destroyit® 2245

max.
DESTROYIT 2245
13
®
sheets
v 8.6" w
Innovative, compact deskside shredder with EASY-Touch
for intuitive operation.
Security level P-2
4 mm strip-cut (3/16 inch)
Sheet capacity:
10-12*
Security level P-4
3 x 25 mm cross-cut (1/8 x 1 inches)
Sheet capacity:
5-6*
Security level P-5
2 x 15 mm cross-cut (3/32 x 5/8 inches)
Sheet capacity:
4-5*
*Certified using 8 1/2" x 11" 20 lb. bond and recommended power supply.
Easy to use deskside shredder for environmentally conscious users. EASY-Touch multifunction switch element for
stand-by / stop (off) / reverse with integrated optical signals for the operational status of the shredder. Photo cell
controlled automatic start and stop. Automatic reverse and power cut-off. Zero energy standby mode: complete,
automatic disconnection from power supply after 30 minutes. Transparent safety flap in the feed opening as
additional safety element. Quiet, powerful and energy-efficient single phase motor. Double motor protection. High
quality, paper clip proof cutting shafts from special hardened steel with lifetime guarantee. Attractive shred bin
from impact-resistant plastic. Practical handle for lifting off the shredder unit from the bin. Magnetic switch for
automatic stop if the shredder unit is removed from the shred bin (2245 CC).
Specifications
Shred volume, gallons
5.3
Feed opening, inches
8.6
Electrical requirements, volts
115
Maximum horsepower
1/5
Dimensions (D x W x H), inches
8.4 x 13.6 x 16.8
Shipping weight, pounds
14 (sc), 16.5 (cc)
WWW.MBMCORP.COM
TEL: 800-223-2508
WWW.IDEAL-MBM.COM
TEL: 800-387-2528
DESTROYIT® 2245
Features
SOLID STEEL CUTTING SHAFTS
High grade, hardened steel cutting shafts
are milled in our Balingen factory and
warranted for life.
SAFETY FLAP
Safety flap in the feed opening is an
additional safety element to keep fingers,
ties, or other objects away from the
cutting shafts.
EASY-TOUCH MULTIFUNCTION SWITCH
Easy operation is guaranteed with the
EASY-Touch multifunction switch for
stand-by/stop (off)/ reverse and optical
signals for the operational status.
PRACTICAL HANDLE
A practical handle is integrated into the
design for lifting off the shredder unit
from the shred bin when full.
1
1) Super micro-cut shafts are covered by a one-year warranty.
All technical data is approximate and subject to change. © MBM Corporation, 9/2015.