
Part
Number
Front View
Length
A
in. (mm)
Width
B
in.
(mm)
Thickness
C
in. (mm)
Except LH -0 Ties
Head
Height
D
in. (mm)
Head
Width
E
in. (mm)
Max.
Bundle
Dia.
in. (mm)
.172
(4.4)
.90
(23)
1.50
(38)
2.00
(51)
Min. Loop
Tensile
Strength
Lbs. (N)
Recommended
PANDUIT ®
Installation Tool
Part No.
Packaging*
Std.
Pkg.
Qty.
Std.
Ctn.
Qty.
Bulk
Pkg.
Qty.
Bulk
Ctn.
Qty.
100
1000
1000
50000
100
1000
1000
25000
100
1000
1000
25000
4.00
(102)
100
1000
1000
10000
1.50
(38)
2.00
(51)
100
1000
1000
25000
100
1000
1000
25000
100
1000
1000
10000
100
1000
1000
10000
100
1000
1000
10000
100
1000
1000
10000
100
1000
1000
5000
50
500
250
2500
50
500
250
2500
50
500
250
2500
50
500
100
2000
50
500
100
2000
50
500
100
2000
50
500
100
1000
50
500
100
1000
MINIATURE CROSS SECTION
BT1M-C0
BT1.5M-C0
BT2M-C0
BT4M-C0
4.0
(102)
6.3
(160)
7.9
(201)
.036
(0.9)
.095
(2.4)
.046
(1.2)
.156
(4.0)
.182
(4.6)
14.2
(361)
18
(80)
GTS, GS2B, PTS,
PPTS or STS2
INTERMEDIATE CROSS SECTION
BT1.5I-C0
BT2I-C0
BT3I-C0
BT4I-C0
6.1
(155)
8.0
(203)
11.3
(287)
.041
(1.0)
.141
(3.6)
.185
(4.7)
.248
(6.3)
.049
(1.2)
14.3
(363)
3.00
(76)
4.00
(102)
40
(178)
GTS, GS2B, PTS,
PPTS or STS2
STANDARD CROSS SECTION
BT2S-C0
BT3S-C0
BT4S-C0
8.0
(203)
12.0
(305)
15.1
(384)
.045
(1.2)
.185
(4.7)
.052
(1.3)
.220
(5.6)
.320
(8.1)
2.00
(51)
3.00
(76)
4.00
(102)
50
(222)
GTS, GS2B
GTH, GS4H,
PTS, PPTS,
STS2 or STH2
LIGHT-HEAVY CROSS SECTION (STRAIGHT TIP)
BT2LH-L0
BT3LH-L0
BT4LH-L0
BT5LH-L0
BT6LH-L0
BT7LH-L0
BT8LH-L0
BT9LH-L0
8.7
(221)
11.8
(300)
2.00
(51)
3.00
(76)
14.9
(378)
18.1
(460)
21.2
(538)
24.4
(620)
4.00
(102)
5.00
(127)
6.00
(152)
7.00
(178)
.275
(7.0)
.065
(1.7)
.320
(8.1)
27.5
(699)
30.7
(780)
*Order the number of pieces required in multiples of package quantities.
For colors and other materials, see pages 34-35.
All part numbers shown in standard package quantities unless denoted by ‡
.520
(13.2)
8.00
(203)
9.00
(229)
120
(534)
GTH, GS4H,
GS4EH,
PPTEH, STH2,
or ST2EH
Most commonly used parts appear in BOLD.
29
DOME-TOP ® Barb Ty Heat Stabilized Cable Ties (BT Series)
• Available in Miniature, Intermediate, Standard and
Light-Heavy cross sections
• Bundle diameters up to 4.00" (102mm)
• Temperature rating: -40°F (-40°C) to 239°F (115°C)
DOME-TOP ® Barb Ty
Heat Stabilized
Nylon 6.6 —
Natural Color
B
E
A REF.
STRAIGHT TIP
C
D
CURVED TIP
Front View
Side View
Part Number
Length
A
in. (mm)
Width
B
in. (mm)
Thickness
C
in. (mm)
Head
Height
D
in. (mm)
Head
Width
E
in. (mm)
Max.
Bundle
Dia.
in. (mm)
Min. Loop
Tensile
Strength
Lbs. (N)
Recommended
PANDUIT ®
Installation Tool
Part No.
.036
(0.9)
.156
(4.0)
.172
(4.4)
.90
(23)
18
(80)
.041
(1.0)
.185
(4.7)
.248
(6.3)
1.50
(38)
Packaging*
Std.
Pkg.
Qty.
Std.
Ctn.
Qty.
Bulk
Pkg.
Qty.
Bulk
Ctn.
Qty.
GTS, GS2B, PTS,
PPTS or STS2
—
—
1000
50000
40
(178)
GTS, GS2B, PTS,
PPTS or STS2
—
—
1000
25000
—
—
1000
10000
50
(222)
GTS, GS2B
GTH, GS4H, PTS,
PPTS, STS2
or STH2
—
—
1000
10000
—
—
1000
5000
—
—
250
2500
MINIATURE CROSS SECTION
BT1M-M39‡
4.0
(102)
.095
(2.4)
INTERMEDIATE CROSS SECTION
BT1.5I-M39‡
6.1
(155)
.141
(3.6)
STANDARD CROSS SECTION
BT2S-M39‡
BT3S-M39‡
BT4S-M39‡
.045
(1.2)
8.0
(203)
12.0
(305)
15.1
(384)
.185
(4.7)
.052
(1.3)
2.00
(51)
.220
(5.6)
.320
(8.1)
3.00
(76)
4.00
(102)
LIGHT-HEAVY CROSS SECTION (STRAIGHT TIP)
BT4LH-TL39‡
14.9
(378)
.275
(7.0)
.065
(1.7)
.320
(8.1)
.520
(13.2)
4.00
(102)
120
(534)
GTH,GS4H,
GS4EH, PPTEH,
STH2 or ST2EH
Push mount ties are used to attach a cable bundle to a surface
such as a flat panel. The anchor is easily pressed into a
pre-drilled hole and locks in place. The wings provide constant
tension when installed, creating a stable, secure fixture and
rattle-free installation.
DOME-TOP ® Barb Ty
Nylon 6.6 Winged Push
Mount Ties
B
A REF.
D
C
Part Number
Length
A
in.
(mm)
Width
B
in.
(mm)
Head
Height
D
in. (mm)
Nominal
Hole Dia.
in. (mm)
Max. Panel
Thickness
in. (mm)
Max.
Bundle
Dia.
in. (mm)
Min. Loop
Tensile
Strength
Lbs. (N)
Recommended
PANDUIT ®
Installation
Tool Part No.
.041
(1.0)
.280
(7.1)
.187
(4.7)
.093
(2.4)
1.50
(38)
40
(178)
.052
(1.3)
.370
(9.4)
.250
(6.4)
.156
(4.0)
2.00
(51)
50
(222)
Thickness
C
in. (mm)
Packaging*
Std.
Pkg.
Qty.
Std.
Ctn.
Qty.
Bulk
Pkg.
Qty.
Bulk
Ctn.
Qty.
GTS, GS2B,
PTS, PPTS
or STS2
—
—
500
5000
GTS, GS2B
GTH, GS4H,
PTS, PPTS,
STS2 or STH2
—
—
500
5000
INTERMEDIATE CROSS SECTION
BW1.5I-D
6.6
(168)
.141
(3.6)
STANDARD CROSS SECTION
BW2S-D
30
8.5
(216)
.185
(4.7)
Most commonly used parts appear in BOLD.
*Order the number of pieces required in multiples of package quantities.
For colors and other materials, see pages 34-35.
All part numbers shown in standard package quantities unless denoted by ‡
DOME-TOP ® Barb Ty Clamp Ties
DOME-TOP ® Barb Ty
Nylon 6.6 Clamp Ties
• Used to secure a bundle to another surface
• The design allows for bundling before or after screwing clamp in place
• Available in Miniature, Intermediate, Standard and
Light-Heavy cross sections
• Bundle diameters up to 4.00" (102mm)
• Available in natural, weather resistant and heat stabilized black nylon
F
B
E
A REF.
Side View
Part Number
STRAIGHT TIP
C
D
CURVED TIP
Front View
Nominal
Length Width
Boss
Boss
Hole
Max.
Min. Loop Recommended
A
B
Thickness Height
Width
Dia.
Screw Bundle
Tensile
PANDUIT ®
in.
in.
C
D
E
F
Size
Dia.
Strength Installation Tool
(mm)
Part No.
(mm)
in. (mm) in. (mm) in. (mm) in.(mm) (Metric) in. (mm) Lbs. (N)
Packaging*
Std.
Pkg.
Qty.
Std.
Ctn.
Qty.
Bulk
Pkg.
Qty.
100
1000
1000 50000
100
1000
1000 25000
100
1000
1000 25000
100
1000
500
10000
—
—
500
10000
100
1000
500
5000
50
500
250
2500
Bulk
Ctn.
Qty.
MINIATURE CROSS SECTION
BC1MS4-M‡
BC2M-S4-M‡
4.6
(117)
8.3
(211)
.095
(2.4)
.095
(2.4)
.046
(1.2)
.046
(1.2)
.156
(4.0)
.156
(4.0)
.234
(5.9)
.234
(5.9)
.124
(3.15)
.124
(3.15)
#4
(M2.5)
#4
(M2.5)
.90
(23)
2.0
(51)
18
(80)
GTS, GS2B,
PTS, PPTS
or STS2
.041
(1.0)
.166
(4.2)
.330
(8.4)
.180
(4.57)
#8
(M4)
1.5
(38)
40
(178)
GTS, GS2B,
PTS, PPTS
or STS2
#10
(M5)
2.00
(51)
3.00
(76)
4.00
(102)
50
(222)
4.00
(102)
120
(534)
INTERMEDIATE CROSS SECTION
BC1.5I-S8-M‡
6.6
(168)
.141
(3.6)
STANDARD CROSS SECTION
BC2S-S10-C
BC3S-S10-D
BC4S-S10-C
8.5
(216)
12.5
(318)
15.6
(396)
.185
(4.7)
.052
(1.3)
.160
(4.1)
.400
(10.2)
.206
(5.2)
GTS, GS2B,
GTH, GS4H, PTS,
PPTS, STS2
or STH2
LIGHT-HEAVY CROSS SECTION (STRAIGHT TIP)
BC4LH-S25-L
15.5
(394)
.275
(7.0)
.065
(1.7)
.265
(6.7)
.520
(13.2)
.260
(6.6)
1/4
(M6)
GTH, GS4H,
GS4EH, PPTEH,
STH2 or ST2EH
DOME-TOP ® Barb Ty Weather Resistant Nylon Clamp Ties
Except Light Heavy
Part Number
Nominal
Min.
Length Width
Boss
Boss
Hole
Max.
Loop
B
A
Thickness Height
Width
Screw Bundle Tensile
Dia.
in.
C
in.
D
E
F
Dia.
Size
Strength
(mm)
(mm)
in. (mm) in. (mm) in. (mm) in. (mm) (Metric) in. (mm) Lbs. (N)
Packaging*
Recommended
PANDUIT ®
Installation
Tool Part No.
Std.
Pkg.
Qty.
Std.
Ctn.
Qty.
Bulk Bulk
Pkg. Ctn.
Qty. Qty.
100
500
1000 10000
—
—
1000 10000
100
500
1000 5000
50
500
250
STANDARD CROSS SECTION
BC2S-S10-C0
BC3S-S10-D0
BC4S-S10-C0
8.5
(216)
12.5
(318)
15.6
(396)
.185
(4.7)
.052
(1.3)
.160
(4.1)
.400
(10.2)
.206
(5.2)
#10
(M5)
2.00
(51)
3.00
(76)
4.00
(102)
50
(222)
4.00
(102)
120
(534)
GTS, GS2B,
GTH, GS4H, PTS,
PPTS, STS2
or STH2
LIGHT-HEAVY CROSS SECTION
BC4LH-S25-L0
15.5
(394)
.275
(7.0)
.065
(1.7)
.265
(6.7)
*Order the number of pieces required in multiples of package quantities.
For colors and other materials, see pages 34-35.
All part numbers shown in standard package quantities unless denoted by ‡.
.520
(13.2)
.260
(6.6)
1/4
(M6)
GTH, GS4H,
GS4EH,
PPTEH, STH2
or ST2EH
Most commonly used parts appear in BOLD.
2500
31
DOME-TOP ® Barb Ty Marker and Flag Ties (BM/BF Series)
• Used to fasten and identify bundles at the same time
• They can be marked with PANDUIT ® Marker Pens, Custom Hot
Stamping Service on page 52 or Computer Printable Labels
• Available in Miniature and Standard Cross Section
• Bundle diameters up to 4.00" (102mm)
• Available in natural and weather resistant nylon
DOME-TOP ® Barb Ty
Nylon 6.6 Marker
and Flag Ties
Part Number
Length
Width
Thickness
A
B
C
in. (mm) in. (mm) in. (mm)
BM1M
BM2M
Max.
Bundle
Dia.
in. (mm)
Head
Height
D
in. (mm)
Head
Width
E
in. (mm)
Marker
Write-on
Area
in. (mm)
.156
(4.0)
.182
(4.6)
.29 x 1.09
(7.4) x (27.7)
Min. Loop
Tensile
Strength
Lbs. (N)
Recommended
PANDUIT ®
Installation Tool
Part No.
18
(80)
GTS, GS2B
PTS, PPTS
or STS2
Packaging*
Std.
Pkg.
Qty.
Std.
Ctn.
Qty.
Bulk
Pkg.
Qty.
100
1000
1000 25000
100
1000
1000 25000
Bulk
Ctn.
Qty.
MINIATURE CROSS SECTION
BM1M-C
BM2M-C
Part Number
4.2
(107)
7.9
(201)
.095
(2.4)
Length
Width
A
B
in. (mm) in. (mm)
.046
(1.2)
.90
(23)
2.00
(51)
BF1M
BF2M
Max.
Bundle
Dia.
in. (mm)
Thickness
C
in. (mm)
Head
Height
D
in. (mm)
Head
Width
E
in. (mm)
Marker
Write-on
Area
in. (mm)
.046
(1.2)
.156
(4.0)
.182
(4.6)
.36 x .81
(9.1) x (20.6)
Min. Loop
Tensile
Strength
Lbs. (N)
Recommended
PANDUIT ®
Installation Tool
Part No.
18
(80)
GTS, GS2B,
PTS, PPTS
or STS2
Min. Loop
Tensile
Strength
Lbs. (N)
Recommended
PANDUIT ®
Installation Tool
Part No.
50
(222)
GTS, GS2B
GTH, GS4H, PTS,
PPTS or STH2
Packaging*
Std.
Pkg.
Qty.*
Std.
Ctn.
Qty.
Bulk
Pkg.
Qty.
100
1000
1000 25000
100
1000
1000 25000
Bulk
Ctn.
Qty.
MINIATURE CROSS SECTION
BF1M-C
BF2M-C
4.6
(117)
8.3
(211)
.095
(2.4)
BM2S
Part Number
Length
Width
A
B
in. (mm) in. (mm)
Thickness
C
in. (mm)
Head
Height
D
in. (mm)
Head
Width
E
in. (mm)
.220
(5.6)
.320
(8.1)
.90
(23)
2.00
(51)
BM4S
Marker
Write-on
Area
in. (mm)
Max.
Bundle
Dia.
in. (mm)
.49 x .91
(12.4) x (23.1)
2.00
(51)
.50 x 2.13
(12.7) x (54.1)
4.00
(102)
Packaging*
Std.
Pkg.
Qty.
Std.
Ctn.
Qty.
Bulk
Pkg.
Qty.
Bulk
Ctn.
Qty.
100
1000
500
10000
100
1000
500
10000
STANDARD CROSS SECTION
BM2S-C
BM4S-C
32
8.0
(203)
15.1
(384)
.185
(4.7)
.045
(1.2)
.052
(1.3)
Most commonly used parts appear in BOLD.
*Order the number of pieces required in multiples of package quantities.
For colors and other materials, see pages 34-35.
All part numbers shown in standard package quantities unless denoted by ‡
DOME-TOP ® Barb Ty Marker Ties/DURA -TY ™ Cable Ties
DOME-TOP ® Barb Ty
Nylon 6.6 Marker
Ties (con’t)
B2M2S
E
E
B
B
A
A
B3M2S
Length
A
in. (mm)
Part Number
Width
B
in.
(mm)
B4M2S
Thickness
C
in. (mm)
Head
Height
D
in. (mm)
Head
Width
E
in. (mm)
Marker
Write-On
Area
in. (mm)
Max.
Bundle
Dia.
in. (mm)
Min. Loop
Tensile
Strength
Lbs. (N)
Recommended
PANDUIT ®
Installation Tool
Part No.
50
(222)
GTS, GS2B,
GTH, GS4H, PTS,
PPTS, STS2
or STH2
Packaging*
Std.
Pkg.
Qty.*
Std.
Ctn.
Qty.
Bulk
Pkg.
Qty.
Bulk
Ctn.
Qty.
50
500
500
2500
50
500
250
2500
50
500
250
2500
STANDARD CROSS SECTION
B2M2S-D‡
11.5 x .91
(29.2) x (23.1)
B3M2S-TL‡
8.0
(203)
.185
(4.7)
.045
(1.2)
.220
(5.6)
.320
(8.1)
B4M2S-TL‡
1.81 x .91
(46.0) x (23.1)
2.00
(51)
2.47 x .91
(62.7) x (23.1)
• Ideal for all outdoor messenger strand applications including
telephone, cable TV, traffic signals and outside plant
power services
• Weather Resistant Acetal strap body and head
• Double stainless steel Type 302 locking barbs
• High tensile strength and high impact resistance
• Excellent chemical and moisture resistance
• 250 lbs. Minimum loop tensile strength
• Meets Telcordia TR-TSY-000789
• May be used with Stackable Cable Spacers SACS50-T100
(see page 107)
DURA-TY ™ Weather
Resistant Cable Ties
A
C
D
E
Part
Number
Description
Length
(A)
in. (mm)
B
Strap
Head
Width Thickness Height
(B)
(C)
in.
in. (mm) in. (mm)
(mm)
Head
Width
in.
(mm)
.490
(12.4)
.718
(18.2)
—
—
.490
(12.4)
.718
(18.2)
Max
Min. Loop Recommended
Bundle
Tensile
PANDUIT ®
Dia.
Strength Installation Tool
Part No.
in. (mm) N (Lbs.)
Packaging*
Std.
Pkg.
Qty.
Std.
Ctn.
Qty.
Bulk
Pkg.
Qty.
Bulk
Ctn.
Qty.
50
1000
—
—
25
500
—
—
1
20
—
—
EXTRA-HEAVY CROSS SECTION
DT4EH-L0
DT8EH-Q0
Cable
Tie
13.5
(343)
27.0
(686)
DTREH-LR0
50' Reel of
Strapping
600.0
(15,240)
DTHEH-Q0
Bag of 25 Cable
Tie Heads
—
DURA -TY ™ Kit 50 ft.
Reel of Strapping
600.0
(15,240)
DTKEH-0
.500
(12.7)
—
.500
(12.7)
.059
(1.5)
—
.059
(1.5)
*Order the number of pieces required in multiples of package quantities.
For colors and other materials, see pages 34-35.
All part numbers shown in standard package quantities unless denoted by ‡
3.87
(98)
8.00
(203)
250
(1112)
GTH, GS4H,
ST2EH
or GS4EH
As
Needed
—
—
25
500
—
—
As
Needed
250
(1112)
1
20
—
—
Most commonly used parts appear in BOLD.
33
™
Part Number Suffix Codes for all DOME-TOP ® Barb Ty and DURA-TY Cable Ties
Part Number System (Example of BT1M-C)
T
Part Description:
BT = Barb Ty
BC = Barb Clamp
BF = Barb Flag
BM = Barb Marker
BW = Barb Wing
DT = DU RA-TY ™
—
Screw Hole Size:
(Clamp Ties Only)
-S4 = #4 (M2.5)
-S6 = #6 (M3)
-S8 = #8 (M4)
-S10 = #10 (M5)
-S25 = 1/4 (M6)
Cross Section:
M = Miniature
I = Intermediate
S = Standard
LH = Light-Heavy
EH = Extra-Heavy
Size:
Approximate
Maximum Bundle
Diameter in Inches
C
Package Size:
Q = 25
L = 50
C = 100
TL = 250
D = 500
M = 1000
LR = 50' Reel
0 = DT Kit
Color:
See Material/Color
chart. Not all ties
available in all colors.
Material/Color Chart
Material/Color
Nylon 6.6 — Natural (See Note)
PANDUIT ® Mil Spec
Suffix**
Suffix*
✔
9
Weather Resistant Nylon 6.6 —
Black
Nylon 6.6 — Brown
Nylon 6.6 — Red
Nylon 6.6 — Orange
Nylon 6.6 — Yellow
0
N/A
1
2
3
4
1
2
3
4
Nylon 6.6 — Green
5
5
Material/Color
Nylon 6.6 — Blue
Nylon 6.6 — Purple
Nylon 6.6 — Gray
Nylon 6.6 — White
Nylon 6.6 — Telephone Gray
Nylon 6.6 — Black
Heat Stabilized Nylon 6.6 — Black
Heat Stabilized Nylon 6.6 — Natural
PANDUIT ® Mil Spec
Suffix**
Suffix*
6
6
7
7
8
8
10
N/A
14
N/A
20
N/A
30
N/A
39
N/A
* NOTE: ✔ designates PANDUIT ® standard Natural Nylon 6.6 color/material. No suffix required in part number.
** NOTE: MIL SPEC Color (suffix) per AS33671 (Formerly MS3367) and SAE AS33681 (Formerly MS3368).
Part
Number
Standard Packaging
Natural
Nylon
Available Color/
6.6
Material (Suffix)
BC2S-S10-C
✔
0
BC4S-S10-C
BC4LH-S25-L
BF1M-C
BF2M-C
BM1M-C
BM2M-C
BM2S-C
BM4S-C
BT1M-C
BT1.5M-C
BT2M-C
BT4M-C
BT1.5I-C
BT2I-C
BT3I-C
BT4I-C
✔
✔
✔
✔
✔
✔
✔
✔
✔
✔
✔
✔
✔
✔
✔
✔
0
0
34
0, 30
0
0
0
0
0
0
0
Most commonly used parts appear in BOLD.
Bulk Packaging
Part
Number
BC1M-S4-M
BC2M-S4-M
BC1.5I-S8-M
BC2S-S10-D
BC3S-S10-D
BC4S-S10-D
BC4LH-S25-TL
BF1M-M
BF2M-M
BM1M-M
BM2M-M
BM2S-D
BM4S-D
BT1M-M
BT1.5M-M
BT2M-M
BT4M-M
BT1.5I-M
BT2I-M
BT3I-M
BT4I-M
Natural
Nylon
6.6
✔
✔
✔
✔
✔
✔
✔
✔
✔
✔
✔
✔
✔
✔
✔
✔
✔
✔
✔
✔
✔
Available Color/
Material (Suffix)
0
0
0
0
0
0, 30
0
0
0
0
0
0
0
0, 1, 2, 3, 4, 5, 6, 7, 8, 10, 30, 39
0, 30
0, 2, 3, 4, 5, 6, 8, 30
0
0, 1, 2, 3, 4, 5, 6, 7, 8, 10, 30, 39
0, 30
0, 30
0, 14
Part Number Suffix Codes for all DOME-TOP ® Barb Ty and DURA-TY ™ Cable Ties
Standard Packaging
Part
Number
BT2S-C
BT3S-C
BT4S-C
BT2LH-L
BT3LH-L
BT4LH-L
BT5LH-L
BT6LH-L
BT7LH-L
BT8LH-L
BT9LH-L
Natural
Nylon 6.6
✔
0
✔
✔
✔
✔
✔
✔
✔
✔
✔
✔
0, 2
0
0
0
0
0
0
0
0
0
1
DTHEH-Q
DTKEH
1
DTREH-LR
0
1
0
0
DT4EH-L
DT8EH-Q
0
0
1
1
Available Color/
Material (Suffix)
Bulk Packaging
Part
Number
BT2S-M
BT3S-M
BT4S-M
BT2LH-TL
BT3LH-TL
BT4LH-TL
BT5LH-C
BT6LH-C
BT7LH-C
BT8LH-C
BT9LH-C
BW1.5I-D
BW2S-D
B2M2S-D
B3M2S-TL
B4M2S-TL
Natural
Available Color/
Nylon 6.6
Material (Suffix)
✔
0, 1, 2, 3, 4, 5, 6, 7, 8, 10, 20,
30, 39
✔
0, 30, 39
✔
0, 2, 3, 4, 5, 6, 7, 8, 10, 30, 39
✔
0
✔
0
✔
0, 30, 39
✔
0
✔
0
✔
0
✔
0
✔
0
✔
✔
0
✔
0
✔
0
✔
0
NOTE 1: DURA-TY ™ Weather Resistant Acetal Strap Body and Head.
Most commonly used parts appear in BOLD.
35
CONTOUR-TY ® Cable Ties
• Head designed for no protrusion of cut-off tie
• Tie configuration limits exposure to sharp edges to protect
adjacent cables and installers arms and hands
• Low profile head reduces overall bundle size
• Locking wedge is fully enclosed to insure consistent
strength and lasting performance
• Fully rounded edges on head and strap protect cable
insulation/jacket
• Rounded tip and aggressive grip for faster initial threading
CONTOUR-TY ® Cable Ties
Nylon 6.6 and Weather
Resistant Nylon 6.6
B
E
A
C
D
Part Number
Length
A
in. (mm)
Width
B
in. (mm)
Thickness
C
in. (mm)
Head
Height
D
in. (mm)
Max.
Min.
Head Bundle Loop
Width
Dia.
Tensile
E
in.
Strength
in. (mm) (mm) Lbs. (N)
Packaging*
Recommended
PANDUIT ®
Installation Tool
Part No.
Std.
Pkg.
Qty.
Std.
Ctn.
Qty.
Bulk
Pkg.
Qty.
Bulk
Ctn.
Qty.
—
—
1000
50000
—
—
1000
50000
2.00
(51)
—
—
1000
25000
1.50
(38)
—
—
1000
25000
—
—
1000
10000
4.00
(102)
—
—
1000
10000
2.00
(51)
—
—
1000
10000
—
—
1000
5000
—
—
1000
5000
—
—
500
5000
—
—
250
2500
—
—
100
2000
MINIATURE CROSS SECTION
CBR1M-M‡
CBR1M-M0‡
CBR1.5M-M‡
CBR1.5M-M0‡
CBR2M-M‡
CBR2M-M0‡
4.1
(104)
5.6
(142)
.038
(1.0)
.098
(2.5)
7.2
(183)
.042
(1.1)
.195
(5.0)
.208
(5.3)
.209
(5.3)
1.00
(25)
1.50
(38)
18
(80)
GTS, GS2B, PTS
or PPTS
INTERMEDIATE CROSS SECTION
CBR1.5I-M‡
CBR1.5I-M0‡
CBR3I-M‡
CBR3I-M0‡
CBR4I-M‡
CBR4I-M0‡
5.9
(150)
10.4
(264)
.040
(1.0)
.140
(3.6)
13.6
(345)
.052
(1.3)
.250
(6.4)
.250
(6.4)
.262
(6.7)
3.00
(76)
40
(178)
GTS, GS2B, PTS
or PPTS
STANDARD CROSS SECTION
CBR2S-M‡
CBR2S-M0‡
CBR3S-M‡
CBR3S-M0‡
CBR4S-M‡
CBR4S-M0‡
7.6
(193)
10.8
(274)
.044
(1.1)
.190
(4.8)
14.0
(356)
.052
(1.3)
.290
(7.1)
.332
(8.4)
3.00
(76)
50
(222)
GTS, GS2B, PTS
or PPTS
4.00
(102)
HEAVY-STANDARD CROSS SECTION
CBR2HS-D‡
CBR2HS-D0‡
8.0
(203)
.250
(6.4)
.058
(1.4)
.326
(8.2)
.388
(9.9)
2.00
(51)
85
(378)
GTH or GS4H
120
(534)
GTH, GS4H
or PPTEH
LIGHT-HEAVY CROSS SECTION
CBR4LH-TL‡
CBR4LH-TL0‡
CBR6LH-C‡
CBR6LH-C0‡
36
14.6
(371)
20.9
(531)
.300
(7.6)
Most commonly used parts appear in BOLD.
.070
(1.8)
.400
(10.2)
.490
(12.4)
4.00
(102)
6.00
(152)
*Order the number of pieces required in multiples of package quantities.
For colors and other materials, see page 39.
All part numbers shown in standard package quantities unless denoted by ‡.
BELT-TY ™ In-Line Cable Ties
BELT-TY ™ In-Line Cable Ties Nylon 6.6
• Protects adjacent cables and protects
workers arms and hands
• Avoids snags and reduces overall bundle size
• No sharp edges in contact with cable insulation
• Easy to grip for assembly
• Positive grip when threading tie
• Material: Nylon 6.6
• Head designed for no protrusion of cut-off tie
• Low profile head (35% lower than conventional
90° entry cable ties)
• Fully rounded edges on head and strap
• Rounded tip and aggressive grip
• Finger grip shaped head
• Curved tip
B
E
A
C
D
• Parallel-entry cable ties that thread like a belt (at 180°) with the same
performance of conventional (90° entry) cable ties
• The BELT -TY ™ In-Line Cable Tie design reduces the long cut-off
danger of an incorrectly applied conventional cable tie
Part Number
Length
A
in. (mm)
Width
B
in. (mm)
Thickness
C
in. (mm)
Head
Height
D
in. (mm)
Head
Width
E
in. (mm)
Max.
Bundle
Dia.
in. (mm)
Min. Loop
Tensile
Strength
Lbs. (N)
Recommended
PANDUIT ®
Installation
Tool Part No.
.044
(1.1)
.110
(2.8)
.190
(4.8)
1.10
(28)
18
(80)
.052
(1.3)
.130
(3.3)
.260
(6.6)
1.38
(35)
.316
(8.0)
Packaging*
Bulk
Pkg.
Qty.
Std.
Pkg.
Qty.
Std.
Ctn.
Qty.
GTS, GS2B,
PTS or PPTS
—
—
1000
50,000
30
(133)
GTS, GS2B,
PTS or PPTS
—
—
1000
25,000
1.88
(48)
3.00
(76)
4.00
(102)
—
—
1000
10,000
50
(222)
GTS, GS2B,
GTH, GS4H,
PTS or PPTS
—
—
1000
5000
—
—
1000
5000
4.00
(102)
6.00
(152)
—
—
250
2500
120
(534)
—
—
100
500
Bulk
Ctn.
Qty.
MINIATURE CROSS SECTION
ILT1M-M‡
4.8
(122)
.098
(2.5)
INTERMEDIATE CROSS SECTION
ILT1.5I-M‡
5.4
(137)
.142
(3.6)
STANDARD CROSS SECTION
ILT2S-M‡
ILT3S-M‡
ILT4S-M‡
8.3
(211)
11.5
(292)
14.7
(373)
.190
(4.8)
.052
(1.3)
.140
(3.6)
LIGHT-HEAVY CROSS SECTION
ILT4LH-TL‡
ILT6LH-C‡
.
14.8
(376)
21.2
(538)
.300
(7.6)
.075
(1.9)
.250
(6.4)
*Order the number of pieces required in multiples of package quantities.
For colors and other materials, see page 39.
All part numbers shown in standard package quantities unless denoted by ‡.
.475
(12.1)
GTH, GS4H
or PPTEH
Most commonly used parts appear in BOLD.
37
IN-LINE Nylon 6.6 Cable Ties
IN-LINE Weather Resistant
Nylon 6.6 Cable Ties
• Wide tie body and high tensile strength are
ideal for any application including
playground equipment
• For playground installations, the head is
inverted and the body is captured between the
tie and foam for safety
• Flexible, easy to handle and easily installed
without special tools
• Available in 13 UV weather resistant colors for
color coordination and UV stability
B
Colors can be used to install foam
padding for playground applications.
UV Black can be used in any
outdoor application.
E
A REF.
C
D
Part Number
Description
Length
Width Thickness
A
B
C
in. (mm) in. (mm) in. (mm)
Head
Height
D
in. (mm)
Head
Width
E
in. (mm)
Max.
Bundle
Dia.
in. (mm)
Min. Loop
Tensile
Strength
Lbs. (N)
Packaging*
Std.
Pkg.
Qty.
Std.
Ctn.
Qty.
Bulk
Pkg.
Qty.*
Bulk
Ctn.
Qty.*
Cable Tie Colors
IT9100-CUV2‡
UV Red
—
—
100
1000
IT9100-CUV4‡
UV Yellow
—
—
100
1000
IT9100-CUV4A‡
UV Butterscotch
—
—
100
1000
IT9100-CUV5A‡
UV Green
—
—
100
1000
IT9100-CUV5B‡
UV Hunter Green
—
—
100
1000
IT9100-CUV6‡
UV Dark Blue
—
—
100
1000
IT9100-CUV6A‡
UV Light Blue
—
—
100
1000
IT9100-CUV6B ‡
UV Cobalt Blue
—
—
100
1000
IT9100-CUV7A‡
UV Purple
—
—
100
1000
IT9100-CUV8‡
UV Silver
—
—
100
1000
IT9100-CUV11‡
UV Teal
—
—
100
1000
IT9100-CUV16B ‡
UV Pink
—
—
100
1000
IT9115-CUV2‡
UV Red
—
—
100
1000
IT9115-CUV4‡
UV Yellow
—
—
100
1000
IT9115-CUV4A ‡
UV Butterscotch
—
—
100
1000
IT9115-CUV5A‡
UV Green
—
—
100
1000
IT9115-CUV5B‡
UV Hunter Green
—
—
100
1000
IT9115-CUV6‡
UV Dark Blue
—
—
100
1000
IT9115-CUV6A‡
UV Light Blue
—
—
100
1000
IT9115-CUV6B‡
UV Cobalt Blue
—
—
100
1000
IT9115-CUV7A‡
UV Purple
—
—
100
1000
IT9115-CUV8‡
UV Silver
—
—
100
1000
IT9115-CUV11‡
UV Teal
—
—
100
1000
IT9115-CUV16B‡
UV Pink
—
—
100
1000
1.57
(40)
—
—
100
1000
2.58
(65)
—
—
100
1000
—
—
100
1000
—
—
100
1000
5.91
(150)
—
—
100
1000
9.84
(250)
—
—
100
1000
14.1
(358)
15.3
(389)
.350
(8.9)
.350
(8.9)
.065
(1.7)
.065
(1.7)
.300
(7.6)
.300
(7.6)
.556
(14.1)
.556
(14.1)
3.94
(100)
4.53
(115)
124
(550)
124
(550)
Black Cable Ties
IT940-C0‡
UV Black
6.8
(173)
IT965-C0‡
UV Black
10.1
(257)
IT9100-C0‡
UV Black
14.1
(358)
IT9115-C0‡
UV Black
15.3
(388)
IT9150-C0‡
UV Black
20.1
(511)
IT9250-C0‡
38
UV Black
33.0
(838)
Most commonly used parts appear in BOLD.
.065
(1.7)
.300
(7.6)
.350
(8.9)
.556
(14.1)
.075
(1.9)
.320
(8.1)
3.94
(100)
4.53
(115)
124
(550)
*Order the number of pieces required in multiples of package quantities.
For colors and other materials, see page 39.
All part numbers shown in standard package quantities unless denoted by ‡.
Part Number Suffix Code for All Parallel Entry Cable Ties
Part Number System (Example of ILT1M-M)
LT
—
Part Description:
CBR = CON TOU R-TY ®
ILT = BELT -TY ™ In-Line Tie
IT = In-Line Tie
Size:
Approximate
Maximum Bundle
Diameter in
Inches
Package Size:
C = 100
TL = 250
D = 500
M = 1000
Cross Section:
M = Miniature
I = Intermediate
S = Standard
HS = Heavy-Standard
LH = Light-Heavy
Color:
See Material/Color
chart. Not all ties
available in all colors.
Material/Color Chart
Material/Color
Nylon 6.6 — Natural (See Note)
Weather Resistant Nylon 6.6 —
Black
PANDUIT ® Mil Spec
Suffix*
Suffix**
✔
9
0
N/A
Ultraviolet Red
Ultraviolet Yellow
Ultraviolet Butterscotch
Ultraviolet Green
Ultraviolet Hunter Green
UV2
UV4
UV4A
UV5A
UV5B
N/A
N/A
N/A
N/A
N/A
Material/Color
Ultraviolet Dark Blue
Ultraviolet Light Blue
Ultraviolet Cobalt Blue
Ultraviolet Purple
Ultraviolet Silver
Ultraviolet Teal
Ultraviolet Pink
Ultraviolet Tan
PANDUIT ® Mil Spec
Suffix**
Suffix*
UV6
N/A
UV6A
N/A
UV6B
N/A
UV7A
N/A
UV8
N/A
UV11
N/A
UV16B
N/A
UV18
N/A
* NOTE: ✔ designates PANDUIT ® standard Natural Nylon 6.6 color.material. No suffix required in part number.
** NOTE: MIL SPEC Color (suffix) per AS33671 (Formerly MS3367) and SAE AS33681 (Formerly MS3368).
Part
Number
ILT2S-C
ILT3S-C
ILT4S-C
Standard Packaging
Natural
Available Color/
Nylon 6.6
Material (Suffix)
✔
✔
✔
0
0
0
Part
Number
CBR1M-M
CBR1.5M-M
CBR2M-M
CBR1.5I-M
CBR3I-M
CBR4I-M
CBR2S-M
CBR3S-M
CBR4S-M
CBR2HS-D
CBR4LH-TL
CBR6LH-C
ILT1M-M
ILT1.5I-M
ILT2S-M
ILT3S-M
ILT4S-M
ILT4LH-TL
ILT6LH-C
IT940-C
IT965-C
IT9100-C
IT9115-C
IT9150-C
IT9250-C
Bulk Packaging
Natural
Available Color/
Nylon 6.6
Material (Suffix)
✔
0
✔
0
✔
0
✔
0
✔
0
✔
0
✔
0, 39
✔
0
✔
0
✔
0
✔
0
✔
0
✔
0
✔
0
✔
0
✔
0
✔
0
✔
0
✔
0
0
0
0, UV2, UV4, UV6, UV6A,
UV7A, UV8, UV16B
0, UV2, UV4, UV4A, UV5A,
UV5B, UV6, UV6A, UV6B,
UV7A, UV8, UV11, UV16B,
UV18
0
0
Most commonly used parts appear in BOLD.
39
TAK -TY ® Hook & Loop Cable Ties
TAK-TY ® Hook & Loop
Cable Ties
• Releasable and reusable
hundreds of times
• No risk of over tensioning
and damaging high
performance cabling
• No installation tool needed
• No waste — excess can be
wrapped around bundle
• Cinch ties — Pass hook
portion through plastic cinch
ring. Pull end of tie against
ring to tension. Secure hook
portion against loop portion
of tie body to fasten
• Loop and Strip ties have
hooks on one side and
loops on the other, so it
adheres to itself; wrap
around bundle and secure
end of tie on the body
• HLM-15R can be used with
ABM3H-A-L, ABM4H-A-L,
TM3S8-C, TM3S10-C and
TM3S25-C mounts
• Loop and Strip ties (in black
and maroon) are UL Listed
for use in air handling
spaces per NEC section
300-22 (c) and (d) and are
UL94V-2 flame rated
HLC Series
HLS/HLSP/HLM Series
CINCH TIES — CINCH RING PROVIDES EXTRA STRENGTH AND BUNDLE TIGHTNESS
Length Width
Part Number in. (mm) in. (mm)
HLC3S-X0
12.0
(305)
.750
(19.1)
HLC5S-X0
18.0
(457)
Thickness
in. (mm)
Head
Width
in. (mm)
.10
(2.5)
1.10
(27.9)
Min.
Bundle
Dia.
in. (mm)
2.00
(51)
3.00
(76)
Max.
Bundle
Dia.
in. (mm)
3.00
(76)
5.00
(127)
Min. Loop
Tensile
Strength*
Lbs. (N)
50
(222)
Packaging**
Std.
Pkg.
Qty.
Std.
Ctn.
Qty.
10
100
10
100
LOOP TIES — SLOT ALLOWS FOR PRE-WRAPPING OF BUNDLES
Length Width
Part Number in. (mm) in. (mm)
HLT2I-X0
8.0
(203)
.50
(12.7)
HLT3I-X0
12.0
(305)
Thickness
in. (mm)
Head
Width
in. (mm)
.10
(2.5)
1.00
(25.4)
Min.
Bundle
Dia.
in. (mm)
.25
(6)
.25
(6)
Max.
Bundle
Dia.
in. (mm)
1.91
(49)
3.18
(81)
.25
(6)
.25
(6)
1.91
(49)
3.18
(81)
Min. Loop
Tensile
Strength*
Lbs. (N)
40
(178)
Packaging**
Std.
Pkg.
Qty.
10
Std.
Ctn.
Qty.
100
10
100
10
100
10
100
UL LISTED LOOP TIES ** — LARGER
HLTP2I-X12
8.0
(203)
12.0
(305)
HLTP3I-X12
.50
(12.7)
.10
(2.5)
1.00
(25.4)
40
(178)
STRIP TIES — ROLLS PERFORATED IN CONVENIENT 6", 12" AND 18" STRIPS
Length
in.
(mm)
6.0
(152)
12.0
(305)
18.0
(457)
Part Number
HLS1.5S-X0
HLS3S-X0
HLTP/HLSP Only
HLT/HLTP Series
HLS5S-X0
Width
in.
(mm)
Thickness
in. (mm)
.750
(19.1)
.10
(2.5)
Head
Width
in. (mm)
—
Min.
Bundle
Dia.
in. (mm)
.25
(6)
Max.
Bundle
Dia.
in. (mm)
1.50
(38)
3.20
(81)
5.00
(127)
Min. Loop
Tensile
Strength*
Lbs. (N)
50
(222)
Packaging**
Std.
Pkg.
Qty.
10
Std.
Ctn.
Qty.
100
10
100
10
100
10
100
10
100
10
100
UL LISTED STRIP TIES ** — LARGER
Color Chart
Color
Part
Number
Suffix
Example
Black
0
HLT2I-X0
Red
2
HLT2I-X2
Orange
3
HLT2I-X3
Yellow
4
HLT2I-X4
Green
5
HLT2I-X5
Blue
6
HLT2I-X6
Gray
8
HLT2I-X8
White
10
HLT2I-X10
Maroon
12
HLTP2I-X12
HLSP1.5S-X12
6.0
(152)
HLSP3S-X12
12.0
(305)
18.0
(457)
HLSP5S-X12
.750
(19.1)
.10
(2.5)
—
.25
(6)
1.50
(38)
3.20
(81)
5.00
(127)
50
(222)
15' & 75' ROLLS — CAN BE CUT TO DESIRED LENGTH, ELIMINATING WASTE
Part Number
Length Width
in. (mm) in. (mm)
HLM-15R0
180.0
(4572)
.33
(8.4)
HLS-15R0
180.0
(4572)
.750
(19.1)
900.0
(22,860)
.750
(19.1)
HLS-75R0
Thickness
in. (mm)
Head
Width
in. (mm)
Min.
Bundle
Dia.
in. (mm)
Max.
Bundle
Dia.
in. (mm)
Min. Loop
Tensile
Strength*
Lbs. (N)
18
(80)
.10
(2.5)
—
.25
(6)
Various
50
(222)
Packaging**
Std.
Pkg.
Qty.
Std.
Ctn.
Qty.
1
10
1
10
1
10
*Minimum 2" overlap required to achieve loop tensile rating (HLC, HLT, HLS, HLM series).
**Available in -0 (Black) rated 18lbs. (80N).
40
Most commonly used parts appear in BOLD.
**Order the number of pieces required in multiples of package quantities.
For colors and other materials, see page 42 .
All part numbers shown in standard package quantities unless denoted by ‡.
TAK -TY ® Hook & Loop Grommet Cinch Ties
TAK-TY ® Hook & Loop
Grommet Cinch Ties
Part Number
• Sturdy brass grommet and washer provides strength and high
visibility for mounting in poor lighting conditions
• 1/4" (M6) diameter mounting hole fits drywall screws up to
#12 screw size
• Grommet allows for mounting of the cinch ties prior to cable
installation for easier handling of cable bundles with tie
pre-positioned and anchored
• No sharp edges to damage cables
• Releasable and Reusable
Length
Width Thickness
in. (mm) in. (mm) in. (mm)
Head
Width
in. (mm)
Max.
Bundle
Dia.
in. (mm)
Min. Loop
Tensile
Strength
Lbs. (N)*
Packaging**
Std.
Pkg.
Qty.**
Std.
Ctn.
Qty.**
Bulk
Pkg.
Qty.
Bulk
Ctn.
Qty.
GCTC SERIES — GROMMET CINCH TIE CENTER MOUNT (Centers bundle over mounting point)
GCTC3S-X0
GCTC5S-X0
12.0
(305)
18.0
(457)
.750
(19.1)
.10
(2.5)
1.10
(27.9)
3.00
(76.2)
30
(133)
10
100
—
—
5.00
(127)
50
(222)
10
100
—
—
GCTE SERIES — GROMMET CINCH TIE END MOUNT (Offsets bundle next to mounting point)
GCTE2S-X0
GCTE4S-X0
10.5
(267)
16.5
(419)
.750
(19.1)
.10
(2.5)
1.10
(27.9)
2.20
(55.8)
4.10
(104.1)
50
(222)
10
100
—
—
10
100
—
—
*Tensile Strength achieved with 2" overlap.
**Order the number of pieces required in multiples of package quantities.
All part numbers shown in standard package quantities unless denoted by ‡.
Most commonly used parts appear in BOLD.
41
Part Number Suffix Codes for All Hook & Loop Cable Ties
Part Number System (Example of HLC3S-X0)
LC
Part Description:
HL = Hook & Loop
HLC = H&L Cinch Tie
HLT = H&L Tie
HLTP* = H&L Tie Plenum
HLS = H&L Strip
HLSP* = H&L Strip Plenum
HLM = H&L Strip Miniature
GCT = Grommet Cinch Tie
S
Size:
Approximate
Maximum
Bundle
Diameter in
Inches
—
Cross Section:
I = Intermediate
S = Standard
Package Size:
X = 10
15R = 15' Roll
75R = 75' Roll
Color:
See Material/
Color chart. Not
all ties available in
all colors.
Material/Color Chart
Color
Black
Red
Orange
Yellow
Green
Part
Number
GCTC3S-X
GCTC5S-X
GCTE2S-X
GCTE4S-X
HLC3S-X
HLC5S-X
HLM-15R
HLS-15R
HLS-75R
HLS1.5S-X
HLS3S-X
HLS5S-X
HLT2I-X
HLT3I-X
*HLSP1.5S-X
*HLSP3S-X
*HLSP5S-X
*HLTP2I-X
*HLTP3I-X
PANDUIT ®
Suffix
0
2
3
4
5
Color
Blue
Gray
White
Maroon
Standard Packaging
Available Color/
Material (Suffix)
0
0
0
0
0
0
0, 2, 3, 4, 5, 6, 8, 10
0, 2, 3, 4, 5, 6, 8, 10
0, 2, 3, 4, 5, 6, 8, 10
0, 2, 3, 4, 5, 6, 8, 10
0, 2, 3, 4, 5, 6, 8, 10
0, 2, 3, 4, 5, 6, 8, 10
0, 2, 3, 4, 5, 6, 8, 10
0, 2, 3, 4, 5, 6, 8, 10
0,12
0,12
0,12
0,12
0,12
*HLSP and HLTP are unique Hook & Loop style ties that are UL Listed for use in air-handling spaces
per NEC section 300-22 (c) and (d) and are UL94V-2 flame rated. Available in Black (-X0) and
Maroon (-X12).
42
Most commonly used parts appear in BOLD.
PANDUIT ®
Suffix
6
8
10
12
STA-STRAP ® Cable Ties (SSC/SST Series)
STA-STRAP ® Nylon 6.6
Cable Ties
• STA -STRAP ® Cable Ties — Use for normal bundling and
through-panel applications
• STA -STRAP ® Clamp Ties — Only clamp that can be pre-mounted
before tying bundle
• Low profile head for use in compact areas
• Two piece design provides low thread force to reduce installer fatigue
• Lower weight than comparable one-piece ties
• Releasable (prior to final tensioning and cut-off) —
Helpful in assembly
SSC Series
B
E
E
A
C
D
ALTERNATE HEAD
DESIGN - SSC2S ONLY
SST Series
B
E
A
C
D
STA-STRAP ® Clamp Head Cable Ties — SSC Series
Part Number
Boss
Width Thickness Height
Length
A
B
C
D
in. (mm) in. (mm) in. (mm) in. (mm)
Boss
Max.
Width Bundle
E
Dia.
in. (mm) in. (mm)
Min. Loop
Tensile
Strength
Lbs. (N)
Screw
Size
Packaging*
Recommended
PANDUIT ®
Installation
Tool Part No.
Std.
Pkg.
Qty.
Std.
Ctn.
Qty.
Bulk
Pkg.
Qty.
Bulk
Ctn.
Qty.
STANDARD CROSS SECTION
SSC2S-S10-C
7.4
(187)
.180
(4.6)
.045
(1.2)
.310
(7.9)
.430
(10.9)
1.75
(45)
50
(222)
#10
(M5)
GTS, GS2B, GTH,
GS4H, PTS
or PPTS
100
100
1000
1000
.065
(1.5)
.460
(11.7)
.53
(13.5)
4.00
(102)
120
(534)
1/4
(M6)
GTH, GS4H,
GS4EH or PPTEH
50
500
500
2500
HEAVY CROSS SECTION
SSC4H-S25-L
15.6
(395)
.300
(7.6)
STA-STRAP ® Cable Ties — SST Series
Part Number
Length
A
in. (mm)
Width
Thickness
C
B
in. (mm) in. (mm)
Head
Height
D
in. (mm)
Head
Width
E
in. (mm)
.150
(3.8)
.175
(4.5)
Max.
Bundle
Dia.
in. (mm)
Min. Loop
Tensile
Strength
Lbs. (N)
Recommended
PANDUIT ®
Installation
Tool Part No.
18
(80)
GTS, GS2B,
PTS or PPTS
Packaging*
Std.
Pkg.
Qty.
Std.
Ctn.
Qty.
Bulk
Pkg.
Qty.
Bulk
Ctn.
Qty.
100
1000
1000
50000
100
1000
1000
50000
100
1000
1000
25000
100
1000
1000
25000
3.00
(76)
100
1000
1000
10000
1.75
(45)
100
1000
1000
15000
100
1000
1000
10000
100
1000
1000
5000
—
—
500
2500
—
—
500
2000
MINIATURE CROSS SECTION
SST1M-C
SST1.5M-C
4.0
(102)
5.5
(140)
.095
(2.4)
.035
(.9)
.037
(.9)
.78
(20)
1.25
(32)
INTERMEDIATE CROSS SECTION
SST1.5I-C
5.3
(137)
SST2I-C
8.1
(206)
SST3I-C
.037
(.9)
.135
(3.4)
11.0
(279)
.040
(1.0)
1.25
(32)
.210
(5.3)
.240
(6.1)
2.00
(50)
40
(178)
GTS, GS2B,
PTS or PPTS
STANDARD CROSS SECTION
SST2S-C
SST3S-C
SST4S-C
6.7
(172)
11.0
(279)
.045
(1.2)
.180
(4.6)
15.0
(381)
.048
(1.2)
.250
(6.4)
.310
(7.9)
.253
(6.4)
.350
(8.9)
.325
(8.3)
.460
(11.7)
3.00
(76)
50
(222)
GTS, GS2B, GTH,
GS4H, PTS, PPTS,
STS2 or STH2
4.00
(102)
HEAVY CROSS SECTION
SST4H-D‡
SST8H-D‡
14.8
(376)
27.5
(699)
.300
(7.6)
.067
(1.7)
*Order the number of pieces required in multiples of package quantities.
For colors and other materials, see page 45.
All part numbers shown in standard package quantities unless denoted by ‡.
4.00
(102)
8.00
(203)
120
(534)
GTH, GS4H,
GS4EH or PPTEH
Most commonly used parts appear in BOLD.
43
STA-STRAP ® Cable Ties (SSPM Series)
Three Easy Steps...
STA -STRAP ® Chassis/Panel Mount Tie —
Weather Resistant Heat Stabilized Nylon 6.6
1
Insert tip end of STA-STRAP ® cable tie
through the correct size pre-drilled hole
in the panel.
Applications:
• Run cable and hose along
truck frame rails
• Secure a bundle under a
chassis assembly
• Manage wire harnesses in
the cab and sleeper
• Use a through-hole in
frame/chassis to mount
2
Wrap cable tie around the bundle
and insert the tip end back through
the hole and head of the cable tie.
3
Solution:
PANDUIT ® STA -STRAP ® Chassis Mount Ties are uniquely designed to secure a bundle directly to a chassis or panel utilizing
a through-hole.
Pull tip end until STA-STRAP ® cable tie
is snug on bundle. Tension and cut off
excess portion with PANDUIT ® cable
tie installation tool.
Features:
• Eliminates the need for separate fasteners to reduce costs
and decrease installation time
• Remains adjustable and releasable until tie is tensioned
and cut-off
• Installs easily with PANDUIT ® hand-operated tools
• Engages clearance hole with optional centering pilot
(2 designs) to prevent tie from shifting or abrading during
vehicle operation
B
• Optional Long
Centering Pilot
• Pilot ears protect
strap body
from clearance
hole edges
A REF.
OPTICAL CENTERING PILOT
To ensure coverage of hole up to .70" (18mm)
C
Without Pilot
With Pilot
D
With Long
Centering Pilot
HEAVY CROSS SECTION
Part Number
D
A
B
C
Head
Length
Width Thickness Height
in. (mm) in. (mm) in. (mm) in. (mm)
Recommended
Panel Hole
Dia.
in. (mm)
Maximum
Bundle
Diameter
in. (mm)
Min. Loop
Tensile
Strength
Lbs. (N)
Recommended
PANDUIT ®
Installation Tool
Part No.
Packaging*
Std.
Pkg.
Qty.
Std.
Ctn.
Qty.
Bulk
Pkg.
Qty.
Bulk
Ctn.
Qty.
50
2500
250
2500
50
2500
250
2500
50
2500
250
2500
50
2500
250
2500
—
—
250
2500
WITHOUT PILOT
SSPM2.5H-L300
SSPM4H-L300
10.1
(257)
14.8
(376)
.30
(7.6)
.062
(1.6)
.248
(6.3)
.316 to.820
(8.0 to 21)
2.76
(70)
4.00
(102)
120
(534)
GTH, GS4H,
GS4EH, PPTEH,
STH2
or ST2EH
10.1
(257)
14.8
(376)
.30
(7.6)
.062
(1.6)
.248
(6.3)
.440 to.820
(11.2 to 21)
2.76
(70)
4.00
(102)
120
(534)
GTH, GS4H,
GS4EH, PPTEH,
STH2
or ST2EH
.062
(1.6)
.248
(6.3)
.440 to.820
(11.2 to 21)
4.00
(102)
120
(534)
WITH PILOT
SSPM2.5HP-L300
SSPM4HP-L300
WITH LONG CENTERING PILOT
SSPM4HLP-TL300‡
44
14.8
(376)
.30
(7.6)
Most commonly used parts appear in BOLD.
GTH, GS4H,
GS4EH,
PPTEH, STH2
or ST2EH
*Order the number of pieces required in multiples of package quantities.
All part numbers shown in standard package quantities unless denoted by ‡.
Part Number Suffix Codes for All STA-STRAP ® Cable Ties
Part Number System (Example of SST1M-C)
SST
C
—
Part Description:
SST = STA-STRAP ® Tie
SSC = STA-STRAP ® Clamp
SSPM = STA-STRAP ® Panel Mount
SSB = STA-STRAP ® Bow-Ty
SSM = STA -STRAP ® Marker
Size:
Approximate
Maximum Bundle
Diameter in
Inches
Cross Section:
M = Miniature
I = Intermediate
S = Standard
LH = Light-Heavy
H = Heavy
HH = Heavy Head
Screw Hole Size:
(Clamp Ties Only)
-S6 = #6 (M3)
-S10 = #10 (M5)
-S25 = 1/4 (M6)
Package Size:
L = 50
C =100
TL = 250
D = 500
M = 1000
Color:
See
Material/
Color chart.
Not all ties
available in
all colors.
Material/Color Chart
Material/Color
Nylon 6.6 — Natural (see note)
Weather Resistant Nylon 6.6 —
Black
Nylon 6.6 — Black
PANDUIT ® Mil Spec
Suffix**
Suffix*
✔
9
0
N/A
20
PANDUIT ® Mil Spec
Suffix**
Suffix*
30
N/A
300
N/A
Material/Color
Heat Stabilized Nylon 6.6 — Black
Heat Stabilized Weather Resistant
Nylon 6.6 — Black
N/A
*NOTE: ✔ designates PANDUIT standard Natural Nylon 6.6 color.material. No suffix required in part number.
**NOTE: MIL SPEC Color (suffix) per AS33671 (Formerly MS3367) and SAE AS33681 (Formerly MS3368).
®
Part
Number
SSPM2.5H-L
SSPM2.5HP-L
SSPM4H-L
SSPM4HP-L
Standard Packaging
Natural
Nylon
Available Color/
6.6
Material (Suffix)
300
300
300
300
SSC2S-S10-C
SSC2S-S6-C
SSC4S-S10-C
SSC4H-S25-L
SSM2S-C
✔
✔
✔
✔
✔
SST1M-C
SST1.5M-C
SST1.5I-C
SST2I-C
SST3I-C
SST4I-C
✔
✔
✔
✔
✔
✔
0
SST2S-C
SST3S-C
SST4S-C
✔
✔
✔
0
0
0
SST4H-L
✔
0
SST8H-L
SSB2S-C
✔
✔
0
0
Bulk Packaging
Part
Number
SSPM2.5H-TL
SSPM2.5HP-TL
SSPM4H-TL
SSPM4HP-TL
SSPM4HLP-TL
SSC2S-S10-M
SSC2S-S6-M
SSC4S-S10-M
SSC4H-S25-D
SSM2S-D
SSM4S-D
SST1M-M
SST1.5M-M
SST1.5I-M
SST2I-M
SST3I-M
SST4I-M
SST1.5S-M
SST2S-M
SST3S-M
SST4S-M
SST2H-D
SST4H-D
SST4HH-D
SST8H-D
SSB2S-M
Natural
Nylon 6.6
✔
✔
✔
✔
✔
✔
✔
✔
✔
✔
✔
✔
✔
✔
✔
✔
✔
✔
✔
✔
Available Color/
Material (Suffix)
300
300
300
300
300
0, 30
0
0
0
0
0, 20, 30
0, 20, 30
0
0, 20
0
0
0
0, 20, 30
0, 20, 30
0, 2, 30
0
0, 30
30
0, 30
0, 30
Most commonly used parts appear in BOLD.
45
Specialty Ties
PANDUIT ® Stud
Mounted Heat
Stabilized Nylon 6.6
Cable Ties
Base portion pushes onto a threaded stud and the tie portion wraps
around the bundle. The wire bundle is centered over the stud.
B
A REF.
C
D
Except PLST4H
Part Number
Thickness
C
in. (mm)
Head
Height
D
in. (mm)
Recommended
Stud Size
in. (mm)
.19
(4.8)
.050
(1.3)
.41
(10.5)
10-24
(5)
.300
(7.6)
.075
(1.9)
.265
(6.7)
1/4-20
(6)
Length
Width
A
B
in. (mm) in. (mm)
Max.
Bundle
Dia.
in. (mm)
Min. Loop
Tensile
Strength
Lbs. (N)
Recommended
PANDUIT ®
Installation
Tool Part No.
50
(222)
GTS, GS2B
GTH, GS4H,
PTS, PPTS,
STS2 or STH2
Packaging*
Std.
Pkg.
Qty.
Std.
Ctn.
Qty.
Bulk
Pkg.
Qty.
Bulk
Ctn.
Qty.
—
—
500
5000
—
—
500
5000
—
—
250
2500
STANDARD CROSS SECTION
PLST30SC-D30‡
PLST50SC-D30‡
5.74
(146)
8.14
(207)
1.18
(30)
1.97
(50)
HEAVY CROSS SECTION
PLST4HS25-TL300‡
15.3
(389)
Ladder Style Stud
Mounted Cable Tie
Heat Stabilized
Nylon 6.6
4.00
(102.1)
120
(534)
GTH, GS4H,
GS4EH or
PPTEH
The ties can be removed from the stud by turning counterclockwise.
Adjustable and releasable.
B
A REF.
C
D
Part Number
Length
Width Thickness
A
B
C
in. (mm) in. (mm) in. (mm)
Head
Height
D
in. (mm)
Recommended
Stud Size
in. (mm)
Max.
Bundle
Dia.
in. (mm)
Min. Loop
Tensile
Strength
Lbs. (N)
Recommended
PANDUIT ®
Installation
Tool Part No.
.59
(15)
10-24
(5)
1.18
(30)
35
(156)
Hand Installed
Only
Packaging*
Std.
Pkg.
Qty.
Std.
Ctn.
Qty.
Bulk
Pkg.
Qty.
Bulk
Ctn.
Qty.
—
—
1000
10000
STANDARD CROSS SECTION
PRST30S-S14-M30‡
46
5.2
(132)
.38
(9.7)
.050
(1.3)
Most commonly used parts appear in BOLD.
*Order the number of pieces required in multiples of package quantities.
For colors and other materials, see page 50.
All part numbers shown in standard package quantities unless denoted by ‡.
Specialty Ties
Applications:
• Underhood hose and harness routing
• Areas where bundles must be secured parallel to each other or
another element
Solution
Looking for a labor saving alternative to cushioned clamps when securing hoses
and wire bundles? PANDUIT ® Multiple Loop Cable Ties are the perfect solution.
PANDUIT ® Multiple
Loop Cable Ties —
Nylon 6.6
Features and Benefits:
• Offers multiple loop capability
• Prevents bundle damage with a wire strap body that spreads the
clamping forces
• Provides high tensile strength to route bundles securely
• Installs easily by hand — use PANDUIT ® tooling for repeatable tension
and cut-off
• Reduces part number inventory with a single product to cover multiple
bundle sizes
B
E
A
Except PLB4H-0
D2 REF.
D1 REF.
F
C
D
Max.
Combined
Bundle dia. Length
Width Thickness
D1 & D2
A
B
C
Part Number
in. (mm)
in. (mm) in. (mm) in. (mm)
Packaging*
Head
Height
D
in. (mm)
Head
Width
E
in. (mm)
Head
Length
F
in. (mm)
Min. Loop Recommended
Tensile
PANDUIT ®
Installation
Strength
Tool Part No.
Lbs. (N)
Std.
Pkg.
Qty.
Std.
Ctn.
Qty.
Bulk
Pkg.
Qty.
Bulk
Ctn.
Qty.
100
1000
1000
10000
100
1000
1000
10000
100
1000
1000
5000
—
—
250
2500
—
—
250
2500
STANDARD CROSS SECTION
PLB2S-C
PLB3S-C
PLB4S-C
1.8
(46)
7.6
(193)
3.0
(76)
11.8
(300)
4.1
(104)
14.8
(376)
.320
(8.1)
.19
(4.8)
.052
(1.3)
.220
(5.6)
.465
(11.8)
.337
(8.6)
GTS, GS2B.
GTH, GS4H,
PTS, PPTS,
STS2 or STH2
50
(222)
HEAVY CROSS SECTION
PLB4H-TL‡
PLB4H-TL0‡
3.6
(91)
14.7
(373)
.300
(7.6)
.075
(1.9)
.322
(8.2)
.490
(12.4)
1.1
(27.9)
GTH, GS4H,
GS4EH,
or PPTEH
120
(534)
PANDUIT ® Multiple Loop Cable Ties —
Weather Resistant Nylon 6.6
B
E
D3
D2
A
D1
C
D
F
Part Number
Max.
Combined
Head
Bundle Dia. Length
Width Thickness Height
D1, D2 & D3
B
A
C
D
in. (mm) in. (mm) in. (mm) in. (mm)
in. (mm)
Head
Head
Width
Length
E
F
in. (mm) in. (mm)
Packaging*
Min. Loop
Tensile
Strength
Lbs.
(N)
Recommended
PANDUIT ®
Installation
Tool Part No.
125
(556)
GS4EH or
PPTEH
Std.
Pkg.
Qty.
Std.
Ctn.
Qty.
Bulk
Pkg.
Qty.
Bulk
Ctn.
Qty.
—
—
100
1000
EXTRA-HEAVY CROSS SECTION
PL3B5EH-C0‡
5.0
(127)
20.0
(508)
.500
(12.7)
.075
(1.9)
*Order the number of pieces required in multiples of package quantities.
For colors and other materials, see page 50.
All part numbers shown in standard package quantities unless denoted by ‡.
.400
(10.2)
.800
(20.3)
1.8
(45.7)
Most commonly used parts appear in BOLD.
47
Specialty Ties
Double Hose Clamp
Weather Resistant
Nylon 6.6
The Double Hose Clamp can be used on gasoline, hydraulic or
pneumatic hoses. It holds each hose individually to prevent abrasion
and holds them together to prevent twisting.
B
E
FIXED LOOP
ADJUSTABLE LOOP
A REF.
C
D
Part Number
DHC1.12x1.75-D0
Length
Width
A
B
in. (mm) in. (mm)
11.0
(279)
.28
(7.1)
Loop Diameters
Thickness
C
in. (mm)
Head
Height
D
in. (mm)
Head
Width
E
in. (mm)
Fixed
Loop
in. (mm)
Adjustable
Loop
in. (mm)
Min. Loop
Tensile
Strength
Lbs. (N)
.050
(1.3)
.31
(7.9)
.44
(11.2)
1.12
(28.4)
1.0 to 1.75
(25 to 44)
100
(445)
Recommended
Std.
PANDUIT ®
Installation
Pkg.
Tool Part No.
Qty.
GTH, GS4H,
STH2 or ST2EH
Packaging*
Std.
Ctn.
Qty.
Bulk
Pkg.
Qty.
Bulk
Ctn.
Qty.
—
500
2500
—
Curved tip up
GS4H
1. Wrap clamp around hose.
48
2. Position second hose in clamp.
Most commonly used parts appear in BOLD.
3. Loop tail around second hose
and thread tail through both
spacer heads.
4. Tension and cut off with
PANDUIT ® tool.
*Order the number of pieces required in multiples of package quantities.
For colors and other materials, see page 50.
All part numbers shown in standard package quantities unless denoted by ‡.
Specialty Ties
Polyethylene
Cable Marker Strap
For identifying telephone and fiber optic cable. Replaces costly and
cumbersome lead marking tags. Lightweight and easy-to-install.
Can be used as wrap-around or “flag” marker. Can also be used in
underground identification applications. Custom hot stamping is
available (see page 52).
.75
(19.1)
1.50
(38.1)
3.88
(98.5)
15.25
(387.4)
.033
(.84)
Loop Excess
Thru Slot
Unique design allows
strap to be used as:
Part Number
Color
Marking
Area
in. (mm,)
Max.
Bundle
Dia.
in. (mm)
Recommended
PANDUIT ®
Installation
Tool Part No.
1.50 x 2.62
(38.1 x 66.5)
4.38
(111)
Hand Installed Only
Packaging*
Std.
Pkg.
Qty.
Std.
Ctn.
Qty.
50
500
50
500
STANDARD CROSS SECTION
CM4S-L2
Red
CM4S-L8
Gray
*Order the number of pieces required in multiples of package quantities.
For colors and other materials, see page 50.
All part numbers shown in standard package quantities unless denoted by ‡.
WRAP-AROUND
MARKER
(Min. Dia.: 1.27")
“FLAG” MARKER
(Min. Dia.: 25")
Most commonly used parts appear in BOLD.
49
Part Number Suffix Codes for All PANDUIT ® Specialty Cable Ties
Part Number System (Example of PLST4HS25-TL)
PLST
S2
Size:
Approximate
Maximum Bundle
Diameter in Inches
Part Description:
CM4S = Cable Marker Strap
DHC = Double Hose Clamp
PLST = Lock. Stud Mounted
PLB = Locking Bow Tie
PRST = Releas. Stud Mounted
(Ladder Style)
Cross Section:
S = Standard
H = Heavy
EH = Extra-Heavy
—
Stud Size:
-S25 = 1/4" (M6)
-SC = .20" (5mm)
TL
Package Size:
L = 50
C = 100
TL = 250
D = 500
Color:
See Material/
Color chart. Not
all ties available
in all colors.
Material/Color Chart
Material/Color
Natural Nylon 6.6 (See Note)
Weather Resistant Nylon 6.6
Nylon 6.6 — Red
PANDUIT ® Mil Spec
Suffix*
Suffix**
✔
9
0
N/A
2
2
PANDUIT ® Mil Spec
Suffix**
Suffix*
8
8
30
N/A
300
N/A
Material/Color
Nylon 6.6 — Gray
Heat Stabilized Black Nylon 6.6
Heat Stabilized Weather Resistant
Nylon 6.6
*NOTE: ✔ designates PANDUIT ® standard Natural Nylon 6.6 color/material. No suffix required in part number.
**NOTE: MIL SPEC Color (suffix) per AS33671 (Formerly MS3367) and SAE AS33681 (Formerly MS3368).
Part
Number
CM4S-L
PLB2S-C
PLB3S-C
PLB4S-C
50
Standard Packaging
Natural
Available Color/
Nylon 6.6
Material (Suffix)
2, 8
✔
✔
✔
0
0
Most commonly used parts appear in BOLD.
Part
Number
DHC1.12X1.75-D
PLB2S-M
PLB3S-M
PLB4S-M
PLB4H-TL
PL3B5EH-C
PLST4HS25-TL
PLST30SC-D
PLST50SC-D
PRST40SC-D
Bulk Packaging
Natural
Available Color/
Nylon 6.6
Material (Suffix)
✔
✔
✔
✔
0
0, 30
0, 30
0, 30
0, 30
0
300
30
30
30
Military Cross Reference
Aerospace and Military Standard cross reference to PANDUIT ® part numbers
The PANDUIT ® Cable Ties and Marker Ties listed in the table below meet all the testing requirements of
Aerospace Standard SAE-AS23190A (formerly MIL-S-23190E) and the dimensional requirements of
Aerospace Standards SAE-AS33671 (formerly MS3367) and SAE-AS33681 (formerly MS3368).
Cable Ties
PAN-TY
Cable Tie
Part Number
PLT2S
PLT4S
PLT4H
PLT.7M
PLT1M
PLT1.5I
PLT8LH
—
PLT3S
—
—
—
—
—
—
®
Current MIL Std.
Part Number*
MS3367-1-*
MS3367-2-*
MS3367-3-*
MS3367-4-*
MS3367-4-*
MS3367-5-*
MS3367-6-*
MS3367-6-*
MS3367-7-*
MS3367-23-*
MS3367-24-*
MS3367-25-*
MS3367-26-*
MS3367-27-*
MS3367-29-*
DOME-TOP ®
Barb Ty Cable Tie
Part Number
BT2S
BT4S
BT4LH
—
BT1M
BT1.5I
BT8LH
BT9LH
BT3S
—
—
—
—
—
—
STA-STRAP ®
Cable Tie
Part Number
SST2S
SST4S
SST4H
—
SST1M
SST1.5I
SST8H
—
SST3S
—
—
—
—
—
—
BELT -TY ™
In-Line Cable Tie
Part Number
—
—
—
—
—
—
—
—
—
ILT2S
ILT4S
ILT4LH
ILT1M
ILT1.5I
ILT3S
Marker Ties
Current MIL Std.
Part Number*
MS3368-1-*A
MS3368-2-*A
MS3368-3-*C
MS3368-4-*D
MS3368-5-*E
PAN-TY ®
Cable Tie
Part Number
PLM2S
PLM4S
PL2M2S
PL3M2S
PLM1M
DOME-TOP ®
Barb Ty Cable Tie
Part Number
BM2S
BM4S
B2M2S
B3M2S
BM1M
The PANDUIT ® Installation Tools listed in the table below
meet all the testing requirements of MIL-T-81306 and the
dimensional requirements of MS90387.
Installation Tools
Current MIL Std.
Part Number*
MS90387-1
MS90387-2
MS90387-3
Tool
Part Number
GTS, GS2B
GS4H
GS4MT
* Color Code (See Material/Color Chart located in the back of each product line section).
Most commonly used parts appear in BOLD.
51
Custom Hot Stamping
PANDUIT ® Custom Hot Stamping Program
A custom program to mark
nylon cable ties, marker ties
and marker plates to suit
your application
requirements . . .
• Economical
• Convenient
• 1/8" (3mm), 3/16" (4.8mm), 5/64" (2mm) and 7/64"
(2.8mm) characters are available
• Standard Type Style: News Gothic
• Character sizes can be mixed from line-to-line
• Alphanumeric and sequential numbering for
serialization are available
• Sequential numbering available in 3/32" (2.4mm), 9/64"
(3.6mm), and 1/8" (3mm) characters
• Seven colors of hot stamping to make your message
stand out — Black, Blue, Green, Red, Yellow, Orange
and White
• Special logos, type styles and sizes can be provided
(when camera ready artwork is supplied)
• Minimum order: 5,000 pieces per part number and
message
Cable Tie Cross Sections
INTERMEDIATE
(Locking)
STANDARD
(Locking and Releasable)
LIGHT-HEAVY AND HEAVY
(Locking and Releasable)
EXTRA-HEAVY
(Locking and Releasable)
Marker Tie Cross Sections
MINIATURE
(Locking)
STANDARD
(Locking)
NOTE: Most cable ties and marker ties are available in colors
(See information at the back of each tie section).
Contact Your Local PANDUIT ® Distributor for Details
52
Most commonly used parts appear in BOLD.
PAN -POUCH ™ Telephone Cable Identification Kit
PANDUIT ® PAN-POUCH ™
Telephone Cable
Identification Kit
The PAN -POUCH ™ system provides a fast, convenient method of
identifying binder groups on both sides of a splice in PIC cable.
It consists of striped PAN -TY ® Cable Ties in 25 color combinations
which match the universally accepted Even-Count Color Code.
In addition, solid color ties are available for identification of
“Super Groups” in cable containing more than 600 pairs. Cable
ties have maximum bundle diameter of .82" (21mm). Each 50 pc.
package fits into PAN -POUCH ™ over Pocket Pouch.
.100
(2.5)
.185
(4.7)
3.8
(95)
.175
(4.4)
.154
(3.9)
.036
(.9)
Nylon 6.6 Cable Ties
Packaging*
Color
Stripe
Packaging*
Std.
Pkg.
Qty.
Std.
Ctn.
Qty.
Part Number
Cable Tie
Color
1000
1000
1000
1000
1000
PLT1M-L6-4
PLT1M-L3-4
PLT1M-L5-4
PLT1M-L1-4
PLT1M-L8-4
Blue
Orange
Green
Brown
Slate
Std.
Pkg.
Qty.
Std.
Ctn.
Qty.
Yellow
50
50
50
50
50
1000
1000
1000
1000
1000
Part Number
Cable Tie
Color
PLT1M-L6-10
PLT1M-L3-10
PLT1M-L5-10
PLT1M-L1-10
PLT1M-L8-10
Blue
Orange
Green
Brown
Slate
White
50
50
50
50
50
PLT1M-L6-2
PLT1M-L3-2
PLT1M-L5-2
PLT1M-L1-2
PLT1M-L8-2
Blue
Orange
Green
Brown
Slate
Red
50
50
50
50
50
1000
1000
1000
1000
1000
PLT1M-L6-7
PLT1M-L3-7
PLT1M-L5-7
PLT1M-L1-7
PLT1M-L8-7
Blue
Orange
Green
Brown
Slate•
Violet
50
50
50
50
50
1000
1000
1000
1000
1000
PLT1M-L6-0
PLT1M-L3-0
PLT1M-L5-0
PLT1M-L1-0
PLT1M-L8-0
Blue
Orange
Green
Brown
Slate
1000
1000
1000
1000
1000
PLT1M-L2
PLT1M-L0
PLT1M-L4
Red
Black•
Yellow•
—
Black
50
50
50
50
50
50
50
50
1000
1000
1000
PLT1M-L6
PLT1M-L3
PLT1M-L5
PLT1M-L1
PLT1M-L8
Blue•
Orange•
Green•
Brown•
Slate•
—
50
50
50
50
50
1000
1000
1000
1000
1000
Cable ties in other solid colors (sold in 100 pc. packages) see pages 24-26.
•Not included in filled PA N-PO UCH
™
Color
Stripe
.
Pouches
PAN-POUCH ™ is 10 1/2" x 38"
(267mm x 965mm) made of
2 ply laminated black nylon/
vinyl and folds to 10 1/2" x 6"
(266m x 152mm) for easy
storage. The pouch can be
easily hung from cable by
using Hook & Loop fasteners.
Packaging*
Part Number
Description
PPC25x50F
PAN-POUCH ™ filled with 1250 cable ties.
50 each of all 24 striped ties plus
solid red.
PPC25x50
Empty PAN -POUCH ™
PP5x50F
Pocket Pouch filled with 250 cable ties.
50 each: blue, orange, green, brown and
slate all with white stripe.
Pouch
Material
Std.
Pkg.
Qty.
2 ply
Laminated
Black Nylon/
Vinyl
1
Vinyl
1
1
Pocket Pouch holds
five (50 pc.) packages.
*Order by the number of pieces required in multiples of package quantities.
All part numbers shown in standard package quantities unless denoted by ‡.
Most commonly used parts appear in BOLD.
53
Cable Tie Kits
Cable Tie Kits in
Plastic Boxes —
KP-506A/KP-506A-0
Cable Ties and
Accessories Kit
Part Number
Description
KP-506A
Contains natural nylon ties for indoor use:
(100) PLT1M-C Cable Ties
(100) PLT1.5I-C Cable Ties
(100) PLT2S-C Cable Ties
(50) ABM2S-A Mounts
(1) Plastic Kit Box
KP-506A-0
KP-509
KP-509 Designer’s Kit
KB-550
KB-551
Cable Tie Kits in
Steel Boxes —
K-504 Cable Ties and
Accessories Kit
K-504
SR2
K-205 Cable Ties and
Terminal Kit
54
Most commonly used parts appear in BOLD.
Std.
Pkg.
Qty.*
K-205
Contains weather resistant cable ties and mounts for outdoor use:
(100) PLT1M-C0 Black Weather Resistant Cable Ties
(100) PLT1.5I-C0 Black Weather Resistant Cable Ties
(100) PLT2S-C0 Black Weather Resistant Cable Ties
(50) ABM2S-AT-0 Black Weather Resistant Mounts
(1) Plastic Kit Box
A special collection of cable ties and wiring accessories for prototyping and new
product development.
Contains (over 600 pieces):
Including PAN-TY ® Cable Ties (in different styles, sizes, colors and materials);
25 different cable tie mounts; 30 different wiring accessories;
(1) Plastic Kit Box
Assortment Pack contains natural and weather resistant PAN-TY ® nylon cable ties:
(15) PLT1M Cable Ties
(10) PLT1M Black Weather Resistant Cable Ties
(15) PLT1.5I Cable Ties
(10) PLT1.5I Black Weather Resistant Cable Ties
(15) PLT2S Cable Ties
(10) PLT2S Black Weather Resistant Cable Ties
(15) PLT3S Cable Ties
(10) PLT3S Black Weather Resistant Cable Ties
Assortment Pack contains natural and weather resistant DOME-TOP ® Barb Ty nylon
cable ties:
(15) BT1M Cable Ties
(10) BT1M Black Weather Resistant Cable Ties
(15) BT1.5I Cable Ties
(10) BT1.5I Black Weather Resistant Cable Ties
(15) BT2S Cable Ties
(10) BT2S Black Weather Resistant Cable Ties
(15) BT3S Cable Ties
(10) BT3S Black Weather Resistant Cable Ties
Contains cable ties, adhesive backed mounts and cable tie installation tool:
(100) PLT1M-C Cable Ties
(100) PLT1.5I-C Cable Ties
(100) PLT2S-C Cable Ties
(100) PLC2S-S10-C Clamp Ties
(100) TM2S8-C Mounts
(100) ABM2S-A-C Mounts
(1) STS2 Tool
(1) Steel Kit Box
2-Drawer Slide Rack to hold K-504 Kit or K-1100 Series Terminal Kits.
See PANDUIT ® Terminal Catalog, SA101N21B-NL.
Contains 300 cable ties, 600 terminals and 2 installation tools:
(100) PLT1M-C Cable Ties
(100) PLT1.5I-C Cable Ties
(100) PLT2S-C Cable Ties
(1) GTS Cable Tie Installation Tool
(100) PV18-6LF-C Terminals
(100) PV14-8LF-C Terminals
(100) PV14-10LF-C Terminals
(50) PV10-10LF-L Terminals
(100) BSV18X-C Splices
(100) BSV14X-C Splices
(50) BSV10X-L Splices
(1) CT-100 Crimping Tool
(1) Steel Kit Box
1
1
1
1
1
1
1
1
*Order the number of kits required in multiples of package quantities.
All part numbers shown in standard package quantities unless denoted by ‡.
Cable Tie Installation Tools
Cable Tie Installation Tools
The PANDUIT ® Selection. . . PANDUIT ® offers the greatest selection of job-matched tools:
Tool Controlled Tension
and Cutoff Tools
Pneumatic Tool Controlled
Tension and Cutoff Tools
Operator Controlled Tension and
Cutoff Tools
PAT1M/PAT1.5M Automatic Cable Tie
Installation Systems
Choosing the right tool increases productivity. . .
Whatever the need; Original Equipment Manufacturer (high, medium, low volume), maintenance/repair or
construction; PANDUIT ® has the tool to help lower your total installed cost. The following chart can be
used as a guide for tool selection:
Tool
Cable Tie
Cross
Section
GTS
SM, M, I or S
GS2B
M, I, or S
GTH
S, HS, LH
or H
GS4H
GS4H/B
S, HS, LH or H
GS4H121W
S, HS, LH or H
GS4EH
M, I
or S
STH2
S, LH
or H
STHV
PTS
PPTS
PPTEH
PAT1M/PAT1.5M
Systems (Automatic)
Per Minute
Per Year
Operation
Typical Application(s)
4-6
Under
50,000
Hand
Low to Medium Volume OEM tie usage, maintenance/
repair or construction
1-4
Under
10,000
Hand
Maintenance/repair or construction
5-8
Up To
250,000
Pneumatic
250,000
and above
Pneumatic/
Electric
LH, H
or EH
STS2
ST2EH
Cable Tie Usage
LH, H
or EH
LH or H
SM, M, I or S
M, I, or S
LH, H
or EH
M
30-40
Medium to High Volume OEM tie usage where a variety
of tie sizes are needed.
High Volume OEM tie usage
Most commonly used parts appear in BOLD.
55
Hand-Operated Tools
Hand-Operated Tools —
The most preferred hand-operated cable tie tools in the industry.
These tools are versatile and can be used for production,
maintenance or construction applications. These tools will tension
and cut off excess tie material flush to the head by squeezing
trigger handle.
Tool-Controlled Tension
and Cut-Off
For PANDUIT ® Cable Ties up to 1/2" (12.7mm) wide
•
•
•
•
Lightweight and balanced
Requires no special maintenance
Easy to change tension adjustment and easy to operate
Proven features to help lower installed costs; a combination of
design, operating and construction features provide a long
service life
• Replacement blades available
Part Number
GTS
Description
Installs PANDUIT ® Subminiature, Miniature, Intermediate and Standard cross
section cable ties. Qualified Product Listed per Mil. Std. MS90387-1 and
Mil. Spec. MIL-T-81306A. Plastic molded housing. Ergonomic design.
1
Color Identification:
Trigger Handle: Black
Selector Knob: Black
Weight: 8.8 oz. (249g)
GS2B
Installs PANDUIT ® Miniature, Intermediate and Standard cross section
cable ties. Qualified Product Listed per Mil. Std. MS90387-1 and
Mil. Spec. MIL-T-81306A.
1
Color Identification:
Trigger Handle: Black
Selector Knob: Black
Weight: 11.5 oz. (327g)
GTH
Installs PANDUIT ® Standard, Heavy-Standard, Light-Heavy and Heavy cross
section cable ties. Plastic molded housing. Ergonomic design.
Color Identification:
Trigger Handle: Red
Selector Knob: Red
Weight: 11.2 oz. (318g)
GS4H
1
Installs PANDUIT ® Standard, Heavy-Standard, Light-Heavy and Heavy cross
section cable ties. Durable powder coat finish. Qualified Product Listed per
Mil. Std. MS90387-2 and Mil. Spec. MIL-T-81306A.
1
Color Identification:
Trigger Handle: Red
Selector Knob: Red
Weight: 16 oz. (454g)
GS4H/B
Installs PANDUIT ® Standard, Heavy-Standard, Light-Heavy and Heavy cross
section cable ties. Durable powder coat finish. High tension, factory set,
non-adjustable.
1
Color Identification:
Trigger Handle: Blue
Weight: 16 oz. (454g)
GS4H121W
Installs PANDUIT ® Standard, Heavy-Standard, Light-Heavy and Heavy cross
section cable ties. This tool provides greater tension, especially on 175 lb.
strength ties, which results in tighter bundles. Durable powder coat finish.
1
Color Identification:
Trigger Handle: Green
Selector Knob: Green
Weight: 16 oz. (454g)
GS4EH
Installs PANDUIT ® Light-Heavy, Heavy and Extra-Heavy cross section cable ties.
Durable powder coat finish.
Color Identification:
Trigger Handle: Blue
Selector Knob: Blue
Weight: 15 oz. (426g)
56
Std.
Pkg.
Qty.*
1
*Order the number of pieces required in multiples of package quantities.
Most commonly used parts appear in BOLD.
Hand-Operated Tools
Hand Operated
Tools—
Installer-Controlled
Tension and Cut-Off
PANDUIT ® offers an economical series of tools for maintenance or
construction applications — the user determines the required cable tie
tension and the tools provide a cut-off. Used with the full line of PANDUIT ®
Cable Ties.
Part Number
STS2
Description
Installs PANDUIT ® Miniature, Intermediate or Standard cross section cable ties.
See STH2 operation below.
Color Identification: Black
Weight: 2 1/2 oz. (71g)
STH2
Std.
Pkg.
Qty.*
1
Installs PANDUIT ® Standard, Heavy-Standard, Light-Heavy or Heavy cross section
cable ties.
Color Identification: Red
Weight: 2 1/2 oz. (71g)
INSTALLATION PROCEDURE FOR
STS2 AND STH2 TOOLS
1. Install cable tie around bundle.
Tension tie by squeezing tool handle.
2. Reduce tension slightly and twist tool
1/4 turn either direction for cut-off of
cable tie.
• Inexpensive, maintenancefree, all purpose tools
• Ergonomic handle design
and short handle span
• Top loading feature for right
or left-handed users
ST2EH
1
Installs PANDUIT ® Light-Heavy, Heavy or Extra-Heavy cross section cable ties.
Color Identification: Black Handles
Weight: 16 oz. (454g)
After installing tie around bundle
and tensioning, tool is twisted a 1/4 turn
“in either direction” to cut off excess tie.
1
• Durable all steel construction
• Comfortable rubber handles
STHV
Installs PANDUIT ® Light-Heavy and Heavy cross section cable ties.
Color Identification: All Yellow
Weight: 14 oz. (399g)
After installing tie around bundle, the
handles are squeezed to provide
tension. A separate lever cuts
excess tie.
1
• Durable all steel
construction
• “Travel stop” helps prevent
pinched fingers
*Order the number of pieces required in multiples of packaging quantities.
Most commonly used parts appear in BOLD.
57
Pneumatic Hand Tools
Pneumatic Hand Tools
PANDUIT ® pneumatic tools tension and cut off excess tie after it
is hand-installed around the bundle, minimizing operator fatigue.
Tools are rugged, yet lightweight.
Tool-Controlled Tension
and Cut-Off
For PANDUIT ® Cable Ties up to 1/2" (12.7mm) wide
• Easy to change tension adjustment
• Requires no special training to use
• Durable, lightweight, easy to operate and designed to reduce
operator fatigue
• Tensions and cuts off excess tie in a fraction of a second
• Operates on non-lubricated air, without special maintenance
Part Number
PTS
Description
Installs Subminiature, Miniature, Intermediate or Standard cross section
cable ties.
Color identification: (Knob) Black
Weight: 17.3 oz. (490g)
Replacement parts can be part of a scheduled maintenance program
Plastic molded housing
Ergonomic design
PPTS
1
Installs Miniature, Intermediate or Standard cross section cable ties.
Color identification: (Knob) Black
Weight: 18 oz. (510g)
Replacement parts can be part of a scheduled maintenance program
Powder coat finish
PPTEH
Std.
Pkg.
Qty.*
1
Installs Light-Heavy, Heavy and Extra-Heavy cross section cable ties.
Color Identification: (Knob) Blue
Weight: 52 oz. (1476g)
Replacement parts can be part of a scheduled maintenance program
Powder coat finish
1
Filter Regulator and Hose
PPH10
10' (3m) Hose Assembly (regulator to tool). Includes a 1/8" NPT male
connector (to regulator) and 1/8" female quick disconnect fitting (to tool).
1
PL289N1
Filter/Regulator .5 micron (max.) element, regulated range 3-100 PSIG,
1/8" ports.
1
Note: PTS, PPTS and PPTEH tools require the PPH10 hose and PL289N1 Filter/Regulator for proper operation.
58
*Order the number of pieces required in multiples of package quantities.
Most commonly used parts appear in BOLD.
Hand-Operated Tool Accessories
Adjustment Features
Each cross section of cable ties can be installed with a variety of tensions to meet the application.
The proper tension range is marked on each package of cable ties.
Fast and Easy Selection
GTS Tool — Tension Setting Dial
GS2B Tool — Tension Setting Knob
Tool Tension Lock Kits
Certain applications require a locking
device on the selector knob
(one cross-section size and tension only).
Repair Parts
Can be part of a scheduled
maintenance plan or use only when
cutoffs are not clean and crisp.
Part Number
Description
KGTSTL
Tension Locking Kit for GTS.
KGTHTL
Tension Locking Kit for GTH.
KPTSTL
Tension Locking Kit for PTS.
TTLK3
Tool Tension Lock Kit.
Each kit contains (1) #4-40 selection locking screw (with head), (1) selection locking
clip, and (1) #4-40 tension locking screw (headless). For use with GS-Family Tools.
Std.
Pkg.
Qty.*
10
Blade Replacement Kits
KGTSBLD
Blade Replacement Kit for GTS, PTS.
KGTHBLD
Blade Replacement Kit for GTH.
K2-BLD2
Blade Replacement Kit for GS2B and PPTS (all versions).
K4H-BLD
Blade Replacement Kit for GS4H series (3-screw blade guard only).
KPPTEHB
Blade Replacement Kit for PPTEH series.
1
Gripper Replacement Kits
Hand Tool Accessory
KPPTEHG
KPTSG
KST2EHG
Gripper Replacement Kit for PPTEH series.
Gripper Replacement Kit for PPTS.
Gripper Replacement Kit for ST2EH.
GHH
Specifically designed to hold GTS, and GS (series) or PPTS tools.
Used wherever the hand tools are used—construction sites to assembly lines for
a convenient and handy place for the tool.
1
1
GHH — Holster
*Order the number of pieces required in multiples of package quantities.
Most commonly used parts appear in BOLD.
59
Fully Automatic Cable Tie Installation Systems
PAT1M/PAT1.5M Reel-Fed Systems for Miniature Cross Section Cable Ties
(18 lb. (80N) minimum loop tensile)
• The system consists of the tool head, dispenser, feeder hose and
continuously molded, reel-fed cable ties (5000 ties per reel). Each system
will install a cable tie in less than one second
• Choice of two tool head sizes for bundle diameters up to .82" (21mm) or up
to 1.3" (33mm)
• The dispenser and hose are designed to operate with either tool head for
maximum versatility and economy
• The system design permits complete mobility in the use of the tool and
location of the dispenser
• The system operates on 65 psig (minimum) non-lubricated, filtered air and
100-240 VAC 150 or 60 Hz—Automatically adjusts within this range
• Optional bench mount shown on page 61
• Choice of 3 materials
Tool Heads
Part Number
Dispenser
Description
Std.
Pkg.
Qty.*
PAT1M
Tool Head for cable ties up to .82" (21mm) bundle diameter (PLT1M-XMR).
1
PAT1.5M
Tool Head for cable ties up to 1.3" (33mm) bundle diameter (PLT1.5M-XMR).
1
• Lightweight, no counter-balance required
• Slim, ergonomically designed handle for operator comfort and greater productivity. Reduces
potential for repetitive motion injuries
• Right or left hand operation
• Durable, one-piece cable tie tip collector (for cut-off tips)
• Includes tension adjustment
• Built-in safety interlock prevents false triggering if anything obstructs jaw path
PDM
Stationary dispenser for 100 VAC, 120 VAC and 230 VAC.
• LCD display monitors performance.
If an error occurs an alarm is sounded
• On-line HELP menu
• Multi-language capability via LCD
display (English, Spanish, German,
Italian or French)
• Cable tie reels are easily loaded into
the dispenser, reducing downtime
• Audible reload signal when reel is empty
• Minimum maintenance required
• Power cord included
1
Specifications
Pneumatic
Electrical
• Operates at
• 100-240
65 psig
VAC
minimum
• 50 or 60 Hz.
• 7 scfm flow
• Less than
minimum
1 amp
• Operates on
• Approx.
non-lubricated
20 watts
air
(AVG)
Feeder Hose
Choose one:
PHM1
3.2' (1m) Feeder Hose.
1
PHM2
6.5' (2m) Feeder Hose.
1
PHM3
9.8' (3m) Feeder Hose.
1
•
•
•
•
Transfers cable ties and signal from dispenser to tool head
Available in three lengths for either tool head
Reversible
Large electrical connectors for quick, easy and secure connections
Other Components
60
Most commonly used parts appear in BOLD.
PDH10-37
Air hose from filter/regulator to dispenser/. 9.8' (3m).
Includes standard air fittings.
1
PL283N1
Filter/regulator 25 micron (max.) element, 3/8 " ports.
1
Cable Ties for Automatic Installation Systems
PATMBM Bench Mount used with PAT1M/PAT1.5M Automatic Systems for
Miniature Cross Section Cable Ties (18 lb., 80N minimum loop tensile)
For Operations Where the Application is Brought to the Tool
• Used with either PAT1M or PAT1.5M tool head
• Supplied with a foot-actuated pedal to allow operator to work
with both hands
• A tool can be installed in the mount in seconds
• Supplied with a four-hole base plate
• The bench mount operates on 65 psi non-lubricated, filtered
air which pilots off of the dispenser
In addition to tool head, dispenser, feeder hose and cable ties on reels;
order the following:
Description
Pkg.
Qty.
Bench mount and foot pedal for PAT1M/PAT1.5M system, four-hole base plate.
1
Part Number
PATMBM
Cable Ties for PAT1M/PAT1.5M Systems
Continuously molded cable ties in sizes, color and
material options to meet the application.
Part Number
Color
Max. Bundle
Diameter
in. (mm)
Length
in.
(mm)
Width
in.
(mm)
Min. Loop
Tensile
Strength Lbs.
(N)
.100
(2.5)
18
(80)
Use with
PANDUIT ®
Installation
System
Nylon 6.6 (for indoor use) up to 185°F (85°C)
• Miniature cross section
cable ties
• Self-locking
• UL Recognized
• 5000 ties/reel
Reels of 5,000 — 2 Reels/Carton
Cable Ties on Reels
PLT1M-XMR
Natural
PLT1M-XMR1
PLT1M-XMR2
PLT1M-XMR3
PLT1M-XMR4
PLT1M-XMR5
PLT1M-XMR6
PLT1M-XMR7
PLT1M-XMR8
PLT1M-XMR10
Brown
Red
Orange
Yellow
Green
Blue
Purple
Gray
White
PLT1.5M-XMR
Natural
.82
(21)
4.0
(102)
1.31
(33)
5.6
(142)
PAT1M
PAT1.5M
Weather Resistant Nylon (for outdoor use) up to 185°F (85°C)
PLT1M-XMR0
PLT1.5M-XMR0
Black
.82
(21)
4.0
(102)
1.31
(33)
5.6
(142)
PAT1M
.100
(2.5)
18
(80)
PAT1.5M
Heat Stabilized Nylon (for indoor use) up to 238°F (115°C)
PLT1M-XMR30
PLT1.5M-XMR30
Black
.82
(21)
4.0
(102)
1.31
(33)
5.6
(142)
PAT1M
.100
(2.5)
18
(80)
PAT1.5M
Flammability Rating: UL 94V-2, ATB < sec. per ASTM-D635.
Most commonly used parts appear in BOLD.
61
Cable Tie Selection and Specification Guidelines
Selecting the Proper Cable Tie Material for Your Application
By using this information as a guide, the user will be better equipped to select the best suited cable tie
and material to perform its intended function over a long period of time.
For long life and dependable service, there are many factors to consider when selecting the proper cable
tie for each application. Since it is impossible for PANDUIT ® to provide data on all the various
combinations of conditions which may arise, it is suggested that this data be used as a guide. Sample
cable ties should be tested under actual end-use conditions to determine the correct cable tie for
the application.
HALAR**
-69
-120
-109
-100
-76
-702
N/A
Stainless Steel*
TEFZEL***
-60
Weather Resistant
Acetal
Flame Retardant
6.6 Nylon
-300
Weather Resistant
Polypropylene
Flame Retardant
Black 6.6 Nylon
-39
Natural
Polypropylene
Heat Stabilized
Natural 6.6 Nylon
-30
Weather Resistant
Nylon 12
Heat Stabilized Black
6.6 Nylon
-0
Heat Stabilized
Weather Resistant
6.6 Nylon
Weather Resistant
6.6 Nylon
Natural
6.6 Nylon
To select the optimum cable tie for a specific application, the following table can be used as a quick
reference. First, determine the most critical design criteria and then read across the table to find which
material is most suitable to meet this need (10 = Most Suitable and 1 = Least Suitable). Next, review the
other criteria by scanning in a vertical direction on the chart and then make your final selection.
Design Criteria
Part Number Suffix
Material Designation
Loop Tensile Strength
7
7
7
7
7
7
7
6
5
5
7
5
9
10
Low Temperature Service
6
6
6
6
6
5
5
6
6
6
7
7
6
10
High Temperature Service
5
5
6
6
6
5
5]
5
5
5
8
7
3
10
Flammability
6
6
6
6
6
8
8
3
2
2
9
9
2
10
Ultraviolet Resistance
1
6
4
1
6
1
1
7
1
6
9
9
9
10
Radiation Resistance
3
3
3
3
3
3
3
4
5
5
9
9
3
10
Overall Chemical Resistance
–Hydrocarbons
–Chlorinated Hydrocarbons
–Acids
–Bases
–Salts
6
9
7
2
7
3
6
9
7
2
7
3
6
9
7
2
7
3
6
9
7
2
7
3
6
9
7
2
7
3
6
9
7
2
7
3
6
9
7
2
7
3
8
9
8
6
7
8
8
6
5
9
9
10
8
6
5
9
9
10
10
10
10
10
10
10
10
10
10
10
10
10
5
9
8
2
2
4
9
10
10
10
8
9
Low
Low
Low
Low
Med.
Med.
Med.
Med.
Low
Low
High
High
Med.
High
Relative Price
Example No. 1:
Application
If the application requires high radiation (2 x 108 rads) resistance, excellent
resistance to hydrocarbons and the price is not critical.
Selection
The best choice is TEFZEL*** or stainless steel. The price is higher than other
materials, but both have high ratings in resistance to radiation and hydrocarbons.
Example No. 2:
Application
Selection
If the application requires a low cost material, good ultraviolet resistance and good
resistance to acid rains.
The best choice is weather resistant polypropylene. Cost is low; it has a rating of 6
in ultraviolet resistance and a rating of 9 in resistance to acids.
62
Most commonly used parts appear in BOLD.
*See page 70 (Table C) for chemical resistance of 304 & 316 stainless steel.
** HALAR is a registered trademark of Solvay Solexis, Inc.
*** TEFZEL is a registered trademark of E. I. DuPont de Nemours Co.
Material Selection Guide
To select the proper cable tie for your application, start at the
left of the chart and answer the “Yes” and “No” questions until
you arrive at the correct material to use.
Suggested Material to use
No — Nylon 6.6
No
No
Material must
resist high
heat?
Yes
Material must
be resistant to
chemicals
(salt/acids)?
Yes — Flame Retardant Nylon 6.6 (-69)
No — Heat Stabilized Nylon 6.6 (-30)
Material must
be flame
retardant?
Yes —Stainless Steel
No — Natural Polypropylene (-109)
No
Yes
Material must
be flame
retardant?
Material must
be flame
retardant?
Material must
resist high
heat?
No
Yes
Yes — Stainless Steel
No — Stainless Steel
Material must
be flame
retardant?
Yes — Stainless Steel
START
Does material
need to be
UV resistant?
No
Yes
No
Material must
resist high
heat?
Yes
Material must
be resistant
to chemicals
(salt/acids)?
No — Weather Resistant
Nylon 6.6 (-0) (-00)
Weather Resistant Acetal
Yes — Stainless Steel
Material must
be flame
retardant?
No — Weather Resistant Heat
Stabilized Nylon 6.6 (-300)
Yes — Stainless Steel
No
Yes
Material must
be flame
retardant?
Material must
resist high
heat?
Yes
**HALAR is a registered trademark of Solvay Solexis, Inc.
*** TEFZEL is a registered trademark of E. I. DuPont de Nemours Co.
Material must
be flame
retardant?
No — Weather Resistant
Polypropylene (-100)
or Nylon 12 (-120)
Yes — Stainless Steel
Material must
be flame
retardant?
No — Stainless Steel
Yes — Stainless Steel
or TEFZEL** (-76)
or HALAR* (-702)
Most commonly used parts appear in BOLD.
63
Weathering
Weathering
Ultraviolet light (which is a component of sunlight) attacks, over a period of
time, most plastic materials and reduces their properties by breaking the
molecular chain. The material breakdown is accompanied by reductions in
tensile strength and elongation, increased brittleness, color changes and
loss of surface gloss.
Carbon black, which is used in PANDUIT ® nylon and polypropylene cable
ties, is one of the most effective stabilizers known today. A uniform
dispersion of carbon black provides good ultraviolet light resistance without
adversely affecting physical properties. The addition of carbon black, or any
other ultraviolet light stabilizer, prolongs the useful life of plastic products
used outdoors, but it does not totally eliminate the destructive effects of the
light. Some plastics, such as TEFZEL** or HALAR*, are intrinsically very
resistant to ultraviolet light and do not require stabilizing additives.
Weathering Test Methods
In order to monitor the effects of ultraviolet light and the effectiveness of ultraviolet stabilizers, PANDUIT ®,
in conformance with industry standards, adopted two methods of weatherability testing: Outdoor Aging and
Accelerated Weather Aging.
Outdoor Aging
The Outdoor Aging method is probably the best and most realistic method of the two. It is conducted in
accordance with ASTM D1435 Standard Practice for Outdoor Weathering of Plastics, and allows the
material to be affected by not only ultraviolet light, but by all other outdoor elements as well. Although this
may more closely approximate an actual application, two drawbacks do exist. The period of time required
to produce property decay and material failure may be quite long, and varying adverse chemical
environments cannot be tested.
Accelerated Weather Aging
Accelerated weathering tests are conducted to estimate the rate of degradation due to a combination
of ultraviolet light, temperature and moisture. The methods used are in accordance with the
following standards:
• ASTM D1499, Operating Light and Water Exposure Apparatus (Carbon-Arc type) for exposure
to plastics
• ASTM G53, Operating Light and Water Exposure (Fluorescent U.V. Condensation type) for exposure of
non-metallic materials
The condition specified in ASTM D1499 utilizes a carbon arc to simulate natural sunshine and a water
spray. The test chamber is operated 20 hrs/day with a two hour cycle of 108 minutes of simulated sunshine
and 12 minutes of sunshine and water spray. The temperature of a black body inside the chamber is
approximately 63°C (145°F) during the “Sunshine Only” portion of the cycle. Humidity is not controlled
inside the chamber.
The test chamber per ASTM G53 uses fluorescent sun lamps to generate ultraviolet light only. A heated
water pan produces condensation during a portion of the cycle.The daily cycle is composed of 20 hours of
light followed by 4 hours of condensation. Black body temperatures during the light cycle are 50°C (122°F)
and 40°C (104°F) during the condensation cycle.
PANDUIT ® has also designed a special chamber which is used to simulate the effect of acid rain and
ultraviolet light on cable tie materials. The effect of other common chemicals, such as road salt, are also
evaluated in this chamber.
These methods are effective in quickly determining the ultraviolet light resistance of the various cable tie
materials, but it must be emphasized that there are no exact correlations between accelerated aging and
actual outdoor exposure.
64
Most commonly used parts appear in BOLD.
*HALAR is a registered trademark of Solvay Solexis, Inc.
**TEFZEL is a registered trademark of E. I. DuPont de Nemours Co.
Weathering
Material Failure Testing
Property decay can lead to three different modes of failure: loss of strength, loss of toughness or change
in appearance. The critical mode for any given application would depend upon the application and the
requirements it places upon the material itself.
Loss of strength is monitored by tensile testing samples of the material before and after it has been
weathered. This test will reveal the decreasing strength accompanied by extended weathering.
Loss of toughness can be monitored by measuring changes in elongation and impact strength. As
ultraviolet light exposure time increases and the material becomes brittle, its elongation and impact
strength are greatly reduced. It is important to note that brittle failures can occur even when the tensile
strength shows no change.
Although change in appearance is normally not a failure mode for cable ties, the plastic does tend to
discolor and lose its surface gloss as exposure increases. These changes can be measured by color
difference using Adams units which are similar to National Bureau of Standard units.
PANDUIT ® has its own weathering test program to determine estimated life of various cable tie
materials.This includes examining many previously aged samples obtained throughout the world.
In all cases, the amount of property decay increased with increasing exposure to ultraviolet light. The
principal signs of degradation were found to be brittleness, cracking and loss of surface gloss. It was also
determined that the time for failure to occur was shorter than indicated from industry tests performed on
material samples. This discrepancy is in part due to the fact that cable ties were tested in an end use,
stressed condition, while most plastic resin suppliers conduct weathering tests using unstressed
test bars.
Four cable tie materials (TEFZEL**, HALAR*, Weather Resistant ACETAL and Stainless Steel) have
superior ultraviolet light resistance. In tests conducted to date, all have shown no significant signs
of degradation.
Determining the outdoor life expectancy of any material is difficult since there are other factors, besides
ultraviolet light stability, which have to be considered. These factors are listed below and should be
considered before specifying a cable tie material.
TABLE A — External Factors Which Affect the Life of a Cable Tie
FACTORS
Chemicals
DECREASED LIFE
Applications which have chemicals present can reduce the life. This is
the most detrimental factor to the life of a tie.
Bundle
Diameter
As the bundle diameter is reduced, the tie has more bending stress.
A thick strap on small diameter has more stress.
Loading
If the tie is under high loading, this will add additional stress on the
tie body.
WEATHERING LIFE EXPECTANCY
Materials (P/N Suffix)
Natural Polypropylene (-109)
Years*
1
Natural Nylon 6.6
1-2
Flame Retardant Black Nylon 6.6 (-60)
1-2
Flame Retardant Nylon 6.6 (-69)
1-2
A thinner tie will have a decreased life since surface cracks will
penetrate the thickness of the tie faster.
Heat Stabilized Nylon 6.6 (-30)
4-5
Heat Stabilized Natural Nylon 6.6 (-39)
1-2
Applications with high vibrations will cause impact which will
propagate any surface cracks.
Weather Resistant Nylon 6.6 (-0 & -00)
7-9
Degree of
Exposure
No shield or shade, southern exposure, higher altitudes and high
temperatures decrease the life of the cable tie.
Heat Stabilized Weather Resistant Nylon 6.6 (-300)
7-9
Weather Resistant Polypropylene (-100)
Moisture
Dry environments cause nylon 6.6 ties to become more brittle. High
humidity plus high temperatures can result in degradation due to
hydrolysis in nylon.
Weather Resistant Nylon 12 (-120)
Acid rain and acid moisture acting on galvanized metals release
chemicals known to attack nylon 6.6.
Thickness
Vibration
Galvanized
Metals
7-9
12-15
TEFZEL** (-76)
>15
HALAR* (-702)
>15
Acetal
>20
Stainless Steel (MLT prefix)
>30
*Based on assumption of minimum loading, no chemical attack and
impact-free conditions.
*HALAR is a registered trademark of Solvay Solexis, Inc.
**TEFZEL is a registered trademark of E. I. DuPont de Nemours Co.
Most commonly used parts appear in BOLD.
65
Flammability
Flammability
A number of test procedures have been developed which can be used for the evaluation
and comparison of various materials to support combustion.
UL94 Vertical Burning Test
Samples of a material, with dimensions 127mm by 12.7mm and the thickness of the
intended end use product, are tested in an unaged “as manufactured” state and in an
aged state (7 days at 158 °F, 70°C). The test requires the placement of a precisely
controlled flame under a vertically supported specimen for a 10 second period. The
flame is removed and the duration of flaming is recorded. If the flame extinguishes, the
specimen is immediately subjected to a second 10 second ignition period. Duration of
flaming is again recorded. A piece of surgical cotton is placed under the specimen. If
drips ignite the cotton, this fact is also recorded.
Materials Classed 94V-0
Materials classed 94V-0 shall:
• Not have any specimens which burn with flaming combustion for more than 10 seconds after either
application of the test flame
• Not have a total flaming combustion time exceeding 50 seconds for the 10 flame applications for each
set of five specimens
• Not have any specimens which burn with flaming or glowing combustion up to the holding clamp
• Not have any specimens which drip flaming particles that ignite the dry absorbent surgical cotton
located 12" (305mm) below the test specimen
• Not have any specimens with glowing combustion which persists for more than 30 seconds after the
second removal of the test flame
Materials Classed 94V-1
Materials classed 94V-1 shall:
• Not have any specimens which burn with flaming combustion for more than 30 seconds after either
application of the test flame
• Not have a total flaming combustion time exceeding 250 seconds for the 10 flame applications for each
set of five specimens
• Not have any specimens which burn with flaming or glowing combustion up to the holding clamp
• Not have any specimens which drip flaming particles that ignite the dry absorbent surgical cotton
located 12" (305mm) below the test specimen
• Not have any specimens with glowing combustion which persists for more than 60 seconds after the
second removal of the test flame
Materials Classed 94V-2
• Not have any specimens which burn with flaming combustion for more than 30 seconds after either
application of the test flame
• Not have a total flaming combustion time exceeding 250 seconds for the 10 flame applications for each
set of five specimens
• Not have any specimens which burn with flaming or glowing combustion up to the holding clamp
• Be permitted to have specimens that drip flaming particles which burn only briefly, some of which ignite
the dry absorbent surgical cotton placed 12" (305mm) below the test specimen
• Not have any specimens with glowing combustion which persists for more than 60 seconds after the
second removal of the test flame
66
Most commonly used parts appear in BOLD.
Flammability
ASTM D 635
Samples of a material, with dimensions 125mm by 12.5mm and the thickness of the intended end use
product, are tested in an unaged “as manufactured” state. A precisely controlled flame is applied to the
specimen and a stopwatch is started. The flame is applied for 30 seconds. The stopwatch is stopped
when burning or glowing combustion ceases or when the flame has proceeded to a mark 100mm from
the free end. Ten specimens are tested.
• Burning Rate
• If two or more specimens have burned to the 100mm mark then Average Burning Rate (cm/min.) shall be reported
as the average of the burning rates of all specimens which have burned to the 100mm mark
• Average Time of Burning and Average Extent of Burning
• Average time of burning and average extent of burning of the sample shall be reported if none of ten samples or
no more than one of twenty specimens have burned to the 100mm mark
• Average Time of Burning (ATB):
• Average Extent of Burning (AEB):
10
ATB,s =
¦0
10
t – 30s Number of Specimens
Rounded to the nearest 5 sec.
AEB,mm =
(100 – unburned length)
¦ 0kjf dsjfs
Number of Specimens
Rounded to the nearest 5mm
Flammability Ratings
Materials
UL94
ASTM D635
Natural Nylon 6.6
94V-2 (1/16")
AEB = 20mm
ATB = 5 seconds
Weather Resistant Nylon 6.6 (-00)
94V-2 (1/16")
AEB = 20mm
ATB = 5 seconds
Weather Resistant Nylon 6.6 (-0)
94V-2 (1/16")
AEB = 20mm
ATB = 5 seconds
Heat Stabilized Nylon 6.6 (-30)
94V-2 (1/16")
AEB = 20mm
ATB = 5 seconds
Heat Stabilized Natural Nylon 6.6 (-39)
94V-2 (1/16")
AEB = 20mm
ATB = 5 seconds
Heat Stabilized Weather Resistant Nylon 6.6 (-300)
94V-2 (1/16")
AEB = 20mm
ATB = 5 seconds
Flame Retardant Black Nylon 6.6 (-60)
94V-0 (1/64")
AEB =15mm
ATB < 5 seconds
Flame Retardant Nylon 6.6 (-69)
94V-0 (1/64")
AEB = 15mm
ATB < 5 seconds
Weather Resistant Nylon 12 (-120)
Not Recognized
Ave. Burning Rate
1.6cm/min.
Natural Polypropylene (-109)
Not Recognized
Ave. Burning Rate
2 cm/min.
Weather Resistant Polypropylene (-100)
94 HB (.94mm)
Ave. Burning Rate
2 cm/min.
TEFZEL** (-76)
94V-0(1/16")
AEB < 15mm
ATB < 5 seconds
HALAR* (-702)
94V-0(1/16")
AEB = 15 min.
ATB < 5 seconds*
Weather Resistant ACETAL (DT Series)
94 HB (1.5mm)
Ave. Burning Rate
2.8 cm/min.
Stainless (MLT prefix)
Not Applicable
Not Applicable
Rating based on 1/8" thick test samples
*HALAR is a registered trademark of Solvay Solexis, Inc.
**TEFZEL is a registered trademark of E. I. DuPont de Nemours Co.
Most commonly used parts appear in BOLD.
67
Radiation/Moisture/Temperature/Tensile Strength
Radiation
Installed cable ties of various materials have been exposed to different amounts of
radiation to determine the maximum acceptable limit. These tests were conducted by
PANDUIT ® mainly to determine the acceptability for use in various areas of nuclear power
plants (accumulated over 40 year life). See Table B (page 69) for radiation resistance rating.
Moisture
Many plastics when exposed to high relative humidity absorb water and, as such, the tensile
strength of the material can change dramatically. Nylon 6.6 when exposed to 100% relative
humidity, will absorb as much as 8.5% water which will reduce tensile strength by 50% when
compared to a dry cable tie. Polypropylene, HALAR*, Type 12 Nylon, TEFZEL** and ACETAL
are low water absorbing materials and, as such, the effect of water is minimal.
See Table B (page 69) for moisture absorption.
Temperature
Plastic materials normally undergo property loss during exposure to high temperature due to
oxidation. The Maximum Continuous Use Temperature for cable tie materials depends upon the time
at the elevated temperature as well as other environmental conditions. Initially, plastics become
more flexible and weaker when exposed to high temperatures. After a period of time, oxidation may
occur which will cause embrittlement, making plastic cable ties more susceptible to failure from
impact and vibration.
The Maximum Continuous Use Temperature, otherwise known as the Relative Thermal Index
(mechanical without impact) is determined per UL746B. It is one indicator of a materials ability
to retain a particular physical property when exposed to elevated temperatures over an extended
period of time. It is based on the assumption that there is no loading, no chemical attack and impact free condition.
The Maximum Continuous Use Temperatures for cable tie materials are listed in Table B (see page 69).
Low temperature exposure will also make most plastics more brittle during the exposure, but little property loss
occurs when the material is returned to room temperatures. The Minimum Continuous Use Temperatures for cable tie
materials are listed in Table B (see page 69).
Tensile Strength
Most cable ties are selected based on material, length and minimum loop tensile strength. Minimum loop tensile
strength was established under SAE Aerospace Standard AS23190. Each cross section cable tie (Miniature-M,
Intermediate-I, Standard-S, Heavy-H and Extra Heavy-EH) has a different loop tensile strength when tested
per AS23190.
The cable tie is first conditioned at 49°C (120°F), 20% relative humidity for 24 hours, then
the cable tie is installed on a split mandrel and the halves of the mandrel separated at a rate
of 1" (25.4mm) per minute (Fig.1). The separating force required to unlock or break the
cable tie is the loop tensile strength. Loop tensile strength is dependent both on the locking
design and the tensile strength (psi) of the material. As an example, the tensile strength of
polypropylene material is approximately 1/2 to 1/3 of nylon 6.6; thus the loop tensile
strength of a given cross section tie made of polypropylene would be much less than a tie
made of nylon 6.6. This is another property to be considered when selecting a cable tie.
The various representative loop tensile strengths are listed in Table B (page 69).
68
Most commonly used parts appear in BOLD.
Fig. 1
*HALAR is a registered trademark of Solvay Solexis, Inc.
**TEFZEL is a registered trademark of E. I. DuPont de Nemours Co.
Physical Characteristics of Cable Tie Materials
-109
-100
-76
-702
Stainless Steel
-120
Weather Resistant
Acetal
-69
HALAR*
-60
TEFZEL**
-300
Weather Resistant
Polypropylene
Flame Retardant
6.6 Nylon
-39
Natural
Polypropylene
Flame Retardant Black
6.6 Nylon
-30
Weather Resistant
Nylon 12
Heat Stabilized
Weather Resistant
6.6 Nylon
-0 and
-00
Heat Stabilized Natural
6.6 Nylon
None
Heat Stabilized Black
6.6 Nylon
Natural
6.6 Nylon
Design Criteria
Part Number Suffix/
Material Designation
Weather Resistant
6.6 Nylon
TABLE B
N/A
N/A
Tensile Strength
73°F (psi)
12,000 12,000 12,000 12,000 12,000 12,000 12,000
8,100
4,100
4,100
7,500
7,000
6,500
(Note 1) (Note 1) (Note 1) (Note 1) (Note 1) (Note 1) (Note 1) (Note 1) (Note 1) (Note 1) (Note 1) (Note 1) (Note 2)
Color
Natural
Black
Black
Natural
Black
Black
28
28
26
26
26
34
34
NA
NA
NA
30
60
NA
NA
1 x 105
Rads
1 x 105
Rads
1 x 105
Rads
1 x 105
Rads
1 x 105
Rads
1 x 105
Rads
1 x 105
Rads
3.5 x 106
Rads
1 x 106
Rads
1 x 106
Rads
2 x 10 8
Rads
2 x 108
Rads
6 x 105
Rads
2 x 108
Rads
Water Absorption
(24 hours)
1.2%
1.2%
1.2%
1.2%
1.2%
1.1%
1.1%
0.3%
0.1%
0.1%
<0.03% <0.05% <0.45%
None
Ultraviolet Light
Resistance
Poor
Good
Fair
Poor
Good
Poor
Poor
Good
Poor
Good
Very
Good
Very
Good
Max. Continuous Use
Temperature (Note 4)
185°F
85°C
185°F
85°C
239°F
115°C
239°F
115°C
212°F
100 °C
(Note 5)
212°F
100 °C
212°F
100 °C
194°F
90°C
238°F
115°C
238°F
115°C
338°F
170°C
302°F
150°C
185°F
85°C
1000 °F
537°C
(Note 6)
Min. Continuous Use
Temperature (Note 7)
-40 °F
-40°C
-40 °F
-40°C
-40 °F
-40°C
-40 °F
-40°C
-40 °F
-40°C
-40 °F
-40°C
-40 °F
-40°C
-40°F
-40°C
-40°F
-40°C
-40°F
-40°C
-50°F
-46°C
-50°F
-46°C
-40°F
-40°C
-112°F
-80 °C
12 lb.
18 lb.
40 lb.
12 lb.
18 lb.
40 lb.
N/A
18 lb.
40 lb.
N/A
18 lb.
40 lb.
N/A
18 lb.
30 lb.
N/A
18 lb.
30 lb.
N/A
18 lb.
40 lb.
N/A
N/A
25 lb.
N/A
12 lb.
N/A
N/A
12 lb.
N/A
N/A
18 lb.
25 lb.
N/A
18 lb.
N/A
N/A
N/A
N/A
N/A
N/A
N/A
50 lb.
85 lb.
120/
175 lb.
250 lb.
50 lb.
85 lb.
120/
175 lb.
250 lb.
50 lb.
N/A
120/
175 lb.
250 lb.
50 lb.
N/A
120/
175 lb.
250 lb.
50 lb.
N/A
120 lb.
50 lb.
N/A
120 lb.
50 lb.
N/A
120 lb.
40 lb.
N/A
90 lb.
30 lb.
N/A
50 lb.
30 lb.
N/A
50 lb.
50 lb.
N/A
120 lb.
50 lb.
N/A
N/A
N/A
N/A
N/A
100 lb.
N/A
250 lb.
N/A
N/A
N/A
N/A
90 lb.
90 lb.
N/A
N/A
250 lb.
N/A
600 lb.
GTS
GTS
GTS
GTH
GTH
GTH
GS4H
GS4H
GS4H
GS4EH GS4EH STS2
STS2
STS2
STH2
STH2
STH2
ST2EH
ST2EH ST2EH STHV
STHV
STHV
PTS
PTS
PTS
PPTS
PPTS
PPTS PPTEH
PPTEH PPTEH
GTS
GTH
GS4H
STS2
STH2
ST2EH
STHV
PTS
PPTS
PPTEH
GTS
GTH
GS4H
STS2
STH2
ST2EH
STHV
PTS
PPTS
PPTEH
GTS
GTH
GS4H
STS2
STH2
ST2EH
STHV
PTS
PPTS
PPTEH
GTS
GTH
GS4H
STS2
STH2
ST2EH
STHV
PTS
PPTS
PPTEH
GTS
GTH
GS4H
STS2
STH2
STHV
PTS
PPTS
GTS
GTH
GS4H
STS2
STH2
PTS
PPTS
GTS
GTH
GS4H
STS2
STH2
PTS
PPTS
GTS
GTH
GS4H
STS2
STH2
PTS
PPTS
GTS
GTH
GS4H
STS2
STH2
PTS
PPTS
GTH
GS4H
GS4EH
ST2EH
GS4MT
ST2MT
PPTMT
HTMT
UL Flammability
Oxygen Index
Radiation Resistance
Submin.
Min.
Int.
Minimum
Loop Tensile
Std.
Strength
Hvy.-Std.
@120 °F
Hvy.
20% RH
EH
DH
Tool Installed
Ivory
Black
Green
Black
Aqua
Maroon
Black
90,000
(Note 3)
Stainless
See Page 66
Excellent Excellent
NOTE 1: ASTM D638
NOTE 2: Telcordia TR-TSY-000789
NOTE 3: ASTM E8
NOTE 4: See page 68 — Temperature
NOTE 5:Estimated
NOTE 6: (-321) goes to 1700° (923°C)
NOTE 7: After installation
*HALAR is a registered trademark of Solvay Solexis, Inc.
**TEFZEL is a registered trademark of E. I. DuPont de Nemours Co.
Most commonly used parts appear in BOLD.
69
Chemical Resistance
TABLE C
Chemical Resistance
Many factors combine to determine the useful life of a cable tie material and none
is as important as chemical exposure. Various chemicals will have different
effects on plastics depending on such things as chemical concentrations,
temperature, stress and ultraviolet light. Table C is an excellent guideline for the
selection of the best cable tie material. It should be noted that the exposure
temperature for this chemical resistance chart is 70°F.
Resistance of PANDUIT ® Cable Tie Materials to Chemical Attack at 70°F
— = Not Tested
E = Excellent
S = Satisfactory
B = Slight Attack
U = Attacked
2
Percent
Concentration
*
Nylon
6.6
Nylon
12
Polypropylene
TEFZEL***
Acetaldehyde
90
S
—
B
E
Acetic Acid
97
U
U
E
E
Acentic Acid
10
B
S
E
E
E
E
E
Acetic Anyhdride
90
—
S
E
E
E
E
E
Acetone
100
E
E
E
E
E
E
E
Acetophenone
100
—
—
S
E
E
E
E
Acetylene
100
—
—
E
E
E
E
E
Aluminum Chloride
10
S
E
E
E
E
U
B
Aluminum Fluoride
10
S
E
E
E
E
U
B
Aq. C.S.
—
E
E
E
E
E
E
Aluminum Potassium Sulfate
10
S
E
E
E
E
E1
E
Ammonia
All
—
E
E
E
E
E
E
1 to 5
—
E
—
E
E
E
E
Agent
Aluminum Hydroxide
Ammonium Carbonate
HALAR**
304
Stainless
Steel
316
Stainless
Steel
E
—
—
E
E
E
10 to 25
U
E
E
E
E
E1
E
Ammonium Hydroxide
10
E
—
—
E
E
—
—
Ammonium Nitrate
100
—
E
E
E
E
E
E
Ammonium Sulfate
10
—
E
E
E
E
E1
E1
Amyl Acetate
100
—
—
B
E
E
E
E
Aniline
100
—
S
E
E
E
E
E
Ammonium Chloride
Antimony Trichloride
All
U
—
E
E
E
E
E
1 to 80
—
—
E
E
E
E
E
Barium Carbonate
All
—
E
E
E
E
E
E
Barium Chloride
All
—
E
E
E
E
E1
E
Barium Sulfate
All
—
E
E
E
E
E
E
Barium Sulfide
All
—
E
E
E
E
E
E
Benzene
100
E
E
B
E
E
E
E
Benzoic Acid
100
U
E
E
E
E
E
E
Benzoyl Chloride
100
—
—
B
E
E
—
—
Benzyl Alcohol
100
—
—
E
E
E
—
—
Boric Acid
All
U
E
E
E
E
S
—
U
Arsenic Acid
Bromine
100
U
U
U
E
E
U
Butadiene
100
—
—
B
E
E
E
E
Butane
100
—
E
E
E
E
E
E
Butanediol
100
—
—
E
E
E
—
—
Butyl Acetate
100
—
E
B
E
E
—
—
N. Butyl Alcohol
100
—
E
E
E
E
E
E
Butyl Phthalate
100
—
—
E
E
E
—
—
—
Butyraldehyde
70
(NOTE 1) = Pitting occurs under some conditions
(NOTE 2) = Attack may occur if sulfuric acid present
Aq. = Aqueous
C.S. = Cold Saturated
1
100
—
—
E
E
E
—
Butyric Acid
10 to 100
U
—
E
E
E
E
E
Calcium Carbonate
Aq. C.S.
—
—
E
E
E
E
E
Calcium Chlorate
Aq. C.S.
—
—
E
E
E
E
E
Calcium Chloride
5
B
E
E
E
E
E1
E1
Most commonly used parts appear in BOLD.
*Includes all 6.6 Nylons (such as Weather Resistant, Heat Stabilized and Flame Retardant).
**HALAR is a registered trademark of Solvay Solexis, Inc.
***TEFZEL is a registered trademark of E. I. DuPont de Nemours Co.
Chemical Resistance
Table C — (cont.)
Resistance of PANDUIT ® Cable Tie Materials to Chemical Attack at 70°F
Percent
Concentration
*
Nylon
6.6
Nylon
12
Polypropylene
TEFZEL***
Calcium Hydroxide
50
—
—
E
E
E
E
E
Calcium Hypochlorite
2
U
—
E
E
E
E1
E1
Calcium Nitrate
50
—
E
E
E
E
—
—
Calcium Sulfate
2
B
—
E
E
E
E
E
Carbon Tetrachloride
100
E
E
U
E
E
E
E
Carbon Tetrachloride
Aq. 10
—
—
—
—
E
B1
E1
Agent
HALAR**
304
Stainless
Steel
316
Stainless
Steel
Chlorine
Dry
—
U
U
E
E
B
B
Chlorine
Wet
—
U
B
E
E
U
U
10 to 50
U
—
E
E
E
U
B
100
—
B
E
E
E
—
—
Chloroacetic Acid
Chlorobenzene
Chloroform
100
E
B
B
E
E
E
E
Chlorosulphonic Acid
10 to 100
U
U
U
S
E
U
U
Chromic Acid
10 to 50
U
U
E
E
E
B
B
Citric Acid
10 to 50
S
S
E
—
E
E
E
E1 to B1
Copper Chloride
1 to 10
U
—
E
E
E
E1 to U
Copper Cyanide
Aq. C.S.
—
—
E
E
E
E
E
Copper Nitrate
50
—
—
E
E
E
E
E
Cresol
100
U
U
—
E
E
E
E
Crotonaldehyde
100
—
—
E
E
E
—
—
Cyclohexane
100
—
E
B
E
E
E
—
Cyclohexanol
100
—
E
E
E
E
E
—
Cyclohexanone
100
—
E
B
E
E
E
—
Dibutyl Phthalate
100
—
—
E
E
E
—
—
Dichloroethane
100
—
—
E
—
E
E
E
Dichloroethylene
100
—
—
B
E
E
—
—
Diesel Fuel
100
—
E
B
E
E
E
E
Diethyl Ether
100
—
E
E
E
E
E
E
Aq.C.S.
—
—
E
E
E
—
—
100
—
—
E
E
E
—
—
Dimethyl Amine
100
—
—
E
E
E
—
—
Dimethyl Formamide
100
—
E
E
E
E
E
—
Dimethyl Sulfate
100
—
—
B
E
E
—
—
Dioctyl Phthalate
100
—
—
E
E
E
E
—
1, 4-Dioxane
100
—
S
B
E
E
E
—
Ethyl Acetate
100
E
E
S
E
E
E
E
Ethyl Alcohol
100
E
E
E
E
E
E
E
Ethyl Chroride
100
—
—
B
E
E
E
E
Ethylene Chloride
100
E
B
B
E
E
E
E
Ethylene Glycol
100
E
E
E
E
E
E
E
Ethylene Oxide
100
—
—
B
E
E
—
—
Fatty Acids
100
—
—
E
E
E
—
—
Ferric Chloride
50
U
—
E
E
E
U
U
Ferric Hydroxide
All
—
—
E
E
E
E
E
Ferric Nitrate
All
—
—
E
E
E
E
E
Aq. C.S.
U
—
E
E
E
U
B
Ferrous Sulfate
10
—
—
E
E
E
E1
E
Fluorine (Dry)
100
—
—
U
E
—
U
U
E
Diglycolic Acid
Disobutyl Ketone
Ferrous Chloride
Formaldehyde
40
E
S
E
E
E
E1
Formic Acid
All
U
U
E
E
E
E
E
Freons
100
E
—
—
E
E
—
—
Fuel Oil
100
—
E
—
E
E
E
E
Furfural
100
E
—
—
E
E
E
E
E
Gallic Acid
Aq. C.S.
—
—
—
E
E
E
Gasoline
100
E
—
B
E
E
E
E
Glycerin
100
—
E
E
—
E
E
E
*Includes all 6.6 Nylons (such as Weather Resistant, Heat Stabilized and Flame Retardant).
**HALAR is a registered trademark of Solvay Solexis, Inc.
***TEFZEL is a registered trademark of E. I. DuPont de Nemours Co.
Most commonly used parts appear in BOLD.
71
Chemical Resistance
Table C — (cont.)
Resistance of PANDUIT ® Cable Tie Materials to Chemical Attack at 70°F
Percent
Concentration
*
Nylon
6.6
Nylon
12
Polypropylene
TEFZEL***
Glycolic Acidb
40
U
—
E
E
Heptane
100
—
E
E
E
Hexane
100
—
E
E
E
E
E
E
Hydrobromic Acid
All
U
U
E
E
E
U
U
U
Agent
HALAR**
304
Stainless
Steel
316
Stainless
Steel
E
—
—
E
E
E
Hydrochloric Acid
All
U
U
E
E
E
U
Hydrocyanic Acid
All
—
U
E
E
E
B
B
Hydrofluoric Acid
All
U
U
E
E
E
U
U
Hydrofluorosiliac Acid
30
—
U
E
E
E
U
U
Hydrogen Peroxide
30
U
S
S
E
E
S
E
Hydrogen Sulfide
Dry
—
—
E
E
E
E
E
Hydrogen Sulfide
Wet
U
—
E
E
E
B2
E2
Hydroquinone
100
—
—
E
E
E
—
—
Iodine
100
—
—
E
E
E
U
U
Iodoform
100
—
—
—
E
E
E
E
Isopropyl Alcohol
100
E
E
E
E
E
E
E
Jet Fuel
100
E
—
E
E
E
E
E
Lactic Acid
10
E
S
E
E
E
E
E
Lanolin
10
E
E
E
E
E
E
E
Aq. C.S.
—
—
E
E
E
E
E
100
E
E
E
E
E
E
E
Magnesium Carbonate
Aq. C.S.
—
E
E
E
E
E
E
Magnesium Chloride
Aq. C.S.
B
E
E
E
E
E1
E1
Magnesium Nitrate
Lead Acetate
Linseed Oil
Aq. C.S.
—
E
E
E
E
E
E
Maleic Acid
100
—
—
E
E
E
—
—
Malic Acid
Aq. C.S.
—
—
E
E
E
E
E
Dilute
—
E
E
E
E
U
U
Mercury
100
—
E
E
E
E
E
E
Methyl Alcohol
100
E
E
E
E
E
E
E
Methyl Bromide
100
—
—
U
E
E
—
—
Methyl Chloride
100
—
—
B
E
E
—
E
Methyl Chloroform
100
E
—
B
E
E
—
—
Methyl Ethyl Ketone
100
—
E
B
E
E
E
E
Methyl Isobutyl Ketone
100
E
—
B
E
E
E
E
Methylene Chloride
100
B
U
B
E
E
E
E
Naptha
100
—
—
E
E
E
E
E
Mercuric Chloride
Naphthalene
100
—
S
E
E
E
E
E
Nickel Chloride
Aq. C.S.
—
E
E
E
E
E1
E1
Nickel Sulfate
Aq. C.S.
—
E
E
E
E
E1
E1
Nitric Acid
10 to 30
U
U
E
E
E
E
E
Nitric Acid
30 to 68
U
U
U
S
E
E
E
Nitro Benzene
100
—
B
B
E
E
E
E
Nitro Methane
100
E
—
—
E
E
—
—
5
—
—
—
E
E
E
E
Oleic Acid
100
—
B
E
E
E
E
E
Oxalic Acid
10
—
B
E
E
E
E
E
Oxygen
All
—
—
E
E
E
—
—
Paraffin
100
E
E
E
E
E
E
E
Perchlorethylene
100
—
—
B
E
E
E
E
Petroleum Ether
100
—
E
E
E
E
E
E
Phenol
90
U
U
E
E
E
E
E
Phosphoric Acid
10
U
U
E
E
E
E
E
Phosphorus Pentoxide
100
—
U
E
E
E
—
—
Phosphorus Trichloride
100
—
U
B
E
E
E
E
Phthalic Acid
50
—
—
B
E
E
E
E
Pictic Acid
1
—
—
E
E
E
E
E
Nitrous Acid
72
Most commonly used parts appear in BOLD.
*Includes all 6.6 Nylons (such as Weather Resistant, Heat Stabilized and Flame Retardant).
**HALAR is a registered trademark of Solvay Solexis, Inc.
***TEFZEL is a registered trademark of E. I. DuPont de Nemours Co.
Chemical Resistance
Table C — (cont.)
Resistance of PANDUIT ® Cable Tie Materials to Chemical Attack at 70°F
Percent
Concentration
*
Nylon
6.6
Nylon
12
Polypropylene
TEFZEL***
1
—
—
E
E
E
—
—
Potassium Bromide
Aq. C.S.
—
—
E
E
E
E1
E1
Potassium Carbonate
Aq. C.S.
—
B
E
E
E
E
E
Potassium Chlorate
Aq. C.S.
—
S
E
E
E
E
E
Potassium Chloride
5
—
E
E
E
E
E1
E1
Agent
Potassium Borate
Potassium Dichromate
Potassium Ferrocyanide
Potassium Hydroxide
HALAR**
304
Stainless
Steel
316
Stainless
Steel
Aq. C.S.
—
U
E
E
E
E
E
25
—
—
E
E
E
E
E
30
B
—
E
E
E
B
B
Potassium Iodide
Aq. C.S.
—
E
E
—
E
E
E
Potassium Nitrate
Aq. C.S.
—
E
E
E
E
E
E
1
—
—
E
E
E
—
—
Potassium Perchlorate
Potassium Permanganate
5
U
U
E
E
E
E
E
Potassium Persulfate
All
—
—
E
E
E
—
—
Potassium Sulfate
Aq. C.S.
—
E
E
E
E
E
E
Potassium Sulfide
Aq. C.S.
—
—
E
E
E
E
E
50
—
—
E
E
E
—
—
E
Propionic Acid
Propyl Alcohol
100
E
—
E
E
E
E
Pyridine
100
—
E
B
E
E
B
B
Sea Water
100
—
E
E
E
E
E1
E
Aq. C.S.
—
E
E
E
E
U
U
10
—
E
E
E
E
E
E
Aq. C.S.
E
—
E
E
E
E1
E
Sodium Benzoate
Aq. C.S.
—
—
E
E
E
—
—
Sodium Bicarbonate
Aq. C. S.
E
E
E
E
E
E
E
Sodium Bisulfate
10
—
—
E
E
E
E
E
Sodium Bisulfite
Aq. C.S.
—
S
E
E
E
E
E
Sodium Borate
Silver Chloride
Silver Nitrate
Sodium Acetate
Aq. C.S.
—
—
E
E
E
E
E
Sodium Carbonate
2
E
E
E
E
E
E
E
Sodium Chlorate
25
—
B
E
E
E
E
E
Sodium Chloride
10
E
E
E
E
E
E1
E1
Sodium Chromate
Aq. C.S.
U
—
E
E
E
E
E
Sodium Fluoride
5
—
—
E
E
E
E1
E1
Sodium Hydroxide
10
E
E
E
E
E
E
E
Sodium Hypochlorite
5
S
B
E
E
E
B1
E1
Sodium Hyposulfite
E
Aq. C.S.
—
—
—
E
E
E
Sodium Nitrate
5
E
E
E
E
E
E
E
Sodium Nitrite
Aq. C.S.
—
B
E
E
E
E
E
Sodium Perborate
Aq. C.S.
—
S
E
E
E
—
B
Sodium Perchlorate
10
—
—
—
E
E
E
E
Sodium Phosphate
5
—
E
E
E
E
E
E
Sodium Sulfate
5
—
E
E
E
E
E
E
Sodium Sulfide
5
—
E
E
E
E
E1
E
Sodium Thiosulfate
25
—
E
E
E
E
E2
E2
Stannic Chloride
Aq. C.S.
U
—
E
E
E
U
B
Stannous Chloride
Aq. C.S.
—
E
E
E
E
B
S
Stearic Acid
100
—
B
E
E
E
E
E
Succinic Acid
100
—
S
E
E
E
—
—
Sulfur
100
—
E
E
E
E
S
B
Sulfer Dioxide
All
U
—
B
E
E
E
E
Sulfuric Acid
5
U
B
E
E
E
B
E
Sulfuric Acid
50
U
U
E
E
E
U
B
Sulfuric Acid
Concentrate
U
U
B
E
E
B
B
*Includes all 6.6 Nylons (such as Weather Resistant, Heat Stabilized and Flame Retardant).
**HALAR is a registered trademark of Solvay Solexis, Inc.
***TEFZEL is a registered trademark of E. I. DuPont de Nemours Co.
Most commonly used parts appear in BOLD.
73
Chemical Resistance
Table C — (cont.)
Resistance of PANDUIT ® Cable Tie Materials to Chemical Attack at 70°F
Agent
Sulfurous Acid
Percent
Concentration
*
Nylon
6.6
Nylon
12
Polypropylene
TEFZEL***
10
E
—
E
E
HALAR**
304
Stainless
Steel
316
Stainless
Steel
E
B1
E1
Tannic Acid
10
—
E
E
E
E
E
E
Tartaric Acid
50
—
S
E
E
E
E
E
Tetrahydrofuran
100
—
B
B
E
E
E
E
Toluene
100
E
E
B
E
E
E
E
Trichloroacetic Acid
10
U
—
S
E
E
U
U
Trichloroethylene
100
—
U
B
E
E
E1
E1
Turpentine
100
—
S
U
E
E
E
E
Urea
50
—
E
E
E
E
—
—
Vinyl Acetate
100
—
—
E
E
E
—
—
Xylene
100
E
—
U
E
E
E
E
Zinc Chloride
70
U
E
E
E
E
E
E
Zinc Nitrate
Aq. C.S.
—
E
E
E
E
E
E
Zinc Sulfate
Aq. C.S.
—
E
E
E
E
E
E
74
Most commonly used parts appear in BOLD.
*Includes all 6.6 Nylons (such as Weather Resistant, Heat Stabilized and Flame Retardant).
**HALAR is a registered trademark of Solvay Solexis, Inc.
***TEFZEL is a registered trademark of E. I. DuPont de Nemours Co.
Quality
The owner-operator concept makes
employees responsible for their
areas of the manufacturing process.
PANDUIT ® Total Quality
Assurance (TQA) initiative
spans more than two
decades. During that time we
have furnished quality training
to all levels of our employees,
enabling them to participate
in our Excellence Through
Quality (ETQ) program
of continuous
quality improvement.
Our quality policies and major
improvement projects are
chosen and monitored by the
Corporate Process
Improvement Committee. This
group is comprised of the top
management representatives
from each of PANDUIT ®
business segments.
Operator inspection is an important
PANDUIT ® TQA procedure.
PANDUIT ® Engineering and
Manufacturing groups work
together to design quality into
the products and the
production processess.
Service quality is equally
important and our customer
service group takes the lead
in assuring superior
performance from the
supporting departments.
Our high degree of product and
service quality is due in part to
heavy investment in technology
by PANDUIT ®. However, people
are really the foundation for our
quality achievements. We believe
in Quality at the Source.
By introducing Quality at the
Source throughout the company,
we have provided the training,
supplied the necessary
equipment and moved the
responsibility for performance to
the employees doing the work.
Their pride in product and service
is demonstrated every day in how
we serve our customers.
PANDUIT ® ISO 9001 and
QS-9000 registrations serve
notice to our customers that we
support their business through
our reliable quality systems.
When necessary to meet the
needs of specific industries, we
incorporate additional quality
requirements in our systems.
At PANDUIT ®, our commitment is
Total Quality Assurance.
Members of ETQ Teams search for
ways to improve product quality.
Most commonly used parts appear in BOLD.
75
Merchandising
PANDUIT ® Products are on Display at Your
Local PANDUIT ® Distributor
Your local PANDUIT ® Distributor carries top quality PANDUIT ® products and
offers many advantages and services to help lower your transaction costs:
• Local stock for fast
delivery and “Just-InTime” requirements.
Reduces your
inventory costs.
76
Most commonly used parts appear in BOLD.
• One stop for all your
electrical needs because
he stocks products from
many manufacturers.
One purchase order, less
administrative and
freight costs.
• Well trained personnel to
answer any questions
and to make sure you
have the right product for
the right job.
Stainless Steel Cable Ties and Accessories
PAN-STEEL® Self-Locking Stainless Steel Ties
PANDUIT ® NO-S LIP ™ line of Stainless Steel Self-Locking Ties have a unique low-insertion force
head design that keeps the tie locked, before or after tightening, regardless of its orientation or
how tightly it is installed. With features like high strength, corrosion resistance, extreme
temperature tolerance, fully rounded edges and special styles, these stainless steel ties are an
excellent choice for a wide variety of applications and are designed to install easily for long
service life under adverse conditions. All ties can be installed using PANDUIT ® standard
installation tools, or simply installed by hand.
Ties —
Standard Sizes
Standard,
Light Heavy
and Heavy
Banding System
• Fully rounded edge
design eliminates sharp
edges for added protection
and safety
• Available in a loop tensile
strength of 200 lbs. for
standard cross-section
ties, 250 lbs. for light
heavy cross section ties
and 450 lbs. for heavy
cross section ties
• Superior strength for most
bundling applications
• Available in type 304 and
316 stainless steel which
provides excellent
resistance to temperature
extremes, corrosion,
weather and UV radiation
• For applications
that require
bundling various
bundle diameters
• Provides versatility on
job sites for any
diameter with
minimum inventory
• 304 Stainless Steel
(316 available)
WAVE-TY ™ Superior Grip Steel Ties
• Loop tensile strength
of 450 lbs. Provides
superior strength for
increased performance
and reliability
• Available in 304 and
316 stainless steel
• The unique wave-form spring maintains a high
tension grip on non-resilient objects; provides the
strength of steel and the high tension of a
steel spring
Coated Stainless Steel Ties
Part Number
MLT1S-CP
MLT2S-CP
MLT2.7S-CP
MLT4S-CP
MLT6S-CP
MLT8S-CP
MLT2LH-LP
MLT4LH-LP
MLT6LH-LP
MLT8LH-LP
MLT2H-LP
MLT4H-LP
MLT6H-LP
MLT8H-LP
MLT10H-LP
MLT12H-Q
Max. Bundle
Dia.
In. (mm)
1.00 (25)
2.00 (51)
2.70 (69)
4.00 (102)
6.00 (152)
8.00 (203)
2.00 (51)
4.00 (102)
6.00 (152)
8.00 (203)
2.00 (51)
4.00 (102)
6.00 (152)
8.00 (203)
10.00 (254)
12.00 (305)
Length
In. (mm)
5.0 (127)
7.9 (201)
10.2 (259)
14.3 (362)
20.5 (521)
26.8 (679)
7.9 (201)
14.3 (362)
20.5 (521)
26.8 (679)
7.9 (201)
14.3 (362)
20.5 (521)
26.8 (679)
33.0 (838)
42.0 (1067)
Width
In. (mm)
Min. Loop
Tensile
Strength
Lbs. (N)
.18
(4.6)
200
(890)
.25
(6.4)
250
(1112)
.31
(7.9)
450
(2000)
.18
(4.6)
100
(445)
.31
(7.9)
.18 (4.6)
.31 (7.9)
Std.
Pkg.
Qty.*
100
100
100
100
100
100
50
50
50
50
50
50
50
50
50
25
Std.
Ctn.
Qty.
500
500
500
500
500
500
250
250
250
250
250
250
250
250
250
125
250
(1112)
1
1
1
1
n/a
n/a
n/a
n/a
100 (445)
250 (1112)
100
100
1000
1000
50
250
50
250
50
250
50
250
50
250
50
50
50
50
50
250
250
250
250
250
CUSTOM LENGTH BANDING SYSTEM
MBS-TLR
MBS-MR
MBH-TLR
MBH-MR
Any
Any
250'
1000'
250'
1000'
(76m)
(305m)
(76m)
(305m)
BANDING HEADS
MTHS-C
MTHH-C
n/a
n/a
n/a
n/a
*Order the number of reels required in multiples of standard package quantities.
WAVE -TY ™
MLT2.7WH-LP
MLT4WH-LP
MLT6WH-LP
MLT8WH-LP
MLT10WH-LP
2.70
(69)
4.00
(102)
6.00
(152)
8.00
(203)
10.00
(254)
10.2
(259)
14.2
(360)
20.4
(520)
26.8
(679)
33.0
(838)
.31
(7.9)
450
(2000)
*Order the number of ties required in multiples of standard package quantities.
NYLON 11 COATED 316 STAINLESS STEEL
MLTC2H-LP316
2.00 (50)
MLTC4H-LP316 4.00 (102)
• For communication and
MLTC6H-LP316
6.00 (152)
electrical cable
MLTC8H-LP316
8.00 (203)
• The strength of steel, the
MLTC10H-LP316
10.00 (254)
protection of nylon; the
nylon coating provides
fully rounded plastic edges to protect cables
• Available with a loop tensile strength of 250 lbs.
• Base metal is 316 grade stainless steel for
excellent resistance to temperature extremes,
corrosion, weather, chemicals, salt sprays and
UV radiation
7.9 (201)
14.2 (360)
20.4 (520)
26.8 (679)
33.0 (838)
.31
(7.9)
250
(1112)
For more complete information on Stainless Steel Products, see PANDUIT ® Brochure SA-SSCB01.
Most commonly used parts appear in BOLD.
77
Stainless Steel Mounts and Marking Products
Installation Tools
• Complete line of
manual and pneumatic
installation tools
speeds installation
• Side-entry of cable ties
into the tools, makes for
quick and easy
installation
• Automatic tension and
cut-off capabilities
available on
select models
• High reliability, low
maintenance, long life
Part Number
Std.
Pkg.
Qty.*
Description
PPTMT
Pneumatic-operated, tool controlled tension and cut-off
for production applications.
1
GS4MT
MIL approved. Hand-operated, tool controlled tension
and cut-off.
1
K4M-BLD
Replacement cutter blade for GS4MT.
1
K4MTG
Replacement tension gripper for GS4MT.
1
ST2MT
Hand-operated, installer controlled tension and cut-off.
1
KT2MG
Replacement tension gripper for ST2MT.
1
HTMT
Used to tension and coil the tail of tie.
1
*Order the number of tools required in multiples of standard package quantities.
PAN-STEEL® Accessories
Cushion Sleeve
• Makes rigid bundles
resilient, provides
tighter tensioning
• Non-conductive
insulator between
clamp and bundle
• Material: black, neoprene
Part Number
For Clamp
Width
In. mm
Sleeve
Width
In. (mm)
PCSS-B-CR
.18 (4.6)
.33 (8.4)
1
—
PCSH-B-CR
.31 (7.9)
.47 (12)
1
—
Std.
Pkg.
Qty.*
Std.
Ctn.
Qty.
Bulk Pkg. -CR = 100' reel
*Order the number of reels required in multiples of standard package quantities.
Stainless Steel Mounts
Mount
• Low profile
• Utilizes only one hole
for mounting
• Material: 304
Stainless Steel
Part Number
MTM1H-C
Push-Button Mount
MBM-H25-Q
Mounting
Method
Hole
Diameter
In. (mm)
Std.
Pkg.
Qty.*
Std.
Ctn.
Qty.
#8 (4) Screw
.18 (4.6)
100
1000
#10 (5) Screw
.21 (5.4)
100
1000
MTM1H25-C
.18 (4.6)
thru
.31 (7.9)
1/4” (6) Screw
.28 (7.1)
100
1000
Part Number
For MLT
Tie Width
In. (mm)
Mounting
Method
In. (mm)
Panel
Thickness
In. (mm)
Std.
Pkg.
Qty.*
Std.
Ctn.
Qty.
MPWM-H56
.18 (4.6)
thru
.31 (7.9)
Inserted into
pre-drilled hole
5/16 (8)
.031 (.8).094 (2.4)
25
250
MBM-H25-Q
.18
(4.6)
Inserted
into pre-drilled
hole .250 (6.4)
.031 (.8).125 (3.2)
25
250
MTM2H-Q
.18 (4.6) thru
.31 (7.9)
#8 (4) Screw
—
25
250
MTMBH-Q
.18 (4.6)
thru
.31 (7.9)
Pre-drill hole size
Max. size
.625 (15.9)
Up to .500 max.
(12.7)
25
250
MTM1H10-C
Stainless Mount
MTM1H-C
Push-Wing Mount
MPWM-H56-Q
For MLT
Tie Width
In (mm)
Material: 304 Stainless Steel
*Order the number of pieces required in multiples of standard package quantities.
Two-Way Mount
MTM2H-Q
Bulkhead Mount
MTMBH-Q
Stainless Steel Marking Products
Use PAN -S TEEL ® Ties or Stainless Steel Strapping to provide identification in harsh environments. The ties and
strapping can be stamped with available tooling or custom stamped upon request. Marker plates and metal embossed
tape are also available.
Marker Plates
and Tags
78
• Attached with PAN-STEEL ® T ies
• 304, 316 stainless steel, brass and
aluminum available
• Can be used as a flag or wrap
• Various sizes and shapes available;
round, square, rectangular, etc.
Part numbers available upon request
• Can be custom marked by
PANDUIT ® . See page 79 for details
Used with
Clamp/Tie
Width
In. (mm)
Width
MMP350-C
.18 (4.6)
.75 (19)
MMP350W38-C
.18 (4.6)
.18 (4.6) thru
.31 (7.9)
Part Number
MMP350H-C
Size - In. (mm)
Length
Std.
Pkg.
Qty.*
Std.
Ctn.
Qty.
3.50 (89)
100
1000
.38 (10)
3.50 (89)
100
1000
.75
(19)
3.50
(89)
100
1000
*Order the number of pieces required in multiples of standard package quantities.
For more complete information on Stainless Steel Products, see PANDUIT ® Brochure SA-SSCB01.
Most commonly used parts appear in BOLD.
Stainless Steel Marking Products
Metal Embossed Tape System
• Hand operated embosser
with 3/16" height characters
(approx. 6 characters/inch)
• Hole punch (3/16" dia.)
allows tape to be used as a
wrap or flag marker, held on
with PAN-STEEL ® Ties
Characters include:
A B C D E F G H I J K L M
N O P Q R S T U V W X Y Z
2 3 4 5 6 7 8 9 . / -
Std.
Pkg.
Qty.*
Std.
Ctn.
Qty.
Embosser, carrying case, (1) roll each of
META and METS4 tape.
1
—
META-X
1/2” x 16'. roll Aluminum tape.
10
50
METS3-X
1/2" x 21' roll Stainless Steel (316 Grade).
10
50
METS4-X
1/2" x 21' roll Stainless Steel (304 Grade).
10
50
Part Number
MEHT
Description
TAPE
*Order the number of pieces required in multiples of standard package quantities.
3/8" height (approx. 6 characters per inch).
Indenter Press
• For medium volume marking
of ties, strapping or plates
• Manual operation with
automatic indexing
• Interchangeable character
wheel makes the press
versatile and economical
• Press includes fixturing
device to
provide high quality marking
Characters include:
A B C D E F G H I J K L M N
O P Q R S T U V W X Y Z
& 1 2 3 4 5 6 7 8 9 0 . / -
Part Number
Description
Std.
Pkg.
Qty.*
IMP094
IMP125
IMP187
Press with 3/32" character wheel.
Press with 1/8" character wheel.
Press with 3/16" character wheel.
1
1
1
MWK094
MWK125
MWK187
3/32" character wheel kit.
1/8" character wheel kit.
3/16" character wheel kit.
1
1
1
IMP-FIX
Interchangeable fixture for MMP172 series.
MT series and the aluminum marker plates.
1
*Order the number of pieces required in multiples of standard package quantities.
Custom Marking Capabilities on PANDUIT ® P AN-STEEL® Stainless Steel
Cable Ties, Strapping, Metal Marker Plates/Tags Anodized Aluminum Locks.*
PANDUIT ® stainless steel cable ties, strapping, stainless steel, brass and aluminum
marker plates/tags and anodized aluminum locks can be custom marked for
identification of equipment, cables, hoses, pipes, conduit, etc. in petrochemical
plants, power plants, pulp and paper mills, breweries, and many other applications.
PANDUIT ® in-house computer controlled custom marking systems provide sharp,
crisp, high quality legends. Sequential numbering for serialization is available.
*Anodized aluminum locks can only be marked by the laser system.
Laser Marking System:
Embossing System:
• Used on all stainless steel cable ties, strapping,
metal marker plates/tags and anodized
aluminum locks
• Graphics capability and BOLD block letters
• Upper and lower case character capability
• Alphanumeric and sequential numbering ability
• Used on metal marker plates and tags which
are a maximum of .020" (0.5mm) thick
• Excellent for applications that are exposed
to occasional painting and excessive dirt
• Upper case “raised” character
capability only
• Alphanumeric and sequential
numbering ability
Character Sizes ** Available:
• 1/8" (3.18mm)
• 1/4" (6.35mm)
• 3/16" (4.77mm)
• 5/16" (7.94mm)
• 1/2" (12.7mm)
Character Sizes ** Available:
• 1/8" (3.18mm)
• 3/16" (4.77mm)
**Other character sizes available. For complete product information, specification or character information, contact 866-405-6659.
For more complete information on Stainless Steel Products, see PANDUIT ® Brochure SA-SSCB01.
Most commonly used parts appear in BOLD.
79
Stainless Steel Strapping System
•
•
•
•
Reduces installation time and leaves no sharp edges
Burr-free sides
304 Stainless Steel
Designed for use in critical applications where radiation, weathering, corrosion
and temperature extremes are a concern
• Temperature range: -112°F (-80°C) to 1000°F (538°C)
• Fast and reliable alternative to wing seals
Stainless Steel
Strapping
Part Number
Min. Loop
Tensile
Width
Strength
in. (mm) lbs. (N)
Thickness
in. (mm)
Max.
Bundle
Dia.
in. (mm)
Length
in. (mm)
Recommended
PANDUIT ®
Installation
Tool Part No.
Std.
Pkg.
Qty.*
Std.
Ctn.
Qty.
MS2W38T15-L4
MS4W38T15-L4
MS6W38T15-L4
MS8W38T15-L4
MS10W38T15-L4
.015
(.38)
.38
(9.5)
500
(2225)
2.00 (51)
4.00 (102)
6.00 (152)
8.00 (203)
10.00 (254)
11.8
18.0
24.4
30.7
37.0
(300)
(457)
(620)
(780)
(940)
BT1HT or
BT2MS75
50
50
50
50
50
250
250
250
250
250
MS4W50T15-L4
MS6W50T15-L4
MS8W50T15-L4
MS10W50T15-L4
.015
(.38)
.50
(12.7)
700
(3115)
4.00 (102)
6.00 (152)
8.00 (203)
10.00 (254)
18.0
24.4
30.7
37.0
(457)
(620)
(780)
(940)
BT1HT or
BT2MS75
50
50
50
50
250
250
250
250
MS4W63T15-L4
MS6W63T15-L4
MSW63T15-L4
MS10W63T15-L4
.015
(.38)
.63
(15.9)
800
(3560)
4.00 (102)
6.00 (152)
8.00 (203)
10.00 (254)
18.0
24.4
30.7
37.0
(457)
(620)
(780)
(940)
BT1HT or
BT2MS75
50
50
50
50
250
250
250
250
*Order the number of strapping, and buckles required in multiples of standard package quantities.
The PANDUIT ® Method Reduces Installation Time:
1. Place strap around the
material, insert tail of strap
through buckle. Pull
strapping tight and bend up
to hold in place. Insert tail
of strapping into tool nose
section. Squeeze handles
to tension.
2. Once proper tension is
reached, maintain tension
and raise tool 90°-120°
over buckle and pull
down on cutter lever,
cutting strap.
3. Remove tool, press cut
end down and toward
retaining tab.
Custom Length Strapping System
• Provides job-site
versatility with
minimum inventory
• Gives custom
capability on larger
diameters
• 304 stainless steel
• Buckle is easy to
install—just slip onto
strapping and turn
strapping back
on bundle
Part Number
Thickness
In. (mm)
4. Using the closure level on the handle of the tool, bend
retaining tab down and over cut end. Provides finished,
safe, low profile closure.
Approx.
Width
In. (mm)
Used
With
Buckle
Std.
Pkg.
Qty.*
Std.
Ctn.
Qty.
STRAPPING
MSW38T15-CR4
.015 (.38)
.38 (9.5)
MSBW38-C4
1*
—
MSW50T15-CR4
.015 (.38)
.50 (12.7)
MSBW50-C4
1*
—
MSW63T15-CR4
.015 (.38)
.63 (15.9)
MSBW63-C4
1*
—
1000
BUCKLES
MSBW38-C4
Used with .38" width strapping.
100
MSBW50-C4
Used with .50” width strapping.
100
1000
MSBW63-C4
Used with .63" width strapping.
100
1000
*Order the number of strapping, and buckles required in multiples of standard package quantities.
Installation Tools
Part Number
BT1HT
Hand operated tool. Adjustable
tension control and lever
actuated cut-off.
80
Description
Installation tool. Used for all widths of PANDUIT ® PAN-STEEL®
strapping. Tensions, cuts strapping, and secures the buckle tab.
Ratchet-type tool provides mechanical advantage for tensioning.
Easy to operate.
Std.
Pkg.
Qty.*
1
*Order the number of pieces required in multiples of standard package quantities.
For more complete information on Stainless Steel Products, see PANDUIT ® Brochure SA-SSCB01.
Most commonly used parts appear in BOLD.
Wiring Accessories
Wire Management
Push Mounts
Snap-In Clips
Communication Cable Management
Cord Clips
Heat Shrink
Adhesive Backed Mounts
Abrasion Protection Products
Harness Board Accessories
Smart Ways to Lower Your Installed Cost
®
PANDUIT Wiring Accessories offer you a broad range of products designed to speed installation and
lower your installed costs—whatever your requirements. Plus, PANDUIT ® provides experienced technical
support to assure you get not only the best product for your application, but maximum benefit from its use.
For more information, in the U.S.A. call toll-free:
Technical Support: 866-405-6657 or Customer Service: 800-777-3300
81
Wiring Accessories
Contents
(See back of catalog for alphabetical index of part numbers referencing specific page numbers.)
Selection of Styles . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .83
Cable Tie Accessories . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 85-107
4-Way Adhesive Backed Mounts . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 85-86
4-Way Mounts Without Adhesive . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .86
Combination Adhesive Mount/Cable Tie . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .87
Adhesive Applied Mounts . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .88
Tie Mounts . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 89-92
Tie Anchor Mounts . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 93-94
Tie Plates . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .95
Right Angle Mounts/Lightening Hole Mounts . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .96
Clip-On Mounts . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .97
Push Mounts and Specialty Mounts . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 98-105
Tie Harness Mount System . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 100-101
Flat Cable Mount System . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .103
Marker Plates and Rolls/Marking Pens . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 105-106
TELCO Installation Products . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .107
Wiring Accessories — used without cable ties . . . . . . . . . . . . . . . . . . . 108-123
Adjustable Releasable Clamp . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .108
Cord Clips . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 109-113
Flat Cable Mounts . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 114-115
Fixed Diameter “C” Clamps . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 116-117
Siding Clips . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .119
Snap-in Mounts/Clips . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 120-121
Circuit Board Posts and Locking Supports . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 122-123
Harness Board Accessories . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 124-129
Communication Cable Management . . . . . . . . . . . . . . . . . . . . . . . . . . . . 130-133
Selection and Use of PANDUIT ® Adhesive Mounts . . . . . . . . . . . . . . . 134-136
Cable Management Bulk Package Part Numbers . . . . . . . . . . . . . . . . . 137-138
Abrasion Protection Products . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 139-180
Heat Shrink . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 140-161
Non-Shrink PVC Tubing . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 162-163
Spiral Wrap . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 164-167
Split Harness Wrap . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .168
Grommet Edging . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 169-171
Corrugated Loom Tubing . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 172-174
Braided Expandable Sleeving . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 175-176
Flammability Tests, Classifications, Technical Data . . . . . . . . . . . . . . . . . . . . . . . . . 177-180
Abrasion Protection Bulk Package Part Numbers. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .181
82
Most commonly used parts appear in BOLD.
Wiring Accessories
Wiring Accessories are an integral part of PANDUIT ® comprehensive selection of wire management
products. These accessories help provide the lowest installed solution to routing, mounting, protecting
wire, cable and optical fiber. These products are manufactured in an environment committed to design
innovation, high quality and knowledgeable service to our customers. The key benefits of this
commitment are:
• The highest quality manufacturing environment,
• PANDUIT ® teams up with a global network
including statistical process control to meet
of Distributors to provide you with Just In
applicable international and domestic standards
Time shipping to eliminate your need for
large inventories
• Fully staffed engineering and tool and die
departments to assist in designing solutions
to specific industry applications
• Continuous research on materials,
adhesives and new technologies to provide
you the latest product innovations
Selection of Styles
Cable Tie Accessories
These products are used with PANDUIT ® Cable Ties to speed and simplify
the mounting of wires, cables and tubing. Installation methods include
adhesive-backed, user applied adhesive, screws, rivets or through-panel
mount designs.
Wiring Accessories
These products, including fixed and adjustable diameter accessories, are
used without cable ties. Mounting methods include adhesive-backed, user
applied adhesive, screws, rivets or through-panel designs.
Harness Board Accessories
PANDUIT ® unique selection of harness board accessories speeds the routing
and forming of wire in harness fabrication. They hold wires at a uniform height
above the board and are ideal for use with PANDUIT ® manual and automatic
cable tie tooling.
Abrasion Protection Products
PANDUIT ® offers a wide variety of abrasion protection products to protect wires,
cables, hoses and tubing from abrasion. Heat shrink tubing, non-shrink PVC
tubing, spiral wrap, grommet edging, corrugated loom tubing and braided
expandable sleeving are available in a variety of sizes and materials to meet
a broad range of indoor and outdoor applications.
Most commonly used parts appear in BOLD.
83
Wiring Accessories Part Number System and Technical Data
Part Number System Example
Part Description
Package Quantity
Color/Material
—
For Part Description and
Mounting Method, refer to
specific product tables
in catalog.
Blank = Natural
0 = Weather Resistant Black
8 = Gray
15 = Ivory
20 = Pigmented Black
30 = Heat Stabilized Nylon (Black)
69 = Flame Retardant Nylon (Natural)
76 = TEFZEL* (Blue)
100 = Polypropylene Weather Resistant (Black)
109 = Polypropylene (Green)
120 = Weather Resistant Nylon 12 (Black)
630 = Heat Stabilized Nylon 6 (Black)
639 = Heat Stabilized Nylon 6 (Natural)
702 = HALAR** (Maroon)
X = 10
Q = 25
L = 50
C = 100
T = 200
D = 500
M = 1000
Physical Properties and Colors of Wiring Accessory Materials
Design Criteria
Color
Part Number Suffix
UL Flammability — UL94
Gamma Radiation Resistance
Water Absorption
UV Resistance
Maximum Continuous
Use Temperature
Minimum Continuous
Use Temperature
General Purpose
Nylon 6.6
Natural
Black
None
20
V-2
V-2
1 x 105 Rads
1 x 105 Rads
1.2%
1.2%
(24 hrs)
(24 hrs)
Poor
Fair
Weather
Resistant
Nylon 6.6
Black
0
V-2
1 x 105 Rads
1.2%
(24 hrs)
Good
Impact
Modified
Weather
Resistant
Nylon 6.6
Black
0
HB
N/A
1.2%
(24 hrs)
Good
185°F (85°C)
185°F (85°C)
185°F (85°C)
185°F (85°C)
-40°F
(-40°C)
-40°F
(-40°C)
-40°F
(-40°C)
-40°F
(-40°C)
Heat
Stabilized
Nylon 6.6
Black
30
V-2
1 x 105 Rads
1.2%
(24 hrs)
Good
Flame Retardant
Nylon 6.6
Black
Natural
60
69
V-0
V-0
1 x 105 Rads
1 x 105 Rads
1.1%
1.1%
(24hrs)
(24hrs)
Poor
Poor
Glass Filled
Flame
Retardant
Nylon 6.6
Black
None
V-0
N/A
0.7%
(24hrs)
Poor
257°F (125°C) 230°F (110°C) 230°F (110°C) 230°F (110°C)
-40°F
(-40°C)
-40°F
(-40°C)
-40°F
(-40°C)
-40°F
(-40°C)
Weather
Resistant
ABS
Black
0
Flame
Retardant
Polycarbonate
Black
None
Acetal
Black
None
PVC
Gray, White
8, 10
Physical Properties and Colors of Wiring Accessory Materials
Design
Criteria
Color
Part Number
Suffix
UL
Flammability
— UL94
Gamma
Radiation
Resistance
Water
Absorption
(24 hours)
UV
Resistance
Maximum
Continuous
Use
Temperature
Minimum
Continuous
Use
Temperature
Heat Stabilized
Nylon 6.6
Black
Natural
630
639
TEFZEL*
Blue
76
General
Purpose
Polypropylene
White
None
Weather
Resistant
Polypropylene
Black
100
Polyproplyene
(Green)
Green
109
HALAR**
Maroon
702
HB
HB
V-0
HB
HB
HB
V-0
HB
HB
HB
V-0
HB
V-0
N/A
N/A
2 x 108
Rads
1 x 106
Rads
1 x 106
Rads
N/A
2 x 108
Rads
N/A
N/A
N/A
N/A
N/A
N/A
1.5%
(24 hrs)
1.5%
(24hrs)
<0.03%
(24hrs)
0.1%
(24 hrs)
0.1%
(24hrs)
0.1%
(24hrs)
<0.05%
(24hrs)
0.3%
(24hrs)
0.3%
(24hrs)
0.3%
(24hrs)
0.15%
(24hrs)
0.43%
(24 hrs)
0.3%
(30 days)
Fair
Poor
Excellent
Poor
Good
Poor
Excellent
Poor
Fair
Good
Good
Fair
Poor
250°F
(121°C)
250°F
(121°C)
302°F
(150°C)
221°F
(105°C)
221°F
(105°C)
221°F
(105°C)
284°F
(140°C)
150°F
(65°C)
150°F
(65°C)
150°F
(65°C)
257°F
(125°C)
194°F
(90°C)
122°F
(50°C)
-40°F
(-40°C)
-40°F
(-40°C)
-50°F
(-46°C)
-40°F
(-40°C)
-40°F
(-40°C)
-40°F
(-40°C)
-50°F
(-46°C)
-40°F
(-40°C)
-40°F
(-40°C)
-40°F
(-40°C)
-40°F
(-40°C)
-40°F
(-40°C)
-40°F
(-40°C)
Based on assumption of minimal loading, chemical attack and impact free conditions.
*TEFZEL is a registered trademark of E. I. DuPont de Nemours Co.
**HALAR is a registered trademark of Solvay Solexis, Inc.
84
General Purpose
ABS
White
Black
None
20
Most commonly used parts appear in BOLD.
Adhesive Backed Cable Tie Mounts
4-Way Adhesive Backed Mounts
Lower your installed costs with fast, easy-to-install PANDUIT ®
adhesive-backed cable tie mounts. Four-way tie entry for easy
orientation of wires or cables. PANDUIT ® mounts are produced
2-up, 4-up, and with tear tabs for fast and easy liner removal to
speed installation. For additional holding strength use #6 (M3)
screws in the mounting hole(s). For specific information on
adhesive properties and technical data on mount selection,
see page 134-136.
ABM1M
ABMM
A
A
B
B
C
C
Dimensions
in. (mm)
Packaging*
Adhesive
Std.
Type/Static Pkg.
Load lbs. (g) Qty.
Std.
Ctn.
Qty.
Bulk
Pkg.
Qty.
Bulk
Ctn.
Qty.
Part Number‡
Used With
Cable Ties**
A
B
C
Material
Color
Where
Used
ABM1M-A-C
M
.50
(12.7)
.50
(12.7)
.16
(4.0)
Nylon 6.6
White
Indoors
Rubber
.13 (59)
100
500
1000
5000
ABM1M-AT-C
M
.50
(12.7)
.50
(12.7)
.16
(4.0)
Nylon 6.6
White
Indoors/
High Temp.
Acrylic
.13 (59)
100
500
1000
5000
ABMM-A-C
M, I
.75
(19.1)
.75
(19.1)
.18
(4.6)
ABS
White
Indoors
Rubber
.30 (136)
100
500
500
5000
ABMM-A-C20
M, I
.75
(19.1)
.75
(19.1)
.18
(4.6)
ABS
Black
Indoors
Rubber
.30 (136)
100
500
—
—
ABMM-AT-C
M, I
.75
(19.1)
.75
(19.1)
.18
(4.6)
ABS
White
Indoors/
High Temp.
Acrylic
.30 (136)
100
500
500
5000
ABMM-AT-C0
M, I
.75
(19.1)
.75
(19.1)
.18
(4.6)
ABS
Black
Outdoors/
High Temp.
Acrylic
.30 (136)
100
500
500
5000
*Parts shown for Std. Pkg. Qtys. Order number of mounts required in multiples of package quantities.
‡Part Numbers listed are for Standard Materials in Standard Package Quantity.
For Bulk packag e part numbers, see page 137-138.
C able tie cross section sizes: M = Miniature and I = Intermediate.
Most commonly used parts appear in BOLD.
85
Adhesive Backed Cable Tie Mounts
4-Way Adhesive Backed Mounts
A
A
A
B
B
C
ABM2S
ABM3H/ABM4H
A
B
B
C
C
ABM112
ABM100
Dimensions
in. (mm)
Part Number‡
ABM2S-A-C
Used With
Cable Ties**
A
B
Packaging*
C
Color
ABS
White
.16
(4.2)
ABM2S-AT-C0
1.00
(25.4)
ABM100-A-C
1.00
(25.4)
.23
(5.8)
M, I, S
Weather
Resistant ABS
Black
Nylon 6.6
White
Weather
Resistant
Nylon 6.6
Black
ABM112-A-C
1.12
(28.6)
1.12
(28.6)
White
.14
(4.1)
ABM112-AT-C0
Black
ABM3H-A-L
ABM4H-A-L
Indoors/
High Temp.
Outdoors/
High Temp.
Indoors
Outdoors/
High Temp.
Indoors
ABM112-AT-C
ABM3H-AT-L
Where
Used
Indoors
ABM2S-AT-C
ABM100-AT-C
ABM100-AT-C0
Material
M, I, S, HS,
LH, H,
HLM „
ABM4H-AT-L
1.50
(38.1)
Nylon 6.6
1.50
(38.1)
.25
(6.4)
2.00
(50.8)
White
2.00
(50.8)
Indoors/
High Temp.
Outdoors/
High Temp.
Indoors
Indoors
High Temp.
Indoors
Indoors/
High Temp.
Adhesive
Type/Static
Load lbs. (g)
Rubber
.50 (227)
Acrylic
.50 (227)
Rubber
.50 (227)
Acrylic
.50 (227)
Rubber
.63 (286)
Acrylic
.63 (286)
Rubber
1.12 (513)
Acrylic
1.12 (513)
Rubber
2.0 (907)
Acrylic
2.0 (907)
Std.
Pkg.
Qty.
100
Std.
Ctn.
Qty.
500
Bulk
Pkg.
Qty.
500
Bulk
Ctn.
Qty.
5000
100
500
500
5000
100
500
500
5000
100
500
500
5000
100
100
500
500
500
500
5000
5000
100
500
500
5000
100
1000
500
5000
100
1000
500
5000
50
500
200
1000
50
500
200
1000
50
500
200
1000
50
500
200
1000
Packaging*
Std. Bulk
Ctn.
Pkg.
Qty.
Qty.
—
500
Bulk
Ctn.
Qty.
5000
4-WAY MOUNTS WITHOUT ADHESIVE
Dimensions
in. (mm)
Part Number‡
ABMM-D
Used With
Cable Ties**
M, I
A
.75
(19.1)
B
.75
(19.1)
C
.14
(3.6)
ABM2S-S6-D
.16
(4.2)
ABM100-S6-C
ABM100-S6-C69
1.00
(25.4)
M,I,S
ABM112-S6-C
ABM112-S6-C69
ABM3H-S6-T
ABM4H-S6-T
1.00
(25.4)
M, I, S, HS,
LH, H,
HLM „
Material
ABS
Color
Where
Used
White
Indoors
.20
(5.1)
Nylon 6.6
Flame Retard.
Nylon 6.6
Natural
1.12
(28.6)
1.12
(28.6)
.14
(4.1)
Nylon 6.6
Flame Retard.
Nylon 6.6
White
Natural
1.50
(38.1)
2.00
(50.8)
1.50
(38.1)
2.00
(50.8)
.21
(5.2)
Nylon 6.6
White
Indoors
Adhesive
Std.
Type/Static
Pkg.
Load lbs. (g) Qty.
User supplied
—
adhesive
User supplied
—
adhesive
and/or (2)
#6 (M3) Screws
User supplied
100
adhesive
100
and/or #6 (M3)
Screw
100
100
User supplied
adhesive
—
and/or (2) #6
(M3) Screws
—
—
500
5000
1000
1000
500
500
5000
5000
1000
500
500
500
5000
5000
—
200
1000
—
200
1000
„Used with PANDUIT ® HLM series Hook & Loop Cable Ties found on page 40.
86
Most commonly used parts appear in BOLD.
*Order the number of mounts required in multiples of package quantities.
‡Part Numbers listed are for Standard Materials in Standard Package Quantity. For Bulk package part numbers, see page 137-138.
**Cable Tie Cross Section Sizes: M = Miniature, I = Intermediate, S = Standard, HS= Heavy Standard, LH = Light-Heavy and H = Heavy.
Adhesive Backed Cable Tie Mounts
Combination Adhesive Mount/Cable Tie
Adhesive mount and cable tie molded as one piece help reduce
inventory costs. Mount portion features ramp to guide tip into tie head
and holes to install two (2) optional #6 screws for added mounting
strength. Available with locking or releasable tie. Extended adhesive
liner release tab on mount for fast liner removal.
.148 (3.76)
.30
(7.6)
B
.90
(22.9)
A REF.
1.0
(25.4)
Cable Tie Specifications
Part Number‡
Locking
PLA2S-A-Q
Packaging*
Length
A
in. (mm)
Width
B
in. (mm)
Max.
Bundle Dia.
in. (mm)
Min. Loop
Tensile
Strength
Lbs. (N)
7.4
(188)
.19
(4.8)
1.85
(47)
50
(222)
Recommended
Adhesive
Type/Static
PANDUIT ®
Installation Tool Material Color Load lbs. (g)
GTS, GS2B,
PPTS, PTS,
STS2 or STH2
Releasable
PRA2S-A-Q
Nylon 6.6 White
Std.
Pkg.
Qty.
Std.
Ctn.
Qty.
Bulk Bulk
Pkg. Ctn.
Qty. Qty.
25
250
100
1000
25
250
100
1000
Rubber
.45
(204)
Hand Installed
Only
Snap-In Cable Tie Mounts
Integral retaining notch holds cable tie head in place
below bundle; eliminates protruding tie head and
facilitates one hand tie threading.
A
B
.145
(3.7)
1.12
(28.4)
C
Part Number‡
Used
With
Cable
Ties**
Dimensions
in. (mm)
Packaging*
Mounting
Method
Std.
Pkg.
Qty.*
Std.
Ctn.
Qty.
Bulk
Pkg.
Qty.
Bulk
Ctn.
Qty.
A
B
C
Material
Color
Where
Used
S
2.00
(50.8)
1.00
(25.4)
.31
(7.9)
ABS
White
Indoors
Rubber
Adhesive
Static Load
1.0 lbs.
(454g)
100
500
500
5000
S
2.00
(50.8)
1.00
(25.4)
.31
(7.9)
ABS
White
Indoors
(2) #6
(M3) Screws
—
—
500
5000
ADHESIVE BACKED
SMS-A-C
SCREW MOUNT
SMS-S6-D
*Order the number of mounts required in multiples of package quantities.
Most commonly used parts appear in BOLD.
‡Part Numbers listed are for Standard Materials in Standard Package Quantity. For Bulk package part n umbers, see page 137-138.
**Recommended cable ties: PLT1S, PLT1.5S, PLT2S, PRT1.5S, PRT2S. Cable Tie Cross Section: S = Standard.
87
Cable Tie Mounts
Epoxy Applied Mounts
These mounts are designed for application with PANDUIT ®
EMA Epoxy. Provides a fast, strong, economical method to
secure wire or cable to steel, aluminum, glass, wood and
most other surfaces. Especially well suited to construction
and maintenance applications. Eliminates the need to
drill holes.
Part Number‡
Dimensions
in. (mm)
Used
With
Cable
Ties**
A
B
C
EMS-A-C
EMS-A-C0
M, I, S
.98
(24.9)
.98
(24.9)
.26
(6.6)
Where
Used
Mounting
Method
Material
Color
Nylon 6.6
Natural
Indoors
Weather
Resistant
Nylon 6.6
Black
Outdoors
EMA
Epoxy
Max.
Static
Load
lbs. (g)z
10 (4540)
A
B
C
Packaging*
Std.
Pkg.
Qty.
Std.
Ctn.
Qty.
Bulk
Pkg.
Qty.
Bulk
Ctn.
Qty.
100
500
500
1000
100
500
500
5000
Epoxy Applied Swivel Mounts
A
Mount swivels 360° to assure proper orientation
with harness. Four inspection holes to check
adhesive coverage.
0.50"
(12.7)
B
Material:
Base and Rivet: Aluminum
Mount: Natural Nylon 6.6 — Indoors
Part Number‡
Used
With
Cable
Ties
ASMS-A-X
M, I, S
0.75"
(19)
C
Dimensions
in. (mm)
Packaging*
A
B
C
1.125
(28.6)
1.125
(28.6)
.35
(8.9)
Where
Used
Mounting
Method
Indoors
EMA
Epoxy
Max. Static
Load
z
lbs. (g)z
Std.
Pkg.
Qty.
Std.
Ctn.
Qty.
Bulk
Pkg.
Qty.
Bulk
Ctn.
Qty.
10 (4540)
10
50
200
1000
Epoxy Adhesive and Mount Kits
EMA Epoxy supplied in convenient two-compartment mixer
cup with a mixer stick for each cup. Each cup contains
adhesive for three (3) EMS or ASMS mounts.
Epoxy hardens in about five (5) minutes. Supports about 5 lbs.
after first 15 minutes. After full 24-hour curing time, bonding
strength will exceed 50 lbs. on clean, grease-free surface.
Note: Not recommended for polyethylene and polypropylene.
EMSK3-1-X0 Epoxy Kit with mounts.
Packed in sturdy foil pouch
Part Number‡
Used
With
Cable
Ties**
EMA EPOXY
Contents of Each Kit
Packaging*
Std.
Pkg.
Qty.
Bulk
Pkg.
Qty.
None
10
Kits
—
3
None
10
Kits
100
Kits
3 ea.
PLT2S-0
12 ea.
PLT2S-0
1
Kit
10
Kits
10
Kits
100
Kits
Where
Used
Epoxy
Cups
Mixer
Sticks
EMS
Mounts
Cable
Ties
Indoor/
Outdoor
10
10
None
1
EPOXY ADHESIVE ONLY
EMA-X
—
EPOXY MOUNTING KIT WITH EMS MOUNTS
EMSK3-1-X0
M, I, S
Indoor/
Outdoor
1
EPOXY MOUNTING KIT WITH EMS MOUNTS AND CABLE TIES
EMSK3-1-3-0
EMSK-12-4-12-X0 Epoxy Kit with
mounts and cable ties
88
EMSK12-4-12-X0
M, I, S
M, I, S
Indoor/
Outdoor
1
1
3
4
4
12
*Order the number of mounts required in multiplies of package quantities.
‡Part numbers listed are for standard Materials in Standard Package Quantity. For Bulk package part numbers, see page 137-138.
**Cable Tie Cross Section Sizes: M = Miniature, I = Intermediate and S = Standard.
z Max. static load rating, following full cure period, when applied with PANDUIT ® EMA Epoxy Adhesive according to installation instructions.
Most commonly used parts appear in BOLD.
Cable Tie Mounts
Tie Mounts —
Mechanically Applied
Unique cradle design provides maximum stability and rigidity to
the wire bundle. Screw or rivet installed.
A
A
A
Except
TM1S4-M69
TM2S8-C100
TM3S8-C69
TM3S8-C100
A
SECTION A-A
SECTION A-A
A
A
D
D
E
C
E
C
B
B
TM-S-
Part Number‡
Used
With
Cable
Ties**
TM-R-
Dimensions
in. (mm)
Packaging*
A
B
C
D
E
.513
(13.0)
.316
(8.0)
.230
(5.8)
.130
(3.3)
.067
(1.7)
Material
Where
Used
Color
TM1S4-C
M
TM1S6-C
TM2S6-C
Nylon 6.6
TM2S8-C
M, I, S
TM2R6-C
.630
.425
(16.0) (10.8)
.275
(7.0)
.215
(5.5)
Natural
Indoors
.060
(1.5)
TM3S8-C
TM3S10-C
TM3S25-C
M, I, S,
HS, LH
.858
.610
(21.8) (15.5)
.375
(9.5)
.320
(8.1)
.080
(2.0)
Nylon 6.6
Natural
Indoors
TM3R6-C
Hole Diameter — in. (mm)
Part
Number
Hole Dia.
Counterbore
Dia.
TM1S4
TM1S6
TM2S6
TM2S8
TM2R6
TM3S8
TM3S10
TM3S25
TM3R6
.120 (3.0)
.150 (3.8)
.150 (3.8)
.180 (4.6)
.190 (4.8)
.180 (4.6)
.200 (5.1)
.260 (6.6)
.190 (4.8)
.230 (5.8)
.280 (7.1)
.280 (7.1)
.320 (8.1)
Countersunk
.320 (8.1)
.390 (9.9)
.510 (12.9)
Countersunk
Mounting
Method
#4 (M2.5)
Screw or
Tapered Rivet
#6 (M3)
Screw or
Tapered Rivet
#8 (M4)
Screw or
Tapered Rivet
#6 (M3) Screw
or
Countersunk
Rivet
#8 (M4) Screw
or Tapered
Rivet
#10 (M5)
Screw or
Tapered Rivet
1/4 (M6)
Screw or
Tapered Rivet
#6 (M3) Screw
or
Countersunk
Rivet
Std.
Pkg.
Qty.
100
Std.
Ctn.
Qty.
500
Bulk
Pkg.
Qty.
1000
Bulk
Ctn.
Qty.
5000
100
100
500
500
1000
1000
5000
5000
100
500
1000
5000
100
500
1000
5000
100
500
1000
5000
100
500
1000
5000
100
500
1000
5000
100
500
1000
5000
Additional Tie Mount Part Numbers Available in specified materials.
All are available as standard PANDUIT ® parts
Heat
Stabilized
Nylon
TM1S4-M30
TM1S6-M30
TM2R6-M30
TM2S6-M30
TM2S8-M30
TM3S8-M30
TM3S10-M30
TM3S25-M30
Flame
Retardant
Nylon
TM1S4-M69
TM1S6-M69
TM2S6-M69
TM2S8-M69
TM3S8-C69
TM3S10-M69
Weather
Resistant
Nylon
Weather
Resistant
Polypropylene
TM1S6-M0
TM2R6-M0
TM2S6-M0
TM2S8-M0
TM3R6-M0
TM3S10-Q0
TM3S10-M0
TM3S25-M0
TM2S8-C100
TM3S8-C100
TM3S8-M100
TEFZEL***
TM3S10-C76
TM3S8-C76
TM2S8-C76
***TEFZEL is a registered trademark of E.I. DuPont de Nemours Co.
*Order the number of mounts required in multiples of package quantities.
‡Part Numbers listed are for Standard Materials in Standard Package Quantity.
For Bulk package part numb ers, see page 137-138.
**Cable Tie Cross Section Sizes: M = Miniature, I = Intermediate, S = Standard, HS = Heavy Standard and LH = Light-Heavy.
Most commonly used parts appear in BOLD.
89
Cable Tie Mounts
Extra-Heavy Tie Mounts
Mounts designed especially for use with PANDUIT ®
Extra-Heavy cross-section ties for mounting cable, large wire
bundles or tubular shapes.
Part
Number
Hole Diameter
Counterbore
Diameter
.18" (4.3 mm)
.20" (5.1 mm)
.26" (6.6 mm)
.51" (13.0)
.51" (13.0)
.51" (13.0)
TMEHS8
TMEHS10
TMEH25
A
C
Except
TMEH-S10-C100
TMEH-S10-C109
B
1.05"
(26.7)
Part Number‡
Used
With
Cable
Ties**
Dimensions
in. (mm)
A
B
Packaging*
C
TMEH-S8-Q0
TMEH-S10-Q0
M, I, S, HS,
LH, EH,
TMEH-S10-C100
HLM „
TMEH-S25-Q0
Material
Weather
Resistant
Nylon 6.6
1.65
(42)
.74
(19)
.61
(15.5)
TMEH-S10-C109
Color
Black
Where
Used
Outdoors
Weather
Resistant
Polypropylene
Polypropylene
Mounting
Method
Std.
Pkg.
Qty.
Std.
Ctn.
Qty.
Bulk
Pkg.
Qty.
Bulk
Ctn.
Qty.
500
#8 (M4) Screw
25
250
100
#10 (M5) Screw
25
250
100
500
1/4 (M6) Screw
25
250
100
500
—
—
100
500
—
—
100
500
#10 (M5) Screw
Green
Indoors
Swivel Cable Tie Mounts
The two TM style mounts are securely fastened together with a rivet that allow both mounts to swivel.
The Swivel Mount can join bundles of cable, tubing or hoses that may need to move or are not parallel.
This mount is also a great way to separate bundles to avoid abrasion.
0.73
(18.54)
0.62
(15.75)
1.23
(31.34)
.75
(19.05)
1.64
(41.70)
.87
(22.10)
TMEH
TM3
Part Number
Used
With
Cable
Ties**
TM3-X2-C0
M, I, S, HS, LH
TMEH-X2-L0
M, I, S, HS, LH,
EH,
HLM „
90
Packaging*
Dimensions
in. (mm)
Pull Apart
Force
120 lbs.
See Drawing
250 lbs.
Material
Color
Weather
Resistant
Nylon 6.6
Black
Where
Used
Outdoors/
Indoors
Std.
Pkg.
Qty.
Std.
Ctn.
Qty.
100
1000
50
500
**Cable Tie Cross Section Sizes: M = Miniature, I = Intermediate, S = Standard, HS = Heavy Standard, LH = Light-Heavy and EH = Extra-Heavy.
Most commonly used parts appear in BOLD.
*Order the number of mounts required in multiples of packaging quantities.
‡Part numbers listed are for Standard Materials in Standard Package Quantity. For Bulk package part numbers, see page 137-138.
„Used with PANDUIT ® HLM series Hook & Loop Cable Ties found on page 40.
Cable Tie Mounts
Stud Tie Mounts
Easily applied to bolts or studs with a light hammer blow or turning of the
mount. The mounts are designed for use with cable ties to mount wire
bundles, air, water and hydraulic lines.
C
C
A
A
B
B
TMSTLHS Type
Part Number‡
TMSTLHS5-M0
TMSTLHS6-M0
TMSTHS Type
Dimensions
in. (mm)
Packaging*
Used
With
Cable
Ties**
A
B
C
M, I, S,
HS, LH
1.25
(31.8)
.48
(12.2)
.95
(24.1)
Material
TMSTLHS8-M0
Impact
Modified
Weather
Resistant
Nylon 6.6
TMSTHS10-D0
TMSTHS13-D0
TMSTHS16-D0
M, I, S, HS,
LH, H
1.99
(50.6)
1.01
(25.6)
1.10
(27.9)
Color
Black
Where
Used
Outdoors
TMSTHS19-D0
Mounting
Method
#12 Stud Dia.
(5 mm)
1/4" Stud Dia.
(6 mm)
5/16" Stud Dia.
(8 mm)
3/8" Stud Dia.
(10 mm)
1/2" Stud Dia.
(13 mm)
5/8" Stud Dia.
(16 mm)
3/4" Stud. Dia.
(19 mm)
Std.
Pkg.
Qty.
100
Std.
Ctn.
Qty.
1000
Bulk
Pkg.
Qty.
1000
Bulk
Ctn.
Qty.
5000
100
1000
1000
5000
100
1000
1000
5000
100
1000
500
500
100
1000
500
500
100
1000
500
500
100
1000
500
500
Spacer Mount
Maintain a standoff from the
frame rail in Chassis Tie
applications. Ideal for
applications where bundles
must be secured away from
the frame to avoid abrasion.
0.75 R
(19.05)
C
A
E
D
B
Dimensions
in. (mm)
Part Number‡
TMSH50-T300
Used
A
With
Cable Tie
Cable
Channel
Ties
in. (mm)
SSPM2.5H-L300
.310
SSPM4H-L300
(7.875)
B
Width
in. (mm)
1.00
(25.4)
C
Standoff
Height
in. (mm)
1.00
(25.4)
D
E
Base
Recommended
Depth Panel Hole Dia.
in. (mm)
in. (mm)
1.00
.50
(25.4)
(12.7)
Packaging*
Material
Weather
Resistant Heat
Stabilized
Nylon 6.6
Minimum
Panel
Color Thickness
Black
0.188
(4.78)
Std. Std. Bulk Bulk
Pkg. Ctn. Pkg. Ctn.
Qty. Qty. Qty. Qty.
100 1000 200 1000
*Order the number of mounts required in multiples of package quantities.
Most commonly used parts appear in BOLD.
‡Part Numbers listed are for Standard Materials in Standard Package Quantity. For Bulk package part numbers, see page 137-138.
**Cable Tie Cross Section Sizes: M = Miniature, I = Intermediate, S = Standard, HS= Heavy Standard, LH = Light-Heavy and H = Heavy.
91
Cable Tie Mounts
Tie Mounts — Applied with User Supplied Adhesives
Apply cyanoacrylic or another type adhesive to mount surface. Any adhesive selected should be
user-tested to assure suitability for the actual application. Mounts should be installed on a clean,
dry and grease-free surface. Bond strength depends on adhesive used.
Low Profile Mount — AM2
Low profile design keeps bundle close to mounting surface
where overhead space is limited.
A
B
Part Number‡
Used
With
Cable
Ties**
AM2-C
M, I, S
C
Dimensions
in. (mm)
Packaging*
A
B
C
Material
Color
Where
Used
1.22
(31.2)
1.22
(31.2)
.125
(3.2)
Nylon 6.6
Natural
Indoors
TM1A, TM2A, TM3A
Mounting
Method
User
Supplied
Adhesive
Std.
Pkg.
Qty.
Std.
Ctn.
Qty.
Bulk
Pkg.
Qty.
Bulk
Ctn.
Qty.
100
500
1000
5000
Solid flat bottom surface provides maximum adhesive area.
A
A
SECTION A-A
A
B
C
Part Number‡
TM1A-C
Used
With
Cable
Ties**
M
TM2A-C
M, I, S
TM3A-C
M, I, S, HS,
LH
92
Dimensions
in. (mm)
A
.513
(13.0)
.630
(16.0)
.875
(22.2)
Most commonly used parts appear in BOLD.
B
.316
(8.0)
.425
(10.8)
.620
(15.8)
Packaging*
C
.230
(5.8)
.275
(7.0)
.375
(9.5)
Material
Color
Where
Used
Nylon 6.6
Natural
Indoors
Mounting
Method
User
Supplied
Adhesive
Std.
Pkg.
Qty.
100
Std.
Ctn.
Qty.
1000
Bulk Bulk
Pkg.
Ctn.
Qty.
Qty.
1000 10000
100
500
1000
5000
100
500
1000
5000
*Order the number of mounts required in multiples of package quantities.
‡Part Numbers listed are for Standard Materials in Standard Package Quantity. For Bulk package part number s, see page 137-138.
*Cable Tie Cross Section Sizes: M = Miniature, I = Intermediate, S = Standard, HS = Heavy Standard and LH = Light-Heavy.
Cable Tie Mounts
Screw Applied Tie
Anchor Mounts
Low profile and versatile, these screw-installed mounts can be ideal for
applications where space is limited. Designed for four-way cable tie
insertion, this mount can be mounted in-line or perpendicular to the
wire bundle.
TA1 Anchor
D (Dia) = Hole Diameter
C
B
Except
TA1S8-M69
A
Part Number‡
TA1S8-C
TA1S8-M0
Used
With
Cable
Ties**
Dimensions
in. (mm)
A
B
C
D
.17
(4.3)
TA1S8-M30
TA1S8-M69
Packaging*
M, I, S
.75
(19.0)
.38
(9.5)
.20
(5.1)
TA1S10-C
TA1S10-M0
.20
(5.1)
TA2 Anchor
Material
Nylon 6.6
Weather
Resistant
Nylon 6.6
Heat
Stabilized
Nylon
Flame
Retardant
Nylon 6.6
Nylon 6.6
Weather
Resistant
Nylon 6.6
Color
Natural
Black
Where
Used
Black
Mounting
Method
#8 (M4) Screw
Indoors
Std.
Pkg.
Qty.
100
—
Std.
Ctn.
Qty.
500
—
Bulk
Pkg.
Qty.
1000
1000
Bulk
Ctn.
Qty.
5000
5000
—
—
1000
5000
—
—
1000
5000
100
—
500
—
1000
1000
5000
5000
Natural
Natural
Black
#10 (M5) Screw
This mount is installed perpendicular to the wire bundle. Elongated slot
permits installing the screw and adjusting mount position with the
bundle attached.
.50"
(12.7)
.195"
(5.0)
.125"
(3.2)
1.225"
(31.1)
Packaging*
Part Number‡
TA2-C
Used
With
Cable Ties**
Dimensions
in. (mm)
Material
M, I, S
See Drawing
Nylon 6.6
*Order the number of mounts required in multiples of package quantities.
‡Part Numbers listed are for Standard Materials in Standard Package Quantity.
For Bulk package part numbe rs, see page 137-138.
**Cable Tie Cross Section Sizes: M = Miniature, I = Intermediate and S = Standard.
Color
Where
Used
Mounting
Method
Std.
Pkg.
Qty.
Natural
Indoors
#10 (M5) Screw
100
Std.
Ctn.
Qty.
Bulk
Pkg.
Qty.
Bulk
Ctn.
Qty.
500
1000
5000
Most commonly used parts appear in BOLD.
93
Cable Tie Mounts
Screw Applied
Low Profile Mounts
Designed to secure wire bundles where space is limited.
A
B
C
D (Dia)
Part Number‡
LPMM-S2-C
Used
With
Cable
Ties**
M
LPMM-S5-C
M
LPMS-S8-C
M, I, S
Dimensions
in. (mm)
A
.40
(10.2)
.40
(10.2)
.75
(19.1)
B
.32
(8.1)
.32
(8.1)
.50
(12.7)
C
.10
(2.5)
.10
(2.5)
.12
(3.0)
D
.0951
(2.4)
.1302
(3.3)
.1702
(4.3)
Material
Color
Nylon 6.6
Natural
Where
Used
Indoors
Indoors
Indoors
Mounting
Method
#2 (M2)
Flathead Screw
#5 (M3)
Flathead Screw
#8 (M4)
Flathead Screw
Std.
Pkg
Qty.
100
Packaging*
Std. Bulk Bulk
Ctn. Pkg. Ctn.
Qty.
Qty.
Qty.
1000 1000 10,000
100
1000
1000 10,000
100
1000
1000
5000
NOTE 1: Combination Counterbore and Countersunk Hole (.088" (2.2) Dia. rivet can also be used).
NOTE 2: Countersunk Hole
Knock-In Low
Profile Mounts
Secures wires to any pre-drilled panel. Can be installed in any panel
thickness. Eliminates screws.
Easy to Install:
.53 REF.
(13.46)
.190
(4.825)
1. Push rivet in pre-drilled panel hole.
.735
(18.670)
2. Use PANDUIT ® Rivet Installation
Tool (TNR) or hammer to drive the pin
flush to the base. This drives the rivet
into the hole and secures the mount.
A
.230
(5.840)
.490
(12.445)
.120
3. Attach wires to the mount with
cable tie.
Packaging*
Part Number‡
KIMS-H366-C2
Used With
Cable
Ties**
M, I, S
KIMS-H430-C6
M, I, S
KIMS-H500-C4
M, I, S
94
A
.155
(3.9)
.180
(4.6)
.202
(5.1)
Dimensions
in. (mm)
See Drawing
See Drawing
See Drawing
Most commonly used parts appear in BOLD.
Hole
Size
.144
(3.7)
.169
(4.3)
.196
(5.0)
Material
Nylon 6.6
Color
Red
Nylon 6.6
Blue
Nylon 6.6
Yellow
Where
Used
Indoors
Mounting
Method
Integral
Push Rivet
Integral
Push Rivet
Integral
Push Rivet
Std.
Pkg.
Qty.
100
Std.
Ctn.
Qty.
500
Bulk
Pkg.
Qty.
1000
Bulk
Ctn.
Qty.
5000
100
1000
1000
5000
100
500
1000
5000
*Order the number of mounts required in multiples of package quantities.
‡Part Numbers listed are for Standard Materials in Standard Package Quantity.
For Bulk package part numbers, see page 137-138.
**Cable Tie Cross Section Sizes: M = Miniature, I = Intermediate and S = Standard.
Cable Tie Plates
Tie Plates
Screw applied. Each tie plate has a slotted mounting hole to
accommodate various fastener spacings.
A
G
D (Dia)
F
B
C
E
Dimensions
in. (mm)
Used
With
Cable
Ties**
Part
Number‡
TP2-C
TP4H-C
M, I, S, HS
A
B
C
D
E
F
G
1.98
(50.3)
.50
(12.7)
.125
(3.2)
.200
(5.1)
.40
(10.2)
.200
(5.1)
1.60
(40.6)
3.08
(78.2)
.62
(15.7)
.203
(5.2)
.270
(6.9)
.31
(7.9)
.270
(6.9)
2.50
(63.5)
Multiple Tie Plates
Color &
Material
Where
Used
Natural
Nylon 6.6
Indoors
Packaging*
Mounting
Method z
Screw
Size
Std.
Pkg.
Qty.
Std.
Ctn.
Qty.
Bulk
Pkg.
Qty.
Bulk
Ctn.
Qty.
#10 (M5)
100
1000
1000
5000
1/4 (M6)
100
1000
500
2500
Screw applied. Used to secure closely spaced wire bundles.
E
B
F
D
A
C
Part Number‡
MTP1S-E6-C
MTP1S-E10-C
MTP1H-E6-C
MTP1H-E10-C
No.
of
Bdls.
1
2
MTP3S-E6-C
MTP3S-E10-C
MTP3H-E6-C
MTP3H-E10-C
MTP4S-E6-C
MTP4S-E10-C
MTP4H-E6-C
MTP4H-E10-C
MTP6H-E6-C
MTP6H-E10-C
C
.125
(3.2)
M, I, S,
2.09
HS, LH, H (53.1)
.62
(15.7)
.203
(5.2)
3.00
(76.2)
.50
(12.7)
.125
(3.2)
M, I, S,
3.59
HS, LH, H (91.2)
.62
(15.7)
.203
(5.2)
4.25
(108.0)
.50
(12.7)
.125
(3.2)
M, I, S,
5.09
HS, LH, H (129.3)
.62
(15.7)
.203
(5.2)
5.50
(139.7)
.50
(12.7)
.125
(3.2)
M, I, S,
6.59
HS, LH, H (167.4)
.62
(15.7)
.203
(5.2)
6.75
(171.5)
.50
(12.7)
.125
(3.2)
M, I, S,
8.09
HS, LH, H (205.5)
.62
(15.7)
M, I, S,
9.59
HS, LH, H (243.6)
.62
(15.7)
M, I, S
4
M, I, S
MTP5S-E6-C
MTP5S-E10-C
MTP5H-E6-C
MTP5H-E10-C
B
.50
(12.7)
M, I, S
3
5
6
Dimensions
in. (mm)
A
1.75
(44.5)
M, I, S
MTP2S-E6-C
MTP2S-E10-C
MTP2H-E6-C
MTP2H-E10-C
Used
With
Cable
Ties**
M, I, S
.203
(5.2)
D
E
1.25 .220 (5.58)
(31.8) .330 (7.62)
1.50 .220 (5.58)
(38.1) .300 (7.62)
1.25 .220 (5.58)
(31.8) .300 (7.62)
1.50 .220 (5.58)
(38.1) .300 (7.62)
1.25 .220 (5.58)
(31.8) .300 (7.62)
1.50 .220 (5.58)
(38.1) .300 (7.62)
1.25 .220 (5.58)
(31.8) .300 (7.62)
1.50 .220 (5.58)
(38.1) .300 (7.62)
1.25 .220 (5.58)
(31.8) .300 (7.62)
.220 (5.58)
1.50 .300 (7.62)
(38.1) .220 (5.58)
.300 (7.62)
F
.147 (3.73)
.200 (5.08)
.147 (3.73)
.200 (5.08)
.147 (3.73)
.200 (5.08)
.147(3.73)
.200 (5.08)
.147 (3.73)
.200 (5.08)
.147 (3.73)
.200 (5.08)
.147 (3.73)
.200 (5.08)
.147 (3.73)
.200 (5.08)
.147 (3.73)
.200 (5.08)
.147 (3.73)
.200 (5.08)
.147 (3.73)
.200 (5.08)
Packaging*
Mounting
Method z Std. Std. Bulk Bulk
Mil. Std.
Screw
Pkg. Ctn. Pkg. Ctn.
Size
Part No.
Qty. Qty. Qty. Qty.
MS3339-1
#6 (M3)
100 1000
—
—
—
#10 (M5)
100 1000
MS3339-6
#6 (M3)
100 1000
—
—
—
#10 (M5)
100 1000
MS3339-2
#6 (M3)
100 1000
—
—
—
#10 (M5)
100 1000
MS3339-7
#6 (M3)
100 1000
—
—
—
#10 (M5)
100 1000
MS3339-3
#6 (M3)
100 1000
—
—
—
#10 (M5)
100 1000
Natural
MS3339-8
#6 (M3)
100 1000
Nylon 6.6,
—
—
—
#10 (M5)
100 1000
Indoors
MS3339-4
#6 (M3)
100 1000
—
—
—
#10 (M5)
100 1000
MS3339-9
#6 (M3)
100 1000
—
—
—
#10 (M5)
100 1000
MS3339-5
#6 (M3)
100 1000
—
—
—
#10 (M5)
100 1000
MS3339-10 #6 (M3)
100 1000
—
—
—
#10 (M5)
100 1000
MS3339-11 #6 (M3)
100 1000
—
—
—
#10 (M5)
100 1000
Material
&
Where
Used
*Order the number of mounts required in multiples of package quantities.
Most commonly used parts appear in BOLD.
‡Part Numbers listed are for Standard Materials in Standard Package Quantity. For Bulk package part numbers, see page 137-138.
**Cable Tie Cross Section Sizes: M = Miniature, I = Intermediate, S = Standard, HS = Heavy Standard, LH = Light-Heavy and H = Heavy.
zFor use with most common screw types except flat head.
95
Cable Tie Mounts
Right Angle Mounts
Secure wire bundles that run through bulkheads or cabinet holes,
holding them away from sharp edges. Can also be used to mount
wire bundles adjacent to any surface. Screw or rivet applied.
A
B
D (Dia)
C
E
F
Part Number
Used
With
Cable
Ties**
RAMS-S3-M
M, I, S
Dimensions
in. (mm)
A
B
C
D
E
F
.56
(14.2)
.39
(9.9)
.44
(11.2)
.095
(2.4)
.06
(1.5)
.281
(7.1)
RAMH-S6-D
RAMH-S10-D
.125
(3.2)
M, I, S, HS,
LH and H
1.00
(25.4)
.75
(19.1)
Lightening Hole
Mounts
1.00
(25.4)
.200
(5.1)
.18
(4.6)
.500
(12.7)
Color,
Material
&
Where
Used
Natural
Nylon 6.6,
Indoors
Packaging*
Mounting
Method
in. (mm)
Std.
Pkg.
Qty.
Std.
Ctn.
Qty.
Bulk
Pkg.
Qty.
Bulk
Ctn.
Qty.
MS3341-2 #3 (M2.5) Screw
or 3/32 (2.4)
Round Head
Rivet
—
—
1000
5000
MS3341-1
#6 (M3) Screw
or 1/8 (3.2)
Round Head
Rivet
—
—
500
5000
—
#10 (M5) Screw
or 3/16 (4.7)
Round Head
Rivet
—
—
500
5000
Mil. Std.
Part No.
Used to secure wire bundles which run through bulkhead lightening
holes (.87" (22.1mm) diameter or larger) and keep bundles away from
sharp edges. Only one screw or rivet needed.
.70"
(17.8)
.75"
(19.1)
.30"
(7.6)
1.10"
(27.9)
.55"
(14.0)
D (Dia)
.20"
(5.1)
.45"
(11.4)
Part Number
Used
With
Cable
Ties**
LHMS-S5-D
M, I, S
96
D
Color,
Material
&
Where
Used
.127
(3.2)
LHMS-S6-D
LHMS-S10-D
Dimensions
in. (mm)
.145
(3.7)
.192
(4.9)
Most commonly used parts appear in BOLD.
Natural
Nylon 6.6,
Indoors
Packaging*
Mounting
Method
in. (mm)
Std.
Pkg.
Qty.
Std.
Ctn.
Qty.
Bulk
Pkg.
Qty.*
Bulk
Ctn.
Qty.
—
#5 (M3) Screw
or 1/8 (3.2)
Rivet
—
—
500
2500
MS3340-1
#6 (M3) Screw
or 9/64 (3.5)
Rivet
—
—
500
2500
—
#10 (M5) Screw
or 3/16 (4.7)
Rivet
—
—
500
2500
Mil. Std.
Part No.
*Order the number of mounts required in multiples of package quantities.
**Cable Tie Cross Section Sizes: M = Miniature, I = Intermediate, S = Standard, HS = Heavy Standard, LH = Light-Heavy and H = Heavy.
Cable Tie Mounts
Metal Clip-On Mounts
The mount clips on sheet metal edges for fast mounting of
harnesses with cable ties. Ties may be inserted from any of the four
sides for easy harness orientation.
A
B
Part Number
Used
With
Cable
Ties**
Dimensions
in. (mm)
A
M, I, S
Packaging*
C
Max.
Panel
Thickness
.31
(8.0)
.13
(3.2)
.46
(11.5)
.24
(6.1)
.55
(14.0)
.27
(6.9)
B
MCMS12-P-C
MCMS25-P-C
C
.88
(22.4)
MCMS30-P-C
.56
(14.2)
Metal Mount
Material
Zinc Plated
Steel
Where
Used
Mounting
Method
Indoors or
Outdoors
Std.
Pkg.
Qty.
Std.
Ctn.
Qty.
Bulk
Pkg.
Qty.
Bulk
Ctn.
Qty.
—
—
100
500
—
—
100
500
—
—
100
500
Clip-On
Screw applied aluminum mounting base for a secure support in
demanding applications.
• NOTE: Mount can
also be installed
with a user
supplied adhesive
A
.200" Dia.
(For #10
Screw)
B
C
Part Number‡
Used
With
Cable
Ties**
MBMS-S10-C
M, I, S
Dimensions
in. (mm)
Packaging*
A
B
C
Material
1.00
(25.4)
.50
(12.7)
.14
(3.6)
Aluminum
(Chromate
Coated) MIL
C. 5541 D
Class 3
Coating
*Order the number of mounts required in multiples of packaging quantities.
‡Part Numbers listed are for Standard Materials in Standard Package Quantity.
For Bulk package part numbers, see page 137-138.
**Cable Tie Cross Section Sizes: M = Miniature, I = Intermediate and S = Standard.
Where
Used
Mounting
Method
Indoors
or Outdoors
#10 (M5)
Screw
Max. Static
Load
lbs. (g)
Std.
Pkg.
Qty.
Std.
Ctn.
Qty.
Bulk
Pkg.
Qty.
10 (4540)
100
1000
1000 10000
Most commonly used parts appear in BOLD.
Bulk
Ctn.
Qty.
97
Cable Tie Mounts
Push Mounts —
Winged Push Mounts
Push mounts require no adhesive or additional mounting hardware.
They are inserted into pre-drilled holes. The winged base applies
pressure on the panel wall to provide a more secure mount in high
vibration applications. Can be used where only one side of the panel
is accessible.
PWMS-H25
.303
(7.7)
.17
(4.4)
TM2PWH25
Part Number‡
Panel Dimensions
in. (mm)
Dimensions
in. (mm)
Thickness
Hole
Max.
Diameter
PWMS-H25-C
.105
(2.7)
PWMS-H25-M0
M, I, S
.61
(15.4)
.72
(18.2)
.610
(15.5)
Used
With
Cable
Ties**
.24
(6.1)
See Drawing
TM2PWH25-C
.250
(6.4)
.094
(2.3)
Packaging*
Where
Used
Material
Color
Nylon 6.6
Natural
Indoors
Weather
Resistant
Nylon 6.6
Black
Outdoors
Nylon 6.6
Natural
Indoors
Mounting
Method
Inserted
into Pre-Drilled
Hole
Std.
Pkg.
Qty.
Std.
Ctn.
Qty.
100
1000
1000
5000
—
—
1000
5000
100
500
1000
5000
Bulk
Pkg.
Qty.
Bulk
Ctn.
Qty.
Part number shown for PWMS-H25-C and TM2PWH25-C is standard package quantity.
Push Mounts
Part Number‡
Used
With
Cable
Ties**
This part is a version of the mount shown above,
but without tensioning wings.
Panel Dimensions
in. (mm)
Dimensions
in. (mm)
Thickness
Hole
Max.
Diameter
Packaging*
Material
Color
PM2H25-C
Nylon 6.6
Natural
PM2H25-M0
Weather
Resistant
Nylon 6.6
M, I, S
See Drawing
.125
(3.2)
.250
(6.4)
PM2H25-M30
Heat
Stabilized
Nylon 6.6
Black
Std.
Pkg.
Qty.
Std.
Ctn.
Qty.
Indoors
100
500
1000
5000
Outdoors
—
—
1000
5000
—
—
1000
5000
Where
Used
Indoors
Mounting
Method
Inserted
into Pre-Drilled
Hole
Bulk
Pkg.
Qty.
Bulk
Ctn.
Qty.
Part number shown for PM2H25-C is standard package quantity.
Push Button Mounts
Designed for use where both sides of the panel
are accessible.
.080" (2.0)
.445" Dia.
(11.3)
.325"
(8.3)
Part Number‡
Used
With
Cable
Ties**
Panel Dimensions
in. (mm)
Dimensions
in. (mm)
Thickness
Hole
Max.
Diameter
PBMS-H25-C
Packaging*
Material
Nylon 6.6
PBMS-H25-C14
PBMS-H25-M0
M, I, S
See Drawing
PBMS-H25-M30
.125
(3.2)
.25
(6.4)
Weather
Resistant
Nylon 6.6
Heat
Stabilized
Nylon 6.6
Color
Natural
Gray
Where
Used
Indoors
Outdoors
Black
Mounting
Method
Indoors
Inserted into
Pre-Drilled
Hole
Std.
Pkg.
Qty.
Std.
Ctn.
Qty.
Bulk
Pkg.
Qty.
Bulk
Ctn.
Qty.
100
500
1000
5000
100
500
1000
5000
—
—
1000
5000
—
—
1000
5000
Part number shown for PBMS-H25-C and PBMS-H25-C14 is Standard Package Quantity.
98
Most commonly used parts appear in BOLD.
*Order the number of mounts required in multiples of package quantities.
‡For Bulk package part numbers, See page 137-138.
**Cable Tie Cross Section Sizes: M = Miniature, I = Intermediate and S = Standard.
Cable Tie Mounts
Masonry Push Mounts
Used to secure wire, cable or tubing to masonry surfaces.
Installed quickly into pre-drilled holes. Holds bundle securely.
B
B
C
C
A
A
MPMS19-C0
MPMS25-C0
MPMH38-L0
1. Drill hole using correct size bit.
Part Number‡
Used
With
Cable
Ties**
2. Hammer mount into hole.
Dimensions
in. (mm)
A
B
MPMS25-C0
MPMH38-L0
MPMWH32-L0
M, I, S
.25
(6.4)
1.25
M, I, S, HS, (31.8)
LH, H, and
1.41
HLM „
(35.8)
.30
(7.5)
.28
(7.1)
3. Place cable tie through mount.
4. Install wires or cable.
Hole Dimensions
in. (mm)
Drill
Depth
C
Hole
Diameter
MPMS19-C0
.97
(24.6)
MPMWH32-L0
.22
(5.6)
Wood Push Mount
Material
Where
Used
Color
Mounting
Method
.188
(5)
1.25
(31.8)
.38
(9.6)
Packaging*
.25
(6)
1.50
(38.1)
.375
(10)
1.75
(44.5)
.313
(8)
Impact
Modified
WeatherResistant
Nylon 6.6
Outdoors or Inserted into
Indoors
Pre-Drilled Hole
Black
Std.
Pkg.
Qty.
Std.
Ctn.
Qty.
Bulk
Pkg.
Qty.
Bulk
Ctn.
Qty.
100
500
1000
5000
100
500
1000
5000
50
500
500
5000
50
500
500
5000
Used to secure wire, cable, or tubing to wood surfaces. Driven
into wood with hammer, barbed design holds mount in place —
rated for 60 lb. pullout.
B
C
D
A
Part Number
WPMH-C
Used
With
Cable
Ties**
M, I, S, HS,
LH, H, and
HLM „
Dimensions
in. (mm)
Packaging*
A
B
C
D
Material
.75
(19.1)
.31
(7.9)
.50
(12.7)
.19
(4.8)
16 gauge
steel zinc
plated
Where
Used
Mounting
Method
Outdoors
or Indoors
Hammer
into Wood
Std.
Pkg.
Qty.
Std.
Ctn.
Qty.
Bulk
Pkg.
Qty.
Bulk
Ctn.
Qty.
100
500
—
—
*Order the number of mounts required in multiples of package quantities.
Most commonly used parts appear in BOLD.
‡Part Numbers listed are for Standard Materials in Standard Package Quantity. For Bulk package part numbers, see page 137-138.
„Used with PANDUIT ® HLM series Hook & Loop Cable Ties found on page 40.
**Cable Tie Cross Section Sizes: M = Miniature, I = Intermediate, S = Standard, HS = Heavy Standard, LH = Light-Heavy and H = Heavy.
99
Tie Harness Mounts used with Corrugated Loom Tubing
Tie Harness Mounts
Tie Harness Mounts are designed to be attached to the wire harness
during assembly with 2 cable ties. Ties can be installed by hand or,
more efficiently, with PANDUIT ® PAT Automatic Cable Tie Tooling
(see page 60). Use with Harness Board Standoff Post (page 129).
Available with or without corrugated loom tubing location tab.
A
B
Location tab
appears
on parts
used with
corrugated
tubing.
B
A
C
C
THMSP — Push Barb Style
THMSC — Tree Barb Style
FOR CORRUGATED TUBING — A specially designed location tab on the mount shelf aligns with grooves in corrugated tubing
ensuring proper mount location during assembly.
Part Number‡
Used
With
Cable
Ties**
Dimensions
in. (mm)
A
B
Panel Dimensions
in. (mm)
C
Thickness
Hole
Max.
Diameter
THMSP20-C
.47
(11.9)
THMSP20-C30
THMSP25-C
THMSP25-C30
M, I, S
1.54
(39.1)
.37
(9.5)
THMSC35-C639
.244-.283
(6.2-7.2)
.54
(13.7)
.46
(11.7)
THMSC35-C630
.16
(4.1)
.23
(5.8)
.25
(6.4)
.244-.268
(6.2-6.8)
Packaging*
Where
Used
Mounting
Method
Std.
Pkg.
Qty.
Std.
Ctn.
Qty.
Bulk
Pkg.
Qty.
Bulk
Ctn.
Qty.
Material
Color
Nylon 6.6
Natural
Indoors
100
1000
—
—
Heat
Stabilized
Nylon 6.6
Black
Indoors/
High Temp.
100
1000
—
—
Nylon 6.6
Natural
Indoors
Heat
Stabilized
Nylon 6.6
Black
Heat
Stabilized
Nylon 6
Natural
Push Barb
Indoors/
High Temp.
Tree Barb
Black
100
1000
1000
5000
100
1000
1000
5000
100
1000
1000
5000
100
1000
1000
5000
FOR DISCRETE WIRING — There is no location tab for applications not requiring the use of corrugated tubing.
Part Number‡
Used
With
Cable
Ties**
Dimensions
in. (mm)
A
B
Panel Dimensions
in. (mm)
C
Thickness
Hole
Max.
Diameter
THMSP20F-C
.47
(11.9)
THMSP20F-C30
THMSP25F-C
THMSP25F-C30
M, I, S
1.54
(39.1)
.37
(9.5)
THMSC35F-C639
THMSC35F-C630
100
Most commonly used parts appear in BOLD.
.16
(4.1)
.244-.283
(6.2-7.2)
.54
(13.7)
.23
(5.8)
.46
(11.7)
.25
(6.4)
.244-.268
(6.2-6.8)
Packaging*
Where
Used
Mounting
Method
Std.
Pkg.
Qty.
Std.
Ctn.
Qty.
Bulk
Pkg.
Qty.
Bulk
Ctn.
Qty.
Material
Color
Nylon 6.6
Natural
Indoors
100
1000
—
—
Heat
Stabilized
Nylon 6.6
Black
Indoors/
High Temp.
100
1000
—
—
Nylon 6.6
Natural
Indoors
Heat
Stabilized
Nylon 6.6
Black
Indoors/
High Temp.
Heat
Stabilized
Nylon 6
Natural
Black
Indoors/
High Temp.
Push Barb
100
1000
—
—
100
1000
1000
5000
100
1000
1000
5000
Tree Barb
*Order the number of pieces required in multiples of package quantities.
‡Part numbers listed are for standard materials in standard package quantity. For Bulk package part numbers, see page 137-138.
**Cable Tie Cross Section Sizes: M = Miniature, I = Intermediate, and S = Standard.
Tie Harness Mount for Single Tie
THM1SC Tie Harness Mount for Single Cable Tie —
Unique Mount is Attached to Harness Automatically as Tie is Installed
• Secured with only 1 cable tie
• Can be used with auto-fed or loose piece cable ties
• Cable ties can be installed by hand with PANDUIT ® Automatic
Cable Tie Tooling Installation Systems (see page 60) or
pneumatic tool (page 58) or hand operated cable tie
tools (page 56)
• Winged design prevents vibration
• Barb design is easy to insert into pre-drilled hole
• 50 lb. vertical extraction force from .250" hole
A
B
C
Part Number‡
Used
With
Cable
Ties**
Dimensions
in. (mm)
A
B
Panel Dimensions
in. (mm)
C
Thickness
Hole
Max.
Diameter
THM1SC-C
THM1SC-C30
M, I, S
.98
(24.8)
.38
(9.5)
.75
(19.1)
.187
(4.7)
.250
(6.5)
Packaging*
Where
Used
Material
Color
Nylon 6.6
Natural
Indoors
Heat
Stabilized
Nylon 6.6
Black
Indoors/
High Temp.
Mounting
Method
Tree
Barb
Std.
Pkg.
Qty.
Std.
Ctn.
Qty.
Bulk
Pkg.
Qty.
Bulk
Ctn.
Qty.
100
1000
1000
5000
100
1000
1000
5000
*Order the number of pieces required in multiples of package quantities.
Most commonly used parts appear in BOLD.
‡Part Numbers listed are for Standard Materials in Standard Package Quantity. For Bulk package part numbers, see page 137-138.
**Cable Tie Cross Section Sizes: M = Miniature, I = Intermediate and S = Standard.
101
Cable Tie Mounts
Control Panel Mount
Installed behind control panel switch. Ideal for high strain areas where cable
is routed from panel door to panel. Compatible with most control panel
switch designs.
B
C
D
A
E
G
F
H
Part Number
Used
With
Cable
Ties**
CPM87S-C
CPM122S-C
M, I, S
Dimensions
in. (mm)
A
B
C
D
.89
(22.6)
.57
(14.5)
1.44
(36.6)
.75
(19.1)
1.22
(31.0)
.75
(19.1)
2.07
(52.6)
1.12
(28.4)
PAN-POST ™ Standoff
Packaging*
E
.048
(1.2)
F
.17
(4.3)
G
H
.76
(19.3)
.75
(19.1)
.82
(20.8)
1.12
(28.4)
PP2S-S10-X
M, I, S
PP2S-S12-X
102
Most commonly used parts appear in BOLD.
—
—
100
1000
—
—
100
1000
Std.
Pkg.
Qty.
Std.
Ctn.
Qty.
Bulk
Pkg.
Qty.
Bulk
Ctn.
Qty.
#10 (M5)
Screw
10
50
100
1000
#12 (M5.5)
Screw
10
50
100
1000
#10 (M5)
Screw
10
50
100
1000
#12 (M5.5)
Screw
10
50
100
1000
Zinc
Plated
Steel
Control
Panel
Switch
1.10"
(27.9)
Dimensions
in. (mm)
A
.200
(5.1)
PP1S-S12-X
Bulk
Ctn.
Qty.
A (Hole Dia.)
.62"
.75"
(19.1) (15.9)
PP1S-S10-X
Bulk
Pkg.
Qty.
Mounting
Material Method
B
1.00"
(25.4)
Part Number‡
Std.
Ctn.
Qty.
Supports wire bundles above or away from surface.
.72"
Typ.
(18.3)
Used
With
Cable
Ties**
Std.
Pkg.
Qty.
.228
(5.8)
.200
(5.1)
.228
(5.8)
Packaging*
B
Color
&
Material
2.00
(50.8)
Natural
Nylon 6.6
4.60
(116.8)
Mounting
Method
*Order the number of pieces required in multiples of package quantities.
‡Part Numbers listed are for Standard Materials in Standard Package Quantity. For Bulk package part n umbers, see page 137-138.
**Cable Tie Cross Section Sizes: M = Miniature, I = Intermediate and S = Standard.
Cable Tie Mounts
Right Angle Base RAFCB
For use in perpendicular applications. Supports cable
above the mount surface.
.75"
(19.1)
C
.50"
(12.7)
A
.145" Dia
(3.7)
B
Packaging*
For Flat
Cable
Widths
(Up to)
A
in. (mm)
RAFCBI1-S6-C20
1.00
(25.4)
1.75
(44.4)
RAFCBI2-S6-C20
2.00
(50.8)
2.78
(70.6)
RAFCBI3-S6-C20
3.00
(76.2)
3.81
(96.8)
Part Number‡
B
in. (mm)
Color
&
Material
C
in. (mm)
.125
(3.2)
.125
(3.2)
Flat Cable Mounting System
Where
Used
Black
Nylon 6.6
Indoors
Mounting
Method
Std.
Pkg.
Qty.
Std.
Ctn.
Qty.
Bulk
Pkg.
Qty.
Bulk
Ctn.
Qty.
100
500
1000
5000
100
500
1000
4000
100
500
1000
4000
#6 (M3)
Screw
Secures stacked cables, folds and breakouts as well as
laminated and molded bus bars.
Base FCB
D (Dia)
Plate FCP
C
C
E
B
B
F
F
G
A
A
Mounting Application
Use one base, one corresponding size
plate and one intermediate cable tie.
Dimensions
in. (mm)
Packaging*
For Flat
Cable
Widths
(Up to)
A
B
C
D
E
F
G
FCBI1-S10-C20
1.00
(25.4)
3.29
(83.5)
1.04
(26.4)
2.08
(52.8)
.150
(3.8)
.375
(9.5)
.200
(5.1)
.095
(2.4)
FCBI2-S10-C20
2.00
(50.8)
3.50
(88.9)
2.04
(51.8)
3.10
(78.7)
.150
(3.8)
.375
(9.5)
.200
(5.1)
.095
(2.4)
FCBI3-S10-C20
3.00
(76.2)
4.52
3.04
(114.8) (77.2)
4.12
(104.6)
.150
(3.8)
.375
(9.5)
.200
(5.1)
FCBI1-A-C20
1.00
(25.4)
3.29
(83.5)
1.04
(26.4)
2.08
(52.8)
.150
(3.8)
.375
(9.5)
FCBI2-A-C20
2.00
(50.8)
3.50
(88.9)
2.04
(51.8)
3.10
(78.7)
.150
(3.8)
FCBI3-A-C20
3.00
(76.2)
4.52
3.04
(114.8) (77.2)
4.12
(104.6)
FCPI1-C20
1.00
(25.4)
1.29
(32.8)
1.04
(26.4)
FCPI2-C20
2.00
(50.8)
2.31
(58.7)
FCPI3-C20
3.00
(76.2)
3.32
(84.3)
Part Number‡
Bundling Application
Use two plates (same size) and
one intermediate cable tie.
Std.
Pkg.
Qty.
Std.
Ctn.
Qty.
Bulk
Pkg.
Qty.
Bulk
Ctn.
Qty.
#10 (M5)
Screw
100
1000
1000
5000
#10 (M5)
Screw
100
1000
1000
5000
.095
(2.4)
#10 (M5)
Screw
100
1000
1000
5000
.200
(5.1)
.095
(2.4)
Adhesive
Backed
100
1000
1000
5000
.375
(9.5)
.200
(5.1)
.095
(2.4)
Adhesive
Backed
100
1000
1000
5000
.150
(3.8)
.375
(9.5)
.200
(5.1)
.095
(2.4)
Adhesive
Backed
100
1000
1000
5000
.375
(9.5)
—
—
.200
(5.1)
—
Cable Ties
100
1000
1000
5000
2.04
(51.8)
.375
(9.5)
—
—
.200
(5.1)
—
Cable Ties
100
1000
1000
5000
3.04
(77.2)
.375
(9.5)
—
—
.200
(5.1)
—
Cable Ties
100
1000
1000
5000
Color &
Material
Black
Nylon 6.6
Black
Nylon 6.6
Black
Nylon 6.6
Where
Used
Indoors
Indoors
Indoors
Mounting
Method
*Order the number of mounts required in multiples of package quantities.
Most commonly used parts appear in BOLD.
‡Part Numbers listed are for Standard Materials in Standard Package Quantity. For Bulk package part numbers, see page 137-138.
103
Cable Tie Mounts — Connector Rings
Closed Connector Rings
Connect multiple wire bundles or hang bundles from
conduit, eliminating the need for saddle clamps.
A
C
B
Part Number
Used
With
Cable
Ties**
CR2-M
M, I, S
Dimensions
in. (mm)
Packaging*
A
B
C
Material
Color
Where
Used
.33
(8.4)
.24
(6.1)
.20
(5.1)
Nylon 6.6
Natural
Indoors
Mounting
Method
Cable Ties
CR4H-M
CR4H-M0
M, I, S,
HS, LH
.57
(14.5)
.36
(9.1)
Open Connector Ring
.30
(7.6)
Weather
Resistant Nylon
6.6
Black
Indoors/
Outdoors
Cable Ties
Std.
Pkg.
Qty.
Std.
Ctn.
Qty.
Bulk
Pkg.
Qty.
Bulk
Ctn
Qty.
—
—
1000 10000
—
—
1000 10000
—
—
1000 10000
Designed to “add on” wire bundles without changing cable ties.
.52"
(13.2)
.26"
(6.6)
.18"
(4.6)
Packaging*
Part Number
Used
With
Cable
Ties**
Dimensions
in. (mm)
Material
CROS-M
M, I, S
See Drawing
Nylon 6.6
104
Most commonly used parts appear in BOLD.
Color
Where
Used
Mounting
Method
Natural
Indoors
Connects
to M, I, S
Cable Ties
Std.
Pkg.
Qty.
Std.
Ctn.
Qty.
Bulk
Pkg.
Qty.
Bulk
Ctn.
Qty.
—
—
1000
5000
*Order the number of pieces required in multiples of packaging quantities.
**Cable Tie Cross Section Sizes: M = Miniature, I = Intermediate, S = Standard, HS = Heavy Standard and LH = Light-Heavy.
Cable Tie Mounts
Cable Spacers
Used to separate and/or hang wires, cable and hoses.
2.12
(53.8)
.62
(15.7)
.50
(12.7)
Packaging*
Part Number
Used
With
Cable
Ties**
Dimensions
in. (mm)
Material
CSH-D20
CSH-D0
Where
Used
Color
Nylon 6.6
M, I, S, HS,
LH, H
Cable Spacer — Cross
Indoors
Weather
Resistant
Nylon 6.6
See Drawing
Mounting
Method
Outdoors
or Indoors
Black
Cable Ties
Std.
Pkg.
Qty.
Std.
Ctn.
Qty.
Bulk
Pkg.
Qty.
Bulk
Ctn.
Qty.
—
—
500
2500
—
—
500
2500
Connects two bundles at 90°. Provides .19" (4.8mm) space
between bundles. Dual cradle design. Recommended max.
bundle diameter (each) is .625" (15.9mm).
.45
(11.4)
.37
(9.4)
.25
(6.3)
Packaging*
Part Number
Used
With
Cable
Ties**
DImensions
in. (mm)
Material
CSCS-M
M, I, S
See Drawing
Nylon 6.6
Marking Pens
Mounting
Method
Natural
Indoors
Cable Ties
—
Std.
Ctn.
Qty.
Bulk
Pkg.
Qty.
Bulk
Ctn.
Qty.
—
1000
10000
Provide fast drying, permanent, legible identification on nylon —
where ordinary marking pens will not work.
PX-0
PX-2
Part Number
Color
Where
Used
Std.
Pkg.
Qty.
PFX-0
PFX-2
PX-10
Std.
Pkg.
Qty.*
Std.
Ctn.
Qty.
Color of ink is color of pen. Reversible tip to extend life of pen.
12
12
144
144
Tip
Color
PX-0
PX-2
Regular
Regular
Black
Red
Description
PX-10
Regular
White
For marking black or other dark-colored parts. Color of tip denotes color.
12
300
PFX-0
PFX-2
Fine
Fine
Black
Red
For detailed marking on nylon surfaces. Color of cap and tip is color of ink.
12
12
144
144
*Order the number of pieces required in multiples of packaging quantities.
Most commonly used parts appear in BOLD.
**Cable Tie Cross Section Sizes: M = Miniature, I = Intermediate, S = Standard, HS = Heavy Standard, LH = Light-Heavy and H = Heavy.
105
Cable Tie Mounts
Marker Plates
PANDUIT ® Marker Plates can be mounted in any direction, either
vertically or horizontally as flags, tags, or wrap-around identification
plates. They can be marked with nylon marking pens or hot stamped.
See page 105 for marker pen information.
Typ.
Nom.
Dia.
.195"
(5.0)
THICKNESS: .015" (0.4mm)
A
.44"
(11.2)
B
C
Part Number‡
Dimensions
in. (mm)
Used
With
Cable
Ties
Packaging*
Bulk
Pkg.
Qty.
Bulk
Ctn.
Qty.
A
B
C
1.50
(38.1)
.75
(19.0)
1.03
(26.2)
100
500
1000
5000
MP175-C
1.75
(44.5)
.75
(19.0)
1.28
(32.5)
100
500
1000
5000
2.00
(50.8)
.75
(19.0)
1.53
(38.4)
100
500
1000
5000
2.50
(63.5)
.75
(19.0)
2.03
(51.6)
100
500
1000
5000
MP350-C
3.50
(88.9)
.75
(19.0)
3.03
(77.0)
100
500
1000
5000
MP250W175-C
2.50
(63.5)
1.75
(44.5)
2.03
(51.6)
100
500
1000
5000
MP150-C0
1.50
(38.1)
.75
(19.0)
1.03
(26.2)
100
500
1000
5000
MP175-C0
1.75
(44.5)
.75
(19.0)
1.28
(32.5)
100
500
1000
5000
2.00
(50.8)
.75
(19.0)
1.53
(38.4)
100
500
1000
5000
MP250-C0
2.50
(63.5)
.75
(19.0)
2.03
(51.6)
100
500
1000
5000
MP350-C0
3.50
(88.9)
.75
(19.0)
3.03
(77.0)
100
500
1000
5000
Std.
Pkg.
Qty.
Std.
Ctn.
Qty.
Bulk
Pkg.
Qty.
Bulk
Ctn.
Qty.
—
—
1000
5000
—
—
1000
5000
—
—
1000
5000
—
—
1000
5000
MP250-C
MP200-C0
M, I, S
M, I, S
Color
Mounting
Method
Std.
Ctn.
Qty.
MP150-C
MP200-C
Material
Where
Used
Std.
Pkg.
Qty.
Nylon 6.6
White
Weather
Resistant
Nylon 6.6
Indoors
Black
Outdoors
Marker Plates on Rolls
Cable Ties
Weather
Resistant
Cable Ties
D
.44
(11.2)
B
C
A
Part Number
MP150-R
MP175-R
MP200-R
MP250-R
Dimensions
in. (mm)
Used
With
Cable
Ties
M, I, S
Packaging*
A
B
C
D
1.50
(38.1)
.75
(19.0)
1.03
(26.2)
1.69
(42.9)
1.75
(44.5)
.75
(19.0)
1.28
(32.5)
1.94
(49.3)
2.00
(50.8)
.75
(19.0)
1.53
(38.9)
2.19
(55.6)
2.50
(63.5)
.75
(19.0)
2.03
(51.6)
2.69
(68.3)
Material
Nylon 6.6
Color
White
Where
Used
Indoors
Mounting
Method
Cable Ties
Marker Plate Kits
Part Number
MP150KIT-Q
MP250KIT-Q
MP350KIT-Q
106
Description
Kit contains 25 MP150 marker plates, 1 PFX-0 marking pen.
Kit contains 25 MP250 marker plates, 1 PFX-0 marking pen.
Kit contains 25 MP350 marker plates, 1 PFX-0 marking pen.
Most commonly used parts appear in BOLD.
Std.
Pkg.
Qty.*
1
1
1
*Order the number required in multiples of packaging quantities.
‡Part Numbers listed are for Standard Materials in Standard Package Quantity.
For Bulk package part numb ers, see page 137-138.
**Cable Tie Cross Section Sizes: M = Miniature, I = Intermediate, and S = Standard.
Outside Plant Products
Stackable Cable Spacer
A
.79
(20.1)
Just one part to inventory. Each spacer snaps by hand into
another— increases spacer height by 1/2" increments.
Because there is only one part, on-site sorting is
eliminated. Can be used with up to 3/4" width lashed cable
supports in parallel or perpendicular applications.
Used perpendicular to strand
and cable
Part Number
SACS50-T100
Used
With
Cable
Ties
See
Footnote
.40
(10.2)
.77
(19.6)
B
.71
(18.0)
C
.45
(11.4)
Used parallel to strand and cable
Underground application
Dimensions
in. (mm)
A
B
Packaging*
Material
Color
Where
Used
Mounting
Method
Std.
Pkg.
Qty.
Weather
Resistant
Polypropylene
Black
Outdoors
Cable Ties
—
C
2.08 1.16 .50
(52.8) (29.5) (12.7)
.51
(13.0)
Std.
Ctn.
Qty.
Bulk
Pkg.
Qty.
Bulk
Ctn.
Qty.
—
200
2000
Stackable Spacers may be installed using Weather-Resistant Lashing Ties (see page 15). Weather- Resistant Extra-Heavy and Light-Heavy Cable Ties (see page 15), and Stainless Steel
Ties (see page 77).
Weather Resistant
Polypropylene Aerial
Support Tie —
With integral 1/2"
(12.7mm) spacer
Designed to attach coax or telephone cable to the support strand 1/4" (6.4mm) or
5/16" (7.9mm) to form the expansion loop and keep equipment and cables clear of
pole hardware. One-piece construction with integral spacer reduces inventory
costs of separate spacer and bands and installs faster to lower the installed cost.
Releasable and reusable.
B
D
A REF.
C
Support Strand
Max. Dia.:
.32 (8.1 mm)
Min. Dia:
.22 (5.6 mm)
Part Number
AST10-5-C100
AST15-5-C100
AST20-5-C100
AST25-5-C100
Head
Length Width Thickness
Width
A
B
C
D
in. (mm) in. (mm) in. (mm) in. (mm)
5.6
(142)
6.9
(175)
.448
.055
1.16
(11.4)
(1.4)
(29.5)
8.4
(214)
10.0
(254)
Max.
Bundle
Dia.
in. (mm)
1.0
(25)
1.5
(38)
2.0
(51)
2.5
(64)
Min. Loop
Tensile
Strength
lbs. (N)
75
(334)
Recommended
PANDUIT ®
Installation Tool
Part Number
Hand Installed Only
Spacer Height
.50 (12.7 mm)
Nom.
Packaging*
Std. Std.
Pkg. Ctn.
Qty. Qty.
100 1000
100
1000
100
1000
100
1000
CABLE
(or Cable
Bundle)
Assembled View
*Order the number of pieces required in multiples of package quantities.
Most commonly used parts appear in BOLD.
107
Cable and Wire Mounting Devices (used without cable ties)
Wiring Accessories are an integral part of the
PANDUIT ® comprehensive selection of wire
management products.
These accessories are one piece solutions that help
provide the lowest installed cost for controlling,
mounting and protecting wire and cable.
Mounting methods include:
• Adhesive-Backed
• Screw applied
• Rivet applied
• Push Mounts
Adhesive Backed Mounting Devices
Faster Liner Removal Speeds Installation and
Lowers Installed Cost
• The adhesive backed mounts are offered either as
one or two mounts per liner
• The two-up mounts are easily removed by bending
the mounts away from the liner
• The individual mounts have a convenient tear tab
for quick removal
CLINCHER ™ Adjustable Releasable Clamp
This clamp provides a fast and convenient method of securing bundles from
.19" (4.8mm) up to .69" (17.5mm) diameter. It is available with adhesive
backing or screw applied with one #6 (M3) screw.
The CLINCHER ™ clamp is fast and easy to use. . .
1.00
(25.4)
.50
(12.7)
.38 Rad
(9.5)
Part Number‡
Bundle
Dia.
in. (mm)
Material
Color
ARC.68-A-Q
White
ARC.68-A-Q14
Gray
ARC.68-S6-Q
.19-.69
(4.8-17.5)
Polypropylene
ARC.68-S6-Q14
108
Most commonly used parts appear in BOLD.
Lift tab to release
1.00
(25.4)
White
Gray
.15 Dia
(3.9)
Where
Used
Indoors
Packaging*
Mounting
Method
Max.
Static
Load
lbs. (g)
Rubber
Adhesive
.50
(227)
25
250
100
25
250
100
1000
#6 (M3)
Pan Head
Screw
—
25
250
100
1000
—
25
250
100
1000
Std.
Pkg.
Qty.
Std.
Ctn.
Qty.
Bulk
Pkg.
Qty.
Bulk
Ctn.
Qty.
1000
*Order the number of mounts required in multiples of packaging quantities.
‡Part Numbers listed are for Standard Materials in Standard Package Quantity. For Bulk package part numbers, see page 137-138.
Cable and Wire Mounting Devices
Adhesive Backed Cord Clips — ACC Type
Three sizes of clips to hold cords, tubing, cable, or wire
bundles up to .62" (15.7mm) diameter. Bundles are easily
snapped into or out of the clips.
C
B
Part Number‡
ACC19-A-C
ACC19-AT-C
ACC19-A-C20
ACC19-AT-C0
Max.
Bundle
Dia.
in. (mm)
.19
(4.8)
Dimensions
in. (mm)
A
B
.62
.76
(15.9) (19.3)
C
D
.25
(6.5)
.39
(9.9)
ACC38-A-C
ACC38-AT-C
ACC38-A-C20
ACC38-AT-C0
.38
(9.6)
1.00
1.00
(25.4) (25.4)
.27
(6.9)
.49
(12.4)
ACC62-A-C
ACC62-AT-C
ACC62-A-C20
ACC62-AT-C0
.62
(15.7)
A
D
1.24
1.12
(31.4) (28.6)
.63
(16.1)
.74
(18.8)
Material
Nylon 6.6
Nylon 6.6
Color
Natural
Natural
Nylon 6.6
Weather
Resistant
Nylon 6.6
Nylon 6.6
Nylon 6.6
Black
Black
Nylon 6.6
Weather
Resistant
Nylon 6.6
Nylon 6.6
Nylon 6.6
Nylon 6.6
Weather
Resistant
Nylon 6.6
Natural
Natural
Black
Black
Natural
Natural
Black
Black
Where
Used
Indoors
Indoors/
High Temp.
Indoors
Outdoors/
High Temp.
Adhesive
Type
Rubber
Acrylic
Indoors
Indoors/
High Temp.
Indoors
Outdoors/
High Temp.
Rubber
Acrylic
Rubber
Acrylic
Rubber
Acrylic
Indoors
Indoors/
High Temp.
Indoors
Outdoors/
High Temp.
Max.
Static
Load
lbs. (g)
.20
(91)
.50
(227)
Rubber
Acrylic
Rubber
Acrylic
.70
(318)
Packaging*
Std.
Pkg.
Qty.
100
100
Std.
Ctn.
Qty.
500
500
Bulk
Pkg.
Qty.
1000
1000
Bulk
Ctn.
Qty.
5000
5000
100
100
500
500
1000
1000
5000
5000
100
100
500
500
1000
1000
5000
5000
100
100
500
500
1000
1000
5000
5000
100
100
500
500
500
500
5000
5000
100
100
500
500
500
500
5000
5000
Push Mount Cord Clip
Mounts snap easily into pre-drilled
holes. Integral mounting device
eliminates the need for additional
mounting hardware. The winged design
holds mount in place in applications
where vibration is present.
Part Number
PMCC38H25-C
PMCC38H25-M0
Max.
Bundle
Dia.
in. (mm)
.38
(9.6)
.50"
(12.7)
.38"
(9.6)
.90"
(22.9)
Panel Dimensions
in. (mm)
Dimensions
See drawing
Material
Nylon
Weather
Resistant
Nylon 6.6
*Order the number of mounts requried in multiples of packaging quantities.
‡Part Numbers listed are for Standard Materials in Standard Package Quantity.
For Bulk package part numbers, see page 137-138.
Color
Natural
Black
Where
Max.
Hole
Used
Thickness Diameter
Indoors
.105
.250
Outdoors
(2.7)
(6.4)
Packaging*
Mounting
Method
Inserted into a
Pre-Drilled Hole
Std.
Pkg.
Qty.
100
—
Std.
Ctn.
Qty.
1000
—
Most commonly used parts appear in BOLD.
Bulk
Pkg.
Qty.
1000
1000
Bulk
Ctn.
Qty.
5000
5000
109
Cable and Wire Mounting Devices
AJC Type
These low profile “J” clips retain cords, wires, or tubing and are available in four
sizes. Their flexible design allows for easy cord insertion yet holds bundles tightly.
C
D Dia.
E
B
A
Part Number
AJC19-A-C
AJC25-A-C
AJC31-A-C
AJC38-A-C
Max.
Bundle
Dia.
in. (mm)
.19
(4.8)
.25
(6.4)
.31
(7.9)
.38
(9.6)
A1C25-A-C8
A1C38-A-C8
A1C50-A-C8
Max.
Bundle
Dia.
in. (mm)
.12
(3.0)
.25
(6.4)
.38
(9.5)
.50
(12.7)
A2C25-A-C8
A2C38-A-C8
A2C50-A-C8
110
B
1.25
(31.8)
1.50
(38.1)
1.75
(44.5)
2.00
(50.8)
C
.30
(7.6)
.34
(8.6)
.44
(11.2)
.53
(13.5)
D
.19
(4.8)
.25
(5.8)
.31
(7.9)
.38
(10.2)
E
.77
(19.6)
.77
(19.6)
1.03
(26.2)
1.03
(26.2)
Gray,
PVC
Where
Used
Mounting
Method
Indoors
Rubber
Adhesive
Max.
Static
Load
lbs. (g)
.50
(227)
.60
(272)
.90
(408)
1.0
(454)
Packaging*
Std.
Pkg.
Qty.
—
Std.
Ctn.
Qty.
—
Bulk
Pkg.
Qty.
100
Bulk
Ctn.
Qty.
1000
—
—
100
1000
—
—
100
1000
—
—
100
1000
Dimensions
in. (mm)
A
.77
(19.6)
.91
(23.1)
1.04
(26.4)
1.17
(29.7)
B
.63
(16)
.63
(16)
.63
(16)
.63
(16)
C
.23
(5.8)
.38
(9.7)
.51
(13)
.64
(16.3)
Material
Color
Where
Used
PVC
Gray
Indoors
Mounting
Method
Max.
Static
Load
lbs. (g)
Packaging*
Std.
Bulk
Ctn.
Pkg.
Qty.
Qty.
—
100
Bulk
Ctn.
Qty.
1000
Rubber
Adhesive
.14
(64)
Std.
Pkg.
Qty.
—
—
—
100
1000
—
—
100
1000
—
—
100
1000
Holds cords, cables and tubing. Two adhesive pads for added strength.
A2C Type
Part Number
A2C12-A-C8
A
.89
(22.6)
.92
(23.4)
1.23
(31.2)
1.28
(32.5)
Color
&
Material
Holds cords, cables and tubing. Single adhesive pad for confined areas.
A1C Type
Part Number
A1C12-A-C8
Dimensions
in. (mm)
Max.
Bundle
Dia.
in. (mm)
.12
(3.0)
.25
(6.4)
.38
(9.5)
.50
(12.7)
Dimensions
in. (mm)
A
1.30
(33)
1.43
(36.3)
1.56
(39.6)
1.72
(43.7)
B
.63
(16)
.63
(16)
.63
(16)
.63
(16)
C
.23
(5.8)
.36
(9.1)
.49
(12.4)
.61
(15.5)
Material
Color
Where
Used
PVC
Gray
Indoors
Mounting
Method
Max.
Static
Load
lbs. (g)
Rubber
Adhesive
.37
(169)
Packaging*
Std.
Pkg.
Qty.
—
Std.
Ctn.
Qty.
—
Bulk
Pkg.
Qty.
100
Bulk
Ctn.
Qty.
1000
—
—
100
1000
—
—
100
1000
—
—
100
1000
*Order the number of mounts required in multiples of package quantities.
Most commonly used parts appear in BOLD.
Cable and Wire Mounting Devices
MACC Type
Part Number
MACC25-A-C
MACC62-A-C
Metal adhesive backed cord clip can be opened and closed without
damage to the clip, to remove or add wires quickly and easily.
Max.
Bundle
Dia.
in. (mm)
.25
(6.4)
.62
(15.7)
Dimensions
in. (mm)
A
.53
(13.5)
.75
(19.1)
B
.79
(20)
1.18
(30)
LWC Type
C
.28
(7.1)
.28
(7.1)
Material
Color
Where
Used
Zinc
Plated
Steel
—
Indoors
Mounting
Method
Rubber
Adhesive
Max.
Static
Load
lbs. (g)
.21
(95)
.44
(200)
Packaging*
Bulk
Pkg.
Qty.
—
Std.
Pkg.
Qty.
100
Std.
Ctn.
Qty.
1000
100
1000
Bulk
Ctn.
Qty.
—
—
—
Holds wires, cable and tubing and is available in 6 sizes, with releasable
latch. Adhesive backed and push mount styles available. Large mounting
base for high bonding strength.
B
C
A
Part Number‡
LWC19-A-C
LWC19-A-C14
LWC19-A-C20
LWC25-A-C
LWC25-A-C14
LWC25-A-C20
LWC38-A-C
LWC38-A-C14
LWC38-A-C20
LWC50-A-L
LWC50-A-L14
LWC50-A-L20
LWC75-A-L
LWC75-A-L14
LWC75-A-L20
LWC100-A-L
LWC100-A-L14
LWC100-A-L20
LWC19-H25-C
LWC19-H25-C14
LWC19-H25-C20
LWC25-H25-C
LWC25-H25-C14
LWC25-H25-C20
LWC38-H25-C
LWC38-H25-C14
LWC38-H25-C20
LWC50-H25-L
LWC50-H25-L14
LWC50-H25-L20
LWC75-H25-L
LWC75-H25-L14
LWC75-H25-L20
LWC100-H25-L
LWC100-H25-L14
LWC100-H25-L20
Max.
Bundle
Dia.
in. (mm)
C
B
Push Mount
Version
Panel Thickness
in. (mm)
Dimensions
in. (mm)
A
Adhesive
Version
C
.19
(4.8)
.61
.85
(15.5) (21.6)
.39
(9.9)
.25
(6.4)
1.0
.88
(25.4) (22.2)
.45
(11.4)
.37
(9.5)
1.0
1.0
(25.4) (25.4)
.56
(14.2)
.50
(12.7)
1.0
1.26
(25.4) (32.0)
.67
(17.0)
.75
(19.1)
1.24
1.48
(31.5) (37.6)
.90
(22.9)
1.0
(25.4)
1.97
2.21
(50.0) (56.1)
1.26
(32.0)
.19
(4.8)
.51
.85
(12.8) (21.6)
.41
(10.4)
.25
(6.4)
.58
.86
(14.7) (21.8)
.47
(11.9)
.37
(9.5)
.58
.94
(14.7) (23.9)
.57
(14.5)
.50
(12.7)
.76
1.25
(19.3) (31.8)
.78
(19.8)
.75
(19.1)
.87
1.45
(22.1) (36.8)
.97
(24.7)
1.0
(25.4)
.99
1.89
(25.1) (47.9)
1.30
(33.0)
Material
Nylon
6.6
Nylon
6.6
Color
Natural
Gray
Black
Natural
Gray
Black
Natural
Gray
Black
Natural
Gray
Black
Natural
Gray
Black
Natural
Gray
Black
Natural
Gray
Black
Natural
Gray
Black
Natural
Gray
Black
Natural
Gray
Black
Natural
Gray
Black
Natural
Gray
Black
Max.
Static
Mounting Load
Where
Max.
Hole
Used Thickness Diameter Method lbs. (g)
.25
(113)
.45
(204)
Indoors
—
—
Rubber
Adhesive
.50
(227)
.63
(284)
.94
(425)
2.25
(1020)
—
—
Indoors
.102
(2.6)
*Order the number of mounts required in multiples of package quantities.
‡Part numbers listed are for standard materials in standard package quantity. For Bulk package part numbers, see page 137-138.
.220
(5.6)
Inserted
into
Pre-Drilled
Hole
—
—
—
—
Std.
Pkg.
Qty.
100
100
100
100
100
100
100
100
100
50
50
50
50
50
50
50
50
50
100
100
100
100
100
100
100
100
100
50
50
50
50
50
50
50
50
50
Packaging*
Std. Bulk
Ctn. Pkg.
Qty. Qty.
1000
—
1000 500
1000
—
1000 500
1000 500
1000
—
1000 500
1000 500
1000
—
500
200
500
200
500
—
500
100
500
100
500
—
500
100
100
500
500
—
1000 500
1000 500
1000 500
1000 500
1000 500
1000
—
1000 500
1000 500
—
1000
200
500
500
200
500
—
500
100
500
100
500
—
500
100
500
100
500
—
Most commonly used parts appear in BOLD.
Bulk
Ctn.
Qty.
—
5000
—
5000
5000
—
5000
5000
—
2000
2000
—
1000
1000
—
1000
1000
—
5000
5000
5000
5000
5000
—
5000
5000
—
2000
2000
—
1000
1000
—
1000
1000
—
111
Cable and Wire Mounting Devices
BEC Type
Bevel Entry Clips are available in 3 sizes to hold tubing, cable or wire bundles.
The beveled entry makes it easy to snap in the bundle. The clips are available
in push barb or adhesive backed styles.
Adhesive
Version
B
C
Push Mount
Version
C
A
Part Number‡
BEC38-A-L
Dimensions
in. (mm)
Max.
Bundle
Dia.
in. (mm)
A
.38
(9.6)
1.46
(37.1)
BEC38-A-L20
B
Panel Dimensions
in. (mm)
Material
Color
Where
Used
Nylon 6.6
Natural
Indoors
—
—
Nylon 6.6
Black
Indoors
—
—
Weather
Resist. Nylon 6.6
Black
Outdoors
—
—
Nylon 6.6
Natural
Indoors
—
—
C
1.24
.52
(31.5) (13.2)
BEC38-AT-L0
BEC62-A-L
BEC62-A-L20
.62
(15.7)
1.46
(37.1)
1.24
.79
(31.5) (20.1)
BEC62-AT-L0
Black
Indoors
—
—
Weather
Resist. Nylon 6.6
Black
Outdoors
—
—
Nylon 6.6
Natural
Indoors
—
—
.75
(19)
1.46
(37.1)
Nylon 6.6
Black
Indoors
—
—
1.49
.89
(37.8) (22.6)
BEC75-AT-L0
BECP38H25-L
BECP38H25L20
BECP75H25-L
BECP75H25L20
Weather
Resist. Nylon 6.6
.38
(9.6)
1.46
(37.1)
.73
1.0
(18.5) (25.4)
.75
(9.6)
1.47
(37.3)
.73
1.35
(18.5) (34.3)
Outdoors
—
—
.91
(411)
.91
(411)
Black
Natural
Indoors
.08
(1.9)
.250
(6.4)
Inserted into
Pre-Drilled Hole
Black
50
500
200
1000
50
500
200
1000
50
500
200
1000
50
500
200
1000
50
500
200
1000
50
500
200
1000
50
500
200
1000
50
500
200
1000
—
—
50
50
500
500
200
200
1000
1000
—
—
50
50
500
500
200
200
1000
1000
1.09
(493)
Natural
Nylon 6.6
ADCC Type
Black
Packaging*
Max.
Static Std. Std. Bulk Bulk
Load Pkg. Ctn. Pkg. Ctn.
lbs. (g) Qty. Qty. Qty. Qty.
50
500 200 1000
Mounting
Method
in. (mm)
Rubber
Adhesive
Rubber
Adhesive
Acrylic
Adhesive
Rubber
Adhesive
Rubber
Adhesive
Acrylic
Adhesive
Rubber
Adhesive
Rubber
Adhesive
Acrylic
Adhesive
Max.
Hole
Thickness Diameter
Nylon 6.6
BEC75-A-L
BEC75-A-L20
A
Holds two cables in high temperature applications both indoors and outdoors.
.681
(17.3)
.44
(11.2)
1.00
(25.4)
Part Number‡
ADCC31-AT-C10
Max.
Bundle
Dia.
in. (mm)
2 bundles
.20-.31
(5.1-7.9)
Material
NORYL*
Color
White
Where
Used
Indoors/
Outdoors
Mounting
Method
Acrylic
Adhesive
Max.
Static
Load
lbs. (g)
.25
(113)
Packaging*
Std.
Pkg.
Qty.
100
Std.
Ctn.
Qty.
500
*NORYL is a registered trademark of General Electric Company.
AMC Type
Holds a single cable and can be mounted on any flat smooth surface both
indoors and outdoors.
.36
(9.14)
.81
(20.6)
Part Number
AMC25-AT-C10
112
Max.
Bundle
Dia.
in. (mm)
.22-.28
(6 -7)
Material
Color
PVC
White
Most commonly used parts appear in BOLD.
1.00
(25.4)
Where
Used
Mounting
Method
Max.
Static
Load
lbs. (g)
Indoors/
Outdoors
Acrylic
Adhesive
.40
(182)
Packaging*
Std.
Pkg.
Qty.
Std.
Ctn.
Qty.
Bulk
Pkg.
Qty.
Bulk
Ctn.
Qty.
—
—
1000
1000
*Order the number of mounts required in multiples of package quantities.
‡Part numbers listed are for standard materials in standard package quantity. For Bulk package part numbers, see page 137-138.
Cable and Wire Mounting Devices
VCC Type
Funnel entry design of this vertical cord clip allows for easy insertion of
wires, cables and cords. Top loading for fast production operations.
A
Part Number‡
VCC25-A-C
VCC25-A-C20
VCC50-A-C
B
Dimensions
in. (mm)
Max.
Bundle
Dia.
in. (mm)
A
B
.25
(6.4)
.50
(12.7)
1.00
(25.4)
.50
(12.7)
1.00
(25.4)
1.56
(39.7)
Material
Nylon 6.6
Color
Natural
Black
Natural
Where
Used
Mounting
Method
Indoors
Rubber
Adhesive
Packaging*
Max.
Static Std.
Load Pkg.
lbs. (g) Qty.
100
.25
(113)
100
.78
100
(354)
Std.
Ctn.
Qty.
500
500
500
Bulk
Pkg.
Qty.
1000
1000
200
Bulk
Ctn.
Qty.
5000
5000
1000
This versatile clip retains and supports wire for a variety of applications.
Provides a quickly installed mount with a locked cover which withstands
vibration yet allows easy access.
Latching Clip
C
A
Dimensions
in. (mm)
Max.
Bundle
Dia.
in. (mm)
A
B
C
LC3-A-C8
.20
(5.0)
.75
(19)
.78
(19.8)
.47
(11.9)
LC5-A-C8
.36
(9.1)
1.00
(25.4)
1.01
(25.7)
.61
(15.5)
LC10-A-L8
.93
(23.6)
1.00
(25.4)
1.51
(38.4)
.84
(21.3)
Part Number
B
Cable Holder
Material
PVC
Color
Gray
Where
Used
Mounting
Method
Rubber
Adhesive
Indoors
Holds wires, cables and tubing and has a
releasable latch. Adhesive backed and
screw mount styles available. Large
mounting base for high bonding strength.
Max.
Static Std.
Load Pkg.
lbs. (g) Qty.
Packaging*
Std.
Ctn.
Qty.
Bulk
Pkg.
Qty.
Bulk
Ctn.
Qty.
.22
(100)
—
—
100
1000
.44
(200)
—
—
100
1000
.60
(272)
—
—
50
500
A
B
D
E
C
Dimensions
in. (mm)
Part Number
Packaging*
Cable
Width
in. (mm)
A
B
C
D
E
Material
Color
Where
Used
2.00
(50.8)
5.04
(128.0)
2.48
(63.0)
2.06
(52.3)
.59
(15.0)
1.50
(38.1)
Nylon 6.6
Gray
Indoors
CH105-A-C14
CH105-S6-C14
*Order the number of mounts required in multiples of package quantities.
‡Part numbers listed are standard materials in standard package quantity. For Bulk package part numbers, see page 137-138.
Mounting
Method
Max. Static
Load
lbs. (g)
Rubber
Adhesive
1.28
(582)
(2) #6 (M3)
Screws
—
Std.
Pkg.
Qty.
Std.
Ctn.
Qty.
100
200
Most commonly used parts appear in BOLD.
113
Cable and Wire Mounting Devices
Adhesive Backed
Flat Cable Mounts
LPFCM Type —
Low Profile
This low profile mount is available in 3 sizes and provides cost effective
cable containment and identification for stack heights up to .105"
(2.67mm). It features a matte, textured surface for either hand written
identification or application of computer labels.
B
A
.060
(1.5)
.500
(12.7)
C
0.138 Dia.
(3.5)
.045
(1.1)
Identification
Area
Dimensions
in. (mm)
Part Number‡
LPFCM14-A-C14
LPFCM22-A-C14
LPFCM34-A-C14
Cable
Width
in. (mm)
A
B
1.44
2.56
2.00
(37)
(65)
(50.8)
2.19
3.31
2.75
(56)
(84)
(69.9)
3.44
4.56
4.00
(87)
(115.8) (101.6)
C
.134
(3.4)
Packaging*
D
2.00
(50.8)
2.75
(69.9)
4.00
(101.6)
Material
Color
Where
Used
Nylon 6.6
Gray
Indoors
Mounting
Method
Rubber Adhesive/
Static Load
.25 lbs (113g)
or (2) #6 (M3) Screws
Std.
Pkg.
Qty.
100
Std.
Ctn.
Qty.
500
Bulk
Pkg.
Qty.
500
Bulk
Ctn.
Qty.
5000
100
500
500
5000
100
500
500
5000
Adhesive Backed Flat Cable Mounts — FCM Type
The FCM will hold flat cable securely without damaging the cable’s
jacket or conductors. The four available sizes will accommodate cable
up to 3.25" wide and allow cable stacking up to .17" (4.3mm). All sizes
are available with or without adhesive backing.
0.50
(12.7)
A
A
0.50
(12.7)
1.00
(25.4)
0.14 DIA THRU
(3.6)
1.00
(25.4)
0.14 (3.6) DIA. THRU
D
C
FCM1 & FCM1.2
B
1.5
(38.1)
D
C
TEAR-TAB
FCM2 & FCM3.25
TEAR-TAB
B
Dimensions
in. (mm)
Part Number‡
Cable
Width
in. (mm)
A
B
C
D
Material
Color
Where
Used
Mounting
Method
Indoors
Rubber Adhesive/Static Load
.5 lbs. (227g)
Rubber Adhesive/Static Load
.62 lbs. (281g)
Rubber Adhesive/Static Load
1.0 lbs. (454g)
Rubber Adhesive/Static Load
1.5 lbs. (681g)
Std.
Pkg.
Qty.
Packaging*
Std. Bulk
Ctn.
Pkg.
Qty.
Qty.
Bulk
Ctn.
Qty
100
500
200
1000
100
500
200
1000
100
500
200
1000
50
500
200
1000
100
500
200
1000
100
500
200
1000
100
500
200
1000
50
500
200
1000
ADHESIVE BACKED
FCM1-A-C14
1.00
(25.4)
2.90
(73.7)
1.21
(30.7)
1.05
(26.7)
.61
(15.5)
FCM1.2-A-C14
1.20
(30.5)
3.16
(80.3)
1.37
(34.8)
1.20
(30.5)
.69
(17.5)
FCM2-A-C14
2.00
(50.8)
5.06
(128.5)
2.22
(56.4)
2.05
(52.1)
.37
(9.4)
FCM3.25-A-L14
3.25
(82.5)
7.30
(185.4)
3.38
(85.9)
3.23
(82.0)
.94
(23.9)
1.00
(25.4)
1.20
(30.5)
2.00
(50.8)
3.25
(82.5)
2.90
(73.7)
3.16
(80.3)
5.06
(128.5)
7.30
(185.4)
1.21
(30.7)
1.37
(34.8)
2.22
(56.4)
3.38
(85.9)
1.05
(26.7)
1.20
(30.5)
2.05
(52.1)
3.23
(82.0)
.61
(15.5)
.69
(17.5)
.37
(9.4)
.94
(23.9)
Nylon 6.6
Gray
SCREW MOUNTED
FCM1-S6-C14
FCM1.2-S6-C14
FCM2-S6-C14
FCM3.25-S6-L14
114
Most commonly used parts appear in BOLD.
#6 (M3)
Screw
Nylon 6.6
Gray
Indoors
(2) #6
(M3) Screws
*Order the number of pieces required in multiples of package quantities.
‡Part numbers listed are for standard materials in standard package quantities. For Bulk package part numbers, see page 137-138.
Cable and Wire Mounting Devices
Adhesive Backed Flat Cable
Mounts — FCH Type
The FCH part is designed for flat cable up to a stack height of
.25" (6.3mm) or discrete wire. It is available with adhesive
backing or can be screw applied.
A
0.50
(12.7)
0.14 DIA THRU
(3.6)
.63
(16.00)
1.03
(26.16)
D
E
C
B
TEAR-TAB
Dimensions
in. (mm)
Part Number‡
FCH2-A-C14
Cable
Width
in. (mm)
A
B
C
D
E
Material
Color
Where
Used
2.00
(50.8)
5.00
(128.1)
2.50
(63.0)
2.10
(52.2)
.59
(15.0)
1.50
(38.1)
Nylon 6.6
Gray
Indoors
FCH2-S6-C14
Adhesive Backed Flat Cable
Mounts — FCC Type
Mounting
Method
Rubber
Adhesive/
Static Load
1.0 lbs.
(454g)
(2) #6 (M3)
Screws
Std.
Pkg.
Qty.
100
Packaging*
Std.
Bulk
Ctn. Pkg.
Qty.
Qty.
500
200
100
500
—
Bulk
Ctn.
Qty.
1000
—
Used with any width flat cable for a maximum stack
height of .17" (4.3mm).
B
A
C
TEAR-TAB
Dimensions
in. (mm)
Part Number‡
FCC5-A-C8
FCC-A-C8
Cable
Width
in. (mm)
Any
width
flat
cable
A
1.00
(25.4)
B
.56
(14.1)
C
.29
(7.4)
1.00
(25.4)
1.09
(27.7)
.38
(9.7)
Material
Color
Where
Used
PVC
Gray
Indoors
Mounting
Method
Rubber
Adhesive/Static
Load .25 lbs.
(113g)
Rubber
Adhesive/Static
Load .50 lbs.
(227g)
Std.
Pkg.
Qty.
100
Packaging*
Std. Bulk
Ctn. Pkg.
Qty.
Qty.
1000
500
Bulk
Ctn.
Qty.
5000
100
1000
5000
500
*Order the number of pieces required in multiples of package quantities.
‡Part numbers listed are for standard materials in standard package quantities. For Bulk package part numbers, see page 137-138. Most commonly used parts appear in BOLD.
115
Cable and Wire Mounting Devices
PAN-CLAMP ™
Heavy Duty Fixed
Diameter Clamp with
Integrated Fastener
PANDUIT ® PAN -CLAMP ™ Heavy Duty Fixed Diameter Clamps offer easy
installation and economical assembly for a wide variety of applications.
• Integrated fastener replaces up to a five piece assembly
• Anchors with 70 lbs. (31.8kg) of pull out force and supports
125 lbs. (56.7kg) of shear
1. Install into 1/8" (3.2mm) thick
panel or bracket with a hole
diameter of 0.281" (7.1mm) typical
clearance hole for 1/4" (6mm) bolts.
2. Molded barbs keep the clamp
secured in the hole during assembly.
B
3. Rivet installs easily by hand. No
special tools required.
A
Bundle
Diameter
C
Dimensions
in. (mm)
Part Number‡
A
B
Packaging*
Material
C
Color
Panel Hole
Size
in. (mm)
Panel
Thickness
in. (mm)
Std.
Pkg.
Qty.
Std.
Ctn.
Qty.
Bulk
Pkg.
Qty.
Bulk
Ctn.
Qty.
PC038-H25D-C0
3/8
(9.5)
.65
(16.5)
100
500
500
1000
PC050-H25D-C0
1/2
(12.7)
.71
(18.0)
100
500
500
1000
PC062-H25D-C0
5/8
(15.8)
.77
(19.6)
100
1000
500
1000
PC075-H25D-C0
3/4
(19.1)
100
1000
500
1000
100
1000
500
1000
.62
(15.7)
.84
(21.3)
Black
.275
(7.0)
.126
(3.2)
PC087-H25D-C0
7/8
(22.1)
PC100-H25D-C0
1
(25.4)
.96
(24.3)
100
1000
200
1000
PC112-H25D-C0
1 1/8
(28.5)
1.02
(25.9)
100
1000
200
1000
PC125-H25D-C0
1 1/4
(31.8)
1.08
(27.4)
100
1000
200
1000
116
Most commonly used parts appear in BOLD.
.90
(22.9)
Impact
Modified
Weather
Resistant
Nylon 6.6
*Order the number of pieces required in multiples of package quantities.
‡Part numbers listed are for standard materials in standard package quantity. For Bulk package part numbers, see page 137-138.
Cable and Wire Mounting Devices
Fixed Diameter
Cable Clamps
Durable nylon cable clamps are available
in two widths: 3/8" wide for standard use
and 1/2" wide for heavy duty use.
A
(Dia.)
C
D
(Dia.)
E
B
NOTE: All parts listed also available in black
weather resistant material (-0). Bulk package only.
Dimensions
in. (mm)
Part Number‡
Type of
Application
100
500
1000
5000
100
500
1000
5000
100
500
1000
5000
100
500
1000
5000
100
500
1000
5000
100
500
1000
5000
100
500
1000
5000
100
500
1000
5000
D
.17
(4.2)
CCS19-S8-C
.19
(4.8)
.43
(10.9)
.17
(4.2)
CCS25-S8-C
.25
(6.4)
.41
(10.4)
.17
(4.2)
.41
(10.4)
.20
(5.1)
.49
(12.4)
.17
(4.2)
.38
(9.5)
.57
(14.5)
.17
(4.2)
CCS44-S8-C
.44
(11.1)
.59
(15.0)
.17
(4.2)
CCS50-S8-C
.50
(12.7)
.60
(15.2)
.17
(4.2)
CCH12-S10-C
.13
(3.1)
.36
(9.1)
100
500
1000
5000
CCH19-S10-C
.19
(4.8)
.43
(10.8)
100
500
1000
5000
CCH25-S10-C
.25
(6.4)
.46
(11.7)
100
500
1000
5000
CCH31-S10-C
.31
(7.9)
.50
(12.7)
100
500
1000
5000
CCH38-S10-C
.38
(9.5)
.53
(13.5)
100
500
1000
5000
CCH44-S10-C
.44
(11.1)
.56
(14.2)
100
500
1000
5000
CCH50-S10-C
.50
(12.7)
.60
(15.1)
100
500
1000
5000
CCH56-S10-C
.56
(14.3)
.63
(15.9)
100
500
1000
5000
CCH62-S10-C
.63
(15.9)
.66
(16.8)
100
500
1000
5000
100
500
500
5000
CCS31-S8-C
CCS38-S8-C
CCH69-S10-C
Heavy
Duty
.31
(7.9)
.69
(17.5)
.50
(12.7)
.76
(19.2)
Color
Bulk
Ctn.
Qty.
C
.38
(9.5)
Material
Bulk
Pkg.
Qty.
.33
(8.4)
.25
(6.4)
E
Mounting
Method
.13
(3.1)
Standard
B
Where
Used
Std.
Ctn.
Qty.
CCS12-S8-C
CCS25-S10-C
A
Packaging*
Std.
Pkg.
Qty
#8 (M4)
Screw
#10 (M5)
Screw
#8 (M4)
Screw
.11
(2.6)
Nylon 6.6
.20
(5.1)
Natural
Indoors
#10 (M5)
Screw
CCH75-S10-C
.75
(19.1)
.79
(19.9)
100
500
500
5000
CCH81-S10-C
.81
(20.7)
.81
(20.7)
100
500
500
5000
CCH87-S10-C
.87
(22.2)
.85
(21.5)
100
500
500
5000
CCH100-S10-C
1.00
(25.4)
.91
(23.1)
100
500
500
5000
CCH112-S10-C
1.13
(28.6)
.97
(24.6)
—
—
100
500
CCH119-S10-C
1.19
(30.2)
1.00
(25.4)
—
—
100
500
CCH125-S10-C
1.25
(31.8)
1.06
(26.9)
—
—
100
500
CCH138-S10-C
1.38
(34.9)
1.13
(28.6)
—
—
100
500
CCH150-S10-C
1.50
(38.1)
1.19
(30.2)
—
—
100
500
.13
(3.1)
*Order the number of pieces required in multiples of package quantities.
‡Part numbers listed are for standard materials in standard package quantity (except CCH112 through CCH150).
For Bulk package part numbers, see page 137-138.
Most commonly used parts appear in BOLD.
117
Cable and Wire Mounting Devices
Tension
Wire Retainers
Wires slide into the clip and are held in place by tension.
1.44"
(36.5)
.38"
(9.5)
.36"
(9.1)
.06"
(1.5)
.56"
(14.2)
.38 RAD
(9.5)
Packaging*
Part Number‡
Bundle
Diameter
in. (mm)
Dimensions
in. (mm)
TWR-C
.38
(9.5)
TWR-C0
See Drawing
Tack Clips
Where
Used
Material
Color
Nylon 6.6
Natural
Indoors
Weather
Resistant
Nylon 6.6
Black
Indoors/
Outdoors
Mounting
Method
#6 (M3)
Screw
Std.
Pkg.
Qty.
Std.
Ctn.
Qty.
Bulk
Pkg.
Qty.
Bulk
Ctn.
Qty.
100
1000
1000
5000
100
1000
—
—
Used for securing wire, cable and tubing to nailable surfaces. The
clips are furnished with a single integral zinc plated, hardened steel
nail to help speed installation.
B
C
A
A
TYPE S
(SINGLE)
TYPE D
(DOUBLE)
Dimensions
in. (mm)
Bundle
Capacity
in. (mm)
Packaging*
Coaxial
Cross
RG#
Where
Used
Mounting
Method
Std.
Pkg.
Qty.
Std.
Ctn.
Qty.
Bulk
Pkg.
Qty.
Bulk
Ctn.
Qty.
Part Number
Type
A
B
C
TC3-5-C100
S
.13 dia.
(3.5)
.20
(5.1)
.29
(7.4)
.23
(5.8)
187
—
—
100
1000
TC5-7-C100
S
.21 dia.
(5)
.31
(7.9)
.39
(9.9)
.23
(5.8)
58
—
—
100
1000
TC7-10-C100
S
.26 dia.
(6.5)
.38
(9.7)
.49
(12.5)
.35
(8.9)
59
—
—
100
1000
6A
—
—
100
1000
—
—
100
1000
—
—
100
1000
—
—
100
1000
Material
Color
Nail is
hammered
into a nailable
surface such as
wood or
mortar joints.
Do not use on
concrete or brick.
TC10-14-C100
S
.36 dia.
(9.2)
.51
(13)
.59
(14.9)
.45
(11.4)
TC14-20-C100
S
.49 dia.
(12)
.67
(17)
.79
(20.6)
.54 8A, 9B, 11
(13.7)
TC5x8-C100
D
.20 x .30
(5 x 8)
.30
(8.8)
.54
(13.7)
.27
(6.8)
—
TC6x10-C100
D
.23 x .37
(6 x 9.5)
.34
(8.6)
.62
(15.7)
.34
(8.6)
—
TC7x14-C100
D
.26 x .46
(7 x 12)
.36
(9.1)
.70
(17.8)
.43
(10.9)
—
—
—
100
1000
TC9x18-C100
D
.38 x .65
(10 x 17)
.50
(12.7)
.89
(22.6)
.52
(13.2)
—
—
—
100
1000
118
Most commonly used parts appear in BOLD.
Weather
Indoors/
Resistant
Black
Outdoors
Polypropylene
*Order the number of pieces required in multiples of package quantities.
‡Part numbers listed are for standard materials in standard package quantity. For Bulk package part numbers, see page 137-138.
Cable and Wire Mounting Devices
Siding Clips
Attaches coax cable to buildings having “Pittsburgh Interlok” type aluminum
or steel siding. Will not corrode or stain siding. Low profile, installs without
drilling or nailing.
A
C
A
B
D
C
B
D
HSC Horizontal Clip
VSC Vertical Clip
Horizontal Siding Clip
Part Number‡
Vertical Siding Clip
Max.
Cable
Dia.
in. (mm)
Dimensions
in. (mm)
A
B
C
Packaging*
D
HSC.25-L
HSC.25-L100
VSC.25-L
VSC.25-L100
.50
(12.7)
.71
(18.0)
.34
(8.6)
.37
(9.4)
1.26
(31.8)
.98
(25.0)
1.00
(25.4)
.70
(17.8)
.25
(6.4)
Material
Color
Nylon 6.6
White
Weather
Resistant
Polypropylene
Black
Nylon 6.6
White
Weather
Resistant
Polypropylene
Mounting
Method
Attach
to
Siding
Std.
Pkg.
Qty.
Std.
Ctn.
Qty.
50
500
50
500
50
500
50
500
Black
*Order the number of pieces required in multiples of package quantities.
‡Part numbers listed are for standard materials in standard package quantity. For Bulk package part numbers, see page 137-138.
Most commonly used parts appear in BOLD.
119
Cable and Wire Mounting Devices
Wire Standoffs
For retaining wires, cable, components or tubing away from panel or
conductive chassis. Finger grip flanges can be easily locked or unlocked for
revisions. Hand installed in pre-drilled hole.
A
Max. Dia.
(when closed)
Easy to install and use.
1. Press wire standoff
through pre-drilled hole
in panel.
2. Load wires, cables, etc.
3. Press top flanges
together to lock.
B
Dimensions
in. (mm)
Part Number‡
WS25-25-C
WS25-50-C
WS25-75-C
WS35-25-C
WS35-50-C
WS35-75-C
WS50-25-C
WS50-50-C
WS50-75-C
WS75-25-C
WS75-50-C
WS75-75-C
A
.25
(6.4)
.25
(6.4)
.25
(6.4)
.35
(8.9)
.35
(8.9)
.35
(8.9)
.47
(11.9)
.47
(11.9)
.47
(11.9)
.78
(19.8)
.78
(19.8)
.78
(19.8)
B
.25
(6.4)
.50
(12.7)
.75
(19.1)
.25
(6.4)
.50
(12.7)
.75
(19.1)
.25
(6.4)
.49
(12.7)
.75
(19.1)
.25
(6.4)
.50
(12.7)
.75
(19.1)
Panel Dimensions
in. (mm)
Panel
Thickness
Hole
Diameter
.03 to .08
(0.7 to 2.0)
.19 to .20
(4.7 to 4.9)
Packaging*
Material
Where
Used
Color
Nylon 6.6
Natural
Indoors
Mounting
Method
Inserted into
Pre-Drilled
Hole
Std.
Pkg.
Qty.
100
Std.
Ctn.
Qty.
1000
Bulk
Pkg.
Qty.
—
Bulk
Ctn.
Qty.
—
100
1000
—
—
100
1000
—
—
100
1000
—
—
100
1000
—
—
100
1000
—
—
100
1000
—
—
100
1000
—
—
100
1000
—
—
100
1000
1000
5000
100
1000
1000
5000
100
1000
1000
5000
The clips hold wire bundles securely. Clips are placed on the bundle then
attached to the panel. Designed for pre-drilled holes.
Snap-In Clips
B
A
Part Number‡
SICH25-C
SICH38-C
SICH50-C
SICH75-C
SICH100-C
SICH150-C
120
Max.
Bundle
Dia.
in. (mm)
.25
(6.4)
.38
(9.6)
.50
(12.7)
.75
(19)
1.00
(25.4)
1.5
(38)
C
Dimensions
in. (mm)
A
.82
(20.9)
.98
(24.6)
1.11
(26.2)
1.40
(35.6)
1.65
(41.9)
2.15
(54.6)
B
.34
(8.6)
.50
(12.8)
.62
(15.7)
1.0
(25.4)
1.25
(31.8)
1.75
(44.5)
Most commonly used parts appear in BOLD.
Panel Dimensions
in. (mm)
Material
C
.40
(10.2)
.54
(13.7)
.67
(17.0)
Nylon 6.6
.96
(24.4)
1.21
(30.7)
1.71
(43.4)
Color
Natural
Where
Used
Indoors
Maximum
Hole
Thickness Diameter
.10
(2.5)
.25
(6.4)
Mounting
Method
Inserted into
Pre-Drilled
Hole
Std.
Pkg.
Qty.
100
Packaging*
Std.
Bulk
Ctn.
Pkg.
Qty.
Qty.
1000 1000
Bulk
Ctn.
Qty.
5000
100
1000
1000
5000
100
1000
1000
5000
100
1000
1000
5000
100
1000
—
—
100
1000
—
—
*Order the number of pieces required in multiples of package quantities.
‡Part numbers listed are for standard materials in standard package quantity. For Bulk package part numbers, see page 137-138.
Cable and Wire Mounting Devices
Wire Saddles
Funnel entry design for
fast insertion of wires
and cables. Used in
pre-drilled holes.
B
B
A
A
VWS
Vertical
Part Number‡
VWS4218-C
VWS4238-C
VWS4274-C
VWS42105-C
HWS2819-C
Max.
Bundle
Capacity
in. (mm)
.18 x .42
(5 x 11)
.40 x .42
(10 x 11)
.74 x .42
(19 x 11)
1.05 x .42
(27 x 11)
.19 x .28
(5 x 7)
Dimensions
in. (mm)
A
.58
(14.7)
.78
(19.8)
1.14
(29.0)
1.45
(36.8)
.42
(10.7)
Harness Clips
HWS
Horizontal
Panel Dimensions
in. (mm)
B
.60
(15.2)
.60
(15.2)
.60
(15.2)
.60
(15.2)
.44
(11.2)
Material
Color
Nylon 6.6
Natural
Where
Used
Packaging*
Std.
Panel
Hole
Mounting Pkg.
Thickness Diameter Method
Qty.
100
Std.
Ctn.
Qty.
500
Bulk
Pkg.
Qty.
1000
Bulk
Ctn.
Qty.
5000
100
500
1000
5000
100
500
1000
5000
100
500
1000
5000
100
500
1000
5000
.03-.08
(.79 - 2.0)
Indoors
.19
(4.7)
Inserted
into
Pre-Drilled
Hole
Integral “spring” holds wire bundles tightly. Used in pre-drilled holes.
Vertical, horizontal, and edge mount versions available.
0.17
(4.4)
0.157
(4)
C
C
0.433
(11)
A
A
A
B
B
Vertical
HCMP06B12
Part Number‡
HCMP06B12-C20
HCMP06C12-C20
HCME06A12-C130
Max.
Bundle
Dia.
Range
in. (mm)
.24-.47
(5.9-2.5)
Panel Dimensions
in. (mm)
Dimensions
in. (mm)
A
1.25
(31.8)
1.10
(27.9)
.59
(15.0)
B
.74
(18.8)
.80
(20.2)
.74
(18.7)
B
C
Material Color
.39
(10)
Nylon
6.6
.39
(9.9)
Acetal
Where Maximum
Hole
Used Thickness Diameter
Black Indoors
.11
(2.7)
.25
(6.4)
—
—
*Order the number of pieces required in multiples of package quantities.
‡Part numbers listed are for standard materials in standard package quantity. For Bulk package part numbers, see page 137-138.
C
Edge Mount
HCME06A12
Horizontal
HCMP06C12
Mounting
Method
in. (mm)
Inserted into
Pre-Drilled Hole
See Drawing
Std.
Pkg.
Qty.
100
Packaging*
Std.
Bulk
Ctn.
Pkg.
Qty.
Qty.
500
1000
Bulk
Ctn.
Qty.
5000
100
500
1000
5000
100
500
5000
10000
Most commonly used parts appear in BOLD.
121
Cable and Wire Mounting Devices
Wire Bundle Strap
Wire Bundle Strap provides a quick, durable and
inexpensive way to contain wire, cable and tubing.
It can be installed on wood, plywood, masonry
and other surfaces using standard fasteners.
D (Dia)
A
B
4.82
(122.56)
REF.
C
Part Number
WBS6-Q
Bundle Retaining Area
in2
Material
Color
6
ABS
Natural
Circuit Board Posts
A
1.00
(25.4)
Dimensions
in. (mm)
B
C
3.92
2.54
(99.6)
(64.5)
D
.25
(6.35)
Mounting
Method
Std.
Pkg.
Qty.*
Std.
Ctn.
Qty.
1/4 (M6) Screw
25
125
For board-to-board or board-to-chassis mounting.
Posts snap into pre-drilled holes.
Bell flange on bottom end provides greater stability.
.170
(4.3)
.187 Dia.
(4.7)
.140
(3.6)
.282
(7.2)
A
.140
(3.6)
Dimensions
in. (mm)
Packaging*
Std.
Pkg.
Qty.
Std.
Ctn.
Qty.
Bulk
Pkg.
Qty.
Bulk
Ctn.
Qty.
Standoff
Height
A
CBP12-C
.125
(3.2)
.405
(10.3)
100
1000
1000
5000
CBP25-C
.250
(6.4)
.530
(13.5)
100
1000
1000
5000
CBP31-C
.312
(7.9)
.592
(15.0)
100
1000
1000
5000
CBP37-C
.375
(9.5)
.655
(16.6)
100
1000
1000
5000
CBP50-C
.500
(12.7)
.780
(19.8)
100
1000
1000
5000
CBP62-C
.625
(15.9)
.905
(23.0)
100
1000
1000
5000
CBP75-C
.750
(19.1)
1.030
(26.2)
100
1000
1000
5000
CBP87-C
.875
(22.2)
1.155
(29.3)
100
1000
1000
5000
CBP100-C
1.00
(25.4)
1.280
(32.5)
100
1000
1000
5000
Part Number‡
122
Most commonly used parts appear in BOLD.
Material
Nylon 6.6
Color
Natural
Where
Used
Mounting
Method
in. (mm)
Indoors
For Circuit Boards
or Chassis:
.062 (1.5) thick
with .158 (4.0)
diameter
mounting holes
*Order the number of pieces required in multiples of package quantities.
Part numbers listed are for standard materials in standard package quantity. For Bulk package part numbers, see page 137-138.
Circuit Board Posts/Supports
Circuit Board
Locking Supports
For board-to-chassis support. Snap-in
design for fast assembly. Wing design on
chassis mounting provides constant tension
and stability.
Dimensions
in. (mm)
Standoff
Height
A
CBLS18-C
.187
(4.7)
.92
(23.4)
CBLS25-C
.250
(6.4)
.98
(24.9)
CBLS37-C
.375
(9.5)
1.11
(28.2)
CBLS50-C
.500
(12.7)
1.23
(31.2)
CBLS62-C
.625
(15.9)
1.35
(34.3)
CBLS75-C
.750
(19.1)
1.48
(37.5)
Part Number‡
Packaging*
Material
Nylon 6.6
*Order the number of pieces required in multiples of packaging quantities.
‡Part numbers listed are for standard materials in standard package quantity.
For Bulk package part numbers, see page 137-138.
Color
Natural
Where
Used
Indoors
Mounting
Method
in. (mm)
Std.
Pkg.
Qty.
Std.
Ctn.
Qty.
Bulk
Pkg.
Qty.
Bulk
Ctn.
Qty.
For Circuit Boards:
.062 (1.5) thick
with .158 (4.0)
diameter
mounting holes
100
500
1000
5000
100
1000
1000
5000
100
1000
1000
5000
100
1000
1000
5000
100
1000
1000
5000
100
1000
1000
5000
For Chassis:
.03 (.79) to .08 (2.0)
thick with
.185 (4.7) to
.193 (4.9)
diameter
mounting holes
Most commonly used parts appear in BOLD.
123
Harness Board Accessories
Harness Board Accessories
PANDUIT ® harness board accessories provide fast routing
and forming of wires in harness fabrication. They hold the
wires off the harness board at a uniform height for easy
application of cable ties. The accessories are designed for use
with various PANDUIT ® cable tie installation tools. The Low
accessories are used with hand-operated tools. The High
accessories are used with the automatic tools. To maintain the
harness at a uniform height of approx. 1.33" (33.8mm) (at the
center of the harness) above the board, use RER Elastic
Retainers, BR.75-E6 (or BR.5-E6), CPH.75-S8, TJF and
SHH1-S8 or SHH3-S8 harness board accessories. This
height is suitable for use with the PAT1M Fully Automatic
Cable Tie Installation system (page 60).
Wire Retainers —
RER Type Replaceable
Elastic Retainers
As wires are individually inserted, the bundle is formed. When harness
is complete, it can be easily snapped out. Three sizes available for
1/2" (12.7mm), 3/4" (19.0mm) and 2 1/4" (31.8mm) bundles.
Replacement Elastic
B
For economy, the elastic band can be
replaced in the RER Elastic Retainers
without removing the RER base.
Part
Number
A
Pkg.
Qty.
RER.5E-X
RER.75E-X
RER1.25E-X
C
10
10
10
E
D
Part Number
RER.5-S6-X
RER.75-S6-X
RER1.25-S6-X
Max.
Dia.
in. (mm)
.50
(12.7)
.75
(19.0)
1.25
(31.8)
Dimensions
in. (mm)
A
1.89
(48.0)
2.21
(56.1)
2.86
(72.6)
ER Type
Elastic Retainers
B
.84
(21.3)
1.12
(28.4)
1.64
(41.7)
C
D
.14
(3.6)
.14
(3.6)
.14
(3.6)
.18
(4.7)
Color
&
Material
E
1.18
(30.0)
Black Nylon 6.6
and
White Acetal
Mounting
Method
#6 (M3)
Screw
Std.
Pkg.
Qty.*
10
Std.
Ctn.
Qty.
50
10
50
10
50
ER Type retainers form wire bundles as wires are inserted. Completed
bundles then snap out. Two sizes available for 1/2" (12.7) and
1 1/4" (31.7) bundles.
B
A
D
C
E
Part Number
ER.5-E4-X
ER1.25-E4-X
124
Max.
Dia.
in. (mm)
.50
(12.7)
1.25
(31.8)
Dimensions
in. (mm)
A
1.00
(25.4)
2.00
(50.8)
B
1.00
(25.4)
2.40
(61.0)
C
D
.13
(3.2)
.12
(3.0)
E
1.96
(49.8)
2.90
(73.7)
Color
&
Material
Black
Nylon 6.6
and ABS
Mounting
Method
#4 (M2.5)
Screws
Std.
Pkg.
Qty.*
10
Std.
Ctn.
Qty.
100
10
100
*Order the number of pieces required in multiples of package quantities.
Most commonly used parts appear in BOLD.
Harness Board Accessories
Bundle Retainers
Spring fingers with large lead in facilitate fast routing of wires and easy removal of
completed harness. Overlapping feet on the BR.5 and BR.75 allow the retainers
to be butted together for wire breakouts. Three sizes available for 1/2" (12.7mm),
3/4" (19.0mm) and 2.00" (50.8mm) bundles.
D
BR.5 and BR.75
BR2
BR2-1.3
D
D
B
A
C
B
C
A
B
A
C
Part Number
BR.5-E6-C
BR.75-E6-C
Max.
Dia.
in. (mm)
.50
(12.7)
.75
(19.0)
BR2-1.3-X
BR2-1.3-A-X
BR2-1.5-X
BR2-4-X
Dimensions
in. (mm)
A
1.07
(27.2)
.95
(24.1)
1.32
(33.5)
2.00
(50.8)
BR2-6-X
1.59
(40.4)
4.00
(101.6)
6.00
(152.4)
B
C
.44
(11.2)
.78
(19.8)
2.25
(57.2)
2.50
(63.5
2.18
(55.4)
Corner Posts
2.56
(65.0)
D
.55
(14.0)
.76
(19.4)
Color
&
Material
Packaging*
Std.
Std.
Pkg.
Ctn.
Qty
Qty.
100
500
Mounting
Method
(2) #6 (M3) Screws
Black
Acetal
(2) 1/4 (M6) Screws
Rubber Adhesive 2.0 lbs
(907g) Static Load
2.12
(54.0)
(2) 1/4 (M6) Screws
100
500
10
10
100
100
10
100
10
100
10
100
Designed to pre-form tight bundles at harness corners and breakouts.
The top arm pivots for easy removal of completed harness.
CPH Corner Post, High
CPL Corner Post, Low
.172" Dia. Hole
(4.4)
.172" Dia. Hole
(4.4)
A
C
A
D
C
E
E
B
Dimensions
in. (mm)
Part Number
Max.
Dia.
in. (mm)
CPH.75-S8-X
CPL.75-S8-X
.75
(19.0)
A
1.88
(47.8)
1.08
(27.4)
B
1.60
(40.8)
1.52
(38.6)
C
1.35
(34.4)
.56
(14.2)
D
.90
(22.9)
.88
(22.4)
E
1.18
(30.0)
1.11
(28.2)
D
Color
&
Material
Black
Nylon 6.6
Mounting Method
B
Packaging*
Std.
Std.
Pkg.
Ctn.
Qty*
Qty.
10
100
(2) #8 (M4) Screws
10
100
*Order the number of pieces required in multiples of package quantities.
Most commonly used parts appear in BOLD.
125
Harness Board Accessories
T-Junction Fixture
Using an integrated harness board nail, the T-Junction Fixture moves to
form harnesses. When the harness is complete, the fixture can be
pushed down for easy harness removal.
E
(Dia)
A
B
In the “up” position
to form harness.
Part Number
TJF-X
C
In the “down”
position to tie and
remove harness.
D
Max.
Bundle
Dia.
in. (mm)
A
B
C
D
1.34
(34.0)
.75
(19.0)
.12
(3.0)
1.39
(35.1)
.70
(17.8)
Dimensions
in. (mm)
Wire End Holder
E
Color
&
Material
Mounting
Method
1.12
(28.4)
Black Nylon 6.6 and
Nickel Plated Steel
Integral
Nail
Secures wire ends with or without terminations
while harness is being fabricated. Wires can be
easily added or removed from the top, but will
hold the wire from axial movement. Used with
#28 through #16 AWG wires.
Std.
Pkg.
Qty.*
Std.
Ctn.
Qty.
10
100
.16
(4.1)
E
D C
A
F
B
Dimensions
in. (mm)
Part Number
WEH-E8-C
A
B
C
D
E
F
Color
&
Material
Mounting
Method
1.22
(31.0)
.37
(9.4)
.77
(20.0)
.53
(13.5)
.29
(7.4)
.18
(4.6)
Black
Acetal
(2) #8 (M4)
Screws
Harness Board Nails
Std.
Pkg.
Qty.*
Std.
Ctn.
Qty.
100
1000
Speeds routing of wires. All of the nails have a
uniform driving depth insured by a collar stop.
Smooth finish on the nails, will not abrade
wire jackets.
C
Dia.
B
A
D
Dimensions
in. (mm)
Part Number
Material
Std.
Pkg.
Qty.*
Std.
Ctn.
Qty.
A
B
C
HBN.75-T
1.40
(35.6)
.75
(19.0)
.075
(1.9)
200
1000
HBN1-T
1.65
(41.9)
1.00
(25.4)
.075
(1.9)
200
1000
HBN1.5-T
2.15
(54.6)
1.50
(38.1)
.084
(2.1)
200
1000
HBN2-T
2.65
(67.3)
2.00
(50.8)
.093
(2.4)
200
1000
HBN2.5-T
3.17
(80.5)
2.50
(63.5)
.107
(2.7)
200
1000
HBN3-T
3.67
(93.2)
3.00
(76.2)
.122
(3.1)
200
1000
HBN4-T
4.67
(118.6)
4.00
(101.6)
.142
(3.6)
200
1000
126
D
Mounting
Method
.62
(15.8)
Nickel Plated
Steel
Hammered
into
harness
board
*Order the number of pieces required in multiples of package quantities.
Most commonly used parts appear in BOLD.
Harness Board Accessories
Fanning Strip System
Assures that wires are held in a particular orientation in sophisticated
wiring harnesses. Consists of fanning strip and fanning strip holder.
Contains evenly spaced “snap slots” to hold wires
in place. No sharp edges to damage wire
insulation. Becomes part of the wiring harness. Will
accept wires up to 18 AWG. Used with FSH40 or
FSHH holders.
Fanning Strip (FS156)
Fanning Strip Holders
Low Holder (FSH40-X)
High Holder (FSHH-X)
E
F
Used in conjunction with RER.75-S6,
BR.75-E6 (BR.5-E6) and CPH.75-S8.
Ideal for use with PAT cable tie tool.
B
C
D
A
Dimensions
in. (mm)
A
B
C
D
E
F
Color
&
Material
FS156-C
12.1
(307.3)
.31
(7.9)
.04
(1.0)
.12
(3.0)
.156
(4.0)
.06
(1.5)
Natural
Nylon 6.6
Fanning
Strip Holder
FSH40-X
6.0
(152.4)
.62
(15.7)
.56
(14.2)
1.50
(38.1)
.75
(19.0)
.04
(1.0)
3.2
(81.3)
1.4
(36.0)
.60
(15.2)
1.10
(28.0)
.53
(13.5)
.04
(1.0)
Black
ABS
#8 (M4)
Screws
Part Number
FSHH-X
Mounting
Method
Std.
Pkg.
Qty.*
100
10
10
*Order the number of pieces required in multiples of packaging quantities.
Most commonly used parts appear in BOLD.
127
Harness Board Accessories
Spring Wire
Breakout System
Separates and holds wires in a harness while the rest of the
harness is being formed. The wires simply pull out from the
spring when the harness is complete.
SHH Spring Holder
PBSC Spring
Wire Breakout
.188" Dia.
(4.8)
Each SHH Spring Holder is supplied
with (1) rigid wire piece to hold the
spring laterally and two #8 (M4) 2"
(50.8) hex head wood screws. Two
sizes available for use with PBSC1
and PBSC6.
B
A
C
A
B
Dimensions
in. (mm)
Part Number
A
PBSC1-X
1.00
(25.4)
PBSC3-X
3.00
(76.2)
PBSC6-X
6.00
(152.4)
PBSC12-X
12.00
(304.8)
SHH1-S8-X
1.85
(47.0)
SHH3-S8-X
128
6.85
(174.0)
B
.44
(11.2)
1.30
(33)
Packaging*
C
—
.53
(13.4)
Material
in. (mm)
.035 (.9)
Thick
Steel
Nylon 6.6
Color
—
Black
Mounting
Method
Std.
Pkg.
Qty.
Std.
Ctn.
Qty.
Used with SHH1 Spring Holder
10
100
(2) #8 (M4) Screws
10
100
Used with SHH3 Spring Holder
10
100
(2) #8 (M4) Screws
10
100
(2) #8 (M4)
Screws used with PBSC1
10
100
(2) #8 (M4)
Screws used with PBSC3 or PBSC6
10
100
*Order the number of pieces required in multiples of packaging quantities.
Most commonly used parts appear in BOLD.
Harness Board Accessories
Harness Board Standoff Posts
Used to hold a push mount accessories or a push mount cable tie at a
specific location on a harness board. The Standoff Post is placed over a hole
in the harness board, a bolt is then threaded into the bottom of the standoff
from the backside of the board and tightened. Push mount accessories are
inserted into the top of the Standoff Post prior to assembly. When the
assembly is complete, the harness and the attached push mount are
removed from the Standoff Post.
B
C
(Dia)
A
Packaging*
Dimensions
in. (mm)
Part Number
HB2SP19-X
HB4SP19-X
HB6SP19-X
HB2SP25-X
HB4SP25-X
A
2.00
(50.8)
4.00
(101.6)
6.00
(152.4)
2.00
(51)
4.00
(101.6)
B
C
Used With
Part Numbers
.20
(5.2)
PLWP, PRWP, WS,
VWS, HWS, TPM
.50
(12.7)
Material
Aluminum
.295
(7.5)
PLWP, PRWP, PLP,
THMS, HCMP, PMCC
Mounting
Method
1/4 (M6)
Screw
Std.
Pkg.
Qty.
10
Std.
Ctn.
Qty.
100
10
100
10
100
10
100
10
100
*Order the number of mounts required in multiples of package quantities.
Most commonly used parts appear in BOLD.
129
Communication Cable Management
The product is designed with rounded edges for routing fiber optic cables.
This feature provides a very smooth surface to eliminate the potential for
snagging and putting stress on the fiber optic cable.
Optical Fiber
Network Saddles
B
B
C
A
C
A
D
D
VWSDC Dual Capacity Type
VWS Push Mount Type
Part Number‡
VWS106-C
VWS106-C20
VWSDC-C
Max.
Bundle
Dia.
in. (mm)
1.06
(26.9)
Dimensions
in. (mm)
A
1.65
(41.7)
2.64
(66.8)
Panel Dimensions
in. (mm)
B
C
1.18
1.30
(29.9) (31.8)
1.26
2.36
(32.0) (59.9)
Waterfall Accessories
D
.34
(8.6)
.39
(9.9)
Material
Nylon 6.6
Color
Natural
Black
Natural
Where
Used
Indoors
Packaging*
Mounting
Maximum
Hole
Method
Thickness Diameter in. (mm)
.09
(2.3)
.187
(4.7)
Std.
Pkg.
Qty.
100
Inserted
100
into
Pre-Drilled 100
Hole
Std.
Ctn.
Qty.
500
500
1000
Bulk
Pkg.
Qty.
1000
1000
500
Bulk
Ctn.
Qty.
5000
5000
2500
PANDUIT ® Waterfall Accessory provides bend radius control in both
vertical and horizontal directions when transferring cables from
standard ladder rack. Installs easily to the rung or a stringer of the
ladder rack with PANDUIT ® PLT series cable ties, provided in every
package. PANDUIT ® Waterfall Accessories are part of a complete
cable management system.
CMWB-Waterfall Base
CMW-Kit
CMWW-Waterfall Wing
Packaging*
Part Number
CMW-KIT
CMW-KIT10
CMWB
CMWB10
CMWW
CMWW10
130
Bend Radius
Limit
in. (mm)
Material
Black
—
1.75
(44.45)
1.0
(25.4)
Color
Glass Filled
Flame
Retardant
Nylon 6.6
Most commonly used parts appear in BOLD.
White
Black
White
Black
White
Width
in. (mm)
Height
in. (mm)
9.60
(243.8)
6.07
(154.18)
One Base, Two Wings, and Three Cable Ties.
5.24
(133.1)
3.07
(77.98)
One Base and Three Cable Ties.
2.00
(50.6)
4.87
(123.7)
One Bend Radius Control Wing.
Included in Package
Std.
Pkg.
Qty.*
Std.
Ctn.
Qty.
1
10
*Order the number of pieces required in multiples of package quantities.
‡Part numbers listed are for standard materials in standard package quantity. For Bulk package part numbers, see page 137-138.
Communication Cable Management
Stackable Cable
Rack Spacers
PANDUIT ® Stackable Cable Rack Spacers separate and support
cable on standard ladder racks. This product prevents pinch points
between the bottom row of cable and the ladder rack rung as a result
of the weight of multiple cable layers applied on top of each other.
Maximize rack space by stacking products for maximum
cable capacity.
CRS1 & CRS1-125
CRS4-125
CRS6
Packaging*
Part Number
Cable
Bundles
CRS4-125-X
4
CRS1-125-X
1
CRS6-X
6
CRS1-X
1
Bundle Diameter
in. (mm)
1.25
(31.75)
Material
Color
Polycarbonate/ABS
Blend
Vertical D-Rings
Width
in. (mm)
5.24
(133.1)
Glass Filled Flame
Retardant
Nylon 6.6
Black
0.8
(20.32)
Mounting
Method
Stack
Height
in. (mm)
Standard
Cross
Section
Cable
Ties
Std. Std.
Pkg. Ctn.
Qty. Qty.
1.42
(36.07)
1.55
(39.4)
10
5.25
(133.35)
100
1.00
(25.4)
1.13
(28.58)
The PANDUIT ® Vertical D-Ring provides open access
cable management. The front arm of the D-Ring rotates
90° to allow entire cable bundles to be inserted. Screw
holes are spaced according to EIA standards and allow
for installation on standard equipment racks.
B
C
E
A
B
C
A
D
D
8.25 (REF)
E
CMVDR1, CMVDR1S
CMVDR2, CMVDR2S
CMVDRC
Dimensions
in. (mm)
Part Number
A
CMVDR1
4.80
(121.9)
CMVDR1S
2.4
(60.9)
CMVDR2
4.80
(121.9)
CMVDR2S
2.40
(60.9)
CMVDRC
4.72
(119.88)
B
1.18
(30.0)
2.40
(60.9)
5.09
(129.29)
C
5.72
(145.2)
3.26
(82.8)
5.72
(145.2)
3.26
(82.8)
5.66
(143.64)
Packaging*
D
E
Material
Color
Flame Retardant
Polycarbonate
Black
Mounting
Method
Std.
Pkg.
Qty.
Std.
Ctn.
Qty.
1
10
2.05
(52.07)
1.75
(44.45)
3.30
(83.82)
8.75
(222.25)
(2) 1/4 (M6)
Screws
1.12
(28.58)
*Order the number of pieces required in multiples of package quantities.
Most commonly used parts appear in BOLD.
131
Communication Cable Management
Threaded Rod Cover
PANDUIT ® Threaded Rod Cover protects cables from abrasion
caused by contact with threaded rod.
• Manufactured from material that meets UL94V-0 specifications
• Soft material for easy installation
• Available in 18" lengths
Packaging*
Part Number
TRC18FR-X8
For Threaded
Rod Size
in. (mm)
1/2 to 5/8
(12.7) to (15.88)
TAK-TY ® Hook & Loop
Cable Tie Mounts
Material
Color
Std.
Pkg.
Qty.
Flame Retardant Polyethylene
Gray
10
Std.
Ctn.
Qty.
100
Mounting base for use with 3/4" TAK -TY ® Hook & Loop
Cable Ties
• For indoor use only
1.10
(27.94)
.142
1.10
(27.94)
.87
(22.10)
.34
(8.64)
.11
(2.79)
.68
(17.27)
Packaging*
Part Number‡
Used with Cable Ties
ABMT-A-C
Rubber Adhesive
ABMT-A-C20
ABMT-S6-C
ABMT-S6-C20
Mounting Method
TAK -TY ® „
Hook & Loop
Cable Ties
ABMT-S6-C60
Maximum
Static Load
lbs. (g)
Material
Color
Nylon 6.6
ABMT-S6-C69
100
1000
Black
Natural
Black
—
Std.
Ctn.
Qty.
Natural
.38 (172)
#6 (M3) Screw
Std.
Pkg.
Qty.
Flame
Retardant
Nylon 6.6
Black
Natural
„Used with all PANDUIT ® HLC/HLT/HLS and HLM TAK-TY ® options found on page 40.
132
Most commonly used parts appear in BOLD.
*Order the number of pieces required in multiples of package quantities.
‡Part numbers listed are for standard materials in standard package quantities. For Bulk package part nu mbers, see page 137-138.
Communication Cable Management
Flat PAN -POST ™ Standoff
Used to secure cable in vertical or horizontal configurations.
Mounting hole configuration meets EIA/TIA specifications for
use on racks or in enclosures.
.61
(15.5)
.61
(15.5)
REF
.28
(7.2)
1.50
(38.1)
REF
.75
(19.0)
.26
(6.6)
1.62
(41.3)
REF
.40
(10.2)
TYP
1.38
(34.9)
.37
(9.4)
TYP
.19
(4.8)
REF
.19
(4.8)
REF
5.60
(142.2)
5.50
(139.7)
PPF2S
Part Number
PPF2S-S25-V
PPF2S-S25-V69
PPF2SV-S25-V
PPF2SV-S25-V69
Used
With
Cable
Ties**
Packaging*
Color
&
Material
Std.
Pkg.
Qty.
Std.
Ctn.
Qty.
Natural Nylon 6.6
5
50
Natural Flame Retardant Nylon 6.6
5
50
5
50
5
50
Dimensions
in. (mm)
M, I, S
M, I, S, HS, LH, H,
HLM„
PPF2SV
See
Drawing
Mounting
Method
Natural Nylon 6.6
(2) 1/4 (M6)
Screws
Natural Flame Retardant
Nylon 6.6
„Used with all PANDUIT ® Hook & Loop Cable Ties found on page 40.
Communication Cable
Management Kit for Cabinets
Kit of wire management accessories specifically designed
for use in a network cabinet or enclosure.
Kit includes the following:
• TAK -TY ® Hook & Loop cable tie (HLM-15R0)/1 roll
• Nylon Cable tie (ILT3S)/24 pieces
• Adhesive backed mounts (ABM3H-A and ABM112-A)
6 pieces each
• Flat Post Standoff (PPF2S-S25)/8 pieces
• Push mount (PWMS-H25)/6 pieces
• Vertical wire saddle (VWS106)/4 pieces
Packaging*
Part Number
CCMKIT1
*Order the number of pieces required in multiples of package quantities.
‡Part numbers listed are for standard materials in standard package quantities. For Bulk package part numbers, see page 137-138.
**Cable Tie Cross Section Sizes: M = Miniature, I = Intermediate, S = Standard, HS = Heavy Standard, LH = Light-Heavy and H = Heavy.
Std.
Pkg.
Qty.
1
Std.
Ctn.
Qty.
100
Most commonly used parts appear in BOLD.
133
Selection and Use of Adhesive Mounts
General Introduction
PANDUIT ® adhesive mounts provide a quick, economical and dependable method of supporting, routing
and protecting wires or cables. Some are used with PANDUIT ® cable ties and others can be used without
cable ties. Adhesive backed mounts adhere to a variety of surfaces. This alternative to mechanical fasteners
offers the advantage of lower installed cost with safe, easy to use, quality products.
Applications
•
•
•
•
•
To route wires in control panels and switchboards
To support bundles of wires away from moving mechanical devices
Routing and harnessing cables, both indoors and out, to prevent safety hazards
To organize flat cables in many locations with low profile construction
Ideal for supporting wire bundles where holes cannot be put into the substrate
• To separate groups of wires for identification
Markets
•
•
•
•
•
Original Equipment Manufacturers (OEM)
Construction Industry
Telecommunication Systems
CATV
Aerospace Industry
•
•
•
•
•
Utilities
Electronic Components
Transportation Industry
Appliance Manufacturers
Maintenance and Repair
Operations (MRO)
General Mount Guidelines
PANDUIT ® pressure sensitive adhesive (foam tape) mounts are intended to secure wire bundles or other
light objects to smooth surfaces. These mounts are not designed to support excessive loads and should not
be used when the maximum expected load exceeds the rated capacity of the mount.
Choosing the Right Adhesive
PANDUIT ® offers two standard pressure sensitive foam tapes which are available on most adhesive backed
wiring accessories products. The general purpose tape is produced with a rubber based adhesive and is
identified by an “-A” in the part number. This tape develops its strength extremely fast and can be used
in environments with temperatures ranging from -20°F to +120°F. It is recommended that rubber based
adhesive mounts dwell 2 hours after installation, prior to loading. Rubber based adhesive tape is the best
choice for most adhesive mount applications, including powder coated surfaces.
Acrylic based adhesive tape is also available and is identified by an “-AT” in the part number. This tape is for
use in environments where continuous exposure to temperatures as high as 180°F is possible. Acrylic
based adhesive develops its maximum strength over a longer period of time than rubber based adhesive.
It is recommended that acrylic adhesive mounts dwell 8 hours after installation, prior to loading. Acrylic
based adhesive tape is a good choice for environments with prolonged exposure to UV rays or
temperatures above 120°F.
PANDUIT ® also offers a two-part epoxy for use in applications where excessive loading is required, or
where the surface to which the mount must be applied is porous rather than smooth. This adhesive is
formulated specifically for use on PANDUIT ® mounts, and is packaged in pre-measured cups to insure the
proper ratio of resin and hardener are mixed, eliminating wasted epoxy.
134
Most commonly used parts appear in BOLD.
Selection and Use of Adhesive Mounts
Application Chart
Since PANDUIT ® manufactures adhesive
backed mounts with a variety of adhesive
types, this chart should be used as a
guideline for choosing the best adhesive
for often-encountered conditions. Each
type of adhesive is rated good, fair or
poor for some specific mounting surfaces
and/or chemical environments.
Mount Spacing
To determine the number of mounts to
use in a given application, the following
formula can be used as a guideline:
Cable or weight (lbs./ft.)
Static Load rating of Mount (lbs/mt.)
Surfaces
Plastics
Wood
Glass
Painted Surfaces
Powder Coating
Metal
Paper
Concrete, Stone, Masonry
Rubber Based
Acrylic Based
Epoxy Applied
Foam Tape Mounts Foam Tape Mounts Adhesive Mounts
Good
Good
Fair
Good
Good
Good1
Good
Not Recommended
Good
Good
Good
Good
Fair
Good1
Good
Not Recommended
Good
Good
Good
Fair
Good
Good
Fair
Good
Good
Poor
Poor
Poor
Good
Poor
Not Recommended
Good
Fair3
Fair3
Fair3
Fair3
Fair3
Good
Poor
Good
Fair
Fair
Fair
Not Recommended
Good2
Chemical Resistance
Water
Oil
Gasoline
Dilute Acids
Dilute Alkalis
Organic Solvents
Outdoor Exposure
1. Not recommended for use on copper or brass.
2. Mounts manufactured from outdoor material only. For specific applications, individual testing prior to extensive
use is suggested.
3. Depends on concentration, exposure time and chemical composition.
=
Spacing
Mounts
Ft.
For specific applications we recommend individual testing prior to production use.
Surface Preparation
For best results, PANDUIT ® adhesive mounts should be applied to clean, dry, grease-free surfaces. We
recommend that the surface be cleaned prior to mount installation. For rubber and acrylic based foam tape
adhesives, a blend of isopropyl alcohol and water 50/50 may be used to clean most surfaces.
For epoxy type adhesives, especially masonry surfaces, be sure to clean all loose particles away before
mount installation. Some surface abrasion is recommended to achieve maximum strength. A light rubbing
with medium grit emery cloth or sandpaper is best. Wash after abrading.
Proper Installation Techniques For Pressure Sensitive Adhesive Mounts
For proper installation of adhesive mounts with foam tape, simply remove the release liner and place the
mount in the desired location. Avoid touching the adhesive prior to positioning the mount. Apply firm
pressure to the mount for 5 seconds to insure proper adhesion.
12
3
Clean surface with a clean
cloth and isopropyl alcohol.
Allow surface to air dry.
Remove the release liner,
being careful not to touch
the adhesive.
Apply full thumb pressure
for at least 5 seconds.
Allow mount to
properly dwell.
Epoxy Adhesive Mounts
PANDUIT ® EMA adhesive is a two-part epoxy cement which is packaged in convenient mixer cups
containing an equal amount of resin and hardener. Peel the protective covering off and pop the center of the
cup in to form a mixing bowl. Each cup is supplied with a mixer stick and contains enough epoxy to properly
apply three EMS mounts. The resin and hardener should be thoroughly mixed together until the epoxy is a
consistent and uniform color. The mixer stick can then be used to apply the adhesive to the mount. The
epoxy should be forced into the grooves on the bottom of the mount to obtain optimum bond performance.
The mount should be applied to the surface with light pressure and a back-and-forth twisting motion.
Hardening of the epoxy begins five minutes after mixing at room temperature.
Most commonly used parts appear in BOLD.
135
Selection and Use of Adhesive Mounts
Proper Storage Conditions
All PANDUIT ® adhesive products have an expiration date printed on the package label. Use the following
storage guidelines:
1. For rubber and acrylic based foam tape adhesives, store in temperatures of 70°F (21°C) and 45%
Relative Humidity (R.H.).
2. For epoxy type adhesives, store in temperatures of 40°F (4°C) to 75°F (25°C) and relative humidity not in excess of
45%. Storage in opened containers is not recommended. Using the guidelines above, the shelf life of foam tape is 3
years. Shelf life of epoxy is 1 year. Deviation from the recommended storage conditions may reduce the shelf life or
adhesive strength. In any case, adhesive products should never be stored near heating vents or other heat sources,
and storage in lower temperatures than those recommended may increase the shelf life.
Stock Rotation
Best-If-Used-By Date
Quality Control Number
Adhesive mount inventory should be rotated in order to insure
the quality of the adhesive foam tape. Each package of
PANDUIT ® adhesive backed mounts has a Quality Control
Number and a best-if-used-by date on the package label. The
best-if-used-by date provides the customer with an accurate
way to control the rotation of inventory, and, as is the case with
all PANDUIT ® products, the Quality Control Number provides
complete traceability for all components that go into a specific
production run of product.
Mount Removal
There is no simple or easy method for removing PANDUIT ® adhesives. A thin wire or razor blade can be moved in
between the surfaces when removing foam tape mounts; however, the adhesive residue will remain on the surface.
Epoxy adhesives may be removed with a commercial paint stripping solution.
136
Most commonly used parts appear in BOLD.
Wiring Accessories Bulk Package Part Numbers
Bulk Package Part Numbers
The following is an alpha-numeric cross reference of Standard Package Wiring Accessories parts with the corresponding Bulk Package part numbers.
Standard Part No.
Bulk Part No.
Standard Part No.
A
Bulk Part No.
Standard Part No.
C
Bulk Part No.
E
ABMM-A-C
ABMM-AT-C
ABMM-A-D
ABMM-AT-D
CBLS18-C
CBLS25-C
CBLS18-M
CBLS25-M
EMA-X
EMS-A-C
STD. ONLY
EMS-A-D
ABMM-AT-C0
ABMS-A-C
ABMM-AT-D0
ABMS-A-D
CBLS37-C
CBLS50-C
CBLS37-M
CBLS50-M
EMS-A-C0
EMSK3-1-3-0
EMS-A-D0
EMSK3-1-3-X
ABM1M-A-C
ABM1M-AT-C
ABM1M-A-M
ABM1M-AT-M
CBLS62-C
CBLS75-C
CBLS62-M
CBLS75-M
EMSK3-1-X0
EMSK12-4-12-X0
EMSK3-1-C0
EMSK12-4-12-C0
ABM100-A-C
ABM100-A-D
CBP12-C
CBP12-M
ABM100-AT-C
ABM100-AT-C0
ABM100-AT-D
ABM100-AT-D0
CBP25-C
CBP31-C
CBP25-M
CBP31-M
ABM100-S6-C
ABM100-S6-C69
ABM112-A-C
ABM112-AT-C
ABM112-AT-C0
ABM112-S6-C
ABM112-S6-C69
ABM2S-A-C
ABM2S-AT-C
ABM2S-AT-C0
ABM3H-A-L
ABM3H-AT-L
ABM4H-A-L
ABM4H-AT-L
ACC19-A-C
ACC19-A-C20
ACC19-AT-C
ACC19-AT-C0
ACC38-A-C
ACC38-A-C20
ACC38-AT-C
ACC38-AT-C0
ACC62-A-C
ACC62-A-C0
ACC62-A-C20
ACC62-AT-C0
AM2-C
ARC.68-A-Q
ABM100-S6-D
ABM100-S6-D69
ABM112-A-D
ABM112-AT-D
ABM112-AT-D0
ABM112-S6-D
ABM112-S6-D69
ABM2S-A-D
ABM2S-AT-D
ABM2S-AT-D0
ABM3H-A-T
ABM3H-AT-T
ABM4H-A-T
ABM4H-AT-T
ACC19-A-M
ACC19-A-M20
ACC19-AT-M
ACC19-AT-M0
ACC38-A-M
ACC38-A-M20
ACC38-AT-M
ACC38-AT-M0
ACC62-A-M
ACC62-A-M0
ACC62-A-D20
ACC62-AT-M0
AM2-M
ARC.68-A-C
CBP37-C
CBP50-C
CBP62-C
CBP75-C
CBP87-C
CBP100-C
CCS12-S8-C
CCS12-S8-C0
CCS19-S8-C
CCS19-S8-C0
CCS25-S8-C
CCS25-S8-C0
CCS25-S10-C
CCS25-S10-C0
CCS31-S8-C
CCS31-S8-C0
CCS38-S8-C
CCS38-S8-C0
CCS44-S8-C
CCS44-S8-C0
CCS50-S8-C
CCS50-S8-C0
CCH12-S10-C
CCH12-S10-C0
CCH19-S10-C
CCH19-S10-C0
CCH25-S10-C
CCH25-S10-C0
CBP37-M
CBP50-M
CBP62-M
CBP75-M
CBP87-M
CBP100-M
CCS12-S8-M
CCS12-S8-M0
CCS19-S8-M
CCS19-S8-M0
CCS25-S8-M
CCS25-S8-M0
CCS25-S10-M
CCS25-S10-M0
CCS31-S8-M
CCS31-S8-M0
CCS38-S8-M
CCS38-S8-M0
CCS44-S8-M
CCS44-S8-M0
CCS50-S8-M
CCS50-S8-M0
CCH12-S10-M
CCH12-S10-M0
CCH19-S10-M
CCH19-S10-M0
CCH25-S10-M
CCH25-S10-M0
ARC.68-A-Q14
ARC.68-S6-Q
ARC.68-S6-Q14
ASMS-A-X
ASMS-A-X0
ARC.68-A-C14
ARC.68-S6-C
ARC.68-S6-C14
ASMS-A-T
ASMS-A-T0
CCH31-S10-C
CCH31-S10-C0
CCH38-S10-C
CCH38-S10-C0
CCH44-S10-C
CCH44-S10-C0
CCH50-S10-C
CCH50-S10-C0
CCH56-S10-C
CCH56-S10-C0
CCH62-S10-C
CCH62-S10-C0
CCH69-S10-C
CCH69-S10-C0
CCH75-S10-C
CCH75-S10-C0
CCH81-S10-C
CCH81-S10-C0
CCH87-S10-C
CCH87-S10-C0
CCH100-S10-C
CCH100-S10-C0
CCH31-S10-M
CCH31-S10-M0
CCH38-S10-M
CCH38-S10-M0
CCH44-S10-M
CCH44-S10-M0
CCH50-S10-M
CCH50-S10-M0
CCH56-S10-M
CCH56-S10-M0
CCH62-S10-M
CCH62-S10-M0
CCH69-S10-D
CCH69-S10-D0
CCH75-S10-M
CCH75-S10-M0
CCH81-S10-M
CCH81-S10-M0
CCH87-S10-M
CCH87-S10-M0
CCH100-S10-M
CCH100-S10-M0
B
BCS-L100
BCS-C115
BEC38-A-L
BEC38-A-L20
BEC38-A-L0
BEC62-A-L
BEC62-A-L20
BEC62-A-L0
BEC75-A-L
BEC75-A-L20
BEC75-A-L0
BECP38H25-L
BECP38H25-L20
BECP75H25-L
BECP75H25-L20
BCS-D100
BCS-D115
BEC38-A-T
BEC38-A-T20
BEC38-A-T0
BEC62-A-T
BEC62-A-T20
BEC62-A-T0
BEC75-A-T
BEC75-A-T20
BEC75-A-T0
BECP38H25-T
BECP38H25-T20
BECP75H25-T
BECP75H25-T20
F
FCBI1-S10-C20
FCBI1-S10-M20
FCBI2-S10-C20
FCBI3-S10-C20
FCC5-A-C8
FCC-A-C8
FCH2-A-C14
FCM1-A-C14
FCM1-S6-C14
FCM2-A-C14
FCM2-S6-C14
FCM1.2-A-C14
FCM1.2-S6-C14
FCM3.25-A-L14
FCM3.25-S6-L14
FCPI1-C20
FCPI2-C20
FCPI3-C20
FCBI2-S10-M20
FCBI3-S10-M20
FCC5-A-D8
FCC-A-D8
FCH2-A-T14
FCM1-A-T14
FCM1-S6-T14
FCM2-A-T14
FCM2-S6-T14
FCM1.2-A-T14
FCM1.2-S6-T14
FCM3.25-A-T14
FCM3.25-S6-T14
FCPI1-M20
FCPI2-M20
FCPI3-M20
H
HCME06A12-C130
HCMP06B12-C20
HCMP06C12-C20
HWS2819-C
HCME06A12-M130
HCMP06B12-M20
HCMP06C12-M20
HWS2819-M
K
KIMS-H366-C2
KIMS-H430-C6
KIMS-H500-C4
KIMS-H366-M2
KIMS-H430-M6
KIMS-H500-M4
L
LPFCM14-A-C14
LPFCM14-A-D14
LPFCM22-A-C14
LPFCM34-A-C14
LPMM-S2-C
LPMM-S5-C
LPMS-S8-C
LWC19-A-C
LWC19-A-C14
LWC19-H25-C
LWC19-H25-C14
LPFCM22-A-D14
LPFCM34-A-D14
LPMM-S2-M
LPMM-S5-M
LPMS-S8-M
LWC19-A-M
LWC19-A-M14
LWC19-H25-M
LWC19-H25-M14
LWC25-A-C
LWC25-A-C14
LWC25-H25-C
LWC25-H25-C14
LWC38-A-C
LWC38-A-C14
LWC38-H25-C
LWC38-H25-C14
LWC50-A-L
LWC50-A-L14
LWC50-H25-L
LWC50-H25-L14
LWC75-A-L
LWC75-A-L14
LWC25-A-D
LWC25-A-D14
LWC25-H25-D
LWC25-H25-D14
LWC38-A-D
LWC38-A-D14
LWC38-H25-D
LWC38-H25-D14
LWC50-A-T
LWC50-A-T14
LWC50-H25-T
LWC50-H25-T14
LWC75-A-C
LWC75-A-C14
Most commonly used parts appear in BOLD.
137
Wiring Accessories Bulk Package Part Numbers
Bulk Package Part Numbers (continued)
The following is an alpha-numeric cross reference of Standard Package Wiring Accessories parts with the corresponding Bulk Package part numbers.
Standard Part No.
Bulk Part No.
LWC75-H25-L
LWC75-H25-L14
LWC75-H25-C
LWC75-H25-C14
LWC100-A-L
LWC100-A-C
LWC100-A-L14
LWC100-H25-L
LWC100-A-C14
LWC100-H25-C
LWC100-H25-L14
LWC100-H25-C14
M
Standard Part No.
Bulk Part No.
T
TA1S8-C
TA1S10-C
TA1S8-M
TA1S10-M
TA2-C
TA2-M
THASS8-C
THASS8-C30
THASS8-M
THASS-M30
THASS10-C
THASS10-M
THASS10F-M30
THASS25-M
Standard Part No.
TM2S8-C
TM2S8-C100
Bulk Part No.
TM2S8-M
TM2S8-M100
TM3A-C
TM3A-M
TM3R6-C
TM3S10-C
TM3R6-M
TM3S10-M
TM3S25-C
TM3S25-M
TM3S8-C
TM3S8-C100
TP2-C
TM3S8-M
TM3S8-M100
TP2-M
TP4H-C
TWR-C
TP4H-D
TWR-M
MBMS-S10-C
MMS8
MBMS-S10-M
STD. ONLY
THASS10F-C30
THASS25-C
MP150-C
MP150-M
THASS25-C30
THASS25-M30
THRU
MP350-C
MP150-C0
THRU
MP350-C0
BULK ONLY
THRU
MP350-M
MP150-M0
THRU
MP350-M0
MP150R
THRU
MP250R
MPMS19-M0
MPMH38-D0
MPMS25-M0
THASS8F-C
THASS8F-C30
THASS10F-C
THASS10F-C30
THASS25F-C
THASS25F-C30
THAUF4-X
THM1SC-C
THM1SC-C30
THMSC35-C30
THMSC35-C639
THASS8F-M
THASS8F-M30
THASS10F-M
THASS10F-M30
THASS25F-M
THASS25F-M30
THAUF4-C
THM1SC-M
THM1SC-M30
THMSC35-M30
THMSC35-M639
MPMWH32-D0
THMSC35-C630
THMSC35F-C630
THMSC35F-C39
THMSC35F-C639
THMSC35-M639
WS75-25-C
WS75-25-M
THMSC60-C30
THMSC60-C39.
THMSC60F-C30
THMSC60F-C39
THMSC85-C30
THMSC85-C39
THMSP25-C
THMSP25-C30
THMSP25F-C30
TMEH-S8-Q0
TMEH-S10-Q0
THMSC60-M30
THMSC60-M39
THMSC60F-M30
THMSC60F-M39
THMSC85-M30
THMSC85-M39
THMSP25-M
THMSP25-M30
THMSP25F-M30
TMEH-S8-C0
TMEH-S10-C0
WS75-50-C
WS75-50-M
WS75-75-C
WS75-75-M
TMEH-S25-Q0
TMEH-S25-C0
TMSH50-C300
TMSTHS10-C0
TMSTHS13-C0
TMSTHS16-C0
TMSTHS19-C0
TMSH50-T300
TMSTHS10-D0
TMSTHS13-D0
TMSTHS16-D0
TMSTHS16-D0
RAFCBI1-S6-M20
RAFCBI2-S6-M20
RAFCBI3-S6-M20
TMSTLHS5-C0
TMSTLHS5-M0
TMSTLHS6-C0
TMSTLHS8-C0
TM1A-C
TMSTLHS6-M0
TMSTLHS8-M0
TM1A-M
SICH25-C
SICH38-C
SICH25-M
SICH38-M
SICH50-C
SICH75-C
SICH50-M
SICH75-M
SMS-A-C
SMS-A-D
TM1S4-C
TM1S6-C
TM2A-C
TM2PWH25-C
TM2R6-C
TM2S6-C
TM1S4-M
TM1S6-M
TM2A-M
TM2PWH25-M
TM2R6-M
TM2S6-M
MPMS19-C0
MPMH38-L0
MPMS25-C0
MPMWH32-L0
P
PBMS-H25-C
PBMS-H25-C14
PC038-H25D-C0
PC050-H25D-C0
PC062-H25D-C0
PC075-H25D-C0
PC087-H25D-C0
PC100-H25D-C0
PC112-H25D-C0
PC125-H25D-C0
PLA2S-A-Q
PMCC38H25-C
PM2H25-C
PP1S-S10-X
PP2S-S10-X
PP2S-S12-X
PRA2S-A-Q
PWMS-H25-C
PBMS-H25-M
PBMS-H25-M14
PC038-H25D-D0
PC050-H25D-D0
PC062-H25D-D0
PC075-H25D-D0
PC087-H25D-D0
PC100-H25D-T0
PC112-H25D-T0
PC125-H25D-T0
PLA2S-A-C
PMCC38H25-M
PM2H25-M
PP1S-S10-C
PP2S-S10-C
PP2S-S12-C
PRA2S-A-C
PWMS-H25-M
R
RAFCBI1-S6-C20
RAFCBI2-S6-C20
RAFCBI3-S6-C20
S
138
Most commonly used parts appear in BOLD.
V
VCC25-A-C
VCC25-A-M
VCC50-A-C
VCS-25-L
VCS-25-L100
VWS106-C
VWS106-C20
VWS4218-C
VWS4238-C
VWS4274-C
VCC50-A-T
VCS-25-D
VCS-25-D100
VWS106-M
VWS106-M20
VWS4218-M
VWS4238-M
VWS4274-M
THMSC35-M630
VWS42105-C
VWS42105-M
THMSC35F-M630
THMSC35-M39
VWSDC-C
VWSDC-D
W
Abrasion Protection Products
Heat Shrink
PVC Non-Shrink Tubing
Spiral Wrap
Grommet Edging
Corrugated Loom Tubing
Braided Sleeving
Split Harness Wrap
Abrasion Protection for Wire, Cable, Hydraulic and Pneumatic Tubing
Most commonly used parts appear in BOLD.
139
PANDUIT ® Heat Shrink Tubing — Heat Shrink Tubing Quick Selection Guide
Quick reference for PANDUIT ® Heat Shrinking for specific location applications
X
CSA Certified
X‡✓
X✓
X
X
X
X✓
X
TT
X
Flexible
X**
X
X
Semi-Rigid
Thin Wall
Thick Wall
Cross-Linked Material
CHARACTERISTICS
ST
H
X
A
TT
X
K
TT
X‡
VW-1 Rated
Very Flexible
X
X
X
X
X
X
X
X
X
X
X
X
X‡
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
2.5:1
3:1
X
X*
3:1
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
Colors Available
High Shrink Ratio
Flame Retardant
X
Adhesive Lined (Dual Wall)
Meets Military Specification
Below Ground Application
High Temp Applications(>250ºF)
Highly Chemical Resistant
X
Low Coefficient of Friction
Custom Cut Lengths
Standard 6" pieces
*Black/Red
**Except red
‡Except clear
✓Except sizes over 1"
S
H
VA
TT
S
H P
TT
S
H
ST
H
S
H
TN
U.L. Listed
UL Recognized
T
V
TT
ST
H
S
H
ST
H
H
ST
TR
A
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
Standard 4' lengths
Small 25' Reels
Large Reels
X
X
X
X
X
X
X
IP Rating
Found on Page. . .
62
62
62
62
—
62
66
66
66
68
148
150
149
147
151
153
152
154
141- 145144 146
X
X
X
X
X
X
See page 160 for IP Technical information.
Thin Wall Heat Shrink Part Number System
HSTT
Type
HSTT = Thin Wall
HSTTV = Thin Wall VW-1
HSTTN = Thin Wall Neoprene
HSTTK = Thin Wall KYNAR
HSTTT = Thin Wall TFE TEFLON
HSTTP = Thin Wall PVC
HSTTVA = Flexible Adhesive Lined
HSTTRA = Semi-Rigid Adhesive Lined
HSTTA = Thin Wall Adhesive Lined
140
Most commonly used parts appear in BOLD.
12 -
Expanded Diameter
05 = 3/64" (1.2mm)
06 = 1/16" (1.6mm)
09 = 3/32" (2.4mm)
12 = 1/8" (3.2mm)
19 = 3/16" (4.8mm)
25 = 1/4" (6.4mm)
38 = 3/8" (9.5mm)
50 = 1/2" (12.7mm)
75 = 3/4" (19.0mm)
100 = 1" (25.4mm)
150 = 1-1/2" (38.1mm)
200 = 2" (50.5mm)
300 = 3" (76.2mm)
400 = 4" (101.6mm)
48
- Q
Tube Length
48" = (1.2m)
NONE = Reel
10
Color
NONE = Black
C = Clear
CQ = 125 Pcs.
2 = 2 Pcs.
2 = Red
T = 200 Pcs.
5 = 5 Pcs.
4 = Yellow
Q = 25 Pcs. TL = 250 Pcs.
LQ = 75 Pcs. Y= 6" Pcs.
5 = Green
6 = Blue
10 = White
45 = Yellow/
Green
Reels (If No Tube Length Specified)
Q = 25' (7.6m)
L = 50' (15.2m)
C = 100' (30.5m)
T = 200' (61.0m)
D = 500' (152.4m)
M = 1000' (304.8m)
Package Quantity
(If Tube Length Specified)
For standard packages containing 6" lengths, refer to individual pages for complete part number offering.
Note: The above information is to be used as a guide. For specific part number offerings review individual pages for verification.
▲KYNAR is a registered trademark of Atofiina Chemicals, Inc.
TEFLON is a registered trademark of E.I. DuPont de Nemours Co.
Flexible Polyolefin DRY-SHRINK ™ Heat Shrink Tubing
HSTT Heat Shrink in 4' (1.2m) Pieces
and Reels
• General purpose heat shrink tubing for dry locations
• Applications include insulating, protecting, harnessing
and identifying wires
(Except Clear)
(Except Clear)
Type
Materials
HSTT
Polyolefin Cross-Linked
600V
-67°F to 275°F
(-55°C to 135°C‡)
AMS-DTL-23053/5
Class 1 or Class 2
(Except Clear)
Flexible
Shrink Ratio: ▲
2:1
Flame Retardant
(Except Clear)
Variety of Colors
‡Maximum UL temperature range is 125°C
HSTT in Bulk Packages — Large Reels and 4' (1.2m) Pcs. (3/64" to 3/16" Expanded I.D.)
Part Number
(Black✓)
HSTT05-48-Q
HSTT05-48-TL
HSTT05-C
HSTT05-M
HSTT06-48-Q
HSTT06-48-TL
HSTT06-C
HSTT06-M
HSTT09-48-Q
HSTT09-48-TL
HSTT09-C
HSTT09-M
HSTT12-48-Q
HSTT12-48-TL
HSTT12-C
HSTT12-M
HSTT19-48-Q
HSTT19-48-TL
HSTT19-C
HSTT19-M
Nominal
Diameter
in.
3/64
Minimum
Expanded
I.D.
in. (mm)
.046 (1.2)
Maximum
Recovered
I.D.
in. (mm)
.023 (0.6)
Nominal
Recovered
Wall
Thickness
in. (mm)
.016 (0.4)
1/16
.063 (1.6)
.031 (0.8)
.017 (0.4)
3/32
.093 (2.4)
.046 (1.2)
.020 (0.5)
1/8
.125 (3.2)
.062 (1.6)
.020 (0.5)
3/16
.187 (4.8)
.093 (2.4)
.020 (0.5)
Length
Feet (m)
4 (1.2)
4 (1.2)
100 (30.5)
1000 (304.8)
4 (1.2)
4 (1.2)
100 (30.5)
1000 (304.8)
4 (1.2)
4 (1.2)
100 (30.5)
1000 (304.8)
4 (1.2)
4 (1.2)
100 (30.5)
1000 (304.8)
4 (1.2)
4 (1.2)
100 (30.5)
1000 (304.8)
Bulk
Pkg.
Qty.*
Bulk
Ctn.
Qty.
25 Pcs.
250 Pcs.
1 Reel
1 Reel
25 Pcs.
250 Pcs.
1 Reel
1 Reel
25 Pcs.
250 Pcs.
1 Reel
1 Reel
25 Pcs.
250 Pcs.
1 Reel
1 Reel
25 Pcs.
250 Pcs.
1 Reel
1 Reel
—
—
10 Reels
2 Reels
—
—
10 Reels
2 Reels
—
—
10 Reels
2 Reels
—
—
10 Reels
2 Reels
—
—
10 Reels
2 Reels
*Order in multiples of bulk pkg. qty.
Most commonly used parts appear in BOLD.
See page 160 for IP Technical Information.
✓For additional color information, contact PANDUIT ® Technical Assistance 866-405-6657.
▲Shrink ratios are approximations; please refer to above ordering information for the exact min. Expanded and max. recovered I.D.’s.
141
Flexible Polyolefin DRY-SHRINK ™ Heat Shrink Tubing
HSTT in Bulk Packages (cont.) — Large Reels and 4'(1.2m) Pcs. (1/4" to 3/4" Expanded I.D.)
Part Number
(Black✓)
HSTT25-48-Q
HSTT25-48-TL
HSTT25-C
HSTT25-D
HSTT38-48-Q
HSTT38-48-TL
HSTT38-C
HSTT38-T
HSTT50-48-Q
HSTT50-48-T
HSTT50-C
HSTT50-T
HSTT75-48-5
HSTT75-48-CQ
HSTT75-C
HSTT75-T
Nominal
Diameter
in.
Minimum
Expanded
I.D.
in. (mm)
Maximum
Recovered
I.D.
in. (mm)
Nominal
Recovered
Wall
Thickness
in. (mm)
1/4
.250 (6.4)
.125 (3.2)
.025 (0.6)
3/8
.375 (9.5)
.187 (4.8)
.025 (0.6)
1/2
.500 (12.7)
.250 (6.4)
.025 (0.6)
3/4
.750 (19.0)
.375 (9.5)
.030 (0.8)
(Except Clear)
Length
Feet (m)
Bulk
Pkg.
Qty.*
Bulk
Ctn.
Qty.
4 (1.2)
4 (1.2)
100 (30.5)
500 (152.4)
4 (1.2)
4 (1.2)
100 (30.5)
200 (61.0)
4 (1.2)
4 (1.2)
100 (30.5)
200 (61.0)
4 (1.2)
4 (1.2)
100 (30.5)
200 (61.0)
25 Pcs.
250 Pcs.
1 Reel
1 Reel
25 Pcs.
250 Pcs.
1 Reel
1 Reel
25 Pcs.
200 Pcs.
1 Reel
1 Reel
5 Pcs.
125 Pcs.
1 Reel
1 Reel
—
—
10 Reels
2 Reels
—
—
10 Reels
2 Reels
—
—
10 Reels
2 Reels
—
—
10 Reels
2 Reels
(Except Clear)
HSTT in Bulk Packages — Large Reels and 4' (1.2m) Pcs. (1" to 4" Expanded I.D.)
Part Number
(Black✓)
HSTT100-48-5
HSTT100-48-LQ
HSTT100-C
HSTT150-48-5
HSTT150-C
HSTT200-48-5
HSTT200-L
HSTT300-48-2
HSTT300-L
HSTT400-48-2
HSTT400-L
142
Nominal
Diameter
in.
Minimum
Expanded
I.D.
in. (mm)
Maximum
Recovered
I.D.
in. (mm)
Nominal
Recovered
Wall
Thickness
in. (mm)
1
1.00 (25.4)
.500 (12.7)
.035 (0.9)
1 1/2
1.50 (38.1)
.750 (19.0)
.040 (1.0)
2
2.00 (50.8)
1.00 (25.4)
.045 (1.1)
3
3.00 (76.2)
1.50 (38.1)
.050 (1.3)
4
4.00 (101.6)
2.00 (50.8)
.055 (1.4)
Most commonly used parts appear in BOLD.
Length
Feet (m)
Bulk
Pkg.
Qty.*
Bulk
Ctn.
Qty.
4 (1.2)
4 (1.2)
100 (30.5)
4 (1.2)
100 (30.5)
4 (1.2)
50 (15.2)
4 (1.2)
50 (15.2)
4 (1.2)
50 (15.2)
5 Pcs.
75 Pcs.
1 Reel
5 Pcs.
1 Reel
5 Pcs.
1 Reel
2 Pcs.
1 Reel
2 Pcs.
1 Reel
—
—
2 Reels
—
2 Reels
—
2 Reels
—
—
—
—
*Order in multiples of bulk pkg. qty.
✓For additional color information, contact PANDUIT ® Technical Assistance 866-405-6657.
▲Shrink ratios are approximations; please refer to above ordering information for the exact min. Expanded and max. Recovered I.D.’s.
Flexible Polyolefin DRY-SHRINK ™ Heat Shrink Tubing
HSTT Heat Shrink on 25' (7.6m) Reels
• General purpose heat shrink tubing for dry locations
• Featuring unique self dispensing Q-Box 25’ (7.5m)
HSTT in Standard Packages
Part Number
(Black✓)
Nominal
Diameter
in.
Minimum
Expanded
I.D.
in. (mm)
HSTT05-Q
HSTT06-Q
HSTT09-Q
HSTT12-Q
HSTT19-Q
HSTT25-Q
HSTT38-Q
HSTT50-Q
HSTT75-Q
3/64
1/16
3/32
1/8
3/16
1/4
3/8
1/2
3/4
.046 (1.2)
.063 (1.6)
.093 (2.4)
.125 (3.2)
.187 (4.8)
.250 (6.4)
.375 (9.5)
.500 (12.7)
.750 (19.0)
Maximum
Recovered
I.D.
in. (mm)
Nominal
Recovered
Wall
Thickness
in. (mm)
Length
Feet (m)
Std.
Pkg.
Qty.*
Std.
Ctn.
Qty.
0.23 (0.6)
.031 (0.8)
.046 (1.2)
.062 (1.6)
.093 (2.4)
.125 (3.2)
.187 (4.8)
.250 (6.4)
.375 (9.5)
.016 (0.4)
.017 (0.4)
.020 (0.5)
.020 (0.5)
.020 (0.5)
.025 (0.6)
.025 (0.6)
.025 (0.6)
.030 (0.8)
25 (7.6)
25 (7.6)
25 (7.6)
25 (7.6)
25 (7.6)
25 (7.6)
25 (7.6)
25 (7.6)
25 (7.6)
1 Reel
1 Reel
1 Reel
1 Reel
1 Reel
1 Reel
1 Reel
1 Reel
1 Reel
10 Reels
10 Reels
10 Reels
10 Reels
10 Reels
10 Reels
10 Reels
10 Reels
10 Reels
HSTT Heat Shrink
Standard Packs of Heat Shrink — 6" (152.4mm) Pieces
Small package holds unused tube and fits
easily in a tool box
• General purpose heat shrink tubing for
dry locations
• Applications include insulating, protecting,
harnessing and identifying wires
HSTT in Standard Packages
Part Number
(Black✓)
Nominal
Diameter
in.
Minimum
Expanded
I.D.
in. (mm)
HSTT06-Y
HSTT09-Y
HSTT12-Y
HSTT19-Y
HSTT25-Y
HSTT38-Y
HSTT50-Y
HSTT75-Y
HSTT100-Y
1/16
3/32
1/8
3/16
1/4
3/8
1/2
3/4
1
.063 (1.6)
.093 (2.4)
.125 (3.2)
.187 (4.8)
.250 (6.4)
.375 (9.5)
.500 (12.7)
.750 (19.0)
1.00 (25.4)
Maximum
Recovered
I.D.
in. (mm)
Nominal
Recovered
Wall
Thickness
in. (mm)
Length
in. (mm)
Std.
Pkg.
Qty.*
Std.
Ctn.
Qty.
.031 (0.8)
.046 (1.2)
.062 (1.6)
.093 (2.4)
.125 (3.2)
.187 (4.8)
.250 (6.4)
.375 (9.5)
.500 (12.7)
.017 (0.4)
.020 (0.5)
.020 (0.5)
.020 (0.5)
.025 (0.6)
.025 (0.6)
.025 (0.6)
.030 (0.8)
.035 (0.9)
6 (152.4)
6 (152.4)
6 (152.4)
6 (152.4)
6 (152.4)
6 (152.4)
6 (152.4)
6 (152.4)
6 (152.4)
26 pcs.
24 pcs.
20 pcs.
18 pcs.
14 pcs.
12 pcs.
10 pcs.
8 pcs.
6 pcs.
10 Pkgs.
10 Pkgs.
10 Pkgs.
10 Pkgs.
10 Pkgs.
10 Pkgs.
10 Pkgs.
10 Pkgs.
10 Pkgs.
*Order in multiples of std. pkg. qty.
✓For additional color information, contact PANDUIT ® Technical Assistance 866-405-6657.
▲Shrink ratios are approximations; please refer to above ordering information for the exact min. expanded and
max. recovered I.D.’s.
Most commonly used parts appear in BOLD.
143
Flexible Polyolefin DRY-SHRINK ™ Heat Shrink Tubing
Standard Packs of Heat Shrink —
6" (152.4mm) Pieces
Small package holds unused tube and fits easily in a tool box
• Assorted colors and diameters available
HSTT — Combination: Black and Colors — Single Diameter
Part Number
HSTT06-YK1
HSTT09-YK1
HSTT12-YK1
HSTT19-YK1
HSTT25-YK1
HSTT38-YK1
HSTT50-YK1
HSTT75-YK1
HSTT100-YK1
Nominal
Diameter
in.
1/16
3/32
1/8
3/16
1/4
3/8
1/2
3/4
1
Minimum
Expanded
I.D.
in. (mm)
.063 (1.6)
.093 (2.4)
.125 (3.2)
.187 (4.8)
.250 (6.4)
.375 (9.5)
.500 (12.7)
.750 (19.0)
1.00 (25.4)
Maximum
Recovered
I.D.
in. (mm)
.031 (0.8)
.046 (1.2)
.062 (1.6)
.093 (2.4)
.125 (3.2)
.187 (4.8)
.250 (6.4)
.375 (9.5)
.500 (12.7)
Black
No. Pcs.
8
6
2
6
2
6
4
2
1
Each
Color No.
Pcs.
3
3
3
2
2
1
1
1
1
Std.
Pkg.
Qty.*
26 pcs.
24 pcs.
20 pcs.
18 pcs.
14 pcs.
12 pcs.
10 pcs.
8 pcs.
7 pcs.
Std.
Ctn.
Qty.
10 Pkgs.
10 Pkgs.
10 Pkgs.
10 Pkgs.
10 Pkgs.
10 Pkgs.
10 Pkgs.
10 Pkgs.
10 Pkgs.
NOTE: Colors include clear, red, yellow, green, blue and white. For additional color information, contact PANDUIT ® Technical Assistance 866-405-6657.
HSTT — Black Only — Multiple Diameters
Part Number
HSTT-YK1
HSTT-YK2
Black Number
Std.
Std.
Nominal
of Pieces by
Pkg.
Ctn.
Diameter
Diameter
Qty.*
Qty.
Various;
(2) pcs. each
14 pcs. 10 Pkgs.
Smaller 1/8", 1/16", 3/16",
Range
3/32", 1/4",
1/2", 3/8"
Various;
(2) pcs. each
8 pcs. 10 Pkgs.
Larger
3/8", 1/2",
Range
3/4", 1"
HSTT — Yellow/Green Stripe — Multiple Diameters
Part Number
HSTT-YK1-45
HSTT-YK2-45
144
Nominal
Diameter
Various;
Smaller
Range
Various;
Larger
Range
Number
of Pieces by
Diameter
(2) pcs. each
1/8", 3/16",
1/4", 3/8"
(2) pcs. each
3/8",
1/2", 3/4"
Most commonly used parts appear in BOLD.
Std.
Std.
Pkg.
Ctn.
Qty.*
Qty.
8 pcs. 10 Pkgs.
6 pcs. 10 Pkgs.
*Order in multiples of std. pkg. qty.
Flexible Polyolefin VW-1 DRY-SHRINK ™ Heat Shrink Tubing
HSTTV Heat Shrink in Small Reels and 4' (1.2m) Pieces
•
•
•
•
For dry locations
Highly flame retardant
Meets UL VW-1 rating
Fast Shrink Time
Type
Materials
HSTTV
Polyolefin Cross-Linked
600V
-67°F to 257°F
(-55°C to 125°C ‡)
AMS-DTL-23053/5
Class 3
Flexible
Shrink Ratio:▲
2:1
Highly Flame
Retardant VW-1
VW-1
OFT
‡Maximum UL temperature range is 125° C.
HSTTV in Bulk Packages — Small Reels & 4' (1.2m) Pcs.
Part Number
(Black✓)
HSTTV05-48-Q
HSTTV05-48-TL
HSTTV05-C
HSTTV06-48-Q
HSTTV06-48-TL
HSTTV06-C
HSTTV09-48-Q
HSTTV09-48-TL
HSTTV09-C
HSTTV12-48-Q
HSTTV12-48-TL
HSTTV12-C
HSTTV19-48-Q
HSTTV19-48-TL
HSTTV19-C
HSTTV25-48-Q
HSTTV25-48-TL
HSTTV25-C
HSTTV38-48-Q
HSTTV38-48-TL
HSTTV38-C
HSTTV50-48-Q
HSTTV50-48-T
HSTTV50-C
HSTTV75-48-5
HSTTV75-48-CQ
HSTTV75-C
HSTTV100-48-5
HSTTV100-48-LQ
HSTTV100-C
HSTTV150-48-5
HSTTV150-C
Nominal
Diameter
in.
Maximum
Minimum
Recovered
Expanded I.D.
I.D.
in. (mm)
in. (mm)
Nominal
Recovered
Wall
Thickness
in. (mm)
3/64
.046 (1.2)
.023 (0.6)
.016 (0.4)
1/16
.063 (1.6)
.031 (0.8)
.017 (0.4)
3/32
.093 (2.4)
.046 (1.2)
1/8
.125 (3.2)
.062 (1.6)
3/16
.187 (4.8)
.093 (2.4)
1/4
.250 (6.4)
.125 (3.2)
.025 (0.6)
3/8
.375 (9.5)
.187 (4.8)
.025 (0.6)
1/2
.500 (12.7)
.250 (6.4)
.025 (0.6)
3/4
.750 (19.0)
.375 (9.5)
.030 (0.8)
1
1.00 (25.4)
.500 (12.7)
.035 (0.9)
1 1/2
1.50 (38.1)
.750 (19.0)
.040 (1.0)
.020 (0.5)
*Order in multiples of bulk pkg. qty.
✓For additional color information, contact PANDUIT ® Technical Assistance 866-405-6657.
▲ Shrink ratios are approximations; please refer to above ordering information for the exact min. expanded and max.
recovered I.D.’s.
Length
Feet (m)
4 (1.2)
4 (1.2)
100 (30.5)
4 (1.2)
4 (1.2)
100 (30.5)
4 (1.2)
4 (1.2)
100 (30.5)
4 (1.2)
4 (1.2)
100 (30.5)
4 (1.2)
4 (1.2)
100 (30.5)
4 (1.2)
4 (1.2)
100 (30.5)
4 (1.2)
4 (1.2)
100 (30.5)
4 (1.2)
4 (1.2)
100 (30.5)
4 (1.2)
4 (1.2)
100 (30.5)
4 (1.2)
4 (1.2)
100 (30.5)
4 (1.2)
100 (30.5)
Bulk
Pkg.
Qty.*
25 Pcs.
250 Pcs.
1 Reel
25 Pcs.
250 Pcs.
1 Reel
25 Pcs.
250 Pcs.
1 Reel
25 Pcs.
250 Pcs.
1 Reel
25 Pcs.
250 Pcs.
1 Reel
25 Pcs.
250 Pcs.
1 Reel
25 Pcs.
250 Pcs.
1 Reel
25 Pcs.
200 Pcs.
1 Reel
5 Pcs.
125 Pcs.
1 Reel
5 Pcs.
75 Pcs.
1 Reel
5 Pcs.
1 Reel
Bulk
Ctn.
Qty.
—
—
10 Reels
—
—
10 Reels
—
—
10 Reels
—
—
10 Reels
—
—
10 Reels
—
—
10 Reels
—
—
10 Reels
—
—
10 Reels
—
—
10 Reels
—
—
2 Reels
—
2 Reels
Most commonly used parts appear in BOLD.
145
Flexible Polyolefin VW-1 DRY-SHRINK ™ Heat Shrink Tubing
HSTTV Heat Shrink in 1000' (304.8m), 500' (152.4m) and 200' (61.0m) Reels
HSTTV in Bulk Packages — Large Reels
Nominal
Diameter
in.
Length
Feet (m)
Part Number
Black
Red
Yellow
3/64
1/16
3/32
1/8
3/16
1/4
3/8
1/2
3/4
1000 (304.8)
1000 (304.8)
1000 (304.8)
1000 (304.8)
1000 (304.8)
500 (152.4)
200 (61.0)
200 (61.0)
200 (61.0)
HSTTV05-M
HSTTV06-M
HSTTV09-M
HSTTV12-M
HSTTV19-M
HSTTV25-D
HSTTV38-T
HSTTV50-T
HSTTV75-T
HSTTV05-M2
HSTTV06-M2
HSTTV09-M2
HSTTV12-M2
HSTTV19-M2
HSTTV25-D2
HSTTV38-T2
HSTTV50-T2
HSTTV75-T2
HSTTV05-M4
HSTTV06-M4
HSTTV09-M4
HSTTV12-M4
HSTTV19-M4
HSTTV25-D4
HSTTV38-T4
HSTTV50-T4
HSTTV75-T4
Blue
Bulk
Pkg.
Qty.*
Bulk
Ctn.
Qty.
HSTTV05-M6
HSTTV06-M6
HSTTV09-M6
HSTTV12-M6
HSTTV19-M6
HSTTV25-D6
HSTTV38-T6
HSTTV50-T6
HSTTV75-T6
1 Reel
1 Reel
1 Reel
1 Reel
1 Reel
1 Reel
1 Reel
1 Reel
1 Reel
2 Reels
2 Reels
2 Reels
2 Reels
2 Reels
2 Reels
2 Reels
2 Reels
2 Reels
* Order in multiples of bulk pkg. qty.
HSTTV Heat Shrink in
25' (7.5m) Reels
HSTTV in Standard Packages of 25' (7.5m) Reels — Black Only
Part Number
HSTTV05-Q
HSTTV06-Q
HSTTV09-Q
HSTTV12-Q
HSTTV19-Q
HSTTV25-Q
HSTTV38-Q
HSTTV50-Q
HSTTV75-Q
HSTTV100-Q
Nominal
Nominal
Minimum
Maximum
Recovered Wall
Diameter Expanded I.D. Recovered I.D.
Thickness
in.
in. (mm)
in. (mm)
in. (mm)
3/64
.046 (1.2)
.023 (0.6)
.020 (0.5)
1/16
.063 (1.6)
.031 (0.8)
.020 (0.5)
3/32
.093 (2.4)
.046 (1.2)
.020 (0.5)
1/8
.125 (3.2)
.062 (1.6)
.020 (0.5)
3/16
.187 (4.8)
.093 (2.4)
.020 (0.5)
1/4
.250 (6.4)
.125 (3.2)
.025 (0.6)
3/8
.375 (9.5)
.187 (4.8)
.025 (0.6)
1/2
.500 (12.7)
.250 (6.4)
.025 (0.6)
3/4
.750 (19.0)
.375 (9.5)
.030 (0.8)
1
1.00 (25.4)
.500 (12.7)
.035 (0.9)
Length
Feet (m)
25 (7.5)
25 (7.5)
25 (7.5)
25 (7.5)
25 (7.5)
25 (7.5)
25 (7.5)
25 (7.5)
25 (7.5)
25 (7.5)
* Order in multiples of std. pkg. qty.
Standard Packs of Heat Shrink — 6" (152.4mm) Pieces
HSTTV — Single Diameter — Black Only
Part Number
HSTTV05-Y
HSTTV06-Y
HSTTV09-Y
HSTTV12-Y
HSTTV19-Y
HSTTV25-Y
HSTTV38-Y
HSTTV50-Y
HSTTV75-Y
HSTTV100-Y
Nominal
Diameter
in.
3/64
1/16
3/32
1/8
3/16
1/4
3/8
1/2
3/4
1
Minimum
Expanded
I.D.
in. (mm)
.046 (1.2)
.063 (1.6)
.093 (2.4)
.125 (3.2)
.187 (4.8)
.250 (6.4)
.375 (9.5)
.500 (12.7)
.750 (19.0)
1.00 (25.4)
* Order in multiples of std. pkg. qty.
146
Most commonly used parts appear in BOLD.
Maximum
Recovered
I.D.
in. (mm)
.023 (0.6)
.031 (0.8)
.046 (1.2)
.062 (1.6)
.093 (2.4)
.125 (3.2)
.187 (4.8)
.250 (6.4)
.375 (9.5)
.500 (12.7)
Std.
Pkg.
Qty.*
26 pcs.
26 pcs.
24 pcs.
20 pcs.
18 pcs.
14 pcs.
12 pcs.
10 pcs.
8 pcs.
6 pcs.
Std.
Ctn.
Qty.
10 Pkgs.
10 Pkgs.
10 Pkgs.
10 Pkgs.
10 Pkgs.
10 Pkgs.
10 Pkgs.
10 Pkgs.
10 Pkgs.
10 Pkgs.
Std.
Pkg.
Qty.*
1 Reel
1 Reel
1 Reel
1 Reel
1 Reel
1 Reel
1 Reel
1 Reel
1 Reel
1 Reel
Std.
Ctn.
Qty.
10 Reels
10 Reels
10 Reels
10 Reels
10 Reels
10 Reels
10 Reels
10 Reels
10 Reels
2 Reels
PVC DRY-SHRINK ™ Heat Shrink Tubing
HSTTP Heat Shrink
•
•
•
•
•
For dry locations
Flexible, highly flame retardant tubing
Good resistance to most fuels and oils
Good cut through and solder resistance
Material is UV Resistant
Type
Materials
Polyvinyl Chloride
Cross-Linked
HSTTP
600V
-4°F to 221°F
(-20°C to 105°C)
Flexible
Shrink Ratio:▲
2:1
Highly Flame
Retardant VW-1
HSTTP in Standard Packages — Reels — Black Only
Part Number
HSTTP05-Q
HSTTP05-C
HSTTP05-M
HSTTP06-Q
HSTTP06-C
HSTTP06-M
HSTTP09-Q
HSTTP09-C
HSTTP09-M
HSTTP12-Q
HSTTP12-C
HSTTP12-M
HSTTP19-Q
HSTTP19-C
HSTTP19-M
HSTTP25-Q
HSTTP25-C
HSTTP25-D
HSTTP38-Q
HSTTP38-C
HSTTP38-T
HSTTP50-Q
HSTTP50-C
HSTTP75-Q
HSTTP75-C
HSTTP100-Q
HSTTP100-C
HSTTP150-Q
HSTTP150-C
HSTTP200-Q
Nominal
Minimum
Maximum
Diameter Expanded I.D. Recovered I.D.
in.
in. (mm)
in. (mm)
Nominal
Recovered Wall
Thickness
in. (mm)
3/64
.046 (1.2)
.023 (0.6)
.020 (0.5)
1/16
.063 (1.6)
.031 (0.8)
.020 (0.5)
3/32
.093 (2.4)
.046 (1.2)
.025 (0.6)
1/8
.125 (3.2)
.062 (1.6)
.025 (0.6)
3/16
.187 (4.8)
.093 (2.4)
.025 (0.6)
1/4
.250 (6.4)
.125 (3.2)
.025 (0.6)
3/8
.375 (9.5)
.187 (4.8)
.030 (0.8)
1/2
.500 (12.7)
.250 (6.4)
.030 (0.8)
3/4
.750 (19.0)
.375 (9.5)
.035 (0.9)
1
1.00 (25.4)
.500 (12.7)
.040 (1.0)
1 1/2
1.50 (38.1)
.750 (19.0)
.045 (1.1)
2
2.00 (50.8)
1.00 (25.4)
.050 (1.3)
*Order in multiples of std. pkg. qty.
▲Shrink ratios are approximations; please refer to above ordering information for the exact min. expanded
and max. recovered I.D.’s.
Length
Feet (m)
Std.
Pkg.
Qty.*
Std.
Ctn.
Qty.
25 (7.5)
100 (30.5)
1000 (304.8)
25 (7.5)
100 (30.5)
1000 (304.8)
25 (7.5)
100 (30.5)
1000 (304.8)
25 (7.5)
100 (30.5)
1000 (304.8)
25 (7.5)
100 (30.5)
1000 (304.8)
25 (7.5)
100 (30.5)
500 (152.4)
25 (7.5)
100 (30.5)
200 (61.0)
25 (7.5)
100 (30.5)
25 (7.5)
100 (30.5))
25 (7.5)
100 (30.5)
25 (7.5)
100 (30.5)
25 (7.5)
1 Reel
1 Reel
1 Reel
1 Reel
1 Reel
1 Reel
1 Reel
1 Reel
1 Reel
1 Reel
1 Reel
1 Reel
1 Reel
1 Reel
1 Reel
1 Reel
1 Reel
1 Reel
1 Reel
1 Reel
1 Reel
1 Reel
1 Reel
1 Reel
1 Reel
1 Reel
1 Reel
1 Reel
1 Reel
1 Reel
10 Reels
2 Reels
2 Reels
10 Reels
2 Reels
2 Reels
10 Reels
2 Reels
2 Reels
10 Reels
2 Reels
2 Reels
10 Reels
2 Reels
2 Reels
10 Reels
2 Reels
2 Reels
10 Reels
2 Reels
2 Reels
10 Reels
2 Reels
10 Reels
2 Reels
2 Reels
2 Reels
2 Reels
2 Reels
2 Reels
Most commonly used parts appear in BOLD.
147
Neoprene DRY-SHRINK ™ Heat Shrink Tubing
HSTTN Heat Shrink
• For dry locations
• Highly flexible tubing
• Offers excellent chemical resistance, especially
to fuels and oils
• Highly flame retardant
Type
Materials
Elastomer Neoprene
Cross-Linked
HSTTN
600V
Highly Flexible
-94°F to 250°F
(-70°C to 121°C)
AMS-DTL-23053/1
Class 2
Shrink Ratio:▲
2:1
Highly Flame
Retardant
HSTTN in Standard Packages — 25' (7.5m) and 100' (30.5m) Reels — Black Only
Part Number
Nominal
Diameter
in.
Minimum
Expanded I.D.
in. (mm)
Maximum
Recovered I.D.
in. (mm)
Nominal
Recovered
Wall
Thickness
in. (mm)
HSTTN25-C
HSTTN38-C
HSTTN50-C
HSTTN63-C
HSTTN75-C
HSTTN88-C
HSTTN100-C
HSTTN125-C
HSTTN150-C
HSTTN175-C
HSTTN200-Q
HSTTN300-Q
1/4
3/8
1/2
5/8
3/4
7/8
1
1 1/4
1 1/2
1 3/4
2
3
.250 (6.4)
.375 (9.5)
.500 (12.7)
.625 (15.9)
.750 (19.0)
.875 (22.2)
1.00 (25.4)
1.25 (31.8)
1.50 (38.1)
1.75 (44.5)
2.00 (50.8)
3.00 (76.2)
.143 (3.6)
.211 (5.4)
.286 (7.3)
.357 (9.1)
.428 (10.9)
.500 (12.7)
.570 (14.5)
.714 (18.1)
.857 (21.8)
1.00 (25.4)
1.140 (29.0)
1.710 (43.4)
.035 (0.9)
.040 (1.0)
.048 (1.2)
.052 (1.3)
.057 (1.5)
.065 (1.7)
.070 (1.8)
.087 (2.2)
.095 (2.4)
.107 (2.7)
.110 (2.8)
.125 (3.8)
148
Most commonly used parts appear in BOLD.
Length
Feet (m)
Std.
Pkg.
Qty.*
Std.
Ctn.
Qty.
100 (30.5)
100 (30.5)
100 (30.5)
100 (30.5)
100 (30.5)
100 (30.5)
100 (30.5)
100 (30.5)
100 (30.5)
100 (30.5)
25 (7.5)
25 (7.5)
1 Reel
1 Reel
1 Reel
1 Reel
1 Reel
1 Reel
1 Reel
1 Reel
1 Reel
1 Reel
1 Reel
1 Reel
2 Reels
2 Reels
2 Reels
2 Reels
2 Reels
2 Reels
2 Reels
2 Reels
2 Reels
2 Reels
2 Reels
2 Reels
*Order in multiples of std. pkg. qty.
▲Shrink ratios are approximations; please refer to above ordering information for the exact min. expanded and max. recovered I.D.’s.
TFE TEFLON‡ DRY-SHRINK ™ Heat Shrink Tubing
HSTTT (TFE)
Heat Shrink
Type
Materials
HSTTT
• For dry locations
• Semi-rigid, highly heat resistant
• Offers the widest temperature
range of any plastic material
• Color is milky clear
Polytetrafluoroethylene
600V
-88°F to 482°F
(-67°C to 250°C)
AMS-DTL-23053/
12, Class 3
Semi-Rigid
Shrink Ratio:▲
2:1
Non-Flammable
NOTE: Special instructions on page 158.
2:1 Shrink Ratio (Class 3) — HSTTT in Standard Packages — 4' (1.2m) Pcs.
Part Number
Nominal
Diameter
Minimum
Expanded I.D.
in. (mm)
Maximum
Recovered I.D.
in. (mm)
Nominal Recovered
Wall Thickness
in. (mm)
Length
Feet (m)
Std.
Pkg.
Qty.*
HSTTT03-48-Q
HSTTT04-48-Q
HSTTT046-48-Q
HSTTT05-48-Q
HSTTT055-48-Q
HSTTT06-48-Q
HSTTT08-48-Q
HSTTT09-48-Q
HSTTT12-48-Q
HSTTT15-48-Q
HSTTT19-48-Q
HSTTT24-48-Q
HSTTT30-48-Q
HSTTT37-48-Q
HSTTT43-48-Q
HSTTT47-48-Q
HSTTT56-48-5
HSTTT66-48-5
HSTTT75-48-5
HSTTT93-48-5
HSTTT112-48-5
HSTTT131-48-2
HSTTT150-48-2
30 AWG
28 AWG
26 AWG
24 AWG
22 AWG
20 AWG
18 AWG
16 AWG
14 AWG
12 AWG
10 AWG
8 AWG
6 AWG
4 AWG
2 AWG
0 AWG
9/16
5/8
3/4
15/16
1 1/8
1 5/16
1 1/2
.034 (0.9)
.038 (1.0)
.046 (1.2)
.050 (1.3)
.055 (1.4)
.060 (1.5)
.076 (1.9)
.093 (2.3)
.120 (3.0)
.150 (3.8)
.191 (4.9)
.240 (6.0)
.302 (7.7)
.370 (9.4)
.430 (10.9)
.470 (11.9)
.560 (14.2)
.655 (16.6)
.750 (19.0)
.930 (23.6)
1.125 (28.6)
1.310 (33.3)
1.500 (38.1)
.015 (0.4)
.018 (0.5)
.022 (0.5)
.027 (0.7)
.032 (0.8)
.039 (1.0)
.049 (1.2)
.061 (1.6)
.072 (1.8)
.089 (2.3)
.112 (2.8)
.141 (3.6)
.178 (4.5)
.224 (5.7)
.278 (7.0)
.347 (8.8)
.399 (10.1)
.462 (11.7)
.524 (13.3)
.655 (16.6)
.786 (20.0)
.911 (23.1)
1.036 (26.3)
.009 (0.2)
.009 (0.2)
.010 (0.3)
.010 (0.3)
.012 (0.3)
.012 (0.3)
.012 (0.3)
.012 (0.3)
.012 (0.3)
.012 (0.3)
.012 (0.3)
.015 (0.4)
.015 (0.4)
.015 (0.4)
.015 (0.4)
.015 (0.4)
.015 (0.4)
.018 (0.5)
.018 (0.5)
.020 (0.5)
.025 (0.6)
.030 (0.8)
.030 (0.8)
4 (1.2)
4 (1.2)
4 (1.2)
4 (1.2)
4 (1.2)
4 (1.2)
4 (1.2)
4 (1.2)
4 (1.2)
4 (1.2)
4 (1.2)
4 (1.2)
4 (1.2)
4 (1.2)
4 (1.2)
4 (1.2)
4 (1.2)
4 (1.2)
4 (1.2)
4 (1.2)
4 (1.2)
4 (1.2)
4 (1.2)
25 Pcs.
25 Pcs.
25 Pcs.
25 Pcs.
25 Pcs.
25 Pcs.
25 Pcs.
25 Pcs.
25 Pcs.
25 Pcs.
25 Pcs.
25 Pcs.
25 Pcs.
25 Pcs.
25 Pcs.
25 Pcs.
5 Pcs.
5 Pcs.
5 Pcs.
5 Pcs.
5 Pcs.
2 Pcs.
2 Pcs.
*Order in multiples of std. pkg. qty.
▲Shrink ratios are approximations; please refer to above ordering information for the exact min. expanded
and max. recovered I.D.’s.
‡TEFLON is a registered trademark of E.I. Dupont de Nemours Co.
Most commonly used parts appear in BOLD.
149
KYNAR■ DRY-SHRINK ™ Heat Shrink Tubing
HSTTK KYNAR ■ Heat Shrink
•
•
•
•
•
For dry locations
Semi-rigid, highly heat resistant
Offers excellent chemical and abrasion resistance
Use in high temperature or solvent rich environment
Color is milky clear
Type
Material
Polyvinylidene Fluoride
HSTTK
600V
-67°F to 347°F
(-55°C to 175°C)
Semi-Rigid
Shrink Ratio:▲
2:1
AMS-DTL-23053/8
VW-1
Highly Flame
Retardant VW-1
HSTTK in Standard Packages — 4' (1.2m) Pieces
Part Number
HSTTK05-48-Q
HSTTK06-48-Q
HSTTK09-48-Q
HSTTK12-48-Q
HSTTK19-48-Q
HSTTK25-48-Q
HSTTK38-48-Q
HSTTK50-48-5
HSTTK75-48-5
HSTTK100-48-5
150
Nominal
Diameter
in.
Minimum
Expanded I.D.
in. (mm)
Maximum
Recovered I.D.
in. (mm)
Nominal
Recovered
Wall Thickness
in. (mm)
Length
Feet (m)
Std.
Pkg.
Qty.*
3/64
1/16
3/32
1/8
3/16
1/4
3/8
1/2
3/4
1
.046 (1.2)
.063 (1.6)
.093 (2.4)
.125 (3.2)
.187 (4.8)
.250 (6.4)
.375 (9.5)
.500 (12.7)
.750 (19.0)
1.00 (25.4)
.023 (0.6)
.031 (0.8)
.046 (1.2)
.062(1.6)
.093 (2.4)
.125(3.2)
.187 (4.8)
.250 (6.4)
.375 (9.5)
.500 (12.7)
.010 (0.3)
.010 (0.3)
.010 (0.3)
.010 (0.3)
.010 (0.3)
.010 (0.3)
.012 (0.3)
.012 (0.3)
.017 (0.4)
.019 (0.5)
4 (1.2)
4 (1.2)
4 (1.2)
4 (1.2)
4 (1.2)
4 (1.2)
4 (1.2)
4 (1.2)
4 (1.2)
4 (1.2)
25 Pcs.
25 Pcs.
25 Pcs.
25 Pcs.
25 Pcs.
25 Pcs.
25 Pcs.
5 Pcs.
5 Pcs.
5 Pcs.
Most commonly used parts appear in BOLD.
*Order in multiples of std. pkg. qty.
▲Shrink ratios are approximations; please refer to above ordering information for the exact min. expanded and max. recovered I.D.’s.
■KYNAR is a registered trademark of Atofina Chemicals, Inc.
Dual Wall Polyolefin DAMP-SHRINK ™ Heat Shrink Tubing
HSTTVA Heat Shrink
• For damp locations
• Flexible tubing with an adhesive inner wall which seals
and protects components from moisture and corrosion
Type
Materials
Polyolefin Cross-Linked
with Adhesive
HSTTVA
600V
-67°F to 230°F
(-55°C to 110°C)
AMS-DTL-23053/4
Class 2
Flexible
Shrink Ratio:▲
2:1
Outer Wall
Flame Retardant
HSTTVA in Standard Packages — 4' (1.2m) Pieces — Black Only
Nominal
Diameter
in.
Part Number
HSTTVA12-48-Q
HSTTVA19-48-Q
HSTTVA25-48-Q
HSTTVA38-48-Q
HSTTVA50-48-5
HSTTVA75-48-5
HSTTVA100-48-5
HSTTVA150-48-5
1/8
3/16
1/4
3/8
1/2
3/4
1
1 1/2
Minimum
Maximum
Expanded I.D. Recovered I.D.
in. (mm)
in. (mm)
.125 (3.2)
.187 (4.8)
.250 (6.4)
.375 (9.5)
.500 (12.7)
.750 (19.0)
1.00 (25.4)
1.50 (38.1)
.062 (1.6)
.093 (2.4)
.125 (3.2)
.187 (4.8)
.250 (6.4)
.375 (9.5)
.500 (12.7)
.750 (19.0)
Nominal
Recovered Wall
Thickness
in. (mm)
Length
Feet (m)
Std.
Pkg.
Qty.*
.020 (0.5)
.022 (0.6)
.030 (0.8)
.031 (0.8)
.032 (0.8)
.037 (0.9)
.046 (1.2)
.049 (1.2)
4 (1.2)
4 (1.2)
4 (1.2)
4 (1.2)
4 (1.2)
4 (1.2)
4 (1.2)
4 (1.2)
25 Pcs.
25 Pcs.
25 Pcs.
25 Pcs.
5 Pcs.
5 Pcs.
5 Pcs.
5 Pcs.
Standard Packs of HSTTVA Heat Shrink — 6" (152.4mm) Pieces
HSTTVA — Black Only — Single Diameter
Part Number
HSTTVA12-Y
HSTTVA19-Y
HSTTVA25-Y
HSTTVA38-Y
HSTTVA50-Y
HSTTVA75-Y
HSTTVA100-Y
Nominal
Minimum
Maximum
Diameter Expanded I.D. Recovered I.D.
in.
in. (mm)
in. (mm)
1/8
3/16
1/4
3/8
1/2
3/4
1
.125 (3.2)
.187 (4.8)
.250 (6.4)
.375 (9.5)
.500 (12.7)
.750 (19.0)
1.00 (25.4)
.062 (1.6)
.093 (2.4)
.125 (3.2)
.187 (4.8)
.250 (6.4)
.375 (9.5)
.500 (12.7)
Std.
Pkg.
Qty.*
Std.
Ctn.
Qty.
7 pcs.
7 pcs.
5 pcs.
4 pcs.
4 pcs.
3 pcs.
2 pcs.
10 Pkgs.
10 Pkgs.
10 Pkgs.
10 Pkgs.
10 Pkgs.
10 Pkgs.
10 Pkgs.
*Order in multiples of std. pkg. qty.
▲ Shrink ratios are approximations; please refer to above ordering information for the exact min. expanded
and max. recovered I.D.’s.
Most commonly used parts appear in BOLD.
151
Dual Wall Polyolefin DAMP-SHRINK ™ Heat Shrink Tubing
HSTTA Heat Shrink
• For damp locations
• Flexible tubing with adhesive inner wall, seals and protects
components from moisture and corrosion
• The 3:1 shrink ratio is a benefit when working with connector to
cable transitions
Type
Materials
Polyolefin CrossLinked with Adhesive
HSTTA
600V
-67°F to 230°F
(-55°C to 110°C)
AMS-DTL-23053/4
Class 3
Flexible
Shrink Ratio:▲
3:1
Outer Wall
Flame Retardant
HSTTA in Standard and Bulk Packages — 4' (1.2m) Pieces — Black Only
Part Number
HSTTA19-48-Q
HSTTA25-48-Q
HSTTA25-48-TL
HSTTA38-48-Q
HSTTA38-48-TL
HSTTA50-48-5
HSTTA50-48-T
HSTTA75-48-5
HSTTA75-48-C
HSTTA100-48-5
HSTTA100-48-L
HSTTA150-48-5
HSTTA150-48-Q
Nominal
Diameter
in.
3/16
1/4
1/4
3/8
3/8
1/2
1/2
3/4
3/4
1
1
1 1/2
1 1/2
Minimum
Expanded I.D.
in. (mm)
.187 (4.8)
.250 (6.4)
.250 (6.4)
.375 (9.5)
.375 (9.5)
.500 (12.7)
.500 (12.7)
.750 (19.0)
.750 (19.0)
1.00 (25.4)
1.00 (25.4)
1.50 (38.1)
1.50 (38.1)
Maximum
Recovered I.D.
in. (mm)
.062 (1.6)
.080 (2.0)
.080 (2.0)
.120 (3.0)
.120 (3.0)
.160 (4.1)
.160 (4.1)
.250 (6.4)
.250 (6.4)
.320 (8.1)
.320 (8.1)
.510 (12.9)
.510 (12.9)
Nominal Recovered
Wall Thickness
in. (mm)
.040 (1.0)
.040 (1.0)
.040 (1.0)
.055 (1.4)
.055 (1.4)
.070 (1.8)
.070 (1.8)
.085 (2.2)
.085 (2.2)
.100 (2.5)
.100 (2.5)
.100 (2.5)
.100 (2.5)
Length
Feet (m)
4 (1.2)
4 (1.2)
4 (1.2)
4 (1.2)
4 (1.2)
4 (1.2)
4 (1.2)
4 (1.2)
4 (1.2)
4 (1.2)
4 (1.2)
4 (1.2)
4 (1.2)
Std.
Pkg.
Qty.*
25 Pcs.
25 Pcs.
250 Pcs.
25 Pcs.
250 Pcs.
5 Pcs.
200 Pcs.
5 Pcs.
100 Pcs.
5 Pcs.
50 Pcs.
5 Pcs.
25 Pcs.
Standard Packs of HSTTA Heat Shrink — 6" (152.4mm) Pieces
HSTTA — Black Only — Single Diameter
Part Number
HSTTA19-Y
HSTTA25-Y
HSTTA38-Y
HSTTA50-Y
HSTTA75-Y
HSTTA100-Y
HSTTA150-Y
152
Maximum
Minimum
Nominal
Diameter Expanded I.D. Recovered I.D.
in. (mm)
in. (mm)
in.
3/16
1/4
3/8
1/2
3/4
1
1 1/2
.187 (4.8)
.250 (6.4)
.375 (9.5)
.500 (12.7)
.750 (19.0)
1.00 (25.4)
1.50 (38.1)
Most commonly used parts appear in BOLD.
.062 (1.6)
.080 (2.0)
.120 (3.0)
.160 (4.1)
.250 (6.4)
.320 (8.1)
.510 (12.9)
Std.
Pkg.
Qty.*
Std.
Ctn.
Qty.
6 pcs.
4 pcs.
3 pcs.
3 pcs.
2 pcs.
2 pcs.
1 pcs.
10 Pkgs.
10 Pkgs.
10 Pkgs.
10 Pkgs.
10 Pkgs.
10 Pkgs.
10 Pkgs.
*Order in multiples of std. pkg. qty.
▲Shrink ratios are approximations; please refer to above ordering information for the exact min. expanded
and max. recovered I.D.’s
Dual Wall Polyolefin DAMP-SHRINK ™ Heat Shrink Tubing
HSTTRA Heat Shrink
• For damp locations
• Semi-rigid tubing
• Adhesive inner wall which seals and protects
components from moisture and corrosion
• Provides a rugged seal from the elements
Materials
Type
Polyolefin Cross-Linked
with Adhesive
HSTTRA
600V
Semi-Rigid
-67°F to 230°F
(-55°C to 110°C)
AMS-DTL-23053/4
Class 1
Shrink Ratio:▲
2.5:1
HSTTRA in Standard Packages — 4' (1.2m) Pieces — Black Only
Part Number
HSTTRA12-48-Q
HSTTRA19-48-Q
HSTTRA25-48-Q
HSTTRA38-48-Q
HSTTRA50-48-5
HSTTRA75-48-5
HSTTRA100-48-5
Nominal
Diameter
in.
Minimum
Expanded I.D.
in. (mm)
Maximum
Recovered I.D.
in. (mm)
Nominal
Recovered Wall
Thickness
in. (mm)
Length
Feet (m)
Std.
Pkg.
Qty.*
1/8
3/16
1/4
3/8
1/2
3/4
1
.125 (3.2)
.187 (4.8)
.250 (6.4)
.375 (9.5)
.500 (12.7)
.750 (19.0)
1.00 (25.4)
.023 (0.6)
.060 (1.5)
.080 (2.0)
.135 (3.4)
.195 (5.0)
.313 (8.0)
.400 (10.6)
.038 (1.0)
.043 (1.1)
.047 (1.2)
.050 (1.3)
.059 (1.5)
.065 (1.7)
.075 (1.9)
4 (1.2)
4 (1.2)
4 (1.2)
4 (1.2)
4 (1.2)
4 (1.2)
4 (1.2)
25 Pcs.
25 Pcs.
25 Pcs.
25 Pcs.
5 Pcs.
5 Pcs.
5 Pcs.
*Order in multiples of std. pkg. qty.
▲Shrink ratios are approximations; please refer to above ordering information for the exact min. expanded
and max. recovered I.D.’s.
Most commonly used parts appear in BOLD.
153
Thick Wall Polyolefin WET-SHRINK ™ Heat Shrink Tubing
HST Thick Wall Heat Shrink
• Suitable for wet locations and direct burial according to UL 486D
• Provides excellent protection above or below ground level
• Adhesive lined inner wall seals and protects against moisture
Type
Material
Polyolefin Cross-Linked
with Adhesive
HST
(Black Only)
Including HST3.0
600V
-85°F to 230°F
(-65°C to 110°C)
AMS-DTL-23053/15
(HST only)
Listed 6R72
(except HST3.0)
Rigid
Shrink Ratio:▲
3:1
Flame Retardant
Thick Wall Heat Shrink Part Number System
HST
Type
HST
0.4 -
3
-
Q
Tube Length
3 = 3" (76.2mm)
6 = 6" (152.4mm)
9 = 9" (228.6mm)
12 = 12" (304.8mm)
48 = 4' (1.2m)
Expanded Diameter
0.4 = .40" (10.2mm)
0.8 = .80" (20.3mm)
1.1 = 1.10" (27.9mm)
1.5 = 1.50" (38.1mm)
2.0 = 2.00" (50.8mm)
3.0 = 3.00" (76.2mm)
2
Package Quantity
1 = 1 Pc.
2 = 2 Pcs.
3 = 3 Pcs.
5 = 5 Pcs.
X = 10 Pcs.
Q = 25 Pcs.
Color
None = Black
2 = Red
HST in Standard Packages
Part
Number
(Black)
Minimum Maximum
Nominal
Expanded Recovered Recovered
I.D.
I.D.
Wall Thickness
in. (mm)
in. (mm)
in. (mm)
HST0.4-3-Q‡
HST0.4-6-3
.40 (10.1)
.15 (3.8)
HST0.4-6-X‡
HST0.4-48-5‡
HST0.8-6-3
HST0.8-6-X‡
.80 (20.3)
.25 (6.4)
HST0.8-9-X‡
HST0.8-12-5‡
HST0.8-48-5‡
HST1.1-6-3
HST1.1-6-X‡
HST1.1-9-2
1.10 (27.9) .37 (9.4)
HST1.1-9-X‡
HST1.1-12-5‡
HST1.1-48-5‡
HST1.5-9-X
HST1.5-12-1
1.50 (38.1) .50 (12.7)
HST1.5-12-5
HST1.5-48-5
HST2.0-9-5
HST2.0-12-2
2.00 (50.8) .67 (16.9)
HST2.0-48-2
HST3.0-12-2
3.00(76.2) 1.00 (25.4)
HST3.0-48-2
154
Most commonly used parts appear in BOLD.
.09 (2.3)
.11 (2.8)
.12 (3.0)
.17 (4.3)
.17 (4.3)
.17 (4.3)
Conductor
Size Range
AWG/kcmil
(mm2 )
Minimum Maximum
Cable Connector Tube
O.D.
O.D. in.
Length
in. (mm) in. (mm)
(mm)
3 (76.2)
#12-#6
.170
.350
6 (152.4)
(4-16)
(4.3)
(8.9)
6 (152.4)
4' (1.2M)
6 (152.4)
6 (152.4)
#8-#1/0
.240
.650
9 (228.6)
(10-55)
(6.1)
(16.5)
12 (304.8)
4' (1.2M)
6 (152.4)
6 (152.4)
#2-#4/0
.400
.875
9 (228.6)
(35-120)
(10.1)
(22.2)
9 (228.6)
12 (304.8)
4' (1.2M)
9 (228.6)
#3/0-400 kcmil
.600
1.190
12 (304.8)
(95-185)
(15.2)
(30.2)
12 (304.8)
4' (1.2M)
9 (228.6)
250-600 kcmil
.750
1.600
12 (304.8)
(125-300)
(19.1)
(40.6)
4' (1.2M)
600-1250 kcmil
1.20
2.250
12 (304.8)
(300-625)
(30.5)
(57.2)
4' (1.2M)
Std.
Pkg.
Qty.*
25 PCS.
3 PCS.
10 PCS.
5 PCS.
3 PCS.
10 PCS.
10 PCS.
5 PCS.
5 PCS.
3 PCS.
10 PCS.
2 PCS.
10 PCS.
5 PCS.
5 PCS.
10 PCS.
1 PC.
5 PCS.
5 PCS.
5 PCS.
2 PCS.
2 PCS.
2 PCS.
2 PCS.
Std. Ctn.
Qty.
4 Pkgs.
10 Pkgs.
10 Pkgs.
4 Pkgs.
10 Pkgs.
10 Pkgs.
10 Pkgs.
10 Pkgs.
4 Pkgs.
10 Pkgs.
10 Pkgs.
10 Pkgs.
10 Pkgs.
10 Pkgs.
4 Pkgs.
10 Pkgs.
10 Pkgs.
10 Pkgs.
4 Pkgs.
10 Pkgs.
10 Pkgs.
4 Pkgs.
10 Pkgs.
4 Pkgs.
*Order in multiples of std pkg. qty.
‡For red, add 2 to end of part number package suffix (example HST0.4-3-Q2).
▲ Shrink ratios are approximations; please refer to above ordering information for the exact min. expanded and max. recovered I.D.’s.
Polyolefin WET-SHRINK ™ Thick Wall End Caps
HSEC Thick Wall End Caps
• For wet locations
• Provides excellent protection for sealing ends of wire or cable
• Adhesive lined inner wall seals and protects against moisture
Type
Materials
Polyolefin Cross-Linked
with Adhesive
HSEC
-67°F to 221°F
(-55°C to 105°C)
600V
Shrink Ratio:▲
3:1
Rigid
Thick Wall End Caps Part Number System
HSEC - 0.5
Type
HSEC
-
X
Package Quantity
2 = 2 Pcs.
5 = 5 Pcs.
X = 10 Pcs.
Expanded Diameter
0.5 = .47" (11.9mm)
0.8 = .79" (20.1mm)
1.0 = 1.02" (25.9mm)
1.5 = 1.58" (40.1mm)
2.0 = 2.25" (57.2mm)
4.0 = 4.14" (105.2mm)
Thick Wall End Caps in Standard Packages — Black Only
Part
Number
Minimum
Expanded
I.D.
in. (mm)
Maximum
Recovered
I.D. in. (mm)
Nominal
Recovered
Wall
Thickness
in. (mm)
HSEC0.5-X
HSEC0.8-X
.47 (11.9)
.79 (20.1)
.18 (4.6)
.30 (7.6)
.10 (2.5)
.10 (2.5)
HSEC1.0-X
HSEC1.5-5
1.02 (25.9)
1.58 (40.1)
.45 (11.4)
.68 (17.3)
.10 (2.5)
.11 (2.8)
HSEC2.0-5
HSEC4.0-2
2.25 (57.2)
4.14 (105.2)
.87 (22.1)
1.78 (45.2)
.15 (3.8)
.15 (3.8)
Conductor
Size
Cap Length
in. (mm)
#8 TO #4 AWG (10 TO 25mm2 )
#4 TO 3/0 AWG (25 TO 95mm2)
#2 TO 4/0 AWG (35 TO 95mm2)
250 TO 500 kcmil (120 TO 240mm2)
600 TO 1000 kcmil (300 TO 500mm2)
1500 TO 2000 kcmil (720 TO 1000mm2 )
*Order in multiples of std. pkg. qty.
▲Shrink ratios are approximations; please refer to above ordering information for the exact min. expanded
and max. recovered I.D.’s.
Std.
Pkg.
Qty.*
Std.
Ctn.
Qty.
1.38 (35.1) 10 PCS . 10 Pkgs.
2.13 (54.1) 10 PCS . 10 Pkgs.
3.23 (82.0) 10 PCS . 10 Pkgs.
3.86 (98.0) 5 PCS. 10 Pkgs.
5.52 (140.2) 5 PCS. 10 Pkgs.
6.90 (175.3) 2 PCS. 5 Pkgs.
Most commonly used parts appear in BOLD.
155
Heat Shrink Tubing Kits
Plastic Kit Boxes
• Provides organized storage for a wide variety of parts in one convenient location
• Informative label eliminates guess work:
— Specifies correct heat shrink usage based on wire range and connector size
— Provides reorder part number information
• Once top is closed, loose pieces remain in their 6 compartments
• Available with non-adhesive or adhesive lined heat shrink tubing for dry and damp locations
KP-HSTT1 Contents
For Dry Locations
BLACK POLYOLEFIN DR Y-SH RINK ™ HEAT SHR INK TUBIN G (TYPE HSTT)
IN 6" (152.4mm) LEN GTH S
2:1 SHR INK RATIO
AMS-DTL-23053/5
C LASS 1
35 EAC H
HSTT09 3/32" (2.4mm) I.D.
HSTT12 1/8" (3.2mm) I.D.
21 EAC H
HSTT19 3/16" (4.8mm) I.D.
HSTT25 1/4" (6.4mm) I.D.
KP-HSTT2 Contents
7 EACH
HSTT38 3/8" (9.5mm) I.D.
HSTT50 1/2" (12.7mm) I.D.
For Dry Locations
M ULTIPLE COLOR POLYOL EFIN DRY -SHR INK ™ HEAT SH RINK TUBING (TYPE HSTT)
IN 6" (152.4mm) LENGTHS
2:1 SH RINK RATIO
(Except Clear)
35 EACH
HSTT09 3/32" (2.4mm) I.D.
- 7 COLOR S
HSTT12 1/8" (3.2mm) I.D.
- 7 COLOR S
(Except Clear)
21 EACH
HSTT19 3/16" (4.8mm) I.D.
- 7 COLOR S
HSTT25 1/4" (6.4mm) I.D.
- 7 COLOR S
AMS-DTL-23053/5
C LASS 1 & 2
7 EAC H
HSTT38 3/8" (9.5mm) I.D.
- 7 COLOR S
HSTT50 1/2" (12.7mm) I.D.
- 7 COLOR S
Note: Colors include: Red, Yellow, Green, Blue, White, Clear and Black.
KP-HSTTA Contents
For Damp Locations
ADHESIVE LINED BLACK POLYOL EFIN DAMP-SH RINK ™ HEAT SHR INK TUBING (TYPE HSTTA)
IN 6" (152.4mm) L ENGTHS
3:1 SHR IN K RATIO
AMS-DTL-23053/4
CLASS 3
14 EACH
HSTTA19 3/16" (4.8mm) I.D.
10 EACH
HSTTA38 3/8" (9.5mm) I.D.
3 EACH
HSTTA75 3/4" (19.0mm) I.D.
12 EACH
HSTTA25 1/4" (6.4mm) I.D.
6 EACH
HSTTA50 1/2" (12.7mm) I.D.
2 EACH
HSTTA100 1" (25.4mm) I.D.
Order number of kits required.
156
Most commonly used parts appear in BOLD.
Heat Shrink Tools and Accessories
Mica insulation in the
heat element provides
extended life to HSG
Heat Tools.
Heat Tools
Listed 826N
(Heat Tools only)
Part
Number
HSG-115V-650
Description
• High temperature tool — For use on PANDUIT ® HSTT,
HSTTA, HSTTF, HSTTR, HSTTK, HSTTRA, HST
and HSEC
• Air intake regulator varies temperature from 650°F
(344°C) to 900°F (482°C) 115 Volt, 10 AMP
• Neoprene jacketed cord with molded strain relief
• Adjustable stand included
• Replaceable bearings, brushes and heating elements
HSG Heat tool with stand
Heat Reflector Accessory slips onto
heat tools
HSG-A1
DCT — Cutting Tool
Std.
Pkg.
Qty
1
Accessories
Part
Number
Heat Concentrator Accessory directs
heat to reduce shrink time
(Heat Tools
only)
Description
• Shrink tube reflector for tubing up to 3/4" inside diameter
• Directs heat around the tubing to reduce shrink time
Std.
Pkg.
Qty
1
HSG-A2
• Shrink tube reflector for tubing up to 1 1/2" inside diameter
• Directs heat around the tubing to reduce shrink time
1
HSG-A3
• Shrink tube concentrator
• Directs heat toward tubing and away from heat
sensitive items
1
HSG-A4
• Black polyethylene carrying case
• Stores heat tool, stand and all three accessories
1
DCT
• Cutting tool for use with HST Thick Wall Heat Shrink
Tubing only
1
Replacement Parts
Part
Number
HSG-P1
HSG-P2
HSG-P3
HSG-P7
Description
•
•
•
•
Brush/Spring Kit
Switch 20 Amp
Bearing Kit
Heat Element 650°F
Std.
Pkg.
Qty
1
1
1
1
Order number of heat tools, accessories and replacement parts required.
Carrying Case
Most commonly used parts appear in BOLD.
157
DRY-SHRINK ™, DAMP-SHRINK ™ and WET-SHRINK ™ Heat Shrink Tubing Technical Data
Heat Shrink Installation Instructions
General Instructions
Position heat shrink over the object to be covered. Using a heat gun, soft yellow flame torch, infrared heat
source or oven, evenly heat the tubing until it has fully recovered and conforms to the object. Use caution
not to char or burn the tubing.
Special Instructions for HSTTT
TFE tubing is the most difficult to shrink due to its high shrink temperature. TFE shrink tubing must be
heated to the gel state 621°F (327°C) to completely recover. This can be recognized when the tubing
changes from milky white to clear color. It can be shrunk with a heat gun or torch, however, it is very difficult
to use these methods since they have a tendency to overheat the tube in one area while other areas remain
too cool. The most reliable way to shrink TFE is in an oven. Position the heat shrink over the object to be
covered and place it in an oven set at 800°F (427°C) until the tubing turns clear. Once clear, remove
assembly from oven to prevent over heating and allow it to cool at room temperature. Do not quench in cold
air or water. Large objects, particularly metal tubing or rods, must be preheated to get a uniform shrink.
Size Selection for Heat Shrink Tubing
Generally, the largest tube that shrinks down tightly onto an object should be chosen. This allows the heat
shrink tubing maximum stress relief and this will yield the longest service life.
Example:
A multi-conductor cable needs to be covered with HSTT Type DR Y-SHRINK ™ Heat Shrink. The area to be
covered has a measured outside diameter of .700" (17.8mm). The two possibilities are HSTT75-48-5
and HSTT100-48-5.
Part Number
HSTT75-48-5
HSTT100-48-5
Expanded I.D.
in. (mm)
Recovered I.D.
in. (mm)
.750 (19.0)
1.00 (25.4)
.375 (9.5)
.500 (12.7)
The proper choice is HSTT100-48-5 since the tube will recover more than HSTT75-48-5. The HSTT75-48-5
will fit over the .700" (17.8mm) outside diameter; however, this is not the proper choice since it is smaller
than the HSTT100-48-5. In general, heat shrink should recover at least 10-20% to reduce stress and yield
158
Most commonly used parts appear in BOLD.
Heat Shrink Selection Guide
Recommended Tubing Size for Common Wire Types Based on Location
For Insulated Wire, Non-insulated Wire and Insulated Wire With Copper Connectors
Instructions for tube selection:
1) Determine Location Type.
LOCATION:
DRY — IP62: A location not normally subject to dampness or wetness. A location classified as dry may be temporarily subject to dampness or
wetness, as in the case of a building under construction.
DAMP — IP66: Partially protected locations under canopies, marquees, roofed open porches, and like locations, and interior locations subject to
moderate degrees of moisture, such as some basements, some barns and some cold-storage warehouses.
WET — IP68: Installations underground or in concrete slabs or masonry in direct contact with the earth, and locations subject to saturation with
water or other liquids, such as vehicle washing areas, and locations exposed to weather and unprotected.
2) Match wire size to location type under required application — insulated wire, non-insulated wire, or insulated wire with copper connectors.
3) Read corresponding part number.
4) Part numbers with “-Y” are packages containing 6" pieces. Part numbers with “-48” are 48" pieces.
5) Part numbers shown below are for black heat shrink. Consult relevant catalog section for color options.
Wire
Size
DR Y -SHRINK ™
24
22
20
18
16
14
12
10
8
6
4
3
2
1
1/0
2/0
3/0
4/0
250
300
350
400
500
600
700
750
800
900
1000
1250
1500
1750
2000
HSTT12-Y
HSTT12-Y
HSTT12-Y
HSTT19-Y
HSTT19-Y
HSTT19-Y
HSTT25-Y
HSTT25-Y
HSTT38-Y
HSTT50-Y
HSTT50-Y
HSTT50-Y
HSTT75-Y
HSTT75-Y
HSTT75-Y
HSTT100-Y
HSTT100-Y
HSTT100-Y
HSTT100-Y
HSTT150-48-5
HSTT150-48-5
HSTT150-48-5
HSTT150-48-5
HSTT150-48-5
HSTT200-48-5
HSTT200-48-5
HSTT200-48-5
HSTT200-48-5
HSTT200-48-5
HSTT300-48-2
HSTT300-48-2
HSTT300-48-2
HSTT300-48-2
Insulated Wire
Uninsulated Wire
Insulated Wire with Copper Connector
DAMP-SHR IN K ™ WET -SH RINK ™ DR Y -SHRINK ™ DAMP-SHRINK ™ WET-SHRINK ™ DRY -SHR IN K ™
DAMP WET -SHR IN K ™
™
SHRINK
HSTTA19-Y
—
—
—
—
HSTT12-Y
—
—
HSTTA19-Y
—
—
—
—
HSTT12-Y
—
—
HSTTA19-Y
—
HSTT06-Y
—
—
HSTT19-Y
HSTTA19-Y
—
HSTTA19-Y
—
HSTT06-Y
—
—
HSTT19-Y
HSTTA19-Y
—
HSTTA25-Y
—
HSTT06-Y
—
—
HSTT19-Y
HSTTA25-Y
—
HSTTA25-Y
—
HSTT12-Y
HSTTA19-Y
—
HSTT19-Y
HSTTA25-Y
—
HSTTA38-Y
HST0.4-48-5
HSTT12-Y
HSTTA19-Y
—
HSTT25-Y
HSTTA38-Y HST0.4-48-5
HSTTA38-Y
HST0.4-48-5
HSTT19-Y
HSTTA25-Y
—
HSTT25-Y
HSTTA38-Y HST0.4-48-5
HSTTA50-Y
HST0.4-48-5
HSTT25-Y
HSTTA25-Y
—
HSTT38-Y
HSTTA50-Y HST0.4-48-5
HSTTA50-Y
HST0.8-48-5
HSTT25-Y
HSTTA38-Y HST0.4-48-5
HSTT50-Y
HSTTA50-Y HST0.8-48-5
HSTTA75-Y
HST0.8-48-5
HSTT38-Y
HSTTA38-Y HST0.4-48-5
HSTT50-Y
HSTTA75-Y HST0.8-48-5
HSTTA75-Y
HST0.8-48-5
HSTT38-Y
HSTTA50-Y HST0.4-48-5
HSTT50-Y
HSTTA75-Y HST0.8-48-5
HSTTA100-Y HST0.8-48-5
HSTT50-Y
HSTTA50-Y HST0.8-48-5
HSTT75-Y
HSTTA100-Y HST0.8-48-5
HSTTA100-Y HST0.8-48-5
HSTT50-Y
HSTTA50-Y HST0.8-48-5
HSTT75-Y
HSTTA100-Y HST1.1-48-5
HSTTA100-Y HST1.1-48-5
HSTT50-Y
HSTTA75-Y HST0.8-48-5
HSTT75-Y
HSTTA100-Y HST1.1-48-5
HSTTA100-Y HST1.1-48-5
HSTT50-Y
HSTTA75-Y HST0.8-48-5 HSTT100-Y HSTTA100-Y HST1.1-48-5
HSTTA150-Y HST1.1-48-5
HSTT75-Y
HSTTA100-Y HST0.8-48-5 HSTT100-Y HSTTA150-Y HST1.5-48-5
HSTTA150-Y HST1.5-48-5
HSTT75-Y
HSTTA100-Y HST1.1-48-5 HSTT100-Y HSTTA150-Y HST1.5-48-5
HSTTA150-Y HST1.5-48-5 HSTT100-Y HSTTA100-Y HST1.1-48-5 HSTT100-Y HSTTA150-Y HST1.5-48-5
HSTTA150-Y HST1.5-48-5 HSTT100-Y HSTTA100-Y HST1.1-48-5 HSTT150-Y HSTTA150-Y HST1.5-48-5
HSTTA150-Y HST1.5-48-5 HSTT100-Y HSTTA150-Y HST1.5-48-5 HSTT150-48-5 HSTTA150-Y HST2.0-48-2
HSTTA150-Y HST2.0-48-2 HSTT100-Y HSTTA150-Y HST1.5-48-5 HSTT150-48-5 HSTTA150-Y HST2.0-48-2
HSTTA150-Y HST2.0-48-2 HSTT100-Y HSTTA150-Y HST1.5-48-5 HSTT150-48-5 HSTTA150-Y HST2.0-48-2
HSTTA150-Y HST2.0-48-2 HSTT150-48-5 HSTTA150-Y HST2.0-48-2 HSTT150-48-5 HSTTA150-Y HST2.0-48-2
HSTTA150-Y HST2.0-48-2 HSTT150-48-5 HSTTA150-Y HST2.0-48-2 HSTT200-48-5
—
HST2.0-48-2
HSTTA150-Y HST3.0-48-2 HSTT150-48-5 HSTTA150-Y HST2.0-48-2 HSTT200-48-5
—
HST3.0-48-2
—
HST3.0-48-2 HSTT150-48-5 HSTTA150-Y HST2.0-48-2 HSTT200-48-5
—
HST3.0-48-2
—
HST3.0-48-2 HSTT150-48-5 HSTTA150-Y HST2.0-48-2 HSTT200-48-5
—
HST3.0-48-2
—
HST3.0-48-2 HSTT200-48-5 HSTTA150-Y HST2.0-48-2 HSTT200-48-5
—
HST3.0-48-2
—
HST3.0-48-2 HSTT200-48-5 HSTTA150-Y HST2.0-48-2
—
—
HST3.0-48-2
—
HST3.0-48-2 HSTT200-48-5
—
HST3.0-48-2
—
—
—
—
HST3.0-48-2 HSTT200-48-5
—
HST3.0-48-2
—
—
—
—
HST3.0-48-2 HSTT200-48-5
—
HST3.0-48-2
—
—
—
Sizing information is based on the following wire types: MTW, THHN, THWN, TFN, THW, TW, TF, RHW, RH, RHH AND UL1015.
THHN is the most common wire type.
Portions reprinted with permission from NFPA, the National Electrical Code ® Handbook, Copyright© 1996, National Fire Protection Association,
Quincy, MA 02269.
All rights reserved. National Electrical Code ® and NEC ® are registered trademarks of the National Fire Protection Association, Inc.,
Quincy, MA 02269.
159
IP (Ingress Protection) as defined by the International Standard IEC 529
The IEC 529 international standard describes a system for classifying the degrees of protection provided by
the enclosures of electrical equipment and is a recognized standard around the world. An independent test
laboratory has tested PANDUIT ® Heat Shrink Tubing to the IEC 529 standard. The following information
exhibits the IP ratings for PANDUIT ® Heat Shrink tubing and how each of the IP ratings relates to the USA.
IP
x
x
Ingress
Protection
The first characteristic numeral indicates the level of
protection against the ingress of solid foreign objects.
The second characteristic numeral indicates the level of
protection against the ingress of water.
1st Characteristic Numeral
2nd Characteristic Numeral
1st Characteristic Numeral
Ingress
Protection Meaning for
PANDUIT ®
(IP)
Protection
Heat Shrink
DR Y -SHRINK ™,
DAMP-SHR IN K ™ and
WET -SHRINK ™
Against
ingress of
solid object
0
1
2
3
4
5
6
Non-Protected
50mm diameter
12.5mm diameter
2.5mm diameter
1.0mm diameter
Dust Protected
Dust Tight
2nd Characteristic Numeral
Ingress
Protection
Meaning for
PANDUIT ®
(IP)
Protection
Heat Shrink
DR Y-SH RINK ™ Heat Shrink Tubing
DAMP -SHRINK ™ Heat Shrink Tubing
WET-SH RINK ™ Heat Shrink Tubing
Intended Application Location:
Ingress
Protection
Rating:
Against
ingress of
water
0
1
2
3
4
5
6
7
8
Non-Protected
Vertically Dripping
Dripping (15° tilted)
Spraying
Splashing
Jetting
Powerful Jetting
Temporary Immersion
Continuous Immersion
Description:
DRY Locations not normally subject to moisture
Protected against the ingress of dust but not
protected against the ingress of water.
DAMP Locations subjected to moderate
degrees of water and moisture
Protected against the ingress of dust and protected
against the ingress of a power jet of water.
WET Locations are defined as underground
burial or immersion in water
Protected against the ingress of dust and protected
against the ingress of water to a depth of 10 meters.
Does not include PANDUIT ® DRY-SHRINK ™ HSTTT (TEFLON —TFE)
DR Y -SHRINK ™ Heat Shrink has been tested in accordance with EN 60529 paragraph 13.4 thereby providing
PANDUIT ® DRY -SHR INK ™ Heat Shrink with an ingress protection rating of IP62.
DAMP -SHRINK ™ Heat Shrink has been tested in accordance with EN 60529 paragraph 13.4 and with
paragraph 14.2.6 thereby providing PANDUIT ® DAMP-SHRINK ™ with an ingress protection rating of IP66.
WET-SHRINK ™ Heat Shrink has been tested in accordance with EN 60529 paragraph 13.4, paragraph 14.2.6
and with paragraph 14.2.7 thereby providing WET-SHRINK ™ Heat Shrink with an ingress protection rating of
IP68. PANDUIT ® WET-SHRINK ™ Heat Shrink has passed EN 60529 paragraph 14.2.7 at depth of 10 meters.
160
Most commonly used parts appear in BOLD.
DRY-SHRINK ™ , DAMP-SHRINK ™ and WET-SHRINK ™ Heat Shrink Tubing
Technical Data
General Information
Specific
Water
Gravity Flammability Absorption
Economical and easy way to insulate, protect, Class 1, Class 1 Self 0.5% MAX.
harness and identify electrical and electronic
1.35
Extinguishing
ASTM
components in a wide variety of applications. Class 2, Class 2 N/A
D570
Black is U.V. Resistant.
1.0
ASTM D2671
ASTM
Procedure B
D792
Use where UL recognition with VW-1 rating is
1.50
Self
0.5% MAX.
required. Use where the wire component
ASTM
Extinguishing
ASTM
cannot tolerate higher shrink temperatures,
D792
ASTM D2671
D570
reduces application time to insulate, protect,
Procedure C
identify, etc. Black is U.V. Resistant.
Dielectric
Strength
500 V/MIL.
(19.7 Kv/mm) min.
ASTM D2671
Page
No.
500 V/MIL.
(19.7 Kv/mm) min.
ASTM D2671
145146
HSTTVA
Seals and protects components from
moisture and corrosion. Use where a flexible
tubing is needed. Suitable for damp locations.
N/A
500 V/MIL.
(19.7 Kv/mm) min.
ASTM D2671
151
HSTTRA
Environmentally seals and protects
components forming a rugged and heavy duty
covering. The 2.5:1 shrink ratio is a benefit
when working with connector to cable
transitions. Suitable for damp locations.
N/A
Self
0.5% MAX.
Extinguishing
ASTM
ASTM D2671
D570
Procedure B
N/A
0.5% MAX.
ASTM
D570
500 V/MIL.
(19.7 Kv/mm) min.
ASTM D2671
153
HSTTA
Environmentally seals and protects
components. The 3:1 shrink ratio is a benefit
when working with connector to cable
transitions. Suitable for damp locations.
N/A
Self
1.0% MAX.
Extinguishing
ASTM
ASTM D2671
D570
Procedure B
300 V/MIL.
(11.8 Kv/mm) min.
ASTM D2671
152
HST
Seals and protects electrical connections and 1.2 MAX.
Self
0.5% MAX.
splices above or below ground, 3:1 shrink
Extinguishing
ASTM
ratio. Suitable for outdoor and wet locations.
ASTM D2671
D570
Procedure C
Ripple free conformance around sharp bends
1.35
Self
1.0% MAX.
as in appliance handles and bus bars. Good
MAX.
Extinguishing
ASTM
cut through and solder-iron resistance.
ASTM D876
D570
Black is U.V. Resistant.
200 V/MIL.
(7.9 Kv/mm) min.
ASTM D2671
154
400 V/MIL.
(15.8 Kv/mm) min.
ASTM D2671
147
300V/MIL.
(11.8 Kv/mm) min.
ASTM D2671
148
Size to .500"
(12.7mm)
800V/MIL.
(31.5 Kv/mm)min.
Over .500" (12.7mm)
600 V/MIL
(23.6 Kv/mm) min.
ASTM D2671
800 V/MIL.
(31.5 Kv/mm) min.
ASTM D2671
150
Product
Type
HSTT
HSTTV
HSTTP
Typical Applications
HSTTN
Insulation and abrasion resistance, extensive
military uses on vehicles and ship-board.
Excellent chemical resistance especially to
fuels and oils. Black is U.V. Resistant.
1.30
ASTM
D792
HSTTK
Protection and strain relief for wires or
connectors in a high temperature or solvent
rich environment. Insulation of heater leads.
1.8 MAX.
ASTM
D792
Pass
MIL-DTL23053/8B
4.6.15.3
0.5% MAX.
ASTM
D570
HSTTT
High insulation and abrasion resistance. High 2.2 MAX.
temperature, strain relief, resists corrosive
ASTM
atmospheres, self lubrication and nonD792
wetting. Can be used with fiber optics and as
a strain relief for high density connectors.
It is U.V. Resistant
N/A
Nonflammable
0.01%
MAX.
ASTM
D570
Self
1.0% MAX.
Extinguishing
ASTM
ASTM D876
D570
141144
149
Most commonly used parts appear in BOLD.
161
PVC Tubing
Non-Shrink PVC Tubing
• Provides insulation and protection for lead
wires, wire harness assemblies, soldered joints
and components in electrical and
electronic equipment
• Material: Polyvinyl chloride (PVC)
• Voltage Rating: 300V and 600V
• All purpose, flexible, non-shrinkable
• Resistant to heat and moisture
• Applicable Specifications:
UL224 VW-1
CSA C22.2 No. 198.1 (OFT)
ASTM D-922, Grade CFR
MIL-I-631, Type F, Form U, Grade C
Class 1, Category 1
VW-1
OFT
The Functional Part Number System Makes Ordering Easy
Non-Shrink PVC Tubing Part Number System
TV105 - 19 M
Type
Polyvinyl
Chloride
Tubing
162
Most commonly used parts appear in BOLD.
Nominal Size
22 = 22 AWG
4 = 4 AWG
20 = 20 AWG
3 = 3 AWG
19 = 19 AWG
2 = 2 AWG
18 = 18 AWG
1 = 1 AWG
16 = 16 AWG
0 = 0 AWG
15 = 15 AWG
.25 = 1/4"
14 = 14 AWG
.31 = 5/16"
12 = 12 AWG
.38 = 3/8"
10 = 10 AWG
.44 = 6/16"
9 = 9 AWG
.50 = 1/2"
8 = 8 AWG
.56 = 9/16"
7 = 7 AWG
.63 = 5/8"
6 = 6 AWG
.75 = 3/4"
5 = 5 AWG
1.0 = 1"
Package Quantity
L = 50' (15.2m)
C = 100' (30.5m)
TL = 250' (76.2m)
D = 500' (152.4m)
M = 1000' (304.8m)
2.5M = 2500' (762m)
PVC Tubing
Non-Shrink PVC Tubing
Type
Materials
Polyvinyl Chloride
TV105
VW-1
OFT
Part Number
Black
Nominal
Size/
Trade
Name
Inside Diameter — in. (mm)
Part Number
Clear
Maximum
Minimum
TV105-242.5M
TV105-242.5M20
TV105-222.5M20
TV105-20M20
TV105-19M20
TV105-18M20
TV105-17M20
24 AWG
22 AWG
20 AWG
19 AWG
18 AWG
17 AWG
.027
.032
.039
.042
.049
.053
(0.68)
(0.81)
(0.99)
(1.06)
(1.24)
(1.34)
.020 (0.51)
.025 (0.69)
.032 (0.81)
.036 (0.91)
.040 (1.02)
.045 (1.14)
TV105-16M20
TV105-15M20
TV105-14M20
TV105-13M20
TV105-12D20
TV105-11D20
TV105-10D20
TV105-9D20
TV105-8D20
TV105-7D20
16 AWG
15 AWG
14 AWG
13 AWG
12 AWG
11 AWG
10 AWG
9 AWG
8 AWG
7 AWG
.061
.066
.072
.080
.089
.101
.112
.124
.141
.158
(1.54)
(1.67)
(1.82)
(2.03)
(2.26)
(2.56)
(2.84)
(3.14)
(3.58)
(4.01)
.051 (1.30)
.057 (1.45)
.064 (1.63)
.072 (1.83)
.081 (2.06)
.091 (2.31)
.102 (2.59)
.114 (2.90)
.129 (3.28)
.144 (3.66)
TV105-222.5M
TV105-20M
TV105-19M
TV105-18M
TV105-17M
TV105-16M
TV105-15M
TV105-14M
TV105-13M
TV105-12D
TV105-11D
TV105-10D
TV105-9D
TV105-8D
TV105-7D
TV105-6TL
TV105-5TL
TV105-4TL
TV105-3TL
TV105-2TL
TV105-1TL
TV105-0TL
TV105-.25TL
TV105-.31TL
TV105-.38TL
TV105-.44TL
TV105-.50TL
TV105-.56C
TV105-.63C
TV105-.75C
TV105-.88C
TV105-1.0L
TV105-1.25L
TV105-1.50L
TV105-6TL20
TV105-5TL20
TV105-4TL20
TV105-3TL20
TV105-2TL20
TV105-1TL20
TV105-0TL20
TV105-.25TL20
TV105-.31TL20
TV105-.38TL20
TV105-.44TL20
TV105-.50TL20
TV105-.56C20
TV105-.63C20
TV105-.75C20
TV105-.88C20
TV105-1.0L20
TV105-1.25L20
TV105-1.50L20
*Order in multiples of std. pkg. qty.
**UL voltage rating is a function of wall thickness.
6
5
4
3
2
1
0
AWG
AWG
AWG
AWG
AWG
AWG
AWG
1/4
5/16
3/8
7/16
.178 (4.52)
.198 (5.02)
.224 (5.68)
.249 (6.32)
.278 (7.06)
.311 (7.89)
.347 (8.81)
.265 (6.73)
.334 (8.48)
.399 (10.13)
.462 (11.73)
.162 (4.11)
.182 (4.62)
.204 (5.18)
.229 (5.82)
.258 (6.55)
.289 (7.34)
.325 (8.26)
.245 (6.22)
.313 (7.95)
.375 (9.53)
.438 (11.13)
1/2
9/16
5/8
3/4
7/8
1
1 1/4
1 1/2
.524 (13.30)
.585 (14.85)
.655 (16.63)
.786 (19.96)
.911 (23.13)
1.036 (26.31)
1.290 (32.76)
1.550 (39.37)
.500 (12.70)
.563 (14.30)
.625 (15.88)
.750 (19.05)
.875 (22.23)
1.000 (25.40)
1.250 (31.75)
1.500 (38.10)
300V/600V**
-4°F to 221°F
(-20°C to 105°C)
MIL-I-631,Type F,
Form U Grade C
Class 1, Cat 1
Highly Flexible
Oil Resistant
Highly Flame
Retardant VW-1
Wall
Max.
Thickness
Volt
in. (mm) Rating**
.012 (.30)
.016 (.41)
300V
.025 (.64)
.035 (.89)
.040 (1.02)
.045 (1.14)
Std.
Ctn.
Qty.
2500 (762m)
2500 (762m)
1000 (304.8m)
1000 (304.8m)
1000 (304.8m)
1000 (304.8m)
2 Reels
2 Reels
2 Reels
2 Reels
2 Reels
2 Reels
1000 (304.8m)
1000 (304.8m)
1000 (304.8m)
1000 (304.8m)
500 (152.4m)
500 (152.4m)
500 (152.4m)
500 (152.4m)
500 (152.4m)
500 (152.4m)
2 Reels
2 Reels
2 Reels
2 Reels
2 Reels
2 Reels
2 Reels
2 Reels
2 Reels
2 Reels
250
250
250
250
250
250
250
250
250
.020 (.51)
.030 (.76)
Std.
Pkg.
Qty.*
600V
(76.2m)
(76.2m)
(76.2m)
(76.2m)
(76.2m)
(76.2m)
(76.2m)
(76.2m)
(76.2m)
2 Reels
2 Reels
2 Reels
2 Reels
2 Reels
2 Reels
2 Reels
2 Reels
2 Reels
250 (76.2m)
250 (76.2m)
2 Reels
2 Reels
250 (76.2m)
100 (30.5m)
100 (30.5m)
100 (30.5m)
100 (30.5m)
50 (15.2m)
50 (15.2m)
50 (15.2m)
2 Reels
2 Reels
2 Reels
2 Reels
2 Reels
2 Reels
2 Reels
2 Reels
Most commonly used parts appear in BOLD.
163
Spiral Wrap
Spiral Wrap
U.L. Recognized
• Large variety of colors, materials and sizes
• Available in seven different materials and twelve
different colors
• Can be used to color code wire bundles
• Flexible, neat, fast
• Allows breakouts of single/multiple wires and
rerouting of replacement wires
• Harness multiple cables into a single
manageable bundle
• Abrasion protection for wires, cables, hoses and tubing
• Reusable
• Tool supplied in each package
Suggested Applications
• Organize wires for communication and computer
equipment where access to the wires is required
• In OEM applications for protecting tubes
and harnesses
• Abrasion protection for control panel wiring
• Personal computer and printer wire organization
• Protect glass tubes from abrasion and breakage
• Kink-proofing for all kinds of tubing... ideal
for laboratories
• Eliminates lacing cord and tie-offs
• Use orange or yellow spiral wrap for protecting and
identifying fiber optic cables
164
Most commonly used parts appear in BOLD.
Spiral Wrap
The Functional Part Number System Makes Ordering Easy
Spiral Wrap Part Number Description
T
Type
T = Spiral Wrap
Outside Diameter
12 = 1/8"
25 = 1/4"
38 = 3/8"
50 = 1/2"
62 = 5/8"
75 = 3/4"
100 = 1"
25 F - C 16
Material
F = Polyethylene and Weather
Resistant Polyethylene
R = Fire Resistant - UL94V-2
FR = Flame Retardant - UL94V-0
N = Nylon
T = TEFLON‡
Package Quantity
X = 10'
Q = 25'
L = 50'
C = 100'
T = 200'
TL = 250'
D = 500'
M = 1000'
Color Suffix
See Table Below
Material Availability
Weather
Flame
Resistant Fire Resistant
Retardant
Polyethylene Polyethylene Polyethylene Polyethylene
Color
Color
Suffix*
Natural
(Opaque to
Translucent)
No Suffix
will be
listed
Weather Resistant
Black
0
Brown
1
✔
✔ (Natural
✔ (Natural
color is white) color is white)
✔
Nylon
Weather
Resistant
Nylon
✔
✔
Red
2
✔
Orange
3
✔
Yellow
4
✔
Green
5
✔
Blue
6
✔
Purple
7
✔
Gray
8
✔
White
10
✔
Pink
16
✔
Black
20
TEFLON‡
✔
✔
✔
✔
Blank = Not applicable
*Colors are stocked for 1/4" and 1/2" polyethylene. Other sizes available, contact PANDUIT ® Technical Assistance 866-405-6657.
‡TEFLON or equivalent fluorocarbon PTFE material is used. TEFLON is a registered trademark of E.I. DuPont de Nemours Co.
Most commonly used parts appear in BOLD.
165
Spiral Wrap
B
A
U.L. Recognized
T
Part
Number
Material
T12F-C
T19F-C
T25F-X
T25F-C
T25F-C1
T25F-C10
T25F-C16
T25F-C2
T25F-C3
T25F-C4
T25F-C5
T25F-C6
T25F-C7
T25F-C8
T38F-C
Polyethylene
T50F-X
T50F-C
T50F-C1
T50F-C10
T50F-C16
T50F-C2
T50F-C3
T50F-C4
T50F-C5
T50F-C6
T50F-C7
T50F-C8
T62F-C
T75F-C
T100F-C
T12F-C0
T19F-C0
T25F-X0
T25F-C0
Weather
T38F-C0
Resistant
T50F-X0 Polyethylene
T50F-C0
T62F-C0
T75F-C0
T100F-C0
166
Color
A
Outside Dia.
in. (mm)
B
in. (mm)
T
in. (mm)
Bundle Size
in. (mm)
.125 (3.2)
.188 (4.8)
.218 (5.5)
.250 (6.4)
.03 (.76)
.035 (.89)
.064 (1.6) – .50 (12.7)
.125 (3.2) – 1.00 (25.4)
Natural
Brown
White
Pink
Red
Orange
Yellow
Green
Blue
Purple
Gray
.25 (6.4)
.375 (9.5)
.04 (1.02)
.188 (4.8) – 2.00 (50.8)
100 (30.5)
.375 (9.5)
Natural
Black
Most commonly used parts appear in BOLD.
100 (30.5)
10 (3.0)
.437 (11.1)
.055 (1.4)
.316 (7.9) – 3.00 (76.2)
10 (3.0)
Natural
Brown
White
Pink
Red
Orange
Yellow
Green
Blue
Purple
Gray
Std.
Pkg.
Qty.*
Ft. (m)
.50 (12.7)
.50 (12.7)
.06 (1.5)
.38 (9.5) – 4.00 (101.6)
100 (30.5)
.625 (15.9)
.75 (19.1)
1 (25.4)
.125 (3.2)
.188 (4.8)
.625 (15.9)
.875 (22.2)
1.125 (28.6)
.218 (5.5)
.250 (6.4)
.062 (1.57)
.065 (1.65)
.07 (1.78)
.03 (.760)
.035 (0.89)
.50 (12.7) – 4.50 (114.3)
.625 (15.9) – 5.00 (127.0)
.875 (22.2) – 6.00 (152.4)
.064 (1.6) – .50 (12.7)
.125 (3.2) – 1.00 (25.4)
.25 (6.4)
.375 (9.5)
.04 (1.02)
.188 (4.8) – 2.00 (50.8)
.375 (9.5)
.437 (11.1)
.055 (1.4)
.316 (7.9) – 3.00 (76.2)
.5 (12.7)
.5 (12.7)
.06 (1.5)
.375 (9.5) – 4.00 (101.6)
.625 (15.9)
.75 (19.1)
1 (25.4)
.625 (15.9)
.875 (22.2)
1.125 (28.6)
.062 (1.57)
.065 (1.65)
.07 (1.78)
.50 (12.7) – 4.50 (114.3)
.625 (15.9) – 5.00 (127.0)
.875 (22.2) – 6.00 (152.4)
10 (3.0)
100 (30.5)
10 (3.0)
100 (30.5)
*Order in multiples of standard package quantity.
Note: Custom cut-to-length sizes are available upon request. Contact PANDUIT ® Technical Assistance 866-405-6657 for details.
Spiral Wrap
B
A
U.L. Recognized
T
Part
Number
T12R-C
T19R-C
T25R-C
T25R-C20
T38R-C
T50R-C
T62R-C
T75R-C
T100R-C
T12FR-C
T12FR-C20
T19FR-C
T19FR-C20
T25FR-C
T25FR-C20
T38FR-C
T38FR-C20
T50FR-C
T50FR-C20
T62FR-C
T62FR-C20
T75FR-C
T75FR-C20
T100FR-C
T100FR-C20
T12N-C
T12N-C0
T19N-C
T19N-C0
T25N-C
T25N-C0
T38N-C
T38N-C0
T50N-C
T50N-C0
T62N-C
T62N-C0
T75N-C
T75N-C0
T100N-C
T100N-C0
T12T-C
T19T-C
T25T-L
T50T-Q
T62T-Q
T75T-X
T100T-X
Material
Color
Natural
Natural
Natural
Fire
Black
Resistant
Natural
Polyethylene
Natural
UL94V-2
Natural
Natural
Natural
Natural
Black
Natural
Black
Natural
Black
Flame
Natural
Black
Retardant
Polyethylene Natural
Black
UL94V-0
Natural
Black
Natural
Black
Natural
Black
Natural
Black
Natural
Black
Natural
Black
Nylon (Black Natural
is Weather
Black
Natural
Resistant
Nylon)
Black
Natural
Black
Natural
Black
Natural
Black
Natural
Natural
Natural
TEFLON‡ Natural
Natural
Natural
Natural
A
Outside Dia.
in. (mm)
B
in. (mm)
T
in. (mm)
Bundle Size
in. (mm)
Std.
Pkg.
Qty.*
Ft. (m)
.125 (3.2)
.188 (4.8)
.25 (6.4)
.25 (6.4)
.375 (9.5)
.50 (12.7)
.625 (15.9)
.75 (19.1)
1.00 (25.4)
.125 (3.2)
.125 (3.2)
.188 (4.8)
.188 (4.8)
.25 (6.4)
.25 (6.4)
.375 (9.5)
.375 (9.5)
.50 (12.7)
.50 (12.7)
.625 (15.9)
.625 (15.9)
.75 (19.1)
.75 (19.1)
1.00 (25.4)
1.00 (25.4)
.125 (3.2)
.125 (3.2)
.188 (4.8)
.188 (4.8)
.25 (6.4)
.25 (6.4)
.375 (9.5)
.375 (9.5)
.50 (12.7)
.50 (12.7)
.625 (15.9)
.625 (15.9)
.75 (19.1)
.75 (19.1)
1.00 (25.4)
1.00 (25.4)
.125 (3.2)
.188 (4.8)
.25 (6.4)
.50 (12.7)
.625 (15.9)
.75 (19.1)
1.00 (25.4)
.218 (5.5)
.250 (6.4)
.375 (9.5)
.375 (9.5)
.437 (11.1)
.50 (12.7)
.625 (15.9)
.875 (22.2)
1.125 (28.6)
.218 (5.5)
.218 (5.5)
.250 (6.4)
.250 (6.4)
.375 (9.5)
.375 (9.5)
.437 (11.1)
.437 (11.1)
.50 (12.7)
.50 (12.7)
.625 (15.9)
.625 (15.9)
.875 (22.2)
.875 (22.2)
1.125 (28.6)
1.125 (28.6)
.218 (5.5)
.218 (5.5)
.250 (6.4)
.250 (6.4)
.375 (9.5)
.375 (9.5)
.437 (11.1)
.437 (11.1)
.50 (12.7)
.50 (12.7)
.625 (15.9)
.625 (15.9)
.875 (22.2)
.875 (22.2)
1.125 (28.6)
1.125 (28.6)
.218 (5.5)
.250 (6.4)
.375 (9.5)
.50 (12.7)
.625 (15.9)
.875 (22.2)
1.125 (28.6)
.03 (.76)
.035 (.89)
.04 (1.02)
.04 (1.02)
.055 (1.4)
.06 (1.5)
.062 (1.57)
.065 (1.65)
.07 (1.78)
.03 (.76)
.03 (.76)
.032 (.81)
.032 (.81)
.04 (1.02)
.04 (1.02)
.055 (1.4)
.055 (1.4)
.06 (1.5)
.06 (1.5)
.062 (1.57)
.062 (1.57)
.065 (1.65)
.065 (1.65)
.07 (1.78)
.07 (1.78)
.015 (.38)
.015 (.38)
.020 (.51)
.020 (.51)
.023 (.58)
.023 (.58)
.03 (.76)
.03 (.76)
.032 (.81)
.032 (.81)
.035 (.89)
.03 (.89)
.04 (1.02)
.04 (1.02)
.045 (1.1)
.045 (1.1)
.02 (.5)
.03 (.76)
.03 (.76)
.03 (.76)
.03 (.76)
.03 (.76)
.04 (1.02)
.064 (1.6) – .50 (12.7)
.125 (3.2) – 1.00 (25.4)
.188 (4.8) – 2.00 (50.8)
.188 (4.8) – 2.00 (50.8)
.316 (7.9) – 3.00 (76.2)
.375 (9.5) – 4.00 (101.6)
.50 (12.7) – 4.50 (114.3)
.625 (15.9) – 5.00 (127.0)
.875 (22.2) – 6.00 (152.4)
.064 (1.6) – .50 (12.7)
.064 (1.6) – .50 (12.7)
.125 (3.2) – 1.00 (25.4)
.125 (3.2) – 1.00 (25.4)
.188 (4.8) – 2.00 (50.8)
.188 (4.8) – 2.00 (50.8)
.316 (7.9) – 3.00 (76.2)
.316 (7.9) – 3.00 (76.2)
.375 (9.5) – 4.00 (101.6)
.375 (9.5) – 4.00 (101.6)
.50 (12.7) – 4.50 (114.3)
.50 (12.7) – 4.50 (114.3)
.625 (15.9) – 5.00 (127.0)
.625 (15.9) – 5.00 (127.0)
.875 (22.2) – 6.00 (152.4)
.875 (22.2) – 6.00 (152.4)
.064 (1.6) – .50 (12.7)
.064 (1.6) – .50 (12.7)
.125 (3.2) – 1.00 (25.4)
.125 (3.2) – 1.00 (25.4)
.188 (4.8) – 2.00 (50.8)
.188 (4.8) – 2.00 (50.8)
.316 (7.9) – 3.00 (76.2)
.316 (7.9) – 3.00 (76.2)
.375 (9.5) – 4.00 (101.6)
.375 (9.5) – 4.00 (101.6)
.50 (12.7) – 4.50 (114.3)
.50 (12.7) – 4.50 (114.3)
.625 (15.9) – 5.00 (127.0)
.625 (15.9) – 5.00 (127.0)
.875 (22.2) – 6.00 (152.4)
.875 (22.2) – 6.00 (152.4)
.064 (1.6) – .50 (12.7)
.125 (3.2) – 1.00 (25.4)
.188 (4.8) – 2.00 (50.8)
.375 (9.5) – 4.00 (101.6)
.50 (12.7) – 4.50 (114.3)
.625 (15.9) – 5.00 (127.0)
.875 (22.2) – 6.00 (152.4)
100 (30.5)
100 (30.5)
100 (30.5)
100 (30.5)
100 (30.5)
100 (30.5)
100 (30.5)
100 (30.5)
100 (30.5)
100 (30.5)
100 (30.5)
100 (30.5)
100 (30.5)
100 (30.5)
100 (30.5)
100 (30.5)
100 (30.5)
100 (30.5)
100 (30.5)
100 (30.5)
100 (30.5)
100 (30.5)
100 (30.5)
100 (30.5)
100 (30.5)
100 (30.5)
100 (30.5)
100 (30.5)
100 (30.5)
100 (30.5)
100 (30.5)
100 (30.5)
100 (30.5)
100 (30.5)
100 (30.5)
100 (30.5)
100 (30.5)
100 (30.5)
100 (30.5)
100 (30.5)
100 (30.5)
100 (30.5)
100 (30.5)
50 (15.2)
25 (7.6)
25 (7.6)
10 (3.0)
10 (3.0)
*Order in multiples of std. pkg. qty.
‡TEFLON or equivalent fluorocarbon PTFE material is used. TEFLON is a registered trademark of E.I. DuPont de Nemours Co.
Note: Custom cut-to-length sizes are available upon request. Contact PANDUIT ® Technical Assistance 866-405-6657 for details.
Most commonly used parts appear in BOLD.
167
Split Harness Wrap
PAN -WRAP ™ Split Harness Wrap
PAN -WRAP ™ Split Harness Wrap is an innovative addition to the
PANDUIT ® Abrasion Protection Line. Engineered for wire harness
protection, PAN-WRAP ™ bundles and protects wire, cable and hoses.
The PAN -WRAP ™ design provides full 360° coverage with pre-cut slots
for break-outs to maximize reliability and reduce installation time.
PAN -WRAP ™ tools are available for easy installation.
Features and Benefits
• Slotted walls allow wire break-outs to speed installation
• Flexible design allows maneuverability and protects wire and cables during movement
• New installation tool reduces installation time and lowers installed cost
• 360° abrasion protection improves product reliability
Applications
• Wire Harness Assemblers
• Transportation
Open PAN-W RAP ™ Tool to
enable the wire bundle to be
inserted inside the tool.
• Commercial Appliances
• Industrial Robotics
Insert wire bundle inside tool.
Close tool to secure the wire
bundle and prepare to insert
bundle into the PAN-WRAP ™
Split Harness Wrap.
Insert end of tool into the end
of Split Harness Wrap. Begin
pulling the tool making
certain that the Split Harness
Wrap is feeding over the
wire bundle.
Hold end of Split Harness
Wrap and wire bundle while
continuing to pull the tool,
inserting the wire bundle into
the length of the Split
Harness Wrap.
Split Harness Wrap
Part
Number
PW50F-T
PW75F-C
PW50F-T20
PW75F-C20
Size
I.D.
In. (mm)
Maximum
Bundle
Diameter
In. (mm)
Material
.50 (12.7)
.75 (19.05)
.50 (12.7)
.75 (19.05)
.55 (13.97)
.80 (20.32)
.55 (13.97)
.80 (20.32)
Polyethylene
Polyethylene
Polyethylene
Polyethylene
Color
Length
Ft. (M)
Std.
Pkg.
Qty.*
Natural
Natural
Black
Black
200 (61.05)
100 (30.48)
200 (61.05)
100 (30.48)
1
1
1
1
Tool
Part
Number
Material
Color
Size
Std.
Pkg.
Qty.*
PWT50
PWT75
ABS
ABS
White
White
.50"
.75"
1
1
168
Most commonly used parts appear in BOLD.
*Order in multiples of std. pkg. qty.
Grommet Edging
Features:
Suggested Applications:
• Nylon grommet edging strips conform
to the Military Standard MS21266
• Slotted or solid wall construction
• Available with pressure
sensitive adhesive
• No liner to remove from adhesive
• Use the solid wall product on
straight edges
• Use to prevent abrasion against
the sharp edges of panel walls
and knockouts
The Functional Part Number System Makes Ordering Easy
Grommet Edging Part Number Description
Example:
Part Description
Grommet Edging
Strips = GE
Slotted Grommet
Edging = GEE
Max. Panel Thickness
36 = .036" thickness
62 = .062" thickness
99 = .099" thickness
144 = .144" thickness
189 = .189" thickness
GEE
36 F -A- C 0
Material
F = Polyethylene
N = Nylon 6.6
FR = Flame Retardant
Polyethylene
Adhesive
A = Adhesive
Lined
Leave Blank =
Non-Adhesive
Package Size
Q = 25'
L = 50'
C = 100'
Color Suffix
0 = Weather
Resistant Black
Leave Blank = Natural
Solid Grommet
Edging = GES
Most commonly used parts appear in BOLD.
169
Grommet Edging
Protects wires and cables from sharp edges
Choose from five materials:
Nylon 6.6
• Self extinguishing
• For indoor use up to 149°F (65°C)
• Available with slotted wall only‘
Polyethylene
• General purpose material for indoor use up to 122°F (50°C)
• Style GEE and GES provided in .030" (0.8mm) thick material,
makes them highly flexible
• Available with slotted or solid wall construction
Weather Resistant Polyethylene
• For outdoor use up to 122°F (50°C)
• Excellent resistance to ultra-violet light
Flame Retardant Polyethylene
• Will not support a flame
• Available with slotted or solid wall construction
Adhesive Lined Polyethylene
• Base is lined with a pressure sensitive adhesive
• Available in natural and weather resistant
• Adhesive ensures that the product will stay where it is installed
Adhesive Lined
170
Most commonly used parts appear in BOLD.
Grommet Edging
Dimensions —in. (mm)
Part Number
Material
GEE36F-C
GEE36F-C0
GEE62F-C
GEE62F-C0
GEE99F-C
GEE99F-C0
GEE144F-C
GEE144F-C0
GES36F-C
GES36F-C0
GES62F-C
GES62F-C0
GES99F-C
GES99F-C0
GES144F-C
GES144F-C0
GES189F-C
GES189F-C0
GEE62F-A-C
GEE62F-A-C0
GEE99F-A-C
GEE99F-A-C0
GEE144F-A-C
GEE144F-A-C0
GES62F-A-C
GES62F-A-C0
GES99F-A-C
GES99F-A-C0
GES144F-A-C
GES144F-A-C0
GEE36FR-C
GEE62FR-C
GEE99FR-C
GEE144FR-C
Continuous
Polyethylene
(Slotted
Wall)
Continuous
Polyethylene
(Solid Wall)
Continuous
Polyethylene
With
Adhesive
(Slotted
Wall)
Continuous
Polyethylene
With
Adhesive
(Solid Wall)
Flame
Retardant
Polyethylene
(Slotted
Wall)
GES36FR-C
Flame
GES62FR-C
Retardant
Polyethylene
GES99FR-C
GES144FR-C (Solid Wall)
GEE47N-C
Continuous
GEE55N-C
Nylon 6.6
GEE71N-C
(Slotted
GEE98N-C
Wall)
GEE134N-C
Std.
Pkg.
Qty.*
Polyethylene
Color
Panel Thickness
in. (mm)
A
B
Ft. (m)
Per Roll
Natural
Black
Natural
Black
Natural
Black
Natural
Black
Natural
Black
Natural
Black
Natural
Black
Natural
Black
Natural
Black
Natural
Black
Natural
Black
Natural
Black
Natural
Black
Natural
Black
Natural
Black
Natural
Natural
Natural
Natural
.026 (.7) – .036 (.9)
.026 (.7) – .036 (.9)
.036 (.9) – .062 (1.6)
.036 (.9) – .062 (1.6)
.062 (1.6) – .099 (2.5)
.062 (1.6) – .099 (2.5)
.099 (2.5) – .144 (3.7)
.099 (2.5) – .144 (3.7)
.026 (.7) – .036 (.9)
.026 (.7) – .036 (.9)
.036 (.9) – .062 (1.6)
.036 (.9) – .062 (1.6)
.062 (1.6) – .099 (2.5)
.062 (1.6) – .099 (2.5)
.099 (2.5) – .144 (3.7)
.099 (2.5) – .144 (3.7)
.144 (3.7) – .189 (4.8)
.144 (3.7) – .189 (4.8)
036 (.9) – .062 (1.6)
.036 (.9) – .062 (1.6)
.062 (1.6) – .099 (2.5)
.062 (1.6) – .099 (2.5)
.099 (2.5) – .144 (3.7)
.099 (2.5) – .144 (3.7)
036 (.9) – .062 (1.6)
.036 (.9) – .062 (1.6)
.062 (1.6) – .099 (2.5)
.062 (1.6) – .099 (2.5)
.099 (2.5) – .144 (3.7)
.099 (2.5) – .144 (3.7)
.026 (.7) – .036 (.9)
.036 (.9) – .062 (1.6)
.062 (1.6) – .099 (2.5)
.099 (2.5) – .144 (3.7)
.106 (2.7)
.106 (2.7)
.131 (3.3)
.131 (3.3)
.169 (4.3)
.169 (4.3)
.213 (5.4)
.213 (5.4)
.106 (2.7)
.106 (2.7)
.131 (3.3)
.131 (3.3)
.169 (4.3)
.169 (4.3)
.213 (5.4)
.213 (5.4)
.297 (7.6)
.297 (7.6)
.131 (3.3)
.131 (3.3)
.169 (4.3)
.169 (4.3)
.213 (5.4)
.213 (5.4)
.131 (3.3)
.131 (3.3)
.169 (4.3)
.169 (4.3)
.213 (5.4)
.213 (5.4)
.106 (2.7)
.131 (3.3)
.169 (4.3)
.213 (5.4)
.117 (3.0)
.117 (3.0)
.160 (4.1)
.160 (4.1)
.186 (4.7)
.186 (4.7)
.222 (5.6)
.222 (5.6)
.117 (3.0)
.117 (3.0)
.160 (4.1)
.160 (4.1)
.186 (4.7)
.186 (4.7)
.222 (5.6)
.222 (5.6)
.301 (7.7)
.301 (7.7)
.160 (4.1)
.160 (4.1)
.186 (4.7)
.186 (4.7)
.222 (5.6)
.222 (5.6)
.160 (4.1)
.160 (4.1)
.186 (4.7)
.186 (4.7)
.222 (5.6)
.222 (5.6)
.117 (3.0)
.160 (4.1)
.155 (3.9)
.232 (5.9)
100 (30.5)
100 (30.5)
100 (30.5)
100 (30.5)
100 (30.5)
100 (30.5)
100 (30.5)
100 (30.5)
100 (30.5)
100 (30.5)
100 (30.5)
100 (30.5)
100 (30.5)
100 (30.5)
100 (30.5)
100 (30.5)
100 (30.5)
100 (30.5)
100 (30.5)
100 (30.5)
100 (30.5)
100 (30.5)
100 (30.5)
100 (30.5)
100 (30.5)
100 (30.5)
100 (30.5)
100 (30.5)
100 (30.5)
100 (30.5)
100 (30.5)
100 (30.5)
100 (30.5)
100 (30.5)
1 Roll B
1 Roll
A
1 Roll
Style GEE
1 Roll
Slotted Wall
1 Roll
Continuous
1 Roll
(100') Rolls
1 Roll
1 Roll
Polyethylene
1 Roll
1 Roll
1 Roll
1 Roll B
1 Roll
A
1 Roll
Style
GES
1 Roll
Solid Wall
1 Roll
Continuous
1 Roll
(100') Rolls
1 Roll
1 Roll Adhesive Lined
1 Roll Polyethylene
1 Roll
1 Roll
1 Roll
1 Roll B
1 Roll
A
1 Roll
Style GEE-A
1 Roll
Slotted Wall
1 Roll
Continuous
1 Roll
(100') Rolls
1 Roll
1 Roll
1 Roll Adhesive Lined
1 Roll Polyethylene
1 Roll
Natural
Natural
Natural
Natural
Natural
Natural
Natural
Natural
Natural
.026 (.7) – .036 (.9)
.036 (.9) – .062 (1.6)
.062 (1.6) – .099 (2.5)
.099 (2.5) – .144 (3.7)
.039 (1.0) – .055 (1.4)
.047 (1.2) – .063 (1.6)
.063 (1.6) – .079 (2.0)
.091 (2.3) – .106 (2.7)
.126 (3.2) – .142 (3.6)
.106 (2.7)
.131 (3.3)
.169 (4.3)
.213 (5.4)
.130 (3.3)
.133 (3.4)
.150 (3.8)
.180 (4.6)
.210 (5.3)
.117 (3.0)
.160 (4.1)
.155 (3.9)
.232 (5.9)
.140 (3.5)
.140 (3.5)
.140 (3.5)
.140 (3.5)
.140 (3.5)
100 (30.5)
100 (30.5)
100 (30.5)
100 (30.5)
100 (30.5)
100 (30.5)
100 (30.5)
100 (30.5)
100 (30.5)
1 Roll
1 Roll
1 Roll
1 Roll
1 Roll
1 Roll
1 Roll
1 Roll
1 Roll
B
A
Style GES-A
Solid Wall
Continuous
(100') Rolls
Nylon 6.6
*Order the number of reels required in multiples of standard package quantities.
B
A
Dimensions —in. (mm)
Part Number
Material
GE52-C
GE52-C69
GE85-C
GE85-C69
GE128-C
GE128-C69
GE192-L
GE192-L69
GE255-L
GE318-L
GE380-Q
GE510-Q
Military
Standard
MS21266
12.75
(323.85mm)
Nylon 6.6
Strips -69
designates
Flame
Retardant)
Color
Panel Thickness
in. (mm)
B
Pieces
Per
Pkg.
Std.
Pkg.
Qty.*
.155 (3.9)
.155 (3.9)
.155 (3.9)
.155 (3.9)
.155 (3.9)
.155 (3.9)
.230 (5.8)
.230 (5.8)
.240 (6.1)
.255 (6.5)
.255 (6.5)
.255 (6.5)
100
100
100
100
100
100
50
50
50
50
25
25
Strips
Strips
Strips
Strips
Strips
Strips
Strips
Strips
Strips
Strips
Strips
Strips
A
Natural .015 (.4) – .052 (1.3)
.150 (3.8)
Natural .015 (.4) – .052 (1.3)
.150 (3.8)
Natural .052 (1.3) – .085 (2.2) .175 (4.5)
Natural .05 (1.3) – .085 (2.2)
.175 (4.5)
Natural .085 (2.2) – .128 (3.3) .220 (5.6)
Natural .085 (2.2) – .128 (3.3) .220 (5.6)
Natural .128 (3.3) – .192 (4.9) .325 (8.3)
Natural .128 (3.3) – .192 (4.9) .325 (8.3)
Natural .192 (4.9) – .255 (6.5) .385 (9.8)
Natural .255 (6.5) – .318 (8.1) .455 (11.3)
Natural .318 (8.1) – .380 (9.7) .515 (13.1)
Natural .380 (9.7) – .510 (13.0) .640 (16.3)
*Order the number of pieces required in multiples of standard package quantities.
This material is not listed under military standard MS21266.
Grommet edging is to be used for odd shaped holes in addition to circular panel holes. Circular hole installation cut lengths
can be found by: cut lengths = (dia. of hole) x 3.14.
Continuous
(100') Rolls
Style GEE
Slotted Wall
Nylon 6.6
B
A
Style GE
Slotted Wall
12 3/4" strips
Most commonly used parts appear in BOLD.
171
Corrugated Loom Tubing
• PANDUIT ® Corrugated Loom Tubing is offered for
applications where spiral wrap or braided expandable
sleeving may be difficult to install or where they do not
offer the amount of protection required
• Available in Heat Stabilized Nylon or Polyethylene, this
product features a lengthwise slit which makes it easy
to install onto a bundle of wires or a pre-assembled
harness assembly
Features and Benefits
• Protects and reduces the risk of damage to wiring
• Crush, impact and abrasion resistant
• Slit wall design for ease of installation
• Available in easy to handle 100' lengths
• Available in black, orange and yellow polyethylene and
black heat stabilized nylon
• Secure with push type cable ties, adhesive or push
type mounts
Suggested Applications
• Bundle wires in control panels
• Contain and organize loose and bundled
wiring harnesses
• Route wires in automotive, truck, trailer, bus,
conversion van, emergency service and recreational
vehicle applications
• Protect wires in off road/mobile equipment
• Use in mining equipment
• Marine applications for protecting wires on boats
and ships
Wiring Accessories for Corrugated Loom Tubing
• Tie Harness Mounts have a specially designed
location tab on the mount that aligns with grooves in
corrugated loom tubing to ensure proper mount location
during assembly
172
Most commonly used parts appear in BOLD.
Corrugated Loom Tubing
The Functional Part Number System Makes Ordering Easy
Corrugated Loom Tubing Part Number Description
Example: CLT
Bundle Diameter
25 = 1/4"
35 = 5/16"
38 = 3/8"
50 = 1/2"
62 = 5/8"
75 = 3/4"
100 = 1"
125 = 1 1/4"
150 = 1 1/2"
188 = 1 7/8"
Part Description
Corrugated Loom
Tubing
CLT= Slit Wall
CLTS= Solid Wall
Material
N = Heat Stabilized Nylon
F = Polyethylene
Part Number
Slit
CLT25F-C20
CLT35F-C20
CLT38F-C20
CLT50F-C20
CLT62F-C20
CLT75F-C20
CLT100F-C20
CLT125F-L20
CLT150F-X20
CLT150F-T20
CLT150F-D20
CLT188F-X20
CLT188F-C20
CLT188F-6C20
CLT25F-C3
CLT35F-C3
CLT38F-C3
CLT50F-C3
CLT62F-C3
CLT75F-C3
CLT100F-C3
CLT125F-L3
CLT150F-X3
CLT150F-D3
CLT188F-X3
CLT188F-C3
CLT150F-X4
CLT150F-D4
CLT188F-X4
CLT188F-C4
CLT25N-C630
CLT35N-C630
CLT38N-C630
CLT50N-C630
CLT62N-C630
CLT75N-C630
CLT100N-C630
CLT125N-L630
CLT150N-D630
CLT188N-6C630
Solid
CLTS25F-C
CLTS35F-C
CLTS38F-C
CLTS50F-C
CLTS62F-C
CLTS75F-C
CLTS100F-C
CLTS125F-L
**
**
CLTS150F-D
**
**
**
CLTS25F-C3
CLTS35F-C3
CLTS38F-C3
CLTS50F-C3
CLTS62F-C3
CLTS75F-C3
CLTS100F-C3
CLTS125F-L3
**
CLTS150F-D3
**
**
**
**
**
**
CLTS25N-C
CLTS35N-C
CLTS38N-C
CLTS50N-C
CLTS62N-C
CLTS75N-C
CLTS100N-C
CLTS125N-L
**
**
100 N -C 630
Material
Color
Polyethylene
Black
Polyethylene
Orange
Polyethylene
Yellow
Heat Stabilized
Black Nylon 6
Black
Color Suffix
630 = Heat Stabilized
Black Nylon 6
20 = Black Polyethylene
3= Orange
4= Yellow
Package Size
X = 10'
L = 50'
C = 100'
T = 200'
D = 500'
6C = 600’
Inside
Diameter
in. (mm)
Outside
Diameter
in. (mm)
.265 (6.7)
.350 (8.9)
.414 (10.5)
.505 (12.8)
.665 (16.9)
.760 (19.3)
.915 (23.2)
1.290 (32.8)
1.550 (39.1)
1.550 (39.1)
1.550 (39.1)
1.881 (47.8)
1.881 (47.8)
1.881 (47.8)
.265 (6.7)
.350 (8.9)
.414 (10.5)
.505 (12.8)
.665 (16.9)
.760 (19.3)
.915 (23.2)
1.290 (32.8)
1.550 (39.1)
1.550 (39.1)
1.881 (47.8)
1.881 (47.8)
1.550 (39.1)
1.550 (39.1)
1.881 (47.8)
1.881 (47.8)
.265 (6.7)
.350 (8.9)
.414 (10.5)
.505 (12.8)
.665 (16.9)
.760 (19.3)
.915 (23.2)
1.290 (32.8)
1.550 (39.1)
1.881 (47.8)
.390 (9.9)
.500 (12.7)
.556 (14.1)
.670 (17.0)
.830 (21.1)
.935 (23.7)
1.090 (27.7)
1.500 (38.1)
1.860 (47.2)
1.860 (47.2)
1.860 (47.2)
2.169 (55.1)
2.169 (55.1)
2.169 (55.1)
.390 (9.9)
.500 (12.7)
.556 (14.1)
.670 (17.0)
.830 (21.1)
.935 (23.7)
1.090 (27.7)
1.500 (38.1)
1.860 (47.2)
1.860 (47.2)
2.169 (55.1)
2.169 (55.1)
1.860 (47.2)
1.860 (47.2)
2.169 (55.1)
2.169 (55.1)
.390 (9.9)
.500 (12.7)
.556 (14.1)
.670 (17.0)
.830 (21.1)
.935 (23.7)
1.090 (27.7)
1.500 (38.1)
1.860 (47.2)
2.169 (55.1)
*Order number of rolls required.
**Contact PANDUIT ® Technical Assistance 866-405-6657 for additional sizes, materials, colors, and bulk packaging.
NOTE: Custom cut-to-length sizes are available upon request. Contact PANDUIT ® Technical Assistance 866-405-6657 for details.
Length
Ft. (m)
Std.
Pkg.
Qty.*
100 (30.5)
100 (30.5)
100 (30.5)
100 (30.5)
100 (30.5)
100 (30.5)
100 (30.5)
1 Roll
50 (15.2)
10 (3.0)
200 (61.0)
500 (152.4)
10 (3.0)
100 (30.5)
600 (182.9)
100 (30.5)
100 (30.5)
100 (30.5)
100 (30.5)
100 (30.5)
100 (30.5)
1 Roll
100 (30.5)
50 (15.2)
10 (3.0)
500 (152.4)
10 (3.0)
100 (30.5)
10 (3.0)
500 (152.4)
1 Roll
10 (3.0)
100 (30.5)
100 (30.5)
100 (30.5)
100 (30.5)
100 (30.5)
100 (30.5)
1 Roll
100 (30.5)
100 (30.5)
50 (15.2)
500 (152.4)
600 (182.9)
Most commonly used parts appear in BOLD.
173
Corrugated Loom Tubing Fittings
Features:
Benefits:
•
•
•
•
•
•
Reduces production time
Improves system appearance
Reduces operator fatigue
Secures fittings firmly in place
Protects wires
Provides easy selection of
fittings for application needs
Fast assembly . . . . . . . . . . . . . . . . .
Virtually eliminates taping . . . . . . . .
Easy to assemble . . . . . . . . . . . . . .
Locking latch design . . . . . . . . . . . .
Durable polyethylene shell. . . . . . . .
Works with most popular sizes . . . .
of Corrugated Loom Tubing
C
D
B
A
Dimensions
in. (mm)
Part Number
CF382538F-Q
CF502550F-Q
CF503850F-Q
A
.38
(9.53)
.50
(12.70)
CF752575F-Q
CF753875F-Q
174
.75
(19.05)
B
.25
(6.35)
.38
(9.53)
.25
(6.35)
.38
(9.53)
Packaging*
C
.38
(9.53)
D
2.06
(52.32)
.50
(12.70)
2.30
(58.42)
.75
(19.05)
3.06
(77.72)
Material
Color
Std.
Pkg
Qty.
Polyethylene
Black
25
Std.
Ctn.
Qty.
100
*Order the number of pieces required in multiplies of package quantities.
Most commonly used parts appear in BOLD.
Braided Expandable Sleeving
Braided Expandable Sleeving — Polyethylene Terephthalate — PET
• Provides continuous abrasion resistance for wires,
cables and tubing
• Lightweight, durable protection
• Highly flexible open weave will not trap heat or humidity
• Rated for use up to 257°F (125°C)
• Allows for use with irregular shapes
• Stock colors: Black, gray and white
• See page 176 for cutting tools
The Functional Part Number System Makes Ordering Easy
Braided Expandable Sleeving Part Number Description
Example: SE 25 PFR - M R 0
Nom. I.D. Size
Material
12 = 1/8" (3.2)
P = Polyethylene Terephthalate (PET)
25 = 1/4" (6.4)
PFR = Polyethylene Terephthalate (PET)
38 = 3/8" (9.5)
Flame Retardant
50 = 1/2" (12.7)
75 = 3/4" (19.1)
125 = 1 1/ 4" (31.8)
Part Description
SE = Sleeving
Expandable
Package Size
R = Reel
L = 50' (15.2m)
C = 100' (30.5m)
T = 200' (61.0m)
D = 500' (152.4m)
M = 1000' (304.8m)
Color Suffix
0 = Black
8 = Gray
10 = White
150 = 1 1/ 2" (38.1)
175 = 1 3/ 4" (44.5)
Part Number
Black
Part Number
Gray
Part Number
White
SE12P-TR0
SE12P-MR0
SE25P-TR0
SE25P-MR0
SE38P-TR0
SE38P-MR0
SE50P-CR0
SE50P-DR0
SE75P-CR0
SE75P-DR0
SE125P-LR0
SE125P-TR0
SE150P-LR0
SE150P-TR0
SE175P-TR0
SE12P-TR8
SE12P-MR8
SE25P-TR8
SE25P-MR8
SE38P-TR8
SE38P-MR8
SE50P-CR8
SE50P-DR8
SE75P-CR8
SE75P-DR8
SE125P-LR8
SE125P-TR8
SE150P-LR8
SE150P-TR8
—
—
SE12P-MR10
—
SE25P-MR10
—
SE38P-MR10
—
SE50P-DR10
—
SE75P-DR10
—
SE125P-TR10
—
SE150P-TR10
—
Nominal
I.D.
in.
Nominal
Diameter Range
in. (mm)
1/8
.094 to .250
(2.4) to (6.4)
.125 to .375
(3.2) to (9.5)
.188 to .562
(4.7) to (14.3)
.250 to .750
(6.4) to (19.1)
.500 to 1.25
(12.7) to (31.8)
.750 to 1.50
(19.1) to (38.1)
1.00 to 2.25
(25.4) to (57.2)
1.25 to 2.75
(31.8) to (69.8)
1/4
3/8
1/2
3/4
1 1/4
1 1/2
1 3/4
Std.
Pkg.
Qty.*
Feet (m)
Std.
Ctn.
Qty.
200 (61.0)
1000 (304.8)
200 (61.0)
1000 (304.8)
200 (61.0)
1000 (304.8)
100 (30.5)
500 (152.4)
100 (30.5)
500 (152.4)
50 (15.2)
200 (61.0)
50 (15.2)
200 (61.0)
200 (61.0)
4 Reels
2 Reels
4 Reels
2 Reels
4 Reels
2 Reels
4 Reels
2 Reels
4 Reels
2 Reels
4 Reels
2 Reels
4 Reels
2 Reels
2 Reels
*Order number of reels required.
Most commonly used parts appear in BOLD.
175
Flame Retardant Braided Expandable Sleeving
Braided Expandable Sleeving —
Flame Retardant Polyethylene Terephthalate — PET
• Provides continuous abrasion resistance for wires, cables
and tubing
• Lightweight, durable protection
• Highly flexible open weave will not trap heat or humidity
• Rated for use up to 257°F (125°C)
• Allows for use with irregular shapes
• Self extinguishing, meets UL VW-1
• Stock colors: Black or gray with white tracer, or in white with
black tracer to identify flame retardant material
• See bottom of this page for cutting tools
Flame Retardant
Part Number
Black
Part Number
Gray
Part Number
White
SE12PFR-TR0
SE12PFR-MR0
SE25PFR-TR0
SE25PFR-MR0
SE38PFR-TR0
SE38PFR-MR0
SE50PFR-CR0
SE50PFR-DR0
SE75PFR-CR0
SE75PFR-DR0
SE125PFR-LR0
SE125PFR-TR0
SE150PFR-LR0
SE150PFR-TR0
SE175PFR-TR0
SE12PFR-TR8
SE12PFR-MR8
SE25PFR-TR8
SE25PFR-MR8
SE38PFR-TR8
SE38PFR-MR8
SE50PFR-CR8
SE50PFR-DR8
SE75PFR-CR8
SE75PFR-DR8
SE125PFR-LR8
SE125PFR-TR8
SE150PFR-LR8
SE150PFR-TR8
—
—
SE12PFR-MR10
—
SE25PFR-MR10
—
SE38PFR-MR10
—
SE50PFR-DR10
—
SE75PFR-DR10
—
SE125PFR-TR10
—
SE150PFR-TR10
—
Nominal
I.D.
in. (mm)
Nominal
Diameter Range
in. (mm)
1/8
.094 to .250
(2.4) to (6.4)
.125 to .375
(3.2) to (9.5)
.188 to .625
(4.7) to (15.9)
.250 to .750
(6.4) to (19.1)
.500 to 1.25
(12.7) to (31.8)
.750 to 1.50
(19.1) to (38.1)
1.00 to 2.25
(25.4) to (57.2)
1.25 to 2.75
(31.8) to (69.8)
1/4
3/8
1/2
3/4
1 1/4
1 1/2
1 3/4
Std.
Pkg.
Qty.
Feet (m)
Std.
Ctn.
Qty.
200 (61.0)
1000 (304.8)
200 (61.0)
1000 (304.8)
200 (61.0)
1000 (304.8)
100 (30.5)
500 (152.4)
100 (30.5)
500 (152.4)
50 (15.2)
200 (61.0)
50 (15.2)
200 (61.0)
200 (61.0)
4 Reels
2 Reels
4 Reels
2 Reels
4 Reels
2 Reels
4 Reels
2 Reels
4 Reels
2 Reels
4 Reels
2 Reels
4 Reels
2 Reels
2 Reels
*Order number of reels required.
Bench Mount Cutter/
End Sealer
Tooling Head (HKBS)
Sleeving Cutter/End Sealer Blade —
Used with popular soldering guns to cut and seal sleeving.
Part Number
HKBS
Description
For dual straight shank soldering guns with .500" spacing
Typical Guns: WELLER straight shank Model 8200; WEN
Model 199 or 100
*Order number of blades required.
176
Most commonly used parts appear in BOLD.
Available Directly from
Manufacturer
Std.
Pkg.
Qty*
1
Pearson Industries
P.O. Box 36
Prattville, AL 36067
(334) 365-5416
Flammability Tests and Classifications
Abrasion Protection Products Flammability Tests and Classifications
• A number of test procedures have been developed which can be
used for the evaluation and comparison of various materials to
support combustion
• Review the following classifications to find which category is
designed to suit your abrasion and protection applications
UL94 VERTICAL BURNING TEST
Test samples of material, with dimension 125 ± 5mm by 13.0 ± 5mm and provided in the minimum and
maximum thickness of the intended end use product, are tested in an unconditioned (as manufactured)
state and in a conditioned state (7 days at 168F°, 75°C). The test requires the placement of a precisely
controlled flame under a vertically supported specimen for a 10 second period. The flame is removed and
the duration of flaming is recorded. If the flame extinguishes, the specimen is immediately subjected to a
second 10 second ignition period. Duration of flaming is again recorded. A piece of 100% cotton is placed
under the specimen. Also observed and documented is if the sample drips flaming particles that ignite the
cotton indicator below.
Materials Classification
Criteria Conditions
V-0
V-1
V-2
Afterflame time for each individual specimen t1 or t2
d10s
d30s
d30s
Total afterflame time for any condition set (t1 plus t2 for the
5 specimens)
Afterflame plus afterglow time for each individual specimen
after the second flame application (t2+t 3)
d50s
d250s
d250s
d30s
d60s
d60s
No
No
No
No
No
Yes
Afterflame or afterglow of any specimen up to the
holding clamp
Cotton indicator ignited by flaming particles or drops
t1
Afterflame time after first flame application
t2
Afterflame time after flame application
t3
Afterglow time after second flame application
MATERIALS CLASSIFIED UL-94 HB
• Specimens shall have a maximum burn rate of <1.5"/min over 3" of thickness of 0.120" to 0.5"
• Specimens shall have a maximum burn rate of <3.0"/min over 3" for a thickness less than 0.120"
UL224 VERTICAL WIRE FLAME TEST
Samples of fully recovered tubing are placed over a length of fine spring steel music wire. The test
requires the precise placement of a controlled flame that contacts the heat shrink tubing. The flame is
applied in five fifteen second intervals with a time period between applications. If the flame extinguishes
immediately after the first flame removal, subsequent flame applications are made to the tubing. Duration
of specimen flaming is noted. A piece of surgical cotton is placed under the specimen. If a flaming or
glowing piece of tubing drips and ignites the cotton, this is also noted.
MATERIALS CLASSIFIED AS VW-1 SHALL:
• Not flame or glow longer than 60 seconds following any of the five applications of the flame
• Not ignite or damage more than 25% of kraft paper flag that is placed around the top of the tubing
• Not have any specimens which drip flaming particles and ignite the surgical cotton located 9 1/2" below
the test specimen.
Most commonly used parts appear in BOLD.
177
Abrasion Protection Materials Technical Data
.91.93
1400
(D638)
.01%
HB
239°F
(115°C)
20 mg
.931.09
2000
(D638)
.03%
V-2
239°F
(115°C)
27 mg
1.001.30
1400
(D638)
.02%
UL94
V-0
270°F
(132°C)
22 mg
1.15
1,500
(D638)
.02%
UL94
V-2
505°F
(263°C)
7 mg
1.131.15
12,400
(D638)
UL94
V-2
505°F
(263°C)
7 mg
1.131.15
UL94
V-0
648°F
(342°C)
7 mg
UL94
HB
500°F
(260°C)
UL
-94°F
Flame Ret. Polyethylene
(-70°C) 224
Terephthalate (PET)
VW-1
to
This material is a self-extinguishing
thermoplastic polyester that can be used 257°F
(125°C)
indoors. It is also rated for use up to
257°F and will tolerate short-term
exposure up to 446°F. It is provided
with tracers to identify the flame
retardant material.
608°F
(320°C)
Resistant
Some
Resistant
except to Discoloration
oxidizing
acids
Resistant
No
Resistant
except to Discoloration
oxidizing
acids
Resistant
below 140°F
(60°C) except
to chlorinated
solvents
Resistant
except to
halogenated
hydrocarbons
Resistant
Resistant
Some
except to Discoloration
oxidizing
acids
Resistant
Resistant
1.2%
Resistant
except to
halogenated
hydrocarbons
Resistant
Resistant
Not
recomNo
mended Discoloration
12,000
(D638)
1.2%
Resistant
except to
halogenated
hydrocarbons
Resistant
Not
Resistant
recomNo
mended Discoloration
2.132.22
3000
(D876)
.01%
Resistant
Resistant
Resistant
Resistant
No
Discoloration
—
1.31
100,00
0
(D876)
.08%
Resistant to
some solvents
Resistant to
most weak
bases
Resistant
Resistant
No
Discoloration
—
1.39
100,00
0
(D876)
.08%
Resistant to
some solvents
Resistant to
most weak
bases
Resistant
Resistant
No
Discoloration
Most commonly used parts appear in BOLD.
Acids
Resistant
below 140°F
(60°C) except
to chlorinated
solvents
Resistant
below 140°F
(60°C) except
to chlorinated
solvents
NOTE: Typical operating temperature ranges are extended based on end use application and specific environmental tests.
‡TEFLON or equivalent fluorocarbon PTFE is used. Teflon is the registered trademark of E. I. DuPont de Nemours Co.
178
Petro-Chemicals
22 mg
Alkalies
Water Absorption
(Max. 24 hrs.)
239°F
(115°C)
-40°F
Natural Polyethylene
Lowest cost material for indoor use up to (-40°C)
to
122°F. Natural is available in all sizes.
122°F
Colors are available in 1/4" and 1/2".
(50°C)
-40°F
Weather Resistant Polyethylene
(-40°C)
This material has the same
to
properties as natural polyethylene, and
also has additives which allow it to resist 122°F
(50°C)
the effects of ultraviolet light and acid
rain in an outdoor environment. This
product is available in black only.
-40°F
Fire Resistant Polyethylene
(-40°C)
UL94-V2 Rating
to
This material is self extinguishing and
122°F
passes the UL94 flame
(50°C)
retardant test with a V2 rating.
-40°F
Flame Retardant Polyethylene
(-40°C)
UL94-V0 Rating
to
This material is self extinguishing and
194°F
passes the UL94 flame
(90°C)
retardant test with a V0 rating.
-40°F
Nylon 6.6
(-40°C)
Nylon is strong, durable, selfto
extinguishing material for indoor use up
149°F
to 149°F. It offers a combination of
(65°C)
lightweight, wide temperature range,
and high abrasion resistance. This
material is suitable for applications
where heavy vibration or stress exists
on the wiring or tubing.
-40°F
Weather Resistant Nylon
(-40°C)
This material has the same
to
properties as natural Nylon and also has
149°F
additives which allow it to resist the
(65°C)
effects of ultraviolet light in an outdoor
environment. This product is available in
black only.
-400°F
TEFLON‡
(-240°C)
This material is a non-flammable,
to
fluorocarbon resin material.
500°F
Suitable for use in any application
(260°C)
(including nuclear containment). It is
rated up to 356°F.
Color: Opaque to Translucent
-94°F
Polyethylene Terephthalate (PET)
This material is a thermoplastic polyester (-70°C)
to
material designed for indoor applications.
257°F
It is rated for use up to 257°F and will
tolerate short-term exposure up to 446°F. (125°C)
Colors: Black, White and Gray
Organic
Solvents
Minimum Tensile
@ 23°C (psi)
HB
UL
Temperature
Index
Specific
Gravity
(D792)
Chemical Resistance
Abrasion
Resistance
(Lower number
is better)
Physical Properties
Melting
Temperature
Ratings and Approvals
Flammability
(UL94)
BRAIDED EXPANDABLE SLEEVING
SPIRAL WRAP
Abrasion
Protection
Materials
Technical Data
Resistant
Some
Discoloration
Abrasion Protection Materials Technical Data
Water Absorption
(Max. 24 hrs.)
Organic
Solvents
Alkalies
Acids
—
.926.940
1500
(D638)
—
Resistant
except to
halogenated
hydrocarbons
Resistant
Resistant
Resistant
No
Discoloration
Nylon 6
Nylon is a strong, impact modified,
heat stabilized, durable high abrasion
resistant material.
-40°F (- UL94
40°C) to HB
230°F
(110°C)
410°F
(211°C)
—
1.061.16
8000
(D638)
1.3%
Resistant
except to
halogenated
hydrocarbons
Resistant
Not recommended
Resistant
No
Discoloration
PVC Non-Shrink Tubing
This material provides insulation and
protection for continuous use at
temperatures -4°F (-20°C) to
221°F(105°C).
UL
-4°F
(-20°C) 224
VW-1
to
221°F
(105°C)
—
—
1.35
2500
(D876)
—
Resistant
except to
aromatic
hydrocarbons,
ketones and
esters
Resistant
Resistant
Resistant
No
Discoloration
HB
239°F
(115°C)
22 mg
.91.93
1400
(D638)
.01%
Resistant
Resistant
Some
except to Discoloration
oxidizing
acids
HB
239°F
(115°C)
20 mg
.931.09
2000
(D638)
.03%
Resistant
below 140°F
(60°C) except
to chlorinated
solvents
Resistant
below 140°F
(60°C) except
to chlorinated
solvents
Resistant
No
Resistant
except to Discoloration
oxidizing
acids
V-0
270°F
(132°C)
22 mg
1.38
1200
.02%
Resistant
Resistant
Some
except to Discoloration
oxidizing
acids
V-2
491°F
(255°C)
7 mg
1.031.15
12,400
(D638)
1.5%
Resistant
below 140°F
(60°C) except
to chlorinated
solvents
Resistant
except to
phenols and
formic acid
Resistant
No
Resistant
to most Discoloration
weak
acids
-40°F
(-40°C)
to
122°F
(50°C)
-40°F
Weather Resistant Polyethylene
(-40°C)
This material has the same
to
properties as natural polyethylene, and
122°F
also has additives which allow it to
resist the effects of ultraviolet light and (50°C)
acid rain in an outdoor environment.
This product is available in black only.
-40°F
Flame Retardant Polyethylene
(-40°C)
UL94-V0 Rating
to
This material is self extinguishing and
140°F
passes the UL94 flame
(60°C)
retardant test with a V0 rating
-40°F
Nylon
(-40°C)
Nylon is strong, durable, selfto
extinguishing material for indoor use up
149°F
to 149°F. It offers a combination of
(65°C)
lightweight, wide temperature range,
and high abrasion resistance. This
material is suitable for applications
where heavy vibration or stress exists
on the wiring or tubing.
Petro-Chemicals
Minimum Tensile
@ 23°C (psi)
—
Flammability
(UL94)
-40°F (- UL94
40°C) to HB
122°F
(50°C)
UL
Temperature
Index
Specific
Gravity
(D792)
Chemical Resistance
Abrasion
Resistance
(Lower number
is better)
Physical Properties
Black Polyethylene
Lowest cost material is for
use up to 122°F. Other colors may be
available.
Natural Polyethylene
Lowest cost material for indoor use up
to 122°F. Natural is available in all
sizes.
GROMMET EDGING
Ratings and Approvals
Melting
Temperature
PVC TUBING
CORRUGATED LOOM TUBING
Abrasion
Protection
Materials
Technical Data
NOTE: Typical operating temperature ranges are extended based on end use application and specific environmental tests.
Most commonly used parts appear in BOLD.
179
Abrasion Protection Products Technical Data
The approximate required length of spiral wrap based on the bundle diameter can be determined by using
the graphs below; they show length required (in feet) per foot of bundle:
180
Most commonly used parts appear in BOLD.
Abrasion Protection Bulk Packaging
Bulk Package Part Numbers
The following is an alpha-numeric cross reference of Standard Package Wiring Abrasion Protection parts
with the corresponding Bulk Package part numbers:
Standard Part No.
Bulk Part No.
C
CLT25N-C630
CLT35F-2C0
CLT38F-C20
CLT38N-C630
CLT50F-C20
CLT50N-C630
CLT62F-C20
CLT62N-C630
CLT75F-C20
CLT75N-C630
CLT100F-C20
CLT100N-C630
CLT125F-L20
CLT125N-L630
CLT25N-10M630
CLT35F-7M20
CLT38F-5M20
CLT38N-5M630
CLT50F-4M20
CLT50N-4M630
CLT62F-2.5M20
CLT62N-2.5M630
CLT75F-2M20
CLT75N-2M630
CLT100F-125M20
CLT100N-125M630
CLT125F-.75M20
CLT125N-.75M630
T
T12F-C
T12N-C
T19N-C
T25F-C
T25F-C0
T25FR-C
T25FR-C20
T25N-C
T25N-C0
T25R-C
T25R-C20
T12F-D
T12N-D
T19N-M
T25F-M
T25F-M0
T25FR-M
T25FR-M20
T25N-M
T25N-M0
T25R-M
T25R-M20
Standard Part No.
T38F-C
T38F-C0
T38FR-C
T38N-C
T38R-C
T50F-C
T50F-C0
T50F-C4
T50FR-C
T50N-C
T50N-C0.
T50R-C
T62F-C
T62F-C0
T75F-C
T75F-C0
T75FR-C
T75N-C
Bulk Part No.
T38F-TL
T38F-TL0
T38FR-TL
T38N-TL
T38R-TL
T50F-TL
T50F-TL0
T50F-TL4
T50FR-TL
T50N-TL
T50N-TL0
T50R-TL
T62F-TL
T62F-TL0
T75F-T
T75F-T0
T75FR-T
T75N-T
Most commonly used parts appear in BOLD.
181
Complementary Wiring Products
Designed and manufactured for fast assembly,
long, reliable performance...
PAN-TERM ® Terminals,
Disconnects and Splices
• Funnel entry available on vinyl and nylon insulated
terminals and disconnects
• Made of electrolytically refined copper to provide
optimum combination of crimp forming properties and
low resistance, high conductivity terminations
• Offered in various types including rings, forks, locking
forks and short locking forks
• Available sizes from 26 to 2 AWG and stud diameters
from #2 to 1/2"
• Disconnects are available in many styles including
fully insulated. Splices and wire joints provide
permanent, reliable connections
• Wide assortment of manual, controlled cycle, battery
operated and pneumatic crimping tools which give
you reliable connections at a lower installed cost
Ask for PAN -TERM ® Terminal, Disconnects and Splices/
REEL SM ART ™ Termination Catalog — SA-TM09CB01A
REEL SMART ™ Continuously Molded Reel-Fed Terminals, Disconnects and Splices
“Reel” productivity assures high volume production at significant savings...
• ONE TECHNOLOGY, one solution for
continuously molded Terminals, Butt Splices and
Disconnects, including Fully Insulated Right Angle
Female Disconnects and Pre-Assembled
Locking Disconnects
• The REEL SMART ™ Termination System for
installing PANDUIT ® continuously molded products
provides the best solution for quality, reliable,
high volume terminations
• This patented system offers an array of technical
enhancements designed to dramatically reduce
set-up time and the amount of downtime traditionally
incurred with alternate systems
• Single, patented application terminates entire
product line
• Applicators compatible with automatic wire
processing machines and other
manufacturer’s presses
Ask for PAN-TERM ® Terminal, Disconnects and Splices/
REEL S MART ™ Termination Catalog — SA-TM09CB01A
182
Everywhere you need us!
Complementary Wiring Products
Identification and Labeling Solutions
PANDUIT ® offers a complete line of
industrial Identification Solutions...
• Computer Printable Labels
Thermal transfer, laser, ink jet and dot-matrix
labels available in a wide variety of sizes and
industrial materials
• Printers
Versatile hand-held printers for on-site labeling and
desktop thermal transfer printers for medium to high
volume applications
• Labeling Software
Labeling programs available for wire marking,
component identification and safety markers and tags
• Preprinted Markers
Available in books, cards, tape, slip-on and clip-on
formats for fast, convenient identification of wires,
cables and other industrial applications
• Lockout/Tagout and Safety
Lockout devices, training materials, tags and safety
markers for OSHA safety standard compliance
Ask for Identification Solutions Catalog SA101N315C-ID
Network Connectivity Systems
The unique PAN-NET ® Network Connectivity
System provides high performance solutions
with FUTURE READY features for system
upgradability. Lowest installed cost solutions are
available for both the enterprise and service
provider markets...
• Breadth of Product Offering
PANDUIT ® supplies copper and fiber optic connectivity
for reliable data, video and voice transmissions,
end-to-end cable management for maximum protection
and system integrity as well as standards compliance
pathway and outlet products for maximum performance
• Modular
All PANDUIT ® M INI-COM ® copper and fiber optic
modules snap in and out of all MINI-COM ® faceplates,
surface mount boxes, patch panels and multimedia
adapter panels
Ask for Network Connectivity Catalog SA-NC10CB01A
Everywhere you need us!
183
Complementary Wiring Products
PAN-WAY ® Surface Raceway System
The superior PAN-WAY ® Surface
Raceway System offers the
flexibility of accepting
PANDUIT ® communication and
power devices in addition to
devices offered from a wide
range of manufacturers. The
PAN-WAY ® system has become
the preferred routing system for
communication and electrical
specifiers and contractors...
• Advanced Designs
Among other features, all PANDUIT ® cable routing
pathways are designed to maintain the proper bend radius
control for high performance copper and fiber optic cabling
• Aesthetics
Unlike raceway systems of the past, PANDUIT ® perimeter
raceway has been designed with as much regard to form
as function
• Superior Termination Solutions
PANDUIT ® cable routing solutions provide you freedom of
choice when selecting your data and electrical outlets. Most
PANDUIT ® raceway systems accept both NEMA Standard
“Screw-On” faceplates as well as superior PANDUIT ®
Snap-On faceplates for PANDUIT ® Connectivity
• Complete Systems
All PANDUIT ® systems include a full complement of fittings
and accessories that allow a complete installation of a
single system or allow different PANDUIT ® raceway systems
to be used together
Ask for PAN -WAY ® Surface Raceway Catalog SA101N60B-LP
PANDUCT ® Wiring Duct — The Original Wiring Duct
PANDUIT ® offers the most comprehensive and
complete line of wiring duct for use in control panels
and other OEM and MRO applications. PANDUIT ®
provides a large selection of sizes, colors, styles and
materials so our customers can meet their specific
application requirements...
• PANDUIT ® Exclusive rounded edges will not cut
installers’ hands or wiring insulation
• Non-slip cover will not slip when installed on
duct base
• Flush cover design holds 10–12% more wires
than traditional duct designs
• Double scoreline saves installation time and
ultimately lowers installed cost
• Restricted slot design retains wire in slot for fast,
easy wire installation or removal
Ask for PANDU CT ® Wiring Duct Catalog SA-WDCB05
184
Everywhere you need us!
Complementary Wiring Products
Power Connectors
For applications in sizes #14 AWG through
1000 kcmil...
• Compression Connectors
Provide reliable permanently crimped connections in
sizes matched for each conductor size. They are
easy to install and provide a simplified means of
inspection of a proper crimp
• Custom Lugs
PANDUIT ® offers a wide variety of dimensional
choices for #8 AWG to 250 kcmil copper
compression lugs
• Mechanical Connectors
Economical, reusable connectors in many styles in
both copper and dual rated aluminum types
• Power Connector Tooling
Includes hand operated controlled-cycle, mechanical
and hydraulic crimping tools. Also available are the
UNI-D IE ™ CT-980 dieless tool and revolutionary
CT-2001 battery operated crimping tool
Ask for the Termination Solutions Catalog SA-TMCB02
Everywhere you need us!
185
Complementary Wiring Products
PANDUIT ® offers a variety of custom programs designed to permanently
identify PANDUIT ® products for your specific application...
• Custom Marking
All PANDUIT ® stainless steel and brass products
(ties, strapping, marker plates and tags) can be
custom marked by one of two precise computer
controlled systems (Laser or Embosser)
These systems provide sharp, crisp, high quality
legends. A variety of marking device accessories
is also available for permanent identification of
PANDUIT ® stainless steel and brass products
For more information call 866-405-6659
• Hot Stamping
PANDUIT ® nylon cable ties, marker ties and
marker plates can be custom identified to
meet your specific requirements, including
sequential numbering and specialized
company logos (see page 52).
For more information call 866-405-6660
186
Everywhere you need us!
Alphanumeric Part Number Index
Page
Number
Part Number
A
A1C12-A-C8 . . . . . . . . . . . . . . . . . . . . . . . . . . 110
A1C25-A-C8 . . . . . . . . . . . . . . . . . . . . . . . . . . 110
A1C38-A-C8 . . . . . . . . . . . . . . . . . . . . . . . . . . 110
A1C50-A-C8 . . . . . . . . . . . . . . . . . . . . . . . . . . 110
A2C12-A-C8 . . . . . . . . . . . . . . . . . . . . . . . . . . 110
A2C25-A-C8 . . . . . . . . . . . . . . . . . . . . . . . . . . 110
A2C38-A-C8 . . . . . . . . . . . . . . . . . . . . . . . . . . 110
A2C50-A-C8 . . . . . . . . . . . . . . . . . . . . . . . . . . 110
ABM1M-A-C. . . . . . . . . . . . . . . . . . . . . . . . . . . 85
ABM1M-AT-C . . . . . . . . . . . . . . . . . . . . . . . . . . 85
ABM2S-A-C . . . . . . . . . . . . . . . . . . . . . . . . . . . 86
ABM2S-AT-C . . . . . . . . . . . . . . . . . . . . . . . . . . 86
ABM2S-AT-C0 . . . . . . . . . . . . . . . . . . . . . . . . . 86
ABM2S-S6-D . . . . . . . . . . . . . . . . . . . . . . . . . . . 86
ABM3H-A-L . . . . . . . . . . . . . . . . . . . . . . . . . . . 86
ABM3H-AT-L . . . . . . . . . . . . . . . . . . . . . . . . . . . 86
ABM3H-S6-T . . . . . . . . . . . . . . . . . . . . . . . . . . . 86
ABM4H-A-L . . . . . . . . . . . . . . . . . . . . . . . . . . . 86
ABM4H-AT-L . . . . . . . . . . . . . . . . . . . . . . . . . . . 86
ABM4H-S6-T . . . . . . . . . . . . . . . . . . . . . . . . . . . 86
ABM100-A-C . . . . . . . . . . . . . . . . . . . . . . . . . . 86
ABM100-AT-C . . . . . . . . . . . . . . . . . . . . . . . . . . 86
ABM100-AT-C0 . . . . . . . . . . . . . . . . . . . . . . . . . 86
ABM100-S6-C . . . . . . . . . . . . . . . . . . . . . . . . . . 86
ABM100-S6-C69 . . . . . . . . . . . . . . . . . . . . . . . . 86
ABM112-A-C . . . . . . . . . . . . . . . . . . . . . . . . . . 86
ABM112-AT-C . . . . . . . . . . . . . . . . . . . . . . . . . . 86
ABM112-AT-C0 . . . . . . . . . . . . . . . . . . . . . . . . . 86
ABM112-S6-C . . . . . . . . . . . . . . . . . . . . . . . . . . 86
ABM112-S6-C69 . . . . . . . . . . . . . . . . . . . . . . . . 86
ABMM-A-C. . . . . . . . . . . . . . . . . . . . . . . . . . . . 85
ABMM-AT-C . . . . . . . . . . . . . . . . . . . . . . . . . . . 85
ABMM-AT-C0 . . . . . . . . . . . . . . . . . . . . . . . . . . 85
ABMM-D . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 86
ABMT-A-C . . . . . . . . . . . . . . . . . . . . . . . . . . . . 132
ABMT-A-C20 . . . . . . . . . . . . . . . . . . . . . . . . . . 132
ABMT-S6-C . . . . . . . . . . . . . . . . . . . . . . . . . . . 132
ABMT-S6-C20 . . . . . . . . . . . . . . . . . . . . . . . . . 132
ABMT-S6-C60 . . . . . . . . . . . . . . . . . . . . . . . . . 132
ABMT-S6-C69 . . . . . . . . . . . . . . . . . . . . . . . . . 132
ACC19-A-C . . . . . . . . . . . . . . . . . . . . . . . . . . . 109
ACC19-A-C20 . . . . . . . . . . . . . . . . . . . . . . . . . 109
ACC19-AT-C . . . . . . . . . . . . . . . . . . . . . . . . . . 109
ACC19-AT-C0 . . . . . . . . . . . . . . . . . . . . . . . . . 109
ACC38-A-C . . . . . . . . . . . . . . . . . . . . . . . . . . 109
ACC38-A-C20 . . . . . . . . . . . . . . . . . . . . . . . . . 109
ACC38-AT-C . . . . . . . . . . . . . . . . . . . . . . . . . . 109
ACC38-AT-C0 . . . . . . . . . . . . . . . . . . . . . . . . . 109
ACC62-A-C . . . . . . . . . . . . . . . . . . . . . . . . . . . 109
ACC62-A-C20 . . . . . . . . . . . . . . . . . . . . . . . . . 109
ACC62-AT-C . . . . . . . . . . . . . . . . . . . . . . . . . . 109
ACC62-AT-C0 . . . . . . . . . . . . . . . . . . . . . . . . . 109
ADCC31-AT-C10 . . . . . . . . . . . . . . . . . . . . . . . 112
AJC19-A-C . . . . . . . . . . . . . . . . . . . . . . . . . . . 110
AJC25-A-C . . . . . . . . . . . . . . . . . . . . . . . . . . . 110
AJC31-A-C . . . . . . . . . . . . . . . . . . . . . . . . . . . 110
AJC38-A-C . . . . . . . . . . . . . . . . . . . . . . . . . . . 110
AM2-C . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 92
AMC25-AT-C10 . . . . . . . . . . . . . . . . . . . . . . . . 112
ARC.68-A-Q . . . . . . . . . . . . . . . . . . . . . . . . . . 108
ARC.68-A-Q14 . . . . . . . . . . . . . . . . . . . . . . . . 108
ARC.68-S6-Q . . . . . . . . . . . . . . . . . . . . . . . . . 108
ARC.68-S6-Q14 . . . . . . . . . . . . . . . . . . . . . . . 108
ASMS-A-X . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 88
AST10-5-C100. . . . . . . . . . . . . . . . . . . . . . . . . 107
AST15-5-C100. . . . . . . . . . . . . . . . . . . . . . . . . 107
AST20-5-C100. . . . . . . . . . . . . . . . . . . . . . . . . 107
AST25-5-C100. . . . . . . . . . . . . . . . . . . . . . . . . 107
B
B2M2S-D . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 33
B3M2S-TL . . . . . . . . . . . . . . . . . . . . . . . . . . . . 33
B4M2S-TL . . . . . . . . . . . . . . . . . . . . . . . . . . . . 33
BC1M-S4-M . . . . . . . . . . . . . . . . . . . . . . . . . . . . 31
BC1.5I-S8-M . . . . . . . . . . . . . . . . . . . . . . . . . . . 31
BC2M-S4-M . . . . . . . . . . . . . . . . . . . . . . . . . . . . 31
BC2S-S10-C . . . . . . . . . . . . . . . . . . . . . . . . . . . 31
BC2S-S10-C0 . . . . . . . . . . . . . . . . . . . . . . . . . . 31
BC3S-S10-C . . . . . . . . . . . . . . . . . . . . . . . . . . . 31
BC3S-S10-D0 . . . . . . . . . . . . . . . . . . . . . . . . . . 31
BC4LH-S25-L . . . . . . . . . . . . . . . . . . . . . . . . . . 31
BC4LH-S25-L0 . . . . . . . . . . . . . . . . . . . . . . . . . 31
BC4S-S10-C . . . . . . . . . . . . . . . . . . . . . . . . . . . 31
BC4S-S10-C0 . . . . . . . . . . . . . . . . . . . . . . . . . . 31
BEC38-A-L . . . . . . . . . . . . . . . . . . . . . . . . . . . 112
BEC38-A-L20 . . . . . . . . . . . . . . . . . . . . . . . . . 112
BEC38-AT-L0 . . . . . . . . . . . . . . . . . . . . . . . . . 112
BEC62-A-L . . . . . . . . . . . . . . . . . . . . . . . . . . . 112
BEC62-A-L20 . . . . . . . . . . . . . . . . . . . . . . . . . 112
BEC62-AT-L0 . . . . . . . . . . . . . . . . . . . . . . . . . 112
BEC75-A-L . . . . . . . . . . . . . . . . . . . . . . . . . . . 112
BEC75-A-L20 . . . . . . . . . . . . . . . . . . . . . . . . . 112
BEC75-AT-L0 . . . . . . . . . . . . . . . . . . . . . . . . . 112
Page
Number
Part Number
BECP38H25-L. . . . . . . . . . . . . . . . . . . . . . . . . 112
BECP38H25-L20. . . . . . . . . . . . . . . . . . . . . . . 112
BECP75H25-L. . . . . . . . . . . . . . . . . . . . . . . . . 112
BECP75H25-L20. . . . . . . . . . . . . . . . . . . . . . . 112
BF1M-C . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 32
BF2M-C . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .32
BM1M-C . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 32
BM2M-C . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .32
BM2S-C . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 32
BM4S-C . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .32
BR.5-E6-C . . . . . . . . . . . . . . . . . . . . . . . . . . . . 125
BR.75-E6-C . . . . . . . . . . . . . . . . . . . . . . . . . . . 125
BR2-1.3-A-X . . . . . . . . . . . . . . . . . . . . . . . . . . 125
BR2-1.3-X . . . . . . . . . . . . . . . . . . . . . . . . . . . . 125
BR2-1.5-X . . . . . . . . . . . . . . . . . . . . . . . . . . . . 125
BR2-4-X. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 125
BR2-6-X. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 125
BT1HT . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 80
BT1M-C . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .28
BT1M-C0 . . . . . . . . . . . . . . . . . . . . . . . . . . . . .29
BT1M-M39. . . . . . . . . . . . . . . . . . . . . . . . . . . . . 30
BT1.5I-C . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .28
BT1.5I-C0 . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 29
BT1.5I-M39 . . . . . . . . . . . . . . . . . . . . . . . . . . . . 30
BT1.5M-C . . . . . . . . . . . . . . . . . . . . . . . . . . . . .28
BT1.5M-C0 . . . . . . . . . . . . . . . . . . . . . . . . . . . .29
BT2I-C . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .28
BT2I-C0 . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .29
BT2LH-L . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 28
BT2LH-L0 . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 29
BT2M-C . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .28
BT2M-C0 . . . . . . . . . . . . . . . . . . . . . . . . . . . . .29
BT2S-C. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .28
BT2S-C0. . . . . . . . . . . . . . . . . . . . . . . . . . . . . .29
BT2S-M39 . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 30
BT3I-C . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .28
BT3I-C0 . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .29
BT3LH-L . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 28
BT3LH-L0 . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 29
BT3S-C. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .28
BT3S-C0. . . . . . . . . . . . . . . . . . . . . . . . . . . . . .29
BT3S-M39 . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 30
BT4I-C . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .28
BT4I-C0 . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .29
BT4LH-L. . . . . . . . . . . . . . . . . . . . . . . . . . . . . .28
BT4LH-L0. . . . . . . . . . . . . . . . . . . . . . . . . . . . .29
BT4LH-TL39 . . . . . . . . . . . . . . . . . . . . . . . . . . . 30
BT4M-C . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .28
BT4M-C0 . . . . . . . . . . . . . . . . . . . . . . . . . . . . .29
BT4S-C. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .28
BT4S-C0. . . . . . . . . . . . . . . . . . . . . . . . . . . . . .29
BT4S-M39 . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 30
BT5LH-L . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 28
BT5LH-L0 . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 29
BT6LH-L . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 28
BT6LH-L0 . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 29
BT7LH-L . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 28
BT7LH-L0 . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 29
BT8LH-L . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 28
BT8LH-L0 . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 29
BT9LH-L. . . . . . . . . . . . . . . . . . . . . . . . . . . . . .28
BT9LH-L0. . . . . . . . . . . . . . . . . . . . . . . . . . . . .29
BW1.5I-D . . . . . . . . . . . . . . . . . . . . . . . . . . . . .30
BW2S-D . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .30
C
CBLS18-C . . . . . . . . . . . . . . . . . . . . . . . . . . . . 123
CBLS25-C . . . . . . . . . . . . . . . . . . . . . . . . . . . . 123
CBLS37-C . . . . . . . . . . . . . . . . . . . . . . . . . . . . 123
CBLS50-C . . . . . . . . . . . . . . . . . . . . . . . . . . . . 123
CBLS62-C . . . . . . . . . . . . . . . . . . . . . . . . . . . . 123
CBLS75-C . . . . . . . . . . . . . . . . . . . . . . . . . . . . 123
CBP12-C . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 122
CBP25-C . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 122
CBP31-C . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 122
CBP37-C . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 122
CBP50-C . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 122
CBP62-C . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 122
CBP75-C . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 122
CBP87-C . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 122
CBP100-C . . . . . . . . . . . . . . . . . . . . . . . . . . . . 122
CBR1M-M. . . . . . . . . . . . . . . . . . . . . . . . . . . . .36
CBR1M-M0. . . . . . . . . . . . . . . . . . . . . . . . . . . .36
CBR1.5I-M . . . . . . . . . . . . . . . . . . . . . . . . . . . .36
CBR1.5I-M0 . . . . . . . . . . . . . . . . . . . . . . . . . . .36
CBR1.5M-M . . . . . . . . . . . . . . . . . . . . . . . . . . .36
CBR1.5M-M0 . . . . . . . . . . . . . . . . . . . . . . . . . .36
CBR2HS-D . . . . . . . . . . . . . . . . . . . . . . . . . . . .36
CBR2HS-D0 . . . . . . . . . . . . . . . . . . . . . . . . . . .36
CBR2M-M. . . . . . . . . . . . . . . . . . . . . . . . . . . . .36
CBR2M-M0. . . . . . . . . . . . . . . . . . . . . . . . . . . .36
CBR2S-M . . . . . . . . . . . . . . . . . . . . . . . . . . . . .36
CBR2S-M0 . . . . . . . . . . . . . . . . . . . . . . . . . . . .36
Part Number
Page
Number
CBR3I-M . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 36
CBR3I-M0 . . . . . . . . . . . . . . . . . . . . . . . . . . . . 36
CBR3S-M . . . . . . . . . . . . . . . . . . . . . . . . . . . . 36
CBR3S-M0 . . . . . . . . . . . . . . . . . . . . . . . . . . . 36
CBR4I-M . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 36
CBR4I-M0 . . . . . . . . . . . . . . . . . . . . . . . . . . . . 36
CBR4LH-TL . . . . . . . . . . . . . . . . . . . . . . . . . . 36
CBR4LH-TL0 . . . . . . . . . . . . . . . . . . . . . . . . . 36
CBR4S-M . . . . . . . . . . . . . . . . . . . . . . . . . . . . 36
CBR4S-M0 . . . . . . . . . . . . . . . . . . . . . . . . . . . 36
CBR6LH-C . . . . . . . . . . . . . . . . . . . . . . . . . . . 36
CBR6LH-C0 . . . . . . . . . . . . . . . . . . . . . . . . . . 36
CCH12-S10-C. . . . . . . . . . . . . . . . . . . . . . . . . 117
CCH19-S10-C. . . . . . . . . . . . . . . . . . . . . . . . . 117
CCH25-S10-C. . . . . . . . . . . . . . . . . . . . . . . . 117
CCH31-S10-C. . . . . . . . . . . . . . . . . . . . . . . . . 117
CCH38-S10-C. . . . . . . . . . . . . . . . . . . . . . . . 117
CCH44-S10-C. . . . . . . . . . . . . . . . . . . . . . . . . 117
CCH50-S10-C. . . . . . . . . . . . . . . . . . . . . . . . 117
CCH56-S10-C. . . . . . . . . . . . . . . . . . . . . . . . . 117
CCH62-S10-C. . . . . . . . . . . . . . . . . . . . . . . . . 117
CCH69-S10-C. . . . . . . . . . . . . . . . . . . . . . . . . 117
CCH75-S10-C. . . . . . . . . . . . . . . . . . . . . . . . . 117
CCH81-S10-C. . . . . . . . . . . . . . . . . . . . . . . . . 117
CCH87-S10-C. . . . . . . . . . . . . . . . . . . . . . . . . 117
CCH100-S10-C . . . . . . . . . . . . . . . . . . . . . . . . 117
CCH112-S10-C . . . . . . . . . . . . . . . . . . . . . . . . 117
CCH119-S10-C . . . . . . . . . . . . . . . . . . . . . . . . 117
CCH125-S10-C . . . . . . . . . . . . . . . . . . . . . . . . 117
CCH138-S10-C . . . . . . . . . . . . . . . . . . . . . . . . 117
CCH150-S10-C . . . . . . . . . . . . . . . . . . . . . . . . 117
CCMKIT1 . . . . . . . . . . . . . . . . . . . . . . . . . . . . 133
CCS12-S8-C . . . . . . . . . . . . . . . . . . . . . . . . . . 117
CCS19-S8-C . . . . . . . . . . . . . . . . . . . . . . . . . . 117
CCS25-S8-C . . . . . . . . . . . . . . . . . . . . . . . . . 117
CCS25-S10-C . . . . . . . . . . . . . . . . . . . . . . . . . 117
CCS31-S8-C . . . . . . . . . . . . . . . . . . . . . . . . . . 117
CCS38-S8-C . . . . . . . . . . . . . . . . . . . . . . . . . . 117
CCS44-S8-C . . . . . . . . . . . . . . . . . . . . . . . . . . 117
CCS50-S8-C . . . . . . . . . . . . . . . . . . . . . . . . . . 117
CF382538F-Q . . . . . . . . . . . . . . . . . . . . . . . . . 174
CF502550F-Q . . . . . . . . . . . . . . . . . . . . . . . . . 174
CF503850F-Q . . . . . . . . . . . . . . . . . . . . . . . . . 174
CF752575F-Q . . . . . . . . . . . . . . . . . . . . . . . . . 174
CF753875F-Q . . . . . . . . . . . . . . . . . . . . . . . . . 174
CH105-A-C14 . . . . . . . . . . . . . . . . . . . . . . . . . 113
CH105-S6-C14 . . . . . . . . . . . . . . . . . . . . . . . . 113
CLT25F-C3 . . . . . . . . . . . . . . . . . . . . . . . . . . . 173
CLT25F-C20 . . . . . . . . . . . . . . . . . . . . . . . . . . 173
CLT25N-C630. . . . . . . . . . . . . . . . . . . . . . . . . 173
CLT35F-C3 . . . . . . . . . . . . . . . . . . . . . . . . . . . 173
CLT35F-C20 . . . . . . . . . . . . . . . . . . . . . . . . . . 173
CLT35N-C630. . . . . . . . . . . . . . . . . . . . . . . . . 173
CLT38F-C3 . . . . . . . . . . . . . . . . . . . . . . . . . . . 173
CLT38F-C20 . . . . . . . . . . . . . . . . . . . . . . . . . . 173
CLT38N-C630. . . . . . . . . . . . . . . . . . . . . . . . . 173
CLT50F-C3 . . . . . . . . . . . . . . . . . . . . . . . . . . . 173
CLT50F-C20 . . . . . . . . . . . . . . . . . . . . . . . . . . 173
CLT50N-C630. . . . . . . . . . . . . . . . . . . . . . . . . 173
CLT62F-C3 . . . . . . . . . . . . . . . . . . . . . . . . . . . 173
CLT62F-C20 . . . . . . . . . . . . . . . . . . . . . . . . . . 173
CLT62N-C630. . . . . . . . . . . . . . . . . . . . . . . . . 173
CLT75F-C3 . . . . . . . . . . . . . . . . . . . . . . . . . . . 173
CLT75F-C20 . . . . . . . . . . . . . . . . . . . . . . . . . . 173
CLT75N-C630. . . . . . . . . . . . . . . . . . . . . . . . . 173
CLT100F-C3 . . . . . . . . . . . . . . . . . . . . . . . . . . 173
CLT100F-C20 . . . . . . . . . . . . . . . . . . . . . . . . . 173
CLT100N-C630. . . . . . . . . . . . . . . . . . . . . . . . 173
CLT125F-L3 . . . . . . . . . . . . . . . . . . . . . . . . . . 173
CLT125F-L20 . . . . . . . . . . . . . . . . . . . . . . . . . 173
CLT125N-L630 . . . . . . . . . . . . . . . . . . . . . . . . 173
CLT150F-D3 . . . . . . . . . . . . . . . . . . . . . . . . . . 173
CLT150F-D4 . . . . . . . . . . . . . . . . . . . . . . . . . . 173
CLT150F-D20 . . . . . . . . . . . . . . . . . . . . . . . . . 173
CLT150F-T20 . . . . . . . . . . . . . . . . . . . . . . . . . 173
CLT150F-X3 . . . . . . . . . . . . . . . . . . . . . . . . . . 173
CLT150F-X4 . . . . . . . . . . . . . . . . . . . . . . . . . . 173
CLT150F-X20 . . . . . . . . . . . . . . . . . . . . . . . . . 173
CLT150N-D630. . . . . . . . . . . . . . . . . . . . . . . . 173
CLT188F-6C20 . . . . . . . . . . . . . . . . . . . . . . . . 173
CLT188F-C3 . . . . . . . . . . . . . . . . . . . . . . . . . . 173
CLT188F-C4 . . . . . . . . . . . . . . . . . . . . . . . . . . 173
CLT188F-C20 . . . . . . . . . . . . . . . . . . . . . . . . . 173
CLT188F-X3 . . . . . . . . . . . . . . . . . . . . . . . . . . 173
CLT188F-X4 . . . . . . . . . . . . . . . . . . . . . . . . . . 173
CLT188F-X20 . . . . . . . . . . . . . . . . . . . . . . . . . 173
CLT188N-6C630 . . . . . . . . . . . . . . . . . . . . . . . 173
CLTS25F-C. . . . . . . . . . . . . . . . . . . . . . . . . . . 173
CLTS25F-C3. . . . . . . . . . . . . . . . . . . . . . . . . . 173
CLTS25N-C . . . . . . . . . . . . . . . . . . . . . . . . . . 173
CLTS35F-C. . . . . . . . . . . . . . . . . . . . . . . . . . . 173
CLTS35F-C3. . . . . . . . . . . . . . . . . . . . . . . . . . 173
CLTS35N-C . . . . . . . . . . . . . . . . . . . . . . . . . . 173
Most commonly used parts appear in BOLD.
187
Alphanumeric Part Number Index
Page
Number
Part Number
CLTS38F-C . . . . . . . . . . . . . . . . . . . . . . . . . . .173
CLTS38F-C3 . . . . . . . . . . . . . . . . . . . . . . . . . . 173
CLTS38N-C . . . . . . . . . . . . . . . . . . . . . . . . . . .173
CLTS50F-C . . . . . . . . . . . . . . . . . . . . . . . . . . .173
CLTS50F-C3 . . . . . . . . . . . . . . . . . . . . . . . . . . 173
CLTS50N-C . . . . . . . . . . . . . . . . . . . . . . . . . . .173
CLTS62F-C . . . . . . . . . . . . . . . . . . . . . . . . . . .173
CLTS62F-C3 . . . . . . . . . . . . . . . . . . . . . . . . . . 173
CLTS62N-C . . . . . . . . . . . . . . . . . . . . . . . . . . .173
CLTS75F-C . . . . . . . . . . . . . . . . . . . . . . . . . . .173
CLTS75F-C3 . . . . . . . . . . . . . . . . . . . . . . . . . . 173
CLTS75N-C . . . . . . . . . . . . . . . . . . . . . . . . . . .173
CLTS100F-C . . . . . . . . . . . . . . . . . . . . . . . . . . 173
CLTS100F-C3 . . . . . . . . . . . . . . . . . . . . . . . . . 173
CLTS100N-C . . . . . . . . . . . . . . . . . . . . . . . . . . 173
CLTS125F-L. . . . . . . . . . . . . . . . . . . . . . . . . . . 173
CLTS125F-L3. . . . . . . . . . . . . . . . . . . . . . . . . . 173
CLTS125N-L. . . . . . . . . . . . . . . . . . . . . . . . . . . 173
CLTS150F-D . . . . . . . . . . . . . . . . . . . . . . . . . . 173
CLTS150F-D3 . . . . . . . . . . . . . . . . . . . . . . . . . 173
CM4S-L2 . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 49
CM4S-L8 . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 49
CMVDR1 . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 131
CMVDR1S . . . . . . . . . . . . . . . . . . . . . . . . . . . . 131
CMVDR2 . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 131
CMVDR2S . . . . . . . . . . . . . . . . . . . . . . . . . . . . 131
CMVDRC . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 131
CMWB . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 130
CMWB10 . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 130
CMW-KIT . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 130
CMW-KIT10 . . . . . . . . . . . . . . . . . . . . . . . . . . .130
CMWW . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 130
CMWW10 . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 130
CPH.75-S8-X . . . . . . . . . . . . . . . . . . . . . . . . . . 125
CPL.75-S8-X . . . . . . . . . . . . . . . . . . . . . . . . . . 125
CPM87S-C . . . . . . . . . . . . . . . . . . . . . . . . . . . .102
CPM122S-C . . . . . . . . . . . . . . . . . . . . . . . . . . . 102
CR2-M . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 104
CR4H-M . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 104
CR4H-M0 . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 104
CROS-M. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 104
CRS1-125-X . . . . . . . . . . . . . . . . . . . . . . . . . . . 131
CRS1-X . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 131
CRS4-125-X . . . . . . . . . . . . . . . . . . . . . . . . . . . 131
CRS6-X . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 131
CSCS-M . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 105
CSH-D0 . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 105
CSH-D20 . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 105
D
DCT . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 157
DHC1.12x1.75-D0 . . . . . . . . . . . . . . . . . . . . . . . 48
DT4EH-L0, DT8EH-Q0, DTREH-LR0,
DTHEH-Q0, DTKEH-0 . . . . . . . . . . . . . . . . . . . .33
E
EMA-X . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 88
EMS-A-C . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 88
EMS-A-C0 . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 88
EMSK3-1-3-0 . . . . . . . . . . . . . . . . . . . . . . . . . . . 88
EMSK3-1-X0. . . . . . . . . . . . . . . . . . . . . . . . . . . . 88
EMSK12-4-12-X0 . . . . . . . . . . . . . . . . . . . . . . . .88
ER.5-E4-X . . . . . . . . . . . . . . . . . . . . . . . . . . . . 124
ER1.25-E4-X . . . . . . . . . . . . . . . . . . . . . . . . . . 124
F
FCBI1-A-C20 . . . . . . . . . . . . . . . . . . . . . . . . . . 103
FCBI1-S10-C20 . . . . . . . . . . . . . . . . . . . . . . . . 103
FCBI2-A-C20 . . . . . . . . . . . . . . . . . . . . . . . . . . 103
FCBI2-S10-C20 . . . . . . . . . . . . . . . . . . . . . . . . 103
FCBI3-A-C20 . . . . . . . . . . . . . . . . . . . . . . . . . . 103
FCBI3-S10-C20 . . . . . . . . . . . . . . . . . . . . . . . . 103
FCC5-A-C8. . . . . . . . . . . . . . . . . . . . . . . . . . . .115
FCC-A-C8. . . . . . . . . . . . . . . . . . . . . . . . . . . . . 115
FCH2-A-C14. . . . . . . . . . . . . . . . . . . . . . . . . . . 115
FCH2-S6-C14. . . . . . . . . . . . . . . . . . . . . . . . . . 115
FCM1-A-C14 . . . . . . . . . . . . . . . . . . . . . . . . . . 114
FCM1-S6-C14 . . . . . . . . . . . . . . . . . . . . . . . . . 114
FCM1.2-A-C14 . . . . . . . . . . . . . . . . . . . . . . . . . 114
FCM1.2-S6-C14 . . . . . . . . . . . . . . . . . . . . . . . .114
FCM2-A-C14 . . . . . . . . . . . . . . . . . . . . . . . . . . 114
FCM2-S6-C14 . . . . . . . . . . . . . . . . . . . . . . . . . 114
FCM3.25-A-L14 . . . . . . . . . . . . . . . . . . . . . . . . 114
FCM3.25-S6-L14 . . . . . . . . . . . . . . . . . . . . . . .114
FCPI1-C20 . . . . . . . . . . . . . . . . . . . . . . . . . . . . 103
FCPI2-C20 . . . . . . . . . . . . . . . . . . . . . . . . . . . . 103
FCPI3-C20 . . . . . . . . . . . . . . . . . . . . . . . . . . . . 103
FS156-C . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 127
FSH40-X. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 127
FSHH-X . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 127
G
GCTC3S-X0 . . . . . . . . . . . . . . . . . . . . . . . . . . . . 41
GCTC5S-X0 . . . . . . . . . . . . . . . . . . . . . . . . . . . . 41
GCTE2S-X0 . . . . . . . . . . . . . . . . . . . . . . . . . . . .41
GCTE4S-X0 . . . . . . . . . . . . . . . . . . . . . . . . . . . .41
188
Most commonly used parts appear in BOLD.
Page
Number
Part Number
GE52-C . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 171
GE52-C69 . . . . . . . . . . . . . . . . . . . . . . . . . . . . 171
GE85-C . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 171
GE85-C69 . . . . . . . . . . . . . . . . . . . . . . . . . . . . 171
GE128-C . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 171
GE128-C69 . . . . . . . . . . . . . . . . . . . . . . . . . . . 171
GE192-L. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 171
GE192-L69. . . . . . . . . . . . . . . . . . . . . . . . . . . . 171
GE255-L. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 171
GE318-L. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 171
GE380-Q . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 171
GE510-Q . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 171
GEE36F-C . . . . . . . . . . . . . . . . . . . . . . . . . . . . 171
GEE36F-C0 . . . . . . . . . . . . . . . . . . . . . . . . . . . 171
GEE36FR-C. . . . . . . . . . . . . . . . . . . . . . . . . . . 171
GEE47N-C . . . . . . . . . . . . . . . . . . . . . . . . . . . . 171
GEE55N-C . . . . . . . . . . . . . . . . . . . . . . . . . . . . 171
GEE62F-A-C . . . . . . . . . . . . . . . . . . . . . . . . . . 171
GEE62F-A-C0 . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .171
GEE62F-C . . . . . . . . . . . . . . . . . . . . . . . . . . . . 171
GEE62F-C0 . . . . . . . . . . . . . . . . . . . . . . . . . . . 171
GEE62FR-C. . . . . . . . . . . . . . . . . . . . . . . . . . . 171
GEE71N-C . . . . . . . . . . . . . . . . . . . . . . . . . . . . 171
GEE98N-C . . . . . . . . . . . . . . . . . . . . . . . . . . . . 171
GEE99F-A-C . . . . . . . . . . . . . . . . . . . . . . . . . . 171
GEE99F-A-C0 . . . . . . . . . . . . . . . . . . . . . . . . . 171
GEE99F-C . . . . . . . . . . . . . . . . . . . . . . . . . . . . 171
GEE99F-C0 . . . . . . . . . . . . . . . . . . . . . . . . . . . 171
GEE99FR-C. . . . . . . . . . . . . . . . . . . . . . . . . . . 171
GEE134N-C . . . . . . . . . . . . . . . . . . . . . . . . . . . 171
GEE144F-A-C . . . . . . . . . . . . . . . . . . . . . . . . . 171
GEE144F-A-C0 . . . . . . . . . . . . . . . . . . . . . . . . 171
GEE144F-C . . . . . . . . . . . . . . . . . . . . . . . . . . . 171
GEE144F-C0 . . . . . . . . . . . . . . . . . . . . . . . . . . 171
GEE144FR-C. . . . . . . . . . . . . . . . . . . . . . . . . . 171
GES36F-C . . . . . . . . . . . . . . . . . . . . . . . . . . . . 171
GES36F-C0 . . . . . . . . . . . . . . . . . . . . . . . . . . . 171
GES36FR-C. . . . . . . . . . . . . . . . . . . . . . . . . . . 171
GES62F-A-C . . . . . . . . . . . . . . . . . . . . . . . . . . 171
GES62F-A-C0 . . . . . . . . . . . . . . . . . . . . . . . . . 171
GES62F-C . . . . . . . . . . . . . . . . . . . . . . . . . . . . 171
GES62F-C0 . . . . . . . . . . . . . . . . . . . . . . . . . . . 171
GES62FR-C. . . . . . . . . . . . . . . . . . . . . . . . . . . 171
GES99F-A-C . . . . . . . . . . . . . . . . . . . . . . . . . . 171
GES99F-A-C0 . . . . . . . . . . . . . . . . . . . . . . . . . 171
GES99F-C . . . . . . . . . . . . . . . . . . . . . . . . . . . . 171
GES99F-C0 . . . . . . . . . . . . . . . . . . . . . . . . . . . 171
GES99FR-C. . . . . . . . . . . . . . . . . . . . . . . . . . . 171
GES144F-A-C . . . . . . . . . . . . . . . . . . . . . . . . . 171
GES144F-A-C0 . . . . . . . . . . . . . . . . . . . . . . . . 171
GES144F-C . . . . . . . . . . . . . . . . . . . . . . . . . . . 171
GES144F-C0 . . . . . . . . . . . . . . . . . . . . . . . . . . 171
GES144FR-C. . . . . . . . . . . . . . . . . . . . . . . . . . 171
GES189F-C . . . . . . . . . . . . . . . . . . . . . . . . . . . 171
GES189F-C0 . . . . . . . . . . . . . . . . . . . . . . . . . . 171
GHH . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 59
GS2B . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 55-56
GS4EH. . . . . . . . . . . . . . . . . . . . . . . . . . . . . 55-56
GS4H . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 55-56
GS4H121W . . . . . . . . . . . . . . . . . . . . . . . . . 55-56
GS4H/B . . . . . . . . . . . . . . . . . . . . . . . . . . . . 55-56
GS4MT . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 78
GTH . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 55-56
GTS . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 55-56
H
HB2SP19-X . . . . . . . . . . . . . . . . . . . . . . . . . . . 129
HB2SP25-X . . . . . . . . . . . . . . . . . . . . . . . . . . . 129
HB4SP19-X . . . . . . . . . . . . . . . . . . . . . . . . . . . 129
HB4SP25-X . . . . . . . . . . . . . . . . . . . . . . . . . . . 129
HB6SP19-X . . . . . . . . . . . . . . . . . . . . . . . . . . . 129
HBN.75-T . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 126
HBN1-T . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 126
HBN1.5-T . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 126
HBN2-T . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 126
HBN2.5-T . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 126
HBN3-T . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 126
HBN4-T . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 126
HCME06A12-C130 . . . . . . . . . . . . . . . . . . . . . 121
HCMP06B12-C20 . . . . . . . . . . . . . . . . . . . . . . 121
HCMP06C12-C20 . . . . . . . . . . . . . . . . . . . . . . 121
HKBS . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 176
HLC3S-X0. . . . . . . . . . . . . . . . . . . . . . . . . . . . 40
HLC5S-X0 . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 40
HLM-15R0 . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 40
HLS1.5S-X0 . . . . . . . . . . . . . . . . . . . . . . . . . . . . 40
HLS-15R0 . . . . . . . . . . . . . . . . . . . . . . . . . . . . 40
HLS3S-X0 . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 40
HLS5S-X0 . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 40
HLS-75R0 . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 40
HLSP1.5S-X12 . . . . . . . . . . . . . . . . . . . . . . . . 40
HLSP3S-X12. . . . . . . . . . . . . . . . . . . . . . . . . . 40
HLSP5S-X12. . . . . . . . . . . . . . . . . . . . . . . . . . 40
HLT2I-X0. . . . . . . . . . . . . . . . . . . . . . . . . . . . . 40
Part Number
Page
Number
HLT3I-X0 . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 40
HLTP2I-X12. . . . . . . . . . . . . . . . . . . . . . . . . . . 40
HLTP3I-X12. . . . . . . . . . . . . . . . . . . . . . . . . . . 40
HSC.25-L. . . . . . . . . . . . . . . . . . . . . . . . . . . . . 119
HSC.25-L100. . . . . . . . . . . . . . . . . . . . . . . . . . 119
HSEC0.5-X, HSEC0.8-X . . . . . . . . . . . . . . . . 155
HSEC1.0-X, HSEC1.5-5 . . . . . . . . . . . . . . . . 155
HSEC2.0-5, HSEC4.0-2 . . . . . . . . . . . . . . . . 155
HSG-115V-650 . . . . . . . . . . . . . . . . . . . . . . . . 157
HSG-A1 . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 157
HSG-A2 . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 157
HSG-A3 . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 157
HSG-A4 . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 157
HSG-P1 . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 157
HSG-P2 . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 157
HSG-P3 . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 157
HSG-P7 . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 157
HST0.4-3-Q, HST0.4-48-5 . . . . . . . . . . . . . . 154
HST0.4-6-3 . . . . . . . . . . . . . . . . . . . . . . . . . . 154
HST0.4-6-X . . . . . . . . . . . . . . . . . . . . . . . . . . 154
HST0.8-6-3, HST0.8-6-X, HST0.8-9-X,
HST0.8-12-5, HST0.8-48-5 . . . . . . . . . . . . . . 154
HST1.1-6-3, HST1.1-6-X, HST1.1-9-2,
HST1.1-9-X, HST1.1-12-5, HST1.1-48-5 . . . 154
HST1.5-9-X, HST1.5-12-1, HST1.5-12-5,
HST1.5-48-5 . . . . . . . . . . . . . . . . . . . . . . . . . 154
HST2.0-9-5, HST2.0-12-2, HST2.0-48-2. . . . 154
HST3.0-12-2 . . . . . . . . . . . . . . . . . . . . . . . . . . 154
HST3.0-48-2 . . . . . . . . . . . . . . . . . . . . . . . . . 154
HSTT05-48-Q . . . . . . . . . . . . . . . . . . . . . . . . . 141
HSTT05-48-TL. . . . . . . . . . . . . . . . . . . . . . . . . 141
HSTT05-C . . . . . . . . . . . . . . . . . . . . . . . . . . . . 141
HSTT05-M . . . . . . . . . . . . . . . . . . . . . . . . . . . . 141
HSTT05-Q . . . . . . . . . . . . . . . . . . . . . . . . . . . . 143
HSTT06-48-Q . . . . . . . . . . . . . . . . . . . . . . . . . 141
HSTT06-48-TL. . . . . . . . . . . . . . . . . . . . . . . . . 141
HSTT06-C . . . . . . . . . . . . . . . . . . . . . . . . . . . . 141
HSTT06-M . . . . . . . . . . . . . . . . . . . . . . . . . . . . 141
HSTT06-Q . . . . . . . . . . . . . . . . . . . . . . . . . . . . 143
HSTT06-Y . . . . . . . . . . . . . . . . . . . . . . . . . . . . 143
HSTT06-YK1 . . . . . . . . . . . . . . . . . . . . . . . . . . 144
HSTT09-48-Q . . . . . . . . . . . . . . . . . . . . . . . . . 141
HSTT09-48-TL. . . . . . . . . . . . . . . . . . . . . . . . . 141
HSTT09-C . . . . . . . . . . . . . . . . . . . . . . . . . . . . 141
HSTT09-M . . . . . . . . . . . . . . . . . . . . . . . . . . . . 141
HSTT09-Q . . . . . . . . . . . . . . . . . . . . . . . . . . . . 143
HSTT09-Y . . . . . . . . . . . . . . . . . . . . . . . . . . . . 143
HSTT09-YK1 . . . . . . . . . . . . . . . . . . . . . . . . . . 144
HSTT12-48-Q . . . . . . . . . . . . . . . . . . . . . . . . . 141
HSTT12-48-TL. . . . . . . . . . . . . . . . . . . . . . . . . 141
HSTT12-C . . . . . . . . . . . . . . . . . . . . . . . . . . . . 141
HSTT12-M . . . . . . . . . . . . . . . . . . . . . . . . . . . . 141
HSTT12-Q . . . . . . . . . . . . . . . . . . . . . . . . . . . . 143
HSTT12-Y . . . . . . . . . . . . . . . . . . . . . . . . . . . . 143
HSTT12-YK1 . . . . . . . . . . . . . . . . . . . . . . . . . . 144
HSTT19-48-Q . . . . . . . . . . . . . . . . . . . . . . . . . 141
HSTT19-48-TL. . . . . . . . . . . . . . . . . . . . . . . . . 141
HSTT19-C . . . . . . . . . . . . . . . . . . . . . . . . . . . . 141
HSTT19-M . . . . . . . . . . . . . . . . . . . . . . . . . . . . 141
HSTT19-Q . . . . . . . . . . . . . . . . . . . . . . . . . . . . 143
HSTT19-Y . . . . . . . . . . . . . . . . . . . . . . . . . . . . 143
HSTT19-YK1 . . . . . . . . . . . . . . . . . . . . . . . . . . 144
HSTT25-48-Q . . . . . . . . . . . . . . . . . . . . . . . . . 142
HSTT25-48-TL. . . . . . . . . . . . . . . . . . . . . . . . . 142
HSTT25-C . . . . . . . . . . . . . . . . . . . . . . . . . . . . 142
HSTT25-D . . . . . . . . . . . . . . . . . . . . . . . . . . . . 142
HSTT25-Q . . . . . . . . . . . . . . . . . . . . . . . . . . . . 143
HSTT25-Y . . . . . . . . . . . . . . . . . . . . . . . . . . . . 143
HSTT25-YK1 . . . . . . . . . . . . . . . . . . . . . . . . . . 144
HSTT38-48-Q . . . . . . . . . . . . . . . . . . . . . . . . . 142
HSTT38-48-TL. . . . . . . . . . . . . . . . . . . . . . . . . 142
HSTT38-C . . . . . . . . . . . . . . . . . . . . . . . . . . . . 142
HSTT38-Q . . . . . . . . . . . . . . . . . . . . . . . . . . . . 143
HSTT38-T . . . . . . . . . . . . . . . . . . . . . . . . . . . . 142
HSTT38-Y . . . . . . . . . . . . . . . . . . . . . . . . . . . . 143
HSTT38-YK1 . . . . . . . . . . . . . . . . . . . . . . . . . . 144
HSTT50-48-Q . . . . . . . . . . . . . . . . . . . . . . . . . 142
HSTT50-48-T. . . . . . . . . . . . . . . . . . . . . . . . . . 142
HSTT50-C . . . . . . . . . . . . . . . . . . . . . . . . . . . . 142
HSTT50-Q . . . . . . . . . . . . . . . . . . . . . . . . . . . . 143
HSTT50-T . . . . . . . . . . . . . . . . . . . . . . . . . . . . 142
HSTT50-Y . . . . . . . . . . . . . . . . . . . . . . . . . . . . 143
HSTT50-YK1 . . . . . . . . . . . . . . . . . . . . . . . . . . 144
HSTT75-48-5. . . . . . . . . . . . . . . . . . . . . . . . . . 142
HSTT75-48-CQ . . . . . . . . . . . . . . . . . . . . . . . . 142
HSTT75-C . . . . . . . . . . . . . . . . . . . . . . . . . . . . 142
HSTT75-Q . . . . . . . . . . . . . . . . . . . . . . . . . . . . 143
HSTT75-T . . . . . . . . . . . . . . . . . . . . . . . . . . . . 142
HSTT75-Y . . . . . . . . . . . . . . . . . . . . . . . . . . . . 143
HSTT75-YK1 . . . . . . . . . . . . . . . . . . . . . . . . . . 144
HSTT100-48-5. . . . . . . . . . . . . . . . . . . . . . . . . 142
HSTT100-48-LQ . . . . . . . . . . . . . . . . . . . . . . . 142
HSTT100-C . . . . . . . . . . . . . . . . . . . . . . . . . . . 142
Alphanumeric Part Number Index
Part Number
Page
Number
HSTT100-Y . . . . . . . . . . . . . . . . . . . . . . . . . . . 143
HSTT100-YK1 . . . . . . . . . . . . . . . . . . . . . . . . . 144
HSTT150-48-5. . . . . . . . . . . . . . . . . . . . . . . . . 142
HSTT150-C . . . . . . . . . . . . . . . . . . . . . . . . . . . 142
HSTT200-48-5. . . . . . . . . . . . . . . . . . . . . . . . . 142
HSTT200-L . . . . . . . . . . . . . . . . . . . . . . . . . . . 142
HSTT300-48-2. . . . . . . . . . . . . . . . . . . . . . . . . 142
HSTT300-L . . . . . . . . . . . . . . . . . . . . . . . . . . . 142
HSTT400-48-2. . . . . . . . . . . . . . . . . . . . . . . . . 142
HSTT400-L . . . . . . . . . . . . . . . . . . . . . . . . . . . 142
HSTTA19-48-Q . . . . . . . . . . . . . . . . . . . . . . . . 152
HSTTA19-Y . . . . . . . . . . . . . . . . . . . . . . . . . . . 152
HSTTA25-48-Q . . . . . . . . . . . . . . . . . . . . . . . . 152
HSTTA25-48-TL . . . . . . . . . . . . . . . . . . . . . . . 152
HSTTA25-Y . . . . . . . . . . . . . . . . . . . . . . . . . . . 152
HSTTA38-48-Q . . . . . . . . . . . . . . . . . . . . . . . . 152
HSTTA38-48-TL . . . . . . . . . . . . . . . . . . . . . . . 152
HSTTA38-Y . . . . . . . . . . . . . . . . . . . . . . . . . . . 152
HSTTA50-48-5 . . . . . . . . . . . . . . . . . . . . . . . . 152
HSTTA50-48-T . . . . . . . . . . . . . . . . . . . . . . . . 152
HSTTA50-Y . . . . . . . . . . . . . . . . . . . . . . . . . . . 152
HSTTA75-48-5 . . . . . . . . . . . . . . . . . . . . . . . . 152
HSTTA75-48-C . . . . . . . . . . . . . . . . . . . . . . . . 152
HSTTA75-Y . . . . . . . . . . . . . . . . . . . . . . . . . . . 152
HSTTA100-48-5 . . . . . . . . . . . . . . . . . . . . . . . 152
HSTTA100-48-L . . . . . . . . . . . . . . . . . . . . . . . 152
HSTTA100-Y . . . . . . . . . . . . . . . . . . . . . . . . . . 152
HSTTA150-48-5 . . . . . . . . . . . . . . . . . . . . . . . 152
HSTTA150-48-Q . . . . . . . . . . . . . . . . . . . . . . . 152
HSTTA150-Y . . . . . . . . . . . . . . . . . . . . . . . . . . 152
HSTTK05-48-Q . . . . . . . . . . . . . . . . . . . . . . . . 150
HSTTK06-48-Q . . . . . . . . . . . . . . . . . . . . . . . . 150
HSTTK09-48-Q . . . . . . . . . . . . . . . . . . . . . . . . 150
HSTTK12-48-Q . . . . . . . . . . . . . . . . . . . . . . . . 150
HSTTK19-48-Q . . . . . . . . . . . . . . . . . . . . . . . . 150
HSTTK25-48-Q . . . . . . . . . . . . . . . . . . . . . . . . 150
HSTTK38-48-Q . . . . . . . . . . . . . . . . . . . . . . . . 150
HSTTK50-48-5 . . . . . . . . . . . . . . . . . . . . . . . . 150
HSTTK75-48-5 . . . . . . . . . . . . . . . . . . . . . . . . 150
HSTTK100-48-5 . . . . . . . . . . . . . . . . . . . . . . . 150
HSTTN25-C . . . . . . . . . . . . . . . . . . . . . . . . . . . 148
HSTTN38-C . . . . . . . . . . . . . . . . . . . . . . . . . . . 148
HSTTN50-C . . . . . . . . . . . . . . . . . . . . . . . . . . . 148
HSTTN63-C . . . . . . . . . . . . . . . . . . . . . . . . . . . 148
HSTTN75-C . . . . . . . . . . . . . . . . . . . . . . . . . . . 148
HSTTN88-C . . . . . . . . . . . . . . . . . . . . . . . . . . . 148
HSTTN100-C . . . . . . . . . . . . . . . . . . . . . . . . . . 148
HSTTN125-C . . . . . . . . . . . . . . . . . . . . . . . . . . 148
HSTTN150-C . . . . . . . . . . . . . . . . . . . . . . . . . . 148
HSTTN175-C . . . . . . . . . . . . . . . . . . . . . . . . . . 148
HSTTN200-Q. . . . . . . . . . . . . . . . . . . . . . . . . . 148
HSTTN300-Q. . . . . . . . . . . . . . . . . . . . . . . . . . 148
HSTTP05-C . . . . . . . . . . . . . . . . . . . . . . . . . . . 147
HSTTP05-M. . . . . . . . . . . . . . . . . . . . . . . . . . . 147
HSTTP05-Q . . . . . . . . . . . . . . . . . . . . . . . . . . . 147
HSTTP06-C . . . . . . . . . . . . . . . . . . . . . . . . . . . 147
HSTTP06-M. . . . . . . . . . . . . . . . . . . . . . . . . . . 147
HSTTP06-Q . . . . . . . . . . . . . . . . . . . . . . . . . . . 147
HSTTP09-C . . . . . . . . . . . . . . . . . . . . . . . . . . . 147
HSTTP09-M. . . . . . . . . . . . . . . . . . . . . . . . . . . 147
HSTTP09-Q . . . . . . . . . . . . . . . . . . . . . . . . . . . 147
HSTTP12-C . . . . . . . . . . . . . . . . . . . . . . . . . . . 147
HSTTP12-M. . . . . . . . . . . . . . . . . . . . . . . . . . . 147
HSTTP12-Q . . . . . . . . . . . . . . . . . . . . . . . . . . . 147
HSTTP19-C . . . . . . . . . . . . . . . . . . . . . . . . . . . 147
HSTTP19-M. . . . . . . . . . . . . . . . . . . . . . . . . . . 147
HSTTP19-Q . . . . . . . . . . . . . . . . . . . . . . . . . . . 147
HSTTP25-C . . . . . . . . . . . . . . . . . . . . . . . . . . . 147
HSTTP25-D . . . . . . . . . . . . . . . . . . . . . . . . . . . 147
HSTTP25-Q . . . . . . . . . . . . . . . . . . . . . . . . . . . 147
HSTTP38-C . . . . . . . . . . . . . . . . . . . . . . . . . . . 147
HSTTP38-Q . . . . . . . . . . . . . . . . . . . . . . . . . . . 147
HSTTP38-T . . . . . . . . . . . . . . . . . . . . . . . . . . . 147
HSTTP50-C . . . . . . . . . . . . . . . . . . . . . . . . . . . 147
HSTTP50-Q . . . . . . . . . . . . . . . . . . . . . . . . . . . 147
HSTTP75-C . . . . . . . . . . . . . . . . . . . . . . . . . . . 147
HSTTP75-Q . . . . . . . . . . . . . . . . . . . . . . . . . . . 147
HSTTP100-C . . . . . . . . . . . . . . . . . . . . . . . . . . 147
HSTTP100-Q. . . . . . . . . . . . . . . . . . . . . . . . . . 147
HSTTP150-C . . . . . . . . . . . . . . . . . . . . . . . . . . 147
HSTTP150-Q. . . . . . . . . . . . . . . . . . . . . . . . . . 147
HSTTP200-Q. . . . . . . . . . . . . . . . . . . . . . . . . . 147
HSTTRA12-48-Q . . . . . . . . . . . . . . . . . . . . . . . 153
HSTTRA19-48-Q . . . . . . . . . . . . . . . . . . . . . . . 153
HSTTRA25-48-Q . . . . . . . . . . . . . . . . . . . . . . . 153
HSTTRA38-48-Q . . . . . . . . . . . . . . . . . . . . . . . 153
HSTTRA50-48-5 . . . . . . . . . . . . . . . . . . . . . . . 153
HSTTRA75-48-5 . . . . . . . . . . . . . . . . . . . . . . . 153
HSTTRA100-48-5 . . . . . . . . . . . . . . . . . . . . . . 153
HSTTT03-48-Q . . . . . . . . . . . . . . . . . . . . . . . . 149
HSTTT04-48-Q . . . . . . . . . . . . . . . . . . . . . . . . 149
HSTTT05-48-Q . . . . . . . . . . . . . . . . . . . . . . . . 149
HSTTT06-48-Q . . . . . . . . . . . . . . . . . . . . . . . . 149
HSTTT08-48-Q . . . . . . . . . . . . . . . . . . . . . . . . 149
Part Number
Page
Number
HSTTT09-48-Q . . . . . . . . . . . . . . . . . . . . . . . .
HSTTT046-48-Q . . . . . . . . . . . . . . . . . . . . . . .
HSTTT055-48-Q . . . . . . . . . . . . . . . . . . . . . . .
HSTTT12-48-Q . . . . . . . . . . . . . . . . . . . . . . . .
HSTTT15-48-Q . . . . . . . . . . . . . . . . . . . . . . . .
HSTTT19-48-Q . . . . . . . . . . . . . . . . . . . . . . . .
HSTTT24-48-Q . . . . . . . . . . . . . . . . . . . . . . . .
HSTTT30-48-Q . . . . . . . . . . . . . . . . . . . . . . . .
HSTTT37-48-Q . . . . . . . . . . . . . . . . . . . . . . . .
HSTTT43-48-Q . . . . . . . . . . . . . . . . . . . . . . . .
HSTTT47-48-Q . . . . . . . . . . . . . . . . . . . . . . . .
HSTTT56-48-5 . . . . . . . . . . . . . . . . . . . . . . . .
HSTTT66-48-5 . . . . . . . . . . . . . . . . . . . . . . . .
HSTTT75-48-5 . . . . . . . . . . . . . . . . . . . . . . . .
HSTTT93-48-5 . . . . . . . . . . . . . . . . . . . . . . . .
HSTTT112-48-5 . . . . . . . . . . . . . . . . . . . . . . .
HSTTT131-48-2 . . . . . . . . . . . . . . . . . . . . . . .
HSTTT150-48-2 . . . . . . . . . . . . . . . . . . . . . . .
HSTTV05-48-Q . . . . . . . . . . . . . . . . . . . . . . . .
HSTTV05-48-TL . . . . . . . . . . . . . . . . . . . . . . .
HSTTV05-C. . . . . . . . . . . . . . . . . . . . . . . . . . .
HSTTV05-M . . . . . . . . . . . . . . . . . . . . . . . . . .
HSTTV05-M2 . . . . . . . . . . . . . . . . . . . . . . . . .
HSTTV05-M4 . . . . . . . . . . . . . . . . . . . . . . . . .
HSTTV05-M6 . . . . . . . . . . . . . . . . . . . . . . . . .
HSTTV05-Q. . . . . . . . . . . . . . . . . . . . . . . . . . .
HSTTV05-Y . . . . . . . . . . . . . . . . . . . . . . . . . . .
HSTTV06-48-Q . . . . . . . . . . . . . . . . . . . . . . . .
HSTTV06-48-TL . . . . . . . . . . . . . . . . . . . . . . .
HSTTV06-C. . . . . . . . . . . . . . . . . . . . . . . . . . .
HSTTV06-M . . . . . . . . . . . . . . . . . . . . . . . . . .
HSTTV06-M2 . . . . . . . . . . . . . . . . . . . . . . . . .
HSTTV06-M4 . . . . . . . . . . . . . . . . . . . . . . . . .
HSTTV06-M6 . . . . . . . . . . . . . . . . . . . . . . . . .
HSTTV06-Q. . . . . . . . . . . . . . . . . . . . . . . . . . .
HSTTV06-Y . . . . . . . . . . . . . . . . . . . . . . . . . . .
HSTTV09-48-Q . . . . . . . . . . . . . . . . . . . . . . . .
HSTTV09-48-TL . . . . . . . . . . . . . . . . . . . . . . .
HSTTV09-C. . . . . . . . . . . . . . . . . . . . . . . . . . .
HSTTV09-M . . . . . . . . . . . . . . . . . . . . . . . . . .
HSTTV09-M2 . . . . . . . . . . . . . . . . . . . . . . . . .
HSTTV09-M4 . . . . . . . . . . . . . . . . . . . . . . . . .
HSTTV09-M6 . . . . . . . . . . . . . . . . . . . . . . . . .
HSTTV09-Q. . . . . . . . . . . . . . . . . . . . . . . . . . .
HSTTV09-Y . . . . . . . . . . . . . . . . . . . . . . . . . . .
HSTTV12-48-Q . . . . . . . . . . . . . . . . . . . . . . . .
HSTTV12-48-TL . . . . . . . . . . . . . . . . . . . . . . .
HSTTV12-C. . . . . . . . . . . . . . . . . . . . . . . . . . .
HSTTV12-M . . . . . . . . . . . . . . . . . . . . . . . . . .
HSTTV12-M2 . . . . . . . . . . . . . . . . . . . . . . . . .
HSTTV12-M4 . . . . . . . . . . . . . . . . . . . . . . . . .
HSTTV12-M6 . . . . . . . . . . . . . . . . . . . . . . . . .
HSTTV12-Q. . . . . . . . . . . . . . . . . . . . . . . . . . .
HSTTV12-Y . . . . . . . . . . . . . . . . . . . . . . . . . . .
HSTTV19-48-Q . . . . . . . . . . . . . . . . . . . . . . . .
HSTTV19-48-TL . . . . . . . . . . . . . . . . . . . . . . .
HSTTV19-C. . . . . . . . . . . . . . . . . . . . . . . . . . .
HSTTV19-M . . . . . . . . . . . . . . . . . . . . . . . . . .
HSTTV19-M2 . . . . . . . . . . . . . . . . . . . . . . . . .
HSTTV19-M4 . . . . . . . . . . . . . . . . . . . . . . . . .
HSTTV19-M6 . . . . . . . . . . . . . . . . . . . . . . . . .
HSTTV19-Q. . . . . . . . . . . . . . . . . . . . . . . . . . .
HSTTV19-Y . . . . . . . . . . . . . . . . . . . . . . . . . . .
HSTTV25-48-Q . . . . . . . . . . . . . . . . . . . . . . . .
HSTTV25-48-TL . . . . . . . . . . . . . . . . . . . . . . .
HSTTV25-C. . . . . . . . . . . . . . . . . . . . . . . . . . .
HSTTV25-D. . . . . . . . . . . . . . . . . . . . . . . . . . .
HSTTV25-D2. . . . . . . . . . . . . . . . . . . . . . . . . .
HSTTV25-D4. . . . . . . . . . . . . . . . . . . . . . . . . .
HSTTV25-D6. . . . . . . . . . . . . . . . . . . . . . . . . .
HSTTV25-Q. . . . . . . . . . . . . . . . . . . . . . . . . . .
HSTTV25-Y . . . . . . . . . . . . . . . . . . . . . . . . . . .
HSTTV38-48-Q . . . . . . . . . . . . . . . . . . . . . . . .
HSTTV38-48-TL . . . . . . . . . . . . . . . . . . . . . . .
HSTTV38-C. . . . . . . . . . . . . . . . . . . . . . . . . . .
HSTTV38-Q. . . . . . . . . . . . . . . . . . . . . . . . . . .
HSTTV38-T . . . . . . . . . . . . . . . . . . . . . . . . . . .
HSTTV38-T2 . . . . . . . . . . . . . . . . . . . . . . . . . .
HSTTV38-T4 . . . . . . . . . . . . . . . . . . . . . . . . . .
HSTTV38-T6 . . . . . . . . . . . . . . . . . . . . . . . . . .
HSTTV38-Y . . . . . . . . . . . . . . . . . . . . . . . . . . .
HSTTV50-48-Q . . . . . . . . . . . . . . . . . . . . . . . .
HSTTV50-48-T . . . . . . . . . . . . . . . . . . . . . . . .
HSTTV50-C. . . . . . . . . . . . . . . . . . . . . . . . . . .
HSTTV50-Q. . . . . . . . . . . . . . . . . . . . . . . . . . .
HSTTV50-T . . . . . . . . . . . . . . . . . . . . . . . . . . .
HSTTV50-T2 . . . . . . . . . . . . . . . . . . . . . . . . . .
HSTTV50-T4 . . . . . . . . . . . . . . . . . . . . . . . . . .
HSTTV50-T6 . . . . . . . . . . . . . . . . . . . . . . . . . .
HSTTV50-Y . . . . . . . . . . . . . . . . . . . . . . . . . . .
HSTTV75-48-5 . . . . . . . . . . . . . . . . . . . . . . . .
HSTTV75-48-CQ. . . . . . . . . . . . . . . . . . . . . . .
HSTTV75-C. . . . . . . . . . . . . . . . . . . . . . . . . . .
HSTTV75-Q. . . . . . . . . . . . . . . . . . . . . . . . . . .
149
149
149
149
149
149
149
149
149
149
149
149
149
149
149
149
149
149
145
145
145
146
146
146
146
146
146
145
145
145
146
146
146
146
146
146
145
145
145
146
146
146
146
146
146
145
145
145
146
146
146
146
146
146
145
145
145
146
146
146
146
146
146
145
145
145
146
146
146
146
146
146
145
145
145
146
146
146
146
146
146
145
145
145
146
146
146
146
146
146
145
145
145
146
Page
Number
Part Number
HSTTV75-T. . . . . . . . . . . . . . . . . . . . . . . . . . . 146
HSTTV75-T2. . . . . . . . . . . . . . . . . . . . . . . . . . 146
HSTTV75-T4. . . . . . . . . . . . . . . . . . . . . . . . . . 146
HSTTV75-T6. . . . . . . . . . . . . . . . . . . . . . . . . . 146
HSTTV75-Y. . . . . . . . . . . . . . . . . . . . . . . . . . . 146
HSTTV100-48-5 . . . . . . . . . . . . . . . . . . . . . . . 145
HSTTV100-48-LQ . . . . . . . . . . . . . . . . . . . . . . 145
HSTTV100-C . . . . . . . . . . . . . . . . . . . . . . . . . 145
HSTTV100-Q . . . . . . . . . . . . . . . . . . . . . . . . . 146
HSTTV100-Y. . . . . . . . . . . . . . . . . . . . . . . . . . 146
HSTTV150-48-5 . . . . . . . . . . . . . . . . . . . . . . . 145
HSTTV150-C . . . . . . . . . . . . . . . . . . . . . . . . . 145
HSTTVA12-48-Q. . . . . . . . . . . . . . . . . . . . . . . 151
HSTTVA12-Y . . . . . . . . . . . . . . . . . . . . . . . . . 151
HSTTVA19-48-Q. . . . . . . . . . . . . . . . . . . . . . . 151
HSTTVA19-Y . . . . . . . . . . . . . . . . . . . . . . . . . 151
HSTTVA25-48-Q. . . . . . . . . . . . . . . . . . . . . . . 151
HSTTVA25-Y . . . . . . . . . . . . . . . . . . . . . . . . . 151
HSTTVA38-48-Q. . . . . . . . . . . . . . . . . . . . . . . 151
HSTTVA38-Y . . . . . . . . . . . . . . . . . . . . . . . . . 151
HSTTVA50-48-5 . . . . . . . . . . . . . . . . . . . . . . . 151
HSTTVA50-Y . . . . . . . . . . . . . . . . . . . . . . . . . 151
HSTTVA75-48-5 . . . . . . . . . . . . . . . . . . . . . . . 151
HSTTVA75-Y . . . . . . . . . . . . . . . . . . . . . . . . . 151
HSTTVA100-48-5 . . . . . . . . . . . . . . . . . . . . . . 151
HSTTVA100-Y . . . . . . . . . . . . . . . . . . . . . . . . 151
HSTTVA150-48-5 . . . . . . . . . . . . . . . . . . . . . . 151
HSTT-YK1. . . . . . . . . . . . . . . . . . . . . . . . . . . . 144
HSTT-YK1-45 . . . . . . . . . . . . . . . . . . . . . . . . . 144
HSTT-YK2. . . . . . . . . . . . . . . . . . . . . . . . . . . . 144
HSTT-YK2-45 . . . . . . . . . . . . . . . . . . . . . . . . . 144
HTMT . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 78
HWS2819-C . . . . . . . . . . . . . . . . . . . . . . . . . . 121
I
ILT1M-M . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
ILT1.5I-M. . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
ILT2S-M . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
ILT3S-M . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
ILT4LH-TL. . . . . . . . . . . . . . . . . . . . . . . . . . . . .
ILT4S-M . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
ILT6LH-C . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
IMP094 . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
IMP125 . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
IMP187 . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
IMP-FIX. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
IT9100-C0 . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
IT9100-CUV2 . . . . . . . . . . . . . . . . . . . . . . . . . .
IT9100-CUV4 . . . . . . . . . . . . . . . . . . . . . . . . . .
IT9100-CUV4A . . . . . . . . . . . . . . . . . . . . . . . . .
IT9100-CUV5A . . . . . . . . . . . . . . . . . . . . . . . . .
IT9100-CUV5B . . . . . . . . . . . . . . . . . . . . . . . . .
IT9100-CUV6 . . . . . . . . . . . . . . . . . . . . . . . . . .
IT9100-CUV6A . . . . . . . . . . . . . . . . . . . . . . . . .
IT9100-CUV6B . . . . . . . . . . . . . . . . . . . . . . . . .
IT9100-CUV7A . . . . . . . . . . . . . . . . . . . . . . . . .
IT9100-CUV8 . . . . . . . . . . . . . . . . . . . . . . . . . .
IT9100-CUV11 . . . . . . . . . . . . . . . . . . . . . . . . .
IT9100-CUV16B . . . . . . . . . . . . . . . . . . . . . . . .
IT9115-C0 . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
IT9115-CUV2 . . . . . . . . . . . . . . . . . . . . . . . . . .
IT9115-CUV4 . . . . . . . . . . . . . . . . . . . . . . . . . .
IT9115-CUV4A . . . . . . . . . . . . . . . . . . . . . . . . .
IT9115-CUV5A . . . . . . . . . . . . . . . . . . . . . . . . .
IT9115-CUV5B . . . . . . . . . . . . . . . . . . . . . . . . .
IT9115-CUV6 . . . . . . . . . . . . . . . . . . . . . . . . . .
IT9115-CUV6A . . . . . . . . . . . . . . . . . . . . . . . . .
IT9115-CUV6B . . . . . . . . . . . . . . . . . . . . . . . . .
IT9115-CUV7A . . . . . . . . . . . . . . . . . . . . . . . . .
IT9115-CUV8 . . . . . . . . . . . . . . . . . . . . . . . . . .
IT9115-CUV11 . . . . . . . . . . . . . . . . . . . . . . . . .
IT9115-CUV16B . . . . . . . . . . . . . . . . . . . . . . . .
IT9150-C0 . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
IT9250-C0 . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
IT940-C0 . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
IT965-C0 . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
37
37
37
37
37
37
37
79
79
79
79
38
38
38
38
38
38
38
38
38
38
38
38
38
38
38
38
38
38
38
38
38
38
38
38
38
38
38
38
38
38
K
K-205 . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
K2-BLD2 . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
K4H-BLD. . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
K4M-BLD . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
K4MTG . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
K-504 . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
KB-550 . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
KB-551 . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
KGTHBLD . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
KGTHTL . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
KGTSBLD . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
KGTSTL . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
KIMS-H366-C2 . . . . . . . . . . . . . . . . . . . . . . . . .
KIMS-H430-C6 . . . . . . . . . . . . . . . . . . . . . . . . .
KIMS-H500-C4 . . . . . . . . . . . . . . . . . . . . . . . . .
KP-506A . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
KP-506A-0 . . . . . . . . . . . . . . . . . . . . . . . . . . . .
Most commonly used parts appear in BOLD.
54
59
59
78
78
54
54
54
59
59
59
59
94
94
94
54
54
189
Alphanumeric Part Number Index
Page
Number
Part Number
KP-509 . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 54
KPPTEHB. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 59
KPPTEHG . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 59
KPTSG . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 59
KPTSTL . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 59
KST2EHG. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 59
KT2MG . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 78
L
LC3-A-C8 . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 113
LC5-A-C8 . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 113
LC10-A-L8 . . . . . . . . . . . . . . . . . . . . . . . . . . . . 113
LHMS-S10-D . . . . . . . . . . . . . . . . . . . . . . . . . . . 96
LHMS-S5-D . . . . . . . . . . . . . . . . . . . . . . . . . . . .96
LHMS-S6-D . . . . . . . . . . . . . . . . . . . . . . . . . . . .96
LPFCM14-A-C14 . . . . . . . . . . . . . . . . . . . . . . .114
LPFCM22-A-C14 . . . . . . . . . . . . . . . . . . . . . . .114
LPFCM34-A-C14 . . . . . . . . . . . . . . . . . . . . . . .114
LPMM-S2-C . . . . . . . . . . . . . . . . . . . . . . . . . . . .94
LPMM-S5-C . . . . . . . . . . . . . . . . . . . . . . . . . . . .94
LPMS-S8-C. . . . . . . . . . . . . . . . . . . . . . . . . . . 94
LWC19-A-C . . . . . . . . . . . . . . . . . . . . . . . . . . .111
LWC19-A-C14 . . . . . . . . . . . . . . . . . . . . . . . . . 111
LWC19-A-C20 . . . . . . . . . . . . . . . . . . . . . . . . . 111
LWC19-H25-C . . . . . . . . . . . . . . . . . . . . . . . . . 111
LWC19-H25-C14 . . . . . . . . . . . . . . . . . . . . . . .111
LWC19-H25-C20 . . . . . . . . . . . . . . . . . . . . . . .111
LWC25-A-C . . . . . . . . . . . . . . . . . . . . . . . . . . .111
LWC25-A-C14 . . . . . . . . . . . . . . . . . . . . . . . . . 111
LWC25-A-C20 . . . . . . . . . . . . . . . . . . . . . . . . . 111
LWC25-H25-C . . . . . . . . . . . . . . . . . . . . . . . . . 111
LWC25-H25-C14 . . . . . . . . . . . . . . . . . . . . . . .111
LWC25-H25-C20 . . . . . . . . . . . . . . . . . . . . . . .111
LWC38-A-C . . . . . . . . . . . . . . . . . . . . . . . . . . .111
LWC38-A-C14 . . . . . . . . . . . . . . . . . . . . . . . . . 111
LWC38-A-C20 . . . . . . . . . . . . . . . . . . . . . . . . . 111
LWC38-H25-C . . . . . . . . . . . . . . . . . . . . . . . . . 111
LWC38-H25-C14 . . . . . . . . . . . . . . . . . . . . . . .111
LWC38-H25-C20 . . . . . . . . . . . . . . . . . . . . . . .111
LWC50-A-L. . . . . . . . . . . . . . . . . . . . . . . . . . . .111
LWC50-A-L14. . . . . . . . . . . . . . . . . . . . . . . . . . 111
LWC50-A-L20. . . . . . . . . . . . . . . . . . . . . . . . . . 111
LWC50-H25-L. . . . . . . . . . . . . . . . . . . . . . . . . . 111
LWC50-H25-L14. . . . . . . . . . . . . . . . . . . . . . . .111
LWC50-H25-L20. . . . . . . . . . . . . . . . . . . . . . . .111
LWC75-A-L. . . . . . . . . . . . . . . . . . . . . . . . . . . .111
LWC75-A-L14. . . . . . . . . . . . . . . . . . . . . . . . . . 111
LWC75-A-L20. . . . . . . . . . . . . . . . . . . . . . . . . . 111
LWC75-H25-L. . . . . . . . . . . . . . . . . . . . . . . . . . 111
LWC75-H25-L14. . . . . . . . . . . . . . . . . . . . . . . .111
LWC75-H25-L20. . . . . . . . . . . . . . . . . . . . . . . .111
LWC100-A-L. . . . . . . . . . . . . . . . . . . . . . . . . . . 111
LWC100-A-L14. . . . . . . . . . . . . . . . . . . . . . . . . 111
LWC100-A-L20. . . . . . . . . . . . . . . . . . . . . . . . . 111
LWC100-H25-L. . . . . . . . . . . . . . . . . . . . . . . . . 111
LWC100-H25-L14. . . . . . . . . . . . . . . . . . . . . . .111
LWC100-H25-L20. . . . . . . . . . . . . . . . . . . . . . .111
M
MACC25-A-C . . . . . . . . . . . . . . . . . . . . . . . . . . 111
MACC62-A-C . . . . . . . . . . . . . . . . . . . . . . . . . . 111
MBH-MR . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 77
MBH-TLR . . . . . . . . . . . . . . . . . . . . . . . . . . . . 77
MBM-H25-Q . . . . . . . . . . . . . . . . . . . . . . . . . . . . 78
MBMS-S10-C . . . . . . . . . . . . . . . . . . . . . . . . . . . 97
MBS-MR . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 77
MBS-TLR . . . . . . . . . . . . . . . . . . . . . . . . . . . . 77
MCEH-S25-C0 . . . . . . . . . . . . . . . . . . . . . . . . . . 16
MCMS12-P-C . . . . . . . . . . . . . . . . . . . . . . . . . . . 97
MCMS25-P-C . . . . . . . . . . . . . . . . . . . . . . . . . . . 97
MCMS30-P-C . . . . . . . . . . . . . . . . . . . . . . . . . . . 97
MEHT . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .79
META-X . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 79
METS3-X . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 79
METS4-X . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 79
MLT1S-CP . . . . . . . . . . . . . . . . . . . . . . . . . . . 77
MLT2H-LP. . . . . . . . . . . . . . . . . . . . . . . . . . . . 77
MLT2LH-LP . . . . . . . . . . . . . . . . . . . . . . . . . . . .77
MLT2S-CP . . . . . . . . . . . . . . . . . . . . . . . . . . . 77
MLT2.7S-CP . . . . . . . . . . . . . . . . . . . . . . . . . . 77
MLT2.7WH-LP . . . . . . . . . . . . . . . . . . . . . . . . . . 77
MLT4H-LP. . . . . . . . . . . . . . . . . . . . . . . . . . . . 77
MLT4LH-LP . . . . . . . . . . . . . . . . . . . . . . . . . . . .77
MLT4S-CP . . . . . . . . . . . . . . . . . . . . . . . . . . . 77
MLT4WH-LP. . . . . . . . . . . . . . . . . . . . . . . . . . . . 77
MLT6H-LP. . . . . . . . . . . . . . . . . . . . . . . . . . . . 77
MLT6LH-LP . . . . . . . . . . . . . . . . . . . . . . . . . . . .77
MLT6S-CP . . . . . . . . . . . . . . . . . . . . . . . . . . . 77
MLT6WH-LP. . . . . . . . . . . . . . . . . . . . . . . . . . . . 77
MLT8H-LP. . . . . . . . . . . . . . . . . . . . . . . . . . . . 77
MLT8LH-LP . . . . . . . . . . . . . . . . . . . . . . . . . . . .77
MLT8S-CP . . . . . . . . . . . . . . . . . . . . . . . . . . . 77
MLT8WH-LP. . . . . . . . . . . . . . . . . . . . . . . . . . . . 77
MLT10H-LP. . . . . . . . . . . . . . . . . . . . . . . . . . . 77
190
Most commonly used parts appear in BOLD.
Page
Number
Part Number
MLT10WH-LP . . . . . . . . . . . . . . . . . . . . . . . . . . 77
MLT12H-Q . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 77
MLTC2H-LP316. . . . . . . . . . . . . . . . . . . . . . . . . 77
MLTC4H-LP316 . . . . . . . . . . . . . . . . . . . . . . . 77
MLTC6H-LP316. . . . . . . . . . . . . . . . . . . . . . . . . 77
MLTC8H-LP316. . . . . . . . . . . . . . . . . . . . . . . . . 77
MLTC10H-LP316 . . . . . . . . . . . . . . . . . . . . . . . . 77
MMP350-C. . . . . . . . . . . . . . . . . . . . . . . . . . . . . 78
MMP350H-C . . . . . . . . . . . . . . . . . . . . . . . . . . . 78
MMP350W38-C . . . . . . . . . . . . . . . . . . . . . . . . . 78
MP150-C . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 106
MP150-C0 . . . . . . . . . . . . . . . . . . . . . . . . . . . . 106
MP150KIT-Q . . . . . . . . . . . . . . . . . . . . . . . . . . 106
MP150-R . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 106
MP175-C . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 106
MP175-C0 . . . . . . . . . . . . . . . . . . . . . . . . . . . . 106
MP175-R . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 106
MP200-C . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 106
MP200-C0 . . . . . . . . . . . . . . . . . . . . . . . . . . . . 106
MP200-R . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 106
MP250-C . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 106
MP250-C0 . . . . . . . . . . . . . . . . . . . . . . . . . . . . 106
MP250-R . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 106
MP250KIT-Q . . . . . . . . . . . . . . . . . . . . . . . . . . 106
MP250W175-C. . . . . . . . . . . . . . . . . . . . . . . . . 106
MP350-C . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 106
MP350-C0 . . . . . . . . . . . . . . . . . . . . . . . . . . . . 106
MP350KIT-Q . . . . . . . . . . . . . . . . . . . . . . . . . . 106
MPMH38-L0. . . . . . . . . . . . . . . . . . . . . . . . . . . . 99
MPMS19-C0. . . . . . . . . . . . . . . . . . . . . . . . . . . . 99
MPMS25-C0. . . . . . . . . . . . . . . . . . . . . . . . . . . . 99
MPMWH32-L0 . . . . . . . . . . . . . . . . . . . . . . . . . . 99
MPWM-H56 . . . . . . . . . . . . . . . . . . . . . . . . . . . . 78
MS2W38T15-L4. . . . . . . . . . . . . . . . . . . . . . . . . 80
MS4W38T15-L4. . . . . . . . . . . . . . . . . . . . . . . . . 80
MS4W50T15-L4. . . . . . . . . . . . . . . . . . . . . . . . . 80
MS4W63T15-L4. . . . . . . . . . . . . . . . . . . . . . . . . 80
MS6W38T15-L4. . . . . . . . . . . . . . . . . . . . . . . . . 80
MS6W50T15-L4. . . . . . . . . . . . . . . . . . . . . . . . . 80
MS6W63T15-L4. . . . . . . . . . . . . . . . . . . . . . . . . 80
MS8W38T15-L4. . . . . . . . . . . . . . . . . . . . . . . . . 80
MS8W50T15-L4. . . . . . . . . . . . . . . . . . . . . . . . . 80
MS8W63T15-L4. . . . . . . . . . . . . . . . . . . . . . . . . 80
MS10W38T15-L4. . . . . . . . . . . . . . . . . . . . . . . . 80
MS10W50T15-L4. . . . . . . . . . . . . . . . . . . . . . . . 80
MS10W63T15-L4. . . . . . . . . . . . . . . . . . . . . . . . 80
MSBW38-C4 . . . . . . . . . . . . . . . . . . . . . . . . . . . 80
MSBW50-C4 . . . . . . . . . . . . . . . . . . . . . . . . . . . 80
MSBW63-C4 . . . . . . . . . . . . . . . . . . . . . . . . . . . 80
MSW38T15-CR4 . . . . . . . . . . . . . . . . . . . . . . . . 80
MSW50T15-CR4 . . . . . . . . . . . . . . . . . . . . . . . . 80
MSW63T15-CR4 . . . . . . . . . . . . . . . . . . . . . . . . 80
MTHH-C . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 77
MTHS-C . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 77
MTM1H10-C . . . . . . . . . . . . . . . . . . . . . . . . . . 78
MTM1H25-C. . . . . . . . . . . . . . . . . . . . . . . . . . . . 78
MTM1H-C . . . . . . . . . . . . . . . . . . . . . . . . . . . . 78
MTM2H-Q . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 78
MTMBH-Q . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 78
MTP1H-E6-C . . . . . . . . . . . . . . . . . . . . . . . . . . . 95
MTP1H-E10-C . . . . . . . . . . . . . . . . . . . . . . . . . . 95
MTP1S-E6-C . . . . . . . . . . . . . . . . . . . . . . . . . . . 95
MTP1S-E10-C . . . . . . . . . . . . . . . . . . . . . . . . . . 95
MTP2H-E6-C . . . . . . . . . . . . . . . . . . . . . . . . . . . 95
MTP2H-E10-C . . . . . . . . . . . . . . . . . . . . . . . . . . 95
MTP2S-E6-C . . . . . . . . . . . . . . . . . . . . . . . . . . . 95
MTP2S-E10-C . . . . . . . . . . . . . . . . . . . . . . . . . . 95
MTP3H-E6-C . . . . . . . . . . . . . . . . . . . . . . . . . . . 95
MTP3H-E10-C . . . . . . . . . . . . . . . . . . . . . . . . . . 95
MTP3S-E6-C . . . . . . . . . . . . . . . . . . . . . . . . . . . 95
MTP3S-E10-C . . . . . . . . . . . . . . . . . . . . . . . . . . 95
MTP4H-E6-C . . . . . . . . . . . . . . . . . . . . . . . . . . . 95
MTP4H-E10-C . . . . . . . . . . . . . . . . . . . . . . . . . . 95
MTP4S-E6-C . . . . . . . . . . . . . . . . . . . . . . . . . . . 95
MTP4S-E10-C . . . . . . . . . . . . . . . . . . . . . . . . . . 95
MTP5H-E6-C . . . . . . . . . . . . . . . . . . . . . . . . . . . 95
MTP5H-E10-C . . . . . . . . . . . . . . . . . . . . . . . . . . 95
MTP5S-E6-C . . . . . . . . . . . . . . . . . . . . . . . . . . . 95
MTP5S-E10-C . . . . . . . . . . . . . . . . . . . . . . . . . . 95
MTP6H-E6-C . . . . . . . . . . . . . . . . . . . . . . . . . . . 95
MTP6H-E10-C . . . . . . . . . . . . . . . . . . . . . . . . . . 95
MWK094 . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 79
MWK125 . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 79
MWK187 . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 79
P
PAT1M . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 55, 60
PAT1.5M . . . . . . . . . . . . . . . . . . . . . . . . . . . 55, 60
PATMBM . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 61
PBMS-H25-C . . . . . . . . . . . . . . . . . . . . . . . . . . . 98
PBMS-H25-C14 . . . . . . . . . . . . . . . . . . . . . . . . . 98
PBMS-H25-M0. . . . . . . . . . . . . . . . . . . . . . . . . . 98
PBMS-H25-M30. . . . . . . . . . . . . . . . . . . . . . . . . 98
PBSC1-X . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 128
Part Number
Page
Number
PBSC3-X . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 128
PBSC6-X . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 128
PBSC12-X . . . . . . . . . . . . . . . . . . . . . . . . . . . . 128
PC038-H25D-C0 . . . . . . . . . . . . . . . . . . . . . . . 116
PC050-H25D-C0 . . . . . . . . . . . . . . . . . . . . . . . 116
PC062-H25D-C0 . . . . . . . . . . . . . . . . . . . . . . . 116
PC075-H25D-C0 . . . . . . . . . . . . . . . . . . . . . . . 116
PC087-H25D-C0 . . . . . . . . . . . . . . . . . . . . . . . 116
PC100-H25D-C0 . . . . . . . . . . . . . . . . . . . . . . . 116
PC112-H25D-C0 . . . . . . . . . . . . . . . . . . . . . . . 116
PC125-H25D-C0 . . . . . . . . . . . . . . . . . . . . . . . 116
PCSH-B-CR. . . . . . . . . . . . . . . . . . . . . . . . . . . . 78
PCSS-B-CR. . . . . . . . . . . . . . . . . . . . . . . . . . . . 78
PDH10-37 . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 60
PDM. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 60
PFX-0. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 105
PFX-2. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 105
PHM1. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 60
PHM2. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 60
PHM3. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 60
PL283N1 . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 60
PL289N1 . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 58
PL2M2S-L . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 10
PL3B5EH-C0 . . . . . . . . . . . . . . . . . . . . . . . . . . . 47
PL3M2S-L . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 10
PLA2S-A-Q . . . . . . . . . . . . . . . . . . . . . . . . . . . . 87
PLB2S-C . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 47
PLB3S-C . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 47
PLB4H-TL . . . . . . . . . . . . . . . . . . . . . . . . . . . . 47
PLB4H-TL0. . . . . . . . . . . . . . . . . . . . . . . . . . . 47
PLB4S-C . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 47
PLC1M-S4-C. . . . . . . . . . . . . . . . . . . . . . . . . . . 9
PLC1M-S4-C0. . . . . . . . . . . . . . . . . . . . . . . . . 18
PLC1.5I-S8-C . . . . . . . . . . . . . . . . . . . . . . . . . . 9
PLC1.5I-S8-C0 . . . . . . . . . . . . . . . . . . . . . . . . 18
PLC2H-S25-L . . . . . . . . . . . . . . . . . . . . . . . . . . . 9
PLC2H-S25-TL0 . . . . . . . . . . . . . . . . . . . . . . . . 18
PLC2S-S10-C . . . . . . . . . . . . . . . . . . . . . . . . . . 9
PLC2S-S10-C0 . . . . . . . . . . . . . . . . . . . . . . . . 18
PLC2S-S6-C . . . . . . . . . . . . . . . . . . . . . . . . . . . . 9
PLC2S-S6-C0 . . . . . . . . . . . . . . . . . . . . . . . . . . 18
PLC3S-S10-C . . . . . . . . . . . . . . . . . . . . . . . . . . . 9
PLC3S-S10-C0 . . . . . . . . . . . . . . . . . . . . . . . . . 18
PLC4H-S25-L . . . . . . . . . . . . . . . . . . . . . . . . . . 9
PLC4H-S25-L0 . . . . . . . . . . . . . . . . . . . . . . . . 18
PLC4S-S10-C . . . . . . . . . . . . . . . . . . . . . . . . . . 9
PLC4S-S10-C0 . . . . . . . . . . . . . . . . . . . . . . . . 18
PLF1M-C. . . . . . . . . . . . . . . . . . . . . . . . . . . . . 10
PLF1MA-C . . . . . . . . . . . . . . . . . . . . . . . . . . . 10
PLF1MB-C . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 10
PLF1M-M69. . . . . . . . . . . . . . . . . . . . . . . . . . . . 20
PLM1M-C . . . . . . . . . . . . . . . . . . . . . . . . . . . . 10
PLM1M-M69 . . . . . . . . . . . . . . . . . . . . . . . . . . 20
PLM2M-C. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 10
PLM2S-C . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 10
PLM4S-C . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 10
PLP1S-C . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 13
PLP1.5I-M . . . . . . . . . . . . . . . . . . . . . . . . . . . . 13
PLP1.5S-M . . . . . . . . . . . . . . . . . . . . . . . . . . . . 13
PLP2S-C . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 13
PLST4HS25-TL300 . . . . . . . . . . . . . . . . . . . . . . 46
PLST30SC-D30. . . . . . . . . . . . . . . . . . . . . . . . . 46
PLST50SC-D30. . . . . . . . . . . . . . . . . . . . . . . . . 46
PLT.6SM-C . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 6
PLT.6SM-C0 . . . . . . . . . . . . . . . . . . . . . . . . . . . 14
PLT.7M-C . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 6
PLT1M-C . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 6
PLT1M-C0 . . . . . . . . . . . . . . . . . . . . . . . . . . . . 14
PLT1M-C702 . . . . . . . . . . . . . . . . . . . . . . . . . . . 22
PLT1M-C76 . . . . . . . . . . . . . . . . . . . . . . . . . . . 22
PLT1M-L0 . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 53
PLT1M-L1 . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 53
PLT1M-L1-0. . . . . . . . . . . . . . . . . . . . . . . . . . . . 53
PLT1M-L1-2. . . . . . . . . . . . . . . . . . . . . . . . . . . . 53
PLT1M-L1-4. . . . . . . . . . . . . . . . . . . . . . . . . . . . 53
PLT1M-L1-7. . . . . . . . . . . . . . . . . . . . . . . . . . . . 53
PLT1M-L1-10. . . . . . . . . . . . . . . . . . . . . . . . . . . 53
PLT1M-L2 . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 53
PLT1M-L3 . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 53
PLT1M-L3-0. . . . . . . . . . . . . . . . . . . . . . . . . . . . 53
PLT1M-L3-2. . . . . . . . . . . . . . . . . . . . . . . . . . . . 53
PLT1M-L3-4. . . . . . . . . . . . . . . . . . . . . . . . . . . . 53
PLT1M-L3-7. . . . . . . . . . . . . . . . . . . . . . . . . . . . 53
PLT1M-L3-10. . . . . . . . . . . . . . . . . . . . . . . . . . . 61
PLT1M-L4 . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 53
PLT1M-L5 . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 53
PLT1M-L5-0. . . . . . . . . . . . . . . . . . . . . . . . . . . . 53
PLT1M-L5-2. . . . . . . . . . . . . . . . . . . . . . . . . . . . 53
PLT1M-L5-4. . . . . . . . . . . . . . . . . . . . . . . . . . . . 53
PLT1M-L5-7. . . . . . . . . . . . . . . . . . . . . . . . . . . . 53
PLT1M-L5-10. . . . . . . . . . . . . . . . . . . . . . . . . . . 61
PLT1M-L6 . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 53
PLT1M-L6-0. . . . . . . . . . . . . . . . . . . . . . . . . . . . 53
Alphanumeric Part Number Index
Part Number
Page
Number
PLT1M-L6-2. . . . . . . . . . . . . . . . . . . . . . . . . . . . 53
PLT1M-L6-4. . . . . . . . . . . . . . . . . . . . . . . . . . . . 53
PLT1M-L6-7. . . . . . . . . . . . . . . . . . . . . . . . . . . . 53
PLT1M-L6-10. . . . . . . . . . . . . . . . . . . . . . . . . . . 61
PLT1M-L8 . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 53
PLT1M-L8-0. . . . . . . . . . . . . . . . . . . . . . . . . . . . 53
PLT1M-L8-2. . . . . . . . . . . . . . . . . . . . . . . . . . . . 53
PLT1M-L8-4. . . . . . . . . . . . . . . . . . . . . . . . . . . . 53
PLT1M-L8-7. . . . . . . . . . . . . . . . . . . . . . . . . . . . 53
PLT1M-L8-10. . . . . . . . . . . . . . . . . . . . . . . . . . . 53
PLT1M-M53 . . . . . . . . . . . . . . . . . . . . . . . . . . . . 23
PLT1M-M54 . . . . . . . . . . . . . . . . . . . . . . . . . . . . 23
PLT1M-M55 . . . . . . . . . . . . . . . . . . . . . . . . . . . . 23
PLT1M-M59 . . . . . . . . . . . . . . . . . . . . . . . . . . . . 23
PLT1M-M69 . . . . . . . . . . . . . . . . . . . . . . . . . . . 20
PLT1M-M100. . . . . . . . . . . . . . . . . . . . . . . . . . . 19
PLT1M-M109. . . . . . . . . . . . . . . . . . . . . . . . . . . 18
PLT1M-XMR . . . . . . . . . . . . . . . . . . . . . . . . . . . 61
PLT1M-XMR0 . . . . . . . . . . . . . . . . . . . . . . . . . . 61
PLT1M-XMR1 . . . . . . . . . . . . . . . . . . . . . . . . . . 61
PLT1M-XMR2 . . . . . . . . . . . . . . . . . . . . . . . . . . 61
PLT1M-XMR3 . . . . . . . . . . . . . . . . . . . . . . . . . . 61
PLT1M-XMR4 . . . . . . . . . . . . . . . . . . . . . . . . . . 61
PLT1M-XMR5 . . . . . . . . . . . . . . . . . . . . . . . . . . 61
PLT1M-XMR6 . . . . . . . . . . . . . . . . . . . . . . . . . . 61
PLT1M-XMR7 . . . . . . . . . . . . . . . . . . . . . . . . . . 61
PLT1M-XMR8 . . . . . . . . . . . . . . . . . . . . . . . . . . 61
PLT1M-XMR10 . . . . . . . . . . . . . . . . . . . . . . . . . 61
PLT1M-XMR30 . . . . . . . . . . . . . . . . . . . . . . . . . 61
PLT1S-C . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 6
PLT1S-C0 . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 14
PLT1.5I-C . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 6
PLT1.5I-C0 . . . . . . . . . . . . . . . . . . . . . . . . . . . . 14
PLT1.5I-M100 . . . . . . . . . . . . . . . . . . . . . . . . . . 19
PLT1.5I-M109 . . . . . . . . . . . . . . . . . . . . . . . . . . 18
PLT1.5I-M120 . . . . . . . . . . . . . . . . . . . . . . . . . . 21
PLT1.5I-M69 . . . . . . . . . . . . . . . . . . . . . . . . . . . 20
PLT1.5M-C . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 6
PLT1.5M-C0 . . . . . . . . . . . . . . . . . . . . . . . . . . . 14
PLT1.5M-XMR . . . . . . . . . . . . . . . . . . . . . . . . . . 61
PLT1.5M-XMR0 . . . . . . . . . . . . . . . . . . . . . . . . . 61
PLT1.5M-XMR30 . . . . . . . . . . . . . . . . . . . . . . . . 61
PLT1.5S-C . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 6
PLT1.5S-C0 . . . . . . . . . . . . . . . . . . . . . . . . . . . 14
PLT2EH-C . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 7
PLT2EH-Q0 . . . . . . . . . . . . . . . . . . . . . . . . . . . 15
PLT2H-L . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 7
PLT2H-LO . . . . . . . . . . . . . . . . . . . . . . . . . . . . 15
PLT2H-TL100 . . . . . . . . . . . . . . . . . . . . . . . . . . 19
PLT2H-TL109 . . . . . . . . . . . . . . . . . . . . . . . . . . 18
PLT2I-C . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 6
PLT2I-C0 . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 14
PLT2I-C76 . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 22
PLT2I-M53 . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 23
PLT2I-M54 . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 23
PLT2I-M55 . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 23
PLT2I-M59 . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 23
PLT2I-M69 . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 20
PLT2M-C . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 6
PLT2M-C0 . . . . . . . . . . . . . . . . . . . . . . . . . . . . 14
PLT2M-M69 . . . . . . . . . . . . . . . . . . . . . . . . . . . 20
PLT2S-C . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 6
PLT2S-C0 . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 14
PLT2S-C702 . . . . . . . . . . . . . . . . . . . . . . . . . . . 22
PLT2S-C76 . . . . . . . . . . . . . . . . . . . . . . . . . . . . 22
PLT2S-M53 . . . . . . . . . . . . . . . . . . . . . . . . . . . . 23
PLT2S-M54 . . . . . . . . . . . . . . . . . . . . . . . . . . . . 23
PLT2S-M55 . . . . . . . . . . . . . . . . . . . . . . . . . . . . 23
PLT2S-M59 . . . . . . . . . . . . . . . . . . . . . . . . . . . . 23
PLT2S-M69 . . . . . . . . . . . . . . . . . . . . . . . . . . . 20
PLT2S-M100 . . . . . . . . . . . . . . . . . . . . . . . . . . 19
PLT2S-M109 . . . . . . . . . . . . . . . . . . . . . . . . . . 18
PLT2S-M120 . . . . . . . . . . . . . . . . . . . . . . . . . . 21
PLT2.5H-L . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 7
PLT2.5H-L0 . . . . . . . . . . . . . . . . . . . . . . . . . . . . 15
PLT2.5I-C . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 6
PLT2.5I-C0 . . . . . . . . . . . . . . . . . . . . . . . . . . . . 14
PLT2.5S-C . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 6
PLT2.5S-C0 . . . . . . . . . . . . . . . . . . . . . . . . . . . . 14
PLT3H-L . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 7
PLT3H-L0 . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 15
PLT3H-L76 . . . . . . . . . . . . . . . . . . . . . . . . . . . . 22
PLT3H-TL100 . . . . . . . . . . . . . . . . . . . . . . . . . . 19
PLT3H-TL109 . . . . . . . . . . . . . . . . . . . . . . . . . . 18
PLT3I-C . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 6
PLT3I-C0 . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 14
PLT3S-C . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 6
PLT3S-C0 . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 14
PLT3S-C76 . . . . . . . . . . . . . . . . . . . . . . . . . . . . 22
PLT3S-C702 . . . . . . . . . . . . . . . . . . . . . . . . . . . 22
PLT3S-M53 . . . . . . . . . . . . . . . . . . . . . . . . . . . . 23
PLT3S-M54 . . . . . . . . . . . . . . . . . . . . . . . . . . . . 23
PLT3S-M55 . . . . . . . . . . . . . . . . . . . . . . . . . . . . 23
Part Number
Page
Number
PLT3S-M59 . . . . . . . . . . . . . . . . . . . . . . . . . . . . 23
PLT3S-M100. . . . . . . . . . . . . . . . . . . . . . . . . . .19
PLT3S-M109 . . . . . . . . . . . . . . . . . . . . . . . . . . . 18
PLT4H-L . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .7
PLT4H-L0 . . . . . . . . . . . . . . . . . . . . . . . . . . . . .15
PLT4H-L76 . . . . . . . . . . . . . . . . . . . . . . . . . . . .22
PLT4H-TL69 . . . . . . . . . . . . . . . . . . . . . . . . . . . 20
PLT4H-TL100 . . . . . . . . . . . . . . . . . . . . . . . . . .19
PLT4H-TL109 . . . . . . . . . . . . . . . . . . . . . . . . . . 18
PLT4H-TL120 . . . . . . . . . . . . . . . . . . . . . . . . . . 21
PLT4I-C . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .6
PLT4I-C0 . . . . . . . . . . . . . . . . . . . . . . . . . . . . .14
PLT4S-C . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .6
PLT4S-C0 . . . . . . . . . . . . . . . . . . . . . . . . . . . . .14
PLT4S-C76 . . . . . . . . . . . . . . . . . . . . . . . . . . . .22
PLT4S-M69. . . . . . . . . . . . . . . . . . . . . . . . . . . .20
PLT4S-M100 . . . . . . . . . . . . . . . . . . . . . . . . . . . 19
PLT4S-M109 . . . . . . . . . . . . . . . . . . . . . . . . . . . 18
PLT4S-M120 . . . . . . . . . . . . . . . . . . . . . . . . . . . 21
PLT4.5S-C. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 6
PLT4.5S-C0. . . . . . . . . . . . . . . . . . . . . . . . . . . . 14
PLT5H-L . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .7
PLT5H-L0 . . . . . . . . . . . . . . . . . . . . . . . . . . . . .15
PLT5EH-Q . . . . . . . . . . . . . . . . . . . . . . . . . . . . .7
PLT5EH-Q0 . . . . . . . . . . . . . . . . . . . . . . . . . . .15
PLT5S-C . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 6
PLT5S-C0 . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 14
PLT6H-L . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .7
PLT6H-L0 . . . . . . . . . . . . . . . . . . . . . . . . . . . . .15
PLT6EH-Q . . . . . . . . . . . . . . . . . . . . . . . . . . . . .7
PLT6EH-Q0 . . . . . . . . . . . . . . . . . . . . . . . . . . .15
PLT6LH-L . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .7
PLT6LH-L0 . . . . . . . . . . . . . . . . . . . . . . . . . . . . 15
PLT7LH-L . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .7
PLT7LH-L0 . . . . . . . . . . . . . . . . . . . . . . . . . . . . 15
PLT8EH-C . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 7
PLT8EH-Q0. . . . . . . . . . . . . . . . . . . . . . . . . . . . 15
PLT8H-L . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .7
PLT8H-L0 . . . . . . . . . . . . . . . . . . . . . . . . . . . . .15
PLT8LH-C120 . . . . . . . . . . . . . . . . . . . . . . . . . . 21
PLT8LH-L . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 7
PLT8LH-L0 . . . . . . . . . . . . . . . . . . . . . . . . . . . . 15
PLT9LH-L . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .7
PLT9LH-L0 . . . . . . . . . . . . . . . . . . . . . . . . . . . .15
PLT10EH-C . . . . . . . . . . . . . . . . . . . . . . . . . . . .7
PLT10EH-Q0 . . . . . . . . . . . . . . . . . . . . . . . . . .15
PLT10LH-L . . . . . . . . . . . . . . . . . . . . . . . . . . . . .7
PLT12EH-C . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 7
PLT12EH-Q0. . . . . . . . . . . . . . . . . . . . . . . . . . . 15
PLT13H-Q. . . . . . . . . . . . . . . . . . . . . . . . . . . . . .7
PLT13H-Q0 . . . . . . . . . . . . . . . . . . . . . . . . . . . . 15
PLUP40S-D30 . . . . . . . . . . . . . . . . . . . . . . . . .13
PLUP40SE-D30 . . . . . . . . . . . . . . . . . . . . . . . .13
PLWP1M-C. . . . . . . . . . . . . . . . . . . . . . . . . . . .11
PLWP1S-C . . . . . . . . . . . . . . . . . . . . . . . . . . . .11
PLWP1SA-D . . . . . . . . . . . . . . . . . . . . . . . . . . . 11
PLWP1SB-D . . . . . . . . . . . . . . . . . . . . . . . . . . . 11
PLWP1.5I-C . . . . . . . . . . . . . . . . . . . . . . . . . . .11
PLWP1.5S-D . . . . . . . . . . . . . . . . . . . . . . . . . . . 11
PLWP1.5SA-D. . . . . . . . . . . . . . . . . . . . . . . . . . 11
PLWP2H-TL . . . . . . . . . . . . . . . . . . . . . . . . . . . 11
PLWP2S-C . . . . . . . . . . . . . . . . . . . . . . . . . . . .11
PLWP2SA-D . . . . . . . . . . . . . . . . . . . . . . . . . . . 11
PLWP2SB-D . . . . . . . . . . . . . . . . . . . . . . . . . . . 11
PLWP3H-TL . . . . . . . . . . . . . . . . . . . . . . . . . . .11
PLWP30SC-D30. . . . . . . . . . . . . . . . . . . . . . . .12
PLWP40SC-D30 . . . . . . . . . . . . . . . . . . . . . . . . 12
PLWP40SD-D30. . . . . . . . . . . . . . . . . . . . . . . .12
PLWP50SC-D30. . . . . . . . . . . . . . . . . . . . . . . .12
PLWP50SE-D30 . . . . . . . . . . . . . . . . . . . . . . . . 12
PM2H25-C. . . . . . . . . . . . . . . . . . . . . . . . . . . . . 98
PM2H25-M0 . . . . . . . . . . . . . . . . . . . . . . . . . . . 98
PM2H25-M30 . . . . . . . . . . . . . . . . . . . . . . . . . . 98
PMCC38H25-C . . . . . . . . . . . . . . . . . . . . . . . . 109
PMCC38H25-M0 . . . . . . . . . . . . . . . . . . . . . . . 109
PP1S-S10-X . . . . . . . . . . . . . . . . . . . . . . . . . . 102
PP1S-S12-X . . . . . . . . . . . . . . . . . . . . . . . . . . 102
PP2S-S10-X . . . . . . . . . . . . . . . . . . . . . . . . . . 102
PP2S-S12-X . . . . . . . . . . . . . . . . . . . . . . . . . . 102
PP5x50F . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 53
PPC25x50 . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 53
PPC25x50F . . . . . . . . . . . . . . . . . . . . . . . . . . . . 53
PPF2S-S25-V . . . . . . . . . . . . . . . . . . . . . . . . . 133
PPF2S-S25-V69 . . . . . . . . . . . . . . . . . . . . . . . 133
PPF2SV-S25-V . . . . . . . . . . . . . . . . . . . . . . . . 133
PPF2SV-S25-V69 . . . . . . . . . . . . . . . . . . . . . . 133
PPH10 . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 58
PPTEH . . . . . . . . . . . . . . . . . . . . . . . . . . . . 55, 58
PPTMT . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .78
PPTS . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 55, 58
PRA2S-A-Q . . . . . . . . . . . . . . . . . . . . . . . . . . . . 87
PRLWP30S-D30 . . . . . . . . . . . . . . . . . . . . . . . . 12
PRLWP50S-D30 . . . . . . . . . . . . . . . . . . . . . . . . 12
Page
Number
Part Number
PRST30S-S14-M30 . . . . . . . . . . . . . . . . . . . . . 46
PRT1S-C. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 8
PRT1S-C0. . . . . . . . . . . . . . . . . . . . . . . . . . . . . 17
PRT1.5S-C . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 8
PRT1.5S-C0 . . . . . . . . . . . . . . . . . . . . . . . . . . . 17
PRT2EH-C . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 8
PRT2EH-Q0 . . . . . . . . . . . . . . . . . . . . . . . . . . . 16
PRT2H-L . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 8
PRT2H-L0 . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 17
PRT2S-C. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 8
PRT2S-C0. . . . . . . . . . . . . . . . . . . . . . . . . . . . . 17
PRT3H-L . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 8
PRT3H-L0 . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 17
PRT3S-C. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 8
PRT3S-C0. . . . . . . . . . . . . . . . . . . . . . . . . . . . . 17
PRT4H-L . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 8
PRT4H-L0 . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 17
PRT4S-C. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 8
PRT4S-C0. . . . . . . . . . . . . . . . . . . . . . . . . . . . . 17
PRT5EH-C100 . . . . . . . . . . . . . . . . . . . . . . . . . 19
PRT5EH-Q . . . . . . . . . . . . . . . . . . . . . . . . . . . . 8
PRT5EH-Q0 . . . . . . . . . . . . . . . . . . . . . . . . . . 16
PRT6EH-C100 . . . . . . . . . . . . . . . . . . . . . . . . . 19
PRT6EH-Q . . . . . . . . . . . . . . . . . . . . . . . . . . . . 8
PRT6EH-Q0 . . . . . . . . . . . . . . . . . . . . . . . . . . 16
PRT8EH-C . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 8
PRT8EH-Q0 . . . . . . . . . . . . . . . . . . . . . . . . . . . 16
PRT10EH-C . . . . . . . . . . . . . . . . . . . . . . . . . . . . 8
PRT10EH-Q0 . . . . . . . . . . . . . . . . . . . . . . . . . . 16
PRT12EH-C . . . . . . . . . . . . . . . . . . . . . . . . . . . . 8
PRT12EH-Q0 . . . . . . . . . . . . . . . . . . . . . . . . . . 16
PRWP1S-C . . . . . . . . . . . . . . . . . . . . . . . . . . . . 11
PRWP1SA-C. . . . . . . . . . . . . . . . . . . . . . . . . . . 11
PRWP1SB-D. . . . . . . . . . . . . . . . . . . . . . . . . . . 11
PRWP1.5S-D . . . . . . . . . . . . . . . . . . . . . . . . . 11
PRWP2H-TL . . . . . . . . . . . . . . . . . . . . . . . . . . . 11
PRWP2S-D . . . . . . . . . . . . . . . . . . . . . . . . . . . 11
PTS . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 55, 58
PW50F-T. . . . . . . . . . . . . . . . . . . . . . . . . . . . . 168
PW50F-T20. . . . . . . . . . . . . . . . . . . . . . . . . . . 168
PW75F-C . . . . . . . . . . . . . . . . . . . . . . . . . . . . 168
PW75F-C20 . . . . . . . . . . . . . . . . . . . . . . . . . . 168
PWMS-H25-C . . . . . . . . . . . . . . . . . . . . . . . . . . 98
PWMS-H25-M0. . . . . . . . . . . . . . . . . . . . . . . . . 98
PWT50 . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 168
PWT75 . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 168
PX-0 . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 105
PX-2 . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 105
PX-10 . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 105
R
RAFCBI1-S6-C20 . . . . . . . . . . . . . . . . . . . . . . 103
RAFCBI2-S6-C20 . . . . . . . . . . . . . . . . . . . . . . 103
RAFCBI3-S6-C20 . . . . . . . . . . . . . . . . . . . . . . 103
RAMH-S10-D . . . . . . . . . . . . . . . . . . . . . . . . . . 96
RAMH-S6-D . . . . . . . . . . . . . . . . . . . . . . . . . . . 96
RAMS-S3-M . . . . . . . . . . . . . . . . . . . . . . . . . . . 96
RER.5E-X . . . . . . . . . . . . . . . . . . . . . . . . . . . . 124
RER.5-S6-X . . . . . . . . . . . . . . . . . . . . . . . . . . 124
RER.75E-X . . . . . . . . . . . . . . . . . . . . . . . . . . . 124
RER.75-S6-X . . . . . . . . . . . . . . . . . . . . . . . . . 124
RER1.25E-X . . . . . . . . . . . . . . . . . . . . . . . . . . 124
RER1.25-S6-X . . . . . . . . . . . . . . . . . . . . . . . . 124
S
SACS50-T100. . . . . . . . . . . . . . . . . . . . . . . . .
SE125PFR-LR0 . . . . . . . . . . . . . . . . . . . . . . .
SE125PFR-TR0 . . . . . . . . . . . . . . . . . . . . . . .
SE125PFR-LR8 . . . . . . . . . . . . . . . . . . . . . . .
SE125PFR-TR8 . . . . . . . . . . . . . . . . . . . . . . .
SE125P-LR0 . . . . . . . . . . . . . . . . . . . . . . . . . .
SE125P-TR0. . . . . . . . . . . . . . . . . . . . . . . . . .
SE125P-LR8 . . . . . . . . . . . . . . . . . . . . . . . . . .
SE125P-TR8. . . . . . . . . . . . . . . . . . . . . . . . . .
SE125P-TR10. . . . . . . . . . . . . . . . . . . . . . . . .
SE12PFR-TR0 . . . . . . . . . . . . . . . . . . . . . . . .
SE12PFR-MR0 . . . . . . . . . . . . . . . . . . . . . . . .
SE12PFR-TR8 . . . . . . . . . . . . . . . . . . . . . . . .
SE12PFR-MR8 . . . . . . . . . . . . . . . . . . . . . . . .
SE12P-MR10 . . . . . . . . . . . . . . . . . . . . . . . . .
SE12P-TR0. . . . . . . . . . . . . . . . . . . . . . . . . . .
SE12P-MR0 . . . . . . . . . . . . . . . . . . . . . . . . . .
SE12P-TR8. . . . . . . . . . . . . . . . . . . . . . . . . . .
SE12P-MR8 . . . . . . . . . . . . . . . . . . . . . . . . . .
SE25PFRLD-MR0. . . . . . . . . . . . . . . . . . . . . .
SE25PFR-MR0 . . . . . . . . . . . . . . . . . . . . . . . .
SE25PFR-MR8 . . . . . . . . . . . . . . . . . . . . . . . .
SE25PFR-TR0 . . . . . . . . . . . . . . . . . . . . . . . .
SE25PFR-TR8 . . . . . . . . . . . . . . . . . . . . . . . .
SE25PLD-MR0 . . . . . . . . . . . . . . . . . . . . . . . .
SE25P-MR0 . . . . . . . . . . . . . . . . . . . . . . . . . .
SE25P-MR8 . . . . . . . . . . . . . . . . . . . . . . . . . .
SE25P-MR10 . . . . . . . . . . . . . . . . . . . . . . . . .
SE25P-TR0. . . . . . . . . . . . . . . . . . . . . . . . . . .
SE25P-TR8. . . . . . . . . . . . . . . . . . . . . . . . . . .
Most commonly used parts appear in BOLD.
107
176
176
176
176
175
175
175
175
175
176
176
176
176
175
175
175
175
175
176
176
176
176
176
175
175
175
175
175
175
191
Alphanumeric Part Number Index
Page
Number
Part Number
SE38PFR-MR0. . . . . . . . . . . . . . . . . . . . . . . . . 176
SE38PFR-MR8. . . . . . . . . . . . . . . . . . . . . . . . . 176
SE38PFR-TR0 . . . . . . . . . . . . . . . . . . . . . . . . . 176
SE38PFR-TR8 . . . . . . . . . . . . . . . . . . . . . . . . . 176
SE38P-MR0 . . . . . . . . . . . . . . . . . . . . . . . . . . .175
SE38P-MR8 . . . . . . . . . . . . . . . . . . . . . . . . . . .175
SE38P-MR10 . . . . . . . . . . . . . . . . . . . . . . . . . . 175
SE38P-TR0 . . . . . . . . . . . . . . . . . . . . . . . . . . .175
SE38P-TR8 . . . . . . . . . . . . . . . . . . . . . . . . . . .175
SE50P-CR0 . . . . . . . . . . . . . . . . . . . . . . . . . . .175
SE50P-CR8 . . . . . . . . . . . . . . . . . . . . . . . . . . .175
SE50P-DR0 . . . . . . . . . . . . . . . . . . . . . . . . . . .175
SE50P-DR8 . . . . . . . . . . . . . . . . . . . . . . . . . . .175
SE50P-DR10 . . . . . . . . . . . . . . . . . . . . . . . . . . 175
SE50PFR-CR0 . . . . . . . . . . . . . . . . . . . . . . . . . 176
SE50PFR-CR8 . . . . . . . . . . . . . . . . . . . . . . . . . 176
SE50PFR-DR0 . . . . . . . . . . . . . . . . . . . . . . . . . 176
SE50PFR-DR8 . . . . . . . . . . . . . . . . . . . . . . . . . 176
SE75P-CR0 . . . . . . . . . . . . . . . . . . . . . . . . . . .175
SE75P-CR8 . . . . . . . . . . . . . . . . . . . . . . . . . . .175
SE75P-DR0 . . . . . . . . . . . . . . . . . . . . . . . . . . .175
SE75P-DR8 . . . . . . . . . . . . . . . . . . . . . . . . . . .175
SE75P-DR10 . . . . . . . . . . . . . . . . . . . . . . . . . . 175
SE75PFR-CR0 . . . . . . . . . . . . . . . . . . . . . . . . . 176
SE75PFR-CR8 . . . . . . . . . . . . . . . . . . . . . . . . . 176
SE75PFR-DR0 . . . . . . . . . . . . . . . . . . . . . . . . . 176
SE75PFR-DR8 . . . . . . . . . . . . . . . . . . . . . . . . . 176
SE150PFR-LR0 . . . . . . . . . . . . . . . . . . . . . . . . 176
SE150PFR-LR8 . . . . . . . . . . . . . . . . . . . . . . . . 176
SE150PFR-TR0 . . . . . . . . . . . . . . . . . . . . . . . . 176
SE150PFR-TR8 . . . . . . . . . . . . . . . . . . . . . . . . 176
SE150P-LR0 . . . . . . . . . . . . . . . . . . . . . . . . . . 175
SE150P-LR8 . . . . . . . . . . . . . . . . . . . . . . . . . . 175
SE150P-TR0 . . . . . . . . . . . . . . . . . . . . . . . . . . 175
SE150P-TR8 . . . . . . . . . . . . . . . . . . . . . . . . . . 175
SE150P-TR10 . . . . . . . . . . . . . . . . . . . . . . . . . 175
SE175PFR-TR0 . . . . . . . . . . . . . . . . . . . . . . . . 176
SE175P-TR0 . . . . . . . . . . . . . . . . . . . . . . . . . . 175
SHH1-S8-X . . . . . . . . . . . . . . . . . . . . . . . . . . . .128
SHH3-S8-X . . . . . . . . . . . . . . . . . . . . . . . . . . . .128
SICH25-C . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 120
SICH38-C . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 120
SICH50-C . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 120
SICH75-C . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 120
SICH100-C . . . . . . . . . . . . . . . . . . . . . . . . . . . .120
SICH150-C . . . . . . . . . . . . . . . . . . . . . . . . . . . .120
SMS-A-C . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 87
SMS-S6-D . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 87
SR2 . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 54
SSC2S-S10-C . . . . . . . . . . . . . . . . . . . . . . . . . . 43
SSC4H-S25-L. . . . . . . . . . . . . . . . . . . . . . . . . . . 43
SSPM2.5H-L300 . . . . . . . . . . . . . . . . . . . . . . . 44
SSPM2.5HP-L300 . . . . . . . . . . . . . . . . . . . . . . . 44
SSPM4H-L300 . . . . . . . . . . . . . . . . . . . . . . . . 44
SSPM4HLP-TL300. . . . . . . . . . . . . . . . . . . . . . . 44
SSPM4HP-L300 . . . . . . . . . . . . . . . . . . . . . . . 44
SST1M-C . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 43
SST1.5I-C. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 43
SST1.5M-C. . . . . . . . . . . . . . . . . . . . . . . . . . . . .43
SST2I-C . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 43
SST2S-C . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 43
SST3I-C . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 43
SST3S-C . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 43
SST4H-D . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 43
SST4S-C . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 43
SST8H-D . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 43
ST2EH . . . . . . . . . . . . . . . . . . . . . . . . . . . . .55, 57
ST2MT . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 78
STH2 . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .55, 57
STHV . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .55, 57
STS2 . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .55, 57
T
T100F-C . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 166
T100F-C0 . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 166
T12F-C . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 166
T12F-C0 . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 166
T12FR-C. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 167
T12FR-C20. . . . . . . . . . . . . . . . . . . . . . . . . . . .167
T19FR-C. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 167
T19FR-C20. . . . . . . . . . . . . . . . . . . . . . . . . . . .167
T25FR-C. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 167
T25FR-C20. . . . . . . . . . . . . . . . . . . . . . . . . . . .167
T38FR-C. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 167
T38FR-C20. . . . . . . . . . . . . . . . . . . . . . . . . . . .167
T50FR-C. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 167
T50FR-C20. . . . . . . . . . . . . . . . . . . . . . . . . . . .167
T62FR-C. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 167
T62FR-C20. . . . . . . . . . . . . . . . . . . . . . . . . . . .167
T75FR-C. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 167
T75FR-C20. . . . . . . . . . . . . . . . . . . . . . . . . . . .167
T100FR-C. . . . . . . . . . . . . . . . . . . . . . . . . . . . . 167
T100FR-C20. . . . . . . . . . . . . . . . . . . . . . . . . . . 167
T12N-C . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 167
192
Most commonly used parts appear in BOLD.
Part Number
Page
Number
T12N-C0. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 167
T12R-C. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 167
T19F-C. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 166
T19F-X0 . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 166
T19N-C. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 167
T19N-C0. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 167
T19R-C. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 167
T19T-C. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 167
T12T-C. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 167
T25F-C. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 166
T25F-C0. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 166
T25F-C1. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 166
T25F-C2. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 166
T25F-C3. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 166
T25F-C4. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 166
T25F-C5. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 166
T25F-C6. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 166
T25F-C7. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 166
T25F-C8. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 166
T25F-C10. . . . . . . . . . . . . . . . . . . . . . . . . . . . . 166
T25F-C16. . . . . . . . . . . . . . . . . . . . . . . . . . . . . 166
T25F-X . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 166
T25F-X0 . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 166
T25N-C. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 167
T25N-C0. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 167
T25R-C. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 167
T25R-C20. . . . . . . . . . . . . . . . . . . . . . . . . . . . . 167
T25T-L . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 167
T38F-C. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 166
T38F-C0. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 166
T38N-C. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 167
T38N-C0. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 167
T38R-C. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 167
T50F-C. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 166
T50F-C0. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 166
T50F-C1. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 166
T50F-C2. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 166
T50F-C3. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 166
T50F-C4. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 166
T50F-C5. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 166
T50F-C6. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 166
T50F-C7. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 166
T50F-C8. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 166
T50F-C10. . . . . . . . . . . . . . . . . . . . . . . . . . . . . 166
T50F-C16. . . . . . . . . . . . . . . . . . . . . . . . . . . . . 166
T50F-X . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 166
T50F-X0 . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 166
T50N-C. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 167
T50N-C0. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 167
T50R-C. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 167
T50T-Q. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 167
T62F-C. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 166
T62F-C0. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 166
T62N-C. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 167
T62N-C0. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 167
T62R-C. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 167
T62T-Q. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 167
T75F-C. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 166
T75F-C0. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 166
T75N-C. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 167
T75N-C0. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 167
T75R-C. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 167
T75T-X . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 167
T100N-C. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 167
T100N-C0. . . . . . . . . . . . . . . . . . . . . . . . . . . . . 167
T100R-C. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 167
T100T-X . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 167
TA1S8-C . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 93
TA1S8-M0 . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 93
TA1S8-M30 . . . . . . . . . . . . . . . . . . . . . . . . . . . . 93
TA1S8-M69 . . . . . . . . . . . . . . . . . . . . . . . . . . . . 93
TA1S10-C . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 93
TA1S10-M0 . . . . . . . . . . . . . . . . . . . . . . . . . . . . 93
TA2-C. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 93
TC3-5-C100 . . . . . . . . . . . . . . . . . . . . . . . . . . . 118
TC5-7-C100 . . . . . . . . . . . . . . . . . . . . . . . . . . . 118
TC5x8-C100. . . . . . . . . . . . . . . . . . . . . . . . . . . 118
TC6x10-C100. . . . . . . . . . . . . . . . . . . . . . . . . . 118
TC7-10-C100 . . . . . . . . . . . . . . . . . . . . . . . . . . 118
TC7x14-C100. . . . . . . . . . . . . . . . . . . . . . . . . . 118
TC9x18-C100. . . . . . . . . . . . . . . . . . . . . . . . . . 118
TC10-14-C100 . . . . . . . . . . . . . . . . . . . . . . . . . 118
TC14-20-C100 . . . . . . . . . . . . . . . . . . . . . . . . . 118
THM1SC-C. . . . . . . . . . . . . . . . . . . . . . . . . . . . 101
THM1SC-C30. . . . . . . . . . . . . . . . . . . . . . . . . . 101
THMSC35-C630. . . . . . . . . . . . . . . . . . . . . . . . 100
THMSC35-C639. . . . . . . . . . . . . . . . . . . . . . . . 100
THMSC35F-C630 . . . . . . . . . . . . . . . . . . . . . . 100
THMSC35F-C639 . . . . . . . . . . . . . . . . . . . . . . 100
THMSP20-C. . . . . . . . . . . . . . . . . . . . . . . . . . . 100
THMSP20F-C. . . . . . . . . . . . . . . . . . . . . . . . . . 100
THMSP20F-C30. . . . . . . . . . . . . . . . . . . . . . . . 100
THMSP25-C. . . . . . . . . . . . . . . . . . . . . . . . . . . 100
THMSP25F-C. . . . . . . . . . . . . . . . . . . . . . . . . . 100
Page
Number
Part Number
TJF-X . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 126
TM1A-C . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 92
TM1S4-C . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 89
TM1S6-C . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 89
TM2A-C . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 92
TM2PWH25-C . . . . . . . . . . . . . . . . . . . . . . . . . . 98
TM2R6-C . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 89
TM2S6-C . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 89
TM2S8-C . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 89
TM3A-C . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 92
TM3R6-C . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 89
TM3S8-C . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 89
TM3S10-C . . . . . . . . . . . . . . . . . . . . . . . . . . . . 89
TM3S25-C . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 89
TM3-X2-C0 . . . . . . . . . . . . . . . . . . . . . . . . . . . . 90
TMEH25. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 90
TMEHS8 . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 90
TMEH-S8-Q0. . . . . . . . . . . . . . . . . . . . . . . . . . . 90
TMEHS10 . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 90
TMEH-S10-C100. . . . . . . . . . . . . . . . . . . . . . . . 90
TMEH-S10-C109. . . . . . . . . . . . . . . . . . . . . . . . 90
TMEH-S10-Q0. . . . . . . . . . . . . . . . . . . . . . . . . . 90
TMEH-S25-Q0. . . . . . . . . . . . . . . . . . . . . . . . . . 90
TMEH-X2-L0 . . . . . . . . . . . . . . . . . . . . . . . . . . . 90
TMSH50-T300, TMSTHS10-D0, TMSTHS13-D0,
TMSTHS16-D0, TMSTHS19-D0, TMSTLHS5-M0,
TMSTLHS6-M0, TMSTLHS8-M0. . . . . . . . . . . . 91
TP2-C . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 95
TP4H-C . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 95
TRC18FR-X8. . . . . . . . . . . . . . . . . . . . . . . . . . 132
TTLK3 . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 59
TV105-.25TL, TV105-.25TL20, TV105-.31TL,
TV105-.31TL20, TV105-.38TL, TV105-.38TL20,
TV105-.44TL, TV105-.44TL20, TV105-.50TL,
TV105-.50TL20, TV105-.56C, TV105-.56C20,
TV105-.63C, TV105-.63C20, TV105-.75C,
TV105-.75C20, TV105-.88C, TV105-.88C20,
TV105-0TL, TV105-0TL20, TV105-1.0L,
TV105-1.0L20, TV105-1.25L, TV105-1.25L20,
TV105-1.50L, TV105-1.50L20, TV105-10D,
TV105-10D20, TV105-11D, TV105-11D20,
TV105-12D, TV105-12D20, TV105-13M,
TV105-13M20, TV105-14M, TV105-14M20,
TV105-15M, TV105-15M20, TV105-16M,
TV105-16M20, TV105-17M, TV105-17M20,
TV105-18M, TV105-18M20, TV105-19M,
TV105-19M20, TV105-1TL, TV105-1TL20,
TV105-20M, TV105-20M20, TV105-222.5M,
TV105-222.5M20, TV105-242.5M,
TV105-242.5M20, TV105-2TL, TV105-2TL20,
TV105-3TL, TV105-3TL20, TV105-4TL,
TV105-4TL20, TV105-5TL, TV105-5TL20,
TV105-6TL, TV105-6TL20, TV105-7D,
TV105-7D20, TV105-8D, TV105-8D20, TV105-9D,
TV105-9D20 . . . . . . . . . . . . . . . . . . . . . . . . . . 163
TWR-C. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 118
TWR-C0. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 118
V
VCC25-A-C, VCC25-A-C20, VCC50-A-C . . . . 113
VSC.25-L . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 119
VSC.25-L100 . . . . . . . . . . . . . . . . . . . . . . . . . . 119
VWS106-C. . . . . . . . . . . . . . . . . . . . . . . . . . . . 130
VWS106-C20. . . . . . . . . . . . . . . . . . . . . . . . . . 130
VWS42105-C, VWS4218-C, VWS4238-C,
VWS4274-C. . . . . . . . . . . . . . . . . . . . . . . . . . . 121
VWSDC-C . . . . . . . . . . . . . . . . . . . . . . . . . . . . 130
W
WBS6-Q. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 122
WEH-E8-C . . . . . . . . . . . . . . . . . . . . . . . . . . . . 126
WPMH-C . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 99
WS25-25-C, WS25-50-C, WS25-75-C,
WS35-25-C, WS35-50-CFB, WS35-75-C,
WS50-25-C, WS50-50-C, WS50-75-C,
WS75-25-C, WS75-50-C, WS75-75-C . . . . . . 120