TABLE OF CONTENTS
Pantone 300
Electric Strikes................................................................................................................3
Pantone 208
Electric Cabinet Locks ...................................................................................................4
Magnetic Locks .............................................................................................................5
Electrified Locks, Relays
and Timers
Relays and Timers .........................................................................................................7
Special Purpose Relays .................................................................................................9
Pantone 356
Transformers ...............................................................................................................10
Power Supplies ...........................................................................................................10
Illuminated Push Buttons ...........................................................................................11
Pantone 300 Mushroom Exit Switches ............................................................................................13
Medium Duty Switches ..............................................................................................14
Door Activation Devices
Vandal Resistant Switches ..........................................................................................15
Economy Push Buttons ...............................................................................................17
Pantone 208
Parts for Push Buttons ................................................................................................18
Hands-Free Switches ...................................................................................................19
Special Purpose Switches ...........................................................................................19
All-Active Push Plates .................................................................................................21
Pantone 356
Automatic Door Key / Toggle Switches .....................................................................22
Wireless Door Controls ..............................................................................................23
Mounting Posts and Boxes ........................................................................................25
Mounting Options and Compatibility Charts ..........................................................27
Key Switches and Parts / LED options .......................................................................29
Power Transfer Cables ................................................................................................32
Keypads .......................................................................................................................33
Key / Gate Switches .....................................................................................................35
Push Button Control Stations ....................................................................................36
Industrial Door and
Gate Controls
Ceiling Pull Switches ...................................................................................................36
Telephone Entry Systems............................................................................................37
Single Door Proximity Card Readers .........................................................................40
CCTV, Access Control
and Phone Entry
Invision 32 Access Control Systems ...........................................................................41
TR
DUS Y’S B
IN
T
ES
TH
E
Exit Watch™ – Covert Cameras ..................................................................................43
•
Product Index ..............................................................................................................44
Warranty, Terms and Conditions ...............................................................................45
PRO
D
U
SE
E
CT
PA
G
Y
D E LIV ER S
IL
E 46
A
FO R DET
Camden Door Controls
2
Pan
ELECTRIC STRIKES
Camden strikes are designed for various commercial and industrial applications. They are
precision engineered and UL1034 listed. All models are reversible for RH/LH doors and
are continuous DC operation. Four stainless steel faceplate options are available. Latch
monitoring is optional. Five year warranty.
10/14/18 Series are BHMA Grade 1 heavy duty strikes. Factory tested to 1.5 million cycles;
dual voltage and field selectable fail safe/fail secure operation. Deep latch cavity for use
with cylindrical lock sets. 14 series models are UL10C and Warnock Hersey fire rated.
EZ Fit™ models install in standard ANSI strike plate and are now both horizontally and
vertically adjustable. No cutting of frame required.
10 Series
(Shown with optional
latch monitoring)
BHMA GRADE 1, 10/14/18 SERIES
Description STRIKES COMPLETE WITH FACEPLATES
STRIKE ONLY
NO FACE PLATES
ANSI Square
4 7/8” x 1 1/4”
Model
Model Fail Safe/Fail Secure CX-ED1000 CX-ED1010 12/24V AC/DC
As above with CX-ED1000L CX-ED1010L latch monitoring
Fire rated/Fail Secure CX-EL1400 CX-EL1410 12/24V AC/DC
As above with CX-EL1400L CX-EL1410L latch monitoring
ANSI Round
4 7/8” x 1 1/4”
Model
Hollow Metal Door
6 7/8” x 1 1/4”
Wood Door
7 15/16” x 1 7/16”
Model Model
EZ Fit™
Model
CX-ED1020 CX-ED1030 CX-ED1040 CX-ED1850A
CX-ED1020L CX-ED1030L CX-ED1040L CX-ED1850AL
CX-EL1420 CX-EL1430 - -
CX-EL1420L CX-EL1430L - -
NEW
14 Series
Fire Rated
CX-EL1450A
CX-EL1450AL
20 Series are BHMA Grade 2, medium duty strikes. Reversible for RH/LH doors, and rated
for continuous DC operation.
BHMA GRADE 2, 20 SERIES
1850 Series
EZ Fit™
STRIKES COMPLETE WITH FACEPLATES
STRIKE ONLY
NO FACE PLATES
ANSI Square
4 7/8” x 1 1/4”
ANSI Round 4 7/8” x 1 1/4”
Model
Hollow Metal Door
6 7/8” x 1 1/4”
Wood Door
7 15/16” x 1 7/16”
Description Model
Model Model Model Fail Safe 12VDC
CX-EU2005 CX-EU2015 CX-EU2025
CX-EU2035 CX-EU2045 Fail Safe 24VDC
CX-EU2008 CX-EU2018 CX-EU2028
CX-EU2038 CX-EU2048 Fail Secure 8-16V AC/DC CX-EL2001 CX-EL2011 CX-EL2021
CX-EL2031 CX-EL2041
Fail Secure 12VDC
CX-EL2005 CX-EL2015 CX-EL2025
CX-EL2035 CX-EL2045
Fail Secure 24VDC
CX-EL2008 CX-EL2018 CX-EL2028
CX-EL2038 CX-EL2048
20 Series
22 Series is designed for use with rim or surface mounted exit devices. Suitable for wood
or hollow metal doors. Horizontally adjustable for optimal alignment and reversible for
RH/LH doors.
BHMA GRADE 2, 22 SERIES - STRIKES COMPLETE WITH FACEPLATES
Description
Model
Fail Secure, 12VDC CX-EL2255
Fail Secure, 24VDC CX-EL2258
22 Series
3
Product Guide I February 2011
ELECTRIC STRIKES
30/40 Series are BHMA grade 3 strikes. Adjustable keeper allows for easy installation. Reversible
for RH/LH doors, and rated for continuous DC operation. EZ FitTM models require no cutting of door
frame for installation, and are horizontally and vertically adjustable for EZ installation.
BHMA GRADE 3, 30 SERIES
STRIKES COMPLETE WITH FACEPLATES
STRIKE ONLY NO FACE PLATES
ANSI Square
4 7/8” x 1 1/4”
ANSI Round
4 7/8” x 1 1/4”
Hollow Metal Door
6 7/8” x 1 1/4”
Wood Door
7 15/16” x 1 7/16”
EZ Fit™
Description Model Model
Model
Model Model
Fail secure 8-16V AC/DC CX-EL3001 CX-EL3011
CX-EL3021
CX-EL3031
CX-EL3041 Model Fail secure 12V DC
CX-EL3005 CX-EL3015
CX-EL3025
CX-EL3035
CX-EL3045 CX-EL3855A
Fail secure 24V DC
CX-EL3008 CX-EL3018
CX-EL3028
CX-EL3038
CX-EL3048 CX-EL3858A -
30 Series
40 SERIES
STRIKES COMPLETE WITH FACEPLATES
STRIKE ONLY NO FACE PLATES
ANSI Square
4 7/8” x 1 1/4”
ANSI Round
4 7/8” x 1 1/4”
Hollow Metal Door
6 7/8” x 1 1/4”
Wood Door
7 15/16” x 1 7/16”
Description Model
Model ModelModel
Model Fail secure 8-16V AC/DC CX-EL4001
CX-EL4011
CX-EL4021
CX-EL4031
CX-EL4041
Fail secure 12V DC
CX-EL4005
CX-EL4015
CX-EL4025
CX-EL4035
CX-EL4045
Fail secure 24V DC
CX-EL4008
CX-EL4018
CX-EL4028
CX-EL4038
CX-EL4048
FACEPLATES - FIT ALL STRIKES EXCEPT
14 & 22 SERIES
Model
Description
CX-ESP1
CX-ESP2
CX-ESP3
CX-ESP4
ANSI Square, 4 7/8 “ x 1 1/4 “ square corners
ANSI Round, 4 7/8 “ x 1 1/4 “ rounded corners
Hollow Metal Door, 6 7/8 “ x 1 1/4“ rounded corners
Wood Door, 7 15/16 “ x 1 7/16 “ rounded corners
38 Series
EZ Fit™
PRODUCT NUMBERING GUIDE
GRADE
OPTIONS
40 Series
ModelDescription
CX-xxxDUR
Duranodic faceplate
CABINET LOCKS
CX-EL8000 and CX-EL8000L Cabinet Locks are ideal for locking drawers, medical storage,
lock boxes and display cases. These versatile locks can be installed in either the side or
front of drawers and doors. 12/24V, AC/DC operation. Field selectable fail safe/fail secure.
CX-EL8000 SERIES
Model
Description
CX-EL8000
Electric Cabinet Lock
CX-EL8000L Electric Cabinet Lock with latch monitoring contacts
CX-EL8000 Series
Camden Door Controls
4
Pan
MAGNETIC LOCKS
PRODUCT NUMBERING GUIDE
MAGNETIC LOCKS
• Compatible with all access/egress systems
• Aluminum/stainless steel casings are weather and vandal resistant
• On board MOV’s provide protection against voltage spikes and surges
• Assorted mounting brackets and filler plates available
TDS models are supplied with a Lock Sensor (Bond Sensor) to
indicate that the door is secure. The built-in timer eliminates the
need for add-on exit delay timers. Also included with TDS models:
door position switch, relay, and LED.
Model
Camden Exact
S - Surface
M - Mortise
T - Timer
CX–9 x x–xx x xx
0 - Mini Mag Lock
1 - Single Door
2 - Double Door
3 - Shear Lock
4 - Gate Lock
Description Current Draw
DS - L ock sensor, door
position switch, relay
& LED
03 - 300 lbs holding force
06 - 600 lbs holding force
12 - 1,200 lbs holding force
26 - 2,600 lbs holding force
Dimensions
1200 lbs Surface Mount CX-91S-12
Basic Single Door 500 mA @ 12 V 10 1/2” x 2 7/8” x 1 7/8” CX-91S-12TDS
c/w Adjustable Timer, 250 mA @ 24 V (267 mm x 73 mm x 48 mm)
Lock Sensor, Door status
Switch, Relay & LED
1200 lbs Surface Mount Double Doors CX-92S-12
Basic 2 x 500 mA @ 12 V 21” x 2 7/8” x 1 7/8”
CX-92S-12TDS
c/w Adjustable Timer, 2 x 250 mA @ 24 V (533 mm x 73 mm x 48 mm)
Lock Sensor, Door status
Switch, Relay & LED
600 lbs Surface Mount Single Door CX-91S-06
Basic 500 mA @ 12 V 9 7/8” x 1 7/8” x 1”
CX-91S-06TDS
c/w Adjustable Timer, 250 mA @ 24 V (251 mm x 48 mm x 25 mm)
Lock Sensor/Relay & LED
600 lbs Surface Mount Double Doors CX-92S-06
Basic 2 x 500 mA @ 12V 19 5/8” x 1 7/8” x 11/16”
CX-92S-06TDS
c/w Adjustable Timer,
2 x 250 mA @ 24V (498 mm x 48 mm x 17 mm)
Lock Sensor/Relay & LED
600 lbs Mortise Mount Single Door CX-91M -06
Basic 480 mA @ 12V 9” x 1 1/2” x 1 1/8”
CX-91M -06TLS c/w Adjustable Timer 240 mA @ 24V (229 mm x 38 mm x 29 mm)
& Lock Sensor/Relay
300 lbs Surface Mount CX-90S-03
Basic Single Door
360 mA @ 12 V 6 1/2” x 1 3/8” x 13/16”
180 mA @ 24 V (165 mm x 35 mm x 21 mm)
300 lbs Mortise Mount CX-90M-03
Basic 360 mA @ 12 V 8” x 1 3/8” x 13/16”
Single Door 180 mA @ 24 V (203 mm x 35 mm x 21 mm)
1200 lbs Surface Mount CX-94S-12LS
c/w Lock Sensor/Relay
Gate Lock
500 mA @ 12V
250 mA @ 24V
10 5/8” x 1 3/8” x 1 1/4”
(270 mm x 35 mm x 32 mm)
2600 lbs Shear Lock CX-93M-26LS c/w Lock Sensor/Relay 480 mA @ 12 V 9 1/16” x 1 1/4” x 1 1/16”
240 mA @ 24 V (203 mm x 32 mm x 27 mm)
• Ultra low current draw
• Compact mortise mount
• Self aligning
5
Product Guide I February 2011
MAGNETIC LOCKS
MAGNETIC LOCK ACCESSORIES
Model
Description
Dimensions
Armature Housing CX-0001
For 1200 lbs Magnet
7 15/16” x 3” x 5/8”
(202 mm x 76 mm x 16 mm)
CX-0011
For 600 lbs Magnet
7 15/16” x 2 3/16” x 5/8”
(202 mm x 56 mm x 16 mm)
Adjustable L Bracket CX-1001
For 1200 lbs Magnet
10 1/2” x 3” x 1 1/2”
(267 mm x 76 mm x 38 mm)
CX-1011
For 600 lbs Magnet
9 13/16” x 1 15/16” x 1 1/8”
(250 mm x 49 mm x 29 mm)
Set of L & Z Brackets CX-1002
For 1200 lbs Magnet
10 1/2” x 3” x 1 13/16” (267 mm x 76 mm x 46 mm)
6 5/16” 2 1/2” x 2 1/2”
(160 mm x 64 mm x 64 mm)
CX-1012
For 600 lbs Magnet
9 13/16” x 1 13/16” x 1 1/8” (250 mm x 46 mm x 29 mm)
6 3/16” x 2” x 2”
(160 mm x 51 mm x 51 mm)
Angle Bracket CX-1003
10 1/2” x 1 1/2” x 1”
For 1200 & 600 lbs Mags (267 mm x 38 mm x 25 mm)
Space Bar CX-1004
For 1200 & 600 lbs Mags
10 1/2” x 11/16” x 5/8” (267 mm x 17 mm x 16 mm)
Stainless Steel CX-1008
For 2600 lbs shear lock9 1/4” x 1 5/8” x 1 1/2”
Surface Mounting Kit (235 mm x 41 mm x 38 mm)
Glass Door CX-1013
Mounting Kit For 1200 and 600 lbs Mags, 7 1/4” x 2 7/16” x 1 1/4”
use on 1/2” or 3/4” (184 mm x 62 mm x 32 mm)
thick doors
Mounting Bracket/Spacer CX-AL005
For 600 lbs Mags9 7/8” x 1” x 3/16”
(251 mm x 25 mm x 5 mm)
Mounting Bracket/Spacer CX-AL015
For 1200 lbs Mags
10 1/2” x 1 9/16” x 1/4”
(267 mm x 40 mm x 32 mm)
REPLACEMENT PC BOARDS
Model
Description
CX-91S-06PCB
For 600 lbs. Magnet
CX-91S-06TLSPCB
For 600 lbs Magnet TLS/TDS
CX-91S-12PCB
For 1200 lbs Magnet
CX-91S-12TLSPCB
For 1200 lbs Magnet TLS/TDS
CX-91S-12PCBV2
For 1200 lbs Magnet
Dimensions
2 3/8“ x 1 3/4 “
2 3/8“ x 1 3/4 “
2 3/8“ x 1 3/4 “
2 3/8“ x 1 3/4 “
2 3/8“ x 1 3/4 “
(60 mm x 45 mm)
If you are unable to match the photos below with the Mag-lock PC board
that you need replaced, contact factory for assistance.
CX-91S-12PCB
CX-91S-12PCBV2
CX-91S-12TLSPCB
Camden Door Controls
6
Pan
REL AYS AND TIMERS
Exact provides a wide range of practical interface devices for use with mag locks and other
electrified door hardware. From basic timers to special purpose relays, we offer solutions
for banking, barrier free access, and high-security applications.
ADJUSTABLE TIME DELAYS
MicroMinder
Miniminder
Maximinder
Multiminder
Model
Application
Description
Specs
CX-1000/74
Ideal for (de) energizing an
electric strike or magnet for an
adjustable time, or for use with
automatic doors.
• Ultra compact design
•12-24 VAC/DC
• SPDT contacts rated
3 Amps @ 30 VDC
•Color coded leads &
plastic case
•Dimensions:
1 1/4” x 2 1/4” x 3/4”
(32 mm x 57 mm x 19 mm)
Compact board-only design
perfect for integration within
boxes or cabinets. Extends
time of strikes/electromagnetic
locks.
•Adjustable delay from
1 – 15 seconds
•12-24 VDC operation
High precision extended timer
uses dipswitches to adjust
time delay from 1 second to
4 hours. Sauna/whirlpool/lock
control are among its many
applications.
•Adjustable delay from
1 second – 4 hrs.
Multi purpose relay can extend
time on automatic door
operators. Wet input suitable
for use with radio controls on
apartment entry and fire alarm
panels. Delay-on-activate
feature is ideal for overhead
door or similar applications
which require a nuisance
delay relay.
•Adjustable delay from
1 – 30 seconds
With up to 8 flexible daily or
weekly (on/off) schedules, the
CX-247 can automatically
activate/de-activate electric
locks and magnets, automatic
doors; or control lighting or
energy management devices.
• 8 daily or weekly schedules
• Internal memory back-up
CX-1000/75
CX-1000/77 CX-1000/78
(Replaces
CX-1000/76
and
CX-1000/79)
7 Day Timers
CX-247-12
CX-247-24
CX-247H-12
CX-247H-24 7
Product Guide I February 2011
•Adjustable delay from
1 – 30 seconds
•Basic easy-to-operate
delay-on-release timer
•Dipswitch programming
for accuracy
•Normal / fail safe output
•Adjustable trigger delay
of 0 – 10 seconds
•Latching option
•Dipswitch programming
•SPDT contacts rated
2 Amps @ 28 VDC
•Dimensions:
29/32” x 1 5/8”
(23 mm x 41 mm)
•12-24 VDC
•SPDT contacts rated
5 Amps @ 30 VDC
•Dimensions: 2” x 3”
(51 mm x 76 mm)
•12-24 VAC/DC
•SPDT contacts rated
2 Amps @ 28 VDC
•Dimensions:
2 1/2” x 3 1/2” x 3/4”
(64 mm x 89 mm x 19 mm)
•LCD’s for visual relay status
• Easy to program / setup
• Extremely compact size
• H models feature
“First-Man-In” function
(holiday/snow day)
• 12 VAC/DC or 24 VAC/DC
models
• SPDT contacts rated 16 Amps
@ 30 VDC, N/O + N/C
• Dimensions:
2 3/8” x 2 3/8” x 1 1/4”
(60 mm x 60 mm x 32 mm)
REL AYS AND TIMERS
ADJUSTABLE TIME DELAYS (CONTINUED)
Pneumatic Time Delays
Model
Application
Description
CX-1085
Pneumatic time delays require
no electricity to operate and
work with most Camden key
switches (CX-1085) and exit
buttons (CX-1085M). The
timing range is 1 – 60
seconds, easily adjustable by
thumbscrew. Ideal for use
where fire/building codes
mandate non-electronic means
of egress.
• Pneumatic time delay
• 1 – 60 second timer
requires no power to operate • DPST form Z contacts,
• Used to de-activate magnetic N/O & N/C, rated
locks in an emergency
5 Amps @ 24V DC
CX-1085M
Specs
• Suitable for CM-1200/2200/3200/3500, CM-1000/1100/2000
Key Switches (CX-1085)
• Suitable for CM-4000-8000 • Select switch
models UL294 /
series Exit Switches
NFPA 101 Compliant
(CX-1085M)
DOOR INTERFACE RELAYS
Switching Network
Model
Application
Description
Specs
CX-SA-1
A versatile make/break relay,
the SA-1 features separate
triggers and multiple operating
modes, for smoke-evac or
uni-directional sequencing
applications.
• Momentary and extended
trigger
• 12-24 V AC/DC
• 3 operating modes
• noice filtering ensures
reliability
• 3 LED’s for visual confirmation
CX-12 Switching Network
Make/break relay will (de)
energize an electric lock, then
after an adjustable delay,
activate the operator relay.
Bi-Directional Door Sequencer:
Sequence two automatic doors
in both directions.
• 2 SPDT contacts rated 2 Amps@30 VDC
• 3 Timers: 1/4 – 30 seconds
• Dimensions:
4” x 3 1/2” x 3/4”
(104 mm x 88 mm x 19 mm)
• Bi-Directional Sequencing • 12/24 V AC/DC operation
Mode
• S PDT contacts rated 3
• 3 adjustable delays, up to
Amps @ 30V DC
30 seconds max.
• Input for connection to
• LED’s for visual display
• Accepts wet or dry inputs
telephone entry system
• One shot design for security
• Maintained output for • Dimensions:
smoke EVAC
4” x 3 1/2” x 3/4”
(104 mm x 83 mm x 19mm)
Camden’s Lock-Out Relay is used on Automatic Swing Doors to “Lock-out” the safety sensor during
the closing cycle of the door. Compatible with most safety sensors and door operators. When used
with a guard rail mounted safety beam, the lock-out provides maximum safety on swing doors.
LOCK-OUT RELAY
Model
Application
Description
Specs
CX-PC-6
(Replaces
PC-3 and
PA-5)
Dual function relay. First, as
a basic lock-out-relay (L.O.R.)
for header mount sensors
on full-speed or low energy
doors. Second, as a secondary
activation module (SAM) for
low-energy doors activated by
push button.
• Suitable for any automatic
door operator (even PAC)
• M
otor/Solenoid
Input 6-120 AC/DC
• L.O.R. is timer controlled
• 12/24V AC/DC operation
• SAM mode works with any
door mount sensor
• Door beam input
• Door position switch is
included
• 2 LED indicators
• 3 – 30 second timer
• Dimensions: 2” x 4” x 1”
(50 mm x 104 mm x 25 mm)
Camden Door Controls
8
Pan
REL AYS AND TIMERS
SPECIAL PURPOSE RELAYS
Dual Function
Model
Application
Description
Specs
CX-22
(replaces
CX-21)
Compact, user-friendly
dual-function relay designed to
• Micro-processor controlled
• 12 – 24 V AC/DC
• Wet/Dry Inputs
• 4 inputs – 2 Dry & 2 Wet
a) sequence two automatic doors in both directions, and
• Mode Selector switch
• 2 SPDT contacts rated
3 Amps @ 30 VDC
b) control restroom doors in shared-use facilities.
- Normally locked or unlocked • 3 Timers: 1 – 30 seconds
restroom doors
•D
imensions:
2 1/4” x 3 1/4” x 3/4”
- Fail safe or fail secure locks.
(57 mm x 83 mm x 19 mm)
• 3 adjustable timers
• 2 SPDT outputs
• LED’s for visual confirmation
NOW
FOR USE
ON BARRIER
FREE
RESTROOMS
Restroom
E
US
OR R
W F ARRIE
O
N NB E
E MS
O FRKit
Control
O
TRO
S
E
R
Multi-function Relay
9
Applications include barrier-free
restrooms in hospitals, nursing
homes, hotels; and vestibule
sequencing in libraries, shopping
malls, banks, restaurants etc.
• Use with:
CX-WC
Complete kit includes CX-22
Dual Fuction Relay, CM-400/8
‘Push to Lock’ Push Button, and
CX-MDC surface mount door
contacts
CX-WC1
Complete kit includes CX-22
Dual Function Relay, CM-400/8
‘Push to Lock’ Push Button,
CM-30C ‘Occupied When Lit’
illuminated sign, and CX-MDC
surface mount door contacts
CX-EMF-2
Camden Door Controls EMF-2
is our second generation
Mulit-function relay.
EMF-2 is designed to easily
and quickly handle a variety of
specialized door-control tasks
• ABM Vestibule Control (Banks)
CX-EMF-2M
Same as above
• Wall mount metal cabinet is • Dimensions:
lockable and has illuminated 12” x 7 1/2” x 3 3/4”
ON/Off switch for door status. (304 mm x 190 mm x 95 mm)
CX-EMF-2ABM
Same as above but configured
for ABM vestibules
• Wall mount metal cabinet is • Dimensions:
lockable and has two
12” x 7 1/2” x 3 3/4”
illuminated control switches.
(304 mm x 190 mm x 95 mm)
Product Guide I February 2011
• Microprocessor control
• Single door unsecured rest- • New Compact design
room in shared-use facility
• Accepts up to 8 Inputs
• Single door secured restroom • 5 Form C relay outputs
in shared-use facility
• 12-24V AC/DC
• Two-door unsecured
•
Plug-In connectors facilitate restroom in shared-use facility
wiring
• 2 / 3 door Airlock (with
• Dimensions:
auto-crossing)
6 3/4” x 2 15/16” x 1”
• 2 – 5 door Airlock
(172 mm x 75 mm x 25 mm)
• 2 door Mantrap
TRANSFORMERS AND POWER SUPPLIES
TRANSFORMERS
Model
Description
NIPPLE MOUNT
CX-TRN-2024
24 VAC, 20 VA nipple mount transformer
STANDARD MOUNT
CX-TRX-2012
CX-TRX-4024
12 VAC, 20 VA standard mount transformer
24 VAC, 40 VA standard mount transformer
FUSED, STANDARD MOUNT
CX-TRX-2024
24 VAC, 20 VA fused, standard mount transformer
PLUG-IN
CX-TRP-4012
CX-TRP-4016
CX-TRP-2024
12 VAC, 40 VA plug-in transformer
16 VAC, 40 VA plug-in transformer
24 VAC, 20 VA plug-in transformer
RECTIFIER
CX-5024
POWER SUPPLIES
Model
Rectifier, (AC-DC Converter) 50 VA
Description
CX-PS13 V2
• Low cost linear power supply
• Battery charging
• Compact board-only design
•6 – 26 VAC transformer required
• Self-resetting fuse protection • 1 amp. max output
• 2-24 VDC
(dependent upon output voltage selected)
• 2 1/2” x 2 3/8” x 1 1/2”
(64 mm x 62 mm x 38 mm)
CX-PS10UL •UL 294, CSA, C22-2
•Enclosure accomodates:
• Latching fire alarm tie-in with reset one 12V DC/7 AH battery or
• 1 amp output two 12V DC/4 AH batteries*
• 12 or 24 VDC selectable
• 115 VAC power input
• AC power and status indicators
• Enclosure dimensions:
• Short circuit and terminal protection 8 1/2” x 7 1/2” x 3 1/2”
• Battery charger (400mA) (216 mm x 190 mm x 89 mm)
CX-PS30UL • UL 294, UL603, UL14B1, CSFM & MEA • 12/24 VDC output
• Multi-output power supply
• 2.5 Amp output (CX-PS30UL)
•Fire alarm & access control •Battery Charger (600mA)
•Trigger connections
•Enclosure accomodates:
• 5 individual circuit breakers two 12 V DC/12 AH batteries*
• Protected outputs
• 115 VAC power input
•AC fail supervision
• Enclosure dimensions:
•DC output and charger supervision 15 1/2” x 12” x 4 1/2”
(394 mm x 305 mm x 114 mm)
CX-PS60UL •6 amp output (CX-PS60UL)
* Batteries extra
Camden Door Controls
10
Pan
PUSH BUTTONS
ILLUMINATED PUSH BUTTONS
Camden offers the widest selection of illuminated push button switches to support any NFPA
compliant access control, ADA compliant automatic door, or industrial control application.
Panto
Illuminated Vandal Resistant push buttons are also available on page 15. CM-9600 series
buttons are supported with a lifetime warranty and feature piezoelectric sensor button, LED
illumination and a 40 second adjustable timer.
Need a custom version of an illuminated push button not shown in this price list? Contact our
customer service department today for a quotation.
CM-30C
CM-30 ‘Universal’ 2” Square Illuminated Push Buttons are supplied with a single gang stainless
steel faceplate, SPDT momentary switch, wide selection of label inserts, standard and
tamperproof mounting screws (with driver). LED bulbs, as well as DPDT switch optional.
‘UNIVERSAL’ ILLUMINATED EXIT SWITCHES
NEW
Model Description
CM-30U (12) English and Spanish insert labels, 12V - 28V incandescent
CM-30U/LED As above 12V - 24V LED
The most
insert labels
offered in
the industry
CM-30C (14) English and French insert labels, 12-28V incandescent CM-30C/LED As above 12-24V LED
CM-30U
UL294 & UL61058-1 Compliant
The
most
Save
$
insert
onlabels
our
offered
in
most
popular
the models
industry
Note: For DPDT switch, add ‘DP’ to product model numbers above: List $20.00
‘ECONOMY’ ILLUMINATED EXIT SWITCHES
Model
Description
CM-30E* Green switch, ‘Push to Exit’, 12-28V incandescent CM-30 OWL Green sign, ‘Occupied when Lit’, 12-28V incandescent *
Save $
on our
most popular
models
UL294 & UL61058-1 Compliant
CM-30EE Delayed Egress Switches offer all the features of CM-30 switches with a built-in
30 second electronic timer, and double break circuitry for additional safety. 12/24V operation.
SQUARE ILLUMINATED DELAYED EGRESS
Single Gang Faceplate
Description Model 2” green PUSH TO EXIT button, single gang,
deep in-wall mounting box included
CM-30EE*
Rectangular Green exit button, narrow style
*
–
Model –
CM-310EE UL294 & UL61058-1 Compliant
Pneumatic Egress Switches also available! Camden also offers mushroom push button
switches with built-in adjustable pneumatic timers to meet the requirements of NFPA 101.
CM-4085PTE (1 5/8” button) and CM-5085PTE (2 3/8” button) are ADA, UL294 & UL61058-1
Compliant. See page 13 for details.
11
CM-30 OWL
Narrow Faceplate
Product Guide I February 2011
American Disabilities Act Compliant
CM-30EE
CM-310EE
P
PUSH BUTTONS
CM-300 Series Rectangular Illuminated Switches are supplied with single gang or narrow
stainless steel faceplates. 1/2” x 3/4” illuminated buttons in red or green. Exit logo screened
under protective bezel. Momentary operation. Incandescent bulb operates on 12V or 24V DC.
RECTANGULAR ILLUMINATED
Description Single gang faceplate, SPDT momentary
As above ‘Push to Exit’
Narrow faceplate, SPDT momentary
As above ‘Push to Exit’
*
Red, Exit
Model
CM-300R
CM-300RPTE*
CM-310R
CM-310RPTE*
Green, Exit
Model CM-300G
CM-300GPTE*
CM-310G*
CM-310GPTE
CM-300
UL294 & UL61058-1 Compliant
CM-300 LETTERING OPTIONS
Description
Plain (no wording), delete E suffix
N/C
With SALIDA, add SA suffix
N/C
With Sortie, add S suffix
N/C
With Exit/SALIDA, add ESA suffix
N/C
With Exit/Sortie, add ES sufix
For other custom lettering, contact factory
N/C
CM-310
CM-310PTE
CM-3000 Series Illuminated Mushroom Push Button are supplied with large 1 5/8” red
buttons (green optional), incandescent bulb, (12/24V operation), heavy duty cast aluminum
faceplate, and contact block.
MUSHROOM ILLUMINATED
Description Single Gang Faceplate
Model Narrow Faceplate
Model Spring return, N/O, CM-3000R
SPST momentary
CM-3100R
Spring return, N/C, CM-3010R
SPST momentary
CM-3110R
Spring return, N/O and N/C, CM-3020R
DPST momentary
CM-3120R
Push/Pull, N/O SPST maintained
CM-3030R
CM-3130R
Push/Pull, N/C SPST maintained
CM-3040R
CM-3140R
Push/Pull, N/O and N/C, CM-3050R
DPST maintained
CM-3000
CM-3150R
UL61058-1, IEC 61058-2-4 and CAN/CSA-C22.2 Compliant
CM-3000 COLOR OPTIONS
Description
Red – standard
Green – add G suffix, instead of R
N/C
N/C
American Disabilities Act Compliant
Camden Door Controls
12
Pan
PUSH BUTTONS
Mushroom Exit Switches are available with spring return, push/pull, push/turn to release,
or key locking operation. Choice of switch configurations, including adjustable pneumatic
time delay. Supplied with a 1 5/8” or 2 3/8” mushroom button (red, blue or green), cast
aluminum or 18 gauge stainless steel faceplate, and contact block.
Panto
MUSHROOM EXIT SWITCHES – CAST ALUMINUM FACEPLATES
Single Gang Description
Narrow Faceplate
1 5/8” button
Model
Single Gang
1 5/8” button
Model
2 3/8” button
Model
S pring return,N/O, SPST momentary Spring return, N/C, SPST momentary
Spring return, N/O and N/C, DPST momentary
CM-4000
CM-4010
CM-4020
CM-4100
CM-4110
CM-4120
CM-5000
CM-5010
CM-5020
P ush/Pull, N/O, SPST maintained, red only
Push/Pull, N/C, SPST maintained, red only
Push/Pull, N/O and N/C, DPST maintained, red only
CM-4030
CM-4040
CM-4050
CM-4130
CM-4140
CM-4150
CM-5030
CM-5040
CM-5050
–
–
–
CM-5060
CM-5070
CM-5080
Push/Turn to Release, N/O, SPST maintained, red only
Push/Turn to Release, N/C, SPST maintained, red only
Push/Turn to Release, N/O and N/C, DPST maintained, red only
Spring return, DPST 1-60 second pneumatic time delay
Spring return, DPST 1-60 second pneumatic time delay, Push to Exit
Push to Lock, key to release, N/O, SPST maintained, red only
Push to Lock, key to release, N/C, SPST maintained, red only
Push to Lock, key to release, N/O and N/C,DPST maintained, red only
–
–
–
CM-4085
CM-4085PTE*
–
–
–
CM-4185
–
–
–
–
CM-5085
CM-5085PTE* CM-6030
CM-6040
CM-6050
COLORS: Add suffix to product number for button color: (R) Red, (B) Blue, (G) Green. If not specified RED will be supplied.
*
UL294 & UL61058-1 Compliant
ENGRAVING OPTIONS FOR CM-3000/4000/5000/7000/8000
Model
Description
CM-XXXX-E
Add “E” to product # for EXIT engraved (in white)
CM-XXXX-ES
Add “ES” to product # for the words EXIT and SORTIE engraved (in white)
CM-XXXX-ESA
Add “ESA” to product # for the words EXIT and SALIDA engraved (in white)
CM-XXXX-H
Add “H” to product # for wheelchair symbol
engraved (in white)
CM-XXXX-S
Add “S” to product # for SORTIE engraved (in white)
CM-XXXX-SA
Add “SA” to product # for SALIDA engraved (in white)
For custom engraving or screening, contact factory.
CM-5085PTE
CM-6000
CM-4100 (Shown with optional logos) CM-4000
13
Product Guide I February 2011
American Disabilities Act Compliant
P
PUSH BUTTONS
MUSHROOM EXIT SWITCHES - STAINLESS STEEL FACEPLATES
Single Gang Faceplates
­­­N/O Contact
Description
Model
N/C
Double Gang Faceplates
N/O and N/C
Model Model
N/O Contact Model
N/C
Model
N/O and N/C
Model
Plain faceplate, SPST
CM-400/1
CM-410/1
CM-420/1
CM-500/1
CM-510/1
CM-520/1
With wheelchair logo
CM-400/2
CM-410/2
CM-420/2
CM-500/2
CM-510/2
CM-520/2
ith wheelchair, Push to Open CM-400/4
W
and Automatic door logos
CM-410/4
CM-420/4
CM-500/4
CM-510/4
CM-520/4
With Push to Open
CM-400/6
CM-410/6
CM-420/6
CM-500/6
CM-510/6
CM-520/6
With Push to Exit
CM-400/7
CM-410/7
CM-420/7
–
–
–
With Push to Lock
CM-400/8
CM-410/8
CM-420/8
–
–
CM-520/8
–
–
CM-420E
–
–
CM-520E
P lain faceplate, EXIT engraved on button
COLORS: Add suffix to product number for button color: (R) Red, (B) Blue, (G) Green. If not specified RED will be supplied.
For narrow faceplate add (N) to product # e.g. CM-XXX/XN No Charge.
Ideal for use
with CX-22 on
barrier free
restrooms
CM-400/8
CM-500/2
CM-420E
CM7000/8000 Series provide excellent performance at competitive price points. Solid cast
aluminum faceplates with choice of recessed or extended 1” round buttons. CM-7000
series has protective collar around the button. CM-8000 button extends out from the collar
for easy access and activation. Pneumatic time delay available with both series.
MEDIUM DUTY SWITCHES
Recessed Button
Single Gang Faceplate
Model
Extended Button
Narrow Faceplates Single Gang Faceplate Narrow Faceplates
Model
Model
CM-7100*
CM-8000* Model
Spring return, N/O, SPST momentary
CM-7000*
CM-8100*
Spring return, N/C,
SPST momentary
CM-7010*
CM-7110*
CM-8010* CM-8110*
Spring return, N/O and N/C, DPST momentary
CM-7020*
CM-7120*
CM-8020* CM-8120*
Spring return, DPST 1-60
second pneumatic time delay
CM-7085 CM-7185
CM-8085
CM-8185
CM-8100
COLORS: Add suffix to product number for button color: (R) Red, (G) Green. If not specified RED will be supplied.
*
UL61058-1, IEC 61058-2-4 and CAN/CSA-C22.2 Compliant
American Disabilities Act Compliant
CM-7000
Camden Door Controls
14
Pan
PUSH BUTTONS
VANDAL RESISTANT SWITCHES
CM-9000 Series Switches are all-steel construction, set in a 1/4” thick aluminum plate. These
super tough, low profile switches can withstand attack of all types, even direct hammer
blows. Includes faceplate, 7/8” steel button, and security screws.
Panto
CM- 9000 SERIES MECHANICAL PUSH BUTTONS Jamb Width
Description
Model
DPDT momentary blank
CM-9180 DPDT, momentary ‘Push to Exit’
CM-9180PTE*
DPDT maintained blank
CM-9190
Single Gang
P
Model
CM-9080
CM-9080PTE*
CM-9080PTE
CM-9090
Add E to product #, for EXIT logo silk screened on faceplate.
Add H to product #, for WHEELCHAIR logo silk screened on faceplate.
*
UL294 & UL61058-1 Compliant
PIEZO Push Switches incorporate a patented non-moving one-piece design, which is
virtually impervious to attack or compromise. Tested to 50 million cycles for use under
extreme conditions, these sealed aluminum switches carry a LIFETIME WARRANTY.
They are extreme temperature rated -40 C° to +125 C° (-40 F° to +257 F°), with IP68
environmental protection.
Supplied with heavy duty stainless steel or cast aluminum faceplates and security screws.
CM-9180
NO MOVNG
PARTS
CM-9200/9300 Series are fully sealed piezo push buttons. These “1” round switches are
available in red or green, with either a single gang or jamb width stainless steel faceplate.
CM-9200/9300 SERIES PIEZO PUSH BUTTONS
Jamb Width
Red
Description
Mom, N/O, 0-24V AC/DC
Model
CM-9380R
Single Gang
Green
Model
CM-9380G
Red
Green
Model
Model
CM-9280R
CM-9280G
CM-9280
Add E to product #, for EXIT logo silk screened on faceplate.
Add H to product #, for WHEELCHAIR logo silk screened on faceplate.
CM-9380
15
Product Guide I February 2011
PUSH BUTTONS
CM-9600 Series illuminated piezo switches offer several added features, including an
integrated 40 second adjustable timer. Field selectable for fail safe/non fail-safe mode.
12/24 VDC operation with N/O & N/C outputs. May be set for green to red, red to green, or
non-illuminated to illuminated operation. Countless applications including REX, automatic
doors, building controls, and factory automation. Use optional cable to connect to access
control system, to indicate lock status.
CM-9600 SERIES PIEZO PUSH BUTTONS
Single
Gang
Narrow Faceplate
Description
Model
Model
Blank faceplate CM-9600/1
CM-9610/1 Wheelchair logo
CM-9600/2
CM-9610/2
Wheelchair/Push to Open CM-9600/4
CM-9610/4
PUSH TO LOCK
CM-9600/5
CM-9610/5
PUSH TO OPEN
CM-9600/6
CM-9610/6
PUSH TO EXIT
CM-9600/7
CM-9610/7
EMPUJE PARA ABRIR
CM-9600/8
CM-9610/8
POUSSEZ POUR SORTIR
CM-9600/9
CM-9610/9
CM-9610
CM-9600 SERIES PIEZO PUSH BUTTONS OPTIONS
Description
CM-9600/7
Red Illumination
Model
Cable for remote activation/control of LED
CM-9600/C
CM-9700 Series piezo switches offer the ultimate in protection against vandalism,
inclement weather, and abuse. Solid monoblock aluminum construction. No moving parts
to wear out. Solid state output (N/O). No power required to operate. Choice of single
gang or jamb widths. Supplied with green PUSH TO EXIT label. French, Spanish, wheelchair
labels on request (no charge).
CM-9700
CM-9700 SERIES PIEZO PUSH BUTTONS
Single Gang
Description
Model
Green, PUSH TO EXIT
Green, EMPUJE PARA ABRIR
Green, POUSSEZ POUR SORTIR
Blue, WHEELCHAIR LOGO
CM-9700
CM-9700SP
CM-9700F
CM-9700H
J amb Width (Narrow)
Model
CM-9710
CM-9710SP
CM-9710F
CM-9710H
CM-9710H
Camden Door Controls
16
Pan
PUSH BUTTONS
Economy Push Buttons feature a 1” red SPDT momentary snap-action button,
rated 20 AMPS @30V DC. Choice of stainless steel or plastic faceplates. Various
sizes and faceplate logos.
Panto
BLUE PLASTIC SURFACE MOUNT ENCLOSURES
Complete
Hard Wired
w/RF Transmitter
Description
Model
Model
Wheelchair logo
CM-150/2
CM-150/2RC
Wheelchair /PUSH TO OPEN/Automatic door CM-150/4
CM-150/4RC
PUSH TO OPEN
CM-150/6
CM-150/6RC
P
CM-150/4
UL61058-1, IEC 61058-2-4 and CAN/CSA-C22.2 Compliant
STAINLESS STEEL FACEPLATES
Narrow Jamb
Single Gang
Description
Model
Model
Plain faceplate
CM-250/1
CM-280/1
Wheelchair logoCM-250/2CM-280/2
Wheelchair/PUSH TO OPENCM-250/4CM-280/4
PUSH TO LOCK CM-250/5
CM-280/5
PUSH TO OPEN CM-250/6
CM-280/6
CM-250/5
PUSH TO EXITCM-250/7CM-280/7
POUSSEZ POUR SORTIRCM-250/8
CM-280/8
Wheelchair/SALIDACM-250/9CM-280/9
UL61058-1, IEC 61058-2-4 and CAN/CSA-C22.2 Compliant
ALUMINUM FACEPLATES - HORIZONTAL
CM-280/7
Narrow Jamb
Description
Model
Horizontal style, Wheelchair logo
CM-200/2H
Horizontal style, Wheelchair/PUSH TO OPEN
CM-200/4H
Horizontal style, PUSH TO OPEN
CM-200/6H
CM-200/6H
17
Product Guide I February 2011
PARTS FOR PUSH BUTTONS
N/O
CONTACT BLOCK/SWITCHES
Description
For CM-40/41/4
15A @30 V DC
Model
N/C
Model
N/O & N/C Model
DPDT
Model
–
–CM-45/10
CM-45/20
–
–
CM-60/10 –
–CM-45/10 CM-45/20
For CM-60
15A @30 V DC
CM-60/10
For CM-3000-8000
10A@30V DC
CM-4000/50NCM-4000/51N
Additional circuit
CM-4000/60NCM-4000/61N
REPLACEMENT BULBS AND LED’S
CM-4000/54N
–
12V DescriptionModel
Model
–
–
–
–
CM-7024
CM-7124
CM-7324
CM-7424
Blue
Model
Model
Illuminated mushroom (1 5/8”)
Illuminated mushroom push/pull
Mushroom (1 5/8”) spring return
Mushroom (1 5/8”) push/pull
Palm (2 3/8”) spring return
Palm (2 3/8”) push/pull
Locking palm (2 3/8”) w/keys
Round flush (1”)
Round extended (1”) Steel flush (7/8”) momentary
Steel flush (7/8”) maintained
Piezo round button (1”)
CM-3000/10N –
CM-3000/30N
CM-3000/15N –
CM-3000/34N
CM-4000/10N
CM-4000/20N
CM-4000/30N
CM-4000/15N
–
–
CM-5000/10N
CM-5000/20N
CM-5000/30N
CM-5000/15N –
–
CM-6000/10N –
–
CM-7000/10N –
CM-7000/30N
CM-8000/10N –
CM-8000/30N
CM-9000/10 –
CM-9000/15 –
–
CM-9200/10 –
Jamb Width
Model
Model
Model
Brushed aluminum
CM-3000/45
CM-3000/40
Torx security screws Torx security screws (box of 100)
Insert bit for Torx security screws
Close-up plug for Piezo Keypads (1)
Security key for CM 100 SS series keypads Snake eye tamper proof screws (Spanner Head) Snake eye tamper proof screws (box of 100) Insert bit for tamper proof screws CM-7000
Series
(Shown with
optional EXIT logo)
CM-8000
Series
TAMPERPROOF SCREWS AND BITS
CM-3000
Series
Single Gang
Description
Description
LED’S
Green
Description
FACEPLATES
CM-45/10
–
24V
Incandescent Bulb (12/24V) For CM-30 series
CM-30/32
Incandescent Bulb (12/24V) For CM-300 series
CM-300/31
Red LED (12/24V) For CM-3000 series
CM-3000/37R
Green LED (12/24V) For CM-3000 seriesCM-3000/37G
Red LED
CM-7012
Green LED
CM-7112
Bi-color LED
CM-7312
Amber LED CM-7412
BUTTONS Red –
Model
CM-1000/80
CM-1000/81
CM-1000/82
CM-1000/84
CM-1000/88
CM-1000-90
CM-1000/91
CM-1000/92
CM-3000/40
(Shown with
optional LED’s)
American Disabilities Act Compliant
Camden Door Controls
18
KEY SWITCHES
SPECIAL
PURPOSE SWITCHES
BY CAMDEN
Sure-Wave™ Hands-Free Switches offer the ultimate in performance, public health safety, and
convenience.
Sure-Wave™ is recommended for use in barrier-free applications, restrooms, hospitals and
clean rooms. Sure-Wave™ is also ideal for commercial and industrial applications where
hands-free activation is desired, such as drive-up windows, and kitchen doors in restaurants.
Sure-Wave™ features an operating range of 1-26”, adjustable time delay of 1-5
seconds, and provides superior performance in all ambient lighting conditions. Choice of
one-piece molded ABS or stainless steel faceplates. May be used in all weather conditions
and environments.
Sure-Wave™ operates on 12 – 24 V AC/DC, and has a heavy-duty 5 amp relay, ensuring
compatibility with all automatic door operators and electrified locks.
CM-324N
CM-324
CM-324 SURE-WAVE™ ABS FACEPLATES
Jamb Width
Single Gang Double Gang
Description
Model Model
Plain (blank faceplate)­
CM-324/1N CM-324/1 Model
CM-324/1W
Hand Icon CM-324/2N CM-324/2 CM-324/2W
Hand & ”Wave to Open”
CM-324/3N CM-324/3 CM-324/3W
CM-324 SURE-WAVE™ STAINLESS STEEL FACEPLATES
Single Gang Description
Model
CM-324W
NEW
Double Gang
Model
Plain (blank faceplate)­
CM-324/1S
CM-324/1WS
Hand Icon CM-324/2S CM-324/2WS
Hand & ”Wave to Open”
CM-324/3S CM-324/3WS
CM-324WS
Remote Door Release Switches may be easily mounted under desks / counters, or on walls.
Brushed aluminum NEMA box, or shallow black or beige plastic enclosures. Panel mounted
rocker switch – momentary or maintained versions.
ROCKER SWITCHES
Description
19
SPDT Momentary
Model
SPST Maintained
Model
NEMA box
CM-810
CM-820
Black Plastic
CM-830
CM-840
Beige Plastic
with Key Symbol
CM-850
Product Guide I February 2011
-
CM-810/820
CM-830/840
American
Disabilities
Act Compliant
American
Disabilities
Act Compliant
CM-850
Camden Door Controls
19
KEY SWITCHES
SPECIAL PURPOSE SWITCHES
Request-to-Exit Sensor utilizes passive infra-red technology. Dual pyros for increased
stability. Ceiling, wall or frame mounted. Adjustable coverage for single and double doors.
Adjustable 0.25-60 second timer, 2-24V AC/DC. Two form C relay outputs for activating
cameras, remote devices, door shunting or to de-activate mag lock in case of system
failure. Fail-safe or fail-secure operation
REQUEST -TO-EXIT SENSOR
White
Silver
Model
Model
CM-419W
CM-419S
CM-419W
Pull Stations for emergency release applications in blue and yellow. English, French, and
Spanish versions. Clear lift cover and glass-break rods optional.
BLUE PULL STATIONS*
1 x N/C
2 x N/C
1 N/O + 1 N/C
Description
Model
Model
Model
Pull for Door Release
CM-701
CM-702
CM-703
Pull in Case of Emergency CM-701E
CM-702E
CM-703E
As above English/French
CM-701BE
CM-702BE
CM-703BE
As above English/Spanish
CM-701SP
CM-702SP
CM-703SP
Pull for Emergency Assistance
CM-701EA
CM-702EA
CM-703EA
Pull for Emergency Door Release
CM-701EDR
CM-702EDR
CM-703EDR
CM-701
YELLOW PULL STATIONS*
1 x N/C 2 x N/C
Description
Model
Model
Pull in Case of Emergency CM-721
CM-722
*NOTE: Switch configurations indicated are when the pull station cover is closed/reset. When pull stations are released, switch contacts will be opposite to those indicated above.
CM-721
(Shown with
clear lift cover)
OPTIONS
DescriptionModel
For Clear Lift Cover Add
CM-XXXPC
Plastic Glass-Break Rods
(Pack of 10)
CM-700GL
American Disabilities Act Compliant
Camden
DoorDoor
Controls
Camden
Controls
20
Pan
ALL-ACTIVE PUSH PL ATES
All-Active Switches require minimal actuation force, and
meet ADA specifications. Constructed from stainless steel
or solid brass, with a choice of faceplate designs and
finishes. All models feature our exclusive buffed finish,
durable 4 stud design, and rubber dampers for smooth
and quiet operation.
Panto
CM-35
CM-25
CM-2520
CM-2510
(Mortise cylinder
sold separately)
P
JAMB WIDTH, SINGLE GANG AND DOUBLE GANG COMBO
SPST N/O
Jamb Width Description
Single Gang
Model
Double Gang Combo*
Vestibule Switch
Model
Model
Model
No debossing (plain face)CM-25/1
CM-35/1
CM-2510/1
CM-2520/1
Wheelchair logo – Blue
CM-25/2
CM-35/2
CM-2510/2
CM-2520/2
Wheelchair logo arrow left Blue
CM-25/2AL
-
-
Wheelchair logo arrow right Blue
CM-25/2AR
-
-
PUSH TO OPEN – Black
CM-25/3
CM-35/3
CM-2510/3
CM-2520/3
Wheelchair / PUSH TO OPEN – Blue
CM-25/4
CM-35/4
CM-2510/4
CM-2520/4
Wheelchair logo PTO arrow left Blue
CM-25/4AL
-
-
-
Wheelchair logo PTO arrow right Blue
CM-25/4AR
-
-
-
-
*Double Gang Combo includes SPST maintained key switch (on/off)
UL61058-1, IEC 61058-2-4 and CAN/CSA-C22.2 Compliant
CM-40
CM-46
CM-45
CM-41
CM-60
4 1/2” AND 6” SWITCHES
SPDT
4 1/2” Round
Description
No debossing (plain face)
Wheelchair logo – Blue
PUSH TO OPEN – Black
Wheelchair / PUSH TO OPEN – Blue
Wheelchair/Poussez Pour Ouvrir – Blue
Poussez Pour Ouvrir – Black
Push to Lock - Black
Push to Lock Door - Black
4 1/2” Round
4 1/2” Sq. Concealed
w/ Sq. Backplate
Mounting Screws
4 1/2” Sq. Exposed
Mounting Screws
Model
Model
Model
CM-40/1
CM-40/2
CM-40/3
CM-40/4
CM-40/5
CM-40/6
CM-40/8
CM-40/8D CM-41/1
CM-41/2
CM-41/3
CM-41/4
CM-41/5
CM-41/6
CM-41/8
CM-41/8D
Model
CM-45/1
CM-46/1
CM-45/2
CM-46/2
CM-45/3
CM-46/3
CM-45/4
CM-46/4
CM-45/5
–
CM-45/6
–
CM-45/8
CM-46/8
CM-45/8D
CM-46/8D
UL61058-1, IEC 61058-2-4 and CAN/CSA-C22.2 Compliant
21
Product Guide I February 2011
American Disabilities Act Compliant
6” Round
Model
CM-60/1
CM-60/2 CM-60/3
CM-60/4
CM-60/5
CM-60/6
CM-60/8
CM-60/8D
ALL-ACTIVE PUSH PL ATES
OPTIONS AND FINISHES
ModelDescription
CM-XXX-DP
Add DP to product # to order DPDT switch instead of SPDT switch
CM-XXX-WR
Add WR to product # for weather resistant boot
CM-XXX-WT
Add WT to product # for boot and water tight coating
CM-XXX-AL
Add AL to product # for arrow left
CM-XXX-AR
Add AR to product # for arrow right
CM-XXX-AB
Add AB to product # for antique brass finish (US5 / C5)
CM-XXX-PB
Add PB to product # for polished brass finish (US3 / C3)
CM-XXX-SB
ADD SB to product # for satin brass finish (US4 / C4)
CM-XXX-OB
Add OB to product # for oil rub bronze finish (US10B / C10B)
CM-XXX-MS
Add MS to product # for mirrored stainless steel finish (US32 / C32)
CM-XXX-AB
CM-XXX-PB
CM-XXX-SB
CM-XXX-MS
Automatic Door Key Switches, rotary switches, and toggle switches are available with
stainless steel or lamacoid faceplates, in 5 different switch configurations, and 11 faceplate
formats (English, French, and Spanish). Custom logos and wording available in any
language. All key switches are keyed alike. Keys are removable in all positions.
CM-XXX-OB
(Actual product finishes vary
from pictures above)
KEY SWITCHES
Lamacoid
Faceplate
Narrow Stainless
Steel Faceplate
Single Gang Stainless
Steel Faceplate
Description
Model
Model
Model
Off-Open momentary
CM-160/1
CM-170/1
CM-180/1
Off-Auto maintained
CM-160/2
CM-170/2
CM-180/2
ff-Auto-Hold Open O
maintained CM-160/3
CM-170/3
CM-180/3
Off-Auto-Hold Open-Exit maintained
CM-160/4
CM-170/4
CM-180/4
Off-Day-Night maintained
CM-160/6
CM-170/6
CM-180/6
CM-160/6
CM-170/6
UL61058-1, IEC 61058-2-4 and CAN/CSA-C22.2 Compliant
AUTOMATIC DOOR KEY / TOGGLE SWITCHES
ModelDescription
CM-130/4
4 position rotary switch, off/2 way/1 way/hold open
CM-190/1*
Toggle On/Off, mini aluminum faceplate
CM-190/2*
Toggle On/Off/Hold Open, mini aluminum faceplate
CM-190/4*
Toggle On/Off, single gang stainless steel faceplate
CM-190/5*
Toggle On/Off/Hold Open, single gang stainless steel faceplate
*
UL61058-1, IEC 61058-2-4 and CAN/CSA-C22.2 Compliant
CM-130/4
CM-190/2
Camden Door Controls
22
WIRELESS DOOR CONTROL
Lazerpoint™ RF is a completely new RF solution for automatic door operators and
introduces the many advantages of 915MHz. spread spectrum wireless technology.
The system encompasses the widest range of transmitters, receivers, activation devices and
switch enclosures available today. Lazerpoint RF™ has been designed to provide the very best
performance and value in new installations and is ‘backwards compatible’ for use in retrofit
upgrades with 300MHz., 318MHz., 390MHz. and 433MHz. daughterboards.
LAZERPOINT RF™ 915MHZ. SPREAD SPECTRUM
TRANSMITTERS AND RECEIVERS
NEW
CM-TX9
Transmitter
Model Description
TRANSMITTER
CM-TX-9
Wall Switch Transmitter, 915MHz.
RECEIVERS
CM-RX-91
Basic Single Relay Receiver, 12/24V AC/DC
CM-RX-92
Full Function Dual Relay Receiver, 12/24V AC/DC
OPTIONAL PLUG-IN RECEIVERS
CM-RX-DBB
300MHz. Daughterboard (blue antenna)
CM-RX-DBO
318MHz. Daughterboard (orange antenna)
CM-RX-DBR
390MHz. Daughterboard (red antenna)
CM-RX-DBW
433MHz. Daughterboard (white antenna)
SERVICE TOOL
CM-RFCT
Plug-in LED Cable Tool, 33”
CM-RX92
Receiver
CM-RX-DBB
318MHz. Narrowband Transmitters, Receivers, and Keypads avoid the high cost of running
wires to a push switch or key switch. Economical and durable.
318MHZ. TRANSMITTERS, RECEIVERS AND KEYPADS
Model Description
CM-TX-7iRM
Wall switch transmitter with instant response module (Pulse Extender)
CM-TX-8iRM
Micro transmitter for CM-25 series, fits CM-23D jamb box, lithium
battery included, with instant response module (Pulse Extender)
CM-TX-1
One channel, standard size, keychain transmitter
CM-TX-2
Two channels, standard size, transmitter
CM-TX-4
Four channels, standard size transmitter
CM-TX-1M
One channel, keychain transmitter
CM-TX-2M
Two channels, keychain transmitter
CM-RX-7
1 channel receiver, 10 code memory, 24 VAC/DC
CM-TX-480K
Wireless keypad, diecast case, illuminated, unlimited codes
CM-480C
RF receiver/controller for wireless keypads or transmitters, 12/24 V
AC/DC, up to 239 individual codes, or 480 block coded transmitters
CM-TX-1
CM-TX-4
CM-TX-2
CM-TX-1M
CM-RX-7
CM-480C
23
Product Guide I February 2011
American Disabilities Act Compliant
WIRELESS SWITCH PACKAGES
Lazerpoint RF™ packages are supplied with 2 TX-9 transmitters, 1 RX-91 receiver, 2 stainless steel
all-active switches, and 2 mounting boxes/enclosures. Lazerpoint RF packages are economical
to order and are neatly assembled in one box, assuring no missing parts on the jobsite.
NEW
Jamb Width Switch Packages (CM-25 Series)
Model Description
RF Package
CM-RFL252 Wheelchair Symbol + Surface Box
+
CM-RFL253 ‘Push to Open’ + Surface Box
CM-RFL254 Text and Symbol + Surface Box
CM-RFL253
4 1/2” Round Switch Packages (CM-40 Series)
CM-RFL402-47
Wheelchair Symbol + Surface Box
CM-RFL403-47 ‘Push to Open’ + Surface Box
+
CM-RFL404-47 Text and Symbol + Surface Box
CM-RFL402-49 Wheelchair Symbol + Flush/Surface Kit
CM-RFL403-47
CM-RFL403-49 ‘Push to Open’ + Flush/Surface Kit
CM-RFL404-49 Text and Symbol + Flush/Surface Kit
+
4 1/2” Square Switch Packages (CM-45 Series)
CM-RFL452
Wheelchair Symbol + Surface Box
CM-RFL403-49
CM-RFL453 ‘Push to Open’ + Surface Box
CM-RFL454 Text and Symbol + Surface Box
+
4 1/2” Square Switch Packages (CM-46 Series)
CM-RFL462 Wheelchair Symbol + Surface Box
CM-RFL453
CM-RFL463 ‘Push to Open’ + Surface Box
CM-RFL464 Text and Symbol + Surface Box
+
6” Round Switch Packages (CM-60 Series)
CM-RFL602-69
Wheelchair Symbol + Surface Box
CM-RFL603-69 ‘Push to Open’ + Surface Box
CM-RFL464
CM-RFL604-69 Text and Symbol + Surface Box
CM-RFL602-79 Wheelchair Symbol + Flush/Surface Kit
CM-RFL603-79 ‘Push to Open’ + Flush/Surface Kit
CM-RFL604-79 Text and Symbol + Flush/Surface Kit
+
CM-RFL603-69
NOTE: RECEIVER OPTION: Add ‘D’ to Switch Package # for CM-RX-92
Dual Relay Receiver in place of CM-RX-91.
+
CM-RFL603-79
American Disabilities Act Compliant
Camden Door Controls
24
MOUNTING OPTIONS FOR
ALL-ACTIVE SWITCHES
Pan
Mounting Enclosures Camden offers an extensive range of ABS plastic and metal boxes,
enclosures and trim rings for flush or surface mounting. ABS plastic models are flame
and vandal resistant suitable for use with radio controls. Chart below shows the most popular
configurations. See our switch compatibility chart on pages 27 and 28 for a complete listing
of mounting options and dimensions.
Panto
MOUNTING ENCLOSURES
­­­
ABS Surface Mount S/S Surface Mount
(To Fit) Switch Model Model
S/S Flush Mount Shallow Surface Kit Model
Model
Offset Jamb
Model S/S Dress Plate
P
Model
CM-25
CM-23
–
–
–
–
–
CM-25 (RF)
CM-23D
–
–
–
–
–
CM-2510/2520 CM-53
–
–
–
–
–
–
–
CM-35
CM-34BL CM-31
CM-40
CM-49
CM-40
CM-47S CM-59S –
–
CM-41
CM-43CBL*
–
CM-66
CM-48AL
CM-44
–
CM-45/CM-46 CM-43CBL*
–
CM-66
CM-48AL CM-44
CM-68AL
CM-64
–
CM-66
CM-66
–
CM-66
–
–
–
CM-60
CM-63CBL* CM-67
CM-60
CM-69S CM-89S –
–
CM-60
CM-79
–
–
–
–
CM-440
–
CM-660
–
–
–
* Weather resistant gasket available for outdoor use, CM-43G.
CM-31
CM-44
CM-440
CM-66
CM-67
CM-68AL
CM-660
CM-23
CM-23D
CM-34BL
CM-43CBL
CM-47S
CM-69S
CM-63CBL
Stainless Steel Escutcheons. For mounting 4 1/2” round (CM-40 series) and 6” round switches
(CM-60 series). Solid one-piece construction protects switch from vandalism and abuse.
STAINLESS STEEL ESCUTCHEONS
ModelDescription
CM-59S
For 4 1/2” round switches (CM-40 series)
CM-89S
For 6” round switches ( CM-60 series)
CM-89S
25
Product Guide I February 2011
American Disabilities Act Compliant
MOUNTING OPTIONS FOR
ALL-ACTIVE SWITCHES
Mounting Posts are available in 42” (38” switch height) and 48” (44” switch height) models,
constructed from 1/8” extruded aluminum. They are available in clear aluminum, dark
bronze anodized, and mill finishes (suitable for painting). Posts are supplied with a flame
and impact resistant ABS post cap, steel mounting base, and stainless steel mounting hardware. The rounded post cap is designed for safety and easy installation of Lazerpoint RF™
915Mhz. wireless transmitter and battery pack. An optional in-ground mounting base has
re-bar welded to the base and is supplied instead of the standard mounting base.
NOEDW
ELS
M
W
NE
D
O EL
M
MOUNTING POSTS
Aluminum Finish
Description
Model
Dark Bronze Finish
Model Mill Finish
Model
42”Single gang switch prep CM-42-BSU-CLR
48”Single gang switch prep CM-48-BSU-CLR
(Fits CM-35/40/41/45/46/60 series)
CM-42-BSU-BRZ CM-48-BSU-BRZ CM-42-BSU-MIL
CM-48-BSU-MIL
42” No switch prep
CM-42-CSU-BRZ CM-42-CSU-MIL
CM-42-CSU-CLR
(no cut-out)
In-ground mounting option All Models CM-42-IG
CM-42IG
(Optional)
In-ground
mounting
base
CM-42 BSU-BRZ
(CM-60/2 6” Push Plate
shown, sold separately)
ABS Plastic Escutcheons. Vandal and weather resistant low profile escutcheons for mounting
4 1/2” round switches (CM-40 series) and 6” round switches (CM-60 series). Constructed of high
impact, flame proof ABS. Patented 2-piece design and ideal for use with Lazerpoint RF™ wireless
transmitters. Front section (CM-49A / 79A) attaches to in-wall one gang, two gang, or 4 x 4 boxes.
Use CM-49B / 79B for surface mounting.
“SPACESHIP” ENCLOSURES
Model
Description
CM-49
Complete kit includes CM-49A, CM-49B, CM-49C adapter plate, and CM-49G gasket
CM-49A
Flush enclosure only (fits single gang box)
CM-49AK
Flush enclosure, adapter plate, gasket (fits single, double and 4x4 boxes)
CM-49B
Surface mount enclosure only (must be used with CM-49A)
FOR 4 1/2” ROUND SWITCHES
CM-49C
Adapter plate. For mounting CM-49A or CM-79A on double gang or 4 x 4 boxes
CM-49G
Gasket for CM-49A or CM-49B
CM-79
Complete kit includes CM-79A, CM-79B, CM-49C adapter plate, and CM-79G gasket
CM-79A
Flush enclosure only (fits single gang box)
CM-79AK
Flush enclosure, adapter plate, gasket (fits single, double and 4x4 boxes)
CM-79B
Surface mount enclosure only (must be used with CM-79A)
CM-49A
CM-49B
(Shown with optional
TX-9 Transmitter)
FOR 6” ROUND SWITCHES
CM-79G
CM-79A
CM-79B
(Shown with optional
TX-9 Transmitter)
Gasket for CM-79A or CM-79B
American Disabilities Act Compliant
Camden Door Controls
26
Pantone 208
Pantone 300
CAMDEN SWITCH & ENCLOSURE COMPATIBILITY CHART
0/2
19
or 180
0 / 1 M- 0
-19 C -17
CM
CM 160
CM 150
CM 30
-1
CM -60
CM *2
/46
-45 1 *2
CM M-4 0
C -4
CM 5
-3
CM EE
-30
CM -30
CM 5
-2
CM (F)
sh
Flu *3
or ial
S) ter
ce( a
rfa e M
Su osur
cl
En
Pantone 356Pantone 208
Dimensions
L x W x D (in)
4
CM-23
4 1/2 x 1 3/4 x 1 1/4PS
Pantone 356
CM-23D (suitable for RF)4 1/2 x 1 3/4 x 1 1/2PS44
Enclosure Photographs:
(not to scale)
Notes
Also fits...
Post
Round
Double Gang Enclosure
Single Gang Jamb
Enclosure
Box
Style Enclosure / Post
27
CM-34AL
4 3/8 x 2 5/8 x 2
A S 44
1
3
3
CM-34BL
4 /2 x 2 /4 x 1 /4 P S 44
CM-34D
3 x 2 1/4 x 3 1/2 P F4 4 4 4 4 4 44
CM-43CBL
5 x 5 x 2
P S 4 4
1
1
3
/
/
/
CM-444 2 x 4 2 x 4 S S 4 4
CM-48AL4 1/2 x 4 1/2 x 3/4 AS4 4
CM-53
5 x 5 x 2
P S4
CM-63CBL
5 x 5 x 2
P S44
CM-64
4 x 4 x 13/16
SS4
CM-66
7 x 7 x 2
S F4 4 4 4 4 4 44
3
/
CM-68AL / BZ
4 x 4 x 4
AS4
CM-47S5 diameterP S 4
CM-498 3/4 (S) / 7 (F) dia. P S/F 4
CM-59S7 diameter
PS4 CM-69S
6 1/2 diameter
PS 4
5
CM-79
9 /8 (S) / 8 (F) dia.PS/F 4
CM-899 diameter
SS 4
CM-42BSU / CM-48BSU *16 x 6 x 42/48
A 4 4 4 4 4 4 44
CM-42CSU / CM-48CSU *16 x 6 x 42/48
A 4 3
Jamb mount (1 /4” framing) 444 44
S ingle gang electrical box (Use CM-31 stainless steel sleeve on surface mount 1 gang boxes) 4 4 4 4 44
Double gang electrical box4 4 4 4 x 4 electrical box (use CM-67 stainless steel sleeve on surface mount 4 x 4 boxes)4 4 4
Box included w/switch44
Extra deep box required4 4
*1 CM-42BSU has a single-gang cutout. CM-42CSU has no cutout, and is suitable for mounting key switches, keypads, etc.
*2 The CM-49C Adapter plate allows single-gang mount switches (ie: CM-41/45/46) to mount to double-gang or 4 x 4 boxes. Adapter plate included with CM-60.
*3 Enclosure material Code: P = Flame retardant polymer, A = aluminum, S = stainless steel
CM-23 CM-23D CM-31 CM-34AL CM-34BL CM-34D
Product Guide I February 2011
CM-43CBL
CM-44
CM-48AL
CM-47S
CM-49
19
0/3
00
-50
CM 8085
to 00
85 /35
-40 00 00
CM -32 -31
CM CM 000
-3
CM 2520
/
10 200
-25 0/2
CM 200 1200
- /
CM 1100 000
- -1
CM CM -700
CM 500
CM 000
0/4
- 4 0 N/ W
CM 324/ EE
- 10
CM M-3 10
C -3
CM 00
-3
CM 80
-2
CM 250
CM 0/4
19
or
CM
Jamb
Box
Enclosure / Post
44 4NCM-23
44 4N4 CM-23D
CM-67
CM-68AL
CM-69S
CM-89S
CM-42/48
Enclosure Photographs:
(not to scale)
CM-66
Notes
CM-64
Also fits...
CM-63CBL
Post
CM-53
Round
NEW
Double Gang Enclosure
44 4 4N44
Jamb mount (1 3/4”frame)
Single gang electrical box
44 44 4444 (Use CM-31 s/s sleeve)
4 4 Double gang electrical box
4W 4
4 x 4 electrical box
4W(Use CM-67 s/s sleeve)
4Box included w/switch
44Extra deep box required
Single Gang
Enclosure
44 44 4444CM-34AL
44 44 4444 CM-34BL
44 4 4W 44444 4 CM-34D
4WCM-43CBL
4WCM-44
CM-48AL
444 CM -53
4 CM-63CBL
CM-64
4 CM-66
44 4 4 444 CM-68AL / BZ
CM-47S
CM-49
CM-59S
CM-69S
CM-79
CM-89
4 4 4 44444 4 CM-42BSU / CM-48BSU *1
44 4N44CM-42CSU / CM-48CSU *1
Camden Door Controls
28
KEYSWITCHES
KEY
SWITCHES
Pan
Heavy Duty Key Switches are available in surface or flush mount versions. Choice of
cast aluminum or industrial grade stainless steel faceplates. May be used with virtually
all mortise cylinders and cams. Quick and easy to install, Camden key switches are fast
becoming the industry standard. Complete units include faceplate, choice of switch,
cylinder lock ring, 2 socket/slotted screws, and 2 tamperproof screws. LED’s optional.
Mortise cylinders, keyed alike (KA) or keyed different (KD) sold separately. See P. 31 for
LED and cylinder options.
Panto
P
CAST ALUMINUM KEY SWITCHES
Narrow Single Gang (flush)
Single Gang
w/Surface Mount Box
Description
Model
Model
Model
SPST momentary, N/O
SPST momentary, N/C
SPST maintained
CM-2000
CM-2005
CM-2010
CM-1100
CM-1105
CM-1110
CM-1000
CM-1005
CM-1010
SPDT momentary
SPDT maintained
(2) SPDT momentary
(2) SPDT maintained
SPDT momentary and
SPDT maintained
CM-2020
CM-2030
CM-2050
CM-2060
CM-2070
CM-1120
CM-1130
CM-1150
CM-1160
CM-1170
CM-1020
CM-1030
CM-1050
CM-1060
CM-1070
DPDT momentary
DPST 1-60 second pneumatic time delay
DPDT maintained
CM-2080
CM-2085
CM-1180
CM-1080
CM-1185
-
CM-2090
CM-1190
CM-2000 (Shown with optional
LED’s. Mortise cylinder
sold separately)
CM-1100 CM-1090
(Shown with optional
LED’s. Mortise cylinder
sold separately)
UL61058-1, IEC 61058-2-4 and CAN/CSA-C22.2 Compliant
Single piece, diecast construction
Heavy duty aluminum faceplate
Switch bracket
with NEW elongated
mounting holes
accommodates
1”- 1 1/4” mortise
cylinders, including
Medeco and Best IC
Core cylinders.
29
Product Guide I February 2011
May be used
with any type of
cam
CM-1000 Accepts one or
two switches
American Disabilities Act Compliant
(Mortise cylinder
sold separately)
Camden Door Controls
29
KEY SWITCHES
KEY SWITCHES
STAINLESS STEEL KEY SWITCHES
Narrow
Single Gang
Description
Double Gang
Double Gang
Dual Cylinder*
Model Model
Model
Model
SPST momentary, N/O
CM-2200
CM-1200
CM-3200
CM-3500
SPST momentary, N/C
CM-2205
CM-1205
CM-3205
CM-3505
SPST maintained
CM-2210
CM-1210
CM-3210
CM-3510
SPDT momentary
CM-2220
CM-1220
CM-3220
CM-3520
SPDT maintained
CM-2230
CM-1230
CM-3230
CM-3530
(2) SPDT momentary
CM-2250
CM-1250
CM-3250
CM-3550
(2) SPDT maintained
CM-2260
CM-1260
CM-3260
CM-3560
SPDT momentary and
SPDT maintained
CM-2270
CM-1270
CM-3270
CM-3570
DPDT momentary
CM-2280
CM-1280
CM-3280
CM-3580
DPST 1-60 second pneumatic time delay
CM-2285
CM-1285
CM-3285
CM-3585
DPDT maintained
CM-2290
CM-1290
CM-3290
CM-3590
CM-2200
CM-1200
*Dual cylinder models are supplied with twice the number of switches, lock nuts, and mounting hardware than a single cylinder model.
UL61058-1, IEC 61058-2-4 and CAN/CSA-C22.2 Compliant
NOTE:
1. SPST–
Single Pole, Single Throw Switch may be ordered with normally open (N/O) or normally closed (N/C) contacts.
2. SPDT – Single Pole, Double Throw Switch may be wired normally open See page 31
for special
finishes and
led options
(N/O) or normally closed (N/C).
CM-3200
3. DPDT – Double Pole, Double Throw Switch may be wired normally open
(N/O) or normally closed (N/C).
CM-3500
(Shown with mortise
cylinders, sold separately)
American Disabilities Act Compliant
Camden
Door
Controls
Camden
Door
Controls
30
Pan
KEY SWITCHES
PARTS FOR CAMDEN KEY SWITCHES
Model
Description
CM-34AL
CM-1000/10
CM-1100/10
CM-2000/10
CM-1000/21
CM-2000/21
CM-1200/10
CM-2200/10
CM-3200/10
CM-3500/10
CM-1000/30
CM-1000/31
CM-1000/32
CM-1000/35
CM-1000/37
CM-1000/40
CM-1000/42
CM-1000/45
CM-1000/47
CM-1000/50
CM-1000/60KD
CM-1000/60KA
CM-1000/80KA
CX-1085
CM-307
CM-308
Surface mount box for CM-1000 (previously CM-1000/05)
Aluminum faceplate for CM-1000
Aluminum faceplate for CM-1100
Aluminum faceplate for CM-2000
Neoprene gasket for CM-1000, 1100, 1200
Neoprene gasket for CM-2000, 2200
Stainless Steel Faceplate for CM-1200
Stainless Steel Faceplate for CM-2200
Stainless Steel Faceplate for CM-3200
Stainless Steel Faceplate for CM-3500
SPST momentary contact switch, N/O, 6A @ 30V DC
SPST momentary contact switch, N/O, Heavy Duty, 15 A @ 30V DC
SPST momentary contact switch, N/C, 6A @ 30V DC
SPST maintained contact (on/off) switch, 6A @ 30V DC
SPST maintained contact switch, heavy duty, 15 A @ 30V DC
SPDT momentary contact switch, 6A @ 30V DC
DPDT momentary contact switch, 6A @ 30V DC
SPDT maintained contact switch, 6A @ 30V DC
DPDT maintained contact switch, 6A @ 30V DC
Cylinder lock ring
Mortise cylinder, 1 1/8”, solid brass, Schlage keyway,
aluminum finish, keyed different
Mortise cylinder as above, keyed alike, 10 pcs or less
Mortise cylinder, keyed alike, 11 pcs or more
1-60 second pneumatic time delay, DPST
Mortise cylinder housing for Best style IC core (special order)
Best style IC core, keyed different (special order)
Panto
P
LED OPTIONS / FINISHES
31
Model
Description
CM-XXXX-7012
CM-XXXX-7112
CM-XXXX-7212
CM-XXXX-7312
CM-XXXX-7412
CM-XXXX-7024
CM-XXXX-7124
CM-XXXX-7224
CM-XXXX-7324
CM-XXXX-7424
CM-XXXX-DUR
CM-XXXX-PB
Red 12V LED (add suffix 7012 to desired model number)
Green 12V LED (add suffix 7112 to desired model number)
Red and Green 12V LEDs (add suffix 7212 to desired model number)
Bi-color 12V LED (add suffix 7312 to desired model number)
Amber 12V LED (add suffix 7412 to desired model number)
Red 24V LED (add suffix 7024 to desired model number)
Green 24V LED (add suffix 7124 to desired model number)
Red and Green 24V LED’s (add suffix 7224 to desired model number)
Bi-color 24V LED (add suffix 7324 to desired model number)
Amber 24V LED (add suffix 7424 to desired model number)
Duranodic (US40) finish
Polished Brass finish (US3)
Product Guide I February 2011
CM-3000
Faceplate
(Shown with
optional LED)
CM-1000-DUR
ACCESSORIES
HEAVY DUTY POWER TRANSFER CABLES
Model Description
CM-PTS14
12” Length 1/4” Inside Diameter Cable, *US26, molded end caps
CM-PT14
CM-PT38
18” Length, 1/4” Inside Diameter Cable, *US26, aluminum end caps
CM-PTSS-7
CM-PTSS-12
CM-PTSS-18
7” Length, 1/4” Inside Diameter, *Stainless Steel Cable and end caps
12” Length, 1/4” Inside Diameter, *Stainless Steel Cable and end caps
18” Length, 1/4” Inside Diameter, *Stainless Steel Cable and end caps
CM-PT516M
18” Length, 3/8” Inside Diameter Cable, **US26, aluminum end caps
CM-PTS14
CM-PTSS38-7 7” Length, 3/8” Inside Diameter Cable, **US26, Stainless Steel Cable and end caps
CM-PTSS38-12 12” Length, 3/8” Inside Diameter Cable, **US26, Stainless Steel Cable and end caps
CM-PTSS38-18 18” Length, 3/8” Inside Diameter Cable, **US26, Stainless Steel Cable and end caps
CM-PT516M
Concealed Power Transfer Cable, 5/16” Inside Diameter, mortise mount
PTSS models are available in lengths up to 72”. Contact factory for pricing and delivery
* 1/4” ID. models for 4 conductor, 22 gauge or 2 conductor 18 gauge wire
** 3/8” ID. models for 16 conductor, 22 gauge or 8 conductor 18 gauge wire
CM-PT14
PRESSURE GAUGES
ModelDescription
CM-PG1
CM-PG2
CM-PG3
0-7 lb. pressure gauge
0-35 lb. pressure gauge
10-50 lb. pressure gauge
CM-PTSS-18
Use PG-1 to measure swing door closing
force, or switch activation force.
Use PG-2 to measure auto door opening
force (swinging, sliding or overhead).
Use PG-3 to measure opening force as well
as door sidelite breakout force.
CM-PG
Camden Door Controls
32
KEY
KEY PADS
SWITCHES
Pan
An extensive line of keypads ranging from light duty mechanical models to vandal and
weather proof piezo versions.
Panto
FEATURES
• Self-contained (one piece)
or separate controller
(two part) models
• Surface or flush mount
• Stand-alone, or wiegand
outputs
• Illuminated or non-illuminated
NEW
• Narrow or single gang widths
P
CM-120i
LIGHT/MEDIUM DUTY MODELS
Model CM-120i
CM-500SK
Max. Users
Mounting Outputs 999
500
Flush 2 form C
Surface 2 form C Voltage 12/24V AC/DC
12V AC/DC
Outdoor Use NO
YES
Illuminated
NO
NO
These models are not designed for high usage or vandal-resistant applications.
While CM-120i and 500SK may be used outdoors, they are not recommended for applications where there is
direct exposure to driving rain or snow.
CM-500SK
VANDAL RESISTANT MODELS
Model Max. Users
CM-100SS
100
CM-120W
999
CM-480K 480
CM-100SN V2
100
CM-100KPN V2
Mounting Outputs Voltage Surface 1 form C
12/24V AC/DC
Flush
2 form C
12/24V AC/DC
Surface 1 form C
12/24V AC/DC
Surface 2 form C, 1 N/O 12/24V AC/DC
Additional keypad for CM-100SN
Outdoor Use YES
YES
YES
YES
YES
Illuminated
YES
YES
YES
YES
YES
CM-100SS
NEW
CM-120W
CM-480K
CM-100SN V2
33
Product Guide I February 2011
American Disabilities Act Compliant
Camden Door Controls
33
KEY SWITCHES
KEY PADS
PIEZO models are fully sealed, and incorporate a patented one-piece design with no moving
parts. Lifetime warranty on all piezo models.
FEATURES
SPECIFICATIONS
• One-piece aluminum
housing
• T emperature:
-40°C to 125°C (-40°F to 257°F)
• 200 user codes,100 million
combinations
• Jamb width dimensions:
7 1/4” x 1 3/4” x 15/16”
(184 mm x 45 mm x 24 mm)
• Visual & audible feedback
during programming
• EEprom memory
NO MOVNG
PARTS
• S ingle gang dimensions:
5 1/4” x 3 5/16” x 3/4”
(133 mm x 85 mm x 19 mm)
• Heavy-duty form C relay
• Easy to install and use
CM-626
PIEZO - SELF CONTAINED (ONE PART)
Model Max. Users Mounting Outputs
Voltage Outdoor Use
Illuminated
CM-626S
200
Surface, Jamb
1 form C 12V AC, 12-24 VDC
YES
NO
CM-634
200
Surface, Single Gang
1 form C
12V AC, 12-24 VDC
YES
NO
CM-634i
200
Surface, Single Gang
1 form C
12V AC, 12-24 VDC
YES
YES
CM-634
PIEZO - WIEGAND OUTPUT
Model Max. Users
Mounting
CM-626SW
Unlimited
Surface Jamb CM-6268W
Unlimited
Surface Jamb
CM-634W
Unlimited
CM-634iW
Unlimited
Outputs
Voltage Outdoor Use
Illuminated
26 bit wiegand
12-24 VDC
YES
NO
8 bit wiegand
12-24 VDC
YES
NO
Surface, Single Gang
26 bit wiegand
12-24 VDC
YES
NO
Surface, Single Gang
26 bit wiegand
12-24 VDC
YES
YES
CM-634i
Illuminated
NOTE: Other wiegand outputs available on request.
American Disabilities Act Compliant
Camden
Door
Controls
Camden
Door
Controls
34
INDUSTRIAL DOOR AND
GATE CONTROLS
Door and Gate Controls are designed for use in factories, warehouses, and other industrial
applications. Models are UL/CSA listed, and most are NEMA rated for use in wet / outdoor
environments. For activating overhead doors, storefront grilles and shutters.
Tamper Resistant Key/Gate Switches include a heavy duty faceplate, die cast aluminum
enclosure with rubber gasket, 2 SPST momentary switches, (N/O) rated 3A @ 240V AC, and
cylinder with 2 keys. UL listed, CSA certified. Anti-tamper feature: housing can only be
opened with key. (KF amd KX series).
CI-1KF
KEY/GATE SWITCHES
Model Description
INTERIOR USE
CI-1KF
CI-1KFS
Flush mount key switch, NEMA 1 and 2
As above, with heavy duty stop button, NEMA 1 and 2
EXTERIOR USE
CI-1KX
CI-1KXS
CI-1KSMX
Diecast aluminum key switch, painted gray enamel,
NEMA 1, 2, 3R, 4, 6, 12, 13, and ICS
As above, with weatherized stop button
NEMA 1, 2, 3R, 4, 6, 12, 13, and ICS
Single gang enclosure, complete with spring loaded weather resistant cover
GATE SWITCHES
CI-GKS1
CI-GKS2
Post mounted gate switch, SPDT, 3 AMPS @ 240V AC,
die cast aluminum enclosure, black matte finish
As above, with 2 SPDT switches
CI-1KFS
CI-1KX
CI-1KSMX
CI-GKS1
35
Product Guide I February 2011
INDUSTRIAL DOOR AND
GATE CONTROLS
Mortise Cylinder Industrial Key Switch is designed to control grilles or gates where a
high-security cylinder is required. Works with all 1” – 1 1/4” mortise and IC core cylinders,
including Medeco, Best, Assa, Abloy, and Schlage. Includes double gang stainless steel faceplate,
2 x SPST N/O switches, red emergency STOP button, surface mount ABS box, rubber gasket,
and tamper proof screws. Mortise cylinder not included. For Best style housings and IC cores,
see P. 31.
MORTISE CYLINDER INDUSTRIAL KEY SWITCH
ModelDescription
CI-3502
Industrial Key Switch
CI-3502
PUSH BUTTON CONTROL STATIONS
ModelDescription
INTERIOR USE
CI-PBU3
CI-PBS3
3 Button, Open / Close / Stop, NEMA 1, surface mount, 5 AMP @ 240V AC
3 Button, Open / Close / Stop, NEMA 1, 3 AMP @ 250V AC,
stainless faceplate, flush or surface mount
EXTERIOR USE
CI-3BX
CI-3BXL 3 Button, Open / Close / Stop, UL / CSA rated, 3 AMP @ 240V AC, NEMA 4
As above, with key lockout
CI-PBU3
CI-PBS3
CI-3BXL
CEILING PULL SWITCHES
W
NE
ODEL
NOEDW
ELS
M
M
ModelDescription
CI-SCP1
(Replaces
CI-CP1)
CI-WPS1
Diecast aluminum enclosure, supplied with 20’ cord and pull handle, SPDT momentary, 3 AMP @ 240V AC. NEMA 1, 2, 3R, 4, 6, 12, 13, and ICS
CI-SCP1
Ceiling/wall pull switch with 360˚ rotating arm and pivoting cam.
Ideal for activating industrial doors or use by lift truck operators,
SPST momentary, 3 AMPS @ 240V AC, NEMA 4
CI-WPS1
Camden Door Controls
36
TELEPHONE/ACCESS CONTROL SYSTEM
CV-TAC400 provides a full array of ‘large system’ features, combining telephone entry
and card access at a remarkable ‘small system’ price. InVision TAC™ supports the addition
of card readers, elevator controls, RF controls and other wiegand devices, allowing for a
fully integrated building security system. CV-TAC400 has been designed for easy property
management. The system can be ordered for local (hardwire) programming via USB
connection, where there is on-site management. Or it can be supplied with a modem,
making it ideal for multiple building, off-site system management.
CV-TAC400 provides the ability to add fully integrated card access performance, easily
and affordably. Both the telephone entry and access control systems utilize a common
configuration and reporting software platform. CV-TAC400 is offered with a choice of HID/
AWID compatible card readers. Camden also has a wide selection of other wiegand readers,
keypads, and RF controls that may be used with the system.
For use in apartment/office buildings, condominiums, rec/sports centers, and other
applications where a combination of security and communications are required for
controlling resident and visitor traffic.
TELEPHONE ENTRY FEATURES
• Built-in electronic display, with 8 line tenant listing
• 500 name directory
• Full audit capability for all entrances and other
secured areas
• Master/slave configuration; up to 3 slave panels for
visitor parking, garages, etc.
• Supports PIN code access for emergency and
other services
• Built-in proximity reader (optional)
• Wiegand output (for integration with other
access control systems)
• Heavy-duty stainless steel faceplate
• Robust keypad with dedicated scroll and
call buttons
• Flush mount enclosure, with optional vandal/
rain hood.
• 15 digit dialing
• Optional stainless steel surface enclosure with
rain hood
•Supports after-hour auto attendant
• Local (via USB) or remote (via telephone modem)
programming
• Optional heater kit
ACCESS CONTROL FEATURES
• HID/AWID format card reader built into front
face of lobby panel, and up to 3 slave panels
37
• 20 time zones, 8 access levels, and holiday schedules
• 4000 audit transactions
• Up to 12 CV-TAC4WC Wiegand controllers, for
adding card readers or other Wiegand devices
(one device per controller)
• RS485 polling
• Up to 3,000 user codes
• Elevator control, up to 48 floors, 4 cabs per system
Product Guide I February 2011
• Supervised inputs throughout the system
CV-TAC 400
TELEPHONE/ACCESS CONTROL SYSTEM
ENTRY PANELS AND ENCLOSURES
Model
Description
CV-TAC400B
Master directory, 8 line electronic display, with USB/485 interface for local
programming/monitoring. Transformer, software included.
CV-TAC400M
Master directory, 8 line electronic display, with modem for off-site
programming/monitoring. Transformer, software included.
CV-TAC400S
Slave directory, 8 line electronic display with transformer.
CV-TAC4FB
Flush mount ‘Rough-In’ box
CV-TAC4SB
Surface mount enclosure, stainless steel
CV-TAC4FH
Vandal/rain resistant hood for flush or surface mount box, stainless steel
CV-TAC4FB
Flush Mount
'Rough-in' Box
PANEL ACCESSORIES
Model
Description
CV-TAC4USB
RS485/USB computer interface module (supplied with
CV-TAC400B) required for CV-TAC400M local programming
CV-TAC4H
Heater kit, includes transformer, for outdoor use -22F to +122F
(-30C to +50C)
CV-TAC4P
Handset, for privacy or noisy lobby environments
CV-TAC4SB
Surface Mount
Enclosure
PANEL MOUNT CARD READERS
Model
Description
CV-TAC4PRA
HID/AWID format prox reader, mounted in TAC400 Panel
ELEVATOR CONTROL
Model
Description
CV-TAC4EL
Elevator controller (one required per 16 floors, per cab)
CV-TAC4FH
Vandal / Rain Hood
(Use with flush or
surface mount enclosure)
NOTE: (1) CV-TAC4WC required for each elevator cab.
ACCESS CONTROL DEVICES, READERS AND CARDS
Model
Description
CV-TAC4WC
Wiegand controller for adding up to 12 remote prox readers, RF, or
keypads. Up to 4 additional wiegand controllers can be designated for
elevator cab control
CV-7400
HID/AWID format prox reader, mullion style, up to 4”-5” read range
CV-7820
AWID format prox reader, single gang, up to 6”-8” range
CV-CSA
AWID prox cards, clam shell style (100 per box)
CV-KTA
AWID prox key tag (25 per tube)
CV-5395
HID Thinline II low profile single gang reader, up to 4”-5” read range
CV-CSH
HID ProxCard II, clam shell style (100 per box)
CV-KTH
HID ProxKey tag (10 per tube)
NOTE: All prox cards and fobs are sold in multiples of 10 pcs. except CV-KTA (25 pcs.)
For additional prox readers and wiegand keypads, see page 42. TAC400 may be used with all
devices that provide a 26 bit wiegand output.
CV-TAC4WC
Wiegand Controller
CV-7400
Card Reader
CV-CSH
Cards
CV-5395
Card Reader
CV-KTH
Fobs
Camden Door Controls
38
TELEPHONE/ACCESS CONTROL SYSTEM
GUARD / CONCIERGE PHONE SYSTEM
This auto-dialer is designed for staffed locations, where an attendant will greet visitors,
call the resident’s suite for authorization, then allow/deny access accordingly. Up to
1000 suite capacity. Kit includes keypad and privacy handset/cradle. There is no directory
provided with this system.
GUARD / CONCIERGE PHONE SYSTEM
Model Description
CV-TAC400G
Auto dialer for guard (concierge) station, with software, keypad and handset For additional auto-dial and no phone bill solutions, contact the factory.
CV-TAC400G
TELEPHONE ENTRY / ACCESS CONTROL INTERFACE
CV-800 Serial to Wiegand Converters, provide a flexible and efficient way to integrate
a telephone entry system with an access control system, CV-800 works with virtually all
card access systems, and select models of Viscount, SES, and Sentex phone entry systems.
Building security is greatly enhanced as CV-800 allows the access control system to
manage/control the building entrance – not the telephone entry system. In addition,
CV-800 provides the building owner and manager with a complete audit trail of all
persons entering the building, as well as a record of residents granting visitors access via
the telephone entry system. CV-800 also monitors the postal lock switch.
TELEPHONE ENTRY / ACCESS CONTROL INTERFACE
Model
Description
CV-800EP
CV-800VE CV-800SES
CV-800SEN
For use with Viscount Enterphone 2000™ (requires firmware 2.4 or greater)
For use with Viscount Electra™
For use with SES TEC & CAT Series™
For use with Sentex Infinity Series™
CV-800EP
39
Product Guide I February 2011
SINGLE DOOR PROXIMITY
CARD READERS
CV-600 MPROX is Camden’s newest stand-alone proximity reader system. Designed for use in
industrial and commercial applications. MPROX provides excellent security and
functionality, and is easy to program and install.
MPROX consists of two parts: a vandal and weather resistant mullion-mount proximity
reader, and a small programmer/controller, which is installed on the secure side inside the
facility. An additional reader can be added for in-out control of a single door or for ease
of programming. The system has a capacity of 999 users. Cards/fobs can be individually
or batch enrolled/deleted. All programming is done through the controller and reader –
there is no need for computers or software to enroll or delete cardholders.
FEATURES
• Up to 999 users
• Bi-color LED and sounder
• Jamb-mount proximity reader
• Door open time: 1 - 180 seconds, or latching
• Vandal and water resistant reader (IP 67)
• Programming password (optional use)
• Reader and controller may be up to 200 ft
(70 metres) apart
• Form C (N/O + N/C) relay, 5 amps
CV-600R
• 12/24V AC/DC operation
• Operates with prox cards or fobs
• Presence Input (parking, mantrap applications)
• Request-To-Exit input (N/O)
Model
Description
CV-600
CV-600R
CV-CSH
CV-KTH
MPROX controller with CV-600R mullion prox reader, 1” - 2” read range
Reader only for CV-600
Prox card for CV-600 (100 per box
Prox key fob for CV-600 (10 per tube)
CV-601
CV-7400
CV-CSA
MPROX controller with CV-7400 mullion prox reader, 4” - 5” read range
Reader only for CV-601
Prox card for CV-601 (100 per box
CV-KTA
Prox key fob for CV-601 (25 per packet)
CV-7400
Note: All cards and fobs are sold in multiples of 10, except CV-KTA (25).
CV-500PPK V2 is a stand-alone, single door proximity reader with up to 500 users – cards,
fobs or keypad activation. Cards may be individually or block enrolled. Easy installation and
usage – software or hand-held programmers are not required. Optional stainless steel prox
reader is ideal for vandal-prone areas.
Model Max. Users Mounting
Outputs Voltage
CV-500PPK V2 500 Surface, Single Gang 1 form C 12V AC/DC CV-500AR
Auxiliary stainless steel reader for use with CV-500PPK
Outdoor Use
YES
YES
Vandal Resistant
NO
YES
CV-500PPK V2
Illuminated
NO
NO
CV-500AR
PROXIMITY CARDS FOR CV-500PPK
Model
Description
CV-500PC
CV-500PT
Proximity Card for CV-500PPK (100 per box)
Proximity plastic fob for CV-500PPK (20 per box).
CV-500PC/PT
Camden Door Controls
40
INVISION 32 ACCESS CONTROL
On-line distributed processing access control system for up to 64 doors. Kits include 2 door
controller, software, 2 proximity readers (choice of formats and read range), power supply,
and plug-in transformer (16V-40VA). Expandable to 128 doors with optional software module.
Model Description
KITS
CV-32
Control panel with software, power supply, and plug-in transformer CV-32H1
Control panel with software, power supply, plug-in transformer,
2 HID format mullion readers
CV-32H2
Control panel with software, power supply, plug-in transformer,
2 HID format single gang readers
CV-32A1
Control panel with software, power supply, plug-in transformer,
2 AWID compatible mullion readers
CV-32A2
Control panel with software, power supply, plug-in transformer,
2 AWID compatible single gang readers
OPTIONS
CV-128
Expands system to 128 reader capacity
CV-LNM
LAN interface module (TCP/IP)
CV-CCM
RS232 to RS485 converter. Enables computer to be hardwired up to 4000 ft from controller.
CV-RS485
CV-RS485 USB to RS485 converter. Enables computer to be hardwired up to 4000 ft from controller.
CV-SU
Firmware upgrade to 3.5
CV-RMOD Exit reader module
CV-ELCON
Elevator controller with one 8-floor relay board
CV-EL8
8 floor elevator module with wall-mount metal enclosure
CV-EL16
16 floor elevator module with wall-mount metal enclosure
HARDWARE
• Flash firmware technology for
easy upgrades
• Supports 2 card readers – card
reader/keypad combo per panel
• R-MOD enables in/out control of
one door on each reader port
• Stores up to 3,000 transactions
off-line
• Supports fully supervised communication via RS-232, RS-485
and TCP/IP
• 8 fully supervised programmable
inputs (4 state monitoring alarms)
41
Product Guide I February 2011
CV-32 A1
SOFTWARE
• 8 programmable outputs
• Reads 5 card formats per panel
• TCP/IP network ready
(CV-LNM required)
• 12V DC @ 2A power supply
(included)
• Battery back-up on system
memory
• HVAC and Lighting Control
• Elevator control 8 to 32 floors
(optional hardware required)
• Up to 64 reader capacity,
expandable to 128
• Unlimited global link
commands
• 5000 cardholders per panel
(upgradeable to 8000)
• Customized formats for
exporting reports
• 40 holiday schedules
• Advanced client-server design
with up to 10 simultaneous full
function clients over LAN/WAN
• Auto card expiry by date up
to five years in advance
• Multiple credentials per user
• Global and timed
anti-passback
• Time and attendance reports
• Multiple language – English,
French, Spanish and Chinese
• Muliple-site management
• Multi-swipe funtionality (2, 3,
and 4 swipes)
• Visitor management
• Photo badging (optional)
• Card import (from other
systems - optional)
INVISION 32 ACCESS CONTROL
Model Description
HID READERS
CV-5395
HID Thinline II low profile single gang reader, 4”-5” read range
CV-5455
HID ProxPro II, single gang reader, 6”-9” read range CV-5375
HID MaxiProx reader, 16”-29” read range
CV-653PR
HID Vandal proof prox reader
CV-5355KP
HID ProxPro with keypad
HID CARDS*
CV-CSH
HID Proxcard II, clam shell style (100 per box)
CV-KTH
HID Proxkey, key tag (10 per tube)
AWID READERS
CV-7500
AWID compatible prox reader, mullion style, 4”-5” read range
CV-7500P
Single gang adapter plate
AWID CARDS
CV-CSA
AWID prox card, clam shell style (100 per box)
CV-KTA
AWID prox key tag (25 per packet)
CV-7500
CV-653PR
CV-KTH
CV-5355KP
CV-5395
HID/AWID READER
CV-7400
CV-CSH
HID/AWID format prox reader, mullion style, up to 4”-5” read range
Cards and fobs are sold in multiples of 10, except CV-KTA (25).
*A full range of HID and AWID compatible prox readers and cards are available. Contact factory for details.
CV-7400
CV-634PR models integrate with most access control systems, and incorporate HID prox readers
with our patented piezo keypad technology. They read all standard HID card formats.
• Voltage: 5-12VDC
• Keypad Output: 8 bit or 26 bit Wiegand
• Current Draw: 150ma
• Temperature: -20°C to 75°C (-4°F to 158°F)
• Reader Output: HID Wiegand
• Dimensions: 4 3/4” x 3 1/2” x 3/4”
(120mm x 90mm x 20mm)
CV-634PR
PIEZO KEYPADS / HID PROX READERS
Model Max. Users Mounting
Outputs Voltage Outdoor Use Illuminated
CV-634PR
Unlimited
Surface, Single Gang Wiegand/26 bit keypad 5-12 V DC
YES
NO
CV-6348PR
Unlimited
Surface, Single Gang Wiegand/8 bit keypad
YES
NO
5-12 V DC
PIEZO KEYPADS - WIEGAND OUTPUT
Model Max. Users Mounting
Outputs Voltage Outdoor Use Illuminated
CM-626SW
Unlimited
Surface Jamb
26 bit wiegand 12-24 VDC
YES
NO
CM-6268W
Unlimited
Surface Jamb
8 bit wiegand 12-24 VDC
YES
NO
CM-634W
Unlimited
Surface, Single Gang 26 bit wiegand 12-24 VDC
YES
NO
CM-634iW
Unlimited
Surface, Single Gang 26 bit wiegand 12-24 VDC
YES
YES
CM-626SW
Camden Door Controls
42
COVERT FACIAL
IDENTIFICATION CAMERAS
NEXIT WATCHTM COVERT DOOR FRAME, HIGH RESOLUTION COLOR CAMERAS
Exit Watch is installed on the frame of the exit door, which is the ideal location to capture clear and
close-up video images. To all appearances, the unit is a typical height strip you would see anywhere.
Exit Watch provides positive facial identification - perfect for use in banks, restaurants, filling stations
and other retail applications.
The high quality optical lens and ultra-small high resolution CCD camera makes Exit Watch one of
the most advanced units available. The heavy duty, dark brown or silver steel case and back-screened
multi-color faceplate are designed to keep the unit looking new by protecting it in high traffic areas.
The adjustable/lockable swivel bracket mounts directly to the door frame, enabling Exit Watch to be
precisely adjusted for single or double door applications. Exit Watch provides clear and distinct
images to law enforcement agencies for identification needs.
The compact EX-7 (6.5” long) can be mounted on either the door frame or over the door (horizontally).
Exit Watch kit includes mounting hardware and 12 VDC regulated plug-in power transformer.
COVERT DOOR FRAME CAMERAS
Model
Description
CV-EX36
CV-EX36S
Color 525 TVL, 3.7mm lens, min. illum. 1 Lux @ f:2.0, dark brown case
Color 525 TVL, 3.7mm lens, min. illum. 1 Lux @ f:2.0, with silver (aluminum) finish
CV-EX7
CV-EX7S
Mini Cam, Color 525 TVL, 3.7mm lens, min. illum. 1 Lux @ f:2.0 , dark brown case
Mini Cam, Color 525 TVL, 3.7mm lens, min. illum. 1 Lux @ f:2.0 , with silver (aluminum) finish
Installed in minutes,
Exit Watch provides high
resolution images required
for identification purposes.
Now
available
in choice of
dark brown or
silver finish
CV-EX7
Lockable swivel
bracket allows
for single or
double door use.
CV-EX36
43
Product Guide I February 2011
PRODUCT INDEX
Model/Series
Description
EXPRESS INDUSTRIAL
CI-1K series
CI-3BX series
CI-3502
CI-SCP1
CI-GK series
CI-PB series
CI-WPSl
Key switches
Push button controls
Industrial key switch
Ceiling pull switch
Gate switches
Push button controls
Wall pull switch
Page Location
EXPRESS
CM-23
Jamb box
CM-25 series
Jamb push switches
CM-30/30EE series
Illuminated push buttons
CM-31
s/s sleeve for single gang box
CM-34AL/D
Single gang mounting boxes
CM-34BL
Single gang mounting box
CM-35 series
Single gang push switches
CM-40 series
4 1/2” round push switches
CM-41 series
4 1/2” round/square push switches
CM-42 series
Switch mounting posts
CM-43CBL
Double gang mounting box
CM-44
Offset jamb mounting box
CM-45 series
4 1/2” square push switches
CM-46 series
4 1/2” square push switches
CM-47
Round Surface mount box
CM-48
Surface mount kit
CM-48 series
Switch mounting posts
CM-49
Round surface/flush mount kit
CM-59S
Stainless steel escutcheon
CM-53
Double gang mounting box
CM-60 series
6” round push switches
CM-63CBL
Double gang mounting box
CM-64
Offset jamb mounting box
CM-66
s/s flush mount box
CM-67
s/s surface mount box
CM-68
Surface mount kit
CM-69S
Round surface mount box
CM-79
Round surface/flush mounting kit
CM-89S
s/s Escutcheon
CM-100SNKeypad
CM-100SSKeypad
CM-120 series
Keypads
CM-130
Rotary switch
CM-150 series
Push buttons w/enclosure
CM-160 series
Auto door key switches
CM-170 series
Auto door key switches
CM-180 series
Auto door key switches
CM-190 series
Toggle switches
CM-200 series
Horizontal switches
35
36
36
36
35
36
36
25
21
11
25
27
25
21
21
21
26
25
25
21
21
25
25
26
26
25
25
21
25
25
25
25
25
25
26
25
33
33
33
22
17
22
22
22
22
17
Model/Series
Description
Page Location
CM-250 series
Jamb push buttons
CM-280 series
Single gang push buttons
CM-300/310 series
Illuminated push buttons
CM-324
Hands-free switches
CM-400/410/420 series
Mushroom push buttons
CM-419
Request-to-exit sensors
CM-440
S/S dress plate
CM-480KKeypad
CM-480C
RF controller
CM-500SKKeypad
CM-520 series
Mushroom push buttons
CM-626 series
Piezo keypads
CM-634 series
Piezo keypads
CM-660 S/S dress plate
CM-700 series
Emergency pull stations
CM-700GL
Glass break rods
CM-720 series
Emergency pull stations
CM-810/820/830/840/850 Remote release switches
CM-1000 series
Surface mount key switches
CM-1100 series
Flush mount key switches
CM-1200 series
Flush mount key switches
CM-2000 series
Jamb key switches
CM-2200 series
Jamb key switches
CM-2510 series
Combo key/push switch
CM-2520 Vestibule switch
CM-3000/3100 series
Illuminated push buttons
CM-3200 series
Double gang key switches
CM-3500 series
Double gang key switches
CM-4000/4100 series
Mushroom push buttons
CM-5000 series
Mushroom palm buttons
CM-6000 series
Locking palm buttons
CM-7000/7100 series
Push buttons
CM-8000/8100 series
Push buttons
CM-9000/9100 series
Vandal resistant push buttons
CM-9200-9300 series
Piezo push buttons
CM-9600 series
Piezo push buttons
CM-9700 series
Piezo push buttons
CM-PG series
Pressure gauges
CM-PT series
Power transfer cables
CM-RFL
RF switch packages
CM-RX series
RF receivers
CM-TX series
RF transmitters
17
17
11
19
14
20
25
33
23
33
14
34
34
25
20
20
20
19
29
29
30
29
30
21
21
12
30
30
13
13
13
14
14
15
15
16
16
32
32
24
23
23
INVISION
CV-32 series
CV-500AR
CV-500PPK
CV-600/601
CV-634PR
41
40
40
40
42
Card access system
Prox reader
Prox reader
Single door proximity
Piezo keypad/prox
Camden Door Controls
44
PRODUCT INDEX
Model/Series
Description
CV-653PR
CV-800 CV-7400
CV-7500
CV-EX7 CV-EX36
CV-TAC400 Prox reader
Phone/access system interface
Prox reader
Prox reader
Exit watch mini camera
Exit watch door frame camera
Telephone entry system
EXACT
CX-12
Switching network
CX-22
Bi-directional sequencer
CX-90 series
Mag locks
CX-91 series
Mag locks
CX-92 series
Mag locks
CX-93 series
Gate lock
CX-94 series
Shear lock
CX-247 series
7 day timers
CX-1000/74
Time delay
CX-1000/75
Time delay
CX-1000/77
Time delay
CX-1000/78
Time delay
CX-1085
Pneumatic Timers
CX-5024Rectifier
CX-ED1000
Electric strikes
Page Location
42
39
42
42
43
43
37
8
9
5
5
5
5
5
7
7
7
7
7
8
10
3
Model/Series
Description
CX-EL1400
CX-EL2000
CX-EL2200
CX-EL3000
CX-EL4000
CX-EL8000
CX-EMF2
CX-EU2000
CX-PC6
CX-PS series
CX-SAI
CX-TRN series
CX-TRP series
CX-TRX series
CX-WC series
Electric strikes
Electric strikes
Electric strikes
Electric strikes
Electric strikes
Cabinet Locks
Multi-function relay
Electric strikes
Lock-out relay
Power supplies
Switching network
Transformers
Transformers
Transformers
Restroom control kit
Page Location
PARTS & ACCESSORIES
Electric strikes, faceplates
Key switch parts
LED’s/replacement bulbs
Mag lock accessories
Push button parts
Tamper proof screws
TERMS AND CONDITIONS
Freight: All goods are shipped F.O.B. Camden warehouses. Deliveries are made via FedEx / UPS ground service, unless otherwise specified by customer.
Customer must make any claims for damage in transit or missing boxes directly with the transport company. Claims for packing and/or ordering errors
should be made directly to Camden within ten days of receipt of merchandise.
Return Policy: Returns will not be accepted unless accompanied by a Return Goods Authorization (RGA) number. Contact factory for details.
Warranty: All Camden product carry a 3 year warranty. Electric strikes offer a 5 year warranty. Piezo electric switches and magnetic locks carry
a free lifetime warranty. This warranty applies to products that have failed in the course of normal use, and not the result of improper installation
or vandalism. Upon inspection, Camden will repair / replace returned goods, or issue credit. Returns must be shipped freight prepaid, and will be
returned freight prepaid. Please note any shipment sent to Camden freight collect, will be refused. All returns must be accompanied by a returned goods
authorization (RGA). Contact Camden for details.
Effective: February 1, 2011
45
Product Guide I February 2011
3
3
3
4
4
4
9
3
8
10
8
10
10
10
9
4
31
18
6
18
18