Model: CCS-33B User Manual
Thank you for purchasing the Dayton Audio® 3-way Center Channel
Speaker. This speaker is specifically designed for use in home theater
surround sound systems. It uses two 3-3/4" polypropylene woofers, a
5/8" polycarbonate tweeter, and piezo supertweeter for extended highs.
This arrangement provides great sonic performance from
any listening position.
Connection: Use a high-quality wire to connect your speakers to your
amplifier; 16 or 18 gauge is recommended. Be sure to connect this
speaker with the same polarity as the rest of the system using the red
binding post as positive in all speakers in the system.
Placement: The center channel speaker should be located directly
in the center of the home theater system, either above or below the
viewing screen. For best sound, it should be located in the same plane
as the viewing screen, i.e. behind the TV.
Specifications: • Dual 3-3/4" polypropylene woofers with rubber
surrounds • 5/8" polycarbonate tweeter with ferrofluid • 5/8" piezoelectric
supertweeter • Frequency response: 100 – 20,000 Hz • Impedance: 8
ohms • Power handling: 80 watts RMS/120 watts max • Sensitivity: 87
dB 1W/1m • Dimensions: 4-1/2" H x 12-1/2" W x 6" D.
Dayton Audio products are warranted to be free of all defects in material and workmanship for 5 YEARS from the date of purchase from
an authorized Dayton Audio dealer. This warranty and all rights provided are limited to the original owner and are non-transferable.
Dayton Audio's responsibility is limited to replacement or repair as set forth in this warranty statement.
Should a product require warranty service during this period, Dayton Audio will repair or replace without charge, any part or product
proving defective in material or workmanship. All warranty repairs and service must be performed by an authorized Dayton Audio
technician or service facility. The use of non-authorized repair services renders this warranty null and void, and any charges relating
to non-authorized repair are the responsibility of the product owner.
All expenses related to replacing or repairing a defective part or product under this warranty shall be assumed by Dayton Audio.
Dayton Audio reserves the right to replace defective product with a new or factory reconditioned unit.
1. This warranty does not cover product failure or damage resulting from misuse, abuse, neglect, accidents, alterations, standard
environmental deterioration, natural disasters, or improper use and/or installation.
2. This warranty does not cover cosmetic damage due to misuse or neglect. This includes paint damage, scratches, cracks or other
superficial marks related to improper use.
3. Failures arising from attempted servicing of a non-authorized Dayton Audio repair facility or technician are excluded from this warranty.
In no event shall Dayton Audio be liable for consequential damages for breach of this warranty including installation charges, excessive
shipping expenses, property loss or other incidental loss. Some States do not allow the exclusion or limitation of incidental or
consequential damages, so the above limitation or exclusion may not apply to the buyer.
To obtain services under this warranty, the buyer shall contact Dayton Audio's authorized service provider, Parts Express, at
1-800-338-0531 x 780 to obtain a return authorization number (RA#).
The buyer must carefully pack the warranted product along with a copy of the original purchase receipt, the return authorization number
(RA#), and a description to the repair facility listed below. Shipping for warranty service is dependent upon the return policy where the
Dayton Audio product was purchased.
Parts Express
Attn: Dayton Audio Warranty Repairs RA# (please write your RA# here)
705 Pleasant Valley Drive
Springboro, Ohio 45066
This warranty gives you specific legal rights, and you may also have other rights which vary from state to state.
tel + 937.743.8248
Dayton Audio®
705 Pleasant Valley Dr.
Springboro, OH 45066
Last Revised: 4/12/2017