Description Applications Certifications Features

Sentry® Series
2’ LED Parking Garage Luminaire
LED Light Engine Lumens
LED Module
LG IT 50LED 4000K
Driver
LG 37W 520 mA
2-Rows
4,021 lm, 37W, 112lm/W
Housing
Compression molded self-extinguishing
fiberglass reinforced polyester compound
with UL 5VA flame rating (ASTM D635-74).
F1 rating.
Gasketing
En-Seal ™ continuous perimeter poured
gasket assures lens seal to housing.
Electrical Chassis
2ARS15 Shallow Crepe Acrylic lens, DC-2A die cast aluminum end
plug and tamper-proof stainless steel LSS-3TP latches shown
Description
Features
The Sentry® LED Parking Garage Luminaire
is a unique linear solution for modern
parking garages. LED boards are mounted
on an internal gear tray angled gear tray
and feature a specular, high reflectance
center “V” reflector for parking garage
distribution. A separate driver tray provides
thermal isolation for long driver life. The
Sentry housing is sealed against dust and
moisture and available with plastic (Celcon)
or (optional) stainless steel latches, and
wire-entry configurations.
•
•
Applications
•
•
•
•
Parking garages
Certifications
•
•
•
•
•
UL/cUL recognized component
Wet Location listed
IP65
40° C ambient temperature rating
when used with LGIT light engines.
F2202RLED-21B3 and F2202RLED21B4 fixture kit is DLC qualified.
•
•
Rigid one piece housing construction.
Two 1/4-28 brass studs molded into
back of housing for attachment of
optional mounting brackets.
En-seal™ gasketing provides superior
resistance to moisture absorption
versus conventional gasketing.
Lens retained by four suitcase style
latches.
Molded latch pockets compatible
with standard and tamper-proof
latches in Celcon, stainless steel, and
polycarbonate.
Gear trays secured to #10-32 brass
studs molded into housing via
threaded hex steel mounting standoffs.
LED Module tray available for two
rows of nominal 22” LED boards.
LED Module tray suspends from
housing by two security straps during
servicing.
Gear trays constructed of high reflectivity,
22-gauge, pre-painted steel.
Light Engine
50 diode LED module available in 4000K
from LGIT with 50,000 hour L70 life.
Constant current drivers with 0-10V
dimming to 10% and 120-277V input
available from LGIT.
Conduit Entry
Standard housings available with one 7/8”
conduit entry point on either or both ends.
Consult Sales for other opening sizes or for
top openings.
Lens
Inline thermal-formed lenses available in
shallow profile crepe pattern acrylic
Mounting
Standard stainless steel bracket
(BRKTS22PK) for surface or all-thread
pendant mounting or optional galvanized
steel bracket (BRKT 1) for surface mounting.
Consult Sales for cable mounting options.
Please contact A.L.P. for pricing and delivery.
All specifications subject to change without notice.
A.L.P. assumes no responsibility for these materials in
any luminaire or application.
The product is an OEM component kit requiring final
assembly by a qualified OEM fixture manufacturer.
A.L.P.
6333 Gross Point Road, Niles, IL 60714
Ph: (877) 257-5841 • Fx: (773) 774-9331
www.alpadvantage.com
© 2015 A.L.P. Lighting Components, Inc.
Sheet/REV#3 SENTRY2LEDPARK VN110317
Sentry® Series
2’ LED Parking Garage Luminaire
LED light source and luminaire specifications
EXPLODED VIEW
Latches (4)
Wire entry plug
(0, 1 or 2)
F2202RLED-21B3
Housing (1)
Driver Tray (1)
Specification
2’ Sentry
Input Wattage
35.43
Delivered Lumens (lms)
3671
Efficacy (LpW)
Standoff (2)
Angled LED
Module Tray (1)
Lanyard (2)
Reflector (1)
Color Rendering Index (CRI)
83.6
Color Temperature (CCT) k
4243
Dimming
0-10v
Rated Life (L70)
50000
Warranty
5 years
Voltage (V)
120-277v
Operating Frequency (Hz)
Lens (1)
103.63
50/60
UL
Yes
FCC
Compliant
17-1/2”
Opt. Back Hub Loc.
TOP VIEW
14-3/4” Stud
7”
26”
1/4 - 28 Brass Studs
SIDE VIEW
3-1/8"
26”
Note: Brass Studs on Inside of Unit are 10-32
END VIEW
1-3/8”
3-1/8”
4-7/8”
1-3/4”
1-3/8”
3-1/8”
2ARS_ Lens
5”
1-7/8”
6-5/8”
7”
6-5/8”
7”
Tapered Lens
Shallow Lens
A.L.P., assumes no responsibility for suitability of these
materials in any luminaire or application. Please test for fit and
function prior to ordering project quantities.
While A.L.P. utilizes IESNA testing procedures and believes our
testing results to be accurate, A.L.P. provides photometry for
reference only. Actual results will vary based on the actual
light source(s) and power source(s) used, i.e. ballast, driver,
generator, etc. and the combinations in which they are used,
as well as operating temperatures, and other electrical and
environmental variables. We urge that customers perform their
own fixture qualifications prior to making performance-based
claims. In no event will A.L.P. be liable for any loss or damage,
including without limitation, indirect or consequential loss or
damage in connection with the use of this information.
2ARS_
Shallow Acrylic Crepe
A.L.P. Lighting Components, Inc.
6333 Gross Point Road, Niles, IL 60714
Notice
Ph: (877) 257-5841 • Fx: (773) 774-9331
www.alpadvantage.com
© 2015 A.L.P. Lighting Components, Inc.
Sheet/REV#3 SENTRY2LEDPARK VN110317
Sentry® Series
2’ LED Parking Garage Luminaire
HOUSING (Select One)
Contact Sales to order housing with top holes, 1-1/8” or 1-1/4” holes
Part Number
Description
IP Rating
End Wiring Holes
2F-2-GTBS
IP65
7/8” on both ends
2’ Sentry® Series
Housing
GEAR TRAY (Select one)
Part Number
Description
2’ Sentry 2-board row 37º angled LED module gear tray
SENTGT2P38LED
CENTER REFLECTOR (Select one)
Part Number
Description
SENTGT2-LED-R
2’ Sentry LED Parking Garage Center Specular V-Reflector
LED DRIVER GEAR TRAY (Select one)
Part Number
Description
SENTGT2-LED-B
2’ Sentry LED driver gear tray
LATCHES (Select four)
Part Number
Description
LCW
White Celcon latch
LCWTP3
Tamper-proof white Celcon latch with nut and screw
LPC
White polycarbonate latch
LPCTP3
Tamper-proof white polycarbonate latch with nut and screw
LSS-3
Stainless steel latch
LSS-3TP
Tamper-proof stainless steel latch with nut and screw
WIRE ENTRY PLUGS (Select none, one or two depending on housing selected)
Part Number
Description
FEPW
White 7/8” dry location plug
LTP088
White 7/8” liquid tight plug
DC-2A
7/8” die cast aluminum fitting assembly for 1/2” rigid conduit1
FQC WOG-S
Flexible quick connector for 1/2” EMT. See FMC sheet for other configs.2
LENS (Select one)
Part Number
Description
2ARS_
2’ Shallow acrylic lens in crepe pattern. Indicate 00 for 50% DR, or 15 for
15% DR.
HOUSING MOUNTING BRACKET (Select one)
Part Number
Description
BRKTS22PK
Sentry stainless steel strap bracket, 2-pack
BRKT 1
External stud mounting bracket
MISCELLANEOUS PARTS
Part Number
Description
10-32MFSTANDOFF Threaded hex steel mounting standoff for 1-row LED module gear tray 3,4
LANYARD
White Celcon security strap, 2-pack
NUT1001
#10-32x3/8” steel hex locking nut for TRAYLAT attachment to housing
SCR4001
#4-40 x .250” LED board screws (4 required per 2’ LED board)
SC8GND
#8-32x3/8” green ground screw
OPTIONAL LED DRIVERS (Select one)
Part Number
Description
LGITDRV-37W
LGIT 37W, 520mA driver. 120-277V, 0-10V dim.
OPTIONAL 2’ LED MODULES (Select two)
Part Number
Description
LGITLED50-40K
LGIT 50 LED, 4000K Board 5
OPTIONAL ACCESSORIES
Part Number
Description
TAMPER BIT 3
Driver bit for TAMPERPRUF screw used in LCWTP3, LPCTP3, & LSS-3TP
TAMPER BIT 8
Driver bit for tamper-proof snake eye drive screw, compatible with LSS-3
Qty/Case
30
Qty/Case
500
GEAR TRAYS
SENTRYGT2-LED
DRIVER TRAY
Qty/Case
250
SENTGT2-LED-B
CENTER REFLECTOR
SENTGT2-LED-REF
LATCHES
Qty/Case
30
Qty/Case
80
100
LCW
LCWTP3
LPC
LPCTP3
LSS-3
LSS-TP3
WIRE ENTRY PLUGS
FEPW
LTP088
DC-2A
FQC WOG-S
+ FQC-WG
LENSES
2ARS_
HOUSING MOUNTING BRACKETS
BRTKS22PK
Ordering Notes:
1. Apply silicone sealant to internal threads for wet location use
2. Requires housing with 1-1/4” end opening(s); c
Contact Sales
3. Requires NUT1001 nut.
4. Two required
5. 3000K, 3500K and 5000K CCT available by special order. See Customer Service
BRTK 1
MISCELLANEOUS PARTS
LANYARD
STANDOFF
OPTIONAL ACCESSORIES
Quantities are one each unless otherwise indicated.
TAMPER BIT 8
A.L.P. Lighting Components, Inc.
6333 Gross Point Road, Niles, IL 60714
Ph: (877) 257-5841 • Fx: (773) 774-9331
www.alpadvantage.com
TAMPER BIT 3
© 2015 A.L.P. Lighting Components, Inc.
Sheet/REV#3 SENTRY2LEDPARK VN110317
Sentry® Series
2’ LED Parking Garage Luminaire
LED PARKING GARAGE FIXTURE KIT ORDERING
Series
Module Configuration
F220 = 2’ Sentry
Housing
2RLED = 2 LED Board Rows
-
Gear Tray
Driver
LED Module
Lens
2 = 37 ° Angled
Gear Tray
1 = LGIT 37W
520 mA driver
B = LGIT 50
LED 4000K
module
1
2
4
5
6
7
=
=
=
=
=
=
2PPS00 2’ Shallow Prismatic Polycarbonate
2ARS15 2’ Shallow Crepe Acrylic, 15% DR
2ARS00 2’ Shallow Crepe Acrylic, 50% DR
2MTARSMI 2’ Tapered Acrylic, 15% DR
2MTARSHI2’ Tapered Acrylic, 50% DR
2MTARSLED 2’ Tapered Acrylic Frosted
DLC Qualified Kit Configurations -Application Category #5
• F2202RLED-21B2
For the most current listing of
DLC Qualified Products visit
the www.designlights.org.
A.L.P.
6333 Gross Point Road, Niles, IL 60714
Ph: (877) 257-5841 • Fx: (773) 774-9331
www.alpadvantage.com
© 2015 A.L.P. Lighting Components, Inc.
Sheet/REV#3 SENTRY2LEDPARK VN110317