To ensure safety while driving
and to comply with laws,
drivers should not watch video or
operate the video device while driving.
Content
Precaution...................................... 2
Automatic Memory Storing &
Safety Information......................... 3
Program Scanning....................... 17
Disc Note....................................... 4
RDS function.................................. 17
Installation .................................... 5
Media Operation............................. 19
Electric Connection ...................... 7
Basic Operation .............................. 20
Remote Control ............................ 8
Selecting Play Mode ........................ 20
Basic Operation ............................ 10
On-Screen Display Function ............. 21
Main Menu Operation...................... 10
Digital Video Special Function........22
Setting animation........................... 10
Multi-Subtitle Language function....... 22
Setting disc.................................... 10
Multi-audio language Function.......... 22
Setting radio................................... 11
Multi-angle Function........................ 22
Setting BT...................... ................ 11
Title menu function .......................... 22
Setting wallpaper............ ................11
BT Operation................................ 23
Version about..................................11
AUX Operation ............................... 26
Setting time.......... ......................... 11
AV Operation.................................. 27
Setting audio mode......................... 11
USB Operation ............................... 28
Setting video mode......................... 12
Card Operation .............................. 28
Setting OSD language.................... 12
SD Operation..............................
Setting illumination color................. 12
29
Parental Control............................. 30
TFT display calibration. .................. 12
Region Code.................................. 31
Reset Factory Settings ................... 12
Specification ................................. 32
Rear View Camera ........................ 12
Troubleshooting.............................33
Control Panel ................................13
Unit keys ........................................13
Radio Operation............................ 16
Listening to the radio ...................... 16
Storing and Listening to a memory
station ........................................ 16
-1-
Precaution
THANK YOU FOR PURCHASING A SOUNDSTORM MULTIMEDIA PLAYER .
Before operating the unit, read this manual thoroughly and keep it handy
for future reference .
To avoid injury or accident , read the following precautions before
installing and operating the unit .
ON INSTALLATION
DO NOT install any receiver in locations where;
- it may obstruct the steering wheel and gearshift lever operations, as this
may result in a traffic accident.
- it may obstruct the operation of safety devices such as air bags, as this
may result in a fatal accident.
- it may obstruct visibility.
DO NOT operate any receiver while manipulating the steering wheel, as
this may result in a traffic accident.
The driver must not watch the monitor while driving.
IF THE DRIVER watches the monitor while driving, it may lead to
carelessness and cause an accident.
IF YOU NEED to operate the receive while driving, be sure to look ahead
carefully or you may be involved in a traffic accident.
IF THE PARKING BRAKE is not engaged.“ Parking Brake” flashes on the
monitor, and no playback picture will be shown.
- This warning appears only when the parking brake wire is connected to
the parking brake system built in the car ( refer to the electric connection)
ABOUT THE LIQUID CRYSTAL DISPLAY (LED) PANEL
Do not press on the LED panel on the unit as doing so can distort the
picture or cause a malfunction . The picture may become unclear , or the
LED panel may be damaged .
NOTES ON CLEANING
-Clean the LED panel with a slightly damp soft cloth.
-Do not use solvents such as benzine, thinner, commercially available
cleaners or antistatic spray .
- Do not use alcohol to clean the screen .
If your car was parked in a cold or hot place, the picture may not be clear .
The monitor is not damaged . The picture will become clear the temperature in your car becomes normal .
-2-
Safety Information
CAUTION:
THIS DIGITAL VIDEO PLAYER IS A CLASS I LASER PRODUCT. HOWEVER
THIS DIGITAL VIDEO PLAYER USES A VISIBLE/INVISIBLE LASER BEAM
WHICH COULD CAUSE .
HAZARDOUS RADIATION EXPOSURE IF DIRECTED. BE SURE TO OPERATE
THE DIGITAL VIDEO PLAYER CORRECTLY AS INSTRUCTED.
USE OF CONTROLS OR ADJUSTMENTS OR PERFORMANCE OF
PROCEDURES OTHER THAN THOSE SPECIFIED HEREIN MAY RESULT IN
HAZARDOUS RADIATION EXPOSURE.DO NOT OPEN COVERS AND DO NOT
REPAIR YOURSELF. REFER SERVICING TO QUALIFIED PERSONNEL.
WARNING:
TO REDUCE THE RISK OF FIRE OR ELECTRIC SHOCK, DO NOT EXPOSE THIS
EQUIPMENT TO RAIN OR MOISTURE.
TO REDUCE THE RISK OF FIRE OR ELECTRIC SHOCK, AND ANNOYING
INTERFERENCE, USE ONLY THE RECOMMENDED ACCESSORIES.
THIS DEVICE IS INTENDED FOR CONTINUOUS OPERATION.
This product incorporates copyright protection technology that is protected
by method claims of certain U.S. Patents and other intellectual property rights
owned by Macrovision Corporation and other rights owners.Use of this
copyright protection technology must be authorized by Macro vision Corporation,
and is intended for home and other limited viewing uses only unless
otherwise authorized by Macrovision Corporation. Reverse engineering or
disassembly is prohibited.
REGION MANAGEMENT INFORMATION:
This Digital Video Player is designed and manufactured to respond to the Region
Management Information that is recorded on a Digital Video disc. If the Region
number described on the Digital Video disc does not correspond to the Region
number of this Digital Video Player, this Digital Video Player cannot play this disc.
-3-
Disc Note
Disc formats supported by this
player
Digital Digital
Video Video
Audio and Video
Disc size 12 cm
VCD
VCD
Audio and Video
Disc size 12 cm
CD
CD
Audio
Disc size 12 cm
MP3
MP3
Audio
Disc size 12 cm
Discs which cannot be played
with this player
Digital Video-RAM
CDV
CDG
Handling and Cleaning
Dirt, dust, scratches and warping disc
will cause misoperation.
Do not place stickers or make
scratches on discs.
Do not warp discs.
A disc should always be kept in its
case when not in use to prevent from
damaging.
Do not place discs in the following
places:
1.Direct sunlight
2.Dirty, dusty and damp areas
3.Near car heaters
4.On the seats or dashboard
Disc Cleaning
Use a dry soft cloth to wipe the surface.
If the disc is quite dirty, use a soft cloth
slightly moistured with isopropyl (rubbing)
alcohol. Never use solvents such as
benzine, thinner or conventional record
cleaners as they may mar the surface of
the disc.
Note:
A disc may become somewhat scratched
(although not enough to make it
-4-
unusable) depending on your handle it
and conditions in the usage environment.
Note these scratches are not an
indication of any problem with the player.
Label side
up
Do not touch
the
underside
of the disc
Do not
bend
Wipe the disc from
center
toward the outside
edge
Preparing New Discs with Rough
Spots
A new disc may have rough edges on
its inside and outside edges. If a disc
with rough edges is used, the proper
setting will not be performed and the
player will not play the disc. Therefore,
remove the rough edges in advance
by using a ball point pen or pencil as
shown on the right. To remove the
rough edges, press the s i d e o f t h e pen
or pencil against the inside and outside
edges of the disc.
Rough spots
on
outside edge
Ball point pen
or pencil
Rough spots
on inside
edge
Installation
NOTES:
Choose the mounting location where the unit will not interfere with the normal
driving function of the driver.
Before finally installing the unit, connect the wiring temporarily and make sure
it is all connected up properly and the unit and the system work properly.
Use only the parts included with the unit to ensure proper installation. The use
of unauthorized parts can cause malfunctions.
Consult with your nearest dealer if installation requires the drilling of holes or
other modifications of the vehicle.
Install the unit where it does not get in the driver ' s way and cannot injure the
passenger if there is a sudden stop, like an emergency stop.
If installation angle exceeds 30 from horizontal, the unit might not give its
optimum performance.
30
Avoid installing the unit where it would be subject to high temperature, such
as from direct sunlight, or from hot air, from the heater, or where it would be
subject to dust, dirt or excessive vibration.
-5-
Installation
Installation diagram
DASH BOARD
HEX NUT
METAL MOUNTING
STRAP
SPRING WASHER
PLAIN WASHER
CONSOLE
TAPPING SCREW
HEX BOLT
MOUNTING BRACKET
PLASTIC FRAME
MOUNTING BOLTS
MOUNTING BRACKET
-6-
Electric Connection
WIRING CONNECTION
LCH IN WHITE
VIDEO IN YELLOW
RCH IN RED
RADIO ANTENNA
AV IN
FRONT RCA AUDIO OUT L
FRONT RCA AUDIO OUT R
VIDEO OUTPUT 1
VIDEO OUTPUT 2
(WHITE)
(RED)
(YELLOW)
(YELLOW)
REAR CAMERA INPUT
YELLOW
SUBWOOFER GREY
KEY GROUND(BLACK)
KEY 1(BROWN)
KEY 2(WHITE)
FUSE
RED
IGNITION SWITCH(B+)
FUSE
MEMORY BACK-UP(B+)
YELLOW
BLACK
LIGHT GREEN
GROUND(B-)
AMP/ANT POWER CONNECT
FRONT
LCH SPK.
REAR
LCH SPK.
VIOLET/WHITE
(B+)12V
REAR CAMERA SWITCH
PARKING BRAKE
BLUE/WHITE
WHITE
GREY
WHITE/BLACK
GREY/BLACK
GREEN
GREEN/BLACK
VIOLET
VIOLET/BLACK
FRONT
RCH SPK.
REAR
RCH SPK.
NOTE:
1. Must use 4 ohm speakers.
2. After connecting parking brake input line, video on screen of control panel
will be displayed only after applying parking brake.
3. Before finishing wiring, do not attach control panel onto chassis.
-7-
Remote Control
Ref # Button
1
MOD
2
3&7
Function
Press it briefly to select a desired work source .
Press this button to turn the unit ON , press and hold to turn the unit OFF.
/
In Disc Playback mode, press for fast forward or back forward playback.
In Radio mode, press to scan step by step.
4
AS/
AS function see Scan operation.
In BT mode, press to receive a call.
5
PLAY/
PAUSE
In Disc Playback mode, press to pause playback. Press again to
start where playback stopped.
6&17
/
8
TITLE
When playing a Digital Video, pressing this button will open the TITLE
menu which is recorded on the media. When playing a VCD disc,
press this button to create a PBC (Playback Control) menu for the
disc to assist in making playback selections.
9
RPT/2
Repeat function for media playing;
In radio mode, press to select the store station 2.
10
DISP/1
In video playing mode, press to show OSD menu;
In radio mode, press to select the store station 1.
Press these buttons to skip ahead or back one track.
-8-
Remote Control
Function
Ref # Button
11
AUDIO/5 Same operation as audio.
12
MENU/4
In radio mode, press to select the store station 5.
13&21 VOL+/-
Press this button briefly to display the root level directory of a digital
video disc.
In radio mode, press to select the store station 4.
Use these controls to adjust the volume level.
14
SEL
Press the SEL(in radio mode,press and hold the SEL) to switch
between BASS,TREBLE,BALANCE, SWF VOL, SWF FREQ.
After switching on the desired mode above, rotate VOL knob to set it.
15
MUTE
Press this button to turn off the audio. Press again to restore the
sound to its prior volume level.
16
BAND/
In Radio mode, press this button repeatedly to switch between
the five radio bands: FM1 > FM2 > FM3 > AM1(MW1) > AM2 (MW2).
In BT mode, press to reject a call.
18
EQ
Press repeatedly to cycle through the different equalizer curve
presets you may wish to use for enhanced listening.
19
RDM/3
Random function for media playing;
In radio mode, press to select the store station 3.
20
SUB-T/6
In Digital Video Disc Playback mode, pressing this button will
allow you to change the subtitle language on discs which have
this as an option.
In radio mode, press to select the store station 6.
Preparing the Remote Control
Inserting the Battery
1.First push to inside as the direction indicated by the arrow (See 1 )And then
Remove the battery holder as the direction indicated by the arrow (See 2 ).
2.Replace the battery Set a new battery property with (+)side up as illustrated
(See 3 ).
3.Insert the battery holder. Push in the holder to the original position(See 4 ).
Using the Remote Control
Face the remote control towards the player front face IR mark (remote control signal
receiver).
Operation angle: About
30 degree in each the direction of the front of the IR mark.
Note :
The lithium cell in the battery compartment of remote control has been secured for
transport with a plastic . Before initial use please remove this plastic so that the
remote control is ready for operation .
-9-
Basic Operation
Main Menu Operation
In many modes, touch the
icon
or touch the
range to enter the
main menu, the message like following
as below.
(2)
10:00 AM
Setup interface 2
ADJUSTABLE ITEMS:
GENERAL
ANIMATION
2 MINUTE
KEY BEEP
(1)
ON
DISC
...
RADIO
...
(3)
General setup interface1
1. POWER icon
In any modes, touch the POWER icon
to switch the unit off .
2. When the unit is power on, tap to turn
off the display and the unit still work,
tap anywhere of the display to turn on
the display again.
3. SETUP icon
Touch to enter the SETTING mode,
the message will display as follow :
GENERAL
BLUETOOTH
ON
WALLPAPER
...
ABOUT
...
General setup interface2
ANIMATION
In RADIO mode, you can change the
playing time of animation among of
“OFF, 10S, 30S, 1M,90S, 2M, 3M and 4M ”.
Touch the “
” section on the
setting menu, touch the “
/ ”
ranges to select the adjustment item,
Touch the “
” icon to return to the
previous playback .
Note:
Please set the playing time of the
animation to “ 10S ” for the first, when
you turn the unit on .
KEY BEEP : ON or OFF.
Disc setup as follow:
DISC
FORMAT
Setup interface 1
-10-
AUTO
TV TYPE
16:9
RATING
ADULT
Basic Operation
FORMAT
This player is capable of playing discs
recorded in either PAL or NTSC formats.
Make the selection based on whether
you are connecting the unit to a PAL TV
or an NTSC TV. You can also set the unit
to AUTO (auto select). The disadvantage
to autoselect is that each time you turn
the unit on it checks to see what kind of
monitor is connected, which causes a
small delay and some flickering of the
display image which you may find
unpleasant.
Key in “1234” and then turn to rating
then you can setting as follow:
KID SAFE -> G -> PG -> PG-13
-> PG R -> R ->NC-17 -> ADULT
RADIO
ST/MONO: touch to select stereo or mono.
LOCAL: touch to select local or distant.
REGION: touch to select radio frequency.
TV TYPE
16:9
4:3 Letter Box
BT
Touch to select BT function on or off.
WALLPAPER
Touch to select wallpaper .
4:3 Pan Scan
ABOUT
Touch to show the version information.
This is to select the appropriate TV
aspect (4:3 or 16:9) according to the
connected TV set.
CLOCK SETUP
Touch the CLOCK to adjust the time and
time format.
Normal/PS (For 4:3 TV)
Played back in the PAN & SCAN style.
(If connected to wide-screen TV, the
left and right edges are cut off.)
Normal/LB (For 4:3 TV)
Played back in LETTER BOX style.
(If connected to wide-screen TV, black
bands appear at top and bottom of the
screen.)
clock setup interface
AUDIO SETUP
Touch the audio to turn to audio quality
adjustment.
Wide (For 16:9 TV)
Select when a wide-screen TV set is
connected.
RATING
Select to turn Parental Control on or off.
The factory default password is 1234.
(The password must be used to make
changes to the Parental Control
menu below .)
audio setup interface1 audio setup interface2
-11-
Basic Operation
TREBLE: -7 to +7
Adjust treble level .
-Adjustable when “NTSC “ is selected
for “NTSC/PAL “ .
BASS: -7 to +7
Adjust bass level .
LANGUAGE
Touch to select OSD language.
SUBWOOFER: touch to adjust subwoofer
volume and frequency.
ILLUMINATION COLOR
Touch to select the backlight for all
buttons. Tap auto icon the backlight
change automatically.
EQ: touch to select audio mode as follow:
USER -> JAZZ -> CLASSIC -> POP -> ROCK
LOUDNESS: touch to select loudness
effect as :OFF -> LOW -> MID -> HIGH
CALIBRATION
Touch the arrow as show to calibration
the display.
FADER/BALANCE:
BALANCE: R 0-10 to L 0-10
Reset Factory Settings
Adjust sound balance between left
and right speakers .
RESET button is placed on the housing
and must be activated with either a
ballpoint pen or thin metal object.
The RESET button is to be activated for
the following reasons:
A. Initial installation of the unit when
all wiring is completed.
B. All the function buttons do not operate.
C. Error symbol on the display.
FADE: F 0-10 to R 0-10
Adjust sound balance between front
and rear speakers .
VIDEO SETUP
RESET
RESET
Video setup interface
COLOR: 0 to 40
Adjust the color for the picture-lighter
or darker.
BRIGHTNESS: 0 to 40
Adjust if the picture is too bright or
too dark.
CONTRAST: 0 to 40
Adjust the contrast of the bright and
dark portion.
TINT: 0 to 40
Adjust the tint if the human skin color
is unnatural.
NOTE:
If RESET is selected, all memory data
will deleted, please re-adjust .
Rear View Camera
When connecting the rear view camera
the mirror image of the rear view is automatically displayed on the monitor
when you change the gear to the back
position.
(Note: additional monitor can not display
the image.)
-12-
Control Panel
Controls on Main Unit
3
4
5
8
9
2
10
11
6
7
12
1
13
Control Panel
14
15
16
Front View Drawing after Removing Control Panel
Top Front View Drawing after Flipping down Control Panel
1. AUX IN JACK
9. EQ BUTTON
2. SEL BUTTON and VOL KNOB
10. BAND BUTTON
3. POWER or SRC BUTTON
11. MICROPHONE
4. MUTE BUTTON
12. REL BUTTON
5. >|| or CH1~6 BUTTON
13. IR SENSOR WINDOW
6. OPEN BUTTON
14. DISC SLOT
7. USB PORT
15. EJECT BUTTON
8. RESET BUTTON
16. CARD SLOT
-13-
Control Panel
1. AUXILIARY INPUT JACK
Insert an external device to this AUX jack in order to have audio output of the
device through the unit.
2. SEL BUTTON & VOL KNOB
In normal mode, the VOL knob is used to increase or decrease the volume.
Press the SEL to switch between BASS,TREBLE,BALANCE, SWF VOL,
SWF FREQ.
After switching on the desired mode above, rotate VOL knob or press VOL+/
VOL- buttons to set it.
3.
/SRC BUTTON
In power off mode, press it to turn on the unit.
In power on mode, short press it repeatedly to select one mode of the RADIO,
DISC, USB, CARD, AUX , AV and BT mode; long p ress it to turn off the unit.
4 . MUTE BUTTON
Press it button to switch of the loudspeakers for a short period. The word MUTE
flashes in the display. Press it again to cancel the mute function. This function
can also be cancelled by rotating the VOL multifunction button.
5.
(PLAY/PAUSE) /CH 1-6 (RADIO PRESET)
A) In Disc Playback Mode
Touch this button to pause playback, touch again to resume playback.
B) In Radio Mode
Touch repeatedly to preset station. With this system a total of 30 stations can be
stored in the memory. Each band store up to six preset stations. The stations
might be FM1, FM2, FM3, AM1 (MW1) and AM2 (Mw2) band.
The operation as below:
-Store in Memory
> Select the frequency band.
> Touch repeatedly this range to select the desired memory key.
> Select the station.
> Keep the desired memory key touched in until the station is heard again
after a brief interruption.
-Retrieve a preset station
Touch repeatedly to retrieve a station which had been stored in the
memory in advance the chose number is shown on display.
-14-
Control Panel
6. OPEN BUTTON
Press this button to detach the control panel from the chassis .
7 . USB PORT
For information about connecting a USB device, please see USB operation.
8. RESET BUTTON
Press this button to return to factory settings.
9. EQ button
To select a desired preset EQ mode as: JAZZ, CLASSIC, POP , ROCK and USER.
10. BAND BUTTON
In Radio mode, press it repeatedly to select the desired radio band: FM1, FM2,
FM3, AM1(MW1), AM2(MW2) .
11. MICROPHONE
12. REL BUTTON
Press it to detachable the front panel.
13. IR sensor
14. DISC SLOT
15.
(EJECT) BUTTON
Insert the disc, label side facing up, until the mechanism senses its presence
and draws the disc in. Press it to eject the disc.
16. CARD SLOT
-15-
Touch Screen Operation
RADIO OPERATION
Listening to Radio
Briefly touch “
” to decrease frequency
by one step of channel spacing.
Touch the RADIO ICON in home menu
to enter the RADIO mode. In radio mode,
tap
icon to adjust the brightness for
the display .
Automatic Search
During Radio mode, touch and hold
(for more than 2 seconds ) either “ / ”
ICONS to start search for a radio station
automatically.
To tune in strong-signal FM
Station only (LO/DX function)
In radio mode, Press LOC button on the
icon to select
remote control or tap
select LOC/DX mode of Local and
Long-distance traffic news.
Storing and Listening to a
Memory Station
Setting Memory
87.50 101.70 98.10 87.50 107.9 100.8
Selecting The Frequency Band
Touch the screen of “ BAND ” section
repeatedly to select the band , the
message will show in turn :
FM1
FM2
FM3
AM2(MW2)
AM1(MW1)
When an FM stereo broadcast
is hard to receive
Press ST/MO button on the remote
control to select the MONO or STEREO
mode .
Start Searching For a Station
Manual Search
During Radio mode, briefly touch “
”
to increase frequency by one step of
channel spacing.
With this system, a total of 30 stations
can be stored in the memory of six
buttons. Each band stores up to six
preset stations. The stations might be
FM1, FM2, FM3, AM1(MW1), and
AM2(MW2) band.
The operation is as below :
- Store in Memory
>Select the frequency band
>Select the station
>Press and the station until it show
the frequency band your select.
- Retrieve a preset station
Touch the 1-6 ranges briefly to retrieve
a station which had been stored in the
memory in advance the chose number
is shown on display .
-16-
Touch Screen Operation
Automatic Memory Storing &
Program Scanning
REG FUNCTION
at certain times some stations divide up
their programs into regional programs
with varying content .
REG ON : the message “REG ON” will
appears in the display for a few seconds .
Note :
- the display capacity is limited . It is
possible that in the double display mode
some segments of the display are deleted .
- the function REG ON prevents the
radio from switching to alternative
frequency which have a different regional
program content .
Automatic Preset Setup
In Radio Mode, touch and keep (for more
than 2 ’ S) the screen of “
” range to
active automatic station storage.
The radio searches within the current
frequency band, e.g. FM 3 , for the stronger
signal level until the search
cycle has finished . The six strongest
stations are then allocated to the
corresponding storage locations .
Then the station of the first storage
location is set .
REG OFF : the program identification(PI)
of the regional program is ignored during
the search for an alternative frequency
(AF) or a program identification (PI) .
RADIO
Scan Function
In Radio mode, briefly touch the “
”
section on the touch screen , the radio
briefly plays all the preset stations of the
frequency band .
RDS FUNCTION
In home menu, then touch the “
ICON to enter the set mode, the
message in the display :
”
OFF
RDS AF
OFF
PI SET
Touch to change between PI MUTE and
PI SOUND .
PI MUTE / PI SOUND
STEREO
LOCAL
DX
REGION
USA
RDS REGIONAL
MUTE
RDS TA
Select RDS REGIONAL to turn RDS
function on or off.
RADIO
ST/MONO
RDS PI
ON
(only for radio operation)
I f you are in an area where two program
identifications (PI) overlap, you can
select the option PI SOUND and
PI MUTE for playback of the sound.
Alternate switching of the program
identification should be avoided .
ADJUSTABLE ITEMS:
REGION SET
Touch to switch the region area as:
EUROPE, USA, AMERICAN 1,
AMERICAN 2 and OIRT .
PI SOUND :
I f switching nevertheless occurs the
sound of another station is heard for
less than one second .
-17-
Touch Screen Operation
PI MUTE :
the sound of another station is
suppressed .
TA Traffic Announcement
Touch the AF section on touch screen or
swing and keep the SEL knob in the
TA/AF direction for about 2 seconds ,
the AF function is activated. The AF
symbol appears in the display .
(Priority For Traffic Information)
In Radio mode, touch the cursor button
to switch the TA function ON and OFF .
When the TA function is activated, the
TA symbol appears in the display .
During radio operation in one FM
frequency band the search for a traffic
announcement station is started
automatically (TA SEEK) .
If an FM station is being received which
transmits the latest traffic announcements from time to time, the TP display
lights up.
When the TA function is switched on ,
the FM traffic automatically interrupt
CD operation (the word TRAFFIC
appears in the display).
The volume level is increased to the
minimum value for the transmission of
traffic announcements.
After the traffic announcements has
finished, the program that was
previously running is resumed.
Interruption of the TA Function:
If you would like to interrupt the current
traffic announcement, touch the TA
section on screen briefly . This does
switch off the TA mode .
AF FUNCTION
(Alternative Frequencies)
In Radio mode, touch the cursor button
to switch the AF function ON and OFF .
When the AF function has been switched
on, the radio continuously tests the
signal strength of the AF frequency .
The test interval for each AF frequency
depends on the signal strength of the
current station and varies from a few
minutes in the case of weak signals.
Whenever the new AF frequency is
stronger than the station that is currently
tuned in , the radio switched to this
frequency for a short time for a short
time and the message
“NEW FREQUENCY “ is displayed for
one or two seconds.
PTY FUNCTION
In Radio mode, touch screen of “PTY”
range to select the Program type .
PTY Selection of the program type
besides the stations name, some FM
stations also transmit information on the
type of program. This information can
be displayed by your car radio .
Examples of such types of program are :
SPORT NEWS POP WEATHER ......
With PTY function you can specifically
select stations transmitting a particular
type of program. Touch the PTY on screen
repeatedly to call up the PTY selection
menu. The message “PTY SEEK” then
appears briefly in the display .
When PTY has been selected the radio
start searching for corresponding PTY
information and stops when the PTY
information has been found, “NO PTY”
appears in the display. If the PTY
information being searched for no longer
exists, the PTY function automatically
switches to normal mode .
AF is a function that works with the help
of RDS (Radio Data System) and can
only be used with FM stations. The radio
searches in the background for the best
frequency reception of the station that
has been tuned into .
-18-
Touch Screen Operation
Media Operation
In audio play mode, the message will
display as below :
(When Parking Brake is applied .)
To skip the next track
To skip the previous track
Repeat Function
Random Function
Previous menu
Tap to turn to BT PHONE mode.
(after pairing and connecting a
mobile phone with BT function).
In audio play mode, tap
icon to
adjust the brightness for the display .
The icons for other mode
(The same icon have the same function
in each mode)
Mute function
To select the Equalizer mode
Fast forward
Fast backward
In PHOTO playing ,tap to change
the photo direction.
Intro Function
ZOOM IN and OUT.
To decrease the volume level
For page turning.
To increase the volume level
For page turning.
Loudness Function
For page turning.
Subwoofer Function
For page turning.
Turning pre-switching for traffic
announcements on and off
For page turning.
Switching on and off an
Alternative frequency
Play/Pause the playing
-19-
Touch Screen Operation
BASIC OPERATION
SELECTING PLAY MODES
Pause (still picture)
During the Disc playback, select the
“RPT, RDM ” to select your favour
play mode.
Touch the “
” section on touch
screen during playback will stop
play temporary, touch it again to
return the normal playback .
1). REPEAT FUNCTION
FOR Digital Video :
Tap the
icon or press the RPT button
on the remote control to select REPEAT
mode as follows :
Rapid Forward/Rapid Reverse
During DISC playback, touch the
screen of “
/
” range the
speed of rapid forward/reverse
changes according to the disc as
follow:
CHAPTER REPEAT ON
REPEAT OFF
4x
8x
REPEAT ALL
FOR VCD/CD :
Tap the
icon or press the RPT button
on the remote control to select REPEAT
mode as follows :
Digital Video/VCD/CD/MP3:
Normal Playback 2x
TITLE REPEAT ON
20x
REPEAT ONE
REPEAT ALL
REPEAT OFF
Skipping Track
During DISC playback, Touch the
/
section on the touch screen
to skip to next/back one track.
FOR MP3 :
Tap the
icon or press the RPT button
on the remote control) to select REPEAT
mode as follows :
REPEAT ONE
Note :
For some VCD2.0 disc (PBC-playback
control), above these buttons may be
unavailable .
REPEAT OFF
REPEAT FOLDER(or DIR)
REPEAT ALL
2). RDM(RANDOM) FUNCTION
Zoom Function
Touch the button repeatedly,
the displayshow as “ zoom 2,
zoom 3, zoom 4 , zoom ½,
zoom 1/3, zoom 1/4 , zoom off . ”
Use the keys (
/
/
/
on
remote control to move the enlarged
picture .
During DISC playback, touch screen
of “
” section ( press the
RDM button on the remote control to
play in random. Each play mode the
order is different . (Depend on the
disc used for VCD).
Touch it again to cancel this function .
Note : in random mode, the
button
is not available .
-20-
Touch Screen Operation
ON-SCREEN DISPLAY FUNCTION
OSD
During playback, touch the
screen or press the DISP on the
remote control, it will display
the following as below :
Note: touch the screen or press the DISP
on the remote control again to cancel
the OSD information.
1. Digital Video , when it is on, it will
display the information such as:
T 001/004
C 001/001
the screen will display the following
message :
Touch
to select the adjustment
item, then select the item your favour
by touching the numberic buttons ,
then touch the OK to confirm .
MENU
FOR VCD (With PBC OFF) :
Touch the screen as show:
T 001/004
00:25:08
PBC
MIX
01:03:02
2. Example for VCD/SVCD, when it is on,
it will display the information such as:
3. Example for Movie or PHOTO .
When it is on, it will display the
information such as:
F 001/003
T 001/001
the screen will display the following
message :
Touch
to select the adjustment
item, then select the item your favour
by touching the numberic buttons ,
then touch the OK to confirm .
For Movie/Photo:
Touch the screen as show :
F 001/003
T 001/001
the screen will display the following
message :
DISC Search (GOTO)
FOR Digital Video :
Touch the screen as show :
Touch
to select the adjustment
item, then select the item your favour
by touching the numberic buttons ,
then touch the OK to confirm .
-21-
Touch Screen Operation
Digital Video Special Function
1. Multi-subtitle Language
Function (for Digital Video Only)
3. Multi-Angle Function
(for Digital Video Only)
During Digital Video playback.
Touch the
icon on touch
screen(or press the SUBT on
the remote) .
Each time the button is pressed or touch,
number of the subtitle language changes
in sequential order.
During Digital Video playback, touch the
icon on the touch screen .
Each time the button is pressed , the
number of the angel changes in sequential order .
Notes:
- The language number is different
according to the disc.
- Some discs only contain one subtitle
language.
- When no different subtitle language
are recorded, “ INVALID KEY ” will be
displayed at screen left top corner.
Notes:
- The angle number is different
according to the disc.
- The function only work for disc having
scenes recorded at different angles.
- When no different angle are recorded,
“ INVALID KEY ” will be displayed at
screen left top corner.
4. Title Menu Function
2. Multi-Audio Language Function
For Digital Video:
During Digital Video playback ,
touch the
icon on touch
screen.
Each time the button is touch , number
of the audio soundtrack language
changes on sequential order.
Notes:
- The language number is different
according to the disc.
- Some disc only contain one language
soundtrack
- When no different language soundtrack are recorded “ INVALID KEY ” will be
display at screen left top corner.
For Digital Video:
If the Digital Video has multiple titles
recorded on the disc. It can select
preferred title from the title menu to start
playback.
- During Digital Video playback, press
TITLE button on the remote .The title
menu is display.
- Select preferred title by the cursor
button and confirmed by press the
ENTER button .
For VCD/CD:
during playback, touch the AUDIO
section of the touch screen or Press
AUDIO on the remote . It is possible to
switch the sound between monaural
and stereo sound.
MONO LEFT
MONO RIGHT
MIX-MONO
STEREO
-22-
Touch Screen Operation
BT Operation
1. Pairing and Connecting
Prior to using the BT device named SSL DD889B as a hands-free system
for a BT-enabled mobile phone for the first time, you must pair and connect
them as follows:
*
Prior to pairing and connecting, when displaying No Video interface of radio,
CD, AUX IN or BT music, the logo BT flashes in the touch screen.
*
During operation of the device named SSL DD889B as a hands-free system
for a BT- enabled mobile phone, place the BT-enabled mobile phone no
more than 3 meters from the head unit;
Switch on the BT mode of your mobile phone; then s elect the item to find a BT
device and enter it; When it finds the BT device of the car A/V system, the name
SSL DD889B will be displayed , select and enter it; then it will show an interface
that asks you to input a password, input 0000 and enter it; then i t will pair and
connect with the BT device Boss Audio of the car A/V system, Confirm it, then
the frame of the BT logo will light all the time.
*
When finishing pairing and connect ing , the audio of the mobile phone transfers
to the car audio system whenever a call is made or received or the mobile phone
plays music .
2. BT PHONE
In power off mode, a incoming call or call out to wake up this unit and turn to BT
hands-free mode, when the phone call ended the unit back to power off mode.
1) Make a call
(1) Dial with mobile phone directly;
(2)Dial with the controls on BT PHONE interface or on remote control or on control
panel;
a. Touch the HANDSFREE icon in home menu or touch the
to turn to BT PHONE interface as follows:
icon during playing
: Same as MUTE button.
&
: Same as VOL+ and VOL- or
VOL knob.
: Tap to do disconnection.
-23-
Touch Screen Operation
b. Use the number icons or buttons to input your desired phone number;
* When inputting a wrong digit, use
c. After finishing inputting, touch
to dial out.
icon or < button to delete it.
icon or press
button on control panel
2) Redial last dialed phone number
Touch
icon to dial out the last dialed phone number.
3) Answer a call
During an incoming call, the incoming telephone number displays in the the BT
PHONE interface. If you want to receive it, touch
icon or press
button
on remote control; if you want to reject it, touch
icon or press
button
on remote control.
4) Switch the audio between the unit and your device
During phone talking using the BT hands-free system of the car A/V system,
touch
icon to switch the audio between the unit and your device.
5) Adjusting the volume during a call
During phone talking, use
and
icon or VOL knob or VOL+ and VOLbuttons to adjust volume level ; use
icon or MUTE button to mute sound .
*
* / # icons and buttons
they perform as * / # buttons on mobile phone.
3 . BT MUSIC
1 ) Touch STREAMING in home menu or pressing SOURCE button can pop up BT
MUSIC interface as follows:
-24-
Touch Screen Operation
Mute function
To select the Equalizer mode
To decrease the volume level
To increase the volume level
Loudness Function
Subwoofer Function
Turning pre-switching for traffic announcements on and off
Switching on and off an Alternative frequency
Play/Pause the playing
To skip the next track
To skip the previous track
Tap to turn to BT PHONE mode. (after pairing and connecting a mobile phone
with BT function).
In BT music mode, tap
icon to adjust the brightness for the display .
2 ) When using your mobile phone with the BT function to play audio/video , if it
is paired and connected to the unit, the audio of the mobile phone will change
into the car A/V system .
The Boss Audio supports A2DP, which enables the user to stream audio
from their device.
3 ) T he B T device of the car A/V system supports AVRCP, so these icons on the BT
Music interface except BT Music and their corresponding buttons on control
panel or on remote control are available for audio playback of your mobile phone
during playback. But n o fast forward/backward functions for
/
buttons,
and the function of resume playback after pausing or stopping is available
only for some mobile phone .
-25-
Touch Screen Operation
AUX Operation
On the front panel of this unit, there is an
AUX IN jack, follow the diagram below to
connect analogue replay devices(only
for the Audio connect, if you want to
connect the Video, please plug the
<Video input > on the back of the unit .) .
Use this jack to replay sound of other
replay equipment such as Digital Video
players, computers, etc. Via the loudspeakers.
AUX INTERFACE 1
1). Please connect the external device
with stereo jack (3.5mm)plug the Aux in
socket .
AUX IN JACK FRONT PANEL
AUX IN
AUX IN
AUX INTERFACE 2
Ground
Right
Left
3). You now hear the sound from the
external device played back through
the loudspeakers .
The function of the icons as follow:
Tap to mute the sound.
2). In radio mode, touch the screen
of “
” ICON to enter the main menu,
touch the “ AUX ” ICON to enter the
AUX IN mode.
Tap to select EQ as the same on the
remote control.
Tap to turn LOUD on or off.
In AUX mode, tap
to adjust the
brightness for the display .
Tap to select subwoofer frequency.
Tap to adjust audio volume.
Turning pre-switching for traffic
announcements on and off
Switching on and off an
Alternative frequency
Tap to turn to BT PHONE mode.
(after pairing and connecting a mobile
phone with BT function).
-26-
Touch Screen Operation
AV Operation
Please plug the <Video input >
on the back of the unit .
Touch the AV IN icon to enter the AV IN
mode.
In AV mode, tap
icon to adjust the
brightness for the display .
As the interface show, here is only the
audio output, now tap the
icon,
the picture of the auxiliary input video
show on the display and tap the display
again to turn to audio mode.
Now you can watch the video from your
External video equipment such as
Digital Video players, computers, etc.
Tap to mute the sound.
Tap to select EQ as the same on the
remote control.
Tap to turn LOUD on or off.
Tap to select subwoofer frequency.
Tap to adjust audio volume.
Turning pre-switching for traffic
announcements on and off
Switching on and off an
Alternative frequency
Tap to turn to BT PHONE mode.
(after pairing and connecting a mobile
phone with BT function).
Note: To ensure safety while driving and
to comply with lows, drivers should
not watch video or operate the
video device while driving.
AV INTERFACE 1
AV INTERFACE 2
-27-
Touch Screen Operation
USB OPERATION
SD OPERATION
Following the diagram below, connect
your USB device to the front panel
USB port . If it is properly connected,
the device will be mounted and start
playing automatically.
The unit can support playback MP3/WMA/
JPEG/MP4 format which are stored on
SD memory cards .
Please read the following instructions
before you start using a memory card .
Inserting the card as follow:
RESET
Label side
facing upward
USB
Insert a card, push in till heard a “CLICK”,
then attach the control panel again to play.
5
5
10:00AM
1
10:00AM
1
001
SONG
WEDDING
MOV03247.MPG
002
CIMG3080.MOV
003
004
005
2
3
4
2
3
4
1 Current type (highlighted bar) .
1 Current type (highlighted bar) .
2 Audio play mode select.
2 Audio play mode select.
3 Picture play mode select.
3 Picture play mode select.
4 Movie play mode select,
4 Movie play mode select,
5 Current play track .
5 Current play track .
-28-
Touch Screen Operation
STEERING WHEEL CONTROL
Touch the SWC icon as follow to turn to
steering wheel control .
Touch this icon to cancel the
input and resume load.
When electric resistance is too
low, touch this icon to increase.
When electric resistance is too
high, touch this icon to reduce.
10:00 AM
During setting, touch the
turn to home menu.
icon to
Before operation, press the
icon
to cancel the original input that to
set your favour.
There are 2 KEY for total 12 buttons to
save, first, tap Assign to open function
save, then select button 1 in KEY 1 on
steering wheel and tap the
icon, the
icon show in button 1 position then touch
Confirm, final exit the SWC mode,
the
function will save in button 1 of
KEY 1.
The function of the icons as follow:
Touch to begin function save.
After selection touch to confirm
operation.
-29-
Parental Control
*
Parental Control
Q: After inserting a Digital Video disc into the disc slot, if a dialogue box pops up
and asks you to input a password, what should you do ?
A: The playing disc is locked by a rating level of parental control. If the current
rating level of parental control of the Digital Video player is lower than the one
of current disc, you must input the correct password of parental control to
unlock the parental control and enter a rating level equal to or higher than one
of the current disc in order to play the disc.
*
For factory preset password of parental control of Digital Video player, please
see the part of Media Setup Menu.
Appendix: Parental Control
Parental Control function of a Digital Video player can control playback of
movie ratings on a disc. You can set the Digital Video player to be a certain
rating level of parental control using the Media Setup Menu. If the rating level
of parental control of a disc is higher than the one of the Digital Video player,
the Digital Video player cannot play the disc.
The Digital Video movie can be designed so that the Digital Video player can
play different versions of content of a particular movie according to the different
rating levels of parental control. Depending on the D igital Video features , the
scenes that are not suitable for children will be cleared or replaced by suitable
scenes automatically.
The rating levels of Parental Control are as follows:
1
2
3
4
5
6
7
8
Unlock
Kid Safe
G
PG
PG 13
PG R
R
NC 17
Adult
-30-
Region Code
*
Region Code
If you insert a disc into the disc slot and REGION ERROR is displayed, the car
multi-media system can not play the disc. The reason is that the region codes
of the car multi-media system and the used disc do not match each other.
Appendix: Region code of D igital Video
Motion Picture Association of America (MPAA) divided the world into 6 regions, and
gave every region a region code for locking and unlocking D igital Video playback.
Basically, a coded D igital Video player can play only the discs if its region code is the
same as the code of the D igital Video player. Otherwise, it cannot play the disc.
Please note that only the D igital Video discs and D igital Video players produced by
the 8 biggest film-making companies of America impose this restriction. The D igital
Video discs and D igital Video players not produced by the 8 biggest film - making
companies of America are not restricted by the rule of region code. Generally, they
are called Free Region Code or Full Region Code.
The problems caused by area code inconsistency has motivated the production of
unlocked version D igital Video players and recodable D igital Video players .
Region codes and the countries or areas represented by region codes are as follows:
Region 1: America, Canada, East-Pacific Inlands;
Region 2: Japan, West Europe, North Europe, Egypt, South Africa, Middle East;
Region 3: South-east Asian countries include Taiwan, Hong Kong, South Korea,
Thailand, indonesia, etc.;
Region 4: Australia, New Zealand, Central South America, South Pacific Inlands;
Region 5: Russia, Mongolia, Indian Peninsula, Middle Asia, East Europe, North
Korea, North Africa, North-west Asia etc.;
Region 6: China mainland.
The 8 biggest film - making companies of America are as follows:
1. WarnerBros;
2. Columbia;
3. 20thCenturyFOX;
4. Paramount;
5. Universal;
6. UA(UnitedArtist);
7. MGM(MetroDogwynMayer);
8. WaltDisney
-31-
Specification
Specification
General
Power Supply Requirement..................................................DC 12V
Current consumption........................................................10A MAX.
Maximum Power Output ........................................................ 4 x 85W
Audio
Signal Output ......................................... Front and Subwoofer Output
Frequency Response................................................... 20 Hz - 20 KHz
S/N Ratio ........................................................................... 90 dB (JIS)
Wow and Flutter ............................................ Below measurable limits
TFT Monitor
Monitor Screen Size .........................................................7 Inch Wide
Color System ..................................................................... NTSC/PAL
Disc/USB/SD
Compatible Format........................... DVD/VCD/IMAGE/MP3/WMA/CD
Radio
FM
Frequency range.....................................EUR (87.5 MHz - 108 Mhz)
USA (87.5 MHz - 107.9MHz)
American 1 (87.5 MHz - 108MHz)
American 2 (87.5 MHz - 108MHz)
OIRT(88.1 MHz - 107.9MHz)
Usable sensitivity.................................................................15dBu
I.F Frequency...................................................................10.7 MHz
AM(MW)
Frequency...............................................EUR (522 KHz - 1620 Khz)
USA (530 KHz - 1710 Khz)
American 1(530 KHz - 1710 Khz)
American 2(520 KHz - 1600 Khz)
OITR (531 KHz - 1602 Khz)
Usable sensitivity.................................................................40dBu
I.F Frequency....................................................................450 Khz
BT:
B T specification .............................................................. V1.2 Class 2
BT Supported Profiles ............. HSP, HFP and A2DP & AVRCP profiles
Range of frequency ................................................. 2.4GHz Spectrum
NOTE:
Specification and design are subject to modification, without notice,
due to improvements in technology.
-32-
Troubleshooting
Before going through the check list, check wiring connection. If any of the problems
persist after check list has been made, consult your nearest service dealer.
SYMPTOM
No power
CAUSE
SOLUTION
The car ignition switch is
not on
The fuse is blown
If the power supply is properly
connected to the car accessory
terminal,switch the ignition key
to "ACC"
Replace the fuse
Presence of disc inside the Remove the disc in the player,
then put a new one
player.
Disc can not be
loaded or ejected
Inserting the disc in reverse Insert the compact disc with
the label facing upward
direction
The disc is extremely dirty
or defective
Clean the disc or try to play a
new one
Temperature inside the car Cool off or until the ambient
temperature return to normal
is too high
Video/image
appears
black-white
No video/image
appears
No color in picture
The color system is
set incorrectly
Please switch to correct color
system from menu
The unit is not connected
to the parking brake
detection switch
Make proper connection
according to “ wire connection ”
The parking brake is not
engaged
For safety reasons no video/
images are displayed while the
vehicle is moving.
Engaging the parking brake will
cause images to be displayed.
The disc format is not
according to the TV-set
used (PAL/NTSC)
Please choose a proper color
system.
No JPEG files are recorded
Change the disc
on the disc.
JPEG files are not recorded Change the disc Record JPEG
files using a compliant
in a compliant format
application
Press the RESET button.
Unit has become
Unit has frozen up
Front panel is not properly fixed
unresponsive
into its place
The
antenna
cable
is
not
The radio does not
Insert the antenna cable firmly
connected
work
JPEG disc can
not be played
back
The signals are too weak
-33-
Select a station manually