Cisco Catalyst 3020 Blade Switch for HP c

Cisco Catalyst 3020 Blade Switch for HP c-Class
BladeSystem
QuickSpecs
Overview
The Cisco Catalyst 3020 Blade Switch for HP c-Class BladeSystem provides HP customers with an integrated switching solution from
Cisco Systems. This solution provides Cisco resiliency, advanced security and enhanced manageability to the server edge while
dramatically reducing cabling requirements. The Catalyst 3020 Blade Switch capitalizes on your current Cisco network infrastructure
to reduce the total cost of implementation and ownership. By utilizing the advanced Cisco end-to-end management framework,
customers can simplify current and future deployments reducing implementation and management costs.
Flexible to fit your needs - The Catalyst 3020 Blade Switch is designed with sixteen internal 1Gb downlinks and eight 1Gb RJ-45
copper uplinks. Up to four uplinks can be optionally configured as fiber SX links. Two uplinks can optionally be configured as
internal cross-connects.
Figure 1 Catalyst 3020 Front View
1.
2.
3.
4.
5.
Switch Module
Release latch
UID LED
SFP Module Port LED
SFP Module Ports for SX Fiber
6.
7.
8.
9.
10
Gigabit Ethernet Port LEDs
Gigabit Ethernet RJ-45 Ports
Health LED
Mode Button
Switch LED Panel
What's New
Support for HP ProLiant BL680 G5 server blade
Support for HP BladeSystem c3000 Enclosure
DA - 12515
Worldwide — Version 7 — November 12, 2007
Page 1
QuickSpecs
Cisco Catalyst 3020 Blade Switch for HP c-Class
BladeSystem
Overview
At A Glance
Performance
Wire speed switching on sixteen internal 1Gb ports.
Wire Speed switching on eight external 10/100/1000BASE-T ports. (Two of these ports can be used as cross-connects to
provide failover protection).
Four external 10/100/1000 SFP based ports that can be configured in lieu of the 10/100/1000BASE-T ports to support Fiber
SX SFP modules from Cisco Systems.
One external console port.
Management
CiscoWorks Software that includes multilayer feature configurations such as routing protocols, ACLs, and QoS parameters.
IOS CLI support providing a common user interface and command set with all Cisco routers and Cisco Catalyst desktop
switches.
The Catalyst Blade Switch 3020 supports an embedded Remote Monitoring (RMON) software agent for enhanced traffic
management, monitoring and analysis.
Security
VLAN - Virtual Local Area Network is a logical network topology configured on top of a physical network topology which
conserves bandwidth and improves security by limiting traffic to specific groups of devices.
Supports Cisco's Identity-Based Networking Services (IBNS) which prevents unauthorized network access and insures that users
get only their designated privileges.
Compatible with Cisco Secure Access Control Server (ACS) so that user security profiles and authentication follow the user
regardless of where they connect on the network.
Access Control Lists (ACL's) are maintained in hardware for maximum performance and can be used to guard against denialof-service and other attacks.
802.1x Port Security recognizes the MAC address of the device connecting to it and will set rights or limitations based on
predefined security thresholds.
DA - 12515
Worldwide — Version 7 — November 12, 2007
Page 2
Cisco Catalyst 3020 Blade Switch for HP c-Class
BladeSystem
QuickSpecs
Models and Options
Models
Cisco Catalyst 3020 Blade Switch for HP
Options
1000Base SX Fiber SFP Module
410916-B21
378929-B21
Compatibility
HP ProLiant Servers
ProLiant BL c-Class
Server Blade Enclosures
ProLiant BL c-Class
Media Options
Required Network
Cabling
HP ProLiant BL460c Server Blade
HP ProLiant BL465c Server Blade
HP ProLiant BL480c Server Blade
HP ProLiant BL680c G5 Server Blade
HP ProLiant BL685c Server Blade
HP ProLiant BL860c Server Blade
HP BladeSystem c3000 Enclosure
HP BladeSystem c7000 Enclosure
Cisco Fiber SX SFP Module
Cisco Fiber LX SFP Module
10Base-T
100Base-TX
1000Base-T
1000Base-SX
1000Base LX
DA - 12515
Categories 3, 4 or 5 UTP (100 meters)
EIA/TIA-568 100-ohm STP (100 meters)
Category 5 UTP (100 meters)
EIA/TIA-568 100-ohm STP (100 meters)
Category 5 UTP (100 meters)
EIA/TIA-568 100-ohm STP (100 meters)
50/125 µm Multimode Fiber, 400 MHz/Km (500 meters)
50/125 µm Multimode Fiber, 500 MHz/Km (550 meters)
62.5/125 µm Multimode Fiber, 160 MHz/Km (220 meters)
62.5/125 µm Multimode Fiber, 200 MHz/Km (275 meters)
Operates on standard single-mode fiber-optic link spans of up to 10 km and
up to 550 m on any multimode fibers.
Worldwide — Version 7 — November 12, 2007
Page 3
QuickSpecs
Cisco Catalyst 3020 Blade Switch for HP c-Class
BladeSystem
Models and Options
HP Service and Support
Offerings
This product is covered by a global limited warranty and supported by HP Services and a worldwide
network of HP Authorized Channel Partners. Hardware diagnostic support and repair is available for
three years from date of purchase. Support for software and initial setup is available for 90 days from
date of purchase. Additional support may be covered under the warranty or available for an additional
fee. Enhancements to warranty services are available through HP Care Pack services or customized
service agreements.
NOTE: The Cisco Catalyst Blade Switch 3020 Limited Warranty includes 1 year Parts, 1 year Labor, 1year on-site support and 3-years software updates.
Care Pack services provide a range of life cycle support options that let you choose the service levels
that meet your business requirements, from basic to mission-critical.
A full range of HP Care Pack hardware and software services are available including:
Installation and start up
Education courses
Extended onsite hardware coverage hours from same business day 13 hours, 5 day to 24 hours,
7 days call window with options including 4-hour response or 6-hour Call To Repair
Comprehensive range of software technical support for Microsoft, Linux, ProLiant Essentials and
VMware-based IT solutions helping to deliver high level of application availability. Response times
range from 30 mins for critical problems to 2 hours.
System Management, Performance Services and Mission Critical Support Solution
HP Care Pack services for the c7000 and c3000 Enclosure cover the enclosure, power supplies and
fans. HP qualified rack options are covered by these services when installed within the same rack. HP
supported c-Class enclosure devices including pass thru, Ethernet interconnect and virtual connect
modules are also covered by the c7000 and c3000 enclosure Care Pack services.
NOTE: For more information on HP Care Pack services, contact any of our worldwide sales offices or
resellers or visit our worldwide Web site on the internet at: http://www.hp.com/hps/carepack
NOTE: For more complete information on HP Services offerings, customers and resellers, please visit us
at: http://www.hp.com/hps
NOTE: Additional information regarding worldwide limited warranty and technical support is available
at: http://h18004.www1.hp.com/products/servers/platforms/warranty/index.html
DA - 12515
Worldwide — Version 7 — November 12, 2007
Page 4
QuickSpecs
Cisco Catalyst 3020 Blade Switch for HP c-Class
BladeSystem
Related Options
Service and Support
Offerings (HP Care Pack
Services)
NOTE: HP Care Pack services for the c7000 and c3000 Enclosure cover the
enclosure, power supplies and fans. HP qualified rack options are covered by these
services when installed within the same rack. HP supported c-Class enclosure devices
including pass thru, Ethernet interconnect and virtual connect modules are also
covered by the c7000 and c3000 enclosure Care Pack services.
NOTE: SAN/Fabric switches for the HP c-Class BladeSystem are not covered under
the c7000 and c3000 enclosure Care Packs, SAN/Fabric switches carry separate
Care Packs. SAN/Fabric Switch Care Pack service level support should always be
uplifted to match existing storage or server service level.
Hardware Support Services On-site Service
c7000 HP Care Pack Services
4-Hour On-site Service, 5-Day x 13-Hour Coverage, 3 Years, Electronic
NOTE: Uplifts the Ethernet devices to the same level of warranty as the c-class
enclosure
4-Hour On-site Service, 5-Day x 13-Hour Coverage, 3 Years, Electronic
4-Hour On-site Service, 7-Day x 24-Hour Coverage, 3 Years, Electronic
6-Hour Call to Repair, On-site Service, 7-Day x 24-Hour Coverage, 3 Years,
Electronic
Support Plus 24
Onsite HW support 24x7, 4hr response and Insight Control Linux Edition SW
Updates, SW Tech support offsite, onsite at HP's discretion, 24x7 2hr response time
including HP holidays, Electronic
Onsite HW support 24x7, 4hr response and Insight Control Environment for
BladeSystem SW Updates, SW Tech support offsite, onsite at HP's discretion, 24x7 2hr
response time including HP holidays, Electronic
Onsite HW support 24x7, 4hr response and Insight Control Data Center Edition SW
Updates, SW Tech support offsite, onsite at HP's discretion, 24x7 2hr response time
including HP holidays, Electronic
Hardware Services On-site Service
c3000 HP Care Pack Services
Next Business Day On-site Service, 5-Day x 9-Hour Coverage, 3 Years, Electronic
NOTE: Uplifts the Ethernet devices to the same level of service as the c-class
enclosure
4-Hour On-site Service, 5-Day x 13-Hour Coverage, 3 Years, Electronic
4-Hour On-site Service, 7-Day x 24-Hour Coverage, 3 Years, Electronic
6-Hour Call to Repair, On-site Service, 7-Day x 24-Hour Coverage, 3 Years,
Electronic
Support Plus 24
Onsite HW support 24x7, 4hr response and Insight Control Environment for
BladeSystem SW Updates SW Tech support offsite, onsite at HP's discretion, 24x7 2hr
response time including HP holidays, Electronic
Upfront Fixed Installation & Start-up Services
HP BladeSystem c-Class Infrastructure Installation and Startup Service for Blade
Hardware and Insight Control Software, Electronic
HP BladeSystem c7000 Enhanced Network Installation & Start-up Service, Electronic
DA - 12515
Worldwide — Version 7 — November 12, 2007
UE477E
UE478E
UE479E
UE480E
UH321E
UH322E
UH323E
UH309E
UH310E
UH311E
UH312E
UF540E
UE602E
UE603E
Page 5
QuickSpecs
Cisco Catalyst 3020 Blade Switch for HP c-Class
BladeSystem
Related Options
HP BladeSystem c3000 Enhanced Network Installation and Startup Service, Electronic
ProLiant BL c-Class Blade Server Hardware Installation, Electronic
ProLiant BL c-Class Enclosure and Server Blade Hardware Installation, Electronic
NOTE: For more information, customer/resellers can contact
http://www.hp.com/services/bladesystemservices
DA - 12515
Worldwide — Version 7 — November 12, 2007
UF814E
UE493E
UE494E
Page 6
QuickSpecs
Cisco Catalyst 3020 Blade Switch for HP c-Class
BladeSystem
Technical Specifications
Shipping Dimensions
Shipping Weight
Product Specifications
Hardware
Length
Width
Height
352.55mm (13.88 in)
270.00mm (10.63 in)
120.65mm (4.75 in)
2.0Kg (4.4lbs)
Performance
48 Gbps switching fabric
Forwarding rate based on 64-byte packets: up to 36 Mpps
128 MB DDR SDRAM and 32 MB Flash memory
Configurable up to 8192 MAC addresses
Configurable up to 1000 IGMP groups and bridging entries
Configurable maximum transmission unit (MTU) of up to 9018 bytes (jumbo
frames)
Connectors and Cabling Gigabit Ethernet uplink ports (Up to 8 external)
8 external 10/100/1000BASE-T RJ-45 ports. Two of these ports can
be configured to provide an internal crossover connection to an
associated additional Cisco Catalyst Blade Switch 3020
4 external 10/100/1000 SFP or 10/100/1000BASE-T combo ports.
The SFP cage supports Gigabit Ethernet Fiber SX SFP modules from
Cisco Systems.
Management console port:
Indicators
Dimensions
Weight
Environmental Ranges
Power Specification
Product Specifications
Software
Security Features
DA - 12515
RJ-45-to-DB9 cable for PC connections
Total of 18 LEDs on the face place
12 LEDs for uplink port status
4 Switch status LEDs
2 HP specific LEDs to indicate Health and UID status
10.5in (267.7mm)
Length
7.5 in (92.79mm)
Width
1.1 in (27.94mm)
Height
1.27Kg (2.8 Lbs)
Temperature Range
Operating Temperature
10 to 35 C (50 to 95 F)
Storage Temperature
-40 to 70 C ( -40 to 158F)
10 to 85%
Operating Relative
Humidity
(non-condensing)
Storage Relative Humidity 5 to 95%
(non-condensing)
12V @ 5A (60 W)
IEEE 802.1x allows dynamic, port-based security, providing server
authentication.
IEEE 802.1x with VLAN assignment allows a dynamic VLAN assignment for a
Worldwide — Version 7 — November 12, 2007
Page 7
Cisco Catalyst 3020 Blade Switch for HP c-Class
BladeSystem
QuickSpecs
Technical Specifications
Spanning Tree Features
Trunking Features
DA - 12515
specific server, regardless of where the server is connected.
IEEE 802.1x and port security are provided to authenticate the port and
manage network access for all MAC addresses, including those of the server.
IEEE 802.1x with an ACL assignment allows for specific identity-based
security policies, regardless of where the server is connected.
IEEE 802.1x with Guest VLAN allows servers without 802.1x clients to have
limited network access on the Guest VLAN.
Cisco security VLAN ACLs (VACLs) on all VLANs prevent unauthorized data
flows from being bridged within VLANs.
Port-based ACLs (PACLs) allow security policies to be applied on individual
switch ports.
SSH Protocol (v2), Kerberos, and SNMPv3 provide network security by
encrypting administrator traffic during Telnet and SNMP sessions. SSH,
Kerberos, and the cryptographic version of SNMPv3 require a special
cryptographic software image due to U.S. export restrictions.
Secure Sockets Layer (SSL) provides a secure means to use Web-based tools
such as HTML-based device managers.
Private VLAN Edge provides security and isolation between switch ports,
helping to ensure that users cannot snoop on other users' traffic.
Bidirectional data support on the Switched Port Analyzer (SPAN) port allows
Cisco Secure Intrusion
IEEE 802.1D Spanning-Tree Protocol support for redundant backbone
connections and loop-free networks simplifies network configuration and
improves fault tolerance.
Per-VLAN Rapid Spanning-Tree (PVRST+) allows rapid spanning-tree
convergence on a per-VLAN spanning-tree basis, without requiring the
implementation of spanning-tree instances.
IEEE 802.1s Multiple Spanning-Tree Protocol (MSTP) allows a spanning-tree
instance per VLAN and enables each VLAN to use a different uplink allowing
better utilization of uplinks.
IEEE 802.1w Rapid Spanning-Tree Protocol (RSTP) provides rapid spanningtree convergence independent of spanning-tree timers.
Unidirectional Link Detection (UDLD) and Aggressive UDLD allow
unidirectional links to be detected and disabled to avoid problems such as
spanning-tree loops.
Cisco UplinkFast and BackboneFast technologies help to ensure quick
failover recovery, enhancing overall network stability and reliability.
PVST+ allows for Layer 2 load sharing on redundant links to efficiently use
the extra capacity inherent in a redundant design.
Dynamic Trunking Protocol (DTP) enables dynamic trunk configuration
across all switch ports.
Port Aggregation Protocol (PAgP) automates the creation of Cisco Fast
EtherChannel® groups or Gigabit EtherChannel® groups to link to the
upstream switch/router, or server blades
Link Aggregation Control Protocol (LACP) allows the creation of Ethernet
channeling with upstream switches that conform to IEEE 802.3ad. This
feature is similar to Cisco EtherChannel technology and PAgP.
Worldwide — Version 7 — November 12, 2007
Page 8
QuickSpecs
Cisco Catalyst 3020 Blade Switch for HP c-Class
BladeSystem
Technical Specifications
VLAN Features
Quality of Service
Features
Management Features
DA - 12515
4096 VLAN IDs are supported.
VLAN1 minimization allows VLAN1 to be disabled on any individual VLAN
trunk link.
VLAN Trunking Protocol (VTP) pruning limits bandwidth consumption on VTP
trunks by flooding broadcast traffic only on trunk links required to reach the
destination devices.
Wire rate performance for highly granular QoS functions. E.g. Granular rate
limiting
Asynchronous data flows upstream and downstream from the end station or
on an uplink are easily managed using ingress policing and egress shaping.
802.1p CoS and DSCP field classification are provided, using marking and
reclassification on a per-packet basis by source and destination IP address,
source and destination MAC address, or Layer 4 TCP/UDP port number.
Rate limiting is provided based on source and destination IP address, source
and destination MAC address, Layer 4 TCP/UDP information, or any
combination of these fields, using QoS ACLs (IP ACLs or MAC ACLs), class
maps, and policy maps.
Up to 64 aggregate or individual policers per port are allowed.
Cisco control-plane and data-plane QoS ACLs on all ports help to ensure
proper marking on a per-packet basis.
4 egress queues per port enable differentiated management of up to 4 traffic
flows
Shaped Round Robin scheduling helps to ensure differential prioritization of
packet flows by intelligently servicing the egress queues.
Weighted Tail Drop (WTD) provides congestion avoidance at the ingress and
egress queues before a disruption occurs.
Strict priority queuing guarantees that the highest-priority packets are
serviced ahead of all other traffic.
The Cisco Committed Information Rate (CIR) function guarantees bandwidth
in increments as low as 8 Kbps.
Cisco IOS CLI support provides a common user interface and command set
with all Cisco routers and Cisco Catalyst desktop switches.
Cisco Service Assurance Agent (SAA) support facilitates service-level
management throughout the LAN.
VLAN trunks can be created from any port, using either standards-based
802.1Q tagging or the Cisco Inter-Switch Link (ISL) VLAN architecture.
Up to 1005 VLANs per switch and up to 128 spanning-tree instances per
switch are supported.
Cisco VTP supports dynamic VLANs and dynamic trunk configuration across
all switches.
IGMP snooping provides fast client joins and leaves of multicast streams and
limits bandwidth-intensive video traffic to only the requestors.
Remote Switch Port Analyzer (RSPAN) allows administrators to remotely
monitor ports in a Layer 2 switch network from any other switch in the same
network.
For enhanced traffic management, monitoring, and analysis, the Embedded
Remote Monitoring (RMON) software agent supports 4 RMON groups
(history, statistics, alarms, and events).
Layer 2 traceroute eases troubleshooting by identifying the physical path that
a packet takes from source to destination.
All 4 RMON groups are supported through a SPAN port, which permits
Worldwide — Version 7 — November 12, 2007
Page 9
QuickSpecs
Cisco Catalyst 3020 Blade Switch for HP c-Class
BladeSystem
Technical Specifications
CiscoWorks Features
Management and
Standards Support
traffic monitoring of a single port, a group of ports from a single network
analyzer, or RMON probe.
The Domain Name System (DNS) provides IP address resolution with userdefined device names.
Trivial File Transfer Protocol (TFTP) reduces the cost of administering
software upgrades by downloading from a centralized location.
Network Time Protocol (NTP) provides an accurate and consistent timestamp
to all intranet switches.
Multifunction LEDs per port for port status; and switch-level status LEDs for
system.
CiscoWorks network-management software provides management
capabilities on a per-port and per-switch basis, providing a common
management interface for Cisco routers, switches, and hubs.
SNMP v1, v2c, and v3 and Telnet interface support deliver comprehensive
in-band management, and a CLI-based management console provides
detailed out-of-band management.
Cisco Discovery Protocol versions 1 and 2 enable a CiscoWorks networkmanagement station for automatic switch discovery.
Management Information BRIDGE-MIB (RFC1493)
Base (MIB) Support
CISCO-CDP-MIB
CISCO-CLUSTER-MIB
CISCO-CONFIG-MAN-MIB
CISCO-ENTITY-FRU-CONTROL-MIB
CISCO-ENVMON-MIB
CISCO-FLASH-MIB
CISCO-FTP-CLIENT-MIB
CISCO-IGMP-FILTER-MIB
CISCO-IMAGE-MIB
CISCO IP-STAT-MIB
CISCO-MAC-NOTIFICATION-MIB
CISCO-MEMORY-POOL-MIB
CISCO-PAGP-MIB
CISCO-PING-MIB
CISCO-PROCESS-MIB
CISCO-RTTMON-MIB
CISCO-STP-EXTENSIONS-MIB
CISCO-SYSLOG-MIB
CISCO-TCP-MIB
CISCO-VLAN-IFTABLE-RELATIONSHIP-MIB
CISCO-VLAN-MEMBERSHIP-MIB
CISCO-VTP-MIB
ENTITY-MIB
ETHERLIKE-MIB
IF-MIB (in and out counters for VLANs are not supported)
IGMP-MIB
OLD-CISCO-CHASSIS-MIB
OLD-CISCO-FLASH-MIB
OLD-CISCO-INTERFACES-MIB
OLD-CISCO-IP-MIB
OLD-CISCO-SYS-MIB
DA - 12515
Worldwide — Version 7 — November 12, 2007
Page 10
QuickSpecs
Cisco Catalyst 3020 Blade Switch for HP c-Class
BladeSystem
Technical Specifications
Standards
OLD-CISCO-TCP-MIB
OLD-CISCO-TS-MIB
RFC1213-MIB (per the agent capabilities specified in the CISCO-RFC1213CAPABILITY.my)
RFC1253-MIB
RMON-MIB
RMON2-MIB
SNMP-FRAMEWORK-MIB
SNMP-MPD-MIB
SNMP-NOTIFICATION-MIB
SNMP-TARGET-MIB
SNMPv2-MIB
TCP-MIB
UDP-MIB
IEEE 802.1s
IEEE 802.1w
IEEE 802.1x
IEEE 802.3ad
IEEE 802.3x full duplex on 10BASE-T, 100BASE-TX, and 1000BASE-T ports
IEEE 802.1D Spanning-Tree Protocol
IEEE 802.1p CoS Prioritization
IEEE 802.1Q VLAN
IEEE 802.3 10BASE-T specification
IEEE 802.3u 100BASE-TX specification
IEEE 802.3ab 1000BASE-T specification
IEEE 802.3z 1000BASE-X specification
1000BASE-SX
RMON I and II standards
Safety and
Compliance
Safety Certifications
Electromagnetic
Emissions Certifications
FCC Part 15 Class A
FCC Part 15 Class A
EN 55022 Class A (CISPR22 Class A)
VCCI Class A
AS/NZS 3548 Class A or AS/NZS CISPR22 Class A
MIC Class A
CE Marking
DA - 12515
UL/CUL Recognition to UL/CSA 60950-1
TUV to EN 60950-1
CB report and certificate to IEC 60950-1 with all country deviations
CE Marking
Worldwide — Version 7 — November 12, 2007
Page 11
Cisco Catalyst 3020 Blade Switch for HP c-Class
BladeSystem
QuickSpecs
Technical Specifications
Environment-friendly
Products and Approach
End-of-life Management
and Recycling
Hewlett-Packard offers end-of-life HP product return, trade-in, and recycling
programs in many geographic areas. For trade-in information, please go to
http://www.hp.com/go/green. To recycle your product, please go to:
http://www.hp.com/go/green or contact your nearest HP sales office.
Products returned to HP will be recycled, recovered or disposed of in a
responsible manner.
The EU WEEE directive (2002/95/EC) requires manufacturers to provide
treatment information for each product type for use by treatment facilities.
This information (product disassembly instructions) is posted on the Hewlett
Packard web site at: http://www.hp.com/go/green. These instructions may
be used by recyclers and other WEEE treatment facilities as well as HP OEM
customers who integrate and re-sell HP equipment.
© Copyright 2007 Hewlett-Packard Development Company, L.P.
The information contained herein is subject to change without notice.
Cisco, CiscoWorks, and Cisco Catalyst are US registered trademarks of Cisco Systems Corporation.
Windows is a US registered trademark of Microsoft Corporation.
The only warranties for HP products and services are set forth in the express warranty statements accompanying such products and
services. Nothing herein should be construed as constituting an additional warranty. HP shall not be liable for technical or editorial
errors or omissions contained herein.
DA - 12515
Worldwide — Version 7 — November 12, 2007
Page 12