LNP-601AGH-SFP - Antaira Technologies

Version 1.0
GIGABIT
PoE
SWITCH
INDUSTRIAL
LNP-601AGH-SFP
Quick Installation Guide
Introduction
Front Panel
Specifications
The LNP-601AGH-SFP is an unmanaged PoE Ethernet switch with P.S.E. Function.
It supports Power over Ethernet, a system to transmit electrical power along
with data, to remote devices over a standard twisted-pair cable in an Ethernet
network. The LNP-601AGH-SFP has 4 x 10/100/1000Base-T(X) P.S.E. (Power
Sourcing Equipment) ports. P.S.E. is a device (switch or hub for instance) that
will provide power in a PoE setup. The wide operating temperature range from
-40 oC to 70 oC satisfies most operating environments. Therefore, the switch is one of
the most reliable choices for PoE Ethernet application.
Industrial Unmanaged Gigabit PoE Switch
LNP-601AGH-SFP
Model Number
Physical Ports
Power Fault LED
4
10/100/1000Base-T(X) Port
in RJ45 Auto MDI/MDIX
1
100/1000Base-X SFP port
1
100/1000Base-X SFP Port
Ethernet Standards
Provides 4 x 10/100/1000Base-T(X) PoE (P.S.E.) ports
Supports P.S.E. based on IEEE 802.3at standard up to 30 Watts per port
SFP port supports 100Base-FX and 1000Base-X dual speed
Supports auto-negotiation and auto-MDI/MDI-X
Supports store and forward transmission
802.3 for 10Base-T
802.3u for 100Base-TX and 100Base-X
802.3z for 1000Base-X
802.3ab for 1000Base-T
802.3x for Flow control
802.3at PoE specification (up to 30 Watts per port for P.S.E.)
MAC Table
8K MAC addresses
Processing
Store-and-Forward
Fault
Port 6 Link/Act LED
6
1000M
IEEE
IEEE
IEEE
IEEE
IEEE
IEEE
P2
6
Technology
Features
P1
Power LED
10/100/1000Base-T(X) P.S.E.
Port with P.S.E.
6
100M
DIP Switch Select for Port 6
Green: Link/Act
Gigabit LAN Port
5
Amber: 10/100Mbps Link/Act
4
LED Indicators
Supports flow control
Green: Link/Act
Rigid IP-30 housing design
Power Indicator
Green: Power LED x2
DIN-Rail and wall mounting enabled
Fault I ndicator
Amber: Indicate PWR1 or PWR2 failure
10/100/1000Base-T(X) RJ45
port and PoE Indicator (P1~P4)
Green on the left for port Link/Act.
Green on the right for PoE power injected.
10/100/1000Base-T(X) RJ45
port Indicator (P5)
Green for port Link/Act.
Amer for 10/100Mbps Link/Act
100/1000Base-X SFP port
Indicator
Green for port Link/Act.
3
Green: PoE power injected
2
Power Connection Guide
1
DIP-Switch
PWR-2
1A@24V PWR-1
DC 50-57V
G
Frame Ground
V2- V2+
PoE
10/100/1000T
DIP-Switch 1
Power-1 failed warning : (ON) enable, (OFF) disable
DIP-Switch 2
Power-2 failed warning : (ON) enable, (OFF) disable
A
DIP Switch Function
(SFP speed Selection)
Fault contact
Relay
V1- V1+
Gigabit PoE Port
Relay output to carry capacity of 1A at 24 VDC
Description
DIP-1
DIP-2
OFF
OFF
1000Mpbs
Power
DIP Switch Select for
Power Alarm Relay Output
Power
Supply
50 VDC
V-
V+
V+
V-
Power
Supply
50 VDC
Warning
Device
+24V
Dual DC inputs 50~57VDC on 6-pin terminal block
Power Consumption(Typ.)
6.3 Watts (Power device not included)
Overload Current Protection
Present
Reverse Polarity Protection
Not Present
OFF
N.A.
ON
N.A.
ON
ON
1000Mpbs
Physical Characteristic
Enclosure
IP-30
Dimension (W x D x H)
26.1(W)x94.9(D)x144.3(H) mm (1.03x3.74x5.68inch.)
Weight (g)
395g
DIP Switch Function (Power Side)
Description
Environmental
o
o
o
o
Storage Temperature
-40 to 85 C (-40 to 185 F)
Operating Temperature
-40 to 70 C (-40 to 158 F)
Operating Humidity
5% to 95% Non-condensing
DIP-1
DIP-2
OFF
OFF
Power failure relay alarm disabled
Regulatory approvals
ON
OFF
PWR-1 failure, relay alarm enabled
EMI
FCC Part 15, CISPR (EN55022) class A
OFF
ON
PWR-2 failure, relay alarm enabled
EMS
EN61000-4-2 (ESD), EN61000-4-3 (RS), EN61000-4-4 (EFT), EN61000-4-5 (Surge),
EN61000-4-6 (CS), EN61000-4-8, EN61000-4-11
ON
PWR-1 or PWR-2 failure,
relay alarm enabled
Shock
IEC60068-2-27
Free Fall
IEC60068-2-32
Vibration
IEC60068-2-6
Warranty
5 years
ON
ON
OFF
GND
Power
Supply
QIG
Redundant Input Power
LNP-601AGH-SFP
PRINTED ON RECYCLED PAPER
Quick Installation Guide
Version 1.0
GIGABIT
PoE
SWITCH
INDUSTRIAL
LNP-601AGH-SFP
Quick Installation Guide
Installation
Industrial Unmanaged Gigabit PoE Switch
Communication Connections
Accessory
1000Base-T Ethernet Connection
DIN-Rail Install Step
Wall-mounted Install Step
1
6-Pin Terminal block
Dust Cover (RJ-45)
2
RJ45 (8-pin, MDI) Port Pinouts
Dust Cover (SFP)
3
Pin
1
2
3
4
5
6
7
8
MDI
BI_DA+
BI_DABI_DB+
BI_DC+
BI_DCBI_DBBI_DD+
BI_DD-
1
RJ45 (8-pin, MDI-X) Port Pinouts
Pin
1
2
3
4
5
6
7
8
8
MDI-X
BI_DB+
BI_DBBI_DA+
BI_DD+
BI_DDBI_DABI_DC+
BI_DC-
1
8
10/100Base-T(X) Ethernet Connection
RJ45 (8-pin) to RJ45 (8-Pin) Straight-Through Cable Wiring
4
Round Screw (M3 X3)
5
Switch Port
Straight-Through Cable
NIC Port
RJ-45
Connector
RJ45 Plug Pin1
RJ-45
Connector
Tx+
TxRx+
Rx-
Wall-mounted kit (for Slim Type)
3
6
1
2
3
6
1
2
Rx+
RxTx+
Tx-
RJ45 (8-pin) to RJ45 (8-Pin) Cross-Over Cable Wiring
6
25mm DIN-Rail kit
7
QIG
8
Switch Port
(NIC Port)
Cross-Over Cable
Switch Port
(NIC Port)
RJ-45
Connector
RJ45 Plug Pin1
RJ-45
Connector
(Rx+)
(Rx-)
(Tx+)
(Tx-)
Cable
Tx+
TxRx+
Rx-
3
6
1
2
1
2
3
6
Rx+
RxTx+
Tx-
(Tx+)
(Tx-)
(Rx+)
(Rx-)
100/1000Base-X SFP Port Connection
LC-Port Pinouts
LC-Port Pinouts
LC-Port to LC-Port Cable Wiring
Rx
Tx
Tx
Rx
Tx
Cable Wiring
Rx
Rx
Tx
Pin Definition
10/100Base-T(X) PoE P.S.E.
Port
Packing list
1000Base-T PoE P.S.E. Port
RJ45 Pin Definition
Model name
Front Panel
Model Description
Pin No.
Accessory
Aaxeon Technologies, LLC
LNP-601AGH-SFP
Copyright© 2011 Aaxeon
All rights reserved.
Website: www.aaxeon.com
QIG
LNP-601AGH-SFP
|
I
A
Industrial 6-port slim type unmanaged Gigabit
PoE Ethernet switch with
4x10/100/1000Base-T(X) P.S.E. and
1x10/100/1000Base-T(X) and
1x100/1000Base-X, SFP socket
1
5
X 1,
X 2,
2
6
X 5,
X 1,
3
7
X 1,
X 1,
4
8
X 8,
X1
eMail: info@aaxeon.com
PRINTED ON RECYCLED PAPER
Description
RJ45 Pin Definition
Pin No.
Description
#1
TD+ with PoE Power input +
#1
BI_DA+ with PoE Power input +
#2
TD- with PoE Power input +
#2
BI_DA- with PoE Power input +
#3
RD+ with PoE Power input -
#3
BI_DB+ with PoE Power input -
#6
RD- with PoE Power input -
#4
BI_DC +
#5
BI_DC-
#6
BI_DB- with PoE Power input -
#7
BI_DD+
#8
BI_DD-
Quick Installation Guide