AV2326DNIR - Arecont Vision

A&E Specifications
AV2326DNIR | Rev. 062717
1080p MicroBullet, WDR, 1920x1080, 30fps, MJPEG/H.264, SNAPstream, IR LED Array,
Day/Night, 2.8-8mm Remote Focus, Remote Zoom, IP66, IK-10, PoE
This A&E specification is written according to Construction Specifications Institute (CSI) 3-Part Format, based on MasterFormat™
(2009 Edition) and The Project Resource Manual – CSI Manual of Practice. www.csinet.org/masterformat.
Manufacturer is responsible for the accuracy of the technical data included in this specification.
Division 28 – Electric Safety and Security
Section 28.23.29 – Video Surveillance – Remote Devices and Sensors
Part 1 General
1.1 General Requirements
The camera shall be of manufacturer’s official product line, designed for continuous commercial or
industrial use.
The camera shall be based on standard parts and components and utilize proven technology using open
and published protocols.
All camera installation, configuration, setup, programming and all related work shall be performed by
electronic technicians thoroughly trained in the installation and service of the equipment provided and in
complete compliance with all local codes and regulations.
All equipment provided shall be backed by a three-year manufacturer warranty.
1.2 Certifications and Standards
a) European Community Directives:
2014/30/EU (EMC Directive);
2014/35/EU (Low Voltage Directive);
2011/65/EU (RoHS Directive)
1907/2006/EC (REACH Directive)
2012/19/EU (WEEE Directive)
b) European EMC Standards to which conformity is declared:
EN 55022:2010 Class A
EN 55024:2010
EN 61000-3-2: 2014
EN 61000-3-3: 2013
EN 60950-1:2006 + A11:2009 + A1:2010 + A12:2011 + A2:2013
c) FCC Standard Compliance:
Title 47, Part 15 (47 CFR 15) Subpart B Class A
d) Video Compression Technology
H.264 MPEG-4, Part 10 ISO/IEC 14496-10 AVC
e) Mechanical Standards:
Page 1
A&E Specifications
AV2326DNIR | Rev. 062717
EN 60529:1991+A1:2004+A2:2013 - IP66 dust/water Ingress protection rating
EN 62262:2002 – IK-10 impact rating
Networking Standard:
IEEE 802.3af-2003 PoE Standard, Class 3
IPv4, HTTPS, 802.1x
g) Interoperability Standard
ONVIF Profile S and PSIA compliant
h) Country of Origin
Designed in USA and “Made in China”
UL Listing
a) CB Test Report (IEC 60950-1 (ed. 2) and IEC 60950-22 (ed.2))
Part 2
Arecont Vision, LLC
425 E. Colorado St. #700
Glendale, CA 91205
Phone: 818-937-0700
2.2 General
The AV2326DNIR MicroBullet WDR Day/Night 1080p network camera is part of Arecont Vision’s full line
of H.264 MicroBullet cameras. This fully-compliant implementation of H.264 (MPEG-4, Part 10) provides
full 1920 x 1080 megapixel resolution at full video frame rates of 30 frames per second (fps). The
AV2326DNIR camera provides an all-in-one indoor flush, in-ceiling mount solution with an integrated 2megapixel camera and a remote focus module with a 2.8-8mm IR corrected lens. With the features of
PSIA and ONVIF conformance, unlimited privacy masking, extended motion detection and flexible
cropping, the AV2326DNIR is a high sensitive, PoE (IEEE 802.3af) compliant camera with a true
day/night IR cut filter. Built with Arecont Vision massively-parallel MegaVideo processing technology,
this camera offers more than 4-times the resolution of standard resolution IP cameras with the ability to
output full real-time frame rates and deliver high-quality megapixel imaging.
2.3 Hardware
• The camera shall utilize a high sensitivity 2-Megapixel effective CMOS sensor with 1/3.2” optical
format, 2.2um x 2.2um pixel size, progressive scan and active Pixel Count: 1920(H) x 1080(V)
pixel array.
• The camera shall have an integrated 2.8-8mm megapixel, IR corrected, fixed focal lens with
1/2.5" optical format, F/1.6 and horizontal field-of-view of 82° - 41°.
• The camera’s power source shall be Power over Ethernet (PoE) complying with the IEEE 802.3af
Page 2
A&E Specifications
AV2326DNIR | Rev. 062717
The MicroBullet shall have a die-cast aluminum, cylindrical (Bullet-style) housing which is IP66
weather proof standard and IK-10 Impact resistant.
The camera shall have a 3-axis easily adjustable bracket with 360° pan, 90° tilt and 180° rotation
for easy and accurate positioning.
2.4 Imaging
• The camera shall have dual standard compression support with simultaneous streaming of both
H.264 and MJPEG formats.
• The camera shall be fully conformant with PSIA and ONVIF Profile S industry-standards and pass
conformance tests.
• The camera shall have unlimited privacy masking, the ability to select multiple regions of an
arbitrary shape to block the video.
• The camera shall have an extended motion detection grid, a higher-granularity grid of 1024
distinct motion detection. The user can select between 64-zone-based motion detection and
extended motion detection to provide backward compatibility with the existing Video Management
System (VMS) integration.
• The camera shall have multi-streaming support of up to 8 non-identical concurrent streams
(different frame rate, bitrate, resolution, and quality and compression format).
• The camera shall have dynamic range up to 100dB.
• The camera shall be able to be cropped to any resolution divisible by 2 and maintain H.264
compression. It shall be possible to crop the camera to output a variety of lower resolution images
such as 1280(H) x 1024(V) at 30fps.
• The camera shall output at a maximum resolution of 1920(H) x 1080(V) pixels at a maximum
frame rate of 30fps.
• The camera shall feature streaming of the full field-of-view (FOV) and simultaneous multiple
regions of interest (ROI) for forensic zooming.
• The camera’s shutter speed shall be 1ms - 500ms.
• The camera shall provide 21 levels of compression quality for optimal viewing and archiving.
• The camera shall have Real Time Streaming Protocol (RTSP) support allowing for compatibility
with media players such as Apple QuickTime , VLC Player and others.
• The camera shall feature automatic exposure, custom white balance, shutter speed control,
adjustable 5 to 255Hz selectable flicker control, programmable brightness, saturation, gamma,
selectable enhancement sharpness level, windowing and decimation, simultaneous delivery of
full-field view and zoomed images at video frame rate, instantaneous electronic zoom, pan and tilt,
and electronic image rotation by 90, 180° and 270°.
• The camera shall have low light noise filter control and bit rate and bandwidth limitation control.
• The camera shall incorporate necessary algorithms and circuits to detect motion in low-light with
• The camera shall support an IR sensitive minimum illumination of 0.02 Lux in black and white
(B/W) mode with an additional IR light source.
• The camera shall have flexible cropping with resolution windowing down to 1x1 pixel for JPEG
and 2x2 pixels for H.264.
• The camera has SNAPstream , which is smart noise adaptation and processing.
• The camera shall have bandwidth and storage savings by running at ¼ resolutions.
• The camera shall have CorridorView (90°, 180°, and 270° image rotation).
• The MicroBullet IR boasts 850 LEDs with a projection distance of 50ft (15m) and a projection
angle of either 60° or 75°.
• The camera shall have Auto Switch control adjustment between WDR and LDR modes (only in
WDR Models).
2.5 Video
Video frame rate (up to):
30 FPS @ 1920(H) x 1080(V)
Cropped :
30 FPS @ 1280(H) x 1024(V)
Page 3
A&E Specifications
AV2326DNIR | Rev. 062717
2.6 Protocols
• The camera shall have Real Time Streaming Protocol (RTSP) support allowing for compatibility
with media players such as Apple QuickTime, VLC Player and others.
• The camera shall support both unicast and multicast communication protocol.
• The camera shall support RTSP, RTP over TCP, RTP over UDP (Unicast/Multicast), HTTP1.0,
HTTP1.1, TFTP, DHCP, QoS, 802.1x, IPv4 and IPv6.
• 100 Base-T Ethernet Network Interface.
• Multi-streaming: 8 non-identical streams.
2.7 Electrical
Power over Ethernet (PoE): PoE 802.3af for camera, Class 3
Power Consumption: 6.5 watts max
2.8 Networking
The camera shall be equipped with a 100 Mbps LAN connector.
2.9 Environmental
Operating temperature -40˚C (-40 °F) to +50˚C (122 °F)
Storage temperature -40˚C (-40 °F) to +60˚C (140 °F)
Humidity 0% to 90% (non-condensing)
2.10 Illumination
Color (Day Mode): 0.2 Lux
B/W (Night Mode): 0.02 Lux, IR sensitive
2.11 Packaging
Total Unit Dimensions:
Unit 2.8" H (71.5mm) x 3.39" W (86mm) x 6.8" D (172.8mm) and weight of 1.01lbs (0.46kg)
Packaged 7.9" L (200mm) x 5.3" W (135mm) x 4.7" H (120mm) and weight of 1.32lbs (0.60kg)
2.12 Compatible Accessories
Round Electrical Box Adapter
Square Electrical Box Adapter
Junction Box Adapter for MicroBullet
Square Junction Box Adapter Plate for MicroBullet
2.13 Related Documents
MicroBullet Datasheet
MicroBullet Installation Manual
2.14 Warranty
Limited 3-Year Parts and Labor
Arecont Vision reserves the right to change products or specifications without notice.
Page 4